mirror of https://github.com/qmk/qmk_firmware
107 lines
3.5 KiB
Plaintext
107 lines
3.5 KiB
Plaintext
/** \file
|
|
*
|
|
* This file contains special DoxyGen information for the generation of the main page and other special
|
|
* documentation pages. It is not a project source file.
|
|
*/
|
|
|
|
/** \mainpage Benito Arduino Programmer Project
|
|
*
|
|
* \section Sec_Compat Project Compatibility:
|
|
*
|
|
* The following list indicates what microcontrollers are compatible with this project.
|
|
*
|
|
* \li Series 7 USB AVRs (AT90USBxxx7)
|
|
* \li Series 6 USB AVRs (AT90USBxxx6)
|
|
* \li Series 4 USB AVRs (ATMEGAxxU4)
|
|
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
|
|
*
|
|
* \section Sec_Info USB Information:
|
|
*
|
|
* The following table gives a rundown of the USB utilization of this project.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <td><b>USB Mode:</b></td>
|
|
* <td>Device</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Class:</b></td>
|
|
* <td>Communications Device Class (CDC)</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>USB Subclass:</b></td>
|
|
* <td>Abstract Control Model (ACM)</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Relevant Standards:</b></td>
|
|
* <td>USBIF CDC Class Standard \n
|
|
* Arduino Bootloader Specification</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td><b>Supported USB Speeds:</b></td>
|
|
* <td>Full Speed Mode</td>
|
|
* </tr>
|
|
* </table>
|
|
*
|
|
* \section Sec_Description Project Description:
|
|
*
|
|
* Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This
|
|
* project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse
|
|
* to appear on a given port pin, to control the target's /RESET pin.
|
|
*
|
|
* This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs.
|
|
*
|
|
* After running this project for the first time on a new computer, you will need to supply the .INF file located
|
|
* in this project's directory as the device's driver when running under Windows. This will enable Windows to use
|
|
* its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should
|
|
* automatically use their own inbuilt CDC-ACM drivers.
|
|
*
|
|
* \section Sec_Options Project Options
|
|
*
|
|
* The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
|
|
*
|
|
* <table>
|
|
* <tr>
|
|
* <th><b>Define Name:</b></th>
|
|
* <th><b>Location:</b></th>
|
|
* <th><b>Description:</b></th>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>AVR_RESET_LINE_PORT</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>AVR_RESET_LINE_DDR</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>AVR_RESET_LINE_MASK</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>AVR_RESET_PULSE_MS</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Pulse length in milliseconds for the target /RESET pulse.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>TX_RX_LED_PULSE_MS</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>PING_PONG_LED_PULSE_MS</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
|
|
* </tr>
|
|
* <tr>
|
|
* <td>RECEIVE_BUFFER_FLUSH_MS</td>
|
|
* <td>AppConfig.h</td>
|
|
* <td>Period between flushings of received data buffer to the attached USB host.</td>
|
|
* </tr>
|
|
* </table>
|
|
*/
|
|
|