* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
* error log cleanup: 40percentclub/25
40percentclub/25: Claims to support a community layout that does not exist: ortho_5x5
* error log cleanup: 40percentclub/4x4
☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x8
☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x16
* error log cleanup: 40percentclub/5x5
☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x5
* error log cleanup: 40percentclub/nori
☒ 40percentclub/nori: Claims to support a community layout that does not exist: ortho_4x8
* error log cleanup: barracuda
☒ barracuda: Claims to support a community layout that does not exist: ortho_3x11
* error log cleanup: bpiphany/frosty_flake
☒ keyboards/bpiphany/frosty_flake/frosty_flake.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
* error log cleanup: bpiphany/pegasushoof/2013
☒ keyboards/bpiphany/pegasushoof/2013/2013.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
* error cleanup: bpiphany/pegasushoof/2015
☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_iso: Nested layout macro detected. Matrix data not available!
* error log cleanup: 40percentclub
☒ 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x10
☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x10
* error cleanup: converter/usb_usb
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available!
☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available!
* error cleanup: ergo42
☒ ergo42/rev1: Claims to support a community layout that does not exist: ortho_4x14
* error cleanup: handwired/412_64
☒ handwired/412_64: Claims to support a community layout that does not exist: ortho_4x16
* error log cleanup: handwired/tritium_numpad
☒ handwired/tritium_numpad: Claims to support a community layout that does not exist: nontra_6x4
* error log cleanup: handwired/xealous/rev1
☒ handwired/xealous/rev1: Claims to support a community layout that does not exist: split60
* error log cleanup: kbdfans/kbd67/rev2
⚠ kbdfans/kbd67/rev2: info.json uses alias name LAYOUT_65_ansi_blocker_splitbs instead of LAYOUT_65_ansi_blocker_split_bs
* error cleanup: keebio/nyquist
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
* error cleanup: kindakeyboards/conone65
☒ kindakeyboards/conone65: Claims to support a community layout that does not exist: 65_iso_split_bs
* error cleanup: latinpadble
☒ latinpadble: Claims to support a community layout that does not exist: pad
* error cleanup: masterworks/classy_tkl/rev_a
☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_ansi_wkl
* error cleanup: meira
⚠ meira/featherble: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT
⚠ meira/promicro: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT
* error cleanup: nopunin10did/jabberwocky
⚠ nopunin10did/jabberwocky: MANUFACTURER in config.h is overwriting manufacturer in info.json
* error cleanup: ok60
☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift
* error cleanup: ok60
☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift
* error cleanup: planck
☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available!
⚠ planck/thk: DEBOUNCE in config.h is overwriting debounce in info.json
⚠ planck/thk: DEVICE_VER in config.h is overwriting usb.device_ver in info.json
⚠ planck/thk: DIODE_DIRECTION in config.h is overwriting diode_direction in info.json
⚠ planck/thk: MANUFACTURER in config.h is overwriting manufacturer in info.json
⚠ planck/thk: PRODUCT_ID in config.h is overwriting usb.pid in info.json
⚠ planck/thk: VENDOR_ID in config.h is overwriting usb.vid in info.json
⚠ planck/thk: QMK_ESC_OUTPUT in config.h is overwriting qmk_lufa_bootloader.esc_output in info.json
⚠ planck/thk: QMK_ESC_INPUT in config.h is overwriting qmk_lufa_bootloader.esc_input in info.json
⚠ planck/thk: QMK_LED in config.h is overwriting qmk_lufa_bootloader.led in info.json
⚠ planck/thk: QMK_SPEAKER in config.h is overwriting qmk_lufa_bootloader.speaker in info.json
⚠ planck/thk: Matrix pins are specified in both info.json and config.h, the config.h values win.
⚠ planck/thk: LAYOUTS in rules.mk is overwriting community_layouts in info.json
⚠ planck/thk: Feature mousekey is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature extrakey is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature console is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature command is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature sleep_led is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature nkro is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature backlight is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature rgblight is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature bluetooth is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature audio is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature encoder is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature dip_switch is specified in both info.json and rules.mk, the rules.mk value wins.
⚠ planck/thk: Feature bootmagic_lite is specified in both info.json and rules.mk, the rules.mk value wins.
* error cleanup: primekb/prime_m
☒ primekb/prime_m: Claims to support a community layout that does not exist: ortho_5x6
* error cleanup: rgbkb/sol/rev2
⚠ rgbkb/sol/rev2: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(BACKLIGHT_LEDS + FULLHAND_LEDS)'
* error log cleanup: shk9
☒ shk9: Claims to support a community layout that does not exist: ortho_3x3
* error log cleanup: sowbug
⚠ sowbug/68keys: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: 'DRIVER_LED_TOTAL'
⚠ sowbug/ansi_tkl: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(DRIVER_LED_TOTAL)'
* error log cleanup: torn
☒ torn: Claims to support a community layout that does not exist: split_3x6_4
* error cleanup: ymdk/np24/u4rgb6
☒ ymdk/np24/u4rgb6: Claims to support a community layout that does not exist: ortho_4x6
* error cleanup: masterworks/classy_tkl/rev_a
☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_iso_wkl
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* Update Space Cadet to use Custom Tapping Term functionality
* Detect correct keycode for space cadet tapping term
* Update tap dancing to use global custom tapping term
* Update documentation for Tap Dances
* formatting pass
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_tap_dance.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update for future
* Update user keymaps for space cadet
* Fix typos
* Clean up tapping term stuff
* Fix compiler issue if NO_ACTION_TAPPING is enabled
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files
* Correct some 'rules.mk' in boards buried under vendor folders
* PR8027 patch
Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'
* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'
* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
* Fix Print Screen key for XT to USB converter
* While I'm here, get rid of led.c as it does absolutely nothing
* Fix info.json too
* "]" key is 1.25U and stepped on the Model F XT
* Revert raise/backspace mod tap to just backspace
* Initialize usb_usb/narze
* Modify keys
* Add readme
* Support Right shift to )
* Add Dev layer
* Use Dev layer on holding z key
* Add Dev layer for Ergodox
* Update keyboards/converter/usb_usb/keymaps/narze/README.md
Fix the command & close the code block as suggested
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Reduce rules
* Remove problematic unicode_map stub definition in process_unicodemap.c
* Add unicode_map declaration to process_unicodemap.h
* Disable UNICODEMAP on converter boards that don't use it
* Fix mixed tabs and spaces in adb_usb and m0110_usb makefiles
* Fix typos in converter build options
* Tweak ordering and spacing in converter makefiles
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
* converter/ibm_5291: Configurator support
- added layout data to info.json file
- corrected keyboard_folder value
* converter/ibm_5291: readme cleanup
- Fixed "image" url (target of link was a web page; changed markdown formatting to text link)
- Sentence capitalization fixes
- markdown formatting fixes for readability
* Initial palm_usb support
* removing left over sun .c file
* fixing licenses
* actually adding updated files
* fixing build error
* more include cleanup
* compiles but is not working
* still testing 5291
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* fixed some issues
* doumentation needed
* doumentation needed
* documentation needed
* documentation needed
* Update readme.md
documentation
* Update readme.md
i dislike markdown <_>
* merge preperation
* converter/adb_usb: Configurator support
Note: LAYOUT_ext_ansi has a blank space between the Spacebar and the
Right Alt/Option key when loaded in the Configurator. This is
deliberate.
Stock Apple Extended Keyboards and AEK IIs send the scan code for Left
Command when either Command key is used. (This is noted already in the
readme.) That being the case, the Command keys cannot be assigned to
different functions. Whichever keycode is placed on Left Command will be
used for both Command keys.
* converter/adb_usb: adb_usb.h cleanup
- replaced KEYMAP_COMMON_H with ADB_USB_H
- white space changes for visual alignment in LAYOUT_ext_ansi macro
