qmk_firmware/keyboards/dumbpad
Drashna Jaelre a0fed0ea17
Convert Encoder callbacks to be boolean functions (#12805)
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2021-05-21 23:17:32 -07:00
..
v0x Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
v0x_dualencoder Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
v0x_right Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
v1x Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
v1x_dualencoder Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
v1x_right Convert Encoder callbacks to be boolean functions (#12805) 2021-05-21 23:17:32 -07:00
config.h dumbpad refactor - adding support for various PCB revisions (#9259) 2021-03-04 20:25:19 -08:00
readme.md dumbpad refactor - adding support for various PCB revisions (#9259) 2021-03-04 20:25:19 -08:00
rules.mk dumbpad refactor - adding support for various PCB revisions (#9259) 2021-03-04 20:25:19 -08:00

readme.md

dumbpad

dumbpad

dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder.

  • Single-encoder PCBs are reversible - components can be soldered to either side to allow the encoder to be on either the left or right side.
  • Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners

Support for dumbpad all PCB revisions can be found in this directory.

  • Maintainer: imchipwood
  • PCB repository: dumbpad on github
    • PCB revisions:
      • v0.x - these revisions have two LEDs for layer indication
        • 'v0x': Default setup for single rotary encoder v0.x PCBs
        • 'v0x_right': Same as v0x but with rotary encoder on right side (components on bottom of PCB)
        • 'v0x_dualencoder': Dual-encoder PCBs
      • v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication
        • 'v1x': Default setup for v1.x PCBs with a single rotary encoder on the left side
        • 'v1x_right': Same as v1x but with rotary encoder on right side (components on bottom of PCB)
        • 'v1x_dualencoder': v1x PCB with two rotary encoders