mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-27 05:36:52 +00:00
Merge pull request #1204 from nooges/lets-split-fixes
Let's split fixes
This commit is contained in:
Jack Humbert
GitHub
commit
3ac9259742
@ -27,19 +27,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define TAPPING_FORCE_HOLD
|
||||
#define TAPPING_TERM 100
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 6
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef SUBPROJECT_rev1
|
||||
#include "../../rev1/config.h"
|
||||
#endif
|
||||
#ifdef SUBPROJECT_rev2
|
||||
#include "../../rev2/config.h"
|
||||
#endif
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 6
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
@ -6,6 +6,9 @@
|
||||
#ifdef AUDIO_ENABLE
|
||||
#include "audio.h"
|
||||
#endif
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
|
||||
@ -20,51 +20,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
#define TAPPING_TERM 150
|
||||
|
||||
#ifdef SUBPROJECT_rev1
|
||||
#include "../../rev1/config.h"
|
||||
#endif
|
||||
#ifdef SUBPROJECT_rev2
|
||||
#include "../../rev2/config.h"
|
||||
#endif
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 8
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#ifdef SUBPROJECT_rev1
|
||||
#include "../../rev1/config.h"
|
||||
#define COMPACT_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
|
||||
k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
|
||||
k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
|
||||
k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \
|
||||
{ KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \
|
||||
{ KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \
|
||||
{ KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \
|
||||
{ KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \
|
||||
{ KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \
|
||||
{ KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \
|
||||
{ KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \
|
||||
}
|
||||
#endif
|
||||
#ifdef SUBPROJECT_rev2
|
||||
#include "../../rev2/config.h"
|
||||
#define COMPACT_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
|
||||
k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \
|
||||
k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \
|
||||
k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \
|
||||
{ KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \
|
||||
{ KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \
|
||||
{ KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \
|
||||
{ KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \
|
||||
{ KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \
|
||||
{ KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \
|
||||
{ KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \
|
||||
}
|
||||
#endif
|
||||
#ifdef SUBPROJECT_rev2fliphalf
|
||||
#include "../../rev2fliphalf/config.h"
|
||||
#endif
|
||||
|
||||
@ -39,7 +39,7 @@ enum custom_keycodes {
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = COMPACT_KEYMAP(
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_COLEMAK] = COMPACT_KEYMAP(
|
||||
[_COLEMAK] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_DVORAK] = COMPACT_KEYMAP(
|
||||
[_DVORAK] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = COMPACT_KEYMAP(
|
||||
[_LOWER] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = COMPACT_KEYMAP(
|
||||
[_RAISE] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN3] = COMPACT_KEYMAP(
|
||||
[_FN3] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
|
||||
@ -11,6 +11,20 @@
|
||||
#include "rev2fliphalf.h"
|
||||
#endif
|
||||
|
||||
// Used to create a keymap using only KC_ prefixed keys
|
||||
#define KC_KEYMAP( \
|
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
KEYMAP( \
|
||||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
|
||||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
|
||||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
|
||||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
|
||||
)
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#endif
|
||||
@ -7,6 +7,12 @@ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
|
||||
based boards.
|
||||
|
||||
|
||||
## Build Guide
|
||||
|
||||
A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
|
||||
|
||||
There is additional information there about flashing and adding RGB underglow.
|
||||
|
||||
## First Time Setup
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using:
|
||||
@ -62,8 +68,7 @@ Apart from diodes and key switches for the keyboard matrix in each half, you
|
||||
will need:
|
||||
|
||||
* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each.
|
||||
* 2 TRS sockets
|
||||
* 1 TRS cable.
|
||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
|
||||
|
||||
Alternatively, you can use any sort of cable and socket that has at least 3
|
||||
wires. If you want to use I2C to communicate between halves, you will need a
|
||||
@ -77,7 +82,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t
|
||||
Wiring
|
||||
------
|
||||
|
||||
The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
||||
PD0 on the ATmega32u4) between the two Pro Micros.
|
||||
|
||||
Then wire your key matrix to any of the remaining 17 IO pins of the pro micro
|
||||
|
||||
@ -9,20 +9,20 @@
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
|
||||
k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
|
||||
k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
|
||||
k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
|
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05 }, \
|
||||
{ k10, k11, k12, k13, k14, k15 }, \
|
||||
{ k20, k21, k22, k23, k24, k25 }, \
|
||||
{ k30, k31, k32, k33, k34, k35 }, \
|
||||
{ k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k50, k51, k52, k53, k54, k55 }, \
|
||||
{ k60, k61, k62, k63, k64, k65 }, \
|
||||
{ k70, k71, k72, k73, k74, k75 } \
|
||||
{ L00, L01, L02, L03, L04, L05 }, \
|
||||
{ L10, L11, L12, L13, L14, L15 }, \
|
||||
{ L20, L21, L22, L23, L24, L25 }, \
|
||||
{ L30, L31, L32, L33, L34, L35 }, \
|
||||
{ R00, R01, R02, R03, R04, R05 }, \
|
||||
{ R10, R11, R12, R13, R14, R15 }, \
|
||||
{ R20, R21, R22, R23, R24, R25 }, \
|
||||
{ R30, R31, R32, R33, R34, R35 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -37,4 +37,3 @@ void shutdown_user(void) {
|
||||
stop_all_notes();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@ -10,62 +10,51 @@
|
||||
#ifdef USE_I2C
|
||||
#include <stddef.h>
|
||||
#ifdef __AVR__
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#endif
|
||||
#ifdef SSD1306OLED
|
||||
extern bool iota_gfx_init(void);
|
||||
extern void iota_gfx_task(void);
|
||||
extern bool iota_gfx_off(void);
|
||||
extern bool iota_gfx_on(void);
|
||||
extern void iota_gfx_flush(void);
|
||||
extern void iota_gfx_write_char(uint8_t c);
|
||||
extern void iota_gfx_write(const char *data);
|
||||
extern void iota_gfx_write_P(const char *data);
|
||||
extern void iota_gfx_clear_screen(void);
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
|
||||
#ifndef FLIP_HALF
|
||||
//Standard Keymap
|
||||
// Standard Keymap
|
||||
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
|
||||
#define KEYMAP( \
|
||||
k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \
|
||||
k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \
|
||||
k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \
|
||||
k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \
|
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
{ \
|
||||
{ k45, k44, k43, k42, k41, k40 }, \
|
||||
{ k55, k54, k53, k52, k51, k50 }, \
|
||||
{ k65, k64, k63, k62, k61, k60 }, \
|
||||
{ k75, k74, k73, k72, k71, k70 }, \
|
||||
{ k00, k01, k02, k03, k04, k05 }, \
|
||||
{ k10, k11, k12, k13, k14, k15 }, \
|
||||
{ k20, k21, k22, k23, k24, k25 }, \
|
||||
{ k30, k31, k32, k33, k34, k35 } \
|
||||
{ L00, L01, L02, L03, L04, L05 }, \
|
||||
{ L10, L11, L12, L13, L14, L15 }, \
|
||||
{ L20, L21, L22, L23, L24, L25 }, \
|
||||
{ L30, L31, L32, L33, L34, L35 }, \
|
||||
{ R05, R04, R03, R02, R01, R00 }, \
|
||||
{ R15, R14, R13, R12, R11, R10 }, \
|
||||
{ R25, R24, R23, R22, R21, R20 }, \
|
||||
{ R35, R34, R33, R32, R31, R30 } \
|
||||
}
|
||||
|
||||
#else
|
||||
// Keymap with one side flipped
|
||||
// Keymap with right side flipped
|
||||
// (TRRS jack on both halves are to the right)
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
|
||||
k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
|
||||
k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
|
||||
k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
|
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05 }, \
|
||||
{ k10, k11, k12, k13, k14, k15 }, \
|
||||
{ k20, k21, k22, k23, k24, k25 }, \
|
||||
{ k30, k31, k32, k33, k34, k35 }, \
|
||||
{ k45, k44, k43, k42, k41, k40 }, \
|
||||
{ k55, k54, k53, k52, k51, k50 }, \
|
||||
{ k65, k64, k63, k62, k61, k60 }, \
|
||||
{ k75, k74, k73, k72, k71, k70 } \
|
||||
{ L00, L01, L02, L03, L04, L05 }, \
|
||||
{ L10, L11, L12, L13, L14, L15 }, \
|
||||
{ L20, L21, L22, L23, L24, L25 }, \
|
||||
{ L30, L31, L32, L33, L34, L35 }, \
|
||||
{ R00, R01, R02, R03, R04, R05 }, \
|
||||
{ R10, R11, R12, R13, R14, R15 }, \
|
||||
{ R20, R21, R22, R23, R24, R25 }, \
|
||||
{ R30, R31, R32, R33, R34, R35 } \
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif
|
||||
@ -1,7 +1,7 @@
|
||||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
split_util.c \
|
||||
serial.c\
|
||||
serial.c \
|
||||
ssd1306.c
|
||||
|
||||
# MCU name
|
||||
@ -74,3 +74,15 @@ USE_I2C ?= yes
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
|
||||
avrdude: build
|
||||
ls /dev/tty* > /tmp/1; \
|
||||
echo "Reset your Pro Micro now"; \
|
||||
while [[ -z $$USB ]]; do \
|
||||
sleep 1; \
|
||||
ls /dev/tty* > /tmp/2; \
|
||||
USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
|
||||
done; \
|
||||
avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
|
||||
|
||||
.PHONY: avrdude
|
||||
|
||||
@ -21,7 +21,7 @@ static void setup_handedness(void) {
|
||||
#ifdef EE_HANDS
|
||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
|
||||
#else
|
||||
// I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c:
|
||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
|
||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
|
||||
isLeftHand = !has_usb();
|
||||
#else
|
||||
|
||||
@ -1,8 +1,7 @@
|
||||
#include "ssd1306.h"
|
||||
#include "config.h"
|
||||
#include "i2c.h"
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include "print.h"
|
||||
#include "lets_split.h"
|
||||
#include "common/glcdfont.c"
|
||||
|
||||
17
keyboards/lets_split/ssd1306.h
Normal file
17
keyboards/lets_split/ssd1306.h
Normal file
@ -0,0 +1,17 @@
|
||||
#ifndef SSD1306_H
|
||||
#define SSD1306_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
|
||||
bool iota_gfx_init(void);
|
||||
void iota_gfx_task(void);
|
||||
bool iota_gfx_off(void);
|
||||
bool iota_gfx_on(void);
|
||||
void iota_gfx_flush(void);
|
||||
void iota_gfx_write_char(uint8_t c);
|
||||
void iota_gfx_write(const char *data);
|
||||
void iota_gfx_write_P(const char *data);
|
||||
void iota_gfx_clear_screen(void);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user