Solved the problem of not sending codes in RF mode

keyboards/nuphy/air75_v2/ansi/ansi.c

@@ -28,6 +28,7 @@ extern bool f_bat_hold;
 extern uint16_t  no_act_time;
 extern uint8_t   rf_sw_temp;
 extern uint16_t  rf_sw_press_delay;
+extern uint16_t  rf_linking_time;
 extern user_config_t user_config;
 extern DEV_INFO_STRUCT dev_info;
 
@@ -35,6 +36,8 @@ extern DEV_INFO_STRUCT dev_info;
 /* qmk process record */
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     no_act_time = 0;
+    rf_linking_time = 0;
+
     switch (keycode) {
         case RF_DFU:
             if (record->event.pressed) {
@@ -231,6 +234,8 @@ bool rgb_matrix_indicators_user(void)
     if(f_bat_num_show) {
         num_led_show();
     }
+
+    // fix power-on brightness is abnormal
     rgb_matrix_set_color(RGB_MATRIX_LED_COUNT-1, 0, 0, 0);
     return true;
 }
@@ -253,7 +258,7 @@ void housekeeping_task_user(void) {
 
     uart_receive_pro();
 
-    uart_send_report_func();
+    uart_send_report_repeat();
 
     dev_sts_sync();
 

keyboards/nuphy/air75_v2/ansi/rf.c

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "user_kb.h"
 #include "uart.h" // qmk uart.h
 #include "ansi.h"
+#include "rf_driver.h"
 
 USART_MGR_STRUCT Usart_Mgr;
 #define RX_SBYTE    Usart_Mgr.RXDBuf[0]
@@ -39,7 +40,6 @@ uint8_t  uart_bit_report_buf[32] = {0};
 uint8_t  func_tab[32]            = {0};
 uint8_t  bitkb_report_buf[32]    = {0};
 uint8_t  bytekb_report_buf[8]    = {0};
-uint8_t  mouse_report_buf[5]     = {0};
 uint16_t conkb_report            = 0;
 uint16_t syskb_report            = 0;
 uint8_t  sync_lost               = 0;
@@ -64,42 +64,12 @@ void           uart_receive_pro(void);
 void           break_all_key(void);
 uint16_t       host_last_consumer_usage(void);
 
-/**
- * @brief  Uart send consumer keys report.
- * @note Call in host.c
- */
-void uart_send_consumer_report(void) {
-    no_act_time  = 0;
-    conkb_report = host_last_consumer_usage();
-    uart_send_report(CMD_RPT_CONSUME, (uint8_t *)(&conkb_report), 2);
-}
 
-/**
- * @brief  Uart send mouse keys report.
- * @note Call in host.c
- */
-void uart_send_mouse_report(void) {
-    report_mouse_t mouse_report = mousekey_get_report();
-
-    no_act_time = 0;
-    memcpy(mouse_report_buf, &mouse_report.buttons, 5);
-    uart_send_report(CMD_RPT_MS, mouse_report_buf, 5);
-}
-
-/**
- * @brief  Uart send system keys report.
- * @note Call in host.c
- */
-void uart_send_system_report(void) {
-    no_act_time  = 0;
-    syskb_report = host_last_system_usage();
-    uart_send_report(CMD_RPT_SYS, (uint8_t *)(&syskb_report), 2);
-}
 
 /**
  * @brief Uart auto nkey send
  */
-bool f_f_bit_kb_act = 0;
+bool f_bit_kb_act = 0;
 static void uart_auto_nkey_send(uint8_t *pre_bit_report, uint8_t *now_bit_report, uint8_t size)
 {
     uint8_t i, j, byte_index;
@@ -125,8 +95,6 @@ static void uart_auto_nkey_send(uint8_t *pre_bit_report, uint8_t *now_bit_report
                             break;
                         }
                     }
-
-
                     if (byte_index >= 8) {
                         uart_bit_report_buf[i] |= offset_mask;
                         f_bit_send = 1;
@@ -137,7 +105,6 @@ static void uart_auto_nkey_send(uint8_t *pre_bit_report, uint8_t *now_bit_report
                             bytekb_report_buf[byte_index] = 0;
                             f_byte_send                   = 1;
                             break;
-                            ;
                         }
                     }
                     if (byte_index >= 8) {
@@ -152,7 +119,7 @@ static void uart_auto_nkey_send(uint8_t *pre_bit_report, uint8_t *now_bit_report
     }
 
     if (f_bit_send) {
-        f_f_bit_kb_act = 1;
+        f_bit_kb_act = 1;
         uart_send_report(CMD_RPT_BIT_KB, uart_bit_report_buf, 16);
     }
 
@@ -164,43 +131,77 @@ static void uart_auto_nkey_send(uint8_t *pre_bit_report, uint8_t *now_bit_report
 
 /**
  * @brief  Uart send keys report.
- * @note Call in host.c
  */
-void uart_send_report_func(void)
+void uart_send_report_repeat(void)
 {
     static uint32_t interval_timer = 0;
 
     if (dev_info.link_mode == LINK_USB) return;
     keyboard_protocol          = 1;
 
-    if(keymap_config.nkro)
-    nkro_report->mods = get_mods() | get_weak_mods();
-
-    if ((dev_info.sys_sw_state == SYS_SW_MAC) && (memcmp(bytekb_report_buf, &keyboard_report->mods, 8))) {
-        no_act_time             = 0;
-        keyboard_report->reserved = 0;
-        memcpy(bytekb_report_buf, &keyboard_report->mods, 8);
-        uart_send_report(CMD_RPT_BYTE_KB, bytekb_report_buf, 8);
-    }
-    else if ((dev_info.sys_sw_state == SYS_SW_WIN) && (memcmp(bitkb_report_buf, &nkro_report->mods, NKRO_REPORT_BITS+1))) {
-        no_act_time = 0;
-        uart_auto_nkey_send(bitkb_report_buf, &nkro_report->mods, NKRO_REPORT_BITS+1);
-        memcpy(&bitkb_report_buf[0], &nkro_report->mods, NKRO_REPORT_BITS+1);
-    }
-    else if (timer_elapsed32(interval_timer) > 100) {
+    if (timer_elapsed32(interval_timer) > 50) {
         interval_timer = timer_read32();
         if (no_act_time <= 200) {
             uart_send_report(CMD_RPT_BYTE_KB, bytekb_report_buf, 8);
+            wait_us(200);
 
-            if(f_f_bit_kb_act)
+            if(f_bit_kb_act)
             uart_send_report(CMD_RPT_BIT_KB, uart_bit_report_buf, 16);
         }
         else {
-            f_f_bit_kb_act = 0;
+            f_bit_kb_act = 0;
         }
     }
 }
 
+/**
+ * @brief  Uart send consumer keys report.
+ * @note Call in rf_driver.c
+ */
+void uart_send_consumer_report(report_extra_t *report) {
+    no_act_time = 0;
+    uart_send_report(CMD_RPT_CONSUME, (uint8_t *)(&report->usage), 2);
+}
+
+/**
+ * @brief  Uart send mouse keys report.
+ * @note Call in rf_driver.c
+ */
+void uart_send_mouse_report(report_mouse_t *report) {
+    no_act_time = 0;
+    uart_send_report(CMD_RPT_MS, &report->buttons, 5);
+}
+
+/**
+ * @brief  Uart send system keys report.
+ * @note Call in rf_driver.c
+ */
+void uart_send_system_report(report_extra_t *report) {
+    no_act_time = 0;
+    uart_send_report(CMD_RPT_SYS, (uint8_t *)(&report->usage), 2);
+}
+
+/**
+ * @brief  Uart send byte keys report.
+ * @note Call in rf_driver.c
+ */
+void uart_send_report_keyboard(report_keyboard_t *report) {
+    no_act_time      = 0;
+    report->reserved = 0;
+    uart_send_report(CMD_RPT_BYTE_KB, &report->mods, 8);
+    memcpy(bytekb_report_buf, &report->mods, 8);
+}
+
+/**
+ * @brief  Uart send bit keys report.
+ * @note Call in rf_driver.c
+ */
+void uart_send_report_nkro(report_nkro_t *report) {
+    no_act_time = 0;
+    uart_auto_nkey_send(bitkb_report_buf, &nkro_report->mods, NKRO_REPORT_BITS + 1);
+    memcpy(&bitkb_report_buf[0], &nkro_report->mods, NKRO_REPORT_BITS + 1);
+}
+
 /**
  * @brief  Parsing the data received from the RF module.
  */
@@ -468,7 +469,7 @@ void dev_sts_sync(void) {
         if (host_mode != HOST_RF_TYPE) {
             host_mode = HOST_RF_TYPE;
             break_all_key();
-            host_set_driver(0);
+            host_set_driver(&rf_host_driver);
         }
 
         if (dev_info.rf_state != RF_CONNECT) {

keyboards/nuphy/air75_v2/ansi/rf_driver.c

@@ -0,0 +1,48 @@
+#include "host_driver.h"
+#include "rf_driver.h"
+#include "host.h"
+#include "user_kb.h"
+
+/* Variable declaration */
+extern DEV_INFO_STRUCT dev_info;
+
+/* Host driver */
+static uint8_t rf_keyboard_leds(void);
+static void    rf_send_keyboard(report_keyboard_t *report);
+static void    rf_send_nkro(report_nkro_t *report);
+static void    rf_send_mouse(report_mouse_t *report);
+static void    rf_send_extra(report_extra_t *report);
+host_driver_t  rf_host_driver = {rf_keyboard_leds, rf_send_keyboard, rf_send_nkro, rf_send_mouse, rf_send_extra};
+
+/* defined in rf.c */
+extern void uart_send_report_keyboard(report_keyboard_t *report);
+extern void uart_send_report_nkro(report_nkro_t *report);
+extern void uart_send_mouse_report(report_mouse_t *report);
+extern void uart_send_consumer_report(report_extra_t *report);
+extern void uart_send_system_report(report_extra_t *report);
+
+static uint8_t rf_keyboard_leds(void) {
+    return dev_info.rf_led;
+}
+
+static void rf_send_keyboard(report_keyboard_t *report) {
+    keyboard_protocol = 1;
+    uart_send_report_keyboard(report);
+}
+
+static void rf_send_nkro(report_nkro_t *report) {
+    keyboard_protocol = 1;
+    uart_send_report_nkro(report);
+}
+
+static void rf_send_mouse(report_mouse_t *report) {
+    uart_send_mouse_report(report);
+}
+
+static void rf_send_extra(report_extra_t *report) {
+    if (report->report_id == REPORT_ID_CONSUMER) {
+        uart_send_consumer_report(report);
+    } else if (report->report_id == REPORT_ID_SYSTEM) {
+        uart_send_system_report(report);
+    }
+}

keyboards/nuphy/air75_v2/ansi/rf_driver.h

@@ -0,0 +1,3 @@
+#pragma once
+
+extern host_driver_t rf_host_driver;

keyboards/nuphy/air75_v2/ansi/rules.mk

@@ -1,6 +1,7 @@
 SRC += side.c
 SRC += rf.c
 SRC += sleep.c
+SRC += rf_driver.c
 SRC += user_kb.c
 SRC += side_driver.c
 QUANTUM_LIB_SRC += uart.c

keyboards/nuphy/air75_v2/ansi/user_kb.c

@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "user_kb.h"
 #include "ansi.h"
 #include "usb_main.h"
+#include "rf_driver.h"
 
 user_config_t user_config;
 DEV_INFO_STRUCT dev_info = {
@@ -173,18 +174,20 @@ void long_press_key(void) {
  * @brief  Release all keys, clear keyboard report.
  */
 void break_all_key(void) {
-    uint8_t report_buf[16];
+    uint8_t report_buf[NKRO_REPORT_BITS + 1];
     bool    nkro_temp = keymap_config.nkro;
 
     clear_weak_mods();
     clear_mods();
     clear_keyboard();
 
+    // break nkro key
     keymap_config.nkro = 1;
-    memset(keyboard_report, 0, sizeof(report_keyboard_t));
-    host_keyboard_send(keyboard_report);
+    memset(nkro_report, 0, sizeof(report_nkro_t));
+    host_nkro_send(nkro_report);
     wait_ms(10);
 
+    // break byte key
     keymap_config.nkro = 0;
     memset(keyboard_report, 0, sizeof(report_keyboard_t));
     host_keyboard_send(keyboard_report);
@@ -193,7 +196,7 @@ void break_all_key(void) {
     keymap_config.nkro = nkro_temp;
 
     if (dev_info.link_mode != LINK_USB) {
-        memset(report_buf, 0, 16);
+        memset(report_buf, 0, NKRO_REPORT_BITS + 1);
         uart_send_report(CMD_RPT_BIT_KB, report_buf, 16);
         wait_ms(10);
         uart_send_report(CMD_RPT_BYTE_KB, report_buf, 8);
@@ -224,8 +227,7 @@ void switch_dev_link(uint8_t mode) {
         rf_link_show_time = 0;
     } else {
         host_mode = HOST_RF_TYPE;
-
-        host_set_driver(0);
+        host_set_driver(&rf_host_driver);
     }
 }
 
@@ -298,7 +300,7 @@ void dial_sw_scan(void) {
         f_first           = false;
 
         if (dev_info.link_mode != LINK_USB) {
-            host_set_driver(0);
+            host_set_driver(&rf_host_driver);
         }
     }
 }
@@ -378,6 +380,7 @@ void timer_pro(void) {
         m_host_driver  = host_get_driver();
     }
 
+    // step 10ms
     if (timer_elapsed32(interval_timer) < 10)
         return;
     else

keyboards/nuphy/air75_v2/ansi/user_kb.h

@@ -144,7 +144,7 @@ typedef struct
 void    dev_sts_sync(void);
 void    rf_uart_init(void);
 void    rf_device_init(void);
-void    uart_send_report_func(void);
+void    uart_send_report_repeat(void);
 void    uart_receive_pro(void);
 void    uart_send_report(uint8_t report_type, uint8_t *report_buf, uint8_t report_size);
 void    side_speed_contol(uint8_t dir);