qmk_firmware/keyboards/handwired/co60/rev7/config.h

74 lines
2.2 KiB
C

/*
Copyright 2019 John M Daly <jmdaly@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
#define MANUFACTURER John M Daly
#define PRODUCT CO60 rev7
#define DESCRIPTION An open hardware sixty percent PCB
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/* ROWS: Top to bottom, COLS: Left to right
*/
#define MATRIX_ROW_PINS { A8, A2, B13, B2, B10 }
#define MATRIX_COL_PINS { A10, A9, A3, A4, A5, A6, B0, B1, A15, B3, B4, B5, C13, C14, C15 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* Backlight configuration
* Backlight LEDs on B8
*/
#define BACKLIGHT_PIN B8
#define BACKLIGHT_BREATHING
/* RGB underglow configuration */
#define WS2812_SPI SPID1
#define WS2812_SPI_MOSI_PAL_MODE 5
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGB_DI_PIN A7
#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGB_MATRIX_KEYPRESSES