mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-30 15:05:50 +00:00
Merge branch 'master' into hf/shinydox
This commit is contained in:
Erez Zukerman
commit
5272218ac9
3
.vscode/settings.json
vendored
3
.vscode/settings.json
vendored
@ -11,6 +11,7 @@
|
||||
"*.h": "c",
|
||||
"*.c": "c",
|
||||
"*.cpp": "cpp",
|
||||
"*.hpp": "cpp"
|
||||
"*.hpp": "cpp",
|
||||
"xstddef": "c"
|
||||
}
|
||||
}
|
||||
@ -117,7 +117,7 @@ endif
|
||||
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
|
||||
OPT_DEFS += -DRGB_MATRIX_ENABLE
|
||||
SRC += is31fl3731.c
|
||||
SRC += TWIlib.c
|
||||
SRC += i2c_master.c
|
||||
SRC += $(QUANTUM_DIR)/color.c
|
||||
SRC += $(QUANTUM_DIR)/rgb_matrix.c
|
||||
CIE1931_CURVE = yes
|
||||
|
||||
@ -81,7 +81,6 @@ These are the effects that are currently available:
|
||||
|
||||
enum rgb_matrix_effects {
|
||||
RGB_MATRIX_SOLID_COLOR = 1,
|
||||
RGB_MATRIX_SOLID_REACTIVE,
|
||||
RGB_MATRIX_ALPHAS_MODS,
|
||||
RGB_MATRIX_DUAL_BEACON,
|
||||
RGB_MATRIX_GRADIENT_UP_DOWN,
|
||||
@ -94,6 +93,7 @@ These are the effects that are currently available:
|
||||
RGB_MATRIX_RAINBOW_MOVING_CHEVRON,
|
||||
RGB_MATRIX_JELLYBEAN_RAINDROPS,
|
||||
#ifdef RGB_MATRIX_KEYPRESSES
|
||||
RGB_MATRIX_SOLID_REACTIVE,
|
||||
RGB_MATRIX_SPLASH,
|
||||
RGB_MATRIX_MULTISPLASH,
|
||||
RGB_MATRIX_SOLID_SPLASH,
|
||||
@ -118,7 +118,7 @@ A similar function works in the keymap as `rgb_matrix_indicators_user`.
|
||||
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
|
||||
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
||||
#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
|
||||
#define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect)
|
||||
#define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1
|
||||
|
||||
## EEPROM storage
|
||||
|
||||
|
||||
@ -19,8 +19,10 @@ First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feat
|
||||
This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options:
|
||||
|
||||
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
|
||||
* `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
|
||||
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
|
||||
* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
|
||||
** `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
|
||||
|
||||
The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
|
||||
|
||||
|
||||
@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
|
||||
The `<target>` means the following
|
||||
* If no target is given, then it's the same as `all` below
|
||||
* `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
|
||||
* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
|
||||
* `dfu`, `teensy`, `avrdude` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
|
||||
* **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
|
||||
* `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
|
||||
|
||||
|
||||
@ -8,6 +8,7 @@
|
||||
<meta name="viewport" content="width=device-width, user-scalable=no, initial-scale=1.0, maximum-scale=1.0, minimum-scale=1.0">
|
||||
<link rel="stylesheet" href="//unpkg.com/docsify/lib/themes/vue.css" title="light">
|
||||
<link rel="stylesheet" href="qmk.css" title="dark" disabled>
|
||||
<link rel="stylesheet" href="sidebar.css" />
|
||||
</head>
|
||||
<body>
|
||||
<div id="app"></div>
|
||||
|
||||
10
docs/sidebar.css
Normal file
10
docs/sidebar.css
Normal file
@ -0,0 +1,10 @@
|
||||
.sidebar-toggle {
|
||||
position: absolute;
|
||||
top: 0;
|
||||
bottom: auto;
|
||||
left: 0;
|
||||
}
|
||||
|
||||
.search {
|
||||
margin-top: 40px;
|
||||
}
|
||||
@ -1,232 +0,0 @@
|
||||
/*
|
||||
* TWIlib.c
|
||||
*
|
||||
* Created: 6/01/2014 10:41:33 PM
|
||||
* Author: Chris Herring
|
||||
* http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include "TWIlib.h"
|
||||
#include "util/delay.h"
|
||||
|
||||
void TWIInit()
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWIInfo.repStart = 0;
|
||||
// Set pre-scalers (no pre-scaling)
|
||||
TWSR = 0;
|
||||
// Set bit rate
|
||||
TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
|
||||
// Enable TWI and interrupt
|
||||
TWCR = (1 << TWIE) | (1 << TWEN);
|
||||
}
|
||||
|
||||
uint8_t isTWIReady()
|
||||
{
|
||||
if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
|
||||
{
|
||||
if (dataLen <= TXMAXBUFLEN)
|
||||
{
|
||||
// Wait until ready
|
||||
while (!isTWIReady()) {_delay_us(1);}
|
||||
// Set repeated start mode
|
||||
TWIInfo.repStart = repStart;
|
||||
// Copy data into the transmit buffer
|
||||
uint8_t *data = (uint8_t *)TXdata;
|
||||
for (int i = 0; i < dataLen; i++)
|
||||
{
|
||||
TWITransmitBuffer[i] = data[i];
|
||||
}
|
||||
// Copy transmit info to global variables
|
||||
TXBuffLen = dataLen;
|
||||
TXBuffIndex = 0;
|
||||
|
||||
// If a repeated start has been sent, then devices are already listening for an address
|
||||
// and another start does not need to be sent.
|
||||
if (TWIInfo.mode == RepeatedStartSent)
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
else // Otherwise, just send the normal start signal to begin transmission.
|
||||
{
|
||||
TWIInfo.mode = Initializing;
|
||||
TWISendStart();
|
||||
}
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
return 1; // return an error if data length is longer than buffer
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
|
||||
{
|
||||
// Check if number of bytes to read can fit in the RXbuffer
|
||||
if (bytesToRead < RXMAXBUFLEN)
|
||||
{
|
||||
// Reset buffer index and set RXBuffLen to the number of bytes to read
|
||||
RXBuffIndex = 0;
|
||||
RXBuffLen = bytesToRead;
|
||||
// Create the one value array for the address to be transmitted
|
||||
uint8_t TXdata[1];
|
||||
// Shift the address and AND a 1 into the read write bit (set to write mode)
|
||||
TXdata[0] = (TWIaddr << 1) | 0x01;
|
||||
// Use the TWITransmitData function to initialize the transfer and address the slave
|
||||
TWITransmitData(TXdata, 1, repStart);
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
ISR (TWI_vect)
|
||||
{
|
||||
switch (TWI_STATUS)
|
||||
{
|
||||
// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- //
|
||||
case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
|
||||
// Set mode to Master Transmitter
|
||||
TWIInfo.mode = MasterTransmitter;
|
||||
case TWI_START_SENT: // Start condition has been transmitted
|
||||
case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
|
||||
if (TXBuffIndex < TXBuffLen) // If there is more data to send
|
||||
{
|
||||
TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendTransmit(); // Send the data
|
||||
}
|
||||
// This transmission is complete however do not release bus yet
|
||||
else if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MASTER RECEIVER ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
|
||||
// Switch to Master Receiver mode
|
||||
TWIInfo.mode = MasterReceiver;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// If there is more than one byte to be read, receive data byte and return an ACK
|
||||
if (RXBuffIndex < RXBuffLen-1)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendACK();
|
||||
}
|
||||
// Otherwise when a data byte (the only data byte) is received, return NACK
|
||||
else
|
||||
{
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
TWISendNACK();
|
||||
}
|
||||
break;
|
||||
|
||||
case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
|
||||
|
||||
/// -- HANDLE DATA BYTE --- ///
|
||||
TWIReceiveBuffer[RXBuffIndex++] = TWDR;
|
||||
// This transmission is complete however do not release bus yet
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = 0xFF;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
|
||||
// ----\/ ---- MT and MR common ----\/ ---- //
|
||||
|
||||
case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
|
||||
case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
|
||||
case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
|
||||
case TWI_LOST_ARBIT: // Arbitration has been lost
|
||||
// Return error and send stop and set mode to ready
|
||||
if (TWIInfo.repStart)
|
||||
{
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStart();
|
||||
}
|
||||
// All transmissions are complete, exit
|
||||
else
|
||||
{
|
||||
TWIInfo.mode = Ready;
|
||||
TWIInfo.errorCode = TWI_STATUS;
|
||||
TWISendStop();
|
||||
}
|
||||
break;
|
||||
case TWI_REP_START_SENT: // Repeated start has been transmitted
|
||||
// Set the mode but DO NOT clear TWINT as the next data is not yet ready
|
||||
TWIInfo.mode = RepeatedStartSent;
|
||||
break;
|
||||
|
||||
// ----\/ ---- SLAVE RECEIVER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- SLAVE TRANSMITTER ----\/ ---- //
|
||||
|
||||
// TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
|
||||
|
||||
// ----\/ ---- MISCELLANEOUS STATES ----\/ ---- //
|
||||
case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
|
||||
// Rather, it is there to be manually set between operations
|
||||
break;
|
||||
case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
|
||||
TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
|
||||
TWIInfo.mode = Ready;
|
||||
TWISendStop();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
@ -1,82 +0,0 @@
|
||||
/*
|
||||
* TWIlib.h
|
||||
*
|
||||
* Created: 6/01/2014 10:38:42 PM
|
||||
* Author: Chris Herring
|
||||
* http://www.chrisherring.net/all/tutorial-interrupt-driven-twi-interface-for-avr-part1/
|
||||
*/
|
||||
|
||||
|
||||
#ifndef TWILIB_H_
|
||||
#define TWILIB_H_
|
||||
// TWI bit rate (was 100000)
|
||||
#define TWI_FREQ 400000
|
||||
// Get TWI status
|
||||
#define TWI_STATUS (TWSR & 0xF8)
|
||||
// Transmit buffer length
|
||||
#define TXMAXBUFLEN 20
|
||||
// Receive buffer length
|
||||
#define RXMAXBUFLEN 20
|
||||
// Global transmit buffer
|
||||
uint8_t TWITransmitBuffer[TXMAXBUFLEN];
|
||||
// Global receive buffer
|
||||
volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
|
||||
// Buffer indexes
|
||||
volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
|
||||
int RXBuffIndex; // Current index in the receive buffer
|
||||
// Buffer lengths
|
||||
int TXBuffLen; // The total length of the transmit buffer
|
||||
int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
|
||||
|
||||
typedef enum {
|
||||
Ready,
|
||||
Initializing,
|
||||
RepeatedStartSent,
|
||||
MasterTransmitter,
|
||||
MasterReceiver,
|
||||
SlaceTransmitter,
|
||||
SlaveReciever
|
||||
} TWIMode;
|
||||
|
||||
typedef struct TWIInfoStruct{
|
||||
TWIMode mode;
|
||||
uint8_t errorCode;
|
||||
uint8_t repStart;
|
||||
}TWIInfoStruct;
|
||||
TWIInfoStruct TWIInfo;
|
||||
|
||||
|
||||
// TWI Status Codes
|
||||
#define TWI_START_SENT 0x08 // Start sent
|
||||
#define TWI_REP_START_SENT 0x10 // Repeated Start sent
|
||||
// Master Transmitter Mode
|
||||
#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received
|
||||
#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received
|
||||
#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received
|
||||
#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received
|
||||
// Master Receiver Mode
|
||||
#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received
|
||||
#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received
|
||||
#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned
|
||||
#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned
|
||||
|
||||
// Miscellaneous States
|
||||
#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost
|
||||
#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available
|
||||
#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected
|
||||
#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
|
||||
|
||||
|
||||
#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
|
||||
#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
|
||||
#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
|
||||
#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
|
||||
|
||||
// Function declarations
|
||||
uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart);
|
||||
void TWIInit(void);
|
||||
uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
|
||||
uint8_t isTWIReady(void);
|
||||
|
||||
#endif // TWICOMMS_H_
|
||||
149
drivers/avr/i2c_master.c
Executable file
149
drivers/avr/i2c_master.c
Executable file
@ -0,0 +1,149 @@
|
||||
/* Library made by: g4lvanix
|
||||
* Github repository: https://github.com/g4lvanix/I2C-master-lib
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/twi.h>
|
||||
|
||||
#include "i2c_master.h"
|
||||
|
||||
#define F_SCL 400000UL // SCL frequency
|
||||
#define Prescaler 1
|
||||
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
|
||||
|
||||
void i2c_init(void)
|
||||
{
|
||||
TWBR = (uint8_t)TWBR_val;
|
||||
}
|
||||
|
||||
uint8_t i2c_start(uint8_t address)
|
||||
{
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
// transmit START condition
|
||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if((TWSR & 0xF8) != TW_START){ return 1; }
|
||||
|
||||
// load slave address into data register
|
||||
TWDR = address;
|
||||
// start transmission of address
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_write(uint8_t data)
|
||||
{
|
||||
// load data into data register
|
||||
TWDR = data;
|
||||
// start transmission of data
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
|
||||
if( (TWSR & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_read_ack(void)
|
||||
{
|
||||
|
||||
// start TWI module and acknowledge data after reception
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
// return received data from TWDR
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
uint8_t i2c_read_nack(void)
|
||||
{
|
||||
|
||||
// start receiving without acknowledging reception
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
// wait for end of transmission
|
||||
while( !(TWCR & (1<<TWINT)) );
|
||||
// return received data from TWDR
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(address | I2C_WRITE)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(address | I2C_READ)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(devaddr | 0x00)) return 1;
|
||||
|
||||
i2c_write(regaddr);
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(devaddr)) return 1;
|
||||
|
||||
i2c_write(regaddr);
|
||||
|
||||
if (i2c_start(devaddr | 0x01)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void i2c_stop(void)
|
||||
{
|
||||
// transmit STOP condition
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
}
|
||||
22
drivers/avr/i2c_master.h
Executable file
22
drivers/avr/i2c_master.h
Executable file
@ -0,0 +1,22 @@
|
||||
/* Library made by: g4lvanix
|
||||
* Github repository: https://github.com/g4lvanix/I2C-master-lib
|
||||
*/
|
||||
|
||||
#ifndef I2C_MASTER_H
|
||||
#define I2C_MASTER_H
|
||||
|
||||
#define I2C_READ 0x01
|
||||
#define I2C_WRITE 0x00
|
||||
|
||||
void i2c_init(void);
|
||||
uint8_t i2c_start(uint8_t address);
|
||||
uint8_t i2c_write(uint8_t data);
|
||||
uint8_t i2c_read_ack(void);
|
||||
uint8_t i2c_read_nack(void);
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
void i2c_stop(void);
|
||||
|
||||
#endif // I2C_MASTER_H
|
||||
@ -20,7 +20,7 @@
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include <string.h>
|
||||
#include "TWIlib.h"
|
||||
#include "i2c_master.h"
|
||||
#include "progmem.h"
|
||||
|
||||
// This is a 7-bit address, that gets left-shifted and bit 0
|
||||
@ -50,7 +50,7 @@
|
||||
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||
|
||||
// Transfer buffer for TWITransmitData()
|
||||
uint8_t g_twi_transfer_buffer[TXMAXBUFLEN];
|
||||
uint8_t g_twi_transfer_buffer[20];
|
||||
|
||||
// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
|
||||
// Storing them like this is optimal for I2C transfers to the registers.
|
||||
@ -80,17 +80,11 @@ bool g_led_control_registers_update_required = false;
|
||||
|
||||
void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||
{
|
||||
g_twi_transfer_buffer[0] = (addr << 1) | 0x00;
|
||||
g_twi_transfer_buffer[1] = reg;
|
||||
g_twi_transfer_buffer[2] = data;
|
||||
g_twi_transfer_buffer[0] = reg;
|
||||
g_twi_transfer_buffer[1] = data;
|
||||
|
||||
// Set the error code to have no relevant information
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
// Continuously attempt to transmit data until a successful transmission occurs
|
||||
//while ( TWIInfo.errorCode != 0xFF )
|
||||
//{
|
||||
TWITransmitData( g_twi_transfer_buffer, 3, 0 );
|
||||
//}
|
||||
//Transmit data until succesful
|
||||
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
|
||||
}
|
||||
|
||||
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||
@ -100,29 +94,21 @@ void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||
// transmit PWM registers in 9 transfers of 16 bytes
|
||||
// g_twi_transfer_buffer[] is 20 bytes
|
||||
|
||||
// set the I2C address
|
||||
g_twi_transfer_buffer[0] = (addr << 1) | 0x00;
|
||||
|
||||
// iterate over the pwm_buffer contents at 16 byte intervals
|
||||
for ( int i = 0; i < 144; i += 16 )
|
||||
{
|
||||
// set the first register, e.g. 0x24, 0x34, 0x44, etc.
|
||||
g_twi_transfer_buffer[1] = 0x24 + i;
|
||||
g_twi_transfer_buffer[0] = 0x24 + i;
|
||||
// copy the data from i to i+15
|
||||
// device will auto-increment register for data after the first byte
|
||||
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
|
||||
for ( int j = 0; j < 16; j++ )
|
||||
{
|
||||
g_twi_transfer_buffer[2 + j] = pwm_buffer[i + j];
|
||||
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
|
||||
}
|
||||
|
||||
// Set the error code to have no relevant information
|
||||
TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
|
||||
// Continuously attempt to transmit data until a successful transmission occurs
|
||||
while ( TWIInfo.errorCode != 0xFF )
|
||||
{
|
||||
TWITransmitData( g_twi_transfer_buffer, 16 + 2, 0 );
|
||||
}
|
||||
//Transmit buffer until succesful
|
||||
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -63,4 +63,19 @@
|
||||
K400, K401, K403, K406, K410, K411, K413, K414 \
|
||||
)
|
||||
|
||||
/* HHKB Variant */
|
||||
#define LAYOUT_60_hhkb( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \
|
||||
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K401, K403, K406, K411, K413 \
|
||||
) LAYOUT_all( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
|
||||
K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
KC_NO,K401, K403, K406, KC_NO,K411, K413, KC_NO \
|
||||
)
|
||||
|
||||
#endif
|
||||
|
||||
@ -19,6 +19,9 @@
|
||||
|
||||
"LAYOUT_60_ansi_split_bs_rshift": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
|
||||
},
|
||||
"LAYOUT_60_hhkb": {
|
||||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -55,4 +55,4 @@ BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
|
||||
LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift
|
||||
LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_hhkb
|
||||
|
||||
23
keyboards/bananasplit/keymaps/talljoe/config.h
Normal file
23
keyboards/bananasplit/keymaps/talljoe/config.h
Normal file
@ -0,0 +1,23 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include QMK_KEYBOARD_CONFIG_H
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
#define SPACE_COUNT 3
|
||||
|
||||
#define TEMPLATE( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K44, K45, K46, K48, K49, K4B, K4C \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
|
||||
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
|
||||
{ K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, KC_NO, K4B, K4C, KC_NO }\
|
||||
}
|
||||
|
||||
#endif
|
||||
1
keyboards/bananasplit/keymaps/talljoe/keymap.c
Normal file
1
keyboards/bananasplit/keymaps/talljoe/keymap.c
Normal file
@ -0,0 +1 @@
|
||||
// This space intentionally left blank
|
||||
@ -1 +1,30 @@
|
||||
#include "ca66.h"
|
||||
#include "config.h"
|
||||
|
||||
void bootmagic_lite(void)
|
||||
{
|
||||
// The lite version of TMK's bootmagic.
|
||||
// 100% less potential for accidentally making the
|
||||
// keyboard do stupid things.
|
||||
|
||||
// We need multiple scans because debouncing can't be turned off.
|
||||
matrix_scan();
|
||||
wait_ms(DEBOUNCING_DELAY);
|
||||
matrix_scan();
|
||||
|
||||
// If the Esc (matrix 0,0) is held down on power up,
|
||||
// reset the EEPROM valid state and jump to bootloader.
|
||||
if ( matrix_get_row(0) & (1<<0) )
|
||||
{
|
||||
// Set the TMK/QMK EEPROM state as invalid.
|
||||
eeconfig_disable();
|
||||
// Jump to bootloader.
|
||||
bootloader_jump();
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_init_kb(void)
|
||||
{
|
||||
bootmagic_lite();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
@ -6,9 +6,11 @@ Keyboard Maintainer: [James Underwood](https://github.com/ju0)
|
||||
Hardware Supported: naKey
|
||||
Hardware Availability: [ckeys.org](https://ckeys.org)
|
||||
|
||||
To build this keyboard, follow the [build guide](https://ckeys.org/tutorials/nakey-numpad-build-guide/).
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make nakey:default
|
||||
make ckeys/nakey:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
@ -18,7 +20,7 @@ For the full Quantum feature list, see [the parent readme](/).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the root folder. Once your dev env is setup, you'll be able to type `make naKey-default` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
Download or clone the whole firmware and navigate to the root folder. Once your dev env is setup, you'll be able to type `make ckeys/nakey:default` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
(Note: replace naKey with the name of your keyboard.)
|
||||
|
||||
@ -26,7 +28,7 @@ Depending on which keymap you would like to use, you will have to compile slight
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make naKey-default`.
|
||||
To build with the default keymap, simply run `make ckeys/nakey:default`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
@ -5,15 +5,15 @@ Obelus
|
||||
|
||||
Keyboard Maintaintainers: [Ethan Madden](https://github.com/jetpacktuxedo), [James Underwood](https://github.com/ju0)
|
||||
Hardware Supported: Obelus
|
||||
Hardware Availability: C-Keys soldering workshops, /u/MonkeyPlusPlus
|
||||
Hardware Availability: [C-Keys soldering workshops](https://ckeys.org/workshops/), [/u/MonkeyPlusPlus](https://www.reddit.com/user/monkeyplusplus)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make obelus:default
|
||||
make ckeys/obelus:default
|
||||
|
||||
Or to make and flash:
|
||||
|
||||
make obelus:default:dfu
|
||||
make ckeys/obelus:default:dfu
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) and [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
9
keyboards/ckeys/readme.md
Normal file
9
keyboards/ckeys/readme.md
Normal file
@ -0,0 +1,9 @@
|
||||
# Ckeys.org
|
||||
|
||||
[ckeys](https://ckeys.org/) is a mechanical keyboard based non profit, located in Seattle, Washington.
|
||||
|
||||
In addition, to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), they have [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.
|
||||
|
||||
* Supported Hardware
|
||||
* The Obelus - 4x4 Macropad
|
||||
* naKey - Through hole numpad
|
||||
@ -91,5 +91,20 @@
|
||||
{ K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_60_ansi( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \
|
||||
K400, K401, K403, K406, K410, K411, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \
|
||||
{ K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO }, \
|
||||
{ K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413, K414 } \
|
||||
}
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
@ -27,6 +27,10 @@
|
||||
|
||||
"LAYOUT_all": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"Shift", "x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
|
||||
},
|
||||
|
||||
"LAYOUT_60_ansi": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
17
keyboards/dz60/keymaps/xtonhasvim/config.h
Normal file
17
keyboards/dz60/keymaps/xtonhasvim/config.h
Normal file
@ -0,0 +1,17 @@
|
||||
#ifndef CONFIG_KEYMAP_H
|
||||
#define CONFIG_KEYMAP_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// help for fast typist+dual function keys?
|
||||
#define PERMISSIVE_HOLD
|
||||
|
||||
/* speed up mousekeys a bit */
|
||||
#define MOUSEKEY_DELAY 50
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_MAX_SPEED 8
|
||||
#define MOUSEKEY_TIME_TO_MAX 30
|
||||
#define MOUSEKEY_WHEEL_MAX_SPEED 8
|
||||
#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
|
||||
|
||||
#endif
|
||||
92
keyboards/dz60/keymaps/xtonhasvim/keymap.c
Normal file
92
keyboards/dz60/keymaps/xtonhasvim/keymap.c
Normal file
@ -0,0 +1,92 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "xtonhasvim.h"
|
||||
|
||||
enum layers {
|
||||
_QWERTY,
|
||||
_FUN,
|
||||
_MOVE,
|
||||
_MOUSE
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_MOVE,KC_SCLN), KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
|
||||
KC_LCTL, KC_LALT, KC_LGUI, VIM_START, TG(_MOUSE), KC_SPC, KC_RGUI, KC_RALT, X_____X, KC_RCTL, MO(_FUN)),
|
||||
|
||||
[_FUN] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL,
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, RESET,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______,
|
||||
TO(_QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[_MOVE] = LAYOUT(
|
||||
X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X,
|
||||
X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, KC_HOME, KC_PGDN, KC_PGUP, KC_END, X_____X, X_____X, X_____X, X_____X,
|
||||
X_____X, X_____X, LGUI(KC_LBRC), LGUI(LSFT(KC_LBRC)), LGUI(LSFT(KC_RBRC)), LGUI(KC_RBRC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, X_____X, X_____X, X_____X,
|
||||
_______, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______,
|
||||
TO(_QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
|
||||
[_MOUSE] = LAYOUT(
|
||||
X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X,
|
||||
X_____X, X_____X, X_____X, KC_MS_UP, X_____X, X_____X, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_UP, KC_MS_WH_RIGHT, X_____X, X_____X, X_____X, X_____X,
|
||||
X_____X, X_____X,KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, X_____X, X_____X, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, X_____X, X_____X, X_____X,
|
||||
_______, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______,
|
||||
TO(_QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[_EDIT] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
TO(_QWERTY), _______, _______, VIM_START, _______, _______, _______, _______, _______, _______, _______),
|
||||
|
||||
[_CMD] = LAYOUT(
|
||||
X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X,
|
||||
X_____X, X_____X, VIM_W, VIM_E, X_____X, X_____X, VIM_Y, VIM_U, VIM_I, VIM_O, VIM_P, X_____X, X_____X, X_____X,
|
||||
VIM_ESC, VIM_A, VIM_S, VIM_D, X_____X, VIM_G, VIM_H, VIM_J, VIM_K, VIM_L, X_____X, X_____X, X_____X,
|
||||
VIM_SHIFT, X_____X, X_____X, VIM_X, VIM_C, VIM_V, VIM_B, X_____X, X_____X, VIM_COMMA, VIM_PERIOD, X_____X, VIM_SHIFT,X_____X,
|
||||
TO(_QWERTY), _______, _______, TO(_QWERTY), X_____X, X_____X, _______, _______, _______, _______, _______),
|
||||
|
||||
};
|
||||
|
||||
#define LED_BIT 1 << 2
|
||||
#define LED_MASK ~(1 << 2)
|
||||
|
||||
void user_led_on(void) {
|
||||
DDRB |= LED_BIT;
|
||||
PORTB &= LED_MASK;
|
||||
}
|
||||
|
||||
void user_led_off(void) {
|
||||
DDRB &= ~LED_BIT;
|
||||
PORTB &= LED_MASK;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
user_led_off();
|
||||
}
|
||||
|
||||
uint32_t layer_state_set_user(uint32_t state) {
|
||||
static uint32_t last_state = 0;
|
||||
|
||||
if(last_state != state) {
|
||||
switch (biton32(state)) {
|
||||
case _CMD:
|
||||
user_led_on();
|
||||
break;
|
||||
default:
|
||||
user_led_off();
|
||||
break;
|
||||
}
|
||||
last_state = state;
|
||||
}
|
||||
return state;
|
||||
}
|
||||
|
||||
|
||||
10
keyboards/dz60/keymaps/xtonhasvim/readme.md
Normal file
10
keyboards/dz60/keymaps/xtonhasvim/readme.md
Normal file
@ -0,0 +1,10 @@
|
||||
# Xton has a DZ60 and it's Vimtastic!
|
||||
|
||||
Mine has a split spacebar, no arrowkeys and an opaque case. Changes from the default layout:
|
||||
|
||||
* Vim mode toggled by hitting left spacebar (see `users/xtonhasvim`). Reusing the capslock LED to indicate VIM is on.
|
||||
* Momentary directional control by holding down `;`.
|
||||
* Mousekeys toggled with middle space button.
|
||||
* Escape is dual-function with control (which replaces capslock AS IT SHOULD BE).
|
||||
* Bottom left key is the "halp my kb doesn't work" key that always dumps you back to QWERTY.
|
||||
|
||||
@ -54,3 +54,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
LAYOUTS = 60_ansi
|
||||
@ -34,8 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define TAPPING_TERM 120
|
||||
#define TAPPING_TOGGLE 3
|
||||
/* Use RGB Underglow */
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
@ -17,7 +17,7 @@ extern keymap_config_t keymap_config;
|
||||
#define _ADJUST 4
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE, // デフォルトレイヤー用
|
||||
QWERTY = SAFE_RANGE, // QWERTYレイヤーへ
|
||||
MCR1, // マクロ1
|
||||
MCR2, // マクロ2
|
||||
MCR3, // マクロ3
|
||||
@ -35,14 +35,17 @@ enum custom_keycodes {
|
||||
#define KC_RASE LT(_RAISE, KC_HENK) // タップで変換 ホールドでRaise
|
||||
#define KC_LSLB MT(MOD_LSFT, JP_LBRC) // タップで[ ホールドで左Shift
|
||||
#define KC_RSRB MT(MOD_RSFT, JP_RBRC) // タップで] ホールドで右Shift
|
||||
#define KC_ALTB MT(MOD_LALT, KC_TAB) // タップでTAB ホールドで左ALT
|
||||
#define KC_ESCA LT(_ADJUST,KC_ESC) // タップでESC ホールドでADJUSTレイヤーon
|
||||
#define KC_ALTB MT(MOD_LALT, KC_TAB) // タップでTAB ホールドで左Alt
|
||||
#define CTL_ZH CTL_T(KC_ZKHK) // タップで半角/全角 ホールドで左Control (Windows)
|
||||
#define WN_CAPS S(KC_CAPS) // Caps Lock (Windows)
|
||||
#define KC_ALPS LALT(KC_PSCR) // Alt + PrintScreen
|
||||
#define LOWER MO(_LOWER)
|
||||
#define RAISE MO(_RAISE)
|
||||
#define GAME DF(_GAME)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* QWERTY
|
||||
/* QWERTY // WindowsでJIS配列時のデフォルトキーマップ
|
||||
* ,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
* |Tab/Alt| Q | W | E | R | T | - | | ~ | Y | U | I | O | P | BSPC |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
@ -50,97 +53,123 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | [/Sft | Z | X | C | V | B | F2 | | Home | N | M | , | . | / | ]/Sft |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | TT | GUI | \ | Esc/ | LOWER | Enter | Del | | End | Space | RAISE | Left | Down | Up | Right |
|
||||
* |(_GAME)| | |_ADJUST| 無変換| | | | | | 変換 | | | | |
|
||||
* |WN CAPS| GUI | \ | Esc |無変換 | Enter | Del | | End | Space | 変換 | Left | Down | Up | Right |
|
||||
* | | | | | LOWER | | | | | | RAISE | | | | |
|
||||
* `-------------------------------------------------------' `-------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_QWERTY] = KEYMAP( \
|
||||
KC_ALTB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MINS, JP_TILD, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
CTL_ZH, KC_A, KC_S, KC_D, KC_F, KC_G, JP_LPRN, JP_RPRN, KC_H, KC_J, KC_K, KC_L, WN_SCLN, JP_QUOT, \
|
||||
KC_LSLB, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F2, KC_HOME, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSRB, \
|
||||
TT(_GAME),KC_LGUI, JP_YEN, KC_ESCA, KC_LOWR, KC_ENT, KC_DEL, KC_END, KC_SPC, KC_RASE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
KC_ALTB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MINS, JP_TILD, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
CTL_ZH, KC_A, KC_S, KC_D, KC_F, KC_G, JP_LPRN, JP_RPRN, KC_H, KC_J, KC_K, KC_L, WN_SCLN, JP_QUOT, \
|
||||
KC_LSLB, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F2, KC_HOME, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSRB, \
|
||||
WN_CAPS, KC_LGUI, JP_YEN, KC_ESC, KC_LOWR, KC_ENT, KC_DEL, KC_END, KC_SPC, KC_RASE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
/* LOWER
|
||||
/* LOWER // 数字入力用レイヤー
|
||||
* ,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
* |Tab/Alt| 1 | 2 | 3 | 4 | 5 | 6 | | Esc | 7 | 8 | 9 | O | = | BSPC |
|
||||
* | | 1 | 2 | 3 | 4 | 5 | 6 | | Esc | 7 | 8 | 9 | . | = | |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* |ZH/Ctrl| F1 | F2 | F3 | F4 | F5 | F6 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | Shift | F7 | F8 | F9 | F10 | F11 | F12 | | Home | 1 | 2 | 3 | + | * | Shift |
|
||||
* | Shift | F7 | F8 | F9 | F10 | F11 | F12 | | | 1 | 2 | 3 | + | * | Shift |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* |XXXXXXX| GUI |XXXXXXX| Esc | | Enter | Del | | End | 0 | . | Left | Down | Up | Right |
|
||||
* | | |XXXXXXX| | | | | | | 0 | | | | | |
|
||||
* `-------------------------------------------------------' `-------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_LOWER] = KEYMAP( \
|
||||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_ESC, KC_7, KC_8, KC_9, KC_0, JP_EQL, _______, \
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F2, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_PSLS, KC_ENT, \
|
||||
KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PAST, KC_RSFT, \
|
||||
_______, _______, XXXXXXX, KC_ESC, _______, _______, _______, _______, KC_P0, KC_PDOT, _______, _______, _______, _______ \
|
||||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_ESC, KC_7, KC_8, KC_9, KC_PDOT, JP_EQL, _______, \
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F2, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_PSLS, KC_ENT, \
|
||||
KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PAST, KC_RSFT, \
|
||||
_______, _______, XXXXXXX, _______, _______, _______, _______, _______, KC_0, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
/* RAISE
|
||||
/* RAISE // 記号入力用レイヤー
|
||||
* ,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
* |Tab/Alt| ! | @ | # | $ | % | _ | | ` | ^ | & | Ins | \ |PrntScr| BSPC |
|
||||
* | | ! | @ | # | $ | % | _ | | ` | ^ | & | Ins | \ |PrntScr| |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* |ZH/Ctrl|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| { | | } | Left | Down | Up | Right | ; | " |
|
||||
* | |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| { | | } | Left | Down | Up | Right | ; | " |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | Shift |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| |PageUp |XXXXXXX|XXXXXXX| < | > | ? | Shift |
|
||||
* | Shift |M-PLAY |M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR| |PageUp |XXXXXXX|XXXXXXX| < | > | ? | Shift |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* |XXXXXXX| GUI | | | Esc |XXXXXXX| Enter | Del | |PageDwn| Space | | Left | Down | Up | Right |
|
||||
* | | | | | | | | | |PageDwn| | | | | | |
|
||||
* `-------------------------------------------------------' `-------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_RAISE] = KEYMAP( \
|
||||
_______, KC_EXLM, JP_AT, KC_HASH, KC_DLR, KC_PERC, JP_UNDS, JP_GRV, JP_CIRC, JP_AMPR, KC_INS, JP_YEN, KC_ALPS, _______, \
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, JP_LCBR, JP_RCBR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, JP_DQT, \
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, KC_LT, KC_GT, KC_QUES, KC_RSFT, \
|
||||
_______, _______, JP_PIPE, KC_ESC, XXXXXXX, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______ \
|
||||
_______, KC_EXLM, JP_AT, KC_HASH, KC_DLR, KC_PERC, JP_UNDS, JP_GRV, JP_CIRC, JP_AMPR, KC_INS, JP_YEN, KC_ALPS, _______, \
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, JP_LCBR, JP_RCBR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, JP_DQT, \
|
||||
KC_LSFT, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, KC_PGUP, XXXXXXX, XXXXXXX, KC_LT, KC_GT, KC_QUES, KC_RSFT, \
|
||||
_______, _______, JP_PIPE, _______, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
/* GAME
|
||||
/* GAME // 左手はゲーム用レイヤー、右手はNumPad
|
||||
* ,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
* | Esc | Q | W | E | R | T |PrntScr| | | | | | | | |
|
||||
* | Tab | Q | W | E | R | T |PrntScr| | Esc | 7 | 8 | 9 | . | = | BSPC |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | Ctrl | A | S | D | F | G | F5 | | | | | | | | |
|
||||
* | Ctrl | A | S | D | F | G | F1 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | Shift | Z | X | C | V | B | F2 | |PageUp | | | | | | |
|
||||
* | Shift | Z | X | C | V | B | F2 | | Home | 1 | 2 | 3 | + | * | Shift |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | | GUI | Tab | Alt | Space | Enter | Del | |PageDwn| Space |XXXXXXX| Left | Down | Up | Right |
|
||||
* | Del | GUI | Alt | Esc | LOWER | Space | Enter | | End | 0 | RAISE | Left | Down | Up | Right |
|
||||
* `-------------------------------------------------------' `-------------------------------------------------------'
|
||||
*/
|
||||
[_GAME] = KEYMAP( \
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ALPS, _______, _______, _______, _______, _______, _______, _______, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, JP_LBRC, _______, _______, _______, _______, _______, _______, _______, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F2, KC_PGUP, _______, _______, _______, _______, _______, _______, \
|
||||
_______, KC_LGUI, KC_TAB, KC_LALT, KC_SPC, KC_ENT, KC_DEL, KC_PGDN, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ALPS, KC_ESC, KC_P7, KC_P8, KC_P9, KC_PDOT, JP_EQL, KC_BSPC, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_F1, KC_F2, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_PSLS, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F2, KC_HOME, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PAST, KC_RSFT, \
|
||||
KC_DEL, KC_LGUI, KC_LALT, KC_ESC, LOWER, KC_SPC, KC_ENT, KC_PGDN, KC_P0, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
/* ADJUST
|
||||
/* ADJUST // 設定用レイヤー (LOWER+RAISE)
|
||||
* ,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
* |RGB_TOG| MCR1 | MCR2 | MCR3 |XXXXXXX|XXXXXXX|XXXXXXX| |XXXXXXX|PLAY_M1|PLAY_M2|REC_M1 |REC_M2 |STP_REC| BSPC |
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | RESET |RGB_MOD|_PLAIN |_BREATH|RGB_HuI|RGB_SaI|RGB_VaI| |XXXXXXX|QWERTY |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|
|
||||
* | RESET | | | | | | | |XXXXXXX|XXXXXXX|QWERTY | GAME |XXXXXXX|XXXXXXX|XXXXXXX|
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | Shift |_RAINBW|_SNAKE |_GRADIE|RGB_HuD|RGB_SaD|RGB_VaD| |XXXXXXX| M-PLAY|M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR|
|
||||
* | Shift | | | | | | | |XXXXXXX| M-PLAY|M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR|
|
||||
* |-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
* | DEBUG |XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX|XXXXXXX| Left | Down | Up | Right |
|
||||
* | DEBUG |XXXXXXX|XXXXXXX| | |XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX| | Left | Down | Up | Right |
|
||||
* `-------------------------------------------------------' `-------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_ADJUST] = KEYMAP( \
|
||||
RGB_TOG, MCR1, MCR2, MCR3, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, DYN_REC_START1, DYN_REC_START2, DYN_REC_STOP, KC_BSPC, \
|
||||
RESET, RGB_MOD, RGB_M_P, RGB_M_B, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, QWERTY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
|
||||
KC_LSFT, RGB_M_R, RGB_M_SN,RGB_M_G, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, \
|
||||
DEBUG, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
RGB_TOG, MCR1, MCR2, MCR3, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, DYN_REC_START1, DYN_REC_START2, DYN_REC_STOP, KC_BSPC, \
|
||||
RESET, RGB_MOD, RGB_M_P, RGB_M_B, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, QWERTY, GAME, XXXXXXX, XXXXXXX, XXXXXXX, \
|
||||
KC_LSFT, RGB_M_R, RGB_M_SN,RGB_M_G, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, \
|
||||
DEBUG, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
// RGB Underglow使用時のレイヤー毎のカラー切り替え
|
||||
uint32_t layer_state_set_keymap (uint32_t state) {
|
||||
return state;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_enable();
|
||||
rgblight_setrgb_teal();
|
||||
#endif
|
||||
}
|
||||
|
||||
uint32_t layer_state_set_user(uint32_t state) {
|
||||
state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
switch (biton32(state)) {
|
||||
case _RAISE:
|
||||
rgblight_setrgb_chartreuse(); // RAISE:シャルトリューズ
|
||||
break;
|
||||
case _LOWER:
|
||||
rgblight_setrgb_pink(); // LOWER:ピンク
|
||||
break;
|
||||
case _ADJUST:
|
||||
rgblight_setrgb_red(); // ADJUST:レッド
|
||||
break;
|
||||
default: // for any other layers, or the default layer
|
||||
rgblight_setrgb_teal(); // 他:ティール
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
return state;
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
@ -151,7 +180,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
set_single_persistent_default_layer(_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
@ -171,19 +200,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
break;
|
||||
case MCR1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("hogehoge"); // 送信文字列
|
||||
SEND_STRING("hoge"); // 送信文字列
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case MCR2:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("hogehogehoge"SS_TAP(X_ENTER)); // 送信文字列
|
||||
SEND_STRING("hogehoge"SS_TAP(X_ENTER)); // 送信文字列
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case MCR3:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("hoge@hoge.co.jp"); // 送信文字列
|
||||
SEND_STRING("hoge@hoge.hoge"); // 送信文字列
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
|
||||
@ -6,62 +6,62 @@ Designed for Japanese Keyboardists using JIS on the Ergo42.
|
||||
|
||||
````
|
||||
QWERTY
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|Tab/Alt| Q | W | E | R | T | - | | ~ | Y | U | I | O | P | BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
|ZH/Ctrl| A | S | D | F | G | ( | | ) | H | J | K | L | : | ' |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| [/Sft | Z | X | C | V | B | F2 | | Home | N | M | , | . | / | ]/Sft |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| TT | GUI | \ | Esc/ | LOWER | Enter | Del | | End | Space | RAISE | Left | Down | Up | Right |
|
||||
|(_GAME)| | |_ADJUST| –³•ÏŠ·| | | | | | •ÏŠ· | | | | |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|Tab/Alt| Q | W | E | R | T | - | | ~ | Y | U | I | O | P | BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
|ZH/Ctrl| A | S | D | F | G | ( | | ) | H | J | K | L | : | ' |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| [/Sft | Z | X | C | V | B | F2 | | Home | N | M | , | . | / | ]/Sft |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
|WN CAPS| GUI | \ | Esc | MHEN/ | Enter | Del | | End | Space | HENK/ | Left | Down | Up | Right |
|
||||
| | | | | LOWER | | | | | | RAISE | | | | |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
|
||||
LOWER
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|Tab/Alt| 1 | 2 | 3 | 4 | 5 | 6 | | Esc | 7 | 8 | 9 | O | = | BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Ctrl | F1 | F2 | F3 | F4 | F5 | F6 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift | F7 | F8 | F9 | F10 | F11 | F12 | | Home | 1 | 2 | 3 | + | * | Shift |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
|XXXXXXX| GUI |XXXXXXX| Esc | | Enter | Del | | End | 0 | . | Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
| | 1 | 2 | 3 | 4 | 5 | 6 | | Esc | 7 | 8 | 9 | . | = | |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| | F1 | F2 | F3 | F4 | F5 | F6 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift | F7 | F8 | F9 | F10 | F11 | F12 | | | 1 | 2 | 3 | + | * | Shift |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| | |XXXXXXX| | | | | | | 0 | | | | | |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
|
||||
RAISE
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|Tab/Alt| ! | @ | # | $ | % | _ | | ` | ^ | & | Ins | \ |PrntScr| BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Ctrl |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| { | | } | Left | Down | Up | Right | ; | " |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| |PageUp |XXXXXXX|XXXXXXX| < | > | ? | Shift |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
|XXXXXXX| GUI | | | Esc |XXXXXXX| Enter | Del | |PageDwn| Space | | Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
|
||||
GAME
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
| Esc | Q | W | E | R | T |PrntScr| | | | | | | | |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Ctrl | A | S | D | F | G | F5 | | | | | | | | |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift | Z | X | C | V | B | F2 | |PageUp | | | | | | |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| | GUI | Tab | Alt | Space | Enter | Del | |PageDwn| Space |XXXXXXX| Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
| | ! | @ | # | $ | % | _ | | ` | ^ | & | Ins | \ |PrntScr| |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX| { | | } | Left | Down | Up | Right | ; | " |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| | M-PLAY|M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR| |PageUp |XXXXXXX|XXXXXXX| < | > | ? | Shift |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| | | | | | | | | |PageDwn| | | | | | |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
|
||||
ADJUST
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|RGB_TOG| MCR1 | MCR2 | MCR3 |XXXXXXX|XXXXXXX|XXXXXXX| |XXXXXXX|PLAY_M1|PLAY_M2|REC_M1 |REC_M2 |STP_REC| BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| RESET |RGB_MOD|_PLAIN |_BREATH|RGB_HuI|RGB_SaI|RGB_VaI| |XXXXXXX|QWERTY |XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|XXXXXXX|
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift |_RAINBW|_SNAKE |_GRADIE|RGB_HuD|RGB_SaD|RGB_VaD| |XXXXXXX| M-PLAY|M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR|
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| DEBUG |XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX|XXXXXXX| Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
|RGB_TOG| MCR1 | MCR2 | MCR3 |XXXXXXX|XXXXXXX|XXXXXXX| |XXXXXXX|PLAY_M1|PLAY_M2|REC_M1 |REC_M2 |STP_REC| BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| RESET | | | | | | | |XXXXXXX|XXXXXXX|QWERTY | GAME |XXXXXXX|XXXXXXX|XXXXXXX|
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift | | | | | | | |XXXXXXX| M-PLAY|M-MUTE |VOL_DWN|VOL_UP |PREV_TR|NEXT_TR|
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| DEBUG |XXXXXXX|XXXXXXX| | |XXXXXXX|XXXXXXX| |XXXXXXX|XXXXXXX| | Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
|
||||
GAME
|
||||
,-------------------------------------------------------. ,-------------------------------------------------------.
|
||||
| Tab | Q | W | E | R | T |PrntScr| | Esc | 7 | 8 | 9 | . | = | BSPC |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Ctrl | A | S | D | F | G | F1 | | F2 | 4 | 5 | 6 | - | / | Enter |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Shift | Z | X | C | V | B | F2 | | Home | 1 | 2 | 3 | + | * | Shift |
|
||||
|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------|
|
||||
| Del | GUI | Alt | Esc | LOWER | Space | Enter | | End | 0 | RAISE | Left | Down | Up | Right |
|
||||
`-------------------------------------------------------' `-------------------------------------------------------'
|
||||
````
|
||||
|
||||
## Notes
|
||||
|
||||
Supports RGB Underglow and Dynamic Macros.
|
||||
Supports RGB Underglow color sync to layer switching.
|
||||
|
||||
49
keyboards/facew/config.h
Normal file
49
keyboards/facew/config.h
Normal file
@ -0,0 +1,49 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef FACEW_CONFIG_H
|
||||
#define FACEW_CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define VENDOR_ID 0x20A0
|
||||
#define PRODUCT_ID 0x422D
|
||||
#define MANUFACTURER NotActuallyWinkeyless
|
||||
#define PRODUCT facew
|
||||
|
||||
#define RGBLED_NUM 16
|
||||
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 11
|
||||
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
#define NO_BACKLIGHT_CLOCK
|
||||
#define BACKLIGHT_LEVELS 1
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
#define NO_UART 1
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||
|
||||
#endif
|
||||
66
keyboards/facew/facew.c
Normal file
66
keyboards/facew/facew.c
Normal file
@ -0,0 +1,66 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "facew.h"
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#include "rgblight.h"
|
||||
#endif
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#include "action_layer.h"
|
||||
#include "i2c.h"
|
||||
#include "quantum.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
||||
void rgblight_set(void) {
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_init();
|
||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
||||
}
|
||||
#endif
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
void backlight_init_ports(void) {
|
||||
DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
|
||||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level) {
|
||||
if (level == 0) {
|
||||
// Turn out the lights
|
||||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
|
||||
} else {
|
||||
// Turn on the lights
|
||||
PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
|
||||
}
|
||||
}
|
||||
57
keyboards/facew/facew.h
Normal file
57
keyboards/facew/facew.h
Normal file
@ -0,0 +1,57 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef FACEW_H
|
||||
#define FACEW_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K10, K60,\
|
||||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \
|
||||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \
|
||||
K19, K13, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, K50,\
|
||||
K09, K00, K39, K30, K59, K69, K57, K29\
|
||||
){ \
|
||||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \
|
||||
{ KC_NO, K11, K12, K13, K14, K15, K16, KC_NO, K18, K19, K10}, \
|
||||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \
|
||||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, K50}, \
|
||||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \
|
||||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \
|
||||
}
|
||||
|
||||
#define LAYOUT_60_ansi( \
|
||||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K60,\
|
||||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \
|
||||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \
|
||||
K19, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, \
|
||||
K09, K00, K39, K30, K59, K69, K57, K29\
|
||||
){ \
|
||||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \
|
||||
{ KC_NO, K11, K12, KC_NO, K14, K15, K16, KC_NO, K18, K19, KC_NO}, \
|
||||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \
|
||||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, KC_NO}, \
|
||||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \
|
||||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \
|
||||
}
|
||||
|
||||
#endif
|
||||
106
keyboards/facew/i2c.c
Normal file
106
keyboards/facew/i2c.c
Normal file
@ -0,0 +1,106 @@
|
||||
/*
|
||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
// Please do not modify this file
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/twi.h>
|
||||
|
||||
#include "i2c.h"
|
||||
|
||||
void i2c_set_bitrate(uint16_t bitrate_khz) {
|
||||
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
|
||||
if (bitrate_div >= 16) {
|
||||
bitrate_div = (bitrate_div - 16) / 2;
|
||||
}
|
||||
TWBR = bitrate_div;
|
||||
}
|
||||
|
||||
void i2c_init(void) {
|
||||
// set pull-up resistors on I2C bus pins
|
||||
PORTC |= 0b11;
|
||||
|
||||
i2c_set_bitrate(400);
|
||||
|
||||
// enable TWI (two-wire interface)
|
||||
TWCR |= (1 << TWEN);
|
||||
|
||||
// enable TWI interrupt and slave address ACK
|
||||
TWCR |= (1 << TWIE);
|
||||
TWCR |= (1 << TWEA);
|
||||
}
|
||||
|
||||
uint8_t i2c_start(uint8_t address) {
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
|
||||
// begin transmission and wait for it to end
|
||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if ((TWSR & 0xF8) != TW_START) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
// transmit address and wait
|
||||
TWDR = address;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void i2c_stop(void) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
}
|
||||
|
||||
uint8_t i2c_write(uint8_t data) {
|
||||
TWDR = data;
|
||||
|
||||
// transmit data and wait
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
|
||||
if (i2c_start(address)) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
for (uint16_t i = 0; i < length; i++) {
|
||||
if (i2c_write(data[i])) {
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
27
keyboards/facew/i2c.h
Normal file
27
keyboards/facew/i2c.h
Normal file
@ -0,0 +1,27 @@
|
||||
/*
|
||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
// Please do not modify this file
|
||||
|
||||
#ifndef __I2C_H__
|
||||
#define __I2C_H__
|
||||
|
||||
void i2c_init(void);
|
||||
void i2c_set_bitrate(uint16_t bitrate_khz);
|
||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
|
||||
|
||||
#endif
|
||||
16
keyboards/facew/info.json
Normal file
16
keyboards/facew/info.json
Normal file
@ -0,0 +1,16 @@
|
||||
{
|
||||
"keyboard_name": "FaceW",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
|
||||
},
|
||||
|
||||
"LAYOUT_60_ansi": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
43
keyboards/facew/keymaps/default/keymap.c
Normal file
43
keyboards/facew/keymaps/default/keymap.c
Normal file
@ -0,0 +1,43 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL,
|
||||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, MO(2),
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
51
keyboards/facew/keymaps/mechmerlin/keymap.c
Normal file
51
keyboards/facew/keymaps/mechmerlin/keymap.c
Normal file
@ -0,0 +1,51 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(2),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT
|
||||
),
|
||||
|
||||
[3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
18
keyboards/facew/keymaps/mechmerlin/readme.md
Normal file
18
keyboards/facew/keymaps/mechmerlin/readme.md
Normal file
@ -0,0 +1,18 @@
|
||||
MechMerlin's FaceW Sprit Edition Layout
|
||||
======================
|
||||
|
||||
This is the preferred 60% layout used by u/merlin36, host of the [MechMerlin YouTube channel](www.youtube.com/mechmerlin).
|
||||
|
||||
## Keyboard Notes
|
||||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com)
|
||||
- Uses ps2avru instead of ps2avrgb
|
||||
- To put in reset mode hold `q` while inserting the USB cable
|
||||
- Use flashing instructions from ps2avrgb QMK port
|
||||
|
||||
## Keymap Notes
|
||||
- Does not support any form of inswitch lighting as Merlin hates them.
|
||||
- Arrow toggle switch to the right of right shift
|
||||
- Reset is FN + Left Shift + R
|
||||
|
||||
### Build
|
||||
To build this keymap, simply run `make facew:mechmerlin` from the qmk_firmware directory.
|
||||
106
keyboards/facew/matrix.c
Normal file
106
keyboards/facew/matrix.c
Normal file
@ -0,0 +1,106 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
|
||||
#include "matrix.h"
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
#define DEBOUNCE 5
|
||||
#endif
|
||||
|
||||
static uint8_t debouncing = DEBOUNCE;
|
||||
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
void matrix_init(void) {
|
||||
// all outputs for rows high
|
||||
DDRB = 0xFF;
|
||||
PORTB = 0xFF;
|
||||
// all inputs for columns
|
||||
DDRA = 0x00;
|
||||
DDRC &= ~(0x111111<<2);
|
||||
DDRD &= ~(1<<PIND7);
|
||||
// all columns are pulled-up
|
||||
PORTA = 0xFF;
|
||||
PORTC |= (0b111111<<2);
|
||||
PORTD |= (1<<PIND7);
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix[row] = 0x00;
|
||||
matrix_debouncing[row] = 0x00;
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_set_row_status(uint8_t row) {
|
||||
DDRB = (1 << row);
|
||||
PORTB = ~(1 << row);
|
||||
}
|
||||
|
||||
uint8_t bit_reverse(uint8_t x) {
|
||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
|
||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
|
||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
|
||||
return x;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void) {
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix_set_row_status(row);
|
||||
_delay_us(5);
|
||||
|
||||
matrix_row_t cols = (
|
||||
// cols 0..7, PORTA 0 -> 7
|
||||
(~PINA) & 0xFF
|
||||
) | (
|
||||
// cols 8..13, PORTC 7 -> 0
|
||||
bit_reverse((~PINC) & 0xFF) << 8
|
||||
) | (
|
||||
// col 14, PORTD 7
|
||||
((~PIND) & (1 << PIND7)) << 7
|
||||
);
|
||||
|
||||
if (matrix_debouncing[row] != cols) {
|
||||
matrix_debouncing[row] = cols;
|
||||
debouncing = DEBOUNCE;
|
||||
}
|
||||
}
|
||||
|
||||
if (debouncing) {
|
||||
if (--debouncing) {
|
||||
_delay_ms(1);
|
||||
} else {
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = matrix_debouncing[i];
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
matrix_scan_user();
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline matrix_row_t matrix_get_row(uint8_t row) {
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void) {
|
||||
}
|
||||
24
keyboards/facew/readme.md
Normal file
24
keyboards/facew/readme.md
Normal file
@ -0,0 +1,24 @@
|
||||
# FaceW
|
||||
|
||||
A 60% no frills keyboard.
|
||||
|
||||
The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs
|
||||
but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It
|
||||
is designed and manufactured in Korea. It originally uses BootMapperClient for programming but
|
||||
can now also use QMK.
|
||||
|
||||
Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin)
|
||||
Hardware Supported: FaceW Sprit Edition PCB
|
||||
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352
|
||||
|
||||
## Keyboard Notes
|
||||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com)
|
||||
- Uses ps2avru instead of ps2avrgb
|
||||
- To put in reset mode hold `q` while inserting the USB cable
|
||||
- When flashing, type `bootloadHID -r yourfile.hex` and wait awhile
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make facew:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
52
keyboards/facew/rules.mk
Normal file
52
keyboards/facew/rules.mk
Normal file
@ -0,0 +1,52 @@
|
||||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
#
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation, either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32a
|
||||
PROTOCOL = VUSB
|
||||
|
||||
# unsupported features for now
|
||||
NO_UART = yes
|
||||
NO_SUSPEND_POWER_DOWN = yes
|
||||
|
||||
# processor frequency
|
||||
F_CPU = 12000000
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = bootloadHID
|
||||
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = yes
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = yes
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
# custom matrix setup
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC = matrix.c i2c.c
|
||||
|
||||
# programming options
|
||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||
|
||||
LAYOUTS = 60_ansi
|
||||
396
keyboards/facew/usbconfig.h
Normal file
396
keyboards/facew/usbconfig.h
Normal file
@ -0,0 +1,396 @@
|
||||
/* Name: usbconfig.h
|
||||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
||||
* Author: Christian Starkjohann
|
||||
* Creation Date: 2005-04-01
|
||||
* Tabsize: 4
|
||||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
|
||||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
||||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
|
||||
*/
|
||||
|
||||
#ifndef __usbconfig_h_included__
|
||||
#define __usbconfig_h_included__
|
||||
|
||||
#include "config.h"
|
||||
|
||||
/*
|
||||
General Description:
|
||||
This file is an example configuration (with inline documentation) for the USB
|
||||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
|
||||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
|
||||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
|
||||
other hardware interrupt, as long as it is the highest level interrupt, see
|
||||
section at the end of this file).
|
||||
*/
|
||||
|
||||
/* ---------------------------- Hardware Config ---------------------------- */
|
||||
|
||||
#define USB_CFG_IOPORTNAME D
|
||||
/* This is the port where the USB bus is connected. When you configure it to
|
||||
* "B", the registers PORTB, PINB and DDRB will be used.
|
||||
*/
|
||||
#define USB_CFG_DMINUS_BIT 3
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||
* This may be any bit in the port.
|
||||
*/
|
||||
#define USB_CFG_DPLUS_BIT 2
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||
* This may be any bit in the port. Please note that D+ must also be connected
|
||||
* to interrupt pin INT0! [You can also use other interrupts, see section
|
||||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
|
||||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
|
||||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
|
||||
* markers every millisecond.]
|
||||
*/
|
||||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
|
||||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
|
||||
* require no crystal, they tolerate +/- 1% deviation from the nominal
|
||||
* frequency. All other rates require a precision of 2000 ppm and thus a
|
||||
* crystal!
|
||||
* Since F_CPU should be defined to your actual clock rate anyway, you should
|
||||
* not need to modify this setting.
|
||||
*/
|
||||
#define USB_CFG_CHECK_CRC 0
|
||||
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
|
||||
* currently only available for 18 MHz crystal clock. You must choose
|
||||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
|
||||
*/
|
||||
|
||||
/* ----------------------- Optional Hardware Config ------------------------ */
|
||||
|
||||
/* #define USB_CFG_PULLUP_IOPORTNAME D */
|
||||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||
* V+, you can connect and disconnect the device from firmware by calling
|
||||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
|
||||
* This constant defines the port on which the pullup resistor is connected.
|
||||
*/
|
||||
/* #define USB_CFG_PULLUP_BIT 4 */
|
||||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||
* above) where the 1.5k pullup resistor is connected. See description
|
||||
* above for details.
|
||||
*/
|
||||
|
||||
/* --------------------------- Functional Range ---------------------------- */
|
||||
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
|
||||
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
|
||||
* number).
|
||||
*/
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
|
||||
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
|
||||
* configured below) and a catch-all default interrupt-in endpoint as above.
|
||||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
|
||||
*/
|
||||
#define USB_CFG_EP3_NUMBER 3
|
||||
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||
* endpoint number (except 0) with this macro. Default if undefined is 3.
|
||||
*/
|
||||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
|
||||
/* The above macro defines the startup condition for data toggling on the
|
||||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
|
||||
* Since the token is toggled BEFORE sending any data, the first packet is
|
||||
* sent with the oposite value of this configuration!
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_HALT 0
|
||||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
|
||||
* it is required by the standard. We have made it a config option because it
|
||||
* bloats the code considerably.
|
||||
*/
|
||||
#define USB_CFG_SUPPRESS_INTR_CODE 0
|
||||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||
* want to send any data over them. If this macro is defined to 1, functions
|
||||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
|
||||
* you need the interrupt-in endpoints in order to comply to an interface
|
||||
* (e.g. HID), but never want to send any data. This option saves a couple
|
||||
* of bytes in flash memory and the transmit buffers in RAM.
|
||||
*/
|
||||
#define USB_CFG_INTR_POLL_INTERVAL 1
|
||||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||
* interval. The value is in milliseconds and must not be less than 10 ms for
|
||||
* low speed devices.
|
||||
*/
|
||||
#define USB_CFG_IS_SELF_POWERED 0
|
||||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||
* device is powered from the USB bus.
|
||||
*/
|
||||
#define USB_CFG_MAX_BUS_POWER 500
|
||||
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||
* The value is in milliamperes. [It will be divided by two since USB
|
||||
* communicates power requirements in units of 2 mA.]
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITE 1
|
||||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||
* transfers. Set it to 0 if you don't need it and want to save a couple of
|
||||
* bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_READ 0
|
||||
/* Set this to 1 if you need to send control replies which are generated
|
||||
* "on the fly" when usbFunctionRead() is called. If you only want to send
|
||||
* data from a static buffer, set it to 0 and return the data from
|
||||
* usbFunctionSetup(). This saves a couple of bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
|
||||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||
* You must implement the function usbFunctionWriteOut() which receives all
|
||||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
|
||||
* can be found in 'usbRxToken'.
|
||||
*/
|
||||
#define USB_CFG_HAVE_FLOWCONTROL 0
|
||||
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
|
||||
* usbdrv.h.
|
||||
*/
|
||||
#define USB_CFG_DRIVER_FLASH_PAGE 0
|
||||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||
* where the driver's constants (descriptors) are located. Or in other words:
|
||||
* Define this to 1 for boot loaders on the ATMega128.
|
||||
*/
|
||||
#define USB_CFG_LONG_TRANSFERS 0
|
||||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||
* in a single control-in or control-out transfer. Note that the capability
|
||||
* for long transfers increases the driver size.
|
||||
*/
|
||||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
|
||||
/* This macro is a hook if you want to do unconventional things. If it is
|
||||
* defined, it's inserted at the beginning of received message processing.
|
||||
* If you eat the received message and don't want default processing to
|
||||
* proceed, do a return after doing your things. One possible application
|
||||
* (besides debugging) is to flash a status LED on each packet.
|
||||
*/
|
||||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
|
||||
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||
* one parameter which distinguishes between the start of RESET state and its
|
||||
* end.
|
||||
*/
|
||||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
|
||||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||
* received.
|
||||
*/
|
||||
#define USB_COUNT_SOF 1
|
||||
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||
* counts SOF packets. This feature requires that the hardware interrupt is
|
||||
* connected to D- instead of D+.
|
||||
*/
|
||||
/* #ifdef __ASSEMBLER__
|
||||
* macro myAssemblerMacro
|
||||
* in YL, TCNT0
|
||||
* sts timer0Snapshot, YL
|
||||
* endm
|
||||
* #endif
|
||||
* #define USB_SOF_HOOK myAssemblerMacro
|
||||
* This macro (if defined) is executed in the assembler module when a
|
||||
* Start Of Frame condition is detected. It is recommended to define it to
|
||||
* the name of an assembler macro which is defined here as well so that more
|
||||
* than one assembler instruction can be used. The macro may use the register
|
||||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
|
||||
* immediately after an SOF pulse may be lost and must be retried by the host.
|
||||
* What can you do with this hook? Since the SOF signal occurs exactly every
|
||||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
|
||||
* designs running on the internal RC oscillator.
|
||||
* Please note that Start Of Frame detection works only if D- is wired to the
|
||||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
|
||||
*/
|
||||
#define USB_CFG_CHECK_DATA_TOGGLING 0
|
||||
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||
* sent by the host. Duplicates occur only as a consequence of communication
|
||||
* errors, when the host does not receive an ACK. Please note that you need to
|
||||
* implement the filtering yourself in usbFunctionWriteOut() and
|
||||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
|
||||
* for each control- and out-endpoint to check for duplicate packets.
|
||||
*/
|
||||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
|
||||
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
|
||||
*/
|
||||
#define USB_USE_FAST_CRC 0
|
||||
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||
* faster, the other is smaller. This CRC routine is only used for transmitted
|
||||
* messages where timing is not critical. The faster routine needs 31 cycles
|
||||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
|
||||
* may be worth the 32 bytes bigger code size if you transmit lots of data and
|
||||
* run the AVR close to its limit.
|
||||
*/
|
||||
|
||||
/* -------------------------- Device Description --------------------------- */
|
||||
|
||||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
|
||||
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
|
||||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
|
||||
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||
* scope of the vendor ID. If you have registered your own VID with usb.org
|
||||
* or if you have licensed a PID from somebody else, define it here. Otherwise
|
||||
* you may use one of obdev's free shared VID/PID pairs. See the file
|
||||
* USB-IDs-for-free.txt for details!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02
|
||||
/* Version number of the device: Minor number first, then major number.
|
||||
*/
|
||||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
|
||||
#define USB_CFG_VENDOR_NAME_LEN 13
|
||||
/* These two values define the vendor name returned by the USB device. The name
|
||||
* must be given as a list of characters under single quotes. The characters
|
||||
* are interpreted as Unicode (UTF-16) entities.
|
||||
* If you don't want a vendor name string, undefine these macros.
|
||||
* ALWAYS define a vendor name containing your Internet domain name if you use
|
||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||
* details.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
|
||||
#define USB_CFG_DEVICE_NAME_LEN 8
|
||||
/* Same as above for the device name. If you don't want a device name, undefine
|
||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||
* you use a shared VID/PID.
|
||||
*/
|
||||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
|
||||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
|
||||
/* Same as above for the serial number. If you don't want a serial number,
|
||||
* undefine the macros.
|
||||
* It may be useful to provide the serial number through other means than at
|
||||
* compile time. See the section about descriptor properties below for how
|
||||
* to fine tune control over USB descriptors such as the string descriptor
|
||||
* for the serial number.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_CLASS 0
|
||||
#define USB_CFG_DEVICE_SUBCLASS 0
|
||||
/* See USB specification if you want to conform to an existing device class.
|
||||
* Class 0xff is "vendor specific".
|
||||
*/
|
||||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
|
||||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
|
||||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
|
||||
/* See USB specification if you want to conform to an existing device class or
|
||||
* protocol. The following classes must be set at interface level:
|
||||
* HID class is 3, no subclass and protocol required (but may be useful!)
|
||||
* CDC class is 2, use subclass 2 and protocol 1 for ACM
|
||||
*/
|
||||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
|
||||
/* Define this to the length of the HID report descriptor, if you implement
|
||||
* an HID device. Otherwise don't define it or define it to 0.
|
||||
* If you use this define, you must add a PROGMEM character array named
|
||||
* "usbHidReportDescriptor" to your code which contains the report descriptor.
|
||||
* Don't forget to keep the array and this define in sync!
|
||||
*/
|
||||
|
||||
/* #define USB_PUBLIC static */
|
||||
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||
* This technique saves a couple of bytes in flash memory.
|
||||
*/
|
||||
|
||||
/* ------------------- Fine Control over USB Descriptors ------------------- */
|
||||
/* If you don't want to use the driver's default USB descriptors, you can
|
||||
* provide our own. These can be provided as (1) fixed length static data in
|
||||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
|
||||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
|
||||
* information about this function.
|
||||
* Descriptor handling is configured through the descriptor's properties. If
|
||||
* no properties are defined or if they are 0, the default descriptor is used.
|
||||
* Possible properties are:
|
||||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
|
||||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
|
||||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
|
||||
* you want RAM pointers.
|
||||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
|
||||
* in static memory is in RAM, not in flash memory.
|
||||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
|
||||
* the driver must know the descriptor's length. The descriptor itself is
|
||||
* found at the address of a well known identifier (see below).
|
||||
* List of static descriptor names (must be declared PROGMEM if in flash):
|
||||
* char usbDescriptorDevice[];
|
||||
* char usbDescriptorConfiguration[];
|
||||
* char usbDescriptorHidReport[];
|
||||
* char usbDescriptorString0[];
|
||||
* int usbDescriptorStringVendor[];
|
||||
* int usbDescriptorStringDevice[];
|
||||
* int usbDescriptorStringSerialNumber[];
|
||||
* Other descriptors can't be provided statically, they must be provided
|
||||
* dynamically at runtime.
|
||||
*
|
||||
* Descriptor properties are or-ed or added together, e.g.:
|
||||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
|
||||
*
|
||||
* The following descriptors are defined:
|
||||
* USB_CFG_DESCR_PROPS_DEVICE
|
||||
* USB_CFG_DESCR_PROPS_CONFIGURATION
|
||||
* USB_CFG_DESCR_PROPS_STRINGS
|
||||
* USB_CFG_DESCR_PROPS_STRING_0
|
||||
* USB_CFG_DESCR_PROPS_STRING_VENDOR
|
||||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
|
||||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
|
||||
* USB_CFG_DESCR_PROPS_HID
|
||||
* USB_CFG_DESCR_PROPS_HID_REPORT
|
||||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
|
||||
*
|
||||
* Note about string descriptors: String descriptors are not just strings, they
|
||||
* are Unicode strings prefixed with a 2 byte header. Example:
|
||||
* int serialNumberDescriptor[] = {
|
||||
* USB_STRING_DESCRIPTOR_HEADER(6),
|
||||
* 'S', 'e', 'r', 'i', 'a', 'l'
|
||||
* };
|
||||
*/
|
||||
|
||||
#define USB_CFG_DESCR_PROPS_DEVICE 0
|
||||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||
#define USB_CFG_DESCR_PROPS_STRINGS 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_0 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
|
||||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_HID 0
|
||||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
|
||||
|
||||
#define usbMsgPtr_t unsigned short
|
||||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
|
||||
* a scalar type here because gcc generates slightly shorter code for scalar
|
||||
* arithmetics than for pointer arithmetics. Remove this define for backward
|
||||
* type compatibility or define it to an 8 bit type if you use data in RAM only
|
||||
* and all RAM is below 256 bytes (tiny memory model in IAR CC).
|
||||
*/
|
||||
|
||||
/* ----------------------- Optional MCU Description ------------------------ */
|
||||
|
||||
/* The following configurations have working defaults in usbdrv.h. You
|
||||
* usually don't need to set them explicitly. Only if you want to run
|
||||
* the driver on a device which is not yet supported or with a compiler
|
||||
* which is not fully supported (such as IAR C) or if you use a differnt
|
||||
* interrupt than INT0, you may have to define some of these.
|
||||
*/
|
||||
/* #define USB_INTR_CFG MCUCR */
|
||||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
|
||||
/* #define USB_INTR_CFG_CLR 0 */
|
||||
/* #define USB_INTR_ENABLE GIMSK */
|
||||
/* #define USB_INTR_ENABLE_BIT INT0 */
|
||||
/* #define USB_INTR_PENDING GIFR */
|
||||
/* #define USB_INTR_PENDING_BIT INTF0 */
|
||||
/* #define USB_INTR_VECTOR INT0_vect */
|
||||
|
||||
/* Set INT1 for D- falling edge to count SOF */
|
||||
/* #define USB_INTR_CFG EICRA */
|
||||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
|
||||
/* #define USB_INTR_CFG_CLR 0 */
|
||||
/* #define USB_INTR_ENABLE EIMSK */
|
||||
#define USB_INTR_ENABLE_BIT INT1
|
||||
/* #define USB_INTR_PENDING EIFR */
|
||||
#define USB_INTR_PENDING_BIT INTF1
|
||||
#define USB_INTR_VECTOR INT1_vect
|
||||
|
||||
#endif /* __usbconfig_h_included__ */
|
||||
@ -87,4 +87,6 @@
|
||||
/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_ansi KEYMAP_TKL
|
||||
|
||||
#endif
|
||||
|
||||
@ -69,3 +69,5 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC += matrix.c
|
||||
|
||||
LAYOUTS = tkl_ansi
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
"width": 14.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"KEYMAP": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
|
||||
}
|
||||
}
|
||||
|
||||
@ -8,4 +8,4 @@ RGBLIGHT_ENABLE = yes
|
||||
AUDIO_ENABLE = yes
|
||||
NKRO_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
SWAP_HANDS_ENABLE = yes
|
||||
|
||||
@ -183,7 +183,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// `----+----+----' `----+----+----'
|
||||
),
|
||||
|
||||
[_ADJUST] = KEYMAP(
|
||||
[_ADJUST] = LAYOUT(
|
||||
//,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
|
||||
GAMING , DVORAK, WORKMAN, COLEMAK, QWERTY , KC_RST, _______, _______, _______, _______, KC_PWR, RESET,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
|
||||
@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// `----+----+----' `----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = KEYMAP(
|
||||
[_LOWER] = LAYOUT(
|
||||
//,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
|
||||
NO_TILD,KC_EXLM,NO_AT ,KC_HASH,NO_DLR ,KC_PERC, NO_CIRC,NO_AMPR,NO_ASTR,NO_SLSH,NO_LPRN,NO_RPRN,
|
||||
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
||||
@ -57,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// `-------+-------+-------' `-------+-------+-------'
|
||||
),
|
||||
|
||||
[_RAISE] = KEYMAP(
|
||||
[_RAISE] = LAYOUT(
|
||||
//,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
|
||||
KC_F12 ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 , KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_F11 ,
|
||||
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
||||
|
||||
@ -27,6 +27,8 @@ enum custom_keycodes {
|
||||
ONEHANDL,
|
||||
RLAYER,
|
||||
LLAYER,
|
||||
RLOCK,
|
||||
LLOCK,
|
||||
DUAL,
|
||||
CONFIG,
|
||||
};
|
||||
@ -44,13 +46,15 @@ enum {
|
||||
/* LAYERS */
|
||||
#define KC_LLAY LLAYER
|
||||
#define KC_RLAY RLAYER
|
||||
#define KC_RLOK RLOCK
|
||||
#define KC_LLOK LLOCK
|
||||
#define KC_QWER QWERTY
|
||||
#define KC_DVOR DVORAK
|
||||
#define KC_COLE COLEMAK
|
||||
#define KC_ONER ONEHANDR
|
||||
#define KC_ONEL ONEHANDL
|
||||
#define KC_DUAL DUAL
|
||||
#define KC_CONF OSL(_CONFIG)
|
||||
#define KC_CONF CONFIG
|
||||
|
||||
/* Custom Shortened Keys */
|
||||
#define KC_MCTB LCTL(KC_TAB)
|
||||
@ -71,7 +75,7 @@ enum {
|
||||
#define KC_BLUP BL_INC
|
||||
#define KC_BLDN BL_DEC
|
||||
#define KC_SYSR KC_SYSREQ
|
||||
#define KC_FLASH RESET
|
||||
#define KC_REST RESET
|
||||
|
||||
/* Tap Dance */
|
||||
#define KC_LGUA TD(TD_LGUIAPP)
|
||||
@ -82,13 +86,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LEAD, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
XXXX, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,DEL ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
CTEC, A , S , D , F , G , H , J , K , L ,SCLN,ENT ,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
SHCL, Z , X , C , V , B ,XXXX, XXXX, N , M ,COMM,DOT ,SLSH,RSFT,
|
||||
SHCL, Z , X , C , V , B ,LLOK, RLOK, N , M ,COMM,DOT ,SLSH,RSFT,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
LALT,LLAY,TAB , SPC ,RLAY,LGUA
|
||||
// `----+----+----' `----+----+----'
|
||||
@ -96,13 +100,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_COLEMAK] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LEAD, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
XXXX, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,DEL ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
CTEC, A , R , S , T , D , H , N , E , I ,SCLN,ENT ,
|
||||
CTEC, A , R , S , T , D , H , N , E , I , O ,ENT ,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
SHCL, Z , X , C , V , B ,XXXX, XXXX, K , M ,COMM,DOT ,SLSH,RSFT,
|
||||
SHCL, Z , X , C , V , B ,LLOK, RLOK, K , M ,COMM,DOT ,SLSH,RSFT,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
LALT,LLAY,TAB , SPC ,RLAY,LGUA
|
||||
// `----+----+----' `----+----+----'
|
||||
@ -110,13 +114,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_DVORAK] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LEAD, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
XXXX, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,SLSH,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
CTEC, A , O , E , U , I , D , H , T , N , S ,ENT ,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
SHCL,SCLN, Q , J , K , X ,XXXX, XXXX, B , M , W , V , Z ,EQL ,
|
||||
SHCL,SCLN, Q , J , K , X ,LLOK, RLOK, B , M , W , V , Z ,EQL ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
LALT,LLAY,TAB , SPC ,RLAY,LGUA
|
||||
// `----+----+----' `----+----+----'
|
||||
@ -138,7 +142,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_ONEHANDL] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
XXXX,XXXX,XXXX,XXXX,XXXX,XXXX, 5 , 4 , 3 , 2 , 1 ,LEAD,
|
||||
XXXX,XXXX,XXXX,XXXX,XXXX,XXXX, 5 , 4 , 3 , 2 , 1 ,XXXX,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
XXXX,XXXX,XXXX,XXXX,XXXX,XXXX, T , R , E , W , Q ,TAB ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -152,13 +156,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_RLAYER] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,XXXX,XXXX,XXXX,XXXX,XXXX, MUTE,VOLD,VOLU,BLDN,BLUP, ,
|
||||
,SLCK,SYSR,PSCR,INS ,PAUS, MUTE,VOLD,VOLU,BLDN,BLUP, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,TILD,GRV ,EQL ,LBRC,RBRC, PGUP,ASTR, UP ,AMPR,CIRC, ,
|
||||
,TILD,GRV ,EQL ,LBRC,RBRC, ASTR,HOME, UP ,PGUP,PLUS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,EXLM,PIPE,DLR ,LPRN,RPRN, HOME,LEFT,DOWN,RGHT,END ,QUOT,
|
||||
,EXLM,PIPE,DLR ,LPRN,RPRN, AMPR,LEFT,DOWN,RGHT,MINS,QUOT,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
, AT ,HASH,PERC,LCBR,RCBR,LGUI, ,PGDN,UNDS,MINS,PLUS,BSLS, ,
|
||||
, AT ,HASH,PERC,LCBR,RCBR, , ,CIRC,END ,UNDS,PGDN,BSLS, ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
, , , , ,
|
||||
// `----+----+----' `----+----+----'
|
||||
@ -172,7 +176,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,XXXX,MCST,DOWN,MCTB,ENT , SLSH, 4 , 5 , 6 ,MINS, ,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
,XXXX,XXXX,BSPC,SPC ,SINS,F11 , F12 ,EQL , 1 , 2 , 3 ,DOT , ,
|
||||
,XXXX,XXXX,BSPC,SINS,SPC ,F11 , F12 ,EQL , 1 , 2 , 3 ,DOT , ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
, , , 0 , ,
|
||||
// `----+----+----' `----+----+----'
|
||||
@ -180,7 +184,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_DUAL] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,XXXX,XXXX,PSCR,INS ,XXXX, XXXX,SLEP,SLCK,PAUS,SYSR,XXXX,
|
||||
,XXXX,XXXX,XXXX,XXXX,XXXX, XXXX,XXXX,XXXX,XXXX,XXXX,XXXX,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,XXXX,XXXX,XXXX,XXXX,XXXX, XXXX,XXXX,MS_U,XXXX,XXXX,MCAD,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -194,7 +198,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_CONFIG] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
FLASH,XXXX,XXXX,XXXX,XXXX,XXXX, XXXX,XXXX,XXXX,XXXX,XXXX,XXXX,
|
||||
REST,XXXX,XXXX,XXXX,XXXX,XXXX, XXXX,XXXX,XXXX,XXXX,XXXX,XXXX,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
XXXX,QWER,XXXX,XXXX,XXXX,XXXX, XXXX,XXXX,XXXX,ONER,XXXX,XXXX,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -237,6 +241,11 @@ void persistent_default_layer_set(uint16_t default_layer) {
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
/* Variables for layer light toggling */
|
||||
static uint16_t currentBL = 0;
|
||||
static uint16_t rlocked = 0;
|
||||
static uint16_t llocked = 0;
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
@ -263,14 +272,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case CONFIG:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(_CONFIG);
|
||||
backlight_toggle();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RLAYER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RLAYER);
|
||||
update_tri_layer(_RLAYER, _LLAYER, _DUAL);
|
||||
/* add logic to toggle backlight change when on a layer */
|
||||
currentBL = get_backlight_level();
|
||||
if ( currentBL == 0 || currentBL == 1 ) {
|
||||
backlight_set(5);
|
||||
} else {
|
||||
backlight_set(0);
|
||||
}
|
||||
} else {
|
||||
unregister_code(KC_LGUI);
|
||||
rlocked = 0;
|
||||
layer_off(_RLAYER);
|
||||
update_tri_layer(_RLAYER, _LLAYER, _DUAL);
|
||||
if ( llocked == 0 ) {
|
||||
backlight_set(currentBL);
|
||||
} else {
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
@ -278,9 +306,51 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LLAYER);
|
||||
update_tri_layer(_RLAYER, _LLAYER, _DUAL);
|
||||
/* add logic to toggle backlight change when on a layer */
|
||||
currentBL = get_backlight_level();
|
||||
if ( currentBL == 0 || currentBL == 1 ) {
|
||||
backlight_set(5);
|
||||
} else {
|
||||
backlight_set(0);
|
||||
}
|
||||
} else {
|
||||
llocked = 0;
|
||||
layer_off(_LLAYER);
|
||||
update_tri_layer(_RLAYER, _LLAYER, _DUAL);
|
||||
if ( rlocked == 0 ) {
|
||||
backlight_set(currentBL);
|
||||
} else {
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RLOCK:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RLAYER);
|
||||
/* add logic to toggle backlight change when on a layer */
|
||||
rlocked = 1;
|
||||
currentBL = get_backlight_level();
|
||||
if ( currentBL == 0 || currentBL == 1 ) {
|
||||
backlight_set(5);
|
||||
} else {
|
||||
backlight_set(0);
|
||||
}
|
||||
} else {
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LLOCK:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LLAYER);
|
||||
/* add logic to toggle backlight change when on a layer */
|
||||
llocked = 1;
|
||||
currentBL = get_backlight_level();
|
||||
if ( currentBL == 0 || currentBL == 1 ) {
|
||||
backlight_set(5);
|
||||
} else {
|
||||
backlight_set(0);
|
||||
}
|
||||
} else {
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
|
||||
@ -20,3 +20,23 @@ void matrix_init_kb(void) {
|
||||
|
||||
matrix_init_user();
|
||||
};
|
||||
|
||||
|
||||
#ifdef SWAP_HANDS_ENABLE
|
||||
__attribute__ ((weak))
|
||||
// swap-hands action needs a matrix to define the swap
|
||||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Left hand, matrix positions */
|
||||
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
|
||||
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
|
||||
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
|
||||
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
|
||||
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
|
||||
/* Right hand, matrix positions */
|
||||
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
|
||||
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
|
||||
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
|
||||
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
|
||||
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -20,3 +20,23 @@ void matrix_init_kb(void) {
|
||||
|
||||
matrix_init_user();
|
||||
};
|
||||
|
||||
|
||||
#ifdef SWAP_HANDS_ENABLE
|
||||
__attribute__ ((weak))
|
||||
// swap-hands action needs a matrix to define the swap
|
||||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Left hand, matrix positions */
|
||||
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
|
||||
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
|
||||
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
|
||||
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
|
||||
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
|
||||
/* Right hand, matrix positions */
|
||||
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
|
||||
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
|
||||
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
|
||||
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
|
||||
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -20,3 +20,23 @@ void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
};
|
||||
|
||||
|
||||
#ifdef SWAP_HANDS_ENABLE
|
||||
__attribute__ ((weak))
|
||||
// swap-hands action needs a matrix to define the swap
|
||||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Left hand, matrix positions */
|
||||
{{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
|
||||
{{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
|
||||
{{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
|
||||
{{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
|
||||
{{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
|
||||
/* Right hand, matrix positions */
|
||||
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
|
||||
{{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
|
||||
{{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
|
||||
{{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
|
||||
{{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
@ -67,6 +67,28 @@ void matrix_init_user(void); // TODO port this to other PS2AVRGB boards
|
||||
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
|
||||
) \
|
||||
KEYMAP_GRID( \
|
||||
KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
|
||||
KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
|
||||
KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
|
||||
KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
|
||||
)
|
||||
|
||||
|
||||
#define KEYMAP KEYMAP_MIT
|
||||
|
||||
#define LAYOUT_ortho_4x12 KEYMAP_GRID
|
||||
|
||||
#define LAYOUT_2U_space KEYMAP_MIT
|
||||
#define LAYOUT_planck_mit KEYMAP_MIT
|
||||
|
||||
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
|
||||
#define LAYOUT_kc_ortho_4x12 KC_KEYMAP
|
||||
|
||||
#endif
|
||||
|
||||
@ -1,70 +0,0 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
// #include "keycode.h"
|
||||
// #include "action.h"
|
||||
|
||||
#define KEYMAP_GRID( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_MIT( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K3X, KC_NO, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_OFFSET( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP KEYMAP_GRID
|
||||
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
|
||||
|
||||
#endif
|
||||
@ -1,6 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "keymap_uk.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
@ -54,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Fn | Ctrl | Alt | GUI |Lower | Bksp |Space |Raise | Shift| MENU | Ctrl | Fn2 |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP(\
|
||||
[_QWERTY] = LAYOUT_ortho_4x12(\
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC ,\
|
||||
MT(MOD_LSFT, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT) ,\
|
||||
KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSHIFT ,\
|
||||
@ -72,7 +70,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Fn | Ctrl | Alt | GUI |Lower | Bksp |Space |Mouse | MENU | Alt | Ctrl | Fn |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FUNC] = KEYMAP(\
|
||||
[_FUNC] = LAYOUT_ortho_4x12(\
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 ,\
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, UK_TILD, KC_INSERT ,\
|
||||
KC_LSHIFT, KC_NONUS_BSLASH, KC_GRAVE, KC_NONUS_HASH, KC_PAST, KC_MINS, KC_EQL, KC_BSLASH, KC_LBRC, KC_RBRC, KC_QUOT, MT(MOD_RSFT, KC_ENT) ,\
|
||||
@ -90,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | |Lower | Del |Space | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP(\
|
||||
[_LOWER] = LAYOUT_ortho_4x12(\
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_BSPC ,\
|
||||
LSFT(KC_1), LSFT(KC_2), LSFT(KC_3), LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), LCTL(KC_DEL), LCTL(KC_BSPC) ,\
|
||||
KC_LSPO, KC_NONUS_BSLASH, KC_GRAVE, KC_NONUS_HASH, KC_QUOT, KC_MINS, KC_EQL, KC_NONUS_HASH, KC_LBRC, KC_RBRC, KC_QUOT, MT(MOD_RSFT, KC_ENT) ,\
|
||||
@ -108,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Mouse| | | | | Alt | Enter|Raise | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP(\
|
||||
[_RAISE] = LAYOUT_ortho_4x12(\
|
||||
KC_GRV, XXXXXXX, M(1), KC_LBRC, KC_RBRC, XXXXXXX, XXXXXXX, KC_PGUP, KC_HOME, KC_PGDOWN, XXXXXXX, KC_PSCREEN ,\
|
||||
KC_GRV, XXXXXXX, XXXXXXX, LSFT(KC_9), LSFT(KC_0), XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, LCTL(LSFT(KC_EQL)) ,\
|
||||
_______, XXXXXXX, XXXXXXX, LSFT(KC_LBRC), LSFT(KC_RBRC), XXXXXXX, LCTL(KC_LEFT), KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_RIGHT), LCTL(KC_MINS) ,\
|
||||
@ -126,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = KEYMAP(\
|
||||
[_ADJUST] = LAYOUT_ortho_4x12(\
|
||||
M(0), RESET, QWERTY, BL_ON, BL_OFF, DYN_REC_START1, DYN_REC_START2, _______, _______, _______, _______, KC_DEL ,\
|
||||
KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, KC_AUDIO_MUTE, KC_AUDIO_VOL_UP, KC_MEDIA_PLAY_PAUSE, _______, _______ ,\
|
||||
TG(_MAC), RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, DYN_REC_STOP, DYN_REC_STOP, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK, _______, _______ ,\
|
||||
@ -144,7 +142,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_MOUSE] = KEYMAP(\
|
||||
[_MOUSE] = LAYOUT_ortho_4x12(\
|
||||
KC_ESC , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______,\
|
||||
KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______,\
|
||||
@ -162,42 +160,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FUNC2] = KEYMAP(\
|
||||
[_FUNC2] = LAYOUT_ortho_4x12(\
|
||||
_______, _______, M(1), _______, _______, _______, M(5), _______, _______, _______, _______, _______,\
|
||||
_______, _______, M(3), M(7), _______, _______, _______, M(10), _______, _______, _______, _______,\
|
||||
_______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, _______, _______, _______, _______, M(98), \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
[_MAC]= KEYMAP(\
|
||||
[_MAC]= LAYOUT_ortho_4x12(\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
MFNC, _______, _______, _______, MLWR, _______, _______, MRSE, _______, _______, _______, MFNC2 \
|
||||
),
|
||||
|
||||
[_MLWR] = KEYMAP(\
|
||||
[_MLWR] = LAYOUT_ortho_4x12(\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
[_MRSE] = KEYMAP(\
|
||||
[_MRSE] = LAYOUT_ortho_4x12(\
|
||||
_______, _______, M(2), _______, _______, _______, _______, _______, _______, _______, _______, _______ ,\
|
||||
_______, _______, _______, _______, _______, _______, _______, LCTL(KC_A), _______, LCTL(KC_E), _______, LGUI(KC_EQL) ,\
|
||||
_______, _______, _______, _______, _______, _______, LALT(KC_LEFT), _______, _______, _______, LALT(KC_RIGHT), LGUI(KC_MINS) ,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
[_MFNC]= KEYMAP(\
|
||||
[_MFNC]= LAYOUT_ortho_4x12(\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_PENT) ,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ,\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
[_MFNC2] = KEYMAP(\
|
||||
[_MFNC2] = LAYOUT_ortho_4x12(\
|
||||
_______, _______, M(2), _______, _______, _______, M(6), _______, _______, _______, _______, _______,\
|
||||
_______, _______, M(4), M(8), _______, _______, _______, M(10), _______, _______, _______, _______,\
|
||||
_______, LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), _______, _______, _______, _______, _______, _______, M(99), \
|
||||
|
||||
@ -1,5 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define LT_1 RALT(KC_1)
|
||||
#define LT_2 RALT(KC_2)
|
||||
@ -64,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | Fn | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_2U_space( \
|
||||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -86,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | | | Alt |Lower|| Space | | Home | PgDn | PgUp | End |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
[_LOWER] = LAYOUT_2U_space( \
|
||||
KC_GRV, LT_A_OG, LT_C_CA, LT_E_OG, LT_E_DO, LT_I_OG, LT_S_CA, LT_U_OG, LT_U_MA, LT_Z_CA, KC_MINS, KC_BSPC, \
|
||||
KC_TAB, LT_EXLM, LT_AT, LT_HASH, LT_DLR, LT_PERC, LT_CIRC, LT_AMPR, LT_ASTR, KC_LPRN, KC_RPRN, KC_DEL , \
|
||||
KC_LSFT, KC_PEQL, KC_PPLS, KC_PMNS, KC_PIPE, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_LCBR, KC_RCBR, KC_INS , \
|
||||
@ -108,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | | | Alt | | Space |Raise|| Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
[_RAISE] = LAYOUT_2U_space( \
|
||||
KC_GRV, LT_1, LT_2, LT_3, LT_4, LT_5, LT_6, LT_7, LT_8, LT_9, LT_0, KC_BSPC, \
|
||||
KC_TAB, LT_4, LT_5, LT_6, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, \
|
||||
KC_LSFT, LT_7, LT_8, LT_9, LT_0, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -131,7 +130,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl |||Fn||| Mode | Alt | | Space |MPrev |MStop |MNext |MPlay | Lock |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FUNC] = KEYMAP( \
|
||||
[_FUNC] = LAYOUT_2U_space( \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_CAPS, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, BL_TOGG, BL_BRTG, BL_INC, _______, _______, _______, KC_VOLU, \
|
||||
KC_LSFT, KC_CALC, RGB_HUD, RGB_SAD, RGB_VAD, KC_WBAK, KC_WFWD, BL_DEC, _______, _______, KC_PSCR, KC_VOLD, \
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_2U_space( \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
[_LOWER] = LAYOUT_2U_space( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
|
||||
@ -59,7 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
[_RAISE] = LAYOUT_2U_space( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
|
||||
|
||||
@ -1,70 +0,0 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
// #include "keycode.h"
|
||||
// #include "action.h"
|
||||
|
||||
#define KEYMAP_GRID( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_MIT( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K3X, KC_NO, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_OFFSET( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP KEYMAP_GRID
|
||||
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
|
||||
|
||||
#endif
|
||||
@ -1,9 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
@ -31,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | Del | Alt | GUI |Lower | Space|Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_ortho_4x12( \
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \
|
||||
@ -49,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | nkro | Alt | NKRO |Lower | PgDn | PgUp |Raise | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
[_LOWER] = LAYOUT_ortho_4x12( \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, \
|
||||
KC_LSFT, KC_PSCR, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, _______, _______, BL_ON, BL_STEP, KC_ENT, \
|
||||
@ -67,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Ctrl | | Alt | |Lower | | |Raise | 0 | | Home | End |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
[_RAISE] = LAYOUT_ortho_4x12( \
|
||||
KC_CAPS, KC_MINS, KC_PLUS, KC_EQL, KC_LPRN, KC_RPRN, _______, KC_7, KC_8, KC_9, KC_BSPC, KC_DEL, \
|
||||
KC_LOCK, KC_TILD, KC_UNDS, _______,KC_LBRC, KC_RBRC, _______, KC_4, KC_5, KC_6, _______, _______, \
|
||||
KC_INS, KC_GRV, KC_BSLS, KC_PIPE, KC_LCBR, KC_RCBR, _______, KC_1, KC_2, KC_3, KC_DOT, _______, \
|
||||
|
||||
@ -1,5 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
@ -36,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | Ctrl | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_2U_space( \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -54,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | RGB | RGB | RGB | | | Next | Vol- | Vol+ | Play | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
[_LOWER] = LAYOUT_2U_space( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \
|
||||
@ -72,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | Prev | Play | Next | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
[_RAISE] = LAYOUT_2U_space( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END, KC_PGUP, KC_PGDN, _______, \
|
||||
@ -90,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |Qwerty| 0 | . | . |Enter |Enter | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_NUMPAD] = KEYMAP( \
|
||||
[_NUMPAD] = LAYOUT_2U_space( \
|
||||
KC_ESC, KC_P7, KC_P8, KC_P9, KC_PAST, KC_PSLS, _______, _______, _______, _______, _______, _______, \
|
||||
KC_BSPC, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_PMNS, _______, _______, _______, _______, _______, _______, \
|
||||
_______, KC_P1, KC_P2, KC_P3, KC_PENT, KC_PENT, _______, _______, _______, _______, _______, _______, \
|
||||
|
||||
@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#ifdef KEYMAP
|
||||
#undef KEYMAP
|
||||
|
||||
@ -1,70 +0,0 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
// #include "keycode.h"
|
||||
// #include "action.h"
|
||||
|
||||
#define KEYMAP_GRID( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_MIT( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K3X, KC_NO, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_OFFSET( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP KEYMAP_GRID
|
||||
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
|
||||
|
||||
#endif
|
||||
@ -1,5 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum jj40_layers {
|
||||
_QWERTY,
|
||||
@ -27,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | Fn | Ctrl | Alt | GUI |Space |Lower |Raise |Space | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
|
||||
@ -45,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
[_LOWER] = LAYOUT_ortho_4x12( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_ENT, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, KC_PIPE, \
|
||||
@ -63,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
[_RAISE] = LAYOUT_ortho_4x12( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_ENT, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, KC_BSLS, \
|
||||
@ -86,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | |||Fn||| Mode | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FUNC] = KEYMAP( \
|
||||
[_FUNC] = LAYOUT_ortho_4x12( \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, BL_TOGG, BL_BRTG, BL_INC, _______, _______, _______, KC_VOLU, \
|
||||
_______, KC_CALC, RGB_HUD, RGB_SAD, RGB_VAD, KC_WBAK, KC_WFWD, BL_DEC, _______, _______, KC_PSCR, KC_VOLD, \
|
||||
|
||||
@ -1,70 +0,0 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
// #include "keycode.h"
|
||||
// #include "action.h"
|
||||
|
||||
#define KEYMAP_GRID( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_MIT( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K3X, KC_NO, K38, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_OFFSET( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
|
||||
K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
|
||||
K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \
|
||||
) \
|
||||
{ \
|
||||
{ K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
|
||||
{ K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
|
||||
{ K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \
|
||||
}
|
||||
|
||||
#define KEYMAP KEYMAP_GRID
|
||||
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
|
||||
|
||||
#endif
|
||||
@ -1,6 +1,4 @@
|
||||
#include "jj40.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
@ -28,42 +26,42 @@ enum jj40_keycodes {
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KEYMAP( \
|
||||
[_QWERTY] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
CTLESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, SHFTENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
|
||||
KC_PSCR, KC_BSPC, KC_LALT, _______, LEFTY, KC_LGUI, KC_SPC, RIGHTY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
[_DVORAK] = KEYMAP( \
|
||||
[_DVORAK] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
|
||||
CTLESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, SHFTENT, \
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_SLSH, \
|
||||
KC_PSCR, KC_LGUI, KC_LALT, KC_CAPS, LEFTY, KC_BSPC, KC_SPC, RIGHTY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
[_GAME] = KEYMAP( \
|
||||
[_GAME] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, _______, _______, _______, _______, QWERTY, \
|
||||
CTLESC, KC_A, KC_S, KC_D, KC_F, KC_G, _______, _______, _______, _______, _______, _______, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, _______, _______, _______, _______, \
|
||||
KC_LCTL, KC_1, KC_2, KC_3, LEFTY, KC_SPC, KC_BSPC, RIGHTY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \
|
||||
),
|
||||
|
||||
[_LEFTY] = KEYMAP( \
|
||||
[_LEFTY] = LAYOUT_ortho_4x12( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
KC_DEL, _______, _______, _______, _______, _______, _______, KC_LPRN, KC_RPRN, KC_LBRC, KC_RBRC, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, KC_INS, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
|
||||
),
|
||||
|
||||
[_RIGHTY] = KEYMAP( \
|
||||
[_RIGHTY] = LAYOUT_ortho_4x12( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, _______, KC_EQL, KC_MINS, KC_BSLS, KC_SLSH, _______, _______, \
|
||||
_______, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
|
||||
[_DUAL] = KEYMAP( \
|
||||
[_DUAL] = LAYOUT_ortho_4x12( \
|
||||
RESET, _______, _______, _______, _______, QWERTY, GAME, _______, _______, _______, BL_BRTG, RESET, \
|
||||
_______, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, AG_NORM, AG_SWAP, _______, _______, _______, BL_TOGG, _______, \
|
||||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, TG_NKRO, _______, _______, _______, _______, _______, \
|
||||
|
||||
@ -56,3 +56,5 @@ SRC = matrix.c i2c.c backlight.c
|
||||
|
||||
# programming options
|
||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||
|
||||
LAYOUTS = ortho_4x12 planck_mit planck_grid
|
||||
|
||||
@ -13,6 +13,8 @@ USB report options are supported.
|
||||
Hardware Supported: JJ50 with the ATmega32a chip.
|
||||
Hardware Availability: The JJ50 PCB is available from kprepublic on AliExpress and suchlike.
|
||||
|
||||
This version by Wayne K Jones (github.com/WarmCatUK)
|
||||
|
||||
|
||||
## Installing and Building
|
||||
|
||||
@ -70,8 +72,10 @@ And flash the compiled hex file with `HIDBootFlash`. Simply put the board in fla
|
||||
1. Try plugging the board in while pressing `Backspace` (`Key below the top right key`). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
|
||||
2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.
|
||||
3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` for more info.
|
||||
4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, simply force rebuild by making with:
|
||||
4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, remove the previous build and simply force rebuild by making with:
|
||||
```
|
||||
$ rm jj50_default.hex
|
||||
$ make -B jj50:default
|
||||
$ make -B jj50:default:program
|
||||
```
|
||||
|
||||
|
||||
212
keyboards/jj50/backlight.c
Normal file
212
keyboards/jj50/backlight.c
Normal file
@ -0,0 +1,212 @@
|
||||
/**
|
||||
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#include "backlight.h"
|
||||
#include "quantum.h"
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/interrupt.h>
|
||||
|
||||
#include "backlight_custom.h"
|
||||
#include "breathing_custom.h"
|
||||
|
||||
// DEBUG
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
|
||||
// Port D: digital pins of the AVR chipset
|
||||
#define NUMLOCK_PORT (1 << 1) // 1st pin of Port D (digital)
|
||||
#define CAPSLOCK_PORT (1 << 2) // 2nd pin
|
||||
#define BACKLIGHT_PORT (1 << 4) // 4th pin
|
||||
#define SCROLLLOCK_PORT (1 << 6) // 6th pin
|
||||
|
||||
#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
|
||||
#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
|
||||
|
||||
#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
|
||||
|
||||
#define PWM_MAX 0xFF
|
||||
#define TIMER_TOP 255 // 8 bit PWM
|
||||
|
||||
extern backlight_config_t backlight_config;
|
||||
|
||||
/**
|
||||
* References
|
||||
* Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
|
||||
* TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
|
||||
* Timers: http://www.avrbeginners.net/architecture/timers/timers.html
|
||||
* 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
|
||||
* PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
|
||||
*/
|
||||
|
||||
// @Override
|
||||
// turn LEDs on and off depending on USB caps/num/scroll lock states.
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
// turn on
|
||||
DDRD |= NUMLOCK_PORT;
|
||||
PORTD |= NUMLOCK_PORT;
|
||||
} else {
|
||||
// turn off
|
||||
DDRD &= ~NUMLOCK_PORT;
|
||||
PORTD &= ~NUMLOCK_PORT;
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRD |= CAPSLOCK_PORT;
|
||||
PORTD |= CAPSLOCK_PORT;
|
||||
} else {
|
||||
DDRD &= ~CAPSLOCK_PORT;
|
||||
PORTD &= ~CAPSLOCK_PORT;
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
DDRD |= SCROLLLOCK_PORT;
|
||||
PORTD |= SCROLLLOCK_PORT;
|
||||
} else {
|
||||
DDRD &= ~SCROLLLOCK_PORT;
|
||||
PORTD &= ~SCROLLLOCK_PORT;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
|
||||
// sets up Timer 1 for 8-bit PWM
|
||||
void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
|
||||
// default 8 bit mode
|
||||
TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
|
||||
TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
|
||||
|
||||
// clear output compare value A
|
||||
// outb(OCR1AH, 0);
|
||||
// outb(OCR1AL, 0);
|
||||
|
||||
// clear output comparator registers for B
|
||||
OCR1BH = 0; // outb(OCR1BH, 0);
|
||||
OCR1BL = 0; // outb(OCR1BL, 0);
|
||||
}
|
||||
|
||||
bool is_init = false;
|
||||
void timer1Init(void) {
|
||||
// timer1SetPrescaler(TIMER1PRESCALE)
|
||||
// set to DIV/64
|
||||
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
|
||||
|
||||
// reset TCNT1
|
||||
TCNT1H = 0; // outb(TCNT1H, 0);
|
||||
TCNT1L = 0; // outb(TCNT1L, 0);
|
||||
|
||||
// TOIE1: Timer Overflow Interrupt Enable (Timer 1);
|
||||
TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
|
||||
|
||||
is_init = true;
|
||||
}
|
||||
|
||||
void timer1UnInit(void) {
|
||||
// set prescaler back to NONE
|
||||
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
|
||||
|
||||
// disable timer overflow interrupt
|
||||
TIMSK &= ~_BV(TOIE1); // overflow bit?
|
||||
|
||||
setPWM(0);
|
||||
|
||||
is_init = false;
|
||||
}
|
||||
|
||||
|
||||
// handle TCNT1 overflow
|
||||
//! Interrupt handler for tcnt1 overflow interrupt
|
||||
ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
|
||||
{
|
||||
// sei();
|
||||
// handle breathing here
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
if (is_breathing()) {
|
||||
custom_breathing_handler();
|
||||
}
|
||||
#endif
|
||||
|
||||
// TODO call user defined function
|
||||
}
|
||||
|
||||
// enable timer 1 PWM
|
||||
// timer1PWMBOn()
|
||||
void timer1PWMBEnable(void) {
|
||||
// turn on channel B (OC1B) PWM output
|
||||
// set OC1B as non-inverted PWM
|
||||
TCCR1A |= _BV(COM1B1);
|
||||
TCCR1A &= ~_BV(COM1B0);
|
||||
}
|
||||
|
||||
// disable timer 1 PWM
|
||||
// timer1PWMBOff()
|
||||
void timer1PWMBDisable(void) {
|
||||
TCCR1A &= ~_BV(COM1B1);
|
||||
TCCR1A &= ~_BV(COM1B0);
|
||||
}
|
||||
|
||||
void enableBacklight(void) {
|
||||
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||
}
|
||||
|
||||
void disableBacklight(void) {
|
||||
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||
}
|
||||
|
||||
void startPWM(void) {
|
||||
timer1Init();
|
||||
timer1PWMBEnable();
|
||||
enableBacklight();
|
||||
}
|
||||
|
||||
void stopPWM(void) {
|
||||
timer1UnInit();
|
||||
disableBacklight();
|
||||
timer1PWMBDisable();
|
||||
}
|
||||
|
||||
void b_led_init_ports(void) {
|
||||
/* turn backlight on/off depending on user preference */
|
||||
#if BACKLIGHT_ON_STATE == 0
|
||||
// DDRx register: sets the direction of Port D
|
||||
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
|
||||
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
|
||||
#else
|
||||
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
|
||||
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
|
||||
#endif
|
||||
|
||||
timer1PWMSetup();
|
||||
startPWM();
|
||||
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
breathing_enable();
|
||||
#endif
|
||||
}
|
||||
|
||||
void b_led_set(uint8_t level) {
|
||||
if (level > BACKLIGHT_LEVELS) {
|
||||
level = BACKLIGHT_LEVELS;
|
||||
}
|
||||
|
||||
setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
|
||||
}
|
||||
|
||||
// called every matrix scan
|
||||
void b_led_task(void) {
|
||||
// do nothing for now
|
||||
}
|
||||
|
||||
void setPWM(uint16_t xValue) {
|
||||
if (xValue > TIMER_TOP) {
|
||||
xValue = TIMER_TOP;
|
||||
}
|
||||
OCR1B = xValue; // timer1PWMBSet(xValue);
|
||||
}
|
||||
|
||||
#endif // BACKLIGHT_ENABLE
|
||||
15
keyboards/jj50/backlight_custom.h
Normal file
15
keyboards/jj50/backlight_custom.h
Normal file
@ -0,0 +1,15 @@
|
||||
/**
|
||||
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#ifndef BACKLIGHT_CUSTOM_H
|
||||
#define BACKLIGHT_CUSTOM_H
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
void b_led_init_ports(void);
|
||||
void b_led_set(uint8_t level);
|
||||
void b_led_task(void);
|
||||
void setPWM(uint16_t xValue);
|
||||
|
||||
#endif // BACKLIGHT_CUSTOM_H
|
||||
140
keyboards/jj50/breathing_custom.h
Normal file
140
keyboards/jj50/breathing_custom.h
Normal file
@ -0,0 +1,140 @@
|
||||
/**
|
||||
* Breathing effect code for PS2AVRGB boards (ATMEGA32A)
|
||||
* Works in conjunction with `backlight.c`.
|
||||
*
|
||||
* Code adapted from `quantum.c` to register with the existing TIMER1 overflow
|
||||
* handler in `backlight.c` instead of setting up its own timer.
|
||||
* Kenneth A. (github.com/krusli | krusli.me)
|
||||
*/
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
|
||||
#include "backlight_custom.h"
|
||||
|
||||
#ifndef BREATHING_PERIOD
|
||||
#define BREATHING_PERIOD 6
|
||||
#endif
|
||||
|
||||
#define breathing_min() do {breathing_counter = 0;} while (0)
|
||||
#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
|
||||
|
||||
// TODO make this share code with quantum.c
|
||||
|
||||
#define BREATHING_NO_HALT 0
|
||||
#define BREATHING_HALT_OFF 1
|
||||
#define BREATHING_HALT_ON 2
|
||||
#define BREATHING_STEPS 128
|
||||
|
||||
static uint8_t breathing_period = BREATHING_PERIOD;
|
||||
static uint8_t breathing_halt = BREATHING_NO_HALT;
|
||||
static uint16_t breathing_counter = 0;
|
||||
|
||||
static bool breathing = false;
|
||||
|
||||
bool is_breathing(void) {
|
||||
return breathing;
|
||||
}
|
||||
|
||||
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
||||
static uint16_t cie_lightness(uint16_t v) {
|
||||
if (v <= 5243) // if below 8% of max
|
||||
return v / 9; // same as dividing by 900%
|
||||
else {
|
||||
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
|
||||
// to get a useful result with integer division, we shift left in the expression above
|
||||
// and revert what we've done again after squaring.
|
||||
y = y * y * y >> 8;
|
||||
if (y > 0xFFFFUL) // prevent overflow
|
||||
return 0xFFFFU;
|
||||
else
|
||||
return (uint16_t) y;
|
||||
}
|
||||
}
|
||||
|
||||
void breathing_enable(void) {
|
||||
breathing = true;
|
||||
breathing_counter = 0;
|
||||
breathing_halt = BREATHING_NO_HALT;
|
||||
// interrupt already registered
|
||||
}
|
||||
|
||||
void breathing_pulse(void) {
|
||||
if (get_backlight_level() == 0)
|
||||
breathing_min();
|
||||
else
|
||||
breathing_max();
|
||||
breathing_halt = BREATHING_HALT_ON;
|
||||
// breathing_interrupt_enable();
|
||||
breathing = true;
|
||||
}
|
||||
|
||||
void breathing_disable(void) {
|
||||
breathing = false;
|
||||
// backlight_set(get_backlight_level());
|
||||
b_led_set(get_backlight_level()); // custom implementation of backlight_set()
|
||||
}
|
||||
|
||||
void breathing_self_disable(void)
|
||||
{
|
||||
if (get_backlight_level() == 0)
|
||||
breathing_halt = BREATHING_HALT_OFF;
|
||||
else
|
||||
breathing_halt = BREATHING_HALT_ON;
|
||||
}
|
||||
|
||||
void breathing_toggle(void) {
|
||||
if (is_breathing())
|
||||
breathing_disable();
|
||||
else
|
||||
breathing_enable();
|
||||
}
|
||||
|
||||
void breathing_period_set(uint8_t value)
|
||||
{
|
||||
if (!value)
|
||||
value = 1;
|
||||
breathing_period = value;
|
||||
}
|
||||
|
||||
void breathing_period_default(void) {
|
||||
breathing_period_set(BREATHING_PERIOD);
|
||||
}
|
||||
|
||||
void breathing_period_inc(void)
|
||||
{
|
||||
breathing_period_set(breathing_period+1);
|
||||
}
|
||||
|
||||
void breathing_period_dec(void)
|
||||
{
|
||||
breathing_period_set(breathing_period-1);
|
||||
}
|
||||
|
||||
/* To generate breathing curve in python:
|
||||
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
|
||||
*/
|
||||
static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||
|
||||
// Use this before the cie_lightness function.
|
||||
static inline uint16_t scale_backlight(uint16_t v) {
|
||||
return v / BACKLIGHT_LEVELS * get_backlight_level();
|
||||
}
|
||||
|
||||
void custom_breathing_handler(void) {
|
||||
uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
|
||||
// resetting after one period to prevent ugly reset at overflow.
|
||||
breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
|
||||
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
|
||||
|
||||
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
|
||||
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
|
||||
{
|
||||
// breathing_interrupt_disable();
|
||||
}
|
||||
|
||||
setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
|
||||
}
|
||||
|
||||
#endif // BACKLIGHT_BREATHING
|
||||
#endif // BACKLIGHT_ENABLE
|
||||
@ -35,11 +35,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define MATRIX_COLS 15
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
#define BACKLIGHT_PIN D4
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
//#define BACKLIGHT_PIN D4
|
||||
#define BACKLIGHT_LEVELS 12
|
||||
|
||||
//#define RGB_DI_PIN C0
|
||||
#define RGBLED_NUM 5
|
||||
#define RGB_DI_PIN E2
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 12
|
||||
#define RGBLIGHT_SAT_STEP 15
|
||||
|
||||
@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "jj50.h"
|
||||
#include "rgblight.h"
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
@ -24,11 +23,38 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include "i2c.h"
|
||||
#include "quantum.h"
|
||||
|
||||
#include "backlight.h"
|
||||
#include "backlight_custom.h"
|
||||
|
||||
// for keyboard subdirectory level init functions
|
||||
// @Override
|
||||
void matrix_init_kb(void) {
|
||||
// call user level keymaps, if any
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
/// Overrides functions in `quantum.c`
|
||||
void backlight_init_ports(void) {
|
||||
b_led_init_ports();
|
||||
}
|
||||
|
||||
void backlight_task(void) {
|
||||
b_led_task();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level) {
|
||||
b_led_set(level);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
||||
// custom RGB driver
|
||||
void rgblight_set(void) {
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||
for (uint8_t i=0; i<RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
@ -39,7 +65,30 @@ void rgblight_set(void) {
|
||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
bool rgb_init = false;
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// if LEDs were previously on before poweroff, turn them back on
|
||||
if (rgb_init == false && rgblight_config.enable) {
|
||||
i2c_init();
|
||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
||||
rgb_init = true;
|
||||
}
|
||||
|
||||
rgblight_task();
|
||||
}
|
||||
#else
|
||||
void matrix_scan_kb(void) {
|
||||
#endif
|
||||
matrix_scan_user();
|
||||
/* Nothing else for now. */
|
||||
}
|
||||
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
@ -20,11 +20,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "quantum_keycodes.h"
|
||||
#include "keycode.h"
|
||||
#include "action.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
void matrix_init_user(void);
|
||||
|
||||
#define LAYOUT( \
|
||||
K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \
|
||||
K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \
|
||||
K211, K210, K209, K208, K204, K205, K206, K207, K203, K202, K101, K200, \
|
||||
|
||||
@ -17,7 +17,7 @@ You should have received a copy of the GNU General Public LicensezZZ
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "jj50.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "action_layer.h"
|
||||
#include "rgblight.h"
|
||||
|
||||
@ -25,6 +25,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define _DEFLT 0
|
||||
#define _RAISE 1
|
||||
#define _LOWER 2
|
||||
#define _FN 3
|
||||
|
||||
enum custom_keycodes {
|
||||
P_MACRO = SAFE_RANGE
|
||||
};
|
||||
|
||||
// GBP £ Macro (sends alt 156 - windows users only)
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
switch(keycode) {
|
||||
case P_MACRO:
|
||||
SEND_STRING(SS_DOWN(X_LALT));
|
||||
SEND_STRING(SS_TAP(X_KP_1));
|
||||
SEND_STRING(SS_TAP(X_KP_5));
|
||||
SEND_STRING(SS_TAP(X_KP_6));
|
||||
SEND_STRING(SS_UP(X_LALT));
|
||||
return false; break;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
@ -36,20 +57,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
|
||||
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | (Hold for shift / tap for enter)
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* | _FN | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_DEFLT] = KEYMAP( \
|
||||
[_DEFLT] = LAYOUT( \
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT),\
|
||||
BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC,KC_SPC, MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
MO(_FN), KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER),KC_SPC,KC_SPC,MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
|
||||
/* Raise
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
|
||||
@ -63,15 +83,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
|
||||
[_RAISE] = LAYOUT( \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
|
||||
RESET, BL_INC, RGB_SAI, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, BL_DEC, _______, _______, _______, _______, _______, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
|
||||
RESET, BL_INC, RGB_SAI, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, BL_DEC, _______, _______, _______, _______, _______, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
|
||||
RGB_TOG, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
),
|
||||
|
||||
|
||||
/* Lower
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
|
||||
@ -85,12 +105,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
|
||||
[_LOWER] = LAYOUT( \
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
_______, _______, _______, _______, _______, _______, _______,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
)
|
||||
BL_STEP, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
),
|
||||
|
||||
/* Fn
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | | | £ | | | | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | |BL_OFF|BL_DEC|BL_INC|BL_ON |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FN] = LAYOUT( \
|
||||
_______, _______, P_MACRO, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, BL_OFF, BL_DEC, BL_INC, BL_ON \
|
||||
)
|
||||
};
|
||||
|
||||
@ -1,5 +1,6 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2018 by Wayne K Jones <github.com/WarmCatUK>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
@ -36,17 +37,20 @@ void matrix_init(void) {
|
||||
// all inputs for columns
|
||||
DDRA = 0x00;
|
||||
DDRC &= ~(0x111111<<2);
|
||||
DDRD &= ~(1<<PIND7);
|
||||
//----> DDRD &= ~(1<<PIND7);
|
||||
// Port D not used on this keyboard
|
||||
// all columns are pulled-up
|
||||
PORTA = 0xFF;
|
||||
PORTC |= (0b111111<<2);
|
||||
//PORTD |= (1<<PIND7);
|
||||
// Port D not used on this keyboard
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix[row] = 0x00;
|
||||
matrix_debouncing[row] = 0x00;
|
||||
}
|
||||
matrix_init_quantum(); // missing from original port by Luiz
|
||||
}
|
||||
|
||||
void matrix_set_row_status(uint8_t row) {
|
||||
@ -72,9 +76,6 @@ uint8_t matrix_scan(void) {
|
||||
) | (
|
||||
// cols 8..13, PORTC 7 -> 0
|
||||
bit_reverse((~PINC) & 0xFF) << 8
|
||||
) | (
|
||||
// col 14, PORTD 7
|
||||
((~PIND) & (1 << PIND7)) << 7
|
||||
);
|
||||
|
||||
if (matrix_debouncing[row] != cols) {
|
||||
@ -92,8 +93,8 @@ uint8_t matrix_scan(void) {
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
matrix_scan_user();
|
||||
matrix_scan_quantum(); // also missing in original PS2AVRGB implementation
|
||||
//matrix_scan_user();
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
@ -36,16 +36,30 @@ BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = no
|
||||
COMMAND_ENABLE = no
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
NKRO_ENABLE = no
|
||||
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
|
||||
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
DISABLE_WS2812 = no
|
||||
|
||||
KEY_LOCK_ENABLE = yes
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
|
||||
#OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
# custom matrix setup
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC = matrix.c i2c.c
|
||||
SRC = matrix.c i2c.c backlight.c
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
# programming options
|
||||
PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
|
||||
|
||||
@ -241,8 +241,8 @@ section at the end of this file).
|
||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02
|
||||
/* Version number of the device: Minor number first, then major number.
|
||||
*/
|
||||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
|
||||
#define USB_CFG_VENDOR_NAME_LEN 13
|
||||
#define USB_CFG_VENDOR_NAME 'K', 'P', 'R', 'e', 'p', 'u', 'b', 'l', 'i', 'c'
|
||||
#define USB_CFG_VENDOR_NAME_LEN 10
|
||||
/* These two values define the vendor name returned by the USB device. The name
|
||||
* must be given as a list of characters under single quotes. The characters
|
||||
* are interpreted as Unicode (UTF-16) entities.
|
||||
@ -251,8 +251,8 @@ section at the end of this file).
|
||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||
* details.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
|
||||
#define USB_CFG_DEVICE_NAME_LEN 8
|
||||
#define USB_CFG_DEVICE_NAME 'J','J','5','0',' ','K','e','y','b','o','a','r','d'
|
||||
#define USB_CFG_DEVICE_NAME_LEN 13
|
||||
/* Same as above for the device name. If you don't want a device name, undefine
|
||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||
* you use a shared VID/PID.
|
||||
|
||||
@ -1,6 +1,4 @@
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "keymap_german.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
@ -1,11 +1,5 @@
|
||||
#include "lets_split.h"
|
||||
#include "bootloader.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "LUFA/Drivers/Peripheral/TWI.h"
|
||||
#ifdef AUDIO_ENABLE
|
||||
#include "audio.h"
|
||||
#endif
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
@ -1,6 +1,4 @@
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
@ -40,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |Adjust| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = LAYOUT(
|
||||
[_QWERTY] = LAYOUT_ortho_4x12(
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -58,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_COLEMAK] = LAYOUT( \
|
||||
[_COLEMAK] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
@ -76,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_DVORAK] = LAYOUT( \
|
||||
[_DVORAK] = LAYOUT_ortho_4x12( \
|
||||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
|
||||
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
|
||||
@ -94,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = LAYOUT( \
|
||||
[_LOWER] = LAYOUT_ortho_4x12( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
|
||||
@ -112,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = LAYOUT( \
|
||||
[_RAISE] = LAYOUT_ortho_4x12( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
|
||||
@ -130,7 +128,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = LAYOUT( \
|
||||
[_ADJUST] = LAYOUT_ortho_4x12( \
|
||||
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
|
||||
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
|
||||
@ -4,12 +4,7 @@
|
||||
// Also, I like me some numpad
|
||||
|
||||
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#ifdef AUDIO_ENABLE
|
||||
#include "audio.h"
|
||||
#endif
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
@ -14,9 +14,8 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
@ -1,8 +1,5 @@
|
||||
#include "lets_split.h"
|
||||
#include "action_layer.h"
|
||||
#include "action_util.h"
|
||||
#include "debug.h"
|
||||
#include "eeconfig.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user