- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
* Define default HSV and speed for RGB matrix.
* Documentation for configuration values RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT and RGB_MATRIX_STARTUP_VAL.
* Document RGB_MATRIX_STARTUP_SPD.
* Preserve the ordering.
* Implement IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add configurable option IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add function get_ignore_mod_tap_interrupt iff the option is enabled
Unless IGNORE_MOD_TAP_INTERRUPT_PER_KEY is defined, this patch does not affect the resulting binary.
* Add documentation for IGNORE_MOD_TAP_INTERRUPT_PER_KEY
* Left-right gradient.
* Update the comment to match the new functionality.
* CPP does integer division so this round is not necessary.
* The x-range is actually 224, update comment and use bit-shifting again.
* Update docs with gradient left-right effect and associated "DISABLE" option.
* add faq part
* add faq part
* add faq part
* add faq part
* add faq part
* update for link
* update for a punctuation
* update files based on comments
* restore removed git diff header
* correct pathname on git diff header
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update file based on comment
* update file based on comment
* update file based on comment
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: satt99 <39004890+satt99@users.noreply.github.com>
* add basic part
* update cli
* update cli
* correct links to ja document
* update files based on comments
* update for a postpositional particle
* update for a punctuation
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* fix instructions for oneshot layer handling on key release
* use ONESHOT_OTHER_KEY_PRESSED instead of ONESHOT_PRESSED
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Improve support and docs for ADC driver
* Comment ADC channels
* Move to Makers and Modders section, and fix usage instructions
* Flesh out intro
* Superscript 328P note
* Fix pin_to_mux LUT
* Support USB64/1287 as well
* analogReadPin() defaults to 0V mux on invalid pin
* Update pinToMux() function documentation
* Dot
* Accept (some of) the `qmk cformat` changes
* Do clang-format properly
* More wording tweaks
* Link to encoder docs
* Update getting_started_make_guide.md
clarifying that NO_PRINT and USER_PRINT should not be used at the same time.
* Update docs/getting_started_make_guide.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add "Resynchronizing an Out-of-Sync Git Branch" doc
* Update (Git) Best Practices doc title and filename
* Rename Branch Resync doc
* fork Best Practices doc into multiple files
* Add the doc list to Git Best Practices doc
* Update sidebar
* Update internal references
* Update sidebar - add subsection
* Update Your Fork's Master page title
* title case on Git Best Practices main doc
* ... and in the Resynchronizing a Branch doc
* Please read Part 1
I worked really hard on this, okay?
* Please use branches, too.
* suggestions by mtei
* change note about adding multiple files
* note that the name given the remote repo is arbitrary
* suggestions by fauxpark
* Git Best Practices -> Best Git Practices
Reads more naturally.
* rephrase hint block regarding remote name
* rework the resynchronization instructions per mtei
* use hint boxes for reference to Part 1 doc
I may be addicted to hint boxes. I'm sorry fauxpark. 😢
* add some clarity about the upstream repo
* wordsmithing per mtei
* restyle the shell code blocks
Makes them more consistent to the other docs in this section.
* for initial commit
* for initial commit
* for initial commit
* Update led_update_kb example (#7451)
* Update led_update_kb example
* Update comment to explain pin behavior
* wordsmith
* wordsmithing 2
* Remove CR when computing BOOTLOADER_SIZE. (#7453)
* Set up language fallback for docs, and update translation guidelines (#7403)
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* [Keyboard] Added Cans12er keyboard (#7455)
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template
* Update atmega32a readme files to match template - fixes
* Apply suggestions from code review
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Add shift-to-invert to remaining directional RGB_* keycode pairs
RGB_MODE_FORWARD / RGB_MODE_REVERSE invert their functions when shift is held.
This change adds the same capabilities to the remaining directional RGB_*
keycode pairs. This improves consistency and provides full RGB control in a
keymap containing only one keycode from each pair.
* remove redundant variable
* fix typo
* Fix more typos
Flyspell is on now I swear!
* Install bootloadHid on macos
* Install bootloadHid on windows
* Highlight bootloadHID is now installed in docs
* Update udev rules for bootloadHID
* Install bootloadHid on some distros
* fix caterina udev filename
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* f
* Allow overriding of all functions in wonderland.c
- needed for custom LED functions in keymap.c
* Example of layer indication via LEDs
optimize
* Use newer led_update_kb and led_update_user hooks
- these allow overriding without use of __attribute((weak))__
* Update led documentation a bit
- clarify some of the wording around how to use led_update_user
* Update led_update_user example
* Update audio example to be complete
* trailing spaces smh
* spaces
* spaces
* smh
* Less code is good
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update japanese translation of newbs.md and related documents.
* document link id change
* add `ja/` in each link
`[xxx](yyy.md)` --> `[xxx](ja/yyy.md)`
* copy docs/ja/_summary.md from umi-umi's #7248 and fix it
* Initial commit
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Translate newbs_learn_more_resources.md
* Clear up some phrases
* Add newbs_building_firmware.md, fix spelling
* Add newbs_building_firmware.md, fix spelling
* Update docs/de/_summary.md
Danke
* Update docs/de/README.md
* Update docs/de/_summary.md
Ich wollte es kuerzer halten damit die Navigationsleiste nicht zu breit wird, aber das ist halt die deutsche Sprache :)
* Update docs/de/newbs.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Apply suggestions from code review
* Add translation of newbs_flashing.md
* Apply suggestions from code review
Danke
* Add translation of Zadig-guide
* Translate newbs_testing_debugging.md to german
Co-Authored-By: Max Rumpf <max.rumpf1998@gmail.com>
Co-Authored-By: geisterfurz007 <geisterfurz007@users.noreply.github.com>
A new CLI subcommand was added, flash, which behaves very similar to the already present compile CLI comamnd, but with the added ability to target a bootloader. The command is used like so: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename].
A -kb <keyboard> and -km <keymap> is expected, or a configurator export JSON filename. A bootloader can be specified using -bl <target>, and if left unspecified, the target is assumed to be :flash. -bl can be used to list the available bootloaders.
If -km <keymap> is provided, but no -kb <keyboard>, then a message is printed suggesting the user to run qmk list_keyboards.
* Error out when Solenid pin is not defined
Instead of defaulting to a (literally) random pin, error out instead. Because this pin may be used, or because that pin may not be exposed, or may not exist.
* Remove 'SOLENOID_ACTIVE' setting since it's not used
* Update documentation
* Add initial pass at KLE convert
* Add cli log on convert
* Move kle2xy, add absolute filepath arg support
* Add overwrite flag, and context sensitive conversion
* Update docs/cli.md
* Fix converter.py typo
* Add convert unit test
* Rename to kle2qmk
* Rename subcommand
* Rename subcommand to kle2json
* Change tests to cover rename
* Rename in __init__.py
* Update CLI docs with new subcommand name
* Fix from suggestions in PR #6898
* Help with cases of case sensitivity
* Update cli.md
* Use angle brackets to indicate required option
* Make the output text more accurate
* Fix unicode in comments
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove separate RGBW implementation for a unified function
* Set White to 0 in RGBW LEDs
This is just to get this working, later, proper brightness can be handled elsewhere.
* Use us instead of nanoseconds(?) since it renders correctly on web
* Remove RGBW function from arm/ws2812.h
* Remove RGBW function from arm/ws2812.c
* Formatting changes
* Add doc info
* Tidy up compatible MCUs docs
* ARM chips should have USB
* 32KB soft lower limit applies to ARM as well
* NXP is the manufacturer name, not Kinetis
* Units
* Initial ARM bitbang ws2812 driver
* Unify chibios platform to run rgblight_task
* Remove 'avr only' comments from ws2812 docs
* Remove 'avr only' comments from ws2812 docs
* Unify chibios platform to run rgblight_task - review comments
* Remove debug flags from keymap
* Add comments from review
* Add defines for STM32L0XX
* Attempt to get arm ws2812 working on multiple gcc versions
* Convert Dynamic Macro to a Core Feature
This imports the code from Dynamic Macro into the core code, and handles it, as such.
This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.
Additionally, this reorganizes the documentation to better reflect the changes.
Also, it adds user hooks to the feature so users can customize the existing functionality.
Based heavily on and closes#2976
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Cleanup based on feedback
* Add short-form keycodes and document them
- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md
* Add Dynamic Macros section and keycodes to docs/keycodes.md
* Make anti-nesting optional
* Add documentation for DYNAMIC_MACRO_NO_NESTING option
* Fix Merge artifacts
* Fix formatting typo in docs
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Remove DYNAMIC_MACRO_RANGE as it's not needed
* Fix includes and layer var type
* Fix edge case when using One Shot Layer with Auto Shift, and it not triggering the cleanup
* Remove junk code (no longer used)
* Replace `(un)register_code` calls with `tap_code` where appropriate
* Fixed up Switch check to be more readable (less verbose)
* Simplified modifier check (if it comes back non-zero, there are mods)
* Add additional function calls for autoshift settings
* Made all variables static, since there are function calls to get their status
* Fixed up documentation
* Re-add special characters that were missed
* formatting pass
* Translated faq.md and added all other files (copy from English)
* Translated driver_installation_zadig.md in French
* Translated faq_build.md in French
* Translated faq_debug in French
* Translateed faq_general.md in French
* Translated first part of faq_keymap.md
* Renamed docs/fr-FR folder to docs/fr-fr
* Finished translation of faq_keymap.md
* Update faq_build.md
* Review (#3)
* Review
* Update docs/fr-fr/faq_keymap.md
* Update docs/fr-fr/faq_debug.md
* Fix some PR comments
Co-Authored-By: Noan Mousy <4sstylz@protonmail.ch>
Co-Authored-By: Wermeille Bastien <bastien.wermeille@gmail.com>
* Initial migration of software PWM backlight
* First pass at backlight driver docs
* Correct driver name in docs
* Run backlight_task when using BACKLIGHT_PINS
* Resolve backlight docs TODOs
* add all translation docs to translating.md
* Adding Spanish folder and README.md
* Adding Spanish to the langs file
* Adding a Spanish summary file
* Small corrections on the Spanish README file
* Adding Spanish newbs.md
* Translate some newbs documentation
* Adding the translated newbs getting started file
* Adding the building firmware file
* Adding a translated building firmware with configurator file
* Adding the flashing guide
* Adding the newbs_testing_debugging file
* Apply suggestions from code review
* QMK Configurator -> Configurador QMK
Co-Authored-By: Karey Higuera <karey.higuera@gmail.com>
* Add he-IL (Hebrew) Translation
* Add Hebrew to SUMMARY
* Try RTL
* Add RTL text
* Lowercase folder names
* Update lowercase folder in Summary
* Adding getting_started_introduction.md
* Add Proton C Conversion translation
* Add Becoming a QMK Collaborator Translation
* Add FAQ translation
* Add Hardware translation
* Documentation Best Practices translation
* Add FAQ General translation
* Align docs RTL
* Add Becoming a QMK Collaborator Translation
* Translate Getting Started - Getting Help
* Translate Getting Started With Github
* Code sections should be alligned to the left
* Code sections should be alligned to the left
* Code sections should be alligned to the left
* Revert "Code sections should be alligned to the left"
This reverts commit d0c46e90c4.
* Add Markdown aligned to the left
* Update quantum_keycodes.md
* Update proton_c_conversion.md
* Translate Newbs Learn More Resourses
* Fix dunder names being accidentally bolded
* Update docs/coding_conventions_python.md
Co-Author: fauxpark <fauxpark@gmail.com>
* Change all the "names to avoid" to use backticks
* Remove obsolete note about media keys in MacOS
KC_MNXT and KC_MPRV work fine on MacOS, so this note is obsolete.
* Document behaviour of MEDIA_FAST_FORWARD/MEDIA_REWIND codes on MacOS
* Small typo fix, and make OS-dependent keycode claim less absolute
* Update docs/keycodes_basic.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Translated "CLI" documentation to German
> * Weise den User an, die Umgebungs-Variable `QMK_HOME` zu setzen, um die Firmware-Quelle anders einzustellen als `~/qmk_firmware`.
- I wasn't quite sure with this translation, as I didn't understand the context in the original English docs.
- The link to the CLI Configuration page is currently not working, due to it being missing in German.
* Update docs/de/cli.md - typo
* Update docs/de/cli.md - added Installation option into documentation
* Update docs/de/cli.md - changed article for CLI
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md de-anglicization
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md Synonym
* Update docs/de/cli.md Added Installation option
* Cleaned up installation option duplicate
Co-Authored-By: kuchosauronad0 <22005492+kuchosauronad0@users.noreply.github.com>
* Update Newbs Flashing guide
For the newbs that want to start flashing
* Update flashing docs
* Misc flashing
* Attempt at flashing in french
Lets hope I didn't butcher this too badly with machine transations
* Update docs/feature_userspace.md
* Apply language suggestions from code review
* Apply suggestions from code review
* Apply additional fr lang suggestions from code review
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: Noan Mousy <4sstylz@protonmail.ch>
Co-Authored-By: Xavier Hahn <xavier.hahn@gmail.com>
Co-Authored-By: Vincent LE GOFF <vince.legoff@gmail.com>
* started Russian translation
* added translation of some newbs docs
* do not translate firmware word in name and transliterate names keeping original ones in brackets
* addressed review comments
* addressed more review comments
Co-Authored-By: nabokovas <bbkv@bk.ru>
* Reorganised Hand Wire Guide
Added some images and put the "Matrix" section in a hidden <details> section
* Actually adding images this time
removed .jpg from .gitignore
* Hand wire guide updated
Incomplete, but started making the guide more general. Will continue to add images (in imgur as requested)
* Removed some more images from gitignore
* testing image changes (temporary)
* Update hand_wire.md
* added techniques table
* Tweaking the table
* Finished soldering guide
* Fixed some links, change image scaling
* More of the same
* resizing images
* updated images
* Update hand_wire.md
* Resizing images
* Update hand_wire.md
* Update hand_wire.md
* Create ribbon_cable.jpg
* Minor updates to links
* Updated firmware and flashing guidelines
* Updated images to imgur links and re-added images to gitignore
* Implemented requested changes. Improved wording
* Added handwire helpers info and split KB info
* Update hand_wire.md
* Removed "the" from "the QMK toolbox"
* Fixed handwire helper table and image size
* Fixed a heading
The subcommand functions' name follows the Python convention of using
snake case, but looks odd on the command line.
Fix it by converting underscores to dashes, eg.: list_keyboards ->
list-keyboards.
While this was historically a valid possibility, nowadays, it reads
kinda weird, and the [Oxford Dictionaries Online suggests to avoid it](https://english.stackexchange.com/a/56010).
Thus, I removed it everywhere I found it.
* Add a short explanation to the troubleshooting section
While translating I noticed that the troubleshooting section could use a
little bit more explanation. @Yanfali was so kind to chime in on this on
discord and explained that this was ment for people who accidently
forget to put their board in bootloader mode, so I added this as a
possible common mistake.
Also fixed the spelling of Msys2 to MSYS2 and Halfkay to HalfKay as
these are the official spellings they use themselves.
* Update driver_installation_zadig.md
* Update driver_installation_zadig.md
English is hard.
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Translated breaking_changes.md in French
* Translated ChangeLog/20190830.md to French
* Update docs/fr-FR/breaking_changes.md
Co-Authored-By: Max Rumpf <max.rumpf1998@gmail.com>
* Fix comments from @zekth
Co-Authored-By: Vincent LE GOFF <g_n_s@hotmail.fr>
* Adds the files that will be translated
* Start translate cli_configuration.md in French
* Translated cli.md in French
* Translated getting_started_getting_help.md in French
* /getting_started_github.md
* Translated first part of contributing.md in French
* Finish translation of contributing.md
* Translated the getting_started_introduction.md in French
* Corrected issues from @zekth review
Co-Authored-By: Vincent LE GOFF <g_n_s@hotmail.fr>
* CLI command to serve docs locally
* Document it
* Default port
* Use `with` and subclass `SimpleHTTPRequestHandler` to set working dir
* Apply suggestions from code review
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Update docs/cli.md
* Translated _summary.md + newbs.md
* Translated news_best_practices.md in French
* Translated newbs_building_firmware_configurator.md in French
* Translated the file newbs_building_firmware.md in French
* Translated page newbs_flashing.md in French
* Translated the page newbs_getting_started.md in French
* Translated the page newbs_learn_more_resources.md in French
* Translated the page newbs_testing_debugging.md in French
* Change translation of split from 'séparé' to 'scindé'
* Adding the lang file for gitbook and some others tranme other translation
* Correcting typos after Gimly's review
* Some others sections on the summary
* Fix first comments from @zekth
* Fix some issues from @4sStylZ
* Fix other issues from @4sStylZ
* Fix weird phrase
* Replaced all uses of 'téléverser' by 'flash'
* Replaced all planches by board
* Fix other PR comments
* Fix comment
* [Docs] Add AVR and ARM examples to GPIO Commands
Add examples for reference for people not as well versed in microcontroller coding, such as myself.
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Add an important note about modifying user code
* Update docs/contributing.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
`list_keyboards` replicates the `make list-keyboards` by globbing for all paths
that include `rules.mk` and then removing the paths that include `keymaps`.
This basis of this cli command could be reused in the future as a util, but is
not done so here since this would be the only place that would use it currently
Resolves#6911
* Initial stab at some fake dfu-util-split-left behaviour
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Clang format fixes
* Fake eeprom init for both left and right hand
* Rework how bin/qmk handles subcommands
* qmk config wip
* Code to show all configs
* Fully working `qmk config` command
* Mark some CLI arguments so they don't pollute the config file
* Fleshed out config support, nicer subcommand support
* sync with installable cli
* pyformat
* Add a test for subcommand_modules
* Documentation for the `qmk config` command
* split config_token on space so qmk config is more predictable
* Rework how subcommands are imported
* Document `arg_only`
* Document deleting from CLI
* Document how multiple operations work
* Add cli config to the doc index
* Add tests for the cli commands
* Make running the tests more reliable
* Be more selective about building all default keymaps
* Update new-keymap to fit the new subcommand style
* Add documentation about writing CLI scripts
* Document new-keyboard
* Update docs/cli_configuration.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Address yan's comments.
* Apply suggestions from code review
suggestions from @noahfrederick
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Apply suggestions from code review
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Remove pip3 from the test runner
* made tapdance dual_role general
* updated original dual_role functionality
* added toggling layer example
* Fix dual role and add alias
* Update docs about new layer tap dances
* Fix up based on feedback
* Add reset instructions for boards that use Command to the Zadig driver installation guide
* -> → →
* Apply suggestions from code review
Replace shorthand keycode names with full names
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* provide means to turn on RTP mode and set the amplitude
* new keycode HPT_CONT to turn RTP off/on
* introduce new keycodes HPT_CONI, and HPT_COND for Haptic Continuous Increase and Decrease
* support for continuous mode amplitude increase and decrease
* code cleanup
* update docs to reference new keycodes and functionality
* don't touch the keymaps
* add function prototypes
* add proper guards
* cleanup guards
* remove extra reserved
* Add Dip Switches as a core feature
* Add documentation for Dip Switch feature
* Update Preonic Rev3 to use new feature and remove custom matrix
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Remove custom matrix line completely
Rather than just disabling it
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* DIP changes
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use better check for DIP Switch configuration
* Add to show features
* Add bitmask callback for dip switch
* Fix OLKB Boards dip switch config
* Update docs to include bitmask example
* Fix comments/documentation
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix issues with docs and use example from @tuzonghua
* Fix wording
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix example to use proper formatting
Bad, BAAAAAAD drashna!!!
* Handle dip switch initialization better
* Update atreus to current code conventions - add multi revision instead of defines
* Remove config.h duplication from user keymaps
* Add breaking change log
* Add missing pragma once
* Branch point for 2019 Aug 30 Breaking Change
* LUFA USB descriptor cleanup (#4871)
* Fix indentation
* Fix braces
* Expand descriptor headers
* Align descriptor elements
* Nicer formatting
* Tidy up preprocessor statements
* Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418
* Tidy up comments
* Tweak ordering of HID report elements (no functional changes)
* We don't need all of these newlines
* Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense
* Ask nicely
* Add some more comments
* Change indentation back to 4 spaces
* Add changelog entry
* Language Keymap extras backport from ZSA fork (#6198)
* Swedish extra keymap refactor
* Fix swedish $ sign definition (#81)
* Fix br abnt2 keymap compilation error
* Add PR changelog doc
* Update PR6198.md
* Enforce clang-format (#6293)
* Enforce clang-format on commit for core files
* forgot about tests
* Migrate ACTION_LAYER_MOMENTARYs to MO() (#5176)
* Migrate ACTION_LAYER_MOMENTARYs to MO()
* Add changelog entry
* Update docs/ChangeLog/20190830/PR5176.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Migrate ACTION_BACKLIGHT_* to BL_*
* Add changelog
* Update docs/ChangeLog/20190830/PR6299.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Fix indentation
* Fix braces
* Expand descriptor headers
* Align descriptor elements
* Nicer formatting
* Tidy up preprocessor statements
* Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418
* Tidy up comments
* Tweak ordering of HID report elements (no functional changes)
* We don't need all of these newlines
* Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense
* Ask nicely
* Add some more comments
* Change indentation back to 4 spaces
* Add changelog entry
* Add Zadig 101 to docs
* Add USBasp bootloader name
* Add links to the page
* Note the usual VIDs and PIDs for the bootloaders
* Add "List All Devices" note, just in case
* Talk about keyboard-specific bootloader procedures
* Send users to the new page in "Unknown Device for DFU Bootloader" section
* Halfkay bootloaders are also an exception here
* Update how_keyboards_work.md
bridged the gap between scancodes and keycodes, the doc didn't make the distinction and was ambiguous.
* Update docs/how_keyboards_work.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update docs/how_keyboards_work.md
fix typo
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Additional changes for Layer State typedef compatibility
* Replace biton32 with get_highest_layer in docs
* Change additional layer structure code
* Fix uGFX reference issue
* Remove dynamic_keymap check
* Where did all these extra spaces come from
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes
Key codes to swap and unswap the control and windows/cmd keys
* Fix issues with pull request #6110
Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end
* Move new keycodes to the end of the enum (#6110)
* add cases for swapped control and OS keys to mod_config (#6110)
* Add new keycodes to feature_bootmagic.md (#6110)
* Add R+L swap codes to keep in parity with AG_* codes
* Extend Magic range check to include new magic codes
* Update audio docs
* Combine 2 byte ranges into 1 word for EECONFG
Fix names for Keymap config EEPROM
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* Improve backlight PWM pin support
* I accidentally an equals sign
* Another typo
* Order by pin number
* Throw an error if backlight pin is C4 or C5 on 16/32U4
* Use else for clarity
* Minor alignment adjustments
* Add Sections and MO(layer)/TG(layer) Example
Major changes:
1. Added sub-section headings to the portion before the examples.
2. Added a new Example 6, that allows MO(layer) and TG(layer) functionality to be embedded within tap dance functions.
Minor Changes:
1. Edited some text to better fit with new sub-headings.
* Update feature_tap_dance.md
* Update feature_tap_dance.md
* Update IS_COMMAND definition in templates to use MOD_MASK_SHIFT
* Update IS_COMMAND in docs
* Update IS_COMMAND default definition in tmk_core
* Update table in Command docs based on suggestion
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove the need to set NUM_OF_ENCODERS
Instead, calculate the size of the array, and use that instead
* Add hack for split common support
* Remove NUM_OF_ENCODERS from keyboard config
Can be reverted, if needed
* Initial conversion of vagrant to use qmkfm/base_container
* Fix vagrant when using docker provider
* Workaround for VirtualBox VM restarts
* Generalise Vagrant docs slightly and add FAQ
* Script to generate keymap.c from JSON file.
* Support for keymap.json
* Add a warning about the keymap.c getting overwritten.
* Fix keymap generating
* Install the python deps
* Flesh out more of the python environment
* Remove defunct json2keymap
* Style everything with yapf
* Polish up python support
* Hide json keymap.c into the .build dir
* Polish up qmk-compile-json
* Make milc work with positional arguments
* Fix a couple small things
* Fix some errors and make the CLI more understandable
* Make the qmk wrapper more robust
* Add basic QMK Doctor
* Clean up docstrings and flesh them out as needed
* remove unused compile_firmware() function
* Hightlight that sudo may be needed
Also added "dfu-programmer: no device present" in so that anyone searching for that particular error can hopefully find the page.
* Use new style of indicating a warning
* Indicate that the FAQ should be read instead of blindly using sudo
* Clarify the rules.mk setup for Unicode
* code point
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Remove "your"
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Undo a line change
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* dot the comma
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Update docs/feature_unicode.md
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Fix breathing always on for soft PWM
* Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description
Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio
* Document BACKLIGHT_ON_STATE and its purpose
* Fix backlight breathing on C6
* Account for ATmega32A's single TIMSK register (MT40)
* Document hardware PWM on D4 for ATmega32A
* Add C6 and D4 to BACKLIGHT_PIN description
* modify oled_driver to support SH1106
also:
- improve mechanism to specify which OLED IC we use
- comment calc_bounds()
- give OLED_COLUMN_OFFSET a default value
- inline comment re: OLED MEMORY_MODE and SH1106
- update docs/feature_oled_driver.h for SH1106 support and related changes
- docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2)
- define out MEMORY_MODE when using SH1106 OLED driver
* document that SSD1306 128x64 on AVR works
Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842
* faq_general.md to Chinese
faq_general.md to Chinese
faq finished
* custom_quantum_functions.md to Chinese
custom_quantum_functions.md to Chinese
* custom_quantum_functions.md fix
custom_quantum_functions.md fix
* custom_quantum_functions.md fix translate
custom_quantum_functions.md fix translate
* !ver.English! _summary.md bug fix
_summary.md bug fix of English doc. add".md" behind "feature_combo"
* !ver.English! custom_quantum_functions.md fix#5869
custom_quantum_functions.md in English : delete redundant "is" . issue#5869
* !ver.English! how_keyboards_work.md link fix
change
https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input
to
https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input
"#Hexadecimal_code_input" not exist
* !English! how_keyboards_work.md add missing "t"
Tied to a specific OS a a time (need recompilation when changing OS);
change to
Tied to a specific OS at a time (need recompilation when changing OS);
* _summary.md improve translation
_summary.md improve translation
* reference_glossary.md into Chinese
reference_glossary.md into Chinese
术语表翻译，这个术语表英文版似乎不太全，应该补充英文版，并在中文版添加其他具有中国特色的术语。
I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies.
Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.
* translate docs into Mandarin Chinese
translate
faq_debug.md
into Chinese
* translate faq_build.md into Chinese
translate faq_build.md into Chinese
* faq_keymap.md to zh-cn
faq_keymap.md to zh-cn
* Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature.
* Tweaking my community keymap to work better with my rev 4 planck.
* Increase delay for Hold-Tap register for CAPSLOCK
Because it seems that the 80ms delay wasn't too much
* Screw it, make the caps delay a define and make it configurable
* add rgblight_set_effect_range()
* implement effect range
* Arrange the order of function list in rgblight.h .
* update docs/feature_rgblight.md
* fix RGBLIGHT_RAINBOW_SWIRL_RANGE default value
* add example code about Utility Functions
* add example code about direct operation functions
* When RGBLIGHT_SPLIT is defined, the following function has no meaning and is invalidated.
* rgblight_setrgb_master(r, g, b)
* rgblight_setrgb_slave(r, g, b)
* rgblight_sethsv_master(h, s, v)
* rgblight_sethsv_slave(h, s, v)
* add temporary test code for rgblight_set_effect_range
* fix rgblight_effect_knight() bug
* Test End. Revert "add temporary test code for rgblight_set_effect_range"
This reverts commit 5680cddd01.
* Added check for pressed to clear space cadet
* Found some docs to update
* Update docs/quantum_keycodes.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Changes from PR
* translate newbs.md into Madarin Chinese
translate newbs.md into Madarin Chinese
* translate docs into Mandarin Chinese
translate getting_started_github.md into Mandarin Chinese
* translate getting_started_getting_help.md into Mandarin Chinese
translate getting_started_getting_help.md into Mandarin Chinese
* contributing.md to Chinese
Personify QMK as a girl named Q酱 . It can make more developer read this document and contribute QMK.
* getting_started_introduction.md to Chinese
getting_started_introduction.md to Chinese
* faq.md to Chinese
faq.md to Chinese
* crlf2lf getting_started_introduction.md
ending line fix getting_started_introduction.md
* crlf2lf contributing.md
crlf2lf contributing.md
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Improve Animation docs with example
- example to reduce flash footprint of animations using RGBLIGHT_EFFECT_ defines
* Re-order the effects list
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Introduce line breaks
* Add title for animation speed section
* Organize Animation Defines Into Groups
* Use the RGB EFFECT recommended by mtei in docs
- has the most modes, and STATIC_LIGHT can't really be disabled.
* Use more accurate titles for effects and animation
- accidentally put a toggle in settings
* Initial conversion of the rgb_led struct
* Converting last keyboard & updating effects to take advantage of the new structure
* New struct should not be const
* Updated docs
* Changing define ___ for no led to NO_LED
* Missed converting some keymap usages of the old struct layout
The code as originally listed didn't work for me, but replacing `unregister_code16(LALT(KC_TAB));` with `unregister_code(KC_LALT);` fixes the problem and causes the macro to work as intended.
Thanks to folks on Discord for helping me figure this out.
* Expose unicode_saved_mods
* Add UNICODEMAP shift pair functionality and XS keycode
* Add XS to keycode reference documentation
* Pick pair index based on both Shift and Caps Lock state
* Add XS to Unicode feature docs
* Clean up process_unicode* headers
* Extract unicode_map index calculation into function
* Pick pair index as XOR rather than OR of Shift and Caps states
* unicode_input_start() has to be called before the unicode_map index is calculated
* Replace unicodemap_input_error() with more generic unicode_input_cancel()
* Replace register+tap+unregister with tap_code16(LCTL(LSFT(KC_U)))
* UNICODE_OSX_KEY → UNICODE_KEY_OSX, UNICODE_WINC_KEY → UNICODE_KEY_WINC
* Make keycode range checks more robust
* Fix keycode range checks for different input modes
* Add UNICODE_KEY_LNX, update docs
* QK_UNICODEMAP_SHIFT → QK_UNICODEMAP_PAIR
* XS → XP, update docs
* Tweak Unicode docs
* Use recently added MOD_MASK_SHIFT and IS_HOST_LED_ON helpers
* Update Unicode table in docs/keycodes.md
* Update Unicode docs per review comments
* Replace references to Mac OS X with macOS in Unicode docs
* As of v0.9.0, WinCompose supports all possible code points
* Expand descriptions in XP docs
* Update keycode table and cycling docs
* Further expand cycling docs
translate
newbs_getting_started.md
newbs_building_firmware.md
newbs_flashing.md
newbs_testing_debugging.md
newbs_best_practices.md
newbs_learn_more_resources.md
into Mandarin Chinese
* If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin()
* Change rgblight breathing table size to be easily selectable.
add RGBLIGHT_BREATHE_TABLE_SIZE macro for customize breathing effect.
