mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-18 15:43:23 +00:00
347 lines
12 KiB
PHP
347 lines
12 KiB
PHP
/* Name: usbdrvasm16.inc
|
|
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
|
* Author: Christian Starkjohann
|
|
* Creation Date: 2007-06-15
|
|
* Tabsize: 4
|
|
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
|
|
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
|
* Revision: $Id: usbdrvasm16.inc 760 2009-08-09 18:59:43Z cs $
|
|
*/
|
|
|
|
/* Do not link this file! Link usbdrvasm.S instead, which includes the
|
|
* appropriate implementation!
|
|
*/
|
|
|
|
/*
|
|
General Description:
|
|
This file is the 16 MHz version of the asssembler part of the USB driver. It
|
|
requires a 16 MHz crystal (not a ceramic resonator and not a calibrated RC
|
|
oscillator).
|
|
|
|
See usbdrv.h for a description of the entire driver.
|
|
|
|
Since almost all of this code is timing critical, don't change unless you
|
|
really know what you are doing! Many parts require not only a maximum number
|
|
of CPU cycles, but even an exact number of cycles!
|
|
*/
|
|
|
|
;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
|
|
;nominal frequency: 16 MHz -> 10.6666666 cycles per bit, 85.333333333 cycles per byte
|
|
; Numbers in brackets are clocks counted from center of last sync bit
|
|
; when instruction starts
|
|
|
|
USB_INTR_VECTOR:
|
|
;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt
|
|
push YL ;[-25] push only what is necessary to sync with edge ASAP
|
|
in YL, SREG ;[-23]
|
|
push YL ;[-22]
|
|
push YH ;[-20]
|
|
;----------------------------------------------------------------------------
|
|
; Synchronize with sync pattern:
|
|
;----------------------------------------------------------------------------
|
|
;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
|
|
;sync up with J to K edge during sync pattern -- use fastest possible loops
|
|
;The first part waits at most 1 bit long since we must be in sync pattern.
|
|
;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
|
|
;waitForJ, ensure that this prerequisite is met.
|
|
waitForJ:
|
|
inc YL
|
|
sbis USBIN, USBMINUS
|
|
brne waitForJ ; just make sure we have ANY timeout
|
|
waitForK:
|
|
;The following code results in a sampling window of < 1/4 bit which meets the spec.
|
|
sbis USBIN, USBMINUS ;[-15]
|
|
rjmp foundK ;[-14]
|
|
sbis USBIN, USBMINUS
|
|
rjmp foundK
|
|
sbis USBIN, USBMINUS
|
|
rjmp foundK
|
|
sbis USBIN, USBMINUS
|
|
rjmp foundK
|
|
sbis USBIN, USBMINUS
|
|
rjmp foundK
|
|
sbis USBIN, USBMINUS
|
|
rjmp foundK
|
|
#if USB_COUNT_SOF
|
|
lds YL, usbSofCount
|
|
inc YL
|
|
sts usbSofCount, YL
|
|
#endif /* USB_COUNT_SOF */
|
|
#ifdef USB_SOF_HOOK
|
|
USB_SOF_HOOK
|
|
#endif
|
|
rjmp sofError
|
|
foundK: ;[-12]
|
|
;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling]
|
|
;we have 1 bit time for setup purposes, then sample again. Numbers in brackets
|
|
;are cycles from center of first sync (double K) bit after the instruction
|
|
push bitcnt ;[-12]
|
|
; [---] ;[-11]
|
|
lds YL, usbInputBufOffset;[-10]
|
|
; [---] ;[-9]
|
|
clr YH ;[-8]
|
|
subi YL, lo8(-(usbRxBuf));[-7] [rx loop init]
|
|
sbci YH, hi8(-(usbRxBuf));[-6] [rx loop init]
|
|
push shift ;[-5]
|
|
; [---] ;[-4]
|
|
ldi bitcnt, 0x55 ;[-3] [rx loop init]
|
|
sbis USBIN, USBMINUS ;[-2] we want two bits K (sample 2 cycles too early)
|
|
rjmp haveTwoBitsK ;[-1]
|
|
pop shift ;[0] undo the push from before
|
|
pop bitcnt ;[2] undo the push from before
|
|
rjmp waitForK ;[4] this was not the end of sync, retry
|
|
; The entire loop from waitForK until rjmp waitForK above must not exceed two
|
|
; bit times (= 21 cycles).
|
|
|
|
;----------------------------------------------------------------------------
|
|
; push more registers and initialize values while we sample the first bits:
|
|
;----------------------------------------------------------------------------
|
|
haveTwoBitsK:
|
|
push x1 ;[1]
|
|
push x2 ;[3]
|
|
push x3 ;[5]
|
|
ldi shift, 0 ;[7]
|
|
ldi x3, 1<<4 ;[8] [rx loop init] first sample is inverse bit, compensate that
|
|
push x4 ;[9] == leap
|
|
|
|
in x1, USBIN ;[11] <-- sample bit 0
|
|
andi x1, USBMASK ;[12]
|
|
bst x1, USBMINUS ;[13]
|
|
bld shift, 7 ;[14]
|
|
push cnt ;[15]
|
|
ldi leap, 0 ;[17] [rx loop init]
|
|
ldi cnt, USB_BUFSIZE;[18] [rx loop init]
|
|
rjmp rxbit1 ;[19] arrives at [21]
|
|
|
|
;----------------------------------------------------------------------------
|
|
; Receiver loop (numbers in brackets are cycles within byte after instr)
|
|
;----------------------------------------------------------------------------
|
|
|
|
; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap"
|
|
; accordingly to approximate this value in the long run.
|
|
|
|
unstuff6:
|
|
andi x2, USBMASK ;[03]
|
|
ori x3, 1<<6 ;[04] will not be shifted any more
|
|
andi shift, ~0x80;[05]
|
|
mov x1, x2 ;[06] sampled bit 7 is actually re-sampled bit 6
|
|
subi leap, -1 ;[07] total duration = 11 bits -> subtract 1/3
|
|
rjmp didUnstuff6 ;[08]
|
|
|
|
unstuff7:
|
|
ori x3, 1<<7 ;[09] will not be shifted any more
|
|
in x2, USBIN ;[00] [10] re-sample bit 7
|
|
andi x2, USBMASK ;[01]
|
|
andi shift, ~0x80;[02]
|
|
subi leap, 2 ;[03] total duration = 10 bits -> add 1/3
|
|
rjmp didUnstuff7 ;[04]
|
|
|
|
unstuffEven:
|
|
ori x3, 1<<6 ;[09] will be shifted right 6 times for bit 0
|
|
in x1, USBIN ;[00] [10]
|
|
andi shift, ~0x80;[01]
|
|
andi x1, USBMASK ;[02]
|
|
breq se0 ;[03]
|
|
subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3
|
|
nop2 ;[05]
|
|
rjmp didUnstuffE ;[06]
|
|
|
|
unstuffOdd:
|
|
ori x3, 1<<5 ;[09] will be shifted right 4 times for bit 1
|
|
in x2, USBIN ;[00] [10]
|
|
andi shift, ~0x80;[01]
|
|
andi x2, USBMASK ;[02]
|
|
breq se0 ;[03]
|
|
subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3
|
|
nop2 ;[05]
|
|
rjmp didUnstuffO ;[06]
|
|
|
|
rxByteLoop:
|
|
andi x1, USBMASK ;[03]
|
|
eor x2, x1 ;[04]
|
|
subi leap, 1 ;[05]
|
|
brpl skipLeap ;[06]
|
|
subi leap, -3 ;1 one leap cycle every 3rd byte -> 85 + 1/3 cycles per byte
|
|
nop ;1
|
|
skipLeap:
|
|
subi x2, 1 ;[08]
|
|
ror shift ;[09]
|
|
didUnstuff6:
|
|
cpi shift, 0xfc ;[10]
|
|
in x2, USBIN ;[00] [11] <-- sample bit 7
|
|
brcc unstuff6 ;[01]
|
|
andi x2, USBMASK ;[02]
|
|
eor x1, x2 ;[03]
|
|
subi x1, 1 ;[04]
|
|
ror shift ;[05]
|
|
didUnstuff7:
|
|
cpi shift, 0xfc ;[06]
|
|
brcc unstuff7 ;[07]
|
|
eor x3, shift ;[08] reconstruct: x3 is 1 at bit locations we changed, 0 at others
|
|
st y+, x3 ;[09] store data
|
|
rxBitLoop:
|
|
in x1, USBIN ;[00] [11] <-- sample bit 0/2/4
|
|
andi x1, USBMASK ;[01]
|
|
eor x2, x1 ;[02]
|
|
andi x3, 0x3f ;[03] topmost two bits reserved for 6 and 7
|
|
subi x2, 1 ;[04]
|
|
ror shift ;[05]
|
|
cpi shift, 0xfc ;[06]
|
|
brcc unstuffEven ;[07]
|
|
didUnstuffE:
|
|
lsr x3 ;[08]
|
|
lsr x3 ;[09]
|
|
rxbit1:
|
|
in x2, USBIN ;[00] [10] <-- sample bit 1/3/5
|
|
andi x2, USBMASK ;[01]
|
|
breq se0 ;[02]
|
|
eor x1, x2 ;[03]
|
|
subi x1, 1 ;[04]
|
|
ror shift ;[05]
|
|
cpi shift, 0xfc ;[06]
|
|
brcc unstuffOdd ;[07]
|
|
didUnstuffO:
|
|
subi bitcnt, 0xab;[08] == addi 0x55, 0x55 = 0x100/3
|
|
brcs rxBitLoop ;[09]
|
|
|
|
subi cnt, 1 ;[10]
|
|
in x1, USBIN ;[00] [11] <-- sample bit 6
|
|
brcc rxByteLoop ;[01]
|
|
rjmp overflow
|
|
|
|
macro POP_STANDARD ; 14 cycles
|
|
pop cnt
|
|
pop x4
|
|
pop x3
|
|
pop x2
|
|
pop x1
|
|
pop shift
|
|
pop bitcnt
|
|
endm
|
|
macro POP_RETI ; 7 cycles
|
|
pop YH
|
|
pop YL
|
|
out SREG, YL
|
|
pop YL
|
|
endm
|
|
|
|
#include "asmcommon.inc"
|
|
|
|
; USB spec says:
|
|
; idle = J
|
|
; J = (D+ = 0), (D- = 1)
|
|
; K = (D+ = 1), (D- = 0)
|
|
; Spec allows 7.5 bit times from EOP to SOP for replies
|
|
|
|
bitstuffN:
|
|
eor x1, x4 ;[5]
|
|
ldi x2, 0 ;[6]
|
|
nop2 ;[7]
|
|
nop ;[9]
|
|
out USBOUT, x1 ;[10] <-- out
|
|
rjmp didStuffN ;[0]
|
|
|
|
bitstuff6:
|
|
eor x1, x4 ;[5]
|
|
ldi x2, 0 ;[6] Carry is zero due to brcc
|
|
rol shift ;[7] compensate for ror shift at branch destination
|
|
rjmp didStuff6 ;[8]
|
|
|
|
bitstuff7:
|
|
ldi x2, 0 ;[2] Carry is zero due to brcc
|
|
rjmp didStuff7 ;[3]
|
|
|
|
|
|
sendNakAndReti:
|
|
ldi x3, USBPID_NAK ;[-18]
|
|
rjmp sendX3AndReti ;[-17]
|
|
sendAckAndReti:
|
|
ldi cnt, USBPID_ACK ;[-17]
|
|
sendCntAndReti:
|
|
mov x3, cnt ;[-16]
|
|
sendX3AndReti:
|
|
ldi YL, 20 ;[-15] x3==r20 address is 20
|
|
ldi YH, 0 ;[-14]
|
|
ldi cnt, 2 ;[-13]
|
|
; rjmp usbSendAndReti fallthrough
|
|
|
|
;usbSend:
|
|
;pointer to data in 'Y'
|
|
;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
|
|
;uses: x1...x4, btcnt, shift, cnt, Y
|
|
;Numbers in brackets are time since first bit of sync pattern is sent
|
|
;We don't match the transfer rate exactly (don't insert leap cycles every third
|
|
;byte) because the spec demands only 1.5% precision anyway.
|
|
usbSendAndReti: ; 12 cycles until SOP
|
|
in x2, USBDDR ;[-12]
|
|
ori x2, USBMASK ;[-11]
|
|
sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
|
|
in x1, USBOUT ;[-8] port mirror for tx loop
|
|
out USBDDR, x2 ;[-7] <- acquire bus
|
|
; need not init x2 (bitstuff history) because sync starts with 0
|
|
ldi x4, USBMASK ;[-6] exor mask
|
|
ldi shift, 0x80 ;[-5] sync byte is first byte sent
|
|
txByteLoop:
|
|
ldi bitcnt, 0x35 ;[-4] [6] binary 0011 0101
|
|
txBitLoop:
|
|
sbrs shift, 0 ;[-3] [7]
|
|
eor x1, x4 ;[-2] [8]
|
|
out USBOUT, x1 ;[-1] [9] <-- out N
|
|
ror shift ;[0] [10]
|
|
ror x2 ;[1]
|
|
didStuffN:
|
|
cpi x2, 0xfc ;[2]
|
|
brcc bitstuffN ;[3]
|
|
lsr bitcnt ;[4]
|
|
brcc txBitLoop ;[5]
|
|
brne txBitLoop ;[6]
|
|
|
|
sbrs shift, 0 ;[7]
|
|
eor x1, x4 ;[8]
|
|
didStuff6:
|
|
out USBOUT, x1 ;[-1] [9] <-- out 6
|
|
ror shift ;[0] [10]
|
|
ror x2 ;[1]
|
|
cpi x2, 0xfc ;[2]
|
|
brcc bitstuff6 ;[3]
|
|
ror shift ;[4]
|
|
didStuff7:
|
|
ror x2 ;[5]
|
|
sbrs x2, 7 ;[6]
|
|
eor x1, x4 ;[7]
|
|
nop ;[8]
|
|
cpi x2, 0xfc ;[9]
|
|
out USBOUT, x1 ;[-1][10] <-- out 7
|
|
brcc bitstuff7 ;[0] [11]
|
|
ld shift, y+ ;[1]
|
|
dec cnt ;[3]
|
|
brne txByteLoop ;[4]
|
|
;make SE0:
|
|
cbr x1, USBMASK ;[5] prepare SE0 [spec says EOP may be 21 to 25 cycles]
|
|
lds x2, usbNewDeviceAddr;[6]
|
|
lsl x2 ;[8] we compare with left shifted address
|
|
subi YL, 20 + 2 ;[9] Only assign address on data packets, not ACK/NAK in x3
|
|
sbci YH, 0 ;[10]
|
|
out USBOUT, x1 ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle
|
|
;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
|
|
;set address only after data packet was sent, not after handshake
|
|
breq skipAddrAssign ;[0]
|
|
sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer
|
|
skipAddrAssign:
|
|
;end of usbDeviceAddress transfer
|
|
ldi x2, 1<<USB_INTR_PENDING_BIT;[2] int0 occurred during TX -- clear pending flag
|
|
USB_STORE_PENDING(x2) ;[3]
|
|
ori x1, USBIDLE ;[4]
|
|
in x2, USBDDR ;[5]
|
|
cbr x2, USBMASK ;[6] set both pins to input
|
|
mov x3, x1 ;[7]
|
|
cbr x3, USBMASK ;[8] configure no pullup on both pins
|
|
ldi x4, 4 ;[9]
|
|
se0Delay:
|
|
dec x4 ;[10] [13] [16] [19]
|
|
brne se0Delay ;[11] [14] [17] [20]
|
|
out USBOUT, x1 ;[21] <-- out J (idle) -- end of SE0 (EOP signal)
|
|
out USBDDR, x2 ;[22] <-- release bus now
|
|
out USBOUT, x3 ;[23] <-- ensure no pull-up resistors are active
|
|
rjmp doReturn
|