mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-20 22:52:02 +00:00
Orient side LEDs on GMMK2 65% to match the rest of the matrix On GMMK2 P65 ANSI, the side LEDs were mapped to the wrong sides of the keyboard resulting in effects not being consistent with the key surface. This was most jarring in effects like pinwheel where the pattern involves the side LEDs and there is a distinctly different flow on the left and right halves of the board. This PR swaps the side LEDs in the map so that they are correctly oriented. Applied to both ANSI and ISO variants. |
||
---|---|---|
.. | ||
keymaps/default | ||
iso.c | ||
keyboard.json | ||
readme.md |
GMMK V2 65% (ISO)
A keyboard made and sold by Glorious LLC. Equipped with the WestBerry G7 ARM Cortex-M4 microcontroller
- Keyboard Maintainer: GloriousThrall
- Hardware Supported: GMMK V2
- Hardware Availability: GloriousPCGaming.com
Make example for this keyboard (after setting up your build environment):
make gmmk/gmmk2/p65/iso:default
Flashing example for this keyboard:
make gmmk/gmmk2/p65/iso:default:flash
To reset the board into bootloader mode, do one of the following:
- Hold the Reset switch mounted on the surface of the PCB while connecting the USB cable (remove the spacebar key and press and hold the pin on the right side)
- Hold the Escape key while connecting the USB cable (also erases persistent settings)
- Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.