Add a readme

keyboards/spv1/readme.md

@@ -0,0 +1,43 @@
+# SPV1 keyboard QMK firmware
+
+![spv1](https://imgur.com/C2tNDzY.jpg)
+
+SPV1 is a southpaw 75% with numpad designed by Bisoromi and sold through CannonKeys.
+
+* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim);
+* Hardware Supported: proprietary PCB using STM32F401 microcontroller;
+* Hardware Availability: the groupbuy of the SPV1 ran in february 2023.
+
+## Flashing instructions 
+
+### Step 1: enter bootloader
+
+The DFU state in the bootloader can be accessed in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: press the physical button on the back of the PCB for at least five seconds
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
+
+### Step 2: compile firmware
+
+After accessing the DFU state in your PCB, build the default layout using:
+
+    make spv1:default
+
+### Step 3: flashing
+
+You can use a flashing tool like `dfu-util` or QMK Toolbox to download the resulting `*.bin` file into your PCB.
+
+### (Alternative) Compile and flash
+
+After accessing the DFU state in your PCB, you can compile-and-flash automatically using `dfu-util` through
+
+    make spv1:default:flash
+
+### VIA firmware
+
+When compiling, just substitute `default` for `via`.
+
+## Additional info
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).