gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2025-07-17 13:12:08 +00:00
Code Issues Packages Projects Releases Wiki Activity

Minor Changes

Browse Source 
Minor changers per PR requests
This commit is contained in:
J.Flanagan 2019-10-01 15:34:18 -05:00
parent 8864eb6397
commit 5a59ec8af5
2 changed files with 2 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
keyboards/sck/osa/readme.md
View File

@ -1,6 +1,6 @@
# osa # osa
![osa](imgur.com image replace me!) ![osa](https://imgur.com/U2x7TQ8)
About the OSA: About the OSA:
@ -9,7 +9,7 @@ All case and other design files have been either reworked or created from scratc
The OSA PCB is an ATMega32u4 powered, USB Type C, Alice compatible PCB and was created specifically for the OSA case, but with considerations to make it compatible with the Lubrigante acrylic cases (except for the Type C connector it should also be compatible with original TGR Alice cases). The OSA PCB is an ATMega32u4 powered, USB Type C, Alice compatible PCB and was created specifically for the OSA case, but with considerations to make it compatible with the Lubrigante acrylic cases (except for the Type C connector it should also be compatible with original TGR Alice cases).
Keyboard Maintainer: [jrfhoutx](https://github.com/jrfhoutx) Keyboard Maintainer: [jrfhoutx](https://github.com/jrfhoutx)
Hardware Supported: OSA PCB by BlindAssassin111, ATMEGA32u4 Hardware Supported: OSA PCB by BlindAssassin111, ATMEGA32u4
Hardware Availability: Currently unavailable outside of the private group buy Hardware Availability: Currently unavailable outside of the private group buy
Make example for this keyboard (after setting up your build environment): Make example for this keyboard (after setting up your build environment):

45
keyboards/sck/osa/rules.mk
View File

@ -2,41 +2,6 @@
#MCU = at90usb1286 #MCU = at90usb1286
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
#F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
#ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
#F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection # Bootloader selection
@ -50,16 +15,6 @@ BOOTLOADER = atmel-dfu
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# change yes to no to disable # change yes to no to disable
# #