Change 基板バージョンごとにサブフォルダを作成するようにした。

keyboards/jones/rules.mk

@@ -1,33 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-#BOOTLOADER = caterina
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+DEFAULT_FOLDER = jones/v.0.1

keyboards/jones/v.0.1/config.h

@@ -60,14 +60,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 2
-  #define RGBLIGHT_HUE_STEP 8
-  #define RGBLIGHT_SAT_STEP 8
-  #define RGBLIGHT_VAL_STEP 8
-  #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
-  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_HUE_STEP 10
+  #define RGBLIGHT_SAT_STEP 10
+  #define RGBLIGHT_VAL_STEP 10
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  // #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 /*== Lighting Layers ==*/
-  #define RGBLIGHT_MAX_LAYERS 2
-  #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF // Overriding RGB Lighting on/off status
+  // #define RGBLIGHT_MAX_LAYERS 2
+  // #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF // Overriding RGB Lighting on/off status
 /*== all animations enable ==*/
   // #define RGBLIGHT_ANIMATIONS
 /*== or choose animations ==*/

keyboards/jones/v.0.1/keymaps/default/keymap.c

@@ -217,25 +217,25 @@ switch (keycode) {
 }
 
 // レイヤー切り替えにともなって、インジケータLEDを発光
-// layer_state_t layer_state_set_user(layer_state_t state) {
-//   #ifdef RGBLIGHT_ENABLE
-//     switch (get_highest_layer(state)) {
-//     case _LOWER:
-//           rgblight_sethsv_at(HSV_CYAN,0);
-//           break;
-//     case _RAISE:
-//           rgblight_sethsv_at(HSV_RED,0);
-//         break;
-//     case _ADJUST:
-//           rgblight_sethsv_at(HSV_GREEN,0);
-//         break;
-//     default: //  for any other layers, or the default layer
-//           rgblight_sethsv(0,0,0);
-//         break;
-//     }
-//   #endif
-//   return state;
-// }
+layer_state_t layer_state_set_user(layer_state_t state) {
+  #ifdef RGBLIGHT_ENABLE
+    switch (get_highest_layer(state)) {
+    case _LOWER:
+          rgblight_sethsv_at(HSV_CYAN,0);
+          break;
+    case _RAISE:
+          rgblight_sethsv_at(HSV_RED,0);
+        break;
+    case _ADJUST:
+          rgblight_sethsv_at(HSV_GREEN,0);
+        break;
+    default: //  for any other layers, or the default layer
+          rgblight_sethsv(0,0,0);
+        break;
+    }
+  #endif
+  return state;
+}
 
 #ifdef RGBLIGHT_LAYERS
 // Light LEDs 1 in cyan when keyboard layer 1 is active

keyboards/jones/v.0.1/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+#BOOTLOADER = caterina
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/jones/v.0.1/v.0.1.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "jones.h"
+#include "v.0.1.h"
 
 // Optional override functions below.
 // You can leave any or all of these undefined.