mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-12 04:40:58 +00:00
.. | ||
keymaps | ||
board.h | ||
config.h | ||
halconf.h | ||
id75.c | ||
info.json | ||
mcuconf.h | ||
readme.md | ||
rules.mk |
Idobao x YMDK ID75
A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs.
- Keyboard Maintainer: The QMK Community
- Hardware Supported: Idobao x YMDK ID75 PCB (APM32F103CBT6)
- This PCB uses an ARM Cortex-M3 MCU with 128kb flash. It is not the same as
idobao/id75
orymdk/ymd75
.
- This PCB uses an ARM Cortex-M3 MCU with 128kb flash. It is not the same as
- Hardware Availability: YMDK, AliExpress (YMDK Store), Amazon
Make example for this keyboard (after setting up your build environment):
make ymdk/id75:default
Flashing example for this keyboard:
make ymdk/id75:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset button: Press the button on the back of the PCB twice in quick succession.
- Keycode in layout: Press the key mapped to
QK_BOOT
. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner.
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named MT.KEY
. If the CLI is unable to find this device, the compiled .uf2
file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.