mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-01 15:35:52 +00:00

History

Ryan 9884e4982b Rename RGB/HSV structs: keyboard-level code (#24476 )		2024-10-12 19:00:56 +01:00
..
graphics
keymaps/default	Remove all via-enabled keymaps, including `via`. (#24322 )	2024-08-26 07:51:22 +10:00
rev1	Migrate split.soft_serial_pin to split.serial.pin O-Z (#24146 )	2024-07-23 12:12:52 +01:00
rev2	Migrate SPLIT_HAND_PIN to json (#23924 )	2024-07-13 13:29:16 +01:00
config.h	WS2812 PWM: prefix for DMA defines (#23111 )	2024-03-02 17:16:47 +00:00
djinn_portscan_matrix.c	Update GPIO API usage in keyboard code (#23361 )	2024-05-03 15:21:29 +10:00
djinn_split_sync.c	Remove more unnecessary `quantum.h` includes (#23402 )	2024-04-05 14:48:21 +11:00
djinn_usbpd.c	Remove more unnecessary `quantum.h` includes (#23402 )	2024-04-05 14:48:21 +11:00
djinn.c	Rename RGB/HSV structs: keyboard-level code (#24476 )	2024-10-12 19:00:56 +01:00
djinn.h
halconf.h
info.json	Migrate SERIAL_DRIVER to json (#23925 )	2024-07-13 13:12:35 +01:00
mcuconf.h
readme.md
rules.mk	Migrate SERIAL_DRIVER to json (#23925 )	2024-07-13 13:12:35 +01:00

readme.md

Djinn

The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.

Keyboard Maintainer: tzarc
Hardware Supported: Djinn: rev1, rev2
Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/djinn/rev2:default

Flashing example for this keyboard:

make tzarc/djinn/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the top-left key and plug in the keyboard.
Physical reset button: Briefly press the button on the back of the PCB.
Keycode in layout: Press the key mapped to QK_BOOT if it is available.