mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-23 20:03:01 +00:00

History

Nick Brassel 154d35ac14 Remove `UNUSED_PINS` (#17931 )		2022-08-06 23:23:35 +10:00
..
chconf.h	Onekey cleanup (#13786 )	2021-07-30 18:10:05 +01:00
config.h	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
halconf.h	Onekey cleanup (#13786 )	2021-07-30 18:10:05 +01:00
mcuconf.h	Enable OLED support for Teensy 3.2/LC (#7591 )	2020-07-26 07:50:56 +10:00
readme.md	Update README.md for teensy lc onekey (#17797 )	2022-07-25 21:59:37 -07:00
rules.mk	Refactor `bootloader_jump()` implementations (#15450 )	2021-12-27 21:10:07 +11:00

readme.md

Teensy LC onekey

To trigger keypress, short together pins D5 and B2 (marked on the PCB as 20 and 19).

Hardware

Pins

When setting matrix pins, you need to use the MCU definitions instead of what is printed on the PCB. Sourced from https://www.pjrc.com/teensy/schematic_lc.gif. The following table can be used to convert between the two.

PCB	MCU	Notes
0	B16
1	B17
2	D0
3	A1
4	A2
5	D7
6	D4
7	D2
8	D3
9	C3
10	C4
11	C6
12	C7
13/LED	C5
14/A0	D1
15/A1	C0
16/A2	B0
17/A3	B1
18/A4	B3
19/A5	B2
20/A6	D5
21/A7	D6
22/A8	C1
23/A9	C2
24/A10	E20
25/A11	E21
26/A12	E30