/* * Copyright 2018 Jack Humbert <jack.humb@gmail.com> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef REV3_CONFIG_H #define REV3_CONFIG_H /* USB Device descriptor parameter */ #define DEVICE_VER 0x0003 #undef MATRIX_ROWS #undef MATRIX_COLS /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #undef MATRIX_ROW_PINS #undef MATRIX_COL_PINS #define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 } #define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 } #define UNUSED_PINS #define NUMBER_OF_ENCODERS 1 #define ENCODERS_PAD_A { B13 } #define ENCODERS_PAD_B { B14 } //Audio #undef AUDIO_VOICES #undef C6_AUDIO #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(PLANCK_SOUND) // #define STARTUP_SONG SONG(NO_SOUND) #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ SONG(COLEMAK_SOUND), \ SONG(DVORAK_SOUND) \ } #define AUDIO_CLICKY /* to enable clicky on startup */ //#define AUDIO_CLICKY_ON #define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f #endif //configure qwiic micro_oled driver for the 128x32 oled #ifdef QWIIC_MICRO_OLED_ENABLE #undef I2C_ADDRESS_SA0_1 #define I2C_ADDRESS_SA0_1 0b0111100 #define LCDWIDTH 128 #define LCDHEIGHT 32 #define micro_oled_rotate_180 #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 6 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION /* * MIDI options */ /* Prevent use of disabled MIDI features in the keymap */ //#define MIDI_ENABLE_STRICT 1 /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ #define MIDI_BASIC /* enable advanced MIDI features: - MIDI notes can be added to the keymap - Octave shift and transpose - Virtual sustain, portamento, and modulation wheel - etc. */ //#define MIDI_ADVANCED /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 /* Haptic Driver initialization settings * Feedback Control Settings */ #define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ /* default 3V ERM vibration motor voltage and library*/ #if FB_ERM_LRA == 0 #define RATED_VOLTAGE 3 #define V_RMS 2.3 #define V_PEAK 3.30 /* Library Selection */ #define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ /* default 2V LRA voltage and library */ #elif FB_ERM_LRA == 1 #define RATED_VOLTAGE 2 #define V_RMS 2.0 #define V_PEAK 2.85 #define F_LRA 200 /* Library Selection */ #define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ #endif /* Control 1 register settings */ #define DRIVE_TIME 25 #define AC_COUPLE 0 #define STARTUP_BOOST 1 /* Control 2 Settings */ #define BIDIR_INPUT 1 #define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ #define SAMPLE_TIME 3 #define BLANKING_TIME 1 #define IDISS_TIME 1 /* Control 3 settings */ #define NG_THRESH 2 #define ERM_OPEN_LOOP 1 #define SUPPLY_COMP_DIS 0 #define DATA_FORMAT_RTO 0 #define LRA_DRIVE_MODE 0 #define N_PWM_ANALOG 0 #define LRA_OPEN_LOOP 0 /* Control 4 settings */ #define ZC_DET_TIME 0 #define AUTO_CAL_TIME 3 #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 10 #define RGB_DI_PIN B5 #define DRIVER_LED_TOTAL RGBLED_NUM // #define RGB_MATRIX_KEYPRESSES #define SOLENOID_PIN A14 #endif