diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h
new file mode 100644
index 00000000000..ff6697623b5
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/config.h
@@ -0,0 +1,151 @@
+/*
+Copyright 2021 takashicompany
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x7463 // tc = takashicompany
+#define PRODUCT_ID 0x0006
+#define DEVICE_VER 0x0001
+#define MANUFACTURER takashicompany
+#define PRODUCT EndZone34
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B3, B2, B6, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D4, C6, D7, E6, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 9
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/endzone34/endzone34.c b/keyboards/takashicompany/endzone34/endzone34.c
new file mode 100644
index 00000000000..5b314905470
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/endzone34.c
@@ -0,0 +1,17 @@
+/* Copyright 2021 takashicompany
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "endzone34.h"
diff --git a/keyboards/takashicompany/endzone34/endzone34.h b/keyboards/takashicompany/endzone34/endzone34.h
new file mode 100644
index 00000000000..f3e5c88b635
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/endzone34.h
@@ -0,0 +1,39 @@
+/* Copyright 2021 takashicompany
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, \
+ k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, \
+ k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, \
+ k31, k32, k33, k34 \
+) { \
+ { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10 }, \
+ { k11, k12, k13, k14, k15, k16, k17, k18, k19, k20 }, \
+ { k21, k22, k23, k24, k25, k26, k27, k28, k29, k30 }, \
+ { KC_NO, KC_NO, KC_NO, k31, k32, k33, k34, KC_NO, KC_NO, KC_NO } \
+}
diff --git a/keyboards/takashicompany/endzone34/info.json b/keyboards/takashicompany/endzone34/info.json
new file mode 100644
index 00000000000..41fcc133110
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/info.json
@@ -0,0 +1,183 @@
+{
+ "keyboard_name": "EndZone34",
+ "url": "https://github.com/takashicompany/endzone34",
+ "maintainer": "takashicompany",
+ "width": 12,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {
+ "label": "W",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "E",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "R",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "T",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "Y",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "U",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "I",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": "O",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "Q",
+ "x": 0,
+ "y": 0.5
+ },
+ {
+ "label": "P",
+ "x": 11,
+ "y": 0.5
+ },
+ {
+ "label": "S",
+ "x": 1,
+ "y": 1
+ },
+ {
+ "label": "D",
+ "x": 2,
+ "y": 1
+ },
+ {
+ "label": "F",
+ "x": 3,
+ "y": 1
+ },
+ {
+ "label": "G",
+ "x": 4,
+ "y": 1
+ },
+ {
+ "label": "H",
+ "x": 7,
+ "y": 1
+ },
+ {
+ "label": "J",
+ "x": 8,
+ "y": 1
+ },
+ {
+ "label": "K",
+ "x": 9,
+ "y": 1
+ },
+ {
+ "label": "L",
+ "x": 10,
+ "y": 1
+ },
+ {
+ "label": "A",
+ "x": 0,
+ "y": 1.5
+ },
+ {
+ "label": "Enter",
+ "x": 11,
+ "y": 1.5
+ },
+ {
+ "label": "X",
+ "x": 1,
+ "y": 2
+ },
+ {
+ "label": "C",
+ "x": 2,
+ "y": 2
+ },
+ {
+ "label": "V",
+ "x": 3,
+ "y": 2
+ },
+ {
+ "label": "B",
+ "x": 4,
+ "y": 2
+ },
+ {
+ "label": "N",
+ "x": 7,
+ "y": 2
+ },
+ {
+ "label": "M",
+ "x": 8,
+ "y": 2
+ },
+ {
+ "label": ",",
+ "x": 9,
+ "y": 2
+ },
+ {
+ "label": ".",
+ "x": 10,
+ "y": 2
+ },
+ {
+ "label": "Z",
+ "x": 0,
+ "y": 2.5
+ },
+ {
+ "label": "Back Space",
+ "x": 11,
+ "y": 2.5
+ },
+ {
+ "label": "⇓",
+ "x": 4,
+ "y": 3
+ },
+ {
+ "label": "Tab",
+ "x": 5,
+ "y": 3
+ },
+ {
+ "label": "Space",
+ "x": 6,
+ "y": 3
+ },
+ {
+ "label": "⇑",
+ "x": 7,
+ "y": 3
+ }
+ ]
+ }
+ }
+}
\ No newline at end of file
diff --git a/keyboards/takashicompany/endzone34/keymaps/default/keymap.c b/keyboards/takashicompany/endzone34/keymaps/default/keymap.c
new file mode 100644
index 00000000000..7317ab47784
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/keymaps/default/keymap.c
@@ -0,0 +1,112 @@
+/* Copyright 2021 takashicompany
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT(
+ LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT,
+ SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC,
+ ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1)),
+
+ LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+ CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN,
+ KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT(
+ KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO,
+ KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,
+ KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT(
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
+ RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+ RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ return OLED_ROTATION_270;
+}
+
+//Variable that stores the number of times the key was pressed
+static uint16_t press_count = 0;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+
+ // Increment the counter when a key is pressed
+ if (record->event.pressed) {
+ press_count++;
+ }
+
+ return true;
+}
+
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_logo(void) {
+
+ static const char PROGMEM my_logo[] = {
+ 0x00, 0x00, 0x00, 0xff, 0x01, 0x01, 0x39, 0x29, 0x29, 0x29, 0x29, 0x29, 0xe9, 0x0f, 0x00, 0x00,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00,
+ 0x80, 0x80, 0x80, 0xbf, 0xa0, 0xa0, 0xa7, 0xa5, 0xa5, 0xa5, 0xa5, 0x25, 0x25, 0x3c, 0x00, 0x1f,
+ 0x20, 0x3e, 0x02, 0x3e, 0x20, 0x1f, 0x20, 0x2e, 0x2a, 0x2e, 0x20, 0x1f, 0x00, 0x00, 0x00, 0x00,
+ 0x87, 0x44, 0x24, 0x14, 0x0c, 0x00, 0xc0, 0xa0, 0x90, 0x88, 0x87, 0x00, 0xe0, 0x10, 0xd0, 0x50,
+ 0xd0, 0x10, 0xe0, 0x10, 0xd0, 0x50, 0xd0, 0x10, 0xe0, 0x10, 0xd0, 0x50, 0x50, 0x10, 0xf0, 0x00,
+ 0x07, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x07, 0x00, 0x03, 0x04, 0x05, 0x05,
+ 0x05, 0x04, 0x03, 0x04, 0x07, 0x00, 0x07, 0x04, 0x03, 0x04, 0x05, 0x05, 0x05, 0x05, 0x07, 0x00
+ };
+
+ oled_write_raw_P(my_logo, sizeof(my_logo));
+}
+
+void oled_task_user(void) {
+
+ render_logo();
+
+ oled_set_cursor(0, 5);
+
+ oled_write_ln_P(PSTR("Layer"), false);
+ uint8_t n = get_highest_layer(layer_state);
+ char layer_str[4];
+ layer_str[3] = '\0';
+ layer_str[2] = '0' + n % 10;
+ layer_str[1] = (n /= 10) % 10 ? '0' + (n) % 10 : (n / 10) % 10 ? '0' : ' ';
+ layer_str[0] = n / 10 ? '0' + n / 10 : ' ';
+
+ oled_write_ln(layer_str, false);
+
+ oled_write_ln_P(PSTR(" "), false);
+ oled_write_ln_P(PSTR(" "), false);
+
+ oled_write_ln_P(PSTR("Count"), false);
+ uint16_t m = press_count;
+ char count_str[6];
+ count_str[5] = '\0';
+ count_str[4] = '0' + m % 10;
+ count_str[3] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ count_str[2] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ count_str[1] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ count_str[0] = m / 10 ? '0' + m / 10 : ' ';
+
+ oled_write_ln(count_str, false);
+
+}
+#endif
diff --git a/keyboards/takashicompany/endzone34/keymaps/via/keymap.c b/keyboards/takashicompany/endzone34/keymaps/via/keymap.c
new file mode 100644
index 00000000000..5dbc4e13cf4
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/keymaps/via/keymap.c
@@ -0,0 +1,43 @@
+/* Copyright 2021 takashicompany
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT(
+ LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT,
+ SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC,
+ ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1)),
+
+ LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+ CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN,
+ KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT(
+ KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO,
+ KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,
+ KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT(
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
+ RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+ RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};
diff --git a/keyboards/takashicompany/endzone34/keymaps/via/rules.mk b/keyboards/takashicompany/endzone34/keymaps/via/rules.mk
new file mode 100644
index 00000000000..036bd6d1c3e
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/takashicompany/endzone34/readme.md b/keyboards/takashicompany/endzone34/readme.md
new file mode 100644
index 00000000000..c4844f7f683
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/readme.md
@@ -0,0 +1,20 @@
+# EndZone34
+
+
+
+A simple yet fun to use 30% keyboard.
+Also supports MX sockets and OLED.
+
+* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
+* Hardware Supported: EndZone34 PCB, Pro Micro
+* Hardware Availability: https://github.com/takashicompany/endzone34
+
+Make example for this keyboard (after setting up your build environment):
+
+ make takashicompany/endzone34:default
+
+Flashing example for this keyboard:
+
+ make takashicompany/endzone34:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/takashicompany/endzone34/rules.mk b/keyboards/takashicompany/endzone34/rules.mk
new file mode 100644
index 00000000000..9a413053690
--- /dev/null
+++ b/keyboards/takashicompany/endzone34/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
+OLED_DRIVER_ENABLE = yes