mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-04 17:05:17 +00:00
a304a9b51e
...partially reverts 580bcff4f6
as the
datasheet doesn't claim that the angle tuning as limited to +/- 30
degrees.
220 lines
5.8 KiB
C
220 lines
5.8 KiB
C
// Copyright 2022 Daniel Kao (dkao)
|
|
// Copyright 2022 Stefan Kerkmann (KarlK90)
|
|
// Copyright 2022 Ulrich Spörlein (@uqs)
|
|
// Copyright 2021 Alabastard (@Alabastard-64)
|
|
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
|
// Copyright 2019 Sunjun Kim
|
|
// Copyright 2020 Ploopy Corporation
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "debug.h"
|
|
#include "pmw33xx_common.h"
|
|
#include "print.h"
|
|
#include "string.h"
|
|
#include "wait.h"
|
|
#include "spi_master.h"
|
|
#include "progmem.h"
|
|
|
|
extern const uint8_t pmw33xx_firmware_data[PMW33XX_FIRMWARE_LENGTH] PROGMEM;
|
|
extern const uint8_t pmw33xx_firmware_signature[3] PROGMEM;
|
|
|
|
static const pin_t cs_pins[] = PMW33XX_CS_PINS;
|
|
static bool in_burst[sizeof(cs_pins) / sizeof(pin_t)] = {0};
|
|
|
|
const size_t pmw33xx_number_of_sensors = sizeof(cs_pins) / sizeof(pin_t);
|
|
|
|
bool __attribute__((cold)) pmw33xx_upload_firmware(uint8_t sensor);
|
|
bool __attribute__((cold)) pmw33xx_check_signature(uint8_t sensor);
|
|
|
|
void pmw33xx_set_cpi_all_sensors(uint16_t cpi) {
|
|
for (uint8_t sensor = 0; sensor < pmw33xx_number_of_sensors; sensor++) {
|
|
pmw33xx_set_cpi(sensor, cpi);
|
|
}
|
|
}
|
|
|
|
bool pmw33xx_spi_start(uint8_t sensor) {
|
|
if (!spi_start(cs_pins[sensor], false, 3, PMW33XX_SPI_DIVISOR)) {
|
|
spi_stop();
|
|
return false;
|
|
}
|
|
// tNCS-SCLK, 10ns
|
|
wait_us(1);
|
|
return true;
|
|
}
|
|
|
|
bool pmw33xx_write(uint8_t sensor, uint8_t reg_addr, uint8_t data) {
|
|
if (!pmw33xx_spi_start(sensor)) {
|
|
return false;
|
|
}
|
|
|
|
if (reg_addr != REG_Motion_Burst) {
|
|
in_burst[sensor] = false;
|
|
}
|
|
|
|
// send address of the register, with MSBit = 1 to indicate it's a write
|
|
uint8_t command[2] = {reg_addr | 0x80, data};
|
|
if (spi_transmit(command, sizeof(command)) != SPI_STATUS_SUCCESS) {
|
|
return false;
|
|
}
|
|
|
|
// tSCLK-NCS for write operation is 35us
|
|
wait_us(35);
|
|
spi_stop();
|
|
|
|
// tSWW/tSWR (=18us) minus tSCLK-NCS. Could be shortened, but it looks like
|
|
// a safe lower bound
|
|
wait_us(145);
|
|
return true;
|
|
}
|
|
|
|
uint8_t pmw33xx_read(uint8_t sensor, uint8_t reg_addr) {
|
|
if (!pmw33xx_spi_start(sensor)) {
|
|
return 0;
|
|
}
|
|
|
|
// send adress of the register, with MSBit = 0 to indicate it's a read
|
|
spi_write(reg_addr & 0x7f);
|
|
// tSRAD (=160us)
|
|
wait_us(160);
|
|
uint8_t data = spi_read();
|
|
|
|
// tSCLK-NCS, 120ns
|
|
wait_us(1);
|
|
spi_stop();
|
|
|
|
// tSRW/tSRR (=20us) mins tSCLK-NCS
|
|
wait_us(19);
|
|
return data;
|
|
}
|
|
|
|
bool pmw33xx_check_signature(uint8_t sensor) {
|
|
uint8_t signature_dump[3] = {
|
|
pmw33xx_read(sensor, REG_Product_ID),
|
|
pmw33xx_read(sensor, REG_Inverse_Product_ID),
|
|
pmw33xx_read(sensor, REG_SROM_ID),
|
|
};
|
|
|
|
return memcmp(pmw33xx_firmware_signature, signature_dump, sizeof(signature_dump)) == 0;
|
|
}
|
|
|
|
bool pmw33xx_upload_firmware(uint8_t sensor) {
|
|
// Datasheet claims we need to disable REST mode first, but during startup
|
|
// it's already disabled and we're not turning it on ...
|
|
// pmw33xx_write(REG_Config2, 0x00); // disable REST mode
|
|
if (!pmw33xx_write(sensor, REG_SROM_Enable, 0x1d)) {
|
|
return false;
|
|
}
|
|
wait_ms(10);
|
|
pmw33xx_write(sensor, REG_SROM_Enable, 0x18);
|
|
|
|
if (!pmw33xx_spi_start(sensor)) {
|
|
return false;
|
|
}
|
|
|
|
spi_write(REG_SROM_Load_Burst | 0x80);
|
|
wait_us(15);
|
|
|
|
for (size_t i = 0; i < PMW33XX_FIRMWARE_LENGTH; i++) {
|
|
spi_write(pgm_read_byte(pmw33xx_firmware_data + i));
|
|
wait_us(15);
|
|
}
|
|
wait_us(200);
|
|
|
|
pmw33xx_read(sensor, REG_SROM_ID);
|
|
pmw33xx_write(sensor, REG_Config2, 0x00);
|
|
|
|
return true;
|
|
}
|
|
|
|
bool pmw33xx_init(uint8_t sensor) {
|
|
if (sensor >= pmw33xx_number_of_sensors) {
|
|
return false;
|
|
}
|
|
spi_init();
|
|
|
|
// power up, need to first drive NCS high then low. the datasheet does not
|
|
// say for how long, 40us works well in practice.
|
|
if (!pmw33xx_spi_start(sensor)) {
|
|
return false;
|
|
}
|
|
wait_us(40);
|
|
spi_stop();
|
|
wait_us(40);
|
|
|
|
if (!pmw33xx_write(sensor, REG_Power_Up_Reset, 0x5a)) {
|
|
return false;
|
|
}
|
|
wait_ms(50);
|
|
|
|
// read registers and discard
|
|
pmw33xx_read(sensor, REG_Motion);
|
|
pmw33xx_read(sensor, REG_Delta_X_L);
|
|
pmw33xx_read(sensor, REG_Delta_X_H);
|
|
pmw33xx_read(sensor, REG_Delta_Y_L);
|
|
pmw33xx_read(sensor, REG_Delta_Y_H);
|
|
|
|
if (!pmw33xx_upload_firmware(sensor)) {
|
|
dprintf("PMW33XX (%d): firmware upload failed!\n", sensor);
|
|
return false;
|
|
}
|
|
|
|
spi_stop();
|
|
|
|
wait_ms(10);
|
|
pmw33xx_set_cpi(sensor, PMW33XX_CPI);
|
|
|
|
wait_ms(1);
|
|
|
|
pmw33xx_write(sensor, REG_Config2, 0x00);
|
|
pmw33xx_write(sensor, REG_Angle_Tune, CONSTRAIN(ROTATIONAL_TRANSFORM_ANGLE, -127, 127));
|
|
pmw33xx_write(sensor, REG_Lift_Config, PMW33XX_LIFTOFF_DISTANCE);
|
|
|
|
if (!pmw33xx_check_signature(sensor)) {
|
|
dprintf("PMW33XX (%d): firmware signature verification failed!\n", sensor);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
pmw33xx_report_t pmw33xx_read_burst(uint8_t sensor) {
|
|
pmw33xx_report_t report = {0};
|
|
|
|
if (sensor >= pmw33xx_number_of_sensors) {
|
|
return report;
|
|
}
|
|
|
|
if (!in_burst[sensor]) {
|
|
dprintf("PMW33XX (%d): burst\n", sensor);
|
|
if (!pmw33xx_write(sensor, REG_Motion_Burst, 0x00)) {
|
|
return report;
|
|
}
|
|
in_burst[sensor] = true;
|
|
}
|
|
|
|
if (!pmw33xx_spi_start(sensor)) {
|
|
return report;
|
|
}
|
|
|
|
spi_write(REG_Motion_Burst);
|
|
wait_us(35); // waits for tSRAD_MOTBR
|
|
|
|
spi_receive((uint8_t*)&report, sizeof(report));
|
|
|
|
// panic recovery, sometimes burst mode works weird.
|
|
if (report.motion.w & 0b111) {
|
|
in_burst[sensor] = false;
|
|
}
|
|
|
|
spi_stop();
|
|
|
|
if (debug_config.mouse) {
|
|
dprintf("PMW33XX (%d): motion: 0x%x dx: %i dy: %i\n", sensor, report.motion.w, report.delta_x, report.delta_y);
|
|
}
|
|
|
|
report.delta_x *= -1;
|
|
report.delta_y *= -1;
|
|
|
|
return report;
|
|
}
|