diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 76c5c4f90b3..af548f37fe3 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -83,13 +83,13 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
 
 | Variable | Description | Default |
 |----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3733_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3733_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3733_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
+| `IS31FL3733_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3733_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3733_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3733_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
@@ -100,17 +100,17 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
 | `DRIVER_SYNC_3` | (Optional) Sync configuration for the third RGB driver | 0 |
 | `DRIVER_SYNC_4` | (Optional) Sync configuration for the fourth RGB driver | 0 |
 
-The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3733_SWPULLUP`/`IS31FL3733_CSPULLUP` are given the value of `IS31FL3733_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
 
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3733_SWPULLUP/IS31FL3733_CSPULLUP` | Description |
 |----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_3KR` | The 3k Ohm resistor used at all times |
-| `PUR_4KR` | The 4k Ohm resistor used at all times |
-| `PUR_8KR` | The 8k Ohm resistor used at all times |
-| `PUR_16KR` | The 16k Ohm resistor used at all times |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3733_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3733_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3733_PUR_3KR` | The 3k Ohm resistor used at all times |
+| `IS31FL3733_PUR_4KR` | The 4k Ohm resistor used at all times |
+| `IS31FL3733_PUR_8KR` | The 8k Ohm resistor used at all times |
+| `IS31FL3733_PUR_16KR` | The 16k Ohm resistor used at all times |
+| `IS31FL3733_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
 
 Here is an example using 2 drivers.
 
@@ -128,7 +128,7 @@ Here is an example using 2 drivers.
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010011
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 58
 #define DRIVER_2_LED_TOTAL 10
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
@@ -170,31 +170,31 @@ Configure the hardware via your `config.h`:
 
 | Variable | Description | Default |
 |----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 |
-| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
-| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3736_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3736_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3736_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 |
+| `IS31FL3736_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `IS31FL3736_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3736_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
+| `IS31FL3736_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
 | `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
 | `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
 
-The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
+The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3736_SWPULLUP`/`IS31FL3736_CSPULLUP` are given the value of `IS31FL3736_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
 
-| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
+| `IS31FL3736_SWPULLUP/IS31FL3736_CSPULLUP` | Description |
 |----------------------|-------------|
-| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
-| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
-| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
-| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
-| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
+| `IS31FL3736_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
+| `IS31FL3736_PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3736_PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
+| `IS31FL3736_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
 
 Here is an example using 2 drivers.
 
@@ -211,7 +211,7 @@ Here is an example using 2 drivers.
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010001
 
-#define DRIVER_COUNT 2
+#define IS31FL3736_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 #define DRIVER_2_LED_TOTAL 32
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c
index f9a0a271a89..fde492509f6 100644
--- a/drivers/led/issi/is31fl3733-simple.c
+++ b/drivers/led/issi/is31fl3733-simple.c
@@ -19,6 +19,7 @@
  */
 
 #include "is31fl3733-simple.h"
+#include <string.h>
 #include "i2c_master.h"
 #include "wait.h"
 
@@ -32,46 +33,46 @@
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
+#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3733_COMMANDREGISTER 0xFD
+#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01        // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03   // PG3
+#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3733_PAGE_PWM 0x01        // PG1
+#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3733_PAGE_FUNCTION 0x03   // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11         // PG3
-#define ISSI_REG_SWPULLUP 0x0F      // PG3
-#define ISSI_REG_CSPULLUP 0x10      // PG3
+#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3733_REG_RESET 0x11         // PG3
+#define IS31FL3733_REG_SWPULLUP 0x0F      // PG3
+#define IS31FL3733_REG_CSPULLUP 0x10      // PG3
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#ifndef IS31FL3733_I2C_TIMEOUT
+#    define IS31FL3733_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3733_I2C_PERSISTENCE
+#    define IS31FL3733_I2C_PERSISTENCE 0
 #endif
 
-#ifndef ISSI_PWM_FREQUENCY
-#    define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+#ifndef IS31FL3733_PWM_FREQUENCY
+#    define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
 #endif
 
-#ifndef ISSI_SWPULLUP
-#    define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3733_SWPULLUP
+#    define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
 #endif
 
-#ifndef ISSI_CSPULLUP
-#    define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3733_CSPULLUP
+#    define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
 #endif
 
-#ifndef ISSI_GLOBALCURRENT
-#    define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3733_GLOBALCURRENT
+#    define IS31FL3733_GLOBALCURRENT 0xFF
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -83,34 +84,34 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[LED_DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
+bool    g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
 /* There's probably a better way to init this... */
-#if LED_DRIVER_COUNT == 1
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}};
-#elif LED_DRIVER_COUNT == 2
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}};
-#elif LED_DRIVER_COUNT == 3
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}};
-#elif LED_DRIVER_COUNT == 4
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}};
+#if IS31FL3733_DRIVER_COUNT == 1
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}};
+#elif IS31FL3733_DRIVER_COUNT == 2
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}};
+#elif IS31FL3733_DRIVER_COUNT == 3
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}, {0}};
+#elif IS31FL3733_DRIVER_COUNT == 4
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}};
 #endif
-bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false};
+bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
 bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -131,14 +132,14 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
@@ -154,20 +155,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
     // Turn off all LEDs.
     for (int i = 0x00; i <= 0x17; i++) {
         is31fl3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0x00; i <= 0xBF; i++) {
@@ -175,18 +176,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
     }
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
     // Set de-ghost pull-up resistors (SWx)
-    is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+    is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
     // Set de-ghost pull-down resistors (CSx)
-    is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+    is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
     // Set global current to maximum.
-    is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+    is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
     // Disable software shutdown.
-    is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+    is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
 
     // Wait 10ms to ensure the device has woken up.
     wait_ms(10);
@@ -230,8 +231,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value) {
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1.
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
@@ -245,8 +246,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
         for (int i = 0; i < 24; i++) {
             is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
         }
diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h
index 1458f7ac8dd..a557cabd7e9 100644
--- a/drivers/led/issi/is31fl3733-simple.h
+++ b/drivers/led/issi/is31fl3733-simple.h
@@ -22,9 +22,40 @@
 
 #include <stdint.h>
 #include <stdbool.h>
-#include <string.h>
 #include "progmem.h"
 
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef LED_DRIVER_COUNT
+#    define IS31FL3733_DRIVER_COUNT LED_DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_PWM_FREQUENCY
+#    define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
+#endif
+#ifdef ISSI_SWPULLUP
+#    define IS31FL3733_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+#    define IS31FL3733_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+#    define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3733_PUR_0R
+#define PUR_05KR IS31FL3733_PUR_05KR
+#define PUR_3KR IS31FL3733_PUR_3KR
+#define PUR_4KR IS31FL3733_PUR_4KR
+#define PUR_8KR IS31FL3733_PUR_8KR
+#define PUR_16KR IS31FL3733_PUR_16KR
+#define PUR_32KR IS31FL3733_PUR_32KR
+// ========
+
 typedef struct is31_led {
     uint8_t driver : 2;
     uint8_t v;
@@ -48,13 +79,13 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value);
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
 
-#define PUR_0R 0x00   // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03  // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04  // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05  // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_0R 0x00   // No PUR resistor
+#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_3KR 0x03  // 3.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_4KR 0x04  // 4.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_8KR 0x05  // 8.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
 
 #define A_1 0x00
 #define A_2 0x01
diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c
index ca431838ef5..ecb721196d2 100644
--- a/drivers/led/issi/is31fl3733.c
+++ b/drivers/led/issi/is31fl3733.c
@@ -18,6 +18,7 @@
  */
 
 #include "is31fl3733.h"
+#include <string.h>
 #include "i2c_master.h"
 #include "wait.h"
 
@@ -31,46 +32,46 @@
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
+#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3733_COMMANDREGISTER 0xFD
+#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01        // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03   // PG3
+#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3733_PAGE_PWM 0x01        // PG1
+#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3733_PAGE_FUNCTION 0x03   // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11         // PG3
-#define ISSI_REG_SWPULLUP 0x0F      // PG3
-#define ISSI_REG_CSPULLUP 0x10      // PG3
+#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3733_REG_RESET 0x11         // PG3
+#define IS31FL3733_REG_SWPULLUP 0x0F      // PG3
+#define IS31FL3733_REG_CSPULLUP 0x10      // PG3
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#ifndef IS31FL3733_I2C_TIMEOUT
+#    define IS31FL3733_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3733_I2C_PERSISTENCE
+#    define IS31FL3733_I2C_PERSISTENCE 0
 #endif
 
-#ifndef ISSI_PWM_FREQUENCY
-#    define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+#ifndef IS31FL3733_PWM_FREQUENCY
+#    define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
 #endif
 
-#ifndef ISSI_SWPULLUP
-#    define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3733_SWPULLUP
+#    define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
 #endif
 
-#ifndef ISSI_CSPULLUP
-#    define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3733_CSPULLUP
+#    define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
 #endif
 
-#ifndef ISSI_GLOBALCURRENT
-#    define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3733_GLOBALCURRENT
+#    define IS31FL3733_GLOBALCURRENT 0xFF
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -82,25 +83,25 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
+bool    g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {0};
-bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24]             = {0};
+bool    g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
 bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -119,18 +120,16 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
         // Copy the data from i to i+15.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
-        for (int j = 0; j < 16; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
-        }
+        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
@@ -146,20 +145,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
     // Turn off all LEDs.
     for (int i = 0x00; i <= 0x17; i++) {
         is31fl3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0x00; i <= 0xBF; i++) {
@@ -167,18 +166,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
     }
 
     // Unlock the command register.
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
     // Set de-ghost pull-up resistors (SWx)
-    is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+    is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
     // Set de-ghost pull-down resistors (CSx)
-    is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+    is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
     // Set global current to maximum.
-    is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+    is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
     // Disable software shutdown.
-    is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+    is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
 
     // Wait 10ms to ensure the device has woken up.
     wait_ms(10);
@@ -238,26 +237,26 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1.
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
         if (!is31fl3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
             g_led_control_registers_update_required[index] = true;
         }
+        g_pwm_buffer_update_required[index] = false;
     }
-    g_pwm_buffer_update_required[index] = false;
 }
 
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
         for (int i = 0; i < 24; i++) {
             is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
         }
+        g_led_control_registers_update_required[index] = false;
     }
-    g_led_control_registers_update_required[index] = false;
 }
diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h
index f37a58de0f9..633ed71ee65 100644
--- a/drivers/led/issi/is31fl3733.h
+++ b/drivers/led/issi/is31fl3733.h
@@ -23,6 +23,38 @@
 #include <stdbool.h>
 #include "progmem.h"
 
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+#    define IS31FL3733_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_PWM_FREQUENCY
+#    define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
+#endif
+#ifdef ISSI_SWPULLUP
+#    define IS31FL3733_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+#    define IS31FL3733_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+#    define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3733_PUR_0R
+#define PUR_05KR IS31FL3733_PUR_05KR
+#define PUR_3KR IS31FL3733_PUR_3KR
+#define PUR_4KR IS31FL3733_PUR_4KR
+#define PUR_8KR IS31FL3733_PUR_8KR
+#define PUR_16KR IS31FL3733_PUR_16KR
+#define PUR_32KR IS31FL3733_PUR_32KR
+// ========
+
 typedef struct is31_led {
     uint8_t driver : 2;
     uint8_t r;
@@ -48,13 +80,13 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
 
-#define PUR_0R 0x00   // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03  // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04  // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05  // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_0R 0x00   // No PUR resistor
+#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_3KR 0x03  // 3.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_4KR 0x04  // 4.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_8KR 0x05  // 8.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
 
 #define A_1 0x00
 #define A_2 0x01
diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c
index 0de8b3bbaef..a070836b38e 100644
--- a/drivers/led/issi/is31fl3736.c
+++ b/drivers/led/issi/is31fl3736.c
@@ -16,6 +16,7 @@
  */
 
 #include "is31fl3736.h"
+#include <string.h>
 #include "i2c_master.h"
 #include "wait.h"
 
@@ -29,42 +30,42 @@
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
+#define IS31FL3736_I2C_ADDRESS_DEFAULT 0x50
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3736_COMMANDREGISTER 0xFD
+#define IS31FL3736_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3736_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3736_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01        // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03   // PG3
+#define IS31FL3736_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3736_PAGE_PWM 0x01        // PG1
+#define IS31FL3736_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3736_PAGE_FUNCTION 0x03   // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11         // PG3
-#define ISSI_REG_SWPULLUP 0x0F      // PG3
-#define ISSI_REG_CSPULLUP 0x10      // PG3
+#define IS31FL3736_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3736_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3736_REG_RESET 0x11         // PG3
+#define IS31FL3736_REG_SWPULLUP 0x0F      // PG3
+#define IS31FL3736_REG_CSPULLUP 0x10      // PG3
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#ifndef IS31FL3736_TIMEOUT
+#    define IS31FL3736_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3736_I2C_PERSISTENCE
+#    define IS31FL3736_I2C_PERSISTENCE 0
 #endif
 
-#ifndef ISSI_SWPULLUP
-#    define ISSI_SWPULLUP PUR_0R
+#ifndef IS31FL3736_SWPULLUP
+#    define IS31FL3736_SWPULLUP IS31FL3736_PUR_0R
 #endif
 
-#ifndef ISSI_CSPULLUP
-#    define ISSI_CSPULLUP PUR_0R
+#ifndef IS31FL3736_CSPULLUP
+#    define IS31FL3736_CSPULLUP IS31FL3736_PUR_0R
 #endif
 
-#ifndef ISSI_GLOBALCURRENT
-#    define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3736_GLOBALCURRENT
+#    define IS31FL3736_GLOBALCURRENT 0xFF
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -76,22 +77,22 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3736_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3736_DRIVER_COUNT][192];
+bool    g_pwm_buffer_update_required[IS31FL3736_DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
-bool    g_led_control_registers_update_required   = false;
+uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][24] = {{0}, {0}};
+bool    g_led_control_registers_update_required              = false;
 
 void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3736_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
 #endif
 }
 
@@ -109,12 +110,12 @@ void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3736_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
 #endif
     }
 }
@@ -126,20 +127,20 @@ void is31fl3736_init(uint8_t addr) {
     // then disable software shutdown.
 
     // Unlock the command register.
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
     // Turn off all LEDs.
     for (int i = 0x00; i <= 0x17; i++) {
         is31fl3736_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0x00; i <= 0xBF; i++) {
@@ -147,18 +148,18 @@ void is31fl3736_init(uint8_t addr) {
     }
 
     // Unlock the command register.
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_FUNCTION);
     // Set de-ghost pull-up resistors (SWx)
-    is31fl3736_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
+    is31fl3736_write_register(addr, IS31FL3736_REG_SWPULLUP, IS31FL3736_SWPULLUP);
     // Set de-ghost pull-down resistors (CSx)
-    is31fl3736_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
+    is31fl3736_write_register(addr, IS31FL3736_REG_CSPULLUP, IS31FL3736_CSPULLUP);
     // Set global current to maximum.
-    is31fl3736_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+    is31fl3736_write_register(addr, IS31FL3736_REG_GLOBALCURRENT, IS31FL3736_GLOBALCURRENT);
     // Disable software shutdown.
-    is31fl3736_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
+    is31fl3736_write_register(addr, IS31FL3736_REG_CONFIGURATION, 0x01);
 
     // Wait 10ms to ensure the device has woken up.
     wait_ms(10);
@@ -266,19 +267,19 @@ void is31fl3736_mono_set_led_control_register(uint8_t index, bool enabled) {
 void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1
-        is31fl3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+        is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
 
         is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        g_pwm_buffer_update_required[index] = false;
     }
-    g_pwm_buffer_update_required[index] = false;
 }
 
 void is31fl3736_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
     if (g_led_control_registers_update_required) {
         // Firstly we need to unlock the command register and select PG0
-        is31fl3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        is31fl3736_write_register(addr1, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3736_write_register(addr1, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
         for (int i = 0; i < 24; i++) {
             is31fl3736_write_register(addr1, i, g_led_control_registers[0][i]);
             // is31fl3736_write_register(addr2, i, g_led_control_registers[1][i]);
diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h
index 32bdef4a808..90e59da8b01 100644
--- a/drivers/led/issi/is31fl3736.h
+++ b/drivers/led/issi/is31fl3736.h
@@ -19,19 +19,37 @@
 
 #include <stdint.h>
 #include <stdbool.h>
-#include <string.h>
 #include "progmem.h"
 
-// Simple interface option.
-// If these aren't defined, just define them to make it compile
-
-#ifndef DRIVER_COUNT
-#    define DRIVER_COUNT 2
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+#    define IS31FL3736_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3736_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3736_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_SWPULLUP
+#    define IS31FL3736_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+#    define IS31FL3736_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+#    define IS31FL3736_GLOBALCURRENT ISSI_GLOBALCURRENT
 #endif
 
-#ifndef RGB_MATRIX_LED_COUNT
-#    define RGB_MATRIX_LED_COUNT 96
-#endif
+#define PUR_0R IS31FL3736_PUR_0R
+#define PUR_05KR IS31FL3736_PUR_05KR
+#define PUR_1KR IS31FL3736_PUR_1KR
+#define PUR_2KR IS31FL3736_PUR_2KR
+#define PUR_4KR IS31FL3736_PUR_4KR
+#define PUR_8KR IS31FL3736_PUR_8KR
+#define PUR_16KR IS31FL3736_PUR_16KR
+#define PUR_32KR IS31FL3736_PUR_32KR
+// ========
 
 typedef struct is31_led {
     uint8_t driver : 2;
@@ -62,14 +80,14 @@ void is31fl3736_mono_set_led_control_register(uint8_t index, bool enabled);
 void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index);
 void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index);
 
-#define PUR_0R 0x00   // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02  // 1.0k Ohm resistor
-#define PUR_2KR 0x03  // 2.0k Ohm resistor
-#define PUR_4KR 0x04  // 4.0k Ohm resistor
-#define PUR_8KR 0x05  // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define IS31FL3736_PUR_0R 0x00   // No PUR resistor
+#define IS31FL3736_PUR_05KR 0x01 // 0.5k Ohm resistor
+#define IS31FL3736_PUR_1KR 0x02  // 1.0k Ohm resistor
+#define IS31FL3736_PUR_2KR 0x03  // 2.0k Ohm resistor
+#define IS31FL3736_PUR_4KR 0x04  // 4.0k Ohm resistor
+#define IS31FL3736_PUR_8KR 0x05  // 8.0k Ohm resistor
+#define IS31FL3736_PUR_16KR 0x06 // 16k Ohm resistor
+#define IS31FL3736_PUR_32KR 0x07 // 32k Ohm resistor
 
 #define A_1 0x00
 #define A_2 0x02
diff --git a/keyboards/4pplet/perk60_iso/rev_a/config.h b/keyboards/4pplet/perk60_iso/rev_a/config.h
index e033b162593..a37f0cd09ad 100644
--- a/keyboards/4pplet/perk60_iso/rev_a/config.h
+++ b/keyboards/4pplet/perk60_iso/rev_a/config.h
@@ -22,9 +22,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define DRIVER_ADDR_1 0b1010000
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 62
-#define ISSI_PWM_FREQUENCY 0b010
+#define IS31FL3733_PWM_FREQUENCY 0b010
 
 #define RGB_MATRIX_DEFAULT_VAL 80
 #define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/abko/ak84bt/config.h b/keyboards/abko/ak84bt/config.h
index f6a3b55851f..8c08c88055f 100644
--- a/keyboards/abko/ak84bt/config.h
+++ b/keyboards/abko/ak84bt/config.h
@@ -20,7 +20,7 @@
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010011
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 45
 #define DRIVER_2_LED_TOTAL 45
 
diff --git a/keyboards/akko/5108/config.h b/keyboards/akko/5108/config.h
index f56e825e050..4c04933bcf9 100644
--- a/keyboards/akko/5108/config.h
+++ b/keyboards/akko/5108/config.h
@@ -38,7 +38,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_SCL_PAL_MODE 4
diff --git a/keyboards/akko/acr87/config.h b/keyboards/akko/acr87/config.h
index 221cad86ad1..6e4d8dd5743 100644
--- a/keyboards/akko/acr87/config.h
+++ b/keyboards/akko/acr87/config.h
@@ -35,7 +35,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 3
+#define IS31FL3733_DRIVER_COUNT 3
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define DRIVER_ADDR_3 0b1110110
diff --git a/keyboards/akko/top40/config.h b/keyboards/akko/top40/config.h
index bd849292e6a..e8672856ef6 100644
--- a/keyboards/akko/top40/config.h
+++ b/keyboards/akko/top40/config.h
@@ -35,7 +35,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_SCL_PAL_MODE 4
diff --git a/keyboards/axolstudio/yeti/hotswap/config.h b/keyboards/axolstudio/yeti/hotswap/config.h
index 694a6449f0f..85d9cfbedde 100644
--- a/keyboards/axolstudio/yeti/hotswap/config.h
+++ b/keyboards/axolstudio/yeti/hotswap/config.h
@@ -62,6 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 16       // 16 is equivalent to limiting to 60fps
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED      // turn off effects when suspended
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 64
 #endif
diff --git a/keyboards/canary/canary60rgb/v1/config.h b/keyboards/canary/canary60rgb/v1/config.h
index e8d0808384f..2b733b26491 100644
--- a/keyboards/canary/canary60rgb/v1/config.h
+++ b/keyboards/canary/canary60rgb/v1/config.h
@@ -34,6 +34,6 @@
 #    define DISABLE_RGB_MATRIX_SOLID_SPLASH
 #    define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 63
 #endif
diff --git a/keyboards/chosfox/cf81/config.h b/keyboards/chosfox/cf81/config.h
index b1ea8bba200..95b2aca6889 100644
--- a/keyboards/chosfox/cf81/config.h
+++ b/keyboards/chosfox/cf81/config.h
@@ -35,7 +35,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_OPMODE OPMODE_I2C
diff --git a/keyboards/drop/alt/v2/config.h b/keyboards/drop/alt/v2/config.h
index f3f432390e1..f2564262190 100644
--- a/keyboards/drop/alt/v2/config.h
+++ b/keyboards/drop/alt/v2/config.h
@@ -16,9 +16,9 @@
 
 #define DRIVER_ADDR_1 0b1010011
 #define DRIVER_ADDR_2 0b1011111
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 111
-#define ISSI_PWM_FREQUENCY 0b010 // 26k
+#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
 
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_DEFAULT_VAL 100
diff --git a/keyboards/drop/ctrl/v2/config.h b/keyboards/drop/ctrl/v2/config.h
index 539c505cb38..dbb1220afca 100644
--- a/keyboards/drop/ctrl/v2/config.h
+++ b/keyboards/drop/ctrl/v2/config.h
@@ -16,9 +16,9 @@
 
 #define DRIVER_ADDR_1 0b1010011
 #define DRIVER_ADDR_2 0b1011111
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 119
-#define ISSI_PWM_FREQUENCY 0b010 // 26k
+#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
 
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_DEFAULT_VAL 100
diff --git a/keyboards/drop/sense75/config.h b/keyboards/drop/sense75/config.h
index b8d47c311c2..0b85e295552 100644
--- a/keyboards/drop/sense75/config.h
+++ b/keyboards/drop/sense75/config.h
@@ -11,9 +11,9 @@
 
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1011111
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 111
-#define ISSI_PWM_FREQUENCY 0b010 // 26k
+#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
 
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/drop/shift/v2/config.h b/keyboards/drop/shift/v2/config.h
index 6c651d1f83a..f78dcb1b0c7 100644
--- a/keyboards/drop/shift/v2/config.h
+++ b/keyboards/drop/shift/v2/config.h
@@ -17,9 +17,9 @@
 #define DRIVER_ADDR_1 0b1010011
 #define DRIVER_ADDR_2 0b1011111
 #define DRIVER_ADDR_3 0b1010000
-#define DRIVER_COUNT 3
+#define IS31FL3733_DRIVER_COUNT 3
 #define RGB_MATRIX_LED_COUNT 166
-#define ISSI_PWM_FREQUENCY 0b010 // 26k
+#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
 
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_DEFAULT_VAL 100
diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h
index beb580a5881..12addab8e83 100644
--- a/keyboards/durgod/dgk6x/config.h
+++ b/keyboards/durgod/dgk6x/config.h
@@ -48,7 +48,7 @@
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010011
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 /* I2C Alternate function settings */
diff --git a/keyboards/dztech/dz60rgb/v1/config.h b/keyboards/dztech/dz60rgb/v1/config.h
index 82d7b6d1e1d..bd5663d0f22 100644
--- a/keyboards/dztech/dz60rgb/v1/config.h
+++ b/keyboards/dztech/dz60rgb/v1/config.h
@@ -56,6 +56,6 @@
 
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 63
 #endif
diff --git a/keyboards/dztech/dz60rgb/v2/config.h b/keyboards/dztech/dz60rgb/v2/config.h
index 094478f34d8..73e37406cb3 100644
--- a/keyboards/dztech/dz60rgb/v2/config.h
+++ b/keyboards/dztech/dz60rgb/v2/config.h
@@ -54,6 +54,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 63
 #endif
diff --git a/keyboards/dztech/dz60rgb/v2_1/config.h b/keyboards/dztech/dz60rgb/v2_1/config.h
index a753832ed1d..669c343fa0e 100644
--- a/keyboards/dztech/dz60rgb/v2_1/config.h
+++ b/keyboards/dztech/dz60rgb/v2_1/config.h
@@ -70,6 +70,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 63
 #endif
diff --git a/keyboards/dztech/dz60rgb_ansi/v1/config.h b/keyboards/dztech/dz60rgb_ansi/v1/config.h
index 5405d671a52..016588e7ba1 100644
--- a/keyboards/dztech/dz60rgb_ansi/v1/config.h
+++ b/keyboards/dztech/dz60rgb_ansi/v1/config.h
@@ -56,6 +56,6 @@
 
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 61
 #endif
diff --git a/keyboards/dztech/dz60rgb_ansi/v2/config.h b/keyboards/dztech/dz60rgb_ansi/v2/config.h
index 545aa64eeaf..87718ad5e30 100644
--- a/keyboards/dztech/dz60rgb_ansi/v2/config.h
+++ b/keyboards/dztech/dz60rgb_ansi/v2/config.h
@@ -54,6 +54,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 61
 #endif
diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h
index 90b6c71e67f..2981fb2f59d 100644
--- a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h
+++ b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h
@@ -70,6 +70,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 61
 #endif
diff --git a/keyboards/dztech/dz60rgb_wkl/v1/config.h b/keyboards/dztech/dz60rgb_wkl/v1/config.h
index cfe82a7323d..e4819dd4158 100644
--- a/keyboards/dztech/dz60rgb_wkl/v1/config.h
+++ b/keyboards/dztech/dz60rgb_wkl/v1/config.h
@@ -56,6 +56,6 @@
 
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 62
 #endif
diff --git a/keyboards/dztech/dz60rgb_wkl/v2/config.h b/keyboards/dztech/dz60rgb_wkl/v2/config.h
index 38a1aa2c76d..286f0718c6f 100644
--- a/keyboards/dztech/dz60rgb_wkl/v2/config.h
+++ b/keyboards/dztech/dz60rgb_wkl/v2/config.h
@@ -51,6 +51,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 62
 #endif
diff --git a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h
index 5bcfb21cf73..41274a6bac8 100644
--- a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h
+++ b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h
@@ -70,6 +70,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1      0b1010000
-#    define DRIVER_COUNT       1
+#    define IS31FL3733_DRIVER_COUNT       1
 #    define RGB_MATRIX_LED_COUNT   62
 #endif
diff --git a/keyboards/dztech/dz64rgb/config.h b/keyboards/dztech/dz64rgb/config.h
index 43e1b1c609a..a1e779f73c5 100644
--- a/keyboards/dztech/dz64rgb/config.h
+++ b/keyboards/dztech/dz64rgb/config.h
@@ -49,7 +49,7 @@
 #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1010000
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 64
 #endif
 #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h
index f50975beb3f..d15141e5a57 100644
--- a/keyboards/evyd13/atom47/rev5/config.h
+++ b/keyboards/evyd13/atom47/rev5/config.h
@@ -49,7 +49,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
 #define DRIVER_ADDR_1 0b1010000
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 64
 
 // RGB Matrix Animation modes. Explicitly enabled
diff --git a/keyboards/exclusive/e6_rgb/config.h b/keyboards/exclusive/e6_rgb/config.h
index 7f820b2cadf..0e5ecaaa9d6 100644
--- a/keyboards/exclusive/e6_rgb/config.h
+++ b/keyboards/exclusive/e6_rgb/config.h
@@ -6,5 +6,5 @@
 
 #define DRIVER_ADDR_1 0b1010000
 
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 63
diff --git a/keyboards/feker/ik75/config.h b/keyboards/feker/ik75/config.h
index a9914722fc9..2e813d14772 100644
--- a/keyboards/feker/ik75/config.h
+++ b/keyboards/feker/ik75/config.h
@@ -27,7 +27,7 @@
     /* RGB Matrix config */
     #define DRIVER_ADDR_1 0b1011111
     #define DRIVER_ADDR_2 0b1010000
-    #define DRIVER_COUNT 2
+    #define IS31FL3733_DRIVER_COUNT 2
     #define DRIVER_1_LED_TOTAL 63
     #define DRIVER_2_LED_TOTAL 64
 
diff --git a/keyboards/flashquark/horizon_z/config.h b/keyboards/flashquark/horizon_z/config.h
index 8828834d740..dac6caa24da 100755
--- a/keyboards/flashquark/horizon_z/config.h
+++ b/keyboards/flashquark/horizon_z/config.h
@@ -73,6 +73,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 62
 #endif
diff --git a/keyboards/hs60/v2/ansi/config.h b/keyboards/hs60/v2/ansi/config.h
index 614b44d4d4c..8b31f0e0660 100644
--- a/keyboards/hs60/v2/ansi/config.h
+++ b/keyboards/hs60/v2/ansi/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 64
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/hs60/v2/hhkb/config.h b/keyboards/hs60/v2/hhkb/config.h
index e8346160683..7494b2e66cb 100644
--- a/keyboards/hs60/v2/hhkb/config.h
+++ b/keyboards/hs60/v2/hhkb/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 64
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/hs60/v2/iso/config.h b/keyboards/hs60/v2/iso/config.h
index 7421f1bf125..22608404b54 100644
--- a/keyboards/hs60/v2/iso/config.h
+++ b/keyboards/hs60/v2/iso/config.h
@@ -50,7 +50,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 64
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/inland/kb83/config.h b/keyboards/inland/kb83/config.h
index d1e7d11acc6..e1b6702bd8e 100644
--- a/keyboards/inland/kb83/config.h
+++ b/keyboards/inland/kb83/config.h
@@ -39,7 +39,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_SDA_PIN B7
diff --git a/keyboards/inland/mk47/config.h b/keyboards/inland/mk47/config.h
index 678686555ab..7004b38e632 100644
--- a/keyboards/inland/mk47/config.h
+++ b/keyboards/inland/mk47/config.h
@@ -26,7 +26,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (4 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define DRIVER_ADDR_1 0b1110100
 /* WB32 MCU has no default definition */
 #define I2C1_OPMODE OPMODE_I2C
diff --git a/keyboards/input_club/k_type/config.h b/keyboards/input_club/k_type/config.h
index 2a4c7d057c7..5d4d515d77c 100644
--- a/keyboards/input_club/k_type/config.h
+++ b/keyboards/input_club/k_type/config.h
@@ -105,7 +105,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #    define DRIVER_ADDR_1 0b1010000
 #    define DRIVER_ADDR_2 0b1010000
-#    define DRIVER_COUNT 2
+#    define IS31FL3733_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 64
 #    define DRIVER_2_LED_TOTAL 55
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/keyboards/input_club/k_type/is31fl3733-dual.c b/keyboards/input_club/k_type/is31fl3733-dual.c
index 2dec2b0a26f..dd1e268cd65 100644
--- a/keyboards/input_club/k_type/is31fl3733-dual.c
+++ b/keyboards/input_club/k_type/is31fl3733-dual.c
@@ -16,8 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifdef RGB_MATRIX_ENABLE
-
 #include "is31fl3733-dual.h"
 #include "i2c_master.h"
 #include "wait.h"
@@ -32,30 +30,46 @@
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
+#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3733_COMMANDREGISTER 0xFD
+#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
-#define ISSI_PAGE_PWM 0x01         // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
-#define ISSI_PAGE_FUNCTION 0x03    // PG3
+#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
+#define IS31FL3733_PAGE_PWM 0x01        // PG1
+#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
+#define IS31FL3733_PAGE_FUNCTION 0x03   // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00  // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
-#define ISSI_REG_RESET 0x11          // PG3
-#define ISSI_REG_SWPULLUP 0x0F       // PG3
-#define ISSI_REG_CSPULLUP 0x10       // PG3
+#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
+#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
+#define IS31FL3733_REG_RESET 0x11         // PG3
+#define IS31FL3733_REG_SWPULLUP 0x0F      // PG3
+#define IS31FL3733_REG_CSPULLUP 0x10      // PG3
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 5000
+#ifndef IS31FL3733_I2C_TIMEOUT
+#    define IS31FL3733_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3733_I2C_PERSISTENCE
+#    define IS31FL3733_I2C_PERSISTENCE 0
+#endif
+
+#ifndef IS31FL3733_PWM_FREQUENCY
+#    define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+#endif
+
+#ifndef IS31FL3733_SWPULLUP
+#    define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
+#endif
+
+#ifndef IS31FL3733_CSPULLUP
+#    define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
+#endif
+
+#ifndef IS31FL3733_GLOBALCURRENT
+#    define IS31FL3733_GLOBALCURRENT 0xFF
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -67,25 +81,25 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
+bool    g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
-bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24]             = {{0}, {0}};
+bool    g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
 
 bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, TIME_US2I(ISSI_TIMEOUT)) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, TIME_US2I(ISSI_TIMEOUT)) != 0) {
+    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -108,14 +122,14 @@ bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffe
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, TIME_US2I(ISSI_TIMEOUT)) != 0) {
+#if IS31FL3733_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, TIME_US2I(ISSI_TIMEOUT)) != 0) {
+        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
@@ -131,38 +145,52 @@ void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+
     // Select PG0
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
     // Turn off all LEDs.
     for (int i = 0x00; i <= 0x17; i++) {
         is31fl3733_write_register(bus, addr, i, 0x00);
     }
+
     // Unlock the command register.
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+
     // Select PG1
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0x00; i <= 0xBF; i++) {
         is31fl3733_write_register(bus, addr, i, 0x00);
     }
+
     // Unlock the command register.
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+
     // Select PG3
-    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
+    // Set de-ghost pull-up resistors (SWx)
+    is31fl3733_write_register(bus, addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
+    // Set de-ghost pull-down resistors (CSx)
+    is31fl3733_write_register(bus, addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
     // Set global current to maximum.
-    is31fl3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+    is31fl3733_write_register(bus, addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
     // Disable software shutdown.
-    is31fl3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
+    is31fl3733_write_register(bus, addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
+
     // Wait 10ms to ensure the device has woken up.
     wait_ms(10);
 }
 
 void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    is31_led led;
     if (index >= 0 && index < RGB_MATRIX_LED_COUNT) {
-        is31_led led = g_is31_leds[index];
+        memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
 
+        if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) {
+            return;
+        }
         g_pwm_buffer[led.driver][led.r]          = red;
         g_pwm_buffer[led.driver][led.g]          = green;
         g_pwm_buffer[led.driver][led.b]          = blue;
@@ -177,7 +205,8 @@ void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
 }
 
 void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
-    is31_led led = g_is31_leds[index];
+    is31_led led;
+    memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
 
     uint8_t control_register_r = led.r / 8;
     uint8_t control_register_g = led.g / 8;
@@ -208,8 +237,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1.
-        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+        is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
@@ -223,14 +252,11 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
         for (int i = 0; i < 24; i++) {
             is31fl3733_write_register(index, addr, i, g_led_control_registers[index][i]);
         }
     }
     g_led_control_registers_update_required[index] = false;
 }
-
-
-#endif
diff --git a/keyboards/input_club/k_type/is31fl3733-dual.h b/keyboards/input_club/k_type/is31fl3733-dual.h
index 1becefbf936..fa58d653c95 100644
--- a/keyboards/input_club/k_type/is31fl3733-dual.h
+++ b/keyboards/input_club/k_type/is31fl3733-dual.h
@@ -47,6 +47,14 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
 void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
 void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
 
+#define IS31FL3733_PUR_0R 0x00   // No PUR resistor
+#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define IS31FL3733_PUR_3KR 0x03  // 3.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_4KR 0x04  // 4.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_8KR 0x05  // 8.0k Ohm resistor on all the time
+#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+
 #define A_1 0x00
 #define A_2 0x01
 #define A_3 0x02
diff --git a/keyboards/input_club/k_type/k_type-rgbdriver.c b/keyboards/input_club/k_type/k_type-rgbdriver.c
index dc5d4abd676..18cdb3cda3d 100644
--- a/keyboards/input_club/k_type/k_type-rgbdriver.c
+++ b/keyboards/input_club/k_type/k_type-rgbdriver.c
@@ -15,11 +15,10 @@
  */
 
 #ifdef RGB_MATRIX_ENABLE
-
-#include "rgb_matrix.h"
-#include "i2c_master.h"
-#include "is31fl3733-dual.h"
-#include "gpio.h"
+#    include "rgb_matrix.h"
+#    include "i2c_master.h"
+#    include "is31fl3733-dual.h"
+#    include "gpio.h"
 
 static void init(void) {
     i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN);
@@ -52,5 +51,4 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
     .set_color = is31fl3733_set_color,
     .set_color_all = is31fl3733_set_color_all,
 };
-
 #endif
diff --git a/keyboards/input_club/k_type/k_type.c b/keyboards/input_club/k_type/k_type.c
index 23a38954086..dc1ca9dc257 100644
--- a/keyboards/input_club/k_type/k_type.c
+++ b/keyboards/input_club/k_type/k_type.c
@@ -18,9 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 #ifdef RGB_MATRIX_ENABLE
-
-#include "is31fl3733-dual.h"
-
+#    include "is31fl3733-dual.h"
 
 const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
     { 0, B_1,  A_1,  C_1  },
@@ -202,15 +200,12 @@ led_config_t g_led_config = {
         2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,
     }
 };
-#endif
-
 
 void keyboard_pre_init_kb(void) {
-#ifdef RGB_MATRIX_ENABLE
     // Turn on LED controller
     setPinOutput(B16);
     writePinHigh(B16);
-#endif
+
     keyboard_pre_init_user();
 }
 
@@ -218,7 +213,6 @@ void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up
 
-#ifdef RGB_MATRIX_ENABLE
     /*
      * Since K20x is stuck with a 32 byte EEPROM (see tmk_core/common/chibios/eeprom_teensy.c),
      * and neither led_matrix_eeconfig.speed or .flags fit in this boundary, just force their values to default on boot.
@@ -228,7 +222,7 @@ void matrix_init_kb(void) {
 #    endif
     rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD),
     rgb_matrix_set_flags(LED_FLAG_ALL);
-#endif
 
     matrix_init_user();
 }
+#endif
diff --git a/keyboards/kbdfans/kbdmini/config.h b/keyboards/kbdfans/kbdmini/config.h
index a3e8408094f..031dd23e5d8 100644
--- a/keyboards/kbdfans/kbdmini/config.h
+++ b/keyboards/kbdfans/kbdmini/config.h
@@ -54,6 +54,6 @@
 // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #define DRIVER_ADDR_1 0b1010000
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 52
 #endif
diff --git a/keyboards/keebwerk/mega/ansi/config.h b/keyboards/keebwerk/mega/ansi/config.h
index c02f298e84c..a9734683f4c 100755
--- a/keyboards/keebwerk/mega/ansi/config.h
+++ b/keyboards/keebwerk/mega/ansi/config.h
@@ -50,7 +50,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 128
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/keychron/q1/config.h b/keyboards/keychron/q1/config.h
index c78453dc5fb..52b53e47d0b 100644
--- a/keyboards/keychron/q1/config.h
+++ b/keyboards/keychron/q1/config.h
@@ -17,7 +17,7 @@
 #pragma once
 
 /* RGB Matrix Driver Configuration */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1011111
 
diff --git a/keyboards/keychron/q1/iso_encoder/config.h b/keyboards/keychron/q1/iso_encoder/config.h
index c1e84e44d35..33916cf8c4a 100644
--- a/keyboards/keychron/q1/iso_encoder/config.h
+++ b/keyboards/keychron/q1/iso_encoder/config.h
@@ -16,14 +16,6 @@
 
 #pragma once
 
-/* DIP switch */
-#define DIP_SWITCH_MATRIX_GRID  { {0,1} }
-
-/* RGB Matrix Driver Configuration */
-#define DRIVER_COUNT 2
-#define DRIVER_ADDR_1 0b1010000
-#define DRIVER_ADDR_2 0b1011111
-
 /* RGB Matrix Configuration */
 #define DRIVER_1_LED_TOTAL 59
 #define DRIVER_2_LED_TOTAL 24
diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/config.h b/keyboards/kprepublic/bm60hsrgb/rev2/config.h
index 82a3a14e9ec..68fba527895 100644
--- a/keyboards/kprepublic/bm60hsrgb/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb/rev2/config.h
@@ -64,7 +64,7 @@
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 63
 //#define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 
diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h
index b7e95393e5e..ce422ff43e6 100644
--- a/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb_ec/rev2/config.h
@@ -19,7 +19,7 @@
 
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 2
+#    define IS31FL3733_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 63
 #    define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 
diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h
index 8ad699ed9a0..f4b463f2618 100644
--- a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h
@@ -27,7 +27,7 @@
 #    define DISABLE_RGB_MATRIX_RAINDROPS
 #    define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define DRIVER_1_LED_TOTAL 64
 
 
diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
index 2c0710bfe48..f3ad3e07811 100644
--- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h
@@ -77,7 +77,7 @@
 // are compiled unconditionally).
 
 // Configure the IS31FL3733 driver for per-key RGB LEDs
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_1_LED_TOTAL 61
 
diff --git a/keyboards/latincompass/latin60rgb/config.h b/keyboards/latincompass/latin60rgb/config.h
index 96e8b75a8e2..053bb2eab80 100644
--- a/keyboards/latincompass/latin60rgb/config.h
+++ b/keyboards/latincompass/latin60rgb/config.h
@@ -68,6 +68,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 60
 #endif
diff --git a/keyboards/miller/gm862/config.h b/keyboards/miller/gm862/config.h
index 4bd9748ab52..6c47183dbfb 100644
--- a/keyboards/miller/gm862/config.h
+++ b/keyboards/miller/gm862/config.h
@@ -54,6 +54,6 @@
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
+#    define IS31FL3733_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 62
 #endif
diff --git a/keyboards/monsgeek/m1/config.h b/keyboards/monsgeek/m1/config.h
index 3e44e815fa0..f5466ab09bc 100644
--- a/keyboards/monsgeek/m1/config.h
+++ b/keyboards/monsgeek/m1/config.h
@@ -37,7 +37,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_OPMODE OPMODE_I2C
diff --git a/keyboards/monsgeek/m5/config.h b/keyboards/monsgeek/m5/config.h
index 6d43bd4f267..db65cef7603 100644
--- a/keyboards/monsgeek/m5/config.h
+++ b/keyboards/monsgeek/m5/config.h
@@ -38,7 +38,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_OPMODE OPMODE_I2C
diff --git a/keyboards/monsgeek/m6/config.h b/keyboards/monsgeek/m6/config.h
index 5fcd897429a..abed72f54e2 100644
--- a/keyboards/monsgeek/m6/config.h
+++ b/keyboards/monsgeek/m6/config.h
@@ -35,7 +35,7 @@
 #define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
 
 /* I2C Config for LED Driver */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define I2C1_SCL_PAL_MODE 4
diff --git a/keyboards/mt/mt64rgb/config.h b/keyboards/mt/mt64rgb/config.h
index 0d877306e31..c15d1aedbcb 100644
--- a/keyboards/mt/mt64rgb/config.h
+++ b/keyboards/mt/mt64rgb/config.h
@@ -24,7 +24,7 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define DRIVER_ADDR_1 0b1010000
 
-#define DRIVER_COUNT 1
+#define IS31FL3733_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 64
 
 
diff --git a/keyboards/novelkeys/nk65/config.h b/keyboards/novelkeys/nk65/config.h
index 1afa3fe95b1..80327af4917 100755
--- a/keyboards/novelkeys/nk65/config.h
+++ b/keyboards/novelkeys/nk65/config.h
@@ -50,7 +50,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 128
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/novelkeys/nk87/config.h b/keyboards/novelkeys/nk87/config.h
index d0e973bb43f..d2949ef6d37 100755
--- a/keyboards/novelkeys/nk87/config.h
+++ b/keyboards/novelkeys/nk87/config.h
@@ -50,7 +50,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 128
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/playkbtw/pk64rgb/config.h b/keyboards/playkbtw/pk64rgb/config.h
index bb28749d943..4ae2454bd14 100644
--- a/keyboards/playkbtw/pk64rgb/config.h
+++ b/keyboards/playkbtw/pk64rgb/config.h
@@ -24,7 +24,7 @@
 	#define RGB_MATRIX_LED_PROCESS_LIMIT 20
 	#define RGB_MATRIX_LED_FLUSH_LIMIT 26
 	#define DRIVER_ADDR_1 0b1010000
-    #define DRIVER_COUNT 1
+    #define IS31FL3733_DRIVER_COUNT 1
 	#define RGB_MATRIX_LED_COUNT 64
 
 
diff --git a/keyboards/redragon/k667/config.h b/keyboards/redragon/k667/config.h
index e17865a4039..90ac3d465fd 100644
--- a/keyboards/redragon/k667/config.h
+++ b/keyboards/redragon/k667/config.h
@@ -20,7 +20,7 @@
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010011
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 45
 #define DRIVER_2_LED_TOTAL 45
 
diff --git a/keyboards/spaceholdings/nebula68/config.h b/keyboards/spaceholdings/nebula68/config.h
index 43dc7b0d868..f6df627592b 100755
--- a/keyboards/spaceholdings/nebula68/config.h
+++ b/keyboards/spaceholdings/nebula68/config.h
@@ -56,7 +56,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 128
 
 // These define which keys in the matrix are alphas/mods
diff --git a/keyboards/teleport/native/config.h b/keyboards/teleport/native/config.h
index 1453bfdc944..705450ed51f 100644
--- a/keyboards/teleport/native/config.h
+++ b/keyboards/teleport/native/config.h
@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 /* RGB Matrix driver config */
-#define DRIVER_COUNT 2
+#define IS31FL3733_DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010011
 #define DRIVER_1_LED_TOTAL 46
diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h
index 488eeade83c..54f68e9aaf6 100644
--- a/keyboards/wilba_tech/wt60_a/config.h
+++ b/keyboards/wilba_tech/wt60_a/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h
index aa75002b4fc..8b30dd6cde0 100644
--- a/keyboards/wilba_tech/wt65_a/config.h
+++ b/keyboards/wilba_tech/wt65_a/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h
index 60cdbe4cc6a..0a2a7526d97 100644
--- a/keyboards/wilba_tech/wt65_b/config.h
+++ b/keyboards/wilba_tech/wt65_b/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h
index 4638b0fba96..e987252e443 100644
--- a/keyboards/wilba_tech/wt75_a/config.h
+++ b/keyboards/wilba_tech/wt75_a/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h
index f519fe66034..9d6dfb95851 100644
--- a/keyboards/wilba_tech/wt75_b/config.h
+++ b/keyboards/wilba_tech/wt75_b/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h
index 7d07822eb6a..c4f91708728 100644
--- a/keyboards/wilba_tech/wt75_c/config.h
+++ b/keyboards/wilba_tech/wt75_c/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96
diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h
index 59cb397a00f..b33d797bdff 100644
--- a/keyboards/wilba_tech/wt80_a/config.h
+++ b/keyboards/wilba_tech/wt80_a/config.h
@@ -61,3 +61,6 @@
 // Backlight config starts after VIA's EEPROM usage,
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
+
+#define IS31FL3736_DRIVER_COUNT 2
+#define RGB_MATRIX_LED_COUNT 96