/* Copyright 2020 Moritz Plattner This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x6562 // "eb" #define PRODUCT_ID 0x1337 #define DEVICE_VER 0x0001 #define MANUFACTURER ebastler #define PRODUCT isometria 75 /* key matrix size */ #define MATRIX_ROWS 6 #define MATRIX_COLS 16 #define MATRIX_ROW_PINS { A15, B4, B5, B6, B7, B8} #define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10, A13, A14, B9, C13, F0, F1, A0, B2, B10, B11 } #define UNUSED_PINS /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 /* Backlight */ #define BACKLIGHT_PIN A9 #define BACKLIGHT_BREATHING #define BACKLIGHT_PWM_DRIVER PWMD1 #define BACKLIGHT_PWM_CHANNEL 2 #define BACKLIGHT_PAL_MODE 2 #define BACKLIGHT_LEVELS 5 #define BACKLIGHT_ON_STATE 1 #define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it. /* Underglow */ #define RGB_DI_PIN B3 #define RGBLED_NUM 17 #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 #define WS2812_PWM_PAL_MODE 2 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 #define WS2812_DMA_CHANNEL 2 #define RGBLIGHT_SLEEP #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL /* Rotary encoder - set the resolution fitting your encoder. Most will need a value of 4. If 1 encoder click results in 2 keycodes sent increase the value. If you need 2 clicks for 1 keycode, decrease*/ #define ENCODER_RESOLUTION 2 #define ENCODERS_PAD_A { C15 } #define ENCODERS_PAD_B { C14 } #define TAP_CODE_DELAY 10 /* ADC - will be used for battery monitoring once BT support is added */ /* #define ADC_PIN B0 */