mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-02 16:05:09 +00:00
78 lines
1.9 KiB
C
78 lines
1.9 KiB
C
// Copyright 2024 Stefan Kerkmann (@KarlK90)
|
|
// Copyright 2021 QMK
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "uart.h"
|
|
|
|
#if defined(MCU_RP)
|
|
// 38400 baud, 8 data bits, 1 stop bit, no parity, no flow control
|
|
static SIOConfig sioConfig = {
|
|
.baud = SIO_DEFAULT_BITRATE,
|
|
.UARTLCR_H = (UART_UARTLCR_H_WLEN_8BITS | UART_UARTLCR_H_FEN),
|
|
.UARTCR = 0U,
|
|
.UARTIFLS = (UART_UARTIFLS_RXIFLSEL_1_8F | UART_UARTIFLS_TXIFLSEL_1_8E),
|
|
.UARTDMACR = 0U,
|
|
};
|
|
#else
|
|
static SIOConfig sioConfig = {
|
|
.baud = SIO_DEFAULT_BITRATE,
|
|
# if defined(MCU_STM32) && defined(USE_USARTV3)
|
|
.presc = USART_PRESC1,
|
|
# endif
|
|
.cr1 = UART_CR1,
|
|
.cr2 = UART_CR2,
|
|
.cr3 = UART_CR3,
|
|
};
|
|
#endif
|
|
|
|
void uart_init(uint32_t baud) {
|
|
static bool is_initialised = false;
|
|
|
|
if (is_initialised) {
|
|
return;
|
|
}
|
|
is_initialised = true;
|
|
|
|
sioConfig.baud = baud;
|
|
|
|
#if defined(USE_GPIOV1)
|
|
palSetLineMode(UART_TX_PIN, UART_TX_PAL_MODE);
|
|
palSetLineMode(UART_RX_PIN, UART_RX_PAL_MODE);
|
|
#else
|
|
palSetLineMode(UART_TX_PIN, PAL_MODE_ALTERNATE(UART_TX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
|
|
palSetLineMode(UART_RX_PIN, PAL_MODE_ALTERNATE(UART_RX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
|
|
#endif
|
|
|
|
sioStart(&UART_DRIVER, &sioConfig);
|
|
}
|
|
|
|
void uart_write(uint8_t data) {
|
|
chnPutTimeout(&UART_DRIVER, data, TIME_INFINITE);
|
|
}
|
|
|
|
uint8_t uart_read(void) {
|
|
msg_t result = chnGetTimeout(&UART_DRIVER, TIME_INFINITE);
|
|
|
|
if (sioHasRXErrorsX(&UART_DRIVER)) {
|
|
sioGetAndClearErrors(&UART_DRIVER);
|
|
}
|
|
|
|
return (uint8_t)result;
|
|
}
|
|
|
|
void uart_transmit(const uint8_t *data, uint16_t length) {
|
|
chnWrite(&UART_DRIVER, data, length);
|
|
}
|
|
|
|
void uart_receive(uint8_t *data, uint16_t length) {
|
|
chnRead(&UART_DRIVER, data, length);
|
|
|
|
if (sioHasRXErrorsX(&UART_DRIVER)) {
|
|
sioGetAndClearErrors(&UART_DRIVER);
|
|
}
|
|
}
|
|
|
|
bool uart_available() {
|
|
return !sioIsRXEmptyX(&UART_DRIVER);
|
|
}
|