Merge 4401f337ce into c843ad1268

Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

keyboards/yunzii/al68/al68.c

@@ -0,0 +1,29 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+#include "uart.h"
+#include "common/smart_ble.h"
+#include "al68.h"
+
+void keyboard_pre_init_kb(void) {
+    AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_SWJ_CFG_Msk);
+    AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_DISABLE; // diable JTAG (GD32 different to STM32)
+    gpio_set_pin_output(A8);
+    gpio_write_pin_high(A8); // ENABLE USB
+    uart_init(460800);
+    wait_ms(400);
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    if (record->event.pressed) {
+        if ((keycode >= KC_BLE1) && (keycode <= KC_24G)) {
+            wireless_start(keycode - KC_USB);
+            return false;
+        } else if (keycode == KC_USB) {
+            wireless_stop();
+            return false;
+        }
+    }
+    return process_record_user(keycode, record);
+}

keyboards/yunzii/al68/al68.h

@@ -0,0 +1,23 @@
+// /* Copyright 2024 Jacky
+//  *
+//  * This program is free software: you can redistribute it and/or modify
+//  * it under the terms of the GNU General Public License as published by
+//  * the Free Software Foundation, either version 2 of the License, or
+//  * (at your option) any later version.
+//  *
+//  * This program is distributed in the hope that it will be useful,
+//  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//  * GNU General Public License for more details.
+//  *
+//  * You should have received a copy of the GNU General Public License
+//  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//  */
+
+enum custom_keycodes {
+    KC_USB = QK_KB_0,
+  KC_BLE1,
+  KC_BLE2,
+  KC_BLE3,
+  KC_24G
+};

keyboards/yunzii/al68/config.h

@@ -0,0 +1,10 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define WS2812_PWM_DRIVER PWMD4
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 7

keyboards/yunzii/al68/halconf.h

@@ -0,0 +1,8 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_PWM    TRUE
+
+#include_next <halconf.h>

keyboards/yunzii/al68/keyboard.json

@@ -0,0 +1,207 @@
+{
+    "manufacturer": "YUNZII Keyboard",
+    "keyboard_name": "AL68",
+    "maintainer": "Jeff",
+    "bootloader": "stm32duino",
+    "diode_direction": "ROW2COL",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "A7", "pin_b": "A6"}
+        ]
+    },
+    "features": {
+        "bootmagic": true,
+        "console": true,
+        "encoder": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgb_matrix": true
+    },
+    "matrix_pins": {
+        "cols": ["B0", "B2", "B10", "B11", "B12", "B13", "B14", "B15", "A14", "B3", "A15", "B5", "B6", "B7", "C13"],
+        "rows": ["A0", "A1", "A2", "A3", "A4"]
+    },
+    "processor": "STM32F103",
+    "rgb_matrix": {
+        "animations": {
+            "band_pinwheel_sat": true,
+            "band_pinwheel_val": true,
+            "band_sat": true,
+            "band_spiral_sat": true,
+            "band_spiral_val": true,
+            "band_val": true,
+            "breathing": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "cycle_pinwheel": true,
+            "cycle_spiral": true,
+            "cycle_up_down": true,
+            "dual_beacon": true,
+            "gradient_left_right": true,
+            "gradient_up_down": true,
+            "hue_breathing": true,
+            "hue_pendulum": true,
+            "hue_wave": true,
+            "rainbow_beacon": true,
+            "rainbow_moving_chevron": true,
+            "rainbow_pinwheels": true
+        },
+        "driver": "ws2812",
+        "layout": [
+            {"matrix": [4, 5], "x": 95, "y": 64, "flags": 4},
+            {"matrix": [4, 10], "x": 151, "y": 64, "flags": 4},
+            {"matrix": [4, 11], "x": 170, "y": 64, "flags": 4},
+            {"matrix": [4, 12], "x": 183, "y": 64, "flags": 4},
+            {"matrix": [4, 13], "x": 194, "y": 64, "flags": 4},
+            {"matrix": [4, 14], "x": 224, "y": 64, "flags": 4},
+            {"matrix": [3, 14], "x": 224, "y": 48, "flags": 4},
+            {"matrix": [3, 13], "x": 209, "y": 48, "flags": 4},
+            {"matrix": [3, 12], "x": 188, "y": 48, "flags": 4},
+            {"matrix": [3, 11], "x": 168, "y": 48, "flags": 4},
+            {"matrix": [3, 10], "x": 153, "y": 48, "flags": 4},
+            {"matrix": [3, 9], "x": 138, "y": 48, "flags": 4},
+            {"matrix": [3, 8], "x": 123, "y": 48, "flags": 4},
+            {"matrix": [3, 7], "x": 108, "y": 48, "flags": 4},
+            {"matrix": [3, 6], "x": 93, "y": 48, "flags": 4},
+            {"matrix": [3, 5], "x": 78, "y": 48, "flags": 4},
+            {"matrix": [3, 4], "x": 63, "y": 48, "flags": 4},
+            {"matrix": [3, 3], "x": 48, "y": 48, "flags": 4},
+            {"matrix": [3, 2], "x": 34, "y": 48, "flags": 4},
+            {"matrix": [4, 2], "x": 39, "y": 64, "flags": 4},
+            {"matrix": [4, 1], "x": 20, "y": 64, "flags": 4},
+            {"matrix": [4, 0], "x": 2, "y": 64, "flags": 4},
+            {"matrix": [3, 0], "x": 9, "y": 48, "flags": 4},
+            {"matrix": [2, 0], "x": 6, "y": 32, "flags": 4},
+            {"matrix": [2, 1], "x": 25, "y": 32, "flags": 4},
+            {"matrix": [2, 2], "x": 41, "y": 32, "flags": 4},
+            {"matrix": [2, 3], "x": 56, "y": 32, "flags": 4},
+            {"matrix": [2, 4], "x": 71, "y": 32, "flags": 4},
+            {"matrix": [2, 5], "x": 86, "y": 32, "flags": 4},
+            {"matrix": [2, 6], "x": 101, "y": 32, "flags": 4},
+            {"matrix": [2, 7], "x": 116, "y": 32, "flags": 4},
+            {"matrix": [2, 8], "x": 130, "y": 32, "flags": 4},
+            {"matrix": [2, 9], "x": 145, "y": 32, "flags": 4},
+            {"matrix": [2, 10], "x": 160, "y": 32, "flags": 4},
+            {"matrix": [2, 11], "x": 175, "y": 32, "flags": 4},
+            {"matrix": [2, 13], "x": 200, "y": 32, "flags": 4},
+            {"matrix": [2, 14], "x": 224, "y": 32, "flags": 4},
+            {"matrix": [1, 14], "x": 224, "y": 16, "flags": 4},
+            {"matrix": [1, 13], "x": 205, "y": 16, "flags": 4},
+            {"matrix": [1, 12], "x": 187, "y": 16, "flags": 4},
+            {"matrix": [1, 11], "x": 172, "y": 16, "flags": 4},
+            {"matrix": [1, 10], "x": 157, "y": 16, "flags": 4},
+            {"matrix": [1, 9], "x": 142, "y": 16, "flags": 4},
+            {"matrix": [1, 8], "x": 127, "y": 16, "flags": 4},
+            {"matrix": [1, 7], "x": 112, "y": 16, "flags": 4},
+            {"matrix": [1, 6], "x": 97, "y": 16, "flags": 4},
+            {"matrix": [1, 5], "x": 82, "y": 16, "flags": 4},
+            {"matrix": [1, 4], "x": 67, "y": 16, "flags": 4},
+            {"matrix": [1, 3], "x": 52, "y": 16, "flags": 4},
+            {"matrix": [1, 2], "x": 37, "y": 16, "flags": 4},
+            {"matrix": [1, 1], "x": 22, "y": 16, "flags": 4},
+            {"matrix": [1, 0], "x": 4, "y": 16, "flags": 4},
+            {"matrix": [0, 0], "x": 0, "y": 0, "flags": 4},
+            {"matrix": [0, 1], "x": 15, "y": 0, "flags": 4},
+            {"matrix": [0, 2], "x": 30, "y": 0, "flags": 4},
+            {"matrix": [0, 3], "x": 45, "y": 0, "flags": 4},
+            {"matrix": [0, 4], "x": 60, "y": 0, "flags": 4},
+            {"matrix": [0, 5], "x": 75, "y": 0, "flags": 4},
+            {"matrix": [0, 6], "x": 90, "y": 0, "flags": 4},
+            {"matrix": [0, 7], "x": 105, "y": 0, "flags": 4},
+            {"matrix": [0, 8], "x": 119, "y": 0, "flags": 4},
+            {"matrix": [0, 9], "x": 134, "y": 0, "flags": 4},
+            {"matrix": [0, 10], "x": 149, "y": 0, "flags": 4},
+            {"matrix": [0, 11], "x": 164, "y": 0, "flags": 4},
+            {"matrix": [0, 12], "x": 179, "y": 0, "flags": 4},
+            {"matrix": [0, 13], "x": 202, "y": 0, "flags": 4}
+        ]
+    },
+    "url": "https://www.yunzii.com",
+    "usb": {
+        "device_version": "1.0.2",
+        "no_startup_check": true,
+        "pid": "0x304E",
+        "vid": "0x414A"
+    },
+    "ws2812": {
+        "driver": "pwm",
+        "pin": "B8"
+    },
+    "community_layouts": ["65_ansi_blocker"],
+    "layouts": {
+        "LAYOUT_65_ansi_blocker": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
+                {"matrix": [0, 14], "x": 15, "y": 0, "encoder": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
+                {"matrix": [1, 14], "x": 15, "y": 1},
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
+                {"matrix": [2, 14], "x": 15, "y": 2},
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 2], "x": 2.25, "y": 3},
+                {"matrix": [3, 3], "x": 3.25, "y": 3},
+                {"matrix": [3, 4], "x": 4.25, "y": 3},
+                {"matrix": [3, 5], "x": 5.25, "y": 3},
+                {"matrix": [3, 6], "x": 6.25, "y": 3},
+                {"matrix": [3, 7], "x": 7.25, "y": 3},
+                {"matrix": [3, 8], "x": 8.25, "y": 3},
+                {"matrix": [3, 9], "x": 9.25, "y": 3},
+                {"matrix": [3, 10], "x": 10.25, "y": 3},
+                {"matrix": [3, 11], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75},
+                {"matrix": [3, 13], "x": 14, "y": 3},
+                {"matrix": [3, 14], "x": 15, "y": 3},
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
+                {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
+                {"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
+                {"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 12], "x": 13, "y": 4},
+                {"matrix": [4, 13], "x": 14, "y": 4},
+                {"matrix": [4, 14], "x": 15, "y": 4}
+            ]
+        }
+    }
+}

keyboards/yunzii/al68/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2022 Jacky
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  { ENCODER_CCW_CW(KC_VOLD, KC_VOLU)  },
+    [1] =  { ENCODER_CCW_CW(_______, _______)  }
+};
+#endif
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi_blocker(
+    KC_ESC,     KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       KC_6,       KC_7,       KC_8,       KC_9,       KC_0,       KC_MINS,    KC_EQL,     KC_BSPC,    KC_MUTE,
+    KC_TAB,     KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,       KC_Y,       KC_U,       KC_I,       KC_O,       KC_P,       KC_LBRC,    KC_RBRC,    KC_BSLS,    KC_DELETE,
+    KC_CAPS,    KC_A,       KC_S,       KC_D,       KC_F,       KC_G,       KC_H,       KC_J,       KC_K,       KC_L,       KC_SCLN,    KC_QUOT,                KC_ENT,     KC_PAGE_UP,
+    KC_LSFT,    KC_Z,       KC_X,       KC_C,       KC_V,       KC_B,       KC_N,       KC_M,       KC_COMM,    KC_DOT,     KC_SLSH,    KC_RSFT,                KC_UP,      KC_PAGE_DOWN,
+    KC_LCTL,    KC_LGUI,    KC_LALT,                            KC_SPC,                             MO(1),      KC_RCTL,                            KC_LEFT,    KC_DOWN,    KC_RIGHT    
+    ),
+    [1] = LAYOUT_65_ansi_blocker(
+    KC_GRV,     KC_BRID,    KC_BRIU,    _______,    KC_MYCM,    KC_MAIL,    KC_WHOM,    KC_MPRV,    KC_MPLY,    KC_MNXT,    _______,    KC_VOLD,    KC_VOLU,    _______,    _______,
+    _______,    KC_BLE1,    KC_BLE2,    KC_BLE3,    KC_24G,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    RGB_MOD,    _______,
+    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                RGB_HUI,    _______, 
+    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                RGB_VAI,    _______,
+    _______,    _______,     _______,                           _______,                           _______,    _______,                            RGB_SPD,    RGB_VAD,    RGB_SPI 
+    )
+};

keyboards/yunzii/al68/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/yunzii/al68/mcuconf.h

@@ -0,0 +1,11 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 TRUE
+
+#undef STM32_PWM_USE_TIM4
+#define STM32_PWM_USE_TIM4              TRUE

keyboards/yunzii/al68/readme.md

@@ -0,0 +1,25 @@
+# MK AL68
+
+
+![AL68](https://i.imgur.com/mhiYDh3.png)
+
+A customizable 68keys keyboard.
+
+* Keyboard Maintainer: [Jeff](https://github.com/yunziikeyboard)
+* Hardware Supported: [yunzii](https://www.yunzii.com)
+* Hardware Availability: [yunzii](https://www.yunzii.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make yunzii/al68:default
+
+Flashing example for this keyboard:
+
+    make yunzii/al68:default:flash
+
+See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
+
+## Bootloader ESC the bootloader in 3 ways:
+* **Bootmagic reset: Hold down Enter in the keyboard then replug
+* **Physical reset button: Briefly press the button on the back of the PCB
+* **Keycode in layout: Press the key mapped to QK_BOOT

keyboards/yunzii/al68/rules.mk

@@ -0,0 +1,3 @@
+MCU_LDSCRIPT = STM32F103xB
+UART_DRIVER_REQUIRED = yes
+SRC += ./common/smart_ble.c

keyboards/yunzii/common/smart_ble.c

@@ -0,0 +1,97 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+#include "uart.h"
+#include "ch.h"
+#include "hal.h"
+#include "host.h"
+#include "host_driver.h"
+#include "report.h"
+#include <string.h>
+#include "smart_ble.h"
+
+static uint8_t sc_ble_leds(void) {
+    return 0; // TODO: Get LED status  BLE
+}
+
+static void sc_ble_mouse(report_mouse_t *report) {
+    static uint8_t last_report[sizeof(report_mouse_t)] = {0};
+
+    if (!has_mouse_report_changed((report_mouse_t *)last_report, report)) return;
+    memcpy(last_report, report, sizeof(report_mouse_t));
+    uart_write(0x55);
+    uart_write(sizeof(report_mouse_t));
+    uart_transmit(last_report, sizeof(report_mouse_t));
+}
+
+static void sc_ble_extra(report_extra_t *report) {
+    uart_write(0x55);
+    uart_write(sizeof(report_extra_t));
+    uart_transmit((uint8_t *)report, sizeof(report_extra_t));
+}
+
+static void sc_ble_keyboard(report_keyboard_t *report) {
+    uart_write(0x55);
+    uart_write(0x09);
+    uart_write(0x01);
+    uart_transmit((uint8_t *)report, KEYBOARD_REPORT_SIZE);
+}
+
+static void sc_send_nkro(report_nkro_t *report) {
+    uart_write(0x55);
+    uart_write(0x12);
+    uart_transmit((uint8_t *)report, 0x12);
+}
+
+static host_driver_t *last_host_driver = NULL;
+static host_driver_t  sc_ble_driver    = {sc_ble_leds, sc_ble_keyboard, sc_send_nkro, sc_ble_mouse, sc_ble_extra};
+
+void smart_ble_startup(void) {
+    if (host_get_driver() == &sc_ble_driver) {
+        return;
+    }
+    clear_keyboard();
+    last_host_driver = host_get_driver();
+    host_set_driver(&sc_ble_driver);
+}
+
+void smart_ble_disconnect(void) {
+    if (host_get_driver() != &sc_ble_driver) {
+        return;
+    }
+    clear_keyboard();
+    host_set_driver(last_host_driver);
+}
+
+void sc_ble_battary(uint8_t batt_level) {
+    uart_write(0x55);
+    uart_write(0x02);
+    uart_write(0x09);
+    uart_write(batt_level);
+}
+
+void wireless_start(uint32_t mode) {
+    uint8_t ble_command[24];
+    smart_ble_startup();
+    if (mode < 1 || mode > 4) {
+        mode = 1;
+    }
+    ble_command[0] = 0x55;
+    ble_command[1] = 20;
+    ble_command[2] = 0;
+    ble_command[3] = mode;
+    strcpy((char *restrict)(ble_command + 4), PRODUCT);
+    ble_command[strlen(PRODUCT) + 4] = '-';
+    ble_command[strlen(PRODUCT) + 5] = '0' + mode;
+    ble_command[strlen(PRODUCT) + 6] = 0;
+    uart_transmit(ble_command, sizeof(ble_command));
+}
+
+void wireless_stop(void) {
+    smart_ble_disconnect();
+    uart_write(0x55);
+    uart_write(0x02);
+    uart_write(0x00);
+    uart_write(0x00);
+}

keyboards/yunzii/common/smart_ble.h

@@ -0,0 +1,9 @@
+// Copyright 2024 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+#include <stdint.h>
+
+void sc_ble_battary(uint8_t batt_level);
+void wireless_start(uint32_t mode);
+void wireless_stop(void);