qmk_firmware/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c
Victor Toni 6209122213
[Keymap] Add vitoni keymap for GMMK Pro (ISO) (#15006)
* [Keymap] Add vitoni layout for GMMK Pro (ISO)

Keymap has layered cursor keys similar to laptop keyboards.

* Configure RGB defaults for startup

* Configure encoder to change value/brightness on FN layer

* Remove FN layer and add dedicated RGB layer

* Make RGB layer sticky (using TG) to avoid holding FN while configuring RGB

* Add RGB indicators for active layers

* Add RGB indicator for active RESET mode

Signed-off-by: Victor Toni <victor.toni@gmail.com>

* Configure idle / USB suspend settings

* Add RGB fade in when resuming after suspend

* Add RGB fade out before suspend

* Add fade out before idle

* Add breathe effect when idle
2021-12-27 21:13:12 +11:00

149 lines
6.5 KiB
C

// Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>,
// Copyright 2021 Victor Toni (@vitoni)
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
#include "vitoni.h"
enum layer_names {
_BASE,
_MOV,
_RGB
};
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute)
// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del
// Tab Q W E R T Y U I O P [ ] PgUp
// Caps A S D F G H J K L ; " # Enter PgDn
// Sh_L / Z X C V B N M , . ? Sh_R Up End
// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right
//
// This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO).
// Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience.
// Press CAPS+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts.
[_BASE] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP,
MO(_MOV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, TG(_RGB),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_MOV] = LAYOUT(
RESET, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MSTP, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, _______,
_______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
),
[_RGB] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_SPI,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SPD,
_______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI
),
};
// clang-format on
#if defined(ENCODER_ENABLE)
bool encoder_update_user(uint8_t index, bool clockwise) {
switch (get_highest_layer(layer_state)) {
case _MOV:
if (clockwise) {
tap_code16(C(KC_TAB));
} else {
tap_code16(S(C(KC_TAB)));
}
break;
#if defined(RGB_MATRIX_ENABLE)
case _RGB:
if (clockwise) {
rgb_matrix_increase_val_noeeprom();
} else {
rgb_matrix_decrease_val_noeeprom();
}
break;
#endif // RGB_MATRIX_ENABLE
default:
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
break;
}
return true;
}
#endif // ENCODER_ENABLE
#if defined(RGB_MATRIX_ENABLE)
/*
* Set up default RGB color.
*/
void rgb_matrix_set_default_color(void) {
rgb_matrix_sethsv_noeeprom_user(HSV_CHARTREUSE);
}
/*
* Set up RGB defaults.
*/
void rgb_matrix_configure_default_settings(void) {
rgb_matrix_set_default_color();
}
void keyboard_post_init_user(void) {
rgb_matrix_enable_noeeprom();
rgb_matrix_configure_default_settings();
}
/*
* Use RGB underglow to indicate specific layers.
*/
layer_state_t layer_state_set_user(layer_state_t state) {
switch (get_highest_layer(state)) {
case _MOV:
rgb_matrix_sethsv_noeeprom_user(HSV_SPRINGGREEN);
break;
case _RGB:
rgb_matrix_sethsv_noeeprom_user(HSV_GREEN);
break;
default: // for any other layer
rgb_matrix_set_default_color();
break;
}
return state;
}
void matrix_scan_user(void) {
matrix_scan_user_rgb();
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (!process_record_user_rgb(keycode, record)) {
return false;
}
switch (keycode) {
case RESET: // when activating RESET mode for flashing
if (record->event.pressed) {
rgb_matrix_set_color_all(63, 0, 0);
rgb_matrix_driver.flush();
}
return true;
}
return true; // Process all other keycodes normally
}
#endif // RGB_MATRIX_ENABLE