keyboards/0xcb/1337/config.h

@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAP_CODE_DELAY 10
 
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 4
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -43,6 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_DEFAULT_SAT 232
   #define RGBLIGHT_DEFAULT_VAR 255
   #define RGBLIGHT_DEFAULT_SPD 2
+#endif
 // clang-format on
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

keyboards/1upkeyboards/1up60hse/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -33,6 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_SLEEP
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/1upkeyboards/1up60hte/config.h

@@ -25,6 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -39,3 +40,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/1upkeyboards/1up60rgb/config.h

@@ -7,6 +7,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -21,3 +22,4 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/1upkeyboards/super16/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16  // Add 12 if attaching the RGB LED ring
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #    ifdef RGBLIGHT_ENABLE
@@ -89,6 +90,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #        define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    endif
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/1upkeyboards/super16v2/config.h

@@ -21,8 +21,10 @@
 
 #define RGB_DI_PIN B5
 #define RGB_MATRIX_LED_COUNT 20
+#ifdef RGB_DI_PIN
 #    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #    define RGBLIGHT_LIMIT_VAL 255
+#endif
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255

keyboards/1upkeyboards/sweet16/v1/config.h

@@ -8,6 +8,7 @@
 
 /* Underglow options */
 #define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -22,3 +23,4 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/25keys/aleth42/rev0/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN C7
+#ifdef RGB_DI_PIN
    #define RGBLED_NUM 6
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/25keys/aleth42/rev1/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN B3
+#ifdef RGB_DI_PIN
    #define RGBLED_NUM 8
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/25keys/cassette42/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 5
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -34,5 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 #define OLED_FONT_H "keyboards/25keys/cassette42/common/glcdfont.c"

keyboards/40percentclub/gherkin/config.h

@@ -5,3 +5,20 @@
 
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
+
+#ifdef RGB_DI_PIN
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#    define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/abacus/config.h

@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_DI_PIN D1
 
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 17
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_SNAKE
 #    define RGBLIGHT_EFFECT_KNIGHT
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/abstract/ellipse/rev1/config.h

@@ -18,12 +18,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
    #define RGBLED_NUM 3
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/acekeyboard/titan60/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D0
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/acheron/elongate/beta/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D7
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 16
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/ada/ada1800mini/config.h

@@ -18,6 +18,7 @@
 
 //TODO: implement RGB matrix when I get the hardware
 #define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
     #define RGBLED_NUM 100
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 // generated by KBFirmware JSON to QMK Parser
 // https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/ada/infinity81/config.h

@@ -4,6 +4,7 @@
 #pragma once
 
 #define RGB_DI_PIN D0
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 107
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -20,6 +21,7 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/adpenrose/kintsugi/config.h

@@ -21,6 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Underglow options: */
 #define RGB_DI_PIN F1
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -36,3 +37,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/adpenrose/obi/config.h

@@ -7,6 +7,7 @@
 
 /* Underglow options: */
 #define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -22,3 +23,4 @@
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/ai03/polaris/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 14
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/ai03/voyager60_alps/config.h

@@ -15,12 +15,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 14
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#endif
 
 /*
  * Feature disable options

keyboards/alf/dc60/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -32,6 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/alf/x11/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 28
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/alf/x2/config.h

@@ -23,6 +23,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -37,3 +38,4 @@
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/alfredslab/swift65/hotswap/config.h

@@ -17,6 +17,7 @@
 #pragma once
 
 #define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
     #define RGBLED_NUM 22
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
@@ -34,3 +35,4 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
+#endif

keyboards/alfredslab/swift65/solder/config.h

@@ -18,6 +18,7 @@
 #pragma once
 
 #define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
     #define RGBLED_NUM 14
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
@@ -34,3 +35,4 @@
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif

keyboards/alpha/config.h

@@ -7,6 +7,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN F4
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -21,3 +22,4 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/amjkeyboard/amj60/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 8
 #    define RGBLIGHT_HUE_STEP 10
 #    define RGBLIGHT_SAT_STEP 17
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/amjkeyboard/amj96/config.h

@@ -37,6 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
 //#    define RGBLIGHT_HUE_STEP 8
 //#    define RGBLIGHT_SAT_STEP 8
@@ -53,6 +54,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/aos/tkl/config.h

@@ -23,6 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -38,3 +39,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 50
+#endif

keyboards/atlantis/ak81_ve/config.h

@@ -27,6 +27,7 @@
 #define FORCE_NKRO
 
 #define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
 
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
@@ -79,3 +80,5 @@
 #define ENABLE_RGB_MATRIX_MULTISPLASH               // Full gradient & value pulse away from multiple key hits then fades value out
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH              // Hue & value pulse away from a single key hit then fades value out
 #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH         // Hue & value pulse away from multiple key hits then fades value out
+
+#endif

keyboards/atxkb/1894/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 14
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/aves60/config.h

@@ -4,6 +4,7 @@
 #pragma once
 
 #define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
 #define RGBLED_NUM 9
 //#    define RGBLIGHT_HUE_STEP 8
 //#    define RGBLIGHT_SAT_STEP 8
@@ -21,6 +22,7 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/bioi/f60/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 5
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
@@ -34,3 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
+#endif

keyboards/blockboy/ac980mini/config.h

@@ -7,6 +7,7 @@
 #define RGB_DI_PIN B7
 // The number of LEDs connected
 #define RGB_MATRIX_LED_COUNT  81
+//#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 81
 
 #ifdef RGB_MATRIX_ENABLE

keyboards/bluebell/swoop/config.h

@@ -25,6 +25,7 @@
 
 // RGB underglow and per key
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
@@ -38,3 +39,4 @@
   #define RGBLIGHT_SAT_STEP 17
   #define RGBLIGHT_VAL_STEP 17
   #define RGBLIGHT_SLEEP
+#endif

keyboards/bolsa/bolsalice/config.h

@@ -17,6 +17,7 @@
 #pragma once
 
 #define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
     #define RGBLED_NUM 8
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
@@ -33,3 +34,4 @@
     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
     #define RGBLIGHT_EFFECT_RGB_TEST
     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bpiphany/four_banger/config.h

@@ -7,6 +7,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -21,3 +22,4 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/buildakb/potato65/config.h

@@ -39,6 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 #define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -55,3 +56,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_LIMIT_VAL 240
 #define RGBLIGHT_SLEEP
+#endif

keyboards/buildakb/potato65hs/config.h

@@ -24,6 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -40,3 +41,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 240
 #    define RGBLIGHT_SLEEP
+#endif

keyboards/buildakb/potato65s/config.h

@@ -24,6 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -40,3 +41,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 240
 #    define RGBLIGHT_SLEEP
+#endif

keyboards/cablecardesigns/cypher/rev6/config.h

@@ -8,6 +8,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
    #define RGBLED_NUM 3
    #define RGBLIGHT_HUE_STEP 12
    #define RGBLIGHT_SAT_STEP 25
@@ -24,3 +25,4 @@
    #define RGBLIGHT_EFFECT_RGB_TEST
    #define RGBLIGHT_EFFECT_ALTERNATING
    #define RGBLIGHT_EFFECT_TWINKLE
+#endif

keyboards/canary/canary60rgb/v1/config.h

@@ -16,6 +16,7 @@
  #pragma once
 
 #define RGB_DI_PIN B6
+#ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -31,6 +32,7 @@
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_SLEEP
+#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended

keyboards/cannonkeys/adelie/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
   #define RGBLED_NUM 3
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
@@ -34,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/capsunlocked/cu7/config.h

@@ -22,6 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGB_DI_PIN F1
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -39,3 +40,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
 #define RGBLIGHT_LIMIT_VAL 50
+#endif

keyboards/charue/sunsetter_r2/config.h

@@ -5,6 +5,7 @@
 
 /* RGB */
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 10
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -16,6 +17,7 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cherrybstudio/cb1800/config.h

@@ -14,6 +14,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -28,3 +29,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/cherrybstudio/cb65/config.h

@@ -15,6 +15,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* RGB Lighting */
 #define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -29,3 +30,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/cherrybstudio/cb87/config.h

@@ -14,6 +14,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -28,3 +29,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/cherrybstudio/cb87v2/config.h

@@ -14,6 +14,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -28,3 +29,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/chlx/str_merro60/config.h

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
 #   define RGBLIGHT_EFFECT_BREATHING
 #   define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #   define RGBLIGHT_EFFECT_RAINBOW_SWIRL
@@ -35,6 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define RGBLIGHT_SAT_STEP 8
 #   define RGBLIGHT_VAL_STEP 8
 #   define RGBLIGHT_SLEEP
+#endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cipulot/ec_23u/config.h

@@ -1,47 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 6
-
-/* Custom matrix pins and port select array */
-#define MATRIX_ROW_PINS \
-    { B13, B12, A7, B0 }
-#define MATRIX_COL_CHANNELS \
-    { 4, 6, 3, 2, 0, 1 }
-#define MUX_SEL_PINS \
-    { C14, C13, B6 }
-
-/* Hardware peripherals pins */
-#define APLEX_EN_PIN C15
-#define DISCHARGE_PIN A3
-#define ANALOG_PORT A2
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-//#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define DEFAULT_ACTUATION_LEVEL 550
-#define DEFAULT_RELEASE_LEVEL 500
-
-#define DISCHARGE_TIME 10

keyboards/cipulot/ec_23u/ec_switch_matrix.c

@@ -1,165 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "analog.h"
-#include "atomic_util.h"
-#include "print.h"
-#include "wait.h"
-
-/* Pin and port array */
-const uint32_t row_pins[]     = MATRIX_ROW_PINS;
-const uint8_t  col_channels[] = MATRIX_COL_CHANNELS;
-const uint32_t mux_sel_pins[] = MUX_SEL_PINS;
-
-static ecsm_config_t config;
-static uint16_t      ecsm_sw_value[MATRIX_ROWS][MATRIX_COLS];
-
-static adc_mux adcMux;
-
-static inline void discharge_capacitor(void) {
-    writePinLow(DISCHARGE_PIN);
-}
-static inline void charge_capacitor(uint8_t row) {
-    writePinHigh(DISCHARGE_PIN);
-    writePinHigh(row_pins[row]);
-}
-
-static inline void init_mux_sel(void) {
-    for (int idx = 0; idx < 3; idx++) {
-        setPinOutput(mux_sel_pins[idx]);
-    }
-}
-
-static inline void select_mux(uint8_t col) {
-    uint8_t ch = col_channels[col];
-    writePin(mux_sel_pins[0], ch & 1);
-    writePin(mux_sel_pins[1], ch & 2);
-    writePin(mux_sel_pins[2], ch & 4);
-}
-
-static inline void init_row(void) {
-    for (int idx = 0; idx < MATRIX_ROWS; idx++) {
-        setPinOutput(row_pins[idx]);
-        writePinLow(row_pins[idx]);
-    }
-}
-
-/* Initialize the peripherals pins */
-int ecsm_init(ecsm_config_t const* const ecsm_config) {
-    // Initialize config
-    config = *ecsm_config;
-
-    palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
-    adcMux = pinToMux(ANALOG_PORT);
-
-    //Dummy call to make sure that adcStart() has been called in the appropriate state
-    adc_read(adcMux);
-
-    // Initialize discharge pin as discharge mode
-    writePinLow(DISCHARGE_PIN);
-    setPinOutputOpenDrain(DISCHARGE_PIN);
-
-    // Initialize drive lines
-    init_row();
-
-    // Initialize multiplexer select pin
-    init_mux_sel();
-
-    // Enable AMUX
-    setPinOutput(APLEX_EN_PIN);
-    writePinLow(APLEX_EN_PIN);
-
-    return 0;
-}
-
-int ecsm_update(ecsm_config_t const* const ecsm_config) {
-    // Save config
-    config = *ecsm_config;
-    return 0;
-}
-
-// Read the capacitive sensor value
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
-    uint16_t sw_value = 0;
-
-    // Select the multiplexer
-    writePinHigh(APLEX_EN_PIN);
-    select_mux(col);
-    writePinLow(APLEX_EN_PIN);
-
-    // Set strobe pins to low state
-    writePinLow(row_pins[row]);
-    ATOMIC_BLOCK_FORCEON {
-        // Set the row pin to high state and have capacitor charge
-        charge_capacitor(row);
-        // Read the ADC value
-        sw_value = adc_read(adcMux);
-    }
-    // Discharge peak hold capacitor
-    discharge_capacitor();
-    // Waiting for the ghost capacitor to discharge fully
-    wait_us(DISCHARGE_TIME);
-
-    return sw_value;
-}
-
-// Update press/release state of key
-bool ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
-    bool current_state = (*current_row >> col) & 1;
-
-    // Press to release
-    if (current_state && sw_value < config.ecsm_actuation_threshold) {
-        *current_row &= ~(1 << col);
-        return true;
-    }
-
-    // Release to press
-    if ((!current_state) && sw_value > config.ecsm_release_threshold) {
-        *current_row |= (1 << col);
-        return true;
-    }
-
-    return false;
-}
-
-// Scan key values and update matrix state
-bool ecsm_matrix_scan(matrix_row_t current_matrix[]) {
-    bool updated = false;
-
-    for (int col = 0; col < sizeof(col_channels); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col] = ecsm_readkey_raw(0, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col, ecsm_sw_value[row][col]);
-        }
-    }
-
-    return updated;
-}
-
-// Debug print key values
-void ecsm_print_matrix(void) {
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            uprintf("%4d", ecsm_sw_value[row][col]);
-            if (col < (MATRIX_COLS - 1)) {
-                print(",");
-            }
-        }
-        print("\n");
-    }
-    print("\n");
-}

keyboards/cipulot/ec_23u/ec_switch_matrix.h

@@ -1,36 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "matrix.h"
-
-typedef struct {
-    uint16_t ecsm_actuation_threshold; // threshold for key release
-    uint16_t ecsm_release_threshold;   // threshold for key press
-} ecsm_config_t;
-
-ecsm_config_t ecsm_config;
-
-int      ecsm_init(ecsm_config_t const* const ecsm_config);
-int      ecsm_update(ecsm_config_t const* const ecsm_config);
-bool     ecsm_matrix_scan(matrix_row_t current_matrix[]);
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col);
-bool     ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value);
-void     ecsm_print_matrix(void);

keyboards/cipulot/ec_23u/halconf.h

@@ -1,21 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define HAL_USE_ADC TRUE
-
-#include_next <halconf.h>

keyboards/cipulot/ec_23u/info.json

@@ -1,108 +0,0 @@
-{
-    "manufacturer": "Cipulot",
-    "keyboard_name": "EC 23U",
-    "maintainer": "Cipulot",
-    "bootloader": "stm32-dfu",
-    "build": {
-        "lto": true
-    },
-    "diode_direction": "COL2ROW",
-    "features": {
-        "audio": false,
-        "backlight": false,
-        "bootmagic": true,
-        "command": false,
-        "console": true,
-        "extrakey": true,
-        "mousekey": true,
-        "nkro": true,
-        "rgblight": true
-    },
-    "mouse_key": {
-        "enabled": true
-    },
-    "indicators": {
-        "num_lock": "B14"
-    },
-    "processor": "STM32F401",
-    "rgblight": {
-        "led_count": 21,
-        "pin": "B5",
-        "animations": {
-            "alternating": true,
-            "breathing": true,
-            "christmas": true,
-            "knight": true,
-            "rainbow_mood": true,
-            "rainbow_swirl": true,
-            "rgb_test": true,
-            "snake": true,
-            "static_gradient": true,
-            "twinkle": true
-        }
-    },
-    "url": "https://www.github.com/Cipulot/EC23U",
-    "usb": {
-        "device_version": "0.0.1",
-        "pid": "0x6B95",
-        "shared_endpoint": {
-            "keyboard": true
-        },
-        "vid": "0x6369"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "x": 0.0, "y": 1.5 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.0, "y": 1.5 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.0, "y": 1.5 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.0, "y": 1.5 },
-                { "label": "2,0", "matrix": [2, 0], "x": 0.0, "y": 2.5 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.0, "y": 2.5 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.0, "y": 2.5 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.0, "y": 2.5 },
-                { "label": "3,0", "matrix": [3, 0], "x": 0.0, "y": 3.5 },
-                { "label": "3,1", "matrix": [3, 1], "x": 1.0, "y": 3.5 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.0, "y": 3.5 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.0, "y": 3.5 },
-                { "label": "2,4", "matrix": [2, 4], "x": 0.0, "y": 4.5 },
-                { "label": "0,4", "matrix": [0, 4], "x": 1.0, "y": 4.5 },
-                { "label": "1,4", "matrix": [1, 4], "x": 2.0, "y": 4.5 },
-                { "label": "3,4", "matrix": [3, 4], "x": 3.0, "y": 4.5 },
-                { "label": "2,5", "matrix": [2, 5], "x": 0.0, "y": 5.5 },
-                { "label": "0,5", "matrix": [0, 5], "x": 1.0, "y": 5.5 },
-                { "label": "1,5", "matrix": [1, 5], "x": 2.0, "y": 5.5 },
-                { "label": "3,5", "matrix": [3, 5], "x": 3.0, "y": 5.5 }
-            ]
-        },
-        "LAYOUT_numpad_6x4": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "x": 0.0, "y": 1.5 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.0, "y": 1.5 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.0, "y": 1.5 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.0, "y": 1.5 },
-                { "label": "2,0", "matrix": [2, 0], "x": 0.0, "y": 2.5 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.0, "y": 2.5 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.0, "y": 2.5 },
-                { "h": 2, "label": "3,3", "matrix": [3, 3], "x": 3.0, "y": 2.5 },
-                { "label": "3,0", "matrix": [3, 0], "x": 0.0, "y": 3.5 },
-                { "label": "3,1", "matrix": [3, 1], "x": 1.0, "y": 3.5 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.0, "y": 3.5 },
-                { "label": "2,4", "matrix": [2, 4], "x": 0.0, "y": 4.5 },
-                { "label": "0,4", "matrix": [0, 4], "x": 1.0, "y": 4.5 },
-                { "label": "1,4", "matrix": [1, 4], "x": 2.0, "y": 4.5 },
-                { "h": 2, "label": "3,4", "matrix": [3, 4], "x": 3.0, "y": 4.5 },
-                { "label": "2,5", "matrix": [2, 5], "w": 2, "x": 0.0, "y": 5.5 },
-                { "label": "1,5", "matrix": [1, 5], "x": 2.0, "y": 5.5 }
-            ]
-        }
-    }
-}

keyboards/cipulot/ec_23u/keymaps/default/keymap.c

@@ -1,54 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_all(
-        KC_ESC, KC_TAB,  KC_BSPC, MO(1),
-        KC_NUM, KC_PSLS, KC_PAST, KC_PEQL,
-        KC_P7,  KC_P8,   KC_P9,   KC_PMNS,
-        KC_P4,  KC_P5,   KC_P6,   KC_PPLS,
-        KC_P1,  KC_P2,   KC_P3,   KC_PENT,
-        KC_P0,  KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_all(
-        RGB_TOG, RGB_VAD, RGB_VAI, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, QK_BOOT, _______),
-
-
-    [2] = LAYOUT_all(
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______),
-
-    [3] = LAYOUT_all(
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______)
-    // clang-format on
-};

keyboards/cipulot/ec_23u/keymaps/numpad_6x4/keymap.c

@@ -1,54 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_numpad_6x4(
-        KC_ESC, KC_TAB,  KC_BSPC, MO(1),
-        KC_NUM, KC_PSLS, KC_PAST, KC_PEQL,
-        KC_P7,  KC_P8,   KC_P9,
-        KC_P4,  KC_P5,   KC_P6,   KC_PPLS,
-        KC_P1,  KC_P2,   KC_P3,   KC_PENT,
-        KC_P0,           KC_PDOT),
-
-    [1] = LAYOUT_numpad_6x4(
-        RGB_TOG, RGB_VAD, RGB_VAI, _______,
-        _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______,          QK_BOOT),
-
-
-    [2] = LAYOUT_numpad_6x4(
-        _______, _______, _______, _______,
-        _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______,          _______),
-
-    [3] = LAYOUT_numpad_6x4(
-        _______, _______, _______, _______,
-        _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______,          _______)
-    // clang-format on
-};

keyboards/cipulot/ec_23u/keymaps/via/config.h

@@ -1,20 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// This is the size of the EEPROM for the custom VIA-specific data
-#define EECONFIG_USER_DATA_SIZE 4

keyboards/cipulot/ec_23u/keymaps/via/keymap.c

@@ -1,54 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_all(
-        KC_ESC, KC_TAB,  KC_BSPC, MO(1),
-        KC_NUM, KC_PSLS, KC_PAST, KC_PEQL,
-        KC_P7,  KC_P8,   KC_P9,   KC_PMNS,
-        KC_P4,  KC_P5,   KC_P6,   KC_PPLS,
-        KC_P1,  KC_P2,   KC_P3,   KC_PENT,
-        KC_P0,  KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_all(
-        RGB_TOG, RGB_VAD, RGB_VAI, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, QK_BOOT, _______),
-
-
-    [2] = LAYOUT_all(
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______),
-
-    [3] = LAYOUT_all(
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______,
-        _______, _______, _______, _______)
-    // clang-format on
-};

keyboards/cipulot/ec_23u/keymaps/via/rules.mk

@@ -1,3 +0,0 @@
-VIA_ENABLE = yes
-
-SRC += via_apc.c

keyboards/cipulot/ec_23u/keymaps/via/via_apc.c

@@ -1,156 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "action.h"
-#include "via.h"
-
-void apc_init_thresholds(void);
-void apc_set_threshold(bool is_for_actuation);
-
-// Declaring an _apc_config_t struct that will store our data
-typedef struct _apc_config_t {
-    uint16_t actuation_threshold;
-    uint16_t release_threshold;
-} apc_config;
-
-// Check if the size of the reserved persistent memory is the same as the size of struct apc_config
-_Static_assert(sizeof(apc_config) == EECONFIG_USER_DATA_SIZE, "Mismatch in keyboard EECONFIG stored data");
-
-// Declaring a new variable apc of type apc_config
-apc_config apc;
-
-// Declaring enums for VIA config menu
-enum via_apc_enums {
-    // clang-format off
-    id_apc_actuation_threshold = 1,
-    id_apc_release_threshold = 2
-    // clang-format on
-};
-
-// Initializing persistent memory configuration: default values are declared and stored in PMEM
-void eeconfig_init_user(void) {
-    // Default values
-    apc.actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    apc.release_threshold   = DEFAULT_RELEASE_LEVEL;
-    // Write default value to EEPROM now
-    eeconfig_update_user_datablock(&apc);
-}
-
-// On Keyboard startup
-void keyboard_post_init_user(void) {
-    // Read custom menu variables from memory
-    eeconfig_read_user_datablock(&apc);
-    apc_init_thresholds();
-}
-
-// Handle the data received by the keyboard from the VIA menus
-void apc_config_set_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            apc.actuation_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(true);
-            break;
-        }
-        case id_apc_release_threshold: {
-            apc.release_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(false);
-            break;
-        }
-    }
-}
-
-// Handle the data sent by the keyboard to the VIA menus
-void apc_config_get_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            value_data[0] = apc.actuation_threshold >> 8;
-            value_data[1] = apc.actuation_threshold & 0xFF;
-            break;
-        }
-        case id_apc_release_threshold: {
-            value_data[0] = apc.release_threshold >> 8;
-            value_data[1] = apc.release_threshold & 0xFF;
-            break;
-        }
-    }
-}
-
-// Save the data to persistent memory after changes are made
-void apc_config_save(void) {
-    eeconfig_update_user_datablock(&apc);
-}
-
-void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
-    // data = [ command_id, channel_id, value_id, value_data ]
-    uint8_t *command_id        = &(data[0]);
-    uint8_t *channel_id        = &(data[1]);
-    uint8_t *value_id_and_data = &(data[2]);
-
-    if (*channel_id == id_custom_channel) {
-        switch (*command_id) {
-            case id_custom_set_value: {
-                apc_config_set_value(value_id_and_data);
-                break;
-            }
-            case id_custom_get_value: {
-                apc_config_get_value(value_id_and_data);
-                break;
-            }
-            case id_custom_save: {
-                apc_config_save();
-                break;
-            }
-            default: {
-                // Unhandled message.
-                *command_id = id_unhandled;
-                break;
-            }
-        }
-        return;
-    }
-
-    *command_id = id_unhandled;
-}
-
-// Initialize the thresholds
-void apc_init_thresholds(void) {
-    ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-    ecsm_config.ecsm_release_threshold   = apc.release_threshold;
-
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}
-
-// Set the thresholds
-void apc_set_threshold(bool is_for_actuation) {
-    if (is_for_actuation) {
-        ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-
-    } else {
-        ecsm_config.ecsm_release_threshold = apc.release_threshold;
-    }
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}

keyboards/cipulot/ec_23u/matrix.c

@@ -1,44 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "matrix.h"
-
-/* matrix state(1:on, 0:off) */
-extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
-extern matrix_row_t matrix[MATRIX_ROWS];     // debounced values
-
-void matrix_init_custom(void) {
-    // Default values, overwritten by VIA if enabled later
-    ecsm_config.ecsm_actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    ecsm_config.ecsm_release_threshold   = DEFAULT_RELEASE_LEVEL;
-
-    ecsm_init(&ecsm_config);
-}
-
-bool matrix_scan_custom(matrix_row_t current_matrix[]) {
-    bool updated = ecsm_matrix_scan(current_matrix);
-
-// RAW matrix values on console
-#ifdef CONSOLE_ENABLE
-    static int cnt = 0;
-    if (cnt++ == 350) {
-        cnt = 0;
-        ecsm_print_matrix();
-    }
-#endif
-    return updated;
-}

keyboards/cipulot/ec_23u/mcuconf.h

@@ -1,22 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include_next <mcuconf.h>
-
-#undef STM32_ADC_USE_ADC1
-#define STM32_ADC_USE_ADC1 TRUE

keyboards/cipulot/ec_23u/readme.md

@@ -1,27 +0,0 @@
-# EC 23U
-
-![EC 23U PCB](https://i.imgur.com/G6QK1kU.png)
-
-Open source numpad Electrostatic Capacitive PCB.
-
-* Keyboard Maintainer: [cipulot](https://github.com/cipulot)
-* Hardware Supported: EC23U
-* Hardware Availability: [Github](https://github.com/Cipulot/EC23U)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make cipulot/ec_23u:default
-
-Flashing example for this keyboard:
-
-    make cipulot/ec_23u:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/cipulot/ec_23u/rules.mk

@@ -1,3 +0,0 @@
-CUSTOM_MATRIX = lite
-QUANTUM_LIB_SRC += analog.c 
-SRC += matrix.c ec_switch_matrix.c

keyboards/cipulot/ec_60/config.h

@@ -1,45 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* Custom matrix pins and port select array */
-#define MATRIX_ROW_PINS \
-    { B15, A8, B0, A7, B1 }
-#define MATRIX_COL_CHANNELS \
-    { 0, 3, 1, 2, 5, 7, 6, 4 }
-#define MUX_SEL_PINS \
-    { B6, B5, B4 }
-
-/* Hardware peripherals pins */
-#define APLEX_EN_PIN_0 B7
-#define APLEX_EN_PIN_1 B3
-#define DISCHARGE_PIN A6
-#define ANALOG_PORT A3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define DEFAULT_ACTUATION_LEVEL 550
-#define DEFAULT_RELEASE_LEVEL 500
-
-#define DISCHARGE_TIME 10

keyboards/cipulot/ec_60/ec_switch_matrix.c

@@ -1,183 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "analog.h"
-#include "atomic_util.h"
-#include "print.h"
-#include "wait.h"
-
-/* Pin and port array */
-const uint32_t row_pins[]     = MATRIX_ROW_PINS;
-const uint8_t  col_channels[] = MATRIX_COL_CHANNELS;
-const uint32_t mux_sel_pins[] = MUX_SEL_PINS;
-
-static ecsm_config_t config;
-static uint16_t      ecsm_sw_value[MATRIX_ROWS][MATRIX_COLS];
-
-static adc_mux adcMux;
-
-static inline void discharge_capacitor(void) {
-    writePinLow(DISCHARGE_PIN);
-}
-static inline void charge_capacitor(uint8_t row) {
-    writePinHigh(DISCHARGE_PIN);
-    writePinHigh(row_pins[row]);
-}
-
-static inline void init_mux_sel(void) {
-    for (int idx = 0; idx < 3; idx++) {
-        setPinOutput(mux_sel_pins[idx]);
-    }
-}
-
-static inline void select_mux(uint8_t col) {
-    uint8_t ch = col_channels[col];
-    writePin(mux_sel_pins[0], ch & 1);
-    writePin(mux_sel_pins[1], ch & 2);
-    writePin(mux_sel_pins[2], ch & 4);
-}
-
-static inline void init_row(void) {
-    for (int idx = 0; idx < MATRIX_ROWS; idx++) {
-        setPinOutput(row_pins[idx]);
-        writePinLow(row_pins[idx]);
-    }
-}
-
-/* Initialize the peripherals pins */
-int ecsm_init(ecsm_config_t const* const ecsm_config) {
-    // Initialize config
-    config = *ecsm_config;
-
-    palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
-    adcMux = pinToMux(ANALOG_PORT);
-
-    //Dummy call to make sure that adcStart() has been called in the appropriate state
-    adc_read(adcMux);
-
-    // Initialize discharge pin as discharge mode
-    writePinLow(DISCHARGE_PIN);
-    setPinOutputOpenDrain(DISCHARGE_PIN);
-
-    // Initialize drive lines
-    init_row();
-
-    // Initialize multiplexer select pin
-    init_mux_sel();
-
-    // Enable AMUX
-    setPinOutput(APLEX_EN_PIN_0);
-    writePinLow(APLEX_EN_PIN_0);
-    setPinOutput(APLEX_EN_PIN_1);
-    writePinLow(APLEX_EN_PIN_1);
-
-    return 0;
-}
-
-int ecsm_update(ecsm_config_t const* const ecsm_config) {
-    // Save config
-    config = *ecsm_config;
-    return 0;
-}
-
-// Read the capacitive sensor value
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
-    uint16_t sw_value = 0;
-
-    // Select the multiplexer
-    if (channel == 0) {
-        writePinHigh(APLEX_EN_PIN_0);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_0);
-    } else {
-        writePinHigh(APLEX_EN_PIN_1);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_1);
-    }
-
-    // Set strobe pins to low state
-    writePinLow(row_pins[row]);
-    ATOMIC_BLOCK_FORCEON {
-        // Set the row pin to high state and have capacitor charge
-        charge_capacitor(row);
-        // Read the ADC value
-        sw_value = adc_read(adcMux);
-    }
-    // Discharge peak hold capacitor
-    discharge_capacitor();
-    // Waiting for the ghost capacitor to discharge fully
-    wait_us(DISCHARGE_TIME);
-
-    return sw_value;
-}
-
-// Update press/release state of key
-bool ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
-    bool current_state = (*current_row >> col) & 1;
-
-    // Press to release
-    if (current_state && sw_value < config.ecsm_actuation_threshold) {
-        *current_row &= ~(1 << col);
-        return true;
-    }
-
-    // Release to press
-    if ((!current_state) && sw_value > config.ecsm_release_threshold) {
-        *current_row |= (1 << col);
-        return true;
-    }
-
-    return false;
-}
-
-// Scan key values and update matrix state
-bool ecsm_matrix_scan(matrix_row_t current_matrix[]) {
-    bool updated = false;
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_1);
-    for (int col = 0; col < sizeof(col_channels); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col] = ecsm_readkey_raw(0, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col, ecsm_sw_value[row][col]);
-        }
-    }
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_0);
-    for (int col = 0; col < (sizeof(col_channels) - 1); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col + 8] = ecsm_readkey_raw(1, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col + 8, ecsm_sw_value[row][col + 8]);
-        }
-    }
-    return updated;
-}
-
-// Debug print key values
-void ecsm_print_matrix(void) {
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            uprintf("%4d", ecsm_sw_value[row][col]);
-            if (col < (MATRIX_COLS - 1)) {
-                print(",");
-            }
-        }
-        print("\n");
-    }
-    print("\n");
-}

keyboards/cipulot/ec_60/ec_switch_matrix.h

@@ -1,36 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "matrix.h"
-
-typedef struct {
-    uint16_t ecsm_actuation_threshold; // threshold for key release
-    uint16_t ecsm_release_threshold;   // threshold for key press
-} ecsm_config_t;
-
-ecsm_config_t ecsm_config;
-
-int      ecsm_init(ecsm_config_t const* const ecsm_config);
-int      ecsm_update(ecsm_config_t const* const ecsm_config);
-bool     ecsm_matrix_scan(matrix_row_t current_matrix[]);
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col);
-bool     ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value);
-void     ecsm_print_matrix(void);

keyboards/cipulot/ec_60/halconf.h

@@ -1,21 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define HAL_USE_ADC TRUE
-
-#include_next <halconf.h>

keyboards/cipulot/ec_60/info.json

@@ -1,309 +0,0 @@
-{
-    "manufacturer": "Cipulot",
-    "keyboard_name": "EC 60",
-    "maintainer": "Cipulot",
-    "bootloader": "stm32-dfu",
-    "build": {
-        "lto": true
-    },
-    "diode_direction": "COL2ROW",
-    "features": {
-        "audio": false,
-        "backlight": false,
-        "bootmagic": true,
-        "command": false,
-        "console": true,
-        "extrakey": true,
-        "mousekey": true,
-        "nkro": true,
-        "rgblight": false
-    },
-    "mouse_key": {
-        "enabled": true
-    },
-    "processor": "STM32F401",
-    "url": "https://www.github.com/Cipulot/EC60",
-    "usb": {
-        "device_version": "0.0.1",
-        "pid": "0x6B84",
-        "shared_endpoint": {
-            "keyboard": true
-        },
-        "vid": "0x6369"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4.0, "y": 0.0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5.0, "y": 0.0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6.0, "y": 0.0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7.0, "y": 0.0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8.0, "y": 0.0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9.0, "y": 0.0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10.0, "y": 0.0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11.0, "y": 0.0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12.0, "y": 0.0 },
-                { "label": "0,13", "matrix": [0, 13], "x": 13.0, "y": 0.0 },
-                { "label": "0,14", "matrix": [0, 14], "x": 14.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0.0, "y": 1.0 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1.0 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1.0 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1.0 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1.0 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1.0 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1.0 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1.0 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1.0 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1.0 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1.0 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1.0 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1.0 },
-                { "label": "1,13", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1.0 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0.0, "y": 2.0 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2.0 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2.0 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2.0 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2.0 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2.0 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2.0 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2.0 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2.0 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2.0 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2.0 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2.0 },
-                { "label": "2,12", "matrix": [2, 12], "x": 12.75, "y": 2.0 },
-                { "label": "2,13", "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 2.0 },
-                { "label": "3,0", "matrix": [3, 0], "w": 1.25, "x": 0.0, "y": 3.0 },
-                { "label": "3,1", "matrix": [3, 1], "x": 1.25, "y": 3.0 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3.0 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3.0 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3.0 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3.0 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3.0 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3.0 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3.0 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3.0 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3.0 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3.0 },
-                { "label": "3,12", "matrix": [3, 12], "w": 0.75, "x": 12.25, "y": 3.0 },
-                { "label": "3,13", "matrix": [3, 13], "w": 0.5, "x": 13.0, "y": 3.0 },
-                { "label": "3,14", "matrix": [3, 14], "w": 0.5, "x": 13.5, "y": 3.0 },
-                { "label": "4,13", "matrix": [4, 13], "w": 0.5, "x": 14.0, "y": 3.0 },
-                { "label": "4,14", "matrix": [4, 14], "w": 0.5, "x": 14.5, "y": 3.0 },
-                { "label": "4,0", "matrix": [4, 0], "w": 1.5, "x": 0.0, "y": 4.0 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4.0 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4.0 },
-                { "label": "4,4", "matrix": [4, 4], "w": 1.5, "x": 4.0, "y": 4.0 },
-                { "label": "4,5", "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 4.0 },
-                { "label": "4,6", "matrix": [4, 6], "w": 1.25, "x": 6.75, "y": 4.0 },
-                { "label": "4,7", "matrix": [4, 7], "w": 1.5, "x": 8.0, "y": 4.0 },
-                { "label": "4,9", "matrix": [4, 9], "w": 1.5, "x": 9.5, "y": 4.0 },
-                { "label": "4,10", "matrix": [4, 10], "w": 1.5, "x": 11.0, "y": 4.0 },
-                { "label": "4,11", "matrix": [4, 11], "x": 12.5, "y": 4.0 },
-                { "label": "4,12", "matrix": [4, 12], "w": 1.5, "x": 13.5, "y": 4.0 }
-            ]
-        },
-        "LAYOUT_60_ansi_tsangan": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4.0, "y": 0.0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5.0, "y": 0.0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6.0, "y": 0.0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7.0, "y": 0.0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8.0, "y": 0.0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9.0, "y": 0.0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10.0, "y": 0.0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11.0, "y": 0.0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12.0, "y": 0.0 },
-                { "label": "0,14", "matrix": [0, 14], "w": 2, "x": 13.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0.0, "y": 1.0 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1.0 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1.0 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1.0 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1.0 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1.0 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1.0 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1.0 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1.0 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1.0 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1.0 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1.0 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1.0 },
-                { "label": "1,13", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1.0 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0.0, "y": 2.0 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2.0 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2.0 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2.0 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2.0 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2.0 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2.0 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2.0 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2.0 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2.0 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2.0 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2.0 },
-                { "label": "2,13", "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2.0 },
-                { "label": "3,0", "matrix": [3, 0], "w": 2.25, "x": 0.0, "y": 3.0 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3.0 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3.0 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3.0 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3.0 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3.0 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3.0 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3.0 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3.0 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3.0 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3.0 },
-                { "label": "4,13", "matrix": [4, 13], "w": 2.75, "x": 12.25, "y": 3.0 },
-                { "label": "4,0", "matrix": [4, 0], "w": 1.5, "x": 0.0, "y": 4.0 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4.0 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4.0 },
-                { "label": "4,6", "matrix": [4, 6], "w": 7, "x": 4.0, "y": 4.0 },
-                { "label": "4,10", "matrix": [4, 10], "w": 1.5, "x": 11.0, "y": 4.0 },
-                { "label": "4,11", "matrix": [4, 11], "x": 12.5, "y": 4.0 },
-                { "label": "4,12", "matrix": [4, 12], "w": 1.5, "x": 13.5, "y": 4.0 }
-            ]
-        },
-        "LAYOUT_60_iso_tsangan": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4.0, "y": 0.0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5.0, "y": 0.0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6.0, "y": 0.0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7.0, "y": 0.0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8.0, "y": 0.0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9.0, "y": 0.0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10.0, "y": 0.0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11.0, "y": 0.0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12.0, "y": 0.0 },
-                { "label": "0,14", "matrix": [0, 14], "w": 2, "x": 13.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0.0, "y": 1.0 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1.0 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1.0 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1.0 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1.0 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1.0 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1.0 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1.0 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1.0 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1.0 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1.0 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1.0 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1.0 },
-                { "h": 2, "label": "1,13", "matrix": [1, 13], "w": 1.25, "x": 13.75, "y": 1.0 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0.0, "y": 2.0 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2.0 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2.0 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2.0 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2.0 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2.0 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2.0 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2.0 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2.0 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2.0 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2.0 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2.0 },
-                { "label": "2,12", "matrix": [2, 12], "x": 12.75, "y": 2.0 },
-                { "label": "3,0", "matrix": [3, 0], "w": 1.25, "x": 0.0, "y": 3.0 },
-                { "label": "3,1", "matrix": [3, 1], "x": 1.25, "y": 3.0 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3.0 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3.0 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3.0 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3.0 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3.0 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3.0 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3.0 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3.0 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3.0 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3.0 },
-                { "label": "4,13", "matrix": [4, 13], "w": 2.75, "x": 12.25, "y": 3.0 },
-                { "label": "4,0", "matrix": [4, 0], "w": 1.5, "x": 0.0, "y": 4.0 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4.0 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4.0 },
-                { "label": "4,6", "matrix": [4, 6], "w": 7, "x": 4.0, "y": 4.0 },
-                { "label": "4,10", "matrix": [4, 10], "w": 1.5, "x": 11.0, "y": 4.0 },
-                { "label": "4,11", "matrix": [4, 11], "x": 12.5, "y": 4.0 },
-                { "label": "4,12", "matrix": [4, 12], "w": 1.5, "x": 13.5, "y": 4.0 }
-            ]
-        },
-        "LAYOUT_60_jis": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0.0, "y": 0.0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1.0, "y": 0.0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2.0, "y": 0.0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3.0, "y": 0.0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4.0, "y": 0.0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5.0, "y": 0.0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6.0, "y": 0.0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7.0, "y": 0.0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8.0, "y": 0.0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9.0, "y": 0.0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10.0, "y": 0.0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11.0, "y": 0.0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12.0, "y": 0.0 },
-                { "label": "0,13", "matrix": [0, 13], "x": 13.0, "y": 0.0 },
-                { "label": "0,14", "matrix": [0, 14], "x": 14.0, "y": 0.0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0.0, "y": 1.0 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1.0 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1.0 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1.0 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1.0 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1.0 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1.0 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1.0 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1.0 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1.0 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1.0 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1.0 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1.0 },
-                { "h": 2, "label": "1,13", "matrix": [1, 13], "w": 1.25, "x": 13.75, "y": 1.0 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0.0, "y": 2.0 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2.0 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2.0 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2.0 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2.0 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2.0 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2.0 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2.0 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2.0 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2.0 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2.0 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2.0 },
-                { "label": "2,12", "matrix": [2, 12], "x": 12.75, "y": 2.0 },
-                { "label": "3,0", "matrix": [3, 0], "w": 2.25, "x": 0.0, "y": 3.0 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3.0 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3.0 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3.0 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3.0 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3.0 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3.0 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3.0 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3.0 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3.0 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3.0 },
-                { "label": "3,12", "matrix": [3, 12], "x": 12.25, "y": 3.0 },
-                { "label": "4,14", "matrix": [4, 14], "w": 1.75, "x": 13.25, "y": 3.0 },
-                { "label": "4,0", "matrix": [4, 0], "w": 1.5, "x": 0.0, "y": 4.0 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4.0 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4.0 },
-                { "label": "4,4", "matrix": [4, 4], "w": 1.5, "x": 4.0, "y": 4.0 },
-                { "label": "4,6", "matrix": [4, 6], "w": 2.5, "x": 5.5, "y": 4.0 },
-                { "label": "4,7", "matrix": [4, 7], "w": 1.5, "x": 8.0, "y": 4.0 },
-                { "label": "4,9", "matrix": [4, 9], "w": 1.5, "x": 9.5, "y": 4.0 },
-                { "label": "4,10", "matrix": [4, 10], "w": 1.5, "x": 11.0, "y": 4.0 },
-                { "label": "4,11", "matrix": [4, 11], "x": 12.5, "y": 4.0 },
-                { "label": "4,12", "matrix": [4, 12], "w": 1.5, "x": 13.5, "y": 4.0 }
-            ]
-        }
-    }
-}

keyboards/cipulot/ec_60/keymaps/60_ansi_tsangan/keymap.c

@@ -1,47 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_ansi_tsangan(
-        KC_GRV,  KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6,   KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y,   KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        KC_CAPS, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H,   KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
-        KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B, KC_N,   KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
-        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                 KC_RALT, MO(1),   KC_RCTL),
-
-    [1] = LAYOUT_60_ansi_tsangan(
-        KC_ESC,  KC_F1,   KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_DEL,
-        _______, _______, KC_UP,   _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                             _______,                                     _______, _______, _______),
-
-    [2] = LAYOUT_60_ansi_tsangan(
-        QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                                     _______, _______, _______),
-
-    [3] = LAYOUT_60_ansi_tsangan(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                                     _______, _______, _______)
-};

keyboards/cipulot/ec_60/keymaps/60_iso_tsangan/keymap.c

@@ -1,47 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_iso_tsangan(
-        KC_GRV,  KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6,   KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y,   KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,
-        KC_CAPS, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H,   KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,
-        KC_LSFT, KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                               KC_RALT, MO(1),   KC_RCTL),
-
-    [1] = LAYOUT_60_iso_tsangan(
-        KC_ESC,  KC_F1,   KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_DEL,
-        _______, _______, KC_UP,   _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                             _______,                                     _______, _______, _______),
-
-    [2] = LAYOUT_60_iso_tsangan(
-        QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                                     _______, _______, _______),
-
-    [3] = LAYOUT_60_iso_tsangan(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                                     _______, _______, _______)
-};

keyboards/cipulot/ec_60/keymaps/60_jis/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#include "keymap_japanese.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_jis(
-        JP_ZKHK, JP_1,    JP_2,    JP_3,    JP_4, JP_5, JP_6, JP_7,   JP_8,    JP_9,    JP_0,    JP_MINS, JP_CIRC, JP_YEN,  KC_BSPC,
-        KC_TAB,  JP_Q,    JP_W,    JP_E,    JP_R, JP_T, JP_Y, JP_U,   JP_I,    JP_O,    JP_P,    JP_AT,   JP_LBRC, KC_ENTER,
-        JP_EISU, JP_A,    JP_S,    JP_D,    JP_F, JP_G, JP_H, JP_J,   JP_K,    JP_L,    JP_SCLN, JP_COLN, JP_RBRC,
-        KC_LSFT, JP_Z,    JP_X,    JP_C,    JP_V, JP_B, JP_N, JP_M,   JP_COMM, JP_DOT,  JP_SLSH, JP_BSLS, KC_RSFT,
-        KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN,                   KC_SPC,          JP_HENK, JP_KANA, KC_RALT, MO(1),   KC_RCTL),
-
-    [1] = LAYOUT_60_jis(
-        KC_ESC,  KC_F1,   KC_F2,   KC_F3,    KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
-        _______, _______, KC_UP,   _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,                             _______,          _______, _______, _______, _______, _______),
-
-    [2] = LAYOUT_60_jis(
-        QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,                            _______,          _______, _______, _______, _______, _______),
-
-    [3] = LAYOUT_60_jis(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______,                            _______,          _______, _______, _______, _______, _______)
-};

keyboards/cipulot/ec_60/keymaps/default/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#include "keymap_japanese.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all(
-        KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,   KC_5,    KC_6,   KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   JP_YEN,   KC_BSPC,
-        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,   KC_T,    KC_Y,   KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_ENTER,
-        KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,   KC_G,    KC_H,   KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_NUHS,  KC_ENTER,
-        KC_LSFT,  KC_BSLS,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,   KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,   MO(1),     KC_RSFT,      KC_RSFT,    KC_RSFT,  MO(1),
-        KC_CAPS,  KC_LGUI,  KC_LALT,  JP_MHEN,     KC_SPC, KC_SPC,       JP_HENK,  JP_KANA,  KC_RALT,  MO(1),    KC_RCTL),
-
-    [1] = LAYOUT_all(
-        KC_ESC,   KC_F1,    KC_F2,     KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  KC_DEL,
-        _______,  _______,  KC_UP,    _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,        _______,  _______,       _______,  _______,  _______,  _______,  _______),
-
-    [2] = LAYOUT_all(
-        QK_BOOT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,       _______,  _______,       _______,  _______,  _______,  _______,  _______),
-
-    [3] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,       _______,  _______,       _______,  _______,  _______,  _______,  _______)
-};

keyboards/cipulot/ec_60/keymaps/via/config.h

@@ -1,20 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// This is the size of the EEPROM for the custom VIA-specific data
-#define EECONFIG_USER_DATA_SIZE 4

keyboards/cipulot/ec_60/keymaps/via/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#include "keymap_japanese.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all(
-        KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,   KC_5,    KC_6,   KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   JP_YEN,   KC_BSPC,
-        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,   KC_T,    KC_Y,   KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_ENTER,
-        KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,   KC_G,    KC_H,   KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_NUHS,  KC_ENTER,
-        KC_LSFT,  KC_BSLS,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,   KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,   MO(1),     KC_RSFT,      KC_RSFT,    KC_RSFT,  MO(1),
-        KC_CAPS,  KC_LGUI,  KC_LALT,  JP_MHEN,     KC_SPC, KC_SPC,       JP_HENK,  JP_KANA,  KC_RALT,  MO(1),    KC_RCTL),
-
-    [1] = LAYOUT_all(
-        KC_ESC,   KC_F1,    KC_F2,     KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  KC_DEL,
-        _______,  _______,  KC_UP,    _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,        _______,  _______,       _______,  _______,  _______,  _______,  _______),
-
-    [2] = LAYOUT_all(
-        QK_BOOT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,       _______,  _______,       _______,  _______,  _______,  _______,  _______),
-
-    [3] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,       _______,  _______,       _______,  _______,  _______,  _______,  _______)
-};

keyboards/cipulot/ec_60/keymaps/via/rules.mk

@@ -1,3 +0,0 @@
-VIA_ENABLE = yes
-
-SRC += via_apc.c

keyboards/cipulot/ec_60/keymaps/via/via_apc.c

@@ -1,156 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "action.h"
-#include "via.h"
-
-void apc_init_thresholds(void);
-void apc_set_threshold(bool is_for_actuation);
-
-// Declaring an _apc_config_t struct that will store our data
-typedef struct _apc_config_t {
-    uint16_t actuation_threshold;
-    uint16_t release_threshold;
-} apc_config;
-
-// Check if the size of the reserved persistent memory is the same as the size of struct apc_config
-_Static_assert(sizeof(apc_config) == EECONFIG_USER_DATA_SIZE, "Mismatch in keyboard EECONFIG stored data");
-
-// Declaring a new variable apc of type apc_config
-apc_config apc;
-
-// Declaring enums for VIA config menu
-enum via_apc_enums {
-    // clang-format off
-    id_apc_actuation_threshold = 1,
-    id_apc_release_threshold = 2
-    // clang-format on
-};
-
-// Initializing persistent memory configuration: default values are declared and stored in PMEM
-void eeconfig_init_user(void) {
-    // Default values
-    apc.actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    apc.release_threshold   = DEFAULT_RELEASE_LEVEL;
-    // Write default value to EEPROM now
-    eeconfig_update_user_datablock(&apc);
-}
-
-// On Keyboard startup
-void keyboard_post_init_user(void) {
-    // Read custom menu variables from memory
-    eeconfig_read_user_datablock(&apc);
-    apc_init_thresholds();
-}
-
-// Handle the data received by the keyboard from the VIA menus
-void apc_config_set_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            apc.actuation_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(true);
-            break;
-        }
-        case id_apc_release_threshold: {
-            apc.release_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(false);
-            break;
-        }
-    }
-}
-
-// Handle the data sent by the keyboard to the VIA menus
-void apc_config_get_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            value_data[0] = apc.actuation_threshold >> 8;
-            value_data[1] = apc.actuation_threshold & 0xFF;
-            break;
-        }
-        case id_apc_release_threshold: {
-            value_data[0] = apc.release_threshold >> 8;
-            value_data[1] = apc.release_threshold & 0xFF;
-            break;
-        }
-    }
-}
-
-// Save the data to persistent memory after changes are made
-void apc_config_save(void) {
-    eeconfig_update_user_datablock(&apc);
-}
-
-void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
-    // data = [ command_id, channel_id, value_id, value_data ]
-    uint8_t *command_id        = &(data[0]);
-    uint8_t *channel_id        = &(data[1]);
-    uint8_t *value_id_and_data = &(data[2]);
-
-    if (*channel_id == id_custom_channel) {
-        switch (*command_id) {
-            case id_custom_set_value: {
-                apc_config_set_value(value_id_and_data);
-                break;
-            }
-            case id_custom_get_value: {
-                apc_config_get_value(value_id_and_data);
-                break;
-            }
-            case id_custom_save: {
-                apc_config_save();
-                break;
-            }
-            default: {
-                // Unhandled message.
-                *command_id = id_unhandled;
-                break;
-            }
-        }
-        return;
-    }
-
-    *command_id = id_unhandled;
-}
-
-// Initialize the thresholds
-void apc_init_thresholds(void) {
-    ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-    ecsm_config.ecsm_release_threshold   = apc.release_threshold;
-
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}
-
-// Set the thresholds
-void apc_set_threshold(bool is_for_actuation) {
-    if (is_for_actuation) {
-        ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-
-    } else {
-        ecsm_config.ecsm_release_threshold = apc.release_threshold;
-    }
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}

keyboards/cipulot/ec_60/matrix.c

@@ -1,44 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "matrix.h"
-
-/* matrix state(1:on, 0:off) */
-extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
-extern matrix_row_t matrix[MATRIX_ROWS];     // debounced values
-
-void matrix_init_custom(void) {
-    // Default values, overwritten by VIA if enabled later
-    ecsm_config.ecsm_actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    ecsm_config.ecsm_release_threshold   = DEFAULT_RELEASE_LEVEL;
-
-    ecsm_init(&ecsm_config);
-}
-
-bool matrix_scan_custom(matrix_row_t current_matrix[]) {
-    bool updated = ecsm_matrix_scan(current_matrix);
-
-// RAW matrix values on console
-#ifdef CONSOLE_ENABLE
-    static int cnt = 0;
-    if (cnt++ == 350) {
-        cnt = 0;
-        ecsm_print_matrix();
-    }
-#endif
-    return updated;
-}

keyboards/cipulot/ec_60/mcuconf.h

@@ -1,22 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include_next <mcuconf.h>
-
-#undef STM32_ADC_USE_ADC1
-#define STM32_ADC_USE_ADC1 TRUE

keyboards/cipulot/ec_60/readme.md

@@ -1,27 +0,0 @@
-# EC 60
-
-![EC 60 PCB](https://i.imgur.com/XNwsVOnh.png)
-
-60% Electrostatic Capacitive PCB, GH60 mounting compatible, with multi-layout support
-
-* Keyboard Maintainer: [cipulot](https://github.com/Cipulot)
-* Hardware Supported: EC 60
-* Hardware Availability: [Github](https://github.com/Cipulot/EC60)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make cipulot/ec_60:default
-
-Flashing example for this keyboard:
-
-    make cipulot/ec_60:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/cipulot/ec_60/rules.mk

@@ -1,3 +0,0 @@
-CUSTOM_MATRIX = lite
-QUANTUM_LIB_SRC += analog.c 
-SRC += matrix.c ec_switch_matrix.c

keyboards/cipulot/ec_prox/ansi_iso/config.h

@@ -1,45 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* Custom matrix pins and port select array */
-#define MATRIX_ROW_PINS \
-    { A7, B0, A4, A5, A6 }
-#define MATRIX_COL_CHANNELS \
-    { 0, 3, 1, 2, 5, 7, 6, 4 }
-#define MUX_SEL_PINS \
-    { B4, B5, B6 }
-
-/* Hardware peripherals pins */
-#define APLEX_EN_PIN_0 B7
-#define APLEX_EN_PIN_1 B3
-#define DISCHARGE_PIN A2
-#define ANALOG_PORT A1
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define DEFAULT_ACTUATION_LEVEL 550
-#define DEFAULT_RELEASE_LEVEL 500
-
-#define DISCHARGE_TIME 10

keyboards/cipulot/ec_prox/ansi_iso/ec_switch_matrix.c

@@ -1,183 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "analog.h"
-#include "atomic_util.h"
-#include "print.h"
-#include "wait.h"
-
-/* Pin and port array */
-const uint32_t row_pins[]     = MATRIX_ROW_PINS;
-const uint8_t  col_channels[] = MATRIX_COL_CHANNELS;
-const uint32_t mux_sel_pins[] = MUX_SEL_PINS;
-
-static ecsm_config_t config;
-static uint16_t      ecsm_sw_value[MATRIX_ROWS][MATRIX_COLS];
-
-static adc_mux adcMux;
-
-static inline void discharge_capacitor(void) {
-    writePinLow(DISCHARGE_PIN);
-}
-static inline void charge_capacitor(uint8_t row) {
-    writePinHigh(DISCHARGE_PIN);
-    writePinHigh(row_pins[row]);
-}
-
-static inline void init_mux_sel(void) {
-    for (int idx = 0; idx < 3; idx++) {
-        setPinOutput(mux_sel_pins[idx]);
-    }
-}
-
-static inline void select_mux(uint8_t col) {
-    uint8_t ch = col_channels[col];
-    writePin(mux_sel_pins[0], ch & 1);
-    writePin(mux_sel_pins[1], ch & 2);
-    writePin(mux_sel_pins[2], ch & 4);
-}
-
-static inline void init_row(void) {
-    for (int idx = 0; idx < MATRIX_ROWS; idx++) {
-        setPinOutput(row_pins[idx]);
-        writePinLow(row_pins[idx]);
-    }
-}
-
-/* Initialize the peripherals pins */
-int ecsm_init(ecsm_config_t const* const ecsm_config) {
-    // Initialize config
-    config = *ecsm_config;
-
-    palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
-    adcMux = pinToMux(ANALOG_PORT);
-
-    // Dummy call to make sure that adcStart() has been called in the appropriate state
-    adc_read(adcMux);
-
-    // Initialize discharge pin as discharge mode
-    writePinLow(DISCHARGE_PIN);
-    setPinOutputOpenDrain(DISCHARGE_PIN);
-
-    // Initialize drive lines
-    init_row();
-
-    // Initialize multiplexer select pin
-    init_mux_sel();
-
-    // Enable AMUX
-    setPinOutput(APLEX_EN_PIN_0);
-    writePinLow(APLEX_EN_PIN_0);
-    setPinOutput(APLEX_EN_PIN_1);
-    writePinLow(APLEX_EN_PIN_1);
-
-    return 0;
-}
-
-int ecsm_update(ecsm_config_t const* const ecsm_config) {
-    // Save config
-    config = *ecsm_config;
-    return 0;
-}
-
-// Read the capacitive sensor value
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
-    uint16_t sw_value = 0;
-
-    // Select the multiplexer
-    if (channel == 0) {
-        writePinHigh(APLEX_EN_PIN_0);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_0);
-    } else {
-        writePinHigh(APLEX_EN_PIN_1);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_1);
-    }
-
-    // Set strobe pins to low state
-    writePinLow(row_pins[row]);
-    ATOMIC_BLOCK_FORCEON {
-        // Set the row pin to high state and have capacitor charge
-        charge_capacitor(row);
-        // Read the ADC value
-        sw_value = adc_read(adcMux);
-    }
-    // Discharge peak hold capacitor
-    discharge_capacitor();
-    // Waiting for the ghost capacitor to discharge fully
-    wait_us(DISCHARGE_TIME);
-
-    return sw_value;
-}
-
-// Update press/release state of key
-bool ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
-    bool current_state = (*current_row >> col) & 1;
-
-    // Press to release
-    if (current_state && sw_value < config.ecsm_actuation_threshold) {
-        *current_row &= ~(1 << col);
-        return true;
-    }
-
-    // Release to press
-    if ((!current_state) && sw_value > config.ecsm_release_threshold) {
-        *current_row |= (1 << col);
-        return true;
-    }
-
-    return false;
-}
-
-// Scan key values and update matrix state
-bool ecsm_matrix_scan(matrix_row_t current_matrix[]) {
-    bool updated = false;
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_1);
-    for (int col = 0; col < sizeof(col_channels); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col] = ecsm_readkey_raw(0, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col, ecsm_sw_value[row][col]);
-        }
-    }
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_0);
-    for (int col = 0; col < (sizeof(col_channels) - 1); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col + 8] = ecsm_readkey_raw(1, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col + 8, ecsm_sw_value[row][col + 8]);
-        }
-    }
-    return updated;
-}
-
-// Debug print key values
-void ecsm_print_matrix(void) {
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            uprintf("%4d", ecsm_sw_value[row][col]);
-            if (col < (MATRIX_COLS - 1)) {
-                print(",");
-            }
-        }
-        print("\n");
-    }
-    print("\n");
-}

keyboards/cipulot/ec_prox/ansi_iso/ec_switch_matrix.h

@@ -1,36 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "matrix.h"
-
-typedef struct {
-    uint16_t ecsm_actuation_threshold; // threshold for key release
-    uint16_t ecsm_release_threshold;   // threshold for key press
-} ecsm_config_t;
-
-ecsm_config_t ecsm_config;
-
-int      ecsm_init(ecsm_config_t const* const ecsm_config);
-int      ecsm_update(ecsm_config_t const* const ecsm_config);
-bool     ecsm_matrix_scan(matrix_row_t current_matrix[]);
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col);
-bool     ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value);
-void     ecsm_print_matrix(void);

keyboards/cipulot/ec_prox/ansi_iso/halconf.h

@@ -1,21 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define HAL_USE_ADC TRUE
-
-#include_next <halconf.h>

keyboards/cipulot/ec_prox/ansi_iso/info.json

@@ -1,182 +0,0 @@
-{
-    "manufacturer": "Cipulot",
-    "keyboard_name": "EC Pro X ANSI/ISO",
-    "maintainer": "Cipulot",
-    "bootloader": "stm32-dfu",
-    "build": {
-        "lto": true
-    },
-    "diode_direction": "COL2ROW",
-    "features": {
-        "audio": false,
-        "backlight": false,
-        "bootmagic": true,
-        "command": false,
-        "console": true,
-        "extrakey": true,
-        "mousekey": true,
-        "nkro": true,
-        "rgblight": true
-    },
-    "mouse_key": {
-        "enabled": true
-    },
-    "processor": "STM32F401",
-    "rgblight": {
-        "led_count": 22,
-        "pin": "B12",
-        "animations": {
-            "alternating": true,
-            "breathing": true,
-            "christmas": true,
-            "knight": true,
-            "rainbow_mood": true,
-            "rainbow_swirl": true,
-            "rgb_test": true,
-            "snake": true,
-            "static_gradient": true,
-            "twinkle": true
-        }
-    },
-    "url": "https://www.github.com/Cipulot/EC-Pro-X",
-    "usb": {
-        "device_version": "0.0.1",
-        "pid": "0x6B98",
-        "shared_endpoint": {
-            "keyboard": true
-        },
-        "vid": "0x6369"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0, "y": 0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1, "y": 0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2, "y": 0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3, "y": 0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4, "y": 0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5, "y": 0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6, "y": 0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7, "y": 0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8, "y": 0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9, "y": 0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10, "y": 0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11, "y": 0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12, "y": 0 },
-                { "label": "0,13", "matrix": [0, 13], "x": 13, "y": 0 },
-                { "label": "0,14", "matrix": [0, 14], "x": 14, "y": 0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1 },
-                { "label": "1,13", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2 },
-                { "label": "2,12", "matrix": [2, 12], "x": 12.75, "y": 2 },
-                { "label": "2,13", "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 2 },
-                { "label": "3,0", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 },
-                { "label": "3,1", "matrix": [3, 1], "x": 1.25, "y": 3 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3 },
-                { "label": "3,13", "matrix": [3, 13], "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "3,14", "matrix": [3, 14], "x": 14, "y": 3 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4 },
-                { "label": "4,6", "matrix": [4, 6], "w": 6, "x": 4, "y": 4 },
-                { "label": "4,9", "matrix": [4, 9], "w": 1.5, "x": 10, "y": 4 },
-                { "label": "4,10", "matrix": [4, 10], "x": 11.5, "y": 4 }
-            ]
-        },
-        "LAYOUT_60_hhkb": {
-            "layout": [
-                { "label": "0,0", "matrix": [0, 0], "x": 0, "y": 0 },
-                { "label": "0,1", "matrix": [0, 1], "x": 1, "y": 0 },
-                { "label": "0,2", "matrix": [0, 2], "x": 2, "y": 0 },
-                { "label": "0,3", "matrix": [0, 3], "x": 3, "y": 0 },
-                { "label": "0,4", "matrix": [0, 4], "x": 4, "y": 0 },
-                { "label": "0,5", "matrix": [0, 5], "x": 5, "y": 0 },
-                { "label": "0,6", "matrix": [0, 6], "x": 6, "y": 0 },
-                { "label": "0,7", "matrix": [0, 7], "x": 7, "y": 0 },
-                { "label": "0,8", "matrix": [0, 8], "x": 8, "y": 0 },
-                { "label": "0,9", "matrix": [0, 9], "x": 9, "y": 0 },
-                { "label": "0,10", "matrix": [0, 10], "x": 10, "y": 0 },
-                { "label": "0,11", "matrix": [0, 11], "x": 11, "y": 0 },
-                { "label": "0,12", "matrix": [0, 12], "x": 12, "y": 0 },
-                { "label": "0,13", "matrix": [0, 13], "x": 13, "y": 0 },
-                { "label": "0,14", "matrix": [0, 14], "x": 14, "y": 0 },
-                { "label": "1,0", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
-                { "label": "1,1", "matrix": [1, 1], "x": 1.5, "y": 1 },
-                { "label": "1,2", "matrix": [1, 2], "x": 2.5, "y": 1 },
-                { "label": "1,3", "matrix": [1, 3], "x": 3.5, "y": 1 },
-                { "label": "1,4", "matrix": [1, 4], "x": 4.5, "y": 1 },
-                { "label": "1,5", "matrix": [1, 5], "x": 5.5, "y": 1 },
-                { "label": "1,6", "matrix": [1, 6], "x": 6.5, "y": 1 },
-                { "label": "1,7", "matrix": [1, 7], "x": 7.5, "y": 1 },
-                { "label": "1,8", "matrix": [1, 8], "x": 8.5, "y": 1 },
-                { "label": "1,9", "matrix": [1, 9], "x": 9.5, "y": 1 },
-                { "label": "1,10", "matrix": [1, 10], "x": 10.5, "y": 1 },
-                { "label": "1,11", "matrix": [1, 11], "x": 11.5, "y": 1 },
-                { "label": "1,12", "matrix": [1, 12], "x": 12.5, "y": 1 },
-                { "label": "1,13", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 },
-                { "label": "2,0", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
-                { "label": "2,1", "matrix": [2, 1], "x": 1.75, "y": 2 },
-                { "label": "2,2", "matrix": [2, 2], "x": 2.75, "y": 2 },
-                { "label": "2,3", "matrix": [2, 3], "x": 3.75, "y": 2 },
-                { "label": "2,4", "matrix": [2, 4], "x": 4.75, "y": 2 },
-                { "label": "2,5", "matrix": [2, 5], "x": 5.75, "y": 2 },
-                { "label": "2,6", "matrix": [2, 6], "x": 6.75, "y": 2 },
-                { "label": "2,7", "matrix": [2, 7], "x": 7.75, "y": 2 },
-                { "label": "2,8", "matrix": [2, 8], "x": 8.75, "y": 2 },
-                { "label": "2,9", "matrix": [2, 9], "x": 9.75, "y": 2 },
-                { "label": "2,10", "matrix": [2, 10], "x": 10.75, "y": 2 },
-                { "label": "2,11", "matrix": [2, 11], "x": 11.75, "y": 2 },
-                { "label": "2,13", "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2 },
-                { "label": "3,0", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
-                { "label": "3,2", "matrix": [3, 2], "x": 2.25, "y": 3 },
-                { "label": "3,3", "matrix": [3, 3], "x": 3.25, "y": 3 },
-                { "label": "3,4", "matrix": [3, 4], "x": 4.25, "y": 3 },
-                { "label": "3,5", "matrix": [3, 5], "x": 5.25, "y": 3 },
-                { "label": "3,6", "matrix": [3, 6], "x": 6.25, "y": 3 },
-                { "label": "3,7", "matrix": [3, 7], "x": 7.25, "y": 3 },
-                { "label": "3,8", "matrix": [3, 8], "x": 8.25, "y": 3 },
-                { "label": "3,9", "matrix": [3, 9], "x": 9.25, "y": 3 },
-                { "label": "3,10", "matrix": [3, 10], "x": 10.25, "y": 3 },
-                { "label": "3,11", "matrix": [3, 11], "x": 11.25, "y": 3 },
-                { "label": "3,13", "matrix": [3, 13], "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "3,14", "matrix": [3, 14], "x": 14, "y": 3 },
-                { "label": "4,1", "matrix": [4, 1], "x": 1.5, "y": 4 },
-                { "label": "4,2", "matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4 },
-                { "label": "4,6", "matrix": [4, 6], "w": 6, "x": 4, "y": 4 },
-                { "label": "4,9", "matrix": [4, 9], "w": 1.5, "x": 10, "y": 4 },
-                { "label": "4,10", "matrix": [4, 10], "x": 11.5, "y": 4 }
-            ]
-        }
-    }
-}

keyboards/cipulot/ec_prox/ansi_iso/keymaps/60_hhkb/keymap.c

@@ -1,48 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_60_hhkb(
-        KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,   KC_5,    KC_6,   KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSLS,  KC_GRV,
-        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,   KC_T,    KC_Y,   KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_DEL,
-        KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,   KC_G,    KC_H,   KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENTER,
-        KC_LSFT,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,   KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   MO(1),
-                  KC_LGUI,  KC_LALT,                             KC_SPC,                               KC_RALT,  KC_RGUI),
-
-    [1] = LAYOUT_60_hhkb(
-        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,      KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_INS,  KC_DEL,
-        KC_CAPS,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_PSCR,  KC_SCRL,  KC_PAUSE,  KC_UP,    _______,  KC_BSPC,
-        _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  S(KC_8),  KC_SLSH,    KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RIGHT,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  S(KC_EQL),  KC_MINS,  KC_END,   KC_PGDN,  KC_DOWN,  _______,   _______,
-                  _______,  _______,                                _______,                                  _______,  MO(2)),
-
-    [2] = LAYOUT_60_hhkb(
-        RGB_TOG,  RGB_VAD,  RGB_VAI,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  QK_BOOT,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______),
-    [3] = LAYOUT_60_hhkb(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______)
-    // clang-format on
-};

keyboards/cipulot/ec_prox/ansi_iso/keymaps/default/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_all(
-        KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,   KC_5,    KC_6,   KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSLS,   KC_GRV,
-        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,   KC_T,    KC_Y,   KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_DEL,
-        KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,   KC_G,    KC_H,   KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_NUHS,  KC_ENTER,
-        KC_LSFT,  KC_BSLS,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,   KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,   KC_RSFT,  MO(1),
-                  KC_LGUI,  KC_LALT,                             KC_SPC,                               KC_RALT,  KC_RGUI),
-
-    [1] = LAYOUT_all(
-        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,      KC_F8,    KC_F9,    KC_F10,    KC_F11,    KC_F12,   KC_INS,  KC_DEL,
-        KC_CAPS,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_PSCR,  KC_SCRL,  KC_PAUSE,  KC_UP,     _______,  KC_BSPC,
-        _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  S(KC_8),  KC_SLSH,    KC_HOME,  KC_PGUP,  KC_LEFT,   KC_RIGHT,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  S(KC_EQL),  KC_MINS,  KC_END,   KC_PGDN,   KC_DOWN,   _______,  _______,
-                  _______,  _______,                                _______,                                  _______,   _______),
-
-    [2] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______),
-
-    [3] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______)
-    // clang-format on
-};

keyboards/cipulot/ec_prox/ansi_iso/keymaps/via/config.h

@@ -1,20 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// This is the size of the EEPROM for the custom VIA-specific data
-#define EECONFIG_USER_DATA_SIZE 4

keyboards/cipulot/ec_prox/ansi_iso/keymaps/via/keymap.c

@@ -1,49 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    // clang-format off
-    [0] = LAYOUT_all(
-        KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,   KC_5,    KC_6,   KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSLS,   KC_GRV,
-        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,   KC_T,    KC_Y,   KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_DEL,
-        KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,   KC_G,    KC_H,   KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_NUHS,  KC_ENTER,
-        KC_LSFT,  KC_BSLS,  KC_Z,     KC_X,     KC_C,   KC_V,    KC_B,   KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,   KC_RSFT,  MO(1),
-                  KC_LGUI,  KC_LALT,                             KC_SPC,                               KC_RALT,  KC_RGUI),
-
-    [1] = LAYOUT_all(
-        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,      KC_F8,    KC_F9,    KC_F10,    KC_F11,    KC_F12,   KC_INS,  KC_DEL,
-        KC_CAPS,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    KC_PSCR,  KC_SCRL,  KC_PAUSE,  KC_UP,     _______,  KC_BSPC,
-        _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  S(KC_8),  KC_SLSH,    KC_HOME,  KC_PGUP,  KC_LEFT,   KC_RIGHT,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  S(KC_EQL),  KC_MINS,  KC_END,   KC_PGDN,   KC_DOWN,   _______,  _______,
-                  _______,  _______,                                _______,                                  _______,   _______),
-
-    [2] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______),
-
-    [3] = LAYOUT_all(
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-                  _______,  _______,                                _______,                                _______,  _______)
-    // clang-format on
-};

keyboards/cipulot/ec_prox/ansi_iso/keymaps/via/rules.mk

@@ -1,3 +0,0 @@
-VIA_ENABLE = yes
-
-SRC += via_apc.c

keyboards/cipulot/ec_prox/ansi_iso/keymaps/via/via_apc.c

@@ -1,156 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "action.h"
-#include "via.h"
-
-void apc_init_thresholds(void);
-void apc_set_threshold(bool is_for_actuation);
-
-// Declaring an _apc_config_t struct that will store our data
-typedef struct _apc_config_t {
-    uint16_t actuation_threshold;
-    uint16_t release_threshold;
-} apc_config;
-
-// Check if the size of the reserved persistent memory is the same as the size of struct apc_config
-_Static_assert(sizeof(apc_config) == EECONFIG_USER_DATA_SIZE, "Mismatch in keyboard EECONFIG stored data");
-
-// Declaring a new variable apc of type apc_config
-apc_config apc;
-
-// Declaring enums for VIA config menu
-enum via_apc_enums {
-    // clang-format off
-    id_apc_actuation_threshold = 1,
-    id_apc_release_threshold = 2
-    // clang-format on
-};
-
-// Initializing persistent memory configuration: default values are declared and stored in PMEM
-void eeconfig_init_user(void) {
-    // Default values
-    apc.actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    apc.release_threshold   = DEFAULT_RELEASE_LEVEL;
-    // Write default value to EEPROM now
-    eeconfig_update_user_datablock(&apc);
-}
-
-// On Keyboard startup
-void keyboard_post_init_user(void) {
-    // Read custom menu variables from memory
-    eeconfig_read_user_datablock(&apc);
-    apc_init_thresholds();
-}
-
-// Handle the data received by the keyboard from the VIA menus
-void apc_config_set_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            apc.actuation_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(true);
-            break;
-        }
-        case id_apc_release_threshold: {
-            apc.release_threshold = value_data[1] | (value_data[0] << 8);
-            apc_set_threshold(false);
-            break;
-        }
-    }
-}
-
-// Handle the data sent by the keyboard to the VIA menus
-void apc_config_get_value(uint8_t *data) {
-    // data = [ value_id, value_data ]
-    uint8_t *value_id   = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-
-    switch (*value_id) {
-        case id_apc_actuation_threshold: {
-            value_data[0] = apc.actuation_threshold >> 8;
-            value_data[1] = apc.actuation_threshold & 0xFF;
-            break;
-        }
-        case id_apc_release_threshold: {
-            value_data[0] = apc.release_threshold >> 8;
-            value_data[1] = apc.release_threshold & 0xFF;
-            break;
-        }
-    }
-}
-
-// Save the data to persistent memory after changes are made
-void apc_config_save(void) {
-    eeconfig_update_user_datablock(&apc);
-}
-
-void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
-    // data = [ command_id, channel_id, value_id, value_data ]
-    uint8_t *command_id        = &(data[0]);
-    uint8_t *channel_id        = &(data[1]);
-    uint8_t *value_id_and_data = &(data[2]);
-
-    if (*channel_id == id_custom_channel) {
-        switch (*command_id) {
-            case id_custom_set_value: {
-                apc_config_set_value(value_id_and_data);
-                break;
-            }
-            case id_custom_get_value: {
-                apc_config_get_value(value_id_and_data);
-                break;
-            }
-            case id_custom_save: {
-                apc_config_save();
-                break;
-            }
-            default: {
-                // Unhandled message.
-                *command_id = id_unhandled;
-                break;
-            }
-        }
-        return;
-    }
-
-    *command_id = id_unhandled;
-}
-
-// Initialize the thresholds
-void apc_init_thresholds(void) {
-    ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-    ecsm_config.ecsm_release_threshold   = apc.release_threshold;
-
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}
-
-// Set the thresholds
-void apc_set_threshold(bool is_for_actuation) {
-    if (is_for_actuation) {
-        ecsm_config.ecsm_actuation_threshold = apc.actuation_threshold;
-
-    } else {
-        ecsm_config.ecsm_release_threshold = apc.release_threshold;
-    }
-    // Update the ecsm_config
-    ecsm_update(&ecsm_config);
-}

keyboards/cipulot/ec_prox/ansi_iso/matrix.c

@@ -1,44 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "matrix.h"
-
-/* matrix state(1:on, 0:off) */
-extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
-extern matrix_row_t matrix[MATRIX_ROWS];     // debounced values
-
-void matrix_init_custom(void) {
-    // Default values, overwritten by VIA if enabled later
-    ecsm_config.ecsm_actuation_threshold = DEFAULT_ACTUATION_LEVEL;
-    ecsm_config.ecsm_release_threshold   = DEFAULT_RELEASE_LEVEL;
-
-    ecsm_init(&ecsm_config);
-}
-
-bool matrix_scan_custom(matrix_row_t current_matrix[]) {
-    bool updated = ecsm_matrix_scan(current_matrix);
-
-// RAW matrix values on console
-#ifdef CONSOLE_ENABLE
-    static int cnt = 0;
-    if (cnt++ == 350) {
-        cnt = 0;
-        ecsm_print_matrix();
-    }
-#endif
-    return updated;
-}

keyboards/cipulot/ec_prox/ansi_iso/mcuconf.h

@@ -1,22 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include_next <mcuconf.h>
-
-#undef STM32_ADC_USE_ADC1
-#define STM32_ADC_USE_ADC1 TRUE

keyboards/cipulot/ec_prox/ansi_iso/readme.md

@@ -1,27 +0,0 @@
-# EC Pro X ANSI/ISO
-
-![EC Pro X ANSI/ISO PCB](https://i.imgur.com/TYhUrV0h.png)
-
-Open source replacement PCB kit for the HHKB Pro 2 and Pro 3 keyboards using the ANSI case.
-
-* Keyboard Maintainer: [cipulot](https://github.com/cipulot)
-* Hardware Supported: EC Pro X ANSI_ISO PCB
-* Hardware Availability: [EC Pro X](https://github.com/cipulot/EC-Pro-X)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make cipulot/ec_prox/ansi_iso:default
-
-Flashing example for this keyboard:
-
-    make cipulot/ec_prox/ansi_iso:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/cipulot/ec_prox/ansi_iso/rules.mk

@@ -1,3 +0,0 @@
-CUSTOM_MATRIX = lite
-QUANTUM_LIB_SRC += analog.c 
-SRC += matrix.c ec_switch_matrix.c

keyboards/cipulot/ec_prox/jis/config.h

@@ -1,45 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/* Custom matrix pins and port select array */
-#define MATRIX_ROW_PINS \
-    { A7, B0, A4, A5, A6 }
-#define MATRIX_COL_CHANNELS \
-    { 2, 1, 0, 3, 5, 7, 4, 6 }
-#define MUX_SEL_PINS \
-    { B4, B5, B6 }
-
-/* Hardware peripherals pins */
-#define APLEX_EN_PIN_0 B7
-#define APLEX_EN_PIN_1 B3
-#define DISCHARGE_PIN A2
-#define ANALOG_PORT A1
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define DEFAULT_ACTUATION_LEVEL 550
-#define DEFAULT_RELEASE_LEVEL 500
-
-#define DISCHARGE_TIME 10

keyboards/cipulot/ec_prox/jis/ec_switch_matrix.c

@@ -1,183 +0,0 @@
-/* Copyright 2023 Cipulot
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "ec_switch_matrix.h"
-#include "analog.h"
-#include "atomic_util.h"
-#include "print.h"
-#include "wait.h"
-
-/* Pin and port array */
-const uint32_t row_pins[]     = MATRIX_ROW_PINS;
-const uint8_t  col_channels[] = MATRIX_COL_CHANNELS;
-const uint32_t mux_sel_pins[] = MUX_SEL_PINS;
-
-static ecsm_config_t config;
-static uint16_t      ecsm_sw_value[MATRIX_ROWS][MATRIX_COLS];
-
-static adc_mux adcMux;
-
-static inline void discharge_capacitor(void) {
-    writePinLow(DISCHARGE_PIN);
-}
-static inline void charge_capacitor(uint8_t row) {
-    writePinHigh(DISCHARGE_PIN);
-    writePinHigh(row_pins[row]);
-}
-
-static inline void init_mux_sel(void) {
-    for (int idx = 0; idx < 3; idx++) {
-        setPinOutput(mux_sel_pins[idx]);
-    }
-}
-
-static inline void select_mux(uint8_t col) {
-    uint8_t ch = col_channels[col];
-    writePin(mux_sel_pins[0], ch & 1);
-    writePin(mux_sel_pins[1], ch & 2);
-    writePin(mux_sel_pins[2], ch & 4);
-}
-
-static inline void init_row(void) {
-    for (int idx = 0; idx < MATRIX_ROWS; idx++) {
-        setPinOutput(row_pins[idx]);
-        writePinLow(row_pins[idx]);
-    }
-}
-
-/* Initialize the peripherals pins */
-int ecsm_init(ecsm_config_t const* const ecsm_config) {
-    // Initialize config
-    config = *ecsm_config;
-
-    palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
-    adcMux = pinToMux(ANALOG_PORT);
-
-    //Dummy call to make sure that adcStart() has been called in the appropriate state
-    adc_read(adcMux);
-
-    // Initialize discharge pin as discharge mode
-    writePinLow(DISCHARGE_PIN);
-    setPinOutputOpenDrain(DISCHARGE_PIN);
-
-    // Initialize drive lines
-    init_row();
-
-    // Initialize multiplexer select pin
-    init_mux_sel();
-
-    // Enable AMUX
-    setPinOutput(APLEX_EN_PIN_0);
-    writePinLow(APLEX_EN_PIN_0);
-    setPinOutput(APLEX_EN_PIN_1);
-    writePinLow(APLEX_EN_PIN_1);
-
-    return 0;
-}
-
-int ecsm_update(ecsm_config_t const* const ecsm_config) {
-    // Save config
-    config = *ecsm_config;
-    return 0;
-}
-
-// Read the capacitive sensor value
-uint16_t ecsm_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
-    uint16_t sw_value = 0;
-
-    // Select the multiplexer
-    if (channel == 0) {
-        writePinHigh(APLEX_EN_PIN_0);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_0);
-    } else {
-        writePinHigh(APLEX_EN_PIN_1);
-        select_mux(col);
-        writePinLow(APLEX_EN_PIN_1);
-    }
-
-    // Set strobe pins to low state
-    writePinLow(row_pins[row]);
-    ATOMIC_BLOCK_FORCEON {
-        // Set the row pin to high state and have capacitor charge
-        charge_capacitor(row);
-        // Read the ADC value
-        sw_value = adc_read(adcMux);
-    }
-    // Discharge peak hold capacitor
-    discharge_capacitor();
-    // Waiting for the ghost capacitor to discharge fully
-    wait_us(DISCHARGE_TIME);
-
-    return sw_value;
-}
-
-// Update press/release state of key
-bool ecsm_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
-    bool current_state = (*current_row >> col) & 1;
-
-    // Press to release
-    if (current_state && sw_value < config.ecsm_actuation_threshold) {
-        *current_row &= ~(1 << col);
-        return true;
-    }
-
-    // Release to press
-    if ((!current_state) && sw_value > config.ecsm_release_threshold) {
-        *current_row |= (1 << col);
-        return true;
-    }
-
-    return false;
-}
-
-// Scan key values and update matrix state
-bool ecsm_matrix_scan(matrix_row_t current_matrix[]) {
-    bool updated = false;
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_1);
-    for (int col = 0; col < sizeof(col_channels); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col] = ecsm_readkey_raw(0, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col, ecsm_sw_value[row][col]);
-        }
-    }
-
-    // Disable AMUX of channel 1
-    writePinHigh(APLEX_EN_PIN_0);
-    for (int col = 0; col < (sizeof(col_channels) - 2); col++) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            ecsm_sw_value[row][col + 8] = ecsm_readkey_raw(1, row, col);
-            updated |= ecsm_update_key(&current_matrix[row], row, col + 8, ecsm_sw_value[row][col + 8]);
-        }
-    }
-    return updated;
-}
-
-// Debug print key values
-void ecsm_print_matrix(void) {
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            uprintf("%4d", ecsm_sw_value[row][col]);
-            if (col < (MATRIX_COLS - 1)) {
-                print(",");
-            }
-        }
-        print("\n");
-    }
-    print("\n");
-}