Merge branch 'master' into nuphy-air75

2024-11-22 03:19:24 +00:00 · 2023-12-25 22:37:31 +08:00 · 2023-12-25 22:37:31 +08:00 · 3bcceb8362
commit 3bcceb8362
parent 3995b3669c 83b84187ea
61 changed files with 2317 additions and 14 deletions
--- a/docs/pr_checklist.md
+++ b/docs/pr_checklist.md
@ -39,12 +39,13 @@ If there are any inconsistencies with these recommendations, you're best off [cr

 ## Keymap PRs

-!> Note that personal keymap submissions will no longer be accepted. This section applies to manufacturer-supported keymaps.
+!> Note that personal keymap submissions will no longer be accepted. This section applies to manufacturer-supported keymaps. Please see this [issue](https://github.com/qmk/qmk_firmware/issues/22724) for more information.

- `#include QMK_KEYBOARD_H` preferred to including specific board files
- prefer layer `enum`s to `#define`s
- custom keycode `enum`s must have first entry `= SAFE_RANGE`
- terminating backslash (`\`) in lines of LAYOUT macro parameters is superfluous and should be removed
+- PRs for vendor specific keymaps will be permitted. The naming convention for these should be `default_${vendor}`, `via_${vendor}` i.e. `via_clueboard`.
+    - vendor specific keymaps do not necessarily need to be "vanilla" and can be more richly featured than `default` or `via` stock keymaps.
+- #include QMK_KEYBOARD_H preferred to including specific board files
+- prefer layer enums to #defines
+- custom keycode enums must have first entry = SAFE_RANGE
 - some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap

 ## Keyboard PRs
--- a/keyboards/crkbd/keymaps/mb_via/config.h
+++ b/keyboards/crkbd/keymaps/mb_via/config.h
@ -0,0 +1,26 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+Copyright 2021 Elliot Powell  <@e11i0t23>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- a/keyboards/crkbd/keymaps/mb_via/keymap.c
+++ b/keyboards/crkbd/keymaps/mb_via/keymap.c
@ -0,0 +1,71 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+Copyright 2021 Elliot Powell  <@e11i0t23>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,  KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                         KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,  KC_ESC,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, TL_LOWR,  KC_SPC,     KC_ENT, TL_UPPR, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+
+  ),
+
+  [1] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_LEFT, KC_DOWN,   KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [2] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,  KC_GRV,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [3] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+        QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  )
+};
--- a/keyboards/crkbd/keymaps/mb_via/readme.md
+++ b/keyboards/crkbd/keymaps/mb_via/readme.md
@ -0,0 +1,12 @@
+# Default Via keyboard for the Corne R2G by Mechboards UK
+
+![r2g](https://cdn.shopify.com/s/files/1/0582/0242/3501/products/HelidoxCorneR2GPCB_1800x1800.png)
+
+Corne R2G is an eddition of the classic CRKBD by footsan remade to feature a full smd assembly
+
+In this fold can be found the default via enabled keymap that can be in conjunction 
+
+Flash example for this Keymap:  
+```sh
+qmk flash -kb crkbd/r2g -km mb_via
+```
--- a/keyboards/crkbd/keymaps/mb_via/rules.mk
+++ b/keyboards/crkbd/keymaps/mb_via/rules.mk
@ -0,0 +1,3 @@
+MOUSEKEY_ENABLE     = no     # Mouse keys
+VIA_ENABLE          = yes         # Enable VIA
+
--- a/keyboards/darmoshark/k3/config.h
+++ b/keyboards/darmoshark/k3/config.h
@ -0,0 +1,12 @@
+// Copyright 2023 Proceee
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+/* SPI Config for spi flash*/
+#define SPI_DRIVER SPIDQ
+#define SPI_SCK_PIN B3
+#define SPI_MOSI_PIN B5
+#define SPI_MISO_PIN B4
+#define SPI_MOSI_PAL_MODE 5
+
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
--- a/keyboards/darmoshark/k3/halconf.h
+++ b/keyboards/darmoshark/k3/halconf.h
@ -0,0 +1,10 @@
+// Copyright 2023 Proceee
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+#define SPI_USE_WAIT TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
+#include_next <halconf.h>
--- a/keyboards/darmoshark/k3/info.json
+++ b/keyboards/darmoshark/k3/info.json
@ -0,0 +1,183 @@
+{
+    "manufacturer": "Darmoshark",
+    "keyboard_name": "K3 QMK",
+    "maintainer": "Proceee",
+    "url": "",
+    "processor": "WB32FQ95",
+    "bootloader": "wb32-dfu",
+    "usb": {
+        "device_version": "1.0.0",
+        "vid": "0xC001",
+        "pid": "0x3667",
+        "suspend_wakeup_delay": 1000
+    },
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgb_matrix": true
+    },
+    "eeprom": {
+        "driver": "wear_leveling",
+        "wear_leveling": {
+            "driver": "spi_flash",
+            "backing_size": 4096
+        }
+    },
+    "matrix_pins": {
+        "rows": ["B13", "A1", "A2", "A3", "A4", "B7"],
+        "cols": ["B1", "C7", "C13", "B9"]
+    },
+    "indicators": {
+        "num_lock": "C5",
+        "on_state": 1
+    },
+    "ws2812": {
+        "pin": "A8"
+    },
+    "rgb_matrix": {
+        "driver": "ws2812",
+        "default":{
+          "val": 80
+        },
+        "sleep": true,
+        "center_point": [24, 32],
+        "max_brightness": 140,
+        "animations": {
+            "solid_color": true,
+            "alphas_mods": true,
+            "gradient_up_down": true,
+            "gradient_left_right": true,
+            "breathing": true,
+            "band_sat": true,
+            "band_val": true,
+            "band_pinwheel_sat": true,
+            "band_pinwheel_val": true,
+            "band_spiral_sat": true,
+            "band_spiral_val": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "cycle_up_down": true,
+            "cycle_out_in": true,
+            "cycle_out_in_dual": true,
+            "rainbow_moving_chevron": true,
+            "cycle_pinwheel": true,
+            "cycle_spiral": true,
+            "dual_beacon": true,
+            "rainbow_beacon": true,
+            "rainbow_pinwheels": true,
+            "raindrops": true,
+            "jellybean_raindrops": true,
+            "hue_breathing": true,
+            "hue_pendulum": true,
+            "hue_wave": true,
+            "pixel_fractal": true,
+            "pixel_flow": true,
+            "pixel_rain": true,
+            "typing_heatmap": true,
+            "digital_rain": true,
+            "solid_reactive_simple": true,
+            "solid_reactive": true,
+            "solid_reactive_wide": true,
+            "solid_reactive_multiwide": true,
+            "solid_reactive_cross": true,
+            "solid_reactive_multicross": true,
+            "solid_reactive_nexus": true,
+            "solid_reactive_multinexus": true,
+            "splash": true,
+            "multisplash": true,
+            "solid_splash": true,
+            "solid_multisplash": true
+        },
+        "layout": [
+            { "flags": 4, "matrix":[0,2], "x": 32, "y": 0},
+            { "flags": 4, "matrix":[0,3], "x": 48, "y": 0},
+
+            { "flags": 4, "matrix":[1,3], "x": 48, "y": 13},
+            { "flags": 4, "matrix":[2,3], "x": 48, "y": 26},
+            { "flags": 4, "matrix":[4,3], "x": 48, "y": 51},
+
+            { "flags": 4, "matrix":[5,2], "x": 48, "y": 64},
+            { "flags": 4, "matrix":[4,2], "x": 32, "y": 51},
+            { "flags": 4, "matrix":[3,2], "x": 32, "y": 38},
+            { "flags": 4, "matrix":[2,2], "x": 32, "y": 26},
+            { "flags": 4, "matrix":[1,2], "x": 32, "y": 13},
+
+            { "flags": 4, "matrix":[1,1], "x":  16, "y": 13},
+            { "flags": 4, "matrix":[2,1], "x":  16, "y": 26},
+            { "flags": 4, "matrix":[3,1], "x":  16, "y": 38},
+            { "flags": 4, "matrix":[4,1], "x":  16, "y": 51},
+
+            { "flags": 4, "matrix":[5,1], "x":  0, "y": 64},
+            { "flags": 4, "matrix":[4,0], "x":  0, "y": 51},
+            { "flags": 4, "matrix":[3,0], "x":  0, "y": 38},
+            { "flags": 4, "matrix":[2,0], "x":  0, "y": 26},
+            { "flags": 4, "matrix":[1,0], "x":  0, "y": 13},
+            { "flags": 4, "matrix":[0,0], "x":  0, "y": 0},
+
+            { "flags": 4, "matrix":[0,1], "x":  16, "y": 0},
+
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64},
+            { "flags": 4, "x": 224, "y": 64}
+        ]
+    },
+    "community_layouts": ["numpad_6x4"],
+    "layouts": {
+        "LAYOUT_numpad_6x4": {
+            "layout": [
+                { "matrix":[0,0], "x": 0, "y": 0 },
+                { "matrix":[0,1], "x": 1, "y": 0 },
+                { "matrix":[0,2], "x": 2, "y": 0 },
+                { "matrix":[0,3], "x": 3, "y": 0 },
+
+                { "matrix":[1,0], "x": 0, "y": 1 },
+                { "matrix":[1,1], "x": 1, "y": 1 },
+                { "matrix":[1,2], "x": 2, "y": 1 },
+                { "matrix":[1,3], "x": 3, "y": 1 },
+
+                { "matrix":[2,0], "x": 0, "y": 2 },
+                { "matrix":[2,1], "x": 1, "y": 2 },
+                { "matrix":[2,2], "x": 2, "y": 2 },
+
+                { "matrix":[3,0], "x": 0, "y": 3 },
+                { "matrix":[3,1], "x": 1, "y": 3 },
+                { "matrix":[3,2], "x": 2, "y": 3 },
+                { "matrix":[2,3], "x": 3, "y": 2, "h": 2 },
+
+                { "matrix":[4,0], "x": 0, "y": 4 },
+                { "matrix":[4,1], "x": 1, "y": 4 },
+                { "matrix":[4,2], "x": 2, "y": 4 },
+
+                { "matrix":[5,1],  "x": 0, "y": 5, "w": 2 },
+                { "matrix":[5,2],  "x": 2, "y": 5 },
+                { "matrix":[4,3], "x": 3, "y": 4, "h": 2 }
+            ]
+        }
+    }
+}
--- a/keyboards/darmoshark/k3/keymaps/default/keymap.c
+++ b/keyboards/darmoshark/k3/keymaps/default/keymap.c
@ -0,0 +1,25 @@
+// Copyright 2023 Proceee
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_numpad_6x4(
+        KC_ESC,   KC_TAB,   KC_BSPC,  MO(1),
+        KC_NUM,   KC_PSLS,  KC_PAST,  KC_PMNS,
+        KC_P7,    KC_P8,    KC_P9,
+        KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
+        KC_P1,    KC_P2,    KC_P3,
+        KC_P0,              KC_PDOT,  KC_PENT
+    ),
+
+    [1] = LAYOUT_numpad_6x4(
+        EE_CLR,   _______,  RGB_MOD,  _______,
+        KC_CALC,  _______,  _______,  RGB_VAD,
+        _______,  RGB_SPI,  _______,
+        _______,  _______,  _______,  RGB_VAI,
+        _______,  RGB_SPD,  _______,
+        _______,            RGB_TOG,  _______
+    )
+};
--- a/keyboards/darmoshark/k3/keymaps/via/config.h
+++ b/keyboards/darmoshark/k3/keymaps/via/config.h
@ -0,0 +1,6 @@
+// Copyright 2023 JoyLee (@itarze)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 6
--- a/keyboards/darmoshark/k3/keymaps/via/keymap.c
+++ b/keyboards/darmoshark/k3/keymaps/via/keymap.c
@ -0,0 +1,25 @@
+// Copyright 2023 Proceee
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_numpad_6x4(
+        KC_ESC,   KC_TAB,   KC_BSPC,  MO(1),
+        KC_NUM,   KC_PSLS,  KC_PAST,  KC_PMNS,
+        KC_P7,    KC_P8,    KC_P9,
+        KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
+        KC_P1,    KC_P2,    KC_P3,
+        KC_P0,              KC_PDOT,  KC_PENT
+    ),
+
+    [1] = LAYOUT_numpad_6x4(
+        EE_CLR,   _______,  RGB_MOD,  _______,
+        KC_CALC,  _______,  _______,  RGB_VAD,
+        _______,  RGB_SPI,  _______,
+        _______,  _______,  _______,  RGB_VAI,
+        _______,  RGB_SPD,  _______,
+        _______,            RGB_TOG,  _______
+    )
+};
--- a/keyboards/darmoshark/k3/keymaps/via/rules.mk
+++ b/keyboards/darmoshark/k3/keymaps/via/rules.mk
@ -0,0 +1 @@
+VIA_ENABLE = yes
--- a/keyboards/darmoshark/k3/mcuconf.h
+++ b/keyboards/darmoshark/k3/mcuconf.h
@ -0,0 +1,9 @@
+// Copyright 2023 Proceee
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef WB32_SPI_USE_QSPI
+#define WB32_SPI_USE_QSPI TRUE
--- a/keyboards/darmoshark/k3/readme.md
+++ b/keyboards/darmoshark/k3/readme.md
@ -0,0 +1,23 @@
+# K3 QMK
+
+* Keyboard Maintainer: [Proceee](https://github.com/Proceee)
+* Hardware Supported: [Darmoshark](http://www.Darmoshark.cn)
+* Hardware Availability: [Darmoshark](http://www.Darmoshark.cn)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make darmoshark/k3:default
+
+Flashing example for this keyboard:
+
+    make darmoshark/k3:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
--- a/keyboards/darmoshark/k3/rules.mk
+++ b/keyboards/darmoshark/k3/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/handwired/rd_61_qmk/config.h
+++ b/keyboards/handwired/rd_61_qmk/config.h
@ -0,0 +1,6 @@
+// Copyright 2023 abhiakl (@abhijithabhiakl)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+/* QK_MAKE support*/
+#define ENABLE_COMPILE_KEYCODE
--- a/keyboards/handwired/rd_61_qmk/info.json
+++ b/keyboards/handwired/rd_61_qmk/info.json
@ -0,0 +1,126 @@
+{
+    "manufacturer": "abhiakl",
+    "keyboard_name": "rd_61_qmk",
+    "maintainer": "abhijithabhiakl",
+    "backlight": {
+        "driver": "pwm",
+        "levels": 5,
+        "pin": "B7"
+    },
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x7421",
+        "vid": "0xFEED"
+    },
+    "development_board": "promicro",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "backlight": true,
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
+    "indicators": {
+        "caps_lock": "F0"
+    },
+    "matrix_pins": {
+        "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "D4", "D0", "D1", "D2", "D3", "D5"],
+        "rows": ["B5", "B4", "E6", "D7", "C6"]
+    },
+    "rgblight": {
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        },
+        "brightness_steps": 8,
+        "led_count": 1,
+        "saturation_steps": 8
+    },
+    "url": "",
+    "ws2812": {
+        "pin": "C7"
+    },
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 1], "x": 2.25, "y": 3},
+                {"matrix": [3, 2], "x": 3.25, "y": 3},
+                {"matrix": [3, 3], "x": 4.25, "y": 3},
+                {"matrix": [3, 4], "x": 5.25, "y": 3},
+                {"matrix": [3, 5], "x": 6.25, "y": 3},
+                {"matrix": [3, 6], "x": 7.25, "y": 3},
+                {"matrix": [3, 7], "x": 8.25, "y": 3},
+                {"matrix": [3, 8], "x": 9.25, "y": 3},
+                {"matrix": [3, 9], "x": 10.25, "y": 3},
+                {"matrix": [3, 10], "x": 11.25, "y": 3},
+                {"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
+                {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
+                {"matrix": [4, 8], "x": 10, "y": 4, "w": 1.25},
+                {"matrix": [4, 9], "x": 11.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 12], "x": 12.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}
--- a/keyboards/handwired/rd_61_qmk/keymaps/default/keymap.c
+++ b/keyboards/handwired/rd_61_qmk/keymaps/default/keymap.c
@ -0,0 +1,37 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        [0] = LAYOUT_60_ansi(
+            KC_ESC,   KC_1,    KC_2,         KC_3,      KC_4,     KC_5,     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+            KC_TAB,   KC_Q,    KC_W,         KC_E,      KC_R,     KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+            KC_CAPS,  KC_A,    KC_S,         KC_D,      KC_F,     KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+            KC_LSFT,           KC_Z,         KC_X,      KC_C,     KC_V,     KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+            KC_LCTL,  MO(1),   KC_LALT,                                    KC_SPC,                              KC_RALT, MO(3),   KC_RCTL, KC_PENT
+            ),
+
+        [1] = LAYOUT_60_ansi(
+            KC_GRV,   KC_F1,   KC_F2,        KC_F3,     KC_F4,    KC_F5,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,
+            KC_PSCR,  DF(0),   KC_UP,        KC_MUTE,   KC_VOLD,  KC_VOLU,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+            KC_DEL,   KC_LEFT, KC_DOWN,      KC_RGHT,   KC_BRID,  KC_BRIU,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+            KC_LSFT,           C(S(KC_TAB)), C(KC_TAB), KC_MPLY,  KC_MPRV,  KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_RSFT,
+            KC_RGUI,  KC_TRNS, MO(2),                                       KC_TRNS,                            KC_TRNS, MO(3),   KC_TRNS, KC_TRNS
+            ),
+
+        [2] = LAYOUT_60_ansi(
+            QK_RBT,   KC_TRNS, KC_TRNS,      KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,  KC_BSPC,
+            KC_PSCR,  KC_P7,   KC_P8,        KC_P9,     KC_PSLS,  KC_PAST,  KC_LEFT, KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_TRNS, KC_PSCR,
+            KC_DEL,   KC_P4,   KC_P5,        KC_P6,     KC_PMNS,  KC_PPLS,  KC_RGHT, KC_TRNS, KC_TRNS, KC_4,    KC_5,    KC_6,             KC_TRNS,
+            KC_LSFT,           KC_P1,        KC_P2,     KC_P3,    KC_PDOT,  KC_P0,   KC_ENT,  KC_TRNS, KC_1,    KC_2,    KC_3,             KC_RSFT,
+            KC_TRNS,  KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, MO(3),   KC_TRNS, KC_TRNS
+            ),
+
+        [3] = LAYOUT_60_ansi(
+            KC_TRNS,  KC_TRNS, KC_TRNS,      KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DB_TOGG, QK_RBT,  QK_BOOT, QK_MAKE,
+            KC_TRNS,  KC_TRNS, KC_TRNS,      KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+            KC_TRNS,  KC_TRNS, KC_TRNS,      KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+            KC_TRNS,           KC_TRNS,      KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI,          KC_TRNS,
+            KC_TRNS,  KC_TRNS, KC_TRNS,                                     KC_TRNS,                            RGB_MOD, KC_TRNS, RGB_HUI, RGB_SAI
+  )
+};
--- a/keyboards/handwired/rd_61_qmk/readme.md
+++ b/keyboards/handwired/rd_61_qmk/readme.md
@ -0,0 +1,53 @@
+# Redragon K617 (QMK ported)
+
+![Keyboard image](https://imagizer.imageshack.com/img922/3464/qUpU8k.png)
+
+*Firmware,layout and schematics for porting Redragon K617 keyboard to qmk*
+
+* Keyboard Maintainer: *[abhijithabhiakl](https://github.com/abhijithabhiakl)*
+* Hardware Supported: *Redragon K617, Pro micro(caterina)*
+* Hardware Availability: *[Redragon K617](https://redragon.in/products/fizz-k617-60-wired-mechanical-keyboard-white-and-grey-red-switches)*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/rd_61_qmk:default
+
+Flashing example for this keyboard:
+
+    make handwired/rd_61_qmk:default:flash
+    
+Also can be flashed with QMK *[QMK toolbox](https://github.com/qmk/qmk_toolbox)* or *[avrdudess](https://blog.zakkemble.net/avrdudess-a-gui-for-avrdude/)*
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+See [QMK repo cloning](https://docs.qmk.fm/#/getting_started_github) for information about cloning the repo
+
+## Hardware details: 
+
+Note : Before doing any modifications in the PCB make sure that the stock microcontroller is removed.
+
+#### Matrix layout:
+![Keyboard image](https://imagizer.imageshack.com/img924/8415/hX5gAb.jpg)
+
+#### Schematic:
+![Keyboard image](https://imagizer.imageshack.com/img922/5585/vXorPx.png)
+
+* *The header `J0` in not present in the normal pro mirco, for my purpose i directly soldered the `D5`, `C7` and `F0` pins to the pad of the microcontroller with micro soldering tools.
+
+* **To connect the promicro to PCB - Micro USB to the USB C, i made use of an old micro usb cable lying around, cut the cable to approprite length and exposed the wires, connected the male connector to female port of  pro micro, Connected the Vcc and Gnd wires to Vcc and Gnd in the PCB, In PCB there's a differential pair (D+, D-) running from USB C port in the PCB to microcontroller in the PCB, in between the connection there's a resistor and filter capacitors, after removing both (bypassing the connection) i connected the D+ and D- wires to the bypassed point respectively (make sure the cable wires are also impedance matched)
+
+#### RGB Lighting:
+
+The stock RGB Lighting used on the keyboard is [this](https://www.luckylight.cn/en/products/smd-led/multi-color-smd-led/?series_code=sr187-rgb-series) `SR187RGBC` `Multi-color PLCC SMD LEDs`, to use this kind of LED with qmk I either have to write a custom led matrix code ( I don't know for sure if qmk already have any support this neither currently have the knowledge or time to do so ) or need to make a led matrix with qmk supported led matrix drivers, due to above mentioned reasons I haven't did any RGB lightings in the keyboard except a single ws2812 led 
+
+I'm  trying to make a custom PCB for this keyboard (will work for all redragon 60% keyboard (ig) ),  I'll update here 
+
+## Bootloader
+
+Entering the bootloader:
+
+* **Physical reset button**: Briefly press the button soldered to promicro (In my case i soldered the reset button to the promicro with wires and glued in outside in front of the case)
+* **Bootmagic key at [0,0]**: Hold this key down when plugging the keyboard in. Just the single key
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`. Also in `layer #3` keys `DB_TOGG` `QK_RBT` `QK_BOOT` `QK_MAKE` are present at the top right corner for debug mode, keyboard reboot, bootloader mode and qmk make (`qmk flash` if shift is held ) in the respective order to make the flasing easier.
+`QK_MAKE` will type `qmk compile -kb handwired/rd_61_qmk -km default` in the terminal and `qmk flash` will type `qmk flash -kb handwired/rd_61_qmk -km default`
+
--- a/keyboards/handwired/rd_61_qmk/rules.mk
+++ b/keyboards/handwired/rd_61_qmk/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/handwired/scottokeebs/scotto108/info.json
+++ b/keyboards/handwired/scottokeebs/scotto108/info.json
@ -0,0 +1,138 @@
+{
+    "manufacturer": "ScottoKeebs",
+    "keyboard_name": "Scotto108",
+    "maintainer": "joe-scotto",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+    },
+    "matrix_pins": {
+        "cols": ["GP6", "GP7", "GP8", "GP9", "GP10", "GP11", "GP12", "GP13", "GP14", "GP15", "GP29", "GP28", "GP27", "GP26", "GP22", "GP21", "GP20", "GP19", "GP18", "GP17", "GP16"],
+        "rows": ["GP0", "GP1", "GP2", "GP3", "GP4", "GP5"]
+    },
+    "processor": "RP2040",
+    "url": "https://scottokeebs.com",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x1022",
+        "vid": "0x534B"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0},
+                {"matrix": [0, 14], "x": 14.5, "y": 0},
+                {"matrix": [0, 15], "x": 15.5, "y": 0},
+                {"matrix": [0, 16], "x": 16.5, "y": 0},
+                {"matrix": [0, 17], "x": 18, "y": 0},
+                {"matrix": [0, 18], "x": 19, "y": 0},
+                {"matrix": [0, 19], "x": 20, "y": 0},
+                {"matrix": [0, 20], "x": 21, "y": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1.5},
+                {"matrix": [1, 1], "x": 1, "y": 1.5},
+                {"matrix": [1, 2], "x": 2, "y": 1.5},
+                {"matrix": [1, 3], "x": 3, "y": 1.5},
+                {"matrix": [1, 4], "x": 4, "y": 1.5},
+                {"matrix": [1, 5], "x": 5, "y": 1.5},
+                {"matrix": [1, 6], "x": 6, "y": 1.5},
+                {"matrix": [1, 7], "x": 7, "y": 1.5},
+                {"matrix": [1, 8], "x": 8, "y": 1.5},
+                {"matrix": [1, 9], "x": 9, "y": 1.5},
+                {"matrix": [1, 10], "x": 10, "y": 1.5},
+                {"matrix": [1, 11], "x": 11, "y": 1.5},
+                {"matrix": [1, 12], "x": 12, "y": 1.5},
+                {"matrix": [1, 13], "x": 13, "y": 1.5},
+                {"matrix": [1, 14], "x": 14.5, "y": 1.5},
+                {"matrix": [1, 15], "x": 15.5, "y": 1.5},
+                {"matrix": [1, 16], "x": 16.5, "y": 1.5},
+                {"matrix": [1, 17], "x": 18, "y": 1.5},
+                {"matrix": [1, 18], "x": 19, "y": 1.5},
+                {"matrix": [1, 19], "x": 20, "y": 1.5},
+                {"matrix": [1, 20], "x": 21, "y": 1.5},
+                {"matrix": [2, 0], "x": 0, "y": 2.5},
+                {"matrix": [2, 1], "x": 1, "y": 2.5},
+                {"matrix": [2, 2], "x": 2, "y": 2.5},
+                {"matrix": [2, 3], "x": 3, "y": 2.5},
+                {"matrix": [2, 4], "x": 4, "y": 2.5},
+                {"matrix": [2, 5], "x": 5, "y": 2.5},
+                {"matrix": [2, 6], "x": 6, "y": 2.5},
+                {"matrix": [2, 7], "x": 7, "y": 2.5},
+                {"matrix": [2, 8], "x": 8, "y": 2.5},
+                {"matrix": [2, 9], "x": 9, "y": 2.5},
+                {"matrix": [2, 10], "x": 10, "y": 2.5},
+                {"matrix": [2, 11], "x": 11, "y": 2.5},
+                {"matrix": [2, 12], "x": 12, "y": 2.5},
+                {"matrix": [2, 13], "x": 13, "y": 2.5},
+                {"matrix": [2, 14], "x": 14.5, "y": 2.5},
+                {"matrix": [2, 15], "x": 15.5, "y": 2.5},
+                {"matrix": [2, 16], "x": 16.5, "y": 2.5},
+                {"matrix": [2, 17], "x": 18, "y": 2.5},
+                {"matrix": [2, 18], "x": 19, "y": 2.5},
+                {"matrix": [2, 19], "x": 20, "y": 2.5},
+                {"matrix": [3, 0], "x": 0, "y": 3.5},
+                {"matrix": [3, 1], "x": 1, "y": 3.5},
+                {"matrix": [3, 2], "x": 2, "y": 3.5},
+                {"matrix": [3, 3], "x": 3, "y": 3.5},
+                {"matrix": [3, 4], "x": 4, "y": 3.5},
+                {"matrix": [3, 5], "x": 5, "y": 3.5},
+                {"matrix": [3, 6], "x": 6, "y": 3.5},
+                {"matrix": [3, 7], "x": 7, "y": 3.5},
+                {"matrix": [3, 8], "x": 8, "y": 3.5},
+                {"matrix": [3, 9], "x": 9, "y": 3.5},
+                {"matrix": [3, 10], "x": 10, "y": 3.5},
+                {"matrix": [3, 11], "x": 11, "y": 3.5},
+                {"matrix": [3, 13], "x": 12, "y": 3.5, "w": 2},
+                {"matrix": [3, 17], "x": 18, "y": 3.5},
+                {"matrix": [3, 18], "x": 19, "y": 3.5},
+                {"matrix": [3, 19], "x": 20, "y": 3.5},
+                {"matrix": [3, 20], "x": 21, "y": 2.5, "h": 2},
+                {"matrix": [4, 0], "x": 0, "y": 4.5},
+                {"matrix": [4, 1], "x": 1, "y": 4.5},
+                {"matrix": [4, 2], "x": 2, "y": 4.5},
+                {"matrix": [4, 3], "x": 3, "y": 4.5},
+                {"matrix": [4, 4], "x": 4, "y": 4.5},
+                {"matrix": [4, 5], "x": 5, "y": 4.5},
+                {"matrix": [4, 6], "x": 6, "y": 4.5},
+                {"matrix": [4, 7], "x": 7, "y": 4.5},
+                {"matrix": [4, 8], "x": 8, "y": 4.5},
+                {"matrix": [4, 9], "x": 9, "y": 4.5},
+                {"matrix": [4, 10], "x": 10, "y": 4.5},
+                {"matrix": [4, 12], "x": 11, "y": 4.5, "w": 3},
+                {"matrix": [4, 15], "x": 15.5, "y": 4.5},
+                {"matrix": [4, 17], "x": 18, "y": 4.5},
+                {"matrix": [4, 18], "x": 19, "y": 4.5},
+                {"matrix": [4, 19], "x": 20, "y": 4.5},
+                {"matrix": [5, 0], "x": 0, "y": 5.5},
+                {"matrix": [5, 1], "x": 1, "y": 5.5},
+                {"matrix": [5, 2], "x": 2, "y": 5.5},
+                {"matrix": [5, 6], "x": 3, "y": 5.5, "w": 7},
+                {"matrix": [5, 10], "x": 10, "y": 5.5},
+                {"matrix": [5, 11], "x": 11, "y": 5.5},
+                {"matrix": [5, 12], "x": 12, "y": 5.5},
+                {"matrix": [5, 13], "x": 13, "y": 5.5},
+                {"matrix": [5, 14], "x": 14.5, "y": 5.5},
+                {"matrix": [5, 15], "x": 15.5, "y": 5.5},
+                {"matrix": [5, 16], "x": 16.5, "y": 5.5},
+                {"matrix": [5, 17], "x": 18, "y": 5.5, "w": 2},
+                {"matrix": [5, 19], "x": 20, "y": 5.5},
+                {"matrix": [5, 20], "x": 21, "y": 4.5, "h": 2}
+            ]
+        }
+    }
+}
--- a/keyboards/handwired/scottokeebs/scotto108/keymaps/default/keymap.c
+++ b/keyboards/handwired/scottokeebs/scotto108/keymaps/default/keymap.c
@ -0,0 +1,29 @@
+/*
+Copyright 2023 Joe Scotto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,           KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5,  KC_F6, KC_F7,     KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,      KC_PSCR, KC_SCRL, KC_PAUS,      KC_1,   KC_2,    KC_3,    KC_4,
+        KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,   KC_7,  KC_8,      KC_9,   KC_0,    KC_MINS, KC_EQUAL, KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,      KC_NUM, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,   KC_U,  KC_I,      KC_O,   KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,      KC_P7,  KC_P8,   KC_P9,
+        KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,   KC_J,  KC_K,      KC_L,   KC_SCLN, KC_QUOT,           KC_ENT,                                      KC_P4,  KC_P5,   KC_P6,   KC_PPLS,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMMA,  KC_DOT, KC_SLSH,                    KC_RSFT,              KC_UP,                 KC_P1,  KC_P2,   KC_P3,
+        KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                           KC_RALT, KC_RGUI, KC_APP,   KC_RCTL,     KC_LEFT, KC_DOWN, KC_RIGHT,     KC_P0,           KC_PDOT, KC_PENT
+    )
+};
--- a/keyboards/handwired/scottokeebs/scotto108/readme.md
+++ b/keyboards/handwired/scottokeebs/scotto108/readme.md
@ -0,0 +1,29 @@
+# Scotto108
+
+![Scotto108](https://i.imgur.com/ss4BEujh.jpg)
+
+A 108-key full-sized ortholinear keyboard with a 7u spacebar and 4 macro keys above the numpad.
+
+*   Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
+*   Hardware Supported: Raspberry Pi Pico
+*   Hardware Availability: [ScottoKeebs](https://scottokeebs.com), [Amazon](https://amazon.com), [AliExpress](https://aliexpress.com)
+
+# Compiling
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/scottokeebs/scotto108:default
+
+Flashing example for this keyboard:
+
+    make handwired/scottokeebs/scotto108:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+# Bootloader
+
+Enter the bootloader in 3 ways:
+
+*   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+*   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+*   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
--- a/keyboards/handwired/scottokeebs/scotto108/rules.mk
+++ b/keyboards/handwired/scottokeebs/scotto108/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/handwired/scottokeebs/scotto61/info.json
+++ b/keyboards/handwired/scottokeebs/scotto61/info.json
@ -41,7 +41,7 @@
                {"matrix": [0, 11], "x": 11, "y": 0},
                {"matrix": [0, 12], "x": 12, "y": 0},
                {"matrix": [0, 13], "x": 13, "y": 0},
-                {"matrix": [1, 0], "x": 0, "y": 4},
+                {"matrix": [1, 0], "x": 0, "y": 1},
                {"matrix": [1, 1], "x": 1, "y": 1},
                {"matrix": [1, 2], "x": 2, "y": 1},
                {"matrix": [1, 3], "x": 3, "y": 1},
@ -67,7 +67,7 @@
                {"matrix": [2, 9], "x": 9, "y": 2},
                {"matrix": [2, 10], "x": 10, "y": 2},
                {"matrix": [2, 11], "x": 11, "y": 2},
-                {"matrix": [2, 13], "x": 13, "y": 2},
+                {"matrix": [2, 13], "x": 12, "y": 2, "w": 2},
                {"matrix": [3, 0], "x": 0, "y": 3},
                {"matrix": [3, 1], "x": 1, "y": 3},
                {"matrix": [3, 2], "x": 2, "y": 3},
@ -79,11 +79,11 @@
                {"matrix": [3, 8], "x": 8, "y": 3},
                {"matrix": [3, 9], "x": 9, "y": 3},
                {"matrix": [3, 10], "x": 10, "y": 3},
-                {"matrix": [3, 12], "x": 12, "y": 3},
+                {"matrix": [3, 12], "x": 11, "y": 3, "w": 3},
                {"matrix": [4, 0], "x": 0, "y": 4},
                {"matrix": [4, 1], "x": 1, "y": 4},
                {"matrix": [4, 2], "x": 2, "y": 4},
-                {"matrix": [4, 6], "x": 6, "y": 4},
+                {"matrix": [4, 6], "x": 3, "y": 4, "w": 7},
                {"matrix": [4, 10], "x": 10, "y": 4},
                {"matrix": [4, 11], "x": 11, "y": 4},
                {"matrix": [4, 12], "x": 12, "y": 4},
--- a/keyboards/kwstudio/scorpio/config.h
+++ b/keyboards/kwstudio/scorpio/config.h
@ -0,0 +1,20 @@
+/* Copyright 2023 kwstudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define WS2812_PIO_USE_PIO1
+
--- a/keyboards/kwstudio/scorpio/info.json
+++ b/keyboards/kwstudio/scorpio/info.json
@ -0,0 +1,199 @@
+{
+    "manufacturer": "kwstudio",
+    "keyboard_name": "Scorpio",
+    "maintainer": "kwstudio",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true
+    },
+    "indicators": {
+        "caps_lock": "GP24"
+    },
+    "matrix_pins": {
+        "cols": ["GP23", "GP22", "GP21", "GP20", "GP19", "GP18", "GP17", "GP7", "GP6", "GP5", "GP13", "GP12", "GP11", "GP10", "GP9", "GP8"],
+        "rows": ["GP1", "GP0", "GP16", "GP15", "GP14"]
+    },
+    "processor": "RP2040",
+    "rgblight": {
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        },
+        "led_count": 9,
+        "sleep": true
+    },
+    "url": "",
+    "usb": {
+        "device_version": "0.0.1",
+        "pid": "0x0002",
+        "vid": "0x4B53"
+    },
+    "ws2812": {
+        "driver": "vendor",
+        "pin": "GP4"
+    },
+    "layout_aliases": {
+        "LAYOUT_all": "LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs"
+    },
+    "layouts": {
+        "LAYOUT_65_ansi_blocker_tsangan_wkl": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
+
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
+                {"matrix": [1, 15], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
+                {"matrix": [2, 15], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 1], "x": 2.25, "y": 3},
+                {"matrix": [3, 2], "x": 3.25, "y": 3},
+                {"matrix": [3, 3], "x": 4.25, "y": 3},
+                {"matrix": [3, 4], "x": 5.25, "y": 3},
+                {"matrix": [3, 5], "x": 6.25, "y": 3},
+                {"matrix": [3, 6], "x": 7.25, "y": 3},
+                {"matrix": [3, 7], "x": 8.25, "y": 3},
+                {"matrix": [3, 8], "x": 9.25, "y": 3},
+                {"matrix": [3, 9], "x": 10.25, "y": 3},
+                {"matrix": [3, 10], "x": 11.25, "y": 3},
+                {"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
+                {"matrix": [3, 14], "x": 14, "y": 3},
+                {"matrix": [3, 15], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
+                {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.5},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 7},
+                {"matrix": [4, 10], "x": 10.75, "y": 4, "w": 1.5},
+                {"matrix": [4, 13], "x": 13, "y": 4},
+                {"matrix": [4, 14], "x": 14, "y": 4},
+                {"matrix": [4, 15], "x": 15, "y": 4}
+            ]
+        },
+        "LAYOUT_65_ansi_blocker_tsangan_wkl_split_bs": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0},
+                {"matrix": [0, 14], "x": 14, "y": 0},
+
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
+                {"matrix": [1, 15], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
+                {"matrix": [2, 15], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 1], "x": 2.25, "y": 3},
+                {"matrix": [3, 2], "x": 3.25, "y": 3},
+                {"matrix": [3, 3], "x": 4.25, "y": 3},
+                {"matrix": [3, 4], "x": 5.25, "y": 3},
+                {"matrix": [3, 5], "x": 6.25, "y": 3},
+                {"matrix": [3, 6], "x": 7.25, "y": 3},
+                {"matrix": [3, 7], "x": 8.25, "y": 3},
+                {"matrix": [3, 8], "x": 9.25, "y": 3},
+                {"matrix": [3, 9], "x": 10.25, "y": 3},
+                {"matrix": [3, 10], "x": 11.25, "y": 3},
+                {"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
+                {"matrix": [3, 14], "x": 14, "y": 3},
+                {"matrix": [3, 15], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
+                {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.5},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 7},
+                {"matrix": [4, 10], "x": 10.75, "y": 4, "w": 1.5},
+                {"matrix": [4, 13], "x": 13, "y": 4},
+                {"matrix": [4, 14], "x": 14, "y": 4},
+                {"matrix": [4, 15], "x": 15, "y": 4}
+            ]
+        }
+    }
+}
+
--- a/keyboards/kwstudio/scorpio/keymaps/default/keymap.c
+++ b/keyboards/kwstudio/scorpio/keymaps/default/keymap.c
@ -0,0 +1,34 @@
+/* Copyright 2023 kwstudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(
+    KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,    KC_8,      KC_9,    KC_0,      KC_MINS,   KC_EQL,   KC_BSPC,   KC_SPC, 
+    KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,      KC_O,    KC_P,      KC_LBRC,   KC_RBRC,  KC_BSLS,             KC_PGUP, 
+    KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,    KC_K,      KC_L,    KC_SCLN,   KC_QUOT,   KC_ENT,                        KC_PGDN, 
+    KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,    KC_COMM,   KC_DOT,  KC_SLSH,   KC_RSFT,                        KC_UP,    MO(1), 
+    KC_LCTL,            KC_LALT,                      KC_SPC,                                          KC_RALT,                        KC_LEFT,   KC_DOWN,  KC_RGHT),
+	
+[1] = LAYOUT_all(
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,   KC_F8,     KC_F9,   KC_F10,    KC_F11,    KC_F12,   KC_TRNS,   KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,             KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,                       KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,                        KC_TRNS,   KC_TRNS,  KC_TRNS, 
+    KC_TRNS,            KC_TRNS,                      KC_TRNS,                                         KC_TRNS,                        KC_TRNS,   KC_TRNS,  KC_TRNS)
+};
--- a/keyboards/kwstudio/scorpio/keymaps/via/keymap.c
+++ b/keyboards/kwstudio/scorpio/keymaps/via/keymap.c
@ -0,0 +1,34 @@
+/* Copyright 2023 kwstudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(
+    KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,    KC_8,      KC_9,    KC_0,      KC_MINS,   KC_EQL,   KC_BSPC,   KC_SPC, 
+    KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,      KC_O,    KC_P,      KC_LBRC,   KC_RBRC,  KC_BSLS,             KC_PGUP, 
+    KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,    KC_K,      KC_L,    KC_SCLN,   KC_QUOT,   KC_ENT,                        KC_PGDN, 
+    KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,    KC_COMM,   KC_DOT,  KC_SLSH,   KC_RSFT,                        KC_UP,    MO(1), 
+    KC_LCTL,            KC_LALT,                      KC_SPC,                                          KC_RALT,                        KC_LEFT,   KC_DOWN,  KC_RGHT),
+	
+[1] = LAYOUT_all(
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,   KC_F8,     KC_F9,   KC_F10,    KC_F11,    KC_F12,   KC_TRNS,   KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,             KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,                       KC_TRNS, 
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,                        KC_TRNS,   KC_TRNS,  KC_TRNS, 
+    KC_TRNS,            KC_TRNS,                      KC_TRNS,                                         KC_TRNS,                        KC_TRNS,   KC_TRNS,  KC_TRNS)
+};
--- a/keyboards/kwstudio/scorpio/keymaps/via/rules.mk
+++ b/keyboards/kwstudio/scorpio/keymaps/via/rules.mk
@ -0,0 +1 @@
+VIA_ENABLE = yes
--- a/keyboards/kwstudio/scorpio/readme.md
+++ b/keyboards/kwstudio/scorpio/readme.md
@ -0,0 +1,25 @@
+# Scorpio
+
+![Scorpio](https://i.imgur.com/ikAlEQMh.jpeg)
+
+* Keyboard Maintainer: [khchen](https://github.com/khchen2004)
+* Hardware Supported: Scorpio PCB
+* Hardware Availability: Private GB
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kwstudio/scorpio:default
+
+Flashing example for this keyboard:
+
+    make kwstudio/scorpio:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
--- a/keyboards/kwstudio/scorpio/rules.mk
+++ b/keyboards/kwstudio/scorpio/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/lily58/keymaps/mb_via/config.h
+++ b/keyboards/lily58/keymaps/mb_via/config.h
@ -0,0 +1,32 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2023 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
--- a/keyboards/lily58/keymaps/mb_via/keymap.c
+++ b/keyboards/lily58/keymaps/mb_via/keymap.c
@ -0,0 +1,121 @@
+ /* Copyright 2020 Naoki Katahira
+  * Copyright 2023 Elliot Powell
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+enum layer_number {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
+};
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * | ESC  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |  ~   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  |  -   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |LCTRL |   A  |   S  |   D  |   F  |   G  |-------.    ,-------|   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |LShift|   Z  |   X  |   C  |   V  |   B  |-------|    |-------|   N  |   M  |   ,  |   .  |   /  |RShift|
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+
+ [_QWERTY] = LAYOUT(
+  KC_ESC,   KC_1,   KC_2,    KC_3,    KC_4,    KC_5,                     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_GRV,
+  KC_TAB,   KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,                     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS,
+  KC_LCTL,  KC_A,   KC_S,    KC_D,    KC_F,    KC_G,                     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT,  KC_Z,   KC_X,    KC_C,    KC_V,    KC_B, KC_LBRC,  KC_RBRC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,
+                      LOWER, KC_LGUI,  KC_LALT, KC_SPC,   KC_ENT,   KC_BSPC,  KC_RGUI, RAISE
+),
+/* LOWER
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |   1  |   2  |   3  |   4  |   5  |-------.    ,-------|   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|   |  |   `  |   +  |   {  |   }  |      |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+[_LOWER] = LAYOUT(
+  _______, _______, _______, _______, _______, _______,                   _______, _______, _______,_______, _______, _______,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE, KC_GRAVE, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+                             _______, _______, _______, _______, _______,  _______, _______, _______
+),
+/* RAISE
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |                    |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |RGBTOG|RGBHUI|RGBSAI|RGBVAI|      |-------.    ,-------|      | Left | Down |  Up  |Right |      |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |RGBMOD|RGBHUD|RGBSAD|RGBVAD|      |      |-------|    |-------|   +  |   =  |   [  |   ]  |   \  |      |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+
+[_RAISE] = LAYOUT(
+  _______, _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______,
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                       KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______,                     XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, XXXXXXX,
+  RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______,   _______, _______, KC_PLUS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, _______,
+                             _______, _______, _______,  _______, _______,  _______, _______, _______
+),
+
+/* ADJUST
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------.    ,-------|      |      |      |      |      |      |
+ * |------+------+------+------+------+------|       |    |       |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|      |      |      |      |      |      |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `----------------------------'           '------''--------------------'
+ */
+  [_ADJUST] = LAYOUT(
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                             _______, _______, _______, _______, _______,  _______, _______, _______
+  )
+};
+
+
--- a/keyboards/lily58/keymaps/mb_via/rules.mk
+++ b/keyboards/lily58/keymaps/mb_via/rules.mk
@ -0,0 +1,4 @@
+VIA_ENABLE = yes
+OLED_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
--- a/keyboards/meetlab/kafka68/info.json
+++ b/keyboards/meetlab/kafka68/info.json
@ -0,0 +1,102 @@
+{
+    "manufacturer": "lucky_studio",
+    "keyboard_name": "kafka68",
+    "maintainer": "yuezp",
+    "development_board": "bluepill",
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "matrix_pins": {
+        "cols": ["A10", "B7", "B6", "B5", "B4", "B3", "A15", "B0", "A7", "A6", "A5", "A4", "A3", "B1", "B10", "B11"],
+        "rows": ["B13", "B14", "B15", "A8", "A9"]
+    },
+    "url": "",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0xAA07",
+        "vid": "0xBB07"
+    },
+    "community_layouts": ["68_ansi"],
+    "layouts": {
+        "LAYOUT_68_ansi": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
+                {"matrix": [0, 14], "x": 15.25, "y": 0},
+                {"matrix": [0, 15], "x": 16.25, "y": 0},
+
+                {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "x": 12.5, "y": 1, "w": 1.5},
+                {"matrix": [1, 14], "x": 15.25, "y": 1},
+                {"matrix": [1, 15], "x": 16.25, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
+
+                {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
+                {"matrix": [3, 1], "x": 2.25, "y": 3},
+                {"matrix": [3, 2], "x": 3.25, "y": 3},
+                {"matrix": [3, 3], "x": 4.25, "y": 3},
+                {"matrix": [3, 4], "x": 5.25, "y": 3},
+                {"matrix": [3, 5], "x": 6.25, "y": 3},
+                {"matrix": [3, 6], "x": 7.25, "y": 3},
+                {"matrix": [3, 7], "x": 8.25, "y": 3},
+                {"matrix": [3, 8], "x": 9.25, "y": 3},
+                {"matrix": [3, 9], "x": 10.25, "y": 3},
+                {"matrix": [3, 10], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 2.75},
+                {"matrix": [3, 14], "x": 15.25, "y": 3},
+
+                {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
+                {"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
+                {"matrix": [4, 9], "x": 10, "y": 4, "w": 1.25},
+                {"matrix": [4, 10], "x": 11.25, "y": 4, "w": 1.25},
+                {"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
+                {"matrix": [4, 13], "x": 14.25, "y": 4},
+                {"matrix": [4, 14], "x": 15.25, "y": 4},
+                {"matrix": [4, 15], "x": 16.25, "y": 4}
+            ]
+        }
+    }
+}
--- a/keyboards/meetlab/kafka68/keymaps/default/keymap.c
+++ b/keyboards/meetlab/kafka68/keymaps/default/keymap.c
@ -0,0 +1,35 @@
+/* Copyright 2022 LXF-YZP(yuezp)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0]=LAYOUT_68_ansi(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,  KC_7,    KC_8,    KC_9,     KC_0,     KC_MINS, KC_EQL,  KC_BSPC, KC_INS, KC_HOME, 
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,  KC_U,    KC_I,    KC_O,     KC_P,     KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, 
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,  KC_J,    KC_K,    KC_L,     KC_SCLN,  KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,  KC_M,    KC_COMM, KC_DOT,   KC_SLSH,           KC_RSFT,          KC_UP, 
+    KC_LCTL, KC_LGUI, KC_LALT,                           KC_SPC,                  KC_RALT,  KC_RGUI,  MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+[1]=LAYOUT_68_ansi(
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
--- a/keyboards/meetlab/kafka68/keymaps/via/keymap.c
+++ b/keyboards/meetlab/kafka68/keymaps/via/keymap.c
@ -0,0 +1,35 @@
+/* Copyright 2022 LXF-YZP(yuezp)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0]=LAYOUT_68_ansi(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,  KC_7,    KC_8,    KC_9,     KC_0,     KC_MINS, KC_EQL,  KC_BSPC, KC_INS, KC_HOME, 
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,    KC_Y,  KC_U,    KC_I,    KC_O,     KC_P,     KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, 
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,    KC_H,  KC_J,    KC_K,    KC_L,     KC_SCLN,  KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,    KC_B,    KC_N,  KC_M,    KC_COMM, KC_DOT,   KC_SLSH,           KC_RSFT,          KC_UP, 
+    KC_LCTL, KC_LGUI, KC_LALT,                           KC_SPC,                  KC_RALT,  KC_RGUI,  MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+[1]=LAYOUT_68_ansi(
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
--- a/keyboards/meetlab/kafka68/keymaps/via/rules.mk
+++ b/keyboards/meetlab/kafka68/keymaps/via/rules.mk
@ -0,0 +1 @@
+VIA_ENABLE = yes
--- a/keyboards/meetlab/kafka68/matrix_diagram.md
+++ b/keyboards/meetlab/kafka68/matrix_diagram.md
@ -0,0 +1,16 @@
+# Matrix Diagram for kafka68
+
+```
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┐    
+│00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D     ││0E │0F │    
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┤   
+│10   │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D   ││1E │1F │
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┘   
+│20    │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C      │             
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤┌───┐       
+│30      │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3C        ││3E │
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬───┬──┬──┴┼───┼───┐
+│40  │41  │42  │45                      │49  │4A  │4B │  │4D │4E │4F │
+└────┴────┴────┴────────────────────────┴────┴────┴───┘  └───┴───┴───┘
+
+```
--- a/keyboards/meetlab/kafka68/readme.md
+++ b/keyboards/meetlab/kafka68/readme.md
@ -0,0 +1,26 @@
+# kafka68 - PCB
+
+![kafka68](https://i.imgur.com/5w8fESLh.jpg)
+
+A 68 key keyboard made by Lucky, based on hhkb layout.
+
+* Keyboard Maintainer: https://github.com/LXF-YZP
+* Hardware Supported: Lucky PCB
+
+Make example for this keyboard (after setting up your build environment):
+    
+    make meetlab/kafka68:default
+    
+Flashing example for this keyboard:
+
+    make meetlab/kafka68:default:flash
+    
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
--- a/keyboards/meetlab/kafka68/rules.mk
+++ b/keyboards/meetlab/kafka68/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/momokai/aurora/readme.md
+++ b/keyboards/momokai/aurora/readme.md
@ -1,12 +1,14 @@
 # Momokai Aurora

+![Momokai Aurora](https://i.imgur.com/A7iHqzAh.jpg)
+
 https://www.momokai.com/pages/aurora

 A 6 key keypad with a rotary encoder

 * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
 * Hardware Supported: Aurora
-* Hardware Availability: [Momokai](https://www.momokai.com/)
+* Hardware Availability: [Momokai](https://www.momokai.com/pages/aurora)

 Make example for this keyboard (after setting up your build environment):

--- a/keyboards/sawnsprojects/re65/info.json
+++ b/keyboards/sawnsprojects/re65/info.json
@ -0,0 +1,370 @@
+{
+    "keyboard_name": "RE65",
+    "maintainer": "Salane",
+    "manufacturer": "Mai The San",
+    "url": "",
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "vid": "0x534C",
+        "pid": "0x0C65",
+        "device_version": "0.0.1"
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": false,
+        "command": false,
+        "nkro": true,
+        "rgblight": true,
+        "encoder": true
+    },
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "rows": ["GP27", "GP26", "GP25", "GP29", "GP4"],
+        "cols": ["GP20", "GP19", "GP18", "GP24", "GP23", "GP22", "GP17", "GP28", "GP2", "GP3", "GP12", "GP11", "GP10", "GP9", "GP8"]
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "GP5", "pin_b": "GP6"}
+        ]
+    },
+    "rgblight": {
+        "led_count": 32,
+        "saturation_steps": 8,
+        "brightness_steps": 8,
+        "sleep": true,
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "pin": "GP21",
+        "driver": "vendor"
+    },
+    "community_layouts": ["65_ansi_blocker","65_ansi_blocker_split_bs","65_ansi_blocker_tsangan","65_ansi_blocker_tsangan_split_bs"],
+    "layouts": {
+        "LAYOUT_65_ansi_blocker_split_bs": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0},
+                {"matrix": [2, 13], "x": 14, "y": 0},
+                {"matrix": [0, 14], "x": 15, "y": 0},
+
+                {"matrix": [1, 0], "w": 1.5, "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1},
+                {"matrix": [1, 14], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "w": 1.75, "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2},
+                {"matrix": [2, 14], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "w": 2.25, "x": 0, "y": 3},
+                {"matrix": [3, 2], "x": 2.25, "y": 3},
+                {"matrix": [3, 3], "x": 3.25, "y": 3},
+                {"matrix": [3, 4], "x": 4.25, "y": 3},
+                {"matrix": [3, 5], "x": 5.25, "y": 3},
+                {"matrix": [3, 6], "x": 6.25, "y": 3},
+                {"matrix": [3, 7], "x": 7.25, "y": 3},
+                {"matrix": [3, 8], "x": 8.25, "y": 3},
+                {"matrix": [3, 9], "x": 9.25, "y": 3},
+                {"matrix": [3, 10], "x": 10.25, "y": 3},
+                {"matrix": [3, 11], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3},
+                {"matrix": [3, 13], "x": 14, "y": 3},
+                {"matrix": [3, 14], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "w": 1.25, "x": 0, "y": 4},
+                {"matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4},
+                {"matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4},
+
+                {"matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4},
+
+                {"matrix": [4, 10], "w": 1.25, "x": 10, "y": 4},
+                {"matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4},
+
+                {"matrix": [4, 12], "x": 13, "y": 4},
+                {"matrix": [4, 13], "x": 14, "y": 4},
+                {"matrix": [4, 14], "x": 15, "y": 4}
+            ]
+        },
+        "LAYOUT_65_ansi_blocker": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "w": 2,  "x": 13, "y": 0},
+                {"matrix": [0, 14], "x": 15, "y": 0},
+
+                {"matrix": [1, 0], "w": 1.5, "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1},
+                {"matrix": [1, 14], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "w": 1.75, "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2},
+                {"matrix": [2, 14], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "w": 2.25, "x": 0, "y": 3},
+                {"matrix": [3, 2], "x": 2.25, "y": 3},
+                {"matrix": [3, 3], "x": 3.25, "y": 3},
+                {"matrix": [3, 4], "x": 4.25, "y": 3},
+                {"matrix": [3, 5], "x": 5.25, "y": 3},
+                {"matrix": [3, 6], "x": 6.25, "y": 3},
+                {"matrix": [3, 7], "x": 7.25, "y": 3},
+                {"matrix": [3, 8], "x": 8.25, "y": 3},
+                {"matrix": [3, 9], "x": 9.25, "y": 3},
+                {"matrix": [3, 10], "x": 10.25, "y": 3},
+                {"matrix": [3, 11], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3},
+                {"matrix": [3, 13], "x": 14, "y": 3},
+                {"matrix": [3, 14], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "w": 1.25, "x": 0, "y": 4},
+                {"matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4},
+                {"matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4},
+
+                {"matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4},
+
+                {"matrix": [4, 10], "w": 1.25, "x": 10, "y": 4},
+                {"matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4},
+
+                {"matrix": [4, 12], "x": 13, "y": 4},
+                {"matrix": [4, 13], "x": 14, "y": 4},
+                {"matrix": [4, 14], "x": 15, "y": 4}
+            ]
+        },
+        "LAYOUT_65_ansi_blocker_tsangan": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "w": 2,  "x": 13, "y": 0},
+                {"matrix": [0, 14], "x": 15, "y": 0},
+
+                {"matrix": [1, 0], "w": 1.5, "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1},
+                {"matrix": [1, 14], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "w": 1.75, "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2},
+                {"matrix": [2, 14], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "w": 2.25, "x": 0, "y": 3},
+                {"matrix": [3, 2], "x": 2.25, "y": 3},
+                {"matrix": [3, 3], "x": 3.25, "y": 3},
+                {"matrix": [3, 4], "x": 4.25, "y": 3},
+                {"matrix": [3, 5], "x": 5.25, "y": 3},
+                {"matrix": [3, 6], "x": 6.25, "y": 3},
+                {"matrix": [3, 7], "x": 7.25, "y": 3},
+                {"matrix": [3, 8], "x": 8.25, "y": 3},
+                {"matrix": [3, 9], "x": 9.25, "y": 3},
+                {"matrix": [3, 10], "x": 10.25, "y": 3},
+                {"matrix": [3, 11], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3},
+                {"matrix": [3, 13], "x": 14, "y": 3},
+                {"matrix": [3, 14], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "w": 1.5, "x": 0, "y": 4},
+                {"matrix": [4, 1], "x": 1.5, "y": 4},
+                {"matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4},
+
+                {"matrix": [4, 6], "w": 7, "x": 4, "y": 4},
+
+                {"matrix": [4, 11], "w": 1.5, "x": 11, "y": 4},
+
+                {"matrix": [4, 12], "x": 13, "y": 4},
+                {"matrix": [4, 13], "x": 14, "y": 4},
+                {"matrix": [4, 14], "x": 15, "y": 4}
+            ]
+        },
+        "LAYOUT_65_ansi_blocker_tsangan_split_bs": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+                {"matrix": [0, 6], "x": 6, "y": 0},
+                {"matrix": [0, 7], "x": 7, "y": 0},
+                {"matrix": [0, 8], "x": 8, "y": 0},
+                {"matrix": [0, 9], "x": 9, "y": 0},
+                {"matrix": [0, 10], "x": 10, "y": 0},
+                {"matrix": [0, 11], "x": 11, "y": 0},
+                {"matrix": [0, 12], "x": 12, "y": 0},
+                {"matrix": [0, 13], "x": 13, "y": 0},
+                {"matrix": [2, 13], "x": 14, "y": 0},
+                {"matrix": [0, 14], "x": 15, "y": 0},
+
+                {"matrix": [1, 0], "w": 1.5, "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1.5, "y": 1},
+                {"matrix": [1, 2], "x": 2.5, "y": 1},
+                {"matrix": [1, 3], "x": 3.5, "y": 1},
+                {"matrix": [1, 4], "x": 4.5, "y": 1},
+                {"matrix": [1, 5], "x": 5.5, "y": 1},
+                {"matrix": [1, 6], "x": 6.5, "y": 1},
+                {"matrix": [1, 7], "x": 7.5, "y": 1},
+                {"matrix": [1, 8], "x": 8.5, "y": 1},
+                {"matrix": [1, 9], "x": 9.5, "y": 1},
+                {"matrix": [1, 10], "x": 10.5, "y": 1},
+                {"matrix": [1, 11], "x": 11.5, "y": 1},
+                {"matrix": [1, 12], "x": 12.5, "y": 1},
+                {"matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1},
+                {"matrix": [1, 14], "x": 15, "y": 1},
+
+                {"matrix": [2, 0], "w": 1.75, "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1.75, "y": 2},
+                {"matrix": [2, 2], "x": 2.75, "y": 2},
+                {"matrix": [2, 3], "x": 3.75, "y": 2},
+                {"matrix": [2, 4], "x": 4.75, "y": 2},
+                {"matrix": [2, 5], "x": 5.75, "y": 2},
+                {"matrix": [2, 6], "x": 6.75, "y": 2},
+                {"matrix": [2, 7], "x": 7.75, "y": 2},
+                {"matrix": [2, 8], "x": 8.75, "y": 2},
+                {"matrix": [2, 9], "x": 9.75, "y": 2},
+                {"matrix": [2, 10], "x": 10.75, "y": 2},
+                {"matrix": [2, 11], "x": 11.75, "y": 2},
+                {"matrix": [2, 12], "w": 2.25, "x": 12.75, "y": 2},
+                {"matrix": [2, 14], "x": 15, "y": 2},
+
+                {"matrix": [3, 0], "w": 2.25, "x": 0, "y": 3},
+                {"matrix": [3, 2], "x": 2.25, "y": 3},
+                {"matrix": [3, 3], "x": 3.25, "y": 3},
+                {"matrix": [3, 4], "x": 4.25, "y": 3},
+                {"matrix": [3, 5], "x": 5.25, "y": 3},
+                {"matrix": [3, 6], "x": 6.25, "y": 3},
+                {"matrix": [3, 7], "x": 7.25, "y": 3},
+                {"matrix": [3, 8], "x": 8.25, "y": 3},
+                {"matrix": [3, 9], "x": 9.25, "y": 3},
+                {"matrix": [3, 10], "x": 10.25, "y": 3},
+                {"matrix": [3, 11], "x": 11.25, "y": 3},
+                {"matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3},
+                {"matrix": [3, 13], "x": 14, "y": 3},
+                {"matrix": [3, 14], "x": 15, "y": 3},
+
+                {"matrix": [4, 0], "w": 1.5, "x": 0, "y": 4},
+                {"matrix": [4, 1], "x": 1.5, "y": 4},
+                {"matrix": [4, 2], "w": 1.5, "x": 2.5, "y": 4},
+
+                {"matrix": [4, 6], "w": 7, "x": 4, "y": 4},
+
+                {"matrix": [4, 11], "w": 1.5, "x": 11, "y": 4},
+
+                {"matrix": [4, 12], "x": 13, "y": 4},
+                {"matrix": [4, 13], "x": 14, "y": 4},
+                {"matrix": [4, 14], "x": 15, "y": 4}
+            ]
+        }
+    }
+}
--- a/keyboards/sawnsprojects/re65/keymaps/default/keymap.c
+++ b/keyboards/sawnsprojects/re65/keymaps/default/keymap.c
@ -0,0 +1,57 @@
+// Copyright 2023 MaiTheSan (@maithesan)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+enum {
+    _BASE,
+    _FN1
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Base Layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+ * │Esc│! 1│@ 2│# 3│$ 4│% 5│^ 6│& 7│* 8│( 9│) 0│_ -│+ =│ Bckspc│Hom│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+ * │Tab  │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │{ [│} ]│|   \│PgU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │HyCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │: ;│" '│   Enter│PgD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │Shift   │ Z │ X │ C │ V │ B │ N │ M │< ,│> .│? /│ Shift│ Up│End│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+ * │Ctrl│ Opt│ Cmd│          Space         │Cmd │FnPy│ │Lef│Dow│Rig│
+ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+ */
+[_BASE] = LAYOUT_65_ansi_blocker(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+    KC_LCTL, KC_LOPT, KC_LCMD,                            KC_SPC,                    KC_RCMD, MO(_FN1),          KC_LEFT, KC_DOWN, KC_RGHT
+),
+/* Function Layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+ * │` ~│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│ Delete│SlD│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+ * │RMod │RH+│RS+│RV+│AS+│   │   │   │   │   │F13│F14│F15│ LHP │VlU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │RTgl  │RH-│RS-│RV-│AS-│   │   │   │   │   │   │   │        │VlD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │        │LYR│Thm│   │   │RST│   │Mke│Prv│Nxt│Ply│      │PgU│Mut│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+ * │    │    │    │                        │    │    │ │Hom│PgD│End│
+ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+ */
+[_FN1] = LAYOUT_65_ansi_blocker(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F13,  KC_F14,  KC_F15,  _______, KC_VOLU,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_VOLD,
+    _______, _______, _______, _______, _______, QK_BOOT, _______, _______, KC_MPRV, KC_MNXT, KC_MPLY, _______, KC_PGUP, KC_MUTE,
+    _______, _______, _______,                            _______,                   _______, _______,          KC_HOME, KC_PGDN, KC_END
+),
+};
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [_BASE] = { ENCODER_CCW_CW(KC_PGDN, KC_PGUP) },
+    [_FN1] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }
+};
+#endif // ENCODER_MAP_ENABLE
--- a/keyboards/sawnsprojects/re65/keymaps/default/rules.mk
+++ b/keyboards/sawnsprojects/re65/keymaps/default/rules.mk
@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes
--- a/keyboards/sawnsprojects/re65/keymaps/via/keymap.c
+++ b/keyboards/sawnsprojects/re65/keymaps/via/keymap.c
@ -0,0 +1,57 @@
+// Copyright 2023 MaiTheSan (@maithesan)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+enum {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Base Layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │Esc│! 1│@ 2│# 3│$ 4│% 5│^ 6│& 7│* 8│( 9│) 0│_ -│+ =│Bsp│Bsp│Hom│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+ * │Tab  │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │{ [│} ]│|   \│PgU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │HyCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │: ;│" '│   Enter│PgD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │Shift   │ Z │ X │ C │ V │ B │ N │ M │< ,│> .│? /│ Shift│ Up│End│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+ * │Ctrl│ Opt│ Cmd│          Space         │Cmd │FnPy│ │Lef│Dow│Rig│
+ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+ */
+[_BASE] = LAYOUT_65_ansi_blocker_split_bs(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+    KC_LCTL, KC_LOPT, KC_LCMD,                            KC_SPC,                    KC_RCMD, MO(_FN1),          KC_LEFT, KC_DOWN, KC_RGHT
+),
+/* Function Layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │` ~│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│Del│   │   │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+ * │RMod │RH+│RS+│RV+│AS+│   │   │   │   │   │F13│F14│F15│ LHP │VlU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │RTgl  │RH-│RS-│RV-│AS-│   │   │   │   │   │   │   │        │VlD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │        │LYR│Thm│   │   │RST│   │Mke│Prv│Nxt│Ply│      │PgU│Mut│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+ * │    │    │    │                        │    │    │ │Hom│PgD│End│
+ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+ */
+[_FN1] = LAYOUT_65_ansi_blocker_split_bs(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F13,  KC_F14,  KC_F15,  _______, KC_VOLU,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_VOLD,
+    _______, _______, _______, _______, _______, QK_BOOT, _______, _______, KC_MPRV, KC_MNXT, KC_MPLY, _______, KC_PGUP, KC_MUTE,
+    _______, _______, _______,                            _______,                   _______, _______,          KC_HOME, KC_PGDN, KC_END
+),
+};
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [_BASE] =   { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+    [_FN1] =  { ENCODER_CCW_CW(KC_BRID, KC_BRIU) },
+};
+#endif
--- a/keyboards/sawnsprojects/re65/keymaps/via/rules.mk
+++ b/keyboards/sawnsprojects/re65/keymaps/via/rules.mk
@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
--- a/keyboards/sawnsprojects/re65/readme.md
+++ b/keyboards/sawnsprojects/re65/readme.md
@ -0,0 +1,26 @@
+# RE65
+
+![RE65](https://i.imgur.com/bzeWSwwh.png)
+
+A Keyboard from Nuxros
+
+* Keyboard Maintainer: [Mai The San](https://github.com/maithesan)
+* Hardware Supported: RE65, KBD67 MKII
+* Hardware Availability: [Nuxros Store](https://nuxroskb.store/en/products/re65?variant=45628371370283)
+Make example for this keyboard (after setting up your build environment):
+
+    make sawnsprojects/re65:default
+
+Flashing example for this keyboard:
+
+    make sawnsprojects/re65:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
--- a/keyboards/sawnsprojects/re65/rules.mk
+++ b/keyboards/sawnsprojects/re65/rules.mk
@ -0,0 +1 @@
+# This file intentionally left blank
--- a/keyboards/takashicompany/heavy_left/readme.md
+++ b/keyboards/takashicompany/heavy_left/readme.md
@ -10,7 +10,7 @@ It also supports key switch replacement with MX sockets and LED underglow.
 左手側にテンキーが備え付けられており、数字の入力だけでなく専用のマクロパッドとしても使用が可能です。  
 MXソケットによるキースイッチの付替えや、LEDによるアンダーグロウにも対応しています。  

-* Keyboard Maintainer: [takashicompany](https://github.com/yourusername)
+* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
 * Hardware Supported: PCB, Pro Micro 
 * Hardware Availability: https://github.com/takashicompany/heavy_left

--- a/keyboards/takashicompany/radialex/readme.md
+++ b/keyboards/takashicompany/radialex/readme.md
@ -8,7 +8,7 @@ Your iconic keys and keycaps can be placed in the center of the keyboard.
 It is possible to make it shine with LED backlighting.  
 The keyswitches can also be replaced with MX sockets.  

-* Keyboard Maintainer: [takashicompany](https://github.com/yourusername)
+* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
 * Hardware Supported: PCB, Pro Micro
 * Hardware Availability: https://github.com/takashicompany/radialex

--- a/keyboards/themadnoodle/noodlepad_micro/config.h
+++ b/keyboards/themadnoodle/noodlepad_micro/config.h
@ -0,0 +1,6 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5
--- a/keyboards/themadnoodle/noodlepad_micro/info.json
+++ b/keyboards/themadnoodle/noodlepad_micro/info.json
@ -0,0 +1,72 @@
+{
+    "manufacturer": "The Mad Noodle",
+    "keyboard_name": "NoodlePad Micro",
+    "maintainer": "the-mad-noodle",
+    "url": "https://www.madnoodleprototypes.com/",
+    "bootloader": "rp2040",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true,
+        "encoder": true
+    },
+    "rgblight": {
+        "hue_steps": 10,
+        "led_count": 4,
+        "sleep": true,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
+    "matrix_pins": {
+        "cols": ["GP6", "GP7", "GP0"],
+        "rows": ["GP26", "GP27", "GP28"]
+    },
+    "processor": "RP2040",
+    "usb": {
+        "device_version": "3.0.0",
+        "pid": "0x0004",
+        "vid": "0x6A6C"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 0], "x": 0, "y": 2}
+            ]
+        }
+    },
+    "ws2812": {
+        "pin": "GP29",
+        "driver": "vendor"
+    },
+    "encoder": {
+        "rotary": [
+            { "pin_a": "GP2", "pin_b": "GP1" }
+            { "pin_a": "GP3", "pin_b": "GP4" }
+        ]
+    
+    }
+
+
+}
--- a/keyboards/themadnoodle/noodlepad_micro/keymaps/default/keymap.c
+++ b/keyboards/themadnoodle/noodlepad_micro/keymaps/default/keymap.c
@ -0,0 +1,68 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* LAYER 0
+     * ,--ENC2--       --ENC1--.
+     * |   <<  |       |  >>   |
+     * |-------+-------+-------|
+     * |  STOP |  PLAY | MEDIA |
+     * |-------+-------+-------|
+     * | CALC  | MAIL  | PC/FN |
+     * `-----------------------'
+     */
+
+    [0] = LAYOUT(
+      KC_MPRV,           KC_MNXT, 
+      KC_MSTP, KC_MPLY, KC_MSEL,
+      LT(2,KC_CALC), KC_MAIL, LT(1, KC_MYCM)
+      ),
+
+
+    /* LAYER 1
+     * ,--ENC2--       --ENC1--.
+     * | MODE+ |       | MODE- |  
+     * |-------+-------+-------|
+     * |Bright-|  Tog  |Bright+|
+     * |-------+-------+-------|
+     * | PLAIN |BREATH |       |
+     * `-----------------------'
+     */
+    
+    [1] = LAYOUT(
+      RGB_MOD,          RGB_RMOD, 
+      RGB_VAD, RGB_TOG, RGB_VAI, 
+      RGB_M_P, RGB_M_B, KC_TRNS
+      ),
+
+      
+    /* LAYER 2 (ENCODER)
+     * ,--ENC2--       --ENC1--.
+     * |       |       |       |  
+     * |-------+-------+-------|
+     * |       |       |       |
+     * |-------+-------+-------|
+     * |       |       |       |
+     * `-----------------------'
+     */
+    
+    [2] = LAYOUT(
+      KC_TRNS,          KC_TRNS, 
+      KC_TRNS, KC_TRNS, KC_TRNS, 
+      KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};
+
+
+/*Encoder Mapping*/
+//-----------------------(ENC1)---------------------------------(ENC2)-----------------
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  { ENCODER_CCW_CW(KC_LEFT, KC_RGHT),      ENCODER_CCW_CW(KC_VOLD, KC_VOLU)  },
+    [1] =  { ENCODER_CCW_CW(RGB_HUD, RGB_HUI),      ENCODER_CCW_CW(RGB_SAD, RGB_SAI)  },
+    [2] =  { ENCODER_CCW_CW(RGB_VAD, RGB_VAI),      ENCODER_CCW_CW(RGB_SPD, RGB_SPI)  }
+};
+#endif
--- a/keyboards/themadnoodle/noodlepad_micro/keymaps/default/rules.mk
+++ b/keyboards/themadnoodle/noodlepad_micro/keymaps/default/rules.mk
@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes
--- a/keyboards/themadnoodle/noodlepad_micro/keymaps/via/keymap.c
+++ b/keyboards/themadnoodle/noodlepad_micro/keymaps/via/keymap.c
@ -0,0 +1,87 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* LAYER 0
+     * ,--ENC2--       --ENC1--.
+     * |   <<  |       |  >>   |  
+     * |-------+-------+-------|
+     * |  STOP |  PLAY | MEDIA |
+     * |-------+-------+-------|
+     * | CALC  | MY PC | TO(3) |
+     * `-----------------------'
+     */
+
+    [0] = LAYOUT(
+      KC_MPRV,           KC_MNXT, 
+      KC_MSTP, KC_MPLY, KC_MSEL,
+      KC_CALC, KC_MYCM, TO(3)
+      ),
+
+
+    /* LAYER 1
+     * ,--ENC2--       --ENC1--.
+     * | MODE+ |       | MODE- |  
+     * |-------+-------+-------|
+     * |Bright-|  Tog  |Bright+|
+     * |-------+-------+-------|
+     * | PLAIN |BREATH | TO(0) |
+     * `-----------------------'
+     */
+    
+    [1] = LAYOUT(
+      RGB_MOD,          RGB_RMOD, 
+      RGB_VAD, RGB_TOG, RGB_VAI, 
+      RGB_M_P, RGB_M_B, TO(0)
+      ),
+
+      
+    /* LAYER 2 
+     * ,--ENC2--       --ENC1--.
+     * |       |       |       |  
+     * |-------+-------+-------|
+     * |       |       |       |
+     * |-------+-------+-------|
+     * |       |       | TO(0) |
+     * `-----------------------'
+     */
+    
+    [2] = LAYOUT(
+      KC_TRNS,          KC_TRNS, 
+      KC_TRNS, KC_TRNS, KC_TRNS, 
+      KC_TRNS, KC_TRNS, TO(0)
+      ),
+
+    /* LAYER 3 
+     * ,--ENC2--       --ENC1--.
+     * |       |       |       |  
+     * |-------+-------+-------|
+     * | TO(1) |       | TO(2) |
+     * |-------+-------+-------|
+     * |       |       | TO(0) |
+     * `-----------------------'
+     */
+    
+    [3] = LAYOUT(
+      KC_TRNS,         KC_TRNS, 
+      TO(1), KC_TRNS, TO(2), 
+      KC_TRNS, KC_TRNS, TO(0)
+      )
+    
+};
+
+
+/*Encoder Mapping*/
+//-----------------------(ENC1)---------------------------------(ENC2)-----------------
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  { ENCODER_CCW_CW(KC_LEFT, KC_RGHT),      ENCODER_CCW_CW(KC_VOLD, KC_VOLU)  },
+    [1] =  { ENCODER_CCW_CW(RGB_HUD, RGB_HUI),      ENCODER_CCW_CW(RGB_SAD, RGB_SAI)  },
+    [2] =  { ENCODER_CCW_CW(RGB_VAD, RGB_VAI),      ENCODER_CCW_CW(RGB_SPD, RGB_SPI)  },
+    [3] =  { ENCODER_CCW_CW(KC_LEFT, KC_RGHT),      ENCODER_CCW_CW(KC_DOWN, KC_UP)    },
+
+};
+#endif
--- a/keyboards/themadnoodle/noodlepad_micro/keymaps/via/rules.mk
+++ b/keyboards/themadnoodle/noodlepad_micro/keymaps/via/rules.mk
@ -0,0 +1,2 @@
+ENCODER_MAP_ENABLE = yes
+VIA_ENABLE = yes
--- a/keyboards/themadnoodle/noodlepad_micro/readme.md
+++ b/keyboards/themadnoodle/noodlepad_micro/readme.md
@ -0,0 +1,28 @@
+# NoodlePad [Micro]
+
+![NoodlePad [Micro]](https://i.imgur.com/uRmVt3ah.jpg)
+
+The NoodlePad [Micro] is a 6 key 2 encoder macro keypad designed using RP2040 chipset.
+
+* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle)
+* Hardware Supported: NoodlePad [Micro]
+* Hardware Availability: https://www.madnoodleprototypes.com/shop
+
+Compile example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb themadnoodle/noodlepad_micro -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb themadnoodle/noodlepad_micro -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader & Flashing
+
+
+**Physical reset button**: 
+
+* Double press the button on the back, center, left of the PCB labeled "R" to enter the bootloader drive mode.
+
+* If you have a pre-compiled .uf2 file, copy it into bootloader drive (RPI-RP2), board will reset automatically once file is copied sucessfully
--- a/keyboards/themadnoodle/noodlepad_micro/rules.mk
+++ b/keyboards/themadnoodle/noodlepad_micro/rules.mk
@ -0,0 +1,2 @@
+# This file intentionally left blank
+
--- a/quantum/deferred_exec.c
+++ b/quantum/deferred_exec.c
@ -124,13 +124,19 @@ void deferred_exec_advanced_task(deferred_executor_t *table, size_t table_count,

        // Run through each of the executors
        for (int i = 0; i < table_count; ++i) {
-            deferred_executor_t *entry = &table[i];
+            deferred_executor_t *entry      = &table[i];
+            deferred_token       curr_token = entry->token;

            // Check if we're supposed to execute this entry
-            if (entry->token != INVALID_DEFERRED_TOKEN && ((int32_t)TIMER_DIFF_32(entry->trigger_time, now)) <= 0) {
+            if (curr_token != INVALID_DEFERRED_TOKEN && ((int32_t)TIMER_DIFF_32(entry->trigger_time, now)) <= 0) {
                // Invoke the callback and work work out if we should be requeued
                uint32_t delay_ms = entry->callback(entry->trigger_time, entry->cb_arg);

+                // If the token has changed, then the callback has canceled and re-queued. Skip further processing.
+                if (entry->token != curr_token) {
+                    continue;
+                }
+
                // Update the trigger time if we have to repeat, otherwise clear it out
                if (delay_ms > 0) {
                    // Intentionally add just the delay to the existing trigger time -- this ensures the next