* Display logo for caps lock indication on crkbd using old OLED driver
* Add emacs read-only mode file variable to generated files
* use LTO_ENABLE instead of EXTRAFLAGS
This enables the same option, and disables action_macros, and action_functions, both of which seem to break when LTO is enabled. And this is a lot simpler to use.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
* [Keyboard] Change Corne RGB Matrix split handling
This uses the "is_master" detection to set the led matrix, rather than a define at compile time.
This means that the same hex can be used for both halves, not just one or the other. The caveat is that this costs ~240 bytes to do.
However, I feel that this is a good trade-off, not just lazy.
* Update documentation for RGB Matrix on the Corne
* rebaselined the whole fork and added cool matrix animations
* Updated dfu bootloader rules, oleds working on test map
* Moving test branch into main
moving my _test branch files into the main since the repo is now in the dev branch, don't see any reason to keep separate folders.
* Update keymap.c
Adding DOT to number layer
* added LED sleeping
* working on getting matrix rgb to sleep upon usb suspend
uploading to github for qmk staff help
* Added master sleep on usb suspend
Unfortunately the sleep function does not work on the slave side so will probably revert this change later
* bringing hhkb config up to current with other tominabox1 configs
* Update config.h
since master side is the only one that sleeps, going to disable this for now.
* testing oled stuff
* Update rules.mk
* tinkering with oled still
* Finally fixed custom image with corne doug
* Adding keymap to dimple instead of screwing up the upstream references.
* Changed oled image to peepo ggers
* working on oled sleep
* Update keymap.c
* fixes oled wake/sleep issues
* Adding 🅱️ and BEPIS macros
* Update .gitignore
* Cleaning up and improving documentation
* Update keymap.c
* Adding my minivan keymap
* Fixed error on keymap
* fixed OLEDs not turning on and moved tapping term to the keymap file
* Changed tapping term from 200 to 250
* Revised Fkey layers, arrows, question mark locations
* Update keymap.c
* tweaked tapping term and types on CRKBD, revised layout on HHKB
* Update keymap.c
* general code cleanup, keymap displays
* Set up userspace for common keymap elements
* tapping term stuff for shift
* testing
* Fixed new tapdance for accessing number and fkey layers
* Update tominabox1.h
* stuff
* fixing function calls for userspace
* cleaning up crkbd config and moving stuff to userspace
* finally fixed oled lightup issues
* cleaning up a few maps and rules
* Removing permissive hold and returning spacefn to all boards.
* Settting up wrapper keymaps for Dimple, Minivan, and Corne
Wrappers
* small tweaks
* Update wrappers.h
* finishing wrappers on Minivan and Dimple
* Revised tapping term definition
Providing additional tapping term config for CRKBD only.
* Code cleanup and documentation
* Update readme.md
* Update readme.md
* Wrapers and continued code cleanup and documentation
* moved oled py scripts to user folder
* completed wrapper implementation of CRKBD
* added matrix startup mode - not working yet pending upstream changes
* removed unused code in tominabox1.c
* Fixing custom keycodes and tap dance indices
fixed custom keycodes and tap dance indices
Adding beginning of dimple RGB matrix definition
changed oled on corne to scrolling matrix thing
Added copy pasta
* Secondary layer tweaks
Swapping hands of numbers and symbols as well as tweaking tapping terms accordingly
* Update tominabox1.c
Continued refinement of tapping term to support better right hand symbol access.
* Fixes from pr 7014
Removed gitignore data from qmk master
Reverted changes to Drashna's crkbd keymap
Accepted changes to crkbd keymap
Added ignore to hhkb keymap - I think I need this because Teensy. Will revisit another time
* Removing hhkb keymap for rework
* Adding back hhkb keymap
Re-adding hhkb folder with ignores
* Reverting changes to Dimple default
totally did not intend to modify these
* Update keymap.c
Reverting changes to Drashna's corne map
* Accepting recommended changes
* Reduced tap hold caps delay
moved bootmagic enable to general usage
Revised tapping terms
Removed unused keycode defs
* bootmagic
* Update rules.mk
* Fixed permissions (support 7014) and bootmagic addition
Fixed permissions on Drashna's keymap and Dimple default keymap files.
Adding bootmagic to my crkbd config.
* Fixing permissions
* Change RGBLight pin for Planck Light
Move it to A0, so that the SPI? pins are available for BT hackery
* Add QMK DFU bootloader info
* Add Solenoid
* Disable annoying white LED on bottom
* Enable Solenoid on Corne
* Remove bounds for animations
* Increase debounce for Ergodox EZ to reduce repeat key issues
* Set swap hands key to be a hold-tap key
This way, it's not ANNOYING and doesn't swap the hands inteniontally
* Move MT Alt in Corne keymap
* Re-Add fine tuned control of secrets
* Squash mods to single row
* Add LRA settings to haptic feedback settings for Rev6
* Fix issue with non-Planck EZ keymaps
* Add 40 Percent Nano with Analog Joystick
* Add Collide39 keymap
* Fix OLED printing to be more flavorful
* Fix up Iris GamePad and come cleanup
* Expand OLED char map further
* Add modded characters to keylogger
* Here be dragons
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix up rules for community layouts
* Some more OLED tweaks
* Add mod mask check function
* Change QMK DFU Audio pin to be correct
* Use manual STM config instead of CTPC for Collide 39
* Adding profile for Corne with tap dance Swedish support.
* Remove extern keymap_config_t keymap_config as no longer needed
* Changed to use tap_code over register_code
* Removed persistent_default_layer_set
* Moved macros to hvp user space ink tap dance code
* Removed not used functions
* Moved to an ifbased include statement
* Removed not needed characters
* using similar keymaps (with vim in mind) for planck and crkbd
* changed to rgb matrix and lower max brightness to prevent unresponsiveness
* readme and default rgb mode
* disable all the not wanted effects and activate the framebuffer ones
* changed effects
* changed custom keycodes to defines
* fixed comment
* [refactor] updating ninjonas layout blocks and standardized LOWER & ADJUST
* [feat] added new macro M_TERM to open MacOS terminal app
* [feat] introducing mod-tap functionality on keymap
* [fix] fixing oled turning on when it feels like it. thanks @drashna for helping
* [feat] updating OLED to rotate logo 180 degrees
* [feat] updating keymaps to reflect VSCode frequent habits
* [refactor] converting crkbd modifier keys to layer blocks
* [fix(#6903)] converting _delay_ms to wait_ms on launching terminal macro
* Add personal keymap
* Additional readme note
* Fix typo's in readme
* Additional layer key info in readme
* Update keyboards/crkbd/keymaps/rpbaptist/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/rpbaptist/rules.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/rpbaptist/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove redundant config
* Remove disabling of NO_ACTION_MACRO and NO_ACTION_FUNCTION
* Remove layer keycode macros
* Use layer_state_t instead of uint32_t
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Use get_highest_layer instead of biton32
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* OLED_ROTATION_90 instead of 180
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Use get_highest_layer instead of biton32
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Use get_highest_layer instead of biton32
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Revert "OLED_ROTATION_90 instead of 180"
This reverts commit f14a4353ab.
It messed up the logo on slave
* Use IS_LED_ON function to check LED status
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* Enable Mousekeys on Corne Keyboard by default
For Tessachka and Configurator support
* ENable for default image too
* Remove most of rules.mk for default keymap
* make sure rgblight is enabled by default
from default keymap
* Add vlukash CrKbd keymap to support trackpad adapter.
The trackpad adapter uses Elite-C board that has five extra pins.
Also SPI pins are taken for trackpad, keymap config updates column data
pins for matrix scan.
* Update vlukash keymap
* Enable pointing devide, configure mouse BTN1
* Set TAPPING_TERM to 300
* Add support for the BlackBerry 8520 trackpad
* Add vlukash keymap for master-right no-trackpad version
* Remap backspace
* Set EXTRAKEY_ENABLE = yes
* Update thumb keys mappings
* Set bootloader to atmel-dfu
* Sync keymap
* Add scrolling support
* Make debug LEDS conditional
* Add support for both flex and no-flex PCBs
* Add readme and rename root folders
* Update readme file with blog link
* Fix readme file formatting
* Remove ADJUST keycode, code cleanup.
* Add Win key to the keymap.
* Initial conversion of the rgb_led struct
* Converting last keyboard & updating effects to take advantage of the new structure
* New struct should not be const
* Updated docs
* Changing define ___ for no led to NO_LED
* Missed converting some keymap usages of the old struct layout
* Disable a bunch of reactive modes
* Enable rgb matrix for Corne Keyboard
* Convert CRKBD to rgb matrix
* Add Gergo keyboard layout
* Make Diablo 3 tap dance better
* Add basic support for Planck EZ
* Fix RGB Matrix stuff
* Fix keycodes for Planck EZ
* Update CRKBD OLED stuff
* Fix typo for sleep on ergodox glow
* Improve my gergo layout
* Scrolling OLED key logger!
* Change gergo layout
* Hnadle unicode keycodes if unicode is disabled
* Disable COMMAND/CONSOLE for gergo
* Fix right side control
* Re-enable LTO for all platforms
Since I got updated arm gcc binaries that no longer error out on lto
* Update formatting to match newer community standards
Poor 2 space
* Re-alight startup animation to use new HUE range
* Streamline gitlab ci scripts
* Disabled Space Cadet
* Add support for breathing table
* Enable new LTO Option
And clean up defines that will now be repeatitive
* Remove vscode settings
* Additional formatting cleanup of config.h files
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* Reduce CRKBD firmware size by reducing layer numbers
* Update layer output code based on mtei's suggestion/code
* Fix spacing
* Revert "Update layer output code based on mtei's suggestion/code"
This reverts commit 036d347db3.
Unfortunately, because this is NOT in the keymap itself, the layer macros aren't accessible and will error on commit
* Add comment for future person
