# project specific files SRC = matrix.c \ led.c ## chip/board settings # - the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F1xx # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ # - NOTE: a custom ld script is needed for EEPROM on Teensy LC MCU_LDSCRIPT = jm60_bootloader # Startup code to use # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ MCU_STARTUP = stm32f1xx # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards BOARD = JM60_BOARD # Cortex version # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 MCU = cortex-m3 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 # I.e. 6 for Teensy LC; 7 for Teensy 3.x ARMV = 7 # Vector table for application # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB #OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 OPT_DEFS = # Build Options # comment out to disable the options. # BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = no VISUALIZER_ENABLE = no #LED_DRIVER = is31fl3731c #LED_WIDTH = 16 #LED_HEIGHT = 5