/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet) * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * \li Series 6 USB AVRs (AT90USBxxx6) * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) * \li Series B XMEGA AVRs (ATXMEGAxxxBx) * \li Series C XMEGA AVRs (ATXMEGAxxxCx) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Device</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * Remote Network Driver Interface demonstration application. * This gives a simple reference application for implementing * a CDC RNDIS device acting as a simple network interface for * ethernet packet exchange. RNDIS is a proprietary Microsoft * standard; this demo will only work on Windows 2000 (manually * patched with the Microsoft RNDIS hotfix) and above (with no * manual patches), or on the latest Linux kernels. * * Before running, you will need to install the INF file that * is located in the RNDISEthernet project directory. This will * enable Windows to use its inbuilt RNDIS drivers, negating the * need for special Windows drivers for the device. To install, * right-click the .INF file and choose the Install option. If * Windows 2000 is used, the Microsoft INF file in the hotfix * will need to be altered to use the VID/PID of the demo and * then chosen instead of the LUFA RNDIS INF file when prompted. * * When enumerated, this demo will install as a new network * adapter which ethernet packets can be sent to and received * from. Running on top of the adapter is a very simple TCP/IP * stack with a HTTP webserver and TELNET host which can be * accessed through a web browser at IP address 10.0.0.2:80 or * through a TELNET client at 10.0.0.2:25. This device also supports * ping echos via the ICMP protocol. * * \note The TCP/IP stack in this demo has a number of limitations * and should serve as an example only - it is not fully featured nor * compliant to the TCP/IP specification. For complete projects, it is * recommended that it be replaced with an external open source TCP/IP * stack that is feature complete, such as the uIP stack. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <th><b>Define Name:</b></th> * <th><b>Location:</b></th> * <th><b>Description:</b></th> * </tr> * <tr> * <td>CLIENT_IP_ADDRESS</td> * <td>AppConfig.h</td> * <td>Configures the IP address given to the client (PC) via the DHCP server.</td> * </tr> * <tr> * <td>SERVER_IP_ADDRESS</td> * <td>AppConfig.h</td> * <td>Configures the IP address of the virtual server.</td> * </tr> * <tr> * <td>ADAPTER_MAC_ADDRESS</td> * <td>AppConfig.h</td> * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td> * </tr> * <tr> * <td>SERVER_MAC_ADDRESS</td> * <td>AppConfig.h</td> * <td>Configures the MAC address of the virtual server on the network.</td> * </tr> * <tr> * <td>NO_DECODE_ETHERNET</td> * <td>AppConfig.h</td> * <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_ARP</td> * <td>AppConfig.h</td> * <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_IP</td> * <td>AppConfig.h</td> * <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_ICMP</td> * <td>AppConfig.h</td> * <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_TCP</td> * <td>AppConfig.h</td> * <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_UDP</td> * <td>AppConfig.h</td> * <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td> * </tr> * <tr> * <td>NO_DECODE_DHCP</td> * <td>AppConfig.h</td> * <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td> * </tr> * </table> */