mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-11 20:31:02 +00:00
220 lines
16 KiB
Markdown
220 lines
16 KiB
Markdown
# QMK Firmware XAP Specs
|
|
|
|
This document describes the requirements of the QMK XAP ("extensible application protocol") API.
|
|
|
|
## Types
|
|
|
|
**All integral types are little-endian.**
|
|
|
|
| Name | Definition |
|
|
| -- | -- |
|
|
| _struct{}_ | A structure of data, packing different objects together. Data is "compacted" -- there are no padding bytes between fields. Equivalent to a packed C-style `struct`. The order in which they're defined matches the order of the data in the response packet. |
|
|
| _type[n]_ | An array of `type`, with array extent of `N` -- e.g. `u8[2]` signifies two consecutive octets. |
|
|
| _u16_ | An unsigned 16-bit integral, commonly seen as `uint16_t` from _stdint.h_. |
|
|
| _u32_ | An unsigned 32-bit integral, commonly seen as `uint32_t` from _stdint.h_. |
|
|
| _u64_ | An unsigned 64-bit integral, commonly seen as `uint64_t` from _stdint.h_. |
|
|
| _u8_ | An unsigned 8-bit integral (octet, or byte), commonly seen as `uint8_t` from _stdint.h_. |
|
|
|
|
## Definitions
|
|
|
|
This list defines the terms used across the entire set of XAP protocol documentation.
|
|
|
|
| Name | Definition |
|
|
| -- | -- |
|
|
| _Capability_ | A way to determine if certain functionality is enabled in the firmware. Any _subsystem_ that provides build-time restriction of functionality must provide a _route_ for a _capabilities query_. |
|
|
| _Handler_ | A piece of code that is executed when a specific _route_ is received. |
|
|
| _Payload_ | Any received data appended to the _route_, which gets delivered to the _handler_ when received. |
|
|
| _Response_ | The data sent back to the host during execution of a _handler_. |
|
|
| _Route_ | A sequence of _IDs_ describing the route to invoke a _handler_. |
|
|
| _Secure Route_ | A _route_ which has potentially destructive consequences, necessitating prior approval by the user before executing. |
|
|
| _Subsystem_ | A high-level area of functionality within XAP. |
|
|
| _Unlock sequence_ | A physical sequence initiated by the user to enable execution of _secure routes_. |
|
|
| _Broadcast Header_ | Packet format for broadcast messages. Takes the format:<br>`token` - token<br>`u8` - type<br>`u8` - length |
|
|
| _ID_ | A single octet / 8-bit byte, representing Subsystem or Route index. |
|
|
| _Request Header_ | Packet format for inbound data. Takes the format:<br>`token` - token<br>`u8` - length |
|
|
| _Response Flags_ | An `u8` containing the status of the request. |
|
|
| _Response Header_ | Packet format for outbound data. Takes the format:<br>`token` - token<br>`response_flags` - flags<br>`u8` - length |
|
|
| _Token_ | A `u16` associated with a specific request as well as its corresponding response. Valid token values are within the range `0x0100`-`0xFFFF`. |
|
|
|
|
## Requests and Responses
|
|
|
|
Communication generally follows a request/response pattern.
|
|
|
|
Each request needs to include a _token_ -- this `u16` value prefixes each outbound request from the host application and its corresponding response.
|
|
This allows response messages to be correlated with their request, even if multiple host applications are communicating with the firmware simultaneously.
|
|
Host applications should randomly generate a token ID for **every** outbound request, unless using a reserved token defined below.
|
|
To ensure host interoperability, valid token values are within the range `0x0100`-`0xFFFF`.
|
|
|
|
This token is followed by a `u8` signifying the length of data in the request.
|
|
|
|
Two token values are reserved: `0xFFFE` and `0xFFFF`:
|
|
* `0xFFFE`: A message sent by a host application may use this token if no response is to be sent -- a "fire and forget" message.
|
|
* `0xFFFF`: Signifies a "broadcast" message sent by the firmware without prompting from the host application. Broadcast messages are defined later in this document.
|
|
|
|
Any request will generate at least one corresponding response, with the exception of messages using reserved tokens. Maximum total message length is 128 bytes due to RAM constraints.
|
|
|
|
Response messages will always be prefixed by the originating request _token_, directly followed by that request's _response flags_, then the response payload length:
|
|
|
|
| Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
|
|
| -- | -- | -- | -- | -- | -- | -- | -- |
|
|
| `-` | `-` | `-` | `-` | `-` | `-` | `SECURE_FAILURE` | `SUCCESS` |
|
|
|
|
* Bit 1 (`SECURE_FAILURE`): When this bit is set, the requested _route_ was marked _secure_ but an _unlock sequence_ has not completed.
|
|
* Bit 0 (`SUCCESS`): When this bit is set, the request was successfully handled. If not set, all payload data should be disregarded, and the request retried if appropriate (with a new token).
|
|
|
|
|
|
### Example "conversation":
|
|
|
|
**Request** -- version query:
|
|
|
|
| Byte | 0 | 1 | 2 | 3 | 4 |
|
|
| --- | --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Payload Length | Route | Route |
|
|
| **Value** | `0x43` | `0x2B` | `0x02` | `0x00` | `0x00` |
|
|
|
|
**Response** -- matching token, successful flag, payload of `0x03170192` = 3.17.192:
|
|
|
|
| Byte | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Response Flags | Payload Length | Payload | Payload | Payload | Payload |
|
|
| **Value** | `0x43` | `0x2B` | `0x01` | `0x04` | `0x92` | `0x01` | `0x17` | `0x03` |
|
|
|
|
## Routes
|
|
|
|
Subsystem validity should be queried through the “Enabled-in-firmware subsystem query” under the QMK subsystem (route=0x00,0x01).
|
|
This is the primary method for determining if a subsystem has been enabled in the running firmware.
|
|
|
|
|
|
### XAP - `0x00`
|
|
This subsystem is always present, and provides the ability to query information about the XAP protocol of the connected device.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Version Query | `0x00 0x00` | |__Response:__ `u32`| XAP protocol version query.<br><br>* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`<br> * e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.|
|
|
| Capabilities Query | `0x00 0x01` | |__Response:__ `u32`| XAP subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Enabled subsystem query | `0x00 0x02` | |__Response:__ `u32`| XAP protocol subsystem query. Each bit should be considered as a "usable" subsystem. For example, checking `(value & (1 << XAP_ROUTE_QMK) != 0)` means the QMK subsystem is enabled and available for querying.|
|
|
| Secure Status | `0x00 0x03` | |__Response:__ `u8`| Query secure route status<br><br>* 0 means secure routes are disabled<br>* 1 means unlock sequence initiated but incomplete<br>* 2 means secure routes are allowed<br>* any other value should be interpreted as disabled|
|
|
| Secure Unlock | `0x00 0x04` | || Initiate secure route unlock sequence|
|
|
| Secure Lock | `0x00 0x05` | || Disable secure routes|
|
|
|
|
### QMK - `0x01`
|
|
This subsystem is always present, and provides the ability to address QMK-specific functionality.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Version Query | `0x01 0x00` | |__Response:__ `u32`| QMK protocol version query.<br><br>* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`<br> * e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.|
|
|
| Capabilities Query | `0x01 0x01` | |__Response:__ `u32`| QMK subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Board identifiers | `0x01 0x02` | |__Response:__<br> * Vendor ID: `u16`<br> * Product ID: `u16`<br> * Product Version: `u16`<br> * QMK Unique Identifier: `u32`| Retrieves the set of identifying information for the board.|
|
|
| Board Manufacturer | `0x01 0x03` | |__Response:__ `string`| Retrieves the name of the manufacturer|
|
|
| Product Name | `0x01 0x04` | |__Response:__ `string`| Retrieves the product name|
|
|
| Config Blob Length | `0x01 0x05` | |__Response:__ `u16`| Retrieves the length of the configuration data bundled within the firmware|
|
|
| Config Blob Chunk | `0x01 0x06` | |__Request:__ `u16`<br><br>__Response:__ `u8[32]`| Retrieves a chunk of the configuration data bundled within the firmware|
|
|
| Jump to bootloader | `0x01 0x07` | __Secure__ |__Response:__ `u8`| Jump to bootloader<br><br>May not be present - if QMK capabilities query returns “true”, then jump to bootloader is supported<br><br>* 0 means secure routes are disabled, and should be considered as a failure<br>* 1 means successful, board will jump to bootloader|
|
|
| Hardware Identifier | `0x01 0x08` | |__Response:__ `u32[4]`| Retrieves a unique identifier for the board.|
|
|
| Reinitialize EEPROM | `0x01 0x09` | __Secure__ |__Response:__ `u8`| Reinitializes the keyboard's EEPROM (persistent memory)<br><br>May not be present - if QMK capabilities query returns “true”, then reinitialize is supported<br><br>* 0 means secure routes are disabled, and should be considered as a failure<br>* 1 means successful, board will reinitialize and then reboot|
|
|
|
|
### Keyboard - `0x02`
|
|
This subsystem is always present, and reserved for vendor-specific functionality. No routes are defined by XAP.
|
|
|
|
|
|
### User - `0x03`
|
|
This subsystem is always present, and reserved for user-specific functionality. No routes are defined by XAP.
|
|
|
|
|
|
### Keymap - `0x04`
|
|
This subsystem allows for query of currently configured keycodes.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x04 0x01` | |__Response:__ `u32`| Keymap subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Get Layer Count | `0x04 0x02` | |__Response:__ `u8`| Query maximum number of layers that can be addressed within the keymap.|
|
|
| Get Keycode | `0x04 0x03` | |__Request:__<br> * Layer: `u8`<br> * Row: `u8`<br> * Column: `u8`<br><br>__Response:__ `u16`| Query the Keycode at the requested location.|
|
|
| Get Encoder Keycode | `0x04 0x04` | |__Request:__<br> * Layer: `u8`<br> * Encoder: `u8`<br> * Clockwise: `u8`<br><br>__Response:__ `u16`| Query the Keycode at the requested location.|
|
|
|
|
### Remapping - `0x05`
|
|
This subsystem allows for live reassignment of keycodes without rebuilding the firmware.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x05 0x01` | |__Response:__ `u32`| Remapping subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Get Layer Count | `0x05 0x02` | |__Response:__ `u8`| Query maximum number of layers that can be addressed within the keymap.|
|
|
| Set Keycode | `0x05 0x03` | __Secure__ |__Request:__<br> * Layer: `u8`<br> * Row: `u8`<br> * Column: `u8`<br> * Keycode: `u16`| Modify the Keycode at the requested location.|
|
|
| Set Encoder Keycode | `0x05 0x04` | __Secure__ |__Request:__<br> * Layer: `u8`<br> * Encoder: `u8`<br> * Clockwise: `u8`<br> * Keycode: `u16`| Modify the Keycode at the requested location.|
|
|
|
|
### Lighting - `0x06`
|
|
This subsystem allows for control over the lighting subsystem.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x06 0x01` | |__Response:__ `u32`| Lighting subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
|
|
#### backlight - `0x06 0x02`
|
|
This subsystem allows for control over the backlight subsystem.
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x06 0x02 0x01` | |__Response:__ `u32`| backlight subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Get Enabled Effects | `0x06 0x02 0x02` | |__Response:__ `u8`| Each bit should be considered as a "usable" effect id|
|
|
| Get Config | `0x06 0x02 0x03` | |__Response:__<br> * enable: `u8`<br> * mode: `u8`<br> * val: `u8`| Query the current config.|
|
|
| Set Config | `0x06 0x02 0x04` | |__Request:__<br> * enable: `u8`<br> * mode: `u8`<br> * val: `u8`| Set the current config.|
|
|
| Save Config | `0x06 0x02 0x05` | || Save the current config.|
|
|
|
|
#### rgblight - `0x06 0x03`
|
|
This subsystem allows for control over the rgblight subsystem.
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x06 0x03 0x01` | |__Response:__ `u32`| rgblight subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Get Enabled Effects | `0x06 0x03 0x02` | |__Response:__ `u64`| Each bit should be considered as a "usable" effect id|
|
|
| Get Config | `0x06 0x03 0x03` | |__Response:__<br> * enable: `u8`<br> * mode: `u8`<br> * hue: `u8`<br> * sat: `u8`<br> * val: `u8`<br> * speed: `u8`| Query the current config.|
|
|
| Set Config | `0x06 0x03 0x04` | |__Request:__<br> * enable: `u8`<br> * mode: `u8`<br> * hue: `u8`<br> * sat: `u8`<br> * val: `u8`<br> * speed: `u8`| Set the current config.|
|
|
| Save Config | `0x06 0x03 0x05` | || Save the current config.|
|
|
|
|
#### rgbmatrix - `0x06 0x04`
|
|
This subsystem allows for control over the rgb matrix subsystem.
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Capabilities Query | `0x06 0x04 0x01` | |__Response:__ `u32`| rgb matrix subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
|
|
| Get Enabled Effects | `0x06 0x04 0x02` | |__Response:__ `u64`| Each bit should be considered as a "usable" effect id|
|
|
| Get Config | `0x06 0x04 0x03` | |__Response:__<br> * enable: `u8`<br> * mode: `u8`<br> * hue: `u8`<br> * sat: `u8`<br> * val: `u8`<br> * speed: `u8`<br> * flags: `u8`| Query the current config.|
|
|
| Set Config | `0x06 0x04 0x04` | |__Request:__<br> * enable: `u8`<br> * mode: `u8`<br> * hue: `u8`<br> * sat: `u8`<br> * val: `u8`<br> * speed: `u8`<br> * flags: `u8`| Set the current config.|
|
|
| Save Config | `0x06 0x04 0x05` | || Save the current config.|
|
|
|
|
|
|
## Broadcast messages
|
|
|
|
Broadcast messages may be sent by the firmware to the host, without a corresponding inbound request. Each broadcast message uses the token `0xFFFF`, and does not expect a response from the host. Tokens are followed by an _ID_ signifying the type of broadcast, with corresponding _payload_.
|
|
|
|
|
|
### Log message - `0x00`
|
|
Replicates and replaces the same functionality as if using the standard QMK `CONSOLE_ENABLE = yes` in `rules.mk`. Normal prints within the firmware will manifest as log messages broadcast to the host. `hid_listen` will not be functional with XAP enabled.
|
|
|
|
Log message payloads include a `u8` signifying the length of the text, followed by the `u8[Length]` containing the text itself.
|
|
|
|
**Example Log Broadcast** -- log message "Hello QMK!"
|
|
|
|
| Byte | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
|
|
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Broadcast Type | Length | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload | Payload |
|
|
| **Value** | `0xFF` | `0xFF` | `0x00` | `0x0A`(10) | `0x48`(H) | `0x65`(e) | `0x6C`(l) | `0x6C`(l) | `0x6F`(o) | `0x20`( ) | `0x51`(Q) | `0x4D`(M) | `0x4B`(K) | `0x21`(!) |
|
|
### Secure Status - `0x01`
|
|
Secure status has changed. Payloads include a `u8` matching a 'Secure Status' request.
|
|
|
|
**Example Secure Status Broadcast** -- secure "Unlocking"
|
|
|
|
| Byte | 0 | 1 | 2 | 3 |
|
|
| --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Broadcast Type | Secure Status |
|
|
| **Value** | `0xFF` | `0xFF` | `0x01` | `0x01` |
|
|
### Keyboard - `0x02`
|
|
Reserved for vendor-specific functionality. No messages are defined by XAP.
|
|
### User - `0x03`
|
|
Reserved for user-specific functionality. No messages are defined by XAP.
|
|
|