gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-29 14:40:38 +00:00
Code Issues Packages Projects Releases Wiki Activity
0ee48d287a
qmk_firmware/keyboards/mode/m80v2
History
Patrick Muldoon 9aaf1c26f0
Swap LED_PIN_ON_STATE to 0. (#19692) 
User reported that CAPS lock Led state was inverted after soldering a LED to their board.

LED_PIN_ON_STATE defaults to 1, so just swap to low.

Flashed board and now CAPS LED reflects the actual state
2023-01-27 16:35:26 +00:00
..
m80v2h Refactor some layouts which contain keyboard name (#19643) 2023-01-20 02:36:30 +00:00
m80v2s Move keyboard USB IDs and strings to data driven, pass 2: M-O (#18090) 2022-08-20 01:45:28 +01:00
chconf.h
config.h Swap LED_PIN_ON_STATE to 0. (#19692) 2023-01-27 16:35:26 +00:00
halconf.h
m80v2.c
m80v2.h
mcuconf.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

Mode Eighty V2 PCB QMK firmware

MODE80
Image Gallery

The Mode80 is a tenkeyless high-end keyboard sold by Mode Designs.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F072 controller
  • Hardware Availability: you can get a Mode Eighty as of today (dec. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

After accessing the DFU state in your PCB, build the default layout using:

make mode/m80v2/m80v2h:default # Hotswap
make mode/m80v2/m80v2s:default # Soldered

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

Compile and flash

After accessing the DFU state in your PCB, you can compile-and-flash automatically usind dfu-util through

make mode/m80v2/m80v2h:default:flash # Hotswap
make mode/m80v2/m80v2s:default:flash # Soldered

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.