Merge 2ed1f2bb3a into 9bea332a21

Co-authored-by: Drashna Jaelre <drashna@live.com>

keyboards/aplusx_pulsar/xboard_qs/board.h

@@ -0,0 +1,21 @@
+/* Copyright 2020 QMK
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define STM32_HSECLK                12000000U
+#include_next <board.h>
+#undef STM32_HSE_BYPASS

keyboards/aplusx_pulsar/xboard_qs/config.h

@@ -0,0 +1,34 @@
+/* Copyright 2024 Aplusx Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define WAIT_US_TIMER GPTD3
+
+/* USB Hub Control pins  */
+#define GPIO_KM_PWEN        C1      // Hub Device Power on/off
+#define GPIO_KM_OE          C2      // Hub Host Connection on/off
+#define GPIO_KM_SEL         C0      // Hub Host Selection
+#define GPIO_TEST_DEBUG     C9      // C3-LED / C9-GPIO PAD
+
+/* RGB Underglow or WS2812 RGB Matirx  <spi driver > */
+#define WS2812_SPI_DRIVER           SPID2    
+#define WS2812_SPI_MOSI_PAL_MODE    0      
+#define WS2812_SPI_SCK_PIN          B13
+#define WS2812_SPI_SCK_PAL_MODE     5   
+#define WS2812_SPI_DIVISOR          16  
+#define WS2812_SPI_USE_CIRCULAR_BUFFER
+

keyboards/aplusx_pulsar/xboard_qs/halconf.h

@@ -0,0 +1,24 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PAL                 TRUE
+#define HAL_USE_GPT                 TRUE
+
+#define HAL_USE_SPI     TRUE
+
+#include_next <halconf.h>

keyboards/aplusx_pulsar/xboard_qs/keyboard.json

@@ -0,0 +1,327 @@
+{
+    "keyboard_name": "Pulsar XBOARD QS",
+    "manufacturer": "Pulsar",
+    "url": "https://pulsargg.kr/",
+    "maintainer": "James Yun",
+
+    "processor": "STM32F072",
+    "bootloader": "stm32-dfu",
+
+    "usb": {
+        "vid": "0x3710",
+        "pid": "0x2400",
+        "device_version": "0.0.5"
+    },
+
+    "matrix_pins": {
+        "rows": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7"],
+        "cols": ["C4", "C5", "B0", "B1", "B2", "B10", "B11", "B12", "B13", "B14", "A15", "C6", "C7", "C10", "C11", "C12"]
+    },
+    "diode_direction": "ROW2COL",
+    "build": {
+        "lto": true
+    },
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "encoder": true,
+        "rgb_matrix": true
+    },
+    "bootmagic": {
+        "matrix": [2, 7]
+    },
+    "eeprom": {
+        "wear_leveling": {
+            "backing_size": 4096
+        }
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "C13", "pin_b": "C14"}
+        ]
+    },
+    "rgb_matrix": {
+        "driver": "ws2812",
+        "default":{
+            "val": 60
+          },
+        "sleep": true,
+        "max_brightness": 220,
+        "center_point": [80, 30],
+        "sat_steps": 8,
+        "speed_steps": 10,
+        "val_steps": 8,
+        "animations": {
+            "alphas_mods": true,
+            "gradient_up_down": true,
+            "gradient_left_right": true,
+            "breathing": true,
+            "band_sat": true,
+            "band_val": true,
+            "band_pinwheel_sat": true,
+            "band_pinwheel_val": true,
+            "band_spiral_sat": true,
+            "band_spiral_val": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_up_down": true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "rainbow_moving_chevron": true,
+            "cycle_pinwheel": true,
+            "cycle_spiral": true,
+            "dual_beacon": true,
+            "rainbow_beacon": true,
+            "rainbow_pinwheels": true,
+            "raindrops": true,
+            "jellybean_raindrops": true,
+            "hue_breathing": true,
+            "hue_pendulum": true,
+            "hue_wave": true,
+            "pixel_fractal": true,
+            "pixel_flow": true,
+            "pixel_rain": true,
+            "typing_heatmap": true,
+            "digital_rain": true,
+            "solid_reactive_simple": true,
+            "solid_reactive": true,
+            "solid_reactive_wide": true,
+            "solid_reactive_multiwide": true,
+            "solid_reactive_cross": true,
+            "solid_reactive_multicross": true,
+            "solid_reactive_nexus": true,
+            "solid_reactive_multinexus": true,
+            "splash": true,
+            "multisplash": true,
+            "solid_splash": true,
+            "solid_multisplash": true
+        },
+
+        "layout": [
+            {"x": 0, "y": 0, "flags": 1},
+            {"x": 9, "y": 0, "flags": 1},
+            {"x": 18, "y": 0, "flags": 1},
+            {"x": 27, "y": 0, "flags": 1},
+            {"x": 36, "y": 0, "flags": 1},
+            {"x": 45, "y": 0, "flags": 1},
+            {"x": 54, "y": 0, "flags": 1},
+            {"x": 63, "y": 0, "flags": 1},
+            {"x": 72, "y": 0, "flags": 1},
+            {"x": 81, "y": 0, "flags": 1},
+            {"x": 90, "y": 0, "flags": 1},
+            {"x": 99, "y": 0, "flags": 1},
+            {"x": 108, "y": 0, "flags": 1},
+            {"x": 117, "y": 0, "flags": 1},
+            {"x": 126, "y": 0, "flags": 1},
+            {"x": 135, "y": 0, "flags": 1},
+            {"matrix": [6, 1], "x": 144, "y": 0, "flags": 1},
+            {"matrix": [6, 2], "x": 153, "y": 0, "flags": 1},
+            {"x": 162, "y": 0, "flags": 1},
+            {"matrix": [6, 3], "x": 171, "y": 0, "flags": 1},
+            {"x": 180, "y": 0, "flags": 1},
+            {"matrix": [0, 15], "x": 180, "y": 11, "flags": 1},
+            {"matrix": [0, 14], "x": 169, "y": 11, "flags": 1},
+            {"matrix": [0, 13], "x": 159, "y": 11, "flags": 1},
+            {"matrix": [6, 0], "x": 144, "y": 11, "flags": 1},
+            {"matrix": [0, 12], "x": 133, "y": 11, "flags": 4},
+            {"matrix": [0, 11], "x": 123, "y": 11, "flags": 4},
+            {"matrix": [0, 10], "x": 112, "y": 11, "flags": 4},
+            {"matrix": [0, 9], "x": 102, "y": 11, "flags": 4},
+            {"matrix": [0, 8], "x": 89, "y": 11, "flags": 1},
+            {"matrix": [0, 7], "x": 78, "y": 11, "flags": 1},
+            {"matrix": [0, 6], "x": 68, "y": 11, "flags": 1},
+            {"matrix": [0, 5], "x": 57, "y": 11, "flags": 1},
+            {"matrix": [0, 4], "x": 45, "y": 11, "flags": 4},
+            {"matrix": [0, 3], "x": 34, "y": 11, "flags": 4},
+            {"matrix": [0, 2], "x": 24, "y": 11, "flags": 4},
+            {"matrix": [0, 1], "x": 13, "y": 11, "flags": 4},
+            {"matrix": [0, 0], "x": 0, "y": 11, "flags": 1},
+            {"matrix": [1, 0], "x": 0, "y": 21, "flags": 4},
+            {"matrix": [1, 1], "x": 10, "y": 21, "flags": 4},
+            {"matrix": [1, 2], "x": 21, "y": 21, "flags": 4},
+            {"matrix": [1, 3], "x": 31, "y": 21, "flags": 4},
+            {"matrix": [1, 4], "x": 42, "y": 21, "flags": 4},
+            {"matrix": [1, 5], "x": 52, "y": 21, "flags": 4},
+            {"matrix": [1, 6], "x": 63, "y": 21, "flags": 4},
+            {"matrix": [1, 7], "x": 73, "y": 21, "flags": 4},
+            {"matrix": [1, 8], "x": 83, "y": 21, "flags": 4},
+            {"matrix": [1, 9], "x": 94, "y": 21, "flags": 4},
+            {"matrix": [1, 10], "x": 104, "y": 21, "flags": 4},
+            {"matrix": [1, 11], "x": 115, "y": 21, "flags": 4},
+            {"matrix": [1, 12], "x": 125, "y": 21, "flags": 4},
+            {"matrix": [1, 14], "x": 139, "y": 21, "flags": 1},
+            {"matrix": [2, 14], "x": 159, "y": 21, "flags": 1},
+            {"matrix": [2, 15], "x": 169, "y": 21, "flags": 1},
+            {"matrix": [1, 15], "x": 180, "y": 21, "flags": 1},
+            {"matrix": [3, 15], "x": 180, "y": 32, "flags": 1},
+            {"matrix": [3, 14], "x": 169, "y": 32, "flags": 1},
+            {"matrix": [3, 13], "x": 159, "y": 32, "flags": 1},
+            {"matrix": [2, 13], "x": 143, "y": 32, "flags": 4},
+            {"matrix": [2, 12], "x": 130, "y": 32, "flags": 4},
+            {"matrix": [2, 11], "x": 120, "y": 32, "flags": 4},
+            {"matrix": [2, 10], "x": 109, "y": 32, "flags": 4},
+            {"matrix": [2, 9], "x": 99, "y": 32, "flags": 4},
+            {"matrix": [2, 8], "x": 89, "y": 32, "flags": 4},
+            {"matrix": [2, 7], "x": 78, "y": 32, "flags": 4},
+            {"matrix": [2, 6], "x": 68, "y": 32, "flags": 4},
+            {"matrix": [2, 5], "x": 57, "y": 32, "flags": 4},
+            {"matrix": [2, 4], "x": 47, "y": 32, "flags": 4},
+            {"matrix": [2, 3], "x": 36, "y": 32, "flags": 4},
+            {"matrix": [2, 2], "x": 26, "y": 32, "flags": 4},
+            {"matrix": [2, 1], "x": 16, "y": 32, "flags": 4},
+            {"matrix": [2, 0], "x": 3, "y": 32, "flags": 1},
+            {"matrix": [3, 0], "x": 4, "y": 43, "flags": 1},
+            {"matrix": [3, 1], "x": 18, "y": 43, "flags": 4},
+            {"matrix": [3, 2], "x": 29, "y": 43, "flags": 4},
+            {"matrix": [3, 3], "x": 39, "y": 43, "flags": 4},
+            {"matrix": [3, 4], "x": 50, "y": 43, "flags": 4},
+            {"matrix": [3, 5], "x": 60, "y": 43, "flags": 4},
+            {"matrix": [3, 6], "x": 70, "y": 43, "flags": 4},
+            {"matrix": [3, 7], "x": 81, "y": 43, "flags": 4},
+            {"matrix": [3, 8], "x": 91, "y": 43, "flags": 4},
+            {"matrix": [3, 9], "x": 102, "y": 43, "flags": 4},
+            {"matrix": [3, 10], "x": 112, "y": 43, "flags": 4},
+            {"matrix": [3, 11], "x": 123, "y": 43, "flags": 4},
+            {"matrix": [4, 14], "x": 138, "y": 43, "flags": 1},
+            {"matrix": [4, 15], "x": 169, "y": 53, "flags": 1},
+            {"matrix": [4, 13], "x": 135, "y": 53, "flags": 1},
+            {"matrix": [4, 11], "x": 117, "y": 53, "flags": 4},
+            {"matrix": [4, 10], "x": 107, "y": 53, "flags": 4},
+            {"matrix": [4, 9], "x": 96, "y": 53, "flags": 4},
+            {"matrix": [4, 8], "x": 86, "y": 53, "flags": 4},
+            {"matrix": [4, 7], "x": 76, "y": 53, "flags": 4},
+            {"matrix": [4, 6], "x": 65, "y": 53, "flags": 4},
+            {"matrix": [4, 5], "x": 55, "y": 53, "flags": 4},
+            {"matrix": [4, 4], "x": 44, "y": 53, "flags": 4},
+            {"matrix": [4, 3], "x": 34, "y": 53, "flags": 4},
+            {"matrix": [4, 2], "x": 23, "y": 53, "flags": 4},
+            {"matrix": [4, 0], "x": 10, "y": 53, "flags": 1},
+            {"matrix": [5, 0], "x": 1, "y": 64, "flags": 1},
+            {"matrix": [5, 1], "x": 14, "y": 64, "flags": 1},
+            {"matrix": [5, 2], "x": 27, "y": 64, "flags": 1},
+            {"x": 50, "y": 64, "flags": 4},
+            {"matrix": [5, 6], "x": 66, "y": 64, "flags": 4},
+            {"x": 80, "y": 64, "flags": 4},
+            {"matrix": [5, 10], "x": 105, "y": 64, "flags": 1},
+            {"matrix": [5, 11], "x": 118, "y": 64, "flags": 1},
+            {"matrix": [5, 12], "x": 131, "y": 64, "flags": 1},
+            {"matrix": [5, 13], "x": 145, "y": 64, "flags": 1},
+            {"matrix": [5, 14], "x": 159, "y": 64, "flags": 1},
+            {"matrix": [5, 15], "x": 169, "y": 64, "flags": 1},
+            {"matrix": [6, 15], "x": 180, "y": 64, "flags": 1}
+        ]
+},    
+
+    "ws2812": {
+        "pin": "B15",
+        "driver": "spi"
+    },
+
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "matrix":[6,1],"label": "PC1", "x": 14.05, "y": 0 },
+                { "matrix":[6,2],"label": "PC2", "x": 15.3, "y": 0 },
+                { "matrix":[6,3],"label": "Audio", "x": 17, "y": 0 },
+
+                { "matrix":[0,0], "label": "Esc", "x": 0, "y": 1.3 },
+                { "matrix":[0,1], "label": "F1", "x": 1.3, "y": 1.3 },
+                { "matrix":[0,2], "label": "F2", "x": 2.3, "y": 1.3 },
+                { "matrix":[0,3], "label": "F3", "x": 3.3, "y": 1.3 },
+                { "matrix":[0,4], "label": "F4", "x": 4.3, "y": 1.3 },
+                { "matrix":[0,5], "label": "F5", "x": 5.55, "y": 1.3 },
+                { "matrix":[0,6], "label": "F6", "x": 6.55, "y": 1.3 },
+                { "matrix":[0,7], "label": "F7", "x": 7.55, "y": 1.3 },
+                { "matrix":[0,8], "label": "F8", "x": 8.55, "y": 1.3 },
+                { "matrix":[0,9], "label": "F9", "x": 9.8, "y": 1.3 },
+                { "matrix":[0,10], "label": "F10", "x": 10.8, "y": 1.3 },
+                { "matrix":[0,11], "label": "F11", "x": 11.8, "y": 1.3 },
+                { "matrix":[0,12], "label": "F12", "x": 12.8, "y": 1.3 },
+
+                { "matrix":[6,0], "label": "QUICK", "x": 14.05, "y": 1.3 },
+
+                { "matrix":[0,13], "label": "PrtSc", "x": 15.3, "y": 1.3 },
+                { "matrix":[0,14], "label": "Scroll Lock", "x": 16.3, "y": 1.3 },
+                { "matrix":[0,15], "label": "Pause", "x": 17.3, "y": 1.3 },
+
+                { "matrix":[1,0], "label": "~", "x": 0, "y": 2.5 },
+                { "matrix":[1,1], "label": "!", "x": 1, "y": 2.5 },
+                { "matrix":[1,2], "label": "@", "x": 2, "y": 2.5 },
+                { "matrix":[1,3], "label": "#", "x": 3, "y": 2.5 },
+                { "matrix":[1,4], "label": "$", "x": 4, "y": 2.5 },
+                { "matrix":[1,5], "label": "%", "x": 5, "y": 2.5 },
+                { "matrix":[1,6], "label": "^", "x": 6, "y": 2.5 },
+                { "matrix":[1,7], "label": "&", "x": 7, "y": 2.5 },
+                { "matrix":[1,8], "label": "*", "x": 8, "y": 2.5 },
+                { "matrix":[1,9], "label": "(", "x": 9, "y": 2.5 },
+                { "matrix":[1,10], "label": ")", "x": 10, "y": 2.5 },
+                { "matrix":[1,11], "label": "_", "x": 11, "y": 2.5 },
+                { "matrix":[1,12], "label": "+", "x": 12, "y": 2.5 },
+                { "matrix":[1,14], "label": "Backspace", "x": 13, "y": 2.5, "w": 2 },
+                { "matrix":[2,14], "label": "Insert", "x": 15.25, "y": 2.5 },
+                { "matrix":[2,15], "label": "Home", "x": 16.25, "y": 2.5 },
+                { "matrix":[1,15], "label": "PgUp", "x": 17.25, "y": 2.5 },
+
+                { "matrix":[2,0], "label": "Tab", "x": 0, "y": 3.5, "w": 1.5 },
+                { "matrix":[2,1], "label": "Q", "x": 1.5, "y": 3.5 },
+                { "matrix":[2,2], "label": "W", "x": 2.5, "y": 3.5 },
+                { "matrix":[2,3], "label": "E", "x": 3.5, "y": 3.5 },
+                { "matrix":[2,4], "label": "R", "x": 4.5, "y": 3.5 },
+                { "matrix":[2,5], "label": "T", "x": 5.5, "y": 3.5 },
+                { "matrix":[2,6], "label": "Y", "x": 6.5, "y": 3.5 },
+                { "matrix":[2,7], "label": "U", "x": 7.5, "y": 3.5 },
+                { "matrix":[2,8], "label": "I", "x": 8.5, "y": 3.5 },
+                { "matrix":[2,9], "label": "O", "x": 9.5, "y": 3.5 },
+                { "matrix":[2,10], "label": "P", "x": 10.5, "y": 3.5 },
+                { "matrix":[2,11], "label": "{", "x": 11.5, "y": 3.5 },
+                { "matrix":[2,12], "label": "}", "x": 12.5, "y": 3.5 },
+                { "matrix":[2,13], "label": "|", "x": 13.5, "y": 3.5, "w": 1.5 },
+                { "matrix":[3,13], "label": "Delete", "x": 15.25, "y": 3.5 },
+                { "matrix":[3,14], "label": "End", "x": 16.25, "y": 3.5 },
+                { "matrix":[3,15], "label": "PgDn", "x": 17.25, "y": 3.5 },
+
+                { "matrix":[3,0], "label": "Caps Lock", "x": 0, "y": 4.5, "w": 1.75 },
+                { "matrix":[3,1], "label": "A", "x": 1.75, "y": 4.5 },
+                { "matrix":[3,2], "label": "S", "x": 2.75, "y": 4.5 },
+                { "matrix":[3,3], "label": "D", "x": 3.75, "y": 4.5 },
+                { "matrix":[3,4], "label": "F", "x": 4.75, "y": 4.5 },
+                { "matrix":[3,5], "label": "G", "x": 5.75, "y": 4.5 },
+                { "matrix":[3,6], "label": "H", "x": 6.75, "y": 4.5 },
+                { "matrix":[3,7], "label": "J", "x": 7.75, "y": 4.5 },
+                { "matrix":[3,8], "label": "K", "x": 8.75, "y": 4.5 },
+                { "matrix":[3,9], "label": "L", "x": 9.75, "y": 4.5 },
+                { "matrix":[3,10], "label": ":", "x": 10.75, "y": 4.5 },
+                { "matrix":[3,11], "label": "\"", "x": 11.75, "y": 4.5 },
+                { "matrix":[4,14], "label": "Enter", "x": 12.75, "y": 4.5, "w": 2.25 },
+
+                { "matrix":[4,0], "label": "Shift", "x": 0, "y": 5.5, "w": 2.25 },
+                { "matrix":[4,2], "label": "Z", "x": 2.25, "y": 5.5 },
+                { "matrix":[4,3], "label": "X", "x": 3.25, "y": 5.5 },
+                { "matrix":[4,4], "label": "C", "x": 4.25, "y": 5.5 },
+                { "matrix":[4,5], "label": "V", "x": 5.25, "y": 5.5 },
+                { "matrix":[4,6], "label": "B", "x": 6.25, "y": 5.5 },
+                { "matrix":[4,7], "label": "N", "x": 7.25, "y": 5.5 },
+                { "matrix":[4,8], "label": "M", "x": 8.25, "y": 5.5 },
+                { "matrix":[4,9], "label": "<", "x": 9.25, "y": 5.5 },
+                { "matrix":[4,10], "label": ">", "x": 10.25, "y": 5.5 },
+                { "matrix":[4,11], "label": "?", "x": 11.25, "y": 5.5 },
+                { "matrix":[4,13], "label": "Shift", "x": 12.25, "y": 5.5, "w": 2.75 },
+                { "matrix":[4,15], "label": "Up", "x": 16.25, "y": 5.5 },
+
+                { "matrix":[5,0], "label": "Ctrl", "x": 0, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,1], "label": "Win", "x": 1.25, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,2], "label": "Alt", "x": 2.5, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,6], "label": "Space","x": 3.75, "y": 6.5, "w": 6.25 },
+                { "matrix":[5,10], "label": "Alt", "x": 10, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,11], "label": "Fn", "x": 11.25, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,12], "label": "Menu", "x": 12.5, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,13], "label": "Ctrl", "x": 13.75, "y": 6.5, "w": 1.25 },
+                { "matrix":[5,14], "label": "Left", "x": 15.25, "y": 6.5 },
+                { "matrix":[5,15], "label": "Down", "x": 16.25, "y": 6.5 },
+                { "matrix":[6,15], "label": "Right", "x": 17.25, "y": 6.5 }
+            ]
+        }
+    }
+}

keyboards/aplusx_pulsar/xboard_qs/keymaps/default/keymap.c

@@ -0,0 +1,77 @@
+/* Copyright 2024 Aplusx Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum _layer {
+    WIN_BASE,
+    WIN_FN,
+    MAC_BASE,
+    MAC_FN,
+};
+
+#define KC_TASK LGUI(KC_TAB)
+#define KC_DIC  LGUI(KC_H)      // WIN ; 받아쓰기
+#define KC_LOCK2 LGUI(KC_L)     // WIN ; pc잠금
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+     [WIN_BASE] = LAYOUT( /* Layer 0 ; WIN Base Layer */
+                                                                                                                        KC_VOLD, KC_VOLU, KC_MUTE,
+        KC_ESC,    KC_F1, KC_F2, KC_F3, KC_F4,      KC_F5,  KC_F6,  KC_F7,  KC_F8,    KC_F9, KC_F10, KC_F11, KC_F12,  KC_F13, KC_PSCR, KC_SCRL,KC_PAUS,
+        KC_GRV,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,   KC_0,   KC_MINS,   KC_EQL,  KC_BSPC,           KC_INS, KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,   KC_P,   KC_LBRC,   KC_RBRC, KC_BSLS,           KC_DEL, KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,  KC_L,   KC_SCLN, KC_QUOT,            KC_ENT,
+        KC_LSFT,        KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM, KC_DOT, KC_SLSH,           KC_RSFT,                    KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,        KC_RALT,  MO(WIN_FN),  KC_APP,  KC_RCTL,                     KC_LEFT, KC_DOWN, KC_RGHT),
+
+     [WIN_FN] = LAYOUT( /* Layer 1 ; WIN Function Layer */
+                                                                                                                                        _______, _______, _______,
+        _______,    KC_BRID, KC_BRIU, KC_TASK, KC_WSCH, KC_DIC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU,       _______, KC_CALC, KC_WHOM,KC_LOCK2,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  NK_OFF,  NK_ON,  RGB_TOG,          RGB_SAI, RGB_HUI, RGB_MOD,
+        _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_SAD, RGB_HUD, RGB_RMOD,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, QK_BOOT,          _______,
+        _______,      KC_BTN4, KC_BTN3, KC_BTN5, _______, _______, _______, _______,  _______, _______, _______,            _______,                   RGB_VAI,
+        _______, GU_TOGG, _______,                             _______,                            _______,_______, _______, _______,          RGB_SPD, RGB_VAD, RGB_SPI),
+
+    [MAC_BASE] = LAYOUT( /* Layer 2 ; MAC Base Layer */
+                                                                                                                                KC_VOLD, KC_VOLU, KC_MUTE,
+        KC_ESC,  KC_BRID, KC_BRIU, KC_TASK,  KC_WSCH, KC_DIC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE,KC_VOLD,KC_VOLU, _______, _______,_______,_______,
+        KC_GRV,  KC_1,  KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,  KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT,                     KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                       KC_RGUI,  MO(MAC_FN), KC_RALT, KC_RCTL,           KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [MAC_FN]   = LAYOUT(/* Layer 3 ; MAC Function Layer */
+                                                                                                                                _______, _______, _______,
+        _______,      KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12, _______, KC_F13, KC_F14, KC_F15,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NK_OFF,   NK_ON,  RGB_TOG,          RGB_SAI, RGB_HUI, RGB_MOD,
+        _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_SAD, RGB_HUD, RGB_RMOD,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,         KC_BTN4, KC_BTN3, KC_BTN5, _______, _______, _______, _______, _______, _______, _______,          _______,                   RGB_VAI,
+        _______, _______, _______,                         _______,                               _______, _______, _______, _______,          RGB_SPD, RGB_VAD, RGB_SPI)
+        };
+//-----------------------------------------------------------------
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [WIN_BASE] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [WIN_FN]   = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) },
+    [MAC_BASE] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [MAC_FN]   = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) }
+};
+#endif // ENCODER_MAP_ENABLE
+

keyboards/aplusx_pulsar/xboard_qs/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/aplusx_pulsar/xboard_qs/keymaps/via/keymap.c

@@ -0,0 +1,72 @@
+/* Copyright 2024 Aplusx Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum _layer {
+    WIN_BASE,
+    WIN_FN,
+    MAC_BASE,
+    MAC_FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+     [WIN_BASE] = LAYOUT( /* Layer 0 ; WIN Base Layer */
+                                                                                                                        KC_PC1, KC_PC2, KC_MUTE,
+        KC_ESC,    KC_F1, KC_F2, KC_F3, KC_F4,      KC_F5,  KC_F6,  KC_F7,  KC_F8,    KC_F9, KC_F10, KC_F11, KC_F12,  KC_TMODE, KC_PSCR, KC_SCRL,KC_PAUS,
+        KC_GRV,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,   KC_0,   KC_MINS,   KC_EQL,  KC_BSPC,           KC_INS, KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,   KC_P,   KC_LBRC,   KC_RBRC, KC_BSLS,           KC_DEL, KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,  KC_L,   KC_SCLN, KC_QUOT,            KC_ENT,
+        KC_LSFT,        KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM, KC_DOT, KC_SLSH,           KC_RSFT,                    KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,        KC_RALT,  MO(WIN_FN),  KC_APP,  KC_RCTL,                     KC_LEFT, KC_DOWN, KC_RGHT),
+
+     [WIN_FN] = LAYOUT( /* Layer 1 ; WIN Function Layer */
+                                                                                                                                        KC_PC1, KC_PC2, RGB_MOD,
+        INIT_3S,    KC_BRID, KC_BRIU, KC_TASK, KC_WSCH, KC_DIC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU,       KC_TMODE, KC_CALC, KC_WHOM,KC_LOCK2,
+        DM_RSTP, DM_REC1, DM_REC2, DM_PLY1, DM_PLY2, _______, _______, _______, _______, _______, _______,  NK_OFF,  NK_ON,  RGB_TOG,          RGB_SAI, RGB_HUI, RGB_MOD,
+        _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_SAD, RGB_HUD, RGB_RMOD,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, QK_BOOT,          _______,
+        _______,      KC_BTN4, KC_BTN3, KC_BTN5, _______, KC_S_LED, _______, _______,  _______, _______, _______,            _______,                   RGB_VAI,
+        _______, GU_TOGG, _______,                             _______,                            _______,_______, _______,  KC_TPC,          RGB_SPD, RGB_VAD, RGB_SPI),
+
+    [MAC_BASE] = LAYOUT( /* Layer 2 ; MAC Base Layer */
+                                                                                                                                KC_PC1, KC_PC2, KC_MUTE,
+        KC_ESC,  KC_BRID, KC_BRIU, KC_MCTL, KC_WSCH, KC_SIRI, KC_DOND, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE,KC_VOLD,KC_VOLU, KC_TMODE, KC_SNAP,KC_LPAD,KC_LOCK_,
+        KC_GRV,  KC_1,  KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,  KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT,                     KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                       KC_RGUI,  MO(MAC_FN), KC_RALT, KC_RCTL,           KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [MAC_FN]   = LAYOUT(/* Layer 3 ; MAC Function Layer */
+                                                                                                                                KC_PC1, KC_PC2, RGB_MOD,
+        INIT_3S,      KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_TMODE, KC_F13, KC_F14, KC_F15,
+        DM_RSTP, DM_REC1, DM_REC2, DM_PLY1, DM_PLY2, _______, _______, _______, _______, _______, _______, NK_OFF,   NK_ON,  RGB_TOG,          RGB_SAI, RGB_HUI, RGB_MOD,
+        _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_SAD, RGB_HUD, RGB_RMOD,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,         KC_BTN4, KC_BTN3, KC_BTN5, _______, KC_S_LED, _______, _______, _______, _______, _______,          _______,                   RGB_VAI,
+        _______, _______, _______,                         _______,                               _______, _______, _______,  KC_TPC,          RGB_SPD, RGB_VAD, RGB_SPI)
+        };
+//-----------------------------------------------------------------
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [WIN_BASE] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [WIN_FN]   = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) },
+    [MAC_BASE] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [MAC_FN]   = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) }
+};
+#endif // ENCODER_MAP_ENABLE

keyboards/aplusx_pulsar/xboard_qs/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+ENCODER_MAP_ENABLE = yes

keyboards/aplusx_pulsar/xboard_qs/mcuconf.h

@@ -0,0 +1,36 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_GPT_USE_TIM3
+#define STM32_GPT_USE_TIM3                  TRUE
+
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 TRUE
+
+#undef STM32_HSE_ENABLED
+#define STM32_HSE_ENABLED                   TRUE
+#undef STM32_PLLSRC
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#undef STM32_PREDIV_VALUE
+#define STM32_PREDIV_VALUE                  1
+#undef STM32_PLLMUL_VALUE
+#define STM32_PLLMUL_VALUE                  4
+#undef STM32_USBSW
+#define STM32_USBSW                         STM32_USBSW_PCLK

keyboards/aplusx_pulsar/xboard_qs/readme.md

@@ -0,0 +1,35 @@
+# Aplusx Pulsar XBOARD QS
+
+![Pulsar XBOARD QS](https://i.imgur.com/wpTinU4.jpeg)
+
+A 80% keyboard (/w 3 Special key, Encoder, USB Hub, switching 2 host function)
+
+* Keyboard Maintainer: [skylupin03](https://github.com/skylupin03)
+* Hardware Supported: Pulsar XBOARD QS
+* Hardware Availability: [Pulsar] (https://pulsargg.kr/product/list.html?cate_no=24)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aplusx_pulsar/xboard_qs:default
+    make aplusx_pulsar/xboard_qs:via
+
+Flashing example for this keyboard:
+
+    make aplusx_pulsar/xboard_qs:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**:
+    1. Unplug USB Cable.
+    2. Hold the "u" key.
+    3. Plug in the USB Cable, the Keyboard should be in ST-Bootloader state.
+
+* **Physical reset button**: Briefly press the button on the back of the PCB 
+    1. Unplug USB Cable.
+    2. Hold the Physical reset button.
+    3. Plug in the USB Cable, the Keyboard should be in ST-Bootloader state.
+
+* **Keycode in layout**: Press the key mapped to the `QK_BOOT` if set by the user

keyboards/aplusx_pulsar/xboard_qs/xboard_qs.c

@@ -0,0 +1,258 @@
+/* Copyright 2024 Aplusx Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "xboard_qs.h"
+
+static bool     INIT3S_on = false;
+static bool     INIT3S_led_on = false;
+static uint16_t INIT3S_timer;           // for custom key, INIT_3S
+
+static bool     kvm_pc_sel      = false;
+static uint16_t kvm_timer;
+static bool     kvm_sel_on      = false;
+
+static bool isMacMode = false;
+static uint8_t Status_LED_Bright;
+#define kvm_deadtime    100
+
+typedef union {
+    uint32_t raw;
+    struct {
+        bool    eeprom_kvm_pc_sel :1;
+        uint8_t eeprom_Status_LED_Bright;       //
+    };
+} keyboard_config_t;
+
+keyboard_config_t keyboard_config;
+
+void kvm_switch(bool pc_num){
+    gpio_write_pin_high(GPIO_KM_OE);
+    gpio_write_pin_low(GPIO_KM_PWEN);
+    if (!pc_num) gpio_write_pin_low(GPIO_KM_SEL);
+    else   gpio_write_pin_high(GPIO_KM_SEL);
+    gpio_write_pin_low(GPIO_KM_OE);
+
+    kvm_timer = timer_read();
+    kvm_sel_on = true;
+}
+
+void keyboard_pre_init_kb(void) {
+    gpio_set_pin_output(GPIO_KM_OE);       // H/W power on default = 0
+    gpio_set_pin_output(GPIO_KM_SEL);      // H/W power on default = 0
+    gpio_set_pin_output(GPIO_KM_PWEN);     // H/W power on default = 1
+
+    keyboard_pre_init_user();
+}
+
+void keyboard_post_init_kb(void) {
+    keyboard_config.raw = eeconfig_read_kb();                 // Read the config from EEPROM
+    kvm_pc_sel      = keyboard_config.eeprom_kvm_pc_sel;
+    kvm_switch(kvm_pc_sel);
+
+    Status_LED_Bright = keyboard_config.eeprom_Status_LED_Bright;   // 0 = 초기값, 1~5 = 50~250의 5단계 밝기
+    if (Status_LED_Bright == 0) Status_LED_Bright = 5;
+
+    keyboard_post_init_user();
+}
+
+#define HCS(report) host_consumer_send(record->event.pressed ? report : 0); return false
+#define HSS(report) host_system_send(record->event.pressed ? report : 0); return false
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    if (!process_record_user(keycode, record)) { return false; }
+    switch (keycode) {
+        case INIT_3S:
+            if (record->event.pressed){
+                INIT3S_timer = timer_read();
+                INIT3S_on    = true;
+            }
+            else{
+                INIT3S_on   = false;
+            }
+            break;
+
+        case KC_DICTATION:
+            HCS(0xCF);
+        case KC_DO_NOT_DISTURB:
+            HSS(0x9B);
+        case KC_LOCK_SCREEN:
+            HCS(0x19E);
+
+        case KC_WIN_MODE:
+            set_single_persistent_default_layer(0);
+            isMacMode = false;
+            return false;
+
+        case KC_MAC_MODE:
+            set_single_persistent_default_layer(2);
+            isMacMode = true;
+            return false;
+
+        case KC_TMODE:
+            if (record->event.pressed) {
+                if (get_highest_layer(layer_state|default_layer_state) >= 2) {
+                    set_single_persistent_default_layer(2);
+                    isMacMode = true;
+                } else {
+                    set_single_persistent_default_layer(0);
+                    isMacMode = false;
+                }
+            }
+            return false;
+
+        case KC_PC1:
+            if (record->event.pressed) {
+                if (kvm_pc_sel) {
+                    kvm_pc_sel = 0;
+                    kvm_switch(0);
+
+                    keyboard_config.eeprom_kvm_pc_sel = kvm_pc_sel;
+                    eeconfig_update_kb(keyboard_config.raw); // Writes the new status to EEPROM
+                }
+            }
+            return false;
+
+        case KC_PC2:
+            if (record->event.pressed) {
+                if (!kvm_pc_sel){
+                    kvm_pc_sel = 1;
+                    kvm_switch(1);
+
+                    keyboard_config.eeprom_kvm_pc_sel = kvm_pc_sel;
+                    eeconfig_update_kb(keyboard_config.raw); // Writes the new status to EEPROM
+                }
+            }
+            return false;
+
+        case KC_TPC:
+            if (record->event.pressed) {
+                kvm_pc_sel = !kvm_pc_sel;
+                if (kvm_pc_sel) kvm_switch(1);
+                else kvm_switch(0);
+                keyboard_config.eeprom_kvm_pc_sel = kvm_pc_sel; //
+                eeconfig_update_kb(keyboard_config.raw); // Writes the new status to EEPROM
+            }
+            return false;
+
+        case KC_S_LED:                                  // Change Status LED Brightness
+            if (record->event.pressed) {
+                if (++Status_LED_Bright > 5) {
+                    Status_LED_Bright = 1;
+                };
+                keyboard_config.eeprom_Status_LED_Bright = Status_LED_Bright; //
+                eeconfig_update_kb(keyboard_config.raw); // Writes the new status to EEPROM
+            }
+            return false;
+
+        default:
+            return true;   // Process all other keycodes normally
+    }
+    return true;
+}
+
+bool isRecording = false;           // dynamic macro REC. LED
+bool isRecordingLedOn = false;
+static uint16_t recording_timer;
+
+void housekeeping_task_kb(void) {
+
+    if (kvm_sel_on == true){
+        if (timer_elapsed(kvm_timer) > kvm_deadtime ) {
+            gpio_write_pin_high(GPIO_KM_PWEN);
+            kvm_sel_on = false;                             //// 키보드 리셋이 필요?
+        }
+    }
+
+    if (INIT3S_on == true){
+        if (timer_elapsed(INIT3S_timer) > 3000){
+            INIT3S_on = false;
+            INIT3S_led_on = true;
+            INIT3S_timer = timer_read();
+        }
+    }
+    if (INIT3S_led_on == true){
+        if(timer_elapsed(INIT3S_timer) > 2000){
+            eeconfig_init();
+            soft_reset_keyboard();
+        }
+    }
+
+    if (isRecording){
+        if(timer_elapsed(recording_timer) > 500)
+        {
+            isRecordingLedOn = !isRecordingLedOn;
+            recording_timer  = timer_read();
+        }
+    }
+}
+
+#ifdef DYNAMIC_MACRO_ENABLE
+__attribute__((weak)) void dynamic_macro_record_start_user(int8_t direction) {
+    isRecording = true;
+    isRecordingLedOn = true;
+    recording_timer = timer_read();
+}
+__attribute__((weak)) void dynamic_macro_record_end_user(int8_t direction) {
+    isRecording = false;
+    isRecordingLedOn = false;
+}
+#endif
+
+bool rgb_matrix_indicators_kb(void)  {
+    if (!rgb_matrix_indicators_user()) {
+        return false;
+    }
+
+    uint8_t Status_LED_Bright_value = Status_LED_Bright * 50;
+
+    led_t host_leds = host_keyboard_led_state();
+
+    if (host_leds.caps_lock) {
+        rgb_matrix_set_color(72, Status_LED_Bright_value, Status_LED_Bright_value, Status_LED_Bright_value);
+    }
+    if (host_leds.scroll_lock) {
+        rgb_matrix_set_color(22, Status_LED_Bright_value, Status_LED_Bright_value, Status_LED_Bright_value);
+    }
+
+    if (INIT3S_led_on == true){         // Factory Reset ; all LED is RED
+        rgb_matrix_set_color_all(0xff, 0, 0);
+    }
+
+    if (keymap_config.no_gui){                // WIN key Lock
+        rgb_matrix_set_color(99, Status_LED_Bright_value, Status_LED_Bright_value, Status_LED_Bright_value);
+    }
+
+    if (isRecordingLedOn) {             // Dynamic Macro Recording LED Blink
+        rgb_matrix_set_color(38, Status_LED_Bright_value, Status_LED_Bright_value, Status_LED_Bright_value);
+    }
+
+    if (get_highest_layer(layer_state|default_layer_state) >= 2) {
+        rgb_matrix_set_color(24,Status_LED_Bright_value,0,0);       // WIN-MAC key
+        isMacMode = true;
+
+        if (kvm_pc_sel)  rgb_matrix_set_color(103,Status_LED_Bright_value,0,0);     // MAC Mode & PC2
+        else            rgb_matrix_set_color(101,Status_LED_Bright_value,0,0);      // MAC Mode & PC1
+
+    } else {
+        rgb_matrix_set_color(24,0,0,Status_LED_Bright_value);       // WIN-MAC key
+        isMacMode = false;
+
+        if (kvm_pc_sel)  rgb_matrix_set_color(103,0,0,Status_LED_Bright_value);       // Windows Mode & PC2
+        else            rgb_matrix_set_color(101,0,0,Status_LED_Bright_value);        // Windows Mode & PC1
+    }
+
+    return false; // return TRUE;
+}

keyboards/aplusx_pulsar/xboard_qs/xboard_qs.h

@@ -0,0 +1,49 @@
+/* Copyright 2024 Aplusx Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+enum pulsar_keycodes {
+    KC_TGUI = QK_KB_0,  // Ver 0.21.6에서 변경 (USER00,)  // Toggle between GUI Lock or Unlock
+    KC_WIN_MODE,        // WINDOWS Keyboard로 변경
+    KC_MAC_MODE,        // Machintosh Keyboard로 변경
+    KC_TMODE,        // WINDOWS <--> Machintosh
+    KC_DICTATION,       // MAC_key
+    KC_DO_NOT_DISTURB,  // MAC_key
+    KC_LOCK_SCREEN,     // MAC_key
+    KC_TASK_VIEW,       // for win (gui + tap)
+    KC_FILE_EXPLORER,   // for win (gui + e)
+    KC_PC1,             // KM Switch PC1
+    KC_PC2,             // KM Switch PC2
+    KC_TPC,             // KM Switch PC1<-->PC2 Toggle
+    INIT_3S,            // EE_CLR(EEPROM CLear)(공장초기화)를 3초이상 눌러야 동작
+    KC_S_LED            // Change Status LED Brightness
+};
+
+#define KC_WINM KC_WIN_MODE
+#define KC_MACM KC_MAC_MODE
+
+#define KC_SIRI KC_DICTATION
+#define KC_DOND KC_DO_NOT_DISTURB
+#define KC_LOCK_ KC_LOCK_SCREEN
+
+#define KC_TASK LGUI(KC_TAB)
+#define KC_FLXP LGUI(KC_E)
+#define KC_DIC  LGUI(KC_H)      // WIN ; 받아쓰기
+#define KC_LOCK2 LGUI(KC_L)     // WIN ; pc잠금
+#define KC_SNAP SCMD(KC_5)      // MAC Capure ; commnd + shift + 5

lib/python/qmk/cli/new/keymap.py

@@ -1,5 +1,6 @@
 """This script automates the copying of the default keymap into your own keymap.
 """
+import re
 import shutil
 
 from milc import cli
@@ -13,6 +14,13 @@ from qmk.keyboard import keyboard_completer, keyboard_folder
 from qmk.userspace import UserspaceDefs
 
 
+def validate_keymap_name(name):
+    """Returns True if the given keymap name contains only a-z, 0-9 and underscore characters.
+    """
+    regex = re.compile(r'^[a-zA-Z0-9][a-zA-Z0-9_]+$')
+    return bool(regex.match(name))
+
+
 def prompt_keyboard():
     prompt = """{fg_yellow}Select Keyboard{style_reset_all}
 If you`re unsure you can view a full list of supported keyboards with {fg_yellow}qmk list-keyboards{style_reset_all}.
@@ -60,6 +68,10 @@ def new_keymap(cli):
         cli.log.error(f'Default keymap {{fg_cyan}}{keymap_path_default}{{fg_reset}} does not exist!')
         return False
 
+    if not validate_keymap_name(user_name):
+        cli.log.error('Keymap names must contain only {fg_cyan}a-z{fg_reset}, {fg_cyan}0-9{fg_reset} and {fg_cyan}_{fg_reset}! Please choose a different name.')
+        return False
+
     if keymap_path_new.exists():
         cli.log.error(f'Keymap {{fg_cyan}}{user_name}{{fg_reset}} already exists! Please choose a different name.')
         return False

lib/python/qmk/cli/via2json.py

@@ -29,6 +29,7 @@ def _convert_macros(via_macros):
     if len(via_macros) == 0:
         return list()
     split_regex = re.compile(r'(}\,)|(\,{)')
+    macro_group_regex = re.compile(r'({.+?})')
     macros = list()
     for via_macro in via_macros:
         # Split VIA macro to its elements
@@ -38,13 +39,28 @@ def _convert_macros(via_macros):
         macro_data = list()
         for m in macro:
             if '{' in m or '}' in m:
-                # Found keycode(s)
+                # Split macro groups
-                keycodes = m.split(',')
+                macro_groups = macro_group_regex.findall(m)
-                # Remove whitespaces and curly braces from around keycodes
+                for macro_group in macro_groups:
-                keycodes = list(map(lambda s: s.strip(' {}'), keycodes))
+                    # Remove whitespaces and curly braces from around group
-                # Remove the KC prefix
+                    macro_group = macro_group.strip(' {}')
-                keycodes = list(map(lambda s: s.replace('KC_', ''), keycodes))
+
-                macro_data.append({"action": "tap", "keycodes": keycodes})
+                    macro_action = 'tap'
+                    macro_keycodes = []
+
+                    if macro_group[0] == '+':
+                        macro_action = 'down'
+                        macro_keycodes.append(macro_group[1:])
+                    elif macro_group[0] == '-':
+                        macro_action = 'up'
+                        macro_keycodes.append(macro_group[1:])
+                    else:
+                        macro_keycodes.extend(macro_group.split(',') if ',' in macro_group else [macro_group])
+
+                    # Remove the KC prefixes
+                    macro_keycodes = list(map(lambda s: s.replace('KC_', ''), macro_keycodes))
+
+                    macro_data.append({"action": macro_action, "keycodes": macro_keycodes})
             else:
                 # Found text
                 macro_data.append(m)
@@ -54,13 +70,13 @@ def _convert_macros(via_macros):
 
 
 def _fix_macro_keys(keymap_data):
-    macro_no = re.compile(r'MACRO0?([0-9]{1,2})')
+    macro_no = re.compile(r'MACRO0?\(([0-9]{1,2})\)')
     for i in range(0, len(keymap_data)):
         for j in range(0, len(keymap_data[i])):
             kc = keymap_data[i][j]
             m = macro_no.match(kc)
             if m:
-                keymap_data[i][j] = f'MACRO_{m.group(1)}'
+                keymap_data[i][j] = f'MC_{m.group(1)}'
     return keymap_data