diff --git a/keyboards/test_k15r2/config.h b/keyboards/test_k15r2/config.h new file mode 100644 index 00000000000..fa94dc64560 --- /dev/null +++ b/keyboards/test_k15r2/config.h @@ -0,0 +1,264 @@ +/* +Copyright 2020 Takeshi Nishio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Takeshi Nishio +#define PRODUCT test_k15r2 +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +//#define MATRIX_ROWS 6*2 +#define MATRIX_ROWS 3 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +//#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 } +#define MATRIX_ROW_PINS { F6, F7, B1} +//#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5, F4, F5 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, D7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Encorders */ +#define ENCODERS_PAD_A { B6, B5 } +#define ENCODERS_PAD_B { B2, B4 } +#define ENCODER_RESOLUTION 4 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 8 + #define RGBLIGHT_HUE_STEP 10 + #define RGBLIGHT_SAT_STEP 17 + #define RGBLIGHT_VAL_STEP 17 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +//#define DEBOUNCE 5 +#define DEBOUNCING_DELAY 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#ifndef LINK_TIME_OPTIMIZATION_ENABLE + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION +#endif +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +/* Serial settings */ +#define USE_SERIAL +#define RGBLED_SPLIT {8,8} diff --git a/keyboards/test_k15r2/info.json b/keyboards/test_k15r2/info.json new file mode 100644 index 00000000000..2b4623b0ce2 --- /dev/null +++ b/keyboards/test_k15r2/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "test_k15r2", + "url": "", + "maintainer": "Takeshi Nishio", + "width": 3, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k12", "x":1.5, "y":1, "w":1.5} + ] + } + } +} diff --git a/keyboards/test_k15r2/keymaps/default/config.h b/keyboards/test_k15r2/keymaps/default/config.h new file mode 100644 index 00000000000..6f70f09beec --- /dev/null +++ b/keyboards/test_k15r2/keymaps/default/config.h @@ -0,0 +1 @@ +#pragma once diff --git a/keyboards/test_k15r2/keymaps/default/keymap.c b/keyboards/test_k15r2/keymaps/default/keymap.c new file mode 100644 index 00000000000..a1a236e1457 --- /dev/null +++ b/keyboards/test_k15r2/keymaps/default/keymap.c @@ -0,0 +1,228 @@ +/* Copyright 2019 e3w2q + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + SEND_A1 = SAFE_RANGE, + SEND_B1, SEND_C1, SEND_D1, SEND_E1, SEND_F1, SEND_G1, SEND_H1, SEND_I1, SEND_J1, + SEND_A2, SEND_B2, SEND_C2, SEND_D2, SEND_E2, SEND_F2, SEND_G2, SEND_H2, SEND_I2, SEND_J2, + SEND_A3, SEND_B3, SEND_C3, SEND_D3, SEND_E3, SEND_F3, SEND_G3, SEND_H3, SEND_I3, SEND_J3, + SEND_A4, SEND_B4, SEND_C4, SEND_D4, SEND_E4, SEND_F4, SEND_G4, SEND_H4, SEND_I4, SEND_J4, + SEND_A5, SEND_B5, SEND_C5, SEND_D5, SEND_E5, SEND_F5, SEND_G5, SEND_H5, SEND_I5, SEND_J5, + SEND_A6, SEND_B6, SEND_C6, SEND_D6, SEND_E6, SEND_F6, SEND_G6, SEND_H6, SEND_I6, SEND_J6, + + SEND_SA1, SEND_SB1, SEND_SC1, SEND_SD1, SEND_SE1, SEND_SF1, SEND_SG1, SEND_SH1, SEND_SI1, SEND_SJ1, + SEND_SA2, SEND_SB2, SEND_SC2, SEND_SD2, SEND_SE2, SEND_SF2, SEND_SG2, SEND_SH2, SEND_SI2, SEND_SJ2, + SEND_SA3, SEND_SB3, SEND_SC3, SEND_SD3, SEND_SE3, SEND_SF3, SEND_SG3, SEND_SH3, SEND_SI3, SEND_SJ3, + SEND_SA4, SEND_SB4, SEND_SC4, SEND_SD4, SEND_SE4, SEND_SF4, SEND_SG4, SEND_SH4, SEND_SI4, SEND_SJ4, + SEND_SA5, SEND_SB5, SEND_SC5, SEND_SD5, SEND_SE5, SEND_SF5, SEND_SG5, SEND_SH5, SEND_SI5, SEND_SJ5, + SEND_SA6, SEND_SB6, SEND_SC6, SEND_SD6, SEND_SE6, SEND_SF6, SEND_SG6, SEND_SH6, SEND_SI6, SEND_SJ6 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Default Layer + * Master Side (USB Cable Connected Side) + * ,--------------------------------------------------- + * | A1 B1 C1 D1 E1 F1 G1 H1 I1 J1 + * | A2 B2 C2 D2 E2 F2 G2 H2 I2 J2 + * | A3 B3 C3 D3 E3 F3 G3 H3 I3 J3 + * | A4 B4 C4 D4 E4 F4 G4 H4 I4 J4 + * | A5 B5 C5 D5 E5 F5 G5 H5 I5 J5 + * | A6 B6 C6 D6 E6 F6 G6 H6 I6 J6 + * `--------------------------------------------------- + * Slave Side (USB Cable Not Connected Side) + * ,--------------------------------------------------- + * | SA1 SB1 SC1 SD1 SE1 SF1 SG1 SH1 SI1 SJ1 + * | SA2 SB2 SC2 SD2 SE2 SF2 SG2 SH2 SI2 SJ2 + * | SA3 SB3 SC3 SD3 SE3 SF3 SG3 SH3 SI3 SJ3 + * | SA4 SB4 SC4 SD4 SE4 SF4 SG4 SH4 SI4 SJ4 + * | SA5 SB5 SC5 SD5 SE5 SF5 SG5 SH5 SI5 SJ5 + * | SA6 SB6 SC6 SD6 SE6 SF6 SG6 SH6 SI6 SJ6 + * `--------------------------------------------------- + */ + + [0] = LAYOUT( /* Base */ + SEND_A1, SEND_B1, SEND_C1, SEND_D1, SEND_E1, SEND_F1, SEND_G1, SEND_H1, SEND_I1, SEND_J1, + SEND_A2, SEND_B2, SEND_C2, SEND_D2, SEND_E2, SEND_F2, SEND_G2, SEND_H2, SEND_I2, SEND_J2, + SEND_A3, SEND_B3, SEND_C3, SEND_D3, SEND_E3, SEND_F3, SEND_G3, SEND_H3, SEND_I3, SEND_J3, + SEND_A4, SEND_B4, SEND_C4, SEND_D4, SEND_E4, SEND_F4, SEND_G4, SEND_H4, SEND_I4, SEND_J4, + SEND_A5, SEND_B5, SEND_C5, SEND_D5, SEND_E5, SEND_F5, SEND_G5, SEND_H5, SEND_I5, SEND_J5, + SEND_A6, SEND_B6, SEND_C6, SEND_D6, SEND_E6, SEND_F6, SEND_G6, SEND_H6, SEND_I6, SEND_J6, + + SEND_SA1, SEND_SB1, SEND_SC1, SEND_SD1, SEND_SE1, SEND_SF1, SEND_SG1, SEND_SH1, SEND_SI1, SEND_SJ1, + SEND_SA2, SEND_SB2, SEND_SC2, SEND_SD2, SEND_SE2, SEND_SF2, SEND_SG2, SEND_SH2, SEND_SI2, SEND_SJ2, + SEND_SA3, SEND_SB3, SEND_SC3, SEND_SD3, SEND_SE3, SEND_SF3, SEND_SG3, SEND_SH3, SEND_SI3, SEND_SJ3, + SEND_SA4, SEND_SB4, SEND_SC4, SEND_SD4, SEND_SE4, SEND_SF4, SEND_SG4, SEND_SH4, SEND_SI4, SEND_SJ4, + SEND_SA5, SEND_SB5, SEND_SC5, SEND_SD5, SEND_SE5, SEND_SF5, SEND_SG5, SEND_SH5, SEND_SI5, SEND_SJ5, + SEND_SA6, SEND_SB6, SEND_SC6, SEND_SD6, SEND_SE6, SEND_SF6, SEND_SG6, SEND_SH6, SEND_SI6, SEND_SJ6 + ), + + [1] = LAYOUT( + RGB_TOG, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, + + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SEND_A1: if (record->event.pressed) SEND_STRING("A1"); break; + case SEND_B1: if (record->event.pressed) SEND_STRING("B1"); break; + case SEND_C1: if (record->event.pressed) SEND_STRING("C1"); break; + case SEND_D1: if (record->event.pressed) SEND_STRING("D1"); break; + case SEND_E1: if (record->event.pressed) SEND_STRING("E1"); break; + case SEND_F1: if (record->event.pressed) SEND_STRING("F1"); break; + case SEND_G1: if (record->event.pressed) SEND_STRING("G1"); break; + case SEND_H1: if (record->event.pressed) SEND_STRING("H1"); break; + case SEND_I1: if (record->event.pressed) SEND_STRING("I1"); break; + case SEND_J1: if (record->event.pressed) SEND_STRING("J1"); break; + case SEND_A2: if (record->event.pressed) SEND_STRING("A2"); break; + case SEND_B2: if (record->event.pressed) SEND_STRING("B2"); break; + case SEND_C2: if (record->event.pressed) SEND_STRING("C2"); break; + case SEND_D2: if (record->event.pressed) SEND_STRING("D2"); break; + case SEND_E2: if (record->event.pressed) SEND_STRING("E2"); break; + case SEND_F2: if (record->event.pressed) SEND_STRING("F2"); break; + case SEND_G2: if (record->event.pressed) SEND_STRING("G2"); break; + case SEND_H2: if (record->event.pressed) SEND_STRING("H2"); break; + case SEND_I2: if (record->event.pressed) SEND_STRING("I2"); break; + case SEND_J2: if (record->event.pressed) SEND_STRING("J2"); break; + case SEND_A3: if (record->event.pressed) SEND_STRING("A3"); break; + case SEND_B3: if (record->event.pressed) SEND_STRING("B3"); break; + case SEND_C3: if (record->event.pressed) SEND_STRING("C3"); break; + case SEND_D3: if (record->event.pressed) SEND_STRING("D3"); break; + case SEND_E3: if (record->event.pressed) SEND_STRING("E3"); break; + case SEND_F3: if (record->event.pressed) SEND_STRING("F3"); break; + case SEND_G3: if (record->event.pressed) SEND_STRING("G3"); break; + case SEND_H3: if (record->event.pressed) SEND_STRING("H3"); break; + case SEND_I3: if (record->event.pressed) SEND_STRING("I3"); break; + case SEND_J3: if (record->event.pressed) SEND_STRING("J3"); break; + case SEND_A4: if (record->event.pressed) SEND_STRING("A4"); break; + case SEND_B4: if (record->event.pressed) SEND_STRING("B4"); break; + case SEND_C4: if (record->event.pressed) SEND_STRING("C4"); break; + case SEND_D4: if (record->event.pressed) SEND_STRING("D4"); break; + case SEND_E4: if (record->event.pressed) SEND_STRING("E4"); break; + case SEND_F4: if (record->event.pressed) SEND_STRING("F4"); break; + case SEND_G4: if (record->event.pressed) SEND_STRING("G4"); break; + case SEND_H4: if (record->event.pressed) SEND_STRING("H4"); break; + case SEND_I4: if (record->event.pressed) SEND_STRING("I4"); break; + case SEND_J4: if (record->event.pressed) SEND_STRING("J4"); break; + case SEND_A5: if (record->event.pressed) SEND_STRING("A5"); break; + case SEND_B5: if (record->event.pressed) SEND_STRING("B5"); break; + case SEND_C5: if (record->event.pressed) SEND_STRING("C5"); break; + case SEND_D5: if (record->event.pressed) SEND_STRING("D5"); break; + case SEND_E5: if (record->event.pressed) SEND_STRING("E5"); break; + case SEND_F5: if (record->event.pressed) SEND_STRING("F5"); break; + case SEND_G5: if (record->event.pressed) SEND_STRING("G5"); break; + case SEND_H5: if (record->event.pressed) SEND_STRING("H5"); break; + case SEND_I5: if (record->event.pressed) SEND_STRING("I5"); break; + case SEND_J5: if (record->event.pressed) SEND_STRING("J5"); break; + case SEND_A6: if (record->event.pressed) SEND_STRING("A6"); break; + case SEND_B6: if (record->event.pressed) SEND_STRING("B6"); break; + case SEND_C6: if (record->event.pressed) SEND_STRING("C6"); break; + case SEND_D6: if (record->event.pressed) SEND_STRING("D6"); break; + case SEND_E6: if (record->event.pressed) SEND_STRING("E6"); break; + case SEND_F6: if (record->event.pressed) SEND_STRING("F6"); break; + case SEND_G6: if (record->event.pressed) SEND_STRING("G6"); break; + case SEND_H6: if (record->event.pressed) SEND_STRING("H6"); break; + case SEND_I6: if (record->event.pressed) SEND_STRING("I6"); break; + case SEND_J6: if (record->event.pressed) SEND_STRING("J6"); break; + case SEND_SA1: if (record->event.pressed) SEND_STRING("SA1"); break; + case SEND_SB1: if (record->event.pressed) SEND_STRING("SB1"); break; + case SEND_SC1: if (record->event.pressed) SEND_STRING("SC1"); break; + case SEND_SD1: if (record->event.pressed) SEND_STRING("SD1"); break; + case SEND_SE1: if (record->event.pressed) SEND_STRING("SE1"); break; + case SEND_SF1: if (record->event.pressed) SEND_STRING("SF1"); break; + case SEND_SG1: if (record->event.pressed) SEND_STRING("SG1"); break; + case SEND_SH1: if (record->event.pressed) SEND_STRING("SH1"); break; + case SEND_SI1: if (record->event.pressed) SEND_STRING("SI1"); break; + case SEND_SJ1: if (record->event.pressed) SEND_STRING("SJ1"); break; + case SEND_SA2: if (record->event.pressed) SEND_STRING("SA2"); break; + case SEND_SB2: if (record->event.pressed) SEND_STRING("SB2"); break; + case SEND_SC2: if (record->event.pressed) SEND_STRING("SC2"); break; + case SEND_SD2: if (record->event.pressed) SEND_STRING("SD2"); break; + case SEND_SE2: if (record->event.pressed) SEND_STRING("SE2"); break; + case SEND_SF2: if (record->event.pressed) SEND_STRING("SF2"); break; + case SEND_SG2: if (record->event.pressed) SEND_STRING("SG2"); break; + case SEND_SH2: if (record->event.pressed) SEND_STRING("SH2"); break; + case SEND_SI2: if (record->event.pressed) SEND_STRING("SI2"); break; + case SEND_SJ2: if (record->event.pressed) SEND_STRING("SJ2"); break; + case SEND_SA3: if (record->event.pressed) SEND_STRING("SA3"); break; + case SEND_SB3: if (record->event.pressed) SEND_STRING("SB3"); break; + case SEND_SC3: if (record->event.pressed) SEND_STRING("SC3"); break; + case SEND_SD3: if (record->event.pressed) SEND_STRING("SD3"); break; + case SEND_SE3: if (record->event.pressed) SEND_STRING("SE3"); break; + case SEND_SF3: if (record->event.pressed) SEND_STRING("SF3"); break; + case SEND_SG3: if (record->event.pressed) SEND_STRING("SG3"); break; + case SEND_SH3: if (record->event.pressed) SEND_STRING("SH3"); break; + case SEND_SI3: if (record->event.pressed) SEND_STRING("SI3"); break; + case SEND_SJ3: if (record->event.pressed) SEND_STRING("SJ3"); break; + case SEND_SA4: if (record->event.pressed) SEND_STRING("SA4"); break; + case SEND_SB4: if (record->event.pressed) SEND_STRING("SB4"); break; + case SEND_SC4: if (record->event.pressed) SEND_STRING("SC4"); break; + case SEND_SD4: if (record->event.pressed) SEND_STRING("SD4"); break; + case SEND_SE4: if (record->event.pressed) SEND_STRING("SE4"); break; + case SEND_SF4: if (record->event.pressed) SEND_STRING("SF4"); break; + case SEND_SG4: if (record->event.pressed) SEND_STRING("SG4"); break; + case SEND_SH4: if (record->event.pressed) SEND_STRING("SH4"); break; + case SEND_SI4: if (record->event.pressed) SEND_STRING("SI4"); break; + case SEND_SJ4: if (record->event.pressed) SEND_STRING("SJ4"); break; + case SEND_SA5: if (record->event.pressed) SEND_STRING("SA5"); break; + case SEND_SB5: if (record->event.pressed) SEND_STRING("SB5"); break; + case SEND_SC5: if (record->event.pressed) SEND_STRING("SC5"); break; + case SEND_SD5: if (record->event.pressed) SEND_STRING("SD5"); break; + case SEND_SE5: if (record->event.pressed) SEND_STRING("SE5"); break; + case SEND_SF5: if (record->event.pressed) SEND_STRING("SF5"); break; + case SEND_SG5: if (record->event.pressed) SEND_STRING("SG5"); break; + case SEND_SH5: if (record->event.pressed) SEND_STRING("SH5"); break; + case SEND_SI5: if (record->event.pressed) SEND_STRING("SI5"); break; + case SEND_SJ5: if (record->event.pressed) SEND_STRING("SJ5"); break; + case SEND_SA6: if (record->event.pressed) SEND_STRING("SA6"); break; + case SEND_SB6: if (record->event.pressed) SEND_STRING("SB6"); break; + case SEND_SC6: if (record->event.pressed) SEND_STRING("SC6"); break; + case SEND_SD6: if (record->event.pressed) SEND_STRING("SD6"); break; + case SEND_SE6: if (record->event.pressed) SEND_STRING("SE6"); break; + case SEND_SF6: if (record->event.pressed) SEND_STRING("SF6"); break; + case SEND_SG6: if (record->event.pressed) SEND_STRING("SG6"); break; + case SEND_SH6: if (record->event.pressed) SEND_STRING("SH6"); break; + case SEND_SI6: if (record->event.pressed) SEND_STRING("SI6"); break; + case SEND_SJ6: if (record->event.pressed) SEND_STRING("SJ6"); break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/test_k15r2/keymaps/default_org/config.h b/keyboards/test_k15r2/keymaps/default_org/config.h new file mode 100644 index 00000000000..b4139651f5f --- /dev/null +++ b/keyboards/test_k15r2/keymaps/default_org/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Takeshi Nishio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/test_k15r2/keymaps/default_org/keymap.c b/keyboards/test_k15r2/keymaps/default_org/keymap.c new file mode 100644 index 00000000000..1ac5a5a3d6f --- /dev/null +++ b/keyboards/test_k15r2/keymaps/default_org/keymap.c @@ -0,0 +1,76 @@ +/* Copyright 2020 Takeshi Nishio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_A, KC_1, MO(_FN), + KC_TAB, KC_SPC + ), + [_FN] = LAYOUT( + QMKBEST, QMKURL, _______, + RESET, XXXXXXX + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +/* +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool led_update_user(led_t led_state) { + return true; +} +*/ diff --git a/keyboards/test_k15r2/keymaps/default_org/readme.md b/keyboards/test_k15r2/keymaps/default_org/readme.md new file mode 100644 index 00000000000..a2f1ca1091c --- /dev/null +++ b/keyboards/test_k15r2/keymaps/default_org/readme.md @@ -0,0 +1 @@ +# The default keymap for test_k15r2 diff --git a/keyboards/test_k15r2/keymaps/encorder/config.h b/keyboards/test_k15r2/keymaps/encorder/config.h new file mode 100644 index 00000000000..6f70f09beec --- /dev/null +++ b/keyboards/test_k15r2/keymaps/encorder/config.h @@ -0,0 +1 @@ +#pragma once diff --git a/keyboards/test_k15r2/keymaps/encorder/keymap.c b/keyboards/test_k15r2/keymaps/encorder/keymap.c new file mode 100644 index 00000000000..16252747e98 --- /dev/null +++ b/keyboards/test_k15r2/keymaps/encorder/keymap.c @@ -0,0 +1,111 @@ +/* Copyright 2019 e3w2q + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + SEND_A1 = SAFE_RANGE, + SEND_B1, SEND_C1, SEND_D1, SEND_E1, + SEND_A2, SEND_B2, SEND_C2, SEND_D2, SEND_E2, + SEND_A3, SEND_B3, SEND_C3, SEND_D3, SEND_E3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Default Layer + * Master Side (USB Cable Connected Side) + * ,--------------------------------------------------- + * | A1 B1 C1 D1 E1 F1 G1 H1 I1 J1 + * | A2 B2 C2 D2 E2 F2 G2 H2 I2 J2 + * | A3 B3 C3 D3 E3 F3 G3 H3 I3 J3 + * | A4 B4 C4 D4 E4 F4 G4 H4 I4 J4 + * | A5 B5 C5 D5 E5 F5 G5 H5 I5 J5 + * | A6 B6 C6 D6 E6 F6 G6 H6 I6 J6 + * `--------------------------------------------------- + * Slave Side (USB Cable Not Connected Side) + * ,--------------------------------------------------- + * | SA1 SB1 SC1 SD1 SE1 SF1 SG1 SH1 SI1 SJ1 + * | SA2 SB2 SC2 SD2 SE2 SF2 SG2 SH2 SI2 SJ2 + * | SA3 SB3 SC3 SD3 SE3 SF3 SG3 SH3 SI3 SJ3 + * | SA4 SB4 SC4 SD4 SE4 SF4 SG4 SH4 SI4 SJ4 + * | SA5 SB5 SC5 SD5 SE5 SF5 SG5 SH5 SI5 SJ5 + * | SA6 SB6 SC6 SD6 SE6 SF6 SG6 SH6 SI6 SJ6 + * `--------------------------------------------------- + */ + + [0] = LAYOUT( /* Base */ + SEND_A1, SEND_B1, SEND_C1, SEND_D1, SEND_E1, + SEND_A2, SEND_B2, SEND_C2, SEND_D2, SEND_E2, + SEND_A3, SEND_B3, SEND_C3, SEND_D3, SEND_E3 + ), + + [1] = LAYOUT( + RGB_TOG, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, + RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, RESET + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SEND_A1: if (record->event.pressed) SEND_STRING("A1"); break; + case SEND_B1: if (record->event.pressed) SEND_STRING("B1"); break; + case SEND_C1: if (record->event.pressed) SEND_STRING("C1"); break; + case SEND_D1: if (record->event.pressed) SEND_STRING("D1"); break; + case SEND_E1: if (record->event.pressed) SEND_STRING("E1"); break; + case SEND_A2: if (record->event.pressed) SEND_STRING("A2"); break; + case SEND_B2: if (record->event.pressed) SEND_STRING("B2"); break; + case SEND_C2: if (record->event.pressed) SEND_STRING("C2"); break; + case SEND_D2: if (record->event.pressed) SEND_STRING("D2"); break; + case SEND_E2: if (record->event.pressed) SEND_STRING("E2"); break; + case SEND_A3: if (record->event.pressed) SEND_STRING("A3"); break; + case SEND_B3: if (record->event.pressed) SEND_STRING("B3"); break; + case SEND_C3: if (record->event.pressed) SEND_STRING("C3"); break; + case SEND_D3: if (record->event.pressed) SEND_STRING("D3"); break; + case SEND_E3: if (record->event.pressed) SEND_STRING("E3"); break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + SEND_STRING("ENC0+"); + // tap_code(KC_VOLD); + } else { + SEND_STRING("ENC0-"); + // tap_code(KC_VOLU); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + SEND_STRING("ENC1+"); + } else { + SEND_STRING("ENC1-"); + } + } +} diff --git a/keyboards/test_k15r2/readme.md b/keyboards/test_k15r2/readme.md new file mode 100644 index 00000000000..7aadb6cdb21 --- /dev/null +++ b/keyboards/test_k15r2/readme.md @@ -0,0 +1,15 @@ +# test_k15r2 + +![test_k15r2](imgur.com image replace me!) + +A short description of the keyboard/project + +* Keyboard Maintainer: [Takeshi Nishio](https://github.com/yourusername) +* Hardware Supported: The PCBs, controllers supported +* Hardware Availability: Links to where you can find this hardware + +Make example for this keyboard (after setting up your build environment): + + make test_k15r2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/test_k15r2/rules.mk b/keyboards/test_k15r2/rules.mk new file mode 100644 index 00000000000..37bf0ad1020 --- /dev/null +++ b/keyboards/test_k15r2/rules.mk @@ -0,0 +1,43 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Otherwise, delete this section +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +ENCODER_ENABLE = yes diff --git a/keyboards/test_k15r2/test_k15r2.c b/keyboards/test_k15r2/test_k15r2.c new file mode 100644 index 00000000000..09e91eb6705 --- /dev/null +++ b/keyboards/test_k15r2/test_k15r2.c @@ -0,0 +1,50 @@ +/* Copyright 2020 Takeshi Nishio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "test_k15r2.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +bool led_update_kb(led_t led_state) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + return led_update_user(led_state); +} +*/ diff --git a/keyboards/test_k15r2/test_k15r2.h b/keyboards/test_k15r2/test_k15r2.h new file mode 100644 index 00000000000..7be881602b8 --- /dev/null +++ b/keyboards/test_k15r2/test_k15r2.h @@ -0,0 +1,68 @@ +/* Copyright 2020 Takeshi Nishio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + /* + #define LAYOUT( \ + l00, l01, l02, l03, l04, l05, l06, l07, l08, l09, \ + l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, \ + l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, \ + l30, l31, l32, l33, l34, l35, l36, l37, l38, l39, \ + l40, l41, l42, l43, l44, l45, l46, l47, l48, l49, \ + l50, l51, l52, l53, l54, l55, l56, l57, l58, l59, \ + r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \ + r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \ + r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \ + r30, r31, r32, r33, r34, r35, r36, r37, r38, r39, \ + r40, r41, r42, r43, r44, r45, r46, r47, r48, r49, \ + r50, r51, r52, r53, r54, r55, r56, r57, r58, r59 \ + ) \ + { \ + { l00, l01, l02, l03, l04, l05, l06, l07, l08, l09 }, \ + { l10, l11, l12, l13, l14, l15, l16, l17, l18, l19 }, \ + { l20, l21, l22, l23, l24, l25, l26, l27, l28, l29 }, \ + { l30, l31, l32, l33, l34, l35, l36, l37, l38, l39 }, \ + { l40, l41, l42, l43, l44, l45, l46, l47, l48, l49 }, \ + { l50, l51, l52, l53, l54, l55, l56, l57, l58, l59 }, \ + { r00, r01, r02, r03, r04, r05, r06, r07, r08, r09 }, \ + { r10, r11, r12, r13, r14, r15, r16, r17, r18, r19 }, \ + { r20, r21, r22, r23, r24, r25, r26, r27, r28, r29 }, \ + { r30, r31, r32, r33, r34, r35, r36, r37, r38, r39 }, \ + { r40, r41, r42, r43, r44, r45, r46, r47, r48, r49 }, \ + { r50, r51, r52, r53, r54, r55, r56, r57, r58, r59 } \ + } +*/ + #define LAYOUT( \ + l00, l01, l02, l03, l04, \ + l10, l11, l12, l13, l14, \ + l20, l21, l22, l23, l24 \ + ) \ + { \ + { l00, l01, l02, l03, l04, }, \ + { l10, l11, l12, l13, l14, }, \ + { l20, l21, l22, l23, l24 } \ + }