diff --git a/keyboards/ducky/info.json b/keyboards/ducky/info.json
deleted file mode 100644
index b1a0a30a9e3..00000000000
--- a/keyboards/ducky/info.json
+++ /dev/null
@@ -1,4 +0,0 @@
-{
- "manufacturer": "Ducky",
- "maintainer": "GitWellBack"
-}
diff --git a/keyboards/ducky/one2mini/boards/NUC123SD4AN0/board.c b/keyboards/ducky/one2mini/boards/NUC123SD4AN0/board.c
index f0d9bd34ef5..a10223603ef 100644
--- a/keyboards/ducky/one2mini/boards/NUC123SD4AN0/board.c
+++ b/keyboards/ducky/one2mini/boards/NUC123SD4AN0/board.c
@@ -23,47 +23,35 @@
* This variable is used by the HAL when initializing the PAL driver.
*/
const PALConfig pal_default_config = {
-#if NUC123_HAS_GPIOA
- {VAL_GPIOA_PMD, VAL_GPIOA_OFFD, VAL_GPIOA_DMASK, VAL_GPIOA_DBEN,
- VAL_GPIOA_IMD, VAL_GPIOA_IEN, VAL_GPIOA_ISRC, VAL_GPIOA_DOUT},
-#endif
-#if NUC123_HAS_GPIOB
- {VAL_GPIOB_PMD, VAL_GPIOB_OFFD, VAL_GPIOB_DMASK, VAL_GPIOB_DBEN,
- VAL_GPIOB_IMD, VAL_GPIOB_IEN, VAL_GPIOB_ISRC, VAL_GPIOB_DOUT},
-#endif
-#if NUC123_HAS_GPIOC
- {VAL_GPIOC_PMD, VAL_GPIOC_OFFD, VAL_GPIOC_DMASK, VAL_GPIOC_DBEN,
- VAL_GPIOC_IMD, VAL_GPIOC_IEN, VAL_GPIOC_ISRC, VAL_GPIOC_DOUT},
-#endif
-#if NUC123_HAS_GPIOD
- {VAL_GPIOD_PMD, VAL_GPIOD_OFFD, VAL_GPIOD_DMASK, VAL_GPIOD_DBEN,
- VAL_GPIOD_IMD, VAL_GPIOD_IEN, VAL_GPIOD_ISRC, VAL_GPIOD_DOUT},
-#endif
-#if NUC123_HAS_GPIOF
- {VAL_GPIOF_PMD, VAL_GPIOF_OFFD, VAL_GPIOF_DMASK, VAL_GPIOF_DBEN,
- VAL_GPIOF_IMD, VAL_GPIOF_IEN, VAL_GPIOF_ISRC, VAL_GPIOF_DOUT},
-#endif
+# if NUC123_HAS_GPIOA
+ {VAL_GPIOA_PMD, VAL_GPIOA_OFFD, VAL_GPIOA_DMASK, VAL_GPIOA_DBEN, VAL_GPIOA_IMD, VAL_GPIOA_IEN, VAL_GPIOA_ISRC, VAL_GPIOA_DOUT},
+# endif
+# if NUC123_HAS_GPIOB
+ {VAL_GPIOB_PMD, VAL_GPIOB_OFFD, VAL_GPIOB_DMASK, VAL_GPIOB_DBEN, VAL_GPIOB_IMD, VAL_GPIOB_IEN, VAL_GPIOB_ISRC, VAL_GPIOB_DOUT},
+# endif
+# if NUC123_HAS_GPIOC
+ {VAL_GPIOC_PMD, VAL_GPIOC_OFFD, VAL_GPIOC_DMASK, VAL_GPIOC_DBEN, VAL_GPIOC_IMD, VAL_GPIOC_IEN, VAL_GPIOC_ISRC, VAL_GPIOC_DOUT},
+# endif
+# if NUC123_HAS_GPIOD
+ {VAL_GPIOD_PMD, VAL_GPIOD_OFFD, VAL_GPIOD_DMASK, VAL_GPIOD_DBEN, VAL_GPIOD_IMD, VAL_GPIOD_IEN, VAL_GPIOD_ISRC, VAL_GPIOD_DOUT},
+# endif
+# if NUC123_HAS_GPIOF
+ {VAL_GPIOF_PMD, VAL_GPIOF_OFFD, VAL_GPIOF_DMASK, VAL_GPIOF_DBEN, VAL_GPIOF_IMD, VAL_GPIOF_IEN, VAL_GPIOF_ISRC, VAL_GPIOF_DOUT},
+# endif
};
#endif
-void enter_bootloader_mode_if_requested(void);
-
/**
* @brief Early initialization code.
* @details This initialization must be performed just after stack setup
* and before any other initialization.
*/
void __early_init(void) {
- //enter_bootloader_mode_if_requested();
- NUC123_clock_init();
+ NUC123_clock_init();
}
-
-
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
-void boardInit(void) {
-
-}
+void boardInit(void) {}
diff --git a/keyboards/ducky/one2mini/chconf.h b/keyboards/ducky/one2mini/chconf.h
index 4ac78ba76c1..ab5a639bebb 100644
--- a/keyboards/ducky/one2mini/chconf.h
+++ b/keyboards/ducky/one2mini/chconf.h
@@ -127,10 +127,6 @@
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
/** @} */
/*===========================================================================*/
diff --git a/keyboards/ducky/one2mini/config.h b/keyboards/ducky/one2mini/config.h
index 3cf59c90178..29ee334c3f1 100644
--- a/keyboards/ducky/one2mini/config.h
+++ b/keyboards/ducky/one2mini/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see .
#define DEVICE_VER 0x0001
#define MANUFACTURER Ducky
#define PRODUCT One2mini
-#define DESCRIPTION Ducky One 2 mini RGB 60% keyboard
/* key matrix size */
#define MATRIX_ROWS 5
diff --git a/keyboards/ducky/one2mini/keymaps/ansi/config.h b/keyboards/ducky/one2mini/keymaps/ansi/config.h
deleted file mode 100644
index 4214bf6761a..00000000000
--- a/keyboards/ducky/one2mini/keymaps/ansi/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright 2019 /u/KeepItUnder
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-// place overrides here
diff --git a/keyboards/ducky/one2mini/rules.mk b/keyboards/ducky/one2mini/rules.mk
index c4be42eeaa6..9246d6b3a41 100644
--- a/keyboards/ducky/one2mini/rules.mk
+++ b/keyboards/ducky/one2mini/rules.mk
@@ -23,71 +23,16 @@ MCU = cortex-m0
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 6
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 72000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-#ARCH = ARM
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU/4)
-
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader selection
-# Teensy halfkay
-# Pro Micro caterina
-# Atmel DFU atmel-dfu
-# LUFA DFU lufa-dfu
-# QMK DFU qmk-dfu
-# atmega32a bootloadHID
-#BOOTLOADER = QMK-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
@@ -95,12 +40,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no # MIDI support
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
#WAIT_FOR_USB = no # Don't wait for USB driver to initialise
CUSTOM_MATRIX = yes # Custom keyscan matrix (don't force inputs)