gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-22 03:19:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
42f1763db9
qmk_firmware/keyboards/keebio/nyquistpad
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Migrate RGB Matrix config to info.json - K (#22911) 2024-02-01 12:05:29 +00:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
readme.md Add Nyquistpad (#21578) 2023-07-24 20:46:03 -06:00

readme.md

Nyquistpad

A 5x6 macropad keyboard based off of a prototype Nyquist PCB.

  • Keyboard Maintainer: Keebio
  • Hardware Supported: Nyquistpad PCB
  • Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/nyquistpad:default

Flashing example for this keyboard:

make keebio/nyquistpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Press and hold the button on the back of the PCB for at least 2 seconds and let go, or double-press the button
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available