From 3b9132d9d24e0bae90d0678b97b5e8a5a03cee70 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Sun, 17 Nov 2024 03:00:25 +0900 Subject: [PATCH] add custom key --- .../left_slinger/keymaps/default/keymap.c | 2 +- .../left_slinger/left_slinger.c | 399 ++++++++++++++++++ .../left_slinger/left_slinger.h | 17 + 3 files changed, 417 insertions(+), 1 deletion(-) create mode 100644 keyboards/takashicompany/left_slinger/left_slinger.c create mode 100644 keyboards/takashicompany/left_slinger/left_slinger.h diff --git a/keyboards/takashicompany/left_slinger/keymaps/default/keymap.c b/keyboards/takashicompany/left_slinger/keymaps/default/keymap.c index a392a0c74f3..70c2479f53b 100644 --- a/keyboards/takashicompany/left_slinger/keymaps/default/keymap.c +++ b/keyboards/takashicompany/left_slinger/keymaps/default/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [0] = LAYOUT( KC_1, KC_2, KC_3, - KC_4, KC_5, KC_6, KC_7, + KC_4, KC_5, KC_6, KC_MY_BTN1, KC_8, KC_9, KC_0, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, KC_H diff --git a/keyboards/takashicompany/left_slinger/left_slinger.c b/keyboards/takashicompany/left_slinger/left_slinger.c new file mode 100644 index 00000000000..10e3243566b --- /dev/null +++ b/keyboards/takashicompany/left_slinger/left_slinger.c @@ -0,0 +1,399 @@ +// #include +#include "quantum.h" +#include "left_slinger.h" +#include "custom_joystick.h" + +///////////////////////////// +/// miniZoneの実装 ここから /// +//////////////////////////// + +#define MOUSE_SCROLL_V_REVERSE_BIT (1 << 0) // 0000 0001 +#define MOUSE_SCROLL_H_REVERSE_BIT (1 << 1) // 0000 0010 +#define IS_OLED_LOGO_BIT (1 << 2) // 0000 0100 + +enum click_state { + NONE = 0, + WAITING, // マウスレイヤーが有効になるのを待つ。 Wait for mouse layer to activate. + CLICKABLE, // マウスレイヤー有効になりクリック入力が取れる。 Mouse layer is enabled to take click input. + CLICKING, // クリック中。 Clicking. + SCROLLING // スクロール中。 Scrolling. +}; + +typedef union { + uint32_t raw; + + struct { + // int16_t to_clickable_time; // // この秒数(千分の一秒)、WAITING状態ならクリックレイヤーが有効になる。 For this number of seconds (milliseconds), if in WAITING state, the click layer is activated. + int16_t joystick_ratio; + int8_t to_clickable_movement; + uint8_t settings; + }; +} user_config_t; + +user_config_t user_config; + +enum click_state state; // 現在のクリック入力受付の状態 Current click input reception status +uint16_t click_timer; // タイマー。状態に応じて時間で判定する。 Timer. Time to determine the state of the system. + +// uint16_t to_clickable_time = 50; // この秒数(千分の一秒)、WAITING状態ならクリックレイヤーが有効になる。 For this number of seconds (milliseconds), if in WAITING state, the click layer is activated. +uint16_t to_reset_time = 1000; // この秒数(千分の一秒)、CLICKABLE状態ならクリックレイヤーが無効になる。 For this number of seconds (milliseconds), the click layer is disabled if in CLICKABLE state. + +const uint16_t click_layer = 8; // マウス入力が可能になった際に有効になるレイヤー。Layers enabled when mouse input is enabled + +int16_t scroll_v_mouse_interval_counter; // 垂直スクロールの入力をカウントする。　Counting Vertical Scroll Inputs +int16_t scroll_h_mouse_interval_counter; // 水平スクロールの入力をカウントする。 Counts horizontal scrolling inputs. + +int16_t scroll_v_threshold = 50; // この閾値を超える度に垂直スクロールが実行される。 Vertical scrolling is performed each time this threshold is exceeded. +int16_t scroll_h_threshold = 50; // この閾値を超える度に水平スクロールが実行される。 Each time this threshold is exceeded, horizontal scrolling is performed. + +int16_t after_click_lock_movement = 0; // クリック入力後の移動量を測定する変数。 Variable that measures the amount of movement after a click input. + +int16_t mouse_record_threshold = 30; // ポインターの動きを一時的に記録するフレーム数。 Number of frames in which the pointer movement is temporarily recorded. +int16_t mouse_move_count_ratio = 5; // ポインターの動きを再生する際の移動フレームの係数。 The coefficient of the moving frame when replaying the pointer movement. + +const uint16_t ignore_disable_mouse_layer_keys[] = {KC_LGUI, KC_LCTL}; // この配列で指定されたキーはマウスレイヤー中に押下してもマウスレイヤーを解除しない + +int16_t mouse_movement; +uint32_t press_count; + +void eeconfig_init_kb(void) { + user_config.raw = 0; + user_config.joystick_ratio = 100; + user_config.to_clickable_movement = 50; + // 新しいビットフィールド設定 + + user_config.settings = 0; // 初期化 + user_config.settings |= MOUSE_SCROLL_V_REVERSE_BIT * false; // ここでfalseなので実際にはセットしない + user_config.settings |= MOUSE_SCROLL_H_REVERSE_BIT * false; // 同上 + user_config.settings |= IS_OLED_LOGO_BIT * false; // 同上 + + eeconfig_update_kb(user_config.raw); +} + +bool get_mouse_scroll_v_reverse(void) { + return user_config.settings & MOUSE_SCROLL_V_REVERSE_BIT; +} + +bool get_mouse_scroll_h_reverse(void) { + return user_config.settings & MOUSE_SCROLL_H_REVERSE_BIT; +} + +bool get_is_oled_logo(void) { + return user_config.settings & IS_OLED_LOGO_BIT; +} + +void set_mouse_scroll_v_reverse(bool value) { + if (value) { + user_config.settings |= MOUSE_SCROLL_V_REVERSE_BIT; + } else { + user_config.settings &= ~MOUSE_SCROLL_V_REVERSE_BIT; + } +} + +void set_mouse_scroll_h_reverse(bool value) { + if (value) { + user_config.settings |= MOUSE_SCROLL_H_REVERSE_BIT; + } else { + user_config.settings &= ~MOUSE_SCROLL_H_REVERSE_BIT; + } +} + +void set_is_oled_logo(bool value) { + if (value) { + user_config.settings |= IS_OLED_LOGO_BIT; + } else { + user_config.settings &= ~IS_OLED_LOGO_BIT; + } +} + +void keyboard_post_init_kb(void) { + user_config.raw = eeconfig_read_kb(); + // joystick_ratio = user_config.joystick_ratio; +} + +// クリック用のレイヤーを有効にする。　Enable layers for clicks +void enable_click_layer(void) { + layer_on(click_layer); + click_timer = timer_read(); + state = CLICKABLE; +} + +// クリック用のレイヤーを無効にする。 Disable layers for clicks. +void disable_click_layer(void) { + state = NONE; + layer_off(click_layer); + scroll_v_mouse_interval_counter = 0; + scroll_h_mouse_interval_counter = 0; +} + +// 自前の絶対数を返す関数。 Functions that return absolute numbers. +int8_t my_abs(int8_t num) { + if (num < 0) { + num = -num; + } + + return num; +} + +// 現在クリックが可能な状態か。 Is it currently clickable? +bool is_clickable_mode(void) { + return state == CLICKABLE || state == CLICKING || state == SCROLLING; +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + + if (record->event.pressed) { + press_count++; + } + + switch (keycode) { + case KC_MY_BTN1: + case KC_MY_BTN2: + case KC_MY_BTN3: + { + report_mouse_t currentReport = pointing_device_get_report(); + + // どこのビットを対象にするか。 Which bits are to be targeted? + uint8_t btn = 1 << (keycode - KC_MY_BTN1); + + if (record->event.pressed) { + // ビットORは演算子の左辺と右辺の同じ位置にあるビットを比較して、両方のビットのどちらかが「1」の場合に「1」にします。 + // Bit OR compares bits in the same position on the left and right sides of the operator and sets them to "1" if either of both bits is "1". + currentReport.buttons |= btn; + state = CLICKING; + after_click_lock_movement = 30; + } else { + // ビットANDは演算子の左辺と右辺の同じ位置にあるビットを比較して、両方のビットが共に「1」の場合だけ「1」にします。 + // Bit AND compares the bits in the same position on the left and right sides of the operator and sets them to "1" only if both bits are "1" together. + currentReport.buttons &= ~btn; + } + + enable_click_layer(); + + pointing_device_set_report(currentReport); + pointing_device_send(); + return false; + } + + case KC_MY_SCR: + if (record->event.pressed) { + state = SCROLLING; + } else { + enable_click_layer(); // スクロールキーを離した時に再度クリックレイヤーを有効にする。 Enable click layer again when the scroll key is released. + } + return false; + + case KC_TO_CLICKABLE_INC: + if (record->event.pressed) { + user_config.to_clickable_movement += 5; // user_config.to_clickable_time += 10; + eeconfig_update_kb(user_config.raw); + } + return false; + + case KC_TO_CLICKABLE_DEC: + if (record->event.pressed) { + + user_config.to_clickable_movement -= 5; // user_config.to_clickable_time -= 10; + + if (user_config.to_clickable_movement < 5) + { + user_config.to_clickable_movement = 5; + } + + // if (user_config.to_clickable_time < 10) { + // user_config.to_clickable_time = 10; + // } + + eeconfig_update_kb(user_config.raw); + } + return false; + + case KC_SCROLL_DIR_V: + if (record->event.pressed) { + set_mouse_scroll_v_reverse(!get_mouse_scroll_v_reverse()); // user_config.mouse_scroll_v_reverse = !user_config.mouse_scroll_v_reverse; + eeconfig_update_kb(user_config.raw); + } + return false; + + case KC_SCROLL_DIR_H: + if (record->event.pressed) { + set_mouse_scroll_h_reverse(!get_mouse_scroll_h_reverse()); // user_config.mouse_scroll_h_reverse = !user_config.mouse_scroll_h_reverse; + eeconfig_update_kb(user_config.raw); + } + return false; + + case KC_OLED: + if (record->event.pressed) { + set_is_oled_logo(!get_is_oled_logo()); + eeconfig_update_kb(user_config.raw); + } + break; + + case KC_JS_INC: + if (record->event.pressed) { + joystick_ratio = joystick_ratio + 10; + user_config.joystick_ratio = joystick_ratio; + eeconfig_update_kb(user_config.raw); + } + + break; + + case KC_JS_DEC: + if (record->event.pressed) { + joystick_ratio = joystick_ratio - 10; + user_config.joystick_ratio = joystick_ratio; + eeconfig_update_kb(user_config.raw); + } + + break; + + default: + if (record->event.pressed) { + + if (state == CLICKING || state == SCROLLING) + { + enable_click_layer(); + return false; + } + + for (int i = 0; i < sizeof(ignore_disable_mouse_layer_keys) / sizeof(ignore_disable_mouse_layer_keys[0]); i++) + { + if (keycode == ignore_disable_mouse_layer_keys[i]) + { + enable_click_layer(); + return true; + } + } + + disable_click_layer(); + } + } + + return process_record_user(keycode, record); +} + + +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + int8_t current_x = mouse_report.x; + int8_t current_y = mouse_report.y; + int8_t current_h = 0; + int8_t current_v = 0; + + if (current_x != 0 || current_y != 0) { + + switch (state) { + case CLICKABLE: + click_timer = timer_read(); + break; + + case CLICKING: + after_click_lock_movement -= my_abs(current_x) + my_abs(current_y); + + if (after_click_lock_movement > 0) { + current_x = 0; + current_y = 0; + } + + break; + + case SCROLLING: + { + int8_t rep_v = 0; + int8_t rep_h = 0; + + // 垂直スクロールの方の感度を高める。 Increase sensitivity toward vertical scrolling. + if (my_abs(current_y) * 2 > my_abs(current_x)) { + + scroll_v_mouse_interval_counter += current_y; + while (my_abs(scroll_v_mouse_interval_counter) > scroll_v_threshold) { + if (scroll_v_mouse_interval_counter < 0) { + scroll_v_mouse_interval_counter += scroll_v_threshold; + rep_v += scroll_v_threshold; + } else { + scroll_v_mouse_interval_counter -= scroll_v_threshold; + rep_v -= scroll_v_threshold; + } + + } + } else { + + scroll_h_mouse_interval_counter += current_x; + + while (my_abs(scroll_h_mouse_interval_counter) > scroll_h_threshold) { + if (scroll_h_mouse_interval_counter < 0) { + scroll_h_mouse_interval_counter += scroll_h_threshold; + rep_h += scroll_h_threshold; + } else { + scroll_h_mouse_interval_counter -= scroll_h_threshold; + rep_h -= scroll_h_threshold; + } + } + } + + current_h = rep_h / scroll_h_threshold * (get_mouse_scroll_h_reverse() ? -1 : 1); + current_v = -rep_v / scroll_v_threshold * (get_mouse_scroll_v_reverse() ? -1 : 1); + current_x = 0; + current_y = 0; + } + break; + + case WAITING: + /* + if (timer_elapsed(click_timer) > user_config.to_clickable_time) { + enable_click_layer(); + } + */ + + mouse_movement += my_abs(current_x) + my_abs(current_y); + + if (mouse_movement >= user_config.to_clickable_movement) + { + mouse_movement = 0; + enable_click_layer(); + } + break; + + default: + click_timer = timer_read(); + state = WAITING; + mouse_movement = 0; + } + } + else + { + switch (state) { + case CLICKING: + case SCROLLING: + + break; + + case CLICKABLE: + if (timer_elapsed(click_timer) > to_reset_time) { + disable_click_layer(); + } + break; + + case WAITING: + if (timer_elapsed(click_timer) > 50) { + mouse_movement = 0; + state = NONE; + } + break; + + default: + mouse_movement = 0; + state = NONE; + } + } + + mouse_report.x = current_x; + mouse_report.y = current_y; + mouse_report.h = current_h; + mouse_report.v = current_v; + + return mouse_report; +} + +///////////////////////////// +/// miniZoneの実装 ここまで /// +//////////////////////////// \ No newline at end of file diff --git a/keyboards/takashicompany/left_slinger/left_slinger.h b/keyboards/takashicompany/left_slinger/left_slinger.h new file mode 100644 index 00000000000..130d57ca228 --- /dev/null +++ b/keyboards/takashicompany/left_slinger/left_slinger.h @@ -0,0 +1,17 @@ +#pragma once + +#include "quantum.h" + +enum custom_keycodes_kb { + KC_MY_BTN1 = SAFE_RANGE, + KC_MY_BTN2, + KC_MY_BTN3, + KC_MY_SCR, + KC_TO_CLICKABLE_INC, + KC_TO_CLICKABLE_DEC, + KC_SCROLL_DIR_V, + KC_SCROLL_DIR_H, + KC_OLED, + KC_JS_INC, + KC_JS_DEC +}; \ No newline at end of file