/* Copyright 2012 Jun Wako Copyright 2013 Oleg Kostyuk Copyright 2015 ZSA Technology Labs Inc (@zsa) Copyright 2020 Christopher Courtney (@drashna) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "ergodox_ez.h" extern inline void ergodox_board_led_on(void); extern inline void ergodox_right_led_1_on(void); extern inline void ergodox_right_led_2_on(void); extern inline void ergodox_right_led_3_on(void); extern inline void ergodox_board_led_off(void); extern inline void ergodox_right_led_1_off(void); extern inline void ergodox_right_led_2_off(void); extern inline void ergodox_right_led_3_off(void); extern inline void ergodox_led_all_on(void); extern inline void ergodox_led_all_off(void); extern inline void ergodox_right_led_1_set(uint8_t n); extern inline void ergodox_right_led_2_set(uint8_t n); extern inline void ergodox_right_led_3_set(uint8_t n); extern inline void ergodox_right_led_set(uint8_t led, uint8_t n); extern inline void ergodox_led_all_set(uint8_t n); keyboard_config_t keyboard_config; bool i2c_initialized = 0; i2c_status_t mcp23018_status = 0x20; void matrix_init_kb(void) { // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") TCCR1A = 0b10101001; // set and configure fast PWM TCCR1B = 0b00001001; // set and configure fast PWM // (tied to Vcc for hardware convenience) gpio_set_pin_input(B4); // set B(4) as input, internal pull-up disabled // unused pins - C7, D4, D5, E6 // set as input with internal pull-up enabled gpio_set_pin_input_high(C7); gpio_set_pin_input_high(D4); gpio_set_pin_input_high(D5); gpio_set_pin_input_high(E6); keyboard_config.raw = eeconfig_read_kb(); ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4); #ifdef RGB_MATRIX_ENABLE if (keyboard_config.rgb_matrix_enable) { rgb_matrix_set_flags(LED_FLAG_ALL); } else { rgb_matrix_set_flags(LED_FLAG_NONE); } #endif ergodox_blink_all_leds(); matrix_init_user(); } void ergodox_blink_all_leds(void) { ergodox_led_all_off(); ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT); ergodox_right_led_1_on(); _delay_ms(50); ergodox_right_led_2_on(); _delay_ms(50); ergodox_right_led_3_on(); _delay_ms(50); #ifdef LEFT_LEDS ergodox_left_led_1_on(); _delay_ms(50); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } ergodox_left_led_2_on(); _delay_ms(50); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } ergodox_left_led_3_on(); _delay_ms(50); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } #endif ergodox_right_led_1_off(); _delay_ms(50); ergodox_right_led_2_off(); _delay_ms(50); ergodox_right_led_3_off(); #ifdef LEFT_LEDS _delay_ms(50); ergodox_left_led_1_off(); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } _delay_ms(50); ergodox_left_led_2_off(); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } _delay_ms(50); ergodox_left_led_3_off(); if (!mcp23018_status) { mcp23018_status = ergodox_left_leds_update(); } #endif // ergodox_led_all_on(); //_delay_ms(333); ergodox_led_all_off(); } uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem // uint8_t sreg_prev; // sreg_prev=SREG; // cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized = true; _delay_ms(1000); } // i2c_init(); // on pins D(1,0) // _delay_ms(1000); // set pin direction // - unused : input : 1 // - input : input : 1 // - driving : output : 0 uint8_t data[] = {0b00000000, 0b00111111}; mcp23018_status = i2c_write_register(I2C_ADDR, IODIRA, data, 2, ERGODOX_EZ_I2C_TIMEOUT); if (!mcp23018_status) { // set pull-up // - unused : on : 1 // - input : on : 1 // - driving : off : 0 mcp23018_status = i2c_write_register(I2C_ADDR, GPPUA, data, 2, ERGODOX_EZ_I2C_TIMEOUT); } #ifdef LEFT_LEDS if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update(); #endif // LEFT_LEDS // SREG=sreg_prev; return mcp23018_status; } #ifdef LEFT_LEDS uint8_t ergodox_left_leds_update(void) { if (mcp23018_status) { // if there was an error return mcp23018_status; } # define LEFT_LED_1_SHIFT 7 // in MCP23018 port B # define LEFT_LED_2_SHIFT 6 // in MCP23018 port B # define LEFT_LED_3_SHIFT 7 // in MCP23018 port A // set logical value (doesn't matter on inputs) // - unused : hi-Z : 1 // - input : hi-Z : 1 // - driving : hi-Z : 1 uint8_t data[2]; data[0] = 0b11111111 & ~(ergodox_left_led_3 << LEFT_LED_3_SHIFT); data[1] = 0b11111111 & ~(ergodox_left_led_2 << LEFT_LED_2_SHIFT) & ~(ergodox_left_led_1 << LEFT_LED_1_SHIFT); mcp23018_status = i2c_write_register(I2C_ADDR, OLATA, data, 2, ERGODOX_EZ_I2C_TIMEOUT); return mcp23018_status; } #endif #ifdef SWAP_HANDS_ENABLE __attribute__((weak)) // swap-hands action needs a matrix to define the swap const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { /* Left hand, matrix positions */ {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}, {5, 13}}, {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}, {5, 12}}, {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}, {5, 11}}, {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}, {5, 10}}, {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9}}, {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8}}, {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}}, /* Right hand, matrix positions */ {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}}, {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}}, {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}}, {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}}, {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}}, {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}}, {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}}, }; #endif #ifdef RGB_MATRIX_ENABLE // clang-format off const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* driver * | R location * | | G location * | | | B location * | | | | */ {0, C3_1, C2_1, C4_1}, // LED1 on right {0, C6_1, C5_1, C7_1}, // LED2 {0, C4_2, C3_2, C5_2}, // LED3 {0, C7_2, C6_2, C8_2}, // LED4 {0, C2_3, C1_3, C3_3}, // LED5 {0, C5_3, C4_3, C6_3}, // LED6 {0, C8_3, C7_3, C9_3}, // LED7 {0, C2_4, C1_4, C3_4}, // LED8 {0, C6_4, C5_4, C7_4}, // LED9 {0, C2_5, C1_5, C3_5}, // LED10 {0, C7_5, C6_5, C8_5}, // LED11 {0, C2_6, C1_6, C3_6}, // LED12 {0, C5_6, C4_6, C6_6}, // LED13 {0, C8_6, C7_6, C9_6}, // LED14 {0, C2_7, C1_7, C3_7}, // LED15 {0, C5_7, C4_7, C6_7}, // LED16 {0, C2_8, C1_8, C3_8}, // LED17 {0, C5_8, C4_8, C6_8}, // LED18 {0, C3_9, C2_9, C4_9}, // LED19 {0, C6_9, C5_9, C7_9}, // LED20 {0, C4_10, C3_10, C5_10}, // LED21 {0, C7_10, C6_10, C8_10}, // LED22 {0, C2_11, C1_11, C3_11}, // LED23 {0, C5_11, C4_11, C6_11}, // LED24 {1, C3_1, C2_1, C4_1}, // LED1 on left {1, C6_1, C5_1, C7_1}, // LED2 {1, C4_2, C3_2, C5_2}, // LED3 {1, C7_2, C6_2, C8_2}, // LED4 {1, C2_3, C1_3, C3_3}, // LED5 {1, C5_3, C4_3, C6_3}, // LED6 {1, C8_3, C7_3, C9_3}, // LED7 {1, C2_4, C1_4, C3_4}, // LED8 {1, C6_4, C5_4, C7_4}, // LED9 {1, C2_5, C1_5, C3_5}, // LED10 {1, C7_5, C6_5, C8_5}, // LED11 {1, C2_6, C1_6, C3_6}, // LED12 {1, C5_6, C4_6, C6_6}, // LED13 {1, C8_6, C7_6, C9_6}, // LED14 {1, C2_7, C1_7, C3_7}, // LED15 {1, C5_7, C4_7, C6_7}, // LED16 {1, C2_8, C1_8, C3_8}, // LED17 {1, C5_8, C4_8, C6_8}, // LED18 {1, C3_9, C2_9, C4_9}, // LED19 {1, C6_9, C5_9, C7_9}, // LED20 {1, C4_10, C3_10, C5_10}, // LED21 {1, C7_10, C6_10, C8_10}, // LED22 {1, C2_11, C1_11, C3_11}, // LED23 {1, C5_11, C4_11, C6_11} // LED24 }; led_config_t g_led_config = { { { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, { 28, 33, 38, 43, 47, NO_LED }, { 27, 32, 37, 42, 46, NO_LED }, { 26, 31, 36, 41, 45, NO_LED }, { 25, 30, 35, 40, 44, NO_LED }, { 24, 29, 34, 39, NO_LED, NO_LED }, { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, { 0, 5, 10, 15, NO_LED, NO_LED }, { 1, 6, 11, 16, 20, NO_LED }, { 2, 7, 12, 17, 21, NO_LED }, { 3, 8, 13, 18, 22, NO_LED }, { 4, 9, 14, 19, 23, NO_LED }, { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED } }, { { 137, 0 }, { 154, 0 }, { 172, 0 }, { 189, 0 }, { 206, 0 }, { 137, 12 }, { 154, 12 }, { 172, 12 }, { 189, 12 }, { 206, 12 }, { 137, 25 }, { 154, 25 }, { 172, 25 }, { 189, 25 }, { 206, 25 }, { 137, 38 }, { 154, 38 }, { 172, 38 }, { 189, 38 }, { 206, 38 }, { 154, 51 }, { 172, 51 }, { 189, 51 }, { 206, 51 }, { 86, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 86, 12 }, { 68, 12 }, { 51, 12 }, { 34, 12 }, { 17, 12 }, { 86, 25 }, { 68, 25 }, { 51, 25 }, { 34, 25 }, { 17, 25 }, { 86, 38 }, { 68, 38 }, { 51, 38 }, { 34, 38 }, { 17, 38 }, { 68, 51 }, { 51, 51 }, { 34, 51 }, { 17, 51 } }, { 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1 } }; // clang-format on # ifdef ORYX_CONFIGURATOR void keyboard_post_init_kb(void) { rgb_matrix_enable_noeeprom(); keyboard_post_init_user(); } # endif #endif #ifdef ORYX_CONFIGURATOR bool process_record_kb(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case LED_LEVEL: if (record->event.pressed) { keyboard_config.led_level++; if (keyboard_config.led_level > 4) { keyboard_config.led_level = 0; } ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4); eeconfig_update_kb(keyboard_config.raw); layer_state_set_kb(layer_state); } break; # ifdef RGB_MATRIX_ENABLE case TOGGLE_LAYER_COLOR: if (record->event.pressed) { keyboard_config.disable_layer_led ^= 1; if (keyboard_config.disable_layer_led) rgb_matrix_set_color_all(0, 0, 0); eeconfig_update_kb(keyboard_config.raw); } break; case QK_RGB_MATRIX_TOGGLE: if (record->event.pressed) { switch (rgb_matrix_get_flags()) { case LED_FLAG_ALL: { rgb_matrix_set_flags(LED_FLAG_NONE); keyboard_config.rgb_matrix_enable = false; rgb_matrix_set_color_all(0, 0, 0); } break; default: { rgb_matrix_set_flags(LED_FLAG_ALL); keyboard_config.rgb_matrix_enable = true; } break; } eeconfig_update_kb(keyboard_config.raw); } return false; # endif } return process_record_user(keycode, record); } #endif void eeconfig_init_kb(void) { // EEPROM is getting reset! keyboard_config.raw = 0; keyboard_config.led_level = 4; keyboard_config.rgb_matrix_enable = true; eeconfig_update_kb(keyboard_config.raw); eeconfig_init_user(); } #ifdef ORYX_ENABLE static uint16_t loops = 0; static bool is_on = false; #endif #ifdef DYNAMIC_MACRO_ENABLE static bool is_dynamic_recording = false; static uint16_t dynamic_loop_timer; bool dynamic_macro_record_start_kb(int8_t direction) { if (!dynamic_macro_record_start_user(direction)) { return false; } is_dynamic_recording = true; dynamic_loop_timer = timer_read(); ergodox_right_led_1_on(); return true; } bool dynamic_macro_record_end_kb(int8_t direction) { if (!dynamic_macro_record_end_user(direction)) { return false; } is_dynamic_recording = false; layer_state_set_user(layer_state); return true; } #endif void matrix_scan_kb(void) { #ifdef DYNAMIC_MACRO_ENABLE if (is_dynamic_recording) { ergodox_right_led_1_off(); // if (timer_elapsed(dynamic_loop_timer) > 5) { static uint8_t counter; counter++; if (counter > 100) ergodox_right_led_1_on(); dynamic_loop_timer = timer_read(); } } #endif #ifdef CAPS_LOCK_STATUS led_t led_state = host_keyboard_led_state(); if(led_state.caps_lock) { ergodox_right_led_3_on(); } else { uint8_t layer = get_highest_layer(layer_state); if(layer != 1) { ergodox_right_led_3_off(); } } #endif matrix_scan_user(); }