add GON NerD

keyboards/gonnerd/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/gonnerd/config.h

@@ -0,0 +1,43 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    GON
+#define PRODUCT         NerD
+#define DESCRIPTION     QMK port for the GON Nerd PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 9
+
+/* backlight */
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
+
+/* matrix pins */
+#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 }
+#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif

keyboards/gonnerd/gonnerd.c

@@ -0,0 +1 @@
+#include "gonnerd.h"

keyboards/gonnerd/gonnerd.h

@@ -0,0 +1,42 @@
+#ifndef GONNERD_H
+#define GONNERD_H
+
+#include "quantum.h"
+
+#define KEYMAP_TKL( \
+        K08,      K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68,    K69, K88, K89, \
+        K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61,    K80, K81, K84, \
+        K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63,    K82, K83, K85, \
+        K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65,                   \
+        K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67,         K86,      \
+        K06, K05, K78,                K70,                K72, K73, K74, K75,    K76, K77, K87  \
+) \
+{ \
+      {  K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \
+      {  K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \
+      {  K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \
+      {  K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \
+      {  K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \
+      {  K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \
+      {  K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \
+      {  K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \
+      {  K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \
+      {  K09, K19, K29, K39, K49, K59, K69, K79, K89 } \
+}
+
+#define KEYMAP_60( \
+        K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
+        K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
+        K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
+        K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \
+        K06, K05, K78,                K70,                K72, K73, K74, K75  \
+) KEYMAP_TKL( \
+        K08,          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,  KC_NO,    KC_NO, KC_NO, KC_NO,  \
+        KC_NO, K01,   K10,   K11,   K20,   K21,   K30,   K31,   K40,   K41,   K50,   K51,   K60,    K61,      KC_NO, KC_NO, KC_NO,  \
+        K02,   K03,   K12,   K13,   K22,   K23,   K32,   K33,   K42,   K43,   K52,   K53,   K62,    K63,      KC_NO, KC_NO, KC_NO,  \
+        K04,   K14,   K15,   K24,   K25,   K34,   K35,   K44,   K45,   K54,   K55,   K64,   K71,    K65,                            \
+        K07,   K79,   K16,   K17,   K26,   K27,   K36,   K37,   K46,   K47,   K56,   K57,   K66,    K67,             KC_NO,         \
+        K06,   K05,   K78,                        K70,                        K72,   K73,   K74,    K75,      KC_NO, KC_NO, KC_NO   \
+)
+
+#endif

keyboards/gonnerd/keymaps/default/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gonnerd/keymaps/default/keymap.c

@@ -0,0 +1,16 @@
+#include "gonnerd.h"
+
+// Keymap layers
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP_60( /* Base */
+    KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,\
+    KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,\
+    KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NO,  KC_ENT, \
+    KC_LSFT,KC_NO,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO,  \
+    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                         KC_RALT,KC_RGUI,MO(1),  KC_RCTL),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};

keyboards/gonnerd/keymaps/mauin/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gonnerd/keymaps/mauin/keymap.c

@@ -0,0 +1,78 @@
+#include "gonnerd.h"
+
+// Keymap layers
+#define BASE_LAYER 0
+#define FUNCTION_LAYER 1
+#define SYSTEM_LAYER 2
+
+// Key aliases
+#define __x__ KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Layer 0: Default Layer
+   * ,-----------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  = |  BSp |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+   * |-----------------------------------------------------------|
+   * |Funct |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
+   * |-----------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|    Shift |
+   * |-----------------------------------------------------------'
+   * |  Ctl|Alt|Gui  |         Space         |Gui  |Alt| F2| Ctl |
+   * `-----------------------------------------------------------'
+   */
+  [BASE_LAYER] = KEYMAP_60(
+      KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,    KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC, \
+      KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,    KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, \
+      MO(1),    KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,    KC_L,     KC_SCLN,  KC_QUOT,  __x__,    KC_ENT, \
+      KC_LSFT,  __x__,    KC_Z,     KC_X,     KC_C,    KC_V,     KC_B,     KC_N,    KC_M,    KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,  __x__, \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                         KC_RGUI,  KC_RALT,  MO(3),    KC_RCTL \
+  ),
+
+  /* Layer 1: Function Layer
+   * ,-----------------------------------------------------------.
+   * |   | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12|  Del |
+   * |-----------------------------------------------------------|
+   * |     |Prv|Ply|Nxt|   |   |Pg^|Hme|Up |End|   |Br-|Br+|     |
+   * |-----------------------------------------------------------|
+   * |Hold  |Mte|Vl-|Vl+|   |   |Pgv|Lft|Dwn|Rgt|   |   |        |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |          |
+   * |-----------------------------------------------------------'
+   * |     |   |     |                       |     |   |   |     |
+   * `-----------------------------------------------------------'
+   */
+   [FUNCTION_LAYER] = KEYMAP_60(
+       KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
+       __x__,   KC_MPRV, KC_MPLY, KC_MNXT, __x__,   __x__,   KC_PGUP, KC_HOME, KC_UP,   KC_END,  __x__,   KC_SLCK, KC_PAUS, __x__, \
+       KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__,   __x__,   KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__,   __x__,   __x__,   __x__, \
+       KC_LSFT,  __x__,  __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__,   __x__, \
+       KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                                      __x__,   __x__,   __x__,   __x__ \
+   ),
+
+  /* Layer 2: System Layer
+   * ,-----------------------------------------------------------.
+   * |Reset|   |   |   |   |   |   |   |   |   |   |    |   |    |
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+   * |-----------------------------------------------------------|
+   * |      |   |   |   |   |   |   |   |   |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |          |
+   * |-----------------------------------------------------------'
+   * |     |   |     |                       |     |   |   |     |
+   * `-----------------------------------------------------------'
+   */
+  [SYSTEM_LAYER] = KEYMAP_60(
+      RESET,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,   __x__, \
+      __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,   __x__, \
+      __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,   __x__, \
+      __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,  __x__,   __x__, \
+      __x__,  __x__,  __x__,                  __x__,                                  __x__,  __x__,  KC_TRNS, __x__ \
+  ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};

keyboards/gonnerd/keymaps/mauin/readme.md

@@ -0,0 +1,5 @@
+# Mauin's keymap for the GON NerD
+
+This layout is based on a Pok3r style layout with a standard base layer.
+
+Function layers provide access to navigation and media keys.

keyboards/gonnerd/readme.md

@@ -0,0 +1,34 @@
+GON NerD keyboard firmware
+======================
+
+## Changing Bootloader
+
+It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
+
+It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
+[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
+
+_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
+not work anymore. You will lose your warranty and official support from GON!_
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

keyboards/gonnerd/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+                             # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+                             # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6

keyboards/readme.md

@@ -39,6 +39,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard.
 * [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club.
 * [GH60](/keyboards/gh60) — A 60% Geekhack community-driven project.
+* [GON NerD](/keyboards/gonnerd) — Korean custom 60% PCB
 * [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
 * [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club.
 * [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe.