qmk_firmware/keyboards/westm/westm68
Ryan e933e0411f
Move matrix config to info.json, part 5 (#20003)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-11 05:41:58 +11:00
..
keymaps Remove legacy keycodes, part 4 (#18683) 2022-10-13 18:28:14 +01:00
rev1 Migrate some more layouts to data driven (#19889) 2023-02-23 09:32:18 +11:00
rev2 Migrate some more layouts to data driven (#19889) 2023-02-23 09:32:18 +11:00
chconf.h
config.h Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
halconf.h [Keyboard westm68 rev1 and fine tune westm boards (#16528) 2022-03-14 20:55:33 -07:00
info.json Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
mcuconf.h
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
westm68.c [Keyboard westm68 rev1 and fine tune westm boards (#16528) 2022-03-14 20:55:33 -07:00
westm68.h

WestM

westm68

A 65% PCB with arrow cluster

Bootloader

  • Physical reset button: Briefly press the button on the back of the PCB.

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.

  • Keyboard Maintainer: WestM

  • Hardware Supported: WestM65

Make example for this keyboard (after setting up your build environment):

make westm/westm68:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.