qmk_firmware/keyboards/takashicompany/center_enter
2023-03-23 21:38:01 +11:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
center_enter.h [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
config.h Remove RGB_DI_PIN ifdefs (#20218) 2023-03-23 21:38:01 +11:00
info.json Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Center x Enter

image

A 30% keyboard with the enter key placed in the center. Option to install a rotary encoder is also available. VIA (Remap) is also supported.

Make example for this keyboard (after setting up your build environment):

make takashicompany/center_enter:default

Flashing example for this keyboard:

make takashicompany/center_enter:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available