qmk_firmware/keyboards/barleycorn_smd/config.h

104 lines
3.1 KiB
C

/*
Copyright 2021 Matthew Dias
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 18
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
#define MATRIX_ROW_PINS { F5, F4, F1, F0, F6 }
#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, D5, D5, D5, D5, D5, D5, D5, D5, D5, D5 }
#define UNUSED_PINS
#define PORT_EXPANDER_ADDRESS 0x20
#define RGB_DI_PIN E6
#define RGBLED_NUM 15
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5 }
#define LED_CAPS_LOCK_PIN B2
#define LED_NUM_LOCK_PIN B3
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define USB_MAX_POWER_CONSUMPTION 400
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT