mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-13 05:11:01 +00:00
1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
101 lines
5.9 KiB
C
101 lines
5.9 KiB
C
// Copyright 2021 Nick Brassel (@tzarc)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter ILI9xxx command opcodes
|
|
#define ILI9XXX_CMD_NOP 0x00 // No operation
|
|
#define ILI9XXX_CMD_RESET 0x01 // Software reset
|
|
#define ILI9XXX_GET_ID_INFO 0x04 // Get ID information
|
|
#define ILI9XXX_GET_STATUS 0x09 // Get status
|
|
#define ILI9XXX_GET_PWR_MODE 0x0A // Get power mode
|
|
#define ILI9XXX_GET_MADCTL 0x0B // Get MADCTL
|
|
#define ILI9XXX_GET_PIX_FMT 0x0C // Get pixel format
|
|
#define ILI9XXX_GET_IMG_FMT 0x0D // Get image format
|
|
#define ILI9XXX_GET_SIG_MODE 0x0E // Get signal mode
|
|
#define ILI9XXX_GET_SELF_DIAG 0x0F // Get self-diagnostics
|
|
#define ILI9XXX_CMD_SLEEP_ON 0x10 // Enter sleep mode
|
|
#define ILI9XXX_CMD_SLEEP_OFF 0x11 // Exist sleep mode
|
|
#define ILI9XXX_CMD_PARTIAL_ON 0x12 // Enter partial mode
|
|
#define ILI9XXX_CMD_PARTIAL_OFF 0x13 // Exit partial mode
|
|
#define ILI9XXX_CMD_INVERT_ON 0x20 // Enter inverted mode
|
|
#define ILI9XXX_CMD_INVERT_OFF 0x21 // Exit inverted mode
|
|
#define ILI9XXX_SET_GAMMA 0x26 // Set gamma params
|
|
#define ILI9XXX_CMD_DISPLAY_OFF 0x28 // Disable display
|
|
#define ILI9XXX_CMD_DISPLAY_ON 0x29 // Enable display
|
|
#define ILI9XXX_SET_COL_ADDR 0x2A // Set column address
|
|
#define ILI9XXX_SET_PAGE_ADDR 0x2B // Set page address
|
|
#define ILI9XXX_SET_MEM 0x2C // Set memory
|
|
#define ILI9XXX_SET_COLOR 0x2D // Set color
|
|
#define ILI9XXX_GET_MEM 0x2E // Get memory
|
|
#define ILI9XXX_SET_PARTIAL_AREA 0x30 // Set partial area
|
|
#define ILI9XXX_SET_VSCROLL 0x33 // Set vertical scroll def
|
|
#define ILI9XXX_CMD_TEARING_ON 0x34 // Tearing line enabled
|
|
#define ILI9XXX_CMD_TEARING_OFF 0x35 // Tearing line disabled
|
|
#define ILI9XXX_SET_MEM_ACS_CTL 0x36 // Set mem access ctl
|
|
#define ILI9XXX_SET_VSCROLL_ADDR 0x37 // Set vscroll start addr
|
|
#define ILI9XXX_CMD_IDLE_OFF 0x38 // Exit idle mode
|
|
#define ILI9XXX_CMD_IDLE_ON 0x39 // Enter idle mode
|
|
#define ILI9XXX_SET_PIX_FMT 0x3A // Set pixel format
|
|
#define ILI9XXX_SET_MEM_CONT 0x3C // Set memory continue
|
|
#define ILI9XXX_GET_MEM_CONT 0x3E // Get memory continue
|
|
#define ILI9XXX_SET_TEAR_SCANLINE 0x44 // Set tearing scanline
|
|
#define ILI9XXX_GET_TEAR_SCANLINE 0x45 // Get tearing scanline
|
|
#define ILI9XXX_SET_BRIGHTNESS 0x51 // Set brightness
|
|
#define ILI9XXX_GET_BRIGHTNESS 0x52 // Get brightness
|
|
#define ILI9XXX_SET_DISPLAY_CTL 0x53 // Set display ctl
|
|
#define ILI9XXX_GET_DISPLAY_CTL 0x54 // Get display ctl
|
|
#define ILI9XXX_SET_CABC 0x55 // Set CABC
|
|
#define ILI9XXX_GET_CABC 0x56 // Get CABC
|
|
#define ILI9XXX_SET_CABC_MIN 0x5E // Set CABC min
|
|
#define ILI9XXX_GET_CABC_MIN 0x5F // Set CABC max
|
|
#define ILI9XXX_GET_ID1 0xDA // Get ID1
|
|
#define ILI9XXX_GET_ID2 0xDB // Get ID2
|
|
#define ILI9XXX_GET_ID3 0xDC // Get ID3
|
|
#define ILI9XXX_SET_RGB_IF_SIG_CTL 0xB0 // RGB IF signal ctl
|
|
#define ILI9XXX_SET_FRAME_CTL_NORMAL 0xB1 // Set frame ctl (normal)
|
|
#define ILI9XXX_SET_FRAME_CTL_IDLE 0xB2 // Set frame ctl (idle)
|
|
#define ILI9XXX_SET_FRAME_CTL_PARTIAL 0xB3 // Set frame ctl (partial)
|
|
#define ILI9XXX_SET_INVERSION_CTL 0xB4 // Set inversion ctl
|
|
#define ILI9XXX_SET_BLANKING_PORCH_CTL 0xB5 // Set blanking porch ctl
|
|
#define ILI9XXX_SET_FUNCTION_CTL 0xB6 // Set function ctl
|
|
#define ILI9XXX_SET_ENTRY_MODE 0xB7 // Set entry mode
|
|
#define ILI9XXX_SET_LIGHT_CTL_1 0xB8 // Set backlight ctl 1
|
|
#define ILI9XXX_SET_LIGHT_CTL_2 0xB9 // Set backlight ctl 2
|
|
#define ILI9XXX_SET_LIGHT_CTL_3 0xBA // Set backlight ctl 3
|
|
#define ILI9XXX_SET_LIGHT_CTL_4 0xBB // Set backlight ctl 4
|
|
#define ILI9XXX_SET_LIGHT_CTL_5 0xBC // Set backlight ctl 5
|
|
#define ILI9XXX_SET_LIGHT_CTL_7 0xBE // Set backlight ctl 7
|
|
#define ILI9XXX_SET_LIGHT_CTL_8 0xBF // Set backlight ctl 8
|
|
#define ILI9XXX_SET_POWER_CTL_1 0xC0 // Set power ctl 1
|
|
#define ILI9XXX_SET_POWER_CTL_2 0xC1 // Set power ctl 2
|
|
#define ILI9XXX_SET_VCOM_CTL_1 0xC5 // Set VCOM ctl 1
|
|
#define ILI9XXX_SET_VCOM_CTL_2 0xC7 // Set VCOM ctl 2
|
|
#define ILI9XXX_POWER_CTL_A 0xCB // Set power control A
|
|
#define ILI9XXX_POWER_CTL_B 0xCF // Set power control B
|
|
#define ILI9XXX_DRV_TIMING_CTL_A 0xE8 // Set driver timing control A
|
|
#define ILI9XXX_DRV_TIMING_CTL_B 0xEA // Set driver timing control B
|
|
#define ILI9XXX_POWER_ON_SEQ_CTL 0xED // Set Power on sequence control
|
|
#define ILI9XXX_SET_NVMEM 0xD0 // Set NVMEM data
|
|
#define ILI9XXX_GET_NVMEM_KEY 0xD1 // Get NVMEM protect key
|
|
#define ILI9XXX_GET_NVMEM_STATUS 0xD2 // Get NVMEM status
|
|
#define ILI9XXX_GET_ID4 0xD3 // Get ID4
|
|
#define ILI9XXX_SET_PGAMMA 0xE0 // Set positive gamma
|
|
#define ILI9XXX_SET_NGAMMA 0xE1 // Set negative gamma
|
|
#define ILI9XXX_SET_DGAMMA_CTL_1 0xE2 // Set digital gamma ctl 1
|
|
#define ILI9XXX_SET_DGAMMA_CTL_2 0xE3 // Set digital gamma ctl 2
|
|
#define ILI9XXX_ENABLE_3_GAMMA 0xF2 // Enable 3 gamma
|
|
#define ILI9XXX_SET_IF_CTL 0xF6 // Set interface control
|
|
#define ILI9XXX_SET_PUMP_RATIO_CTL 0xF7 // Set pump ratio control
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// MADCTL Flags
|
|
#define ILI9XXX_MADCTL_MY 0b10000000
|
|
#define ILI9XXX_MADCTL_MX 0b01000000
|
|
#define ILI9XXX_MADCTL_MV 0b00100000
|
|
#define ILI9XXX_MADCTL_ML 0b00010000
|
|
#define ILI9XXX_MADCTL_RGB 0b00000000
|
|
#define ILI9XXX_MADCTL_BGR 0b00001000
|
|
#define ILI9XXX_MADCTL_MH 0b00000100
|