qmk_firmware/keyboards/rgbkb/zygomorph
Drashna Jaelre f6c7e11426 Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328)
* Remove the need to set NUM_OF_ENCODERS

Instead, calculate the size of the array, and use that instead

* Add hack for split common support

* Remove NUM_OF_ENCODERS from keyboard config

Can be reverted, if needed
2019-07-16 01:40:54 -07:00
..
common [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
keymaps [Keymap] Xulkal user changes (#6044) 2019-06-01 14:39:31 -07:00
rev1 Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328) 2019-07-16 01:40:54 -07:00
config.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
readme.md [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
rules.mk [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
zygomorph.c [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
zygomorph.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00

readme.md

Zygomorph

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.