gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-29 22:45:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
2886c335a0
qmk_firmware/keyboards/mechwild/sugarglider
History
Joel Challis a0a6820c1b
Migrate some dip switch config to info.json (#22437)
2023-11-23 08:33:59 +11:00
..
f401
f411
keymaps Remove requirement for keymap_steno.h include in keymaps (#22423) 2023-11-12 18:25:46 +11:00
wide_oled
config.h Migrate some dip switch config to info.json (#22437) 2023-11-23 08:33:59 +11:00
glcdfont.c
halconf.h
info.json Migrate some dip switch config to info.json (#22437) 2023-11-23 08:33:59 +11:00
matrix.c
mcuconf.h
post_rules.mk
readme.md
rules.mk Dedupe I2C, SPI, UART driver inclusions (#22253) 2023-10-13 17:25:32 +11:00
sugarglider.c
sugarglider.h

readme.md

mechwild/sugarglider

mechwild/sugarglider

The Sugar Glider is an ergonomic keyboard with columnar stagger and a central touchpad, OLED, and status LEDs.

Make example for this keyboard (after setting up your build environment):

make mechwild/sugarglider:default

Flashing example for this keyboard:

make mechwild/sugarglider:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
  • Physical reset button: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. By default this is the top right key on layer 1.