0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-14 13:50:46 +00:00
qmk_firmware/keyboards/keebio/bamfk1
Ryan 7e0299117b
Move encoder config to data driven ()
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps VIA Protocol 12 + fixes () 2023-02-23 09:19:00 +11:00
config.h Move encoder config to data driven () 2023-02-26 09:45:12 +11:00
info.json Move encoder config to data driven () 2023-02-26 09:45:12 +11:00
readme.md RESET -> QK_BOOT keyboard readme () 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven () 2023-02-08 18:41:46 +11:00

BAMFK-1

bamfk1

PCB for the Big Switch with support for horizontal rotary encoders.

  • Keyboard Maintainer: Keebio
  • Hardware Supported: BAMFK-1 PCB
  • Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/bamfk1:default

Flashing example for this keyboard:

make keebio/bamfk1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available