mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-22 11:29:26 +00:00
remove unused docs
This commit is contained in:
skullY
skullydazed
parent
5b14456082
commit
d1c0710dec
@ -1,9 +0,0 @@
|
||||
# Becoming a QMK Collaborator
|
||||
|
||||
A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
|
||||
|
||||
* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
|
||||
* **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
|
||||
* **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
|
||||
|
||||
If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!
|
||||
@ -1,9 +0,0 @@
|
||||
# Llegar a ser un colaborador QMK
|
||||
|
||||
Un colaborador QMK es un maker o diseñador de teclados que tiene interés en ayudar a QMK a crecer y mantener sus teclado(s), y alentar a los usuarios y clientes a presentar herramientas, ideas, y keymaps. Siempre procuramos agregar más teclados y colaboradores, pero pedimos que cumplan los siguientes requisitos:
|
||||
|
||||
* **Tener un PCB disponible a la venta.** Desafortunadamente, hay demasiada variación y complicaciones con teclados cableados a mano.
|
||||
* **Realizar el mantenimiento de tu teclado en QMK.** Este podría requirir un setup inicial para hacer que tu teclado funcione, pero también podría incluir adaptarse a cambios hecho al base de QMK que podrían descomponer o rendir código superfluo.
|
||||
* **Aprobar e incorporar pull requests de keymaps para tu teclado.** Nos gusta alentar a los usuarios a contribuir sus keymaps para que otros los vean y los puedan usar para crear sus propios.
|
||||
|
||||
Si sientes que cumples los requisitos, ¡mándanos un email a hello@qmk.fm con una introducción y algunos enlaces para tu teclado!
|
||||
@ -1,11 +0,0 @@
|
||||
<div dir="rtl" markdown="1">
|
||||
# איך להפוך לשותף של QMK
|
||||
|
||||
שותף של QMK הוא יצרן מקלדות או מעצב שמעוניין בלעזור ל-QMK לגדול ולתמוך במקלד(ו)ת שלהם, ולעודד את המשתמשים והצרכנים להוסיף יכולות, רעיונות ומיפויים. אנחנו תמיד מחפשים עוד מקלדות ומשתפי פעולה, אבל אנחנו מבקשים שיעמדו בדרישות הבאות:
|
||||
|
||||
* **קיום לוח PCB למכירה.** לצערינו, יש יותר מידי הסתבכויות ובעיות עם מקלדות המחווטות ידנית.
|
||||
* **תחזוק המקלדת ב-QMK.** זה אולי רק ידרוש הגדרה בסיסית כדי לגרום למקלדת לעבוד, אבל זה גם יכול לכלול התאמה של שינויים בקוד הליבה של QMK שיכול לשבור קוד ייחודי שלכם.
|
||||
* **אישור ומיזוג Pull Requests של מיפויי מקלדת עבור המקלדת** אנחנו רוצים לעודד משתמשים לתרום את מיפויי המקלדת שלהם לאחרים כדי לעזור לאחרים להתחיל ליצור את שלהם.
|
||||
|
||||
אם אתם עומדים בדרישות הללו, שלחו לנו מייל לכתובת hello@qmk.fm עם מבוא וקישורים עבור המקלדת שלכם.
|
||||
</div>
|
||||
@ -1,82 +0,0 @@
|
||||
Setting up your ARM based PCB is a little more involved than an Atmel MCU, but is easy enough. Start by running `util/new_keyboard.sh`:
|
||||
|
||||
```
|
||||
$ ./util/new_keyboard.sh
|
||||
Generating a new QMK keyboard directory
|
||||
|
||||
Keyboard Name: mycoolkb
|
||||
Keyboard Type [avr]:
|
||||
Your Name [John Smith]:
|
||||
|
||||
Copying base template files... done
|
||||
Copying avr template files... done
|
||||
Renaming keyboard files... done
|
||||
Replacing %KEYBOARD% with mycoolkb... done
|
||||
Replacing %YOUR_NAME% with John Smith... done
|
||||
|
||||
Created a new keyboard called mycoolkb.
|
||||
|
||||
To start working on things, cd into keyboards/mycoolkb,
|
||||
or open the directory in your favourite text editor.
|
||||
```
|
||||
|
||||
# END OF NEW ARM DOC, OLD ATMEL DOC FOLLOWS
|
||||
|
||||
## `/keyboards/<keyboard>/config.h`
|
||||
|
||||
The `USB Device descriptor parameter` block contains parameters are used to uniquely identify your keyboard, but they don't really matter to the machine.
|
||||
|
||||
Your `MATRIX_ROWS` and `MATRIX_COLS` are the numbers of rows and cols in your keyboard matrix - this may be different than the number of actual rows and columns on your keyboard. There are some tricks you can pull to increase the number of keys in a given matrix, but most keyboards are pretty straight-forward.
|
||||
|
||||
The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each row/column. Your schematic (if you have one) will have this information on it, and the values will vary depending on your setup. This is one of the most important things to double-check in getting your keyboard setup correctly.
|
||||
|
||||
For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect.
|
||||
|
||||
To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
|
||||
|
||||
`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to.
|
||||
|
||||
`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
|
||||
|
||||
`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 31, and they are computed automatically from this number.
|
||||
|
||||
## `/keyboards/<keyboard>/Makefile`
|
||||
|
||||
The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`.
|
||||
|
||||
```
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
```
|
||||
|
||||
At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documentation of these features, see the [Makefile options](#makefile-options).
|
||||
|
||||
## `/keyboards/<keyboard>/readme.md`
|
||||
|
||||
This is where you'll describe your keyboard - please write as much as you can about it! Talking about default functionality/features is useful here. Feel free to link to external pages/sites if necessary. Images can be included here as well. This file will be rendered into a webpage at qmk.fm/keyboards/<keyboard>/.
|
||||
|
||||
## `/keyboards/<keyboard>/<keyboard>.c`
|
||||
|
||||
This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps)
|
||||
|
||||
## `/keyboards/<keyboard>/<keyboard>.h`
|
||||
|
||||
Here is where you can (optionally) define your `LAYOUT` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accommodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design:
|
||||
|
||||
```
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, \
|
||||
k10, k11 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02 }, \
|
||||
{ k10, KC_NO, k11 }, \
|
||||
}
|
||||
```
|
||||
|
||||
Each of the `kxx` variables needs to be unique, and usually follows the format `k<row><col>`. You can place `KC_NO` where your dead keys are in your matrix.
|
||||
@ -1,9 +0,0 @@
|
||||
# Стать соавтором QMK
|
||||
|
||||
Соавтор QMK - это производитель или разработчик клавиатуры, который заинтересован в том, чтобы помочь QMK вырасти. Для этого он полностью поддерживает свои клавиатуры, поощряет пользователей и клиентов создавать новый функционал, идеи и раскладки клавиатур. Мы всегда стремимся добавлять больше клавиатур и соавторов, но нам важно, чтобы они соответствовали следующим требованиям:
|
||||
|
||||
* **Иметь печатную плату на продажу.** К сожалению, у собранных вручную клавиатур слишком много вариаций и сложностей.
|
||||
* **Поддерживать вашу клавиатуру в QMK.** Это может потребовать просто начальной настройки, чтобы ваша клавиатура заработала. Но поддержка также может заключаться в адаптации изменений ядра QMK, которые способны сломать или сделать избыточным любой пользовательский код.
|
||||
* **Одобрять и производить слияние пулреквестов для вашей клавиатуры.** Мы призываем пользователей делиться своими раскладками клавиатур, чтобы другие могли их видеть и опираться на них при создании своих собственных.
|
||||
|
||||
Если вы чувствуете, что удовлетворяете этим требованиям, напишите нам письмо по адресу hello@qmk.fm с кратким описанием и ссылками на вашу клавиатуру!
|
||||
Loading…
Reference in New Issue
Block a user