Merge remote-tracking branch 'origin/master' into develop

keyboards/custommk/ergostrafer/config.h

@@ -0,0 +1,26 @@
+// Copyright 2023 customMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// FRAM configuration
+#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B7
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz
+
+// SPI configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B3
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B5
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B4
+#define SPI_MISO_PAL_MODE 5
+
+#define TAP_CODE_DELAY 10
+
+// Audio configuration
+#define AUDIO_PIN B8
+#define AUDIO_PWM_DRIVER PWMD4
+#define AUDIO_PWM_CHANNEL 3 
+#define AUDIO_PWM_PAL_MODE 2
+#define AUDIO_STATE_TIMER GPTD5

keyboards/custommk/ergostrafer/halconf.h

@@ -0,0 +1,30 @@
+/* Copyright 2023 customMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#define HAL_USE_SPI TRUE
+
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
+#define SERIAL_BUFFERS_SIZE 256
+
+// This enables interrupt-driven mode
+#define SPI_USE_WAIT TRUE
+
+#include_next <halconf.h>

keyboards/custommk/ergostrafer/info.json

@@ -0,0 +1,83 @@
+{
+    "manufacturer": "customMK",
+    "keyboard_name": "ErgoStrafer",
+    "maintainer": "customMK",
+    "bootloader": "stm32-dfu",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "encoder": true,
+        "audio": true
+    },
+    "matrix_pins": {
+        "cols": ["B0", "A1", "A2", "A3", "A6", "B6", "B10"],
+        "rows": ["C13", "C14", "C15", "B1", "A7", "A5"]
+    },
+    "processor": "STM32F411",
+    "url": "https://shop.custommk.com/collections/ergostrafer/products/ergostrafer",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0xFAB8",
+        "vid": "0xF35B"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "matrix": [0, 0], "label":"F9", "x":7.5, "y":0 },
+                { "matrix": [0, 1], "label":"7", "x":1.5, "y":1.25 },
+                { "matrix": [0, 2], "label":"8", "x":2.5, "y":1.25 },
+                { "matrix": [0, 3], "label":"9", "x":3.5, "y":1.25 },
+                { "matrix": [0, 4], "label":"0", "x":4.5, "y":1.25 },
+                { "matrix": [0, 5], "label":"-", "x":5.5, "y":1.25 },
+                { "matrix": [0, 6], "label":"T", "x":7.25, "y":3.25, "w":1.5 },
+
+                { "matrix": [1, 0], "label":"PrtScr", "x":7.5, "y":1 },
+                { "matrix": [1, 1], "label":"1", "x":1, "y":2.25 },
+                { "matrix": [1, 2], "label":"2", "x":2, "y":2.25 },
+                { "matrix": [1, 3], "label":"3", "x":3, "y":2.25 },
+                { "matrix": [1, 4], "label":"5", "x":5, "y":2.25 },
+                { "matrix": [1, 5], "label":"6", "x":6, "y":2.25 },
+                { "matrix": [1, 6], "label":"G", "x":7.25, "y":4.25, "w":1.5 },
+
+                { "matrix": [2, 0], "label":"F5", "x":7.5, "y":2 },
+                { "matrix": [2, 1], "label":"Tab", "x":1, "y":3.5 },
+                { "matrix": [2, 2], "label":"Q", "x":2.5, "y":3.4 },
+                { "matrix": [2, 3], "label":"4", "x":4, "y":2.25 },
+                { "matrix": [2, 4], "label":"E", "x":4.5, "y":3.4 },
+                { "matrix": [2, 5], "label":"R", "x":6, "y":3.3 },
+                { "matrix": [2, 6], "label":"B", "x":6.5, "y":5.75, "w":1.5 },
+
+                { "matrix": [3, 0], "label":"Caps Lock", "x":0, "y":3.5 },
+                { "matrix": [3, 1], "label":"L Alt", "x":0.25, "y":4.75, "w":1.5 },
+                { "matrix": [3, 2], "label":"A", "x":2.5, "y":4.5 },
+                { "matrix": [3, 3], "label":"W", "x":3.5, "y":3.4 },
+                { "matrix": [3, 4], "label":"D", "x":4.5, "y":4.5 },
+                { "matrix": [3, 5], "label":"F", "x":6, "y":4.3 },
+                { "matrix": [3, 6], "label":"P", "x":8, "y":5.75 },
+
+                { "matrix": [4, 1], "label":"L Shift", "x":0.25, "y":5.75, "w":1.5 },                    
+                { "matrix": [4, 2], "label":"Z", "x":2.5, "y":5.6 },
+                { "matrix": [4, 3], "label":"S", "x":3.5, "y":4.5 },
+                { "matrix": [4, 5], "label":"V", "x":5, "y":5.75, "w":1.5 },
+                { "matrix": [4, 6], "label":"Space", "x":6.5, "y":6.85, "w":1.75 }
+
+                { "matrix": [5, 1], "label":"L Ctrl Duck", "x":0.25, "y":6.75, "w":1.5 },
+                { "matrix": [5, 3], "label":"X", "x":3.5, "y":5.6 },
+                { "matrix": [5, 5], "label":"C", "x":4.75, "y":6.85, "w":1.75 },                   
+                { "matrix": [5, 6], "label":"L Ctrl", "x":9.5, "y":5.75 }
+            ]
+        }
+    },
+    "encoder": {
+        "rotary": [
+            { "pin_a": "A8",  "pin_b": "A4"},
+            { "pin_a": "B12", "pin_b": "B14"},
+            { "pin_a": "B15", "pin_b": "A15"}
+        ]
+    }
+}

keyboards/custommk/ergostrafer/keymaps/default/keymap.c

@@ -0,0 +1,21 @@
+// Copyright 2023 customMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_F9,   KC_7,    KC_8, KC_9,   KC_0,   KC_MINUS, KC_T,
+        KC_PSCR, KC_1,    KC_2, KC_3,   KC_5,   KC_6,     KC_G,
+        KC_F5,   KC_TAB,  KC_Q, KC_4,   KC_E,   KC_R,     KC_B,
+        KC_CAPS, KC_LALT, KC_A, KC_W,   KC_D,   KC_F,     KC_P,
+        KC_LSFT, KC_Z,    KC_S, KC_V,   KC_SPC,
+        KC_LCTL, KC_X,    KC_C, KC_LCTL
+    )
+};
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+#endif

keyboards/custommk/ergostrafer/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/custommk/ergostrafer/keymaps/via/config.h

@@ -0,0 +1,13 @@
+// Copyright 2023 customMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// With 8k FRAM, max out dynamic keymap layers and macros
+// 7x6 matrix (84 bytes) and three encoders (12 bytes) consume 96 bytes per layer
+// 32 layers consumes 3072 bytes
+#define DYNAMIC_KEYMAP_LAYER_COUNT 32
+
+// Most of the remaining space can be used for macros
+// QMK Macro keycode range allows up to 128 macros
+#define DYNAMIC_KEYMAP_MACRO_COUNT 128

keyboards/custommk/ergostrafer/keymaps/via/keymap.c

@@ -0,0 +1,21 @@
+// Copyright 2023 customMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_F9,   KC_7,    KC_8, KC_9,   KC_0,   KC_MINUS, KC_T,
+        KC_PSCR, KC_1,    KC_2, KC_3,   KC_5,   KC_6,     KC_G,
+        KC_F5,   KC_TAB,  KC_Q, KC_4,   KC_E,   KC_R,     KC_B,
+        KC_CAPS, KC_LALT, KC_A, KC_W,   KC_D,   KC_F,     KC_P,
+        KC_LSFT, KC_Z,    KC_S, KC_V,   KC_SPC,
+        KC_LCTL, KC_X,    KC_C, KC_LCTL
+    )
+};
+
+//#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+//#endif

keyboards/custommk/ergostrafer/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+ENCODER_MAP_ENABLE = yes

keyboards/custommk/ergostrafer/mcuconf.h

@@ -0,0 +1,27 @@
+/* Copyright 2023 customMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+// Used for audio
+#undef STM32_PWM_USE_TIM4
+#define STM32_PWM_USE_TIM4 TRUE
+
+// Used for FRAM
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE

keyboards/custommk/ergostrafer/readme.md

@@ -0,0 +1,27 @@
+# ergostrafer
+
+![ergostrafer](https://i.imgur.com/ncJgD3jh.jpeg)
+
+ErgoStrafer is a gaming mechanical keyboard that reproduces the layout of the discontinued SteelSeries Merc Stealth a.k.a. Zboard.
+
+* Keyboard Maintainer: [customMK](https://github.com/customMK)
+* Hardware Supported: ErgoStrafer
+* Hardware Availability: [customMK](https://shop.custommk.com/collections/ergostrafer/products/ergostrafer)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make custommk/ergostrafer:default
+
+Flashing example for this keyboard:
+
+    make custommk/ergostrafer:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the "Load" key in the top right corner) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/custommk/ergostrafer/rules.mk

@@ -0,0 +1,3 @@
+EEPROM_DRIVER = spi
+
+AUDIO_DRIVER = pwm_hardware

keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/keymap.c

@@ -60,5 +60,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                         N_PASTE     , N_UNDO        ,      KC_BSPC , KC_DEL
 
   ),
-
 };

keyboards/handwired/dactyl_manuform/4x6/keymaps/scheikled/rules.mk

@@ -8,3 +8,4 @@ COMMAND_ENABLE = no
 NKRO_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 DEBOUNCE_TYPE = asym_eager_defer_pk
+USER_NAME := scheiklp

keyboards/handwired/scottokeebs/scottonum/info.json

@@ -0,0 +1,56 @@
+{
+    "manufacturer": "ScottoKeebs",
+    "keyboard_name": "ScottoNum",
+    "maintainer": "joe-scotto",
+    "diode_direction": "COL2ROW",
+    "development_board": "promicro",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "build": {
+        "lto": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["D3", "D2", "D1", "D0"],
+            ["D4", "C6", "D7", "E6"],
+            ["B4", "B5", "F4"],
+            ["F5", "F6", "F7", "B1"],
+            ["B3", "B2"]
+        ]
+    },
+    "url": "https://scottokeebs.com",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0014",
+        "vid": "0x534B"
+    },
+    "layouts": {
+        "LAYOUT_numpad_4x5": {
+            "layout": [
+                { "matrix": [0, 0], "x": 0, "y": 0 },
+                { "matrix": [0, 1], "x": 1, "y": 0 },
+                { "matrix": [0, 2], "x": 2, "y": 0 },
+                { "matrix": [0, 3], "x": 3, "y": 0 },
+                { "matrix": [1, 0], "x": 0, "y": 1 },
+                { "matrix": [1, 1], "x": 1, "y": 1 },
+                { "matrix": [1, 2], "x": 2, "y": 1 },
+                { "matrix": [1, 3], "x": 3, "y": 1 },
+                { "matrix": [2, 0], "x": 0, "y": 2 },
+                { "matrix": [2, 1], "x": 1, "y": 2 },
+                { "matrix": [2, 2], "x": 2, "y": 2 },
+                { "matrix": [3, 0], "x": 0, "y": 3 },
+                { "matrix": [3, 1], "x": 1, "y": 3 },
+                { "matrix": [3, 2], "x": 2, "y": 3 },
+                { "matrix": [3, 3], "x": 3, "y": 3 },
+                { "matrix": [4, 0], "x": 0, "y": 4 },
+                { "matrix": [4, 1], "x": 1, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/handwired/scottokeebs/scottonum/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/*
+Copyright 2023 Joe Scotto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+// Keymap
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_numpad_4x5(
+        KC_CIRCUMFLEX, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,
+        KC_KP_7,       KC_KP_8,      KC_KP_9,        KC_KP_PLUS,
+        KC_KP_4,       KC_KP_5,      KC_KP_6,
+        KC_KP_1,       KC_KP_2,      KC_KP_3,        KC_KP_ENTER,
+        KC_KP_0,       KC_KP_DOT
+    )
+};

keyboards/handwired/scottokeebs/scottonum/readme.md

@@ -0,0 +1,27 @@
+# ScottoNum
+
+![ScottoNum](https://i.imgur.com/VMiA19uh.jpg)
+
+A 17-key macropad. Case files available [here](https://github.com/joe-scotto/scottokeebs).
+
+-   Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
+-   Hardware Supported: ATmega32U4
+-   Hardware Availability: [Amazon](https://amazon.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/scottokeebs/scottonum:default
+
+Flashing example for this keyboard:
+
+    make handwired/scottokeebs/scottonum:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+-   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+-   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+-   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/handwired/scottokeebs/scottonum/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank