gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2025-07-19 14:12:01 +00:00
Code Issues Packages Projects Releases Wiki Activity
deprecate_default_folder
qmk_firmware/keyboards/keychron/c1_pro_v2
History
Joel Challis 0bd02952ea
Remove "command":false from keyboards (#25193)
2025-04-24 10:28:13 +10:00
..
ansi Add Keychron C1 Pro V2 (#24899) 2025-03-01 17:48:59 -07:00
board.h Only configure STM32_HSECLK within board.h (#25001) 2025-03-09 23:41:24 +00:00
c1_pro_v2.c Add Keychron C1 Pro V2 (#24899) 2025-03-01 17:48:59 -07:00
config.h keychron/c*_pro_v2: Migrate DIP_SWITCH_PINS (#24978) 2025-03-06 23:17:21 +00:00
halconf.h Add Keychron C1 Pro V2 (#24899) 2025-03-01 17:48:59 -07:00
info.json Remove "command":false from keyboards (#25193) 2025-04-24 10:28:13 +10:00
mcuconf.h Only configure STM32_HSECLK within board.h (#25001) 2025-03-09 23:41:24 +00:00
readme.md Add Keychron C1 Pro V2 (#24899) 2025-03-01 17:48:59 -07:00

readme.md

Keychron C1 Pro V2

Keychron C1 Pro

A customizable 80% TKL keyboard.

v1 is based on STM32L432 and v2 is based on STM32F402.

  • Keyboard Maintainer: Keychron
  • Hardware Supported: Keychron C1 Pro
  • Hardware Availability: Keychron

Make example for this keyboard (after setting up your build environment):

make keychron/c1_pro_v2/ansi/rgb:default
make keychron/c1_pro_v2/ansi/white:default
make keychron/c1_pro_v2/ansi/non_light:default

Flashing example for this keyboard:

make keychron/c1_pro_v2/ansi/rgb:default:flash
make keychron/c1_pro_v2/ansi/white:default:flash
make keychron/c1_pro_v2/ansi/non_light:default:flash

bootloader

Enter the bootloader in two ways:

  • Bootmagic reset: Hold down the key located at K00, commonly programmed as Esc while plugging in the keyboard.
  • Physical reset button: Briefly press the RESET button under the spacebar.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.