diff --git a/keyboards/1upkeyboards/1up60hse/1up60hse.c b/keyboards/1upkeyboards/1up60hse/1up60hse.c deleted file mode 100644 index c04018d62c4..00000000000 --- a/keyboards/1upkeyboards/1up60hse/1up60hse.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "1up60hse.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/1upkeyboards/1up60hse/1up60hse.h b/keyboards/1upkeyboards/1up60hse/1up60hse.h deleted file mode 100644 index f1b4f5e43e9..00000000000 --- a/keyboards/1upkeyboards/1up60hse/1up60hse.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments representing the physical -// layout of the board and position of the keys -// The second converts the arguments into a two-dimensional array which -// represents the switch matrix. -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, KC_NO, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, K4D } \ -} diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h deleted file mode 100644 index 3781d7bcf0c..00000000000 --- a/keyboards/1upkeyboards/1up60hse/config.h +++ /dev/null @@ -1,218 +0,0 @@ -/* -Copyright 2018 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 1upkeyboards -#define PRODUCT 1up60hse -#define DESCRIPTION A custom 60% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 } -#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -#define RGB_DI_PIN F0 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/1upkeyboards/1up60hse/info.json b/keyboards/1upkeyboards/1up60hse/info.json deleted file mode 100644 index 831614bc6bc..00000000000 --- a/keyboards/1upkeyboards/1up60hse/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "1up60hse", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - } - } -} diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/default/config.h b/keyboards/1upkeyboards/1up60hse/keymaps/default/config.h deleted file mode 100644 index 99a70056070..00000000000 --- a/keyboards/1upkeyboards/1up60hse/keymaps/default/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2018 MechMerlin - * Copyright 2018 Logan Huskins - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c deleted file mode 100644 index 39473f60673..00000000000 --- a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 MechMerlin - * Copyright 2018 Logan Huskins - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL - ), - - [1] = LAYOUT_60_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, - KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS - ), - - [2] = LAYOUT_60_ansi( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md b/keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md deleted file mode 100644 index a7041f37b2a..00000000000 --- a/keyboards/1upkeyboards/1up60hse/keymaps/default/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# 1up60hse default keymap generated by QMK Configurator - -This is the keymap used by [QMK Configurator](https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi) as default. - diff --git a/keyboards/1upkeyboards/1up60hse/readme.md b/keyboards/1upkeyboards/1up60hse/readme.md deleted file mode 100644 index 2865768b60d..00000000000 --- a/keyboards/1upkeyboards/1up60hse/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# 1up60hse (hot swap edition) - -![1up60hse](https://i2.wp.com/www.1upkeyboards.com/wp-content/uploads/2018/08/PCB-1up-60-hotswap-group-RGB.jpg?fit=1280%2C1280&ssl=1) - -A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a standard ANSI layout. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: 1up60hse 60% PCB. -Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-pcb-hse/) - -Make example for this keyboard (after setting up your build environment): - - make 1upkeyboards/1up60hse:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk deleted file mode 100644 index 72e6849e04f..00000000000 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ /dev/null @@ -1,73 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -EXTRAFLAGS += -flto - -LAYOUTS = 60_ansi diff --git a/keyboards/1upkeyboards/1up60hte/1up60hte.c b/keyboards/1upkeyboards/1up60hte/1up60hte.c deleted file mode 100644 index 460e42a0e57..00000000000 --- a/keyboards/1upkeyboards/1up60hte/1up60hte.c +++ /dev/null @@ -1,18 +0,0 @@ -/* -Copyright 2019 Bubnick - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "1up60hte.h" diff --git a/keyboards/1upkeyboards/1up60hte/1up60hte.h b/keyboards/1upkeyboards/1up60hte/1up60hte.h deleted file mode 100644 index b6d3c8e0d15..00000000000 --- a/keyboards/1upkeyboards/1up60hte/1up60hte.h +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2019 Bubnick - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - -#define LAYOUT_tsangan( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ - K400, K401, K402, K406, K410, K411, K412 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO }, \ - { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413 } \ -} - -/* HHKB Variant */ -#define LAYOUT_60_hhkb( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ - K401, K402, K406, K410, K411 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO }, \ - { KC_NO, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413 } \ -} diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h deleted file mode 100644 index bcf6329f765..00000000000 --- a/keyboards/1upkeyboards/1up60hte/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -Copyright 2019 Bubnick - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 1upkeyboards -#define PRODUCT 1up60hte -#define DESCRIPTION A custom 60% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 } -#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN F0 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/1upkeyboards/1up60hte/info.json b/keyboards/1upkeyboards/1up60hte/info.json deleted file mode 100644 index 86521d36bd3..00000000000 --- a/keyboards/1upkeyboards/1up60hte/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "1up60hte", - "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/", - "maintainer": "1upkeyboards", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_tsangan": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - "LAYOUT_60_hhkb": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c deleted file mode 100644 index 359ac754063..00000000000 --- a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c +++ /dev/null @@ -1,52 +0,0 @@ -/* -Copyright 2019 Bubnick - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tsangan( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), - - [1] = LAYOUT_tsangan( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_CLR, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) -}; - -void matrix_init_user(void) { - setPinOutput(B6); -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } -} diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c deleted file mode 100644 index 5312e3b6752..00000000000 --- a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c +++ /dev/null @@ -1,52 +0,0 @@ -/* -Copyright 2019 Bubnick - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tsangan( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_NO, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_NO), - - [1] = LAYOUT_tsangan( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_CLR, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) -}; - -void matrix_init_user(void) { - setPinOutput(B6); -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } -} diff --git a/keyboards/1upkeyboards/1up60hte/readme.md b/keyboards/1upkeyboards/1up60hte/readme.md deleted file mode 100644 index 93767c541f3..00000000000 --- a/keyboards/1upkeyboards/1up60hte/readme.md +++ /dev/null @@ -1,18 +0,0 @@ - -# 1up60hte (Hot Swap Tsangan Edition) - -![1up60hte](https://www.1upkeyboards.com/wp-content/uploads/2019/01/PCB-60-HS-TSA-both.jpg) - - -A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Tsangan layout. - -Keyboard Maintainer: [Bubnick](https://github.com/bubnick) -Hardware Supported: 1up60hte 60% PCB - -Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/) - -Make example for this keyboard (after setting up your build environment): - - make 1upkeyboards/1up60hte:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/1upkeyboards/1up60hte/rules.mk b/keyboards/1upkeyboards/1up60hte/rules.mk deleted file mode 100644 index 860a754a643..00000000000 --- a/keyboards/1upkeyboards/1up60hte/rules.mk +++ /dev/null @@ -1,59 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes -EXTRAFLAGS += -flto - -LAYOUTS = 60_hhkb diff --git a/keyboards/1upkeyboards/1up60rgb/1up60rgb.c b/keyboards/1upkeyboards/1up60rgb/1up60rgb.c deleted file mode 100644 index 4ba631c7978..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/1up60rgb.c +++ /dev/null @@ -1 +0,0 @@ -#include "1up60rgb.h" diff --git a/keyboards/1upkeyboards/1up60rgb/1up60rgb.h b/keyboards/1upkeyboards/1up60rgb/1up60rgb.h deleted file mode 100644 index 0f6818a6d86..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/1up60rgb.h +++ /dev/null @@ -1,78 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} - - -/* ANSI variant. No extra keys for ISO */ -#define LAYOUT_60_ansi( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \ - K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, KC_NO,\ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) - -/* ISO variant. Remove useless ANSI keys */ -#define LAYOUT_60_iso( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, KC_NO,\ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) - -/* HHKB Variant */ -#define LAYOUT_60_ansi_split_bs_rshift( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \ - K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314,\ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) - -/* HHKB Variant */ -#define LAYOUT_60_hhkb( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K401, K403, K406, K411, K413 \ -) LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \ - K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - KC_NO,K401, K403, K406, KC_NO,K411, K413, KC_NO \ -) diff --git a/keyboards/1upkeyboards/1up60rgb/config.h b/keyboards/1upkeyboards/1up60rgb/config.h deleted file mode 100644 index 6cf5b690458..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/config.h +++ /dev/null @@ -1,47 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 1upkeyboards -#define PRODUCT 1UP RGB Underglow PCB -#define DESCRIPTION 60% keyboard with RGB underglow - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B6 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 5 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/1upkeyboards/1up60rgb/info.json b/keyboards/1upkeyboards/1up60rgb/info.json deleted file mode 100644 index 67f94b7fe15..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/info.json +++ /dev/null @@ -1,27 +0,0 @@ -{ - "keyboard_name": "1up60rgb", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi": { - "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}] - }, - - "LAYOUT_60_iso": { - "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi_split_bs_rshift": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - "LAYOUT_60_hhkb": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c deleted file mode 100644 index 8567b780a75..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c +++ /dev/null @@ -1,72 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - - LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c deleted file mode 100644 index 42fcb6cf9bb..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c +++ /dev/null @@ -1,72 +0,0 @@ -#include "1up60rgb.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - - LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/mdyevimnav/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/mdyevimnav/keymap.c deleted file mode 100644 index bb0d10405cd..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/mdyevimnav/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* - * Layer 0 - * ,-----------------------------------------------------------------------------------------. - * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | - * |-----------------------------------------------------------------------------------------+ - * | Esc | a | s | d | f | g | h | j | k | l | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | z | x | c | v | b | n | m | , | . | / | Shift | - * |-----------------------------------------------------------------------------------------+ - * | Ctrl | L1 | Alt | space | Alt | Sup | L1 | Ctrl | - * \-----------------------------------------------------------------------------------------/ - * - */ - LAYOUT_all( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSHIFT, KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSHIFT, KC_RSHIFT, - KC_LCTL, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - -/* - * Layer 1 - * ,-----------------------------------------------------------------------------------------. - * | | f1 | f2 | f3 | f4 | f5 | f6 | f7 | f8 | f9 | f10 | f11 | f12 | Del | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | Ins | | Paus| | | Prnt | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | L | D | U | R | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | Hom | PDn | PUp | End | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | - * \-----------------------------------------------------------------------------------------/ - * - */ - LAYOUT_all( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PAUS, KC_TRNS, KC_TRNS, KC_PSCR, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) -}; diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c deleted file mode 100644 index f4dd36d6dc5..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c +++ /dev/null @@ -1,130 +0,0 @@ -//****************************************************************************// -// raffle's keymap for the 1up60rgb. // -// emulates my pok3r layout and adds RGB control + firmware reset/debug // -// layers // -//****************************************************************************// - -//************************ dependencies + definitions ************************// -#include QMK_KEYBOARD_H - -// create names for layers -enum layers { - _typing, - _raise, - _rgb, - _adjust -}; - -// define layer mods -#define RAISE MO(_raise) -#define RGB MO(_rgb) - -// define mod masks for making multi-key macros -#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) -#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTRL)) -#define MODS_ALT_MASK (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) - -//********************************** Layers **********************************// -// define layers -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // typing layer to handle basic typing - [_typing] = LAYOUT_all - ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, - RAISE, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, RGB, KC_RCTL - ), - // raise layer to handle function & nav keys - [_raise] = LAYOUT_all - ( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, - KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_LSCR, KC_PAUSE, KC_TRNS, - KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, KC_DEL, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - // rgb layer for pretty backlight colors - [_rgb] = LAYOUT_all - ( - RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, RGB_VAI, RGB_HUD, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_SAI, RGB_VAD,RGB_SAD, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO - ), - // adjust to handle firmware debug + reset mode - [_adjust] = LAYOUT_all - ( - RESET, DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO - ) -}; - -//***************************** Function bodies *****************************// -// enable tri-layer state for _raise + _rgb = _adjust -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _raise, _rgb, _adjust); -} - - -// scan matrix -void matrix_scan_user(void) { -} - -// support for standard mod state keys (caps lock, scroll lock, etc.) -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - -//*********** Empty fxns from default map that I'm not modifying ***********// -// onboard macro support -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - -// initialize matrix -void matrix_init_user(void) { -} - - - diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/readme.md b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/readme.md deleted file mode 100644 index c462c206ace..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/readme.md +++ /dev/null @@ -1,43 +0,0 @@ -## raffle's keymap -The default keymap is just enough to get started. This keymap adds a pok3r-like -raise layer, backlight RGB control layer, and firmware reset/debug adjust layer -for ANSI layouts. - -In the default layer, the following modifications are made (using standard ANSI -keys for LHS): - -- `CAPS` = `LCTRL` -- `LCTRL` = `RAISE` -- `APP` = `RGB` -- `LCTRL` + `APP` (`RAISE` + `RGB`) = `ADJUST` -- `GRV` = `ESC` - -Additionally, the pok3r's `SHIFT` + `ESC` for `~` is maintained (with either `SHIFT`). - -### Raise Layer -Emulates standard pok3r layout (without the onboard macro keys) - -Highlights: - -- `IJKL` for arrow keys -- `H`/`N` for `HOME`/`END` -- `U`/`P` for `PGUP`/`PGDN` -- `1` - `=` for `F1` - `F12` -- `Y` for calculator - -Other standard keys from the pok3r layout are carried over. See the keymap or -the pok3r documentation for details. - -### RGB Layer -Uses navigation keys from `RAISE` layer for RGB adjustment - -- `I`/`K` for Value (brightness) Increase/Decrease -- `U`/`P` for Hue (color) Increase/Decrease -- `H`/`N` for Saturation Incrase/Decrease -- `GRV` to toggle RGB on/off -- `1`-`9` to activate QMK's predefined RGB animations - -### Adjust Layer - -- `GRV` activates firmware reset for flashing -- `1` enters debug mode diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c deleted file mode 100644 index 485010eef10..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c +++ /dev/null @@ -1,72 +0,0 @@ -#include "1up60rgb.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL), - - LAYOUT_all( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, - KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/1upkeyboards/1up60rgb/readme.md b/keyboards/1upkeyboards/1up60rgb/readme.md deleted file mode 100644 index ad733f6b5e5..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# 1up60rgb 60% RGB - -Firmware for custom keyboard PCB with 60% key layout. - -Keyboard Maintainer: [rempired](https://github.com/rempired) -Hardware Supported: 1upkeyboards 60% RGB -Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/1up-rgb-underglow-pcb/) - -Make example for this keyboard (after setting up your build environment): - - make 1upkeyboards/1up60rgb:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/1upkeyboards/1up60rgb/rules.mk b/keyboards/1upkeyboards/1up60rgb/rules.mk deleted file mode 100644 index 8b1cf6667fa..00000000000 --- a/keyboards/1upkeyboards/1up60rgb/rules.mk +++ /dev/null @@ -1,58 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes - -LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_hhkb diff --git a/keyboards/1upkeyboards/readme.md b/keyboards/1upkeyboards/readme.md deleted file mode 100644 index de8ae36acb6..00000000000 --- a/keyboards/1upkeyboards/readme.md +++ /dev/null @@ -1,7 +0,0 @@ -# 1UP Keyboards - -1UP Keyboards is an online mechanical keyboard retailer located in New York, USA. - -Website: [1UP Keyboards](https://www.1upkeyboards.com/) -Discord: [Server Invite](https://discordapp.com/invite/c6SYn8) -YouTube: [skiwithpete](https://www.youtube.com/user/skiwithpete) \ No newline at end of file diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h deleted file mode 100644 index a50821637e0..00000000000 --- a/keyboards/1upkeyboards/super16/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2010 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 1upkeyboards -#define PRODUCT super16 -#define DESCRIPTION A 4x4 custom macropad - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D1, D0, F4, F5 } -#define MATRIX_COL_PINS { D4, C6, F6, F7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN D3 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 16 // Add 12 if attaching the RGB LED ring - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ - /*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS - /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - -/* prevent stuck modifiers */ diff --git a/keyboards/1upkeyboards/super16/info.json b/keyboards/1upkeyboards/super16/info.json deleted file mode 100644 index 10f81f4d08b..00000000000 --- a/keyboards/1upkeyboards/super16/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "super16", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - }, - "LAYOUT_numpad_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] - } - } -} diff --git a/keyboards/1upkeyboards/super16/keymaps/default/config.h b/keyboards/1upkeyboards/super16/keymaps/default/config.h deleted file mode 100644 index 26c6d6ade10..00000000000 --- a/keyboards/1upkeyboards/super16/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/1upkeyboards/super16/keymaps/default/keymap.c b/keyboards/1upkeyboards/super16/keymaps/default/keymap.c deleted file mode 100644 index 47889abae57..00000000000 --- a/keyboards/1upkeyboards/super16/keymaps/default/keymap.c +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_4x4( /* Base */ - RGB_TOG, KC_1, KC_U, KC_P, - RGB_MOD, KC_1, KC_U, KC_P, - RGB_TOG, KC_1, KC_U, KC_P, - RGB_MOD, KC_1, KC_U, KC_P - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/1upkeyboards/super16/keymaps/default/readme.md b/keyboards/1upkeyboards/super16/keymaps/default/readme.md deleted file mode 100644 index 814f15c005a..00000000000 --- a/keyboards/1upkeyboards/super16/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for super16 diff --git a/keyboards/1upkeyboards/super16/readme.md b/keyboards/1upkeyboards/super16/readme.md deleted file mode 100644 index 61b92ff85e9..00000000000 --- a/keyboards/1upkeyboards/super16/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Super 16 Macro Pad - -A 4x4 macropad with RGB underglow. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Super 16 Macropad -Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/keyboard-kits/super-16-macro-pad/) - -Make example for this keyboard (after setting up your build environment): - - make 1upkeyboards/super16:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk deleted file mode 100644 index 31042dfb811..00000000000 --- a/keyboards/1upkeyboards/super16/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -#EXTRAFLAGS += -flto - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_4x4 numpad_4x4 diff --git a/keyboards/1upkeyboards/super16/super16.c b/keyboards/1upkeyboards/super16/super16.c deleted file mode 100644 index 72e47f447b1..00000000000 --- a/keyboards/1upkeyboards/super16/super16.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "super16.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/1upkeyboards/super16/super16.h b/keyboards/1upkeyboards/super16/super16.h deleted file mode 100644 index 0595af8dcd6..00000000000 --- a/keyboards/1upkeyboards/super16/super16.h +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 } \ -} - -#define LAYOUT_numpad_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, \ - K20, K21, K22, K23, \ - K31, K32 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, KC_NO }, \ - { K20, K21, K22, K23 }, \ - { KC_NO, K31, K32, KC_NO } \ -} diff --git a/keyboards/1upkeyboards/sweet16/config.h b/keyboards/1upkeyboards/sweet16/config.h deleted file mode 100644 index 23b590c2c1c..00000000000 --- a/keyboards/1upkeyboards/sweet16/config.h +++ /dev/null @@ -1,47 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2010 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 1up Keyboards -#define PRODUCT Sweet16 -#define DESCRIPTION 4x4 grid - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F4, F5, F6, F7 } -#define MATRIX_COL_PINS { D1, D0, D4, C6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ - -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN B1 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 1 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/1upkeyboards/sweet16/info.json b/keyboards/1upkeyboards/sweet16/info.json deleted file mode 100644 index 445a5909ecd..00000000000 --- a/keyboards/1upkeyboards/sweet16/info.json +++ /dev/null @@ -1,16 +0,0 @@ -{ - "keyboard_name": "Sweet 16", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - }, - - "LAYOUT_numpad_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] - } - } -} diff --git a/keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c b/keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c deleted file mode 100644 index 4cc754dc164..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -#include QMK_KEYBOARD_H - -enum custom_keycodes { - UP_URL = SAFE_RANGE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ortho_4x4( - KC_7, KC_8, KC_9, KC_ASTR, - KC_4, KC_5, KC_6, KC_SLSH, - KC_1, KC_2, KC_3, KC_MINS, - KC_0, KC_ENT, KC_DOT, KC_EQL - ) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case UP_URL: - if (record->event.pressed) { - SEND_STRING("http://1upkeyboards.com"); - } - return false; - break; - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - #ifndef CONVERT_TO_PROTON_C - /* Map RXLED to USB_LED_NUM_LOCK */ - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - /* Map TXLED to USB_LED_CAPS_LOCK */ - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - #endif -} diff --git a/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/keymap.c b/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/keymap.c deleted file mode 100644 index b42c34edb74..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include "sweet16.h" - -enum layers { - num, - extra, - mouse -}; - - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [num] = LAYOUT_numpad_4x4( - KC_P7, KC_P8, KC_P9, LT(extra, KC_PPLS), - KC_P4, KC_P5, KC_P6, - KC_P1, KC_P2, KC_P3, KC_PENT, - LT(mouse, KC_P0), KC_DOT - ), - - [extra] = LAYOUT_numpad_4x4( - KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, - KC_BSPC, KC_EXECUTE, KC_DEL, - KC_LPRN, KC_RPRN, KC_PEQL, KC_PENT, - KC_TAB, KC_NLCK - ), - - -[mouse] = LAYOUT_numpad_4x4( - KC_WH_D, KC_MS_U, KC_WH_U, LT(extra, KC_PPLS), - KC_MS_L, KC_MS_D, KC_MS_R, - KC_BTN1, KC_BTN2, KC_BTN3, KC_PENT, - KC_TRNS, KC_DOT - ) - - - - -}; - diff --git a/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/readme.md b/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/readme.md deleted file mode 100644 index aabcf82c611..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/dlaroe/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# Dale's keymap for the Sweet16 - -I wanted to reuse a standard numpad keyset and have the full functionality of an larger numpad with a nod to Excel functionality. diff --git a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/config.h b/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/config.h deleted file mode 100644 index c8354400764..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -/* tap dance stuff*/ -#undef TAPPING_TERM -#define TAPPING_TERM 500 - -#define TAPPING_TOGGLE 2 - -#define EXAMPLESTRING1 "tapdance_1" -#define EXAMPLESTRING2 "tapdance_2" -#define EXAMPLESTRING3 "tapdance_3" -#define EXAMPLESTRING4 "tapdance_4" - -#undef RGBLED_NUM -#define RGBLED_NUM 16 \ No newline at end of file diff --git a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/keymap.c b/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/keymap.c deleted file mode 100644 index ad9786ba7f2..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/keymap.c +++ /dev/null @@ -1,215 +0,0 @@ -/* -tap danc eis turned on in the rules now... -*/ -#include QMK_KEYBOARD_H - -#define _EMOJI 0 -#define _TAPLAND 1 -#define _LEDCNTL 2 - -enum custom_keycodes { - SHRUG, - DISFACE, - FU, - TFLIP, - TFLIP2, - SAD_EYES, - TPUT, - HAPPYFACE, - HEARTFACE, - CLOUD, - CHANFACE, - CMDCLEAR -}; -//Tap Dance Declarations -enum { - TD_EXAMPLE1 = 0, - TD_EXAMPLE2, - TD_EXAMPLE3, - TD_EXAMPLE4 -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* EMOJI Pad - * ,-------------------------------. - * |TFLIP | TFlIP2|DISFACE| FU | - * |------+-------+-------+--------| - * | CLOUD| | | CLEAR | - * |------+-------+-------+--------| - * |SHRUG |DISFACE| HRTFAC| HAPPYF | - * |------+-------+-------+--------| - * | ENTER| |LEDCNTR| tapland| - * `-------------------------------' - */ - //purple - [_EMOJI] = LAYOUT_ortho_4x4( - TFLIP, TFLIP2, KC_NO, FU , - CLOUD, KC_NO, KC_NO, CMDCLEAR, - SHRUG, DISFACE, HEARTFACE, HAPPYFACE, - KC_ENT, RGB_TOG, MO(_LEDCNTL), MO(_TAPLAND) - ), - - /* TapLand // - * ,-------------------------------. - * | str1 | str2 | str3 | str4 | - * |------+-------+-------+--------| - * | | | | | - * |------+-------+-------+--------| - * | | | | | - * |------+-------+-------+--------| - * | | | | | - * `-------------------------------' - */ - //blue - [_TAPLAND] = LAYOUT_ortho_4x4( - TD(TD_EXAMPLE1), TD(TD_EXAMPLE2), TD(TD_EXAMPLE3), TD(TD_EXAMPLE4), - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO - ), - /* LEDControl Pad - * ,-------------------------------. - * | snake|breathe|rainbow|gradient| - * |------+-------+-------+--------| - * | xmas | Val+ | Sat+ | HUE+ | - * |------+-------+-------+--------| - * |kngrdr| Val- | Sat- | HUE- | - * |------+-------+-------+--------| - * | swirl| PLAIN | | ON/OFF | - * `-------------------------------' - */ - //blue - [_LEDCNTL] = LAYOUT_ortho_4x4( - RGB_M_SN, RGB_M_B, RGB_M_R, RGB_M_G, - RGB_M_X, RGB_VAI, RGB_SAI, RGB_HUI, - RGB_M_K, RGB_VAD, RGB_SAD, RGB_HUD, - RGB_M_SW, RGB_M_P, KC_NO, RGB_TOG - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case CLOUD: // (っ◕‿◕)っ - if(record->event.pressed){ - send_unicode_hex_string("0028 3063 25D5 203F 25D5 0029 3063"); - } - return false; - break; - case FU: // t(-_-t) - if(record->event.pressed){ - SEND_STRING("t(-_-t)"); - } - return false; - break; - case HAPPYFACE: // ʘ‿ʘ - if(record->event.pressed){ - send_unicode_hex_string("0298 203F 0298"); - } - return false; - break; - case CMDCLEAR: - if (record->event.pressed) { - register_code(KC_LGUI); - tap_code(KC_A); - unregister_code(KC_LGUI); - tap_code(KC_DEL); - } - return false; - break; - case SHRUG: // ¯\_(ツ)_/¯ - if (record->event.pressed) { - send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF"); - } - return false; - break; - case HEARTFACE: // ♥‿♥ - if(record->event.pressed){ - send_unicode_hex_string("2665 203F 2665"); - } - return false; - break; - case DISFACE: // ಠ_ಠ - if(record->event.pressed){ - send_unicode_hex_string("0CA0 005F 0CA0"); - } - return false; - break; - case TFLIP: // (╯°□°)╯ ︵ ┻━┻ - if(record->event.pressed){ - send_unicode_hex_string("0028 256F 00B0 25A1 00B0 0029 256F 0020 FE35 0020 253B 2501 253B"); - } - return false; - break; - case TFLIP2: // ┻━┻︵ \(°□°)/ ︵ ┻━┻ - if(record->event.pressed){ - send_unicode_hex_string("253B 2501 253B FE35 0020 005C 0028 00B0 25A1 00B0 0029 002F 0020 FE35 0020 253B 2501 253B"); - } - return false; - break; - } - } - return true; -} - - -/* tap dance time */ -void tdexample1(qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 2) { - SEND_STRING(EXAMPLESTRING1); - reset_tap_dance (state); - } -} -void tdexample2(qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 2) { - SEND_STRING(EXAMPLESTRING2); - reset_tap_dance (state); - } -} -void tdexample3(qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 2) { - SEND_STRING(EXAMPLESTRING3); - reset_tap_dance (state); - } -} -void tdexample4(qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 2) { - SEND_STRING(EXAMPLESTRING4); - reset_tap_dance (state); - } -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_EXAMPLE1] = ACTION_TAP_DANCE_FN(tdexample1), - [TD_EXAMPLE2] = ACTION_TAP_DANCE_FN(tdexample2), - [TD_EXAMPLE3] = ACTION_TAP_DANCE_FN(tdexample3), - [TD_EXAMPLE4] = ACTION_TAP_DANCE_FN(tdexample4) -}; - -// Runs just one time when the keyboard initializes. -void matrix_scan_user(void) { - static bool has_ran_yet; - if (!has_ran_yet) { - has_ran_yet = true; - rgblight_setrgb (16, 0, 16); - } -} -uint32_t layer_state_set_user(uint32_t state) { - switch (biton32(state)) { - case _TAPLAND: - rgblight_setrgb(0, 16, 0); //green - break; - case _LEDCNTL: - rgblight_setrgb(0, 0, 16); //blue - break; - case _EMOJI: - rgblight_setrgb (16, 0, 16); //purple - break; - - default: // for any other layers, or the default layer - rgblight_setrgb (16, 0, 16); //purple - break; - } - return state; -} \ No newline at end of file diff --git a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/readme.md b/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/readme.md deleted file mode 100644 index 7a3b8c8e442..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# Ridingtraffic's examples -=== -This keymap has many features: -3 layers -Momentary layer switching -16 pixel neopixel -Unicode Enabled -Tap dance enabled - -The rgb also updates depending on what layer you are on, and then flips back when done. diff --git a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/rules.mk b/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/rules.mk deleted file mode 100644 index de441755318..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# turning on tap dance -TAP_DANCE_ENABLE = yes -RGBLIGHT_ENABLE = yes -MOUSEKEY_ENABLE = no -UNICODE_ENABLE = yes \ No newline at end of file diff --git a/keyboards/1upkeyboards/sweet16/keymaps/sebas/keymap.c b/keyboards/1upkeyboards/sweet16/keymaps/sebas/keymap.c deleted file mode 100644 index a7e587426b3..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/sebas/keymap.c +++ /dev/null @@ -1,23 +0,0 @@ -#include QMK_KEYBOARD_H -#define ALT TG(_FUNC) - -enum layers { - _KEYP, - _FUNC -}; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_KEYP]=LAYOUT_ortho_4x4( - KC_P7, KC_P8, KC_P9, ALT, - KC_P4, KC_P5, KC_P6, KC_PAST, - KC_P1, KC_P2, KC_P3, KC_PMNS, - KC_P0, KC_PDOT, KC_PENT, KC_PPLS -), -[_FUNC]=LAYOUT_ortho_4x4( - KC_MPRV, KC_MPLY, KC_MNXT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK, - KC_INS, KC_HOME, KC_PGUP, XXXXXXX, - KC_DEL, KC_END, KC_PGDN, XXXXXXX -) -}; diff --git a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/keymap.c b/keyboards/1upkeyboards/sweet16/keymaps/switchtester/keymap.c deleted file mode 100644 index caab5b343a0..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -#include QMK_KEYBOARD_H -#include "switches.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ortho_4x4( - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO - ) -}; - -struct mechswitch switches[MATRIX_ROWS][MATRIX_COLS] = { - {CHERRY_MX_BLUE, CHERRY_MX_RED, CHERRY_MX_BLACK, CHERRY_MX_BROWN}, - {GATERON_BLUE, GATERON_RED, GATERON_BLACK, GATERON_BROWN}, - {KAILH_BLUE, KAILH_RED, KAILH_BLACK, KAILH_BROWN}, - {HAKO_CLEAR, HAKO_TRUE, HAKO_VIOLET, HAKO_ROYAL_TRUE} -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - uint8_t col = record->event.key.col; - uint8_t row = record->event.key.row; - - if (record->event.pressed) { - char name[MAX_SWITCH_NAME_LENGTH]; - switch_name(switches[row][col], name); - send_string(name); - SEND_STRING("\n"); - } - return false; -} diff --git a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/readme.md b/keyboards/1upkeyboards/sweet16/keymaps/switchtester/readme.md deleted file mode 100644 index 9edb4e18131..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# Sweet16 as a switch tester - -This keymap uses the Sweet16 as a switch tester. The functionality outputs the switch name of whatever key the user pressed. - -the `switches` two-dimensional (4x4) array contains the switches attached to the macropad. The switches supported are defined as macros in the `switches.h` header file. diff --git a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/rules.mk b/keyboards/1upkeyboards/sweet16/keymaps/switchtester/rules.mk deleted file mode 100644 index c0f2d0182d6..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/rules.mk +++ /dev/null @@ -1,12 +0,0 @@ -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no - -SRC += switches.c diff --git a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.c b/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.c deleted file mode 100644 index ae379954488..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.c +++ /dev/null @@ -1,99 +0,0 @@ -#include -#include -#include "switches.h" - -static const char *BRAND_NAMES[] = { - "Kailh", - "Kailh Low Profile Choc", - "Gateron", - "Cherry MX", - "Cherry ML", - "Outemu", - "Greetech", - "Varmilo", - "MOD", - "Hako" -}; - -static const char *COLOR_NAMES[] = { - "", - "White", - "Black", - "Blue", - "Red", - "Yellow", - "Brown", - "Green", - "Clear", - "Silver", - "Nature White", - "Grey", - "Jade", - "Navy", - "Burnt Orange", - "Pale Blue", - "Dark Yellow", - "Gold", - "Chocolate White", - "Burgundy", - "Purple", - "Light Green", - "True", - "Berry", - "Plum", - "Sage", - "Violet", - "L", - "M", - "H", - "SH" -}; - -static const char *VARIANT_NAMES[] = { - "", - "BOX", - "BOX Thick", - "BOX Heavy", - "Silent", - "Tactile", - "Linear", - "Speed", - "Speed Heavy", - "Speed Thick Click", - "Pro", - "Pro Heavy", - "Royal", - "Thick Click", - "Heavy" -}; - -const char *brand_name(struct mechswitch ms) { - return BRAND_NAMES[ms.brand - 1]; -} - -const char *variant_name(struct mechswitch ms) { - return VARIANT_NAMES[ms.variant]; -} - -const char *color_name(struct mechswitch ms) { - return COLOR_NAMES[ms.color]; -} - -void switch_name(struct mechswitch ms, char *buf) { - const char *v_name = variant_name(ms); - const char *c_name = color_name(ms); - - snprintf(buf, MAX_SWITCH_NAME_LENGTH, "%s", brand_name(ms)); - strncat(buf, " ", MAX_SWITCH_NAME_LENGTH - strlen(buf)); - if (strlen(v_name) > 0) { - strncat(buf, v_name, MAX_SWITCH_NAME_LENGTH - strlen(buf)); - strncat(buf, " ", MAX_SWITCH_NAME_LENGTH - strlen(buf)); - } - if (strlen(c_name) > 0) { - strncat(buf, c_name, MAX_SWITCH_NAME_LENGTH - strlen(buf)); - } -} - -int bitfieldtoi(struct mechswitch ms) { - return ((ms.brand << 9) | (ms.variant << 5) | ms.color); -} diff --git a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.h b/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.h deleted file mode 100644 index 6e58068bf5e..00000000000 --- a/keyboards/1upkeyboards/sweet16/keymaps/switchtester/switches.h +++ /dev/null @@ -1,189 +0,0 @@ -#pragma once - -struct mechswitch -{ - unsigned int brand: 4; - unsigned int variant: 4; - unsigned int color: 5; -}; - -#define MAX_SWITCH_NAME_LENGTH 256 - -#define BRAND_KAILH 1 -#define BRAND_KAILH_LOW 2 -#define BRAND_GATERON 3 -#define BRAND_CHERRY_MX 4 -#define BRAND_CHERRY_ML 5 -#define BRAND_OUTEMU 6 -#define BRAND_GREETECH 7 -#define BRAND_VARMILO 8 -#define BRAND_MOD 9 -#define BRAND_HAKO 10 - -#define COLOR_NO 0 -#define COLOR_WHITE 1 -#define COLOR_BLACK 2 -#define COLOR_BLUE 3 -#define COLOR_RED 4 -#define COLOR_YELLOW 5 -#define COLOR_BROWN 6 -#define COLOR_GREEN 7 -#define COLOR_CLEAR 8 -#define COLOR_SILVER 9 -#define COLOR_NATURE_WHITE 10 -#define COLOR_GREY 11 -#define COLOR_JADE 12 -#define COLOR_NAVY 13 -#define COLOR_BURNT_ORANGE 14 -#define COLOR_PALE_BLUE 15 -#define COLOR_DARK_YELLOW 16 -#define COLOR_GOLD 17 -#define COLOR_CHOCOLATE_WHITE 18 -#define COLOR_BURGUNDY 19 -#define COLOR_PURPLE 20 -#define COLOR_LIGHT_GREEN 21 -#define COLOR_TRUE 22 -#define COLOR_BERRY 23 -#define COLOR_PLUM 24 -#define COLOR_SAGE 25 -#define COLOR_VIOLET 26 -#define COLOR_L 27 -#define COLOR_M 28 -#define COLOR_H 29 -#define COLOR_SH 30 - -#define VARIANT_NO 0 -#define VARIANT_BOX 1 -#define VARIANT_BOX_THICK 2 -#define VARIANT_BOX_HEAVY 3 -#define VARIANT_SILENT 4 -#define VARIANT_TACTILE 5 -#define VARIANT_LINEAR 6 -#define VARIANT_SPEED 7 -#define VARIANT_SPEED_HEAVY 8 -#define VARIANT_SPEED_CLICK_THICK 9 -#define VARIANT_PRO 10 -#define VARIANT_PRO_HEAVY 11 -#define VARIANT_ROYAL 12 -#define VARIANT_CLICK_THICK 13 - -#define CHERRY_MX_BLUE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BLUE} -#define CHERRY_MX_RED {BRAND_CHERRY_MX, VARIANT_NO, COLOR_RED} -#define CHERRY_MX_BROWN {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BROWN} -#define CHERRY_MX_BLACK {BRAND_CHERRY_MX, VARIANT_NO, COLOR_BLACK} -#define CHERRY_MX_GREEN {BRAND_CHERRY_MX, VARIANT_NO, COLOR_GREEN} -#define CHERRY_MX_CLEAR {BRAND_CHERRY_MX, VARIANT_NO, COLOR_CLEAR} -#define CHERRY_MX_WHITE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_WHITE} -#define CHERRY_MX_SILVER {BRAND_CHERRY_MX, VARIANT_NO, COLOR_SILVER} -#define CHERRY_MX_NATURE_WHITE {BRAND_CHERRY_MX, VARIANT_NO, COLOR_NATURE_WHITE} -#define CHERRY_MX_SILENT_BLACK {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_BLACK} -#define CHERRY_MX_SILENT_RED {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_RED} -#define CHERRY_MX_TACTILE_BLACK {BRAND_CHERRY_MX, VARIANT_SILENT, COLOR_GREY} -#define CHERRY_MX_LINEAR_BLACK {BRAND_CHERRY_MX, VARIANT_LINEAR, COLOR_GREY} - -#define CHERRY_ML {BRAND_CHERRY_ML, VARIANT_NO, COLOR_NO} - -#define GATERON_BLUE {BRAND_GATERON, VARIANT_NO, COLOR_BLUE} -#define GATERON_BROWN {BRAND_GATERON, VARIANT_NO, COLOR_BROWN} -#define GATERON_BLACK {BRAND_GATERON, VARIANT_NO, COLOR_BLACK} -#define GATERON_RED {BRAND_GATERON, VARIANT_NO, COLOR_RED} -#define GATERON_CLEAR {BRAND_GATERON, VARIANT_NO, COLOR_CLEAR} -#define GATERON_GREEN {BRAND_GATERON, VARIANT_NO, COLOR_GREEN} -#define GATERON_YELLOW {BRAND_GATERON, VARIANT_NO, COLOR_YELLOW} - -#define GATERON_SILENT_CLEAR {BRAND_GATERON, VARIANT_SILENT, COLOR_CLEAR} -#define GATERON_SILENT_RED {BRAND_GATERON, VARIANT_SILENT, COLOR_RED} -#define GATERON_SILENT_YELLOW {BRAND_GATERON, VARIANT_SILENT, COLOR_YELLOW} -#define GATERON_SILENT_BLACK {BRAND_GATERON, VARIANT_SILENT, COLOR_BLACK} -#define GATERON_SILENT_BROWN {BRAND_GATERON, VARIANT_SILENT, COLOR_BROWN} - -#define GREETECH_BLUE {BRAND_GREETECH, VARIANT_NO, COLOR_BLUE} -#define GREETECH_BROWN {BRAND_GREETECH, VARIANT_NO, COLOR_BROWN} -#define GREETECH_BLACK {BRAND_GREETECH, VARIANT_NO, COLOR_BLACK} -#define GREETECH_RED {BRAND_GREETECH, VARIANT_NO, COLOR_RED} - -#define OUTEMU_BLUE {BRAND_OUTEMU, VARIANT_NO, COLOR_BLUE} -#define OUTEMU_BROWN {BRAND_OUTEMU, VARIANT_NO, COLOR_BROWN} -#define OUTEMU_BLACK {BRAND_OUTEMU, VARIANT_NO, COLOR_BLACK} -#define OUTEMU_RED {BRAND_OUTEMU, VARIANT_NO, COLOR_RED} - -#define KAILH_BLUE {BRAND_KAILH, VARIANT_NO, COLOR_BLUE} -#define KAILH_BROWN {BRAND_KAILH, VARIANT_NO, COLOR_BROWN} -#define KAILH_BLACK {BRAND_KAILH, VARIANT_NO, COLOR_BLACK} -#define KAILH_RED {BRAND_KAILH, VARIANT_NO, COLOR_RED} -#define KAILH_GREEN {BRAND_KAILH, VARIANT_NO, COLOR_GREEN} - -#define KAILH_BOX_WHITE {BRAND_KAILH, VARIANT_BOX, COLOR_WHITE} -#define KAILH_BOX_RED {BRAND_KAILH, VARIANT_BOX, COLOR_RED} -#define KAILH_BOX_BLACK {BRAND_KAILH, VARIANT_BOX, COLOR_BLACK} -#define KAILH_BOX_BROWN {BRAND_KAILH, VARIANT_BOX, COLOR_BROWN} -#define KAILH_BOX_ROYAL {BRAND_KAILH, VARIANT_BOX, COLOR_ROYAL} - -#define KAILH_BOX_THICK_JADE {BRAND_KAILH, VARIANT_BOX_THICK, COLOR_JADE} -#define KAILH_BOX_THICK_NAVY {BRAND_KAILH, VARIANT_BOX_THICK, COLOR_NAVY} -#define KAILH_BOX_HEAVY_BURNT_ORANGE {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_BURNT_ORANGE} -#define KAILH_BOX_HEAVY_PALE_BLUE {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_PALE_BLUE} -#define KAILH_BOX_HEAVY_DARK_YELLOW {BRAND_KAILH, VARIANT_BOX_HEAVY, COLOR_DARK_YELLOW} - -#define KAILH_SPEED_BRONZE {BRAND_KAILH, VARIANT_SPEED, COLOR_BRONZE} -#define KAILH_SPEED_COPPER {BRAND_KAILH, VARIANT_SPEED, COLOR_COPPER} -#define KAILH_SPEED_GOLD {BRAND_KAILH, VARIANT_SPEED, COLOR_GOLD} -#define KAILH_SPEED_SILVER {BRAND_KAILH, VARIANT_SPEED, COLOR_SILVER} - -#define KAILH_SPEED_HEAVY_BURNT_ORANGE {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_BURNT_ORANGE} -#define KAILH_SPEED_HEAVY_PALE_BLUE {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_PALE_BLUE} -#define KAILH_SPEED_HEAVY_DARK_YELLOW {BRAND_KAILH, VARIANT_SPEED_HEAVY, COLOR_DARK_YELLOW} - -#define KAILH_SPEED_THICK_CLICK_NAVY {BRAND_KAILH, VARIANT_SPEED_CLICK_THICK, COLOR_NAVY} - -#define KAILH_PRO_BURGUNDY {BRAND_KAILH, VARIANT_PRO, COLOR_BURGUNDY} -#define KAILH_PRO_PURPLE {BRAND_KAILH, VARIANT_PRO, COLOR_PURPLE} -#define KAILH_PRO_LIGHT_GREEN {BRAND_KAILH, VARIANT_PRO, COLOR_LIGHT_GREEN} - -#define KAILH_PRO_HEAVY_BERRY {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_BERRY} -#define KAILH_PRO_HEAVY_PLUM {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_PLUM} -#define KAILH_PRO_GEAVY_SAGE {BRAND_KAILH, VARIANT_PRO_HEAVY, COLOR_SAGE} - -#define KAILH_LOW_WHITE {BRAND_KAILH_LOW, VARIANT_NO, COLOR_WHITE} -#define KAILH_LOW_BROWN {BRAND_KAILH_LOW, VARIANT_NO, COLOR_BROWN} -#define KAILH_LOW_RED {BRAND_KAILH_LOW, VARIANT_NO, COLOR_RED} -#define KAILH_LOW_CHOCOLATE_WHITE {BRAND_KAILH_LOW, VARIANT_NO, COLOR_CHOCOLATE_WHITE} -#define KAILH_LOW_THICK_CLICK_NAVY {BRAND_KAILH_LOW, VARIANT_THICK_CLICK, COLOR_NAVY} -#define KAILH_LOW_THICK_CLICK_JADE {BRAND_KAILH_LOW, VARIANT_THICK_CLICK, COLOR_JADE} -#define KAILH_LOW_HEAVY_DARK_YELLOW {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_DARK_YELLOW} -#define KAILH_LOW_HEAVY_BURNT_ORANGE {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_BURNT_ORANGE} -#define KAILH_LOW_HEAVY_PALE_BLUE {BRAND_KAILH_LOW, VARIANT_HEAVY, COLOR_PALE_BLUE} - -#define HAKO_ROYAL_CLEAR {BRAND_HAKO, VARIANT_ROYAL, COLOR_CLEAR} -#define HAKO_ROYAL_TRUE {BRAND_HAKO, VARIANT_ROYAL, COLOR_TRUE} - -#define HAKO_CLEAR {BRAND_HAKO, VARIANT_NO, COLOR_CLEAR} -#define HAKO_TRUE {BRAND_HAKO, VARIANT_NO, COLOR_TRUE} -#define HAKO_VIOLET {BRAND_HAKO, VARIANT_NO, COLOR_VIOLET} - -#define MOD_L_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_L} -#define MOD_M_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_M} -#define MOD_H_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_H} -#define MOD_SH_TACTILE {BRAND_MOD, VARIANT_TACTILE, COLOR_SH} - -#define MOD_L_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_L} -#define MOD_M_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_M} -#define MOD_H_LINEAR {BRAND_MOD, VARIANT_LINEAR, COLOR_H} - -#define BYTE_TO_BINARY_PATTERN "%c%c%c%c%c%c%c%c" -#define BYTE_TO_BINARY(byte) \ - (byte & 0x80 ? '1' : '0'), \ - (byte & 0x40 ? '1' : '0'), \ - (byte & 0x20 ? '1' : '0'), \ - (byte & 0x10 ? '1' : '0'), \ - (byte & 0x08 ? '1' : '0'), \ - (byte & 0x04 ? '1' : '0'), \ - (byte & 0x02 ? '1' : '0'), \ - (byte & 0x01 ? '1' : '0') - - -const char *brand_name(struct mechswitch ms); -const char *variant_name(struct mechswitch ms); -const char *color_name(struct mechswitch ms); -void switch_name(struct mechswitch ms, char *buf); -int bitfieldtoi(struct mechswitch ms); diff --git a/keyboards/1upkeyboards/sweet16/readme.md b/keyboards/1upkeyboards/sweet16/readme.md deleted file mode 100644 index f096a5fc992..00000000000 --- a/keyboards/1upkeyboards/sweet16/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Sweet 16 Macropad - -A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Bishop Keyboards - -Keyboard Maintainer: QMK Community -Hardware Supported: Sweet16 Keyboard PCB -Hardware Availability: [1up Keyboards](https://1upkeyboards.com/) - -Make example for this keyboard (after setting up your build environment): - - make 1upkeyboards/sweet16:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/1upkeyboards/sweet16/rules.mk b/keyboards/1upkeyboards/sweet16/rules.mk deleted file mode 100644 index e3436dc3387..00000000000 --- a/keyboards/1upkeyboards/sweet16/rules.mk +++ /dev/null @@ -1,57 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes -EXTRAFLAGS += -flto diff --git a/keyboards/1upkeyboards/sweet16/sweet16.c b/keyboards/1upkeyboards/sweet16/sweet16.c deleted file mode 100644 index 2f116c2a378..00000000000 --- a/keyboards/1upkeyboards/sweet16/sweet16.c +++ /dev/null @@ -1 +0,0 @@ -#include "sweet16.h" \ No newline at end of file diff --git a/keyboards/1upkeyboards/sweet16/sweet16.h b/keyboards/1upkeyboards/sweet16/sweet16.h deleted file mode 100644 index 7320ccd9e07..00000000000 --- a/keyboards/1upkeyboards/sweet16/sweet16.h +++ /dev/null @@ -1,30 +0,0 @@ -#pragma once - -#include "quantum.h" - -// Any changes to the layout names and/or definitions must also be made to info.json - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 } \ -} - -#define LAYOUT_numpad_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, \ - K20, K21, K22, K23, \ - K31, K32 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, KC_NO }, \ - { K20, K21, K22, K23 }, \ - { KC_NO, K31, K32, KC_NO } \ -} - diff --git a/keyboards/30wer/30wer.c b/keyboards/30wer/30wer.c deleted file mode 100644 index a46c5431960..00000000000 --- a/keyboards/30wer/30wer.c +++ /dev/null @@ -1 +0,0 @@ -#include "30wer.h" diff --git a/keyboards/30wer/30wer.h b/keyboards/30wer/30wer.h deleted file mode 100644 index e7bce82776b..00000000000 --- a/keyboards/30wer/30wer.h +++ /dev/null @@ -1,14 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \ -} diff --git a/keyboards/30wer/config.h b/keyboards/30wer/config.h deleted file mode 100644 index cf1bd72e563..00000000000 --- a/keyboards/30wer/config.h +++ /dev/null @@ -1,26 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x1234 -#define PRODUCT_ID 0x5678 -#define DEVICE_VER 0x0000 -#define MANUFACTURER 8o7wer -#define PRODUCT 30wer -#define DESCRIPTION Gherkin style construction 30% staggered pcb kit - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 13 - -/* pcb default pin-out */ -#define MATRIX_ROW_PINS { E6, B4, B5 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0, D4, C6, D7 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* prevent stuck modifiers */ -#define PREVENT_STUCK_MODIFIERS diff --git a/keyboards/30wer/info.json b/keyboards/30wer/info.json deleted file mode 100644 index 0fbbeb47ddf..00000000000 --- a/keyboards/30wer/info.json +++ /dev/null @@ -1,51 +0,0 @@ -{ - "keyboard_name": "30wer", - "url": "", - "maintainer": "qmk", - "width": 13.25, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Tab", "x":0, "y":0}, - {"label":"Q", "x":1, "y":0}, - {"label":"W", "x":2, "y":0}, - {"label":"E", "x":3, "y":0}, - {"label":"R", "x":4, "y":0}, - {"label":"T", "x":5, "y":0}, - {"label":"Y", "x":6, "y":0}, - {"label":"U", "x":7, "y":0}, - {"label":"I", "x":8, "y":0}, - {"label":"O", "x":9, "y":0}, - {"label":"P", "x":10, "y":0}, - {"label":"Bksp", "x":11, "y":0}, - {"label":"Delete", "x":12, "y":0, "w":1.25}, - {"label":"Ctrl", "x":0, "y":1, "w":1.25}, - {"label":"A", "x":1.25, "y":1}, - {"label":"S", "x":2.25, "y":1}, - {"label":"D", "x":3.25, "y":1}, - {"label":"F", "x":4.25, "y":1}, - {"label":"G", "x":5.25, "y":1}, - {"label":"H", "x":6.25, "y":1}, - {"label":"J", "x":7.25, "y":1}, - {"label":"K", "x":8.25, "y":1}, - {"label":"L", "x":9.25, "y":1}, - {"label":":", "x":10.25, "y":1}, - {"label":"\"", "x":11.25, "y":1}, - {"label":"Enter", "x":12.25, "y":1}, - {"label":"Shift", "x":0, "y":2, "w":1.75}, - {"label":"Z", "x":1.75, "y":2}, - {"label":"X", "x":2.75, "y":2}, - {"label":"C", "x":3.75, "y":2}, - {"label":"V", "x":4.75, "y":2}, - {"label":"B", "x":5.75, "y":2}, - {"label":"N", "x":6.75, "y":2}, - {"label":"M", "x":7.75, "y":2}, - {"label":"<", "x":8.75, "y":2}, - {"label":">", "x":9.75, "y":2}, - {"label":"?", "x":10.75, "y":2}, - {"label":"Space", "x":11.75, "y":2, "w":1.5} - ] - } - } -} diff --git a/keyboards/30wer/keymaps/default/keymap.c b/keyboards/30wer/keymaps/default/keymap.c deleted file mode 100644 index 9e39a500a34..00000000000 --- a/keyboards/30wer/keymaps/default/keymap.c +++ /dev/null @@ -1,17 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[0] = LAYOUT( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, LT(1, KC_SPC) \ -), - -[1] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_UP, KC_DEL, \ - _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \ - KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______ \ -), - -}; diff --git a/keyboards/30wer/readme.md b/keyboards/30wer/readme.md deleted file mode 100644 index c9184f726ba..00000000000 --- a/keyboards/30wer/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -30wer by 8o7wer -=== - -![30wer](https://i.imgur.com/ZYbRvY7.png) - -Keyboard Maintainer: [Filip Sund](https://github.com/FSund) -Hardware Supported: Pro Micro -Hardware Availability: Group buy - -More info in the [group by thread at Keebtalk](https://www.keebtalk.com/t/gb-30wer-by-8o7wer/3618/). - -Make example for this keyboard (after setting up your build environment): - - make 30wer:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/30wer/rules.mk b/keyboards/30wer/rules.mk deleted file mode 100644 index 9d77ec54611..00000000000 --- a/keyboards/30wer/rules.mk +++ /dev/null @@ -1,60 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/40percentclub/25/25.c b/keyboards/40percentclub/25/25.c deleted file mode 100644 index 54a42d263c8..00000000000 --- a/keyboards/40percentclub/25/25.c +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "25.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -#ifdef SWAP_HANDS_ENABLE -__attribute__ ((weak)) -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}}, - {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}}, - {{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}}, - {{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}}, - {{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}}, - - {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, - {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, - {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, - {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}}, - {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}}, -}; -#endif diff --git a/keyboards/40percentclub/25/25.h b/keyboards/40percentclub/25/25.h deleted file mode 100644 index db9c48b524a..00000000000 --- a/keyboards/40percentclub/25/25.h +++ /dev/null @@ -1,85 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -#ifndef FLIP_HALF -#define LAYOUT_ortho_5x10( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \ - L40, L41, L42, L43, L44, R40, R41, R42, R43, R44 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { L30, L31, L32, L33, L34 }, \ - { L40, L41, L42, L43, L44 }, \ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 }, \ - { R34, R33, R32, R31, R30 }, \ - { R44, R43, R42, R41, R40 } \ -} -#else -#define LAYOUT_ortho_5x10( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \ - L40, L41, L42, L43, L44, R40, R41, R42, R43, R44 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { L30, L31, L32, L33, L34 }, \ - { L40, L41, L42, L43, L44 }, \ - { R00, R01, R02, R03, R04 }, \ - { R10, R11, R12, R13, R14 }, \ - { R20, R21, R22, R23, R24 }, \ - { R30, R31, R32, R33, R34 }, \ - { R40, R41, R42, R43, R44 } \ -} -#endif - -#define LAYOUT_ortho_5x5( \ - L00, L01, L02, L03, L04, \ - L10, L11, L12, L13, L14, \ - L20, L21, L22, L23, L24, \ - L30, L31, L32, L33, L34, \ - L40, L41, L42, L43, L44 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { L30, L31, L32, L33, L34 }, \ - { L40, L41, L42, L43, L44 }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ } \ -} - -#define LAYOUT_macro LAYOUT_ortho_5x5 -#define LAYOUT_split LAYOUT_ortho_5x10 - -#ifdef USE_I2C - #error "I2C not Supported" -#endif diff --git a/keyboards/40percentclub/25/config.h b/keyboards/40percentclub/25/config.h deleted file mode 100644 index c9c02b47e25..00000000000 --- a/keyboards/40percentclub/25/config.h +++ /dev/null @@ -1,227 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0F25 -#define MANUFACTURER di0ib -#define PRODUCT The 5x5 Keyboard -#define DESCRIPTION A split 50 key keyboard - -#define USE_SERIAL -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - -/* Select hand configuration */ -#define MASTER_LEFT -//#define MASTER_RIGHT -//#define EE_HANDS - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 5*2 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/25/info.json b/keyboards/40percentclub/25/info.json deleted file mode 100644 index abb77a0677c..00000000000 --- a/keyboards/40percentclub/25/info.json +++ /dev/null @@ -1,29 +0,0 @@ -{ - "keyboard_name": "foobar", - "url": "", - "maintainer": "qmk", - "width": 6, - "height": 2, - "layouts": { - "LAYOUT_macro": { - "key_count": 15, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, - {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, - {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, - {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4} - ] - }, - "LAYOUT_split": { - "key_count": 30, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, - {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, - {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, - {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4} - ] - } - } -} diff --git a/keyboards/40percentclub/25/keymaps/default/config.h b/keyboards/40percentclub/25/keymaps/default/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/25/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/25/keymaps/default/keymap.c b/keyboards/40percentclub/25/keymaps/default/keymap.c deleted file mode 100644 index ccb54c82a1a..00000000000 --- a/keyboards/40percentclub/25/keymaps/default/keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,---------------------------------------------------------------------. - * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - * |------+------+------+------+------+------+------+------+------+------| - * | Q | W | E | R | T | Y | U | I | O | P | - * |------+------+------+------+-------------+------+------+------+------| - * | A | S | D | F | G | H | J | K | L | Bksp | - * |------+------+------+------+------|------+------+------+------+------| - * | Z | X | C | V | B | N | M | , | . |Enter | - * |------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt |Lower |Space | Shift| Left | Down | Up |Right | - * `---------------------------------------------------------------------' - */ - [_QWERTY] = LAYOUT_split( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_BSPC, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_ENT, \ - KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_LSFT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Lower - * ,---------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | ` | / | _ | + | - * |------+------+------+------+------|------+------+------+------+------| - * | F7 | F8 | F9 | F10 | F11 | F12 | ~ | [ | ] | \ | - * |------+------+------+------+-------------+------+------+------+------| - * | Esc | | | | | | | ; | " | Del | - * |------+------+------+------+------|------+------+------+------+------| - * | Tab | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------| - * | | | | | | | Home | PgDn | PgUp | End | - * `---------------------------------------------------------------------' - */ - [_LOWER] = LAYOUT_split( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \ - KC_ESC, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL, \ - KC_TAB, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/25/keymaps/default/readme.md b/keyboards/40percentclub/25/keymaps/default/readme.md deleted file mode 100644 index 7558c42ec50..00000000000 --- a/keyboards/40percentclub/25/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default split keymap for 25 diff --git a/keyboards/40percentclub/25/keymaps/macro/config.h b/keyboards/40percentclub/25/keymaps/macro/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/25/keymaps/macro/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/25/keymaps/macro/keymap.c b/keyboards/40percentclub/25/keymaps/macro/keymap.c deleted file mode 100644 index 80d227710b8..00000000000 --- a/keyboards/40percentclub/25/keymaps/macro/keymap.c +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_macro( - KC_ESC, KC_1, KC_2, KC_3, KC_4, \ - KC_GRV, KC_Q, KC_W, KC_E, KC_R, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/25/keymaps/macro/readme.md b/keyboards/40percentclub/25/keymaps/macro/readme.md deleted file mode 100644 index 6645f93dd88..00000000000 --- a/keyboards/40percentclub/25/keymaps/macro/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default macro keymap for 25 diff --git a/keyboards/40percentclub/25/readme.md b/keyboards/40percentclub/25/readme.md deleted file mode 100644 index b1685b618dd..00000000000 --- a/keyboards/40percentclub/25/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# 25 - -![25](https://2.bp.blogspot.com/-lBK_ZlB3a9Q/WcAM0B_vwdI/AAAAAAACDgs/qnI9YB53pzck4Bw0v5QRvypDMs80CxWVQCLcBGAs/s640/IMG_0695.JPG) -=== - -Split 50 key keyboard - it is the largest keybad that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 25 key macropad. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/25) - -Keyboard Maintainer: QMK Community -Hardware Supported: 25 PCB -Hardware Availability: [25 project on 40% Keyboards](http://www.40percent.club/2017/09/25.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/25:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk deleted file mode 100644 index bfcdce7c995..00000000000 --- a/keyboards/40percentclub/25/rules.mk +++ /dev/null @@ -1,85 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -# Enable generic behavior for split boards -SPLIT_KEYBOARD = yes - -LAYOUTS = ortho_5x5 ortho_5x10 diff --git a/keyboards/40percentclub/4x4/4x4.c b/keyboards/40percentclub/4x4/4x4.c deleted file mode 100644 index 963b6d00d44..00000000000 --- a/keyboards/40percentclub/4x4/4x4.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include "4x4.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/4x4/4x4.h b/keyboards/40percentclub/4x4/4x4.h deleted file mode 100644 index 359cdc80a16..00000000000 --- a/keyboards/40percentclub/4x4/4x4.h +++ /dev/null @@ -1,71 +0,0 @@ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) \ -{ \ - { K00, K01, K02, K03, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K10, K11, K12, K13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K20, K21, K22, K23, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K30, K31, K32, K33, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \ -} -#define LAYOUT_ortho_4x8( \ - K00, K01, K02, K03, K04, K05, K06, K07, \ - K10, K11, K12, K13, K14, K15, K16, K17, \ - K20, K21, K22, K23, K24, K25, K26, K27, \ - K30, K31, K32, K33, K34, K35, K36, K37\ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K20, K21, K22, K23, K24, K25, K26, K27, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K30, K31, K32, K33, K34, K35, K35, K37, ___, ___, ___, ___, ___, ___, ___, ___} \ -} -#define LAYOUT_ortho_4x12( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, ___, ___, ___, ___}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, ___, ___, ___, ___}, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, ___, ___, ___, ___}, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, ___, ___, ___, ___} \ -} - -#define LAYOUT_ortho_4x16( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \ -} - -#define LAYOUT_kc_ortho_4x12( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b \ -) \ -{ \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, ___, ___, ___, ___}, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, ___, ___, ___, ___}, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, ___, ___, ___, ___}, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b, ___, ___, ___, ___} \ -} diff --git a/keyboards/40percentclub/4x4/config.h b/keyboards/40percentclub/4x4/config.h deleted file mode 100644 index 09ec5a4ec90..00000000000 --- a/keyboards/40percentclub/4x4/config.h +++ /dev/null @@ -1,194 +0,0 @@ - - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x4444 -#define MANUFACTURER di0ib -#define PRODUCT The 4x4 Keyboard -#define DESCRIPTION A modular compact keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, D1, D0, D4 } -#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN C7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/4x4/keymaps/default/config.h b/keyboards/40percentclub/4x4/keymaps/default/config.h deleted file mode 100644 index d533d806c90..00000000000 --- a/keyboards/40percentclub/4x4/keymaps/default/config.h +++ /dev/null @@ -1,5 +0,0 @@ - - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/4x4/keymaps/default/keymap.c b/keyboards/40percentclub/4x4/keymaps/default/keymap.c deleted file mode 100644 index 1f52b20667a..00000000000 --- a/keyboards/40percentclub/4x4/keymaps/default/keymap.c +++ /dev/null @@ -1,104 +0,0 @@ - -#include QMK_KEYBOARD_H - -#define PAD 0 -#define _QW 1 -#define NUM 2 -#define DIR 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Single 4x4 board only - * .-----------------------------------. - * | 7 | 8 | 9 | / | - * |--------+--------+--------+--------| - * | 4 | 5 | 6 | * | - * |--------+--------+--------+--------| - * | 1 | 2 | 3 | - | - * |--------+--------+--------+--------| - * | 0 | QWERTY | . | + | - * '-----------------------------------' - */ - - [PAD] = LAYOUT_ortho_4x4( - KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS, - KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, - KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, - KC_KP_0, DF(_QW), KC_KP_DOT, KC_PPLS - ), - -/* QWERTY - * .-----------------------------------------------------------------------------------------------------------------------------------------------. - * | ESC | Q | W | E | R | T | Y | U | I | O | P | BACKSP | 7 | 8 | 9 | / | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | TAB | A | S | D | F | G | H | J | K | L | ; | ' | 4 | 5 | 6 | * | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | SHIFT | Z | X | C | V | B | N | M | , | . | / | ENT/SFT| 1 | 2 | 3 | - | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LGUI | ALT | ALT | NUM | SHIFT | SPACE | DIR | RGUI | RALT | DEL | CTRL | 0 | 0 | . | + | - * '-----------------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_QW] = LAYOUT_ortho_4x16( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, - KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC, MO(DIR), KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PPLS - ), - -/* NUMBERS - * .-----------------------------------------------------------------------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | NUMLOCK| / | * | - | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | + | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | F11 | F12 | | | | ENTER | SHIFT | RGUI | ./ALT | BKSC | | | | ENTER | | - * | | | | | | | | | | |CTRLhold| | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| | - * | | | | | | | ENTER | SHIFT | | | | | | | | | - * '-----------------------------------------------------------------------------------------------------------------------------------------------' - */ - - [NUM] = LAYOUT_ortho_4x16( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, KC_PPLS, _______, - _______, KC_F11, KC_F12, _______, _______, _______, KC_ENT, KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______, - _______, _______, _______, _______, _______, _______, KC_ENT, KC_RSFT, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -/* DIRECTIONS - * .-----------------------------------------------------------------------------------------------------------------------------------------------. - * | RESET | TAB | up | | INS | CTRL | SHIFT | PgUp | Home | - | = | DEL | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | CAPSLK | left | down | right | PrScr | SHIFT | CTRL | PgDn | End | [ | ] | \ | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | P-Brk | | | | | | | RGUI | ALT | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | KEYPAD | | | | | | | | | | | | | | | | - * '-----------------------------------------------------------------------------------------------------------------------------------------------' - */ - - [DIR] = LAYOUT_ortho_4x16( - RESET, KC_TAB, KC_UP, _______, KC_INS, KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_DEL, _______, _______, _______, _______, - KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END, KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______, _______, - _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______, _______, - DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -}; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/4x4/readme.md b/keyboards/40percentclub/4x4/readme.md deleted file mode 100644 index 077a2049be9..00000000000 --- a/keyboards/40percentclub/4x4/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -# 4x4 - -![4x4](https://2.bp.blogspot.com/-xRZOpwlTT4c/WlOwRIVAecI/AAAAAAACKo4/d75juHTX2W0Nrch7NigssMbagvl3I4w_ACEwYBhgL/s1600/e.jpg) -=== - -**Modular keypad/keyboard** -The basic unit is a 4x4 matrix with 16 keys. Up to 4 of these can be connected to each other side by side. -4x4, 4x8, 4x12 and 4x16 are possible. -There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers. -**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._** - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/4x4) - -Keyboard Maintainer: QMK Community -Hardware Supported: 4x4 PCB -Hardware Availability: [4x4x4x4x4 project on 40% Keyboards](http://www.40percent.club/2018/01/4x4x4x4x4.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/4x4:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/4x4/rules.mk b/keyboards/40percentclub/4x4/rules.mk deleted file mode 100644 index 4ab5e7431c9..00000000000 --- a/keyboards/40percentclub/4x4/rules.mk +++ /dev/null @@ -1,79 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 ortho_4x16 diff --git a/keyboards/40percentclub/5x5/5x5.c b/keyboards/40percentclub/5x5/5x5.c deleted file mode 100644 index 20e5246094c..00000000000 --- a/keyboards/40percentclub/5x5/5x5.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include "5x5.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/5x5/5x5.h b/keyboards/40percentclub/5x5/5x5.h deleted file mode 100644 index 182e9e8190d..00000000000 --- a/keyboards/40percentclub/5x5/5x5.h +++ /dev/null @@ -1,53 +0,0 @@ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_ortho_5x5( \ - K00, K01, K02, K03, K04, \ - K10, K11, K12, K13, K14, \ - K20, K21, K22, K23, K24, \ - K30, K31, K32, K33, K34, \ - K40, K41, K42, K43, K44 \ -) \ -{ \ - { K00, K01, K02, K03, K04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K10, K11, K12, K13, K14, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K20, K21, K22, K23, K24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K30, K31, K32, K33, K34, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \ - { K40, K41, K42, K43, K44, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \ -} - -#define LAYOUT_ortho_5x10( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, ___, ___, ___, ___, ___}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, ___, ___, ___, ___, ___}, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, ___, ___, ___, ___, ___}, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, ___, ___, ___, ___, ___} \ -} - -#define LAYOUT_ortho_5x15( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e}, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e}, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \ -} diff --git a/keyboards/40percentclub/5x5/config.h b/keyboards/40percentclub/5x5/config.h deleted file mode 100644 index a9d294bc94c..00000000000 --- a/keyboards/40percentclub/5x5/config.h +++ /dev/null @@ -1,203 +0,0 @@ - - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x05B5 -#define MANUFACTURER di0ib -#define PRODUCT The 5x5 Keyboard -#define DESCRIPTION A 25 or 50 or 75 key keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, D1, D0, D4, C6 } -#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/5x5/keymaps/default/config.h b/keyboards/40percentclub/5x5/keymaps/default/config.h deleted file mode 100644 index d533d806c90..00000000000 --- a/keyboards/40percentclub/5x5/keymaps/default/config.h +++ /dev/null @@ -1,5 +0,0 @@ - - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/5x5/keymaps/default/keymap.c b/keyboards/40percentclub/5x5/keymaps/default/keymap.c deleted file mode 100644 index 56ddbb23f5b..00000000000 --- a/keyboards/40percentclub/5x5/keymaps/default/keymap.c +++ /dev/null @@ -1,117 +0,0 @@ - -#include QMK_KEYBOARD_H - -#define PAD 0 -#define _QW 1 -#define NUM 2 -#define DIR 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Single 5x5 board only - * .--------------------------------------------. - * | QWERTY | / | * | - | | - * |--------+--------+--------+--------+--------| - * | 7 | 8 | 9 | + | | - * |--------+--------+--------+--------+--------| - * | 4 | 5 | 6 | + | | - * |--------+--------+--------+--------+--------| - * | 1 | 2 | 3 | ENTER | | - * |--------+--------+--------+--------+--------| - * | 0 | 0 | . | ENTER | | - * '--------------------------------------------' - */ - - [PAD] = LAYOUT_ortho_5x5( - DF(_QW), KC_PSLS, KC_PAST, KC_PMNS, _______, - KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, _______, - KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, - KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, - KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PENT, _______ - ), - -/* QWERTY - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | ESC | Q | W | E | R | T | Y | U | I | O | P | BACKSP | 7 | 8 | 9 | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | TAB | A | S | D | F | G | H | J | K | L | ; | ' | 4 | 5 | 6 | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | SHIFT | Z | X | C | V | B | N | M | , | . | / | ENT/SFT| 1 | 2 | 3 | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | LCTRL | LGUI | ALT | ALT | NUM | SHIFT | SPACE | DIR | RGUI | RALT | DEL | CTRL | 0 | 0 | . | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_QW] = LAYOUT_ortho_5x15( - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3, - KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC, MO(DIR), KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT - ), - -/* NUMBERS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | NUMLOCK| / | * | - | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | + | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | F11 | F12 | | | | ENTER | SHIFT | RGUI | ./ALT | BKSC | | | | ENTER | - * | | | | | | | | | | |CTRLhold| | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | | | | | | ENTER | SHIFT | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [NUM] = LAYOUT_ortho_5x15( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, KC_PPLS, - _______, KC_F11, KC_F12, _______, _______, _______, KC_ENT, KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, - _______, _______, _______, _______, _______, _______, KC_ENT, KC_RSFT, _______, _______, _______, _______, _______, _______, _______ - ), - -/* DIRECTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | RESET | TAB | up | | INS | CTRL | SHIFT | PgUp | Home | - | = | DEL | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | CAPSLK | left | down | right | PrScr | SHIFT | CTRL | PgDn | End | [ | ] | \ | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | P-Brk | | | | | | | RGUI | ALT | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | KEYPAD | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [DIR] = LAYOUT_ortho_5x15( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RESET, KC_TAB, KC_UP, _______, KC_INS, KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL, KC_DEL, _______, _______, _______, - KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END, KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______, - _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______, - DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/5x5/readme.md b/keyboards/40percentclub/5x5/readme.md deleted file mode 100644 index 8f0d8e16677..00000000000 --- a/keyboards/40percentclub/5x5/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -# 5x5 - -![5x5](https://3.bp.blogspot.com/-bKOfUyMtdrE/WqGA_03kGZI/AAAAAAACPtY/DsHDTQS0IlMD3ie8HHlf1ATRUAwpZdcSgCLcBGAs/s1600/c.jpg) -=== - -**Modular Keypad/Keyboard** -The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side. -5x5, 5x10, and 5x15 matrices are possible. -There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers. -**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._** - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/5x5) - -Keyboard Maintainer: QMK Community -Hardware Supported: 5x5 PCB -Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/2018/04/5x5.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/5x5:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/5x5/rules.mk b/keyboards/40percentclub/5x5/rules.mk deleted file mode 100644 index 237de649770..00000000000 --- a/keyboards/40percentclub/5x5/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_5x5 ortho_5x10 ortho_5x15 diff --git a/keyboards/40percentclub/6lit/6lit.c b/keyboards/40percentclub/6lit/6lit.c deleted file mode 100644 index fd3ae7d0097..00000000000 --- a/keyboards/40percentclub/6lit/6lit.c +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "6lit.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -#ifdef SWAP_HANDS_ENABLE -__attribute__ ((weak)) -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - {{2, 2}, {1, 2}, {0, 2}}, - {{2, 3}, {1, 3}, {0, 3}}, - {{0, 0}, {1, 0}, {2, 0}}, - {{0, 1}, {1, 1}, {2, 1}}, -}; -#endif diff --git a/keyboards/40percentclub/6lit/6lit.h b/keyboards/40percentclub/6lit/6lit.h deleted file mode 100644 index af01d44c2a1..00000000000 --- a/keyboards/40percentclub/6lit/6lit.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -#ifndef FLIP_HALF -#define LAYOUT_ortho_2x6( \ - L00, L01, L02, R00, R01, R02, \ - L10, L11, L12, R10, R11, R12 \ -) { \ - { L00, L01, L02 }, \ - { L10, L11, L12 }, \ - { R02, R01, R00 }, \ - { R12, R11, R10 }, \ -} -#else -#define LAYOUT_ortho_2x6( \ - L00, L01, L02, R00, R01, R02, \ - L10, L11, L12, R10, R11, R12 \ -) { \ - { L00, L01, L02 }, \ - { L10, L11, L12 }, \ - { R00, R01, R02 }, \ - { R10, R11, R12 }, \ -} -#endif - -#define LAYOUT_ortho_2x3( \ - L00, L01, L02, \ - L10, L11, L12 \ -) { \ - { L00, L01, L02 }, \ - { L10, L11, L12 }, \ - { ___, ___, ___ }, \ - { ___, ___, ___ }, \ -} - -#define LAYOUT_macro LAYOUT_ortho_2x3 -#define LAYOUT_split LAYOUT_ortho_2x6 - -#ifdef USE_I2C - #error "I2C not Supported" -#endif diff --git a/keyboards/40percentclub/6lit/config.h b/keyboards/40percentclub/6lit/config.h deleted file mode 100644 index 110362a6287..00000000000 --- a/keyboards/40percentclub/6lit/config.h +++ /dev/null @@ -1,228 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0F61 -#define MANUFACTURER di0ib -#define PRODUCT The 6lit Macropad -#define DESCRIPTION A split 12 key Macropad - -#define USE_SERIAL - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - -/* Select hand configuration */ -#define MASTER_LEFT -//#define MASTER_RIGHT -//#define EE_HANDS - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 2*2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D7, E6 } -#define MATRIX_COL_PINS { F6, F7, B1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/6lit/info.json b/keyboards/40percentclub/6lit/info.json deleted file mode 100644 index ce1a7d6e16c..00000000000 --- a/keyboards/40percentclub/6lit/info.json +++ /dev/null @@ -1,23 +0,0 @@ -{ - "keyboard_name": "6lit", - "url": "", - "maintainer": "qmk", - "width": 6, - "height": 2, - "layouts": { - "LAYOUT_macro": { - "key_count": 6, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1} - ] - }, - "LAYOUT_split": { - "key_count": 12, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1} - ] - } - } -} diff --git a/keyboards/40percentclub/6lit/keymaps/default/config.h b/keyboards/40percentclub/6lit/keymaps/default/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/6lit/keymaps/default/keymap.c b/keyboards/40percentclub/6lit/keymaps/default/keymap.c deleted file mode 100644 index 6864c72f786..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/default/keymap.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_split( /* Base */ - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, \ - KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24 \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/6lit/keymaps/default/readme.md b/keyboards/40percentclub/6lit/keymaps/default/readme.md deleted file mode 100644 index b3acc3f58a9..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default split keymap for 6lit diff --git a/keyboards/40percentclub/6lit/keymaps/macro/config.h b/keyboards/40percentclub/6lit/keymaps/macro/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/macro/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/6lit/keymaps/macro/keymap.c b/keyboards/40percentclub/6lit/keymaps/macro/keymap.c deleted file mode 100644 index 6b10ac1330c..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/macro/keymap.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_macro( /* Base */ - KC_F19, KC_F20, KC_F21, \ - KC_F22, KC_F23, KC_F24 \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/6lit/keymaps/macro/readme.md b/keyboards/40percentclub/6lit/keymaps/macro/readme.md deleted file mode 100644 index 9f883b821c8..00000000000 --- a/keyboards/40percentclub/6lit/keymaps/macro/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default single board macro keymap for 6lit diff --git a/keyboards/40percentclub/6lit/readme.md b/keyboards/40percentclub/6lit/readme.md deleted file mode 100644 index 3d28df2d756..00000000000 --- a/keyboards/40percentclub/6lit/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# 6lit - -![6lit](https://1.bp.blogspot.com/-Pa8RgYZ0hy8/Wbmr4bjuV0I/AAAAAAACDbI/WLKQMDlcDVAVf1lAIRMN51usR1XcCCVNgCLcBGAs/s1600/a.JPG) -=== - -6 key macropad that fits within the 100mm x 100mm PCB size. Can be used singly as a regular 6 key macropad as well. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/6lit) - -Keyboard Maintainer: QMK Community -Hardware Supported: 6lit PCB -Hardware Availability: [6lit project on 40% Keyboards](http://www.40percent.club/2017/09/6lit.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/6lit:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk deleted file mode 100644 index 3275651650c..00000000000 --- a/keyboards/40percentclub/6lit/rules.mk +++ /dev/null @@ -1,83 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -# Enable generic behavior for split boards -SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/foobar/config.h b/keyboards/40percentclub/foobar/config.h deleted file mode 100644 index 15af4ad5bd0..00000000000 --- a/keyboards/40percentclub/foobar/config.h +++ /dev/null @@ -1,228 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0F00 -#define MANUFACTURER di0ib -#define PRODUCT The foobar Keyboard -#define DESCRIPTION A split 30 key keyboard - -#define USE_SERIAL - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - -/* Select hand configuration */ -#define MASTER_LEFT -//#define MASTER_RIGHT -//#define EE_HANDS - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 3*2 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D7, E6, B4 } -#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/foobar/foobar.c b/keyboards/40percentclub/foobar/foobar.c deleted file mode 100644 index c032056a155..00000000000 --- a/keyboards/40percentclub/foobar/foobar.c +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "foobar.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -#ifdef SWAP_HANDS_ENABLE -__attribute__ ((weak)) -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - {{4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, - {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}}, - {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}}, - {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, - {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, - {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, -}; -#endif diff --git a/keyboards/40percentclub/foobar/foobar.h b/keyboards/40percentclub/foobar/foobar.h deleted file mode 100644 index 8cf2e384ffd..00000000000 --- a/keyboards/40percentclub/foobar/foobar.h +++ /dev/null @@ -1,67 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -#ifndef FLIP_HALF -#define LAYOUT_ortho_3x10( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 } \ -} -#else -#define LAYOUT_ortho_3x10( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { R00, R01, R02, R03, R04 }, \ - { R10, R11, R12, R13, R14 }, \ - { R20, R21, R22, R23, R24 } \ -} -#endif - -#define LAYOUT_ortho_3x5( \ - L00, L01, L02, L03, L04, \ - L10, L11, L12, L13, L14, \ - L20, L21, L22, L23, L24 \ -) { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ }, \ - { ___, ___, ___, ___, ___ } \ -} - -#define LAYOUT_macro LAYOUT_ortho_3x5 -#define LAYOUT_split LAYOUT_ortho_3x10 - -#ifdef USE_I2C - #error "I2C not Supported" -#endif diff --git a/keyboards/40percentclub/foobar/info.json b/keyboards/40percentclub/foobar/info.json deleted file mode 100644 index 6d722ae6ee8..00000000000 --- a/keyboards/40percentclub/foobar/info.json +++ /dev/null @@ -1,27 +0,0 @@ -{ - "keyboard_name": "foobar", - "url": "", - "maintainer": "qmk", - "width": 10, - "height": 3, - "layouts": { - "LAYOUT_macro": { - "width": 5, - "height": 3, - "key_count": 15, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, - {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2} - ] - }, - "LAYOUT_split": { - "key_count": 30, - "layout": [ - {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, - {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, - {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2} - ] - } - } -} diff --git a/keyboards/40percentclub/foobar/keymaps/default/config.h b/keyboards/40percentclub/foobar/keymaps/default/config.h deleted file mode 100644 index bedc27ba85e..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/default/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here - -#define PERMISSIVE_HOLD diff --git a/keyboards/40percentclub/foobar/keymaps/default/keymap.c b/keyboards/40percentclub/foobar/keymaps/default/keymap.c deleted file mode 100644 index 1be4b38dd9d..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/default/keymap.c +++ /dev/null @@ -1,91 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -enum foobar_layers { - QWERTY, - FN1, - FN2, - FN3, - FN4, - FN5 -}; - -#define FN1_SPC LT(FN1, KC_SPC) -#define FN2_BSC LT(FN2, KC_BSPC) -#define FN3_C LT(FN3, KC_C) -#define FN4_V LT(FN4, KC_V) -#define FN5_B LT(FN5, KC_B) -#define RALT_N RALT_T(KC_N) -#define LALT_X LALT_T(KC_X) -#define LCTL_Z LCTL_T(KC_Z) -#define RCTL_M RCTL_T(KC_M) -#define LSFT_ENT LSFT_T(KC_ENT) -#define RGUI_ESC RGUI_T(KC_ESC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [QWERTY] = LAYOUT_split( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, RGUI_ESC, - LCTL_Z, LALT_X, FN3_C, FN4_V, FN2_BSC, FN1_SPC, FN5_B, RALT_N, RCTL_M, LSFT_ENT - ), - - [FN1] = LAYOUT_split( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, - _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______ - ), - - [FN2] = LAYOUT_split( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, - KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, KC_GRV, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [FN3] = LAYOUT_split( - _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - KC_TAB, _______, _______, _______, _______, KC_COMM, KC_DOT, KC_SLSH, KC_SCLN, KC_QUOT, - _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - [FN4] = LAYOUT_split( - _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - KC_TAB, _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [FN5] = LAYOUT_split( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/foobar/keymaps/default/readme.md b/keyboards/40percentclub/foobar/keymaps/default/readme.md deleted file mode 100644 index 7113469e7ec..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default split keymap for foobar diff --git a/keyboards/40percentclub/foobar/keymaps/macro/config.h b/keyboards/40percentclub/foobar/keymaps/macro/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/macro/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/foobar/keymaps/macro/keymap.c b/keyboards/40percentclub/foobar/keymaps/macro/keymap.c deleted file mode 100644 index 1e7ec905fda..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/macro/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_macro( /* Base */ - KC_F13, KC_F14, KC_F15, KC_F16, KC_INT1, \ - KC_F17, KC_F18, KC_F19, KC_F20, KC_INT2, \ - KC_F21, KC_F22, KC_F23, KC_F14, KC_INT5 \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/foobar/keymaps/macro/readme.md b/keyboards/40percentclub/foobar/keymaps/macro/readme.md deleted file mode 100644 index 4cc59e7e5d3..00000000000 --- a/keyboards/40percentclub/foobar/keymaps/macro/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default single board macro keymap for foobar diff --git a/keyboards/40percentclub/foobar/readme.md b/keyboards/40percentclub/foobar/readme.md deleted file mode 100644 index 0acdf7252d2..00000000000 --- a/keyboards/40percentclub/foobar/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# foobar - -![foobar](https://2.bp.blogspot.com/-rr8TK6xg2N0/WbwVL2O7EfI/AAAAAAACDc8/209wN69ju0wAFICYYPNLIEGQhat5-5MbwCLcBGAs/s640/a.JPG) -=== - -Split 30% keyboard that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 15 key macropad. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/foobar) - -Keyboard Maintainer: QMK Community -Hardware Supported: foobar PCB -Hardware Availability: [foobar project on 40% Keyboards](http://www.40percent.club/2017/09/foobar-10.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/foobar:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk deleted file mode 100644 index 155a7daacb3..00000000000 --- a/keyboards/40percentclub/foobar/rules.mk +++ /dev/null @@ -1,85 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -# Enable generic behavior for split boards -SPLIT_KEYBOARD = yes - -LAYOUTS = ortho_3x10 diff --git a/keyboards/40percentclub/gherkin/config.h b/keyboards/40percentclub/gherkin/config.h deleted file mode 100644 index 4dc794e347d..00000000000 --- a/keyboards/40percentclub/gherkin/config.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 40 Percent Club -#define PRODUCT Gherkin -#define DESCRIPTION A 30 key ortholinear keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B5 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 0 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/40percentclub/gherkin/gherkin.c b/keyboards/40percentclub/gherkin/gherkin.c deleted file mode 100644 index 2952d842cf6..00000000000 --- a/keyboards/40percentclub/gherkin/gherkin.c +++ /dev/null @@ -1 +0,0 @@ -#include "gherkin.h" diff --git a/keyboards/40percentclub/gherkin/gherkin.h b/keyboards/40percentclub/gherkin/gherkin.h deleted file mode 100644 index 70bffee302a..00000000000 --- a/keyboards/40percentclub/gherkin/gherkin.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_3x10( \ - K00, K01, K02, K03, K04, K05, K10, K11, K12, K13 , \ - K14, K15, K20, K21, K22, K23, K24, K25, K30, K31 , \ - K32, K33, K34, K35, K40, K41, K42, K43, K44, K45 \ -) { \ - { K00, K01, K02, K03, K04, K05 }, \ - { K10, K11, K12, K13, K14, K15 }, \ - { K20, K21, K22, K23, K24, K25 }, \ - { K30, K31, K32, K33, K34, K35 }, \ - { K40, K41, K42, K43, K44, K45 } \ -} diff --git a/keyboards/40percentclub/gherkin/info.json b/keyboards/40percentclub/gherkin/info.json deleted file mode 100644 index 7ebbfb04be6..00000000000 --- a/keyboards/40percentclub/gherkin/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Gherkin", - "url": "", - "maintainer": "qmk", - "width": 10, - "height": 3, - "layouts": { - "LAYOUT_ortho_3x10": { - "key_count": 30, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}] - } - } -} diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md deleted file mode 100644 index 3c9a5e98b37..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md +++ /dev/null @@ -1,11 +0,0 @@ -# Gherkin Layout -This is my gherkin layout. -It is used as a game pad, and key layout is inspired by spare keys I had lying around. -The firmware is very simple, and only includes one layer keymap, and RGB effects. - -# Flashing -The following command should be used from the main qmk directory. -``` -make gherkin:bbaserdem -sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex -``` diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h deleted file mode 100644 index 5c9ca52d750..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h +++ /dev/null @@ -1,9 +0,0 @@ -#pragma once - -#define RGB_DI_PIN F6 -#define RGBLED_NUM 10 -#define RGBLIGHT_ANIMATIONS -#ifdef BACKLIGHT_LEVELS -#undef BACKLIGHT_LEVELS -#endif -#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c deleted file mode 100644 index 0d3c8557c5c..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -// This is a game-pad gherkin layout with RGB and LED lights - -#include QMK_KEYBOARD_H - -backlight_config_t backlight_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Game pad - * ,-----------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | Ctl | Alt | ~ | - * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Tab | Q | W | E | R | T | |^| | ; | ' | / | - * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Shf | A | S | D | F | <-- | |v| | --> | , | . | - * `-----------------------------------------------------------' - */ - LAYOUT_ortho_3x10( - KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LCTRL, KC_LALT, KC_GRAVE, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_UP, KC_SCLN, KC_QUOTE, KC_SLASH, - KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT - ) -}; - -void matrix_init_user(void) { - // Set LED's to max - _delay_us(300); - backlight_config.level = 2; - backlight_config.enable = 1; - eeconfig_update_backlight(backlight_config.raw); - backlight_set(backlight_config.level); - // Set RGB to rainbow mood light - rgblight_enable(); - rgblight_mode(1); - rgblight_sethsv(120,255,255); - rgblight_mode(6); -} diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk deleted file mode 100644 index 07a20a42172..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk +++ /dev/null @@ -1,13 +0,0 @@ -USER_NAME := bbaserdem-nouserspace - -STENO_ENABLE = no # Additional protocols for Stenography(+1700), requires VIRTSER -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -AUDIO_ENABLE = no # Enable audio output from keyboard - -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable RBG light strips -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c deleted file mode 100644 index ae6f1586271..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c +++ /dev/null @@ -1,63 +0,0 @@ -#include QMK_KEYBOARD_H - -#define FN1_Q LT(1, KC_Q) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_ortho_3x10( - FN1_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, - KC_Z, KC_X, KC_C, KC_V, KC_BSPC, KC_SPC, KC_B, KC_N, KC_M, KC_ENT - ), - - [1] = LAYOUT_ortho_3x10( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC, - _______, _______, _______, _______, _______, _______, RESET, _______, _______, BL_DEC - ), - -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h deleted file mode 100644 index 6849bbdd2c9..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h +++ /dev/null @@ -1,10 +0,0 @@ -#pragma once - -#undef RGB_DI_PIN -#undef RGBLED_NUM -#define RGB_DI_PIN D2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c deleted file mode 100644 index 950b6e86b90..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c +++ /dev/null @@ -1,145 +0,0 @@ -#include QMK_KEYBOARD_H - -extern rgblight_config_t rgblight_config; -extern keymap_config_t keymap_config; - -#define _PS 0 // This is the Photoshop Layer -#define _AI 1 // This is the Illustrator Layer -#define _PR 2 // This is the Premier Layer -#define _XD 3 // This is the Experience Design Layer - -enum custom_keycodes { - PS = SAFE_RANGE, - AI, - PR, - MACRO_0, -}; - -#define PS TO(0) -#define AI TO(1) -#define PR TO(2) -#define XD TO(3) - -// Mix of Photoshop, Illustrator, Premiere, and Experience Design shortcuts. -#define SAVE LCTL(KC_S) -#define OPEN LCTL(KC_O) -#define COPY LCTL(KC_C) -#define PAST LCTL(KC_V) -#define CUNDO LCTL(LALT(KC_Z)) -#define INVERT LCTL(LSFT(KC_I)) -#define NLAYER LSFT(LCTL(KC_N)) -#define UNDO LCTL(KC_Z) -#define TRANS LCTL(KC_T) -#define ALIGNL LCTL(LSFT(KC_L)) -#define ALIGNC LCTL(LSFT(KC_C)) -#define ALIGNR LCTL(LSFT(KC_R)) -#define BRINGF LCTL(KC_RBRC) -#define BRINGB LCTL(KC_LBRC) - -// Illustrator layer shortcuts. -#define SHAPE LSFT(KC_M) -#define RULER LCTL(LALT(KC_R)) - -// Premiere layer shortcuts. -#define REDO LCTL(LSFT(KC_Z)) -#define EXPORT LCTL(KC_M) -#define IMPORT LCTL(KC_I) -#define PCOPY LCTL(KC_V) -#define PPASTE LCTL(LSFT(KC_V)) - -// Experience Design layer shortcuts. (can be used with others too.) -#define NEW LCTL(KC_N) -#define LOCK LCTL(KC_L) -#define SYMB LCTL(KC_K) -#define HIDE LCTL(KC_SCLN) -#define REPEAT LCTL(KC_R) -#define MASK LCTL(LSFT(KC_M)) -#define GROUP LCTL(KC_G) -#define UNGRP LCTL(LSFT(KC_G)) -#define VIEW LCTL(KC_TAB) -#define HORZ LSFT(KC_C) -#define VERT LSFT(KC_M) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // Photoshop layer - [_PS] = LAYOUT_ortho_3x10( - SAVE, KC_W, KC_E, KC_T, KC_U, KC_I, KC_P, INVERT, CUNDO, NLAYER, - UNDO, KC_H, KC_L, TRANS, ALIGNL, ALIGNC, ALIGNR, BRINGB, BRINGF, OPEN, - KC_LSFT, COPY, PAST, KC_Z, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, AI - ), - - // Illustrator layer - [_AI] = LAYOUT_ortho_3x10( - _______, MACRO_0, RULER, _______, KC_G, _______, _______, KC_Q, KC_MINS, KC_PLUS, - _______, _______, _______, KC_E, _______, _______, _______, SHAPE, KC_O, OPEN, - _______, _______, _______, _______, _______, _______, _______, KC_M, KC_SLSH, PR - ), - - // Premiere layer - [_PR] = LAYOUT_ortho_3x10( - _______, KC_Q, KC_W, KC_I, KC_O, KC_P, IMPORT, EXPORT, KC_MINS, KC_EQL, - _______, REDO, KC_D, KC_F, KC_H, KC_M, KC_ENT, KC_LBRC, KC_RBRC, OPEN, - _______, PCOPY, PPASTE, KC_SPC, KC_Z, KC_C, KC_V, KC_LEFT, KC_RIGHT, XD - ), - - // Experience Design layer - [_XD] = LAYOUT_ortho_3x10( - _______, KC_E, KC_R, KC_T, KC_P, KC_A, KC_L, KC_V, KC_DEL, NEW, - _______, REDO, GROUP, UNGRP, VIEW, HORZ, VERT, KC_Z, KC_ENT, OPEN, - _______, KC_LCTL, COPY, PAST, SYMB, LOCK, MASK, HIDE, REPEAT, PS - ), - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -void matrix_init_user(void) { - rgblight_enable(); -} - -void matrix_scan_user(void) { - #ifdef RGBLIGHT_ENABLE - - static uint8_t old_layer = 255; - uint8_t new_layer = biton32(layer_state); - - // Color of the Icons. - if (old_layer != new_layer) { - switch (new_layer) { - case _PS: - // #31C5F0 - rgblight_setrgb(49, 197, 240); - break; - case _AI: - // #FF8011 - rgblight_setrgb(255, 128, 17); - break; - case _PR: - // #E788FF - rgblight_setrgb(231, 136, 255); - break; - case _XD: - // #FF2BC2 - rgblight_setrgb(255, 43, 194); - break; - } - old_layer = new_layer; - } - #endif -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case MACRO_0: - // Save for Web Macro. - SEND_STRING(SS_LSFT(SS_LALT(SS_LCTRL("s")))); - return false; - } - } - return true; -}; diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk deleted file mode 100644 index b359ca2874c..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -BACKLIGHT_ENABLE = yes -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/config.h b/keyboards/40percentclub/gherkin/keymaps/mjt/config.h deleted file mode 100644 index 9fe94bcd21e..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/mjt/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#pragma once - -/* USB Device descriptor parameter */ -#undef MANUFACTURER -#undef DESCRIPTION -#define MANUFACTURER Some Guy -#define DESCRIPTION 30 percent disaster diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c deleted file mode 100644 index 2fd4c2a461e..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c +++ /dev/null @@ -1,250 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -extern keymap_config_t keymap_config; - -//Tap Dance Declarations -enum { - TD_Z_LCTL = 0, - TD_X_LGUI = 1, - TD_C_LALT = 2, - TD_A_TAB = 3, - TD_Q_ESC = 4, -}; - -//Friendly Layer Names -enum gherkin_layers { - _QWERTY, - _SONGS, - _NUMBERS, - _SYMBOLS, - _PLOVER, - _ADJUST -}; - -// custom keycodes -enum gherkin_keycodes { - QWERTY = SAFE_RANGE, - NUMBERS, - SYMBOLS, - SONGS, - PLOVER, - BACKLIT, - MACSLEEP, - EXT_PLV -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_ortho_3x10( - TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - TD(TD_A_TAB), LT(_SYMBOLS,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_ADJUST,KC_SPC), - TD(TD_Z_LCTL), TD(TD_X_LGUI), TD(TD_C_LALT), KC_V, KC_B, LT(_NUMBERS, KC_N), KC_M, KC_COMM, KC_DOT, SFT_T(KC_ENT) - ), - [_NUMBERS] = LAYOUT_ortho_3x10( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END , - KC_F7, KC_F8, KC_F9, KC_F10, LT(_ADJUST,KC_F11), _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT - ), - [_SYMBOLS] = LAYOUT_ortho_3x10( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, - KC_GRV, _______, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, KC_MINS, KC_EQL , KC_SCLN, KC_QUOT, - KC_TILD, MO(_ADJUST), XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, KC_UNDS, KC_PLUS, S(KC_SCLN), S(KC_QUOT) - ), - [_PLOVER] = LAYOUT_ortho_3x10( - KC_Q, KC_W, KC_E, KC_R, KC_1, KC_U, KC_I, KC_O, KC_P, KC_LBRC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - EXT_PLV, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX - ), - [_ADJUST] = LAYOUT_ortho_3x10( - RESET, _______, _______, _______, _______, QWERTY, NUMBERS, SYMBOLS, PLOVER, SONGS, - MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, _______, _______, MACSLEEP, _______, - BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float tone_plover[][2] = SONG(PLOVER_SOUND); -float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case NUMBERS: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_dvorak); - #endif - persistant_default_layer_set(1UL<<_NUMBERS); - } - return false; - break; - case SYMBOLS: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_colemak); - #endif - persistant_default_layer_set(1UL<<_SYMBOLS); - } - return false; - break; - case PLOVER: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - stop_all_notes(); - PLAY_SONG(tone_plover); - #endif - layer_off(_NUMBERS); - layer_off(_SYMBOLS); - layer_off(_ADJUST); - layer_on(_PLOVER); - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - keymap_config.raw = eeconfig_read_keymap(); - keymap_config.nkro = 1; - eeconfig_update_keymap(keymap_config.raw); - } - return false; - break; - case EXT_PLV: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_plover_gb); - #endif - layer_off(_PLOVER); - } - return false; - break; - case MACSLEEP: - if (record->event.pressed) { - // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); - register_code(KC_RSFT); - register_code(KC_RCTL); - register_code(KC_POWER); - unregister_code(KC_POWER); - unregister_code(KC_RCTL); - unregister_code(KC_RSFT); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_SONG(tone_startup); -} - -void shutdown_user() -{ - PLAY_SONG(tone_goodbye); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_SONG(music_scale); -} - -#endif - -void matrix_scan_user(void) { -} - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for Esc, twice for Caps Lock - [TD_Z_LCTL] = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL), - [TD_X_LGUI] = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI), - [TD_C_LALT] = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT), - [TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB), - [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) -}; - -// don't know what this is doing... -/* -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} -*/ diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk b/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk deleted file mode 100644 index 3a35ae3b302..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -AUDIO_ENABLE = yes # Audio output on port C6 -TAP_DANCE_ENABLE = yes diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/config.h b/keyboards/40percentclub/gherkin/keymaps/steno/config.h deleted file mode 100644 index 20a8f7844a9..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/steno/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#pragma once - -#define NO_ACTION_LAYER -#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c b/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c deleted file mode 100644 index c7ee63d1269..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c +++ /dev/null @@ -1,13 +0,0 @@ -#include QMK_KEYBOARD_H -#include "keymap_steno.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ortho_3x10( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , - STN_NUM, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, STN_NUM), -}; - -void matrix_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT -} \ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/readme.md b/keyboards/40percentclub/gherkin/keymaps/steno/readme.md deleted file mode 100644 index 6536ed7aba4..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/steno/readme.md +++ /dev/null @@ -1,9 +0,0 @@ -# Gherkin Steno - -This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could). - -> Note: The number bar has been moved to the bottom row in all the left-over spaces. - - | S | T | P | H | * | F | P | L | T | D | - | S | K | W | R | * | R | B | G | S | Z | - | # | # | A | O | # | E | U | # | # | # | diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk b/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk deleted file mode 100644 index a6e76f7cf94..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk +++ /dev/null @@ -1,12 +0,0 @@ -STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c deleted file mode 100644 index ca3da579a13..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c +++ /dev/null @@ -1,56 +0,0 @@ -#include QMK_KEYBOARD_H -#include "keymap_steno.h" - -#define ST_BOLT QK_STENO_BOLT -#define ST_GEM QK_STENO_GEMINI - -enum keyboard_layers { - _QWERTY, - _RAISE, - _LOWER, - _PLOVER, - _ADJUST -}; - -#define ADJ_Z LT(_ADJUST, KC_Z) -#define RS_BSPC LT(_RAISE, KC_BSPC) -#define LW_SPC LT(_LOWER, KC_SPC) -#define MO_ADJ MO(_ADJUST) -#define TG_PLV TG(_PLOVER) -#define OS_LCTL OSM(MOD_LCTL) -#define OS_LALT OSM(MOD_LALT) -#define OS_LGUI OSM(MOD_LGUI) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_ortho_3x10( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, - ADJ_Z, KC_X, KC_C, KC_V, RS_BSPC, LW_SPC, KC_B, KC_N, KC_M, KC_ENT - ), - - [_RAISE] = LAYOUT_ortho_3x10( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_7, KC_9, KC_0, - KC_ESC, KC_MINS, KC_EQL, _______, KC_LBRC, KC_RBRC, _______, KC_QUOT, KC_SCLN, _______, - OS_LCTL, OS_LGUI, OS_LALT, KC_GRV, _______, KC_TAB, KC_BSLS, KC_COMM, KC_DOT, KC_SLSH - ), - - [_LOWER] = LAYOUT_ortho_3x10( - KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, - KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, - KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, OS_LALT, OS_LGUI, OS_LCTL, KC_CAPS - ), - - [_PLOVER] = LAYOUT_ortho_3x10( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, - MO_ADJ, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, XXXXXXX - ), - - [_ADJUST] = LAYOUT_ortho_3x10( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ST_BOLT, ST_GEM, TG_PLV, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET - ), - -}; diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk deleted file mode 100644 index a64c606ae75..00000000000 --- a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER diff --git a/keyboards/40percentclub/gherkin/readme.md b/keyboards/40percentclub/gherkin/readme.md deleted file mode 100644 index a6680d72057..00000000000 --- a/keyboards/40percentclub/gherkin/readme.md +++ /dev/null @@ -1,21 +0,0 @@ -# Gherkin - -![Gherkin](https://4.bp.blogspot.com/-sQ18-lNZXOc/WCzlTde-4PI/AAAAAAAB_JQ/qQrehAMG6DMKf3i4oj4mkmLGOfTUvb3KgCLcB/s640/IMG_20161116_122926.jpg) -=== - -A 30 key keyboard. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin) - -Keyboard Maintainer: QMK Community -Hardware Supported: Gherkin PCB -Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/gherkin:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -First pass at adding support for the gherkin keyboard. Compiles but completely -untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/gherkin/rules.mk b/keyboards/40percentclub/gherkin/rules.mk deleted file mode 100644 index 1e0b346417f..00000000000 --- a/keyboards/40percentclub/gherkin/rules.mk +++ /dev/null @@ -1,74 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no - -LAYOUTS = ortho_3x10 diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h deleted file mode 100644 index cd7515f0bac..00000000000 --- a/keyboards/40percentclub/half_n_half/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 Boy_314 - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x4A1F -#define MANUFACTURER di0ib -#define PRODUCT half_n_half -#define DESCRIPTION A small split ortholinear custom keyboard with 2 thumb buttons - -/* key matrix size */ -#define MATRIX_ROWS 4*2 -#define MATRIX_COLS 7 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D4, C6, D7, E6 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -#define USE_SERIAL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/40percentclub/half_n_half/half_n_half.c b/keyboards/40percentclub/half_n_half/half_n_half.c deleted file mode 100644 index c4e6a4ce079..00000000000 --- a/keyboards/40percentclub/half_n_half/half_n_half.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 Boy_314 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "half_n_half.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/half_n_half/half_n_half.h b/keyboards/40percentclub/half_n_half/half_n_half.h deleted file mode 100644 index bc330c9cb7b..00000000000 --- a/keyboards/40percentclub/half_n_half/half_n_half.h +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2019 Boy_314 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ - L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ - L34, R32 \ -) { \ - { L00, L01, L02, L03, L04, L05, L06 }, \ - { L10, L11, L12, L13, L14, L15, L16 }, \ - { L20, L21, L22, L23, L24, L25, L26 }, \ - { ___, ___, ___, ___, L34, ___, ___ }, \ -\ - { R06, R05, R04, R03, R02, R01, R00 }, \ - { R16, R15, R14, R13, R12, R11, R10 }, \ - { R26, R25, R24, R23, R22, R21, R20 }, \ - { ___, ___, ___, ___, R32, ___, ___ } \ -} - -#ifdef USE_I2C - #error "I2C not Supported" -#endif diff --git a/keyboards/40percentclub/half_n_half/info.json b/keyboards/40percentclub/half_n_half/info.json deleted file mode 100644 index e791e36c68a..00000000000 --- a/keyboards/40percentclub/half_n_half/info.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "keyboard_name": "half_n_half", - "url": "", - "maintainer": "qmk", - "width": 14, - "height": 4, - "layouts": { - "LAYOUT": { - "key_count": 44, - "layout": [ - {"label":"L00", "x":0, "y":0}, - {"label":"L01", "x":1, "y":0}, - {"label":"L02", "x":2, "y":0}, - {"label":"L03", "x":3, "y":0}, - {"label":"L04", "x":4, "y":0}, - {"label":"L05", "x":5, "y":0}, - {"label":"L06", "x":6, "y":0}, - {"label":"R00", "x":7, "y":0}, - {"label":"R01", "x":8, "y":0}, - {"label":"R02", "x":9, "y":0}, - {"label":"R03", "x":10, "y":0}, - {"label":"R04", "x":11, "y":0}, - {"label":"R05", "x":12, "y":0}, - {"label":"R06", "x":13, "y":0}, - - {"label":"L10", "x":0, "y":1}, - {"label":"L11", "x":1, "y":1}, - {"label":"L12", "x":2, "y":1}, - {"label":"L13", "x":3, "y":1}, - {"label":"L14", "x":4, "y":1}, - {"label":"L15", "x":5, "y":1}, - {"label":"L16", "x":6, "y":1}, - {"label":"R10", "x":7, "y":1}, - {"label":"R11", "x":8, "y":1}, - {"label":"R12", "x":9, "y":1}, - {"label":"R13", "x":10, "y":1}, - {"label":"R14", "x":11, "y":1}, - {"label":"R15", "x":12, "y":1}, - {"label":"R16", "x":13, "y":1}, - - {"label":"L20", "x":0, "y":2}, - {"label":"L21", "x":1, "y":2}, - {"label":"L22", "x":2, "y":2}, - {"label":"L23", "x":3, "y":2}, - {"label":"L24", "x":4, "y":2}, - {"label":"L25", "x":5, "y":2}, - {"label":"L26", "x":6, "y":2}, - {"label":"R20", "x":7, "y":2}, - {"label":"R21", "x":8, "y":2}, - {"label":"R22", "x":9, "y":2}, - {"label":"R23", "x":10, "y":2}, - {"label":"R24", "x":11, "y":2}, - {"label":"R25", "x":12, "y":2}, - {"label":"R26", "x":13, "y":2}, - - {"label":"L34", "x":4, "y":3, "w":2}, - {"label":"R32", "x":8, "y":3, "w":2} - ] - } - } -} - \ No newline at end of file diff --git a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/config.h b/keyboards/40percentclub/half_n_half/keymaps/Boy_314/config.h deleted file mode 100644 index f73fd055cc2..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2019 Boy_314 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here -#define IGNORE_MOD_TAP_INTERRUPT -#define PERMISSIVE_HOLD -#define TAPPING_TERM 200 diff --git a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c b/keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c deleted file mode 100644 index 2eef3dc48b8..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c +++ /dev/null @@ -1,173 +0,0 @@ -/* Copyright 2019 Boy_314 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Tap Dance Declarations -enum { - TD_SWAP_LAYERS = 0 -}; - -enum layers { - _DVORAK, - _QWERTY, - _LOWER, - _RAISE, -}; - -enum halfnhalf_keycodes { - NEWTAB = SAFE_RANGE, - ALTF4, - CLSTAB, - PRVWIN, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* DVORAK - * ,-------------------------------------------------------------------------------------------------. - * |Tab |' |, |. |P |Y |Brght+|= |F |G |C |R |L |Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |CtlCps|A |O |E |U |I |Brght-|Ctrl+F|D |H |T |N |S |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |LShift|; |Q |J |K |X |LAlt |- |B |M |W |V |Z |RShift| - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |TD Swap Layer| |Space | - * `-------------' `-------------' - */ - [_DVORAK] = LAYOUT(/* Base Dvorak */ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BRIU, KC_EQL, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, - LCTL_T(KC_CAPS), KC_A, KC_O, KC_E, KC_U, KC_I, KC_BRID, LCTL(KC_F), KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT, - KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LALT, KC_MINS, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, - TD(TD_SWAP_LAYERS), KC_SPC - ), - - /* QWERTY - * ,-------------------------------------------------------------------------------------------------. - * |Tab |Q |W |E |R |T |Brght+|' |Y |U |I |O |P |Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |CtlCps|A |S |D |F |G |Brght-|Ctrl+F|H |J |K |L |; |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |LShift|Z |X |C |V |B |LAlt |- |N |M |, |. |/ |RShift| - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |TD Swap Layer| |Space | - * `-------------' `-------------' - */ - [_QWERTY] = LAYOUT(/* Base Qwerty */ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BRIU, KC_QUOT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LCTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BRID, LCTL(KC_F), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_MINS, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, - TD(TD_SWAP_LAYERS), KC_SPC - ), - - /* LOWER - * ,-------------------------------------------------------------------------------------------------. - * |Esc |1 |2 |3 |4 |5 | | |6 |7 |8 |9 |0 |/ | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |Caps |F1 |F2 |F3 |F4 |F5 |F6 |Vol Up|Play |_ |+ |{ |} || | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |F7 |F8 |F9 |F10 |F11 |F12 |Vol Dn|Next |Home |PgDn |PgUp |End | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | - * `-------------' `-------------' - */ - [_LOWER] = LAYOUT(/* Numbers, Function Row, Media Control, Shifted Symbols, Dvorak Slash Key */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLSH, - KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_VOLU, KC_MPLY, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_MNXT, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, - KC_TRNS, KC_TRNS - ), - - /* RAISE - * ,-------------------------------------------------------------------------------------------------. - * |Reset | | |Up | | | |PRVWIN|CLSTAB| | | | |Del | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |` | |Left |Down |Right | | |NEWTAB|ALTF4 |- |= |[ |] |\ | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |! |@ |# |$ |% | | |^ |& |* |( |) | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | - * `-------------' `-------------' - */ - [_RAISE] = LAYOUT(/* Arrows, Shifted Numbers, Symbols, Delete, Macros */ - RESET, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, PRVWIN, CLSTAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, - KC_GRV, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, NEWTAB, ALTF4, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, - KC_TRNS, KC_TRNS - ) -}; - -void tap_dance_choose_layer (qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 1: - layer_on(_LOWER); - break; - case 2: - layer_on(_RAISE); - break; - } -} - -void tap_dance_choose_layer_reset (qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 1: - layer_off(_LOWER); - break; - case 2: - layer_off(_RAISE); - break; - case 3: - if (biton32(default_layer_state) == _DVORAK) { - set_single_persistent_default_layer(_QWERTY); - } - else if (biton32(default_layer_state) == _QWERTY) { - set_single_persistent_default_layer(_DVORAK); - } - break; - } -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_SWAP_LAYERS] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tap_dance_choose_layer, tap_dance_choose_layer_reset) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - // Control + T - case NEWTAB: - if (record->event.pressed) { - SEND_STRING(SS_LCTRL("t")); - } - break; - // Alt + F4 - case ALTF4: - if (record->event.pressed) { - SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_F4)SS_UP(X_LALT)); - } - break; - // Control + W - case CLSTAB: - if (record->event.pressed) { - SEND_STRING(SS_LCTRL("w")); - } - break; - // Control + Shift + N - case PRVWIN: - if (record->event.pressed) { - SEND_STRING(SS_LCTRL(SS_LSFT("n"))); - } - break; - } - return true; -} diff --git a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/readme.md b/keyboards/40percentclub/half_n_half/keymaps/Boy_314/readme.md deleted file mode 100644 index 9eff08b5ea4..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# Boy_314's keymap for half_n_half -# Currently only supports DVORAK. QWERTY Support is on the TODO list. \ No newline at end of file diff --git a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/rules.mk b/keyboards/40percentclub/half_n_half/keymaps/Boy_314/rules.mk deleted file mode 100644 index 59c7ccf8275..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/Boy_314/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -TAP_DANCE_ENABLE = yes # Enable Tap Dance -NKRO_ENABLE = yes # USB Nkey Rollover - -# Enable generic behavior for split boards -SPLIT_KEYBOARD = yes \ No newline at end of file diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/config.h b/keyboards/40percentclub/half_n_half/keymaps/default/config.h deleted file mode 100644 index c8e4334124e..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 REPLACE_WITH_YOUR_NAME - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c b/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c deleted file mode 100644 index 2ab9a8c982f..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/default/keymap.c +++ /dev/null @@ -1,65 +0,0 @@ -/* Copyright 2019 Boy_314 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_RALT, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_APP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - KC_SPC, KC_SPC - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/half_n_half/keymaps/default/readme.md b/keyboards/40percentclub/half_n_half/keymaps/default/readme.md deleted file mode 100644 index 58a457f1bc8..00000000000 --- a/keyboards/40percentclub/half_n_half/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for half_n_half \ No newline at end of file diff --git a/keyboards/40percentclub/half_n_half/readme.md b/keyboards/40percentclub/half_n_half/readme.md deleted file mode 100644 index 689b6fe816e..00000000000 --- a/keyboards/40percentclub/half_n_half/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# half_n_half - -![half_n_half](https://2.bp.blogspot.com/-akouSRzGKQw/WutIH4qV0nI/AAAAAAACRqA/D1Gx3i1UWlccMCd0VS8td0ckWjCixrSuQCLcBGAs/s1600/b.jpg) - -A small split ortho board with two thumb keys - -Keyboard Maintainer: [Boy_314](https://github.com/boy-314) -Hardware Availability: http://www.40percent.club/2018/07/half-n-half.html - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/half_n_half:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk deleted file mode 100644 index cc5fccee984..00000000000 --- a/keyboards/40percentclub/half_n_half/rules.mk +++ /dev/null @@ -1,84 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -# Enable generic behavior for split boards -SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/i75/config.h b/keyboards/40percentclub/i75/config.h deleted file mode 100644 index f9b5d57ddf0..00000000000 --- a/keyboards/40percentclub/i75/config.h +++ /dev/null @@ -1,187 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0175 -#define MANUFACTURER di0ib -#define PRODUCT i75 -#define DESCRIPTION i75 15x5 ortholinear keyboard - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/40percentclub/i75/i75.c b/keyboards/40percentclub/i75/i75.c deleted file mode 100644 index 7efe3b4549f..00000000000 --- a/keyboards/40percentclub/i75/i75.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "i75.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/i75/i75.h b/keyboards/40percentclub/i75/i75.h deleted file mode 100644 index a31c9f6e6ff..00000000000 --- a/keyboards/40percentclub/i75/i75.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -#ifdef KEYBOARD_40percentclub_i75_promicro - #include "promicro.h" -#elif KEYBOARD_40percentclub_i75_teensy2 - #include "teensy2.h" -#endif diff --git a/keyboards/40percentclub/i75/info.json b/keyboards/40percentclub/i75/info.json deleted file mode 100644 index 033bf02bcc5..00000000000 --- a/keyboards/40percentclub/i75/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "i75", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_ortho_5x15": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}] - } - } -} diff --git a/keyboards/40percentclub/i75/keymaps/default/config.h b/keyboards/40percentclub/i75/keymaps/default/config.h deleted file mode 100644 index 6173b63272f..00000000000 --- a/keyboards/40percentclub/i75/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/i75/keymaps/default/keymap.c b/keyboards/40percentclub/i75/keymaps/default/keymap.c deleted file mode 100644 index 3054f8ebe5e..00000000000 --- a/keyboards/40percentclub/i75/keymaps/default/keymap.c +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_5x15( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/i75/keymaps/default/readme.md b/keyboards/40percentclub/i75/keymaps/default/readme.md deleted file mode 100644 index 4d054181fb6..00000000000 --- a/keyboards/40percentclub/i75/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for i75 diff --git a/keyboards/40percentclub/i75/promicro/config.h b/keyboards/40percentclub/i75/promicro/config.h deleted file mode 100644 index d4cd9977362..00000000000 --- a/keyboards/40percentclub/i75/promicro/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 9 -#define MATRIX_COLS 9 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B4, E6, D7, C6, D4, D0, D1, D2, D3 } -#define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/40percentclub/i75/promicro/promicro.c b/keyboards/40percentclub/i75/promicro/promicro.c deleted file mode 100644 index 28684e7144d..00000000000 --- a/keyboards/40percentclub/i75/promicro/promicro.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "i75.h" diff --git a/keyboards/40percentclub/i75/promicro/promicro.h b/keyboards/40percentclub/i75/promicro/promicro.h deleted file mode 100644 index 29394855a68..00000000000 --- a/keyboards/40percentclub/i75/promicro/promicro.h +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "i75.h" -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_5x15( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, \ - K16, K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, \ - K33, K34, K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, K64, K65, \ - K66, K67, K68, K70, K71, K72, K73, K74, K75, K76, K77, K78, K80, K81, K82 \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77, K78 }, \ - { K80, K81, K82 } \ -} diff --git a/keyboards/40percentclub/i75/promicro/rules.mk b/keyboards/40percentclub/i75/promicro/rules.mk deleted file mode 100644 index dc6f1962373..00000000000 --- a/keyboards/40percentclub/i75/promicro/rules.mk +++ /dev/null @@ -1,58 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 diff --git a/keyboards/40percentclub/i75/readme.md b/keyboards/40percentclub/i75/readme.md deleted file mode 100644 index 9bdad68ada4..00000000000 --- a/keyboards/40percentclub/i75/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -# i75 - -![i75](https://1.bp.blogspot.com/-eRSwPnvgliI/WCYQ-aYihoI/AAAAAAAB_Bc/a7i1Envc1FYiEHeqvyHw80VxTAnafDsPgCLcB/s320/IMG_20161003_084555.jpg) -=== - -5x15 grid layout, multiple controllers supported -- Pro Micro -- PJRC Teensy 2.0 -- PJRC Teensy LC/3.2 (**NB: Not currently ported**) - -The matrix is a 9x9 grid. This uses all of the available pins on the Pro Micro. The other controllers have pins left over. The serial pins and pins connected to LEDs were avoided if possible. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/i75_ProMicro) - -Keyboard Maintainer: QMK Community -Hardware Supported: i75 PCB -Hardware Availability: [i75 project on 40% Keyboards](http://www.40percent.club/2016/11/i75.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/i75:default - -If you would like to use one of the alternative controllers: - - make 40percentclub/i75/promicro:default - make 40percentclub/i75/teensy2:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk deleted file mode 100644 index 6f79143a18b..00000000000 --- a/keyboards/40percentclub/i75/rules.mk +++ /dev/null @@ -1,23 +0,0 @@ -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_5x15 -DEFAULT_FOLDER = 40percentclub/i75/promicro diff --git a/keyboards/40percentclub/i75/teensy2/config.h b/keyboards/40percentclub/i75/teensy2/config.h deleted file mode 100644 index bcf9b1b888b..00000000000 --- a/keyboards/40percentclub/i75/teensy2/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 9 -#define MATRIX_COLS 9 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D2, D1, D0, B7, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { C6, C7, D6, D7, B5, B6, F7, F6, F5 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/40percentclub/i75/teensy2/rules.mk b/keyboards/40percentclub/i75/teensy2/rules.mk deleted file mode 100644 index 3fb7c7e5a7e..00000000000 --- a/keyboards/40percentclub/i75/teensy2/rules.mk +++ /dev/null @@ -1,58 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = halfkay - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 diff --git a/keyboards/40percentclub/i75/teensy2/teensy2.c b/keyboards/40percentclub/i75/teensy2/teensy2.c deleted file mode 100644 index 28684e7144d..00000000000 --- a/keyboards/40percentclub/i75/teensy2/teensy2.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "i75.h" diff --git a/keyboards/40percentclub/i75/teensy2/teensy2.h b/keyboards/40percentclub/i75/teensy2/teensy2.h deleted file mode 100644 index 29394855a68..00000000000 --- a/keyboards/40percentclub/i75/teensy2/teensy2.h +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "i75.h" -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_5x15( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, \ - K16, K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, \ - K33, K34, K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, K64, K65, \ - K66, K67, K68, K70, K71, K72, K73, K74, K75, K76, K77, K78, K80, K81, K82 \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77, K78 }, \ - { K80, K81, K82 } \ -} diff --git a/keyboards/40percentclub/luddite/config.h b/keyboards/40percentclub/luddite/config.h deleted file mode 100644 index 36bda061439..00000000000 --- a/keyboards/40percentclub/luddite/config.h +++ /dev/null @@ -1,43 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x1001 -#define MANUFACTURER di0ib -#define PRODUCT Luddite -#define DESCRIPTION Luddite Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4, C6, D7, E6 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } -#define UNUSED_PINS - -/* number of backlight levels */ -#define BACKLIGHT_PIN B5 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 4 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGB_DI_PIN B4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -// #define RGBLIGHT_HUE_STEP 10 -// #define RGBLIGHT_SAT_STEP 17 -// #define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/40percentclub/luddite/info.json b/keyboards/40percentclub/luddite/info.json deleted file mode 100644 index e3c5fa9f9de..00000000000 --- a/keyboards/40percentclub/luddite/info.json +++ /dev/null @@ -1,74 +0,0 @@ -{ - "keyboard_name": "Luddite", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_ansi": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"\\", "x":13.5, "y":1, "w":1.5}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":2.75}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - {"label":"GUI", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"label":"Space", "x":3.75, "y":4, "w":6.25}, - {"label":"Alt", "x":10, "y":4, "w":1.25}, - {"label":"GUI", "x":11.25, "y":4, "w":1.25}, - {"label":"Menu", "x":12.5, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} - ] - } - } -} diff --git a/keyboards/40percentclub/luddite/keymaps/default/keymap.c b/keyboards/40percentclub/luddite/keymaps/default/keymap.c deleted file mode 100644 index 4d6ae0d524e..00000000000 --- a/keyboards/40percentclub/luddite/keymaps/default/keymap.c +++ /dev/null @@ -1,32 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_60_ansi( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL , KC_LGUI , KC_LALT , KC_SPC , KC_RALT , KC_RGUI , MO(_FN1) , KC_RCTL - ), - - [_FN1] = LAYOUT_60_ansi( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, \ - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_GRV, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/40percentclub/luddite/luddite.c b/keyboards/40percentclub/luddite/luddite.c deleted file mode 100644 index 3e720ad571c..00000000000 --- a/keyboards/40percentclub/luddite/luddite.c +++ /dev/null @@ -1 +0,0 @@ -#include "luddite.h" diff --git a/keyboards/40percentclub/luddite/luddite.h b/keyboards/40percentclub/luddite/luddite.h deleted file mode 100644 index 1ba743e9e77..00000000000 --- a/keyboards/40percentclub/luddite/luddite.h +++ /dev/null @@ -1,21 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K10, K11, K12, K13, K14, K15, \ - K16, K17, K20, K21, K22, K23, K24, K25, K26, K27, K30, K31, K32, K33, \ - K34, K35, K36, K37, K40, K41, K42, K43, K44, K45, K46, K47, K50, \ - K51, K52, K53, K54, K55, K56, K57, K60, K61, K62, K63, K64, \ - K65, K66, K67, K70, K71, K72, K73, K74\ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K70, K71, K72, K73, K74 }, \ -} - diff --git a/keyboards/40percentclub/luddite/readme.md b/keyboards/40percentclub/luddite/readme.md deleted file mode 100644 index 928b6de8f3f..00000000000 --- a/keyboards/40percentclub/luddite/readme.md +++ /dev/null @@ -1,21 +0,0 @@ -# Luddite - -![Luddite](https://1.bp.blogspot.com/-GAAa-sMU_WU/W7uYLJJ8x1I/AAAAAAACS44/31n2z69BSboM4KT48YkNMJRYciC8LUMWgCLcBGAs/s640/a.jpg) -=== - -Luddite 60% keyboard with backlight and RGB underglow. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/luddite) - -Keyboard Maintainer: QMK Community -Hardware Supported: Luddite PCB -Hardware Availability: [Luddite project on 40% Keyboards](http://www.40percent.club/search/label/luddite) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/luddite:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -First pass at adding support for the luddite keyboard. Compiles but completely -untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/luddite/rules.mk b/keyboards/40percentclub/luddite/rules.mk deleted file mode 100644 index 8dff21f9ab7..00000000000 --- a/keyboards/40percentclub/luddite/rules.mk +++ /dev/null @@ -1,74 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes - -LAYOUTS = 60_ansi diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h deleted file mode 100644 index 5bda9bb7864..00000000000 --- a/keyboards/40percentclub/mf68/config.h +++ /dev/null @@ -1,175 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x0510 -#define DEVICE_VER 0x0101 -#define MANUFACTURER di0ib -#define PRODUCT MF68 -#define DESCRIPTION Magicforce 68 with programmable PCB replacement - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 9 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } -#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B5 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/40percentclub/mf68/info.json b/keyboards/40percentclub/mf68/info.json deleted file mode 100644 index fae15aaf5fb..00000000000 --- a/keyboards/40percentclub/mf68/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "MF68", - "url": "", - "maintainer": "qmk", - "width": 17.25, - "height": 5, - "layouts": { - "LAYOUT_68_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}] - } - } -} diff --git a/keyboards/40percentclub/mf68/keymaps/68keys/config.h b/keyboards/40percentclub/mf68/keymaps/68keys/config.h deleted file mode 100644 index a0a576b7bfa..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/68keys/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -/* USB Device descriptor parameter */ -#undef VENDOR_ID -#undef PRODUCT_ID -#undef DEVICE_VER -#undef MANUFACTURER -#undef PRODUCT -#undef DESCRIPTION -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0068 -#define MANUFACTURER 68Keys.io -#define PRODUCT The 68Keys.io Keyboard -#define DESCRIPTION A 68 keys mechanical keyboard diff --git a/keyboards/40percentclub/mf68/keymaps/68keys/keymap.c b/keyboards/40percentclub/mf68/keymaps/68keys/keymap.c deleted file mode 100644 index 3778ea21e79..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/68keys/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_68_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, - KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ) -}; diff --git a/keyboards/40percentclub/mf68/keymaps/68keys/readme.md b/keyboards/40percentclub/mf68/keymaps/68keys/readme.md deleted file mode 100644 index 4b7cdf12591..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/68keys/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# 68Keys.io - -Custom [68Keys.io](https://68keys.io) DIY keyboard. - -Keymap Maintainer: [sbstjn](https://sbstjn.com) -Hardware Supported: mf68 -Hardware Availability: [DIY Guide](https://68keys.io) - -Make example for this keyboard (after setting up your build environment): - -```bash -$ > cd qmk_firmware/ -$ > make 40percentclub/mf68:68keys -``` - -Example of flashing this keyboard: - -```bash -$ > cd qmk_firmware/ -$ > make 40percentclub/mf68:68keys:avrdude -``` - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/mf68/keymaps/68keys/rules.mk b/keyboards/40percentclub/mf68/keymaps/68keys/rules.mk deleted file mode 100644 index 96ce13fe73f..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/68keys/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -BOOTLOADER = atmel-dfu - -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -BACKLIGHT_ENABLE = no diff --git a/keyboards/40percentclub/mf68/keymaps/default/keymap.c b/keyboards/40percentclub/mf68/keymaps/default/keymap.c deleted file mode 100644 index c91b9b908ab..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/default/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _QWERTY 0 -#define _FN1 1 -#define _FN2 2 - -#define FN2_GRV LT(_FN2, KC_GRV) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_68_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, - FN2_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [_FN1] = LAYOUT_68_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_VOLU, KC_HOME, - _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, _______, KC_VOLD, KC_END, - _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, _______, _______, KC_MUTE, - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT - ), - [_FN2] = LAYOUT_68_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_VOLU, KC_HOME, - _______, _______, _______, KC_UP, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, KC_VOLD, KC_END, - _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, - _______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, _______, _______, KC_MUTE, - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT - ) -}; diff --git a/keyboards/40percentclub/mf68/keymaps/factory/keymap.c b/keyboards/40percentclub/mf68/keymaps/factory/keymap.c deleted file mode 100644 index 12032350cd4..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/factory/keymap.c +++ /dev/null @@ -1,59 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _QWERTY 0 -#define _FN1 1 -#define _FN2 2 -#define KC_ KC_TRNS -#define KC_X0 LT(_FN2, KC_CAPS) -#define KC_X1 MO(_FN1) -#define KC_X2 BL_STEP -#define KC_X3 BL_BRTG -#define KC_X4 BL_TOGG -#define KC_X5 BL_INC -#define KC_X6 BL_DEC - - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP, - /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */ - TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN, - /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */ - X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , - /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */ - LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP , - /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */ - LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT - /*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */ - ), - - [_FN1] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , ,HOME, - /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ - , , UP , , , , , , ,PSCR,SLCK,PAUS, X2 , , ,END, - /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ - X0 ,LEFT,DOWN,RGHT, , X6 , X5 , X4 , X3 , X2 ,HOME, , , - /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ - , ,MPLY,MSTP,MPRV,MNXT,VOLD,VOLU,MUTE, ,END , , X5 , - /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ - , , , , , , , X3 , X6 , X4 - /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ - ), - - [_FN2] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, - /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ - , , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END, - /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ - , ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , , - /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ - , , , , , , 0 , 1 , 2 , 3 , , , MUTE, - /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ - , , , , , , , MPRV,MPLY,MNXT - /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ - ) -}; diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h b/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h deleted file mode 100644 index 7d96ab9e249..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* Overrides for Feather 32u4 Bluefruit */ - -/* USB Device descriptor parameter */ -#undef DESCRIPTION -#define DESCRIPTION Magicforce 68 BLE - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#undef MATRIX_ROW_PINS -#undef MATRIX_COL_PINS -#undef UNUSED_PINS -#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 } -#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 } -#define UNUSED_PINS {B5} diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/keymap.c b/keyboards/40percentclub/mf68/keymaps/mf68_ble/keymap.c deleted file mode 100644 index ae7e7297cb8..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/mf68_ble/keymap.c +++ /dev/null @@ -1,53 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _QWERTY 0 -#define _FN1 1 -#define _FN2 2 -#define KC_ KC_TRNS -#define KC_X0 LT(_FN2, KC_GRV) -#define KC_X1 MO(_FN1) -#define KC_X2 BL_STEP - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP, - /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */ - TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN, - /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */ - X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , - /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */ - LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP , - /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */ - LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT - /*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */ - ), - - [_FN1] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, - /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ - , , , UP , , , , , , , , , X2 , , VOLD,END, - /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ - , ,LEFT,DOWN,RGHT, , , , , , , , , - /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ - , , , , , , ,MUTE, , , , , MUTE, - /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ - , , , , , , , MPRV,MPLY,MNXT - /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ - ), - - [_FN2] = LAYOUT_kc( - /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ - GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, - /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ - , , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END, - /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ - , ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , , - /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ - , , , , , , 0 , 1 , 2 , 3 , , , MUTE, - /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ - , , , , , , , MPRV,MPLY,MNXT - /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ - ) -}; diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md b/keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md deleted file mode 100644 index e590ae3e6db..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md +++ /dev/null @@ -1,29 +0,0 @@ -# mf68_ble - -![mf68_ble](https://i.imgur.com/zuTyy7k.jpg) -=== - -Magicforce 68 with [replacement PCB](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) designed by [di0ib](https://github.com/di0ib). - -Keyboard Maintainer: QMK Community -Hardware Supported: [Feather 32u4 Bluefruit](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/) -Please note: This is 32u4 and not M0 -Hardware Availability: [PCB files](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68/pcb) -[MF68 thicc case files](https://github.com/harshitgoel96/mf68-case-thicc) -Story ------ - -The story and the idea behind this mod is available on [my reddit post](https://www.reddit.com/r/MechanicalKeyboards/comments/7eiiht/guide_i_built_a_bluetooth_enabled_magicforce68_no/) - -Wiring ------- - -Below is how you wire the Feather to PCB - -![wire map](https://i.imgur.com/zYOjlTA.png) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/mf68:mf68_ble - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk b/keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk deleted file mode 100644 index 2509d0bf4eb..00000000000 --- a/keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ -# Overrides for Feather 32u4 Bluefruit -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 8000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BLUETOOTH = AdafruitBLE -BACKLIGHT_ENABLE = no diff --git a/keyboards/40percentclub/mf68/mf68.c b/keyboards/40percentclub/mf68/mf68.c deleted file mode 100644 index 1da522e7e18..00000000000 --- a/keyboards/40percentclub/mf68/mf68.c +++ /dev/null @@ -1,8 +0,0 @@ -#include "mf68.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} diff --git a/keyboards/40percentclub/mf68/mf68.h b/keyboards/40percentclub/mf68/mf68.h deleted file mode 100644 index a34f9cde8de..00000000000 --- a/keyboards/40percentclub/mf68/mf68.h +++ /dev/null @@ -1,37 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_68_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \ - K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \ - K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, \ - K64, K65, K66, K67, K68, K70, K71, K72, K73, K74 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \ - { K70, K71, K72, K73, K74 } \ -} - -#define LAYOUT_kc( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \ - K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \ - K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, \ - K64, K65, K66, K67, K68, K70, K71, K72, K73, K74 \ -) LAYOUT_68_ansi( \ - KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, \ - KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, \ - KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, \ - KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, \ - KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, \ - KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, \ - KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \ - KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \ -) diff --git a/keyboards/40percentclub/mf68/readme.md b/keyboards/40percentclub/mf68/readme.md deleted file mode 100644 index 825c265f167..00000000000 --- a/keyboards/40percentclub/mf68/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# mf68 - -![mf68](https://3.bp.blogspot.com/-0YCA3Hx2Rq0/WD3U3GWhyvI/AAAAAAAB_Uo/RWTeyCPblGcxDrDwT9WL9ck2ZRuR26DgACLcB/s640/IMG_20161129_063741.jpg) -=== - -Magicforce 68 with [replacement PCB](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) designed by [di0ib](https://github.com/di0ib). - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) - -Keyboard Maintainer: QMK Community -Hardware Supported: Pro Micro -Hardware Availability: [PCB files](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68/pcb) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/mf68:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk deleted file mode 100644 index 27642d8604f..00000000000 --- a/keyboards/40percentclub/mf68/rules.mk +++ /dev/null @@ -1,79 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = 68_ansi diff --git a/keyboards/40percentclub/nano/config.h b/keyboards/40percentclub/nano/config.h deleted file mode 100644 index 5eb65c74ad8..00000000000 --- a/keyboards/40percentclub/nano/config.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x0007 -#define DEVICE_VER 0x0001 -#define MANUFACTURER di0ib -#define PRODUCT Nano -#define DESCRIPTION 8 key microswitch board - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -// #define MATRIX_ROW_PINS { D0, D5 } -// #define MATRIX_COL_PINS { F1, F0, B0 } -#define DIRECT_PINS { \ - { F4, F5, F6, F7 }, \ - { D1, D0, D4, C6 }, \ -} -#define UNUSED_PINS - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -//#define DIODE_DIRECTION CUSTOM_MATRIX - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 6 // Number of LEDs diff --git a/keyboards/40percentclub/nano/info.json b/keyboards/40percentclub/nano/info.json deleted file mode 100644 index b135a2d097e..00000000000 --- a/keyboards/40percentclub/nano/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Nano", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 2, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] - } - } -} diff --git a/keyboards/40percentclub/nano/keymaps/default/keymap.c b/keyboards/40percentclub/nano/keymaps/default/keymap.c deleted file mode 100644 index 9ce282a28a1..00000000000 --- a/keyboards/40percentclub/nano/keymaps/default/keymap.c +++ /dev/null @@ -1,18 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _MAIN 0 -#define _FN 1 - -#define KC_X0 LT(_FN, KC_ESC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_MAIN] = LAYOUT( - KC_VOLU, KC_MPLY, KC_MPRV, KC_PGUP, - KC_VOLD, KC_MUTE, KC_MNXT, KC_PGDN - ), - - [_FN] = LAYOUT( - KC_F, _______, RGB_HUI, _______, - RGB_TOG, RGB_MOD, RGB_HUD, _______ - ) -}; diff --git a/keyboards/40percentclub/nano/keymaps/default/rules.mk b/keyboards/40percentclub/nano/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/40percentclub/nano/keymaps/spooka/config.h b/keyboards/40percentclub/nano/keymaps/spooka/config.h deleted file mode 100644 index 05900a215b4..00000000000 --- a/keyboards/40percentclub/nano/keymaps/spooka/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2018 Danny Nguyen - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/40percentclub/nano/keymaps/spooka/keymap.c b/keyboards/40percentclub/nano/keymaps/spooka/keymap.c deleted file mode 100644 index 7908794fe01..00000000000 --- a/keyboards/40percentclub/nano/keymaps/spooka/keymap.c +++ /dev/null @@ -1,10 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _MAIN 0 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_MAIN] = LAYOUT( - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD - ) -}; diff --git a/keyboards/40percentclub/nano/keymaps/spooka/rules.mk b/keyboards/40percentclub/nano/keymaps/spooka/rules.mk deleted file mode 100644 index 8b137891791..00000000000 --- a/keyboards/40percentclub/nano/keymaps/spooka/rules.mk +++ /dev/null @@ -1 +0,0 @@ - diff --git a/keyboards/40percentclub/nano/nano.c b/keyboards/40percentclub/nano/nano.c deleted file mode 100644 index 63e23545e6c..00000000000 --- a/keyboards/40percentclub/nano/nano.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "nano.h" - -void matrix_init_kb(void) { - matrix_init_user(); -} diff --git a/keyboards/40percentclub/nano/nano.h b/keyboards/40percentclub/nano/nano.h deleted file mode 100644 index 881309738bd..00000000000 --- a/keyboards/40percentclub/nano/nano.h +++ /dev/null @@ -1,13 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_2x4( \ - k01, k02, k03, k04, \ - k05, k06, k07, k08 \ - ) { \ - { k01, k02, k03, k04 }, \ - { k05, k06, k07, k08 } \ -} - -#define LAYOUT LAYOUT_ortho_2x4 diff --git a/keyboards/40percentclub/nano/readme.md b/keyboards/40percentclub/nano/readme.md deleted file mode 100644 index 2677e5b7b74..00000000000 --- a/keyboards/40percentclub/nano/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# nano - -![nano](https://1.bp.blogspot.com/-goa_eXx1McA/WEhvoSdfDSI/AAAAAAAB_bM/XdstcXe_eKkQxuYcNI5cTySTVo3xZxaeQCEw/s640/IMG_20161207_101051.jpg) -=== - -A 2x4 mini switch pad built using 6mm x 6mm tactile switches and a Pro Micro. [More info here.](http://www.40percent.club/2016/12/nano-tmk.html) - -Keyboard Maintainer: QMK Community -Hardware Supported: Pro Micro ATmega32U4 -Hardware Availability: [PCB Files](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/nano/pcb) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/nano:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/nano/rules.mk b/keyboards/40percentclub/nano/rules.mk deleted file mode 100644 index e3c97e0d442..00000000000 --- a/keyboards/40percentclub/nano/rules.mk +++ /dev/null @@ -1,78 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h deleted file mode 100644 index da1bc91dd12..00000000000 --- a/keyboards/40percentclub/nein/config.h +++ /dev/null @@ -1,239 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x9999 -#define MANUFACTURER di0ib -#define PRODUCT The nein Keyboard -#define DESCRIPTION 9 key macropad - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { F4, F5, F6 }, \ - { F7, B1, B3 }, \ - { B2, B6, B5 } \ -} -#define UNUSED_PINS - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/40percentclub/nein/info.json b/keyboards/40percentclub/nein/info.json deleted file mode 100644 index aaadc718616..00000000000 --- a/keyboards/40percentclub/nein/info.json +++ /dev/null @@ -1,22 +0,0 @@ -{ - "keyboard_name": "nein", - "url": "", - "maintainer": "qmk", - "width": 3, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2} - ] - } - } -} diff --git a/keyboards/40percentclub/nein/keymaps/default/keymap.c b/keyboards/40percentclub/nein/keymaps/default/keymap.c deleted file mode 100644 index 674a8bb7fc4..00000000000 --- a/keyboards/40percentclub/nein/keymaps/default/keymap.c +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_3x3( - KC_MUTE, KC_HOME, KC_MPLY, \ - MO(1), KC_UP, KC_END, \ - KC_LEFT, KC_DOWN, KC_RGHT \ - ), - [1] = LAYOUT_ortho_3x3( - RESET, _______, KC_STOP, \ - _______, _______, RGB_MOD, \ - KC_MPRV, _______, KC_MNXT \ - ), -}; diff --git a/keyboards/40percentclub/nein/nein.c b/keyboards/40percentclub/nein/nein.c deleted file mode 100644 index 0b4d05d9412..00000000000 --- a/keyboards/40percentclub/nein/nein.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "nein.h" diff --git a/keyboards/40percentclub/nein/nein.h b/keyboards/40percentclub/nein/nein.h deleted file mode 100644 index fd0118f75b4..00000000000 --- a/keyboards/40percentclub/nein/nein.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_3x3( \ - k00, k01, k02, \ - k10, k11, k12, \ - k20, k21, k22 \ -) \ -{ \ - { k00, k01, k02 }, \ - { k10, k11, k12 }, \ - { k20, k21, k22 } \ -} diff --git a/keyboards/40percentclub/nein/readme.md b/keyboards/40percentclub/nein/readme.md deleted file mode 100644 index 49ce04f13bd..00000000000 --- a/keyboards/40percentclub/nein/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# nein - -![nein](https://2.bp.blogspot.com/-avYV4grcAPQ/XL9a67SxgKI/AAAAAAACVCE/GSGVYRThaEEDd14M3LG34gQTv5ZabRI0QCEwYBhgL/s640/a.jpg) -=== - -A 9 key macropad. - -Powered by a Pro Micro and can fit any of the various different sized variations of Pro Micro. - -Keyboard Maintainer: QMK Community -Hardware Supported: nein PCB -Hardware Availability: [nein project on 40% Keyboards](https://www.40percent.club/2019/04/nein.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/nein:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk deleted file mode 100644 index 1e3748287ce..00000000000 --- a/keyboards/40percentclub/nein/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h deleted file mode 100644 index ecaa68ada0b..00000000000 --- a/keyboards/40percentclub/nori/config.h +++ /dev/null @@ -1,216 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0A0C -#define DEVICE_VER 0x0444 -#define MANUFACTURER di0ib -#define PRODUCT The nori Keyboard -#define DESCRIPTION A modular compact keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D2, D1, D0 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D4, C6, D7, E6 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B5 -//#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -// enable RGB underglow -#define RGB_DI_PIN B4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/40percentclub/nori/info.json b/keyboards/40percentclub/nori/info.json deleted file mode 100644 index db0d6aaadb7..00000000000 --- a/keyboards/40percentclub/nori/info.json +++ /dev/null @@ -1,117 +0,0 @@ -{ - "keyboard_name": "nori", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [ - { "w": 1, "x": 0, "y": 0 }, - { "w": 1, "x": 1, "y": 0 }, - { "w": 1, "x": 2, "y": 0 }, - { "w": 1, "x": 3, "y": 0 }, - { "w": 1, "x": 0, "y": 1 }, - { "w": 1, "x": 1, "y": 1 }, - { "w": 1, "x": 2, "y": 1 }, - { "w": 1, "x": 3, "y": 1 }, - { "w": 1, "x": 0, "y": 2 }, - { "w": 1, "x": 1, "y": 2 }, - { "w": 1, "x": 2, "y": 2 }, - { "w": 1, "x": 3, "y": 2 }, - { "w": 1, "x": 0, "y": 3 }, - { "w": 1, "x": 1, "y": 3 }, - { "w": 1, "x": 2, "y": 3 }, - { "w": 1, "x": 3, "y": 3 } ] - }, - "LAYOUT_ortho_4x8": { - "key_count": 32, - "layout": [ - { "w": 1, "x": 0, "y": 0 }, - { "w": 1, "x": 1, "y": 0 }, - { "w": 1, "x": 2, "y": 0 }, - { "w": 1, "x": 3, "y": 0 }, - { "w": 1, "x": 4, "y": 0 }, - { "w": 1, "x": 5, "y": 0 }, - { "w": 1, "x": 6, "y": 0 }, - { "w": 1, "x": 7, "y": 0 }, - { "w": 1, "x": 0, "y": 1 }, - { "w": 1, "x": 1, "y": 1 }, - { "w": 1, "x": 2, "y": 1 }, - { "w": 1, "x": 3, "y": 1 }, - { "w": 1, "x": 4, "y": 1 }, - { "w": 1, "x": 5, "y": 1 }, - { "w": 1, "x": 6, "y": 1 }, - { "w": 1, "x": 7, "y": 1 }, - { "w": 1, "x": 0, "y": 2 }, - { "w": 1, "x": 1, "y": 2 }, - { "w": 1, "x": 2, "y": 2 }, - { "w": 1, "x": 3, "y": 2 }, - { "w": 1, "x": 4, "y": 2 }, - { "w": 1, "x": 5, "y": 2 }, - { "w": 1, "x": 6, "y": 2 }, - { "w": 1, "x": 7, "y": 2 }, - { "w": 1, "x": 0, "y": 3 }, - { "w": 1, "x": 1, "y": 3 }, - { "w": 1, "x": 2, "y": 3 }, - { "w": 1, "x": 3, "y": 3 }, - { "w": 1, "x": 4, "y": 3 }, - { "w": 1, "x": 5, "y": 3 }, - { "w": 1, "x": 6, "y": 3 }, - { "w": 1, "x": 7, "y": 3 } ] - }, - "LAYOUT_ortho_4x12": { - "key_count": 48, - "layout": [ - { "w": 1, "x": 0, "y": 0 }, - { "w": 1, "x": 1, "y": 0 }, - { "w": 1, "x": 2, "y": 0 }, - { "w": 1, "x": 3, "y": 0 }, - { "w": 1, "x": 4, "y": 0 }, - { "w": 1, "x": 5, "y": 0 }, - { "w": 1, "x": 6, "y": 0 }, - { "w": 1, "x": 7, "y": 0 }, - { "w": 1, "x": 8, "y": 0 }, - { "w": 1, "x": 9, "y": 0 }, - { "w": 1, "x": 10, "y": 0 }, - { "w": 1, "x": 11, "y": 0 }, - { "w": 1, "x": 0, "y": 1 }, - { "w": 1, "x": 1, "y": 1 }, - { "w": 1, "x": 2, "y": 1 }, - { "w": 1, "x": 3, "y": 1 }, - { "w": 1, "x": 4, "y": 1 }, - { "w": 1, "x": 5, "y": 1 }, - { "w": 1, "x": 6, "y": 1 }, - { "w": 1, "x": 7, "y": 1 }, - { "w": 1, "x": 8, "y": 1 }, - { "w": 1, "x": 9, "y": 1 }, - { "w": 1, "x": 10, "y": 1 }, - { "w": 1, "x": 11, "y": 1 }, - { "w": 1, "x": 0, "y": 2 }, - { "w": 1, "x": 1, "y": 2 }, - { "w": 1, "x": 2, "y": 2 }, - { "w": 1, "x": 3, "y": 2 }, - { "w": 1, "x": 4, "y": 2 }, - { "w": 1, "x": 5, "y": 2 }, - { "w": 1, "x": 6, "y": 2 }, - { "w": 1, "x": 7, "y": 2 }, - { "w": 1, "x": 8, "y": 2 }, - { "w": 1, "x": 9, "y": 2 }, - { "w": 1, "x": 10, "y": 2 }, - { "w": 1, "x": 11, "y": 2 }, - { "w": 1, "x": 0, "y": 3 }, - { "w": 1, "x": 1, "y": 3 }, - { "w": 1, "x": 2, "y": 3 }, - { "w": 1, "x": 3, "y": 3 }, - { "w": 1, "x": 4, "y": 3 }, - { "w": 1, "x": 5, "y": 3 }, - { "w": 1, "x": 6, "y": 3 }, - { "w": 1, "x": 7, "y": 3 }, - { "w": 1, "x": 8, "y": 3 }, - { "w": 1, "x": 9, "y": 3 }, - { "w": 1, "x": 10, "y": 3 }, - { "w": 1, "x": 11, "y": 3 } ] - } - } -} diff --git a/keyboards/40percentclub/nori/keymaps/default/config.h b/keyboards/40percentclub/nori/keymaps/default/config.h deleted file mode 100644 index 90831ff34e7..00000000000 --- a/keyboards/40percentclub/nori/keymaps/default/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here -#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } diff --git a/keyboards/40percentclub/nori/keymaps/default/keymap.c b/keyboards/40percentclub/nori/keymaps/default/keymap.c deleted file mode 100644 index 3c225a0d9c2..00000000000 --- a/keyboards/40percentclub/nori/keymaps/default/keymap.c +++ /dev/null @@ -1,159 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, -}; - -#define LOWER MO(_LOWER) -#define RAISE MO(_RAISE) -#define ADJUST MO(_ADJUST) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT_ortho_4x12( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT_ortho_4x12( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | ' | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT_ortho_4x12( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT_ortho_4x12( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT_ortho_4x12( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = LAYOUT_ortho_4x12( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) - - -}; - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - } - return true; -} diff --git a/keyboards/40percentclub/nori/keymaps/default/readme.md b/keyboards/40percentclub/nori/keymaps/default/readme.md deleted file mode 100644 index 4a55a35e4be..00000000000 --- a/keyboards/40percentclub/nori/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap diff --git a/keyboards/40percentclub/nori/keymaps/macro/config.h b/keyboards/40percentclub/nori/keymaps/macro/config.h deleted file mode 100644 index 03f34d3f517..00000000000 --- a/keyboards/40percentclub/nori/keymaps/macro/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here -#undef RGBLED_NUM -#define RGBLED_NUM 4 diff --git a/keyboards/40percentclub/nori/keymaps/macro/keymap.c b/keyboards/40percentclub/nori/keymaps/macro/keymap.c deleted file mode 100644 index 14dc0b678c9..00000000000 --- a/keyboards/40percentclub/nori/keymaps/macro/keymap.c +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_4x4( /* Base */ - KC_INT1, KC_INT2, KC_INT3, KC_INT5, \ - KC_F13, KC_F14, KC_F15, KC_F16, \ - KC_F17, KC_F18, KC_F19, KC_F20, \ - KC_F21, KC_F22, KC_F23, KC_F24 \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/40percentclub/nori/keymaps/macro/readme.md b/keyboards/40percentclub/nori/keymaps/macro/readme.md deleted file mode 100644 index de2324248ac..00000000000 --- a/keyboards/40percentclub/nori/keymaps/macro/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default single board macro keymap for nori diff --git a/keyboards/40percentclub/nori/nori.c b/keyboards/40percentclub/nori/nori.c deleted file mode 100644 index 9d27df7a5c9..00000000000 --- a/keyboards/40percentclub/nori/nori.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "nori.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/nori/nori.h b/keyboards/40percentclub/nori/nori.h deleted file mode 100644 index 802f0bfce6d..00000000000 --- a/keyboards/40percentclub/nori/nori.h +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) \ -{ \ - { K00, K01, K02, K03, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - { K10, K11, K12, K13, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - { K20, K21, K22, K23, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - { K30, K31, K32, K33, ___, ___, ___, ___, ___, ___, ___, ___ } \ -} -#define LAYOUT_ortho_4x8( \ - K00, K01, K02, K03, K04, K05, K06, K07, \ - K10, K11, K12, K13, K14, K15, K16, K17, \ - K20, K21, K22, K23, K24, K25, K26, K27, \ - K30, K31, K32, K33, K34, K35, K36, K37\ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, ___, ___, ___, ___ }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, ___, ___, ___, ___ }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, ___, ___, ___, ___ }, \ - { K30, K31, K32, K33, K34, K35, K35, K37, ___, ___, ___, ___ } \ -} -#define LAYOUT_ortho_4x12( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b } \ -} - -#define LAYOUT_kc_ortho_4x12( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b \ -) \ -{ \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b } \ -} diff --git a/keyboards/40percentclub/nori/readme.md b/keyboards/40percentclub/nori/readme.md deleted file mode 100644 index 3dd8afff48b..00000000000 --- a/keyboards/40percentclub/nori/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# nori - -![nori](https://2.bp.blogspot.com/-UBFz3c1-8hM/W48N0ynt6TI/AAAAAAACSQg/MHLY-DchBBMiiHUeIPVt_4T6x-ntmdjgwCEwYBhgL/s640/a.jpg) -=== - -A 4x12 matrix using 3 modular 4x4 matrix boards and powered by a Pro Micro. - -this one is using a Pro Micro. The Pro Micro has less data pins available so only 3 boards can be connected instead of 4. There are 2 pins left over, I used one (B5) for a backlight circuit like on a Gherkin. The other data pin (B4) is left for possible use with a WS2812B strip. - -Keyboard Maintainer: QMK Community -Hardware Supported: nori PCB -Hardware Availability: [nori project on 40% Keyboards](https://www.40percent.club/2018/10/nori.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/nori:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk deleted file mode 100644 index f52135379af..00000000000 --- a/keyboards/40percentclub/nori/rules.mk +++ /dev/null @@ -1,82 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 diff --git a/keyboards/40percentclub/readme.md b/keyboards/40percentclub/readme.md deleted file mode 100644 index a8dd0e84f5f..00000000000 --- a/keyboards/40percentclub/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# 40% Keyboards - -Website: [40percent.club](http://www.40percent.club/) -The original TMK firmware: [repo](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/) diff --git a/keyboards/40percentclub/tomato/config.h b/keyboards/40percentclub/tomato/config.h deleted file mode 100644 index e131ce5c203..00000000000 --- a/keyboards/40percentclub/tomato/config.h +++ /dev/null @@ -1,40 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 40 Percent Club -#define PRODUCT Tomato -#define DESCRIPTION A 30 key ortholinear keyboard with RGB backlighting - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* eliminate lag on space cadet mods */ -#define PERMISSIVE_HOLD - -/* setup lighting */ -#define RGB_DI_PIN B5 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 30 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/40percentclub/tomato/info.json b/keyboards/40percentclub/tomato/info.json deleted file mode 100644 index f01f5e7e0b7..00000000000 --- a/keyboards/40percentclub/tomato/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Tomato", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 10, - "height": 3, - "layouts": { - "LAYOUT_ortho_3x10": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}] - } - } -} diff --git a/keyboards/40percentclub/tomato/keymaps/default/keymap.c b/keyboards/40percentclub/tomato/keymaps/default/keymap.c deleted file mode 100644 index 01a868d7e30..00000000000 --- a/keyboards/40percentclub/tomato/keymaps/default/keymap.c +++ /dev/null @@ -1,143 +0,0 @@ -#include QMK_KEYBOARD_H - -#define SPC_F1 LT(1,KC_SPC) -#define BS_F2 LT(2,KC_BSPC) -#define C_F3 LT(3,KC_C) -#define V_F4 LT(4,KC_V) -#define B_F5 LT(5,KC_B) -#define Z_CTL MT(MOD_LCTL, KC_Z) -#define X_ALT MT(MOD_LALT, KC_X) -#define N_ALT MT(MOD_RALT, KC_N) -#define M_CTL MT(MOD_RCTL, KC_M) -#define ENT_SFT MT(MOD_RSFT, KC_ENT) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Level 0: Default Layer - * ,-------------------------------------------------------------------------------. - * | Q | W | E | R | T | Y | U | I | O | P | - * |-------------------------------------------------------------------------------| - * | A | S | D | F | G | H | J | K | L | ESC | - * |-------------------------------------------------------------------------------| - * | Z | X | C | V | BSPC | SPC | B | N | M | ENT | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P - , KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC - , Z_CTL, X_ALT, C_F3, V_F4, BS_F2, SPC_F1, B_F5, N_ALT, M_CTL, ENT_SFT - ), - /* Level 1: Numbers Layer - * ,-------------------------------------------------------------------------------. - * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - * |-------------------------------------------------------------------------------| - * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | - * |-------------------------------------------------------------------------------| - * | | | | | DEL | | | | | | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 - , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 - , _______,_______,_______,_______,KC_DEL, _______,_______,_______,_______,_______ - ), - /* Level 2: Symbols Layer - * ,-------------------------------------------------------------------------------. - * | ! | @ | # | $ | % | ^ | & | * | ( | ) | - * |-------------------------------------------------------------------------------| - * | F11 | F12 | | | | | | | | ` | - * |-------------------------------------------------------------------------------| - * | | | | | | | | | | | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN - , KC_F11, KC_F12,_______,_______,_______,_______,_______,_______,_______,KC_GRAVE - , _______,_______,_______,_______,_______,_______,_______,_______,_______,_______ - ), - /* Level 3: RGB Layer - * ,-------------------------------------------------------------------------------. - * | | | | | | - | = | [ | ] | \ | - * |-------------------------------------------------------------------------------| - * | Tab | | | | | , | . | / | ; | ' | - * |-------------------------------------------------------------------------------| - * | | | | | | | Left | Down | Up | Right | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( _______,_______,_______,_______,_______,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS - , KC_TAB, _______,_______,_______,_______,KC_COMM,KC_DOT, KC_SLSH,KC_SCLN,KC_QUOT - , _______,_______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP, KC_RGHT - ), - /* Level 4: RGB Layer - * ,-------------------------------------------------------------------------------. - * | | | | | | _ | + | { | } | | | - * |-------------------------------------------------------------------------------| - * | Tab | | | | | < | > | ? | : | " | - * |-------------------------------------------------------------------------------| - * | | | | | | | Home | PgDn | PgUp | End | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( _______,_______,_______,_______,_______,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE - , KC_TAB, _______,_______,_______,_______,KC_LT, KC_GT, KC_QUES,KC_COLN,KC_DQUO - , _______,_______,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END - ), - /* Level 5: RGB Layer - * ,-------------------------------------------------------------------------------. - * | Calc | Web | Mail |Explore| | | | | | | - * |-------------------------------------------------------------------------------| - * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD|xxxxxxx|xxxxxxx|RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD| - * |-------------------------------------------------------------------------------| - * | | | | | Flash | | | | | | - * '-------------------------------------------------------------------------------' - */ - LAYOUT_ortho_3x10 - ( KC_CALC,KC_WSCH,KC_MAIL,KC_MYCM,_______,_______,_______,_______,_______,_______ - , RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,XXXXXXX,XXXXXXX,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD - , _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______ - ), -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/40percentclub/tomato/readme.md b/keyboards/40percentclub/tomato/readme.md deleted file mode 100644 index f93105ffdda..00000000000 --- a/keyboards/40percentclub/tomato/readme.md +++ /dev/null @@ -1,22 +0,0 @@ -# Tomato - -![Tomato](https://2.bp.blogspot.com/-k6lyvfZz2WA/WXYyr508D7I/AAAAAAACB8A/UCNP2WCfvWAT8UWsCDICMRXwip5tAZsOwCLcBGAs/s640/a.JPG) -=== - -A 30 key keyboard with programmable rgb backlighting. - -* [The fluff](http://www.40percent.club/2017/07/tomato-in-gherkin.html) -* [The meat](https://github.com/di0ib/Misc/tree/master/tomato) - -Keyboard Maintainer: QMK Community -Hardware Supported: Tomato PCB -Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2017/07/tomato-in-gherkin.html) - -Make example for this keyboard (after setting up your build environment): - - make 40percentclub/tomato:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -First pass at adding support for the tomato keyboard. Completely -untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/tomato/rules.mk b/keyboards/40percentclub/tomato/rules.mk deleted file mode 100644 index 844ff998277..00000000000 --- a/keyboards/40percentclub/tomato/rules.mk +++ /dev/null @@ -1,74 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes - -LAYOUTS = ortho_3x10 diff --git a/keyboards/40percentclub/tomato/tomato.c b/keyboards/40percentclub/tomato/tomato.c deleted file mode 100644 index dbf8bfe12b6..00000000000 --- a/keyboards/40percentclub/tomato/tomato.c +++ /dev/null @@ -1 +0,0 @@ -#include "tomato.h" diff --git a/keyboards/40percentclub/tomato/tomato.h b/keyboards/40percentclub/tomato/tomato.h deleted file mode 100644 index 70bffee302a..00000000000 --- a/keyboards/40percentclub/tomato/tomato.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_3x10( \ - K00, K01, K02, K03, K04, K05, K10, K11, K12, K13 , \ - K14, K15, K20, K21, K22, K23, K24, K25, K30, K31 , \ - K32, K33, K34, K35, K40, K41, K42, K43, K44, K45 \ -) { \ - { K00, K01, K02, K03, K04, K05 }, \ - { K10, K11, K12, K13, K14, K15 }, \ - { K20, K21, K22, K23, K24, K25 }, \ - { K30, K31, K32, K33, K34, K35 }, \ - { K40, K41, K42, K43, K44, K45 } \ -} diff --git a/keyboards/40percentclub/ut47/LED_controls.ino b/keyboards/40percentclub/ut47/LED_controls.ino deleted file mode 100644 index dd50300eb7e..00000000000 --- a/keyboards/40percentclub/ut47/LED_controls.ino +++ /dev/null @@ -1,420 +0,0 @@ -#include -#include - -int iByte; -byte col = 0; -byte leds[12][4]; -byte pass = 1; -int fadecount = 1; -const int fadelimit = 3000; -const int fadelimitshort = 1000; -byte mode = 4; -byte brightness = 2; -boolean changemode = 0; -int rain = 0; -const int rainlimit = 5000; -const int rainfade = 5000; -byte rx = 0; -byte ry = 0; - -// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1) -int pins[17] = { - -1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21 -}; - -// col[xx] of leds = pin yy on led matrix -int cols[12] = { - pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16] -}; - -// row[xx] of leds = pin yy on led matrix -int rows[4] = { - pins[1], pins[2], pins[3], pins[4] -}; - - -#define DELAY 0 -extern byte leds[12][4]; - -void setup() { - Serial1.begin(9600); - setupLeds(); - for (int s = 0; s < 5; s++) { - for ( int r = 1; r < 9; r++) { - delayMicroseconds(65000); - delayMicroseconds(65000); - for (int j = 0; j < 4; j++) { - for (int i = 0; i < 12; i++) { - leds[i][j] = 1; - for (int p = 0; p < 25; p++) { - } - leds[i][j] = r; - } - } - } - for ( int r = 9; r > 0; r--) { - delayMicroseconds(65000); - delayMicroseconds(65000); - delayMicroseconds(65000); - for (int j = 0; j < 4; j++) { - for (int i = 0; i < 12; i++) { - leds[i][j] = 1; - for (int p = 0; p < 25; p++) { - } - leds[i][j] = r; - } - } - } - } -} - -void loop() { - - switch (mode) { - case 0: - //Blacklight - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - leds[i][j] = brightness; - } - } - checkserial(); - break; - case 1: - //Breathing - for ( int r = 1; r < 9; r++) { - checkserial(); - if (changemode == 0) { - delayMicroseconds(65000); - delayMicroseconds(65000); - delayMicroseconds(65000); - for (int j = 0; j < 4; j++) { - for (int i = 0; i < 12; i++) { - leds[i][j] = 1; - for (int p = 0; p < 25; p++) { - } - leds[i][j] = r; - } - } - } - else { - break; - } - } - for ( int r = 9; r > 0; r--) { - checkserial(); - if (changemode == 0) { - delayMicroseconds(65000); - delayMicroseconds(65000); - delayMicroseconds(65000); - delayMicroseconds(65000); - for (int j = 0; j < 4; j++) { - for (int i = 0; i < 12; i++) { - leds[i][j] = 1; - for (int p = 0; p < 25; p++) { - } - leds[i][j] = r; - } - } - } - else { - break; - } - } - for ( int r = 1; r < 30; r++) { - checkserial(); - if (changemode == 0) { - delayMicroseconds(65000); - delayMicroseconds(65000); - } - else { - break; - } - } - break; - case 2: - //Random - leds[random(12)][random(4)] = random(8); - delayMicroseconds(10000); - checkserial(); - break; - case 3: - //Rain - rain++; - if (rain > rainlimit) { - rain = 0; - rx = random(12); - ry = random(4); - if (leds[rx][ry] == 0) { - leds[rx][ry] = 18; - } - } - fadecount++; - if (fadecount > rainfade) { - fadecount = 1; - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - if (leds[i][j] > 0) { - leds[i][j] = leds[i][j] - 1; - } - } - } - } - checkserial(); - break; - case 4: - //Reactive - fadecount++; - if (fadecount > fadelimit) { - fadecount = 1; - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - if (leds[i][j] > 0) { - leds[i][j] = leds[i][j] - 1; - } - } - } - } - checkserial(); - break; - case 5: - //Reactive Target - fadecount++; - if (fadecount > fadelimitshort) { - fadecount = 1; - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - if (leds[i][j] > 0) { - leds[i][j] = leds[i][j] - 1; - } - } - } - } - checkserial(); - break; - default: - mode = 0; - break; - } - changemode = 0; -} - -void checkserial() { - if (Serial1.available() > 0) { - iByte = Serial1.read(); - if (iByte == 100) { - brightness++; - if (brightness > 9) { - brightness = 1; - } - } - if (iByte == 101) { - mode++; - } - if (iByte < 100) { - if (mode == 4) { - byte row = iByte / 16; - byte col = iByte % 16; - leds[col][row] = 18; - } - if (mode == 5) { - byte row = iByte / 16; - byte col = iByte % 16; - for (byte i = 0; i < 12; i++) { - leds[i][row] = 18; - } - for (byte p = 0; p < 4; p++) { - leds[col][p] = 18; - } - } - } - } -} - -void setupLeds() { - // sets the pins as output - FastGPIO::Pin<2>::setOutputLow(); - FastGPIO::Pin<3>::setOutputLow(); - FastGPIO::Pin<4>::setOutputLow(); - FastGPIO::Pin<5>::setOutputLow(); - FastGPIO::Pin<6>::setOutputLow(); - FastGPIO::Pin<7>::setOutputLow(); - FastGPIO::Pin<8>::setOutputLow(); - FastGPIO::Pin<9>::setOutputLow(); - FastGPIO::Pin<10>::setOutputLow(); - FastGPIO::Pin<16>::setOutputLow(); - FastGPIO::Pin<14>::setOutputLow(); - FastGPIO::Pin<15>::setOutputLow(); - FastGPIO::Pin<18>::setOutputLow(); - FastGPIO::Pin<19>::setOutputLow(); - FastGPIO::Pin<20>::setOutputLow(); - FastGPIO::Pin<21>::setOutputLow(); - - // set up Cols - FastGPIO::Pin<6>::setOutputValueLow(); - FastGPIO::Pin<7>::setOutputValueLow(); - FastGPIO::Pin<8>::setOutputValueLow(); - FastGPIO::Pin<9>::setOutputValueLow(); - FastGPIO::Pin<10>::setOutputValueLow(); - FastGPIO::Pin<16>::setOutputValueLow(); - FastGPIO::Pin<14>::setOutputValueLow(); - FastGPIO::Pin<15>::setOutputValueLow(); - FastGPIO::Pin<18>::setOutputValueLow(); - FastGPIO::Pin<19>::setOutputValueLow(); - FastGPIO::Pin<20>::setOutputValueLow(); - FastGPIO::Pin<21>::setOutputValueLow(); - - // set up Rows - FastGPIO::Pin<2>::setOutputValueLow(); - FastGPIO::Pin<3>::setOutputValueLow(); - FastGPIO::Pin<4>::setOutputValueLow(); - FastGPIO::Pin<5>::setOutputValueLow(); - - clearLeds(); - Timer1.initialize(25); - Timer1.attachInterrupt(display); - -} - -void clearLeds() { - // Clear display array - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - leds[i][j] = 0; - } - } -} - -void onLeds() { - // Clear display array - for (int i = 0; i < 12; i++) { - for (int j = 0; j < 4; j++) { - leds[i][j] = 7; - } - } -} - -// Interrupt routine -void display() { - - switch (col) { // Turn whole previous column off - case 0: - FastGPIO::Pin<6>::setOutputValueLow(); - break; - case 1: - FastGPIO::Pin<7>::setOutputValueLow(); - break; - case 2: - FastGPIO::Pin<8>::setOutputValueLow(); - break; - case 3: - FastGPIO::Pin<9>::setOutputValueLow(); - break; - case 4: - FastGPIO::Pin<10>::setOutputValueLow(); - break; - case 5: - FastGPIO::Pin<16>::setOutputValueLow(); - break; - case 6: - FastGPIO::Pin<14>::setOutputValueLow(); - break; - case 7: - FastGPIO::Pin<15>::setOutputValueLow(); - break; - case 8: - FastGPIO::Pin<18>::setOutputValueLow(); - break; - case 9: - FastGPIO::Pin<19>::setOutputValueLow(); - break; - case 10: - FastGPIO::Pin<20>::setOutputValueLow(); - break; - case 11: - FastGPIO::Pin<21>::setOutputValueLow(); - break; - } - - col++; - if (col == 12) { - col = 0; - pass++; - if (pass > 8) { - pass = 1; - } - } - for (int row = 0; row < 4; row++) { - if (leds[col][row] > pass) { - switch (row) { // Turn on this led - case 0: - FastGPIO::Pin<2>::setOutputValueLow(); - break; - case 1: - FastGPIO::Pin<3>::setOutputValueLow(); - break; - case 2: - FastGPIO::Pin<4>::setOutputValueLow(); - break; - case 3: - FastGPIO::Pin<5>::setOutputValueLow(); - break; - } - } - else { - switch (row) { // Turn off this led - case 0: - FastGPIO::Pin<2>::setOutputValueHigh(); - break; - case 1: - FastGPIO::Pin<3>::setOutputValueHigh(); - break; - case 2: - FastGPIO::Pin<4>::setOutputValueHigh(); - break; - case 3: - FastGPIO::Pin<5>::setOutputValueHigh(); - break; - } - } - } - switch (col) { // Turn column on - case 0: - FastGPIO::Pin<6>::setOutputValueHigh(); - break; - case 1: - FastGPIO::Pin<7>::setOutputValueHigh(); - break; - case 2: - FastGPIO::Pin<8>::setOutputValueHigh(); - break; - case 3: - FastGPIO::Pin<9>::setOutputValueHigh(); - break; - case 4: - FastGPIO::Pin<10>::setOutputValueHigh(); - break; - case 5: - FastGPIO::Pin<16>::setOutputValueHigh(); - break; - case 6: - FastGPIO::Pin<14>::setOutputValueHigh(); - break; - case 7: - FastGPIO::Pin<15>::setOutputValueHigh(); - break; - case 8: - FastGPIO::Pin<18>::setOutputValueHigh(); - break; - case 9: - FastGPIO::Pin<19>::setOutputValueHigh(); - break; - case 10: - FastGPIO::Pin<20>::setOutputValueHigh(); - break; - case 11: - FastGPIO::Pin<21>::setOutputValueHigh(); - break; - } - -} diff --git a/keyboards/40percentclub/ut47/config.h b/keyboards/40percentclub/ut47/config.h deleted file mode 100644 index 25ef4271fb8..00000000000 --- a/keyboards/40percentclub/ut47/config.h +++ /dev/null @@ -1,79 +0,0 @@ -/* -Copyright 2018 Carlos Filoteo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 40percent.club -#define PRODUCT ut47 -#define DESCRIPTION An awesome 40% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -#define MATRIX_ROW_PINS { D1, D0, D4, C6 } -#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Enable GNAP matrix serial output */ -#define GNAP_ENABLE - -/* USART configuration */ -#ifdef __AVR_ATmega32U4__ -# define SERIAL_UART_BAUD 9600 -# define SERIAL_UART_DATA UDR1 -# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -# define SERIAL_UART_RXD_VECT USART1_RX_vect -# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -# define SERIAL_UART_INIT() do { \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX */ \ - UCSR1B = _BV(TXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ - sei(); \ - } while(0) -# else -# error "USART configuration is needed." -#endif diff --git a/keyboards/40percentclub/ut47/info.json b/keyboards/40percentclub/ut47/info.json deleted file mode 100644 index 59bffe99a37..00000000000 --- a/keyboards/40percentclub/ut47/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "UT47", - "url": "", - "maintainer": "qmk", - "width": 12.5, - "height": 4, - "layouts": { - "LAYOUT": { - "key_count": 47, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Backspace", "x":11, "y":0, "w":1.5}, {"label":"LT(3) / Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.25}, {"label":"Shift", "x":0, "y":2, "w":1.5}, {"label":"Z", "x":1.5, "y":2}, {"label":"X", "x":2.5, "y":2}, {"label":"C", "x":3.5, "y":2}, {"label":"V", "x":4.5, "y":2}, {"label":"B", "x":5.5, "y":2}, {"label":"N", "x":6.5, "y":2}, {"label":"M", "x":7.5, "y":2}, {"label":"<", "x":8.5, "y":2}, {"label":">", "x":9.5, "y":2}, {"label":"?", "x":10.5, "y":2}, {"label":"Shift / Enter", "x":11.5, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Alt", "x":1, "y":3}, {"label":"GUI", "x":2, "y":3}, {"label":"Menu", "x":3, "y":3}, {"label":"MO(2)", "x":4, "y":3, "w":1.25}, {"x":5.25, "y":3, "w":2}, {"label":"MO(1)", "x":7.25, "y":3, "w":1.25}, {"label":"\u2190", "x":8.5, "y":3}, {"label":"\u2193", "x":9.5, "y":3}, {"label":"\u2191", "x":10.5, "y":3}, {"label":"\u2192", "x":11.5, "y":3}] - } - } -} diff --git a/keyboards/40percentclub/ut47/keymaps/default/config.h b/keyboards/40percentclub/ut47/keymaps/default/config.h deleted file mode 100644 index 023c753c27a..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c deleted file mode 100644 index 0fa7838dfd7..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/default/keymap.c +++ /dev/null @@ -1,135 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - -#define LT3_TAB LT(3, KC_TAB) -#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) - -enum custom_keycodes { - LED_TOG = SAFE_RANGE, - LED_CHG -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Base Layer - * ,-------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace | - * |-------------------------------------------------------------------------+ - * |Tab/L3| A | S | D | F | G | H | J | K | L | ; | ' | - * |-------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / |Sh/En| - * |-------------------------------------------------------------------------+ - * | Ctrl| Alt | Gui | App | L2 | Space | L1 | Left| Down| Up |Right| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT, - KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), - - /* FN Layer 1 - * ,-------------------------------------------------------------------------. - * | ` ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete| - * |-------------------------------------------------------------------------+ - * | | | | | | | | - | = | [ | ] | \ | - * |-------------------------------------------------------------------------+ - * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | Home| PgDn| PgUp| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Right */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - - /* FN Layer 2 - * ,-------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) |Delete| - * |-------------------------------------------------------------------------+ - * | | | | | | | | _ | + | { | } | | | - * |-------------------------------------------------------------------------+ - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | Home| PgDn| PgUp| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Left */ - KC_TILDE, KC_EXCLAIM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - - /* FN Layer 2 - * ,-------------------------------------------------------------------------. - * | Esc | Calc|Webhm| Mail| Comp| | | | | |PrtSc| | - * |-------------------------------------------------------------------------+ - * | | | | | | | | | | | | | - * |-------------------------------------------------------------------------+ - * | |LEDtg|LEDch| | | | | | | | | | - * |-------------------------------------------------------------------------+ - * | | | | | | | |MousL|MousD|MousU|MousR| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Tab */ - KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R -), -}; - -//LED keymap functions - #ifdef LED_ENABLE -void led_chmode(void) { - serial_send(101); -} - -void led_toggle(void) { - serial_send(100); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case LED_TOG: - #ifdef LED_ENABLE - led_toggle(); - #endif - return false; - case LED_CHG: - #ifdef LED_ENABLE - led_chmode(); - #endif - return false; - } - } - return true; -}; -#endif diff --git a/keyboards/40percentclub/ut47/keymaps/default/readme.md b/keyboards/40percentclub/ut47/keymaps/default/readme.md deleted file mode 100644 index e09dc73fab8..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/default/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# UT47 default keymap - -![UT47 layout image](https://i.imgur.com/Tsz5qsF.png) - -[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined) - -### LED Controls - -Use TAB+Z to cycle through brightness (8 steps) - -Use TAB+X to cycle through the following LED modes: - -- solid -- breathing -- random -- rain -- reactive -- poptang -- off diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/config.h b/keyboards/40percentclub/ut47/keymaps/non-us/config.h deleted file mode 100644 index f88ebf7e803..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/non-us/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c deleted file mode 100644 index 0c1c2e75999..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c +++ /dev/null @@ -1,135 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - -#define LT3_TAB LT(3, KC_TAB) -#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) - -enum custom_keycodes { - LED_TOG = SAFE_RANGE, - LED_CHG -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Base Layer - * ,-------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace | - * |-------------------------------------------------------------------------+ - * |Tab/L3| A | S | D | F | G | H | J | K | L | ; | ' | - * |-------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / |Sh/En| - * |-------------------------------------------------------------------------+ - * | Ctrl| Alt | Gui | App | L2 | Space | L1 | Left| Down| Up |Right| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT, - KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), - - /* FN Layer 1 - * ,-------------------------------------------------------------------------. - * | ` ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete| - * |-------------------------------------------------------------------------+ - * | | | | | | | # | - | = | [ | ] | \ | - * |-------------------------------------------------------------------------+ - * | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | Home| PgDn| PgUp| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Right */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, - _______, _______, _______, _______, _______, _______, KC_NUHS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NUBS, - _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - - /* FN Layer 2 - * ,-------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) |Delete| - * |-------------------------------------------------------------------------+ - * | | | | | | | | _ | + | { | } | | | - * |-------------------------------------------------------------------------+ - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | Home| PgDn| PgUp| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Left */ - KC_TILDE, KC_EXCLAIM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - - /* FN Layer 2 - * ,-------------------------------------------------------------------------. - * | Esc | Calc|Webhm| Mail| Comp| | | | | |PrtSc| | - * |-------------------------------------------------------------------------+ - * | | | | | | | | | | | | | - * |-------------------------------------------------------------------------+ - * | |LEDtg|LEDch| | | | | | | | | | - * |-------------------------------------------------------------------------+ - * | | | | | | | |MousL|MousD|MousU|MousR| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Tab */ - KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R -), -}; - -//LED keymap functions - #ifdef LED_ENABLE -void led_chmode(void) { - serial_send(101); -} - -void led_toggle(void) { - serial_send(100); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case LED_TOG: - #ifdef LED_ENABLE - led_toggle(); - #endif - return false; - case LED_CHG: - #ifdef LED_ENABLE - led_chmode(); - #endif - return false; - } - } - return true; -}; -#endif diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/readme.md b/keyboards/40percentclub/ut47/keymaps/non-us/readme.md deleted file mode 100644 index e09dc73fab8..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/non-us/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# UT47 default keymap - -![UT47 layout image](https://i.imgur.com/Tsz5qsF.png) - -[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined) - -### LED Controls - -Use TAB+Z to cycle through brightness (8 steps) - -Use TAB+X to cycle through the following LED modes: - -- solid -- breathing -- random -- rain -- reactive -- poptang -- off diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/config.h b/keyboards/40percentclub/ut47/keymaps/nordic/config.h deleted file mode 100644 index fcdd2c2322b..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/nordic/config.h +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c deleted file mode 100644 index f3e297ec03d..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c +++ /dev/null @@ -1,178 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#ifdef LED_ENABLE - #include "protocol/serial.h" - -#endif - -#include "keymap_norwegian.h" - -#define LT3_TAB LT(3, KC_TAB) -#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) -#define CTRADEL LALT(LCTL(KC_DEL)) -#define ALTTAB LALT(KC_TAB) - -enum custom_keycodes { - LED_TOG = SAFE_RANGE, - LED_CHG -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Base Layer - L0 - * ,-------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace | - * |-------------------------------------------------------------------------+ - * |Tab/L3| A | S | D | F | G | H | J | K | L | ' |Ent/RS| - * |-------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | Up | L4 | - * |-------------------------------------------------------------------------+ - * | Ctrl| Gui | L4 | Alt | L2 | Space | L1 | Ctrl| Left| Down|Right| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Base - L0 */ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_APOS, MT_RSFT_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(4), - KC_LCTL, KC_LGUI, MO(4), KC_LALT, MO(2), KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT -), - - /* FN Layer 1 - * ,-------------------------------------------------------------------------. - * | | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete| - * |-------------------------------------------------------------------------+ - * | | | | | | | | | + | = | * | / | - * |-------------------------------------------------------------------------+ - * | | | | | | | | | - | _ | PgUp| | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | | Home| PgDn| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Right modifier - L1 */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, _______, NO_PLUS, NO_EQL, NO_ASTR, NO_SLSH, - _______, _______, _______, _______, _______, _______, _______, _______, NO_MINS, NO_UNDS, KC_PGUP, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END -), - - /* FN Layer 2 - * ,-------------------------------------------------------------------------. - * | § | ! | " | # | ¤ | % | & | / | = | + | \ | Delete| - * |-------------------------------------------------------------------------+ - * | | | ? | { | [ | ( | ) | ] | } | F10 | F11 | F12 | - * |-------------------------------------------------------------------------+ - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | PgUp| | - * |-------------------------------------------------------------------------+ - * | | | |Capsl| | | | | Home| PgDn| End | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Left modifier - L2 */ - NO_SECT, KC_EXCLAIM, NO_QUO2, KC_HASH, NO_BULT, KC_PERCENT, NO_AMPR, NO_SLSH, NO_EQL, NO_PLUS, NO_BSLS, KC_DELETE, - _______, _______, NO_QUES, NO_LCBR, NO_LBRC, NO_LPRN, NO_RPRN, NO_RBRC, NO_RCBR, KC_F10, KC_F11, KC_F12, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_PGUP, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END -), - - /* FN Layer 3 - * ,-------------------------------------------------------------------------. - * | Esc | Calc|Webhm| Comp|Webrf| | | | | |PrtSc|CtrAlDl| - * |-------------------------------------------------------------------------+ - * | | | | | | | |VolDn|VolUp| | | | - * |-------------------------------------------------------------------------+ - * | |LEDtg|LEDch| | |RESET| | Mute| |MouB1|MousU|MouB2| - * |-------------------------------------------------------------------------+ - * | | | | | | | | |MousL|MousD|MousR| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Hold Tab down - L3 */ - KC_ESC, KC_CALC, KC_WHOM, KC_MYCM, KC_WREF, _______, _______, _______, _______, _______, KC_PSCR, CTRADEL, - _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______, _______, _______, - _______, LED_TOG, LED_CHG, _______, _______, RESET, _______, KC_MUTE, _______, KC_MS_BTN1, KC_MS_U, KC_MS_BTN2, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R -), - - /* FN Layer 4 - * ,-------------------------------------------------------------------------. - * | | | @ | £ | $ | ~ | | ¨ | ´ | ` | Å | | - * |-------------------------------------------------------------------------+ - * | | | | € | | | | | ^ | Ø | Æ | | - * |-------------------------------------------------------------------------+ - * | | < | | | | | | µ | | | | | - * |-------------------------------------------------------------------------+ - * | | | | | | | | L5 | | | | - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* Norsk - L4 */ - _______, _______, NO_AT, NO_PND, NO_DLR, NO_TILD, _______, NO_QUOT, NO_ACUT, NO_GRV, NO_AA, _______, - _______, _______, _______, NO_EURO, _______, _______, _______, _______, NO_CIRC, NO_OSLH, NO_AE, _______, - _______, NO_LESS, _______, _______, _______, _______, _______, NO_MU, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, TO(5), _______, _______, _______ -), - - /* GAMING Layer (toggle on and off) - * ,-------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | F1 | F2 | F3 | F4 |Alt+Tab| - * |-------------------------------------------------------------------------+ - * | Tab | A | S | D | F | G | H | F5 | F6 | F7 | F8 | Enter| - * |-------------------------------------------------------------------------+ - * | Shift | 1 | 2 | 3 | 4 | 5 | 6 | F9 | F10 | F11 | Up |TOGGL| - * |-------------------------------------------------------------------------+ - * | Ctrl| Z | X | C | B | Space | M | V |Left |Down |Right| - * `-------------------------------------------------------------------------' - */ - -LAYOUT( /* GAMING, toggled on and off - L5 */ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_F1, KC_F2, KC_F3, KC_F4, ALTTAB, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_F5, KC_F6, KC_F7, KC_F8, KC_ENT, - KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_UP, TO(0), - KC_LCTL, KC_Z, KC_X, KC_C, KC_B, KC_SPC, KC_M, KC_V, KC_LEFT, KC_DOWN, KC_RGHT -), -}; - -//LED keymap functions - #ifdef LED_ENABLE -void led_chmode(void) { - serial_send(101); -} - -void led_toggle(void) { - serial_send(100); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case LED_TOG: - #ifdef LED_ENABLE - led_toggle(); - #endif - return false; - case LED_CHG: - #ifdef LED_ENABLE - led_chmode(); - #endif - return false; - } - } - return true; -}; -#endif diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/readme.md b/keyboards/40percentclub/ut47/keymaps/nordic/readme.md deleted file mode 100644 index 4b0d0eb1223..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/nordic/readme.md +++ /dev/null @@ -1,33 +0,0 @@ -# UT47 Nordic keymap - - -![UT47 Nordic layout image](https://i.imgur.com/ZNtF4wA.png) - -[KLE - Nordic layout](http://www.keyboard-layout-editor.com/##@_name=UT47%20-%20Nordic%20layout&author=neonSpork%3B&@_a:7%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Backspace%3B&@_c=%23c75656&a:4&w:1.25%3B&=%0A%0A%0AL3%0A%0A%0A%0A%0A%0ATab&_c=%23cccccc&a:7%3B&=A&=S&=D&=F&=G&=H&=J&=K&=L&='&_a:4&w:1.25%3B&=Enter%0A%0A%0ARShift%3B&@_a:7&w:1.5%3B&=LShift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F&uarr%2F%3B&_c=%23bb45c4%3B&=L4%3B&@_c=%23cccccc%3B&=LCtrl&=LGUI&_c=%23bb45c4%3B&=L4&_c=%23cccccc%3B&=LAlt&_c=%2333aaff&w:1.25%3B&=L2&_c=%23cccccc&w:2%3B&=Space&_c=%23f5b047&w:1.25%3B&=L1&_c=%23cccccc%3B&=RCtrl&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&rarr%2F%3B%3B&@_y:0.25&c=%23f5b047%3B&=%7C&=1&=2&=3&=4&=5&=6&=7&=8&=9&=0&_w:1.5%3B&=Delete%3B&@_w:1.25%3B&=&=&=&=&=&=&=&=&=+&=%2F=&=*&_w:1.25%3B&=%2F%2F%3B&@_w:1.5%3B&=&=&=&=&=&=&=&=&=-&=%2F_&=PgUp&=%3B&@=&=&=&=Caps&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&=Home&=PgDn&=End%3B&@_y:0.25&c=%2333aaff%3B&=%C2%A7&=!&=%22&=%23&=%C2%A4&=%25&=%2F&&=%2F%2F&=%2F=&=+&=%5C&_w:1.5%3B&=Delete%3B&@_w:1.25%3B&=&=&=%3F&=%7B&=%5B&=(&=)&=%5D&=%7D&=F10&=F11&_w:1.25%3B&=F12%3B&@_w:1.5%3B&=&=F1&=F2&=F3&=F4&=F5&=F6&=F7&=F8&=F9&=PgUp&=%3B&@=&=&=&=Caps&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&=Home&=PgDn&=End%3B&@_y:0.25&c=%23c75656%3B&=Esc&=Calc&_a:5%3B&=www%0A%0A%0A%0A%0A%0Ahome&=My%0A%0A%0A%0A%0A%0AComp&=www%0A%0A%0A%0A%0A%0ARefresh&_a:7%3B&=&=&=&=&=&=PrtScr&_w:1.5%3B&=Ctr%20Alt%20Del%3B&@_w:1.25%3B&=&=&=&=&=&=&=&=VolDn&=VolUp&=&=&_w:1.25%3B&=%3B&@_w:1.5%3B&=&=LEDtg&=LEDch&=&=&=RESET&=&=Mute&=&_a:5%3B&=Mouse%0AClick%0A%0A%0A%0A%0ALeft&=Mouse%0A%0A%0A%0A%0A%0AUp&=Mouse%0AClick%0A%0A%0A%0A%0ARight%3B&@_a:7%3B&=&=&=&=&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&_a:5%3B&=Mouse%0A%0A%0A%0A%0A%0ALeft&=Mouse%0A%0A%0A%0A%0A%0ADown&=Mouse%0A%0A%0A%0A%0A%0ARight%3B&@_y:0.25&c=%23bb45c4&a:7%3B&=&=&=%2F@&=%C2%A3&=$&=~&=&=%C2%A8&=%C2%B4&=%60&=%C3%85&_w:1.5%3B&=%3B&@_w:1.25%3B&=&=&=&=%E2%82%AC&=&=&=&=&=%5E&=%C3%98&=%C3%86&_w:1.25%3B&=%3B&@_w:1.5%3B&=&=%3C&=&=&=&=&=&=%C2%B5&=&=&=&=%3B&@=&=&=&=&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&_c=%2345b564&a:5%3B&=L5%0A%0A%0A%0A%0A%0AON&_c=%23bb45c4&a:7%3B&=&=&=%3B&@_y:0.25&c=%2345b564%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=F1&=F2&=F3&=F4&_w:1.5%3B&=Alt%20Tab%3B&@_w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=F5&=F6&=F7&=F8&_w:1.25%3B&=Enter%3B&@_w:1.5%3B&=Shift&=1&=2&=3&=4&=5&=6&=F9&=F10&=F11&=%2F&uarr%2F%3B&_c=%23cccccc&a:5%3B&=L5%0A%0A%0A%0A%0A%0AOFF%3B&@_c=%2345b564&a:7%3B&=LCtrl&=Z&=X&=C&_w:1.25%3B&=B&_w:2%3B&=Space&_w:1.25%3B&=M&=V&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&rarr%2F) - - -Chose to modify the layout to include dedicated arrows on the bottom right. Layers 1-4 are modifiers, layer 5 is a toggle on gaming mode. Tab is dual function: Tap for Tab and hold for L3. So is enter: tap for Enter and hold for Right shift. - -### Nordic characters -On its own modifier layer, accessed from left (between left GUI and ALT) or right (above Right arrow) - -### Gaming layer -Toggled on/off, accessed via the Nordic layer. - -Toggle on: L4+RCtrl - -Toggle off: L4 (above →) - -### LED Controls - -Use TAB+Z to cycle through brightness (8 steps) - -Use TAB+X to cycle through the following LED modes: - -- solid -- breathing -- random -- rain -- reactive -- poptang -- off diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/config.h b/keyboards/40percentclub/ut47/keymaps/rgb/config.h deleted file mode 100644 index 791147b5bfd..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/rgb/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here -#define RGBLIGHT_ANIMATIONS -#define RGB_DI_PIN D3 // The pin the LED strip is connected to -#define RGBLED_NUM 7 // Number of LEDs in your strip diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c deleted file mode 100644 index 77fa5b4017f..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - -#define LT3_TAB LT(3, KC_TAB) -#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT) - -enum custom_keycodes { - LED_TOG = SAFE_RANGE, - LED_CHG -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT, - KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), - -LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - -LAYOUT( - KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, - _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END -), - -LAYOUT( /* Tab */ - KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R -), -}; - -//LED keymap functions - #ifdef LED_ENABLE -void led_chmode(void) { - serial_send(101); -} - -void led_toggle(void) { - serial_send(100); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case LED_TOG: - #ifdef LED_ENABLE - led_toggle(); - #endif - return false; - case LED_CHG: - #ifdef LED_ENABLE - led_chmode(); - #endif - return false; - } - } - return true; -}; -#endif diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/readme.md b/keyboards/40percentclub/ut47/keymaps/rgb/readme.md deleted file mode 100644 index 00076bfc497..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/rgb/readme.md +++ /dev/null @@ -1 +0,0 @@ -WS2812B LED added and connected to pin D3 as described here: https://www.40percent.club/2018/04/gnap-underglow.html diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/rules.mk b/keyboards/40percentclub/ut47/keymaps/rgb/rules.mk deleted file mode 100644 index 1e3cebb1451..00000000000 --- a/keyboards/40percentclub/ut47/keymaps/rgb/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = yes diff --git a/keyboards/40percentclub/ut47/led.c b/keyboards/40percentclub/ut47/led.c deleted file mode 100644 index 9458c038fef..00000000000 --- a/keyboards/40percentclub/ut47/led.c +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1<. -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - -#ifdef LED_ENABLE - serial_init(); -#endif -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow). - -### Layout - -Go to the [default layout README](keymaps/default/readme.md) for more information. - -### Additional info - -Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap) - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -### Build Guide - -[u/network_operations' build guide thread](https://www.reddit.com/r/MechanicalKeyboards/comments/7wqktu/gnap_the_cheap_40/) diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk deleted file mode 100644 index 7495f5edda1..00000000000 --- a/keyboards/40percentclub/ut47/rules.mk +++ /dev/null @@ -1,87 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC += matrix.c protocol/serial_uart.c - -ifeq ($(strip $(LED_ENABLE)), yes) - OPT_DEFS += -DLED_ENABLE - SRC += led.c -endif diff --git a/keyboards/40percentclub/ut47/ut47.c b/keyboards/40percentclub/ut47/ut47.c deleted file mode 100644 index f467fd130ab..00000000000 --- a/keyboards/40percentclub/ut47/ut47.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "ut47.h" -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - if (record->event.pressed) { - #ifdef LED_ENABLE - serial_send((record->event.key.row*16)+record->event.key.col); - #endif - } - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/40percentclub/ut47/ut47.h b/keyboards/40percentclub/ut47/ut47.h deleted file mode 100644 index f6456fe911b..00000000000 --- a/keyboards/40percentclub/ut47/ut47.h +++ /dev/null @@ -1,46 +0,0 @@ -/* Copyright 2018 Carlos Filoteo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K37, K38, K39, K3a, K3b \ -) \ - { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \ - { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b } \ - } - -#define LAYOUT_kc( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ - K30, K31, K32, K33, K34, K35, K37, K38, K39, K3a, K3b \ -) \ - LAYOUT( \ - KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, \ - KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, \ - KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, \ - KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b \ - ) - -#define LAYOUT_kc_ut47 LAYOUT_kc diff --git a/keyboards/6ball/6ball.c b/keyboards/6ball/6ball.c deleted file mode 100644 index 5060a5db46a..00000000000 --- a/keyboards/6ball/6ball.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "6ball.h" - -void matrix_init_kb(void) { - matrix_init_user(); -} diff --git a/keyboards/6ball/6ball.h b/keyboards/6ball/6ball.h deleted file mode 100644 index 234235341dc..00000000000 --- a/keyboards/6ball/6ball.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef SIXBALL_H -#define SIXBALL_H - -#include "quantum.h" - -#define LAYOUT( \ - k01, k02, k03, \ - k04, k05, k06 \ -) \ -{ \ - { k02, k03, k06, k05, k04, k01 } \ -} - -#endif diff --git a/keyboards/6ball/config.h b/keyboards/6ball/config.h deleted file mode 100644 index b0e59f20c65..00000000000 --- a/keyboards/6ball/config.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x0007 -#define DEVICE_VER 0x0001 -#define MANUFACTURER That-Canadian -#define PRODUCT 6-Ball -#define DESCRIPTION 6-Ball Macropuck - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 6 - -/* pin-out */ -#define MATRIX_ROW_PINS { F5 } -#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 } -#define UNUSED_PINS - -/* ws2812 RGB LED */ -#define RGB_DI_PIN F7 - -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 6 // Number of LEDs - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define TAPPING_TERM 200 - -#endif diff --git a/keyboards/6ball/keymaps/default/keymap.c b/keyboards/6ball/keymaps/default/keymap.c deleted file mode 100644 index 5081161e38b..00000000000 --- a/keyboards/6ball/keymaps/default/keymap.c +++ /dev/null @@ -1,22 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _MAIN 0 -#define _FN 1 - -#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen -#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen -#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen -#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen -#define KC_X0 LT(_FN, KC_ESC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_MAIN] = LAYOUT( - KC_F, KC_X0, KC_LCTL, - KC_R, KC_D, KC_M - ), - - [_FN] = LAYOUT( - KC_F, KC_TRNS, RGB_HUI, - RGB_TOG, RGB_MOD, RGB_HUD - ) -}; diff --git a/keyboards/6ball/keymaps/default/rules.mk b/keyboards/6ball/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/6ball/readme.md b/keyboards/6ball/readme.md deleted file mode 100644 index c9548453a93..00000000000 --- a/keyboards/6ball/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -6-Ball -====== - -A circular 6-key macropad made by ThatCanadian. - -Keyboard Maintainer: QMK Community -Hardware Supported: Pro Micro ATmega32U4 -Hardware Availability: ThatCanadian - -Make example for this keyboard (after setting up your build environment): - - make 6ball:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/6ball/rules.mk b/keyboards/6ball/rules.mk deleted file mode 100644 index 46f733b873d..00000000000 --- a/keyboards/6ball/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/8pack/8pack.c b/keyboards/8pack/8pack.c deleted file mode 100644 index e89d7281de4..00000000000 --- a/keyboards/8pack/8pack.c +++ /dev/null @@ -1 +0,0 @@ -#include "8pack.h" diff --git a/keyboards/8pack/8pack.h b/keyboards/8pack/8pack.h deleted file mode 100644 index 1c4ffb55b85..00000000000 --- a/keyboards/8pack/8pack.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -#include "quantum.h" - -#ifdef KEYBOARD_8pack_rev11 - #include "rev11.h" -#endif - -#ifdef KEYBOARD_8pack_rev12 - #include "rev12.h" -#endif \ No newline at end of file diff --git a/keyboards/8pack/config.h b/keyboards/8pack/config.h deleted file mode 100644 index 88bd1f351bc..00000000000 --- a/keyboards/8pack/config.h +++ /dev/null @@ -1,39 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2171 -#define MANUFACTURER Charles Garcia -#define PRODUCT 8-Pack - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* key matrix pins */ - -#define DIRECT_PINS { { F4, F5, F6, F7 }, { B1, B3, B2, B6 } } - -#define BACKLIGHT_LED_COUNT 8 -#undef BACKLIGHT_PIN -#define BACKLIGHT_PINS { D1, D0, D4, C6, D7, E6, B4, B5 } -#define BACKLIGHT_LEVELS 8 - -// ws2812 options -#define RGB_DI_PIN D2 // pin the DI on the ws2812 is hooked-up to -#define RGBLED_NUM 8 // number of LEDs -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/8pack/info.json b/keyboards/8pack/info.json deleted file mode 100644 index 82122b8f799..00000000000 --- a/keyboards/8pack/info.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "keyboard_name": "8-Pack", - "url": "https://github.com/cgarcia2097/8-Pack", - "maintainer": "Charles Garcia", - "width": 4, - "height": 2, - "layouts": { - "LAYOUT": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1} - ] - } - } -} \ No newline at end of file diff --git a/keyboards/8pack/keymaps/default/keymap.c b/keyboards/8pack/keymaps/default/keymap.c deleted file mode 100644 index aa1aa917010..00000000000 --- a/keyboards/8pack/keymaps/default/keymap.c +++ /dev/null @@ -1,12 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_V, KC_C, KC_X, MO(1), - KC_A, KC_S, KC_D, KC_F - ), - [1] = LAYOUT( - RGB_TOG, RGB_RMOD, RGB_MOD, KC_NO, - RESET, BL_DEC, BL_INC, BL_TOGG - ) -}; diff --git a/keyboards/8pack/readme.md b/keyboards/8pack/readme.md deleted file mode 100644 index ad5df536a18..00000000000 --- a/keyboards/8pack/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# 8-Pack Macropad - -An open source 2x4 macropad designed by Charles Garcia. - -Keyboard Maintainer: [Charles Garcia](https://github.com/cgarcia2097) -Hardware Supported: 8-Pack Macropad PCB -Hardware Availability: [8-Pack Github](https://github.com/cgarcia2097/8-Pack) - -Make example for this keyboard (after setting up your build environment): - - make 8pack:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/8pack/rev11/config.h b/keyboards/8pack/rev11/config.h deleted file mode 100644 index 83ad51ada3b..00000000000 --- a/keyboards/8pack/rev11/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define DEVICE_VER 0x0001 diff --git a/keyboards/8pack/rev11/rev11.c b/keyboards/8pack/rev11/rev11.c deleted file mode 100644 index c54ecbe87e5..00000000000 --- a/keyboards/8pack/rev11/rev11.c +++ /dev/null @@ -1 +0,0 @@ -#include "rev11.h" diff --git a/keyboards/8pack/rev11/rev11.h b/keyboards/8pack/rev11/rev11.h deleted file mode 100644 index ebf8529ad08..00000000000 --- a/keyboards/8pack/rev11/rev11.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -#include "8pack.h" - -#define LAYOUT( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13 \ -) { \ - { K13, K12, K11, K10 }, \ - { K03, K02, K01, K00 } \ -} diff --git a/keyboards/8pack/rev11/rules.mk b/keyboards/8pack/rev11/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/8pack/rev12/config.h b/keyboards/8pack/rev12/config.h deleted file mode 100644 index 9a527501a5e..00000000000 --- a/keyboards/8pack/rev12/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define DEVICE_VER 0x0002 diff --git a/keyboards/8pack/rev12/rev12.c b/keyboards/8pack/rev12/rev12.c deleted file mode 100644 index b2d091af490..00000000000 --- a/keyboards/8pack/rev12/rev12.c +++ /dev/null @@ -1 +0,0 @@ -#include "rev12.h" diff --git a/keyboards/8pack/rev12/rev12.h b/keyboards/8pack/rev12/rev12.h deleted file mode 100644 index 3efeb06de58..00000000000 --- a/keyboards/8pack/rev12/rev12.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -#include "8pack.h" - -#define LAYOUT( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13 \ -) { \ - { K03, K02, K01, K00 }, \ - { K13, K12, K11, K10 } \ -} diff --git a/keyboards/8pack/rev12/rules.mk b/keyboards/8pack/rev12/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/8pack/rules.mk b/keyboards/8pack/rules.mk deleted file mode 100644 index 97496c8f228..00000000000 --- a/keyboards/8pack/rules.mk +++ /dev/null @@ -1,63 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes -OLED_DRIVER_ENABLE = no - -DEFAULT_FOLDER = 8pack/rev12 diff --git a/keyboards/9key/9key.c b/keyboards/9key/9key.c deleted file mode 100644 index ed8e91e73b5..00000000000 --- a/keyboards/9key/9key.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "9key.h" - -void matrix_init_kb(void) { - matrix_init_user(); -} \ No newline at end of file diff --git a/keyboards/9key/9key.h b/keyboards/9key/9key.h deleted file mode 100644 index b60dc53c008..00000000000 --- a/keyboards/9key/9key.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef NINEKEY_H -#define NINEKEY_H - -#include "quantum.h" - -#define LAYOUT( \ - k00, k01, k02, \ - k10, k11, k12, \ - k20, k21, k22 \ -) \ -{ \ - { k00, k01, k02 }, \ - { k10, k11, k12 }, \ - { k20, k21, k22 } \ -} - -#endif diff --git a/keyboards/9key/config.h b/keyboards/9key/config.h deleted file mode 100644 index 4e5a2fd45b2..00000000000 --- a/keyboards/9key/config.h +++ /dev/null @@ -1,50 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0007 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bishop Keyboards -#define PRODUCT 9Key -#define DESCRIPTION Bishop Keyboards 9Key // Charleston, SC Meetup Handout - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* 9Key PCB default pin-out */ -#define MATRIX_ROW_PINS { D1, D0, D4 } -#define MATRIX_COL_PINS { F4, F5, F6 } -#define UNUSED_PINS - -/* ws2812 RGB LED */ -#define RGB_DI_PIN F7 - -#define RGBLED_NUM 1 // Number of LEDs - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define TAPPING_TERM 200 - -#endif diff --git a/keyboards/9key/info.json b/keyboards/9key/info.json deleted file mode 100644 index cadfdbc4c29..00000000000 --- a/keyboards/9key/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "9key", - "url": "", - "maintainer": "qmk", - "width": 3, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}] - } - } -} diff --git a/keyboards/9key/keymaps/default/keymap.c b/keyboards/9key/keymaps/default/keymap.c deleted file mode 100644 index acc0350739e..00000000000 --- a/keyboards/9key/keymaps/default/keymap.c +++ /dev/null @@ -1,35 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* LAYER 0 - * ,-----------------------. - * | 1 | 2 | 3 | - * |-------+-------+-------| - * | 4 | 5/ENT | 6 | Dbl Tap 5 for Enter - * |-------+-------+-------| - * | 7/0 | 8 | 9/FN | 7/0 = Dbl Tap 7 for 0 - 9/FN = Hold 9 for FN - * `-----------------------' - */ -[0] = LAYOUT( \ - KC_1, KC_2, KC_3, \ - KC_4, KC_5, KC_6, \ - KC_7, KC_8, LT(1, KC_9) \ -), - -/* LAYER 1 - * ,-----------------------. - * | ESC | + | - | - * |-------+-------+-------| - * | BSPC | * | / | - * |-------+-------+-------| - * | 00 | . | | - * `-----------------------' - */ -[1] = LAYOUT( \ - KC_ESC, KC_PLUS, KC_MINS, \ - KC_ENTER, KC_ASTR, KC_SLSH, \ - KC_0, KC_DOT, KC_TRNS \ -) - -}; diff --git a/keyboards/9key/keymaps/tap_dance/keymap.c b/keyboards/9key/keymaps/tap_dance/keymap.c deleted file mode 100644 index a96880aa529..00000000000 --- a/keyboards/9key/keymaps/tap_dance/keymap.c +++ /dev/null @@ -1,69 +0,0 @@ -#include QMK_KEYBOARD_H - -// Tap Dance Declarations -enum tap_dances { - ENT_5 = 0, - ZERO_7, -}; - -// Macro Declarations -enum custom_keycodes { - DBL_0 = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* LAYER 0 - * ,-----------------------. - * | 1 | 2 | 3 | - * |-------+-------+-------| - * | 4 | 5/ENT | 6 | Dbl Tap 5 for Enter - * |-------+-------+-------| - * | 7/0 | 8 | 9/FN | 7/0 = Dbl Tap 7 for 0 - 9/FN = Hold 9 for FN - * `-----------------------' - */ -[0] = LAYOUT( \ - KC_1, KC_2, KC_3, \ - KC_4, TD(ENT_5), KC_6, \ - TD(ZERO_7), KC_8, LT(1, KC_9) \ -), - -/* LAYER 1 - * ,-----------------------. - * | ESC | + | - | - * |-------+-------+-------| - * | BSPC | * | / | - * |-------+-------+-------| - * | 00 | . | | - * `-----------------------' - */ -[1] = LAYOUT( \ - KC_ESC, KC_PLUS, KC_MINS, \ - KC_BSPC, KC_ASTR, KC_SLSH, \ - DBL_0, KC_DOT, KC_TRNS \ -) - -}; - -qk_tap_dance_action_t tap_dance_actions[] = { - [ENT_5] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT), - [ZERO_7] = ACTION_TAP_DANCE_DOUBLE(KC_7, KC_0) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case DBL_0: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - tap_code(KC_P0); - tap_code(KC_P0); - } - break; - - } - return true; -}; - - -void matrix_init_user(void) { -} diff --git a/keyboards/9key/keymaps/tap_dance/rules.mk b/keyboards/9key/keymaps/tap_dance/rules.mk deleted file mode 100644 index e5ddcae8d92..00000000000 --- a/keyboards/9key/keymaps/tap_dance/rules.mk +++ /dev/null @@ -1 +0,0 @@ -TAP_DANCE_ENABLE = yes diff --git a/keyboards/9key/readme.md b/keyboards/9key/readme.md deleted file mode 100644 index 89629cc8c73..00000000000 --- a/keyboards/9key/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -9key -=== - -![9key](http://i.imgur.com/a3wWc7h.jpg) -![9KeyBehind](http://i.imgur.com/2PWf5wu.jpg) - -A compact minipad (3x3) keyboard made and sold by Bishop Keyboards. - -Keyboard Maintainer: QMK Community -Hardware Supported: 9key PCB, Pro Micro ATmega32U4 -Hardware Availability: [BishopKeyboards.com](http://bishopkeyboards.com/) - -Make example for this keyboard (after setting up your build environment): - - make 9key:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/9key/rules.mk b/keyboards/9key/rules.mk deleted file mode 100644 index 9fae54fa910..00000000000 --- a/keyboards/9key/rules.mk +++ /dev/null @@ -1,69 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = yes -TAP_DANCE_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/abstract/ellipse/info.json b/keyboards/abstract/ellipse/info.json deleted file mode 100644 index 8ad50e6cae8..00000000000 --- a/keyboards/abstract/ellipse/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Ellipse", - "url": "https://abstractkb.tk/product/ellipse-rev1", - "maintainer": "AbstractKB", - "width": 3, - "height": 2.25, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}] - } - } -} \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/config.h b/keyboards/abstract/ellipse/keymaps/abstractkb/config.h deleted file mode 100644 index 3bc66cd9bdf..00000000000 --- a/keyboards/abstract/ellipse/keymaps/abstractkb/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 2 -#define RGBLIGHT_ANIMATIONS - -// place overrides here diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c b/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c deleted file mode 100644 index 8d649419d11..00000000000 --- a/keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -/*enum custom_keycodes { - MYKEY = SAFE_RANGE -};*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_MUTE, RGB_TOG, BL_TOGG, - RGB_M_SW, RGB_M_P, BL_BRTG - ) -}; - -/*bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -}*/ - -/*void matrix_init_user(void) { - -}*/ - -/*void matrix_scan_user(void) { - -}*/ - -/*void led_set_user(uint8_t usb_led) { - -}*/ - -void encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (index == 1) { /* Second encoder */ - if (clockwise) { - rgblight_increase_hue_noeeprom(); - } else { - rgblight_decrease_hue_noeeprom(); - } - } else if (index == 2) { /* Third encoder */ - if (clockwise) { - backlight_increase(); - } else { - backlight_decrease(); - } - } -} \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md b/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md deleted file mode 100644 index 5db2eb647f7..00000000000 --- a/keyboards/abstract/ellipse/keymaps/abstractkb/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# My keymap - -This was used for testing lights but will become my personal keymap \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk b/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk deleted file mode 100644 index 54a2685bf63..00000000000 --- a/keyboards/abstract/ellipse/keymaps/abstractkb/rules.mk +++ /dev/null @@ -1 +0,0 @@ -BACKLIGHT_ENABLE = yes \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/default/config.h b/keyboards/abstract/ellipse/keymaps/default/config.h deleted file mode 100644 index e406c488b5a..00000000000 --- a/keyboards/abstract/ellipse/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/abstract/ellipse/keymaps/default/keymap.c b/keyboards/abstract/ellipse/keymaps/default/keymap.c deleted file mode 100644 index ac1ec986b02..00000000000 --- a/keyboards/abstract/ellipse/keymaps/default/keymap.c +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -/*enum custom_keycodes { - MYKEY = SAFE_RANGE -};*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_A, RGB_TOG, KC_C, - KC_X, KC_Y, KC_Z - ) -}; - -/*bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -}*/ - -/*void matrix_init_user(void) { - -}*/ - -/*void matrix_scan_user(void) { - -}*/ - -/*void led_set_user(uint8_t usb_led) { - -}*/ - -void encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_O); - } else { - tap_code(KC_P); - } - } else if (index == 1) { /* Second encoder */ - if (clockwise) { - rgblight_increase_hue_noeeprom(); - } else { - rgblight_decrease_hue_noeeprom(); - } - } else if (index == 2) { - if (clockwise) { - tap_code(KC_M); - } else { - tap_code(KC_R); - } - } -} \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/default/readme.md b/keyboards/abstract/ellipse/keymaps/default/readme.md deleted file mode 100644 index e14c0c8bd56..00000000000 --- a/keyboards/abstract/ellipse/keymaps/default/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# The default keymap for Ellipse - -This keymap allows for basic testing of the keypad once assembled. -Each knob and key outputs a different standard letter keycode, -except for the middle knob which changes the hue of the RGB LEDs and when -pressed down turns off the RGB LEDs \ No newline at end of file diff --git a/keyboards/abstract/ellipse/keymaps/default/rules.mk b/keyboards/abstract/ellipse/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/abstract/ellipse/readme.md b/keyboards/abstract/ellipse/readme.md deleted file mode 100644 index 973d36f44b7..00000000000 --- a/keyboards/abstract/ellipse/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# EllipseRev1 - -![EllipseRev1](http://abstractkb.tk/wp-content/uploads/2019/03/ellipsetop.jpg) - -A small keypad with more knobs than ever before! 3 Knobs and 3 MX-style switches on one little board. - -At this time there are 2 small known issues with the Rev 1. One of which is that backlight breathing does not work, -and the other issue that has been encountered is that the post_init_user function does not seem to be called. -Hopefully these issues can be resolved soon; this QMK file is being released as orders have started to ship and they need to be configurable. - -Keyboard Maintainer: [AbstractKB](https://github.com/abstractkb) -Hardware Supported: The Abstract Ellipse Rev1 -Hardware Availability: https://abstractkb.tk - -Make example for this keyboard (after setting up your build environment): - - make abstract/ellipse/rev1:default:dfu - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h deleted file mode 100644 index a56bfba2faa..00000000000 --- a/keyboards/abstract/ellipse/rev1/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 AbstractKB - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0001 -#define DEVICE_VER 0x0001 -#define MANUFACTURER AbstractKB -#define PRODUCT EllipseRev1 -#define DESCRIPTION The Ellipse Macropad - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, C7 } -#define MATRIX_COL_PINS { F0, B6, B5 } -#define UNUSED_PINS { B0, D0, D1, D2, D4, D6, D7, F1, F4, F5, F6, F7 } - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN C6 -//#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 15 - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 3 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/*#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -)*/ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - -#define NUMBER_OF_ENCODERS 3 -#define ENCODERS_PAD_A { B2, B3, D5 } -#define ENCODERS_PAD_B { B1, B7, B4 } -#define ENCODER_RESOLUTION 2 diff --git a/keyboards/abstract/ellipse/rev1/rev1.c b/keyboards/abstract/ellipse/rev1/rev1.c deleted file mode 100644 index ae7aa640e4a..00000000000 --- a/keyboards/abstract/ellipse/rev1/rev1.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "rev1.h" - -/*void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -}*/ \ No newline at end of file diff --git a/keyboards/abstract/ellipse/rev1/rev1.h b/keyboards/abstract/ellipse/rev1/rev1.h deleted file mode 100644 index de8b9bacb6c..00000000000 --- a/keyboards/abstract/ellipse/rev1/rev1.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2019 AbstractKB - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K00, K01, K02, \ - K10, K11, K12 \ -) \ -{ \ - { K00, K01, K02 }, \ - { K10, K11, K12 }, \ -} - diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk deleted file mode 100644 index 880d40e49be..00000000000 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -ENCODER_ENABLE = yes # Enable support for rotary encoders diff --git a/keyboards/acr60/acr60.c b/keyboards/acr60/acr60.c deleted file mode 100644 index 8a76020e547..00000000000 --- a/keyboards/acr60/acr60.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "acr60.h" -#include "led.h" - -void matrix_init_kb(void) { - // Keyboard start-up code goes here - // Runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // Looping keyboard code goes here - // This runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // Set caps lock LED pin as output - DDRB |= (1 << 2); - // Default to off - PORTB |= (1 << 2); -} - -void led_set_kb(uint8_t usb_led) { - // Code for caps lock LED as reported by the OS - // Set this per keymap, instead of globally - led_set_user(usb_led); -} diff --git a/keyboards/acr60/acr60.h b/keyboards/acr60/acr60.h deleted file mode 100644 index 9a2d59f6344..00000000000 --- a/keyboards/acr60/acr60.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef ARC60_H -#define ARC60_H - -#include "quantum.h" - -#define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_hhkb( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K401, K403, K406, K411, K413 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { KC_NO, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, KC_NO, K411, KC_NO, K413, KC_NO } \ -} - -#define LAYOUT_true_hhkb( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K401, K403, K406, K410, K411 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { KC_NO, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, KC_NO, KC_NO } \ -} - -#define LAYOUT_2_shifts( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_directional( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312, K313, K314, \ - K400, K401, K403, K404, K406, K408, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, KC_NO, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -/* Mitch's keymap, "MitchSplit": - * Standard 60% base, split right shift, 3-split space, standard modifier row. - * Split shift is 2.75u + 1.25u + 2.25u (total of 6.25u). Might not work with other orientations. - */ -/* - * ,-----------------------------------------------------------------------------------------. - * |K000 |K001 |K002 |K003 |K004 |K005 |K006 |K007 |K008 |K009 |K010 |K011 |K012 | K014 | - * |-----------------------------------------------------------------------------------------+ - * | K100 |K102 |K103 |K104 |K105 |K106 |K107 |K108 |K109 |K110 |K111 |K112 |K113 | K114 | - * |-----------------------------------------------------------------------------------------+ - * | K200 |K202 |K203 |K204 |K205 |K206 |K207 |K208 |K209 |K210 |K211 |K212 | K213 | - * |-----------------------------------------------------------------------------------------+ - * | K300 |K302 |K303 |K304 |K305 |K306 |K307 |K308 |K309 |K310 |K311 | K313 |K314 | - * |-----------------------------------------------------------------------------------------+ - * | K400 | K401 | K403 | K404 | K406 | K408 | K410 | K411 | K413 | K414 | - * `-----------------------------------------------------------------------------------------' - */ -#define LAYOUT_mitchsplit( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K404, K406, K408, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} - -#endif diff --git a/keyboards/acr60/config.h b/keyboards/acr60/config.h deleted file mode 100644 index 9b2b2a2f00d..00000000000 --- a/keyboards/acr60/config.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xCA60 -#define DEVICE_VER 0x0001 -#define MANUFACTURER MECHKEYS -#define PRODUCT ACR60 -#define DESCRIPTION 60% customizable keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B6 -#define BACKLIGHT_LEVELS 5 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/acr60/info.json b/keyboards/acr60/info.json deleted file mode 100644 index 660c357990a..00000000000 --- a/keyboards/acr60/info.json +++ /dev/null @@ -1,33 +0,0 @@ -{ - "keyboard_name": "ACR60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "key_count": 67, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":1.25}, {"label":"K301", "x":1.25, "y":3}, {"label":"K302", "x":2.25, "y":3}, {"label":"K303", "x":3.25, "y":3}, {"label":"K304", "x":4.25, "y":3}, {"label":"K305", "x":5.25, "y":3}, {"label":"K306", "x":6.25, "y":3}, {"label":"K307", "x":7.25, "y":3}, {"label":"K308", "x":8.25, "y":3}, {"label":"K309", "x":9.25, "y":3}, {"label":"K310", "x":10.25, "y":3}, {"label":"K311", "x":11.25, "y":3}, {"label":"K313", "x":12.25, "y":3, "w":1.75}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K404", "x":3.75, "y":4, "w":2.25}, {"label":"K406", "x":6, "y":4, "w":1.25}, {"label":"K408", "x":7.25, "y":4, "w":2.75}, {"label":"K410", "x":10, "y":4}, {"label":"K411", "x":11, "y":4}, {"label":"K412", "x":12, "y":4}, {"label":"K413", "x":13, "y":4}, {"label":"K414", "x":14, "y":4}] - }, - "LAYOUT_hhkb": { - "key_count": 61, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":1.25}, {"label":"K301", "x":1.25, "y":3}, {"label":"K302", "x":2.25, "y":3}, {"label":"K303", "x":3.25, "y":3}, {"label":"K304", "x":4.25, "y":3}, {"label":"K305", "x":5.25, "y":3}, {"label":"K306", "x":6.25, "y":3}, {"label":"K307", "x":7.25, "y":3}, {"label":"K308", "x":8.25, "y":3}, {"label":"K309", "x":9.25, "y":3}, {"label":"K310", "x":10.25, "y":3}, {"label":"K311", "x":11.25, "y":3}, {"label":"K313", "x":12.25, "y":3, "w":1.75}, {"label":"K314", "x":14, "y":3}, {"label":"K401", "x":1.5, "y":4}, {"label":"K403", "x":2.5, "y":4, "w":1.5}, {"label":"K406", "x":4, "y":4, "w":7}, {"label":"K411", "x":11, "y":4, "w":1.5}, {"label":"K413", "x":12.5, "y":4}] - }, - "LAYOUT_true_hhkb": { - "key_count": 61, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":1.25}, {"label":"K301", "x":1.25, "y":3}, {"label":"K302", "x":2.25, "y":3}, {"label":"K303", "x":3.25, "y":3}, {"label":"K304", "x":4.25, "y":3}, {"label":"K305", "x":5.25, "y":3}, {"label":"K306", "x":6.25, "y":3}, {"label":"K307", "x":7.25, "y":3}, {"label":"K308", "x":8.25, "y":3}, {"label":"K309", "x":9.25, "y":3}, {"label":"K310", "x":10.25, "y":3}, {"label":"K311", "x":11.25, "y":3}, {"label":"K313", "x":12.25, "y":3, "w":1.75}, {"label":"K314", "x":14, "y":3}, {"label":"K401", "x":1.5, "y":4}, {"label":"K403", "x":2.5, "y":4, "w":1.5}, {"label":"K406", "x":4, "y":4, "w":6}, {"label":"K410", "x":10, "y":4, "w":1.5}, {"label":"K411", "x":11.5, "y":4}] - }, - "LAYOUT_2_shifts": { - "key_count": 68, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3}, {"label":"K301", "x":1, "y":3}, {"label":"K302", "x":2, "y":3}, {"label":"K303", "x":3, "y":3}, {"label":"K304", "x":4, "y":3}, {"label":"K305", "x":5, "y":3}, {"label":"K306", "x":6, "y":3}, {"label":"K307", "x":7, "y":3}, {"label":"K308", "x":8, "y":3}, {"label":"K309", "x":9, "y":3}, {"label":"K310", "x":10, "y":3}, {"label":"K311", "x":11, "y":3}, {"label":"K312", "x":12, "y":3}, {"label":"K313", "x":13, "y":3}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K404", "x":3.75, "y":4, "w":2.25}, {"label":"K406", "x":6, "y":4, "w":1.25}, {"label":"K408", "x":7.25, "y":4, "w":2.75}, {"label":"K410", "x":10, "y":4}, {"label":"K411", "x":11, "y":4}, {"label":"K412", "x":12, "y":4}, {"label":"K413", "x":13, "y":4}, {"label":"K414", "x":14, "y":4}] - }, - "LAYOUT_directional": { - "key_count": 67, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":1.25}, {"label":"K301", "x":1.25, "y":3}, {"label":"K302", "x":2.25, "y":3}, {"label":"K303", "x":3.25, "y":3}, {"label":"K304", "x":4.25, "y":3}, {"label":"K305", "x":5.25, "y":3}, {"label":"K306", "x":6.25, "y":3}, {"label":"K307", "x":7.25, "y":3}, {"label":"K308", "x":8.25, "y":3}, {"label":"K309", "x":9.25, "y":3}, {"label":"K310", "x":10.25, "y":3}, {"label":"K312", "x":11.25, "y":3, "w":1.75}, {"label":"K313", "x":13, "y":3}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K404", "x":3.75, "y":4, "w":2.25}, {"label":"K406", "x":6, "y":4, "w":1.25}, {"label":"K408", "x":7.25, "y":4, "w":2.75}, {"label":"K410", "x":10, "y":4}, {"label":"K411", "x":11, "y":4}, {"label":"K412", "x":12, "y":4}, {"label":"K413", "x":13, "y":4}, {"label":"K414", "x":14, "y":4}] - }, - "LAYOUT_mitchsplit": { - "key_count": 64, - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K014", "x":13, "y":0, "w":2}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":2.25}, {"label":"K302", "x":2.25, "y":3}, {"label":"K303", "x":3.25, "y":3}, {"label":"K304", "x":4.25, "y":3}, {"label":"K305", "x":5.25, "y":3}, {"label":"K306", "x":6.25, "y":3}, {"label":"K307", "x":7.25, "y":3}, {"label":"K308", "x":8.25, "y":3}, {"label":"K309", "x":9.25, "y":3}, {"label":"K310", "x":10.25, "y":3}, {"label":"K311", "x":11.25, "y":3}, {"label":"K313", "x":12.25, "y":3, "w":1.75}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K404", "x":3.75, "y":4, "w":2.75}, {"label":"K406", "x":6.5, "y":4, "w":1.25}, {"label":"K408", "x":7.75, "y":4, "w":2.25}, {"label":"K410", "x":10, "y":4, "w":1.25}, {"label":"K411", "x":11.25, "y":4, "w":1.25}, {"label":"K413", "x":12.5, "y":4, "w":1.25}, {"label":"K414", "x":13.75, "y":4, "w":1.25}] - } - } -} diff --git a/keyboards/acr60/keymaps/default/keymap.c b/keyboards/acr60/keymaps/default/keymap.c deleted file mode 100644 index aafc1dfe68f..00000000000 --- a/keyboards/acr60/keymaps/default/keymap.c +++ /dev/null @@ -1,67 +0,0 @@ -#include QMK_KEYBOARD_H - -#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -enum custom_keycodes { - SFT_ESC = SAFE_RANGE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* - * Default keymap with standard 60% layout. Split space possible but entirely optional with this layout, as this - * layout covers all three split space keys as space keycodes. This also has alt right next to the space bar - * on both sides (Windows keyboard layout), no right-side system/GUI key, and momentary layer switching on - * the right modifiers into the 3rd (macro) and 2nd (function/sfx) layers, respectively. This also has the grave - * accent key set up on the 2nd layer, although on the first layer it includes grave key (tilde) when shift is held down, - * via the function actions code at the bottom. - */ - LAYOUT( - SFT_ESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(2), KC_NO, MO(1), KC_RCTL), - - LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - LAYOUT( - KC_TRNS, M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), M(10), M(11), M(12), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case SFT_ESC: - if (record->event.pressed) { - if (get_mods() & MODS_SHIFT_MASK) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (get_mods() & MODS_SHIFT_MASK) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - - return false; - - default: - return true; - } -} diff --git a/keyboards/acr60/keymaps/mitch/keymap.c b/keyboards/acr60/keymaps/mitch/keymap.c deleted file mode 100644 index b7fcb5a04a8..00000000000 --- a/keyboards/acr60/keymaps/mitch/keymap.c +++ /dev/null @@ -1,205 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _DFT 0 -#define _NGUI 1 -#define _FN 2 -#define _SFX 3 - -// Fillers to make layering more clear -#define ______ KC_TRNS -#define bbbbbb KC_NO -#define GUIOFF MAGIC_NO_GUI -#define GUION MAGIC_UNNO_GUI - -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -/* TODO: create handy quick-ref list here for easy grokking of the actual shortcuts in place */ - -/* - * This is Mitch's default ACR60 layout (also DZ60, on which the ACR60 is based). This is a - * Mac-oriented layout, as noted by the GUI keys immediately next to the space bar area of the - * lower modifier row. This uses the LAYOUT_mitchsplit keymap as defined in arc60.h, which - * uses a 3-split space bar and a split right shift. Otherwise it's a standard 60% layout (for - * now). - * - * For me, this is a great place to start getting used to a split key setup and still mostly - * sticking to a standard staggered 60% layout so my entire game isn't thrown off. - * - * Layers (0-based index because we're devs!): - * - * 0: Default QWERTY layer - * Note Fn and Alt keys on the right side of the spacebar, not sure if those are - * normal position but that's what I'm used to at this point. YMMV - * - * 1: Function Layer - * Function keys, Grave Key, Delete, Caps lock on the tab, media keys, and directional - * keys. Also you can hit the Alt key position to switch (and lock) into the 3rd layer - * if you really want to mess with your SFX for a bit. - * - * 2: Special Effects Layer - * RGB and backlight settings access. RGB cycle on "S" key position and if locked into - * the third layer you can hold shift to cycle backwards (see notes below). Bootloader - * access is on this layer. If layer locked, hit right Alt key to get back to layer 0. - * - * The keymap layer definitions below look pretty bad when soft-wrapped by your IDE / text editor. - * Be sure to disable wrapping to make things more readable with lines preserved. - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0 - * ,-----------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | - * |-----------------------------------------------------------------------------------------+ - * | Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | - * |-----------------------------------------------------------------------------------------+ - * | LCtrl | LAlt | LGUI | Space | Space| Space | RGUI | Fn | RAlt | RCtrl | - * `-----------------------------------------------------------------------------------------' - */ -/* Qwerty gui/alt/space/alt/gui / - * - * Hit MO(_FN) and Alt in that order to lock into the _FN layer. - */ - [_DFT] = LAYOUT_mitchsplit( /* Basic QWERTY */ - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(_FN), LT(_SFX, KC_RALT),KC_RCTL \ - ), - -/* Gaming - * ,-----------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | |BLOCKED| | | |BLOCKED| | | | - * `-----------------------------------------------------------------------------------------' - */ -/* I disable the GUI / System key for gaming, as usually that's windows and I hit that at the most - * inopportune moments. And games don't use the windows key. I'd use the Bootmagic MAGIC_NO_GUI and - * MAGIC_UNNO_GUI keycodes, but that actually disables it and has it persist beyond disconnection - * of the board. That's less convenient (and more confusing) for me than this approach, which is - * basically just blocking the GUI keys when this layer is active and not letting them flow through - * to the default layer. - */ - /* Layer 2: "special effects": RGB lighting, backlighting, bootloader */ - [_NGUI] = LAYOUT_mitchsplit( - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, bbbbbb, ______, ______, ______, bbbbbb, ______, ______, ______ \ - ), - -/* Fn Layer / Layer 1 - * ,-----------------------------------------------------------------------------------------. - * |KC_GRV| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Del | - * |-----------------------------------------------------------------------------------------+ - * | CAPS | | | | | |Home | Pgup| Up | PgDn| End | | | | - * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | | Left| Down|Right| | | | - * |-----------------------------------------------------------------------------------------+ - * | |Prev |Play |Next | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | LrSfx | | - * `-----------------------------------------------------------------------------------------' - */ -/* - * Pok3r-style layer switching on M and "," keys (_DFT and _NGUI layers, respectively). Note that - * these don't enable/disable those layers (i.e. latching keys), they actually switch to that layer. - * To go to the _NGUI layer, Fn+comma, to go to _DFT from _NGUI, hit Fn+M. - */ - /* Layer 1: Functions, primary layer switching, media controls, directional */ - [_FN] = LAYOUT_mitchsplit( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_CAPS, bbbbbb, bbbbbb, bbbbbb, bbbbbb, bbbbbb, KC_HOME, KC_PGUP, KC_UP , KC_PGDOWN,KC_END, bbbbbb, bbbbbb, bbbbbb, \ - ______, KC_VOLD, KC_VOLU, KC_MUTE, bbbbbb, bbbbbb, bbbbbb, KC_LEFT, KC_DOWN, KC_RIGHT, bbbbbb, bbbbbb, ______, \ - ______, KC_MPRV, KC_MPLY, KC_MNXT, bbbbbb, bbbbbb, bbbbbb,TO(_DFT),TO(_NGUI), bbbbbb, bbbbbb, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______,TG(_SFX),______ \ - ), - -/* Special Effects Layer / Layer 2 - * ,-----------------------------------------------------------------------------------------. - * | |Plain|Brth |Rnbw |Swirl|Snake|Knght|Xmas |Grdnt| | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | BL |BLSTEP| BL- | BL+ | | | | | | | | |Bootldr | - * |-----------------------------------------------------------------------------------------+ - * | | RGBT| RGBM| | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | |LrDflt | | - * `-----------------------------------------------------------------------------------------' - */ -/* Tap RAlt to get back to default layer (0). - * - * See https://docs.qmk.fm/feature_rgblight.html#rgblight-keycodes for details about - * RGB codes. Quick summary, though: - * - * RGB_MODE_PLAIN RGB_M_P Switch to the static no animation mode - * RGB_MODE_BREATHE RGB_M_B Switch to the breathing mode - * RGB_MODE_RAINBOW RGB_M_R Switch to the rainbow mode (cycles through colors) - * RGB_MODE_SWIRL RGB_M_SW Switch to the swirl mode (like an animated gradient) - * RGB_MODE_SNAKE RGB_M_SN Switch to the snake mode - * RGB_MODE_KNIGHT RGB_M_K Switch to the knight animation - * RGB_MODE_XMAS RGB_M_X Switch to the Christmas animation - * RGB_MODE_GRADIENT RGB_M_G Switch to the static gradient mode - * - * Note that there are more animation variations, usually timer-based variations, by using the - * "S" key to cycle through modes. Use one of the deciated keys to get to - * the general mode where you want it, then cycle through variations of that mode to get - * something specific more quickly. - */ - /* Layer 2: "special effects": RGB lighting, backlighting, bootloader */ - [_SFX] = LAYOUT_mitchsplit( - ______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_M_X, RGB_M_G,______, ______, ______, ______, ______, \ - ______, BL_TOGG, BL_STEP, BL_DEC, BL_INC, ______, ______, ______, ______, ______, ______, ______, ______, RESET, \ - ______, RGB_TOG, RGB_MOD,______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______,TO(_DFT),______ \ - ) - -}; - -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/acr60/readme.md b/keyboards/acr60/readme.md deleted file mode 100644 index 54ea265f1c9..00000000000 --- a/keyboards/acr60/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -ACR60 -===== - -![acr60](https://cdn.shopify.com/s/files/1/1697/5323/products/20170522001035_1024x1024.jpg?v=1504725199) - -A customizable 60% keyboard made and sold by mechkeys.ca [More info on MECHKEYS](https://mechkeys.ca) - -Keyboard Maintainer: [TurboMech](https://github.com/TurboMech) - -Hardware Supported: ACR60 - -Hardware Availability: [MECHKEYS](https://mechkeys.ca/products/acr60) - -Make example for this keyboard (after setting up your build environment): - - make acr60:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/acr60/rules.mk b/keyboards/acr60/rules.mk deleted file mode 100644 index 9c4082da29f..00000000000 --- a/keyboards/acr60/rules.mk +++ /dev/null @@ -1,56 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes \ No newline at end of file diff --git a/keyboards/adkb96/adkb96.c b/keyboards/adkb96/adkb96.c deleted file mode 100644 index 9a1c85a2ce4..00000000000 --- a/keyboards/adkb96/adkb96.c +++ /dev/null @@ -1,19 +0,0 @@ -#include "adkb96.h" - -#ifdef SWAP_HANDS_ENABLE -__attribute__ ((weak)) -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}, {6, 6}, {7, 6}}, - {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}, {6, 7}, {7, 7}}, - {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8}, {6, 8}, {7, 8}}, - {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9}, {6, 9}, {7, 9}}, - {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}, {6,10}, {7,10}}, - {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}, {6,11}, {7,11}}, - {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}, {6, 0}, {7, 0}}, - {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}, {6, 1}, {7, 1}}, - {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}, {6, 2}, {7, 2}}, - {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}, {6, 3}, {7, 3}}, - {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}, {6, 4}, {7, 4}}, - {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}, {6, 5}, {7, 5}} -}; -#endif diff --git a/keyboards/adkb96/adkb96.h b/keyboards/adkb96/adkb96.h deleted file mode 100644 index 4b28775006d..00000000000 --- a/keyboards/adkb96/adkb96.h +++ /dev/null @@ -1,28 +0,0 @@ -#pragma once - -#include "quantum.h" - -#ifdef KEYBOARD_adkb96_rev1 - #include "rev1.h" -#endif - - -// Used to create a keymap using only KC_ prefixed keys -#define LAYOUT_kc_ortho_6x16( \ - L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ - L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ - L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ - L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ - L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47, \ - L50, L51, L52, L53, L54, L55, L56, L57, R50, R51, R52, R53, R54, R55, R56, R57 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##L07, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, KC_##R07, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##L17, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, KC_##R17, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##L27, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, KC_##R27, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##L37, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, KC_##R37, \ - KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##L47, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, KC_##R46, KC_##R47, \ - KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, KC_##L56, KC_##L57, KC_##R50, KC_##R51, KC_##R52, KC_##R53, KC_##R54, KC_##R55, KC_##R56 ,KC_##R57 \ - ) - -#define LAYOUT_kc LAYOUT_kc_ortho_6x16 diff --git a/keyboards/adkb96/config.h b/keyboards/adkb96/config.h deleted file mode 100644 index 93fd2261b18..00000000000 --- a/keyboards/adkb96/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - diff --git a/keyboards/adkb96/info.json b/keyboards/adkb96/info.json deleted file mode 100644 index 3b914d56b17..00000000000 --- a/keyboards/adkb96/info.json +++ /dev/null @@ -1,494 +0,0 @@ -{ - "keyboard_name": "adkb96", - "url": "", - "maintainer": "qmk", - "width": 16, - "height": 6, - "layouts": { - "LAYOUT_ortho_6x16": { - "key_count": 96, - "layout": [ - { - "label": "L00", - "x": 0, - "y": 0 - }, - { - "label": "L01", - "x": 1, - "y": 0 - }, - { - "label": "L02", - "x": 2, - "y": 0 - }, - { - "label": "L03", - "x": 3, - "y": 0 - }, - { - "label": "L04", - "x": 4, - "y": 0 - }, - { - "label": "L05", - "x": 5, - "y": 0 - }, - { - "label": "L06", - "x": 6, - "y": 0 - }, - { - "label": "L07", - "x": 7, - "y": 0 - }, - { - "label": "R00", - "x": 8, - "y": 0 - }, - { - "label": "R01", - "x": 9, - "y": 0 - }, - { - "label": "R02", - "x": 10, - "y": 0 - }, - { - "label": "R03", - "x": 11, - "y": 0 - }, - { - "label": "R04", - "x": 12, - "y": 0 - }, - { - "label": "R05", - "x": 13, - "y": 0 - }, - { - "label": "R06", - "x": 14, - "y": 0 - }, - { - "label": "R07", - "x": 15, - "y": 0 - }, - { - "label": "L10", - "x": 0, - "y": 1 - }, - { - "label": "L11", - "x": 1, - "y": 1 - }, - { - "label": "L12", - "x": 2, - "y": 1 - }, - { - "label": "L13", - "x": 3, - "y": 1 - }, - { - "label": "L14", - "x": 4, - "y": 1 - }, - { - "label": "L15", - "x": 5, - "y": 1 - }, - { - "label": "L16", - "x": 6, - "y": 1 - }, - { - "label": "L17", - "x": 7, - "y": 1 - }, - { - "label": "R10", - "x": 8, - "y": 1 - }, - { - "label": "R11", - "x": 9, - "y": 1 - }, - { - "label": "R12", - "x": 10, - "y": 1 - }, - { - "label": "R13", - "x": 11, - "y": 1 - }, - { - "label": "R14", - "x": 12, - "y": 1 - }, - { - "label": "R15", - "x": 13, - "y": 1 - }, - { - "label": "R16", - "x": 14, - "y": 1 - }, - { - "label": "R17", - "x": 15, - "y": 1 - }, - { - "label": "L20", - "x": 0, - "y": 2 - }, - { - "label": "L21", - "x": 1, - "y": 2 - }, - { - "label": "L22", - "x": 2, - "y": 2 - }, - { - "label": "L23", - "x": 3, - "y": 2 - }, - { - "label": "L24", - "x": 4, - "y": 2 - }, - { - "label": "L25", - "x": 5, - "y": 2 - }, - { - "label": "L26", - "x": 6, - "y": 2 - }, - { - "label": "L27", - "x": 7, - "y": 2 - }, - { - "label": "R20", - "x": 8, - "y": 2 - }, - { - "label": "R21", - "x": 9, - "y": 2 - }, - { - "label": "R22", - "x": 10, - "y": 2 - }, - { - "label": "R23", - "x": 11, - "y": 2 - }, - { - "label": "R24", - "x": 12, - "y": 2 - }, - { - "label": "R25", - "x": 13, - "y": 2 - }, - { - "label": "R26", - "x": 14, - "y": 2 - }, - { - "label": "R27", - "x": 15, - "y": 2 - }, - { - "label": "L30", - "x": 0, - "y": 3 - }, - { - "label": "L31", - "x": 1, - "y": 3 - }, - { - "label": "L32", - "x": 2, - "y": 3 - }, - { - "label": "L33", - "x": 3, - "y": 3 - }, - { - "label": "L34", - "x": 4, - "y": 3 - }, - { - "label": "L35", - "x": 5, - "y": 3 - }, - { - "label": "L36", - "x": 6, - "y": 3 - }, - { - "label": "L37", - "x": 7, - "y": 3 - }, - { - "label": "R30", - "x": 8, - "y": 3 - }, - { - "label": "R31", - "x": 9, - "y": 3 - }, - { - "label": "R32", - "x": 10, - "y": 3 - }, - { - "label": "R33", - "x": 11, - "y": 3 - }, - { - "label": "R34", - "x": 12, - "y": 3 - }, - { - "label": "R35", - "x": 13, - "y": 3 - }, - { - "label": "R36", - "x": 14, - "y": 3 - }, - { - "label": "R37", - "x": 15, - "y": 3 - }, - { - "label": "L40", - "x": 0, - "y": 4 - }, - { - "label": "L41", - "x": 1, - "y": 4 - }, - { - "label": "L42", - "x": 2, - "y": 4 - }, - { - "label": "L43", - "x": 3, - "y": 4 - }, - { - "label": "L44", - "x": 4, - "y": 4 - }, - { - "label": "L45", - "x": 5, - "y": 4 - }, - { - "label": "L46", - "x": 6, - "y": 4 - }, - { - "label": "L47", - "x": 7, - "y": 4 - }, - { - "label": "R40", - "x": 8, - "y": 4 - }, - { - "label": "R41", - "x": 9, - "y": 4 - }, - { - "label": "R42", - "x": 10, - "y": 4 - }, - { - "label": "R43", - "x": 11, - "y": 4 - }, - { - "label": "R44", - "x": 12, - "y": 4 - }, - { - "label": "R45", - "x": 13, - "y": 4 - }, - { - "label": "R46", - "x": 14, - "y": 4 - }, - { - "label": "R47", - "x": 15, - "y": 4 - }, - { - "label": "L50", - "x": 0, - "y": 5 - }, - { - "label": "L51", - "x": 1, - "y": 5 - }, - { - "label": "L52", - "x": 2, - "y": 5 - }, - { - "label": "L53", - "x": 3, - "y": 5 - }, - { - "label": "L54", - "x": 4, - "y": 5 - }, - { - "label": "L55", - "x": 5, - "y": 5 - }, - { - "label": "L56", - "x": 6, - "y": 5 - }, - { - "label": "L57", - "x": 7, - "y": 5 - }, - { - "label": "R50", - "x": 8, - "y": 5 - }, - { - "label": "R51", - "x": 9, - "y": 5 - }, - { - "label": "R52", - "x": 10, - "y": 5 - }, - { - "label": "R53", - "x": 11, - "y": 5 - }, - { - "label": "R54", - "x": 12, - "y": 5 - }, - { - "label": "R55", - "x": 13, - "y": 5 - }, - { - "label": "R56", - "x": 14, - "y": 5 - }, - { - "label": "R57", - "x": 15, - "y": 5 - } - ] - } - } -} \ No newline at end of file diff --git a/keyboards/adkb96/keymaps/default/config.h b/keyboards/adkb96/keymaps/default/config.h deleted file mode 100644 index bef279a6d03..00000000000 --- a/keyboards/adkb96/keymaps/default/config.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* Use I2C or Serial, not both */ - -#define USE_SERIAL -//#define USE_I2C - -/* Select hand configuration */ - -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define FORCE_NKRO diff --git a/keyboards/adkb96/keymaps/default/keymap.c b/keyboards/adkb96/keymaps/default/keymap.c deleted file mode 100644 index c8198ab3359..00000000000 --- a/keyboards/adkb96/keymaps/default/keymap.c +++ /dev/null @@ -1,15 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT( - KC_ESC, XXXXXXX,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DELT, - KC_ZKHK,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_JYEN,KC_BSPC,KC_BSPC, - KC_TAB, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_ENT, KC_ENT, - KC_CAPS,KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_BSLS,KC_ENT, KC_ENT, - KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_UP, KC_RSFT,KC_RSFT, - KC_LCTL,KC_LALT,KC_LGUI,KC_MHEN,KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_HENK,KC_KANA,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT,XXXXXXX - ) -}; diff --git a/keyboards/adkb96/readme.md b/keyboards/adkb96/readme.md deleted file mode 100644 index fa5187966bb..00000000000 --- a/keyboards/adkb96/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# ADKB96 - -![ADKB96](http://btoshop.jp/wp-content/uploads/sites/3/2019/04/ADKB96_ALL.png) - -A 16x6 ortholinear keyboard kit made and sold by Bit Trade One Ltd. [More info on Web](http://bit-trade-one.co.jp/selfmadekb/adkb96/) - -Keyboard Maintainer: [Bit Trade One Ltd.](http://bit-trade-one.co.jp/) -Hardware Supported: ADKB96 PCB, Pro Micro -Hardware Availability: [PCB & case Data](https://github.com/bit-trade-one/ADKB96-hardware), [BTOS Shop](http://btoshop.jp/2019/04/11/4562469772424/) - -Make example for this keyboard (after setting up your build environment): - -```sh - make adkb96/rev1:default -``` - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h deleted file mode 100644 index cff135c261a..00000000000 --- a/keyboards/adkb96/rev1/config.h +++ /dev/null @@ -1,77 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x00a5 -#define PRODUCT_ID 0xad96 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bit Trade One -#define PRODUCT ADKB96 -#define DESCRIPTION - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 8 - -// wiring of each half -#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } -#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } - -#define SOFT_SERIAL_PIN D0 - -/* define tapping term */ -#define TAPPING_TERM 100 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -/* -#define RGB_DI_PIN D3 - -#define RGBLED_NUM 12 // Number of LEDs -*/ -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/adkb96/rev1/rev1.c b/keyboards/adkb96/rev1/rev1.c deleted file mode 100644 index 872a7e08ff0..00000000000 --- a/keyboards/adkb96/rev1/rev1.c +++ /dev/null @@ -1,15 +0,0 @@ -#include "adkb96.h" - -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - diff --git a/keyboards/adkb96/rev1/rev1.h b/keyboards/adkb96/rev1/rev1.h deleted file mode 100644 index 0ec70c5d5c9..00000000000 --- a/keyboards/adkb96/rev1/rev1.h +++ /dev/null @@ -1,44 +0,0 @@ -#pragma once - -#include "adkb96.h" - -//void promicro_bootloader_jmp(bool program); - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); - - -// Keymap with right side flipped -// (TRRS jack on both halves are to the right) -#define LAYOUT_ortho_6x16( \ - L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ - L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ - L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ - L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ - L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47, \ - L50, L51, L52, L53, L54, L55, L56, L57, R50, R51, R52, R53, R54, R55, R56, R57 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05, L06, L07 }, \ - { L10, L11, L12, L13, L14, L15, L16, L17 }, \ - { L20, L21, L22, L23, L24, L25, L26, L27 }, \ - { L30, L31, L32, L33, L34, L35, L36, L37 }, \ - { L40, L41, L42, L43, L44, L45, L46, L47 }, \ - { L50, L51, L52, L53, L54, L55, L56, L57 }, \ - { R00, R01, R02, R03, R04, R05, R06, R07 }, \ - { R10, R11, R12, R13, R14, R15, R16, R17 }, \ - { R20, R21, R22, R23, R24, R25, R26, R27 }, \ - { R30, R31, R32, R33, R34, R35, R36, R37 }, \ - { R40, R41, R42, R43, R44, R45, R46, R47 }, \ - { R50, R51, R52, R53, R54, R55, R56, R57 } \ - } - -#define LAYOUT LAYOUT_ortho_6x16 - diff --git a/keyboards/adkb96/rules.mk b/keyboards/adkb96/rules.mk deleted file mode 100644 index 04986eb6788..00000000000 --- a/keyboards/adkb96/rules.mk +++ /dev/null @@ -1,78 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection - # Teensy halfkay - # Pro Micro caterina - # Atmel DFU atmel-dfu - # LUFA DFU lufa-dfu - # QMK DFU qmk-dfu - # atmega32a bootloadHID -BOOTLOADER = caterina - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -SPLIT_KEYBOARD = yes - -DEFAULT_FOLDER = adkb96/rev1 diff --git a/keyboards/aeboards/aegis/aegis.c b/keyboards/aeboards/aegis/aegis.c deleted file mode 100644 index ccff6d62c94..00000000000 --- a/keyboards/aeboards/aegis/aegis.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/aeboards/aegis/aegis.h b/keyboards/aeboards/aegis/aegis.h deleted file mode 100644 index 95ffb73dde0..00000000000 --- a/keyboards/aeboards/aegis/aegis.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "quantum.h" - -#define _____ KC_NO - -#define LAYOUT_aegis( \ - K0000, K0100, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, K0106, K0007, K0107, K0008, \ - K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, K0207, K0307, K0208, K0308, K0108, \ - K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, K0407, K0507, K0408, K0508, \ - K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606, K0706, K0607, K0707, K0608, \ - K0800, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, K0906, K0807, K0907, K0808, K0908, \ - K1000, K1100, K1001, K1101, K1002, K1102, K1003, K1103, K1105, K1107, K1008, K1108 \ -) { \ - { K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, K0008 }, \ - { K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, K0108 }, \ - { K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208 }, \ - { K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308 }, \ - { K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408 }, \ - { K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508 }, \ - { K0600, K0601, K0602, K0603, K0604, K0605, K0606, K0607, K0608 }, \ - { K0700, K0701, K0702, K0703, K0704, K0705, K0706, K0707, _____ }, \ - { K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808 }, \ - { K0900, K0901, K0902, K0903, K0904, K0905, K0906, K0907, K0908 }, \ - { K1000, K1001, K1002, K1003, _____, _____, _____, _____, K1008 }, \ - { K1100, K1101, K1102, K1103, _____, K1105, _____, K1107, K1108 } \ -} diff --git a/keyboards/aeboards/aegis/config.h b/keyboards/aeboards/aegis/config.h deleted file mode 100644 index 8db31b254d3..00000000000 --- a/keyboards/aeboards/aegis/config.h +++ /dev/null @@ -1,70 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x4145 // "AE" -#define PRODUCT_ID 0x0807 // 1800 -> 0x0708 -> 0x0807 ;-) -#define DEVICE_VER 0x0001 -#define MANUFACTURER AEboards -#define PRODUCT Aegis -#define DESCRIPTION 1800 Left Handed Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F5, F6, E6, F7, D1, D0, D6, D4, B4, D7, B6, B5 } -#define MATRIX_COL_PINS { C7, C6, B7, D2, D3, B3, B2, B1, B0 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -//#define WT_MONO_BACKLIGHT - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -// Dynamic macro starts after dynamic keymaps (35+(4*12*9*2)) = (35+864) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 899 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 125 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/aeboards/aegis/keymaps/default/keymap.c b/keyboards/aeboards/aegis/keymaps/default/keymap.c deleted file mode 100644 index 8437ffeb4ed..00000000000 --- a/keyboards/aeboards/aegis/keymaps/default/keymap.c +++ /dev/null @@ -1,72 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap BASE: (Base Layer) Default Layer - * ,-------------------. ,-------------------------------------------------------------. - * |End |Home|PgDn|PgUp| |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| - * `-------------------' `-------------------------------------------------------------' - * - * |-------------------| ,-------------------------------------------------------------. - * |- | * | / |BSPC| | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|pipe| del| - * |-------------------| |-------------------------------------------------------------| - * | | 9 | 8 | 7 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| BSPC | - * | + |--------------| |-------------------------------------------------------------| - * | | 6 | 5 | 4 | |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-------------------| |-------------------------------------------------------------| - * | | 3 | 2 | 1 | |Up| |Shift| Z| X| C| V| B| N| M| ,| .| /|Shift | FN | - * | ENT|-------------------------------------------------------------------------------| - * | | 0 | left |Dn| rhgt | FN | Alt | Space |Alt |Gui| ctrl| | - * `------------------------------------------------------------------------------------' - */ - [0] = LAYOUT_aegis( - KC_END , KC_HOME, KC_PGDN, KC_PGUP, KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , - KC_PMNS, KC_PAST, KC_PSLS, KC_BSPC, KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSLS, KC_DEL, - KC_PPLS, KC_P9 , KC_P8 , KC_P7 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSPC, - KC_PPLS, KC_P6 , KC_P5 , KC_P4 , KC_LCTL, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , - KC_PENT, KC_P3 , KC_P2 , KC_P1 , KC_UP , KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1), - KC_PENT, KC_PDOT, KC_P0 , KC_LEFT, KC_DOWN, KC_RGHT, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), - - [1] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP , KC_PGDN, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [2] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [3] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) - -}; diff --git a/keyboards/aeboards/aegis/keymaps/default/readme.md b/keyboards/aeboards/aegis/keymaps/default/readme.md deleted file mode 100644 index e6b24245634..00000000000 --- a/keyboards/aeboards/aegis/keymaps/default/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The Default Aegis Layout - diff --git a/keyboards/aeboards/aegis/keymaps/via/keymap.c b/keyboards/aeboards/aegis/keymaps/via/keymap.c deleted file mode 100644 index 8437ffeb4ed..00000000000 --- a/keyboards/aeboards/aegis/keymaps/via/keymap.c +++ /dev/null @@ -1,72 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap BASE: (Base Layer) Default Layer - * ,-------------------. ,-------------------------------------------------------------. - * |End |Home|PgDn|PgUp| |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12| - * `-------------------' `-------------------------------------------------------------' - * - * |-------------------| ,-------------------------------------------------------------. - * |- | * | / |BSPC| | ~ | 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|pipe| del| - * |-------------------| |-------------------------------------------------------------| - * | | 9 | 8 | 7 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| BSPC | - * | + |--------------| |-------------------------------------------------------------| - * | | 6 | 5 | 4 | |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-------------------| |-------------------------------------------------------------| - * | | 3 | 2 | 1 | |Up| |Shift| Z| X| C| V| B| N| M| ,| .| /|Shift | FN | - * | ENT|-------------------------------------------------------------------------------| - * | | 0 | left |Dn| rhgt | FN | Alt | Space |Alt |Gui| ctrl| | - * `------------------------------------------------------------------------------------' - */ - [0] = LAYOUT_aegis( - KC_END , KC_HOME, KC_PGDN, KC_PGUP, KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , - KC_PMNS, KC_PAST, KC_PSLS, KC_BSPC, KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSLS, KC_DEL, - KC_PPLS, KC_P9 , KC_P8 , KC_P7 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSPC, - KC_PPLS, KC_P6 , KC_P5 , KC_P4 , KC_LCTL, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , - KC_PENT, KC_P3 , KC_P2 , KC_P1 , KC_UP , KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1), - KC_PENT, KC_PDOT, KC_P0 , KC_LEFT, KC_DOWN, KC_RGHT, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), - - [1] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_UP , KC_PGDN, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [2] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [3] = LAYOUT_aegis( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) - -}; diff --git a/keyboards/aeboards/aegis/keymaps/via/readme.md b/keyboards/aeboards/aegis/keymaps/via/readme.md deleted file mode 100644 index a80671bd943..00000000000 --- a/keyboards/aeboards/aegis/keymaps/via/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The VIA Aegis Layout - diff --git a/keyboards/aeboards/aegis/keymaps/via/rules.mk b/keyboards/aeboards/aegis/keymaps/via/rules.mk deleted file mode 100644 index f072c67198c..00000000000 --- a/keyboards/aeboards/aegis/keymaps/via/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ -# project specific files -SRC = keyboards/wilba_tech/wt_main.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section -BOOTLOADER = atmel-dfu - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file diff --git a/keyboards/aeboards/aegis/readme.md b/keyboards/aeboards/aegis/readme.md deleted file mode 100644 index 1b8fc124e5b..00000000000 --- a/keyboards/aeboards/aegis/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -AEGIS -=== - -A left handed g80-1800-esque keyboard by [aeboards](https://aeboards.com/) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: AEGIS -Hardware Availability: Custom keyboard group buys - -Make example for this keyboard (after setting up your build environment): - - make aeboards/aegis:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk deleted file mode 100644 index f1c632289cc..00000000000 --- a/keyboards/aeboards/aegis/rules.mk +++ /dev/null @@ -1,65 +0,0 @@ -# project specific files -SRC = keyboards/wilba_tech/wt_main.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section -BOOTLOADER = atmel-dfu - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ai03/README.md b/keyboards/ai03/README.md deleted file mode 100644 index 90bd219289a..00000000000 --- a/keyboards/ai03/README.md +++ /dev/null @@ -1,4 +0,0 @@ -# ai03 -QMK folders for PCB commissions. - -Website: [ai03 Keyboard Designs](https://kb.ai03.me/) \ No newline at end of file diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h deleted file mode 100644 index a9d19255462..00000000000 --- a/keyboards/ai03/lunar/config.h +++ /dev/null @@ -1,266 +0,0 @@ -/* -Copyright 2019 Ryota Goto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA103 -#define PRODUCT_ID 0x0001 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Switchplate Peripherals -#define PRODUCT Lunar -#define DESCRIPTION 65% AEK keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 } -#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 - -/* VIA Configurator Compatibility */ - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -// DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635 -// DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/ai03/lunar/info.json b/keyboards/ai03/lunar/info.json deleted file mode 100644 index e18a10bde0e..00000000000 --- a/keyboards/ai03/lunar/info.json +++ /dev/null @@ -1,84 +0,0 @@ -{ - "keyboard_name": "Lunar", - "url": "https://geekhack.org/index.php?topic=96112.0", - "maintainer": "ai03", - "bootloader": "", - "width": 16, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"!", "x":1, "y":0}, - {"label":"@", "x":2, "y":0}, - {"label":"#", "x":3, "y":0}, - {"label":"$", "x":4, "y":0}, - {"label":"%", "x":5, "y":0}, - {"label":"^", "x":6, "y":0}, - {"label":"&", "x":7, "y":0}, - {"label":"*", "x":8, "y":0}, - {"label":"(", "x":9, "y":0}, - {"label":")", "x":10, "y":0}, - {"label":"_", "x":11, "y":0}, - {"label":"+", "x":12, "y":0}, - {"label":"BackspaceL", "x":13, "y":0}, - {"label":"BackspaceR", "x":14, "y":0}, - {"label":"Insert", "x":15, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"{", "x":11.5, "y":1}, - {"label":"}", "x":12.5, "y":1}, - {"label":"|", "x":13.5, "y":1, "w":1.5}, - {"label":"Delete", "x":15, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":":", "x":10.75, "y":2}, - {"label":"\"", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Home", "x":15, "y":2}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":"<", "x":9.25, "y":3}, - {"label":">", "x":10.25, "y":3}, - {"label":"?", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":1.75}, - {"label":"\u2191", "x":14, "y":3}, - {"label":"End", "x":15, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.5}, - {"label":"Win", "x":1.5, "y":4, "w":1.25}, - {"label":"Alt", "x":2.75, "y":4, "w":1.5}, - {"x":4.25, "y":4, "w":2.25}, - {"x":6.5, "y":4, "w":1.5}, - {"x":8, "y":4, "w":2.75}, - {"label":"Alt", "x":10.75, "y":4, "w":1.25}, - {"label":"Win", "x":12, "y":4}, - {"label":"\u2190", "x":13, "y":4}, - {"label":"\u2193", "x":14, "y":4}, - {"label":"\u2192", "x":15, "y":4} - ] - } - } -} \ No newline at end of file diff --git a/keyboards/ai03/lunar/keymaps/default/keymap.c b/keyboards/ai03/lunar/keymaps/default/keymap.c deleted file mode 100644 index 4705d00ec1d..00000000000 --- a/keyboards/ai03/lunar/keymaps/default/keymap.c +++ /dev/null @@ -1,90 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - MANUAL = SAFE_RANGE, - SWPLURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - - Layout - - K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014 - K100 K101 K102 K103 K104 K105 K106 K107 K108 K109 K110 K111 K112 K113 K114 - K200 K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211 K213 K214 - K300 K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311 K313 K314 - K400 K401 K402 K403 K405 K407 K409 K410 K411 K413 K414 - - K212 = Split backspace (bound to Del by default) - K403, K407 = Split space (bound to space by default) - K405 = Main space - - */ - - [0] = LAYOUT( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_GRV, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT( /* FN */ - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, MANUAL, - KC_CAPS, _______, KC_UP, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_MPRV, KC_MPLY, KC_MNXT, _______, SWPLURL, - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, - _______, KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, KC_PGUP, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END - ) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case MANUAL: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("https://kb.ai03.me/redir/lunar/index.html"); - } else { - // when keycode QMKBEST is released - } - break; - case SWPLURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://switchplate.co/collections/lunar-group-buy"); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ai03/lunar/keymaps/default/readme.md b/keyboards/ai03/lunar/keymaps/default/readme.md deleted file mode 100644 index 8ff536ffc1e..00000000000 --- a/keyboards/ai03/lunar/keymaps/default/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The default keymap for Lunar -For use without VIA configurator. \ No newline at end of file diff --git a/keyboards/ai03/lunar/keymaps/via/keymap.c b/keyboards/ai03/lunar/keymaps/via/keymap.c deleted file mode 100644 index b98e6cf0aa7..00000000000 --- a/keyboards/ai03/lunar/keymaps/via/keymap.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - - Layout - - K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014 - K100 K101 K102 K103 K104 K105 K106 K107 K108 K109 K110 K111 K112 K113 K114 - K200 K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211 K213 K214 - K300 K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311 K313 K314 - K400 K401 K402 K403 K405 K407 K409 K410 K411 K413 K414 - - K212 = Split backspace (bound to Del by default) - K403, K407 = Split space (bound to space by default) - K405 = Main space - - */ - - [0] = LAYOUT( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_GRV, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT( /* FN */ - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, _______, - KC_CAPS, _______, KC_UP, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, - _______, KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, KC_PGUP, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END - ), - [2] = LAYOUT( /* Blank. For VIA compatibility */ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT( /* Blank. For VIA compatibility */ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/ai03/lunar/keymaps/via/readme.md b/keyboards/ai03/lunar/keymaps/via/readme.md deleted file mode 100644 index ff0b73bfcee..00000000000 --- a/keyboards/ai03/lunar/keymaps/via/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The VIA keymap for Lunar -This keymap is for compatibility with the VIA configurator. \ No newline at end of file diff --git a/keyboards/ai03/lunar/keymaps/via/rules.mk b/keyboards/ai03/lunar/keymaps/via/rules.mk deleted file mode 100644 index 7c10c3fbbd1..00000000000 --- a/keyboards/ai03/lunar/keymaps/via/rules.mk +++ /dev/null @@ -1,86 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -SRC += keyboards/wilba_tech/wt_main.c - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file diff --git a/keyboards/ai03/lunar/lunar.c b/keyboards/ai03/lunar/lunar.c deleted file mode 100644 index 37438c71e61..00000000000 --- a/keyboards/ai03/lunar/lunar.c +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "lunar.h" - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/ai03/lunar/lunar.h b/keyboards/ai03/lunar/lunar.h deleted file mode 100644 index 2e66ecb5c56..00000000000 --- a/keyboards/ai03/lunar/lunar.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K402, K403, K405, K407, K409, K410, K411, K413, K414 \ -) \ -{ \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, K402, K403, KC_NO, K405, KC_NO, K407, KC_NO, K409, K410, K411, KC_NO, K413, K414 } \ -} diff --git a/keyboards/ai03/lunar/readme.md b/keyboards/ai03/lunar/readme.md deleted file mode 100644 index 585d6454ba5..00000000000 --- a/keyboards/ai03/lunar/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Lunar - -![Photo](https://i.imgur.com/hYoW8IJ.jpg) - -A 65% keyboard made specifically for Alps SKCM/L switches and AEK/M0116 keycaps. - -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) -Hardware Supported: Official Lunar PCB -Hardware Availability: [Switchplate Peripherals](https://switchplate.co/) - -Make example for this keyboard (after setting up your build environment): - - make ai03/lunar:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk deleted file mode 100644 index 8c2532574a9..00000000000 --- a/keyboards/ai03/lunar/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h deleted file mode 100644 index 00945ac7969..00000000000 --- a/keyboards/ai03/orbit/config.h +++ /dev/null @@ -1,249 +0,0 @@ -/* -Copyright 2018 Ryota Goto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA103 -#define PRODUCT_ID 0x0003 -#define DEVICE_VER 0x0003 -#define MANUFACTURER ai03 Keyboard Designs -#define PRODUCT Orbit -#define DESCRIPTION Split ergonomic keyboard - -/* key matrix size */ -#define MATRIX_ROWS 10 // Double rows for split keyboards. Orbit has 5, so define 10 -#define MATRIX_COLS 7 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 } -#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 } -#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 } -#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 } - -#define SPLIT_HAND_PIN D5 - -//#define USE_I2C - -#define SELECT_SOFT_SERIAL_SPEED 1 - -#define UNUSED_PINS - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -#define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ai03/orbit/info.json b/keyboards/ai03/orbit/info.json deleted file mode 100644 index ca838811301..00000000000 --- a/keyboards/ai03/orbit/info.json +++ /dev/null @@ -1,88 +0,0 @@ -{ - "keyboard_name": "orbit", - "url": "https://github.com/ai03-2725/Orbit", - "maintainer": "ai03", - "width": 16, - "height": 6, - "layouts": { - "LAYOUT": { - "layout": [ - {"x":0, "y":0.63}, - {"x":1, "y":0.38}, - {"x":2, "y":0.38}, - {"x":3, "y":0.13}, - {"x":4, "y":0}, - {"x":5, "y":0.13}, - {"x":6, "y":0.25}, - {"x":9, "y":0.25}, - {"x":10, "y":0.13}, - {"x":11, "y":0}, - {"x":12, "y":0.13}, - {"x":13, "y":0.38}, - {"x":14, "y":0.38}, - {"x":15, "y":0.63}, - - {"x":0, "y":1.63}, - {"x":1, "y":1.38}, - {"x":2, "y":1.38}, - {"x":3, "y":1.13}, - {"x":4, "y":1}, - {"x":5, "y":1.13}, - {"x":6, "y":1.25}, - {"x":9, "y":1.25}, - {"x":10, "y":1.13}, - {"x":11, "y":1}, - {"x":12, "y":1.13}, - {"x":13, "y":1.38}, - {"x":14, "y":1.38}, - {"x":15, "y":1.63}, - - {"x":0, "y":2.63}, - {"x":1, "y":2.38}, - {"x":2, "y":2.38}, - {"x":3, "y":2.13}, - {"x":4, "y":2}, - {"x":5, "y":2.13}, - {"x":6, "y":2.25}, - {"x":9, "y":2.25}, - {"x":10, "y":2.13}, - {"x":11, "y":2}, - {"x":12, "y":2.13}, - {"x":13, "y":2.38}, - {"x":14, "y":2.38}, - {"x":15, "y":2.63}, - - {"x":0, "y":3.63}, - {"x":1, "y":3.38}, - {"x":2, "y":3.38}, - {"x":3, "y":3.13}, - {"x":4, "y":3}, - {"x":5, "y":3.13}, - {"x":6, "y":3.25}, - {"x":9, "y":3.25}, - {"x":10, "y":3.13}, - {"x":11, "y":3}, - {"x":12, "y":3.13}, - {"x":13, "y":3.38}, - {"x":14, "y":3.38}, - {"x":15, "y":3.63}, - - {"x":1, "y":4.38}, - {"x":2, "y":4.38}, - {"x":3, "y":4.13}, - {"x":4, "y":4}, - - {"x":5.5, "y":4.25}, - {"x":6.5, "y":4.5, "h":1.5}, - - {"x":8.5, "y":4.5, "h":1.5}, - {"x":9.5, "y":4.25}, - - {"x":11, "y":4}, - {"x":12, "y":4.13}, - {"x":13, "y":4.38}, - {"x":14, "y":4.38} - ] - } - } -} \ No newline at end of file diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c deleted file mode 100644 index 4c8c39fb0f2..00000000000 --- a/keyboards/ai03/orbit/keymaps/default/keymap.c +++ /dev/null @@ -1,91 +0,0 @@ -/* Copyright 2018 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - MANUAL = SAFE_RANGE, - DBLZERO -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - TO(1), KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_BSPC, \ - TO(1), KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC, KC_BSLS, \ - KC_NO, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_NO, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_PSCR, KC_DEL, \ - KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_GRV, KC_MENU, KC_MINS, KC_EQL - ), - [1] = LAYOUT( /* Fn, Arrowkeys, Media control, Backlight */ - TO(2), _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU, _______, \ - TO(2), _______, _______, KC_PGUP, _______, _______, KC_F11, KC_F12, _______, KC_UP, _______, _______, KC_VOLD, BL_STEP, \ - TO(0), _______, KC_HOME, KC_PGDN, KC_END, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MPLY, _______, \ - TO(0), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [2] = LAYOUT( /* Mousekeys and Numpad */ - KC_NO, _______, _______, _______, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_PSLS, _______, _______, \ - KC_NO, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, KC_P4, KC_P5, KC_P6, KC_PAST, _______, _______, \ - TO(1), _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______, _______, \ - TO(1), _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_BTN3, _______, DBLZERO, KC_P0, KC_PDOT, KC_PENT, KC_PPLS, _______, MANUAL, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case MANUAL: - if (record->event.pressed) - { - // Keypress - SEND_STRING("https://kb.ai03.me/redir/orbit"); - } - else - { - // Key release - } - break; - case DBLZERO: - if (record->event.pressed) - { - // Keypress - SEND_STRING("00"); - } - else - { - // Key release - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} - -uint32_t layer_state_set_user(uint32_t state) { - - return state; -} diff --git a/keyboards/ai03/orbit/keymaps/default/readme.md b/keyboards/ai03/orbit/keymaps/default/readme.md deleted file mode 100644 index 63c528abfa5..00000000000 --- a/keyboards/ai03/orbit/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The default keymap for Orbit - -[KLE of layout](http://www.keyboard-layout-editor.com/#/gists/53ebf59524de12515cb7e2e6de94f0d6) \ No newline at end of file diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c deleted file mode 100644 index a1509666cd5..00000000000 --- a/keyboards/ai03/orbit/matrix.c +++ /dev/null @@ -1,328 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include "wait.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "split_flags.h" -#include "quantum.h" -#include "debounce.h" -#include "transport.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -//#define ROWS_PER_HAND (MATRIX_ROWS / 2) - -#ifdef DIRECT_PINS -static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; -#else -static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t raw_matrix[ROWS_PER_HAND]; - -// row offsets for each hand -uint8_t thisHand, thatHand; - -// user-defined overridable functions - -__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } - -__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } - -__attribute__((weak)) void matrix_init_user(void) {} - -__attribute__((weak)) void matrix_scan_user(void) {} - -__attribute__((weak)) void matrix_slave_scan_user(void) {} - -// helper functions - -inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } - -inline uint8_t matrix_cols(void) { return MATRIX_COLS; } - -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - -inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } - -inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } - -void matrix_print(void) { - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); - print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) { - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; -} - -// matrix code - -#ifdef DIRECT_PINS - -static void init_pins(void) { - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - pin_t pin = direct_pins[row][col]; - if (pin != NO_PIN) { - setPinInputHigh(pin); - } - } - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t last_row_value = current_matrix[current_row]; - current_matrix[current_row] = 0; - - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - pin_t pin = direct_pins[current_row][col_index]; - if (pin != NO_PIN) { - current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); - } - } - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == COL2ROW) - -static void select_row(uint8_t row) { - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } - -static void unselect_rows(void) { - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void select_col(uint8_t col) { - setPinOutput(col_pins[col]); - writePinLow(col_pins[col]); -} - -static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); } - -static void unselect_cols(void) { - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static void init_pins(void) { - unselect_cols(); - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if (readPin(row_pins[row_index])) { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } else { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -#endif - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - - // Set pinout for right half if pinout for that half is defined - if (!isLeftHand) { -#ifdef MATRIX_ROW_PINS_RIGHT - const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - row_pins[i] = row_pins_right[i]; - } -#endif -#ifdef MATRIX_COL_PINS_RIGHT - const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_COLS; i++) { - col_pins[i] = col_pins_right[i]; - } -#endif - } - - thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); - thatHand = ROWS_PER_HAND - thisHand; - - // initialize key pins - init_pins(); - - // initialize matrix state: all keys off - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } - - debounce_init(ROWS_PER_HAND); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - bool changed = false; - -#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); - } -#endif - - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - - return 1; -} - -uint8_t matrix_scan(void) { - uint8_t ret = _matrix_scan(); - - if (is_keyboard_master()) { - static uint8_t error_count; - - if (!transport_master(matrix + thatHand)) { - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; - } - } - } else { - error_count = 0; - } - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thisHand); - matrix_slave_scan_user(); - } - - return ret; -} diff --git a/keyboards/ai03/orbit/matrix.h b/keyboards/ai03/orbit/matrix.h deleted file mode 100644 index c2bdd3098c1..00000000000 --- a/keyboards/ai03/orbit/matrix.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#include diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c deleted file mode 100644 index 2f149875b1c..00000000000 --- a/keyboards/ai03/orbit/orbit.c +++ /dev/null @@ -1,228 +0,0 @@ -/* Copyright 2018 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "orbit.h" -#include "split_util.h" -#include "transport.h" - - -// Call led_toggle to set LEDs easily -// LED IDs: -// -// (LEFT) 0 1 2 | 3 4 5 (RIGHT) - -void led_toggle(int id, bool on) { - - if (isLeftHand) { - switch(id) { - case 0: - // Left hand C6 - if (on) - //PORTC |= (1<<6); - writePinHigh(C6); - else - //PORTC &= ~(1<<6); - writePinLow(C6); - break; - case 1: - // Left hand B6 - if (on) - //PORTB |= (1<<6); - writePinHigh(B6); - else - //PORTB &= ~(1<<6); - writePinLow(B6); - break; - case 2: - // Left hand B5 - if (on) - //PORTB |= (1<<5); - writePinHigh(B5); - else - //PORTB &= ~(1<<5); - writePinLow(B5); - break; - default: - break; - } - } else { - switch(id) { - case 3: - // Right hand F6 - if (on) - //PORTF |= (1<<6); - writePinHigh(F6); - else - //PORTF &= ~(1<<6); - writePinLow(F6); - break; - case 4: - // Right hand F7 - if (on) - //PORTF |= (1<<7); - writePinHigh(F7); - else - //PORTF &= ~(1<<7); - writePinLow(F7); - break; - case 5: - // Right hand C7 - if (on) - //PORTC |= (1<<7); - writePinHigh(C7); - else - //PORTC &= ~(1<<7); - writePinLow(C7); - break; - default: - break; - } - } -} - -// Set all LEDs at once using an array of 6 booleans -// LED IDs: -// -// (LEFT) 0 1 2 | 3 4 5 (RIGHT) -// -// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand - -void set_all_leds(bool leds[6]) { - for (int i = 0; i < 6; i++) { - led_toggle(i, leds[i]); - } -} - -void set_layer_indicators(uint8_t layer) { - - switch (layer) - { - case 0: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, false); - break; - case 1: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, false); - break; - case 2: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, true); - break; - case 3: - led_toggle(0, false); - led_toggle(1, true); - led_toggle(2, true); - break; - case 4: - led_toggle(0, false); - led_toggle(1, false); - led_toggle(2, true); - break; - default: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, true); - break; - } - -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - // Initialize indicator LEDs to output - if (isLeftHand) - { - setPinOutput(C6); - setPinOutput(B6); - setPinOutput(B5); - //DDRC |= (1<<6); - //DDRB |= (1<<6); - //DDRB |= (1<<5); - } - else - { - setPinOutput(F6); - setPinOutput(F7); - setPinOutput(C7); - //DDRF |= (1<<6); - //DDRF |= (1<<7); - //DDRC |= (1<<7); - } - - set_layer_indicators(0); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (is_keyboard_master()) { - - serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK); - serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); - serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK); - - led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK)); - led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)); - led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)); - - } - - led_set_user(usb_led); -} - -uint32_t layer_state_set_kb(uint32_t state) { - - if (is_keyboard_master()) - { - - current_layer = biton32(state); - serial_m2s_buffer.current_layer = biton32(state); - - // If left half, do the LED toggle thing - if (isLeftHand) - { - set_layer_indicators(biton32(state)); - } - - } - // NOTE: Do not set slave LEDs here. - // This is not called on slave - - return layer_state_set_user(state); -} - - diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h deleted file mode 100644 index 211b9ebca9e..00000000000 --- a/keyboards/ai03/orbit/orbit.h +++ /dev/null @@ -1,65 +0,0 @@ -/* Copyright 2018 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef ORBIT_H -#define ORBIT_H - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - - -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ - L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ - L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ - L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45 \ -) \ -{ \ - { L00, L01, L02, L03, L04, L05, L06 }, \ - { L10, L11, L12, L13, L14, L15, L16 }, \ - { L20, L21, L22, L23, L24, L25, L26 }, \ - { L30, L31, L32, L33, L34, L35, L36 }, \ - { KC_NO, L41, L42, L43, L44, L45, L46 }, \ - { R00, R01, R02, R03, R04, R05, R06 }, \ - { R10, R11, R12, R13, R14, R15, R16 }, \ - { R20, R21, R22, R23, R24, R25, R26 }, \ - { R30, R31, R32, R33, R34, R35, R36 }, \ - { R40, R41, R42, R43, R44, R45, KC_NO } \ -} - -uint8_t current_layer; - -extern void led_toggle(int id, bool on); -void set_all_leds(bool leds[6]); -extern void set_layer_indicators(uint8_t layer); - -#endif diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md deleted file mode 100644 index 58ba2079d5d..00000000000 --- a/keyboards/ai03/orbit/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Orbit - -![Orbit](https://raw.githubusercontent.com/ai03-2725/Orbit/master/Images/PCB-R2.0.jpg) - -A split ergonomic keyboard project. - -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) -Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) -Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. - -Make example for this keyboard (after setting up your build environment): - - make ai03/orbit:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk deleted file mode 100644 index 4b40e47cb7e..00000000000 --- a/keyboards/ai03/orbit/rules.mk +++ /dev/null @@ -1,92 +0,0 @@ -SRC += split_util.c \ - split_flags.c \ - serial.c \ - transport.c \ - matrix.c - -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -USE_I2C = no # I2C for split communication -CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) -# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files - - diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c deleted file mode 100644 index 1315377a345..00000000000 --- a/keyboards/ai03/orbit/serial.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include -#include "serial.h" -//#include - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_AVR_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps (Experimental only) -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) -// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h deleted file mode 100644 index 1c1e640069c..00000000000 --- a/keyboards/ai03/orbit/serial.h +++ /dev/null @@ -1,62 +0,0 @@ -#pragma once - -#include - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE simple API (using signle-type transaction function) -// /* nothing */ -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c deleted file mode 100644 index 1f5825d6502..00000000000 --- a/keyboards/ai03/orbit/split_flags.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "split_flags.h" - -volatile bool RGB_DIRTY = false; - -volatile bool BACKLIT_DIRTY = false; \ No newline at end of file diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h deleted file mode 100644 index aaac474a7db..00000000000 --- a/keyboards/ai03/orbit/split_flags.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include -#include - -/** -* Global Flags -**/ - -//RGB Stuff -extern volatile bool RGB_DIRTY; - - -//Backlight Stuff -extern volatile bool BACKLIT_DIRTY; diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c deleted file mode 100644 index 5095cb8fdce..00000000000 --- a/keyboards/ai03/orbit/split_util.c +++ /dev/null @@ -1,87 +0,0 @@ -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" -#include "split_flags.h" -#include "transport.h" -#include "quantum.h" - -#ifdef EE_HANDS -# include "tmk_core/common/eeprom.h" -# include "eeconfig.h" -#endif - -volatile bool isLeftHand = true; - -__attribute__((weak)) -bool is_keyboard_left(void) { - #ifdef SPLIT_HAND_PIN - // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand - setPinInput(SPLIT_HAND_PIN); - return readPin(SPLIT_HAND_PIN); - #else - #ifdef EE_HANDS - return eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - #ifdef MASTER_RIGHT - return !is_keyboard_master(); - #else - return is_keyboard_master(); - #endif - #endif - #endif -} - -bool is_keyboard_master(void) -{ -#ifdef __AVR__ - static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN; - - // only check once, as this is called often - if (usbstate == UNKNOWN) - { - USBCON |= (1 << OTGPADE); // enables VBUS pad - wait_us(5); - - usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS - } - - return (usbstate == MASTER); -#else - return true; -#endif -} - -static void keyboard_master_setup(void) { -#if defined(USE_I2C) || defined(EH) - #ifdef SSD1306OLED - matrix_master_OLED_init (); - #endif -#endif - transport_master_init(); - - // For master the Backlight info needs to be sent on startup - // Otherwise the salve won't start with the proper info until an update - BACKLIT_DIRTY = true; -} - -static void keyboard_slave_setup(void) -{ - transport_slave_init(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) -{ - isLeftHand = is_keyboard_left(); - - if (is_keyboard_master()) - { - keyboard_master_setup(); - } - else - { - keyboard_slave_setup(); - } -} diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h deleted file mode 100644 index 20f7535bf44..00000000000 --- a/keyboards/ai03/orbit/split_util.h +++ /dev/null @@ -1,10 +0,0 @@ -#pragma once - -#include -#include -#include -#include - -extern volatile bool isLeftHand; - -void matrix_master_OLED_init (void); diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c deleted file mode 100644 index adedf243220..00000000000 --- a/keyboards/ai03/orbit/transport.c +++ /dev/null @@ -1,238 +0,0 @@ - -#include "transport.h" - -#include "config.h" -#include "matrix.h" -#include "quantum.h" - -#include "orbit.h" - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -#ifdef RGBLIGHT_ENABLE -# include "rgblight.h" -#endif - -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" - extern backlight_config_t backlight_config; -#endif - -#if defined(USE_I2C) || defined(EH) - -#include "i2c.h" - -#ifndef SLAVE_I2C_ADDRESS -# define SLAVE_I2C_ADDRESS 0x32 -#endif - -#if (MATRIX_COLS > 8) -# error "Currently only supports 8 COLS" -#endif - -// Get rows from other half over i2c -bool transport_master(matrix_row_t matrix[]) { - int err = 0; - - // write backlight info -#ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // Backlight location - err = i2c_master_write(I2C_BACKLIT_START); - if (err) { goto i2c_error; } - - // Write backlight - i2c_master_write(get_backlight_level()); - - BACKLIT_DIRTY = false; - } -#endif - - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // start of matrix stored at I2C_KEYMAP_START - err = i2c_master_write(I2C_KEYMAP_START); - if (err) { goto i2c_error; } - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) { goto i2c_error; } - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[i] = i2c_master_read(I2C_ACK); - } - matrix[i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return false; - } - -#ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // RGB Location - err = i2c_master_write(I2C_RGB_START); - if (err) { goto i2c_error; } - - uint32_t dword = eeconfig_read_rgblight(); - - // Write RGB - err = i2c_master_write_data(&dword, 4); - if (err) { goto i2c_error; } - - RGB_DIRTY = false; - i2c_master_stop(); - } -#endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i]; - } - // Read Backlight Info - #ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) - { - backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]); - BACKLIT_DIRTY = false; - } - #endif - #ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) - { - // Disable interupts (RGB data is big) - cli(); - // Create new DWORD for RGB data - uint32_t dword; - - // Fill the new DWORD with the data that was sent over - uint8_t * dword_dat = (uint8_t *)(&dword); - for (int i = 0; i < 4; i++) - { - dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i]; - } - - // Update the RGB now with the new data and set RGB_DIRTY to false - rgblight_update_dword(dword); - RGB_DIRTY = false; - // Re-enable interupts now that RGB is set - sei(); - } - #endif -} - -void transport_master_init(void) { - i2c_master_init(); -} - -void transport_slave_init(void) { - i2c_slave_init(SLAVE_I2C_ADDRESS); -} - -#else // USE_SERIAL - -#include "serial.h" - - - -volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; -volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; -uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, - sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer - } -}; - -uint8_t slave_layer_cache; -uint8_t slave_nlock_cache; -uint8_t slave_clock_cache; -uint8_t slave_slock_cache; - -void transport_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void transport_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); - slave_layer_cache = 255; - slave_nlock_cache = 255; - slave_clock_cache = 255; - slave_slock_cache = 255; -} - -bool transport_master(matrix_row_t matrix[]) { - - if (soft_serial_transaction()) { - return false; - } - - // TODO: if MATRIX_COLS > 8 change to unpack() - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[i] = serial_s2m_buffer.smatrix[i]; - } - - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Code to send RGB over serial goes here (not implemented yet) - #endif - - #ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; - #endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - // TODO: if MATRIX_COLS > 8 change to pack() - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - serial_s2m_buffer.smatrix[i] = matrix[i]; - } - #ifdef BACKLIGHT_ENABLE - backlight_set(serial_m2s_buffer.backlight_level); - #endif - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Add serial implementation for RGB here - #endif - - if (slave_layer_cache != serial_m2s_buffer.current_layer) { - slave_layer_cache = serial_m2s_buffer.current_layer; - set_layer_indicators(slave_layer_cache); - } - - if (slave_nlock_cache != serial_m2s_buffer.nlock_led) { - slave_nlock_cache = serial_m2s_buffer.nlock_led; - led_toggle(3, slave_nlock_cache); - } - if (slave_clock_cache != serial_m2s_buffer.clock_led) { - slave_clock_cache = serial_m2s_buffer.clock_led; - led_toggle(4, slave_clock_cache); - } - if (slave_slock_cache != serial_m2s_buffer.slock_led) { - slave_slock_cache = serial_m2s_buffer.slock_led; - led_toggle(5, slave_slock_cache); - } - -} - -#endif diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h deleted file mode 100644 index 422e2ecb990..00000000000 --- a/keyboards/ai03/orbit/transport.h +++ /dev/null @@ -1,42 +0,0 @@ -#pragma once - -#include - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -typedef struct _Serial_s2m_buffer_t { - // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack - matrix_row_t smatrix[ROWS_PER_HAND]; -} Serial_s2m_buffer_t; - -typedef struct _Serial_m2s_buffer_t { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - rgblight_config_t rgblight_config; //not yet use - // - // When MCUs on both sides drive their respective RGB LED chains, - // it is necessary to synchronize, so it is necessary to communicate RGB information. - // In that case, define the RGBLIGHT_SPLIT macro. - // - // Otherwise, if the master side MCU drives both sides RGB LED chains, - // there is no need to communicate. -#endif - - uint8_t current_layer; - uint8_t nlock_led; - uint8_t clock_led; - uint8_t slock_led; - -} Serial_m2s_buffer_t; - -extern volatile Serial_s2m_buffer_t serial_s2m_buffer; -extern volatile Serial_m2s_buffer_t serial_m2s_buffer; - -void transport_master_init(void); -void transport_slave_init(void); - -// returns false if valid data not received from slave -bool transport_master(matrix_row_t matrix[]); -void transport_slave(matrix_row_t matrix[]); diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h deleted file mode 100644 index 299e5999d60..00000000000 --- a/keyboards/ai03/soyuz/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 Ryota Goto - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA103 -#define PRODUCT_ID 0x0004 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ai03 Design Studio -#define PRODUCT Soyuz -#define DESCRIPTION Single-PCB Numpad Kit - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D4, C6, B6, E6, B4 } -#define MATRIX_COL_PINS { F4, B3, D7, B5 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ai03/soyuz/info.json b/keyboards/ai03/soyuz/info.json deleted file mode 100644 index e4f8eb0aa4a..00000000000 --- a/keyboards/ai03/soyuz/info.json +++ /dev/null @@ -1,33 +0,0 @@ -{ - "keyboard_name": "Soyuz", - "url": "https://github.com/ai03-2725/soyuz", - "maintainer": "ai03", - "width": 4, - "height": 5, - "layouts": { - "LAYOUT_ortho_5x4": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3}, - {"x":0, "y":4}, - {"x":1, "y":4}, - {"x":2, "y":4}, - {"x":3, "y":4} - ] - } - } -} diff --git a/keyboards/ai03/soyuz/keymaps/1U/keymap.c b/keyboards/ai03/soyuz/keymaps/1U/keymap.c deleted file mode 100644 index aa8683c8a44..00000000000 --- a/keyboards/ai03/soyuz/keymaps/1U/keymap.c +++ /dev/null @@ -1,57 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - DBLZERO = SAFE_RANGE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_5x4( /* Base */ - KC_NLCK, KC_PSLS, KC_PAST, KC_BSPC, \ - KC_P7, KC_P8, KC_P9, KC_MINS, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, KC_EQL, \ - DBLZERO, KC_P0, KC_PDOT, KC_PENT \ - ) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case DBLZERO: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("00"); - } else { - // when keycode QMKBEST is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ai03/soyuz/keymaps/1U/readme.md b/keyboards/ai03/soyuz/keymaps/1U/readme.md deleted file mode 100644 index f030f8c68dd..00000000000 --- a/keyboards/ai03/soyuz/keymaps/1U/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The 1U keymap for Soyuz - -A keymap that uses 1U keys everywhere for a 20-key numpad. \ No newline at end of file diff --git a/keyboards/ai03/soyuz/keymaps/default/keymap.c b/keyboards/ai03/soyuz/keymaps/default/keymap.c deleted file mode 100644 index 62bb5c228a7..00000000000 --- a/keyboards/ai03/soyuz/keymaps/default/keymap.c +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_5x4( /* Base */ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_P0, KC_PDOT, KC_PENT \ - ) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ai03/soyuz/keymaps/default/readme.md b/keyboards/ai03/soyuz/keymaps/default/readme.md deleted file mode 100644 index f4954e8b33b..00000000000 --- a/keyboards/ai03/soyuz/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The default keymap for Soyuz - -A very basic keymap for a "typical" numpad layout using 2U keys wherever applicable. \ No newline at end of file diff --git a/keyboards/ai03/soyuz/readme.md b/keyboards/ai03/soyuz/readme.md deleted file mode 100644 index e88dfab43ed..00000000000 --- a/keyboards/ai03/soyuz/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Soyuz - -![soyuz](https://raw.githubusercontent.com/ai03-2725/Soyuz/master/Renders/Front.png) - -A single-PCB numpad kit - -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) -Hardware Supported: [Soyuz PCB](https://github.com/ai03-2725/soyuz) -Hardware Availability: Various vendors - List will be maintained in the [PCB repo](https://github.com/ai03-2725/soyuz) - -Make example for this keyboard (after setting up your build environment): - - make ai03/soyuz:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk deleted file mode 100644 index 5df789e5818..00000000000 --- a/keyboards/ai03/soyuz/rules.mk +++ /dev/null @@ -1,82 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_5x4 diff --git a/keyboards/ai03/soyuz/soyuz.c b/keyboards/ai03/soyuz/soyuz.c deleted file mode 100644 index dc73f196ef5..00000000000 --- a/keyboards/ai03/soyuz/soyuz.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "soyuz.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/ai03/soyuz/soyuz.h b/keyboards/ai03/soyuz/soyuz.h deleted file mode 100644 index a379f8ede66..00000000000 --- a/keyboards/ai03/soyuz/soyuz.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2019 Ryota Goto - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ - -#define LAYOUT_ortho_5x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33, \ - K40, K41, K42, K43 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 }, \ - { K40, K41, K42, K43 } \ -} diff --git a/keyboards/akb/eb46/config.h b/keyboards/akb/eb46/config.h deleted file mode 100644 index 965f769ccfc..00000000000 --- a/keyboards/akb/eb46/config.h +++ /dev/null @@ -1,52 +0,0 @@ -/* -Copyright 2019 Elliot Powell - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4646 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Elliot Powell -#define PRODUCT eb46 -#define DESCRIPTION eb46 running qmk -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS \ - { B5, B4, D7, B6 } -#define MATRIX_COL_PINS \ - { B0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, C6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 diff --git a/keyboards/akb/eb46/eb46.c b/keyboards/akb/eb46/eb46.c deleted file mode 100644 index 3417b4329a3..00000000000 --- a/keyboards/akb/eb46/eb46.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 Elliot Powell - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "eb46.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/akb/eb46/eb46.h b/keyboards/akb/eb46/eb46.h deleted file mode 100644 index 8dd5290b8db..00000000000 --- a/keyboards/akb/eb46/eb46.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2019 Elliot Powell - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define xxx KC_NO - -#define LAYOUT(\ - k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b,\ - k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, \ - k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, \ - k300, k30, k31, k32, k33, k36, k38, k39, k3a \ -) \ -{ \ - {k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b},\ - {k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, xxx},\ - {k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, xxx},\ - {k300, k30, k31, k32, k33, xxx, xxx, k36, xxx, k38, k39, k3a, xxx} \ -} diff --git a/keyboards/akb/eb46/info.json b/keyboards/akb/eb46/info.json deleted file mode 100644 index 5513df39714..00000000000 --- a/keyboards/akb/eb46/info.json +++ /dev/null @@ -1,58 +0,0 @@ -{ - "keyboard_name": "eb46", - "maintainer": "e11i0t23", - "width": 13.25, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [ - { "label": "F1", "x": 0, "y": 0 }, - { "label": "Esc", "x": 1.25, "y": 0 }, - { "label": "Q", "x": 2.25, "y": 0 }, - { "label": "W", "x": 3.25, "y": 0 }, - { "label": "E", "x": 4.25, "y": 0 }, - { "label": "R", "x": 5.25, "y": 0 }, - { "label": "T", "x": 6.25, "y": 0 }, - { "label": "Y", "x": 7.25, "y": 0 }, - { "label": "U", "x": 8.25, "y": 0 }, - { "label": "I", "x": 9.25, "y": 0 }, - { "label": "O", "x": 10.25, "y": 0 }, - { "label": "P", "x": 11.25, "y": 0 }, - { "label": "BackSpace", "x": 12.25, "y": 0 }, - { "label": "F2", "x": 0, "y": 1 }, - { "label": "Tab", "x": 1.25, "y": 1, "w": 1.25 }, - { "label": "A", "x": 2.5, "y": 1 }, - { "label": "S", "x": 3.5, "y": 1 }, - { "label": "D", "x": 4.5, "y": 1 }, - { "label": "F", "x": 5.5, "y": 1 }, - { "label": "G", "x": 6.5, "y": 1 }, - { "label": "H", "x": 7.5, "y": 1 }, - { "label": "J", "x": 8.5, "y": 1 }, - { "label": "K", "x": 9.5, "y": 1 }, - { "label": "L", "x": 10.5, "y": 1 }, - { "label": "Enter", "x": 11.5, "y": 1, "w": 1.75 }, - { "label": "F3", "x": 0, "y": 2 }, - { "label": "Shift", "x": 1.25, "y": 2, "w": 1.75 }, - { "label": "Z", "x": 3, "y": 2 }, - { "label": "X", "x": 4, "y": 2 }, - { "label": "C", "x": 5, "y": 2 }, - { "label": "V", "x": 6, "y": 2 }, - { "label": "B", "x": 7, "y": 2 }, - { "label": "N", "x": 8, "y": 2 }, - { "label": "M", "x": 9, "y": 2 }, - { "label": "<", "x": 10, "y": 2 }, - { "label": ">", "x": 11, "y": 2 }, - { "label": "RShift", "x": 12, "y": 2, "w": 1.25 }, - { "label": "F4", "x": 0, "y": 3 }, - { "label": "Ctrl", "x": 1.25, "y": 3, "w": 1.25 }, - { "label": "Win", "x": 2.5, "y": 3 }, - { "label": "Alt", "x": 3.5, "y": 3, "w": 1.25 }, - { "label": "FN0", "x": 4.75, "y": 3, "w": 2.25 }, - { "label": "Space", "x": 7, "y": 3, "w": 2.75 }, - { "label": "Menu", "x": 9.75, "y": 3 }, - { "label": "RAlt", "x": 10.75, "y": 3, "w": 1.25 }, - { "label": "Super", "x": 12.25, "y": 3 } - ] - } - } -} diff --git a/keyboards/akb/eb46/keymaps/default/keymap.c b/keyboards/akb/eb46/keymaps/default/keymap.c deleted file mode 100644 index c2114cc65d4..00000000000 --- a/keyboards/akb/eb46/keymaps/default/keymap.c +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2019 Elliot Powell - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_F5, KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_PGUP, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, - KC_PGDN, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, - KC_ESC, LCTL_T(KC_LBRC), KC_LGUI, KC_LALT, KC_SPC, LT(1, KC_SPC), KC_RALT, MO(2), RCTL_T(KC_RBRC) ), - [1] = LAYOUT( /* Base */ - _______, _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0, _______, - _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT, _______, - _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( /* Base */ - _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , - _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_NUHS, _______, - _______, _______, KC_NUBS, _______, _______, _______, _______, _______, _______, KC_SLSH, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, RESET ), -}; diff --git a/keyboards/akb/eb46/readme.md b/keyboards/akb/eb46/readme.md deleted file mode 100644 index e7d10462236..00000000000 --- a/keyboards/akb/eb46/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# eb46 - -EB46: A 40% plus macro keys - -Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23 on reddit](https://reddit.com/u/e11i0t23) -Hardware Supported: EB46 PCB -Hardware Availability: Coming Soon - -Make example for this keyboard (after setting up your build environment): - - make akb/eb46:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk deleted file mode 100644 index 195c9e50236..00000000000 --- a/keyboards/akb/eb46/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/akb/raine/config.h b/keyboards/akb/raine/config.h deleted file mode 100644 index a28fceef2a5..00000000000 --- a/keyboards/akb/raine/config.h +++ /dev/null @@ -1,52 +0,0 @@ -/* -Copyright 2019 Elliot Powell - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER AKB -#define PRODUCT Raine M3 -#define DESCRIPTION Raine M3 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { E6, C6, F7, B2, B0 } -#define MATRIX_COL_PINS \ - { F6, F5, F4, B1, F1, F0, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/akb/raine/info.json b/keyboards/akb/raine/info.json deleted file mode 100644 index 0992f86d060..00000000000 --- a/keyboards/akb/raine/info.json +++ /dev/null @@ -1,84 +0,0 @@ -{ - "keyboard_name": "raine", - "maintainer": "e11i0t23", - "width": 16.25, - "height": 5.25, - "layouts": { - "LAYOUT": { - "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "BSP", "x": 12, "y": 0 }, - { "label": "Num Lock", "x": 13.25, "y": 0 }, - { "label": "Scroll Lock", "x": 14.25, "y": 0 }, - { "label": "Insert", "x": 15.25, "y": 0 }, - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "|", "x": 11.5, "y": 1, "w": 1.5 }, - { "label": "7", "x": 13.25, "y": 1 }, - { "label": "8", "x": 14.25, "y": 1 }, - { "label": "9", "x": 15.25, "y": 1 }, - { "label": "Caps", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": "~", "x": 10.75, "y": 2 }, - { "label": "ENTER", "x": 11.75, "y": 2, "w": 1.25 }, - { "label": "4", "x": 13.25, "y": 2 }, - { "label": "5", "x": 14.25, "y": 2 }, - { "label": "6", "x": 15.25, "y": 2 }, - { "label": "Shift", "x": 0, "y": 3, "w": 1.25 }, - { "label": "|", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "?", "x": 9.25, "y": 3 }, - { "label": "Shift", "x": 10.25, "y": 3, "w": 1.5 }, - { "x": 12, "y": 3.25 }, - { "label": "1", "x": 13.25, "y": 3 }, - { "label": "2", "x": 14.25, "y": 3 }, - { "label": "3", "x": 15.25, "y": 3 }, - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.25, "y": 4, "w": 1.25 }, - { "label": "SPLEFT", "x": 3.5, "y": 4, "w": 2.25 }, - { "label": "7U", "x": 5.75, "y": 4 }, - { "label": "SPRIGHT", "x": 6.75, "y": 4, "w": 1.75 }, - { "label": "Menu", "x": 9.5, "y": 4, "w": 1.25 }, - { "x": 11, "y": 4.25 }, - { "x": 12, "y": 4.25 }, - { "x": 13, "y": 4.25 }, - { "label": "0", "x": 14.25, "y": 4 }, - { "label": "Del", "x": 15.25, "y": 4 } - ] - } - } -} diff --git a/keyboards/akb/raine/keymaps/default/keymap.c b/keyboards/akb/raine/keymaps/default/keymap.c deleted file mode 100644 index 80e52528b47..00000000000 --- a/keyboards/akb/raine/keymaps/default/keymap.c +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2019 Elliot Powell - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_NLCK, KC_SLCK, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_P7, KC_P8, KC_P9, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_HASH, KC_ENT, KC_P4, KC_P5, KC_P6, - KC_LSFT, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_DEL), - [1] = LAYOUT( /* Second */ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), -}; - diff --git a/keyboards/akb/raine/raine.c b/keyboards/akb/raine/raine.c deleted file mode 100644 index d73db4409bb..00000000000 --- a/keyboards/akb/raine/raine.c +++ /dev/null @@ -1,18 +0,0 @@ -/* -Copyright 2019 Elliot Powell - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "raine.h" diff --git a/keyboards/akb/raine/raine.h b/keyboards/akb/raine/raine.h deleted file mode 100644 index fb5cd48cbe5..00000000000 --- a/keyboards/akb/raine/raine.h +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2019 Elliot Powell - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "quantum.h" - -#define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K113, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K311, K312, K313, K314, K315, \ - K400, K402, K404, K405, K407, K409, K410, K412, K413, K414, K415 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, KC_NO, K113, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K311, KC_NO, K312, K313, K314, K315 }, \ - { K400, KC_NO, K402, KC_NO, K404, K405, KC_NO, K407, KC_NO, K409, K410, KC_NO, K412, K413, K414, K415 } \ -} diff --git a/keyboards/akb/raine/readme.md b/keyboards/akb/raine/readme.md deleted file mode 100644 index 6aa11a11fd8..00000000000 --- a/keyboards/akb/raine/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Raine-m³ - -![Raine-m³](https://i.imgur.com/da2dZh1.jpg) - -A custom board inspired by both the 1800 layout, and the compact functionality of 40% boards. - -Keyboard Maintainer: [e11i0t23](https://github.com/e11i0t23) -Hardware Supported: Official Raine-m³ PCB -Hardware Availability: Coming Soon - -Make example for this keyboard (after setting up your build environment): - - make akb/raine:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk deleted file mode 100644 index 195c9e50236..00000000000 --- a/keyboards/akb/raine/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/al1/al1.c b/keyboards/al1/al1.c deleted file mode 100644 index e50a6373b40..00000000000 --- a/keyboards/al1/al1.c +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "al1.h" - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - CONFIG_LED_IO; - print_dec(usb_led); - if (usb_led & (1<. - */ -#ifndef AL1_H -#define AL1_H - -#include "quantum.h" - -#define CONFIG_LED_IO \ - DDRB |= (1<<7) | (1<<6); \ - DDRD |= (1<<0) | (1<<1); - - -#define LAYOUT( \ - K500, K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K415, K414,\ - K501, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K215, K413,\ - K502, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K503, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K412,\ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411 \ -) \ -{ \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215}, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315}, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415}, \ - { K500, K501, K502, K503, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} \ -} - -#define LAYOUT_split_bs( \ - K500, K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K512, K012, K013, K014, K015, K415, K414, \ - K501, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K215, K413,\ - K502, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ - K503, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K412,\ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411 \ -) \ -{ \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215}, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315}, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415}, \ - { K500, K501, K502, K503, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K512, KC_NO, KC_NO, KC_NO} \ -} - -#endif diff --git a/keyboards/al1/config.h b/keyboards/al1/config.h deleted file mode 100644 index f4ded4346cd..00000000000 --- a/keyboards/al1/config.h +++ /dev/null @@ -1,181 +0,0 @@ -/* -Copyright 2018 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6050 -#define DEVICE_VER 0x0104 -#define MANUFACTURER Alsoran -#define PRODUCT AL1 -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 20 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B6 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/al1/info.json b/keyboards/al1/info.json deleted file mode 100644 index f5ab643997a..00000000000 --- a/keyboards/al1/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "AL1", - "url": "", - "maintainer": "qmk", - "width": 20.5, - "height": 5.25, - "layouts": { - "LAYOUT": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}] - }, - "LAYOUT_split_bs": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}] - } - } -} diff --git a/keyboards/al1/keymaps/default/keymap.c b/keyboards/al1/keymaps/default/keymap.c deleted file mode 100644 index 5da3b5a7b2f..00000000000 --- a/keyboards/al1/keymaps/default/keymap.c +++ /dev/null @@ -1,65 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT(\ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_P7, KC_P8, KC_P9, KC_PPLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT, KC_P0, KC_PDOT ), - - [1] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,\ - KC_TAB, KC_Q, KC_W, KC_E, RESET, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_P7, KC_P8, KC_P9, KC_PPLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_TRNS, KC_RGUI, KC_RCTRL, BL_TOGG, BL_DEC, BL_INC, KC_P0, KC_PDOT ), -}; - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/al1/keymaps/default/readme.md b/keyboards/al1/keymaps/default/readme.md deleted file mode 100644 index b89f4f67451..00000000000 --- a/keyboards/al1/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for al1 diff --git a/keyboards/al1/keymaps/splitbs/keymap.c b/keyboards/al1/keymaps/splitbs/keymap.c deleted file mode 100644 index 42bdfc7ec10..00000000000 --- a/keyboards/al1/keymaps/splitbs/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_split_bs(\ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRAVE, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_P7, KC_P8, KC_P9, KC_PPLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT, KC_P0, KC_PDOT ), - [1] = LAYOUT_split_bs(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_GRAVE, KC_DELETE, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, RESET, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_P7, KC_P8, KC_P9, KC_PPLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_TRNS, KC_RGUI, KC_RCTRL, BL_TOGG, BL_DEC, BL_INC, KC_P0, KC_PDOT ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/al1/matrix.c b/keyboards/al1/matrix.c deleted file mode 100644 index f6e95108737..00000000000 --- a/keyboards/al1/matrix.c +++ /dev/null @@ -1,201 +0,0 @@ -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static uint8_t read_rows(void); -static void init_rows(void); -static void unselect_cols(void); -static void select_col(uint8_t col); - -inline uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void matrix_init(void) { - // initialize row and col - unselect_cols(); - init_rows(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - uint8_t rows = read_rows(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Alf -#define PRODUCT dc60 -#define DESCRIPTION custom 60% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } -#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B6 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/alf/dc60/dc60.c b/keyboards/alf/dc60/dc60.c deleted file mode 100644 index 70979adf4ef..00000000000 --- a/keyboards/alf/dc60/dc60.c +++ /dev/null @@ -1,49 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "dc60.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 7); - PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); - PORTB &= ~(1 << 7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/alf/dc60/dc60.h b/keyboards/alf/dc60/dc60.h deleted file mode 100644 index db5154a28cf..00000000000 --- a/keyboards/alf/dc60/dc60.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef DC60_H -#define DC60_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments representing the physical -// layout of the board and position of the keys -// The second converts the arguments into a two-dimensional array which -// represents the switch matrix. -#define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KOD, KOE, \ - K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K42, K43, K45, K47, K48, K4A, K4B, K4C, K4D, K4E \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KOD, KOE }, \ - { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, K42, K43, KC_NO, K45, KC_NO, K47, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ -} - -#endif diff --git a/keyboards/alf/dc60/info.json b/keyboards/alf/dc60/info.json deleted file mode 100644 index 1c3ebf4f0ab..00000000000 --- a/keyboards/alf/dc60/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "dc60", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}] - } - } -} \ No newline at end of file diff --git a/keyboards/alf/dc60/keymaps/default/config.h b/keyboards/alf/dc60/keymaps/default/config.h deleted file mode 100644 index a3ed4f762a6..00000000000 --- a/keyboards/alf/dc60/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/alf/dc60/keymaps/default/keymap.c b/keyboards/alf/dc60/keymaps/default/keymap.c deleted file mode 100644 index a4385bcc0b2..00000000000 --- a/keyboards/alf/dc60/keymaps/default/keymap.c +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2018 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT - ), - - [1] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LSFT, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/alf/dc60/keymaps/default/readme.md b/keyboards/alf/dc60/keymaps/default/readme.md deleted file mode 100644 index 85bef5fc7b2..00000000000 --- a/keyboards/alf/dc60/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for dc60 diff --git a/keyboards/alf/dc60/readme.md b/keyboards/alf/dc60/readme.md deleted file mode 100644 index d8e20a8f4f7..00000000000 --- a/keyboards/alf/dc60/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# dc60 - -![dc60](imgur.com image replace me!) - -A 60% PCB sold with the Alf DC60. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: DC60 PCB -Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=96616.0) - -Make example for this keyboard (after setting up your build environment): - - make alf/dc60:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk deleted file mode 100644 index 9ad6d7875ef..00000000000 --- a/keyboards/alf/dc60/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h deleted file mode 100644 index 587e97cd87f..00000000000 --- a/keyboards/alf/x11/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Alf -#define PRODUCT x11 -#define DESCRIPTION A TKL custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 13 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, F0, F1, F4, F5, F6 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN F7 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 28 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS -/*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json deleted file mode 100644 index ca794f56ce7..00000000000 --- a/keyboards/alf/x11/info.json +++ /dev/null @@ -1,103 +0,0 @@ -{ - "keyboard_name": "QMK80", - "url": "", - "maintainer": "qmk", - "width": 18.25, - "height": 6.5, - "layouts": { - "LAYOUT": { - "key_count": 88, - "layout": [ - {"label":"K00", "x":0, "y":0}, - {"label":"K01", "x":2, "y":0}, - {"label":"K02", "x":3, "y":0}, - {"label":"K03", "x":4, "y":0}, - {"label":"K04", "x":5, "y":0}, - {"label":"K05", "x":6.5, "y":0}, - {"label":"K06", "x":7.5, "y":0}, - {"label":"K07", "x":8.5, "y":0}, - {"label":"K08", "x":9.5, "y":0}, - {"label":"K09", "x":11, "y":0}, - {"label":"K0A", "x":12, "y":0}, - {"label":"K0B", "x":13, "y":0}, - {"label":"K0C", "x":14, "y":0}, - {"label":"K60", "x":15.25, "y":0}, - {"label":"K61", "x":16.25, "y":0}, - {"label":"K62", "x":17.25, "y":0}, - {"label":"K10", "x":0, "y":1.5}, - {"label":"K11", "x":1, "y":1.5}, - {"label":"K12", "x":2, "y":1.5}, - {"label":"K13", "x":3, "y":1.5}, - {"label":"K14", "x":4, "y":1.5}, - {"label":"K15", "x":5, "y":1.5}, - {"label":"K16", "x":6, "y":1.5}, - {"label":"K17", "x":7, "y":1.5}, - {"label":"K18", "x":8, "y":1.5}, - {"label":"K19", "x":9, "y":1.5}, - {"label":"K1A", "x":10, "y":1.5}, - {"label":"K1B", "x":11, "y":1.5}, - {"label":"K1C", "x":12, "y":1.5}, - {"label":"K5A", "x":13, "y":1.5, "w":2}, - {"label":"K63", "x":15.25, "y":1.5}, - {"label":"K65", "x":16.25, "y":1.5}, - {"label":"K67", "x":17.25, "y":1.5}, - {"label":"K20", "x":0, "y":2.5, "w":1.5}, - {"label":"K21", "x":1.5, "y":2.5}, - {"label":"K22", "x":2.5, "y":2.5}, - {"label":"K23", "x":3.5, "y":2.5}, - {"label":"K24", "x":4.5, "y":2.5}, - {"label":"K25", "x":5.5, "y":2.5}, - {"label":"K26", "x":6.5, "y":2.5}, - {"label":"K27", "x":7.5, "y":2.5}, - {"label":"K28", "x":8.5, "y":2.5}, - {"label":"K29", "x":9.5, "y":2.5}, - {"label":"K2A", "x":10.5, "y":2.5}, - {"label":"K2B", "x":11.5, "y":2.5}, - {"label":"K2C", "x":12.5, "y":2.5}, - {"label":"K4C", "x":13.5, "y":2.5, "w":1.5}, - {"label":"K64", "x":15.25, "y":2.5}, - {"label":"K66", "x":16.25, "y":2.5}, - {"label":"K68", "x":17.25, "y":2.5}, - {"label":"K30", "x":0, "y":3.5, "w":1.75}, - {"label":"K31", "x":1.75, "y":3.5}, - {"label":"K32", "x":2.75, "y":3.5}, - {"label":"K33", "x":3.75, "y":3.5}, - {"label":"K34", "x":4.75, "y":3.5}, - {"label":"K35", "x":5.75, "y":3.5}, - {"label":"K36", "x":6.75, "y":3.5}, - {"label":"K37", "x":7.75, "y":3.5}, - {"label":"K38", "x":8.75, "y":3.5}, - {"label":"K39", "x":9.75, "y":3.5}, - {"label":"K3A", "x":10.75, "y":3.5}, - {"label":"K3B", "x":11.75, "y":3.5}, - {"label":"K3C", "x":12.75, "y":3.5, "w":2.25}, - {"label":"K40", "x":0, "y":4.5, "w":2.25}, - {"label":"K41", "x":2.25, "y":4.5}, - {"label":"K42", "x":3.25, "y":4.5}, - {"label":"K43", "x":4.25, "y":4.5}, - {"label":"K44", "x":5.25, "y":4.5}, - {"label":"K45", "x":6.25, "y":4.5}, - {"label":"K46", "x":7.25, "y":4.5}, - {"label":"K47", "x":8.25, "y":4.5}, - {"label":"K48", "x":9.25, "y":4.5}, - {"label":"K49", "x":10.25, "y":4.5}, - {"label":"K4A", "x":11.25, "y":4.5}, - {"label":"K4B", "x":12.25, "y":4.5, "w":1.75}, - {"label":"K69", "x":14, "y":4.5}, - {"label":"K58", "x":16.25, "y":4.5}, - {"label":"K50", "x":0, "y":5.5, "w":1.25}, - {"label":"K51", "x":1.25, "y":5.5, "w":1.25}, - {"label":"K52", "x":2.5, "y":5.5, "w":1.25}, - {"label":"K53", "x":3.75, "y":5.5, "w":6.25}, - {"label":"K54", "x":10, "y":5.5, "w":1.25}, - {"label":"K55", "x":11.25, "y":5.5, "w":1.25}, - {"label":"K56", "x":12.5, "y":5.5, "w":1.25}, - {"label":"K57", "x":13.75, "y":5.5, "w":1.25}, - {"label":"K6A", "x":15.25, "y":5.5}, - {"label":"K59", "x":16.25, "y":5.5}, - {"label":"K6B", "x":17.25, "y":5.5} - ] - } - } - } - \ No newline at end of file diff --git a/keyboards/alf/x11/keymaps/default/config.h b/keyboards/alf/x11/keymaps/default/config.h deleted file mode 100644 index 26c6d6ade10..00000000000 --- a/keyboards/alf/x11/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/alf/x11/keymaps/default/keymap.c b/keyboards/alf/x11/keymaps/default/keymap.c deleted file mode 100644 index cd97dd0a2b4..00000000000 --- a/keyboards/alf/x11/keymaps/default/keymap.c +++ /dev/null @@ -1,78 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, \ - KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, \ - KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, \ - KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, \ - KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_LCTL, \ - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - [1] = LAYOUT( \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_MPLY, KC_MSTP, RGB_TOG, RGB_MOD, \ - RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_VAD, RGB_SAD \ - ), - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/alf/x11/keymaps/default/readme.md b/keyboards/alf/x11/keymaps/default/readme.md deleted file mode 100644 index a08c59173fe..00000000000 --- a/keyboards/alf/x11/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for x11 diff --git a/keyboards/alf/x11/readme.md b/keyboards/alf/x11/readme.md deleted file mode 100644 index b403a0952a4..00000000000 --- a/keyboards/alf/x11/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Alf X1.1 - -TKL Keyboard made by Alf - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Alf X1.1 PCB -Hardware Availability: [Massdrop](https://www.massdrop.com/buy/alf-studio-x1-1-custom-mechanical-keyboard-kit) - -Make example for this keyboard (after setting up your build environment): - - make alf/x11:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk deleted file mode 100644 index 180c60a4a4e..00000000000 --- a/keyboards/alf/x11/rules.mk +++ /dev/null @@ -1,82 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -EXTRAFLAGS += -flto diff --git a/keyboards/alf/x11/x11.c b/keyboards/alf/x11/x11.c deleted file mode 100644 index b91de016e28..00000000000 --- a/keyboards/alf/x11/x11.c +++ /dev/null @@ -1,63 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "x11.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - setPinOutput(C6); - setPinOutput(E6); - setPinOutput(C7); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(C6); - } else { - writePinHigh(C6); - } - - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinLow(E6); - } else { - writePinHigh(E6); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinLow(C7); - } else { - writePinHigh(C7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/alf/x11/x11.h b/keyboards/alf/x11/x11.h deleted file mode 100644 index 53f3a3e34d1..00000000000 --- a/keyboards/alf/x11/x11.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K60, K61, K62, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A, K63, K65, K67, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C, K64, K66, K68, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69, K58, \ - K50, K51, K52, K53, K54, K55, K56, K57, K6A, K59, K6B \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, KC_NO, KC_NO }, \ - { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, KC_NO }, \ -} diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h deleted file mode 100644 index 205fa358fca..00000000000 --- a/keyboards/alf/x2/config.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ALF -#define PRODUCT X2 -#define DESCRIPTION ALF X2 60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B6 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -#endif diff --git a/keyboards/alf/x2/info.json b/keyboards/alf/x2/info.json deleted file mode 100644 index 85db6d69aed..00000000000 --- a/keyboards/alf/x2/info.json +++ /dev/null @@ -1,32 +0,0 @@ -{ - "keyboard_name": "ALF X2", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 6, - "layouts": { - "LAYOUT": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"x":0, "y":4}, {"x":1, "y":4}, {"label":"Z", "x":2, "y":4}, {"label":"X", "x":3, "y":4}, {"label":"C", "x":4, "y":4}, {"label":"V", "x":5, "y":4}, {"label":"B", "x":6, "y":4}, {"label":"N", "x":7, "y":4}, {"label":"M", "x":8, "y":4}, {"label":"<", "x":9, "y":4}, {"label":">", "x":10, "y":4}, {"label":"?", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] - }, - - "LAYOUT_std_ansi": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":2.75}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}] - }, - - "LAYOUT_std_splits": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}] - }, - - "LAYOUT_hhkb": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"label":"Win", "x":1.5, "y":5, "w":1.25}, {"label":"Alt", "x":2.75, "y":5, "w":1.5}, {"x":4.25, "y":5, "w":6.25}, {"label":"Alt", "x":10.5, "y":5, "w":1.5}, {"label":"Win", "x":12, "y":5, "w":1.25}] - }, - - "LAYOUT_split_arrows": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4, "w":1.75}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] - }, - - "LAYOUT_2u_split_arrows": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4}, {"x":1, "y":4}, {"label":"Z", "x":2, "y":4}, {"label":"X", "x":3, "y":4}, {"label":"C", "x":4, "y":4}, {"label":"V", "x":5, "y":4}, {"label":"B", "x":6, "y":4}, {"label":"N", "x":7, "y":4}, {"label":"M", "x":8, "y":4}, {"label":"<", "x":9, "y":4}, {"label":">", "x":10, "y":4}, {"label":"?", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] - } - } -} \ No newline at end of file diff --git a/keyboards/alf/x2/keymaps/default/keymap.c b/keyboards/alf/x2/keymaps/default/keymap.c deleted file mode 100644 index 9470e38b562..00000000000 --- a/keyboards/alf/x2/keymaps/default/keymap.c +++ /dev/null @@ -1,42 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_VOLU, KC_VOLD, - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_NO, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL), - - LAYOUT( - KC_MNXT, KC_MPRV, - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } -} diff --git a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c b/keyboards/alf/x2/keymaps/hhkb_60/keymap.c deleted file mode 100644 index 8baba1ae9d6..00000000000 --- a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c +++ /dev/null @@ -1,42 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_VOLU, KC_VOLD, - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL), - - LAYOUT( - KC_MNXT, KC_MPRV, - KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } -} \ No newline at end of file diff --git a/keyboards/alf/x2/readme.md b/keyboards/alf/x2/readme.md deleted file mode 100644 index b171b5c7933..00000000000 --- a/keyboards/alf/x2/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# X2 - -![x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076) - -A customizable 60% keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: ALF X2 60% -Hardware Availability: [zFrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60) - -Make example for this keyboard (after setting up your build environment): - - make alf/x2:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk deleted file mode 100644 index 9c4082da29f..00000000000 --- a/keyboards/alf/x2/rules.mk +++ /dev/null @@ -1,56 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes \ No newline at end of file diff --git a/keyboards/alf/x2/x2.c b/keyboards/alf/x2/x2.c deleted file mode 100644 index 111712f0b50..00000000000 --- a/keyboards/alf/x2/x2.c +++ /dev/null @@ -1 +0,0 @@ -#include "x2.h" diff --git a/keyboards/alf/x2/x2.h b/keyboards/alf/x2/x2.h deleted file mode 100644 index c6c587aea94..00000000000 --- a/keyboards/alf/x2/x2.h +++ /dev/null @@ -1,98 +0,0 @@ -#ifndef X2_H -#define X2_H - -#include "quantum.h" - -// K404 and K408 are the microswitches at the top of the PCB - -#define LAYOUT( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_std_ansi( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} - -#define LAYOUT_std_splits( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} - -#define LAYOUT_hhkb( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K401, K403, K406, K410, K411 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { KC_NO, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, KC_NO, KC_NO } \ -} - -#define LAYOUT_2u_split_arrows( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_split_arrows( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#endif diff --git a/keyboards/alice/alice.c b/keyboards/alice/alice.c deleted file mode 100644 index adb88fef0a8..00000000000 --- a/keyboards/alice/alice.c +++ /dev/null @@ -1,55 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include - -#include "rgblight.h" - -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} -#endif diff --git a/keyboards/alice/alice.h b/keyboards/alice/alice.h deleted file mode 100644 index 1486612f9f1..00000000000 --- a/keyboards/alice/alice.h +++ /dev/null @@ -1,50 +0,0 @@ -/* -Copyright 2019 Felipe Coury - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - -/* LAYOUT - * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┬───┬───┬───┐ - * │50 │ │00 │01 │02 │03 │04 │05 │06 │ │07 │08 │09 │0A │0B │0C │0D │0E │ - * ├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┘ ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │51 │ │10 │11 │12 │13 │14 │15 │ │16 │17 │18 │19 │1A │1B │1C │1D │ - * ├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ └┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │52 │ │20 │21 │22 │23 │24 │25 │ │26 │27 │28 │29 │2A │2B │2C │ - * └───┘ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┐ ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │30 │31 │32 │33 │34 │35 │ │36 │37 │38 │39 │4A │4B │4C │4D │ - * ├─────┬──┴──┬┴───┴┬──┴───┴┬──┴─┐ ├───┴───┴──┬┴───┴┬──┴───┴────┬─┴───┤ - * │40 │ │41 │42 │43 │ │46 │47 │ │48 │ - * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ - */ -#define LAYOUT( \ - K50, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K51, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K52, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K4A, K4B, K4C, K4D, \ - K40, K41, K42, K43, K46, K47, K48 \ -) \ -{ \ - { K00 , K01 , K02 , K03 , K04 , K05 , K06 , K07 , K08 , K09 , K0A , K0B , K0C , K0D , K0E }, \ - { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 , K18 , K19 , K1A , K1B , K1C , K1D , KC_NO }, \ - { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 , K28 , K29 , K2A , K2B , K2C , KC_NO, KC_NO }, \ - { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 , K38 , K39 , K4A , K4B , K4C , K4D , KC_NO }, \ - { K40 , K41 , K42 , K43 , KC_NO, KC_NO, K46 , K47 , K48 , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { K50 , K51 , K52 , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ -} - diff --git a/keyboards/alice/config.h b/keyboards/alice/config.h deleted file mode 100644 index 07b9599f58e..00000000000 --- a/keyboards/alice/config.h +++ /dev/null @@ -1,39 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422E -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER TGR -#define PRODUCT TGR Alice - -/* matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 15 - -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } -#define DIODE_DIRECTION COL2ROW - -#define RGBLED_NUM 18 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 diff --git a/keyboards/alice/info.json b/keyboards/alice/info.json deleted file mode 100644 index b2620933267..00000000000 --- a/keyboards/alice/info.json +++ /dev/null @@ -1,80 +0,0 @@ -{ - "keyboard_name": "TGR Alice", - "url": "", - "maintainer": "Felipe Coury", - "width": 17.75, - "height": 5, - "layouts": { - "LAYOUT": { - "key_count": 66, - "layout": [ - {"label":"K63", "x":0, "y":0}, - {"label":"K00", "x":1.25, "y":0}, - {"label":"K01", "x":2.25, "y":0}, - {"label":"K02", "x":3.25, "y":0}, - {"label":"K03", "x":4.25, "y":0}, - {"label":"K04", "x":5.25, "y":0}, - {"label":"K05", "x":6.25, "y":0}, - {"label":"K06", "x":7.25, "y":0}, - {"label":"K07", "x":10.25, "y":0}, - {"label":"K08", "x":11.25, "y":0}, - {"label":"K09", "x":12.25, "y":0}, - {"label":"K10", "x":13.25, "y":0}, - {"label":"K11", "x":14.25, "y":0}, - {"label":"K12", "x":15.25, "y":0}, - {"label":"K13", "x":16.25, "y":0}, - {"label":"K14", "x":17.25, "y":0}, - {"label":"K64", "x":0, "y":1}, - {"label":"K15", "x":1.25, "y":1, "w":1.5}, - {"label":"K16", "x":2.75, "y":1}, - {"label":"K17", "x":3.75, "y":1}, - {"label":"K18", "x":4.75, "y":1}, - {"label":"K19", "x":5.75, "y":1}, - {"label":"K20", "x":6.75, "y":1}, - {"label":"K21", "x":9.75, "y":1}, - {"label":"K22", "x":10.75, "y":1}, - {"label":"K23", "x":11.75, "y":1}, - {"label":"K24", "x":12.75, "y":1}, - {"label":"K25", "x":13.75, "y":1}, - {"label":"K26", "x":14.75, "y":1}, - {"label":"K27", "x":15.75, "y":1}, - {"label":"K28", "x":16.75, "y":1, "w":1.5}, - {"label":"K65", "x":0, "y":2}, - {"label":"K29", "x":1.25, "y":2, "w":1.75}, - {"label":"K30", "x":3, "y":2}, - {"label":"K31", "x":4, "y":2}, - {"label":"K32", "x":5, "y":2}, - {"label":"K33", "x":6, "y":2}, - {"label":"K34", "x":7, "y":2}, - {"label":"K35", "x":10, "y":2}, - {"label":"K36", "x":11, "y":2}, - {"label":"K37", "x":12, "y":2}, - {"label":"K38", "x":13, "y":2}, - {"label":"K39", "x":14, "y":2}, - {"label":"K40", "x":15, "y":2}, - {"label":"K41", "x":16, "y":2, "w":2.25}, - {"label":"K42", "x":1.25, "y":3, "w":2.25}, - {"label":"K43", "x":3.5, "y":3}, - {"label":"K44", "x":4.5, "y":3}, - {"label":"K45", "x":5.5, "y":3}, - {"label":"K46", "x":6.5, "y":3}, - {"label":"K47", "x":7.5, "y":3}, - {"label":"K48", "x":9.5, "y":3}, - {"label":"K49", "x":10.5, "y":3}, - {"label":"K50", "x":11.5, "y":3}, - {"label":"K51", "x":12.5, "y":3}, - {"label":"K52", "x":13.5, "y":3}, - {"label":"K53", "x":14.5, "y":3}, - {"label":"K54", "x":15.5, "y":3, "w":1.75}, - {"label":"K55", "x":17.25, "y":3}, - {"label":"K56", "x":1.25, "y":4, "w":1.5}, - {"label":"K57", "x":4.25, "y":4, "w":1.5}, - {"label":"K58", "x":5.75, "y":4, "w":2}, - {"label":"K59", "x":7.75, "y":4, "w":1.25}, - {"label":"K60", "x":9.5, "y":4, "w":2.75}, - {"label":"K61", "x":12.25, "y":4, "w":1.5}, - {"label":"K62", "x":16.75, "y":4, "w":1.5} - ] - } - } -} diff --git a/keyboards/alice/keymaps/default/keymap.c b/keyboards/alice/keymaps/default/keymap.c deleted file mode 100644 index 29fff66183d..00000000000 --- a/keyboards/alice/keymaps/default/keymap.c +++ /dev/null @@ -1,35 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, \ - KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ - KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL \ - ), - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP , _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ - ), -}; diff --git a/keyboards/alice/keymaps/mrkeebs/keymap.c b/keyboards/alice/keymaps/mrkeebs/keymap.c deleted file mode 100644 index 3d8099c4139..00000000000 --- a/keyboards/alice/keymaps/mrkeebs/keymap.c +++ /dev/null @@ -1,35 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, \ - KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ - KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL \ - ), - [1] = LAYOUT( - RESET, KC_GRV , KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, \ - _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP , _______, _______, \ - _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ - ), -}; diff --git a/keyboards/alice/readme.md b/keyboards/alice/readme.md deleted file mode 100644 index 8e901ae7e44..00000000000 --- a/keyboards/alice/readme.md +++ /dev/null @@ -1,60 +0,0 @@ -# TGR Alice - -![TGR Alice](https://i.imgur.com/cJohEqS.jpg) - -An ergonomic 60% keyboard. - -Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) -Hardware Supported: TGR Alice -Hardware Availability: Group buy finished - -Make example for this keyboard (after setting up your build environment): - - make alice:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - - -ps2avrGB keyboard firmware -========================== - -This keyboard uses the port of the QMK firmware for boards that are based on the -ps2avrGB firmware. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make alice -$ bootloadHID -r alice_default.hex -``` - -## Setting the board to bootloader mode - -Hold the ESC key (the one before the 1! key, in case you remaped it). - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while holding the bootloader key. This will force - it to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. diff --git a/keyboards/alice/rules.mk b/keyboards/alice/rules.mk deleted file mode 100644 index eecd38d7e76..00000000000 --- a/keyboards/alice/rules.mk +++ /dev/null @@ -1,48 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = full -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/alice/usbconfig.h b/keyboards/alice/usbconfig.h deleted file mode 100644 index df7a88e3abd..00000000000 --- a/keyboards/alice/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'T', 'G', 'R' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'T', 'G', 'R', ' ', 'A', 'l', 'i', 'c', 'e' -#define USB_CFG_DEVICE_NAME_LEN 9 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/alpha/alpha.c b/keyboards/alpha/alpha.c deleted file mode 100755 index 3029ba50a83..00000000000 --- a/keyboards/alpha/alpha.c +++ /dev/null @@ -1 +0,0 @@ -#include "alpha.h" diff --git a/keyboards/alpha/alpha.h b/keyboards/alpha/alpha.h deleted file mode 100755 index 025a3ac5fbb..00000000000 --- a/keyboards/alpha/alpha.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef KB_H -#define KB_H - -#include "quantum.h" - -#define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \ - K200, K201, K202, K203, K205, K207, K208, K209 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109 }, \ - { K200, K201, K202, K203, KC_NO, K205, KC_NO, K207, K208, K209 } \ -} - -#endif diff --git a/keyboards/alpha/config.h b/keyboards/alpha/config.h deleted file mode 100755 index b7348bef17f..00000000000 --- a/keyboards/alpha/config.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER PyroL -#define PRODUCT alpha -#define DESCRIPTION 28-key keyboard by PyroL - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 10 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D4, B4, B5 } -#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ - -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN F4 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 5 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -#endif diff --git a/keyboards/alpha/info.json b/keyboards/alpha/info.json deleted file mode 100644 index b08e6d9a419..00000000000 --- a/keyboards/alpha/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Alpha", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 10, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2, "w":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}] - } - } -} diff --git a/keyboards/alpha/keymaps/default/keymap.c b/keyboards/alpha/keymaps/default/keymap.c deleted file mode 100755 index c18790fe4b3..00000000000 --- a/keyboards/alpha/keymaps/default/keymap.c +++ /dev/null @@ -1,49 +0,0 @@ -#include QMK_KEYBOARD_H - -#define HOME 0 -#define MODS 1 -#define MODS2 2 -#define OTHER 3 - -enum custom_keycodes { - MACRO1 = SAFE_RANGE -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch (keycode) { - case MACRO1: - SEND_STRING("I'm so sorry... -PyroL"); - return false; - } - } - return true; -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [HOME] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), - KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M), - - [MODS] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, - KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), - KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH), - - [MODS2] = LAYOUT( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, - KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), - RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU), - - [OTHER] = LAYOUT( - RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, TO(0), MACRO1, KC_NO, KC_NO, KC_NO), -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} diff --git a/keyboards/alpha/keymaps/vderm/README.md b/keyboards/alpha/keymaps/vderm/README.md deleted file mode 100644 index 26a8ab3e85f..00000000000 --- a/keyboards/alpha/keymaps/vderm/README.md +++ /dev/null @@ -1,35 +0,0 @@ -# Alpha 28-Key Keyboard Alternate Keymap -Alternate keymap for [Alpha 28-key keyboard](https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha). - -## How-to -Assuming you've followed all the instructions from the original post, put my "keymap.c" file in "$qmk-firmware-folder$/keyboards/alpha/keymaps/vderm/" and then run your make command ("make alpha:vderm" while in $qmk-firmware-folder$ where this folder is what you've downloaded from the official github page) to compile the hex file to upload to your microcontroller. I've also uploaded my hex file. - -## Description -Instead of going up and down layers like in the original Alpha keyboard, I've made the bottom row keys all have alternate functions: -+ Like in the original Alpha28 keymap, the 2U spacebar is a shift key when held down and space when tapped -+ Z and M are Ctrl keys when held down or Z and M when tapped -+ X and N are Alt keys -+ C activates the function keys layer (arrows, page up/dn, esc, tab, etc.) -+ V activates the characters and numbers layer -+ C and V combined activated the F-keys layer (F1, F2, F3, etc.) -+ The enter key is an enter key in the home layer, backspace in the function keys and characters/numbers layer and a delete in the F-keys layer -+ While in the other layers, the bottom row acts like a "regular" bottom modified row: ctrl, alt, winkey - -## Keymap -![keymap](https://imgur.com/ZbDz0eL.jpg) - -## Build Images -Here is my keyboard. -+ Switches: Aliaz Silent Switches (Tactile), PCB mount, 80g from [KBDfans](https://kbdfans.cn/collections/aliaz-switches/products/pre-orderaliaz-silent-switch-tactile?variant=2519899832333) -+ PCB board: ordered from JLCPCB, in white -+ Keycaps: ebay, can't find link :S -+ Bottom plate: I cut a piece of canary wood that was laying around, needs to be varnished; I also need to actually screw the pcb to the wood instead of relying on double-sided tape - -![vderm_alpha0](https://imgur.com/MjjoVtr.jpg) -![vderm_alpha1](https://imgur.com/mIFu9WV.jpg) -![vderm_alpha2](https://imgur.com/A70Iemw.jpg) -![vderm_alpha3](https://imgur.com/eYljPWh.jpg) -![vderm_alpha4](https://imgur.com/OhUKowj.jpg) - -Good luck on your build! -//vderm diff --git a/keyboards/alpha/keymaps/vderm/alpha_vderm.hex b/keyboards/alpha/keymaps/vderm/alpha_vderm.hex deleted file mode 100644 index 7515ad03051..00000000000 --- a/keyboards/alpha/keymaps/vderm/alpha_vderm.hex +++ /dev/null @@ -1,1422 +0,0 @@ -:100000000C949F020C94E6020C94E6020C94E60217 -:100010000C94E6020C94E6020C94E6020C94E602C0 -:100020000C94E6020C94E6020C94E0250C94B226A3 -:100030000C940D1D0C94E6020C94E6020C94E6025E -:100040000C94E6020C94E6020C94E6020C94E60290 -:100050000C94E6020C94751D0C94E6020C94E602D6 -:100060000C94E6020C94E6020C94E6020C94E60270 -:100070000C94E6020C94E6020C94E6020C94E60260 -:100080000C94E6020C94E6020C94E6020C94E60250 -:100090000C94E6020C94E6020C94E6020C94E60240 -:1000A0000C94E6020C94E6020C94E602AE03B00354 -:1000B000BB03B203B403B603B803BA03BD03BF0363 -:1000C000C103CC03C303C503C703C903CB03CE03DA -:1000D000181318134A134A138813A6130C150C157A -:1000E000E8130C158B148B14FC140C150C1505154A -:1000F00098149814981498149814981498149814A0 -:10010000981498149814981498149814981498148F -:10011000A914B714BE14C514CF149D159D15AF15A1 -:10012000AF15A615AF15AF15AF159D159D15AB15E0 -:10013000AF15AF15AB151F2746273E2846273E288B -:100140009227B5273E280C281B2807634236B79B09 -:10015000D8A71A39685618AEBAAB558C1D3CB7CC27 -:100160005763BD6DEDFD753EF6177231BF0000009F -:10017000803F05A84CCDB2D44EB93836A9020C50F8 -:10018000B9918688083CA6AAAA2ABE000000803F32 -:1001900014001A000800150017001C0018000C00BD -:1001A0001200130004001600070009000A000B00EB -:1001B0000D000E000F0028001D611B64064119424E -:1001C00000002C62000005781174107129007F0076 -:1001D000AA00A900AE004A004E004B004D000000EE -:1001E0002B000000000000000000500051005200F1 -:1001F0004F002A00E000E2000100035100002C62E1 -:100200000000E700E600E4001E001F0020002100BF -:1002100022002300240025002600270035000000CE -:100220002D002E0031002F003000330034002A0052 -:10023000E000E2000351010000002C6200003600E3 -:10024000370038003A003B003C003D003E003F00D4 -:10025000400041004200430044004500000000000F -:10026000000000000000000000004C00E000E20080 -:100270000100010000002C620000E700E600E4003D -:1002800000047F3F1F643214643214783C1E1E1435 -:100290000A056801F000B40078005A000000000070 -:1002A0000001010101010101010102020202020239 -:1002B000020202030303030303030304040404040C -:1002C00004050505050506060606060707070708CF -:1002D0000808080909090A0A0A0A0B0B0B0C0C0C7E -:1002E0000D0D0D0E0E0F0F0F101011111112121314 -:1002F000131414151516161717181819191A1A1B8E -:100300001C1C1D1D1E1F1F202021222223242525E9 -:1003100026272728292A2B2B2C2D2E2F2F30313220 -:1003200033343536363738393A3B3C3D3E3F404131 -:10033000424344464748494A4B4C4D4F5051525313 -:10034000555657585A5B5C5E5F60626364666769C6 -:100350006A6C6D6E707173747678797B7C7E808147 -:10036000838486888A8B8D8F91929496989A9B9D90 -:100370009FA1A3A5A7A9ABADAFB1B3B5B7B9BBBD9D -:10038000BFC1C4C6C8CACCCFD1D3D6D8DADCDFE16E -:10039000E4E6E8EBEDF0F2F5F7FAFCFF04033000D9 -:1003A00000000C0361006C00700068006100000038 -:1003B0000C035000790072006F004C000000040331 -:1003C000090409026D00040100A0FA0904000001FB -:1003D00003010100092111010001224000070581EC -:1003E0000308000A090401000103010200092111A8 -:1003F000010001224D000705820308000A090402DA -:10040000000103000000092111010001223600074C -:1004100005830308000A0904030001030000000922 -:100420002111010001223900070584032000011277 -:1004300001100100000008EDFE60600100010203F0 -:100440000105010906A101050719E029E7150025A5 -:1004500001950875018102050819012905950575A1 -:100460000191029501750391010507190029F715FE -:1004700000250195F875018102C005010980A101DF -:1004800085021601002603001A81002A83007510D8 -:1004900095018100C0050C0901A101850316010029 -:1004A000269C021A01002A9C02751095018100C049 -:1004B00005010902A1010901A10005091901290588 -:1004C00015002501950575018102950175038101CE -:1004D0000501093009311581257F950275088106CE -:1004E00009381581257F950175088106050C0A38A4 -:1004F000021581257F950175088106C0C005010997 -:1005000006A101050719E029E715002501950875E1 -:1005100001810295017508810105081901290595D8 -:1005200005750191029501750391010507190029CF -:10053000FF150026FF00950675088100C0001124F4 -:100540001FBECFEFDAE0DEBFCDBF04B603FE27C08B -:100550008091620290916302A0916402B091650261 -:100560008730904BA740B04BD1F4109262021092AA -:100570006302109264021092650214BE84B7877FF2 -:1005800084BF0FB6F894A89580916000886180932D -:100590006000109260000FBEE0E0F8E3099511E002 -:1005A000A0E0B1E0E0E8F8E502C005900D92A234C9 -:1005B000B107D9F722E0A2E4B1E001C01D92A23652 -:1005C000B207E1F70E940B230C943E2C0C94000020 -:1005D0000895089581E0089581E008950C94EC0257 -:1005E0000C9461080C94630808950C94F4020C9424 -:1005F000F50208950E9489150E94F9022FEF84E305 -:100600009CE0215080409040E1F700C0000087E767 -:1006100097E790930108809300080C949B1DFF922C -:100620000F931F93CF93DF938C01FC01C081D18185 -:1006300080919101811113C08281882349F0CE01FC -:100640000E94E61AF82E682FCE010E948F1A04C06D -:10065000CE010E94BA1AF82EBE018F2D04C0CE0121 -:100660000E94E61ABE010E94B305EC01B8010E9487 -:10067000EE02882309F46CC2B801CE010E94120870 -:10068000882309F465C2C93CFCE5DF0741F4F801A1 -:100690008281882309F45CC20E94290A59C2CA3C9B -:1006A0008CE5D80708F013C1C13C9CE5D90761F47B -:1006B000F8018281882309F44BC20E94B71B827221 -:1006C000F1F00E94490C44C2C23CECE5DE07D0F0D8 -:1006D000F8018281C53CFCE5DF0709F4CDC008F0D4 -:1006E000DDC0C33CECE5DE0709F4CCC008F0D0C0A7 -:1006F000882309F42DC20E94B71B827211F30E9455 -:100700003F0C26C2C531FCE5DF0708F07EC0C230D1 -:100710008CE5D80708F452C0F8018281882309F4D7 -:1007200059C00E94141C811102C00E94F31B0E9438 -:10073000311C90E09093540280935302FE01E350E9 -:10074000FC45E231F10530F4EA5AFF4F8091530243 -:100750000C94E32B80915302816027C0826025C0F6 -:10076000846023C0806121C080621FC080641DC07E -:1007700080681BC08460886018C08E7F16C08D7F23 -:1007800014C08B7F12C08F7E10C08F7D0EC08F7BF8 -:100790000CC08F770AC08B7F877F07C087FB22271B -:1007A00020F991E0922790FB87F980935302809182 -:1007B00053020E94351C0E948915CAC1C1159CE5CF -:1007C000D90781F0C130DC45A9F081E08093470171 -:1007D00080934801C801DF91CF911F910F91FF9045 -:1007E0000C94EA02F8018281882309F4B1C10E94C5 -:1007F000FA02AEC1F8018281882309F4A9C180916F -:100800000B02816080930B02A3C1C531FCE5DF07B9 -:1008100039F50E94B71B982FF801828120910D01B4 -:1008200030910E01882379F09A7A81E009F480E012 -:1008300080934201911102C069E201C065E3C901E0 -:100840000E94971C0AC080914201811102C069E296 -:1008500001C065E3C9010E94A21C0E94841B78C1EB -:10086000C03CDC4509F0B1CFF8018281882309F44E -:100870006FC10E94DA0C6CC1882309F469C10E941F -:10088000880B66C1882309F463C10E94510B60C1C3 -:10089000882309F45DC10E94690B5AC1C73C9CE5DD -:1008A000D90731F4882309F453C10E94BD0B50C10C -:1008B000C83CDC4530F4882309F44AC10E94A30BEC -:1008C00047C1882309F444C10E94D80B41C1C13DEE -:1008D000FCE5DF0749F4F8018281882309F438C177 -:1008E00088E10E943C0C34C1C23D8CE5D80708F079 -:1008F00087C0F8018281CD3CFCE5DF07A1F48823A5 -:1009000009F426C10E941B0A663071058105910514 -:1009100040F00E941B0A683071058105910508F4BA -:10092000EECE86E0DECFCE3C9CE5D90730F5CB3C61 -:10093000ECE5DE0729F4882309F40AC181E0D1CF70 -:10094000CC3CDC4530F4882309F402C10E943E0A05 -:10095000FFC0882309F4FCC00E941B0A62307105A5 -:100960008105910540F00E941B0A653071058105E3 -:10097000910508F4C4CE82E0B4CFCF3C9CE5D90702 -:10098000A1F4882309F4E4C00E941B0A6F307105AA -:100990008105910540F00E941B0A643171058105B3 -:1009A000910508F4ACCE8FE09CCFC03DDC45A0F4AF -:1009B000882309F4CDC00E941B0A693071058105A6 -:1009C000910540F00E941B0A6E307105810591056A -:1009D00008F495CE89E085CF882309F4B9C00E9438 -:1009E0001B0A653171058105910540F00E941B0AC3 -:1009F000673171058105910508F481CE85E171CFDC -:100A0000C53DFCE5DF0739F5F8018281882361F0F7 -:100A1000109248010E943F1D90934601809345012A -:100A200080E20E94D51294C08091480181110FC0CC -:100A300080914501909146010E944B1D883C910593 -:100A400030F487E20E94731187E20E946F1280E205 -:100A50000E94DC127DC0C63D8CE5D80708F043C07B -:100A6000F8018281C33DFCE5DF0729F4882309F4FE -:100A70006FC083E236CFC43DDC45A0F4882309F47F -:100A800067C00E941B0A693171058105910540F01C -:100A90000E941B0A623271058105910508F42FCE70 -:100AA00089E11FCF882351F0109247010E943F1D1A -:100AB000909344018093430182E0B3CF809147013A -:100AC00081110FC080914301909144010E944B1D00 -:100AD000883C910530F486E20E94731186E20E9400 -:100AE0006F1282E0B5CFC93DECE5DE0731F4F801C5 -:100AF0008281882369F180E009C0CA3DFCE5DF07F7 -:100B000041F4F8018281882319F182E00E94A72331 -:100B10001FC0C63DDC4509F058CEF8018281811125 -:100B200077CF80914801811192CF809145019091BA -:100B300046010E944B1D883C910508F088CF80E259 -:100B40000E94DC1288E20E94731188E20E946F12F8 -:100B500080E0DF91CF911F910F91FF90089580E089 -:100B600090E0089508952EE1829FC0011124FC01B8 -:100B70002AE0729FE00DF11D1124E60FF11DEE0F2A -:100B8000FF1FE057FE4F859194910895880F991F9C -:100B9000FC01E058FD4F859194910895CF93DF9328 -:100BA0000E94B3050E947207EC018115904508F080 -:100BB00041C0C11580E4D80708F01CC1C83ED1056A -:100BC00010F5C03ED10508F089C1C83AD10578F4C6 -:100BD000C53AD10508F09EC0C130D10509F47EC1E7 -:100BE00008F435C1C430D10508F078C130C1CD3B1F -:100BF000D10508F49AC0C03CD10508F428C1CE0143 -:100C0000805C9109E9C0C11590E2D90758F4C1157B -:100C100021E0D20708F062C1C03FD10508F417C136 -:100C2000D0655CC1C11580E3D80708F0D9C0CE01FA -:100C30009F70D2C0C11595E5D90708F044C0C11511 -:100C400024E5D20708F0EDC0C11582E5D80710F5FC -:100C5000C11591E5D90708F0D0C0CE0174E0969592 -:100C600087957A95E1F7282F23703C2F337081E028 -:100C700090E002C0880F991F3A95E2F79C68922B8A -:100C8000CF70C695C69520E2C29FE0011124C82B03 -:100C9000D92B24C19E01237033278C2F86958695EE -:100CA000C115D34508F0AEC0C1E0D0E002C0CC0F02 -:100CB000DD1F2A95E2F720E2829FC0011124C82B94 -:100CC000D92BDC680BC1C11529E5D20780F4C11509 -:100CD00088E5D80708F0AAC0C11596E5D90708F03D -:100CE000B6C0CF71DD27DC2FCC27D062F7C0CE0194 -:100CF000C1152AE5D20708F49EC09056811590428E -:100D000008F0A5C08D2F8F710E94EE07DD27D062FD -:100D10008F719BC0C53AD10509F49CC0C63AD10574 -:100D200009F09BC0C2E8D0E4D9C0C83AD10509F4A3 -:100D300097C0C93AD10509F496C0CA3AD10509F459 -:100D400095C0CB3AD10509F494C0CC3AD10509F449 -:100D500093C0CB3BD10509F492C0CC3BD10509F43B -:100D600091C0CD3AD10509F490C0C03BD10509F43A -:100D70008FC0CE3AD10509F48EC0CF3AD10509F41F -:100D80008DC0C13BD10509F48CC0C23BD10509F42B -:100D90008BC0C33BD10509F48AC0C43BD10509F41B -:100DA00089C0C53BD10509F488C0C63BD10509F40B -:100DB00087C0C73BD10509F486C0C83BD10509F4FB -:100DC00085C0C93BD10509F484C0CA3BD10509F4EB -:100DD00083C0C0E0D4E482C00E94C605EC017EC09E -:100DE000CE019927D3FF03C0EC01D86C77C0EC018A -:100DF000D06C74C0DF70D06A71C0DC2FCC27C16F9B -:100E0000D06A6CC0C1E0D0E002C0CC0FDD1F2A95D3 -:100E1000E2F720E2829FC0011124C82BD92BDA68A7 -:100E20005DC0DC2FCC27C46FD06A58C0DC2FCC2724 -:100E3000C06FD06A53C024E0969587952A95E1F754 -:100E40008F70CF70C06ED0E0D06AD82B47C0C0E0A2 -:100E5000D0E044C0C1E8D0E441C0C3E8D0E43EC023 -:100E6000C2EED4E43BC0C9EED4E438C0CAEED4E448 -:100E700035C0C5EBD4E432C0C6EBD4E42FC0C3EB1D -:100E8000D4E42CC0C4EBD4E429C0C7EBD4E426C01E -:100E9000CCECD4E423C0CDECD4E420C0C3E8D5E44A -:100EA0001DC0CAE8D5E41AC0C2E9D5E417C0C4E938 -:100EB000D5E414C0C1E2D6E411C0C3E2D6E40EC04A -:100EC000C4E2D6E40BC0C5E2D6E408C0C6E2D6E46C -:100ED00005C0C7E2D6E402C0CAE2D6E4CE01DF9183 -:100EE000CF9108958238910549F1B0F4813391058D -:100EF00009F459C048F48932910509F44FC08A3287 -:100F0000910509F455C008958533910509F441C050 -:100F10008933910599F00895833E910531F138F4B4 -:100F2000803E910591F0823E9105A9F00895863E9C -:100F3000910501F1873E910539F108952091530201 -:100F400020FD3BC021FD39C008958091530280FFF0 -:100F500034C089E341C08091530282FF30C0809148 -:100F6000530284FD2EC083EE37C08091530282FD70 -:100F700026C0F5CF8091530283FF25C08091530294 -:100F800084FD1FC087EE28C08091530283FD1BC0E3 -:100F9000F5CF8091530285FD18C019C0809153028E -:100FA00085FD15C012C08091530286FD12C013C08A -:100FB0008091530286FD0FC00CC080EE0DC082EE02 -:100FC0000BC080E009C086EE07C089E205C085E35A -:100FD00003C08AE201C081E390E00895909153023A -:100FE00092FF0DC0282F2871283019F4877F846064 -:100FF00006C0282F2471243011F48B7F886093FF62 -:101000000DC0282F2871283119F4877E846106C00D -:10101000282F2471243111F48B7E886194FD877E02 -:10102000089508950F931F93CF93FB0122812111FF -:1010300002C0C1E041C08C01C0915601C11125C060 -:1010400086319C45B1F70E94110881E080935601DA -:101050000E943F1D909355018093540110924901C5 -:1010600010924B0110924A0110924D0110924C01C6 -:1010700010924F0110924E011092510110925001A6 -:10108000109253011092520117C080915401909117 -:1010900055010E944B1D8C32914058F690914901A8 -:1010A000E92FF0E0EE0FFF1FE65BFE4F1183008398 -:1010B0009F5F90934901C0E08C2FCF911F910F91BA -:1010C00008950C94E8020C94E902CF93DF93AAE20E -:1010D000B1E04DE251E061E070E08D91E82FE295E2 -:1010E000EF70F0E021A18F70EB0102C0CC0FDD1F8B -:1010F0008A95E2F7CE019C2F9095922391A392A11D -:10110000892B82A34A175B0741F7A0E2B1E04AE2CC -:1011100051E061E070E08D91E82FE295EF70F0E032 -:1011200021A18F70EB0102C0CC0FDD1F8A95E2F781 -:10113000CE019C2F9095922391A392A1892B82A3FB -:101140004A175B0741F710925E0110925D01109201 -:101150005801109257011092600110925F01109295 -:101160005A0110925901109262011092610110927D -:101170005C0110925B01DF91CF910C94F0022F92F1 -:101180003F924F925F926F927F928F929F92AF9217 -:10119000BF92CF92DF92EF92FF920F931F93CF9364 -:1011A000DF932AE2E22E21E0F22EC7E5D1E03DE511 -:1011B000832E31E0932E01E010E066246394BE019B -:1011C000A880B98019821882D7018D917D01E82FFE -:1011D000E295EF70F0E021A18F70A80102C0440FEA -:1011E000551F8A95E2F7CA01242B21A322A1742E50 -:1011F0007094272122A350EA5A95F1F790E2292E04 -:1012000091E0392E20E030E0D1015D901D01452DA7 -:1012100042954F7050E0DA0190964C90C880D9808A -:10122000552D5F70D80102C0AA0FBB1F5A95E2F777 -:10123000AD01442141F4A801022E02C0440F551F04 -:101240000A94E2F702C040E050E04C295D2959833E -:1012500048832F5F3F4F2A303105B1F691A17922A3 -:1012600071A292A1892B82A32296FB018081918198 -:10127000A816B90641F0609263010E943F1D909349 -:101280006501809364018C169D0609F098CF8091CA -:101290006301882311F180916401909165010E949E -:1012A0004B1D0697D0F08091570190915801909373 -:1012B0005E0180935D018091590190915A01909354 -:1012C000600180935F0180915B0190915C0190933C -:1012D000620180936101109263010E94F20281E039 -:1012E000DF91CF911F910F91FF90EF90DF90CF9002 -:1012F000BF90AF909F908F907F906F905F904F9036 -:101300003F902F900895E82FF0E0EE0FFF1FE35A73 -:10131000FE4F8081918108950895EF92FF920F937F -:101320001F93CF93DF93E901662309F44BC0242F69 -:1013300030E0EFEFF0E0E61BF109B901E69F900124 -:10134000E79F300DF69F300D1124232F8B01031BD7 -:1013500011095CE3E52EF12CB7010E94BB2BFB01C8 -:10136000BC01069FC001079F900D169F900D112490 -:10137000B7010E94BB2BE230F105B1F040F4309789 -:1013800079F0319711F5832F242F461B21C0E430CB -:10139000F105A1F068F03597C1F4842F861B18C0C1 -:1013A000832F262F230F14C0862F830FE42F03C013 -:1013B000E42FE61B842F432F2E2F0AC0842F462FA5 -:1013C000430F06C0842F242F03C080E020E040E0BC -:1013D000E42FF0E0E456FD4F4491E22FF0E0E456B4 -:1013E000FD4F9491E82FF0E0E456FD4FE4914983DE -:1013F0009883EA83DF91CF911F910F91FF90EF9037 -:10140000089588E090E00C94FE2BAB01BC0188E0CD -:1014100090E00C941C2CE9E3F2E083E080831092CE -:101420003A028FEF8283838314826081718182818B -:1014300093810C94050A6091390260FF06C066959D -:101440006F7370E080E090E0089560E070E0CB01A1 -:10145000089580913D0290E001968430910514F04A -:1014600083E090E080933D026091390270913A02EE -:1014700080913B0290913C020C94050A80913D02C0 -:1014800090E0019797FF02C080E090E084309105E2 -:1014900014F083E090E080933D02609139027091F6 -:1014A0003A0280913B0290913C020C94050A809193 -:1014B000390280FF06C065E070E08EE392E00C9494 -:1014C0001910EEE3F2E0118210821282339682E06C -:1014D000ED34F807C1F7EFCF9091390290FF0CC0BF -:1014E000EEE3F2E0818360834283339692E0ED3451 -:1014F000F907C1F70C94570A0895CF93DF9300D0F2 -:101500001F92CDB7DEB72091390220FF0AC09E019D -:101510002F5F3F4F0E948D094B8169818A810E9414 -:101520006C0A0F900F900F90DF91CF9108955F920A -:101530006F927F928F929F92AF92BF92CF92DF92E3 -:10154000EF92FF920F931F93CF93DF9300D01F92E0 -:10155000CDB7DEB78C01E62EF42E522E80913902E3 -:1015600080FF89C0982F9E77923061F49E012F5F93 -:101570003F4FC8010E948D094B8169818A810E9479 -:101580006C0A59C0E82FE695EF739EE39E0F9F7398 -:10159000943018F4F0903C024EC09AE39E0F9F7373 -:1015A000993068F4881F8827881F90913A02292F64 -:1015B000220F022F082B97FB112710F93CC087E25E -:1015C0008E0F8F738A30B8F5F0E07997E0FD02C096 -:1015D00021E001C02FEFEE7FEE56FD4F85919491F3 -:1015E00065E070E00E94BB2B26034001279F900C12 -:1015F0001124580188E9A81A8EEFB80A8EE3C82E84 -:1016000082E0D82E98E6692E77247394C501B30141 -:101610000E94BB2B96014F2D6E2D0E948D09A80CA8 -:10162000B91C83E0C80ED11C8DE4C81682E0D80630 -:1016300069F70E94570A8091390200FB87F980936D -:101640003902902F969580913A028078892B10FB71 -:1016500087F980933A02E0923B02F0923C025520D7 -:1016600051F06091390270913A0280913B02909161 -:101670003C020E94050A0F900F900F90DF91CF91CE -:101680001F910F91FF90EF90DF90CF90BF90AF90A0 -:101690009F908F907F906F905F90089521E00C94C1 -:1016A000970AE9E3F2E02081221F2227221F3091CE -:1016B0003A02432F440F842F822B37FB992790F94E -:1016C000089668E671E00E94CF2B438162810C94FA -:1016D0004E0B20913902221F2227221F30913A02FD -:1016E000432F440F842F822B37FB992790F98830A2 -:1016F00091051CF4805A9E4F05C0089768E671E07A -:101700000E94CF2B40913C0260913B020C944E0B07 -:1017100060913B02862F90E0883F910514F4685F4A -:1017200001C06FEF80913902881F8827881F909130 -:101730003A02292F220F97FB992790F940913C02FA -:10174000822B0C944E0B60913B02862F90E0089701 -:1017500014F0685001C060E080913902881F88272A -:10176000881F90913A02292F220F97FB992790F911 -:1017700040913C02822B0C944E0B40913C02842FF2 -:1017800090E0883F910514F4485F01C04FEF8091CD -:101790003902881F8827881F90913A02292F220F2B -:1017A00097FB992790F960913B02822B0C944E0B8A -:1017B00040913C02842F90E0089714F0485001C0FB -:1017C00040E080913902881F8827881F90913A0253 -:1017D000292F220F97FB992790F960913B02822BCA -:1017E0000C944E0B20E00C94970ACF939091390201 -:1017F00090FF40C09178811102C0926007C085328D -:1018000010F0986403C08F73880F982B909339025F -:10181000662351F06091390270913A0280913B0247 -:1018200090913C020E94050AC09139026C2F669586 -:101830006F7370E04BE050E082E091E00E94E92B92 -:10184000892B19F01092830103C081E080938301FA -:10185000CC1FCC27CC1F90913A02892F880F97FB81 -:10186000992790F940913C0260913B028C2BCF91DB -:101870000C94F20BCF91089561E00C94F50B8091DC -:10188000390286958F738F5F853208F081E00C9462 -:101890003C0C8091390286958F73815009F484E263 -:1018A0000C943C0CE9E3F2E08081816080838695B2 -:1018B0008F730C943C0C60E00C94F50B80910B0240 -:1018C000816080930B020E94141C811104C00E944D -:1018D000F31B0E940B0A0E94010A60933902709365 -:1018E0003A0280933B0290933C026E7761F40E942F -:1018F0000B0A0E94010A6093390270933A028093A6 -:101900003B0290933C0281E08093830180913902F5 -:1019100080FF04C086958F730C945B0C08959091A2 -:10192000390290FF10C0253070F430E0F901EE0F5D -:10193000FF1F2E0F3F1FF901E25CFD4F8183608383 -:1019400042830C94570A08951F93CF93DF9300D0DE -:101950001F92CDB7DEB73091390230FF0CC0122F85 -:101960009E012F5F3F4F0E948D09212F4B8169817E -:101970008A810E948F0C0F900F900F90DF91CF9172 -:101980001F910895E9E3F2E080818E7F808360817A -:101990007181828193810E94050A109283012FEF49 -:1019A00080E792E0215080409040E1F700C00000C5 -:1019B0000C94570A8091390280FD0C94C20C0C944F -:1019C000520CCF93C82F80918101909182010E9487 -:1019D0004B1DEC2FF0E0E257FD4FE491F0E08E1745 -:1019E0009F0708F443C00E943F1D9093820180939B -:1019F00081016091800170E080E090E00E94BC294C -:101A000020E030E04FE753E40E94DF282BED3FE079 -:101A100049E450E40E94E52A0E94522B0E94592971 -:101A20002BE43AE34EE25FE30E94722820EF3BEFA3 -:101A300048ED52E40E94E52A0E948B29462F8091AE -:101A40003902881F8827881F90913A02292F220F78 -:101A500097FB992790F960913B02822B0E947D0AA7 -:101A60008091800190E0019680938001CF9108954C -:101A7000CF93C82F80917E0190917F010E944B1DD2 -:101A8000EC2FF0E0E557FD4FE491F0E08E179F0753 -:101A9000E8F00E943F1D90937F0180937E0140916A -:101AA0003C0260913B0280917C0190917D010E94FB -:101AB0007D0A80917C0190917D01019668E671E03C -:101AC0000E94BB2B90937D0180937C01CF91089560 -:101AD000CF92DF92FF920F931F93CF93DF93F82E55 -:101AE00080917A0190917B010E944B1DEF2DE6952C -:101AF000F0E0E857FD4FE491F0E08E179F07C0F14A -:101B00000E943F1D90937B0180937A010EE312E0C7 -:101B1000C0E0D0E088E6C82EDD24D394809178011F -:101B2000909179018C0F9D1FB6010E94BB2B9801EB -:101B300040913C0260913B020E948D09C85BDF4FDF -:101B40000D5F1F4FC83681E0D80741F70E94570A42 -:101B50008091780190917901F0FE05C00196BE0157 -:101B60000E94BB2B01C0019790937901809378016B -:101B7000DF91CF911F910F91FF90DF90CF9008954B -:101B8000CF92DF92EF92FF920F931F93CF93DF9349 -:101B9000C82F80FF02C01FEF01C011E080917601C5 -:101BA000909177010E944B1DC695EC2FF0E0EB570A -:101BB000FD4FE491F0E08E179F0708F45BC00E9490 -:101BC0003F1D90937701809376012EE3E22E22E071 -:101BD000F22EC0E0D0E0F70111821082128294E070 -:101BE000C92ED12C00E080917501800F87FD8B5F9D -:101BF000082E000C990BC817D907E9F480913C0214 -:101C00008C9DA0018D9D500D11245595479555959E -:101C1000479580913902881F8827881F90913A0242 -:101C2000592F550F97FB992790F9970160913B0227 -:101C3000852B0E948D09010FF1E0CF1AD10899F68A -:101C4000219683E0E80EF11CC530D10521F60E94F3 -:101C5000570A80917501113031F4811102C084E07E -:101C600007C0815005C090E00196BE010E94CF2BB5 -:101C700080937501DF91CF911F910F91FF90EF90AD -:101C8000DF90CF9008950F931F93CF93DF93C82FCA -:101C900080917301909174010E944B1DEC2FF0E034 -:101CA000EE57FD4FE491F0E08E179F0708F456C001 -:101CB0000E943F1D9093740180937301CEE3D2E0A4 -:101CC000FE01118210821282339682E0ED34F80711 -:101CD000C1F700E010E080917201082E000C990B12 -:101CE00008171907ECF080910101082E000C990BE0 -:101CF00080179107ACF080913902881F8827881FD0 -:101D000090913A02592F550F97FB992790F99E0110 -:101D100040913C0260913B02852B0E948D0903C0DB -:101D2000198218821A820F5F1F4F23960530110502 -:101D300091F60E94570A8091000190917201980FCC -:101D40009093720120910101280F20930101121636 -:101D500014F494301CF0819580930001DF91CF91B1 -:101D60001F910F910895EF92FF920F931F93CF93BE -:101D7000DF9380917001909171010E944B1D883E0C -:101D80009340D0F10E943F1D9093710180937001A8 -:101D9000C0916E01D0916F012196C170DD27D09363 -:101DA0006F01C0936E018EE3E82E82E0F82E10E002 -:101DB00008E7812F8695FE01E80FF11DCF018170A4 -:101DC0009927970140913C0260913B02FC010E9FD4 -:101DD000C0010F9F900D11240E948D091F5FF3E039 -:101DE000EF0EF11C153029F7DF91CF911F910F9164 -:101DF000FF90EF900C94570ADF91CF911F910F91B4 -:101E0000FF90EF900895CF93DF9300D01F92CDB74E -:101E1000DEB780916C0190916D010E944B1DE0E84E -:101E2000F2E02591349182179307C0F180916B0104 -:101E300081110CC09E012F5F3F4F4FEF6FEF80E08D -:101E400090E00E948D098A8180936B010E943F1D62 -:101E500090936D0180936C0180916A01813051F003 -:101E600028F0823061F440916B010AC080916B01CF -:101E700040E007C060916B0140E080E003C040E0BB -:101E800080E060E00E946C0A80916A0190E0019617 -:101E900063E070E00E94CF2B80936A010F900F9057 -:101EA0000F90DF91CF910895CF93DF9380916801D8 -:101EB000909169010E944B1D843F914008F444C0F9 -:101EC0000E943F1D9093690180936801C0E0D0E0BB -:101ED00020916601309167018091390290913A0218 -:101EE000C230D1051CF4232B79F002C0232B61F4FE -:101EF000881F8827881F392F330F97FB992790F960 -:101F00002C2F40913C020AC0881F8827881F392F38 -:101F1000330F97FB992790F92C2F40E060913B02FB -:101F2000832B0E94A40C2196C530D10589F60E940E -:101F3000570A8091660190916701019681709927F7 -:101F40009093670180936601DF91CF91089580910E -:101F500083018823D9F190913902892F86958F7357 -:101F60002EE3280F2F73243018F482500C94E10CC8 -:101F70002AE3280F2F73233018F486500C94380D61 -:101F800027E3280F2F73263018F489500C94680D1E -:101F900021E3280F2F73263018F48F500C94C00DB6 -:101FA0002BE2280F2F73233018F485510C94430E25 -:101FB000892F8E77803311F40C94B30E863411F48C -:101FC0000C94030F883411F40C94540F089521B32A -:101FD000342F3095232331B3432B3FB7F894FC01C2 -:101FE000680F791FE617F70789F0819198E041BBE8 -:101FF000000000C087FF21BB880F000000C000C0A8 -:1020000000C021BB00C09A9591F7ECCF3FBF089567 -:1020100020B3242B20BB9B01220F331F620F731FA1 -:102020000E94E70F87EC90E00197F1F700C00000F5 -:10203000089540E10C9408109093890180938801E1 -:102040000895E0918801F0918901309721F0019085 -:10205000F081E02D099480E00895E0918801F091ED -:102060008901309721F00280F381E02D09940895D1 -:10207000E0918801F0918901309721F00480F58189 -:10208000E02D099408952091860130918701281749 -:10209000390771F09093870180938601E091880160 -:1020A000F0918901309721F00680F781E02D0994A5 -:1020B000089520918401309185012817390771F026 -:1020C0009093850180938401E0918801F0918901CA -:1020D000309721F00084F185E02D0994089508954A -:1020E0000C946F1081E008950E94361D85B78068BA -:1020F00085BF85B7806885BF0E9465080E94F81D6E -:102100000C945E0C5F926F927F928F929F92AF922F -:10211000BF92CF92DF92EF92FF920F931F93CF93D4 -:10212000DF93CDB7DEB72A970FB6F894DEBF0FBEA8 -:10213000CDBF0E94BF080E947210811111C08FEFA5 -:1021400089838A831B820E943F1D8160782F9D8333 -:102150008C8349815A816B818D810E943F1156C0C9 -:102160009BE8692E91E0792E00E010E088248394AA -:10217000912C502E802F0E9483096C01F301A190B5 -:10218000B1903F01A826B926A114B10431F40F5F24 -:102190001F4F0330110569F7D2CF80910B0281FDEB -:1021A0000E948C0980E090E07401082E02C0EE0CC1 -:1021B000FF1C0A94E2F795012E213F21232B09F100 -:1021C0008E835F82CE20DF2081E0CD2809F480E07D -:1021D00088870E943F1D8160782F9A8789874E816A -:1021E0005F8168858A850E943F11000F111FF801E9 -:1021F000E557FE4F80819181E826F926F182E08241 -:1022000005C001968A30910579F6C1CF0E949B20C6 -:102210000E94211090918A018917D9F00E94211003 -:1022200080938A012A960FB6F894DEBF0FBECDBF09 -:10223000DF91CF911F910F91FF90EF90DF90CF90A2 -:10224000BF90AF909F908F907F906F905F900C9415 -:10225000F7022A960FB6F894DEBF0FBECDBFDF910E -:10226000CF911F910F91FF90EF90DF90CF90BF9093 -:10227000AF909F908F907F906F905F900895CF93D5 -:10228000DF93CDB7DEB72B970FB6F894DEBF0FBE46 -:10229000CDBF4F83588769877A878B87DE01119678 -:1022A00086E0FD0111928A95E9F785E0FE013796F7 -:1022B00001900D928A95E1F749815A816B817C8169 -:1022C0008D819E810E9456182B960FB6F894DEBF22 -:1022D0000FBECDBFDF91CF910895FC018081918128 -:1022E0000E94251B0895882309F4F8C08238C1F4A0 -:1022F0000E94211081FDF2C069E380910D0190914F -:102300000E010E94971C0E94841B2FEF81EE94E027 -:10231000215080409040E1F700C0000069E319C0FF -:102320008338F9F40E94211080FDD8C063E58091C4 -:102330000D0190910E010E94971C0E94841B2FEFAB -:1023400081EE94E0215080409040E1F700C0000011 -:1023500063E580910D0190910E010E94A21C0C94E6 -:10236000841B8438C1F40E94211082FDB7C067E449 -:1023700080910D0190910E010E94971C0E94841B78 -:102380002FEF81EE94E0215080409040E1F700C0B3 -:10239000000067E4DECF9CEF980F913A40F4682F7D -:1023A00080910D0190910E010E94971CD8CF90E270 -:1023B000980F983050F4877091E001C0990F8A957A -:1023C000EAF7892F0E94BA1BCACF9BE5980F93307A -:1023D00070F4853A29F0863A31F083E890E005C040 -:1023E00081E890E002C082E890E00C94431098E508 -:1023F000980F953108F06EC0883A61F1893A69F119 -:102400008A3A71F18B3A79F18C3A81F18B3B89F1FF -:102410008C3B91F18D3A99F1803BA1F18E3AA9F173 -:102420008F3AB1F1813BB9F1823BC1F1833BC9F1F4 -:10243000843BD1F1853BD9F1863BE1F1873BE9F162 -:10244000883BF1F1893BF9F18A3B09F43FC080E018 -:1024500090E03EC082EE90E03BC089EE90E038C054 -:102460008AEE90E035C085EB90E032C086EB90E0DC -:102470002FC083EB90E02CC084EB90E029C087EB69 -:1024800090E026C08CEC90E023C08DEC90E020C062 -:1024900083E891E01DC08AE891E01AC082E991E0EA -:1024A00017C084E991E014C081E292E011C083E298 -:1024B00092E00EC084E292E00BC085E292E008C098 -:1024C00086E292E005C087E292E002C08AE292E0F2 -:1024D0000C945910803F10F00C94A31F089588238A -:1024E00009F462C0823879F40E94211081FF5CC037 -:1024F00069E380910D0190910E010E94971C0E944A -:10250000841B69E310C08338B1F40E94211080FF5E -:102510004BC063E580910D0190910E010E94971CC4 -:102520000E94841B63E580910D0190910E010E9431 -:10253000A21C0C94841B843879F40E94211082FF21 -:1025400033C067E480910D0190910E010E94971CA9 -:102550000E94841B67E4E7CF9CEF980F913A10F438 -:10256000682FE1CF90E2980F983050F4877091E097 -:1025700001C0990F8A95EAF7892F0E94C01BD9CF15 -:102580009BE5980F933020F480E090E00C9443108A -:1025900098E5980F953120F480E090E00C94591064 -:1025A000803F10F00C940B200895882321F00E94A6 -:1025B000BA1B0C94841B0895882321F00E94C01B31 -:1025C0000C94841B08958F929F92AF92BF92DF92DA -:1025D000EF92FF920F931F93CF93DF937C01D62F3F -:1025E000C72FFC01058102950F70128111110E9405 -:1025F000D71B0E947D1B882379F0112369F080E2AC -:102600008D0F883048F082E00E94661B0E947D1B7F -:1026100091E0D82ED92601C0D12CBC2EB2948FE0E7 -:10262000B8228B2D90E0FC01E859FF4F0C94E32B6E -:102630008C2F807FCF70882311F0C295C07F11232B -:1026400099F0CC2309F4C3C180E28D0F883010F0DB -:10265000D11104C08C2F0E94BA1B03C08C2F0E9482 -:10266000CA1B0E94841BB3C18D2F0E946F12CC2302 -:1026700009F4D2C180E28D0F883010F0D11104C06E -:102680008C2F0E94C01B03C08C2F0E94D01B0E9465 -:10269000841BC2C18C2F807FCF70803211F0C29515 -:1026A000C07FDD2319F0D130C9F022C0112371F0B1 -:1026B000002341F0013031F40E94F01B8C2B0E946A -:1026C000EA1BAAC10E94F01B8C2B3AC1002319F00F -:1026D000013009F4A1C10E94ED1B18C0112321F0A3 -:1026E000063008F099C10EC0053008F095C10EC043 -:1026F000112351F0002331F0F701858180FF67C17C -:102700008F7085838C2F1CC1011172C18C2F1EC14B -:102710008C2F86958695837019F0813061F07CC18D -:10272000112321F08D2F9C2F937002C080E090E048 -:102730000E9443107EC1112321F08D2F9C2F937096 -:1027400002C080E090E00E94591073C11123F9F09B -:10275000D53F51F0D63F71F0D43FA9F480914D029E -:1027600090914E0281600BC080914D0290914E027B -:10277000826005C080914D0290914E0284609093DA -:102780004E0280934D028D2F0E94A31F1EC0D53F85 -:1027900051F0D63F71F0D43FA9F480914D02909151 -:1027A0004E028E7F0BC080914D0290914E028D7F24 -:1027B00005C080914D0290914E028B7F90934E0206 -:1027C00080934D028D2F0E940B200E94902031C1DA -:1027D0008C2F837009F04CC0111127C12D2F229529 -:1027E00026952770220F220F6D2F6F70862F90E095 -:1027F000A0E0B0E04C015D01022E04C0880C991CE1 -:10280000AA1CBB1C0A94D2F7D4FF12C08FE090E040 -:10281000A0E0B0E004C0880F991FAA1FBB1F2A9533 -:10282000D2F7BC01CD01609570958095909503C05D -:1028300060E070E0CB01C695C695C370C23051F020 -:1028400080F4682979298A299B29C13071F00E9476 -:10285000A519EBC0682979298A299B290E94B719F3 -:10286000E4C00E94A519C501B4010E949319DDC0FE -:10287000112319F08C2F817001C08695882309F4EB -:10288000D4C02D2F229526952770220F220F6D2F51 -:102890006F70862F90E0A0E0B0E04C015D01022E49 -:1028A00004C0880C991CAA1CBB1C0A94D2F7D4FF44 -:1028B00012C08FE090E0A0E0B0E004C0880F991F44 -:1028C000AA1FBB1F2A95D2F7BC01CD016095709558 -:1028D0008095909503C060E070E0CB01C695C695E9 -:1028E000C370C23051F080F4682979298A299B2964 -:1028F000C13071F00E946A1A98C0682979298A2922 -:102900009B290E947C1A91C00E946A1AC501B401D9 -:102910000E94581A8AC08D2F90E0FC01E05EF109F8 -:10292000E531F10508F04FC0E858FF4F0C94E32B58 -:10293000DF708C2F8F71112331F00E94F1198D2FD0 -:102940000E94D51269C00E94121A8D2F0E94DC12BB -:1029500063C0112341F0053008F05EC08C2F8F71E9 -:102960000E94371A59C0063008F056C0F7CF11231D -:1029700039F08C2F8F710E94F1194EC01123C9F3C9 -:102980008C2F8F710E94121A47C0112329F08C2FAF -:102990008F710E94DC1940C00E94D7193DC01123DD -:1029A00049F0CF718C2F0E94F11963E08C2F0E94A7 -:1029B0005D1B32C081E00E94661B023068F182E03C -:1029C0000E94661B29C0112331F0002391F28D2F44 -:1029D0000E94731121C0002399F2D93349F4FFEF0B -:1029E00027EE83E0F15020408040E1F700C0000076 -:1029F0008D2F0E946F1210C04C2F4F706D2FC7018A -:102A00000E94AF050E94041914C04C2F4F706D2F07 -:102A1000C7010E94B2050DC098E0B91631F0B91691 -:102A200040F086EF8B0D823020F40E9421100E942E -:102A3000F702DD20E1F00E94591B80FD18C0F7016C -:102A400012820E94531B0E94F119C7010E94431574 -:102A50000E94531BDF91CF911F910F91FF90EF9038 -:102A6000DF90BF90AF909F908F900C94121ADF91DF -:102A7000CF911F910F91FF90EF90DF90BF90AF909B -:102A80009F908F9008950F931F93CF93DF93EC0146 -:102A9000988189812B813C81232B31F08F3F31F448 -:102AA00081E09F3F19F403C081E001C080E080FD18 -:102AB00013C0CE010E940F03882371F068817981D1 -:102AC0008A810E94301B8C010E948E1A0E948119FB -:102AD000B801CE010E94E312DF91CF911F910F91B7 -:102AE00008950E94D71B0E94E71B80910D019091D1 -:102AF0000E010E94AD1C0E94841B0E9432210E9484 -:102B0000902080E090E00E94431080E090E00C94E0 -:102B100059100E94C71B0C9471150E94251BE92FA8 -:102B2000E295EF704E2F50E0FA013297EE30F1054A -:102B3000B0F4E357FF4F0C94E32B803F91F018F46F -:102B4000803E68F40EC0843F51F40BC0803E48F0D4 -:102B5000813F29F406C093FB882780F9089580E01F -:102B6000089581E00895CF93DF9300D000D01F92A5 -:102B7000CDB7DEB70F900F900F900F900F90DF91B1 -:102B8000CF910895CF93DF9300D000D000D0CDB780 -:102B9000DEB726960FB6F894DEBF0FBECDBFDF912D -:102BA000CF9108951F93CF93DF93C091920116E0C8 -:102BB00080919301C81799F0D0E01C9FF0011D9FF0 -:102BC000F00D1124EC56FE4F4081518162817381DA -:102BD000848195810E94C2152196C770E9CFDF914B -:102BE000CF911F9108954091C4015091C50160910A -:102BF000C6017091C7018091C8019091C9010C94E0 -:102C0000C215CF938091C90182958F7009F05FC082 -:102C10008091C601882309F45AC080919201B09135 -:102C200093017091C401A091C5014091C7015091D9 -:102C3000C80191E07F3F09F090E0692FC6E08B1753 -:102C400009F445C04115510521F0AF3F21F020E0C6 -:102C500003C021E001C0262F90E020FD35C0C89FB1 -:102C6000F001C99FF00D1124EC56FE4F21812A136B -:102C70002BC02081271328C02281211125C0238148 -:102C800034812417350710F421503109241B350BEA -:102C9000283C3105C8F42091C9012F702061209390 -:102CA000C90126E0289FF001299FF00D1124E75665 -:102CB000FE4F80818F708061808384EC91E00E9460 -:102CC0004315CF910C94D21501968770B8CFCF9150 -:102CD0000895AF92BF92CF92DF92EF92FF920F933F -:102CE0001F93CF93DF93CDB7DEB761970FB6F894FC -:102CF000DEBF0FBECDBF8C0185E0F801DE011D9661 -:102D000001900D928A95E1F7D8014C9111965C9152 -:102D100011971296EC903091C4016091C501809199 -:102D2000C7019091C801009731F06F3F31F421E065 -:102D30003F3F19F403C021E001C020E0B22FB17081 -:102D4000BB2E20FD60C1F801C380D480A090C601D5 -:102D5000AA2009F4EEC02091C901C816D90628F0AE -:102D6000D601A81BB90BCD0104C0809590958C0DA0 -:102D70009D1DFF24F394883C910580F0F12C207F69 -:102D800009F09CC07C2DD98AC88A6E2D89890E9441 -:102D9000B31584EC91E00E9443152DC1822F807FF2 -:102DA00009F054C0561314C0431312C0FE2CE11096 -:102DB0000FC02F7020612093C9010E94F31584EC8D -:102DC00091E00E9443158091C901F80185835CC19F -:102DD000CD2831F05F3F31F481E04F3F19F403C05B -:102DE00081E001C080E080FD03C081E08E2502C04B -:102DF00080E090E0F82FF170FF2E80FF1CC08091E2 -:102E000092012091930136E0821709F41AC190E0F3 -:102E1000389FF001399FF00D1124EC56FE4F61816F -:102E2000561306C06081461303C06281E61203C0D8 -:102E300001968770E9CFFE2CEE2009F425C1809120 -:102E4000C90181608093C901F12C1EC1561309C0CC -:102E5000431307C0E11005C08091C901F8018583C3 -:102E6000A4C04D875E878D859E850E948D15882321 -:102E700079F1EE2069F12091C901822F82958F703E -:102E800090E0029774F08091C4019091C5019887F9 -:102E90008F831986DB86CA862C87CE0107960E940F -:102EA000431586E0F801A4ECB1E001900D928A95FB -:102EB000E1F70E9401160E94F3150DC0561771F03C -:102EC0004D875E878D859E850E948D1581111AC064 -:102ED000C8010E944315FF24F394D6C04313F0CFDA -:102EE000E110EECF8091C901F8018583C8010E94ED -:102EF000431586E0E4ECF1E0DF011D928A95E9F7E5 -:102F0000FA2CC2C0EE2021F32091C901822F8295B4 -:102F10008F7090E002972CF28091C4019091C501CE -:102F20009A8389831B82DD82CC822E83CE01019617 -:102F3000B6CFC816D90628F0F601E81BF90BCF0169 -:102F400004C0809590958C0D9D1D883C910548F09E -:102F5000F12C7C2DD98AC88A6E2D89890E94B315DF -:102F60004AC0FE2CEE2009F4B3CF561333C04313EE -:102F700031C02091C90120FD24C0822F82958F701D -:102F8000482F50E041155105E1F0D80115962C93DA -:102F900015974F30510549F08F5F982F9295907F8C -:102FA000822F8F70892B15968C93C8010E94431530 -:102FB00086E0F801A4ECB1E001900D928A95E1F76A -:102FC0003DC086E0F801A4ECB1E001900D928A9535 -:102FD000E1F75AC04D875E878D859E850E948D15CD -:102FE00081115FCF8091C90181608093C901C801BF -:102FF0000E94431549C0E4ECF1E086E0DF011D9238 -:103000008A95E9F71BC0EE2009F462CF4D875E87F1 -:103010008D859E850E948D15F82E882309F458CF42 -:1030200086E0F801A4ECB1E001900D928A95E1F7F9 -:1030300084EC91E00E946D110E9401160E94F3152C -:1030400023C04D875E878D859E850E94251B292F75 -:1030500022952F70223028F49F7039F0811105C01D -:103060000BC0243028F49F7049F4805E883020F033 -:10307000C8010E944315BF2CFB2C06C0D801159631 -:103080009C91907F91F7F8CF8F2D61960FB6F894B1 -:10309000DEBF0FBECDBFDF91CF911F910F91FF908B -:1030A000EF90DF90CF90BF90AF9008951F93CF9394 -:1030B000DF93CDB7DEB72C970FB6F894DEBF0FBE07 -:1030C000CDBF4F83588769877A878B879C87CE01CE -:1030D00007960E9469168823D1F09F8188852A85EA -:1030E0003B85232B31F08F3F31F481E09F3F19F472 -:1030F00003C081E001C080E080FD47C04F8158855A -:1031000069857A858B859C850E94C2153EC086E0C4 -:10311000FE013796DE01119601900D928A95E1F736 -:10312000FF81E8856A857B856115710531F0EF3F88 -:1031300031F481E0FF3F19F403C081E001C080E079 -:1031400080FD23C02091930130E0C9010196877072 -:1031500099274091920150E084179507F1F1F98386 -:10316000EA837D836C8396E0929FD001939FB00D9C -:103170001124AC56BE4FFE01319601900D929A95E6 -:10318000E1F7809393010E94D21516E0809192019D -:1031900090919301891771F1189FC00111248C56E9 -:1031A0009E4F0E946916882329F1E09192011E9F8B -:1031B000F0011124EC56FE4F4081518162817381F0 -:1031C000848195810E94C2158091920190E00196C0 -:1031D0008770992780939201D9CF0E948915109208 -:1031E000930110929201E4ECF1E086E0DF011D9280 -:1031F0008A95E9F72C960FB6F894DEBF0FBECDBFC7 -:10320000DF91CF911F910895EF92FF920F931F933B -:10321000CF93DF938C01892B09F46CC0F12CEE2441 -:10322000E394E8012196F8018491843740F48430D6 -:1032300008F051C0813081F0823019F15BC08537D0 -:1032400009F444C0A8F19CE7980F903708F052C0E9 -:103250008F770E946F1241C00E5F1F4FFE01849155 -:1032600090E2980F983050F48770FE2D01C0FF0F48 -:103270008A95EAF78F2F0E94DA1B14C00E947311FF -:103280002DC00E5F1F4FFE01849190E2980F983081 -:1032900060F48770FE2D01C0FF0F8A95EAF78F2F2B -:1032A0000E94E01B0E94841B19C00E946F1216C06E -:1032B0000E5F1F4FFE01C491CC2381F08FE99FE088 -:1032C0000197F1F700C00000C150F6CF0E5F1F4F0D -:1032D000FE01F49003C00E9473118E018F2D88238C -:1032E00009F49FCFEFE9FFE03197F1F700C000004C -:1032F0008150F5CFDF91CF911F910F91FF90EF900B -:103300000895089508950C9482190E94831960937A -:10331000E2017093E3018093E4019093E5010C9442 -:1033200071150C9485190F931F930091E201109170 -:10333000E3012091E4013091E501602B712B822B98 -:10334000932B1F910F910C9485190F931F9300914C -:10335000E2011091E3012091E4013091E501602345 -:103360007123822393231F910F910C9485190F933E -:103370001F930091E2011091E3012091E40130914B -:10338000E50160277127822793271F910F910C94E5 -:1033900085190C9482190E94C9196093DE017093FB -:1033A000DF018093E0019093E1010C94711560E0DE -:1033B00070E0CB010C94CB190F931F9341E050E0C8 -:1033C00060E070E08A019B0104C0000F111F221F02 -:1033D000331F8A95D2F7C901B8011F910F910C9440 -:1033E000CB190F931F9341E050E060E070E004C000 -:1033F000440F551F661F771F8A95D2F78091DE0113 -:103400009091DF01A091E001B091E1018A019B015F -:10341000082B192B2A2B3B2BC901B8011F910F91A7 -:103420000C94CB190F931F9341E050E060E070E0E3 -:1034300004C0440F551F661F771F8A95D2F7409529 -:103440005095609570958091DE019091DF01A0917B -:10345000E001B091E1018A019B01082319232A238D -:103460003B23C901B8011F910F910C94CB190F9305 -:103470001F9341E050E060E070E004C0440F551F2E -:10348000661F771F8A95D2F78091DE019091DF0148 -:10349000A091E001B091E1018A019B010827192761 -:1034A0002A273B27C901B8011F910F910C94CB1912 -:1034B0000F931F930091DE011091DF012091E00135 -:1034C0003091E101602B712B822B932B1F910F9177 -:1034D0000C94CB190F931F930091DE011091DF0123 -:1034E0002091E0013091E101602371238223932335 -:1034F0001F910F910C94CB190F931F930091DE0134 -:103500001091DF012091E0013091E10160277127E6 -:10351000822793271F910F910C94CB1908952AE0CD -:10352000929F800D1124E82FE695E695E695877029 -:1035300051E001C0550F8A95EAF785E0E89FF00158 -:103540001124E653FE4F20E030E070E04081CB01D3 -:10355000022E02C0969587950A94E2F781708195B4 -:1035600084278523842781932F5F3F4F25303105A2 -:1035700069F708952AE0929F800D1124682F6695BF -:1035800066956695982F977085E0689FB001112425 -:1035900040E050E080E0FB01E40FF51FE653FE4FF2 -:1035A000208130E0092E02C0369527950A94E2F773 -:1035B00021703327042E01C0220F0A94EAF7822BD0 -:1035C0004F5F5F4F4530510531F70895CF92DF923D -:1035D000EF92FF920F931F93CF93DF938C01C090D4 -:1035E000DE01D090DF01E090E001F090E1018091F8 -:1035F000E2019091E301A091E401B091E501C82AB4 -:10360000D92AEA2AFB2ACFE1D0E0D701C6010C2E45 -:1036100004C0B695A795979587950A94D2F780FD33 -:1036200004C0219790F780E007C0B8018C2F0E945A -:10363000CE050197B1F38C2FDF91CF911F910F91A0 -:10364000FF90EF90DF90CF900895CF93DF93EC0140 -:103650000E94E61ABE010E94CE05DF91CF91089527 -:103660001F93CF93DF93EB0190919101992321F068 -:10367000CB010E94251B13C0882349F0CB010E9477 -:10368000E61A182F682FCE010E948F1A04C0CB01B2 -:103690000E94BA1A182FBE01812F0E94CE05DF9119 -:1036A000CF911F9108958091E60185958595859527 -:1036B00008958091E6018770089598E0899F9001B0 -:1036C0001124262B2093E6010C94F1192091E60198 -:1036D000809582238093E601982F977069F430E0FB -:1036E000482F082E000C550B2417350729F0859517 -:1036F000859585950C94121A08959091E60197701E -:1037000081E009F480E00895E0910D01F0910E014F -:1037100080910A028083E0910D01F0910E01908169 -:1037200080910902892B8083E0910D01F0910E01B7 -:10373000908180910802892B80838091E701882302 -:1037400081F0E0910D01F0910E019081892B808331 -:1037500080910D0190910E010E943A1C81111092EE -:10376000E70180910D0190910E010C942D10809134 -:103770000A02089590910A02892B80930A02089503 -:10378000809590910A02892380930A0208951092ED -:103790000A02089590910902892B809309020895E5 -:1037A00080959091090289238093090208951092CF -:1037B0000902089590910802892B809308020895C8 -:1037C00080959091080289238093080208951092B1 -:1037D000080208958093E70108951092E701089583 -:1037E0008091E70108956DEE7EEF80E090E00E9409 -:1037F000282C60E082E090E00E940A2C60E083E0E8 -:1038000090E00E940A2C60E084E090E00E940A2C84 -:1038100060E085E090E00E940A2C40E050E0BA01B0 -:1038200088E090E00C941C2C80E090E00E94042C36 -:1038300021E08D3E9E4F09F020E0822F089582E026 -:1038400090E00C94F62B682F82E090E00C940A2C08 -:1038500083E090E00C94F62B682F83E090E00C94CA -:103860000A2C84E090E00C94F62B682F84E090E022 -:103870000C940A2CFC0131969C01205E3F4F80E0A5 -:10388000919191118F5FE217F307D1F708959C0191 -:10389000FC0132969FEF80E04191461789F09F3FEF -:1038A00019F4411101C0982F8F5F8E31A9F79F3F06 -:1038B00039F0F901E90FF11D97FDFA95628308953A -:1038C00008959C01225E3F4FFC014281461301C0D6 -:1038D0001282019682179307B9F70895262F26952D -:1038E000269526952F3169F0FC01E20FF11D6770D6 -:1038F00021E030E001C0220F6A95EAF78181282B90 -:1039000021830895262F2695269526952F3171F02F -:10391000FC01E20FF11D677021E030E001C0220FD1 -:103920006A95EAF7209581812823218308952091C3 -:103930001F01222329F02091530227FD0C946E1CB5 -:103940000C94471C20911F01222329F0209153023F -:1039500027FD0C94821C0C94611CFC01319680960E -:103960001192E817F907E1F7089508950C94B51C32 -:103970000C94B51CCF930E94B81C0E94BF080E94F3 -:10398000B61CC0E08C2F0E948309892B29F4CF5FDD -:10399000C330C1F780E001C081E0CF9108950C945D -:1039A000B51C0C94CF1C0E94D11C8091590284300C -:1039B00049F110920C0220E488E190E00FB6F894EF -:1039C000A895809360000FBE2093600080E00E9465 -:1039D000F7020E94D11C83B7817F846083BF83B7C5 -:1039E000816083BF7894889583B78E7F83BF0FB63D -:1039F000F894A8958091600088618093600010928F -:103A000060000FBE08950C94B51C0E9489150E9499 -:103A100021100E94F7020C94031D1F920F920FB603 -:103A20000F9211248F939F93AF93BF9380910C02B9 -:103A3000811113C080914F0290915002A0915102C8 -:103A4000B09152024196A11DB11D80934F029093F7 -:103A50005002A0935102B0935202BF91AF919F9137 -:103A60008F910F900FBE0F901F90189582E084BD2C -:103A700093E095BD9AEF97BD80936E0008952FB7A0 -:103A8000F89480914F0290915002A0915102B09110 -:103A900052022FBF0895CF92DF92EF92FF920F93C1 -:103AA0001F932FB7F89440914F02509150026091AC -:103AB0005102709152022FBF6A017B01EE24FF2454 -:103AC0008C0120E030E0C016D106E206F30610F4C7 -:103AD000415051099A01281B390BC9011F910F91BF -:103AE000FF90EF90DF90CF90089578941F920F92FF -:103AF0000FB60F9211248F939F93AF93BF93809132 -:103B00004F0290915002A0915102B0915202019641 -:103B1000A11DB11D80934F0290935002A0935102BA -:103B2000B0935202BF91AF919F918F910F900FBEB2 -:103B30000F901F90189587E797E79093010880935F -:103B400000089AE088E10FB6F894A8958093600089 -:103B50000FBE90936000FFCFAF92BF92CF92DF92E3 -:103B6000EF92FF920F931F93CF93C0E0CC24C394A6 -:103B7000D12CE82EF12C8C2F0E9483095C0100E0EF -:103B800010E0C601002E02C0880F991F0A94E2F7C8 -:103B90008A219B21892B31F40F5F1F4F0A301105B9 -:103BA00081F70AC0602F7C2F80E00E94B305E816E1 -:103BB000F90691F781E004C0CF5FC330E1F680E001 -:103BC000CF911F910F91FF90EF90DF90CF90BF901A -:103BD000AF900895CF93C82F8CE20E94AC1D88232C -:103BE00021F08C2FCF910C94AC1D80E0CF910895E3 -:103BF000CF930E94141C811102C00E94F31BC5E6E2 -:103C0000C15049F00E94BF088FE39CE90197F1F78A -:103C100000C00000F5CF89E20E94EA1D81110FC1AA -:103C20008AE20E94EA1D81110E94F31B85E00E9436 -:103C3000EA1D81110E949B1D0E941F1C80930B0294 -:103C400087E00E94EA1D8823A9F18BE10E94EA1D0A -:103C5000882351F080910B0281FB222720F991E00B -:103C6000922790FB81F90EC08EE00E94EA1D882306 -:103C700061F080910B0282FB222720F991E09227CC -:103C800090FB82F980930B0215C080E10E94EA1D2F -:103C900090910B02882341F093FB222720F981E0C9 -:103CA000822780FB93F904C0892F809580FB90F9CF -:103CB00090930B0280910B020E94231C0E94311CE6 -:103CC00090E0909354028093530280EE0E94EA1D8C -:103CD000882341F080915302982F909590FB80F9B2 -:103CE0008093530289E30E94EA1D882359F0809152 -:103CF000530281FB222720F991E0922790FB81F962 -:103D00008093530282EE0E94EA1D882359F080912D -:103D1000530282FB222720F991E0922790FB82F93F -:103D20008093530286EE0E94EA1D882359F0809109 -:103D3000530283FB222720F991E0922790FB83F91D -:103D40008093530283EE0E94EA1D882359F08091EC -:103D5000530284FB222720F991E0922790FB84F9FB -:103D60008093530285E30E94EA1D882359F08091D5 -:103D7000530285FB222720F991E0922790FB85F9D9 -:103D80008093530281E30E94EA1D882359F08091B9 -:103D9000530286FB222720F991E0922790FB86F9B7 -:103DA0008093530281E10E94EA1D882359F080919B -:103DB000530287FB222720F991E0922790FB87F995 -:103DC00080935302809153020E94351C87E20E9427 -:103DD000EA1DC82F8EE10E94EA1D8111C2608FE1A9 -:103DE0000E94EA1D8111C46080E20E94EA1D8111D7 -:103DF000C86081E20E94EA1D8111C06182E20E94D6 -:103E0000EA1D8111C06283E20E94EA1D8111C06433 -:103E100084E20E94EA1D882311F0C06802C0CC230E -:103E200029F08C2F0E942C1C6C2F03C00E94281C90 -:103E3000682F70E080E090E0CF910C949119CF91C1 -:103E4000089580910F0280FF0BC06091120185E000 -:103E5000689FB001112475956795759567952BC07E -:103E600081FF09C06091120185E0689FB0011124B3 -:103E70007595679520C082FF07C06091120185E0AB -:103E8000689FB001112417C0909110029923D1F0BE -:103E900060911101961788F72091120185E0289F03 -:103EA00090011124929FA001939F500D112470E066 -:103EB000CA010E94CF2B6038710540F4611571056D -:103EC00019F406C065E070E0862F08958FE7089525 -:103ED00081E0089580910F0280FF08C06091100179 -:103EE00070E0759567957595679521C081FF06C04F -:103EF0006091100170E07595679519C082FF04C04C -:103F00006091100170E010C090911002992399F017 -:103F100060910F019617A0F780911001899FC00151 -:103F2000112470E00E94CF2B6038710540F46115B8 -:103F3000710519F406C061E070E0862F08958FE7DF -:103F4000089581E00895803F21F40E94211F81950A -:103F500004C0813F29F40E94211F80931302089519 -:103F6000823F21F40E94211F819504C0833F29F4E0 -:103F70000E94211F809312020895893F19F40E9424 -:103F80006A1F05C08A3F31F40E946A1F81958093A1 -:103F9000140208958B3F21F40E946A1F819504C08A -:103FA0008C3F29F40E946A1F809315020895843F74 -:103FB00021F480911102816017C0853F21F4809126 -:103FC0001102826011C0863F21F480911102846049 -:103FD0000BC0873F21F480911102886005C0883FA3 -:103FE00031F48091110280618093110208958D3F18 -:103FF00021F480910F0281600BC08E3F21F48091EB -:104000000F02826005C08F3F29F480910F02846007 -:1040100080930F020895803F39F48091130287FF47 -:104020006CC01092130269C0813F29F48091130281 -:104030001816BCF362C090911202823F29F497FFD8 -:104040005CC01092120259C0833F19F41916CCF3C8 -:1040500054C0893F41F48091140218160CF04DC0F1 -:10406000109214024AC08A3F29F48091140287FFFB -:1040700044C0F6CF8B3F39F48091150287FF3DC0D5 -:10408000109215023AC08C3F29F48091150218163F -:10409000BCF333C0843F21F4809111028E7F17C09E -:1040A000853F21F4809111028D7F11C0863F21F45C -:1040B000809111028B7F0BC0873F21F48091110208 -:1040C000877F05C0883F31F4809111028F7E8093F5 -:1040D000110213C08D3F21F480910F028E7F0BC01F -:1040E0008E3F21F480910F028D7F05C08F3F29F410 -:1040F00080910F028B7F80930F02809112028111B9 -:104100000EC08091130281110AC0809114028111A6 -:1041100006C080911502811102C01092100208950C -:1041200081E192E00E9438100E943F1D90930E02A0 -:1041300080930D0208951F93CF93DF9380910D021A -:1041400090910E020E944B1DAC0190911002992398 -:1041500021F02091130130E006C0209114018AE083 -:10416000289F900111244217530708F477C08091CB -:104170001202C0911302D091140210911502811104 -:1041800007C0C11167C0D11165C0111163C066C0FD -:104190009F3F19F09F5F90931002181624F40E941D -:1041A000211F809312028091120287FF05C00E9496 -:1041B000211F8195809312021C1624F40E94211F56 -:1041C000809313028091130287FF05C00E94211F74 -:1041D000819580931302309112023323C1F0209114 -:1041E00013022223A1F045EB3403C0011124892FCF -:1041F000911101C081E08093120235EB2303C001CD -:104200001124892F911101C081E0809313021D16A2 -:1042100024F40E946A1F809314028091140287FF85 -:1042200005C00E946A1F819580931402111624F420 -:104230000E946A1F809315028091150287FF05C0B6 -:104240000E946A1F819580931502DF91CF911F9183 -:104250000C9490209F3F09F09DCFAECFDF91CF917E -:104260001F910895E1E1F2E085E0DF011D928A955A -:10427000E9F71092100210920F0208958091360211 -:1042800008950F931F93CF93DF9300D01F92CDB764 -:10429000DEB78C010E94B723823011F0843019F50B -:1042A00083E089831B830A838093E9008FEF9091D9 -:1042B000E800815095FD06C095ED9A95F1F7000054 -:1042C0008111F5CF8091E80085FF0DC040E050E0FE -:1042D00063E070E0CE0101960E94D4238091E80053 -:1042E0008E778093E8000F900F900F90DF91CF9121 -:1042F0001F910F910895CF93DF9300D01F92CDB7F8 -:10430000DEB720915902243031F522E0298380580C -:1043100091099B838A8383E08093E9008FEF9091DA -:10432000E800815095FD06C095ED9A95F1F70000E3 -:104330008111F5CF8091E80085FF0DC040E050E08D -:1043400063E070E0CE0101960E94D4238091E800E2 -:104350008E778093E8000F900F900F90DF91CF91B0 -:104360000895CF93DF93EC010E94B723823011F0C0 -:104370008430F9F482E08093E9008FEF9091E800B7 -:10438000815095FD06C095ED9A95F1F700008111D9 -:10439000F5CF8091E80085FF0CC040E050E065E07B -:1043A00070E0CE010E94D4238091E8008E77809344 -:1043B000E800DF91CF910895CF93DF93EC010E9445 -:1043C000B723823019F0843009F047C080911F0173 -:1043D0008823E1F08091530287FF18C084E0809326 -:1043E000E9008FEF9091E800815095FD06C095E1BE -:1043F0009A95F1F700008111F5CF8091E80085FFD3 -:104400002CC040E050E060E270E017C081E0809393 -:10441000E9008FEF9091E800815095FD06C095ED81 -:104420009A95F1F700008111F5CF8091E80085FFA2 -:1044300014C040E050E068E070E0CE010E94D42358 -:104440008091E8008E778093E80080E2FE01A6E18B -:10445000B2E001900D928A95E1F7DF91CF91089536 -:1044600080915802811109C00E9465250E94C225D1 -:104470008091E20084608093E200089510925802D7 -:104480000895089508950C94051D42E061EC81E0C3 -:104490000E94DE2442E061EC82E00E94DE2442E0E1 -:1044A00061EC83E00E94DE2442E261EC84E00C9443 -:1044B000DE2480915B02833009F455C030F48130F2 -:1044C00071F0823009F48EC008958A3009F47AC000 -:1044D0008B3009F460C0893009F09CC020C0809105 -:1044E0005A02813A09F096C08091E800877F809354 -:1044F000E80080915E0290915F02892B21F460E2D6 -:1045000086E192E003C060E080E090E070E00E940D -:104510001F248091E8008B778093E80008958091B4 -:104520005A02813209F076C080915E0290915F025A -:10453000009719F0039709F06DC08091E800877F1C -:104540008093E8008091E80082FD05C080915902C7 -:104550008111F8CF5FC08091F10080933602809185 -:10456000E8008B7753C080915A02813A09F052C01B -:1045700080915E0290915F02892B09F04BC080917F -:10458000E800877F8093E8008091E80080FFFCCFFF -:1045900080911F0136C080915A028132D9F58091F5 -:1045A0005E0290915F02892BA9F58091E800877FD8 -:1045B0008093E8000E94132580915C0280931F0184 -:1045C0000C94891580915A02813221F58091E8007E -:1045D000877F8093E8000E94132580915D0280937D -:1045E0003702089580915A02813AA1F48091E8003F -:1045F000877F8093E8008091E80080FFFCCF809166 -:1046000037028093F1008091E8008E778093E80074 -:104610000C941325089584B7877F84BF0FB6F89450 -:10462000A89580916000886180936000109260007E -:104630000FBE80E880936100109261000E947010AC -:104640000E9465250E94C2258091E20084608093CB -:10465000E20078940E9457280E94741085E191E04E -:104660000E941C1080915902853069F40E94D31C6D -:10467000809157028823B1F30E94BA1C882391F3DA -:104680000E94BE23EFCF0E9482100E94A70FEACFA4 -:104690000C944A23292F332723303105C9F060F4C5 -:1046A0002130310581F02230310509F047C08DE617 -:1046B00090E022EC33E046C02132310511F1223284 -:1046C000310561F13BC082E190E02FE234E03AC075 -:1046D00099278130910561F040F08230910559F0C1 -:1046E000039761F5ECE9F3E008C0EEEBF3E005C0F9 -:1046F000E0EBF3E002C0E2EAF3E0849190E09F0196 -:1047000021C064307105D0F4660F771FFB01E75CB0 -:10471000FE4F2081318189E090E014C06430710542 -:1047200068F4FB01EE0FFF1FEF5CFE4F208131812B -:10473000FB01E35DFE4F808190E004C080E090E0EB -:1047400020E030E0FA013183208308950895CF936B -:10475000C82F0E94A623C0933802CF91089580915C -:104760005902843011F081E0089582E0089580912B -:104770003802811102C00C94AF23089580E189BDF5 -:1047800082E189BD09B400FEFDCF8091D8008F7D04 -:104790008093D8008091E00082608093E000809157 -:1047A000E00081FDFCCF0895CF92DF92EF92FF925F -:1047B0000F931F93CF93DF93EC018B017A010E943B -:1047C0003225811133C0E114F10439F0F701808101 -:1047D0009181081B190BC80FD91FC12CD12C0115B1 -:1047E000110519F18091E80085FD16C08091E8005F -:1047F0008E778093E800E114F10449F0F70180819D -:104800009181C80ED91ED182C08285E00FC00E945E -:104810003225882321F30AC089918093F100015049 -:104820001109FFEFCF1ADF0ADACF80E0DF91CF91D5 -:104830001F910F91FF90EF90DF90CF9008952091FE -:104840006002309161022617370748F06115710543 -:1048500039F42091E8002E772093E80001C0B901D7 -:10486000FC0120E06115710579F1809159028823DE -:10487000F1F18530F1F18091E80083FD3CC0809139 -:10488000E80082FD2EC08091E80080FFEBCF2091F0 -:10489000F3008091F20090E0922B6115710551F0C8 -:1048A0008830910538F421912093F100615071090D -:1048B0000196F3CF21E0089709F020E08091E8000D -:1048C0008E778093E800CECF2111CFCF0AC08091A0 -:1048D0005902882361F0853061F08091E80083FD02 -:1048E0000AC08091E80082FFF2CF80E0089582E064 -:1048F000089583E0089581E0089520916002309149 -:1049000061022617370748F06115710539F42091C7 -:10491000E8002E772093E80001C0B901FC0120E0F7 -:104920006115710591F180915902882309F440C005 -:10493000853009F43FC08091E80083FD3DC080913F -:10494000E80082FD2FC08091E80080FFE9CF209130 -:10495000F3008091F20090E0922B6115710559F0FF -:104960008830910540F424912093F10031966150F4 -:1049700071090196F2CF21E0089709F020E08091BB -:10498000E8008E778093E800CBCF2111CCCF0AC00E -:1049900080915902882361F0853061F08091E800B0 -:1049A00083FD0AC08091E80082FFF2CF80E0089585 -:1049B00082E0089583E0089581E00895982F97306C -:1049C00068F59093E900981739F07091EC00209108 -:1049D000ED005091F00003C0242F762F50E021FD10 -:1049E00002C09F5FECCF3091EB003E7F3093EB0035 -:1049F0003091ED003D7F3093ED003091EB00316060 -:104A00003093EB007093EC002093ED005093F00096 -:104A10002091EE0027FDE5CF80E008958F70809310 -:104A2000E90081E0089580915A0287FF11C08091CA -:104A3000E80082FD05C0809159028111F8CF11C0B4 -:104A40008091E8008B770BC080915902882349F050 -:104A50008091E80080FFF8CF8091E8008E77809306 -:104A6000E80008952091E4003091E50095E640913A -:104A7000EC00842F817040FF23C08091E80080FD0E -:104A80001DC080915902882399F0853099F080915A -:104A9000EB0085FD11C04091E4005091E500241722 -:104AA000350729F3915011F09A01E1CF84E0089580 -:104AB00082E0089583E0089581E0089580E00895FC -:104AC0004091E80042FFDDCF08950E94D3250E9467 -:104AD000DB25E0EEF0E0808181608083E8EDF0E0AE -:104AE00080818F77808319BCA7EDB0E08C918E7F99 -:104AF0008C9380818F7E80831092580208950F934B -:104B00001F93CF93DF930E94D3250E94DB25C8ED2E -:104B1000D0E088818F7788838881806888838881C6 -:104B20008F7D888319BC1092590210925502109201 -:104B300057021092560200EE10E0F80180818B7F40 -:104B4000808388818160888342E060E080E00E9409 -:104B5000DE24E1EEF0E080818E7F8083E2EEF0E003 -:104B6000808181608083808188608083F80180817A -:104B70008E7F8083888180618883DF91CF911F91B0 -:104B80000F910895E8EDF0E080818F7E8083E7ED5E -:104B9000F0E080818160808384E082BF81E0809347 -:104BA00058020C947F25E8EDF0E080818E7F8083B1 -:104BB0001092E20008951092DA001092E100089538 -:104BC0001F920F920FB60F9211242F933F934F9382 -:104BD0005F936F937F938F939F93AF93BF93EF9365 -:104BE000FF938091E10082FF0BC08091E20082FF81 -:104BF00007C08091E1008B7F8093E1000E945628DE -:104C00008091DA0080FF1FC08091D80080FF1BC018 -:104C10008091DA008E7F8093DA008091D90080FF46 -:104C20000DC080E189BD82E189BD09B400FEFDCFE0 -:104C300081E0809359020E94302205C019BC109275 -:104C400059020E943E228091E10080FF19C08091AC -:104C5000E20080FF15C08091E2008E7F8093E20029 -:104C60008091E20080618093E2008091D8008062B0 -:104C70008093D80019BC85E0809359020E9442229B -:104C80008091E10084FF30C08091E20084FF2CC05D -:104C900080E189BD82E189BD09B400FEFDCF80912C -:104CA000D8008F7D8093D8008091E1008F7E809323 -:104CB000E1008091E2008F7E8093E2008091E2002B -:104CC00081608093E20080915502882311F084E096 -:104CD00007C08091E30087FD02C081E001C083E04E -:104CE000809359020E9443228091E10083FF29C0F2 -:104CF0008091E20083FF25C08091E100877F80934F -:104D0000E10082E080935902109255028091E10007 -:104D10008E7F8093E1008091E2008E7F8093E2009D -:104D20008091E20080618093E20042E060E080E0F8 -:104D30000E94DE248091F00088608093F0000E9441 -:104D40004122FF91EF91BF91AF919F918F917F9100 -:104D50006F915F914F913F912F910F900FBE0F90E8 -:104D60001F9018951F920F920FB60F9211242F9338 -:104D70003F934F935F936F937F938F939F93AF93E3 -:104D8000BF93CF93DF93EF93FF93C091E900CF7070 -:104D90008091EC00D82FD17080FDD0E81092E9000E -:104DA0008091F000877F8093F00078940E94F6262F -:104DB0001092E9008091F00088608093F000CD2B84 -:104DC000CF70C093E900FF91EF91DF91CF91BF9138 -:104DD000AF919F918F917F916F915F914F913F9193 -:104DE0002F910F900FBE0F901F9018951F93CF9388 -:104DF000DF93CDB7DEB7AA970FB6F894DEBF0FBE2C -:104E0000CDBFEAE5F2E08091F100819322E0E23645 -:104E1000F207C9F70E9459228091E80083FF2EC152 -:104E200080915A0290915B02492F50E04A3051051F -:104E300008F024C1FA01E556FF4F0C94E32B8038AB -:104E400021F0823809F01AC108C080915602909171 -:104E50005702992389F082600FC080915E028F70A3 -:104E6000873008F00BC18093E9008091EB0085FB4F -:104E7000882780F91092E9009091E800977F90933D -:104E8000E8008093F1001092F100D1C0282F2D7F0F -:104E900009F0F4C0882319F0823061F0EFC08091EE -:104EA0005C02813009F0EAC0933009F080E0809321 -:104EB00057022EC080915C0281112AC080915E024F -:104EC0008F702FEF280F263008F0D8C08093E900AC -:104ED0002091EB0020FF1CC0933021F48091EB0067 -:104EE000806214C09091EB0090619093EB0021E000 -:104EF00030E0A90102C0440F551F8A95E2F74093A4 -:104F0000EA001092EA008091EB0088608093EB0049 -:104F10001092E9008091E800877F8093E8000E946A -:104F20001325ACC08111AAC010915C021F7780913B -:104F3000E3008078812B8093E3008091E800877FF5 -:104F40008093E8000E9413258091E80080FFFCCF49 -:104F50008091E30080688093E300111102C082E039 -:104F600001C083E08093590289C08058823008F0E4 -:104F700085C080915C0290915D028C3D53E0950765 -:104F800079F583E08A838AE289834FB7F894DE015A -:104F9000139620E03EE051E2E32FF0E050935700FB -:104FA000E49120FF03C0E295EF703F5FEF708E2F1A -:104FB00090E0EA3010F0C79601C0C0968D939D93A3 -:104FC0002F5F243149F74FBF8091E800877F80939E -:104FD000E8006AE270E0CE0101960E941F2416C02C -:104FE00060915E0270915F02AE014F5F5F4F0E9461 -:104FF0004823BC01892B09F441C09091E800977FB8 -:105000009093E80089819A810E947D248091E80034 -:105010008B778093E80032C0803881F58091E8007A -:10502000877F8093E800809155028093F100809102 -:10503000E8008E7772CF811121C080915C0290913F -:105040005D0299270297D4F48091E800877F8093CE -:10505000E80080915C02809355020E9413258091A4 -:105060005502811106C08091E30087FD02C081E0F6 -:1050700001C084E0809359020E9445228091E8009B -:1050800083FF0AC08091E800877F8093E8008091C9 -:10509000EB0080628093EB00AA960FB6F894DEBF17 -:1050A0000FBECDBFDF91CF911F9108950895CF938B -:1050B000809159028823A1F0C091E900CF709091AE -:1050C000EC00892F817090FD80E8C82B1092E900D8 -:1050D0008091E80083FD0E94F626CF70C093E9001E -:1050E000CF9108955058BB27AA270E948A280C9474 -:1050F000352A0E94272A38F00E942E2A20F039F4FF -:105100009F3F19F426F40C94FD290EF4E095E7FB7B -:105110000C94F729E92F0E94462A58F3BA17620720 -:1051200073078407950720F079F4A6F50C94682A94 -:105130000EF4E0950B2EBA2FA02D0B01B9019001B2 -:105140000C01CA01A0011124FF27591B99F0593FF6 -:1051500050F4503E68F11A16F040A22F232F342F3E -:105160004427585FF3CF469537952795A795F0408C -:105170005395C9F77EF41F16BA0B620B730B840BA1 -:10518000BAF09150A1F0FF0FBB1F661F771F881F59 -:10519000C2F70EC0BA0F621F731F841F48F48795B1 -:1051A00077956795B795F7959E3F08F0B0CF9395A3 -:1051B000880F08F09927EE0F9795879508950E941C -:1051C000F3280C94352A0E942E2A58F00E94272A90 -:1051D00040F029F45F3F29F00C94F72951110C9409 -:1051E000692A0C94FD290E94462A68F39923B1F399 -:1051F000552391F3951B550BBB27AA2762177307FD -:10520000840738F09F5F5F4F220F331F441FAA1F90 -:10521000A9F335D00E2E3AF0E0E832D0915050404C -:10522000E695001CCAF72BD0FE2F29D0660F771FFA -:10523000881FBB1F261737074807AB07B0E809F0E0 -:10524000BB0B802DBF01FF2793585F4F3AF09E3F65 -:10525000510578F00C94F7290C94692A5F3FE4F328 -:10526000983ED4F3869577956795B795F7959F5FA8 -:10527000C9F7880F911D9695879597F90895E1E0F4 -:10528000660F771F881FBB1F621773078407BA0753 -:1052900020F0621B730B840BBA0BEE1F88F7E095AE -:1052A000089529F416F00C94F7290C94682A0C94AC -:1052B000FD290E944E2AA8F39638A0F707F80F920E -:1052C000E8942BE33AEA48EB5FE70E94FB2A0F924F -:1052D0000F920F924DB75EB70F920E94B12AEAE487 -:1052E000F1E00E94002A4F915F91EF91FF91E595C7 -:1052F000EE1FFF1F49F0FE57E0684427EE0F441FE2 -:10530000FA95E1F74195550B0E947B2A0F9007FE15 -:105310000C946F2A08950E944E2A88F09F5798F0A7 -:10532000B92F9927B751B0F0E1F0660F771F881FAA -:10533000991F1AF0BA95C9F714C0B13091F00E94C4 -:10534000682AB1E008950C94682A672F782F88277F -:10535000B85F39F0B93FCCF3869577956795B395EB -:10536000D9F73EF490958095709561957F4F8F4F5A -:105370009F4F0895E89409C097FB3EF4909580955F -:10538000709561957F4F8F4F9F4F9923A9F0F92F0B -:1053900096E9BB279395F695879577956795B79589 -:1053A000F111F8CFFAF4BB0F11F460FF1BC06F5F6F -:1053B0007F4F8F4F9F4F16C0882311F096E911C081 -:1053C000772321F09EE8872F762F05C0662371F0A2 -:1053D00096E8862F70E060E02AF09A95660F771FB6 -:1053E000881FDAF7880F9695879597F9089597F9AA -:1053F0009F6780E870E060E008959FEF80EC08957B -:10540000DF93CF931F930F93FF92EF92DF927B0175 -:105410008C01689406C0DA2EEF010E94F82AFE0182 -:10542000E894A5912591359145915591A6F3EF0109 -:105430000E948A28FE019701A801DA9469F7DF909B -:10544000EF90FF900F911F91CF91DF91089500246D -:105450000A941616170618060906089500240A94D9 -:1054600012161306140605060895092E0394000C5F -:1054700011F4882352F0BB0F40F4BF2B11F460FFEE -:1054800004C06F5F7F4F8F4F9F4F089557FD905817 -:10549000440F551F59F05F3F71F04795880F97FBF8 -:1054A000991F61F09F3F79F08795089512161306B2 -:1054B0001406551FF2CF4695F1DF08C016161706E1 -:1054C0001806991FF1CF8695710561050894089516 -:1054D000E894BB2766277727CB0197F908959B01AE -:1054E000AC0160E070E080E89FE30C94DF280C944E -:1054F000F7290C945A2B0E944E2AD8F39923C9F30A -:10550000940F511DA3F39150504094F059F088230B -:1055100032F0660F771F881F91505040C1F79E3FB1 -:1055200051052CF7880F911D9695879597F9089549 -:105530005F3FACF0983E9CF0BB27869577956795CA -:10554000B79508F4B1609395C1F7BB0F58F711F404 -:1055500060FFE8CF6F5F7F4F8F4F9F4FE3CF0C947B -:10556000692AFA01DC01AA0FBB1F9B01AC01BF57DE -:1055700028F4222733274427507820C0B75190F4CD -:10558000AB2F0024469537952795011CA395D2F3A0 -:10559000002071F0220F331F441FB395DAF30ED0B1 -:1055A0000C94722861307105A0E88A07B94630F47E -:1055B0009B01AC016627772788279078309621F0E9 -:1055C000208331834283538308950E94F82A0C94E8 -:1055D000352A0E94272A38F00E942E2A20F095238F -:1055E00011F00C94F7290C94FD2911240C94692ACC -:1055F0000E94462A70F3959FC1F3950F50E0551F06 -:10560000629FF001729FBB27F00DB11D639FAA2717 -:10561000F00DB11DAA1F649F6627B00DA11D661F66 -:10562000829F2227B00DA11D621F739FB00DA11D87 -:10563000621F839FA00D611D221F749F3327A00D41 -:10564000611D231F849F600D211D822F762F6A2FDD -:1056500011249F5750409AF0F1F088234AF0EE0F42 -:10566000FF1FBB1F661F771F881F91505040A9F76F -:105670009E3F510580F00C94F7290C94692A5F3FF6 -:10568000E4F3983ED4F3869577956795B795F795AB -:10569000E7959F5FC1F7FE2B880F911D9695879523 -:1056A00097F908959F930E946A2B0F9007FCEE5F75 -:1056B0000C94932B9F3F31F0915020F48795779570 -:1056C0006795B795880F911D9695879597F90895D9 -:1056D0000C94FD290E944E2AD8F3E894E0E0BB2701 -:1056E0009F57F0F02AED3FE049EC06C0EE0FBB0FEC -:1056F000661F771F881F28F0B23A62077307840776 -:1057000028F0B25A620B730B840BE3959A9572F7EB -:10571000803830F49A95BB0F661F771F881FD2F729 -:1057200090480C945C2BEF93E0FF07C0A2EA2AEDAF -:105730003FE049EC5FEB0E948A280E94352A0F90D7 -:10574000039401FC9058E2E7F1E00C94A72B9F939F -:105750008F937F936F93FF93EF939B01AC010E9414 -:10576000E52AEF91FF910E94002A2F913F914F91DE -:105770005F910C94E52AAA1BBB1B51E107C0AA1F2D -:10578000BB1FA617B70710F0A61BB70B881F991FE2 -:105790005A95A9F780959095BC01CD01089597FB86 -:1057A000072E16F4009407D077FD09D00E94BB2B7A -:1057B00007FC05D03EF4909581959F4F0895709514 -:1057C00061957F4F0895EE0FFF1F0590F491E02D36 -:1057D0000994FC014150504030F001900616D1F779 -:1057E0003197CF010895882799270895F999FECF19 -:1057F00092BD81BDF89A992780B50895A6E1B0E0E1 -:1058000044E050E00C94302CA8E1B0E042E050E0DD -:105810000C94302C262FF999FECF92BD81BDF89AB9 -:10582000019700B4021639F01FBA20BD0FB6F894E4 -:10583000FA9AF99A0FBE08950396272F0E940B2C0F -:105840000E940A2C252F0E940B2C242F0C940B2C29 -:105850000196272F0E940B2C0C940A2CDC01CB0103 -:10586000FC01F999FECF06C0F2BDE1BDF89A319670 -:1058700000B40D9241505040B8F70895F894FFCF0E -:10588000010201191A1B1C1D1E1F202122E80128DC -:1058900008140A321E3E21DC21B1217B2141210165 -:1058A00097C66636323331F7F6F5943435404D36C7 -:1058B00039FD04B0047A044104D403ED0306041F47 -:0258C0000400E2 -:00000001FF diff --git a/keyboards/alpha/keymaps/vderm/keymap.c b/keyboards/alpha/keymaps/vderm/keymap.c deleted file mode 100644 index 5fc642319b8..00000000000 --- a/keyboards/alpha/keymaps/vderm/keymap.c +++ /dev/null @@ -1,34 +0,0 @@ -#include QMK_KEYBOARD_H - -#define HOME 0 -#define FN 1 -#define FNCHAR 2 -#define FKEYS 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [HOME] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, - MT(MOD_LCTL, KC_Z), MT(MOD_LALT, KC_X), LT(1, KC_C), LT(2, KC_V), MT(MOD_LSFT, KC_SPC), MT(MOD_RGUI,KC_B), MT(MOD_RALT, KC_N), MT(MOD_RCTL, KC_M)), - - [FN] = LAYOUT( - KC_ESC, KC__MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, - KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BSPC, - KC_LCTL, KC_LALT, KC_TRNS, MO(3), MT(MOD_LSFT, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL), - - [FNCHAR] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, - KC_GRV,KC_NO,KC_MINS,KC_EQL,KC_BSLS,KC_LBRC,KC_RBRC,KC_SCLN,KC_QUOT,KC_BSPC, - KC_LCTL, KC_LALT, MO(3), KC_TRNS, MT(MOD_LSFT, KC_SPC), KC_COMM, KC_DOT, KC_SLSH), - - [FKEYS] = LAYOUT( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, - KC_F11,KC_F12,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_DEL, - KC_LCTL, KC_LALT, KC_TRNS, KC_TRNS, MT(MOD_LSFT, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL), -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} diff --git a/keyboards/alpha/readme.md b/keyboards/alpha/readme.md deleted file mode 100644 index 4b5c7fc8043..00000000000 --- a/keyboards/alpha/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Alpha - -![Alpha](https://i.imgur.com/J6EJ30N.jpg) - -A 28-key, semi-ortho keyboard designed by PyroL! - -Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL) - -Hardware Supported: Alpha PCB, Pro Micro - -Hardware Availability: on a group-buy basis for now. Pro Micros can be found on Ali or from the official Sparkfun website. - -Make example for Alpha (after setting up your build environment): - - make alpha:default - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information. - -Please see [PyrooL/Alpha](https://www.github.com/PyrooL/Alpha) for **build instructions**, parts lists, Gerbers, and case files. diff --git a/keyboards/alpha/rules.mk b/keyboards/alpha/rules.mk deleted file mode 100755 index 61ea958d7e4..00000000000 --- a/keyboards/alpha/rules.mk +++ /dev/null @@ -1,56 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -BOOTLOADER = caterina - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes diff --git a/keyboards/alps64/alps64.c b/keyboards/alps64/alps64.c deleted file mode 100644 index 472d1d445c4..00000000000 --- a/keyboards/alps64/alps64.c +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "quantum.h" - -#define LED_ON() do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0) -#define LED_OFF() do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0) -#define LED_TGL() do { DDRC |= (1<<5); PINC |= (1<<5); } while (0) - - -void matrix_init_kb(void) { - LED_ON(); - _delay_ms(500); - LED_OFF(); - - matrix_init_user(); -} \ No newline at end of file diff --git a/keyboards/alps64/alps64.h b/keyboards/alps64/alps64.h deleted file mode 100644 index 14ff552185d..00000000000 --- a/keyboards/alps64/alps64.h +++ /dev/null @@ -1,126 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef ALPS64_H -#define ALPS64_H - -#include "quantum.h" - -/* Alps64 keymap definition macro */ - -#define LAYOUT_all( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ - K30, K40, K50, K60, K70, K00, K10, K20 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77 } \ -} - -#define LAYOUT_iso( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \ - K30, K40, K50, K60, K70, K00, K20 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { KC_NO, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, K41, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77 } \ -} - -#define LAYOUT_60_ansi( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \ - K30, K40, K50, K60, K70, K00, K10, K20 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77 } \ -} - -#define LAYOUT_infinity( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ - K30, K40, K50, K60, K70, K00, K10, K20 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77 } \ -} - -#define LAYOUT_aek_103( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \ - K30, K40, K50, K60, K00, K10, K20 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { KC_NO, K71, K72, K73, K74, K75, K76, K77 } \ -} - -#define LAYOUT_kc( \ - K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ - K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ - K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ - K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ - K30, K40, K50, K60, K70, K00, K10, K20 \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ - { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \ -} - -#endif diff --git a/keyboards/alps64/config.h b/keyboards/alps64/config.h deleted file mode 100644 index 74f8017add0..00000000000 --- a/keyboards/alps64/config.h +++ /dev/null @@ -1,68 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -#define MANUFACTURER TMK -#define PRODUCT Alps64 -#define DESCRIPTION TMK keyboard firmware for Alps64 - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 - -#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, C2 } -#define UNUSED_PINS - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/alps64/info.json b/keyboards/alps64/info.json deleted file mode 100644 index 1f1af4f1f33..00000000000 --- a/keyboards/alps64/info.json +++ /dev/null @@ -1,28 +0,0 @@ -{ - "keyboard_name": "alps64", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_infinity": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - - "LAYOUT_aek_103": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":6.5}, {"label":"Alt", "x":10.75, "y":4, "w":1.5}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - - "LAYOUT_iso": { - "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"AltGr", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - } - } -} diff --git a/keyboards/alps64/keymaps/crd/keymap.c b/keyboards/alps64/keymaps/crd/keymap.c deleted file mode 100644 index 9268083522e..00000000000 --- a/keyboards/alps64/keymaps/crd/keymap.c +++ /dev/null @@ -1,30 +0,0 @@ -#include QMK_KEYBOARD_H - -enum keyboard_layers { - _BL = 0, // Base Layer - _FL // Function Layer -}; - -// Custom #defined keycodes (shorter macros for readability) -#define KC_CTES CTL_T(KC_ESC) -#define KC_RSUP RSFT_T(KC_UP) -#define KC_FNDN LT(_FL, KC_DOWN) -#define KC_RGLT RCMD_T(KC_LEFT) -#define KC_RCRT RCTL_T(KC_RIGHT) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BL] = LAYOUT_aek_103( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CTES, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSUP, - MO(_FL), KC_LALT, KC_LGUI, KC_SPC, KC_RGLT, KC_FNDN, KC_RCRT - ), - [_FL] = LAYOUT_aek_103( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, KC_MUTE, _______, _______, KC_PGDN, KC_PGUP, RESET, - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_SLCK, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/alps64/keymaps/default/keymap.c b/keyboards/alps64/keymaps/default/keymap.c deleted file mode 100644 index 72d29a06fef..00000000000 --- a/keyboards/alps64/keymaps/default/keymap.c +++ /dev/null @@ -1,12 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - LAYOUT_all( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NUHS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_ESC, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_APP, KC_RALT, KC_RGUI, KC_RCTL - ), -}; diff --git a/keyboards/alps64/keymaps/mechmerlin/keymap.c b/keyboards/alps64/keymaps/mechmerlin/keymap.c deleted file mode 100644 index d32d9f61e99..00000000000 --- a/keyboards/alps64/keymaps/mechmerlin/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -#include QMK_KEYBOARD_H -#include "mechmerlin.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - [_BL] = LAYOUT_infinity( \ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CTCP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(_AL), \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FL), KC_RALT, KC_RGUI, KC_RCTL), - - [_FL] = LAYOUT_infinity( \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_DEL, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [_AL] = LAYOUT_infinity( \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RSFT_T(KC_UP), KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT), -}; diff --git a/keyboards/alps64/keymaps/mechmerlin/readme.md b/keyboards/alps64/keymaps/mechmerlin/readme.md deleted file mode 100644 index 896e7ec3cb6..00000000000 --- a/keyboards/alps64/keymaps/mechmerlin/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# MechMerlin Alps64 Infinity Keymap - -This is the 60% infinity layout used by u/merlin36, host of the [MechMerlin](www.youtube.com/mechmerlin) -YouTube channel. - -## Keymap Notes -- `Caps Lock` can be held to act as a `Left Control` - -### Build -To build the firmware file associated with this keymap, simply run `make alps64:mechmerlin`. diff --git a/keyboards/alps64/led.c b/keyboards/alps64/led.c deleted file mode 100644 index d20c51aabe7..00000000000 --- a/keyboards/alps64/led.c +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - _delay_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< @A9entOran9e#6134 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - - -#include "alu84.h" -#include "rgblight.h" -#include "action_layer.h" -#include "quantum.h" -#include "action.h" - - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - - - diff --git a/keyboards/alu84/alu84.h b/keyboards/alu84/alu84.h deleted file mode 100755 index c171e4c1d8a..00000000000 --- a/keyboards/alu84/alu84.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2017 @TurboMech /u/TurboMech @A9entOran9e#6134 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - - -#ifndef ALU84_H -#define ALU84_H - -#include "quantum.h" - - - -#define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \ - K500, K501, K503, K506, K510, K511, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \ - { K500, K501, KC_NO, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515 } \ -} - -#endif diff --git a/keyboards/alu84/config.h b/keyboards/alu84/config.h deleted file mode 100755 index 130e2f1b405..00000000000 --- a/keyboards/alu84/config.h +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2017 @TurboMech /u/TurboMech @A9entOran9e#6134 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef ALU84_CONFIG_H -#define ALU84_CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xCA75 -#define DEVICE_VER 0x0001 -#define MANUFACTURER MECHKEYS -#define PRODUCT ALU84 -#define DESCRIPTION 75% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, B7 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, F5, D4, B1, B0, B5, B4, D7, D6, B3, F4, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B6 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 10 -#define RGBLIGHT_VAL_STEP 10 - -#define RGBLIGHT_ANIMATIONS - -#endif - -#endif diff --git a/keyboards/alu84/info.json b/keyboards/alu84/info.json deleted file mode 100644 index 97f2b5facca..00000000000 --- a/keyboards/alu84/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "ALU84", - "url": "", - "maintainer": "qmk", - "width": 16, - "height": 6, - "layouts": { - "LAYOUT": { - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K015", "x":15, "y":0}, {"label":"K100", "x":0, "y":1}, {"label":"K101", "x":1, "y":1}, {"label":"K102", "x":2, "y":1}, {"label":"K103", "x":3, "y":1}, {"label":"K104", "x":4, "y":1}, {"label":"K105", "x":5, "y":1}, {"label":"K106", "x":6, "y":1}, {"label":"K107", "x":7, "y":1}, {"label":"K108", "x":8, "y":1}, {"label":"K109", "x":9, "y":1}, {"label":"K110", "x":10, "y":1}, {"label":"K111", "x":11, "y":1}, {"label":"K112", "x":12, "y":1}, {"label":"K114", "x":13, "y":1, "w":2}, {"label":"K115", "x":15, "y":1}, {"label":"K200", "x":0, "y":2, "w":1.5}, {"label":"K202", "x":1.5, "y":2}, {"label":"K203", "x":2.5, "y":2}, {"label":"K204", "x":3.5, "y":2}, {"label":"K205", "x":4.5, "y":2}, {"label":"K206", "x":5.5, "y":2}, {"label":"K207", "x":6.5, "y":2}, {"label":"K208", "x":7.5, "y":2}, {"label":"K209", "x":8.5, "y":2}, {"label":"K210", "x":9.5, "y":2}, {"label":"K211", "x":10.5, "y":2}, {"label":"K212", "x":11.5, "y":2}, {"label":"K213", "x":12.5, "y":2}, {"label":"K214", "x":13.5, "y":2, "w":1.5}, {"label":"K215", "x":15, "y":2}, {"label":"K300", "x":0, "y":3, "w":1.75}, {"label":"K302", "x":1.75, "y":3}, {"label":"K303", "x":2.75, "y":3}, {"label":"K304", "x":3.75, "y":3}, {"label":"K305", "x":4.75, "y":3}, {"label":"K306", "x":5.75, "y":3}, {"label":"K307", "x":6.75, "y":3}, {"label":"K308", "x":7.75, "y":3}, {"label":"K309", "x":8.75, "y":3}, {"label":"K310", "x":9.75, "y":3}, {"label":"K311", "x":10.75, "y":3}, {"label":"K312", "x":11.75, "y":3}, {"label":"K313", "x":12.75, "y":3, "w":2.25}, {"label":"K315", "x":15, "y":3}, {"label":"K400", "x":0, "y":4, "w":2.25}, {"label":"K402", "x":2.25, "y":4}, {"label":"K403", "x":3.25, "y":4}, {"label":"K404", "x":4.25, "y":4}, {"label":"K405", "x":5.25, "y":4}, {"label":"K406", "x":6.25, "y":4}, {"label":"K407", "x":7.25, "y":4}, {"label":"K408", "x":8.25, "y":4}, {"label":"K409", "x":9.25, "y":4}, {"label":"K410", "x":10.25, "y":4}, {"label":"K411", "x":11.25, "y":4}, {"label":"K413", "x":12.25, "y":4, "w":1.75}, {"label":"K414", "x":14, "y":4}, {"label":"K415", "x":15, "y":4}, {"label":"K500", "x":0, "y":5, "w":1.25}, {"label":"K501", "x":1.25, "y":5, "w":1.25}, {"label":"K503", "x":2.5, "y":5, "w":1.25}, {"label":"K506", "x":3.75, "y":5, "w":6.25}, {"label":"K510", "x":10, "y":5}, {"label":"K511", "x":11, "y":5}, {"label":"K512", "x":12, "y":5}, {"label":"K513", "x":13, "y":5}, {"label":"K514", "x":14, "y":5}, {"label":"K515", "x":15, "y":5}] - } - } -} diff --git a/keyboards/alu84/keymaps/default/keymap.c b/keyboards/alu84/keymaps/default/keymap.c deleted file mode 100755 index 8c08010705f..00000000000 --- a/keyboards/alu84/keymaps/default/keymap.c +++ /dev/null @@ -1,109 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FN1 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* BL - * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . - * | Esc | Scrn Brght Up | Scrn Bright Down | Expose | Launchpad | Show Desktop | Dock Hide Tog | Screen Capture | Shortcut | Shortcut | Shortcut| Shortcut | Play/Pause | Mute | Vol Up | Vol Down | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | Backspace | POWER | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Shortcut | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Pg Up | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | Pg Dn | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Control | Option/Alt | Gui | Space | Gui | Opt | Fn (layer) | Left | Down | Right | - * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -' - */ - - [_BL] = LAYOUT( - KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)), - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - -/* FN1 - * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . - * | Quit All | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Trns | Trns | DFU RESET | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | DELETE | Lock Shrct | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Trns | RGB Toggle | RGB Mode | RGB Increase | RGB Decrease | RGB Hue Inc | RGB Hue Dec | RGB Sat Inc | RGB Sat Dec | Trns | Trns | Trns | Trns | Trns | Trns | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Trns | Backlight Tog | Backlight Inc | Backlight Dec | Backlight Step | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -' - */ - - [_FN1] = LAYOUT( - LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))), - KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/alu84/keymaps/turbomech/config.h b/keyboards/alu84/keymaps/turbomech/config.h deleted file mode 100644 index 3013df9ba7f..00000000000 --- a/keyboards/alu84/keymaps/turbomech/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2017 @TurboMech /u/TurboMech @A9entOran9e#6134 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#define TAPPING_TOGGLE 2 -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/alu84/keymaps/turbomech/keymap.c b/keyboards/alu84/keymaps/turbomech/keymap.c deleted file mode 100644 index b204a68657c..00000000000 --- a/keyboards/alu84/keymaps/turbomech/keymap.c +++ /dev/null @@ -1,176 +0,0 @@ -/* Copyright 2017 @TurboMech /u/TurboMech @A9entOran9e#6134 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - - -#include QMK_KEYBOARD_H -#include "turbomech.h" - -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -#define _QWERTY 0 //BASE layer -#define _FUNCTION 1 //Function layer - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* BL - * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. - * | Esc | Scrn | Scrn | Expose |Launchpad| Show |Dock Hide| Screen | Shortcut| Shortcut| Shortcut| Shortcut| Play | Mute | Vol Up | Vol Down| - * | |Brght Up | Brght Dn| | | Desktop | Toggle | Capture | | | | | Pause | | | | - * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | Backspace | POWER | - * | | | | | | | | | | | | | | | | - * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Shortcut| - * | | | | | | | | | | | | | | | | - * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -| - * | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Page | - * | | | | | | | | | | | | | | Up | - * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | Page | - * | | | | | | | | | | | | | | Down | - * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -| - * | Control | Option | Gui | Space | Gui | Opt | Fn | Left | Down | Right | - * | | /Alt | | | | Alt | | | | | - * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -' - */ - - [_QWERTY] = LAYOUT( - KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)), - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - -/* FN1 - SEE readme.md - * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. - * | Quit | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Trns | Trns | DFU | - * | All | | | | | | | | | | | | | | | Reset | - * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Delete | Lock | - * | | | | | | | | | | | | | | |Shortcut | - * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -| - * | Trns | RGB | RGB | RGB | RGB | RGB Hue | RGB Hue | RGB Sat | RGB Sat | Trns | Trns | Trns | Trns | Trns | Trns | - * | | Toggle | Mode | Increase| Decrease| Increase| Decrease| Increase| Decrease| | | | | | | - * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * | | | | | | | | | | | | | | | - * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+ - * | Trns |Backlight|Backlight|Backlight|Backlight| Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * | | Toggle | Increase| Decrease| Step | | | | | | | | | | - * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -| - * | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | - * | | | | | | | | | | | - * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -' - */ - - - [_FUNCTION] = LAYOUT( - LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))), - KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - //switch (id) { - // case _FLIP: - // if (record->event.pressed) - - //SEND_STRING("(╯°□°）╯︵ ┻━┻"); - // } - // return false; - // break; - // } - - return MACRO_NONE; -}; - - - -void matrix_scan_user(void) { -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/alu84/keymaps/turbomech/readme.md b/keyboards/alu84/keymaps/turbomech/readme.md deleted file mode 100644 index b78d7a5e7e8..00000000000 --- a/keyboards/alu84/keymaps/turbomech/readme.md +++ /dev/null @@ -1,93 +0,0 @@ -# This is u/TurboMech's keyboard layout for ALU84. - -## It is designed for Mac OS, due to the specific functions I created. - -### Here is the layout found in the keymap.c file. -##### I use shortcuts for the Function row (above number row) listed below - - Scrn Bright Up: F14 - - Scrn Bright Down: F15 - - Expose: LCTRL + Up - - Launchpad: LCTRL + L - - Show Desktop: F11 - - Show/Hide Dock: LALT + LGUI + D - - Screen Capture: LCTRL + S - - Custom Shortcut (setup for an application I use frequently): LCTRL + LSHFT + O - - Custom Shortcut 1: LCTRL + LGUI + 1 - - Custom Shortcut 2: LCTRL + LGUI + 2 - - Custom Shortcut 3: LCTRL + LGUI + 3 - - use the custom shortcuts for whatever you want: launch an application, a macro, etc. - - Play/Pause: exactly that - - Mute / Volume Up / Volume Down: exactly what it says - - ##### Going down the right side from Vol Down: - - POWER: this serves as the power button on Mac's only. Press and hold the button as you would on your Macbook or iMac keyboard. - - Menu: this slides the notification bar on the right side (its the same as on iPhones/ iPads) - -### See below keymaps for how to setup shortcuts on Mac - -#### Base Layer -``` -.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. -| Esc | Scrn | Scrn | Expose |Launchpad| Show |Dock Hide| Screen | Shortcut| Shortcut| Shortcut| Shortcut| Play | Mute | Vol Up | Vol Down| -| |Brght Up | Brght Dn| | | Desktop | Toggle | Capture | | | | | Pause | | | | -|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -| -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | Backspace | POWER | -| | | | | | | | | | | | | | | | -|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -| -| TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Shortcut| -| | | | | | | | | | | | | | | | -|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -| -| CAPS | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Page | -| | | | | | | | | | | | | | Up | -|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+ -| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | Page | -| | | | | | | | | | | | | | Down | -|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -| -| Control | Option | Gui | Space | Gui | Opt | Fn | Left | Down | Right | -| | /Alt | | | | Alt | | | | | -'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -' -``` -#### Function Layer 1 - See above for shortcuts -``` -.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. -| Quit | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Trns | Trns | DFU | -| All | | | | | | | | | | | | | | | Reset | -|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -| -| Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Delete | Lock | -| | | | | | | | | | | | | | |Shortcut | -|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -| -| Trns | RGB | RGB | RGB | RGB | RGB Hue | RGB Hue | RGB Sat | RGB Sat | Trns | Trns | Trns | Trns | Trns | Trns | -| | Toggle | Mode | Increase| Decrease| Increase| Decrease| Increase| Decrease| | | | | | | -|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -| -| Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | -| | | | | | | | | | | | | | | -|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+ -| Trns |Backlight|Backlight|Backlight|Backlight| Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | -| | Toggle | Increase| Decrease| Step | | | | | | | | | | -|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -| -| Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | Trns | -| | | | | | | | | | | -'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -' -``` - -#### How to use/ setup shortcuts on Mac -- First navigate to System Preferences > Keyboard > Shortcuts - - You can use any of them in here - - Just set them to the shortcut keys listed above - -#### How to make your own (to launch applications, quit all, etc.) -- Navigate to Automator > New Document > click Service > Choose -- Now we have to setup our shortcut - - Here's how to setup the Quit All Shortcut - - In the right window select the Service recieves dropdown > select No Input - - At the top left click the Name (Search) > type quit > click and hold Quit All Applications > drag to the right hand box (under the Service Recieves) - - **IMPORTANT** You have to click the Run button at the upper right hand corner in order for these to actually work. - - Now click File > Save > save it as Quit All Apps (or whatever you want) / you can also just exit out and it'll ask you if you want to save -- Navigate back to System Preferences > Keyboard > Shortcuts - - The new shortcut can be found under services, set it to one of the shortcuts I listed above and done -- The same applies for applications in the Name (search) just type the application you want to have as shortcut. Don't forget to run it, then do the same steps - to set it up as a shortcut. - - - - diff --git a/keyboards/alu84/keymaps/turbomech/rules.mk b/keyboards/alu84/keymaps/turbomech/rules.mk deleted file mode 100644 index c8b74bfc9a0..00000000000 --- a/keyboards/alu84/keymaps/turbomech/rules.mk +++ /dev/null @@ -1,12 +0,0 @@ -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= yes -UNICODE_ENABLE ?= yes - diff --git a/keyboards/alu84/readme.md b/keyboards/alu84/readme.md deleted file mode 100644 index f98addd0bfb..00000000000 --- a/keyboards/alu84/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -ALU84 -=== - -![alu84](https://i.imgur.com/wBfazDc.jpg) - -A 75% keyboard made and sold by MECHKEYS [More info on MECHKEYS](https://mechkeys.ca). - -Keyboard Maintainer: [TurboMech](https://github.com/TurboMech) -Hardware Supported: ALU84 -Hardware Availability: [MECHKEYS](https://mechkeys.ca) - -Make example for this keyboard (after setting up your build environment): - - make alu84:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/alu84/rules.mk b/keyboards/alu84/rules.mk deleted file mode 100755 index 14d3e70898f..00000000000 --- a/keyboards/alu84/rules.mk +++ /dev/null @@ -1,56 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= no # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= yes \ No newline at end of file diff --git a/keyboards/amj40/amj40.c b/keyboards/amj40/amj40.c deleted file mode 100755 index 5a237699912..00000000000 --- a/keyboards/amj40/amj40.c +++ /dev/null @@ -1,30 +0,0 @@ -#include "amj40.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB |= (1<<2); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6072 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Han Chen -#define PRODUCT AMJ40 -#define DESCRIPTION qmk port of AMJ40 v2 PCB - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS { F4, F5, F6, F7} -#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -/* Underlight configuration - */ - -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/amj40/info.json b/keyboards/amj40/info.json deleted file mode 100644 index ddbd34a7c4f..00000000000 --- a/keyboards/amj40/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "AMJ40", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2, "w":1.25}, {"x":11, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":2.25}, {"x":5.75, "y":3, "w":2.75}, {"x":8.5, "y":3, "w":1.25}, {"x":9.75, "y":3}, {"x":10.75, "y":3, "w":1.25}] - } - } -} diff --git a/keyboards/amj40/keymaps/default/build.sh b/keyboards/amj40/keymaps/default/build.sh deleted file mode 100755 index 6b4b4568f54..00000000000 --- a/keyboards/amj40/keymaps/default/build.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash -# adjust for cpu -# -j 16 gave best result on a hyperthreaded quad core core i7 - -LIMIT=10 -THREADS="-j 16" -KMAP=iso_split_rshift - -echo "We need sudo later" -sudo ls 2>&1 /dev/null - -function wait_bootloader { - echo "Waiting for Bootloader..." - local STARTTIME=$(date +"%s") - local REMIND=0 - local EXEC=dfu-programmer - local TARGET=atmega32u4 - while true - do - sudo $EXEC $TARGET get > /dev/null 2>&1 - [ $? -eq 0 ] && break - ENDTIME=$(date +"%s") - DURATION=$(($ENDTIME-$STARTTIME)) - if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] - then - echo "Did you forget to press the reset button?" - REMIND=1 - fi - sleep 1 - done -} -make clean -make KEYMAP=${KMAP} ${THREADS} -if [[ $? -eq 0 ]] -then - echo "please trigger flashing!" - wait_bootloader - sudo make KEYMAP=${KMAP} dfu ${THREADS} -else - echo "make failed" - exit 77 -fi diff --git a/keyboards/amj40/keymaps/default/keymap.c b/keyboards/amj40/keymaps/default/keymap.c deleted file mode 100755 index 884fb761d45..00000000000 --- a/keyboards/amj40/keymaps/default/keymap.c +++ /dev/null @@ -1,145 +0,0 @@ - - - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 3 - - - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Default Layer - * ,-----------------------------------------------------------. - * | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | - * |-----------------------------------------------------------| - * | Tab | A | S | D | F | G | H | J | K | L | Ent | - * |-----------------------------------------------------------| - * | LSft | Z | X | C | V | B | N | M | , | . | /? | - * |-----------------------------------------------------------| - * | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl | - * `-----------------------------------------------------------' - */ - [_QWERTY] = LAYOUT( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\ - KC_LCTL, KC_LGUI, KC_LALT, LT(_LOWER, KC_SPC),LT(_RAISE, KC_SPC),LT(_ADJUST, KC_LGUI), KC_RALT, KC_RCTL \ - ), - - /* Function Layer 1 HHKB style - * ,-----------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bkspc| - * |-----------------------------------------------------------| - * | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | Pipe | - * |-----------------------------------------------------------| - * | F7 | F8 | F9 | F10 | F11 | F12 | End|PgDn| ↓ | | | - * |-----------------------------------------------------------| - * | | | | | | Stop| App| | - * `-----------------------------------------------------------' - */ - [_LOWER] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \ - _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Function Layer 1 HHKB style - * ,-----------------------------------------------------------. - * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| - * |-----------------------------------------------------------| - * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | - * |-----------------------------------------------------------| - * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | - * |-----------------------------------------------------------| - * | | | | | | Stop| App| | - * `-----------------------------------------------------------' - */ - [_RAISE] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \ - _______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \ - ), - - /* Function Layer 1 HHKB style - * ,-----------------------------------------------------------. - * |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| - * |-----------------------------------------------------------| - * | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | - * |-----------------------------------------------------------| - * | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | - * |-----------------------------------------------------------| - * | | | | | | Stop| App| | - * `-----------------------------------------------------------' - */ - [_ADJUST] = LAYOUT( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, \ - _______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, \ - KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \ - ), - - - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - - return MACRO_NONE; -}; - - - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - - switch (keycode) { - - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/amj40/keymaps/default/readme.md b/keyboards/amj40/keymaps/default/readme.md deleted file mode 100755 index 2659292ae54..00000000000 --- a/keyboards/amj40/keymaps/default/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -AMJ40 Default Layout -===================== - -##Quantum MK Firmware -For the full Quantum feature list, see the parent readme.md. - -# Features -* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers. -* View the keymap.c file to understand they layout of the keymap. -* Has keys to toggle both the switch LEDs and underglow LEDs. - diff --git a/keyboards/amj40/keymaps/default/rules.mk b/keyboards/amj40/keymaps/default/rules.mk deleted file mode 100644 index cbfa35e6310..00000000000 --- a/keyboards/amj40/keymaps/default/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/amj40/keymaps/default/updatemerge.sh b/keyboards/amj40/keymaps/default/updatemerge.sh deleted file mode 100755 index da5457e1953..00000000000 --- a/keyboards/amj40/keymaps/default/updatemerge.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash -git checkout amj60 # gets you on branch amj60 -git fetch origin # gets you up to date with origin -git merge origin/master diff --git a/keyboards/amj40/keymaps/fabian/keymap.c b/keyboards/amj40/keymaps/fabian/keymap.c deleted file mode 100755 index 360424f300d..00000000000 --- a/keyboards/amj40/keymaps/fabian/keymap.c +++ /dev/null @@ -1,228 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Set the custom keymap -#undef LAYOUT -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k39, k3a, k3b \ -) { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b}, \ - {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \ - {k30, k31, k32, k33, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \ -} - -extern keymap_config_t keymap_config; - -enum custom_layers { - _QWERTY, - _COLEMAK, - _DVORAK, - _LOWER, - _RAISE, - _ADJUST -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - BACKLIT, - EXT_PLV -}; - -#define CTL_ESC CTL_T(KC_ESC) // Tap for Escape, hold for Control -#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) -#define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) -#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift -#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -#define SFT_SPC SFT_T(KC_SPC) // Tap for Space, hold for Shift -#define UMLAUT RALT(KC_U) // Combine Alt and U - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Meh | Alt | GUI | Lower and Space | Raise | GUI |AltGr | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT( \ - HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \ - KC_LCTL, MEH_GRV, KC_LALT, KC_LGUI, F(0), RAISE, KC_RGUI, KC_RALT, KC_RCTL \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Meh | Alt | GUI | Lower and Space | Raise | GUI |AltGr | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT( \ - HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - SFT_BSP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \ - KC_LCTL, MEH_GRV, KC_LALT, KC_LGUI, F(0), RAISE, KC_RGUI, KC_RALT, KC_RCTL \ -), - -/* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Meh | Alt | GUI | Lower and Space | Raise | GUI |AltGr | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT( \ - HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - SFT_BSP, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, \ - KC_LCTL, MEH_GRV, KC_LALT, KC_LGUI, F(0), RAISE, KC_RGUI, KC_RALT, KC_RCTL \ -), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | MS L | MS D |MS U | MS R |MS Btn| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, \ - _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | Left | Down | Up | Rght |MS_BN2| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BTN2, \ - _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | Reset| Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = LAYOUT( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_DEL, \ - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} diff --git a/keyboards/amj40/keymaps/fabian/rules.mk b/keyboards/amj40/keymaps/fabian/rules.mk deleted file mode 100644 index 90559e0dd22..00000000000 --- a/keyboards/amj40/keymaps/fabian/rules.mk +++ /dev/null @@ -1,19 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/amj40/keymaps/jetpacktuxedo/config.h b/keyboards/amj40/keymaps/jetpacktuxedo/config.h deleted file mode 100644 index 73118332013..00000000000 --- a/keyboards/amj40/keymaps/jetpacktuxedo/config.h +++ /dev/null @@ -1 +0,0 @@ -#define PERMISSIVE_HOLD diff --git a/keyboards/amj40/keymaps/jetpacktuxedo/keymap.c b/keyboards/amj40/keymaps/jetpacktuxedo/keymap.c deleted file mode 100755 index caf6700bc39..00000000000 --- a/keyboards/amj40/keymaps/jetpacktuxedo/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Default Layer - [0] = LAYOUT( \ - KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ - LT(2, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(2, KC_ENT),\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MT(MOD_RSFT, KC_SLSH),\ - KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(1, KC_SPC), KC_RALT, MO(3), KC_RCTL \ - ), - - // Number Layer - [1] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_TRNS, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, MT(MOD_RSFT, KC_BSLS), \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\ - ), - - // Shifted Layer - [2] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,\ - KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PIPE, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\ - ), - - // Fkey Layer - [3] = LAYOUT( \ - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,\ - KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\ - ), - - // Gaming Layer - [4] = LAYOUT( \ - KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,\ - KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\ - ), -}; diff --git a/keyboards/amj40/keymaps/jetpacktuxedo/readme.md b/keyboards/amj40/keymaps/jetpacktuxedo/readme.md deleted file mode 100755 index 64ae16c7eb8..00000000000 --- a/keyboards/amj40/keymaps/jetpacktuxedo/readme.md +++ /dev/null @@ -1,55 +0,0 @@ -Jetpacktuxedo's AMJ40 layout -===================== - -This is based heavily on my minivan layout, with most difference stemming from the different widths between the minivan and the AMJ40. ![Image of my specific layout](https://i.imgur.com/B9XraJY.jpg) - -## Base Layer (0) - -The base layer is pretty simple, straight qwerty layout where available. Both spacebars go to layer 1 when held. `tab` is `tab` when pressed and `fn2` when held, `enter` is the same. `GESC` is `esc` when used alone, but `~` when shifted. `/` is `/` when tapped but `rshift` when held. -``` -|GESC| Q | W | E | R | T | Y | U | I | O | P |BSPC| -| TAB | A | S | D | F | G | H | J | K | L | ENTER | -|LSHIFT | Z | X | C | V | B | N | M | , | . | / | -|LCTRL|LWIN|LALT | SPACE | SPACE |RALT |FN 3|RCTRL | -``` - -## Number Layer (1) - -Numbers are set up just like on my minivan layout, but symbols are a bit different because the AMJ40 is one key narrower than the minivan and also lacks dedicated arrows. Decided to go with `hjkl` arrows, which takes some getting used to. `;` is on a layer now because of the narrowness I mentioned before, and it (along with `-`, `=`, and `'`) moves to the right hand to leave room for the `hjkl` arrows. `delete` on `backspace`, `[` and `]` on `<` and `>`, and `\` on `/` are all stolen straight from my minivan layout. -``` -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |DEL | -| | - | = | ; | ' | | ← | ↓ | ↑ | → | | -| | | | | | | | | [ | ] | \ | -| | | | | | | | | -``` - -## Shifted Layer (2) - -I don't want to be using two key combos constantly, so I also added this symbol layer that is basically shift+numeric layer. Also has nav keys on top of where arrows sit on the previous layer -``` -| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) |DEL | -| | _ | + | : | " | |HOME|PGDN|PGUP|END | | -| | | | | | | | | { | } | | | -| | | | | | | | | -``` - -## Fkey Layer (3) - -Honestly, I use this more for jumping to my gaming layer and for reset than I use it for Fkeys. Lol. Hitting the left windows key while in this layer locks the gaming layer listed below -``` -| | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |RSET| -| |F11 |F12 | | | | | | | | | -| | | | | | | | | | | | -| |FN 4| | | | | | | -``` - -## "Gaming" Layer (4) - -Based on the "gaming" layer on my minivan that I mostly just use for mouse keys. To toggle this back off you hit the right windows key (to go to layer 3) and then the left windows key again. -``` -|ESC | | | | | |MWUP|MLCK|M UP|MRCK| | | -| TAB | | | | | |MWDN|M L |M DN|M R | | -| | | | | | | | | | | | -| | | | SPACE | | | | | -``` - diff --git a/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk b/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk deleted file mode 100644 index 2b613b28e4b..00000000000 --- a/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk +++ /dev/null @@ -1,19 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/amj40/keymaps/myee/build.sh b/keyboards/amj40/keymaps/myee/build.sh deleted file mode 100644 index 6b4b4568f54..00000000000 --- a/keyboards/amj40/keymaps/myee/build.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash -# adjust for cpu -# -j 16 gave best result on a hyperthreaded quad core core i7 - -LIMIT=10 -THREADS="-j 16" -KMAP=iso_split_rshift - -echo "We need sudo later" -sudo ls 2>&1 /dev/null - -function wait_bootloader { - echo "Waiting for Bootloader..." - local STARTTIME=$(date +"%s") - local REMIND=0 - local EXEC=dfu-programmer - local TARGET=atmega32u4 - while true - do - sudo $EXEC $TARGET get > /dev/null 2>&1 - [ $? -eq 0 ] && break - ENDTIME=$(date +"%s") - DURATION=$(($ENDTIME-$STARTTIME)) - if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] - then - echo "Did you forget to press the reset button?" - REMIND=1 - fi - sleep 1 - done -} -make clean -make KEYMAP=${KMAP} ${THREADS} -if [[ $? -eq 0 ]] -then - echo "please trigger flashing!" - wait_bootloader - sudo make KEYMAP=${KMAP} dfu ${THREADS} -else - echo "make failed" - exit 77 -fi diff --git a/keyboards/amj40/keymaps/myee/config.h b/keyboards/amj40/keymaps/myee/config.h deleted file mode 100644 index 8e6c4dfa430..00000000000 --- a/keyboards/amj40/keymaps/myee/config.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H -#include "../../config.h" - -#define TAPPING_TERM 25 -#define RETRO_TAPPING -#define PERMISSIVE_HOLD - - -#endif \ No newline at end of file diff --git a/keyboards/amj40/keymaps/myee/keymap.c b/keyboards/amj40/keymaps/myee/keymap.c deleted file mode 100644 index 7642ede34da..00000000000 --- a/keyboards/amj40/keymaps/myee/keymap.c +++ /dev/null @@ -1,110 +0,0 @@ - - - -#include QMK_KEYBOARD_H - -// Keymap myee -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 3 - - - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ - F(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ - KC_LCTL, KC_LGUI,KC_LALT, F(0), F(1), KC_RGUI,KC_RALT, KC_RCTL \ - ), - - [_LOWER] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_UP, KC_MINS, KC_EQL, KC_DEL, \ - _______, _______, KC_ASTR, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQUO, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSLS, \ - _______, _______, _______, KC_LPRN, KC_RPRN, KC_HOME, KC_PGUP, KC_PGDN, KC_END, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______ \ - ), - - [_RAISE] = LAYOUT( \ - KC_GRV, KC_LPRN, KC_RPRN, KC_DQUO, KC_QUOT, KC_SCLN, KC_COLON,KC_UNDS, KC_PLUS, _______, _______, KC_BSPC, \ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - _______, _______, _______, KC_LCBR, KC_RCBR, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, BL_INC, BL_DEC \ - ), - - [_ADJUST] = LAYOUT( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \ - ), - -}; - -enum function_id { - LAUNCH, - RGBLED_TOGGLE, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), - [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), - [2] = ACTION_LAYER_TAP_KEY(_ADJUST,KC_TAB), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - - return MACRO_NONE; -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - - switch (keycode) { - - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/amj40/keymaps/myee/readme.md b/keyboards/amj40/keymaps/myee/readme.md deleted file mode 100644 index 2659292ae54..00000000000 --- a/keyboards/amj40/keymaps/myee/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -AMJ40 Default Layout -===================== - -##Quantum MK Firmware -For the full Quantum feature list, see the parent readme.md. - -# Features -* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers. -* View the keymap.c file to understand they layout of the keymap. -* Has keys to toggle both the switch LEDs and underglow LEDs. - diff --git a/keyboards/amj40/keymaps/myee/rules.mk b/keyboards/amj40/keymaps/myee/rules.mk deleted file mode 100644 index fe07e43d823..00000000000 --- a/keyboards/amj40/keymaps/myee/rules.mk +++ /dev/null @@ -1,19 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/amj40/keymaps/myee/updatemerge.sh b/keyboards/amj40/keymaps/myee/updatemerge.sh deleted file mode 100644 index da5457e1953..00000000000 --- a/keyboards/amj40/keymaps/myee/updatemerge.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash -git checkout amj60 # gets you on branch amj60 -git fetch origin # gets you up to date with origin -git merge origin/master diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md deleted file mode 100755 index fbf1d9f2299..00000000000 --- a/keyboards/amj40/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -AMJ40 -=== - -DIY/Assembled compact 40% keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: AMJ40 PCB -Hardware Availability: https://geekhack.org/index.php?topic=87961.0 - -Make example for this keyboard (after setting up your build environment): - - make amj40:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk deleted file mode 100755 index 18403ac3280..00000000000 --- a/keyboards/amj40/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c deleted file mode 100644 index 993a5917dbd..00000000000 --- a/keyboards/amj60/amj60.c +++ /dev/null @@ -1,30 +0,0 @@ -#include "amj60.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB |= (1<<2); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6066 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Han Chen -#define PRODUCT AMJ60 -#define DESCRIPTION qmk port of AMJ60 PCB - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5} -#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -/* Underlight configuration - */ - -#define RGB_DI_PIN E2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/amj60/info.json b/keyboards/amj60/info.json deleted file mode 100644 index dd6a7aef0dd..00000000000 --- a/keyboards/amj60/info.json +++ /dev/null @@ -1,27 +0,0 @@ -{ - "keyboard_name": "AMJ60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0}, {"label":"k49", "x":14, "y":0}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":2, "w":1.25}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3c", "x":12.25, "y":3, "w":1.75}, {"label":"k3d", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_60_ansi": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0, "w":2}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2d", "x":12.75, "y":2, "w":2.25}, {"label":"k30", "x":0, "y":3, "w":2.25}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":2.75}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_hhkb": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0}, {"label":"k49", "x":14, "y":0}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2d", "x":12.75, "y":2, "w":2.25}, {"label":"k30", "x":0, "y":3, "w":2.25}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_iso": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0, "w":2}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":2, "w":1.25}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":2.75}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_iso_splitrshift": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0, "w":2}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":2, "w":1.25}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_max": { - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0}, {"label":"k49", "x":14, "y":0}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2d", "x":12.75, "y":2, "w":2.25}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}] - } - } -} diff --git a/keyboards/amj60/keymaps/default/keymap.c b/keyboards/amj60/keymaps/default/keymap.c deleted file mode 100644 index c5dc25018c8..00000000000 --- a/keyboards/amj60/keymaps/default/keymap.c +++ /dev/null @@ -1,55 +0,0 @@ - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DEF 0 -#define _SPC 1 - -// dual-role shortcuts -#define SPACEDUAL LT(_SPC, KC_SPACE) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _DEF: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \ | ~ | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| bspc| - * |-----------------------------------------------------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '| Return | - * |-----------------------------------------------------------| - * |Sft | Fn0| Z| X| C| V| B| N| M| ,| .| /| Sft |Fn2| - * |-----------------------------------------------------------| - * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| - * `-----------------------------------------------------------' - */ - [_DEF] = LAYOUT_max( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, F(0), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, F(1), \ - KC_LCTL, KC_LALT, KC_LGUI, SPACEDUAL, KC_RGUI, KC_RALT, KC_RCTL, F(2)), - - /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) - * ,-----------------------------------------------------------. - * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | - * |-----------------------------------------------------------| - * | |Paus| Up| [ | ] | | | | ( | ) | | | | Del | - * |-----------------------------------------------------------| - * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | - * |-----------------------------------------------------------| - * | | | | | < | > | |M0 | | | | | Vol+ | | - * |-----------------------------------------------------------| - * | | | | |Alt |Prev|Vol-|Next| - * `-----------------------------------------------------------' - */ - [_SPC] = LAYOUT_max( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ - _______, KC_PAUS, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, KC_MPLY, \ - _______, _______, _______, _______, _______, _______, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ - _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), - -}; diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh deleted file mode 100755 index 6b4b4568f54..00000000000 --- a/keyboards/amj60/keymaps/iso_split_rshift/build.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash -# adjust for cpu -# -j 16 gave best result on a hyperthreaded quad core core i7 - -LIMIT=10 -THREADS="-j 16" -KMAP=iso_split_rshift - -echo "We need sudo later" -sudo ls 2>&1 /dev/null - -function wait_bootloader { - echo "Waiting for Bootloader..." - local STARTTIME=$(date +"%s") - local REMIND=0 - local EXEC=dfu-programmer - local TARGET=atmega32u4 - while true - do - sudo $EXEC $TARGET get > /dev/null 2>&1 - [ $? -eq 0 ] && break - ENDTIME=$(date +"%s") - DURATION=$(($ENDTIME-$STARTTIME)) - if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] - then - echo "Did you forget to press the reset button?" - REMIND=1 - fi - sleep 1 - done -} -make clean -make KEYMAP=${KMAP} ${THREADS} -if [[ $? -eq 0 ]] -then - echo "please trigger flashing!" - wait_bootloader - sudo make KEYMAP=${KMAP} dfu ${THREADS} -else - echo "make failed" - exit 77 -fi diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c deleted file mode 100644 index 0c5dc6b880a..00000000000 --- a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c +++ /dev/null @@ -1,131 +0,0 @@ - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DEF 0 -#define _SPC 1 -#define _TAB 2 -#define _SFX 3 - -// dual-role shortcuts -#define TABDUAL LT(_TAB, KC_TAB) -#define CAPSDUAL CTL_T(KC_ESC) -#define SPACEDUAL LT(_SPC, KC_SPACE) -#define ENTERDUAL CTL_T(KC_ENT) -// arrow cluster duality bottom right corner -#define ARRLEFT ALT_T(KC_LEFT) -#define ARRDOWN GUI_T(KC_DOWN) -#define ARRUP SFT_T(KC_UP) -#define ARRRIGHT CTL_T(KC_RIGHT) -// german brackets -#define GER_CUR_L RALT(KC_7) // [ -#define GER_CUR_R RALT(KC_0) // ] -#define GER_PAR_L LSFT(KC_8) // ( -#define GER_PAR_R LSFT(KC_9) // ) -#define GER_ANG_L KC_NUBS // < -#define GER_ANG_R LSFT(KC_NUBS) // > -#define GER_BRC_L RALT(KC_8) // [ -#define GER_BRC_R RALT(KC_9) // ] - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _DEF: Default Layer - * ,-----------------------------------------------------------. - * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 - * |-----------------------------------------------------------| - * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | - * |-----------------------------------------------------------| - * |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP - * |-----------------------------------------------------------| - * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is - * `-----------------------------------------------------------' LEFT DWN RIGHT - */ - [_DEF] = LAYOUT_iso_splitrshift( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ - KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), - - /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) - * ,-----------------------------------------------------------. - * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| - * |-----------------------------------------------------------| - * | |Paus| Up| [ | ] | | | | ( | ) | | | | | - * |-----------------------------------------------------------| - * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | - * |-----------------------------------------------------------| - * | | | | | < | > | |M0 | | | | | Vol+ | | - * |-----------------------------------------------------------| - * | | | | |Alt |Prev|Vol-|Next| - * `-----------------------------------------------------------' - */ - [_SPC] = LAYOUT_iso_splitrshift( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - _______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ - _______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ - _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), - - /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) - * ,-----------------------------------------------------------. - * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE - * |-----------------------------------------------------------| - * | | | | | | | | | { | } | | | | | - * |-----------------------------------------------------------| - * | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | - * |-----------------------------------------------------------| - * | | | | | | | |AF2| | | | | PgUp | | - * |-----------------------------------------------------------| - * | | | | |Alt |Pos1|PgDn|End | - * `-----------------------------------------------------------' - */ - [_TAB] = LAYOUT_iso_splitrshift( - KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ - _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ - _______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) - * ,-----------------------------------------------------------. - * |RSET| | | | | | | 7| 8| 9| | | |Backsp | - * |-----------------------------------------------------------| - * | | | | | | | | 4 | 5 | 6 | | | | \ | - * |-----------------------------------------------------------| - * | | L | L | | | | | 1 | 2 | 3 | | | Return | - * |-----------------------------------------------------------| - * | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent - * |-----------------------------------------------------------| LED controlling - * |Ctrl|Win |Alt | |Alt |Left|Down|Right| - * `-----------------------------------------------------------' - */ - [_SFX] = LAYOUT_iso_splitrshift( - RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ - _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ - _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ - _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - return (record->event.pressed ? - MACRO( D(RALT), T(SPC), U(RALT), END ) - :MACRO( END )); - break; - case 1: - return (record->event.pressed ? - MACRO( D(LALT), T(F2), U(LALT), END ) - :MACRO( END )); - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md deleted file mode 100644 index 2113d93e4d5..00000000000 --- a/keyboards/amj60/keymaps/iso_split_rshift/readme.md +++ /dev/null @@ -1,30 +0,0 @@ -toneman77's custom spacefn Layout -===================== - -##Quantum MK Firmware -For the full Quantum feature list, see the parent readme.md. - -# Features -* heavily modified ISO (!) layout with split right shift key -* spaceFn -* Dual-Role keys: -* - | Original key | when tapped | when held | - | ---------------- | ------------- | ------------- | - | Space | Space | layer change | - | Caps lock | Escape | Control | - | Tab | Tab | layer change | - | Enter | Enter | Control | - -* vim-style arrow keys on hjkl (spacefn layer) -* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) -* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift -* more bonus arrow keys on wasd (spacefn layer) -* media keys prev/next/play/vol+/vol- (spacefn layer) -* firmware bootloader button -* additional brackets that only work in german layout due to horrible placement -in the default qwertz layout - - -### Additional Credits -* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys) diff --git a/keyboards/amj60/keymaps/iso_split_rshift/rules.mk b/keyboards/amj60/keymaps/iso_split_rshift/rules.mk deleted file mode 100644 index 1b34f4f6060..00000000000 --- a/keyboards/amj60/keymaps/iso_split_rshift/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh deleted file mode 100755 index da5457e1953..00000000000 --- a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash -git checkout amj60 # gets you on branch amj60 -git fetch origin # gets you up to date with origin -git merge origin/master diff --git a/keyboards/amj60/keymaps/maximized/keymap.c b/keyboards/amj60/keymaps/maximized/keymap.c deleted file mode 100644 index c5dc25018c8..00000000000 --- a/keyboards/amj60/keymaps/maximized/keymap.c +++ /dev/null @@ -1,55 +0,0 @@ - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DEF 0 -#define _SPC 1 - -// dual-role shortcuts -#define SPACEDUAL LT(_SPC, KC_SPACE) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _DEF: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \ | ~ | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| bspc| - * |-----------------------------------------------------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '| Return | - * |-----------------------------------------------------------| - * |Sft | Fn0| Z| X| C| V| B| N| M| ,| .| /| Sft |Fn2| - * |-----------------------------------------------------------| - * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| - * `-----------------------------------------------------------' - */ - [_DEF] = LAYOUT_max( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, F(0), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, F(1), \ - KC_LCTL, KC_LALT, KC_LGUI, SPACEDUAL, KC_RGUI, KC_RALT, KC_RCTL, F(2)), - - /* Keymap 1: F-and-vim Layer, modified with Space (by holding space) - * ,-----------------------------------------------------------. - * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | - * |-----------------------------------------------------------| - * | |Paus| Up| [ | ] | | | | ( | ) | | | | Del | - * |-----------------------------------------------------------| - * | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | - * |-----------------------------------------------------------| - * | | | | | < | > | |M0 | | | | | Vol+ | | - * |-----------------------------------------------------------| - * | | | | |Alt |Prev|Vol-|Next| - * `-----------------------------------------------------------' - */ - [_SPC] = LAYOUT_max( - KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ - _______, KC_PAUS, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, KC_MPLY, \ - _______, _______, _______, _______, _______, _______, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ - _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), - -}; diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md deleted file mode 100644 index 394f8645622..00000000000 --- a/keyboards/amj60/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -AMJ60 -=== - -A 60% keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: AMJ60 -Hardware Availability: https://geekhack.org/index.php?topic=77636.0 - -Make example for this keyboard (after setting up your build environment): - - make amj60:maximized - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk deleted file mode 100644 index 0df13d3062f..00000000000 --- a/keyboards/amj60/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = 60_ansi \ No newline at end of file diff --git a/keyboards/amj96/amj96.c b/keyboards/amj96/amj96.c deleted file mode 100644 index 959e321c8f6..00000000000 --- a/keyboards/amj96/amj96.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2017 MechMerlin - - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "amj96.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/amj96/amj96.h b/keyboards/amj96/amj96.h deleted file mode 100644 index e8a83af0cb3..00000000000 --- a/keyboards/amj96/amj96.h +++ /dev/null @@ -1,46 +0,0 @@ -/* Copyright 2017 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef AMJ96_H -#define AMJ96_H - -#include "quantum.h" - -// readability -#define XXX KC_NO - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K09, K0A, K0C, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K0B, K0F, K6F, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K0D, K6D, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K6E, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K0E, K07, \ - K60, K61, K62, K63, K64, K65, K66, K68, K69, K6A, K6B, K6C \ -) { \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \ - { K60, K61, K62, K63, K64, K65, K66, XXX, K68, K69, K6A, K6B, K6C, K6D, K6E, K6F } \ -} - - -#endif diff --git a/keyboards/amj96/config.h b/keyboards/amj96/config.h deleted file mode 100644 index 1f1be03ce29..00000000000 --- a/keyboards/amj96/config.h +++ /dev/null @@ -1,198 +0,0 @@ -/* -Copyright 2017 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6074 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Han Chen -#define PRODUCT AMJ96 -#define DESCRIPTION 96 key custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN D4 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* number of backlight levels */ -#ifdef BREATHING_LED_ENABLE -#ifdef FADING_LED_ENABLE -#define BACKLIGHT_LEVELS 8 -#else -#define BACKLIGHT_LEVELS 6 -#endif -#else -#define BACKLIGHT_LEVELS 3 -#endif -#define BACKLIGHT_CUSTOM - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGB_DI_PIN D3 - -#endif diff --git a/keyboards/amj96/info.json b/keyboards/amj96/info.json deleted file mode 100644 index bcee81b07b0..00000000000 --- a/keyboards/amj96/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "AMJ96", - "url": "", - "maintainer": "qmk", - "width": 19, - "height": 6, - "layouts": { - "LAYOUT": { - "key_count": 103, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Del", "x":16, "y":0}, {"label":"Page Up", "x":17, "y":0}, {"label":"Page Down", "x":18, "y":0}, {"label":"` ~", "x":0, "y":1}, {"label":"1 !", "x":1, "y":1}, {"label":"2 @", "x":2, "y":1}, {"label":"3 #", "x":3, "y":1}, {"label":"4 $", "x":4, "y":1}, {"label":"5 %", "x":5, "y":1}, {"label":"6 ^", "x":6, "y":1}, {"label":"7 &", "x":7, "y":1}, {"label":"8 *", "x":8, "y":1}, {"label":"9 (", "x":9, "y":1}, {"label":"0 )", "x":10, "y":1}, {"label":"- _", "x":11, "y":1}, {"label":"= +", "x":12, "y":1}, {"label":"Back Space", "x":13, "y":1}, {"label":"Back Space 2", "x":14, "y":1}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"[ {", "x":11.5, "y":2}, {"label":"] }", "x":12.5, "y":2}, {"label":"\\ |", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":"; :", "x":10.75, "y":3}, {"label":"' \"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"ISO \\", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":", <", "x":9.25, "y":4}, {"label":". >", "x":10.25, "y":4}, {"label":"/ ?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"GUI", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"label":"Space", "x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Fn", "x":11.5, "y":5, "w":1.5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}, {"label":"Enter", "x":18, "y":5}] - } - } -} diff --git a/keyboards/amj96/keymaps/default/config.h b/keyboards/amj96/keymaps/default/config.h deleted file mode 100644 index 0c01a85594d..00000000000 --- a/keyboards/amj96/keymaps/default/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2017 MechMerlin - - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - - -// place overrides here diff --git a/keyboards/amj96/keymaps/default/keymap.c b/keyboards/amj96/keymaps/default/keymap.c deleted file mode 100644 index 514c2166816..00000000000 --- a/keyboards/amj96/keymaps/default/keymap.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2017 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_INS, KC_DEL, KC_PGUP, KC_PGDN, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_FN0, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ - ), - - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/amj96/keymaps/default/readme.md b/keyboards/amj96/keymaps/default/readme.md deleted file mode 100644 index 478ab99669f..00000000000 --- a/keyboards/amj96/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for amj96 diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c deleted file mode 100644 index e41bbec728d..00000000000 --- a/keyboards/amj96/matrix.c +++ /dev/null @@ -1,222 +0,0 @@ -/* -Copyright 2014 Kai Ryu - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#ifdef UART_RGB_ENABLE -#include "uart_rgb.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void init_rows(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - -#ifdef UART_RGB_ENABLE - uart_rgb_init(); -#endif - // disable JTAG - MCUCR = _BV(JTD); - MCUCR = _BV(JTD); - - // 85 REST - DDRD |= _BV(PD7); - PORTD |= _BV(PD7); - - // initialize row and col - init_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0003 -#define MANUFACTURER AMJ -#define PRODUCT PAD -#define DESCRIPTION QMK keyboard firmware for AMJ PAD - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 } -#define MATRIX_COL_PINS { F1, F0, E6, C7 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -/* Underlight configuration - */ - -#define RGB_DI_PIN E2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/amjpad/info.json b/keyboards/amjpad/info.json deleted file mode 100644 index d362bc070f1..00000000000 --- a/keyboards/amjpad/info.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "keyboard_name": "AMJ Pad", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 6, - "layouts": { - "LAYOUT_numpad_6x4": { - "key_count": 21, - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}] - }, - "LAYOUT_ortho_6x4": { - "key_count": 24, - "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}] - } - } -} diff --git a/keyboards/amjpad/keymaps/default/keymap.c b/keyboards/amjpad/keymaps/default/keymap.c deleted file mode 100644 index 1c9122c9ec7..00000000000 --- a/keyboards/amjpad/keymaps/default/keymap.c +++ /dev/null @@ -1,59 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,-------------------. - * |Esc |TAB |BS | = | - * |----|----|----|----| - * | NL | / | * | - | - * |----|----|----|----| - * | 7 | 8 | 9 | | - * |----|----|----| + | - * | 4 | 5 | 6 | | - * |----|----|----|----| - * | 1 | 2 | 3 | | - * |----|----|----| En | - * | 0 |./FN| | - * `-------------------' - */ - - [_BL] = LAYOUT_numpad_6x4( - KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, LT(_FL,KC_PDOT), KC_PENT \ - ), - - /* Keymap _FL: Function Layer - * ,-------------------. - * |Esc |TAB |BS | = | - * |----|----|----|----| - * | NL | / | * | - | - * |----|----|----|----| - * | 7 | 8 | 9 | | - * |----|----|----|RST | - * | 4 | 5 | 6 | | - * |----|----|----|----| - * | 1 | 2 | 3 | | - * |----|----|----| En | - * | 0 |./FN| | - * `-------------------' - */ - [_FL] = LAYOUT_numpad_6x4( - KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, RESET, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, LT(_FL,KC_PDOT), KC_PENT \ - ), -}; diff --git a/keyboards/amjpad/keymaps/max/keymap.c b/keyboards/amjpad/keymaps/max/keymap.c deleted file mode 100644 index eb50567e987..00000000000 --- a/keyboards/amjpad/keymaps/max/keymap.c +++ /dev/null @@ -1,100 +0,0 @@ -#include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,-------------------. - * |Esc |Setp| - | = | - * |----|----|----|----| - * | F1 | F2 | F3 | F4 | - * |----|----|----|----| - * | 7 | 8 | 9 | - | - * |----|----|----|----| - * | 4 | 5 | 6 | LF | - * |----|----|----|----| - * | 1 | 2 | 3 | \ | - * |----|----|----|----| - * |Left|Down| Up |Rght| - * `-------------------' - */ - - [_BL] = LAYOUT_ortho_6x4( - KC_ESC, KC_TAB, KC_MINS,KC_EQL, \ - KC_F1, KC_F2, KC_F3, KC_F4, \ - KC_P7, KC_P8, KC_P9, KC_PMNS, \ - KC_P4, KC_P5, KC_P6, KC_PENT, \ - KC_P1, KC_P2, KC_P3, KC_BSLS, \ - KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT - ), - - /* Keymap _FL: Function Layer - * ,-------------------. - * |Esc |TAB |BS | = | - * |----|----|----|----| - * | NL | / | * | - | - * |----|----|----|----| - * | 7 | 8 | 9 | | - * |----|----|----|RST | - * | 4 | 5 | 6 | | - * |----|----|----|----| - * | 1 | 2 | 3 | | - * |----|----|----| En | - * | 0 |./FN| | - * `-------------------' - */ - [_FL] = LAYOUT_ortho_6x4( - KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, RESET, \ - KC_P4, KC_P5, KC_P6, KC_PENT, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT - ), -}; - -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/amjpad/keymaps/ortho_left/keymap.c b/keyboards/amjpad/keymaps/ortho_left/keymap.c deleted file mode 100644 index 815ac2a6818..00000000000 --- a/keyboards/amjpad/keymaps/ortho_left/keymap.c +++ /dev/null @@ -1,63 +0,0 @@ -#include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,-------------------. - * | T | G | B |Spac| - * |----|----|----|----| - * | R | F | V | Fn | - * |----|----|----|----| - * | E | D | C | OS | - * |----|----|----|----| - * | W | S | X | Alt| - * |----|----|----|----| - * | Q | A | Z | Ctl| - * |----|----|----|----| - * | Esc| Tab|Shft| Fn2| - * `-------------------' - */ - - [_BL] = LAYOUT_ortho_6x4( - KC_T, KC_G, KC_B, KC_SPACE,\ - KC_R, KC_F, KC_V, MO(1), \ - KC_E, KC_D, KC_C, KC_LGUI, \ - KC_W, KC_S, KC_X, KC_LALT, \ - KC_Q, KC_A, KC_Z, KC_LCTL, \ - KC_TAB, KC_ESC, KC_LSHIFT, MO(1) - ), - - /* Keymap _FL: Function Layer - * ,-------------------. - * | 5 | F5 | F11|Spac| - * |----|----|----|----| - * | 4 | F4 | F10| | - * |----|----|----|----| - * | 3 | F3 | F9 | OS | - * |----|----|----|----| - * | 2 | F2 | F8 | Alt| - * |----|----|----|----| - * | 1 | F1 | F7 | Ctl| - * |----|----|----|----| - * | ` | Del|Shft| | - * `-------------------' - */ - [_FL] = LAYOUT_ortho_6x4( - KC_5, KC_F5, KC_F11, _______, \ - KC_4, KC_F4, KC_F10, _______, \ - KC_3, KC_F3, KC_F9, _______, \ - KC_2, KC_F2, KC_F8, _______, \ - KC_1, KC_F1, KC_F7, _______, \ - KC_GRV,KC_DEL, _______, _______ - ), -}; diff --git a/keyboards/amjpad/keymaps/ortho_right/keymap.c b/keyboards/amjpad/keymaps/ortho_right/keymap.c deleted file mode 100644 index cbb81a2eabf..00000000000 --- a/keyboards/amjpad/keymaps/ortho_right/keymap.c +++ /dev/null @@ -1,62 +0,0 @@ -#include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,-------------------. - * |Spac| N | H | Y | - * |----|----|----|----| - * | Fn | M | J | U | - * |----|----|----|----| - * |Left| , | K | I | - * |----|----|----|----| - * |Down| . | L | O | - * |----|----|----|----| - * | Up | / | ; | P | - * |----|----|----|----| - * |Rght| Ret| " |Bspc| - * `-------------------' - */ - [_BL] = LAYOUT_ortho_6x4( - KC_SPACE, KC_N, KC_H, KC_Y, \ - MO(1), KC_M, KC_J, KC_U, \ - KC_LEFT, KC_COMM, KC_K, KC_I, \ - KC_DOWN, KC_DOT, KC_L, KC_O, \ - KC_UP, KC_SLASH, KC_SCLN, KC_P, \ - KC_RIGHT, KC_ENT, KC_QUOT, KC_BSPC - ), - - /* Keymap _FL: Function Layer - * ,-------------------. - * |Esc | F12| F6 | 6 | - * |----|----|----|----| - * | NL | M | - | 7 | - * |----|----|----|----| - * |Left| , | = | 8 | - * |----|----|----|----| - * |Down| . | [ | 9 | - * |----|----|----|----| - * | Up | / | ] | 0 | - * |----|----|----|----| - * |Rght| Ret| \ | Del| - * `-------------------' - */ - [_FL] = LAYOUT_ortho_6x4( - _______, KC_F12, KC_F6, KC_6, \ - _______, _______, KC_MINS, KC_7, \ - _______, _______, KC_EQL, KC_8, \ - _______, _______, KC_LBRC, KC_9, \ - _______, _______, KC_RBRC, KC_0, \ - _______, _______, KC_BSLS, KC_DEL - ), -}; diff --git a/keyboards/amjpad/readme.md b/keyboards/amjpad/readme.md deleted file mode 100644 index c069af25ade..00000000000 --- a/keyboards/amjpad/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -AMJ Pad -=== - -A DIY Keypad Kit - -Keyboard Maintainer: QMK Community -Hardware Supported: AMJ Pad -Hardware Availability: https://geekhack.org/index.php?topic=83546.0 - -Make example for this keyboard (after setting up your build environment): - - make amjpad:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk deleted file mode 100644 index f378a4ede20..00000000000 --- a/keyboards/amjpad/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/ares/ares.c b/keyboards/ares/ares.c deleted file mode 100644 index 85c7435edc3..00000000000 --- a/keyboards/ares/ares.c +++ /dev/null @@ -1,107 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ares.h" - -#ifdef RGBLIGHT_ENABLE - -#include -#include "i2c_master.h" -#include "rgblight.h" - -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} - -#endif - -#ifdef BACKLIGHT_ENABLE -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); -} - -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } -} -#endif - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); -} -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); -} -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -*/ \ No newline at end of file diff --git a/keyboards/ares/ares.h b/keyboards/ares/ares.h deleted file mode 100644 index 41ecb570c65..00000000000 --- a/keyboards/ares/ares.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2019 Maarten Dekkers - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - -#define XXX KC_NO - -#define LAYOUT( \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ - k00, k01, k02, k06, k0a, k0b, k0c, k0d \ -) \ -{ \ - {k00, k01, k02, XXX, XXX, XXX, k06, XXX, XXX, XXX, k0a, k0b, k0c, k0d, XXX}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ - {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \ - {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ - {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e} \ -} diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h deleted file mode 100644 index cca26aab3ee..00000000000 --- a/keyboards/ares/config.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define MANUFACTURER LSJ -#define PRODUCT QMK Firmware for Ares - -#define RGBLED_NUM 16 - -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } -#define UNUSED_PINS {} - -#define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - -#define NO_BACKLIGHT_CLOCK -#define BACKLIGHT_LEVELS 1 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ares/info.json b/keyboards/ares/info.json deleted file mode 100644 index 00911deb93c..00000000000 --- a/keyboards/ares/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "LSJ Ares", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Back space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - } - } -} \ No newline at end of file diff --git a/keyboards/ares/keymaps/default/keymap.c b/keyboards/ares/keymaps/default/keymap.c deleted file mode 100644 index 18e3d30b0d6..00000000000 --- a/keyboards/ares/keymaps/default/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2019 Maarten Dekkers - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -#define _MA 0 -#define _FN 1 - -#define ______ KC_TRNS - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL), -[_FN] = LAYOUT( - RGB_MOD, BL_TOGG, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, - ______, ______, ______, ______, ______, ______, ______, ______) - -}; diff --git a/keyboards/ares/readme.md b/keyboards/ares/readme.md deleted file mode 100644 index 338113a13aa..00000000000 --- a/keyboards/ares/readme.md +++ /dev/null @@ -1,42 +0,0 @@ -lSJ Ares -======== - -Keyboard Maintainer: QMK Community -Hardware Supported: LSJ Ares PCB -Hardware Availability: https://geekhack.org/index.php?topic=93146.0 - -Make example for this keyboard (after setting up your build environment): - - make ares:default - -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset by holding the left control key and plugging the cable in. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk deleted file mode 100644 index cd8edc61121..00000000000 --- a/keyboards/ares/rules.mk +++ /dev/null @@ -1,48 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = lite -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = yes -NO_UART = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ares/usbconfig.h b/keyboards/ares/usbconfig.h deleted file mode 100644 index 89b7ffbaab4..00000000000 --- a/keyboards/ares/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'L', 'S', 'J' -#define USB_CFG_VENDOR_NAME_LEN 3 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'A', 'r', 'e', 's' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/at101_blackheart/at101_blackheart.c b/keyboards/at101_blackheart/at101_blackheart.c deleted file mode 100644 index aa07a786436..00000000000 --- a/keyboards/at101_blackheart/at101_blackheart.c +++ /dev/null @@ -1 +0,0 @@ -#include "at101_blackheart.h" diff --git a/keyboards/at101_blackheart/at101_blackheart.h b/keyboards/at101_blackheart/at101_blackheart.h deleted file mode 100644 index 24ac1b7c541..00000000000 --- a/keyboards/at101_blackheart/at101_blackheart.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef at101_blackheart_H -#define at101_blackheart_H - -#include "quantum.h" - -#define LAYOUT( \ - K0000, K0100, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, K0106, K0007, K0107, \ - K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, K0207, K0307, K0208, K0308, K0209, K0309, K0009, \ - K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, K0407, K0507, K0408, K0508, K0409, K0509, K0109, \ - K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606, K0608, K0708, K0609, K0709, \ - K0800, K1101, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, K0807, K0808, K0908, K0809, K0909, \ - K1000, K1100, K1001, K1102, K1005, K1105, K1006, K1106, K1007, K1107, K1008, K1108, K1009 \ -) { \ - { K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, KC_NO, K0009 }, \ - { K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, KC_NO, K0109 }, \ - { K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208, K0209 }, \ - { K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308, K0309 }, \ - { K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408, K0409 }, \ - { K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508, K0509 }, \ - { K0600, K0601, K0602, K0603, K0604, K0605, K0606, KC_NO, K0608, K0609 }, \ - { K0700, K0701, K0702, K0703, K0704, K0705, KC_NO, KC_NO, K0708, K0709 }, \ - { K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808, K0809 }, \ - { K0900, K0901, K0902, K0903, K0904, K0905, KC_NO, KC_NO, K0908, K0909 }, \ - { K1000, K1001, KC_NO, KC_NO, KC_NO, K1005, K1006, K1007, K1008, K1009 }, \ - { K1100, K1101, K1102, KC_NO, KC_NO, K1105, K1106, K1107, K1108, KC_NO } \ -} - -#endif diff --git a/keyboards/at101_blackheart/config.h b/keyboards/at101_blackheart/config.h deleted file mode 100644 index 83814c6486c..00000000000 --- a/keyboards/at101_blackheart/config.h +++ /dev/null @@ -1,35 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER blindassassin111 -#define PRODUCT AT101_Blackheart PCB -#define DESCRIPTION Replacement AT101 PCB - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 10 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F0, F1, F4, D4, F6, F5, F7, B6, B5, D5, C7, C6 } -#define MATRIX_COL_PINS { D1, D0, B7, B3, B2, B1, B0, E6, D2, D3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* force n-key rollover*/ -#define FORCE_NKRO diff --git a/keyboards/at101_blackheart/info.json b/keyboards/at101_blackheart/info.json deleted file mode 100644 index 4bef46712d1..00000000000 --- a/keyboards/at101_blackheart/info.json +++ /dev/null @@ -1,121 +0,0 @@ -{ - "keyboard_name": "AT101 Blackheart PCB", - "keyboard_folder": "at101_blackheart", - "url": "https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html", - "maintainer": "qmk, blindassassin111", - "width": 22.5, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"Grave", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Num Lock", "x":18.5, "y":1.5}, - {"label":"Keypad /", "x":19.5, "y":1.5}, - {"label":"Keypad *", "x":20.5, "y":1.5}, - {"label":"Keypad -", "x":21.5, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"LBracket", "x":11.5, "y":2.5}, - {"label":"RBracket]", "x":12.5, "y":2.5}, - {"label":"Backslash", "x":13.5, "y":2.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Keypad 7", "x":18.5, "y":2.5}, - {"label":"Keypad 8", "x":19.5, "y":2.5}, - {"label":"Keypad 9", "x":20.5, "y":2.5}, - {"label":"Keypad +", "x":21.5, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":"Semicolon", "x":10.75, "y":3.5}, - {"label":"Quote", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"Keypad 4", "x":18.5, "y":3.5}, - {"label":"Keypad 5", "x":19.5, "y":3.5}, - {"label":"Keypad 6", "x":20.5, "y":3.5}, - {"label":"Keypad =", "x":21.5, "y":3.5}, - {"label":"LShift", "x":0, "y":4.5, "w":1.25}, - {"label":"ISO Backslash", "x":1.25, "y":4.5}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":"Comma", "x":9.25, "y":4.5}, - {"label":"Period", "x":10.25, "y":4.5}, - {"label":"Slash", "x":11.25, "y":4.5}, - {"label":"RShift", "x":12.25, "y":4.5, "w":1.75}, - {"label":"Fn", "x":14, "y":4.5}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Keypad 1", "x":18.5, "y":4.5}, - {"label":"Keypad 2", "x":19.5, "y":4.5}, - {"label":"Keypad 3", "x":20.5, "y":4.5}, - {"label":"Keypad Enter", "x":21.5, "y":4.5, "h":2}, - {"label":"LCtrl", "x":0, "y":5.5, "w":1.25}, - {"label":"LGUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"LAlt", "x":2.5, "y":5.5, "w":1.25}, - {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, - {"label":"RAlt", "x":10, "y":5.5, "w":1.25}, - {"label":"RGUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"RCtrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5}, - {"label":"Keypad 0", "x":18.5, "y":5.5, "w":2}, - {"label":"Keypad .", "x":20.5, "y":5.5} - ] - } - } -} diff --git a/keyboards/at101_blackheart/keymaps/default/keymap.c b/keyboards/at101_blackheart/keymaps/default/keymap.c deleted file mode 100644 index 086c25e1c77..00000000000 --- a/keyboards/at101_blackheart/keymaps/default/keymap.c +++ /dev/null @@ -1,53 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, KC_P4, KC_P5, KC_P6, KC_PEQL, - KC_LSFT,KC_BSLS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_LSFT,MO(1), KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI,KC_MENU, KC_RCTL, KC_LEFT,KC_DOWN, KC_RGHT, KC_P0, KC_PDOT), - - LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - DDRB |= (1 << 4); - DDRD |= (1 << 6) | (1 << 7); - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - PORTD |= (1 << 7); - } else { - PORTD &= ~(1 << 7); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - PORTB |= (1 << 4); - } else { - PORTB &= ~(1 << 4); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - PORTD |= (1 << 6); - } else { - PORTD &= ~(1 << 6); - } -} \ No newline at end of file diff --git a/keyboards/at101_blackheart/readme.md b/keyboards/at101_blackheart/readme.md deleted file mode 100644 index d435d6955aa..00000000000 --- a/keyboards/at101_blackheart/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# AT101 Blackheart PCB - -![AT101 Blackheart PCB](https://deskthority.net/resources/image/48571) - -A replacement PCB for AT101 keyboards. - -Keyboard Maintainer: QMK Community and blindassassin111 -Hardware Supported: AT101 blackheart PCB -Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html - -Make example for this keyboard (after setting up your build environment): - - make at101_blackheart:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/at101_blackheart/rules.mk b/keyboards/at101_blackheart/rules.mk deleted file mode 100644 index fadff6f23be..00000000000 --- a/keyboards/at101_blackheart/rules.mk +++ /dev/null @@ -1,59 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -BOOTLOADER = halfkay - -# Boot Section Size in *bytes* -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no \ No newline at end of file diff --git a/keyboards/atom47/keymaps/LEdiodes/keymap.c b/keyboards/atom47/keymaps/LEdiodes/keymap.c deleted file mode 100644 index 87e1244214a..00000000000 --- a/keyboards/atom47/keymaps/LEdiodes/keymap.c +++ /dev/null @@ -1,33 +0,0 @@ -#include QMK_KEYBOARD_H - -// These are all aliases for the function layers. -#define _L0 0 -#define _L1 1 -#define _L2 2 -#define _L3 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_L0] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \ - KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \ - -[_L2] = LAYOUT( - _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ - _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_L1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_L3] = LAYOUT( - _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \ -}; diff --git a/keyboards/atom47/keymaps/LEdiodes/rules.mk b/keyboards/atom47/keymaps/LEdiodes/rules.mk deleted file mode 100644 index d446d3a6995..00000000000 --- a/keyboards/atom47/keymaps/LEdiodes/rules.mk +++ /dev/null @@ -1,65 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/atom47/keymaps/default/keymap.c b/keyboards/atom47/keymaps/default/keymap.c deleted file mode 100644 index dc87b5a52be..00000000000 --- a/keyboards/atom47/keymaps/default/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _MA 0 //Main layer -#define _FN 1 //Fn -#define _FN1 2 //Fn1 -#define _PN 3 //Pn - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \ - KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \ - -[_FN] = LAYOUT( - _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ - _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_FN1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_PN] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \ - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<event.pressed) { - switch(keycode) { - case CTRLZ: - SEND_STRING(SS_LCTRL("z")); - return false; - case CTRLX: - SEND_STRING(SS_LCTRL("x")); - return false; - case CTRLC: - SEND_STRING(SS_LCTRL("c")); - return false; - case CTRLV: - SEND_STRING(SS_LCTRL("v")); - return false; - } - } - return true; -}; diff --git a/keyboards/atom47/keymaps/maartenwut/readme.md b/keyboards/atom47/keymaps/maartenwut/readme.md deleted file mode 100644 index 67959538571..00000000000 --- a/keyboards/atom47/keymaps/maartenwut/readme.md +++ /dev/null @@ -1 +0,0 @@ -This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control. diff --git a/keyboards/atom47/readme.md b/keyboards/atom47/readme.md deleted file mode 100644 index c3cffcea747..00000000000 --- a/keyboards/atom47/readme.md +++ /dev/null @@ -1,26 +0,0 @@ -# Atom47 - -![Atom47](https://i.imgur.com/Wwflqvt.png) - -## Support -Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) -Hardware Supported: Atom47 rev2/rev3 -Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221) - - -## Features (rev3 and up) -- QMK Firmware -- 6 Underglow RGB leds -- In-switch leds -- Through-hole micro usb connector (less likely to break off!) -- South facing leds for the QMX/Zealencio users -- Multiple layouts -- Easily reachable reset button under the spacebar -- CapsLock indicator - -## Build -To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -![Atom47](https://i.imgur.com/JfYnOba.jpg) diff --git a/keyboards/atom47/rev2/config.h b/keyboards/atom47/rev2/config.h deleted file mode 100644 index c38cd450ed6..00000000000 --- a/keyboards/atom47/rev2/config.h +++ /dev/null @@ -1,68 +0,0 @@ -/* -Copyright 2012 Maarten Dekkers . -*/ - -#ifndef REV2_CONFIG_H -#define REV2_CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Vortex -#define PRODUCT Core -#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS {B1,B2,B3,B7} -#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -#define RGB_DI_PIN D0 // The pin the LED strip is connected to -#define RGBLED_NUM 1 // Number of LEDs in your strip - -#define QMK_ESC_OUTPUT D7 // usually COL -#define QMK_ESC_INPUT B1 // usually ROW -#define QMK_LED B6 - -#endif diff --git a/keyboards/atom47/rev2/info.json b/keyboards/atom47/rev2/info.json deleted file mode 100644 index 3c45ca8d452..00000000000 --- a/keyboards/atom47/rev2/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atom47", - "url": "https://atomkb.eu/atom47", - "maintainer": "Maarten Dekkers", - "width": 13, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] - } - } -} diff --git a/keyboards/atom47/rev2/readme.md b/keyboards/atom47/rev2/readme.md deleted file mode 100644 index b63e1bb44ce..00000000000 --- a/keyboards/atom47/rev2/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# Atom47 rev2 - -This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it. - -## Support -Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot) -Hardware Supported: Atom47 rev2 -Hardware Availability: None - - -## Features -- QMK Firmware -- In-switch leds -- Through-hole micro usb connector (less likely to break off!) -- Easily reachable reset button under the spacebar -- In-switch CapsLock indicator - -## Build -To build the default keymap, simply run `make atom47/rev2:default`. - -For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atom47/rev2/rev2.c b/keyboards/atom47/rev2/rev2.c deleted file mode 100644 index 06fce06dad4..00000000000 --- a/keyboards/atom47/rev2/rev2.c +++ /dev/null @@ -1,34 +0,0 @@ -#include "rev2.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB &= ~(1<<5); - - //Set output high, so the capslock led is off - PORTB |= (1 << 5); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1<. -*/ - -#ifndef REV3_CONFIG_H -#define REV3_CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Vortex -#define PRODUCT Core -#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS {B3,B2,B1,B0} -#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -#define RGB_DI_PIN F5 // The pin the LED strip is connected to -#define RGBLED_NUM 6 // Number of LEDs in your strip -#define RGBLIGHT_ANIMATIONS -#define QMK_ESC_OUTPUT B7 // usually COL -#define QMK_ESC_INPUT B3 // usually ROW -#define QMK_LED E6 - -#endif diff --git a/keyboards/atom47/rev3/info.json b/keyboards/atom47/rev3/info.json deleted file mode 100644 index 3c45ca8d452..00000000000 --- a/keyboards/atom47/rev3/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atom47", - "url": "https://atomkb.eu/atom47", - "maintainer": "Maarten Dekkers", - "width": 13, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] - } - } -} diff --git a/keyboards/atom47/rev3/rev3.c b/keyboards/atom47/rev3/rev3.c deleted file mode 100644 index c541ed559c6..00000000000 --- a/keyboards/atom47/rev3/rev3.c +++ /dev/null @@ -1,27 +0,0 @@ -#include "rev3.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRE |= (1 << 6); - - //Set output high, so the capslock led is off - PORTE |= (1 << 6); -} - -void led_set_kb(uint8_t usb_led) { - led_set_user(usb_led); -} diff --git a/keyboards/atom47/rev3/rev3.h b/keyboards/atom47/rev3/rev3.h deleted file mode 100644 index ad875bb404f..00000000000 --- a/keyboards/atom47/rev3/rev3.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ATOM47_REV3_H -#define ATOM47_REV3_H - -#include "quantum.h" - -// readability -#define XXX KC_NO - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ - k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \ - {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \ - {k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \ -} - - -#endif diff --git a/keyboards/atom47/rev3/rules.mk b/keyboards/atom47/rev3/rules.mk deleted file mode 100644 index 13e553b5628..00000000000 --- a/keyboards/atom47/rev3/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) diff --git a/keyboards/atom47/rules.mk b/keyboards/atom47/rules.mk deleted file mode 100644 index 5f3dbb6686c..00000000000 --- a/keyboards/atom47/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 -BOOTLOADER= qmk-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -DEFAULT_FOLDER = atom47/rev3 - diff --git a/keyboards/atomic/atomic.c b/keyboards/atomic/atomic.c deleted file mode 100644 index 6f393315eeb..00000000000 --- a/keyboards/atomic/atomic.c +++ /dev/null @@ -1,15 +0,0 @@ -#include "atomic.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - MCUCR |= (1< -#include -#include - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT_semi_standard( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ - K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D, K3E }, \ - { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \ -} - -#define LAYOUT_grid( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,\ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,\ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,\ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E } \ -} - -#define LAYOUT_ortho_5x15 LAYOUT_grid - -#endif \ No newline at end of file diff --git a/keyboards/atomic/config.h b/keyboards/atomic/config.h deleted file mode 100644 index 045f8672772..00000000000 --- a/keyboards/atomic/config.h +++ /dev/null @@ -1,155 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Ortholinear Keyboards -#define PRODUCT The Atomic Keyboard -#define DESCRIPTION A compact ortholinear keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D5, B5, B6, C6 } -#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atomic/info.json b/keyboards/atomic/info.json deleted file mode 100644 index b07a070253a..00000000000 --- a/keyboards/atomic/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Atomic", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_semi_standard": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2, "w":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3, "w":2}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}] - } - } -} diff --git a/keyboards/atomic/keymaps/abienz.c b/keyboards/atomic/keymaps/abienz.c deleted file mode 100644 index 2e69165f24a..00000000000 --- a/keyboards/atomic/keymaps/abienz.c +++ /dev/null @@ -1,33 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_grid( /* Colemak */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO , - KC_TAB, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, CM_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , - KC_BSPC, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, KC_QUOT, KC_ENT, KC_NO, KC_PGUP, - KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, KC_RSFT, KC_NO, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_NO, KC_LALT, FUNC(1), KC_SPC, KC_NO, KC_RALT, FUNC(2), KC_RGUI, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, - ), - [1] = LAYOUT_grid( /* function */ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_NO , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SLEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MPLY, - KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, FUNC(1), KC_TRNS, KC_NO, KC_TRNS, FUNC(2), KC_TRNS, KC_NO, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), - [2] = ACTION_LAYER_MOMENTARY(1), -}; - -const macro_t * action_get_macro(keyrecord_t * record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - return MACRODOWN(TYPE(KC_T), END); - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atomic/keymaps/default/keymap.c b/keyboards/atomic/keymaps/default/keymap.c deleted file mode 100644 index 55de476d1a8..00000000000 --- a/keyboards/atomic/keymaps/default/keymap.c +++ /dev/null @@ -1,227 +0,0 @@ -#include QMK_KEYBOARD_H - -// Fillers to make layering more clear -#define ___T___ KC_TRNS - -// Layer shorthand -#define _QW 0 -#define _CM 1 -#define _DV 2 -#define _LW 3 -#define _RS 4 -#define _FN 5 - -/* ROW 1 OPTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - * .- 2u ------------. - * | KEY . XXXXXX | - * '-----------------' - */ - -/* ROW 2 OPTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - * .- 2u ------------. .- 2u ------------. - * | KEY . XXXXXX | | KEY . XXXXXX | - * '-----------------' '-----------------' - */ - -/* ROW 3 OPTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - * .- 2u ------------. .- 2u ------------. - * | KEY . XXXXXX | | X | - * '-----------------' '-----------------' - * .- 2u ------------. - * | X | - * '-----------------' - */ - -/* ROW 4 OPTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - * .- 2u ------------. - * | KEY . XXXXXX | - * '-----------------' - * .- 2u ------------. .- 2u ------------. - * | KEY . XXXXXX | | KEY . XXXXXX | - * '-----------------' '-----------------' - * .- 2u ------------. - * | KEY . XXXXXX | - * '-----------------' - */ - -/* ROW 5 OPTIONS - * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - * .- 1.25u --+ 1.25u ------- 1.25u +--- 1.25u --- 2u -------------- 1.25u ---- 1.25u ------ 1.25u +---- 1.25u . - * | X | X | X | X | X | X | X | X | X | - * '-----------------------------------------------------------------------------------------------------------' - * .- 2u ------------. - * | X | - * '-----------------' - * .--------------------- 6.25u ----------------------------. - * | X | - * '--------------------------------------------------------' - * .----------------------- 6.25u ---------------------------- 1.25u ---- 1.25u ---- 1.25u ------ 1.25u +-- 1.25u --. - * | X | X | X | X | X | X | - * '----------------------------------------------------------------------------------------------------------------' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* QWERTY - MIT ENHANCED / GRID COMPATIBLE - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_QW] = LAYOUT_grid( /* QWERTY */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN, - M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT - ), - - /* COLEMAK - MIT ENHANCED / GRID COMPATIBLE - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | ESC | A | R | S | T | D | H | N | E | I | O | ' | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | Z | X | C | V | B | K | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_CM] = LAYOUT_grid( /* COLEMAK */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN, - M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT - ), - - /* DVORAK - MIT ENHANCED / GRID COMPATIBLE - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | ' | , | . | P | Y | F | G | C | R | L | [ | ] | \ | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | ESC | A | O | E | U | I | D | H | T | N | S | / | XXXXXX . ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | LSHIFT | ; | Q | J | K | X | B | M | W | V | Z | XXXXXX . RSHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | BRITE | LCTRL | LALT | LGUI | RAISE | XXXXXX . SPACE | LOWER | RGUI | RALT | RCTRL | FN | LEFT | DOWN | RIGHT | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_DV] = LAYOUT_grid( /* DVORAK */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, KC_ENT, KC_ENT, KC_PGUP, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN, - M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC, KC_SPC, MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT - ), - - /* LOWERED - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | | INS | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | XXXXXX . | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | XXXXXX . | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_LW] = LAYOUT_grid( /* LOWERED */ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___, - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, _______, KC_INS , - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, ___T___, ___T___, _______, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* RAISED - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | | INS | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | XXXXXX . | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | XXXXXX . | | | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | XXXXXX . | | | | | | | | | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_RS] = LAYOUT_grid( /* RAISED */ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___, - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, KC_INS , - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, ___T___, ___T___, _______, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, ___T___, ___T___, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* FUNCTION - * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. - * | NUM LK | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| - * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| - * | | | QWERTY | COLEMK | DVORAK | | | | | | | XXXXXX . | MOUS U | WHEEL- | - * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | XXXXXX . MS BT1 | | | | | | MOUS L | MOUS D | MOUS R | - * '--------------------------------------------------------------------------------------------------------------------------------------' - */ - - [_FN] = LAYOUT_grid( /* FUNCTION */ - KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___, - KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR, - KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U, - _______, _______, DF(_QW), DF(_CM), DF(_DV), _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D, - _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atomic/keymaps/michelle.c b/keyboards/atomic/keymaps/michelle.c deleted file mode 100644 index 61953bf6606..00000000000 --- a/keyboards/atomic/keymaps/michelle.c +++ /dev/null @@ -1,179 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_grid( /* Dvorak */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_NO , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_INS, KC_DEL , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_NO, KC_PGUP , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_NO, KC_UP, KC_PGDN , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LCTL, MO(1), KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, MO(2), KC_LEFT, KC_DOWN, KC_RGHT , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ - // │ X │ X │ X │ X │ X │ X │ X │ X │ X │ - // └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌───────────────────── 6.25u ────────────────────────────┐ - // │ X │ - // └────────────────────────────────────────────────────────┘ - // ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ - // │ X │ X │ X │ X │ X │ X │ - // └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ - ), - [1] = LAYOUT_grid( /* Qwerty + F keys */ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_NO , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_INS, KC_DEL , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_NO, KC_PGUP , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP, KC_PGDN , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LCTL, KC_TRNS, KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ - // │ X │ X │ X │ X │ X │ X │ X │ X │ X │ - // └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌───────────────────── 6.25u ────────────────────────────┐ - // │ X │ - // └────────────────────────────────────────────────────────┘ - // ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ - // │ X │ X │ X │ X │ X │ X │ - // └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ - ), - [2] = LAYOUT_grid( /* Numpad + qwerty shortcut keys */ - { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_NO , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_P4, KC_P5, KC_P6, KC_L, KC_SLSH, KC_EQL, KC_INS, KC_DEL , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_P1, KC_P2, KC_P3, KC_S, KC_MINS, KC_ENT, KC_NO, KC_PGUP , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_X, KC_B, KC_P0, KC_P0, KC_PENT, KC_Z, KC_RSFT, KC_NO, KC_UP, KC_PGDN , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌─ 2u ────────────┐ ┌─ 2u ────────────┐ - // │ X │ │ X │ - // └─────────────────┘ └─────────────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - KC_LCTL, KC_TRNS, KC_NO, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_NO, KC_LGUI, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT , - // ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ - // │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ - // └────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┴────────┘ - // ┌─ 1.25u ──┬ 1.25u ───┬─── 1.25u ┬─── 1.25u ─┬─ 2u ────────────┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬──── 1.25u ┐ - // │ X │ X │ X │ X │ X │ X │ X │ X │ X │ - // └──────────┴──────────┴──────────┴───────────┴─────────────────┴──────────┴──────────┴──────────┴───────────┘ - // ┌─ 2u ────────────┐ - // │ X │ - // └─────────────────┘ - // ┌───────────────────── 6.25u ────────────────────────────┐ - // │ X │ - // └────────────────────────────────────────────────────────┘ - // ┌─────────────────────── 6.25u ──────────────────────────┬─ 1.25u ──┬─ 1.25u ──┬─ 1.25u ──┬─── 1.25u ┬── 1.25u ──┐ - // │ X │ X │ X │ X │ X │ X │ - // └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - return MACRODOWN(TYPE(KC_T), END); - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h deleted file mode 100644 index 3803a2ccd01..00000000000 --- a/keyboards/atomic/keymaps/pvc/config.h +++ /dev/null @@ -1,153 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#undef PRODUCT_ID -#define PRODUCT_ID 0x0419 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_BREATHING - -#define C6_AUDIO - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -// Enable Keyboard Locking via magic key -#define KEYBOARD_LOCK_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -#ifndef NO_DEBUG -# define NO_DEBUG -#endif - -/* disable print */ -// #ifndef NO_PRINT -// # define NO_PRINT -// #endif - -/* Only print user print statements */ -#define USER_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -//#define VIBRATO_ENABLE -//#define VIBRATO_STRENGTH_ENABLE - -#endif diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c deleted file mode 100644 index 33b3a9d824b..00000000000 --- a/keyboards/atomic/keymaps/pvc/keymap.c +++ /dev/null @@ -1,609 +0,0 @@ -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" -#include "led.h" -#include "mousekey.h" - -#ifdef AUDIO_ENABLE - #include "audio.h" - #include "song_list.h" -#endif - -enum keyboard_layers { - LAYER_QWERTY = 0, - LAYER_UPPER, - LAYER_LOWER, - LAYER_FUNCTION, - LAYER_MOUSE, - LAYER_ADJUST, -}; -enum keyboard_macros { - MACRO_QWERTY = 0, - MACRO_UPPER, - MACRO_LOWER, - MACRO_FUNCTION, - MACRO_MOUSE, - MACRO_TIMBRE_1, - MACRO_TIMBRE_2, - MACRO_TIMBRE_3, - MACRO_TIMBRE_4, - MACRO_TEMPO_U, - MACRO_TEMPO_D, - MACRO_TONE_DEFAULT, - MACRO_MUSIC_TOGGLE, - MACRO_AUDIO_TOGGLE, - MACRO_INC_VOICE, - MACRO_DEC_VOICE, - MACRO_BACKLIGHT, - MACRO_BREATH_TOGGLE, - MACRO_BREATH_SPEED_INC, - MACRO_BREATH_SPEED_DEC, - MACRO_BREATH_DEFAULT, - MACRO_MOUSE_MOVE_UL, - MACRO_MOUSE_MOVE_UR, - MACRO_MOUSE_MOVE_DL, - MACRO_MOUSE_MOVE_DR, - MACRO_HELP_1, - MACRO_HELP_2, - MACRO_HELP_3, - MACRO_HELP_4, - MACRO_HELP_5, - MACRO_HELP_6, - MACRO_HELP_7, - MACRO_HELP_8, - MACRO_HELP_9, -}; - -#define M_QWRTY M(MACRO_QWERTY) -#define M_UPPER M(MACRO_UPPER) -#define M_LOWER M(MACRO_LOWER) -#define M_FUNCT M(MACRO_FUNCTION) -#define M_MOUSE M(MACRO_MOUSE) -#define TIMBR_1 M(MACRO_TIMBRE_1) -#define TIMBR_2 M(MACRO_TIMBRE_2) -#define TIMBR_3 M(MACRO_TIMBRE_3) -#define TIMBR_4 M(MACRO_TIMBRE_4) -#define TMPO_UP M(MACRO_TEMPO_U) -#define TMPO_DN M(MACRO_TEMPO_D) -#define TMPO_DF M(MACRO_TONE_DEFAULT) -#define M_BACKL M(MACRO_BACKLIGHT) -#define M_BRTOG M(MACRO_BREATH_TOGGLE) -#define M_BSPDU M(MACRO_BREATH_SPEED_INC) -#define M_BSPDD M(MACRO_BREATH_SPEED_DEC) -#define M_BDFLT M(MACRO_BREATH_DEFAULT) -#define M_MS_UL M(MACRO_MOUSE_MOVE_UL) -#define M_MS_UR M(MACRO_MOUSE_MOVE_UR) -#define M_MS_DL M(MACRO_MOUSE_MOVE_DL) -#define M_MS_DR M(MACRO_MOUSE_MOVE_DR) -#define M_HELP1 M(MACRO_HELP_1) -#define M_HELP2 M(MACRO_HELP_2) -#define M_HELP3 M(MACRO_HELP_3) -#define M_HELP4 M(MACRO_HELP_4) -#define M_HELP5 M(MACRO_HELP_5) -#define M_HELP6 M(MACRO_HELP_6) -#define M_HELP7 M(MACRO_HELP_7) -#define M_HELP8 M(MACRO_HELP_8) -#define M_HELP9 M(MACRO_HELP_9) - - -#define VC_UP M(MACRO_INC_VOICE) -#define VC_DOWN M(MACRO_DEC_VOICE) - - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -#define TG_NKRO MAGIC_TOGGLE_NKRO -#define OS_SHFT KC_FN0 - -#define ________________ _______, _______ -#define XXXXXXXXXXXXXXXX XXXXXXX, XXXXXXX - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* LAYER = LAYER_QWERTY - .--------------------------------------------------------------------------------------------------------------------------------------. - | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP . BACKSP | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | CAP LK | A | S | D | F | G | H | J | K | L | ; | ' | ENTER . ENTER | PG UP | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT . RSHIFT | UP | PG DN | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | LCTRL | LWIN | FN | LALT | UPPER | SPACE . SPACE | LOWER | OSHIFT | RALT | APP | RCTRL | LEFT | DOWN | RIGHT | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_QWERTY] = LAYOUT_grid( - KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, - KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , - KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_ENT , KC_PGUP, - KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_RSFT, KC_UP , KC_PGDN, - KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC , KC_SPC , M_LOWER, OS_SHFT, KC_RALT, KC_APP , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - /* LAYER = LAYER_UPPER - .--------------------------------------------------------------------------------------------------------------------------------------. - | PRINT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | KP / | KP * | KP - | XXXXXX | XXXXXX | ______ . ______ | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | PAUSE | F1 | F2 | F3 | F4 | NUM LK | KP / | KP 7 | KP 8 | KP 9 | KP - | ______ | ______ | ______ | INS | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | F5 | F6 | F7 | F8 | CAP LK | KP * | KP 4 | KP 5 | KP 6 | KP + | ______ | ______ . ______ | HOME | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | F9 | F10 | F11 | F12 | SCR LK | KP 0 | KP 1 | KP 2 | KP 3 | KP ENT | ______ . ______ | ______ | END | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | ______ | ______ | ______ | UPPER | KP 0 . KP 0 | ______ | RALT | KP . | KP ENT | ______ | ______ | ______ | ______ | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_UPPER] = LAYOUT_grid( - KC_PSCR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, XXXXXXX, XXXXXXX, _______, _______, - KC_PAUS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_NLCK, KC_PSLS, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS , - _______, KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_CAPS, KC_PAST, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, _______, _______, KC_HOME, - _______, KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_SLCK, KC_KP_0, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______, _______, KC_END , - _______, _______, _______, _______, M_UPPER, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______ - ), - /* LAYER = LAYER_LOWER - .--------------------------------------------------------------------------------------------------------------------------------------. - | PRINT | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | ______ . ______ | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | $ | { | [ | ( | % | # | ) | ] | } | @ | ______ | ______ | ______ | INS | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | ^ | * | + | - | / | \ | _ | ' | " | ` | ______ | ______ . ______ | HOME | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | | | & | ! | ~ | ; | : | = | < | > | ? | ______ . ______ | ______ | END | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | ______ | ______ | ______ | ______ | ______ . ______ | LOWER | ______ | ______ | ______ | ______ | ______ | ______ | ______ | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_LOWER] = LAYOUT_grid( - KC_PSCR, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, - _______, KC_DLR , KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT , _______, _______, _______, KC_INS , - _______, KC_CIRC, KC_ASTR, KC_PLUS, KC_MINS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT , KC_GRV , _______, _______, _______, KC_HOME, - _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL , KC_LT , KC_GT , KC_QUES, _______, _______, _______, KC_END , - _______, _______, _______, _______, _______, _______, _______, M_LOWER, _______, _______, _______, _______, _______, _______, _______ - ), - /* LAYER = LAYER_FUNCTION - .--------------------------------------------------------------------------------------------------------------------------------------. - | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | F13 | F14 | F15 | F16 | NUM LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | F17 | F18 | F19 | F20 | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | F21 | F22 | F23 | F24 | CAP LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | ______ . ______ | VOL UP | MUTE | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | ______ | FN | ______ | ______ | PLAY . PLAY | ______ | ______ | ______ | ______ | ______ | PREV | VOL DN | NEXT | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_FUNCTION] = LAYOUT_grid( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - _______, KC_F21 , KC_F22 , KC_F23 , KC_F24 , KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_VOLU, KC_MUTE, - _______, _______, M_FUNCT, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT - ), - /* LAYER = LAYER_MOUSE - .--------------------------------------------------------------------------------------------------------------------------------------. - | ESC | MS AC0 | MS AC1 | MS AC2 | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS UL | MS U | MS UR | XXXXXX | XXXXXX | XXXXXX | MS WHL | MS WHR | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | MS BT5 | MS BT4 | MS BT3 | MS BT2 | XXXXXX | XXXXXX | MS L | XXXXXX | MS R | XXXXXX | XXXXXX | XXXXXX . XXXXXX | MS WHU | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MS DL | MS D | MS DR | XXXXXX | ______ . ______ | MS U | MS WHD | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | ______ | ______ | ______ | ______ | ______ | MS BT1 . MS BT1 | ______ | ______ | ______ | ______ | ______ | MS L | MS D | MS R | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_MOUSE] = LAYOUT_grid( - KC_ESC , KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_UL, KC_MS_U, M_MS_UR, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_L, KC_WH_R, - XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, KC_MS_L, XXXXXXX, KC_MS_R, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_MS_DL, KC_MS_D, M_MS_DR, XXXXXXX, _______, _______, KC_MS_U, KC_WH_D, - _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R - ), - /* LAYER = LAYER_ADJUST - .--------------------------------------------------------------------------------------------------------------------------------------. - | XXXXXX | HELP 1 | HELP 2 | HELP 3 | HELP 4 | HELP 5 | HELP 6 | HELP 7 | HELP 8 | HELP 9 | XXXXXX | MUSIC | AUDIO | XXXXXX . XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | BRTOG | BRSPD+ | BRSPD- | BRDFLT | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | QWERTY | XXXXXX | XXXXXX | BACKLT | RESET | XXXXXX | MOUSE | XXXXXX | XXXXXX | XXXXXX | XXXXXX . XXXXXX | VOICE+ | XXXXXX | - |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - | XXXXXX | XXXXXX | XXXXXX | XXXXXX | UPPER | XXXXXX . XXXXXX | LOWER | XXXXXX | XXXXXX | XXXXXX | XXXXXX | TEMPO- | VOICE- | TEMPO+ | - '--------------------------------------------------------------------------------------------------------------------------------------' - */ - [LAYER_ADJUST] = LAYOUT_grid( - XXXXXXX, M_HELP1, M_HELP2, M_HELP3, M_HELP4, M_HELP5, M_HELP6, M_HELP7, M_HELP8, M_HELP9, XXXXXXX, MU_TOG , AU_TOG , XXXXXXX, XXXXXXX, - XXXXXXX, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , XXXXXXX, M_MOUSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_UPPER, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TMPO_DN, MUV_DE , TMPO_UP - ), -}; - -#ifdef AUDIO_ENABLE - -float tone_my_startup[][2] = SONG(ODE_TO_JOY); -float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); - -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); - -float tone_audio_on[][2] = SONG(CLOSE_ENCOUNTERS_5_NOTE); -float tone_music_on[][2] = SONG(DOE_A_DEER); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND); -float tone_caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); -float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND); -float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND); -float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND); -float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND); - -#endif /* AUDIO_ENABLE */ - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_ONESHOT(MOD_LSFT), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - - case MACRO_HELP_1: - if (record->event.pressed) - { - uprintf("1"); - } - break; - - case MACRO_HELP_2: - if (record->event.pressed) - { - uprintf("2"); - } - break; - - case MACRO_HELP_3: - if (record->event.pressed) - { - uprintf("3"); - } - break; - - case MACRO_HELP_4: - if (record->event.pressed) - { - uprintf("4"); - } - break; - - case MACRO_HELP_5: - if (record->event.pressed) - { - uprintf("5"); - } - break; - - case MACRO_HELP_6: - if (record->event.pressed) - { - uprintf("6"); - } - break; - - case MACRO_HELP_7: - if (record->event.pressed) - { - uprintf("7"); - } - break; - - case MACRO_HELP_8: - if (record->event.pressed) - { - uprintf("8"); - } - break; - - case MACRO_HELP_9: - if (record->event.pressed) - { - uprintf("9"); - } - break; - - case MACRO_BREATH_TOGGLE: - if (record->event.pressed) - { - breathing_toggle(); - } - break; - - case MACRO_BREATH_SPEED_INC: - if (record->event.pressed) - { - breathing_period_inc(); - } - break; - - case MACRO_BREATH_SPEED_DEC: - if (record->event.pressed) - { - breathing_period_dec(); - } - break; - - case MACRO_BREATH_DEFAULT: - if (record->event.pressed) - { - breathing_period_default(); - } - break; - - case MACRO_QWERTY: - if (record->event.pressed) - { - persistent_default_layer_set(1UL<event.pressed) - { - layer_on(LAYER_UPPER); - breathing_period_set(2); - breathing_pulse(); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); - } - else - { - layer_off(LAYER_UPPER); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); - } - break; - - case MACRO_LOWER: - if (record->event.pressed) - { - layer_on(LAYER_LOWER); - breathing_period_set(2); - breathing_pulse(); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); - } - else - { - layer_off(LAYER_LOWER); - update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST); - } - break; - - case MACRO_FUNCTION: - if (record->event.pressed) - { - breathing_period_set(3); - breathing_enable(); - layer_on(LAYER_FUNCTION); - } - else - { - breathing_period_set(1); - breathing_self_disable(); - layer_off(LAYER_FUNCTION); - } - break; - -#ifdef MOUSEKEY_ENABLE - - case MACRO_MOUSE: - if (record->event.pressed) - { - layer_invert(LAYER_MOUSE); - } - break; - -#endif /* MOUSEKEY_ENABLE */ - -#ifdef AUDIO_ENABLE - - case MACRO_TIMBRE_1: - if (record->event.pressed) set_timbre(TIMBRE_12); - break; - - case MACRO_TIMBRE_2: - if (record->event.pressed) set_timbre(TIMBRE_25); - break; - - case MACRO_TIMBRE_3: - if (record->event.pressed) set_timbre(TIMBRE_50); - break; - - case MACRO_TIMBRE_4: - if (record->event.pressed) set_timbre(TIMBRE_75); - break; - - case MACRO_TEMPO_U: - if (record->event.pressed) increase_tempo(10); - break; - - case MACRO_TEMPO_D: - if (record->event.pressed) decrease_tempo(10); - break; - - case MACRO_TONE_DEFAULT: - if (record->event.pressed) - { - set_timbre(TIMBRE_DEFAULT); - set_tempo(TEMPO_DEFAULT); - } - break; - -/* - case MACRO_AUDIO_TOGGLE: - if (record->event.pressed) - { - if (is_audio_on()) - { - audio_off(); - } - else - { - audio_on(); - PLAY_SONG(tone_audio_on); - } - } - break; - - case MACRO_MUSIC_TOGGLE: - if (record->event.pressed) - { - if (IS_LAYER_ON(LAYER_MUSIC)) - { - layer_off(LAYER_MUSIC); - stop_all_notes(); - } - else - { - PLAY_SONG(tone_music_on); - layer_on(LAYER_MUSIC); - } - } - break; - case MACRO_INC_VOICE: - if (record->event.pressed) - { - #ifdef AUDIO_ENABLE - voice_iterate(); - PLAY_SONG(music_scale); - #endif - } - break; - - case MACRO_DEC_VOICE: - if (record->event.pressed) - { - #ifdef AUDIO_ENABLE - voice_deiterate(); - PLAY_SONG(music_scale); - #endif - } - break; -*/ - -#endif /* AUDIO_ENABLE */ - -#ifdef BACKLIGHT_ENABLE - case MACRO_BACKLIGHT: - if (record->event.pressed) - { - backlight_step(); - } -#endif - - default: - break; - - } - return MACRO_NONE; -}; - - -#ifdef AUDIO_ENABLE - -void matrix_init_user(void) -{ - set_voice(default_voice); - startup_user(); - println("Matrix Init"); -} - -void led_set_user(uint8_t usb_led) -{ - static uint8_t old_usb_led = 0; - - _delay_ms(10); // gets rid of tick - - if (!is_playing_notes()) - { - if ((usb_led & (1<event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md deleted file mode 100644 index 0561c4fea5e..00000000000 --- a/keyboards/atomic/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -Atomic -=== - -![Atomic](http://i.imgur.com/3gNDJAh.jpg) - -A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB. - -Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert) -Hardware Supported: Atomic PCB rev1, Teensy 2.0 -Hardware Availability: no longer available - -Make example for this keyboard (after setting up your build environment): - - make atomic:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk deleted file mode 100644 index eee6c2530a2..00000000000 --- a/keyboards/atomic/rules.mk +++ /dev/null @@ -1,71 +0,0 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -LAYOUTS = ortho_5x15 \ No newline at end of file diff --git a/keyboards/atreus/atreus.c b/keyboards/atreus/atreus.c deleted file mode 100644 index 263ec873238..00000000000 --- a/keyboards/atreus/atreus.c +++ /dev/null @@ -1 +0,0 @@ -#include "atreus.h" \ No newline at end of file diff --git a/keyboards/atreus/atreus.h b/keyboards/atreus/atreus.h deleted file mode 100644 index 8e868ecc0e6..00000000000 --- a/keyboards/atreus/atreus.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef ATREUS_H -#define ATREUS_H - -#include "quantum.h" -#include "matrix.h" -#include "backlight.h" -#include - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \ - { k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \ - { k20, k21, k22, k23, k24, k35, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b } \ -} - -#endif diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h deleted file mode 100644 index b1559a29d8e..00000000000 --- a/keyboards/atreus/config.h +++ /dev/null @@ -1,87 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0x1209 -#define PRODUCT_ID 0xA1E5 -#define DEVICE_VER 0x0008 -#define MANUFACTURER Technomancy -#define PRODUCT Atreus -#define DESCRIPTION q.m.k. keyboard firmware for Atreus - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 - -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#if defined(ATREUS_ASTAR) -# define MATRIX_ROW_PINS { D0, D1, D3, D2 } -#if defined(PCBDOWN) -# define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } -#else -# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } -#endif -# define UNUSED_PINS -#elif defined(ATREUS_TEENSY2) -# define MATRIX_ROW_PINS { D0, D1, D2, D3 } -# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } -# define UNUSED_PINS -#endif - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atreus/info.json b/keyboards/atreus/info.json deleted file mode 100644 index 73cff2509a4..00000000000 --- a/keyboards/atreus/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atreus", - "url": "", - "maintainer": "qmk", - "width": 13, - "height": 4.7, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.35}, {"x":2, "y":0}, {"x":3, "y":0.35}, {"x":4, "y":0.7}, {"x":8, "y":0.7}, {"x":9, "y":0.35}, {"x":10, "y":0}, {"x":11, "y":0.35}, {"x":12, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.35}, {"x":2, "y":1}, {"x":3, "y":1.35}, {"x":4, "y":1.7}, {"x":8, "y":1.7}, {"x":9, "y":1.35}, {"x":10, "y":1}, {"x":11, "y":1.35}, {"x":12, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.35}, {"x":2, "y":2}, {"x":3, "y":2.35}, {"x":4, "y":2.7}, {"x":8, "y":2.7}, {"x":9, "y":2.35}, {"x":10, "y":2}, {"x":11, "y":2.35}, {"x":12, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.35}, {"x":2, "y":3}, {"x":3, "y":3.35}, {"x":4, "y":3.7}, {"x":5, "y":2.95, "h":1.5}, {"x":7, "y":2.95, "h":1.5}, {"x":8, "y":3.7}, {"x":9, "y":3.35}, {"x":10, "y":3}, {"x":11, "y":3.35}, {"x":12, "y":3.6}] - } - } -} diff --git a/keyboards/atreus/keymaps/alphadox/config.h b/keyboards/atreus/keymaps/alphadox/config.h deleted file mode 100644 index e998e5edc3d..00000000000 --- a/keyboards/atreus/keymaps/alphadox/config.h +++ /dev/null @@ -1,75 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Arbitrary Definitions -#define PRODUCT Planckeus -#define DESCRIPTION q.m.k. keyboard firmware for Planckeus - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 - -#define MATRIX_ROW_PINS { D0, D1, D2, D3 } -#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, F7, B0, B1, B2, B3, B7 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atreus/keymaps/alphadox/keymap.c b/keyboards/atreus/keymaps/alphadox/keymap.c deleted file mode 100644 index 15485f287d8..00000000000 --- a/keyboards/atreus/keymaps/alphadox/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -#include QMK_KEYBOARD_H - -#define BASE 0 -#define SYMB 1 -#define ETC 2 - -enum macro_id { - TEENSY, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( - KC_Q, KC_W, KC_D, KC_F, KC_K, KC_J, KC_U, KC_R, KC_L, KC_SCLN, - LT(ETC,KC_A), KC_S, KC_E, KC_T, KC_G, KC_Y, KC_N, KC_I, KC_O, KC_H, - SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_P, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH), - KC_GRV, KC_DEL, KC_LALT, GUI_T(KC_TAB), LT(SYMB,KC_BSPC), CTL_T(KC_ESC), SFT_T(KC_ENT), LT(SYMB,KC_SPC), GUI_T(KC_LEFT), KC_DOWN, KC_UP, LCAG_T(KC_RGHT) - ), - - [SYMB] = LAYOUT( - KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_EQL, KC_7, KC_8, KC_9, KC_PLUS, - KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_BSLS, KC_MINS, KC_4, KC_5, KC_6, KC_QUOT, - KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_ASTR, KC_UNDS, KC_1, KC_2, KC_3, KC_DQUO, - KC_TILD, KC_AMPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_NO, KC_DOT, KC_TRNS - ), - - [ETC] = LAYOUT( - RESET, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_VOLU, KC_F7, KC_F8, KC_F9, KC_HOME, - LT(ETC,KC_A), KC_NO, KC_NO, KC_NO, KC_PGDN, KC_VOLD, KC_F4, KC_F5, KC_F6, KC_END, - KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, KC_MUTE, KC_F1, KC_F2, KC_F3, KC_INS, - KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case TEENSY: - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/classic/keymap.c b/keyboards/atreus/keymaps/classic/keymap.c deleted file mode 100644 index dce9dd96dee..00000000000 --- a/keyboards/atreus/keymaps/classic/keymap.c +++ /dev/null @@ -1,47 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _RS 1 -#define _LW 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = LAYOUT( /* Qwerty */ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT - ), - - [_RS] = LAYOUT( /* [> RAISE <] */ - KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , - KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , - KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS , - TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL - ), - - [_LW] = LAYOUT( /* [> LOWER <] */ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12 , - KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c deleted file mode 100644 index 631697384b8..00000000000 --- a/keyboards/atreus/keymaps/default/keymap.c +++ /dev/null @@ -1,58 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _RS 1 -#define _LW 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = LAYOUT( /* Qwerty */ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT - ), - - /* - * ! @ up { } || pgup 7 8 9 * - * # left down right $ || pgdn 4 5 6 + - * [ ] ( ) & || ` 1 2 3 \ - * lower insert super shift bksp ctrl || alt space fn . 0 = - */ - [_RS] = LAYOUT( /* [> RAISE <] */ - KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , - KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , - KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS , - TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ), - /* - * insert home up end pgup || up F7 F8 F9 F10 - * del left down right pgdn || down F4 F5 F6 F11 - * volup reset || F1 F2 F3 F12 - * voldn super shift bksp ctrl || alt space L0 prtsc scroll pause - */ - [_LW] = LAYOUT( /* [> LOWER <] */ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , - KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , - KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/dvorak_42_key/README.md b/keyboards/atreus/keymaps/dvorak_42_key/README.md deleted file mode 100644 index 86ce7380238..00000000000 --- a/keyboards/atreus/keymaps/dvorak_42_key/README.md +++ /dev/null @@ -1,21 +0,0 @@ -Overview -======== - -This is a dvorak based layout for the Atreus. Its basic key layout is similar to the ergodox_ez "dvorak_42_key" layout. In fact this layout was created for seamless switching between the Ergodox EZ and Atreus. - -How to build and flash ----------------------- - -to build; -make atreus:dvorak_42_key - -to flash: -avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_dvorak_42_key.hex -P COM7 - -Layers ------- -* BASE: basic dvorak layout -* KEYNAV: arrow-key navigation. Momentary toggle held by thumb allows the right hand to navigate through text as well as copy/paste/cut, page up/page down -* KEYSEL: similar to KEYNAV, except for shift-selection -* COMBINED: this is a layer that combines numbers, brackets and special characters. !@#$%^&*( can be type by shift+COMBINED+1/2/3/etc.. -* MOUSE: mouse navigation, as well as browser tab-left/tab-right shortcuts \ No newline at end of file diff --git a/keyboards/atreus/keymaps/dvorak_42_key/config.h b/keyboards/atreus/keymaps/dvorak_42_key/config.h deleted file mode 100644 index 12a221d7f56..00000000000 --- a/keyboards/atreus/keymaps/dvorak_42_key/config.h +++ /dev/null @@ -1,99 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -// mouse speed - -#define MOUSEKEY_INTERVAL 15 -#define MOUSEKEY_DELAY 100 -#define MOUSEKEY_TIME_TO_MAX 100 -#define MOUSEKEY_MAX_SPEED 3 - -#define MOUSEKEY_WHEEL_DELAY 500 -#define MOUSEKEY_WHEEL_DELTA 1 -#define MOUSEKEY_WHEEL_MAX_SPEED 1 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 100 - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Technomancy -#define PRODUCT Atreus -#define DESCRIPTION q.m.k. keyboard firmware for Atreus - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 - -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#if defined(ATREUS_ASTAR) -# define MATRIX_ROW_PINS { D0, D1, D3, D2 } -#if defined(PCBDOWN) -# define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } -#else -# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } -#endif -# define UNUSED_PINS -#elif defined(ATREUS_TEENSY2) -# define MATRIX_ROW_PINS { D0, D1, D2, D3 } -# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } -# define UNUSED_PINS -#endif - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atreus/keymaps/dvorak_42_key/keymap.c b/keyboards/atreus/keymaps/dvorak_42_key/keymap.c deleted file mode 100644 index 0fda245e2ee..00000000000 --- a/keyboards/atreus/keymaps/dvorak_42_key/keymap.c +++ /dev/null @@ -1,116 +0,0 @@ - -#include QMK_KEYBOARD_H - -// layers -#define BASE 0 -#define KEYNAV 1 -#define KEYSEL 2 -#define COMBINED 3 -#define BROWSER_CONTROL 4 - -// aliases -// shell -#define SHELL_DEL_WORD RCTL(KC_W) -// android studio - -#define AS_TABLEFT LALT(KC_LEFT) -#define AS_TABRIGHT LALT(KC_RIGHT) -#define AS_SYMBOL LCTL(LALT(KC_N)) -#define AS_CLASS LCTL(KC_N) -#define AS_FINDUSAGE LALT(KC_F7) -#define AS_BACK LCTL(LALT(KC_LEFT)) -#define AS_GO_DECLARATION LCTL(KC_B) -#define AS_GO_IMPLEMENTATION LCTL(LALT(KC_B)) -#define AS_CLOSETAB LCTL(KC_F4) -#define AS_CLOSETOOLWINDOW LCTL(LSFT(KC_F4)) - -enum custom_keycodes { - PLACEHOLDER = SAFE_RANGE, // can always be here - - // Cloud9 macros - CLOUD9_TAB_LEFT, - CLOUD9_TAB_RIGHT, - CLOUD9_TAB_CLOSE, - CLOUD9_GOTO_SYMBOL, - CLOUD9_GOTO_LINE, - CLOUD9_NAVIGATE, - -}; - -// building instructions: -// make atreus:dvorak_42_key - -// flashing instructions: -// avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_dvorak_42_key.hex -P COM7 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( - KC_QUOTE, KC_COMMA, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, - KC_SCOLON, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, - OSM(MOD_LSFT), OSM(MOD_LCTL), MO(KEYSEL), MO(BROWSER_CONTROL), MO(COMBINED), MO(KEYNAV), KC_ENTER, KC_SPACE, KC_BSPC, RCTL(KC_BSPC), KC_CAPSLOCK, OSM(MOD_LSFT) - ), - - [KEYNAV] = LAYOUT( - KC_ESC, AS_GO_IMPLEMENTATION, RCTL(KC_Z), RCTL(KC_S), MEH(KC_A), MEH(KC_B), KC_HOME, KC_UP, KC_END, KC_PGUP, - AS_BACK, AS_SYMBOL, RSFT(KC_TAB), KC_TAB, SHELL_DEL_WORD, LCTL(KC_LEFT), KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_RIGHT), - AS_FINDUSAGE, AS_CLASS, AS_TABLEFT, AS_TABRIGHT, AS_CLOSETAB, KC_TRNS, RCTL(KC_C), RCTL(KC_X), RCTL(KC_V), KC_PGDOWN, - AS_CLOSETOOLWINDOW, AS_GO_DECLARATION, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENTER, KC_SPACE, KC_BSPC, RCTL(KC_BSPC), KC_DELETE, LCTL(KC_DELETE) - ), - - [KEYSEL] = LAYOUT( - MEH(KC_G), MEH(KC_H),MEH(KC_I), MEH(KC_J), MEH(KC_K), KC_TRNS, RSFT(KC_HOME), RSFT(KC_UP), RSFT(KC_END), RSFT(KC_PGUP), - MEH(KC_L), MEH(KC_M),MEH(KC_N), MEH(KC_O), MEH(KC_P), RSFT(RCTL(KC_LEFT)), RSFT(KC_LEFT), RSFT(KC_DOWN), RSFT(KC_RIGHT), RSFT(RCTL(KC_RIGHT)), - MEH(KC_Q), MEH(KC_R),MEH(KC_S), MEH(KC_T), MEH(KC_U), KC_TRNS, RCTL(KC_C), RCTL(KC_X), RCTL(KC_V), RSFT(KC_PGDN), - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENTER, KC_SPACE, KC_BSPC, RCTL(KC_BSPC), KC_DELETE, LCTL(KC_DELETE) - ), - - [COMBINED] = LAYOUT( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_PLUS, KC_7, KC_8, KC_9, KC_ASTR, - KC_LPRN, KC_RPRN, KC_LBRACKET, KC_RBRACKET, KC_UNDS, KC_MINS, KC_4, KC_5, KC_6, KC_SLSH, - KC_COLN, KC_DQUO, KC_LCBR, KC_RCBR, KC_AMPR, KC_EQUAL, KC_1, KC_2, KC_3, KC_QUES, - KC_TRNS, KC_TILD, KC_GRAVE, KC_CIRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_PIPE, KC_BSLS - ), - - [BROWSER_CONTROL] = LAYOUT( - MEH(KC_0), KC_BTN3, KC_MS_U, KC_BTN1, KC_BTN2, KC_UP, KC_PGUP, KC_PGDN, KC_MS_WH_UP, MEH(KC_9), - MEH(KC_1), KC_MS_L, KC_MS_D, KC_MS_R, MEH(KC_6), KC_DOWN, RSFT(RCTL(KC_TAB)), RCTL(KC_TAB), KC_MS_WH_DOWN, LALT(KC_LEFT), - MEH(KC_2), MEH(KC_3), MEH(KC_4), MEH(KC_5), MEH(KC_7), MEH(KC_8), RCTL(KC_1), RCTL(KC_9), KC_F6, KC_F5, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RCTL(KC_W), RCTL(KC_T), RSFT(RCTL(KC_TAB)), KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if(record->event.pressed) { - switch (keycode) { - // Cloud9 macros - case CLOUD9_TAB_LEFT: - SEND_STRING(SS_LCTRL("[")); - return true; - break; - case CLOUD9_TAB_RIGHT: - SEND_STRING(SS_LCTRL("]")); - return true; - break; - case CLOUD9_TAB_CLOSE: - SEND_STRING(SS_LALT("w")); - return true; - break; - case CLOUD9_GOTO_SYMBOL: - SEND_STRING(SS_LSFT(SS_LCTRL("e"))); - return true; - break; - case CLOUD9_GOTO_LINE: - SEND_STRING(SS_LCTRL("g")); - return true; - break; - case CLOUD9_NAVIGATE: - SEND_STRING(SS_LCTRL("e")); - return true; - break; - } - } - - return true; -} - diff --git a/keyboards/atreus/keymaps/erlandsona/config.h b/keyboards/atreus/keymaps/erlandsona/config.h deleted file mode 100644 index 4a7ade96ad8..00000000000 --- a/keyboards/atreus/keymaps/erlandsona/config.h +++ /dev/null @@ -1,90 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* Make Overloaded Keys switch faster */ -#define TAPPING_TERM 150 - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Technomancy -#define PRODUCT Atreus -#define DESCRIPTION q.m.k. keyboard firmware for Atreus - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 - -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#if defined(ATREUS_ASTAR) -# define MATRIX_ROW_PINS { D0, D1, D3, D2 } -#if defined(PCBDOWN) -# define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } -#else -# define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } -#endif -# define UNUSED_PINS -#elif defined(ATREUS_TEENSY2) -# define MATRIX_ROW_PINS { D0, D1, D2, D3 } -# define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 } -# define UNUSED_PINS -#endif - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atreus/keymaps/erlandsona/keymap.c b/keyboards/atreus/keymaps/erlandsona/keymap.c deleted file mode 100644 index e890e7f5281..00000000000 --- a/keyboards/atreus/keymaps/erlandsona/keymap.c +++ /dev/null @@ -1,58 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define BASE 0 -#define NUMS 1 -#define MOUS 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( /* Qwerty */ - KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , - KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , - SFT_T(KC_Z), KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , SFT_T(KC_QUOT), - KC_LCTL , KC_LALT, KC_LALT, KC_LGUI, KC_BSPC, KC_ESC, KC_ENT, KC_SPC, F(NUMS), KC_RALT, KC_SLSH, KC_BSLS - ), - - [NUMS] = LAYOUT( /* Numbers / Arrows / Symbols */ - KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_LPRN, KC_RPRN, KC_MINS, KC_EQL , KC_LBRC, - KC_TAB , KC_5 , KC_6 , KC_7 , KC_8 , KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_RBRC, - _______, KC_9 , KC_0 , KC_DOT , KC_COMM, KC_HOME, KC_PGDN, KC_PGUP, KC_END , _______, - _______, _______, _______, _______, KC_DEL , F(MOUS), _______, _______, _______, _______, _______, _______ - ), - - [MOUS] = LAYOUT( /* Mouse and Media Keys */ - KC_SLCK, KC_PAUSE, KC_F11 , KC_F10 , KC_F9 , KC_F8 , KC_F7 , KC_F6 , KC_F5 , KC_F4, - KC_VOLD, KC_ACL0 , KC_ACL1, KC_ACL2, KC_VOLU, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_F3, - KC_MUTE, KC_MPRV , KC_MPLY, KC_MNXT, KC_MUTE, KC_WH_R, KC_WH_U, KC_WH_D, KC_WH_L, KC_F2, - _______, _______ , _______, _______, _______, _______, _______, KC_BTN1, F(BASE), RESET , KC_F12 , KC_F1 - ), -}; - - -// I prefer this layer switching strategy to the TG and MO functions. -// so that I can get out of mouse mode just by tapping/holding my base layer FN key. -const uint16_t PROGMEM fn_actions[] = { - [BASE] = ACTION_LAYER_OFF(2, 1), // switch back to layer 0 - [NUMS] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [MOUS] = ACTION_LAYER_ON(2, 1) // switch to layer 2 -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/gerb/keymap.c b/keyboards/atreus/keymaps/gerb/keymap.c deleted file mode 100644 index f858aa49c45..00000000000 --- a/keyboards/atreus/keymaps/gerb/keymap.c +++ /dev/null @@ -1,61 +0,0 @@ -// This is the personal keymap of Chris Gerber (@gerbercj). I haven't worked out the kinks -// with the Colemak and Dvorak support yet, but everything else works nicely. - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _CM 1 -#define _DV 2 -#define _L1 3 -#define _L2 4 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = LAYOUT( /* Qwerty */ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT - ), - [_CM] = LAYOUT( /* Colemak */ - KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, - KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT - ), - [_DV] = LAYOUT( /* Dvorak */ - KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, - KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_ENT - ), - [_L1] = LAYOUT( /* LAYER 1 */ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_VOLU, KC_7, KC_8, KC_9, KC_LBRC, - KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_VOLD, KC_4, KC_5, KC_6, KC_RBRC, - KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, KC_MINS, KC_MUTE, KC_1, KC_2, KC_3, KC_BSLS, - TG(_L2), KC_APP, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL - ), - [_L2] = LAYOUT( /* LAYER 2 */ - KC_TRNS, KC_WH_L, KC_MS_U, KC_WH_R, KC_WH_U, DF(_QW), KC_F7, KC_F8, KC_F9, KC_F10, - KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, DF(_CM), KC_F6, KC_F5, KC_F6, KC_F11, - KC_BTN4, KC_BTN1, KC_BTN2, KC_BTN3, KC_BTN4, DF(_DV), KC_F1, KC_F2, KC_F3, KC_F12, - KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/henxing/Readme.md b/keyboards/atreus/keymaps/henxing/Readme.md deleted file mode 100644 index a615adf9665..00000000000 --- a/keyboards/atreus/keymaps/henxing/Readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Hugh's Atreus Keymap - -This keymap is the same as the [default](../default) layout for the Atreus, but -uses the programming style found in the Let's -Split [default](../../../lets_split/keymaps/default) keymap. See -[`keymap.c`](keymap.c) for the layout. diff --git a/keyboards/atreus/keymaps/henxing/keymap.c b/keyboards/atreus/keymaps/henxing/keymap.c deleted file mode 100644 index 51a46fa3737..00000000000 --- a/keyboards/atreus/keymaps/henxing/keymap.c +++ /dev/null @@ -1,103 +0,0 @@ -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - * q w e r t || y u i o p - * a s d f g || h j k l ; - * z x c v b || n m , . / - * esc tab gui shift bksp ctrl || alt space lower - ' enter - */ - [_QWERTY] = LAYOUT( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, LOWER, KC_MINS, KC_QUOT, KC_ENT \ - ), - - /* - * ! @ up { } || pgup 7 8 9 * - * # left down right $ || pgdn 4 5 6 + - * [ ] ( ) & || ` 1 2 3 \ - * raise insert gui shift bksp ctrl || alt space ____ . 0 = - */ - [_LOWER] = LAYOUT( \ - KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR, \ - KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS, \ - KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, \ - RAISE, KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL \ - ), - - /* - * insert home up end pgup || up F7 F8 F9 F10 - * del left down right pgdn || down F4 F5 F6 F11 - * volup reset || F1 F2 F3 F12 - * voldn super shift bksp ctrl || alt space QWERTY prtsc scroll pause - */ - [_RAISE] = LAYOUT( \ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10, \ - KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11, \ - KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12, \ - KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, QWERTY, KC_PSCR, KC_SLCK, KC_PAUS \ - ), -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - - // The value to return - bool return_value = false; - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - break; - - case LOWER: - // Toggle LOWER layer on when key pressed and off when released - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - break; - - case RAISE: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_RAISE); - } - break; - - default: - - // If the keycode is not handled by any of the other cases, the - // function should return true - return_value = true; - break; - } - - return return_value; -} diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c deleted file mode 100644 index baf506b9744..00000000000 --- a/keyboards/atreus/keymaps/jeremy/keymap.c +++ /dev/null @@ -1,62 +0,0 @@ -// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer. - -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "keymap_colemak.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -#define ALPH 0 -#define NUMS 1 -#define CURS 2 -#define SYMB 3 -#define FKEY 4 - -// Some handy macros to keep the keymaps clean and easier to maintain -#define KM_SAVE LGUI(CM_S) -#define KM_CLSE LGUI(CM_W) -#define KM_OPEN LGUI(CM_O) - -#define KM_COPY LGUI(KC_C) -#define KM_CUT LGUI(KC_X) -#define KM_PAST LGUI(KC_V) -#define KM_UNDO LGUI(KC_Z) -#define KM_REDO LGUI(LSFT(KC_Z)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [ALPH] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F, KC_G, KC_H, KC_J, LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN, - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_LCTL, KC_ESC, KC_NO, KC_LSFT, KC_SPC, KC_LALT, KC_LGUI, KC_ENT, KC_RSFT, KC_NO, KC_ESC, KC_RCTL - ), - [NUMS] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_ASTR, KC_SLSH, KC_TRNS, KC_7, KC_8, KC_9, KC_SLSH, - KC_TRNS, KC_TRNS, KC_EQL, KC_PLUS, KC_MINS, KC_LPRN, KC_4, KC_5, KC_6, KC_ASTR, - KC_TRNS, KC_TRNS, KC_DOT, KC_COMM, CM_SCLN, KC_RPRN, KC_1, KC_2, KC_3, KC_MINS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS - ), - [CURS] = LAYOUT( - KC_TRNS, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KM_SAVE, KC_TRNS, KM_OPEN, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KM_UNDO, KC_LALT, KC_TRNS, KC_LGUI, KC_TRNS, - KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_MPLY, KM_REDO, KM_CLSE, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TAB, KM_COPY, KM_CUT, KM_PAST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [SYMB] = LAYOUT( - KC_BSLS, KC_EXLM, KC_LABK, KC_RABK, CM_COLN, KC_UNDS, KC_DLR, KC_QUES, KC_TRNS, KC_PERC, - KC_AT, KC_AMPR, KC_LPRN, KC_RPRN, CM_SCLN, KC_COMM, KC_DOT, KC_QUOT, KC_TRNS, KC_TILD, - KC_HASH, KC_PIPE, KC_LCBR, KC_RCBR, KC_SLSH, KC_TRNS, KC_GRV, KC_DQT, KC_TRNS, KC_CIRC, - KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [FKEY] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) {} - - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/jeremy/readme.md b/keyboards/atreus/keymaps/jeremy/readme.md deleted file mode 100644 index df0179a8e00..00000000000 --- a/keyboards/atreus/keymaps/jeremy/readme.md +++ /dev/null @@ -1,45 +0,0 @@ -Jeremy's Atreus Key Mapping -=========================== - -I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling. - -My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015). - -## Main Layers - -1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac) -2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5) -3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4) -4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973) -5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89) - -## Notes - -### General - -Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching. - -I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory. - -### Symbol Layer - -1. I placed characters that deal with an if statement close together, such as !, & and |. -2. All matching brace/bracket characters are together as well. - -### Number Layer - -1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could. -2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key. -3. Parentheses were added for typing on the calculator. - -### Cursor Layer - -1. It includes basic audio controls because they didn't really fit anywhere else -2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard. -3. It contains the backspace and delete keys right on top of the left and right arrows. -4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word. - -### Function Layer - -1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row. -2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved. diff --git a/keyboards/atreus/keymaps/khitsule/config.h b/keyboards/atreus/keymaps/khitsule/config.h deleted file mode 100644 index c74909a9ff2..00000000000 --- a/keyboards/atreus/keymaps/khitsule/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define IGNORE_MOD_TAP_INTERRUPT - -#endif diff --git a/keyboards/atreus/keymaps/khitsule/keymap.c b/keyboards/atreus/keymaps/khitsule/keymap.c deleted file mode 100644 index 04cd4d59168..00000000000 --- a/keyboards/atreus/keymaps/khitsule/keymap.c +++ /dev/null @@ -1,63 +0,0 @@ -// Personal keymap of khitsule - -#include QMK_KEYBOARD_H - -#define ALPH 0 -#define LOWR 1 -#define RAIS 2 - -// enum layers { -// ALPH, //alpha qwerty -// LOWR, //layer 1: nav and functions -// RAIS //layer 2: numpad and symbols -// }; - -// define any macros here to keep keymap clean and readable - -#define KM_DLEFT LGUI(LCTL(KC_LEFT)) -#define KM_DRIGHT LGUI(LCTL(KC_RIGHT)) - -#define tap_mod_macro(record, mod, macro) ( ((record)->event.pressed) ? \ - ( ((record)->tap.count <= 0 || (record)->tap.interrupted) ? MACRO(D(mod), END) : MACRO_NONE ) : \ - ( ((record)->tap.count > 0 && !((record)->tap.interrupted)) ? (macro) : MACRO(U(mod), END) ) ) - - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [ALPH] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_ESC, KC_TRNS, KC_TRNS, ALT_T(KC_ENT), LT(LOWR, KC_TAB), CTL_T(KC_SPC), SFT_T(KC_BSPC), LT(RAIS, KC_DEL), KC_LGUI, KC_TRNS, KC_QUOT, KC_MINUS - ), - [LOWR] = LAYOUT( - KC_PSCR, KC_HOME, KC_UP, KC_END, KC_TRNS, KC_LPRN, KC_F7, KC_F8, KC_F9, KC_RPRN, - KC_VOLU, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGUP, KC_LBRC, KC_F4, KC_F5, KC_F6, KC_RBRC, - KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_PGDN, LSFT(KC_LBRC), KC_F1, KC_F2, KC_F3, LSFT(KC_RBRC), - KM_DLEFT, KM_DRIGHT, LALT(KC_TAB), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [RAIS] = LAYOUT( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, - KC_CIRC, KC_AMPR, KC_GRV, KC_TILD, KC_PIPE, KC_PLUS, KC_4, KC_5, KC_6, KC_ASTR, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_MINUS, KC_1, KC_2, KC_3, KC_SLASH, - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_MACRO_TAP(1), - [2] = ACTION_MACRO_TAP(2) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case 1: - return tap_mod_macro(record, LGUI, MACRO( D(LSFT), T(9), U(LSFT), END)); - break; - case 2: - return tap_mod_macro(record, LALT, MACRO( D(LSFT), T(0), U(LSFT), END)); - break; - - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/khitsule/readme.md b/keyboards/atreus/keymaps/khitsule/readme.md deleted file mode 100644 index bf984b52b3b..00000000000 --- a/keyboards/atreus/keymaps/khitsule/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# Atreus Layout by Khitsule -![Khitsule](https://i.imgur.com/wuki3aM.png) - -[KLE link](http://www.keyboard-layout-editor.com/#/gists/35ed66c55456699fd8f5d06750984a07) - -## Layers -| Layer | Legend | -| ----- | ------ | -| Base | Top left (black) | -| Lower | Top right (purple) | -| Raise | Bottom right (pink) | - -## Features -* Raise/lower layers focus first on one-handed use -* Numpad on right hand with raise layer -* Navigation on left hand with lower layer (ESDF) - * D refers to desktop left/right on Win 10 (win+ctrl+left/right) -* Heavy use of hold/tap dual function keys - * Ctrl/Space - * Shift/Backspace - * Alt/Enter - * Lower/Tab - * Raise/Delete \ No newline at end of file diff --git a/keyboards/atreus/keymaps/nojjan/config.h b/keyboards/atreus/keymaps/nojjan/config.h deleted file mode 100644 index 90b7c4a6c62..00000000000 --- a/keyboards/atreus/keymaps/nojjan/config.h +++ /dev/null @@ -1,10 +0,0 @@ -#pragma once - -#undef MATRIX_ROW_PINS -#undef MATRIX_COL_PINS -#undef UNUSED_PINS - -// Pin configuration for falbatech atreus -#define MATRIX_ROW_PINS { D0, D1, D3, D2 } -#define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } -#define UNUSED_PINS diff --git a/keyboards/atreus/keymaps/nojjan/keymap.c b/keyboards/atreus/keymaps/nojjan/keymap.c deleted file mode 100644 index d0aa3b279a3..00000000000 --- a/keyboards/atreus/keymaps/nojjan/keymap.c +++ /dev/null @@ -1,57 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _RS 1 -#define _LW 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_QW] = LAYOUT( /* Qwerty */ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , - KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT ), -/* - * ! @ up { } || pgup 7 8 9 * - * # left down right $ || pgdn 4 5 6 + - * [ ] ( ) & || ` 1 2 3 \ - * lower insert super shift bksp ctrl || alt space fn . 0 = - */ -[_RS] = LAYOUT( /* [> RAISE <] */ - KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , - KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , - KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS , - TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ), -/* - * insert home up end pgup || up F7 F8 F9 F10 - * del left down right pgdn || down F4 F5 F6 F11 - * volup reset || F1 F2 F3 F12 - * voldn super shift bksp ctrl || alt space L0 prtsc scroll pause - */ -[_LW] = LAYOUT( /* [> LOWER <] */ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , - KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , - KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/ptillemans/keymap.c b/keyboards/atreus/keymaps/ptillemans/keymap.c deleted file mode 100644 index 9019e9a8c04..00000000000 --- a/keyboards/atreus/keymaps/ptillemans/keymap.c +++ /dev/null @@ -1,49 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _RS 1 -#define _LW 2 - -#define MY_SHEN MT(MOD_LSFT, KC_ENT) -#define MY_CTES MT(MOD_LCTL, KC_ESC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = LAYOUT( /* Qwerty */ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , - TT(_LW), KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, MY_CTES, KC_LALT, KC_SPC, TT(_RS), KC_MINS, KC_QUOT, MY_SHEN - ), - - /* - * ! @ up { } || pgup 7 8 9 * - * # left down right $ || pgdn 4 5 6 + - * [ ] ( ) & || ` 1 2 3 \ - * lower insert super shift bksp ctrl || alt space fn . 0 = - */ - [_RS] = LAYOUT( /* [> RAISE <] */ - KC_EXLM, KC_AT, KC_UP, KC_UNDS, KC_PLUS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , - KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , - KC_RBRC, KC_LBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS , - TT(_LW), _______, _______, _______, _______, _______, _______, _______, TO(_QW), KC_DOT, KC_0, KC_EQL - ), - /* - * insert home up end pgup || up F7 F8 F9 F10 - * del left down right pgdn || down F4 F5 F6 F11 - * volup reset || F1 F2 F3 F12 - * voldn super shift next ctrl || alt space L0 prtsc scroll pause - */ - [_LW] = LAYOUT( /* [> LOWER <] */ - KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , - KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_TILD, KC_F1, KC_F2, KC_F3, KC_F12 , - KC_NO, KC_VOLD, _______, _______, KC_MNXT, _______, _______, _______, TO(_QW), KC_PSCR, KC_SLCK, KC_MPLY - ) -}; diff --git a/keyboards/atreus/keymaps/replicaJunction/config.h b/keyboards/atreus/keymaps/replicaJunction/config.h deleted file mode 100644 index 8e786aa0da8..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/config.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -// Layer definitions - -#define L_COLEMAK 0 -#define L_NUM 1 -#define L_EXTEND 2 -#define L_FUNC 3 -#define L_LL_R 4 -#define L_LL_E 5 -#define L_LL_I 6 diff --git a/keyboards/atreus/keymaps/replicaJunction/keymap.c b/keyboards/atreus/keymaps/replicaJunction/keymap.c deleted file mode 100644 index c3cc371151f..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/keymap.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Keyboard: Atreus - * Keymap: replicaJunction - * Version: 2.1 - */ - -#include QMK_KEYBOARD_H -#include "replicaJunction.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[L_COLEMAK] = LAYOUT( - KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, - KC_A, KC_R_LT, KC_S_LT, KC_T, KC_G, KC_M, KC_N, KC_E_LT, KC_I_LT, KC_O, - KX_Z_MT, KX_X_MT, KX_C_MT, KX_D_MT, KC_V, KC_K, KX_H_MT, KX_COMT, KX_DOMT, KX_SLMT, - TD_LAYR, KC_LGUI, KC_TAB, KC_LSFT, KX_BKNM, KX_DCTL, KX_NALT, KX_SPAC, KC_RSFT, KC_MINS, KC_QUOT, KC_EQL -) -, - -[L_NUM] = LAYOUT( - KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_SLSH, KC_COLN, KC_7, KC_8, KC_9, KC_SLSH, - KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_PIPE, KC_HASH, KC_4, KC_5, KC_6, KC_ASTR, - KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BSLS, KC_BSPC, KC_1, KC_2, KC_3, KC_MINS, - _______, KC_AMPR, KC_TILD, KC_GRV, ooooooo, _______, KC_ENT, MO_FUNC, KC_0, KC_DOT, KC_EQL, KC_PLUS -) -, - -[L_EXTEND] = LAYOUT( - _______, _______, _______, KC_APP, KX_CGR, KC_PGUP, KC_HOME, KC_UP, KC_END, KC_DEL, - KC_LGUI, KC_LSFT, KC_LALT, KC_LCTL, _______, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC, - _______, _______, _______, KX_SRCH, KX_PAST, _______, KX_STAB, KC_TAB, _______, KC_INS, - _______, _______, _______, _______, MO_FUNC, KC_DEL, KC_ENT, _______, _______, _______, _______, KC_PSCR -) -, - -[L_FUNC] = LAYOUT( - _______, _______, M_LCLIK, M_RCLIK, M_MCLIK, KC_VOLU, KC_F9, KC_F10, KC_F11, KC_F12, - KC_LGUI, KC_LSFT, KC_LALT, KC_LCTL, M_WHLUP, KC_MUTE, KC_F5, KC_F6, KC_F7, KC_F8, - M_LEFT, M_DOWN, M_UP, M_RIGHT, M_WHLDN, KC_VOLD, KC_F1, KC_F2, KC_F3, KC_F4, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ -) -, - -[L_LL_R] = LAYOUT( - _______, _______, _______, _______, _______, KC_COLN, KC_P7, KC_P8, KC_P9, KC_PSLS, - _______, ooooooo, KC_AMPR, KC_PIPE, _______, KC_HASH, KC_P4, KC_P5, KC_P6, KC_PAST, - _______, _______, _______, _______, _______, KC_BSPC, KC_P1, KC_P2, KC_P3, KC_PMNS, - _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, KC_PLUS -) -, - -[L_LL_E] = LAYOUT( - RJ_MAKE, RJ_EQ, RJ_LEQ, RJ_GEQ, RJ_GEQR, _______, _______, _______, _______, _______, - _______, _______, RJ_SELS, RJ_DUND, _______, _______, _______, ooooooo, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ -) -, - -[L_LL_I] = LAYOUT( - KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_SLSH, _______, KC_UNDS, KC_GRV, _______, _______, - KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_PIPE, _______, KC_MINS, KC_QUOT, ooooooo, _______, - KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BSLS, _______, KC_TILD, KC_DQT, _______, _______, - _______, KC_AMPR, KC_LABK, KC_RABK, _______, _______, _______, _______, _______, _______, _______, _______ -) - -}; - -// Uncomment any of these to add keyboard-specific code. Otherwise, they -// will use user defaults defined in the replicaJunction.h header file. - -// bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { -// return true; -// } - -// void matrix_init_keymap(void) {}; - -// void matrix_scan_keymap(void) {}; diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/base-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/base-layer.txt deleted file mode 100644 index aec41316f23..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/base-layer.txt +++ /dev/null @@ -1,34 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2},"F"], -[{y:-0.65,x:1},"W",{x:1},"P"], -[{y:-0.75},"Q"], -[{y:-0.9,x:4},"B"], -[{y:-0.7,x:2},"S"], -[{y:-0.65,x:1,c:"#45b866"},"R",{x:1,c:"#cccccc"},"T"], -[{y:-0.75},"A"], -[{y:-0.9,x:4},"G"], -[{y:-0.7,x:2},"C\n\n\n"], -[{y:-0.65,x:1},"X\n\n\nCtrl",{x:1},"D\n\n\nCtrlAlt"], -[{y:-0.75},"Z"], -[{y:-0.9,x:4},"V\n\n\nAlt"], -[{y:-0.75,x:5,h:1.5},"Del\nCtrl"], -[{y:-0.95,x:2},"Tab"], -[{y:-0.65,x:1,a:7,fa:[7]},"",{x:1,a:4,f:3},"Shift"], -[{y:-0.75,f:3},"Layer tap"], -[{y:-0.9,x:4,f:3},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,f:3},"U"], -[{y:-0.65,x:1,f:3},"L",{x:1,f:3},"Y"], -[{y:-0.75,x:4,f:3},":\n;"], -[{y:-0.9,f:3},"J"], -[{y:-0.7,x:2,c:"#ffb07b",f:3},"E"], -[{y:-0.65,x:1,c:"#cccccc",f:3},"N",{x:1,c:"#5dcde3",f:3},"I"], -[{y:-0.75,x:4,c:"#cccccc",f:3},"O"], -[{y:-0.9,f:3},"M"], -[{y:-0.7,x:2,f:3},"<\n,\n\nCtrlAlt"], -[{y:-0.65,x:1,f:3},"H\n\n\nAlt",{x:1,f:3},">\n.\n\n"], -[{y:-0.75,x:4,f:3},"?\n/\n\nCtrl"], -[{y:-0.9,f:3},"K"], -[{y:-0.75,x:-1,f:3,h:1.5},"Enter\nAlt"], -[{y:-0.95,x:2,f:3},"_\n-"], -[{y:-0.65,x:1,f:3},"Shift",{x:1,f:3},"\"\n'"], -[{y:-0.75,x:4,f:3},"+\n="], -[{y:-0.9,c:"#ffe08d",f:3},"Space"] diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/e-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/e-layer.txt deleted file mode 100644 index 2b4105b2b42..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/e-layer.txt +++ /dev/null @@ -1,34 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2},"<="], -[{y:-0.65,x:1},"==",{x:1},">="], -[{y:-0.75},"make"], -[{y:-0.9,x:4},"=>"], -[{y:-0.7,x:2},"select *"], -[{y:-0.65,x:1,a:7},"",{x:1,a:4},"$_"], -[{y:-0.75,a:7},""], -[{y:-0.9,x:4},""], -[{y:-0.7,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{y:-0.75,x:5,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""], -[{y:-0.7,x:2,c:"#ffb07b"},""], -[{y:-0.65,x:1,c:"#cccccc"},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""], -[{y:-0.7,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""], -[{y:-0.75,x:-1,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""] diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/fn-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/fn-layer.txt deleted file mode 100644 index d45fb7e97dc..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/fn-layer.txt +++ /dev/null @@ -1,35 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2},"RClick"], -[{y:-0.65,x:1,a:7},"",{x:1,a:4},"LClick"], -[{y:-0.75,a:7},""], -[{y:-0.9,x:4,a:4},"MClick"], -[{y:-0.7,x:2},"Alt"], -[{y:-0.65,x:1},"Shift",{x:1},"Ctrl"], -[{y:-0.75,a:7,fa:[7]},""], -[{y:-0.9,x:4,a:4,fa:[5,0,0,0,0,0,0,0,0,0,7]},"\n\n\n\n\n\n\n\n\n\n"], -[{y:-0.7,x:2,fa:[0,0,0,0,0,0,0,0,0,0,7]},"\n\n\n\n\n\n\n\n\n\n"], -[{y:-0.65,x:1},"\n\n\n\n\n\n\n\n\n\n",{x:1},"\n\n\n\n\n\n\n\n\n\n"], -[{y:-0.75},"\n\n\n\n\n\n\n\n\n\n"], -[{y:-0.9,x:4,fa:[5,0,0,0,0,0,0,0,0,0,7]},"\n\n\n\n\n\n\n\n\n\n"], -[{y:-0.75,x:5,a:7,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4,c:"#ffe08d"},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,c:"#cccccc",a:4,f:3},"F10"], -[{y:-0.65,x:1,f:3},"F9",{x:1,f:3},"F11"], -[{y:-0.75,x:4,f:3},"F12"], -[{y:-0.9,a:7},""], -[{y:-0.7,x:2,a:4,f:3},"F6"], -[{y:-0.65,x:1,f:3},"F5",{x:1,f:3},"F7"], -[{y:-0.75,x:4,f:3},"F8"], -[{y:-0.9,a:7},""], -[{y:-0.7,x:2,a:4,f:3},"F2"], -[{y:-0.65,x:1,f:3},"F1",{x:1,f:3},"F3"], -[{y:-0.75,x:4,f:3},"F4"], -[{y:-0.9,a:7},""], -[{y:-0.75,x:-1,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9,c:"#ffe08d"},""] - diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/i-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/i-layer.txt deleted file mode 100644 index 45bef783a30..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/i-layer.txt +++ /dev/null @@ -1,34 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2},"{"], -[{y:-0.65,x:1},"@",{x:1},"}"], -[{y:-0.75},"!"], -[{y:-0.9,x:4},"/"], -[{y:-0.7,x:2},"("], -[{y:-0.65,x:1},"$",{x:1},")"], -[{y:-0.75},"#"], -[{y:-0.9,x:4},"|"], -[{y:-0.7,x:2},"["], -[{y:-0.65,x:1},"^",{x:1},"]"], -[{y:-0.75},"%"], -[{y:-0.9,x:4},"\\"], -[{y:-0.75,x:5,a:7,h:1.5},""], -[{y:-0.95,x:2,a:4},"<"], -[{y:-0.65,x:1},"&",{x:1},">"], -[{y:-0.75,a:7},""], -[{y:-0.9,x:4},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,a:4},"`"], -[{y:-0.65,x:1},"_",{x:1,a:7},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""], -[{y:-0.7,x:2,a:4},"'"], -[{y:-0.65,x:1},"-",{x:1,c:"#5dcde3",a:7},""], -[{y:-0.75,x:4,c:"#cccccc"},""], -[{y:-0.9},""], -[{y:-0.7,x:2,a:4},"\""], -[{y:-0.65,x:1},"~",{x:1,a:7},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""], -[{y:-0.75,x:-1,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4},""], -[{y:-0.9},""] diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/r-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/r-layer.txt deleted file mode 100644 index 3d44383863a..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/r-layer.txt +++ /dev/null @@ -1,34 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2,a:7},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{y:-0.7,x:2,a:4},"&"], -[{y:-0.65,x:1,c:"#45b866",a:7},"",{x:1,c:"#cccccc",a:4},"|"], -[{y:-0.75,a:7},""], -[{y:-0.9,x:4},""], -[{y:-0.7,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{y:-0.75,x:5,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2,a:4},"8"], -[{y:-0.65,x:1},"7",{x:1},"9"], -[{y:-0.75,x:4},"/"], -[{y:-0.9},":"], -[{y:-0.7,x:2},"5"], -[{y:-0.65,x:1},"4",{x:1},"6"], -[{y:-0.75,x:4},"*"], -[{y:-0.9},"#"], -[{y:-0.7,x:2},"2"], -[{y:-0.65,x:1},"1",{x:1},"3"], -[{y:-0.75,x:4},"-"], -[{y:-0.9},""], -[{y:-0.75,x:-1,a:7,h:1.5},""], -[{y:-0.95,x:2,a:4},"."], -[{y:-0.65,x:1},"0",{x:1},"="], -[{y:-0.75,x:4},"+"], -[{y:-0.9},"Space"] diff --git a/keyboards/atreus/keymaps/replicaJunction/kle/space-layer.txt b/keyboards/atreus/keymaps/replicaJunction/kle/space-layer.txt deleted file mode 100644 index d1ffa35f895..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/kle/space-layer.txt +++ /dev/null @@ -1,34 +0,0 @@ -[{r:10,rx:1,y:-0.1,x:2,a:7},""], -[{y:-0.65,x:1},"",{x:1,fa:[7]},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{y:-0.7,x:2,a:4,f:3},"Alt"], -[{y:-0.65,x:1,f:3},"Shift",{x:1,f:3},"Ctrl"], -[{y:-0.75,a:7},""], -[{y:-0.9,x:4},""], -[{y:-0.7,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{y:-0.75,x:5,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75},""], -[{y:-0.9,x:4},""], -[{r:-10,rx:7,ry:0.965,y:-0.2,x:2},""], -[{y:-0.65,x:1,a:4,f:3},"Home",{x:1,f:3},"End"], -[{y:-0.75,x:4,f:3},"Delete"], -[{y:-0.9,f:3},"PgUp"], -[{y:-0.7,x:2,a:7},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4,a:4,f:3},"Bksp"], -[{y:-0.9,f:3},"PgDn"], -[{y:-0.7,x:2,f:3},"Tab"], -[{y:-0.65,x:1,f:3},"Shift+\n\n\n\n\n\nTab",{x:1,a:7},""], -[{y:-0.75,x:4,a:4,f:3},"Insert"], -[{y:-0.9,a:7},""], -[{y:-0.75,x:-1,h:1.5},""], -[{y:-0.95,x:2},""], -[{y:-0.65,x:1},"",{x:1},""], -[{y:-0.75,x:4,a:4,f:3},"Prnt Scrn"], -[{y:-0.9,c:"#ffe08d",a:7},""] diff --git a/keyboards/atreus/keymaps/replicaJunction/readme.md b/keyboards/atreus/keymaps/replicaJunction/readme.md deleted file mode 100644 index f1d6c47b132..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/readme.md +++ /dev/null @@ -1,103 +0,0 @@ -# replicaJunction - Atreus Layout - -This layout is designed to make the absolute most out of the Atreus 40% keyboard. - -This layout is probably not perfect for you. That's okay! Use it for ideas as you design your own perfect layout. - -Most of the custom logic in this keyboard is actually not in these files. Instead, it's in the directory `/users/replicaJunction` (from the root of the QMK repo). This allows me to share macros and custom logic between multiple keyboards. A `process_record_keyboard()` function defined weakly in `replicaJunction.h` allows keyboards to process records individually as well without overriding the `process_record_user()` function. (My Ergodox uses this to handle its LEDs, for example.) - -The default letter layout in this keymap is [Colemak-ModDH](https://colemakmods.github.io/mod-dh/). I use the "matrix version" of that layout, which retains the M key on the home row as in normal Colemak. - -## Design Goals - -I designed this layout with the following goals in mind: - -* Nothing may interfere with ordinary typing. -* Symbols need to be accessible quickly and organized in a manner I can remember. -* Limit more difficult finger movements (and pinky usage in general). - -### Nothing may interfere with ordinary typing - -For a long time, this meant that I couldn't use letters or home row keys as dual-role keys. I'm a fast typer, and I'm sometimes already typing the next letter before I've fully released the previous one. Normal keyboards don't care about this, but if I started adding dual-role functionality to letters, I found that I would sometimes type the next letter before releasing the layer toggle, and the letter I tried to send would still be sent under the layer I thought I'd left off. - -Fortunately, though, QMK has addressed this with the `PERMISSIVE_HOLD` flag. [Details are on the QMK docs page.](https://docs.qmk.fm/#/feature_advanced_keycodes?id=permissive-hold) - -Using that flag, I'm comfortable having layer shift keys on the home row, and this goes a long way to eliminate finger stress. - -### Sympols need to be accessible quickly - -Symbols are available under my left hand by holding the I key (on my right hand). I've grouped parenthesis, slashes, and braces together; the remaining symbols are ordered in the same way as they appear on USA keycap legends (for example, 1 is !, so that symbol is first in my lineup). Practically, I just had to get used to these other "misc" symbols. - -This also means that some symbols are accessible in more than one way. For example, the carats (greater than and less than) are available both in the "normal" location (Shift+Comma / Shift+Period) and on the symbol layer. I make regular changes to some of the symbols I don't use as commonly as I think of them. - -### Limit more difficult finger movements - -This is why I kept trying to put layer toggles on the home row keys instead of just placing them on random thumb keys. I suffer from RSI, and it's important for me to watch out for more "stressful" finger movements. - -The home row is the easiest row for your fingers to hit, followed by the upper row, and the lower row is noticeably more difficult to press. Because of this, I favored the upper row over the lower one any time I had the option to do so. - -## Features - -### ZXC Mods - -Keys on the bottom row of each half of this keyboard can be held to send modifier keys. I've tried to map this in a relatively logical manner: - -* Z / Slash: Ctrl -* X / Period: GUI -* C / Comma: Ctrl+Alt -* D / H: Alt - -Combined with Shift keys on the thumbs, this makes all modifiers quick to access on either hand. - -### Layer tap dance - -The lower-left key on the left hand can be used to apply or remove layers based on a number of taps: - -* 1 tap sends Escape, and also disables any persistent layers. -* 2 taps enables the Number pad layer. -* 5 or more taps resets the keyboard. - -## Extend Layer - -[Originally found on the Colemak forums](https://forum.colemak.com/topic/2014-extend-extra-extreme/), having a QMK-powered keyboard allows a super easy implementation of this concept. The idea is to place commonly-used keys under easy reach of your hands. Since I work with text often, my most common needs are things like Ctrl+Shift+arrow keys, and they're easy to access using this layer. (While technically it's four keypresses instead of just three, since it takes one key to enter the layer, that one key is a thumb button and the other three are all on the home row, so I find it much more comfortable than modifiers on a traditional keyboard.) - -Also featured in this layer is easy access to Tab, plus a Shift+Tab key. Alt-Tabbing back and forth, along with Ctrl-Tab, are super easy and friendly. When I need Ctrl+Alt+Delete, I typically use the ones found on this layer. - -## Layout Images - -Colored keys indicate keys that swap to another layer when held. - -These images are located in the `kle` folder of this directory. Also included is the "raw data" from Keyboard-Layout-Editor in a corresponding text file. - -### Base layer - -![Base layer](kle/base-layer.png) - -### R layer - -![R layer](kle/r-layer.png) - -### E layer - -![E layer](kle/i-layer.png) - -### I layer - -![I layer](kle/i-layer.png) - -### Space layer - -![Space layer](kle/space-layer.png) - -### Function layer - -![Function layer](kle/fn-layer.png) - -## Credits - -* [Drashna](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/readme.md) - * User / keymap function ideas -* [Jeremy](https://github.com/qmk/qmk_firmware/blob/master/keyboards/atreus/keymaps/jeremy/readme.md) - * Sanity check on the Function keys (_of course they should be in rows of 4, not rows of 3 like a number pad. Why did I ever use anything else?_) -* [DreymaR of the Colemak forums](https://forum.colemak.com/topic/2014-extend-extra-extreme/) - * Original idea of the Extend layer diff --git a/keyboards/atreus/keymaps/replicaJunction/rules.mk b/keyboards/atreus/keymaps/replicaJunction/rules.mk deleted file mode 100644 index 9ff9c3fbb23..00000000000 --- a/keyboards/atreus/keymaps/replicaJunction/rules.mk +++ /dev/null @@ -1,12 +0,0 @@ -# https://docs.qmk.fm/getting_started_make_guide.html - -MOUSEKEY_ENABLE = yes -TAP_DANCE_ENABLE = yes -# KEY_LOCK_ENABLE = yes -# CONSOLE_ENABLE = no -# COMMAND_ENABLE = no - -# Use the "Unicode map" method -# UNICODE_ENABLE = no -# UNICODEMAP_ENABLE = yes - diff --git a/keyboards/atreus/keymaps/talljoe-atreus/config.h b/keyboards/atreus/keymaps/talljoe-atreus/config.h deleted file mode 100644 index 87b68ffc652..00000000000 --- a/keyboards/atreus/keymaps/talljoe-atreus/config.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H - -#define PREVENT_STUCK_MODIFIERS -#define SPACE_COUNT 2 - -#define TEMPLATE( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K44, K45, K46, K48, K49, K4B, K4C \ -) LAYOUT( \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ - K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K10, K41, K42, K30, K44, K1D, K20, K45, K3C, K0D, K2B, K3D \ -) - -#define TEMPLATE_NUM( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K44, K45, K46, K48, K49, K4B, K4C \ -) LAYOUT( \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ - K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K10, K41, K42, K30, K44, K1D, K20, K45, K48, K49, K2B, K3D \ -) - - -#define TEMPLATE_RESET LAYOUT( \ - RESET , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - RESET , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ -) -#endif diff --git a/keyboards/atreus/keymaps/talljoe-atreus/keymap.c b/keyboards/atreus/keymaps/talljoe-atreus/keymap.c deleted file mode 100644 index 7812add812b..00000000000 --- a/keyboards/atreus/keymaps/talljoe-atreus/keymap.c +++ /dev/null @@ -1 +0,0 @@ -// This space intentionally left blank diff --git a/keyboards/atreus/keymaps/talljoe-atreus/rules.mk b/keyboards/atreus/keymaps/talljoe-atreus/rules.mk deleted file mode 100644 index 92007fe8ad7..00000000000 --- a/keyboards/atreus/keymaps/talljoe-atreus/rules.mk +++ /dev/null @@ -1 +0,0 @@ -USER_NAME := talljoe diff --git a/keyboards/atreus/keymaps/xk/config.h b/keyboards/atreus/keymaps/xk/config.h deleted file mode 100644 index a8b9c880573..00000000000 --- a/keyboards/atreus/keymaps/xk/config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define TAPPING_TOGGLE 1 -#define TAPPING_TERM 300 -#define ONESHOT_TAP_TOGGLE 3 -#define ONESHOT_LAYER_TOGGLE 3 -#define ONESHOT_TIMEOUT 800 - -#define MOUSEKEY_INTERVAL 50 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 - -#define MOUSEKEY_WHEEL_DELAY 0 -#define MOUSEKEY_WHEEL_MAX_SPEED 8 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 - -#define IGNORE_MOD_TAP_INTERRUPT -#define PERMISSIVE_HOLD - -#endif diff --git a/keyboards/atreus/keymaps/xk/keymap.c b/keyboards/atreus/keymaps/xk/keymap.c deleted file mode 100644 index a03dee9ca9d..00000000000 --- a/keyboards/atreus/keymaps/xk/keymap.c +++ /dev/null @@ -1,311 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -#define _COLEMAK 0 -#define _KAMELOC 1 -#define _IKAPILA 2 -#define _IKASHFT 3 -#define _FNCTION 5 -#define _NINEKEY 6 -#define _GAMEQWERTY 7 -#define _MLAYER 8 -#define _GRVTABL 9 - -enum custom_keycodes { - COLEMAK = SAFE_RANGE, - KAMELOC, - IKAPILA, - IKASHFT, - FNCTION, - NINEKEY, - GAMEQWERTY, - MLAYER, - GRVTABL, -}; - -//TD Declarations -enum { -VOM = 0, -PRN, -EGT, -HRD, -XRD, -DSH, -ESC, -EQE, -PGN, -HND, -COD, -UND, -MND, -F11, -F12, -F13, -F14, -F15, -F16, -F17, -F18, -F19, -F20, -//unicode_inputctl -LINUX, -WIN, -WINSH, -OSX, -}; - -// action-TAP for key/mod behavior LT(layer, KC) -#define XK_TAB LT(_KAMELOC, KC_TAB) -#define XK_BSP LT(_KAMELOC, KC_BSPC) - -#define XK_SPC LT(_IKAPILA, KC_SPC) -#define XK_ENT LT(_IKAPILA, KC_ENT) -#define XK_PGDN LT(_IKASHFT, KC_PGDN) -#define XK_APO LT(_IKASHFT, KC_QUOT) -#define XK_PGUP LT(_IKASHFT, KC_PGUP) -#define PIPBOY LT(_FNCTION, KC_BSLS) - -#define XK_DEL LT(_IKASHFT, KC_DEL) -#define XK_ESC LT(_GRVTABL, KC_ESC) - -// mod-TAP for mod/key behavior MT(modkey, KC) -#define ALT_IT MT(MOD_RALT, KC_SCLN) -#define SFT_IT MT(MOD_RSFT, KC_DOT) -#define CTL_IT MT(MOD_RCTL, KC_SLSH) -#define SFT_ENT MT(MOD_RSFT, KC_ENT) - -//sticky modifiers -#define KYCTL OSM(MOD_LCTL) -#define KYSFT OSM(MOD_LSFT) -#define KYALT OSM(MOD_LALT) -#define CAKY OSM(MOD_LCTL | MOD_LALT) - -//shortcuts -#define CADEL LALT(LCTL(KC_DEL)) -#define CAINS LALT(LCTL(KC_INS)) -#define TGNKRO MAGIC_TOGGLE_NKRO - -#define NAVCH LCTL(KC_HOME) -#define NAVCPD LCTL(KC_PGDN) -#define NAVCPU LCTL(KC_PGUP) -#define NAVCE LCTL(KC_END) -#define NAVCU LCTL(KC_UP) -#define NAVCD LCTL(KC_DOWN) -#define NAVCL LCTL(KC_LEFT) -#define NAVCR LCTL(KC_RGHT) -#define NAVGU LGUI(KC_UP) -#define NAVGD LGUI(KC_DOWN) -#define NAVGL LGUI(KC_LEFT) -#define NAVGR LGUI(KC_RGHT) - -#define KC_NDSH LCTL(KC_PMNS) -#define KC_MDSH LALT(LCTL(KC_PMNS)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - TAP - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ Q │ W │ F │ P │ B │ │ J │ L │ U │ Y │ ; │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ A │ R │ S │ T │ G │ │ M │ N │ E │ I │ O │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ X │ C │ D │ V │ Z ├────┐ ┌────┤ K │ H │ , │ . │ / │ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │SFTn│CTLn│ALTn│ROUS│SPC │BKSP│ │TAB │ENT │PGDN│ ' │ \ │ESC │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - HOLD - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ │ │ │ │ │ │ │ │ │ │ALT │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │ │ │ │ │ │ │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ ├────┐ ┌────┤ │ │ │ │CTL │ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │SFT │CTL │ALT │ROUS│L123│L OH│ │L OH│L123│L!@#│ │L FN│LESC│ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - DOUBLETAP - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ │ │ │ │ │ │ │ │ │ │ │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │ │ │ │ │ │ │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ ├────┐ ┌────┤ │ │ │ │ │ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │OSML│OSML│OSML│NADA│ │ │ │ │ │ │ │ │ │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - */ - - // Colemak PB&J (Mod-DH) - [_COLEMAK] = LAYOUT( \ - KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, ALT_IT, \ - KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, \ - KC_X, KC_C, KC_D, KC_V, KC_Z, KC_K, KC_H, KC_COMM, SFT_IT, CTL_IT, \ - KYCTL, KYSFT, KYALT, TT(_MLAYER), XK_SPC, XK_TAB, XK_BSP, XK_ENT, XK_PGDN, XK_APO, PIPBOY, XK_ESC \ - ), - - // useful for one-handed typing - [_KAMELOC] = LAYOUT( \ - KC_SCLN, KC_Y, KC_U, KC_L, KC_J, KC_B, KC_P, KC_F, KC_W, KC_Q, \ - KC_O, KC_I, KC_E, KC_N, KC_M, KC_G, KC_T, KC_S, KC_R, KC_A, \ - KC_SLSH, KC_DOT, KC_COMM, KC_H, KC_K, KC_Z, KC_V, KC_D, KC_C, KC_X, \ - XK_ESC, PIPBOY, TT(_MLAYER), KC_PGDN, KC_ENT, _______, _______, XK_SPC, KC_PGUP, KYALT, KYCTL, KYSFT \ - ), - - /* - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ 1 │ 2 │ 3 │ 4 │ 5 │ │ 6 │ 7 │ 8 │ 9 │ 0 │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ M │ V- │ V+ │NEXT│PLAY│ │ ← │ ↓ │ ↑ │ → │DASH│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ - │ = │ ` │GUI │UNDO├────┐ ┌────┤HOME│END │HOME│INS │ \ │ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │ │ │ │ │GUI │ │ │ │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - */ - - [_IKAPILA] = LAYOUT( \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_MUTE, KC_VOLD, KC_VOLU, TD(MND), KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TD(DSH), \ - KC_MINS, KC_EQL, KC_GRV, KC_LGUI, LCTL(KC_Z), TD(HND), KC_HOME, TD(HND), KC_INS, KC_BSLS, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_LGUI, _______, _______, KYSFT \ - ), - - /* - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ ! │ @ │ # │ $ │ % │ │ ^ │ & │ * │ ( │ ) │ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │PSCR│ ← │ ↓ │ ↑ │ → │ │NEXT│PGUP│ V+ │ V- │DASH│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ _ │ + │ ~ │HOME│END ├────┐ ┌────┤ {} │ () │ <> │ [ │ ] │ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │DEL │ │BKSP│ │ │ │ │ │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - */ - - [_IKASHFT] = LAYOUT( \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_PSCR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TD(MND), KC_PGUP, KC_VOLU, TD(VOM), KC_MDSH, \ - KC_UNDS, KC_PLUS, KC_TILD, KC_HOME, KC_END, M(1), M(0), M(5), KC_LBRC, KC_RBRC, \ - _______, _______, _______, _______, _______, KC_BSPC, KC_DEL, _______, _______, _______, _______, _______ \ - ), - - /* - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │ F1 │ F2 │ F3 │ F4 │ F5 │ │ F6 │ F7 │ F8 │ F9 │ F10│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ F21│ F22│ F23│ F24│PAUS│ │ │SCLK│BOOT│ │NKRO│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ ├────┐ ┌────┤ │ │ │ │CAPS│ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │ │ │ │ │ │ │ │ │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - */ - - [_FNCTION] = LAYOUT( \ - TD(F11), TD(F12), TD(F13), TD(F14), TD(F15), TD(F16), TD(F17), TD(F18), TD(F19), TD(F20), \ - KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_SLCK, XXXXXXX, XXXXXXX, TGNKRO, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ), - - [_GAMEQWERTY] = LAYOUT( \ - KC_P, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, \ - KC_SCLN, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, \ - KC_SLSH, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, TD(COD), \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ), - - /* - ┌────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┐ - │^HOM│^PGD│^UP │^PGU│^PGU│ │ │MW_L│ MU │MW_R│ AC2│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │^END│^LFT│^DWN│^RGT│^PGD│ │ │ ML │ MD │ MR │ AC1│ - ├────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┤ - │ M5 │ M2 │ M4 │ M3 │ M1 ├────┐ ┌────┤ │MW_D│MW_U│ │ AC0│ - ├────┼────┼────┼────┼────┤ │ │ ├────┼────┼────┼────┼────┤ - │ │ │ │ │ │ │ │ │ │ │ │ │ │ - └────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ - */ - - [_MLAYER] = LAYOUT( \ - LALT(KC_ESC), KC_9, KC_8, KC_7, KC_6, M(1), M(0), KC_MS_U, M(0), M(2), \ - KC_0, KC_2, KC_3, KC_4, KC_5, M(5), KC_MS_L, KC_MS_D, KC_MS_R, KC_ACL2, \ - KC_1, KC_0, XXXXXXX, XXXXXXX, KC_BTN5, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, M(5), \ - _______, _______, _______, _______, KC_BTN1, KC_BTN2, KC_BTN2, KC_BTN1, KC_BTN2, _______, KC_ACL0, _______ \ - ), - - //one_ring=2__rule__them-all - [_GRVTABL] = LAYOUT( \ - LALT(KC_PSCR), M(4), KC_PWR, KC_POWER, RESET, RESET, KC_R, KC_E, KC_I, LALT(KC_PSCR), \ - TG(_NINEKEY), TG(_FNCTION), TG(_MLAYER), TG(_IKASHFT), TG(_IKAPILA), TG(_IKAPILA), KC_S, KC_U, KC_B, TG(_NINEKEY), \ - M(3), TG(_GAMEQWERTY), XXXXXXX, XXXXXXX, XXXXXXX, KC_MYCM, KC_CALC, XXXXXXX, TG(_GAMEQWERTY), M(3), \ - TT(_GRVTABL), TG(_FNCTION), TG(_MLAYER), TG(_IKASHFT), TG(_IKAPILA), _______, _______, TG(_IKAPILA), TG(_IKASHFT), TG(_MLAYER), TG(_MLAYER), TG(_NINEKEY) \ - ), -}; - -qk_tap_dance_action_t tap_dance_actions[] = { - [VOM] = ACTION_TAP_DANCE_DOUBLE(KC_VOLD, KC_MUTE), - [PRN] = ACTION_TAP_DANCE_DOUBLE(KC_LPRN, KC_RPRN), - [EGT] = ACTION_TAP_DANCE_DOUBLE(KC_LCBR, KC_RCBR), - [HRD] = ACTION_TAP_DANCE_DOUBLE(KC_LBRC, KC_RBRC), - [DSH] = ACTION_TAP_DANCE_DOUBLE(KC_NDSH, KC_MDSH), - [ESC] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, LALT(KC_F4)), - [EQE] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, KC_ENT), - [UND] = ACTION_TAP_DANCE_DOUBLE(KC_Z, LCTL(KC_Z)), - [PGN] = ACTION_TAP_DANCE_DOUBLE(KC_PGDN, KC_PGUP), - [HND] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END), - [COD] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT), - [MND] = ACTION_TAP_DANCE_DOUBLE(KC_MNXT, KC_MPRV), - [F11] = ACTION_TAP_DANCE_DOUBLE(KC_F1, KC_F11), - [F12] = ACTION_TAP_DANCE_DOUBLE(KC_F2, KC_F12), - [F13] = ACTION_TAP_DANCE_DOUBLE(KC_F3, KC_F13), - [F14] = ACTION_TAP_DANCE_DOUBLE(KC_F4, KC_F14), - [F15] = ACTION_TAP_DANCE_DOUBLE(KC_F5, KC_F15), - [F16] = ACTION_TAP_DANCE_DOUBLE(KC_F6, KC_F16), - [F17] = ACTION_TAP_DANCE_DOUBLE(KC_F7, KC_F17), - [F18] = ACTION_TAP_DANCE_DOUBLE(KC_F8, KC_F18), - [F19] = ACTION_TAP_DANCE_DOUBLE(KC_F9, KC_F19), - [F20] = ACTION_TAP_DANCE_DOUBLE(KC_F10, KC_F20), -}; - -void matrix_init_user(){ - set_unicode_input_mode(UC_LNX); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - return MACRO( D(LSFT), T(9), U(LSFT), D(LSFT), T(0), U(LSFT), T(LEFT), END ); - case 1: - return MACRO( D(LSFT), T(LBRC), U(LSFT), D(LSFT), T(RBRC), U(LSFT), T(LEFT), END ); - case 2: - return MACRO( T(LBRC), T(RBRC), T(LEFT), END); - case 5: - return MACRO( D(LSFT), T(COMMA), U(LSFT), D(LSFT), T(DOT), U(LSFT), END ); - case 3: - clear_keyboard(); - return false; - break; - case 4: - return MACRO( D(LSFT), T(SCOLON), U(LSFT), D(LSFT), T(9), U(LSFT), D(LSFT), T(0), U(LSFT), D(LSFT), T(LBRACKET), U(LSFT), D(LSFT), T(9), U(LSFT), D(LSFT), T(SCOLON), U(LSFT), D(LSFT), T(0), U(LSFT), D(LSFT), T(BSLASH), U(LSFT), D(LSFT), T(SCOLON), U(LSFT), D(LSFT), T(7), U(LSFT), D(LSFT), T(RBRACKET), U(LSFT), T(SCOLON), D(LSFT), T(SCOLON), U(LSFT), END ); - case WINSH: - set_unicode_input_mode(UC_WIN); - return false; - break; - case WIN: - set_unicode_input_mode(UC_WINC); - return false; - break; - case OSX: - set_unicode_input_mode(UC_OSX); - return false; - break; - } - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/xk/rules.mk b/keyboards/atreus/keymaps/xk/rules.mk deleted file mode 100644 index 5b69426acab..00000000000 --- a/keyboards/atreus/keymaps/xk/rules.mk +++ /dev/null @@ -1,15 +0,0 @@ -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -TAP_DANCE_ENABLE = yes - -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) - diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c deleted file mode 100644 index fe1ca295d86..00000000000 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,215 +0,0 @@ -// This is the personal keymap of Ian Sterling (@xyverz). It is based on the keymap by -// Chris Gerber (@gerbercj), with the addition of persistent layers like the Planck and -// Preonic keyboards by Jack Humbert. - -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DVORAK 0 -#define _QWERTY 1 -#define _COLEMAK 2 -#define _DVORMAC 3 -#define _LOWER 4 -#define _RAISE 5 -#define _ADJUST 16 - -enum planck_keycodes { - DVORAK = SAFE_RANGE, - QWERTY, - COLEMAK, - DVORMAC, - LOWER, - RAISE, - BACKLIT -}; - -// Adding macros to make the keymaps below much easier to read. -#define SFTSCLN SFT_T(KC_SCLN) -#define SFTSLSH SFT_T(KC_SLSH) -#define SFTZED SFT_T(KC_Z) -#define ALTENT ALT_T(KC_ENT) -#define ESCTRL CTL_T(KC_ESC) -#define TABALT ALT_T(KC_TAB) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Dvorak Layer - ,----------------------------------. ,----------------------------------. - | ' | , | . | P | Y | | F | G | C | R | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | O | E | U | I | | D | H | T | N | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |SFT/ ;| Q | J | K | X | CTRL ||Alt / | B | M | W | V |SFT/ Z| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | - `----------------------------------' `----------------------------------' */ - [_DVORAK] = LAYOUT( - KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L , - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S , - SFTSCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, SFTZED , - ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, KC_LCTL, ALTENT, KC_SPC, RAISE, KC_MINS, KC_SLSH, KC_BSLS - ), - - /* QWERTY Layer - ,----------------------------------. ,----------------------------------. - | Q | W | E | R | T | | Y | U | I | O | P | - |------+------+------+------+------| |------+------+------+------+------| - | A | S | D | F | G | | H | J | K | L | ; | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |SFT/ Z| X | C | V | B | CTRL ||Alt / | N | M | , | . |SFT/ /| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | - `----------------------------------' `----------------------------------' */ - [_QWERTY] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - SFTZED, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SFTSLSH, - ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, KC_LCTL, ALTENT, KC_SPC, RAISE, KC_MINS, KC_QUOT, KC_BSLS - ), - - /* Colemak Layer - ,----------------------------------. ,----------------------------------. - | Q | W | F | P | G | | J | L | U | Y | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | R | S | T | D | | H | N | E | I | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |SFT/ Z| X | C | V | B | CTRL ||Alt / | K | M | , | . |SFT/ /| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | - `----------------------------------' `----------------------------------'*/ - [_COLEMAK] = LAYOUT( - KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, - KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O , - SFTZED, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, SFTSLSH, - ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, KC_LCTL, ALTENT, KC_SPC, RAISE, KC_MINS, KC_QUOT, KC_BSLS - ), - - /* Dvorak Layer with Command key on left thumb instead of Control - ,----------------------------------. ,----------------------------------. - | ' | , | . | P | Y | | F | G | C | R | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | O | E | U | I | | D | H | T | N | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |SFT/ ;| Q | J | K | X | CMD ||Alt / | B | M | W | V |SFT/ Z| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | - `----------------------------------' `----------------------------------' */ - [_DVORMAC] = LAYOUT( - KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L , - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S , - SFTSCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, SFTZED , - ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, KC_LGUI, ALTENT, KC_SPC, RAISE, KC_MINS, KC_SLSH, KC_BSLS - ), - - /* LOWER Layer - ,----------------------------------. ,----------------------------------. - | ! | @ | # | $ | % | | ^ | & | * | ( | ) | - |------+------+------+------+------| |------+------+------+------+------| - | CAPS | | UP | | Home | | PgDn | | + | { | } | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | | Left | Down | Right| End | || | PgUp | Mute | Vol- | Vol+ | | - |------+------+------+------+------| || |------+------+------+------+------| - | ~ | | | | Del |------'`------| Ins | | | | | - `----------------------------------' `----------------------------------'*/ - [_LOWER] = LAYOUT( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, - KC_CAPS, _______, KC_UP, _______, KC_HOME, KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR, - _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, - KC_TILD, _______, _______, _______, KC_DEL, _______, _______, KC_INS, _______, _______, _______, _______ - ), - - /* RAISE Layer - ,----------------------------------. ,----------------------------------. - | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - |------+------+------+------+------| |------+------+------+------+------| - | CAPS | | UP | | Home | | PgDn | | = | [ | ] | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | | Left | Down | Right| End | || | PgUp | Prev | Play | Next | | - |------+------+------+------+------| || |------+------+------+------+------| - | ` | | | | Del |------'`------| Ins | | | | | - `----------------------------------' `----------------------------------'*/ - [_RAISE] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 , - KC_CAPS, _______, KC_UP, _______, KC_HOME, KC_PGUP, _______, KC_EQL, KC_LBRC, KC_RBRC, - _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, _______, - KC_GRV, _______, _______, _______, KC_DEL, _______, _______, KC_INS, _______, _______, _______, _______ - ), - - /* ADJUST Layer - ,----------------------------------. ,----------------------------------. - | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | - |------+------+------+------+------| |------+------+------+------+------| - | F11 | | | | | | | PrSc | ScLk | Paus | F12 | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | |QWERTY|COLEMK|DVORAK|DVORMC| || | | | | | | - |------+------+------+------+------| || |------+------+------+------+------| - | | | | | |------'`------| | | | | RESET| - `----------------------------------' `----------------------------------'*/ - [_ADJUST] = LAYOUT( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 , - KC_F11, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_F12 , - _______, QWERTY, COLEMAK, DVORAK, DVORMAC, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET - ), -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case DVORMAC: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DVORMAC); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; -}; diff --git a/keyboards/atreus/keymaps/xyverz/readme.md b/keyboards/atreus/keymaps/xyverz/readme.md deleted file mode 100644 index ec7d836c173..00000000000 --- a/keyboards/atreus/keymaps/xyverz/readme.md +++ /dev/null @@ -1,107 +0,0 @@ -# Xyverz's Atreus Keymap - -## About this keymap: - -This is the second iteration of my Atreus keymap. The first one was as close to the planck as I could get at the -time, but still very much like the original Atreus keymap. I've managed to get things working better now and have -implemented (more like copied) the RAISE/LOWER/ADJUST layers. This is a work in progress, but I think I'm closer -to a final go with this. - -I'm using MOD_TAP quite a bit in this keymap. On all layers, R4 pinky keys use mod-tap and are SHIFT when held -and their normal keys when tapped. In addition, ESC and TAB are also set as Ctrl and ALT respectively when held, -and Enter/ALT on the right thumb key for all layers. - -I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. - -Recently added: Documentation, Formatting, and another Dvorak layer that has Command on the left thumb, instead of -Control. - -## Still to do: - - * Enjoy this revision; figure out new things later. - -### Layer 0: Dvorak layer - - ,----------------------------------. ,----------------------------------. - | ' | , | . | P | Y | | F | G | C | R | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | O | E | U | I | | D | H | T | N | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |Shft ;| Q | J | K | X | CTRL ||Alt / | B | M | W | V |Shft Z| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | - `----------------------------------' `----------------------------------' - -### Layer 1: QWERTY layer - - ,----------------------------------. ,----------------------------------. - | Q | W | E | R | T | | Y | U | I | O | P | - |------+------+------+------+------| |------+------+------+------+------| - | A | S | D | F | G | | H | J | K | L | ; | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |Shft Z| X | C | V | B | CTRL ||Alt / | N | M | , | . |Shft /| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | - `----------------------------------' `----------------------------------' - -### Keymap 2: Colemak layer - - ,----------------------------------. ,----------------------------------. - | Q | W | F | P | G | | J | L | U | Y | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | R | S | T | D | | H | N | E | I | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |Shft Z| X | C | V | B | CTRL ||Alt / | K | M | , | . |Shft /| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | - `----------------------------------' `----------------------------------' - -### Keymap 3: Dvorak for Mac layout - - ,----------------------------------. ,----------------------------------. - | ' | , | . | P | Y | | F | G | C | R | L | - |------+------+------+------+------| |------+------+------+------+------| - | A | O | E | U | I | | D | H | T | N | S | - |------+------+------+------+------|------.,------|------+------+------+------+------| - |SFT/ ;| Q | J | K | X | CMD ||Alt / | B | M | W | V |SFT/ Z| - |------+------+------+------+------| ||Enter |------+------+------+------+------| - | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | - `----------------------------------' `----------------------------------' - -### Keymap 4: LOWER layer - - ,----------------------------------. ,----------------------------------. - | ! | @ | # | $ | % | | ^ | & | * | ( | ) | - |------+------+------+------+------| |------+------+------+------+------| - | CAPS | | UP | | Home | | PgDn | | + | { | } | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | | Left | Down | Right| End | || | PgUp | Mute | Vol- | Vol+ | | - |------+------+------+------+------| || |------+------+------+------+------| - | ~ | | | | Del |------'`------| Ins | | | | | - `----------------------------------' `----------------------------------' - - -### Keymap 5: RAISE layer - - ,----------------------------------. ,----------------------------------. - | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - |------+------+------+------+------| |------+------+------+------+------| - | CAPS | | UP | | Home | | PgDn | | = | [ | ] | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | | Left | Down | Right| End | || | PgUp | Prev | Play | Next | | - |------+------+------+------+------| || |------+------+------+------+------| - | ` | | | | Del |------'`------| Ins | | | | | - `----------------------------------' `----------------------------------' - -### Keymap 6: ADJUST layer - - ,----------------------------------. ,----------------------------------. - | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | - |------+------+------+------+------| |------+------+------+------+------| - | F11 | | | | | | | PScr | SLck | Paus | F12 | - |------+------+------+------+------|------.,------|------+------+------+------+------| - | |QWERTY|COLEMK|DVORAK|DVORMC| || | | | | | | - |------+------+------+------+------| || |------+------+------+------+------| - | | | | | |------'`------| | | | | RESET| - `----------------------------------' `----------------------------------' - diff --git a/keyboards/atreus/keymaps/yttyx/README.md b/keyboards/atreus/keymaps/yttyx/README.md deleted file mode 100644 index aac02c6c11f..00000000000 --- a/keyboards/atreus/keymaps/yttyx/README.md +++ /dev/null @@ -1,103 +0,0 @@ -# Overview - -This layout is based on Balance Twelve (mirror variant) by Sasha Viminitz. Please see [this page](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/) -for more information. It's designed for left-handers who use their right hand for the mouse. - -## To build - -``` -sudo make atreus:yttyx -``` - -## To flash (example) - -``` -sudo avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_yttyx.hex -P /dev/ttyACM0 -``` - -## Layers - -### Base: - - .--------.-------.-------.-------.--------. .-------.-------.-------.-------.------. - | P | L | C | D | W | | U | O | Y | K | Q | - |--------+-------+-------+-------+--------| |-------+-------+-------+-------+------| - | N | R | S | T | M | | A | E | I | H | V | - |--------+-------+-------+-------+--------| |-------+-------+-------+-------+------| - | Z Sft | J Ctl | F Alt | G | B | | , | . Alt | ; Ctl | X Sft | Sup | - '--------'-------'-------+-------+--------+-----. .-----+-------+-------+-------'-------'------' - | BS P1 | Spc P2 | P3 | | | Sft | | - '-------'--------'-----' '-----'-------'-------' - -### P1: Punctuation (1) - - - .--------.-------.-------.-------.-------. .------.-------.-------.-------.------. - | Esc | | | | RS | | | | / | ^ | | ~ | - |--------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Tab | | | | | | & | \ | ` | $ | Ent | - |--------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | | | % | Alt | Ctl | Sft | Sup | - '--------'-------'-------+-------+-------+-----. .-----+------+-------+-------'-------'------' - | P1 | | | | | Sft | | - '-------'-------'-----' '-----'------'-------' - -### P2: Punctuation (2) - - .-------.-------.-------.-------.-------. .-------.-------.-------.-------.------. - | Esc | | NC | FV | | | ( | ) | " | ? | | - |-------+-------+-------+-------+-------| |-------+-------+-------+-------+------| - | Tab | Ctl-X | Ctl-C | Ctl-V | Ctl-Z | | { | } | ' | ! | Ent | - |-------+-------+-------+-------+-------| |-------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | Ent | | # | Alt | Ctl | Sft | Sup | - '-------'-------'-------+-------+-------+-----. .-----+-------+-------+-------'-------'------' - | BS | P2 | | | | Sft | | - '-------'-------'-----' '-----'-------'-------' - -### P3: Punctuation (3) - - .-------.-------.-------.-------.-------. .------.-------.-------.-------.------. - | Esc | | Break | Pscr | ScLk | | < | > | + | _ | = | - |-------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Tab | | | Caps | | | [ | ] | * | - | Ent | - |-------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | | | @ | Alt | Ctl | Sft | Sup | - '-------'-------'-------+-------+-------+-----. .-----+------+-------+-------'-------'------' - | BS | | P3 | | | Sft | | - '-------'-------'-----' '-----'------'-------' - -### Numerals / Cursor control - - .-------.-------.-------.------.-------. .------.-------.-------.------.------. - | 1 | 2 | 3 | 4 | 5 | | Home | Up | End | PgUp | | - |-------+-------+-------+------+-------| |------+-------+-------+------+------| - | 6 | 7 | 8 | 9 | 0 | | Left | Down | Right | PgDn | | - |-------+-------+-------+------+-------| |------+-------+-------+------+------| - | Sft | Ctl | Alt | Del | . | | Ins | Alt | Ctl | Sft | Sup | - '-------'-------'-------+------+-------+-----. .-----+------+-------+-------'------'------' - | BS | BA | | | | Sft | | - '------'-------'-----' '-----'------'-------' - -### FV: Function keys / Cursor control (Vim) - - .-------.------.-------.-----.-------. .------.-------.-----.-------.------. - | F1 | F2 | F3 | F4 | F5 | | 0 | K | $ | Ctl-B | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | F6 | F7 | F8 | F9 | F10 | | H | J | L | Ctl-F | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | Sft | Ctl | Alt | F11 | F12 | | | Alt | Ctl | Sft | Sup | - '-------'------'-------+-----+-------+-----. .-----+------+-------+-----'-------'------' - | BS | BA | | | | Sft | | - '-----'-------'-----' '-----'------'-------' - -### RS: Reset - - .-------.------.-------.-----.-------. .------.-------.-----.-------.------. - | RESET | | | | | | | | | | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | | | | | | | | | | | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | | | | | | | | | | | | - '-------'------'-------+-----+-------+-----. .-----+------+-------+-----'-------'------' - | | BA | | | | | | - '-----'-------'-----' '-----'------'-------' diff --git a/keyboards/atreus/keymaps/yttyx/config.h b/keyboards/atreus/keymaps/yttyx/config.h deleted file mode 100644 index b9e113ec0bb..00000000000 --- a/keyboards/atreus/keymaps/yttyx/config.h +++ /dev/null @@ -1,4 +0,0 @@ -#pragma once -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION diff --git a/keyboards/atreus/keymaps/yttyx/keymap.c b/keyboards/atreus/keymaps/yttyx/keymap.c deleted file mode 100644 index dad36cad928..00000000000 --- a/keyboards/atreus/keymaps/yttyx/keymap.c +++ /dev/null @@ -1,159 +0,0 @@ - -#include QMK_KEYBOARD_H - -enum layers { - BA, // Base (Balance Twelve mirror variant) - P1, // Punctuation (1) - P2, // Punctuation (2) - P3, // Punctuation (2) - NC, // Numerals / Cursor control - FV, // Function keys / Cursor control (Vim) - RS // Reset -}; - -// Abbreviations - base -#define KX_P1_BSPC LT(P1, KC_BSPC) -#define KX_P2_SPC LT(P2, KC_SPC) - -#define KX_SFT_Z MT(MOD_LSFT, KC_Z) -#define KX_CTL_J MT(MOD_LCTL, KC_J) -#define KX_ALT_F MT(MOD_LALT, KC_F) - -#define KX_ALT_DOT MT(MOD_LALT, KC_DOT) -#define KX_CTL_SCLN MT(MOD_LCTL, KC_SCLN) -#define KX_SFT_X MT(MOD_LSFT, KC_X) - -#define KX_AT LSFT(KC_QUOT) -#define KX_DQUOT LSFT(KC_2) -#define KX_PIPE LSFT(KC_NUBS) -#define KX_TILDA LSFT(KC_NUHS) - - -const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = { - /* - .--------.-------.-------.-------.--------. .-------.-------.-------.-------.------. - | P | L | C | D | W | | U | O | Y | K | Q | - |--------+-------+-------+-------+--------| |-------+-------+-------+-------+------| - | N | R | S | T | M | | A | E | I | H | V | - |--------+-------+-------+-------+--------| |-------+-------+-------+-------+------| - | Z Sft | J Ctl | F Alt | G | B | | , | . Alt | ; Ctl | X Sft | Sup | - '--------'-------'-------+-------+--------+-----. .-----+-------+-------+-------'-------'------' - | BS P1 | Spc P2 | P3 | | | Sft | | - '-------'--------'-----' '-----'-------'-------' - */ - [BA] = LAYOUT( - KC_P, KC_L, KC_C, KC_D, KC_W, KC_U, KC_O, KC_Y, KC_K, KC_Q, - KC_N, KC_R, KC_S, KC_T, KC_M, KC_A, KC_E, KC_I, KC_H, KC_V, - KX_SFT_Z, KX_CTL_J, KX_ALT_F, KC_G, KC_B, KC_COMM, KX_ALT_DOT, KX_CTL_SCLN, KX_SFT_X, KC_LGUI, - XXXXXXX, XXXXXXX, XXXXXXX, KX_P1_BSPC, KX_P2_SPC, MO(P3), XXXXXXX, KC_RSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* P1: Punctuation (1) - .--------.-------.-------.-------.-------. .------.-------.-------.-------.------. - | Esc | | | | RS | | | | / | ^ | | ~ | - |--------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Tab | | | | | | & | \ | ` | $ | Ent | - |--------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | | | % | Alt | Ctl | Sft | Sup | - '--------'-------'-------+-------+-------+-----. .-----+------+-------+-------'-------'------' - | P1 | | | | | Sft | | - '-------'-------'-----' '-----'------'-------' - */ - [P1] = LAYOUT( - KC_ESC, XXXXXXX, XXXXXXX, XXXXXXX, TO(RS), KX_PIPE, KC_SLSH, KC_CIRC, KC_HASH, KX_TILDA, - KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_AMPR, KC_NUBS, KC_GRV, KC_DLR, KC_ENT, - KC_LSFT, KC_LCTL, KC_LALT, KC_DEL, XXXXXXX, KC_PERC, KC_LALT, KC_LCTL, KC_LSFT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* P2: Punctuation (2) - .-------.-------.-------.-------.-------. .-------.-------.-------.-------.------. - | Esc | | NC | FV | | | ( | ) | " | ? | | - |-------+-------+-------+-------+-------| |-------+-------+-------+-------+------| - | Tab | Ctl-X | Ctl-C | Ctl-V | Ctl-Z | | { | } | ' | ! | Ent | - |-------+-------+-------+-------+-------| |-------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | Ent | | # | Alt | Ctl | Sft | Sup | - '-------'-------'-------+-------+-------+-----. .-----+-------+-------+-------'-------'------' - | BS | P2 | | | | Sft | | - '-------'-------'-----' '-----'-------'-------' - */ - [P2] = LAYOUT( - KC_ESC, XXXXXXX, TO(NC), TO(FV), XXXXXXX, KC_LPRN, KC_RPRN, KX_DQUOT, KC_QUES, XXXXXXX, - KC_TAB, LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_Z), KC_LCBR, KC_RCBR, KC_QUOT, KC_EXLM, KC_ENT, - KC_LSFT, KC_LCTL, KC_LALT, KC_DEL, KC_ENT, KC_NUHS, KC_LALT, KC_LCTL, KC_LSFT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, _______, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* P3: Punctuation (3) - .-------.-------.-------.-------.-------. .------.-------.-------.-------.------. - | Esc | | Break | Pscr | ScLk | | < | > | + | _ | = | - |-------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Tab | | | Caps | | | [ | ] | * | - | Ent | - |-------+-------+-------+-------+-------| |------+-------+-------+-------+------| - | Sft | Ctl | Alt | Del | | | @ | Alt | Ctl | Sft | Sup | - '-------'-------'-------+-------+-------+-----. .-----+------+-------+-------'-------'------' - | BS | | P3 | | | Sft | | - '-------'-------'-----' '-----'------'-------' - */ - [P3] = LAYOUT( - KC_ESC, XXXXXXX, KC_BRK, KC_PSCR, KC_SLCK, KC_LABK, KC_RABK, KC_PLUS, KC_UNDS, KC_EQL, - KC_TAB, XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX, KC_LBRC, KC_RBRC, KC_ASTR, KC_MINS, KC_ENT, - KC_LSFT, KC_LCTL, KC_LALT, KC_DEL, XXXXXXX, KX_AT, KC_LALT, KC_LCTL, KC_LSFT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* NC: Numerals / Cursor control - .-------.-------.-------.------.-------. .------.-------.-------.------.------. - | 1 | 2 | 3 | 4 | 5 | | Home | Up | End | PgUp | | - |-------+-------+-------+------+-------| |------+-------+-------+------+------| - | 6 | 7 | 8 | 9 | 0 | | Left | Down | Right | PgDn | | - |-------+-------+-------+------+-------| |------+-------+-------+------+------| - | Sft | Ctl | Alt | Del | . | | Ins | Alt | Ctl | Sft | Sup | - '-------'-------'-------+------+-------+-----. .-----+------+-------+-------'------'------' - | BS | BA | | | | Sft | | - '------'-------'-----' '-----'------'-------' - */ - [NC] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, - KC_6, KC_7, KC_8, KC_9, KC_0, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX, - KC_LSFT, KC_LCTL, KC_LALT, KC_DEL, KC_DOT, KC_INS, KC_LALT, KC_LCTL, KC_LSFT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* FV: Function keys / Cursor control (Vim) - .-------.------.-------.-----.-------. .------.-------.-----.-------.------. - | F1 | F2 | F3 | F4 | F5 | | 0 | K | $ | Ctl-B | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | F6 | F7 | F8 | F9 | F10 | | H | J | L | Ctl-F | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | Sft | Ctl | Alt | F11 | F12 | | | Alt | Ctl | Sft | Sup | - '-------'------'-------+-----+-------+-----. .-----+------+-------+-----'-------'------' - | BS | BA | | | | Sft | | - '-----'-------'-----' '-----'------'-------' - */ - [FV] = LAYOUT( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_0, KC_K, KC_DLR, LCTL(KC_B), XXXXXXX, - KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_H, KC_J, KC_L, LCTL(KC_F), XXXXXXX, - KC_LSFT, KC_LCTL, KC_LALT, KC_F11, KC_F12, XXXXXXX, KC_LALT, KC_LCTL, KC_LSFT, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* RS: Reset - .-------.------.-------.-----.-------. .------.-------.-----.-------.------. - | RESET | | | | | | | | | | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | | | | | | | | | | | | - |-------+------+-------+-----+-------| |------+-------+-----+-------+------| - | | | | | | | | | | | | - '-------'------'-------+-----+-------+-----. .-----+------+-------+-----'-------'------' - | | BA | | | | | | - '-----'-------'-----' '-----'------'-------' - */ - [RS] = LAYOUT( - RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TO(BA), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ) -}; - diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md deleted file mode 100644 index 5cd797da96f..00000000000 --- a/keyboards/atreus/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -Atreus -====== - -A small mechanical keyboard that is based around the shape of the human hand. - -Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy) -Hardware Supported: Atreus, PCB-based or hand-wired -Hardware Availability: https://atreus.technomancy.us - -These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below. - -A-Star:\ -`make atreus:default:avrdude` - -Teensy:\ -`make TEENSY2=yes atreus:default:teensy` - -If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g. - -`make PCBDOWN=yes atreus:default:avrdude` - -*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.* - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk deleted file mode 100644 index eda77404a02..00000000000 --- a/keyboards/atreus/rules.mk +++ /dev/null @@ -1,88 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -ifdef TEENSY2 - BOOTLOADER = halfkay - OPT_DEFS += -DATREUS_TEENSY2 -else - BOOTLOADER = caterina - OPT_DEFS += -DATREUS_ASTAR - ifdef PCBDOWN - OPT_DEFS += -DPCBDOWN - endif -endif - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/atreus62/atreus62.c b/keyboards/atreus62/atreus62.c deleted file mode 100644 index ba5bce98992..00000000000 --- a/keyboards/atreus62/atreus62.c +++ /dev/null @@ -1 +0,0 @@ -#include "atreus62.h" \ No newline at end of file diff --git a/keyboards/atreus62/atreus62.h b/keyboards/atreus62/atreus62.h deleted file mode 100644 index 4bf7dabc7dc..00000000000 --- a/keyboards/atreus62/atreus62.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef ATREUS62_H -#define ATREUS62_H - -#include "quantum.h" - -void promicro_bootloader_jmp(bool program); - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ - { k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ -} - -// Used to create a keymap using only KC_ prefixed keys. -#define LAYOUT_kc( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ -) \ -{ \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_NO, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k47, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45, KC_##k46, KC_##k48, KC_##k49, KC_##k4a, KC_##k4b, KC_##k4c, KC_##k4d } \ -} - -#endif diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h deleted file mode 100644 index a7fe5f35429..00000000000 --- a/keyboards/atreus62/config.h +++ /dev/null @@ -1,76 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6062 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Profet -#define PRODUCT Atreus62 -#define DESCRIPTION q.m.k. keyboard firmware for Atreus62 - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 5 -#define MATRIX_COLS 13 - -// wiring of each half -#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/atreus62/info.json b/keyboards/atreus62/info.json deleted file mode 100644 index 5a7ed3754ba..00000000000 --- a/keyboards/atreus62/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atreus62", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5.7, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.6}, {"x":2, "y":0.35}, {"x":3, "y":0}, {"x":4, "y":0.35}, {"x":5, "y":0.7}, {"x":9, "y":0.7}, {"x":10, "y":0.35}, {"x":11, "y":0}, {"x":12, "y":0.35}, {"x":13, "y":0.6}, {"x":14, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.6}, {"x":2, "y":1.35}, {"x":3, "y":1}, {"x":4, "y":1.35}, {"x":5, "y":1.7}, {"x":9, "y":1.7}, {"x":10, "y":1.35}, {"x":11, "y":1}, {"x":12, "y":1.35}, {"x":13, "y":1.6}, {"x":14, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.6}, {"x":2, "y":2.35}, {"x":3, "y":2}, {"x":4, "y":2.35}, {"x":5, "y":2.7}, {"x":9, "y":2.7}, {"x":10, "y":2.35}, {"x":11, "y":2}, {"x":12, "y":2.35}, {"x":13, "y":2.6}, {"x":14, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.6}, {"x":2, "y":3.35}, {"x":3, "y":3}, {"x":4, "y":3.35}, {"x":5, "y":3.7}, {"x":9, "y":3.7}, {"x":10, "y":3.35}, {"x":11, "y":3}, {"x":12, "y":3.35}, {"x":13, "y":3.6}, {"x":14, "y":3.6}, {"x":0, "y":4.6}, {"x":1, "y":4.6}, {"x":2, "y":4.35}, {"x":3, "y":4}, {"x":4, "y":4.35}, {"x":5, "y":4.7}, {"x":6, "y":3.95, "h":1.5}, {"x":8, "y":3.95, "h":1.5}, {"x":9, "y":4.7}, {"x":10, "y":4.35}, {"x":11, "y":4}, {"x":12, "y":4.35}, {"x":13, "y":4.6}, {"x":14, "y":4.6}] - } - } -} diff --git a/keyboards/atreus62/keymaps/194h/config.h b/keyboards/atreus62/keymaps/194h/config.h deleted file mode 100644 index f5306a07f18..00000000000 --- a/keyboards/atreus62/keymaps/194h/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#pragma once -#define ONESHOT_TIMEOUT 3000 -#define TAPPING_TERM 200 -#define FORCE_NKRO -#define LEADER_TIMEOUT 1000 -#define TAPPING_TOGGLE 3 diff --git a/keyboards/atreus62/keymaps/194h/keymap.c b/keyboards/atreus62/keymaps/194h/keymap.c deleted file mode 100644 index 1d069e9d423..00000000000 --- a/keyboards/atreus62/keymaps/194h/keymap.c +++ /dev/null @@ -1,149 +0,0 @@ -#include QMK_KEYBOARD_H - -//The current Nordic and Norwegian layout files are a mess. I'll do it myself: -//Norwegian -#define NO_AE KC_QUOT // Æ -#define NO_AO KC_LBRC // Å -#define NO_BSLS KC_EQL // Backslash -#define NO_LT KC_NUBS // < -#define NO_MINS KC_SLSH // - -#define NO_OE KC_SCLN // Ø -#define NO_PIPE KC_GRV // | -#define NO_PLUS KC_MINS // + -#define NO_QUOT KC_NUHS // ' -#define NO_UMLA KC_RBRC // ¨ -//Norwegian - Modifier dependant definitions -#define NO_EXLM LSFT(KC_1) // ! -#define NO_DQT LSFT(KC_2) // " -#define NO_AT RALT(KC_2) // @ -#define NO_HASH LSFT(KC_3) // # -#define NO_EUR LSFT(KC_4) // € -#define NO_DLR RALT(KC_4) // $ -#define NO_PERC LSFT(KC_5) // % -#define NO_AND LSFT(KC_6) // & -#define NO_SLSH LSFT(KC_7) // / -#define NO_PO LSFT(KC_8) // ( -#define NO_PC LSFT(KC_9) // ) -#define NO_EQL LSFT(KC_0) // = -#define NO_LCBR RALT(KC_7) // { -#define NO_LBRC RALT(KC_8) // [ -#define NO_RBRC RALT(KC_9) // ] -#define NO_RCBR RALT(KC_0) // } -#define NO_COLN LSFT(KC_DOT) // : -#define NO_SCLN LSFT(KC_COMM) // ; -#define NO_MU RALT(KC_M) // µ -#define NO_EURO RALT(KC_E) // € -#define NO_SECT LSFT(KC_GRV) // § -#define NO_GERC RALT(KC_COMM) // ¸ -#define NO_QUAR LSFT(RALT(KC_4)) // ¼ -//Norwegian layout - dependant on previous definitions -#define NO_UNDS LSFT(NO_MINS) // _ -#define NO_QUES LSFT(NO_PLUS) // ? -#define NO_ACUT RALT(NO_BSLS) // Acute -#define NO_GRAV LSFT(NO_BSLS) // ` -#define NO_GT LSFT(NO_LT) // > -#define NO_HALF RALT(NO_LT) // ½ -#define NO_HAT LSFT(NO_UMLA) // ^ -#define NO_ASTR LSFT(NO_QUOT) // * -#define NO_TILD RALT(NO_UMLA) // ~ - -//One Shot Modifier -#define OSM_LCTL OSM(MOD_LCTL) -#define OSM_LALT OSM(MOD_LALT) -#define OSM_LSFT OSM(MOD_LSFT) -#define OSM_LGUI OSM(MOD_LGUI) -#define OSM_RCTL OSM(MOD_RCTL) -#define OSM_RALT OSM(MOD_RALT) -#define OSM_RSFT OSM(MOD_RSFT) -#define OSM_RGUI OSM(MOD_RGUI) - -//CTRL on hold, ESC on tap -#define CTL_ESC CTL_T(KC_ESC) - -//Layers -#define L1 0 -#define L2 1 -#define L3 2 -#define L4 3 -#define L5 4 - -// Momentary switch to layer -#define MO_L2 MO(L2) -#define MO_L4 MO(L4) -#define MO_L5 MO(L5) -// Momentary switch to layer - One Shot Layer -#define OSL_L2 OSL(L2) -#define OSL_L3 OSL(L3) -#define OSL_L4 OSL(L4) - -//Tap Dance Declarations -enum { - SCLN_OE = 0, - QUOT_AE, - DQT_AO -}; - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for semicolon, twice for ø - [SCLN_OE] = ACTION_TAP_DANCE_DOUBLE(NO_SCLN, NO_OE), - //Tap once for single quote, twice for æ - [QUOT_AE] = ACTION_TAP_DANCE_DOUBLE(NO_QUOT, NO_AE), - //Tap once for double quote, twice for å - [DQT_AO] = ACTION_TAP_DANCE_DOUBLE(NO_DQT, NO_AO), -// Other declarations would go here, separated by commas, if you have them -}; - -//Tap Dance keys -#define TD_SCLN_OE TD(SCLN_OE) -#define TD_QUOT_AE TD(QUOT_AE) -#define TD_DQT_AO TD(DQT_AO) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [L1] = LAYOUT( - KC_LGUI, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RGUI, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, TD_DQT_AO, - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TD_SCLN_OE, TD_QUOT_AE, - OSM_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, NO_MINS, OSM_RSFT, - CTL_ESC, MO_L5, KC_TAB, OSM_LALT, MO_L4, OSL_L3, KC_SPC, KC_ENT, OSL_L3, MO_L4, OSM_LALT, NO_EQL, NO_PLUS, KC_RCTL - ), - [L2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NO_DQT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NO_SCLN, NO_QUOT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [L3] = LAYOUT( - NO_LBRC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, NO_RBRC, - NO_LCBR, XXXXXXX, XXXXXXX, NO_AT, XXXXXXX, NO_TILD, NO_QUES, NO_EXLM, NO_PIPE, XXXXXXX, XXXXXXX, NO_RCBR, - _______, NO_ASTR, NO_BSLS, NO_DLR, NO_HASH, XXXXXXX, NO_HAT, XXXXXXX, NO_COLN, NO_SLSH, NO_SCLN, NO_QUOT, - NO_PO, KC_0, NO_SECT, NO_PERC, XXXXXXX, NO_GRAV, NO_AND, NO_UMLA, NO_LT, NO_GT, NO_UNDS, NO_PC, - XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX - ), - [L4] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_HOME, KC_PGDN, KC_PGUP, KC_END, XXXXXXX, XXXXXXX, - _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, XXXXXXX, KC_DEL, - XXXXXXX, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, XXXXXXX, KC_APP, XXXXXXX, XXXXXXX, KC_VOLD, XXXXXXX, - OSM_LCTL, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, OSM_RALT, KC_MUTE, KC_VOLU, OSM_RCTL - ), - [L5] = LAYOUT( - XXXXXXX, TO(L1), TO(L2), TO(L3), TO(L4), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ) -}; - -//TODO: Is there productivity gain in the use of unicode? -// - Won't work in xterm. -// Create a layer for macros and/or unicode? -// Are macros useful? -// - Found no gain in having sendstring for commands. -// - Find repeated tasks that cannot be done easily on the OS. -// - Most other keymaps have macros for game/fun stuff, hard to find "serious" onces. -// Screw Norwegian layout, switch to US with unicode æøå or US/English International? -// - Will be different from laptop keyboard, requiring a switch on the OS side when only using the laptop. diff --git a/keyboards/atreus62/keymaps/194h/rules.mk b/keyboards/atreus62/keymaps/194h/rules.mk deleted file mode 100644 index 2c97aee0934..00000000000 --- a/keyboards/atreus62/keymaps/194h/rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -TAP_DANCE_ENABLE = yes -NKRO_ENABLE = true -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -KEY_LOCK_ENABLE = no -LEADER_ENABLE = no diff --git a/keyboards/atreus62/keymaps/atreus52/README.md b/keyboards/atreus62/keymaps/atreus52/README.md deleted file mode 100644 index 245df7deb45..00000000000 --- a/keyboards/atreus62/keymaps/atreus52/README.md +++ /dev/null @@ -1,10 +0,0 @@ - - -Atreus52 Modification -======================= - -Firmware for my custom keyboard based on the Atreus layout, but with 5 rows and only 5 columns per hand. -More documentation coming soon. - -# License - GPL-3+ diff --git a/keyboards/atreus62/keymaps/atreus52/config.h b/keyboards/atreus62/keymaps/atreus52/config.h deleted file mode 100644 index ba0eaf0dbbb..00000000000 --- a/keyboards/atreus62/keymaps/atreus52/config.h +++ /dev/null @@ -1,18 +0,0 @@ -#include "../../config.h" - -#undef MANUFACTURER -#undef PRODUCT -#undef DESCRIPTION -#undef MATRIX_ROW_PINS -#undef MATRIX_COL_PINS -#undef DIODE_DIRECTION - -/* USB Device descriptor parameter */ -#define MANUFACTURER Mesh Industries -#define PRODUCT Atreus52 Treeboard -#define DESCRIPTION q.m.k. keyboard firmware for Atreus52 - -#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } -#define MATRIX_COL_PINS { B2, B1, F7, F6, F5, F4, B6, D3, D2, D1, D0, D4, B3 } - -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/atreus62/keymaps/atreus52/keymap.c b/keyboards/atreus62/keymaps/atreus52/keymap.c deleted file mode 100644 index 72bb886534d..00000000000 --- a/keyboards/atreus62/keymaps/atreus52/keymap.c +++ /dev/null @@ -1,105 +0,0 @@ -#include QMK_KEYBOARD_H - -// Layers -#define DVORAK 0 -#define QWERTY 1 -#define RAISE 2 -#define LOWER 3 -#define BDO 4 -#define RESETL 5 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DVORAK] = LAYOUT_kc( - NO, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, NO, \ - NO, QUOT, COMM, DOT, P, Y, F, G, C, R, L, NO, \ - NO, A, O, E, U, I, D, H, T, N, S, NO, \ - NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, \ - NO, FN2, LALT, LCTL, FN1, LSFT, BSPC, ENT, SPC, FN0, LGUI, LEFT, RGHT, NO - ), - - [QWERTY] = LAYOUT_kc( - NO, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, NO, \ - NO, Q, W, E, R, T, Y, U, I, O, P, NO, \ - NO, A, S, D, F, G, H, J, K, L, SCLN, NO, \ - NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, \ - NO, FN2, LALT, LCTL, FN1, LSFT, BSPC, ENT, SPC, FN0, LGUI, LEFT, RGHT, NO - ), - - [RAISE] = LAYOUT_kc( - NO, MRWD, MPRV, MPLY, MNXT, MFFD, TRNS, MUTE, VOLD, VOLU, DEL, NO, \ - NO, TILD, GRV, LCBR, RCBR, DQUO, QUOT, EQL, PLUS, MINS, QUES, NO, \ - NO, ESC, TAB, LPRN, RPRN, BSLS, SLSH, LEFT, DOWN, UP, RGHT, NO, \ - NO, TRNS, TRNS, LBRC, RBRC, TRNS, INS, PIPE, UNDS, TRNS, TRNS, NO, \ - NO, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN3, NO - ), - - [LOWER] = LAYOUT_kc( - NO, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, NO, \ - NO, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, NO, \ - NO, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, NO, \ - NO, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, DOT, TRNS, TRNS, TRNS, NO, \ - NO, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, NO - ), - - [BDO] = LAYOUT_kc( - NO, ESC, 1, 2, 3, 4, 5, 0, SLSH, U, C, NO, \ - NO, TAB, Q, W, E, R, 6, Y, I, O, P, NO, \ - NO, LSFT, A, S, D, F, 7, G, H, J, K, NO, \ - NO, T, Z, X, C, V, 8, B, N, M, L, NO, \ - NO, LCTL, SPC, SPC, SPC, SPC, COMM, ENT, 9, NO, NO, NO, FN2, NO - ), - - [RESETL] = LAYOUT( - KC_NO, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_FN3,KC_NO - ) -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(RAISE), // Raise layer - [1] = ACTION_LAYER_MOMENTARY(LOWER), // Lower layer - [2] = ACTION_LAYER_TOGGLE(BDO), // BDO layer - [3] = ACTION_LAYER_TOGGLE(RESETL) // RESET layer -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -static uint8_t qw_dv_swap_state = 0; - -bool process_record_user (uint16_t keycode, keyrecord_t *record) { - if (keycode == KC_LGUI) { - if (record->event.pressed) { - qw_dv_swap_state |= 0b00000001; - } else { - qw_dv_swap_state &= ~(0b00000001); - } - } - if (keycode == KC_LCTL) { - if (record->event.pressed) { - qw_dv_swap_state |= 0b00000010; - } else { - qw_dv_swap_state &= ~(0b00000010); - } - } - - if (qw_dv_swap_state == 0b00000011) { - layer_invert(DVORAK); - } - return true; -} diff --git a/keyboards/atreus62/keymaps/atreus52/rules.mk b/keyboards/atreus62/keymaps/atreus52/rules.mk deleted file mode 100644 index efa309d2017..00000000000 --- a/keyboards/atreus62/keymaps/atreus52/rules.mk +++ /dev/null @@ -1,4 +0,0 @@ -NKRO_ENABLE = true -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no diff --git a/keyboards/atreus62/keymaps/default/keymap.c b/keyboards/atreus62/keymaps/default/keymap.c deleted file mode 100644 index e39f5ad1258..00000000000 --- a/keyboards/atreus62/keymaps/default/keymap.c +++ /dev/null @@ -1,63 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DEFAULT 0 -#define _NAV 1 -#define _RESET 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_DEFAULT] = LAYOUT( /* qwerty */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS , - KC_BSLS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC , - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT , - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LBRC , - KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_DELT, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI - ), - - [_NAV] = LAYOUT( - TO(_DEFAULT), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS , - TO(_RESET), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [_RESET] = LAYOUT( - TO(_DEFAULT), KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , - KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , - KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , - KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , - KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , RESET - ) - - /* - [_TRNS] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - */ -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus62/keymaps/jarred/config.h b/keyboards/atreus62/keymaps/jarred/config.h deleted file mode 100644 index 34ab0baaf0b..00000000000 --- a/keyboards/atreus62/keymaps/jarred/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 Jarred Steenvoorden - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// My hand wire diodes are in the opposite direction to the Atreus62 PCB -#undef DIODE_DIRECTION -#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/atreus62/keymaps/jarred/keymap.c b/keyboards/atreus62/keymaps/jarred/keymap.c deleted file mode 100644 index 7a49b2890c4..00000000000 --- a/keyboards/atreus62/keymaps/jarred/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2018 Jarred Steenvoorden - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H -#include "jarred.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QW] = LAYOUT_atreus62_grid_wrapper(BLANK_12, QWERTY_1_12, QWERTY_2_12, QWERTY_3_12, QWERTY_L4, KC_NO, KC_NO, QWERTY_R4), - [_LW] = LAYOUT_atreus62_grid_wrapper(BLANK_12, LOWER_1_12 , LOWER_2_12 , LOWER_3_12 , LOWER_L4 , KC_NO, KC_NO, LOWER_R4 ), - [_NV] = LAYOUT_atreus62_grid_wrapper(BLANK_12, NAV_1_12 , NAV_2_12 , NAV_3_12 , NAV_L4 , KC_NO, KC_NO, NAV_R4 ), - [_NP] = LAYOUT_atreus62_grid_wrapper(BLANK_12, NUMPAD_1_12, NUMPAD_2_12, NUMPAD_3_12, NUMPAD_L4, KC_NO, KC_NO, NUMPAD_R4), - [_MS] = LAYOUT_atreus62_grid_wrapper(BLANK_12, MOUSE_1_12 , MOUSE_2_12 , MOUSE_3_12 , MOUSE_L4 , KC_NO, KC_NO, MOUSE_R4 ) -}; diff --git a/keyboards/atreus62/keymaps/mfluid/keymap.c b/keyboards/atreus62/keymaps/mfluid/keymap.c deleted file mode 100644 index 206a4655be5..00000000000 --- a/keyboards/atreus62/keymaps/mfluid/keymap.c +++ /dev/null @@ -1,55 +0,0 @@ -#include QMK_KEYBOARD_H - -#include "action_layer.h" - -#define OOOOOOO KC_TRNS - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, - KC_LCTL, KC_LGUI, KC_LALT, MO(3), MO(1), KC_BSPC, KC_RCTL, KC_ENT, KC_SPC, MO(2), KC_DEL, KC_EQL, KC_LBRC, KC_RBRC - ), - - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PSLS, _______, - _______, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_P4, KC_P5, KC_P6, KC_PAST, _______, - _______, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_PGUP, - _______, KC_F1, KC_F2, KC_F3, KC_F4, _______, _______, KC_P0, KC_PDOT, KC_PENT, KC_PPLS, KC_PGDN, - _______, _______, _______, _______, OOOOOOO, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, - _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, - _______, _______, KC_MPLY, KC_MRWD, KC_MFFD, _______, _______, KC_BTN1, KC_BTN2, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, OOOOOOO, _______, _______, _______, _______ - ), - - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, KC_COPY, KC_PGUP, _______, _______, KC_PASTE, KC_DEL, - _______, _______, _______, KC_PGDN, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, - _______, _______, KC_CUT, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, OOOOOOO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - diff --git a/keyboards/atreus62/keymaps/mfluid/readme.md b/keyboards/atreus62/keymaps/mfluid/readme.md deleted file mode 100644 index fa341b893c6..00000000000 --- a/keyboards/atreus62/keymaps/mfluid/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Mfluid Keymap for the Atreus62 - -## Program - -`make atreus62:mfluid:avrdude` - -## Layers - -[0-default](https://i.imgur.com/dpBdPn8.png) - -[1-numpad](https://i.imgur.com/JMN8Fk9.png) - -[2-multimedia](https://i.imgur.com/ZCSzKsZ.png) - -[3-vim](https://i.imgur.com/J15xCqW.png) - diff --git a/keyboards/atreus62/keymaps/mneme/README.md b/keyboards/atreus62/keymaps/mneme/README.md deleted file mode 100644 index e65bf5de1c7..00000000000 --- a/keyboards/atreus62/keymaps/mneme/README.md +++ /dev/null @@ -1,58 +0,0 @@ - - -Mnemes Swedish Bonanza -======================= - -My Layout in process, most of the code is shamelessly stolen from [algernons][algernon] excellent layout - - [algernon]: https://github.com/algernon/ergodox-layout - -It's for Windows (current work forces me to) and Swedish (matter of birth) so ymmw. - -## Table of Contents - -* [Layouts](#layouts) - - [Base layer](#base-layer) - - [Nav layer](#nav-layer) - - [Sym layer](#sym-layer) - - [LED states](#led-states) - -# Layouts - -## Base layer - -![Base layer](http://imgur.com/zTYxnE0) - - -* The number row doubles as a function row. Short presses produces numbers, long presses produces Fxx -* The `Shift`, `Alt`, and `Control` modifiers are one-shot. -* `Backspace` and `Enter` doubles as switches to the `sym` layer when held -* The `ESC` key also doubles as a one-shot cancel key. -* The **Lead** key is followed by a sequence of keys. - - `LEAD l` : `lgui+l`. - - `LEAD s l` : `λ`. - - `LEAD s s` : `¯\_(ツ)_/¯` - - `LEAD s f` : `凸(ツ)凸` - - `LEAD u l` : Set unicode input mode to linux. - - `LEAD s w` : Set unicode input mode to windows. - - `LEAD a *` : Application switching based on position in start menu. Very specific to my computer. - - -## Nav layer - -![Nav layer](http://imgur.com/cbMWVDC) - -Basic navigation on the right hand and modifiers close -by for the left. The latter because I tend to use `ctrl+arrows` quite a lot. - -## Sym layer - -![Sym layer](http://imgur.com/n2jmqFU) - -* Easy access to most symbols I use on a daily basis. Most common are on the home row, the rest are grouped as best as I could. - -- `eq` : Tapdance, produces `===` and `!==` -- `fun`: Tapdance, produces `=>` and `() => {\n` - -# License - GPL-3+ diff --git a/keyboards/atreus62/keymaps/mneme/config.h b/keyboards/atreus62/keymaps/mneme/config.h deleted file mode 100644 index a89bf5503c8..00000000000 --- a/keyboards/atreus62/keymaps/mneme/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#define ONESHOT_TIMEOUT 3000 -#define TAPPING_TERM 200 -#define FORCE_NKRO -#define LEADER_TIMEOUT 1000 - -#include "../../config.h" diff --git a/keyboards/atreus62/keymaps/mneme/keymap.c b/keyboards/atreus62/keymaps/mneme/keymap.c deleted file mode 100644 index ba46d405ea6..00000000000 --- a/keyboards/atreus62/keymaps/mneme/keymap.c +++ /dev/null @@ -1,337 +0,0 @@ -#include -#include QMK_KEYBOARD_H -#include "led.h" -#include "action_layer.h" -#include "action_util.h" - -/* - *WINDOWS SWEDISH - */ - /* - *WINDOWS SWEDISH - */ - #define KN_HALF KC_GRV // 1/2 - #define KN_PLUS KC_MINS // + - #define KN_ACUT KC_EQL // ´ - #define KN_AO KC_LBRC // Å - #define KN_UMLA KC_RBRC // ¨ - #define KN_OE KC_SCLN // Ö - #define KN_AE KC_QUOT // Ä - #define KN_QUOT KC_NUHS // ' - #define KN_LABK KC_NUBS // < - #define KN_MINS KC_SLSH // - - #define KN_EXLM LSFT(KC_1) // ! - #define KN_DQT LSFT(KC_2) // " - #define KN_AT RALT(KC_2) // @ - #define KN_HASH LSFT(KC_3) // # - #define KN_EUR LSFT(KC_4) // € - #define KN_DLR RALT(KC_4) // $ - #define KN_PERC LSFT(KC_5) // % - #define KN_AMPR LSFT(KC_6) // & - #define KN_SLSH LSFT(KC_7) // / - #define KN_LPRN LSFT(KC_8) // ( - #define KN_RPRN LSFT(KC_9) // ) - #define KN_EQL LSFT(KC_0) // = - #define KN_UNDS LSFT(KN_MINS) // _ - #define KN_QUES LSFT(KN_PLUS) // ? - #define KN_GRAV LSFT(KN_ACUT) // ` - #define KN_LCBR RALT(KC_7) // { - #define KN_RCBR RALT(KC_0) // } - #define KN_LBRC RALT(KC_8) // [ - #define KN_RBRC RALT(KC_9) // ] - #define KN_RABK LSFT(KN_LABK) // < - #define KN_COLN LSFT(KC_DOT) // : - #define KN_SCLN LSFT(KC_COMM) // : - #define KN_PIPE RALT(KN_LABK) // | - #define KN_QUES LSFT(KN_PLUS) // ? - #define KN_CIRC LSFT(KN_UMLA) // ^ - #define KN_ASTR LSFT(KN_QUOT) // * - #define KN_TILD RALT(KN_UMLA) // ~ - #define KN_BSLS RALT(KN_PLUS) // - -#define OSM_LCTL OSM(MOD_LCTL) -#define OSM_LALT OSM(MOD_LALT) -#define OSM_LSFT OSM(MOD_LSFT) - -#define KC_HYP LSFT(LALT(LCTL(KC_LGUI))) - -#define KC_COPY LCTL(KC_C) -#define KC_PASTE LCTL(KC_V) -#define KC_UNDO LCTL(KC_Z) -#define KC_REDO LCTL(LSFT(KC_Z)) - -// Layers -enum { - BASE = 0, - NAV, - SYM -}; - -//Macros -enum { - KF_1 = 0, // 1, F1 - KF_2, // ... - KF_3, - KF_4, - KF_5, - KF_6, - KF_7, - KF_8, - KF_9, - KF_10, - KF_11, - KF_12 -}; - -// Tapdance -enum { - TD_FUN = 0, - TD_EQ -}; - -//State and timers -uint16_t kf_timers[12]; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [BASE] = LAYOUT( - M(KF_11), M(KF_1), M(KF_2), M(KF_3), M(KF_4), M(KF_5), M(KF_6), M(KF_7), M(KF_8), M(KF_9), M(KF_10), M(KF_12), - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KN_AO, - OSM_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KN_OE, KN_AE, - OSM_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KN_MINS, OSM_LSFT, - MO(NAV), OSM_LCTL, OSM_LALT, KC_LGUI, MO(SYM), KC_BSPC, KC_DELT, KC_ENT, KC_SPC, MO(SYM), KC_LEAD, KC_LALT, KC_LCTRL, KC_HYP - ), - - [NAV] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_L, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU - ), - - [SYM] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TD(TD_EQ), TD(TD_FUN), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KN_LABK, KN_RABK, KN_LCBR, KN_RCBR, KN_PLUS, KN_AT, KN_DQT, KN_QUOT, KN_GRAV, KN_SLSH, KC_TRNS, - KC_TRNS, KN_EXLM, KN_EQL, KN_LPRN, KN_RPRN, KN_MINS, KN_UNDS, KN_CIRC, KN_DLR, KN_AMPR, KN_PIPE, KC_TRNS, - KC_TRNS, KN_EUR, KN_PERC, KN_LBRC, KN_RBRC, KN_ASTR, KN_HASH, KN_SCLN, KN_COLN, KN_QUES, KN_BSLS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) -}; - -#define TAP_ONCE(code) \ - register_code (code); \ - unregister_code (code) - -static void m_tapn (uint8_t code, ...) { - uint8_t kc = code; - va_list ap; - - va_start(ap, code); - do { - register_code(kc); - unregister_code(kc); - wait_ms(50); - kc = va_arg(ap, int); - } while (kc != 0); - va_end(ap); -} - -static void m_handle_kf (keyrecord_t *record, uint8_t id) { - uint8_t code = id - KF_1; - - if (record->event.pressed) { - kf_timers[code] = timer_read (); - } else { - uint8_t kc_base; - uint8_t long_press = (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM); - - kf_timers[code] = 0; - - switch(id){ - case KF_1 ... KF_10: - if (long_press) { - // Long press - kc_base = KC_F1; - } else { - kc_base = KC_1; - } - code += kc_base; - break; - case KF_11: - code = long_press ? KC_F11 : KC_ESC; - break; - case KF_12: - code = long_press ? KC_F12 : KN_PLUS; - break; - } - register_code (code); - unregister_code (code); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch (id) { - case KF_1 ... KF_12: - m_handle_kf(record, id); - break; - } - return MACRO_NONE; -}; - -// Custom keycodes -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - bool queue = true; - - //Cancle one-shot mods. - switch (keycode) { - case KC_ESC: - if (record->event.pressed && get_oneshot_mods() && !has_oneshot_mods_timed_out()) { - clear_oneshot_mods(); - queue = false; - } - break; - } - return queue; -} - -// TAP DANCE SETTINGS -void dance_eq (qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 1: // === - register_code(KC_LSHIFT); - m_tapn(KC_0, KC_0, KC_0, 0); - unregister_code(KC_LSHIFT); - break; - case 2: - register_code(KC_LSHIFT); - m_tapn(KC_1, KC_0, KC_0, 0); - unregister_code(KC_LSHIFT); - break; - default: - reset_tap_dance(state); - } -} - -void dance_fun (qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 1: // => - register_code(KC_LSHIFT); - m_tapn(KC_0, KN_LABK, 0); - unregister_code(KC_LSHIFT); - break; - case 2: // () => {} - register_code(KC_LSHIFT); - m_tapn(KC_8, KC_9, KC_SPC, KC_0, KN_LABK, KC_SPC, 0); - unregister_code(KC_LSHIFT); - register_code(KC_RALT); - m_tapn(KC_7, 0); - unregister_code(KC_RALT); - TAP_ONCE(KC_ENT); - break; - default: - reset_tap_dance(state); - } -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_FUN] = ACTION_TAP_DANCE_FN (dance_fun), - [TD_EQ] = ACTION_TAP_DANCE_FN (dance_eq) -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - set_unicode_input_mode(UC_WINC); -}; - -LEADER_EXTERNS(); -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - LEADER_DICTIONARY() { - leading = false; - leader_end(); - SEQ_ONE_KEY(KC_L){ - register_code(KC_RGUI); - TAP_ONCE(KC_L); - unregister_code(KC_RGUI); - }; - - - SEQ_TWO_KEYS (KC_A, KC_W) { - //Web - chrome - register_code (KC_LGUI); TAP_ONCE (KC_1); unregister_code (KC_LGUI); - } - SEQ_TWO_KEYS (KC_A, KC_P) { - //sPotify - register_code (KC_LGUI); TAP_ONCE (KC_2); unregister_code (KC_LGUI); - - } - SEQ_TWO_KEYS (KC_A, KC_T) { - //Total Commander - register_code (KC_LGUI); TAP_ONCE (KC_3); unregister_code (KC_LGUI); - - } - SEQ_TWO_KEYS (KC_A, KC_A) { - //Atom - register_code (KC_LGUI); TAP_ONCE (KC_4); unregister_code (KC_LGUI); - - } - SEQ_TWO_KEYS (KC_A, KC_E) { - //Emacs - register_code (KC_LGUI); TAP_ONCE (KC_5); unregister_code (KC_LGUI); - - } - SEQ_TWO_KEYS (KC_A, KC_C) { - //Cmdr - register_code (KC_LGUI); TAP_ONCE (KC_6); unregister_code (KC_LGUI); - - } - SEQ_TWO_KEYS (KC_A, KC_S) { - //Slack - register_code (KC_LGUI); TAP_ONCE (KC_7); unregister_code (KC_LGUI); - } - - SEQ_TWO_KEYS (KC_U, KC_L) { - set_unicode_input_mode(UC_LNX); - } - - - SEQ_TWO_KEYS (KC_U, KC_W) { - set_unicode_input_mode(UC_WINC); - } - - - SEQ_TWO_KEYS (KC_S, KC_S) { - // ¯\_(ツ)_/¯ - unicode_input_start(); register_hex(0xaf); unicode_input_finish(); - register_code (KC_LALT); - register_code (KC_LCTL); - TAP_ONCE (KN_PLUS); - unregister_code (KC_LCTL); - unregister_code (KC_LALT); - - register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT); - unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); - register_code (KC_RSFT); TAP_ONCE (KC_9); TAP_ONCE(KC_7); unregister_code (KC_RSFT); - unicode_input_start (); register_hex(0xaf); unicode_input_finish(); - } - - SEQ_TWO_KEYS (KC_S, KC_F) { - // 凸(ツ)凸 - unicode_input_start(); register_hex(0x51F8); unicode_input_finish(); - register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT); - unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); - register_code (KC_RSFT); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - unicode_input_start (); register_hex(0x51F8); unicode_input_finish(); - } - - SEQ_TWO_KEYS (KC_S, KC_L) { - // λ - unicode_input_start(); - register_hex(0x03bb); - unicode_input_finish(); - } - }; -}; diff --git a/keyboards/atreus62/keymaps/mneme/rules.mk b/keyboards/atreus62/keymaps/mneme/rules.mk deleted file mode 100644 index 160ce6edbf7..00000000000 --- a/keyboards/atreus62/keymaps/mneme/rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -TAP_DANCE_ENABLE = yes -NKRO_ENABLE = true -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -LEADER_ENABLE = yes diff --git a/keyboards/atreus62/keymaps/mneme/unicode b/keyboards/atreus62/keymaps/mneme/unicode deleted file mode 100644 index b3f62b6d319..00000000000 --- a/keyboards/atreus62/keymaps/mneme/unicode +++ /dev/null @@ -1,114 +0,0 @@ -Todo -☐ 2610 Todo -☑ 2611 Done -☒ 2612 Failed - -Operator -× 00D7 Multiplication -÷ 00F7 Division -≤ 2264 LessEqual -≥ 2265 MoreEqual -± 00B1 Plusminus - -Math -∏ 220F Product -∑ 2211 Sum -≈ 2248 Almost -≡ 2261 Equivalent -∞ 221E Infinity -‰ 2030 Mille - -Set -⊂ 2282 Subset -⊃ 2283 sUperset -∩ 2229 Intersextion -∪ 222A Union -∈ 2208 Element -∉ 2209 Notelement -∍ 220D Contains -∌ 220C doesNotcontain - -Logic -¬ 00AC Not -∧ 2227 And -∨ 2228 Or -∃ 2203 Exists -∄ 2204 Notexists - -Greek -µ 00B5 Micro -λ 03BB Lamda -Ω 2126 Omega -α 03B1 Alpha -β 03B2 Beta -γ 03B3 Gamma -π 03C0 Pi -δ 03B4 Delta - -Other -☁ 2601 Cloud -☼ 263C Sun -☂ 2602 Rain -☠ 2620 Skull -♺ 267A Recycle -👍1F44D thumbsUp -👎1F44E thumbsDown -💩 1F4A9 Poo - - -//Todo -SEQ_THREE_KEYS(KC_U, KC_G, KC_T){m_unicode(0x2610);}; // Todo -SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x2611);}; // Done -SEQ_THREE_KEYS(KC_U, KC_G, KC_F){m_unicode(0x2612);}; // Failed - -//Operator -SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x00D7);}; // Multiplication -SEQ_THREE_KEYS(KC_U, KC_O, KC_D){m_unicode(0x00F7);}; // Division -SEQ_THREE_KEYS(KC_U, KC_O, KC_L){m_unicode(0x2264);}; // LessEqual -SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x2265);}; // MoreEqual -SEQ_THREE_KEYS(KC_U, KC_O, KC_P){m_unicode(0x00B1);}; // Plusminus - -//Math -SEQ_THREE_KEYS(KC_U, KC_M, KC_P){m_unicode(0x220F);}; // Product -SEQ_THREE_KEYS(KC_U, KC_M, KC_S){m_unicode(0x2211);}; // Sum -SEQ_THREE_KEYS(KC_U, KC_M, KC_A){m_unicode(0x2248);}; // Almost -SEQ_THREE_KEYS(KC_U, KC_M, KC_E){m_unicode(0x2261);}; // Equivalent -SEQ_THREE_KEYS(KC_U, KC_M, KC_I){m_unicode(0x221E);}; // Infinity -SEQ_THREE_KEYS(KC_U, KC_M, KC_M){m_unicode(0x2030);}; // Mille - -//Set -SEQ_THREE_KEYS(KC_U, KC_S, KC_S){m_unicode(0x2282);}; Subset -SEQ_THREE_KEYS(KC_U, KC_S, KC_P){m_unicode(0x2283);}; suPerset -SEQ_THREE_KEYS(KC_U, KC_S, KC_I){m_unicode(0x2229);}; Intersection -SEQ_THREE_KEYS(KC_U, KC_S, KC_U){m_unicode(0x222A);}; Union -SEQ_THREE_KEYS(KC_U, KC_S, KC_E){m_unicode(0x2208);}; Element -SEQ_THREE_KEYS(KC_U, KC_S, KC_N){m_unicode(0x2209);}; Notelement -SEQ_THREE_KEYS(KC_U, KC_S, KC_C){m_unicode(0x220D);}; Contains -SEQ_THREE_KEYS(KC_U, KC_S, KC_D){m_unicode(0x220C);}; doesNotcontain - -//Logic -SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x00AC);}; // Not -SEQ_THREE_KEYS(KC_U, KC_L, KC_A){m_unicode(0x2227);}; // And -SEQ_THREE_KEYS(KC_U, KC_L, KC_O){m_unicode(0x2228);}; // Or -SEQ_THREE_KEYS(KC_U, KC_L, KC_E){m_unicode(0x2203);}; // Exists -SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x2204);}; // Notexists - -//Greek -SEQ_THREE_KEYS(KC_U, KC_G, KC_M){m_unicode(0x00B5);}; // Micro -SEQ_THREE_KEYS(KC_U, KC_G, KC_L){m_unicode(0x03BB);}; // Lamda -SEQ_THREE_KEYS(KC_U, KC_G, KC_O){m_unicode(0x2126);}; // Omega -SEQ_THREE_KEYS(KC_U, KC_G, KC_A){m_unicode(0x03B1);}; // Alpha -SEQ_THREE_KEYS(KC_U, KC_G, KC_B){m_unicode(0x03B2);}; // Beta -SEQ_THREE_KEYS(KC_U, KC_G, KC_G){m_unicode(0x03B3);}; // Gamma -SEQ_THREE_KEYS(KC_U, KC_G, KC_P){m_unicode(0x03C0);}; // Pi -SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x03B4);}; // Delta - -//Zother -SEQ_THREE_KEYS(KC_U, KC_Z, KC_C){m_unicode(0x2601);}; // Cloud -SEQ_THREE_KEYS(KC_U, KC_Z, KC_S){m_unicode(0x263C);}; // Sun -SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x2602);}; // Rain -SEQ_THREE_KEYS(KC_U, KC_Z, KC_K){m_unicode(0x2620);}; // sKull -SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x267A);}; // rEcycle -SEQ_THREE_KEYS(KC_U, KC_Z, KC_U){m_unicode(0x1F44D);}; // thumbsUp -SEQ_THREE_KEYS(KC_U, KC_Z, KC_D){m_unicode(0x1F44E);}; // thumbsDown -SEQ_THREE_KEYS(KC_U, KC_Z, KC_P){m_unicode(0x1F4A9);}; // Poo diff --git a/keyboards/atreus62/keymaps/pcewing/keymap.c b/keyboards/atreus62/keymaps/pcewing/keymap.c deleted file mode 100644 index eee22271f48..00000000000 --- a/keyboards/atreus62/keymaps/pcewing/keymap.c +++ /dev/null @@ -1,92 +0,0 @@ -#include QMK_KEYBOARD_H - -#define FN MO(_FN) -#define TODO KC_NO - -enum atreus62_layers { - _DEFAULT, - _FN, - _RESET -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Default layer - * ,-----------------------------------------. ,-----------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Esc | A | S | D | F | G |,------.,------.| H | J | K | L | ; | " | - * |------+------+------+------+------+------|| || ||------+------+------+------+------+------| - * |Shift | Z | X | C | V | B ||Delete||Enter || N | M | , | . | / |Shift | - * |------+------+------+------+------+------|| || ||------+------+------+------+------+------| - * | Ctrl | Win | Alt | ` | Fn | Bksp |`------'`------'|Space | Fn | | Alt | Win | Ctrl | - * `-----------------------------------------' `-----------------------------------------' - */ - [_DEFAULT] = LAYOUT( /* qwerty */ - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, FN, KC_BSPC, KC_DEL, KC_ENT, KC_SPC, FN, TODO, KC_RALT, KC_RGUI, KC_RCTL - ), - - /* Function layer - * ,-----------------------------------------. ,-----------------------------------------. - * | | | | | | | | | F10 | F11 | F12 | | | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | Home | Up | End | PgUp | | | PrSc | F7 | F8 | F9 | | | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Caps | Left | Down |Right | PgDn | |,------.,------.|Pause | F4 | F5 | F6 | | | - * |------+------+------+------+------+------|| || ||------+------+------+------+------+------| - * | | { | } | [ | ] | || || ||Insert| F1 | F2 | F3 | | | - * |------+------+------+------+------+------|| || ||------+------+------+------+------+------| - * | | | | | | |`------'`------'| | | | | | | - * `-----------------------------------------' `-----------------------------------------' - */ - [_FN] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, KC_F10, KC_F11, KC_F12, _______, TO(_RESET), - _______, KC_HOME, KC_UP, KC_END, KC_PGDN, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, _______, _______, - _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGUP, _______, KC_PAUS, KC_F4, KC_F5, KC_F6, _______, _______, - _______, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, _______, KC_INS, KC_F1, KC_F2, KC_F3, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* - * This layer makes it possible to reset the firmware; don't get rid of it and make sure there is a way to activate it. - */ - [_RESET] = LAYOUT( - TO(_DEFAULT), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET - ) - - /* - [_TRNS] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - */ -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus62/keymaps/xyverz/keymap.c b/keyboards/atreus62/keymaps/xyverz/keymap.c deleted file mode 100644 index a7c33ce9eab..00000000000 --- a/keyboards/atreus62/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,189 +0,0 @@ -/* This is the Atreus62 keyboard layout by Xyverz aka u/Zrevyx on r/mk - I've blatantly stolen what works for me from the Planck and Preonic - layouts and modified this file to fit me. Initial credet goes to - u/profet23 for the doing all the work and adding this keyboard to - QMK in the first place. - - I've got Dvorak, Qwerty, and Colemak layouts at this time, with the - possibility of adding more in the future. - - The bottom row is fairly Kinesis-ish since the Contour and Advantage - keyboards have been my daily drivers for the last 17 years. I hope - You can get some enjoyment out of this layout should you chose it! - -CHANGELOG: - - 0.1 - Initial commit. Based off of Profet's default keymap. - 0.2 - Converted to a more Planck/Preonic keymap style file with - persistent layers enabled. Renamed layers to reflect OLKB maps. - Added a TODO list. - 0.3 - Moved location of media & volume keys. Added Print Screen, - Scroll Lock and Pause keys. Added a WOW gaming layer that - changes the location of Ctrl & Alt to the thumb keys. Added - readme. - 0.4 - After more useage, I realized that the ESC key was in the way - of my muscle memory (gee, thanks, Planck!) so I moved it to - the normal Caps Lock position, and moved Caps Lock to the same - position on the RAISE and LOWER layers. Added code to turn off - the Pro Micro LEDs after flashing. - 0.5 - Converted keymap to LAYOUT standard. - -TODO: - - * Make the layout more efficient, even if it means changing the RAISE - and LOWER functionality. - * Add legends in comments for each layer. Maybe. - -*/ - -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _DVORAK 0 -#define _QWERTY 1 -#define _COLEMAK 2 -#define _WOW 3 -#define _LOWER 4 -#define _RAISE 5 -#define _ADJUST 16 - -enum atreus52_keycodes { - DVORAK = SAFE_RANGE, - QWERTY, - COLEMAK, - WOW, - LOWER, - RAISE -}; - -// Aliases to make the keymap clearer. -#define CTL_ENT CTL_T(KC_ENT) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_DVORAK] = LAYOUT ( /* dvorak */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL - ), - - [_QWERTY] = LAYOUT ( /* qwerty */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL - ), - - [_COLEMAK] = LAYOUT ( /* colemak */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL - ), - - [_WOW] = LAYOUT ( /* Dvorak with minor modifications for playing World of Warcraft */ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LALT, CTL_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT - ), - - [_LOWER] = LAYOUT ( - KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, - KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE, - KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______, - _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, - _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ - ), - [_RAISE] = LAYOUT ( - KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, - KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, - KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, KC_EQL, KC_LBRC, KC_RBRC, _______, - _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, - _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ - ), - [_ADJUST] = LAYOUT ( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, WOW, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -}; - -void matrix_init_user(void) { -#ifdef BOOTLOADER_CATERINA - // This will disable the red LEDs on the ProMicros - DDRD &= ~(1<<5); - PORTD &= ~(1<<5); - DDRB &= ~(1<<0); - PORTB &= ~(1<<0); -#endif -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case WOW: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_WOW); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; -}; diff --git a/keyboards/atreus62/keymaps/xyverz/readme.md b/keyboards/atreus62/keymaps/xyverz/readme.md deleted file mode 100644 index cf00b65e3a7..00000000000 --- a/keyboards/atreus62/keymaps/xyverz/readme.md +++ /dev/null @@ -1,131 +0,0 @@ -# Xyverz's Atreus62 Keymap - -## About this keymap: - -This is the Atreus62 keyboard layout by Xyverz aka u/Zrevyx on r/mk. I've blatantly stolen what works for me from the Planck and Preonic layouts and modified this file to fit me. Initial credet goes to u/profet23 for the doing all the work and adding this keyboard to QMK in the first place. - -I've got Dvorak, Qwerty, and Colemak layouts at this time, with the possibility of adding more in the future. - -The bottom row is fairly Kinesis-ish since the Contour and Advantage keyboards have been my daily drivers for the last 17 years. I hope You can get some enjoyment out of this layout should you chose it! - -### CHANGELOG: - -#### 0.1 - * Initial commit. Based off of Profet's default keymap. -#### 0.2 - * Converted to a more Planck/Preonic keymap style file with persistent layers enabled. Renamed layers to reflect OLKB maps. - * Added a TODO list. -#### 0.3 - * Moved location of media & volume keys. Added Print Screen, Scroll Lock and Pause keys. - * Added a WOW gaming layer that changes the location of Ctrl & Alt to the thumb keys. Right thumb is Ctrl when held, Enter when tapped. - * Added readme. -#### 0.4 - * Moved location of Escape key to Caps Lock position. Moved Caps Lock to same position on Raise/Lower Layers. - * Put Tilde/Grave in the upper-left corner - * Added code to turn off the red LEDs on the Pro Micro after flashing. They were annoying me. - -### TODO: - - * Make the layout more efficient, even if it means changing the RAISE - and LOWER functionality. - * Add legends in comments for each layer. Maybe. - * Enjoy this revision; figure out new things later. - -### Layer 0: Dvorak layer - - ,-----------------------------------------. ,-----------------------------------------. - | Grv | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | \ | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Tab | ' | , | . | P | Y | | F | G | C | R | L | / | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Esc | A | O | E | U | I | | D | H | T | N | S | - | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | Shft | ; | Q | J | K | X | Gui ||Enter | B | M | W | V | Z | Shft | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | Ctrl | Alt | Left | Rght | LOWER| BkSp |------'`------| Spc | RAISE| Up | Down | Gui | Ctrl | - `-----------------------------------------' `-----------------------------------------' - -### Layer 1: QWERTY layer - - ,-----------------------------------------. ,-----------------------------------------. - | Grv | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Tab | Q | W | E | R | T | | Y | U | I | O | P | Del | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Esc | A | S | D | F | G | | D | H | T | N | S | ' | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | Shft | Z | X | C | V | B | Gui ||Enter | N | M | , | . | / | Shft | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | Ctrl | Alt | Left | Rght | LOWER| BkSp |------'`------| Spc | RAISE| Up | Down | Gui | Ctrl | - `-----------------------------------------' `-----------------------------------------' - -### Keymap 2: Colemak layer - - ,-----------------------------------------. ,-----------------------------------------. - | Grv | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Tab | Q | W | F | P | G | | J | U | U | Y | ; | Del | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Esc | A | R | S | T | D | | H | N | E | I | O | ' | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | Shft | Z | X | C | V | B | Gui ||Enter | K | M | , | . | / | Shft | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | Ctrl | Alt | Left | Rght | LOWER| BkSp |------'`------| Spc | RAISE| Up | Down | Gui | Ctrl | - `-----------------------------------------' `-----------------------------------------' - -### Keymap 3: WoW gaming layer - - ,-----------------------------------------. ,-----------------------------------------. - | Esc | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | \ | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Tab | ' | , | . | P | Y | | F | G | C | R | L | / | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Caps | A | O | E | U | I | | D | H | T | N | S | - | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | Shft | ; | Q | J | K | X | Alt ||Ctrl/ | B | M | W | V | Z | Shft | - |------+------+------+------+------+------| ||Enter |------+------+------+------+------+------| - | Ctrl | Alt | Left | Rght | LOWER| BkSp |------'`------| Spc | RAISE| Up | Down | Gui | Ctrl | - `-----------------------------------------' `-----------------------------------------' - -### Keymap 4: LOWER layer - - ,-----------------------------------------. ,-----------------------------------------. - | F11 | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F12 | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | ~ | ` | | | | | | | | | | | | | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Caps | | Mute | Vol- | Vol+ | | | | | + | { | } | | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | | | Prev | Play | Next | | || | | | PScr | ScLk | Pause| | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | | | Home | End | | Del |------'`------| Ins | | PgUp | PgDn | | | - `-----------------------------------------' `-----------------------------------------' - - -### Keymap 5: RAISE layer - - ,-----------------------------------------. ,-----------------------------------------. - | F11 | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F12 | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | ~ | ` | | | | | | | | | | | \ | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | Caps | | Mute | Vol- | Vol+ | | | | | = | [ | ] | | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | | | Prev | Play | Next | | || | | | PScr | ScLk | Pause| | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | | | Home | End | | Del |------'`------| Ins | | PgUp | PgDn | | | - `-----------------------------------------' `-----------------------------------------' - -### Keymap 6: ADJUST layer - - ,-----------------------------------------. ,-----------------------------------------. - | | | | | | | | | | | | | | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | |RESET | | | | | | | | | | | | - |------+------+------+------+------+------| |------+------+------+------+------+------| - | | | | | | | | |Qwerty|Colemk|Dvorak| | WoW | - |------+------+------+------+------+------|------.,------|------+------+------+------+------+------| - | | | | | | | || | | | | | | | - |------+------+------+------+------+------| || |------+------+------+------+------+------| - | | | | | | |------'`------| | | | | | | - `-----------------------------------------' `-----------------------------------------' diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md deleted file mode 100644 index bb2a24e87e3..00000000000 --- a/keyboards/atreus62/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -Atreus -=== - -A 62 key variant of the Atreus keyboard. - -https://github.com/profet23/atreus62 - -Keyboard Maintainer: QMK Community -Hardware Supported: Atreus62 PCB -Hardware Availability: http://shop.profetkeyboards.com/product/atreus62-keyboard - -Make example for this keyboard (after setting up your build environment): - - make atreus62:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk deleted file mode 100644 index 66f6660c6ea..00000000000 --- a/keyboards/atreus62/rules.mk +++ /dev/null @@ -1,63 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -#BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -#MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = yes # Unicode -#BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/baguette/baguette.c b/keyboards/baguette/baguette.c deleted file mode 100644 index 751a3172562..00000000000 --- a/keyboards/baguette/baguette.c +++ /dev/null @@ -1,71 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "baguette.h" - -void bootmagic_lite(void) -{ - // The lite version of TMK's bootmagic made by Wilba. - // 100% less potential for accidentally making the - // keyboard do stupid things. - - // We need multiple scans because debouncing can't be turned off. - matrix_scan(); - wait_ms(DEBOUNCE); - matrix_scan(); - - // If the Esc and space bar are held down on power up, - // reset the EEPROM valid state and jump to bootloader. - // Assumes Esc is at [0,0] and spacebar is at [4,7]. - // This isn't very generalized, but we need something that doesn't - // rely on user's keymaps in firmware or EEPROM. - if ( ( matrix_get_row(0) & (1<<0) ) && - ( matrix_get_row(4) & (1<<7) ) ) - { - // Set the TMK/QMK EEPROM state as invalid. - eeconfig_disable(); - //eeprom_set_valid(false); - // Jump to bootloader. - bootloader_jump(); - } -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - bootmagic_lite(); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/baguette/baguette.h b/keyboards/baguette/baguette.h deleted file mode 100644 index e3945bea7ee..00000000000 --- a/keyboards/baguette/baguette.h +++ /dev/null @@ -1,59 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef BAGUETTE_H -#define BAGUETTE_H - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K42, K43, K47, K4B, K4C, K4D, K4E, K4F \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO }, \ - { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, K4C, K4D, K4E, K4F } \ -} - -#define LAYOUT_iso( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1F, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K42, K43, K47, K4B, K4C, K4D, K4E, K4F \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, KC_NO, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2D, KC_NO, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO }, \ - { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, K4C, K4D, K4E, K4F } \ -} - -#endif diff --git a/keyboards/baguette/config.h b/keyboards/baguette/config.h deleted file mode 100644 index 9aa525cfd5c..00000000000 --- a/keyboards/baguette/config.h +++ /dev/null @@ -1,218 +0,0 @@ -/* -Copyright 2018 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x5050 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Yiancar -#define PRODUCT Baguette -#define DESCRIPTION A French Custom - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B3, B2, B1, E6, D6 } -#define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, B0, D0, D1, D2, D3, D5, D4 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/baguette/info.json b/keyboards/baguette/info.json deleted file mode 100644 index 2e845cdda59..00000000000 --- a/keyboards/baguette/info.json +++ /dev/null @@ -1,153 +0,0 @@ -{ - "keyboard_name": "Baguette", - "url": "", - "maintainer": "qmk", - "bootloader": "atmel-dfu", - "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT_ansi": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0}, - {"label":"Backspace2", "x":14, "y":0}, - {"label":"Insert", "x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"\\", "x":13.5, "y":1, "w":1.5}, - {"label":"Delete", "x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":3}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"JP RO", "x":12.25, "y":3}, - {"label":"Shift", "x":13.25, "y":3, "w":1.25}, - {"label":"Up", "x":14.5, "y":3}, - {"label":"GUI", "x":1.25, "y":4}, - {"label":"Alt", "x":2.25, "y":4, "w":1.25}, - {"label":"Space", "x":3.5, "y":4, "w":6.25}, - {"label":"Ctrl", "x":9.75, "y":4, "w":1.25}, - {"label":"Fn", "x":11, "y":4}, - {"label":"Left", "x":13.5, "y":4}, - {"label":"Down", "x":14.5, "y":4}, - {"label":"Right", "x":15.5, "y":4} - ] - }, - - "LAYOUT_iso": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0}, - {"label":"Backspace2", "x":14, "y":0}, - {"label":"Insert", "x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"Delete", "x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"ISO #", "x":12.75, "y":2}, - {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"Shift", "x":0, "y":3, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":3}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"JP_RO", "x":12.25, "y":3}, - {"label":"Shift", "x":13.25, "y":3, "w":1.25}, - {"label":"Up", "x":14.5, "y":3}, - {"label":"GUI", "x":1.25, "y":4}, - {"label":"Alt", "x":2.25, "y":4, "w":1.25}, - {"label":"Space", "x":3.5, "y":4, "w":6.25}, - {"label":"Ctrl", "x":9.75, "y":4, "w":1.25}, - {"label":"Fn", "x":11, "y":4}, - {"label":"Left", "x":13.5, "y":4}, - {"label":"Down", "x":14.5, "y":4}, - {"label":"Right", "x":15.5, "y":4} - ] - } - } -} diff --git a/keyboards/baguette/keymaps/default/keymap.c b/keyboards/baguette/keymaps/default/keymap.c deleted file mode 100644 index 4dfcb837a55..00000000000 --- a/keyboards/baguette/keymaps/default/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_ansi( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TRNS, KC_INS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_TRNS, KC_RSFT, KC_UP, \ - KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - -[1] = LAYOUT_ansi( /* FN */ - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, BL_TOGG, BL_STEP, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_RCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/baguette/keymaps/default/readme.md b/keyboards/baguette/keymaps/default/readme.md deleted file mode 100644 index 1e74a02cd6a..00000000000 --- a/keyboards/baguette/keymaps/default/readme.md +++ /dev/null @@ -1,9 +0,0 @@ -# The default ANSI keymap for baguette - -Typical ANSI keymap. Please note: -- Left key from split backspace is connected to 2u key. -- Left key from split left Shift is connected to 2u key. -- Right key from split right Shift is connected to 2u key. -- Backlight control is on the Z, X and C keys of the FN layer. -- Reset key combination is FN + ]. -- Holding ESC and Space while plugging in the USB erases the EEPROM. diff --git a/keyboards/baguette/keymaps/iso/keymap.c b/keyboards/baguette/keymaps/iso/keymap.c deleted file mode 100644 index ea8baf08ee5..00000000000 --- a/keyboards/baguette/keymaps/iso/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_iso( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TRNS, KC_INS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_TRNS, KC_RSFT, KC_UP, \ - KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - -[0] = LAYOUT_iso( /* FN */ - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, BL_TOGG, BL_STEP, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_RCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/baguette/keymaps/iso/readme.md b/keyboards/baguette/keymaps/iso/readme.md deleted file mode 100644 index 9256820a5c5..00000000000 --- a/keyboards/baguette/keymaps/iso/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# The default ISO keymap for baguette - -Typical ISO keymap. Please note: -- Left key from split backspace is connected to 2u key. -- Left key from split left Shift is connected to 2u key. -- Right key from split right Shift is connected to 2u key. -- Backlight control is on the Z, X and C keys of the FN layer. -- Reset key combination is FN + ]. -- Holding ESC and Space while plugging in the USB erases the EEPROM. - diff --git a/keyboards/baguette/readme.md b/keyboards/baguette/readme.md deleted file mode 100644 index e6188cc9904..00000000000 --- a/keyboards/baguette/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -Baguette -======== - -![Baguette](https://cdn.discordapp.com/attachments/426880953143525384/479788409263489035/scecre2.png) - -This is a custom keyboard with backlight inspired by France. - -Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar) -Hardware Supported: ATMEGA 32u4 MCU with backlight support. -Hardware Availability: Closed group-buy please contact the runners (Tesletron and Enjoy) - -Make example for this keyboard (after setting up your build environment): - - make baguette:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk deleted file mode 100644 index 062ff1b22c6..00000000000 --- a/keyboards/baguette/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/bantam44/bantam44.c b/keyboards/bantam44/bantam44.c deleted file mode 100644 index f995308ae7d..00000000000 --- a/keyboards/bantam44/bantam44.c +++ /dev/null @@ -1 +0,0 @@ -#include "bantam44.h" \ No newline at end of file diff --git a/keyboards/bantam44/bantam44.h b/keyboards/bantam44/bantam44.h deleted file mode 100644 index 38afbbdde70..00000000000 --- a/keyboards/bantam44/bantam44.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef BANTAM44_H -#define BANTAM44_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38 \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, K2A }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ - { K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37, K38 } \ -} - -#endif diff --git a/keyboards/bantam44/config.h b/keyboards/bantam44/config.h deleted file mode 100644 index 5b1885d83c2..00000000000 --- a/keyboards/bantam44/config.h +++ /dev/null @@ -1,77 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bantam Keyboards -#define PRODUCT Bantam44 -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -// Planck PCB default pin-out -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#define MATRIX_ROW_PINS { F0, D6, D4, D5 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/bantam44/info.json b/keyboards/bantam44/info.json deleted file mode 100644 index 485d624f550..00000000000 --- a/keyboards/bantam44/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Bantam-44", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT": { - "key_count": 44, - "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":3, "y":0}, {"label":"K04", "x":4, "y":0}, {"label":"K05", "x":5, "y":0}, {"label":"K06", "x":6, "y":0}, {"label":"K07", "x":7, "y":0}, {"label":"K08", "x":8, "y":0}, {"label":"K09", "x":9, "y":0}, {"label":"K0A", "x":10, "y":0}, {"label":"K0B", "x":11, "y":0}, {"label":"K10", "x":0, "y":1, "w":1.5}, {"label":"K11", "x":1.5, "y":1}, {"label":"K12", "x":2.5, "y":1}, {"label":"K13", "x":3.5, "y":1}, {"label":"K14", "x":4.5, "y":1}, {"label":"K15", "x":5.5, "y":1}, {"label":"K16", "x":6.5, "y":1}, {"label":"K17", "x":7.5, "y":1}, {"label":"K18", "x":8.5, "y":1}, {"label":"K19", "x":9.5, "y":1}, {"label":"K1A", "x":10.5, "y":1, "w":1.5}, {"label":"K20", "x":0, "y":2}, {"label":"K21", "x":1, "y":2}, {"label":"K22", "x":2, "y":2}, {"label":"K23", "x":3, "y":2}, {"label":"K24", "x":4, "y":2}, {"label":"K25", "x":5, "y":2}, {"label":"K26", "x":6, "y":2}, {"label":"K27", "x":7, "y":2}, {"label":"K28", "x":8, "y":2}, {"label":"K29", "x":9, "y":2}, {"label":"K2A", "x":10, "y":2}, {"label":"K2B", "x":11, "y":2}, {"label":"K30", "x":0, "y":3, "w":1.25}, {"label":"K31", "x":1.25, "y":3, "w":1.25}, {"label":"K32", "x":2.5, "y":3, "w":1.25}, {"label":"K33", "x":3.75, "y":3, "w":1.25}, {"label":"K34", "x":5, "y":3, "w":2.75}, {"label":"K35", "x":7.75, "y":3, "w":1.25}, {"label":"K36", "x":9, "y":3}, {"label":"K37", "x":10, "y":3}, {"label":"K38", "x":11, "y":3}] - } - } -} diff --git a/keyboards/bantam44/keymaps/default/keymap.c b/keyboards/bantam44/keymaps/default/keymap.c deleted file mode 100644 index dff91d6c20e..00000000000 --- a/keyboards/bantam44/keymaps/default/keymap.c +++ /dev/null @@ -1,30 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base */ - [0] = LAYOUT( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, \ - KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, MO(2), KC_SCLN, KC_QUOT, KC_SLSH \ - ), - /* LOWER */ - [1] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT, \ - KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_ENT, \ - KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_SPC, KC_TRNS, KC_END, KC_PGDN, KC_EXLM \ - ), - /* RAISE */ - [2] = LAYOUT( \ - KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT, \ - KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_ENT, \ - KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_SPC, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT \ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function -{ - return MACRO_NONE; -}; diff --git a/keyboards/bantam44/readme.md b/keyboards/bantam44/readme.md deleted file mode 100644 index 08a5167c6f9..00000000000 --- a/keyboards/bantam44/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -Bantam-44 -=== - -A small mechanical keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: Bantam-44 PCB -Hardware Availability: http://www.bantamkeyboards.com - -Make example for this keyboard (after setting up your build environment): - - make bantam44:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk deleted file mode 100644 index f245a3ba102..00000000000 --- a/keyboards/bantam44/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/bfake/bfake.c b/keyboards/bfake/bfake.c deleted file mode 100644 index 2160706fea5..00000000000 --- a/keyboards/bfake/bfake.c +++ /dev/null @@ -1,66 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "bfake.h" -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -#include - -#include "action_layer.h" -#include "i2c.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void backlight_init_ports(void) { - DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); -} - -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); - } else { - // Turn on the lights - PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - } -} diff --git a/keyboards/bfake/bfake.h b/keyboards/bfake/bfake.h deleted file mode 100644 index 599ea0f870e..00000000000 --- a/keyboards/bfake/bfake.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef BFAKE_H -#define BFAKE_H - -#include "quantum.h" - -#define LAYOUT_all( \ - K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K10, K60,\ - K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ - K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ - K19, K13, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, K50,\ - K09, K00, K39, K30, K59, K69, K57, K29\ -){ \ - { KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ - { KC_NO, K11, K12, K13, K14, K15, K16, KC_NO, K18, K19, K10}, \ - { KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ - { KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, K50}, \ - { KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ - { KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ -} - -#define LAYOUT_60_ansi( \ - K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K60,\ - K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ - K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ - K19, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, \ - K09, K00, K39, K30, K59, K69, K57, K29\ -){ \ - { KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ - { KC_NO, K11, K12, KC_NO, K14, K15, K16, KC_NO, K18, K19, KC_NO}, \ - { KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ - { KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, KC_NO}, \ - { KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ - { KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ -} - -#endif diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h deleted file mode 100644 index 235181d0954..00000000000 --- a/keyboards/bfake/config.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef BFAKE_CONFIG_H -#define BFAKE_CONFIG_H - -#include "config_common.h" - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define MANUFACTURER NotActuallyWinkeyless -#define PRODUCT b.fake - -#define RGBLED_NUM 16 - -#define MATRIX_ROWS 8 -#define MATRIX_COLS 11 - -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6} -#define UNUSED_PINS - -#define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - -#define NO_BACKLIGHT_CLOCK -#define BACKLIGHT_LEVELS 1 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 - -#endif diff --git a/keyboards/bfake/i2c.c b/keyboards/bfake/i2c.c deleted file mode 100644 index a4f95213524..00000000000 --- a/keyboards/bfake/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/bfake/info.json b/keyboards/bfake/info.json deleted file mode 100644 index 761cbdc54bf..00000000000 --- a/keyboards/bfake/info.json +++ /dev/null @@ -1,16 +0,0 @@ -{ - "keyboard_name": "b.fake", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - } - } -} diff --git a/keyboards/bfake/keymaps/default/keymap.c b/keyboards/bfake/keymaps/default/keymap.c deleted file mode 100644 index a237f8489e7..00000000000 --- a/keyboards/bfake/keymaps/default/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL - ), - [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL, - MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, MO(2), - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - diff --git a/keyboards/bfake/keymaps/mechmerlin/keymap.c b/keyboards/bfake/keymaps/mechmerlin/keymap.c deleted file mode 100644 index 35b59e6a42f..00000000000 --- a/keyboards/bfake/keymaps/mechmerlin/keymap.c +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(2), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL - ), - [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT - ), - - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - diff --git a/keyboards/bfake/keymaps/mechmerlin/readme.md b/keyboards/bfake/keymaps/mechmerlin/readme.md deleted file mode 100644 index b85b6537c1c..00000000000 --- a/keyboards/bfake/keymaps/mechmerlin/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -MechMerlin's FaceW Sprit Edition Layout -====================== - -This is the preferred 60% layout used by u/merlin36, host of the [MechMerlin YouTube channel](www.youtube.com/mechmerlin). - -## Keyboard Notes -- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) -- Uses ps2avru instead of ps2avrgb -- To put in reset mode hold `q` while inserting the USB cable -- Use flashing instructions from ps2avrgb QMK port - -## Keymap Notes -- Does not support any form of inswitch lighting as Merlin hates them. -- Arrow toggle switch to the right of right shift -- Reset is FN + Left Shift + R - -### Build -To build this keymap, simply run `make bfake:mechmerlin` from the qmk_firmware directory. diff --git a/keyboards/bfake/matrix.c b/keyboards/bfake/matrix.c deleted file mode 100644 index 57aa36b5ff7..00000000000 --- a/keyboards/bfake/matrix.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -#define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/bfake/readme.md b/keyboards/bfake/readme.md deleted file mode 100644 index 1ccc25f2dc9..00000000000 --- a/keyboards/bfake/readme.md +++ /dev/null @@ -1,44 +0,0 @@ -B.fake -======== - -A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by [winkeyless](https://winkeyless.kr/). However, the switch matrix is actually the same as the [FaceW](https://github.com/qmk/qmk_firmware/tree/master/keyboards/facew), a ps2avr PCB sold on [mechanicalkeyboards.com](https://mechanicalkeyboards.com/). - -Keyboard Maintainer: QMK Community -Hardware Supported: B.fake PCB -Hardware Availability: https://www.aliexpress.com/store/product/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/2230037_32731084597.html - -Make example for this keyboard (after setting up your build environment): - - make bfake:default - -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk deleted file mode 100644 index 6577ea193fd..00000000000 --- a/keyboards/bfake/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = yes -MOUSEKEY_ENABLE = yes -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/bfake/usbconfig.h b/keyboards/bfake/usbconfig.h deleted file mode 100644 index d2d848fcdc8..00000000000 --- a/keyboards/bfake/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/bigseries/1key/1key.c b/keyboards/bigseries/1key/1key.c deleted file mode 100755 index 6036bd99916..00000000000 --- a/keyboards/bigseries/1key/1key.c +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "1key.h" - -void matrix_scan_kb(void) { - // Looping keyboard code goes here - // This runs every cycle (a lot) - matrix_scan_user(); -#ifdef BACKLIGHT_ENABLE - backlight_task(); -#endif -}; diff --git a/keyboards/bigseries/1key/1key.h b/keyboards/bigseries/1key/1key.h deleted file mode 100755 index 34414077986..00000000000 --- a/keyboards/bigseries/1key/1key.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef BIGSWITCH_H -#define BIGSWITCH_H - -#include "quantum.h" - -#define LAYOUT( \ - K00 \ -) { \ - { K00 } \ -} - -#endif diff --git a/keyboards/bigseries/1key/config.h b/keyboards/bigseries/1key/config.h deleted file mode 100755 index 66a01247214..00000000000 --- a/keyboards/bigseries/1key/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6071 -#define DEVICE_VER 0x0002 -#define MANUFACTURER WoodKeys.click -#define PRODUCT BigSeries Single Keyboard -#define DESCRIPTION Single key board for Novelkeys Big Series Switch - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0 } -#define MATRIX_COL_PINS { B4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 50 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 5 -#ifdef RGBLIGHT_LIMIT_VAL -#undef RGBLIGHT_LIMIT_VAL -#endif -#define RGBLIGHT_LIMIT_VAL 128 -#endif - -#endif diff --git a/keyboards/bigseries/1key/info.json b/keyboards/bigseries/1key/info.json deleted file mode 100644 index ff2fd54c575..00000000000 --- a/keyboards/bigseries/1key/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Big Series 1-Key", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0, "w":4, "h":4}] - } - } -} diff --git a/keyboards/bigseries/1key/keymaps/8ball/keymap.c b/keyboards/bigseries/1key/keymaps/8ball/keymap.c deleted file mode 100755 index 1097eb94afa..00000000000 --- a/keyboards/bigseries/1key/keymaps/8ball/keymap.c +++ /dev/null @@ -1,144 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -static const char * const ANSWERS[] = { -// "Yes" answers -"It is certain\n", -"It is decidedly so\n", -"Without a doubt\n", -"Yes definitely\n", -"You may rely on it\n", -"As I see it, yes\n", -"Most likely\n", -"Outlook good\n", -"Yes\n", -"Signs point to yes\n", -// Uncertain answers, index 10 -"Reply hazy try again\n", -"Ask again later\n", -"Better not tell you now\n", -"Cannot predict now\n", -"Concentrate and ask again\n", -// "No" answers, index 15 -"Don't count on it\n", -"My reply is no\n", -"My sources say no\n", -"Outlook not so good\n", -"Very doubtful\n" -}; - -#define UNCERTAIN_BREAK 10 -#define NO_BREAK 15 -#define NUM_ANSWERS 20 -// Timeout of answer color in ms -#define ANSWER_TIMEOUT 3000 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A), -}; - - -void reset_rgb(void); - -bool initialized = 0; -uint32_t lastTime = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - rgblight_enable(); - reset_rgb(); - initialized = 1; - } -} - -void matrix_scan_user(void) { - if (lastTime > 0 && timer_elapsed32(lastTime) > ANSWER_TIMEOUT) { - lastTime = 0; - reset_rgb(); - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_A: - if (record->event.pressed) { - uint8_t num = rand() / (RAND_MAX / NUM_ANSWERS + 1); - rgblight_mode(1); - if (num < UNCERTAIN_BREAK) { - rgblight_setrgb_green(); - } else if (num < NO_BREAK) { - rgblight_setrgb_yellow(); - } else { - rgblight_setrgb_red(); - } - send_string(ANSWERS[num]); - lastTime = timer_read32(); - return false; - } - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - -void reset_rgb(void) { - // This gets called on init and after the timeout for the answer color - // If you want to change the default color/mode, do it here - rgblight_sethsv_blue(); - rgblight_mode(7); -} diff --git a/keyboards/bigseries/1key/keymaps/ctrl-alt-del/keymap.c b/keyboards/bigseries/1key/keymaps/ctrl-alt-del/keymap.c deleted file mode 100755 index eb2d236827c..00000000000 --- a/keyboards/bigseries/1key/keymaps/ctrl-alt-del/keymap.c +++ /dev/null @@ -1,91 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - LCTL(LALT(KC_DEL)) - ), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(7); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/1key/keymaps/default/keymap.c b/keyboards/bigseries/1key/keymaps/default/keymap.c deleted file mode 100755 index 7ce837357f1..00000000000 --- a/keyboards/bigseries/1key/keymaps/default/keymap.c +++ /dev/null @@ -1,93 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - rgblight_enable(); - rgblight_mode(7); - rgblight_sethsv(0,255,255); - rgblight_setrgb(0x00, 0x00, 0xFF); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_A: - if (record->event.pressed) { - SEND_STRING("Howdy!!\n"); - rgblight_step(); - return false; - } - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/1key/keymaps/dudeofawesome/README.md b/keyboards/bigseries/1key/keymaps/dudeofawesome/README.md deleted file mode 100644 index 86b79b4621b..00000000000 --- a/keyboards/bigseries/1key/keymaps/dudeofawesome/README.md +++ /dev/null @@ -1,18 +0,0 @@ -# DudeOfAwesome's Big Series 1-key layout - -## Features - -### Tap dancing taps: -1. Media Play / Pause -1. Media Next -1. RGB Mode Next -1. RGB Mode Previous - -## Building and flashing - -1. Put your board in DFU mode with the button on the bottom -1. Flash: - ```bash - $ make bigseries:dudeofawesome:dfu - ``` - diff --git a/keyboards/bigseries/1key/keymaps/dudeofawesome/config.h b/keyboards/bigseries/1key/keymaps/dudeofawesome/config.h deleted file mode 100644 index 30b86224c64..00000000000 --- a/keyboards/bigseries/1key/keymaps/dudeofawesome/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#define TAPPING_TERM 1000 - -#endif diff --git a/keyboards/bigseries/1key/keymaps/dudeofawesome/keymap.c b/keyboards/bigseries/1key/keymaps/dudeofawesome/keymap.c deleted file mode 100755 index 4c3739bbeb1..00000000000 --- a/keyboards/bigseries/1key/keymaps/dudeofawesome/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -enum TAP_DANCE { - TD_PLAY = 0, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT(TD(TD_PLAY)), -}; - -void tap_dance (qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 0 ... 1: - register_code(KC_MEDIA_PLAY_PAUSE); - unregister_code(KC_MEDIA_PLAY_PAUSE); - break; - case 2: - register_code(KC_MEDIA_NEXT_TRACK); - unregister_code(KC_MEDIA_NEXT_TRACK); - break; - case 3: - rgblight_step(); - break; - case 4: default: - rgblight_step_reverse(); - break; - } -} - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_PLAY] = ACTION_TAP_DANCE_FN(tap_dance), -}; diff --git a/keyboards/bigseries/1key/keymaps/dudeofawesome/rules.mk b/keyboards/bigseries/1key/keymaps/dudeofawesome/rules.mk deleted file mode 100644 index e5ddcae8d92..00000000000 --- a/keyboards/bigseries/1key/keymaps/dudeofawesome/rules.mk +++ /dev/null @@ -1 +0,0 @@ -TAP_DANCE_ENABLE = yes diff --git a/keyboards/bigseries/1key/keymaps/leddance/config.h b/keyboards/bigseries/1key/keymaps/leddance/config.h deleted file mode 100644 index 57398fb996b..00000000000 --- a/keyboards/bigseries/1key/keymaps/leddance/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#define TAPPING_TERM 400 - -#endif diff --git a/keyboards/bigseries/1key/keymaps/leddance/keymap.c b/keyboards/bigseries/1key/keymaps/leddance/keymap.c deleted file mode 100755 index 3cd8f1db7f1..00000000000 --- a/keyboards/bigseries/1key/keymaps/leddance/keymap.c +++ /dev/null @@ -1,127 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - - -extern rgblight_config_t rgblight_config; - -enum custom_keycodes { - BL = SAFE_RANGE -}; - -enum custom_layers { - BASE = 0, - LED -}; - -//Tap Dance Declarations -enum { - TD_TOGGLE = 0 -}; - -void dance_toggle (qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 2) { - println("Double tapped, switching layers"); - if (layer_state_is(LED)) { - layer_off(LED); - } else { - layer_on(LED); - } - } else { - print("Single tapped: "); - if (layer_state_is(LED)) { -#ifdef RGBLIGHT_ENABLE - if (!rgblight_config.enable) { - rgblight_enable(); - } - rgblight_step(); -#endif - } else { - println("Base layer, sending string"); - SEND_STRING("This thing is BIG!!\n"); - } - } -} - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_TOGGLE] = ACTION_TAP_DANCE_FN(dance_toggle) -// Other declarations would go here, separated by commas, if you have them -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[BASE] = LAYOUT( - TD(TD_TOGGLE)), -[LED] = LAYOUT( - TD(TD_TOGGLE) - ) - - -}; - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - // Nothing here, see dance_toggle - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/1key/keymaps/leddance/rules.mk b/keyboards/bigseries/1key/keymaps/leddance/rules.mk deleted file mode 100644 index 1ba2fa8fbef..00000000000 --- a/keyboards/bigseries/1key/keymaps/leddance/rules.mk +++ /dev/null @@ -1 +0,0 @@ -TAP_DANCE_ENABLE = yes \ No newline at end of file diff --git a/keyboards/bigseries/1key/keymaps/lock/keymap.c b/keyboards/bigseries/1key/keymaps/lock/keymap.c deleted file mode 100755 index 3d3b002b02a..00000000000 --- a/keyboards/bigseries/1key/keymaps/lock/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - LGUI(KC_L)), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(7); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/1key/keymaps/tester/keymap.c b/keyboards/bigseries/1key/keymaps/tester/keymap.c deleted file mode 100755 index 31553cef79e..00000000000 --- a/keyboards/bigseries/1key/keymaps/tester/keymap.c +++ /dev/null @@ -1,96 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(35); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_A: - if (record->event.pressed) { - SEND_STRING("Howdy!!\n"); - rgblight_step(); - return false; - } - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/1key/readme.md b/keyboards/bigseries/1key/readme.md deleted file mode 100644 index ad3ee28b14f..00000000000 --- a/keyboards/bigseries/1key/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Big Series Keyboard - -![Big Series 1-Key](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg) - -A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/). - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click) -Hardware Supported: Big Series PCBs -Hardware Availability: [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz) - -Make example for this keyboard (after setting up your build environment): - - make bigseries/1key:default - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information. diff --git a/keyboards/bigseries/1key/rules.mk b/keyboards/bigseries/1key/rules.mk deleted file mode 100755 index 772d56beb6d..00000000000 --- a/keyboards/bigseries/1key/rules.mk +++ /dev/null @@ -1 +0,0 @@ -# Dummy file to make the QMK build system happy \ No newline at end of file diff --git a/keyboards/bigseries/2key/2key.c b/keyboards/bigseries/2key/2key.c deleted file mode 100755 index cffb71907e4..00000000000 --- a/keyboards/bigseries/2key/2key.c +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "2key.h" - -void matrix_scan_kb(void) { - // Looping keyboard code goes here - // This runs every cycle (a lot) - matrix_scan_user(); -#ifdef BACKLIGHT_ENABLE - backlight_task(); -#endif -}; diff --git a/keyboards/bigseries/2key/2key.h b/keyboards/bigseries/2key/2key.h deleted file mode 100755 index dcbf2f764c4..00000000000 --- a/keyboards/bigseries/2key/2key.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef BIGSWITCH_H -#define BIGSWITCH_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01 \ -) { \ - { K00, K01 } \ -} - -#endif diff --git a/keyboards/bigseries/2key/config.h b/keyboards/bigseries/2key/config.h deleted file mode 100755 index 535be27e76f..00000000000 --- a/keyboards/bigseries/2key/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6071 -#define DEVICE_VER 0x0002 -#define MANUFACTURER WoodKeys.click -#define PRODUCT BigSeries Single Keyboard -#define DESCRIPTION Single key board for Novelkeys Big Series Switch - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 2 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0 } -#define MATRIX_COL_PINS { B4, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 50 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#ifdef RGBLIGHT_LIMIT_VAL -#undef RGBLIGHT_LIMIT_VAL -#endif -#define RGBLIGHT_LIMIT_VAL 128 -#endif - -#endif diff --git a/keyboards/bigseries/2key/info.json b/keyboards/bigseries/2key/info.json deleted file mode 100644 index 2aea4d20056..00000000000 --- a/keyboards/bigseries/2key/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Big Series 2-Key", - "url": "", - "maintainer": "qmk", - "width": 8, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0, "w":4, "h":4}, {"x":4, "y":0, "w":4, "h":4}] - } - } -} diff --git a/keyboards/bigseries/2key/keymaps/default/keymap.c b/keyboards/bigseries/2key/keymaps/default/keymap.c deleted file mode 100755 index 704649632bf..00000000000 --- a/keyboards/bigseries/2key/keymaps/default/keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_Z, KC_X), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(35); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/2key/keymaps/lock/keymap.c b/keyboards/bigseries/2key/keymaps/lock/keymap.c deleted file mode 100755 index 55a9240f32f..00000000000 --- a/keyboards/bigseries/2key/keymaps/lock/keymap.c +++ /dev/null @@ -1,89 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - LGUI(KC_L), LCTL(LALT(KC_DEL)) - ), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(7); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/2key/keymaps/tester/keymap.c b/keyboards/bigseries/2key/keymaps/tester/keymap.c deleted file mode 100755 index 5b574824d33..00000000000 --- a/keyboards/bigseries/2key/keymaps/tester/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A, KC_B), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(35); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/2key/readme.md b/keyboards/bigseries/2key/readme.md deleted file mode 100644 index e882433017d..00000000000 --- a/keyboards/bigseries/2key/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Big Series Keyboard - -![Big Series 2-Key](https://woodkeys.click/wp-content/uploads/2018/04/BigSeries_2u_Case_2018-Apr-03_08-45-05PM-000_CustomizedView8990071229.png) - -A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/). - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click) -Hardware Supported: Big Series PCBs -Hardware Availability: [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz) - -Make example for this keyboard (after setting up your build environment): - - make bigseries/2key:default - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information. diff --git a/keyboards/bigseries/2key/rules.mk b/keyboards/bigseries/2key/rules.mk deleted file mode 100755 index 772d56beb6d..00000000000 --- a/keyboards/bigseries/2key/rules.mk +++ /dev/null @@ -1 +0,0 @@ -# Dummy file to make the QMK build system happy \ No newline at end of file diff --git a/keyboards/bigseries/3key/3key.c b/keyboards/bigseries/3key/3key.c deleted file mode 100755 index 3735c105438..00000000000 --- a/keyboards/bigseries/3key/3key.c +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "3key.h" - -void matrix_scan_kb(void) { - // Looping keyboard code goes here - // This runs every cycle (a lot) - matrix_scan_user(); -#ifdef BACKLIGHT_ENABLE - backlight_task(); -#endif -}; diff --git a/keyboards/bigseries/3key/3key.h b/keyboards/bigseries/3key/3key.h deleted file mode 100755 index 6aa843c263f..00000000000 --- a/keyboards/bigseries/3key/3key.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef BIGSWITCH_H -#define BIGSWITCH_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02 \ -) { \ - { K00, K01, K02 } \ -} - -#endif diff --git a/keyboards/bigseries/3key/config.h b/keyboards/bigseries/3key/config.h deleted file mode 100755 index faf16672559..00000000000 --- a/keyboards/bigseries/3key/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6073 -#define DEVICE_VER 0x0001 -#define MANUFACTURER WoodKeys.click -#define PRODUCT BigSeries Triple Keyboard -#define DESCRIPTION Triple key board for Novelkeys Big Series Switch - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 3 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0 } -#define MATRIX_COL_PINS { B4, B3, B5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 50 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 11 -#ifdef RGBLIGHT_LIMIT_VAL -#undef RGBLIGHT_LIMIT_VAL -#endif -#define RGBLIGHT_LIMIT_VAL 128 -#endif - -#endif diff --git a/keyboards/bigseries/3key/info.json b/keyboards/bigseries/3key/info.json deleted file mode 100644 index 8f0b8c55c20..00000000000 --- a/keyboards/bigseries/3key/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Big Series 3-Key", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0, "w":4, "h":4}, {"x":4, "y":0, "w":4, "h":4}, {"x":8, "y":0, "w":4, "h":4}] - } - } -} diff --git a/keyboards/bigseries/3key/keymaps/ctrl-alt-del/keymap.c b/keyboards/bigseries/3key/keymaps/ctrl-alt-del/keymap.c deleted file mode 100755 index 8e5b10db8bc..00000000000 --- a/keyboards/bigseries/3key/keymaps/ctrl-alt-del/keymap.c +++ /dev/null @@ -1,91 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_LCTL, KC_LALT, KC_DEL - ), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(7); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/3key/keymaps/default/keymap.c b/keyboards/bigseries/3key/keymaps/default/keymap.c deleted file mode 100755 index 6f0ffc9e117..00000000000 --- a/keyboards/bigseries/3key/keymaps/default/keymap.c +++ /dev/null @@ -1,95 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A, KC_B, KC_C - ), -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(7); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_A: - if (record->event.pressed) { - SEND_STRING("Howdy!!\n"); - rgblight_step(); - return false; - } - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/3key/keymaps/tester/keymap.c b/keyboards/bigseries/3key/keymaps/tester/keymap.c deleted file mode 100755 index 896a781fc5e..00000000000 --- a/keyboards/bigseries/3key/keymaps/tester/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_1, KC_2, KC_3), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(35); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/3key/readme.md b/keyboards/bigseries/3key/readme.md deleted file mode 100644 index d32ec486a04..00000000000 --- a/keyboards/bigseries/3key/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Big Series Keyboard - -![Big Series 3-Key](https://woodkeys.click/wp-content/uploads/2018/04/BigSeries_3u_Case_2018-Apr-03_07-03-31PM-000_CustomizedView20086357020.png) - -A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/). - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click) -Hardware Supported: Big Series PCBs -Hardware Availability: [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz) - -Make example for this keyboard (after setting up your build environment): - - make bigseries/3key:default - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information. diff --git a/keyboards/bigseries/3key/rules.mk b/keyboards/bigseries/3key/rules.mk deleted file mode 100755 index 772d56beb6d..00000000000 --- a/keyboards/bigseries/3key/rules.mk +++ /dev/null @@ -1 +0,0 @@ -# Dummy file to make the QMK build system happy \ No newline at end of file diff --git a/keyboards/bigseries/4key/4key.c b/keyboards/bigseries/4key/4key.c deleted file mode 100755 index 891f11bbb01..00000000000 --- a/keyboards/bigseries/4key/4key.c +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "4key.h" - -void matrix_scan_kb(void) { - // Looping keyboard code goes here - // This runs every cycle (a lot) - matrix_scan_user(); -}; diff --git a/keyboards/bigseries/4key/4key.h b/keyboards/bigseries/4key/4key.h deleted file mode 100755 index 21373fdeda4..00000000000 --- a/keyboards/bigseries/4key/4key.h +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef BIGSWITCH_H -#define BIGSWITCH_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, \ - K10, K11 \ -) { \ - { K00, K01 }, \ - { K10, K11 } \ -} - -#endif diff --git a/keyboards/bigseries/4key/config.h b/keyboards/bigseries/4key/config.h deleted file mode 100755 index 79fdeb6edcd..00000000000 --- a/keyboards/bigseries/4key/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6074 -#define DEVICE_VER 0x0002 -#define MANUFACTURER WoodKeys.click -#define PRODUCT BigSeries Quad Keyboard -#define DESCRIPTION 4-key board for Novelkeys Big Series Switch - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 2 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0, B5 } -#define MATRIX_COL_PINS { B4, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 50 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 12 -#ifdef RGBLIGHT_LIMIT_VAL -#undef RGBLIGHT_LIMIT_VAL -#endif -#define RGBLIGHT_LIMIT_VAL 128 -#endif - -#endif diff --git a/keyboards/bigseries/4key/info.json b/keyboards/bigseries/4key/info.json deleted file mode 100644 index 0bdee578a73..00000000000 --- a/keyboards/bigseries/4key/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Big Series 4-Key", - "url": "", - "maintainer": "qmk", - "width": 8, - "height": 8, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0, "w":4, "h":4}, {"x":4, "y":0, "w":4, "h":4}, {"x":0, "y":4, "w":4, "h":4}, {"x":4, "y":4, "w":4, "h":4}] - } - } -} diff --git a/keyboards/bigseries/4key/keymaps/default/keymap.c b/keyboards/bigseries/4key/keymaps/default/keymap.c deleted file mode 100755 index 1c65f44b08a..00000000000 --- a/keyboards/bigseries/4key/keymaps/default/keymap.c +++ /dev/null @@ -1,89 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_HOME, KC_PGUP, - KC_END, KC_PGDN), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - rgblight_enable(); - rgblight_mode(7); - rgblight_sethsv(0,255,255); - rgblight_setrgb(0x00, 0x00, 0xFF); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - rgblight_step(); - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/4key/keymaps/tester/keymap.c b/keyboards/bigseries/4key/keymaps/tester/keymap.c deleted file mode 100755 index 5d5fe0d3866..00000000000 --- a/keyboards/bigseries/4key/keymaps/tester/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2018 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT( - KC_A, KC_B, KC_C, KC_D), - - -}; - - -bool initialized = 0; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - -void matrix_init_user(void) { - if (!initialized){ - dprintf("Initializing in matrix_scan_user"); - // Disable to set a known state - rgblight_disable(); - rgblight_init(); - // None of the subsequent operations take effect if not enabled - rgblight_enable(); - rgblight_sethsv(0,0,255); - rgblight_mode(35); - initialized = 1; - } -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/bigseries/4key/readme.md b/keyboards/bigseries/4key/readme.md deleted file mode 100644 index ec40e83f2cd..00000000000 --- a/keyboards/bigseries/4key/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Big Series Keyboard - -![Big Series 4-Key](https://woodkeys.click/wp-content/uploads/2017/09/BigSeries_4u_with_keys_2018-Apr-01_04-54-09AM-000_CustomizedView38438685666_png.png) - -A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/). - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click) -Hardware Supported: Big Series PCBs -Hardware Availability: [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz) - -Make example for this keyboard (after setting up your build environment): - - make bigseries/4key:default - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information. diff --git a/keyboards/bigseries/4key/rules.mk b/keyboards/bigseries/4key/rules.mk deleted file mode 100755 index 772d56beb6d..00000000000 --- a/keyboards/bigseries/4key/rules.mk +++ /dev/null @@ -1 +0,0 @@ -# Dummy file to make the QMK build system happy \ No newline at end of file diff --git a/keyboards/bigseries/readme.md b/keyboards/bigseries/readme.md deleted file mode 100644 index 0b406673537..00000000000 --- a/keyboards/bigseries/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Big Series Keyboards - -![Big Series Keyboards](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg) - -The is the parent folder for all PCBs made by [Woodkeys](https://woodkeys.click) for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/). - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click) -Hardware Supported: Big Series PCBs -Hardware Availability: [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz) - -Make example for these keyboards (after setting up your build environment): - - make bigseries/1key:default - make bigseries/3key:ctrl-alt-del - -See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/build-compile-instructions) for more information. diff --git a/keyboards/bigseries/rules.mk b/keyboards/bigseries/rules.mk deleted file mode 100755 index c862f0b2564..00000000000 --- a/keyboards/bigseries/rules.mk +++ /dev/null @@ -1,57 +0,0 @@ -# MCU name -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled -AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below -RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. - diff --git a/keyboards/bigswitch/README.md b/keyboards/bigswitch/README.md deleted file mode 100644 index 65213af7c4b..00000000000 --- a/keyboards/bigswitch/README.md +++ /dev/null @@ -1,14 +0,0 @@ -Big Switch PCB by flehrad -========================= - -Designed by Don of the Board Podcast and sold as a kit by [keeb.io](https://keeb.io/collections/frontpage/products/big-switch-pcb?variant=7507922845726) - -### PCB Files - -https://github.com/flehrad/Big-Switch-PCB - -### Technical Specifications - - * Uses a atmega32u4 pro micro or pin compatible MCU - * Pins B5 and B6 connect to the pins on the Big Switch - * Optionally you may add a RGB strip to pin D3 for data and take power from VCC and GND diff --git a/keyboards/bigswitch/bigswitch.c b/keyboards/bigswitch/bigswitch.c deleted file mode 100644 index 32f9f7fab82..00000000000 --- a/keyboards/bigswitch/bigswitch.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2018 QMK Contributors - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "bigswitch.h" - -volatile uint8_t runonce = true; -static uint16_t my_timer; - -__attribute__ ((weak)) -void matrix_init_user(void) { - my_timer = timer_read(); -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -#if defined(RGBLIGHT_ENABLE) - if (runonce && timer_elapsed(my_timer) > 1000) { - runonce = false; - rgblight_sethsv_noeeprom(0x0, 0xff, 0x80); - rgblight_mode_noeeprom(9); - rgblight_enable_noeeprom(); - } -#endif -} diff --git a/keyboards/bigswitch/bigswitch.h b/keyboards/bigswitch/bigswitch.h deleted file mode 100755 index ea3d51a1f3b..00000000000 --- a/keyboards/bigswitch/bigswitch.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2018 QMK Contributors - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef BIGSWITCH_H -#define BIGSWITCH_H - -#include "quantum.h" - -#define LAYOUT( \ - K00 \ -) { \ - { K00 } \ -} - -#endif diff --git a/keyboards/bigswitch/config.h b/keyboards/bigswitch/config.h deleted file mode 100755 index 220f2591bfe..00000000000 --- a/keyboards/bigswitch/config.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -Copyright 2018 QMK Contributors - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x1209 -#define PRODUCT_ID 0xB195 -#define DEVICE_VER 0x0001 -#define MANUFACTURER flehrad -#define PRODUCT BigSwitch PCB -#define DESCRIPTION A single key board for Novelkeys Big Switch - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B5 } -#define MATRIX_COL_PINS { B6 } -#define UNUSED_PINS { } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 50 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#endif - -#endif diff --git a/keyboards/bigswitch/info.json b/keyboards/bigswitch/info.json deleted file mode 100644 index 8d3d746f577..00000000000 --- a/keyboards/bigswitch/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Bigswitch PCB", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0, "w":4, "h":4}] - } - } -} diff --git a/keyboards/bigswitch/keymaps/333fred/config.h b/keyboards/bigswitch/keymaps/333fred/config.h deleted file mode 100644 index 76f13f08b5c..00000000000 --- a/keyboards/bigswitch/keymaps/333fred/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2018 Fredric Silberberg (333fred) - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -// Long tapping term on the big switch, because it takes so long to press -#define TAPPING_TERM 500 diff --git a/keyboards/bigswitch/keymaps/333fred/keymap.c b/keyboards/bigswitch/keymaps/333fred/keymap.c deleted file mode 100644 index be40fecb23c..00000000000 --- a/keyboards/bigswitch/keymaps/333fred/keymap.c +++ /dev/null @@ -1,123 +0,0 @@ -#include QMK_KEYBOARD_H - -typedef enum { - SINGLE_TAP, SINGLE_HOLD, DOUBLE, TRIPLE, QUAD -} tap_dance_state_enum; - -enum { - TD_KEY = 0 -}; - -static tap_dance_state_enum tap_dance_state; -static bool tap_dance_active = false; -static uint16_t timer; - -void dance_cycle(bool override_timer) { - if (tap_dance_active) - { - if (timer_elapsed(timer) > 100 || override_timer) - { - switch (tap_dance_state) - { - case SINGLE_HOLD: - { - rgblight_increase_hue_noeeprom(); - break; - } - - case DOUBLE: - { - rgblight_step_noeeprom(); - break; - } - - case TRIPLE: - { - rgblight_toggle_noeeprom(); - break; - } - - default: - // Not needed - break; - } - - timer = timer_read(); - } - } -} - -void dance_finished(qk_tap_dance_state_t *state, void* user_data) { - // Determine the current state - switch (state->count) - { - case 1: - { - if (state->interrupted || state->pressed == 0) tap_dance_state = SINGLE_TAP; - else tap_dance_state = SINGLE_HOLD; - break; - } - case 2: - { - tap_dance_state = DOUBLE; - break; - } - case 3: - { - tap_dance_state = TRIPLE; - break; - } - default: - { - tap_dance_state = QUAD; - break; - } - } - - switch (tap_dance_state) - { - case SINGLE_TAP: - { - // VS Build: CTRL+SHIFT+B - send_string_with_delay_P(PSTR(SS_DOWN(X_LCTRL) SS_DOWN(X_LSHIFT) "b" SS_UP(X_LSHIFT) SS_UP(X_LCTRL)), 10); - tap_dance_active = false; - break; - } - - case SINGLE_HOLD: - case DOUBLE: - case TRIPLE: - { - // These are handled by the matrix_scan, which will register the appropriate rgb - // functions every scan - tap_dance_active = true; - timer = timer_read(); - dance_cycle(true); - break; - } - - case QUAD: - { - // Reprogram - reset_keyboard(); - break; - } - } -} - -void dance_reset(qk_tap_dance_state_t *state, void* user_data) -{ - tap_dance_active = false; -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_KEY] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_finished, dance_reset) -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT(TD(TD_KEY)) -}; - -void matrix_scan_user(void) { - dance_cycle(false); -} diff --git a/keyboards/bigswitch/keymaps/333fred/rules.mk b/keyboards/bigswitch/keymaps/333fred/rules.mk deleted file mode 100644 index 20aaadacbcd..00000000000 --- a/keyboards/bigswitch/keymaps/333fred/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# I'm not using things from my userpace in this one -USER_NAME = disable - -RGBLIGHT_ENABLE = yes -TAP_DANCE_ENABLE = yes diff --git a/keyboards/bigswitch/keymaps/default/keymap.c b/keyboards/bigswitch/keymaps/default/keymap.c deleted file mode 100755 index 210d001236c..00000000000 --- a/keyboards/bigswitch/keymaps/default/keymap.c +++ /dev/null @@ -1,27 +0,0 @@ -/* -Copyright 2018 QMK Contributors - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -#define KC_OSX_EJECT 0x66 -#define LOCK_OSX LSFT(LCTL(KC_OSX_EJECT)) -#define SLEEP_OSX LALT(LGUI(KC_OSX_EJECT)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -LAYOUT(SLEEP_OSX), - -}; diff --git a/keyboards/bigswitch/keymaps/wanleg/config.h b/keyboards/bigswitch/keymaps/wanleg/config.h deleted file mode 100644 index 54abb9a6c17..00000000000 --- a/keyboards/bigswitch/keymaps/wanleg/config.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2018 wanleg - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here -#undef MATRIX_ROW_PINS -#define MATRIX_ROW_PINS { B4 } -#undef MATRIX_COL_PINS -#define MATRIX_COL_PINS { B6 } - -/* COL2ROW, ROW2COL*/ -#undef DIODE_DIRECTION -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B5 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 -#define BREATHING_PERIOD 5 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#undef DEBOUNCE -#define DEBOUNCE 5 - -// set flashing LED with QMK DFU -#define QMK_LED B0 - -// set audio pin -#define C6_AUDIO diff --git a/keyboards/bigswitch/keymaps/wanleg/keymap.c b/keyboards/bigswitch/keymaps/wanleg/keymap.c deleted file mode 100644 index 76d0808fda9..00000000000 --- a/keyboards/bigswitch/keymaps/wanleg/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2018 wanleg - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#include "wanleg.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( /* Base */ -TD(CAD_TD) \ -), -[1] = LAYOUT( /*Secondary*/ -TD(BSW_TAP_DANCE) \ -), -}; \ No newline at end of file diff --git a/keyboards/bigswitch/keymaps/wanleg/rules.mk b/keyboards/bigswitch/keymaps/wanleg/rules.mk deleted file mode 100644 index a6c7d1d3f0e..00000000000 --- a/keyboards/bigswitch/keymaps/wanleg/rules.mk +++ /dev/null @@ -1,16 +0,0 @@ -#If using a ProMicro and it has the QMK DFU bootloader instead of Caterina, -#run "make : dfu=qmk" when compiling to ensure it is flagged properly after being flashed -ifeq ($(strip $(dfu)), qmk) - BOOTLOADER = qmk-dfu -endif - -AUDIO_ENABLE = yes # Audio output on port C6 -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) \ No newline at end of file diff --git a/keyboards/bigswitch/rules.mk b/keyboards/bigswitch/rules.mk deleted file mode 100755 index e4e72f09a2e..00000000000 --- a/keyboards/bigswitch/rules.mk +++ /dev/null @@ -1,60 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled -AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below -RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. - diff --git a/keyboards/blockey/blockey.h b/keyboards/blockey/blockey.h deleted file mode 100644 index fa7624be76e..00000000000 --- a/keyboards/blockey/blockey.h +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2018 Eucalyn - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef BLOCKEY_H -#define BLOCKEY_H - -#include "quantum.h" - -// readability -#define XXX KC_NO - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \ - k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, \ - k29, k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, \ - k42, k43, k44, k45, k46, k47, k48, k49, k50, k51, k52, k53, k54, \ - k55, k56, k57, k58, k59, k60, k61, k62 \ -) \ -{ \ - { k01, k02, k03, k04, k05, k06, k07 }, \ - { k15, k16, k17, k18, k19, k20, k21 }, \ - { k29, k30, k31, k32, k33, k34, k35 }, \ - { k42, k43, k44, k45, k46, k47, k48 }, \ - { k55, k56, k57, k58, XXX, XXX, k59 }, \ - { k08, k09, k10, k11, k12, k13, k14 }, \ - { k22, k23, k24, k25, k26, k27, k28 }, \ - { k36, k37, k38, k39, k40, k41, XXX }, \ - { k49, k50, k51, k52, k53, k54, XXX }, \ - { XXX, XXX, XXX, k60, k61, k62, XXX }, \ -} - -#endif diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h deleted file mode 100644 index 8934fd63a5c..00000000000 --- a/keyboards/blockey/config.h +++ /dev/null @@ -1,189 +0,0 @@ -/* -Copyright 2018 Eucalyn - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Eucalyn -#define PRODUCT Blockey -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 7 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D1, D4, E6, B5, D2, F6, B3, B2, B6 } -#define MATRIX_COL_PINS { D0, B4, C6, D7, F4, F5, F7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* ws2812 RGB LED */ -#define RGB_DI_PIN B1 - -#define RGBLED_NUM 4 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#define RGBLIGHT_ANIMATIONS - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/blockey/info.json b/keyboards/blockey/info.json deleted file mode 100644 index 61804897265..00000000000 --- a/keyboards/blockey/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "BlocKey", - "url": "", - "maintainer": "qmk", - "width": 14.16, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"`", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"Back Space", "x":13, "y":0}, {"label":"Tab", "x":0.16, "y":1}, {"label":"Q", "x":1.16, "y":1}, {"label":"W", "x":2.16, "y":1}, {"label":"E", "x":3.16, "y":1}, {"label":"R", "x":4.16, "y":1}, {"label":"T", "x":5.16, "y":1}, {"label":"Y", "x":6.16, "y":1}, {"label":"U", "x":7.16, "y":1}, {"label":"I", "x":8.16, "y":1}, {"label":"O", "x":9.16, "y":1}, {"label":"P", "x":10.16, "y":1}, {"label":"[", "x":11.16, "y":1}, {"label":"]", "x":12.16, "y":1}, {"label":"\\", "x":13.16, "y":1}, {"label":"LCtrl", "x":0.33, "y":2}, {"label":"A", "x":1.33, "y":2}, {"label":"S", "x":2.33, "y":2}, {"label":"D", "x":3.33, "y":2}, {"label":"F", "x":4.33, "y":2}, {"label":"G", "x":5.33, "y":2}, {"label":"H", "x":6.33, "y":2}, {"label":"J", "x":7.33, "y":2}, {"label":"K", "x":8.33, "y":2}, {"label":"L", "x":9.33, "y":2}, {"label":";", "x":10.33, "y":2}, {"label":"\"", "x":11.33, "y":2}, {"label":"Enter", "x":12.66, "y":2}, {"label":"LShift", "x":0.5, "y":3}, {"label":"Z", "x":1.5, "y":3}, {"label":"X", "x":2.5, "y":3}, {"label":"C", "x":3.5, "y":3}, {"label":"V", "x":4.5, "y":3}, {"label":"B", "x":5.5, "y":3}, {"label":"N", "x":6.5, "y":3}, {"label":"M", "x":7.5, "y":3}, {"label":",", "x":8.5, "y":3}, {"label":".", "x":9.5, "y":3}, {"label":"/", "x":10.5, "y":3}, {"label":"Up", "x":11.5, "y":3}, {"label":"Fn", "x":12.83, "y":3}, {"label":"Esc", "x":0, "y":4}, {"label":"Caps Lock", "x":1, "y":4}, {"label":"LAlt", "x":2, "y":4}, {"label":"LGUI", "x":3, "y":4}, {"label":"Space", "x":4, "y":4, "w":6}, {"label":"Left", "x":10.5, "y":4}, {"label":"Down", "x":11.5, "y":4}, {"label":"Right", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/blockey/keymaps/default/keymap.c b/keyboards/blockey/keymaps/default/keymap.c deleted file mode 100644 index 82366501aed..00000000000 --- a/keyboards/blockey/keymaps/default/keymap.c +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2018 Eucalyn - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(1), \ - KC_ESC, KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - [1] = LAYOUT( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ - _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ - ), - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/blockey/keymaps/eucalyn/keymap.c b/keyboards/blockey/keymaps/eucalyn/keymap.c deleted file mode 100644 index 99564cae165..00000000000 --- a/keyboards/blockey/keymaps/eucalyn/keymap.c +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2018 Eucalyn - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_COMM, KC_DOT, KC_SCLN, KC_M, KC_R, KC_D, KC_Y, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_LCTL, KC_A, KC_O, KC_E, KC_I, KC_U, KC_G, KC_T, KC_K, KC_S, KC_N, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_B, KC_H, KC_J, KC_L, KC_SLSH, KC_UP, MO(1), \ - KC_ESC, KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - [1] = LAYOUT( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ - _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ - ), - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/blockey/readme.md b/keyboards/blockey/readme.md deleted file mode 100644 index 20cb7e98cc1..00000000000 --- a/keyboards/blockey/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# BlocKey - -![BlocKey](https://i.imgur.com/VDdnuHo.jpg) - -A small keyboard. - -Keyboard Maintainer: [Eucalyn](https://github.com/eucalyn/) [@eucalyn_](https://twitter.com/eucalyn_) -Hardware Supported: BlocKey PCB, Pro Micro -Hardware Availability: - -Make example for this keyboard (after setting up your build environment): - - make blockey:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk deleted file mode 100644 index fb628cfaa3a..00000000000 --- a/keyboards/blockey/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -RGBLIGHT_ENABLE = yes diff --git a/keyboards/bm16a/bm16a.c b/keyboards/bm16a/bm16a.c deleted file mode 100644 index 3d616f29e9d..00000000000 --- a/keyboards/bm16a/bm16a.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "bm16a.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/bm16a/bm16a.h b/keyboards/bm16a/bm16a.h deleted file mode 100644 index cf8bab4730a..00000000000 --- a/keyboards/bm16a/bm16a.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_4x4( \ - K01, K02, K03, K04, \ - K11, K12, K13, K14, \ - K21, K22, K23, K24, \ - K31, K32, K33, K34 \ -) \ -{ \ - { K01, K02, K03, K04 }, \ - { K11, K12, K13, K14 }, \ - { K21, K22, K23, K24 }, \ - { K31, K32, K33, K34 } \ -} diff --git a/keyboards/bm16a/config.h b/keyboards/bm16a/config.h deleted file mode 100644 index fc0405475c2..00000000000 --- a/keyboards/bm16a/config.h +++ /dev/null @@ -1,246 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x424D -#define DEVICE_VER 0x0001 -#define MANUFACTURER KPrepublic -#define PRODUCT bm16a -#define DESCRIPTION KPrepublic bm16a - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D5, D1, D2} -#define MATRIX_COL_PINS { D6, D4, D7, B4} -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -#define BACKLIGHT_PIN B6 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -#define RGB_DI_PIN E2 -#define RGBLED_NUM 4 -#define RGBLIGHT_ANIMATIONS -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/bm16a/info.json b/keyboards/bm16a/info.json deleted file mode 100644 index 4f87c5ae1d2..00000000000 --- a/keyboards/bm16a/info.json +++ /dev/null @@ -1,30 +0,0 @@ -{ - "keyboard_name": "bm16a", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] - } - } - } \ No newline at end of file diff --git a/keyboards/bm16a/keymaps/default/config.h b/keyboards/bm16a/keymaps/default/config.h deleted file mode 100644 index 08c234aee2b..00000000000 --- a/keyboards/bm16a/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/bm16a/keymaps/default/keymap.c b/keyboards/bm16a/keymaps/default/keymap.c deleted file mode 100644 index a0b06ee92a3..00000000000 --- a/keyboards/bm16a/keymaps/default/keymap.c +++ /dev/null @@ -1,73 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -enum layers { - _BASE = 0, - _FN1, - _FN2, -}; - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BASE] = LAYOUT_ortho_4x4( - KC_PGUP, KC_HOME, KC_UP, KC_END , \ - KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \ - MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \ - MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \ - ), - [_FN1] = LAYOUT_ortho_4x4( - KC_ESC, KC_P7, KC_P8, KC_P9, \ - KC_TAB, KC_P4, KC_P5, KC_P6, \ - KC_ENT, KC_P1, KC_P2, KC_P3, \ - _______, KC_P0, KC_P0, KC_DOT \ - ), - [_FN2] = LAYOUT_ortho_4x4( - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ - _______, _______, _______, RESET, \ - BL_STEP, _______, QMKBEST, QMKURL \ - ) - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} diff --git a/keyboards/bm16a/keymaps/default/readme.md b/keyboards/bm16a/keymaps/default/readme.md deleted file mode 100644 index f356f2cca05..00000000000 --- a/keyboards/bm16a/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for bm16a \ No newline at end of file diff --git a/keyboards/bm16a/readme.md b/keyboards/bm16a/readme.md deleted file mode 100644 index 8d43b7014d0..00000000000 --- a/keyboards/bm16a/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# bm16a - -![bm16a](https://ae01.alicdn.com/kf/HTB1RRRQaZfrK1RjSszcq6xGGFXaY.jpg) - -A 16 key macropad, with USB C, RGB underglow and backlight. - -Keyboard Maintainer: QMK Community -Hardware Supported: The PCBs, controllers supported -Hardware Availability: [KPrepublic](https://kprepublic.com/products/bm16a-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx); [AliExpress](https://www.aliexpress.com/store/product/bm16a-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom/3034003_32970629907.html) - -Make example for this keyboard (after setting up your build environment): - - make bm16a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bm16a/rules.mk b/keyboards/bm16a/rules.mk deleted file mode 100644 index 013dac3c90a..00000000000 --- a/keyboards/bm16a/rules.mk +++ /dev/null @@ -1,82 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = ortho_4x4 diff --git a/keyboards/bm16s/bm16s.h b/keyboards/bm16s/bm16s.h deleted file mode 100755 index 9aca8c0e373..00000000000 --- a/keyboards/bm16s/bm16s.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 } \ -} diff --git a/keyboards/bm16s/config.h b/keyboards/bm16s/config.h deleted file mode 100755 index 379e59bd9d8..00000000000 --- a/keyboards/bm16s/config.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER KPrepublic -#define PRODUCT bm16s -#define DESCRIPTION KPrepublic bm16s - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { D1, D0, D3, D2 } -#define MATRIX_COL_PINS { F7, F6, D4, D6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ - -#ifdef BACKLIGHT_PIN - #define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN - #define RGBLIGHT_ANIMATIONS - #define RGBLED_NUM 16 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/bm16s/info.json b/keyboards/bm16s/info.json deleted file mode 100644 index 706453561e7..00000000000 --- a/keyboards/bm16s/info.json +++ /dev/null @@ -1,30 +0,0 @@ -{ - "keyboard_name": "bm16s", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] - } - } - } \ No newline at end of file diff --git a/keyboards/bm16s/keymaps/default/keymap.c b/keyboards/bm16s/keymaps/default/keymap.c deleted file mode 100755 index 9dd697a0d97..00000000000 --- a/keyboards/bm16s/keymaps/default/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_ortho_4x4( - KC_KP_7, KC_KP_8, KC_KP_9, MO(1), \ - KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \ - KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT \ - ), - [1] = LAYOUT_ortho_4x4( - RESET, BL_STEP, _______, KC_VOLU, \ - BL_TOGG, BL_DEC, BL_INC, KC_VOLD, \ - RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \ - RGB_SAI, RGB_SAD, RGB_HUD, _______ \ - ), -}; \ No newline at end of file diff --git a/keyboards/bm16s/keymaps/media/keymap.c b/keyboards/bm16s/keymaps/media/keymap.c deleted file mode 100755 index 082879320a2..00000000000 --- a/keyboards/bm16s/keymaps/media/keymap.c +++ /dev/null @@ -1,20 +0,0 @@ -#include QMK_KEYBOARD_H - -#define RGB_BRU RGB_VAI -#define RGB_BRD RGB_VAD - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_ortho_4x4( - KC_BRIU, _______, _______, KC_VOLU, \ - KC_BRID, _______, _______, KC_VOLD, \ - _______, _______, _______, KC_MUTE, \ - KC_MPRV, KC_MPLY, KC_MNXT, MO(1) \ - ), - [1] = LAYOUT_ortho_4x4( - RESET, _______, _______, _______, \ - RGB_SPD, RGB_BRU, RGB_SPI, _______, \ - RGB_RMOD, RGB_BRD, RGB_MOD, _______, \ - RGB_TOG, _______, _______, _______ \ - ), -}; \ No newline at end of file diff --git a/keyboards/bm16s/readme.md b/keyboards/bm16s/readme.md deleted file mode 100644 index 097a3800803..00000000000 --- a/keyboards/bm16s/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# bm16s - -A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches. - -Keyboard Maintainer: QMK Community -Hardware Supported: The PCBs, controllers supported -Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169) - -Make example for this keyboard (after setting up your build environment): - - make bm16s:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bm16s/rules.mk b/keyboards/bm16s/rules.mk deleted file mode 100755 index f4f1dfd639b..00000000000 --- a/keyboards/bm16s/rules.mk +++ /dev/null @@ -1,72 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes - -LAYOUTS = ortho_4x4 \ No newline at end of file diff --git a/keyboards/boardwalk/boardwalk.h b/keyboards/boardwalk/boardwalk.h deleted file mode 100644 index 580a320c1f9..00000000000 --- a/keyboards/boardwalk/boardwalk.h +++ /dev/null @@ -1,78 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_5x14( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413 } \ -} - -#define LAYOUT_ortho_hhkb( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \ - k41, k42, k43, k44, k45, k47, k49, k410, k411, k412 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \ - { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, KC_NO, k49, k410, k411, k412, KC_NO } \ -} - -#define LAYOUT_ortho_7u( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \ - k41, k42, k46, k411, k412 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \ - { KC_NO, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k411, k412, KC_NO } \ -} - -#define LAYOUT_2u_arrow( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \ - k40, k41, k42, k43, k44, k46, k48, k49, k410, k411, k412, k413 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \ - { k40, k41, k42, k43, k44, KC_NO, k46, KC_NO, k48, k49, k410, k411, k412, k413 } \ -} - -#define LAYOUT_625u_arrow( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \ - k40, k41, k42, k45, k49, k410, k411, k412, k413 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k410, k411, k412, k413 } \ -} diff --git a/keyboards/boardwalk/config.h b/keyboards/boardwalk/config.h deleted file mode 100644 index 7747502083c..00000000000 --- a/keyboards/boardwalk/config.h +++ /dev/null @@ -1,84 +0,0 @@ -/* -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCDCD -#define PRODUCT_ID 0x5337 -#define DEVICE_VER 0x0001 -#define MANUFACTURER shens -#define PRODUCT Boardwalk -#define DESCRIPTION QMK keyboard firmware for Boardwalk - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } -#define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN F5 -// #define BACKLIGHT_LEVELS 6 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -// ws2812 options -#define RGB_DI_PIN B7 // pin the DI on the ws2812 is hooked-up to -#define RGBLIGHT_ANIMATIONS // run RGB animations -#define RGBLED_NUM 14 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/boardwalk/info.json b/keyboards/boardwalk/info.json deleted file mode 100644 index a287f31a44e..00000000000 --- a/keyboards/boardwalk/info.json +++ /dev/null @@ -1,359 +0,0 @@ -{ - "keyboard_name": "Boardwalk", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_ortho_5x14": { - "layout": [ - {"label":"k00", "x":0, "y":0, "w":1.5}, - {"label":"k01", "x":1.5, "y":0}, - {"label":"k02", "x":2.5, "y":0}, - {"label":"k03", "x":3.5, "y":0}, - {"label":"k04", "x":4.5, "y":0}, - {"label":"k05", "x":5.5, "y":0}, - {"label":"k06", "x":6.5, "y":0}, - {"label":"k07", "x":7.5, "y":0}, - {"label":"k08", "x":8.5, "y":0}, - {"label":"k09", "x":9.5, "y":0}, - {"label":"k010", "x":10.5, "y":0}, - {"label":"k011", "x":11.5, "y":0}, - {"label":"k012", "x":12.5, "y":0}, - {"label":"k013", "x":13.5, "y":0, "w":1.5}, - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k110", "x":10.5, "y":1}, - {"label":"k111", "x":11.5, "y":1}, - {"label":"k112", "x":12.5, "y":1}, - {"label":"k113", "x":13.5, "y":1, "w":1.5}, - {"label":"k20", "x":0, "y":2, "w":1.5}, - {"label":"k21", "x":1.5, "y":2}, - {"label":"k22", "x":2.5, "y":2}, - {"label":"k23", "x":3.5, "y":2}, - {"label":"k24", "x":4.5, "y":2}, - {"label":"k25", "x":5.5, "y":2}, - {"label":"k26", "x":6.5, "y":2}, - {"label":"k27", "x":7.5, "y":2}, - {"label":"k28", "x":8.5, "y":2}, - {"label":"k29", "x":9.5, "y":2}, - {"label":"k210", "x":10.5, "y":2}, - {"label":"k211", "x":11.5, "y":2}, - {"label":"k212", "x":12.5, "y":2}, - {"label":"k213", "x":13.5, "y":2, "w":1.5}, - {"label":"k30", "x":0, "y":3, "w":1.5}, - {"label":"k31", "x":1.5, "y":3}, - {"label":"k32", "x":2.5, "y":3}, - {"label":"k33", "x":3.5, "y":3}, - {"label":"k34", "x":4.5, "y":3}, - {"label":"k35", "x":5.5, "y":3}, - {"label":"k36", "x":6.5, "y":3}, - {"label":"k37", "x":7.5, "y":3}, - {"label":"k38", "x":8.5, "y":3}, - {"label":"k39", "x":9.5, "y":3}, - {"label":"k310", "x":10.5, "y":3}, - {"label":"k311", "x":11.5, "y":3}, - {"label":"k312", "x":12.5, "y":3}, - {"label":"k313", "x":13.5, "y":3, "w":1.5}, - {"label":"k40", "x":0, "y":4, "w":1.5}, - {"label":"k41", "x":1.5, "y":4}, - {"label":"k42", "x":2.5, "y":4}, - {"label":"k43", "x":3.5, "y":4}, - {"label":"k44", "x":4.5, "y":4}, - {"label":"k45", "x":5.5, "y":4}, - {"label":"k46", "x":6.5, "y":4}, - {"label":"k47", "x":7.5, "y":4}, - {"label":"k48", "x":8.5, "y":4}, - {"label":"k49", "x":9.5, "y":4}, - {"label":"k410", "x":10.5, "y":4}, - {"label":"k411", "x":11.5, "y":4}, - {"label":"k412", "x":12.5, "y":4}, - {"label":"k413", "x":13.5, "y":4, "w":1.5} - ] - }, - "LAYOUT_ortho_hhkb": { - "layout": [ - {"label":"k00", "x":0, "y":0, "w":1.5}, - {"label":"k01", "x":1.5, "y":0}, - {"label":"k02", "x":2.5, "y":0}, - {"label":"k03", "x":3.5, "y":0}, - {"label":"k04", "x":4.5, "y":0}, - {"label":"k05", "x":5.5, "y":0}, - {"label":"k06", "x":6.5, "y":0}, - {"label":"k07", "x":7.5, "y":0}, - {"label":"k08", "x":8.5, "y":0}, - {"label":"k09", "x":9.5, "y":0}, - {"label":"k010", "x":10.5, "y":0}, - {"label":"k011", "x":11.5, "y":0}, - {"label":"k012", "x":12.5, "y":0}, - {"label":"k013", "x":13.5, "y":0, "w":1.5}, - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k110", "x":10.5, "y":1}, - {"label":"k111", "x":11.5, "y":1}, - {"label":"k112", "x":12.5, "y":1}, - {"label":"k113", "x":13.5, "y":1, "w":1.5}, - {"label":"k20", "x":0, "y":2, "w":1.5}, - {"label":"k21", "x":1.5, "y":2}, - {"label":"k22", "x":2.5, "y":2}, - {"label":"k23", "x":3.5, "y":2}, - {"label":"k24", "x":4.5, "y":2}, - {"label":"k25", "x":5.5, "y":2}, - {"label":"k26", "x":6.5, "y":2}, - {"label":"k27", "x":7.5, "y":2}, - {"label":"k28", "x":8.5, "y":2}, - {"label":"k29", "x":9.5, "y":2}, - {"label":"k210", "x":10.5, "y":2}, - {"label":"k211", "x":11.5, "y":2}, - {"label":"k212", "x":12.5, "y":2}, - {"label":"k213", "x":13.5, "y":2, "w":1.5}, - {"label":"k30", "x":0, "y":3, "w":1.5}, - {"label":"k31", "x":1.5, "y":3}, - {"label":"k32", "x":2.5, "y":3}, - {"label":"k33", "x":3.5, "y":3}, - {"label":"k34", "x":4.5, "y":3}, - {"label":"k35", "x":5.5, "y":3}, - {"label":"k36", "x":6.5, "y":3}, - {"label":"k37", "x":7.5, "y":3}, - {"label":"k38", "x":8.5, "y":3}, - {"label":"k39", "x":9.5, "y":3}, - {"label":"k310", "x":10.5, "y":3}, - {"label":"k311", "x":11.5, "y":3}, - {"label":"k312", "x":12.5, "y":3}, - {"label":"k313", "x":13.5, "y":3, "w":1.5}, - {"label":"k41", "x":1.5, "y":4}, - {"label":"k42", "x":2.5, "y":4}, - {"label":"k43", "x":3.5, "y":4}, - {"label":"k44", "x":4.5, "y":4}, - {"label":"k45", "x":5.5, "y":4, "w":2}, - {"label":"k47", "x":7.5, "y":4, "w":2}, - {"label":"k49", "x":9.5, "y":4}, - {"label":"k410", "x":10.5, "y":4}, - {"label":"k411", "x":11.5, "y":4}, - {"label":"k412", "x":12.5, "y":4} - ] - }, - "LAYOUT_ortho_7u": { - "layout": [ - {"label":"k00", "x":0, "y":0, "w":1.5}, - {"label":"k01", "x":1.5, "y":0}, - {"label":"k02", "x":2.5, "y":0}, - {"label":"k03", "x":3.5, "y":0}, - {"label":"k04", "x":4.5, "y":0}, - {"label":"k05", "x":5.5, "y":0}, - {"label":"k06", "x":6.5, "y":0}, - {"label":"k07", "x":7.5, "y":0}, - {"label":"k08", "x":8.5, "y":0}, - {"label":"k09", "x":9.5, "y":0}, - {"label":"k010", "x":10.5, "y":0}, - {"label":"k011", "x":11.5, "y":0}, - {"label":"k012", "x":12.5, "y":0}, - {"label":"k013", "x":13.5, "y":0, "w":1.5}, - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k110", "x":10.5, "y":1}, - {"label":"k111", "x":11.5, "y":1}, - {"label":"k112", "x":12.5, "y":1}, - {"label":"k113", "x":13.5, "y":1, "w":1.5}, - {"label":"k20", "x":0, "y":2, "w":1.5}, - {"label":"k21", "x":1.5, "y":2}, - {"label":"k22", "x":2.5, "y":2}, - {"label":"k23", "x":3.5, "y":2}, - {"label":"k24", "x":4.5, "y":2}, - {"label":"k25", "x":5.5, "y":2}, - {"label":"k26", "x":6.5, "y":2}, - {"label":"k27", "x":7.5, "y":2}, - {"label":"k28", "x":8.5, "y":2}, - {"label":"k29", "x":9.5, "y":2}, - {"label":"k210", "x":10.5, "y":2}, - {"label":"k211", "x":11.5, "y":2}, - {"label":"k212", "x":12.5, "y":2}, - {"label":"k213", "x":13.5, "y":2, "w":1.5}, - {"label":"k30", "x":0, "y":3, "w":1.5}, - {"label":"k31", "x":1.5, "y":3}, - {"label":"k32", "x":2.5, "y":3}, - {"label":"k33", "x":3.5, "y":3}, - {"label":"k34", "x":4.5, "y":3}, - {"label":"k35", "x":5.5, "y":3}, - {"label":"k36", "x":6.5, "y":3}, - {"label":"k37", "x":7.5, "y":3}, - {"label":"k38", "x":8.5, "y":3}, - {"label":"k39", "x":9.5, "y":3}, - {"label":"k310", "x":10.5, "y":3}, - {"label":"k311", "x":11.5, "y":3}, - {"label":"k312", "x":12.5, "y":3}, - {"label":"k313", "x":13.5, "y":3, "w":1.5}, - {"label":"k41", "x":1.5, "y":4}, - {"label":"k42", "x":2.5, "y":4, "w":1.5}, - {"label":"k46", "x":4, "y":4, "w":7}, - {"label":"k411", "x":11, "y":4, "w":1.5}, - {"label":"k412", "x":12.5, "y":4} - ] - }, - "LAYOUT_2u_arrow": { - "layout": [ - {"label":"k00", "x":0, "y":0, "w":1.5}, - {"label":"k01", "x":1.5, "y":0}, - {"label":"k02", "x":2.5, "y":0}, - {"label":"k03", "x":3.5, "y":0}, - {"label":"k04", "x":4.5, "y":0}, - {"label":"k05", "x":5.5, "y":0}, - {"label":"k06", "x":6.5, "y":0}, - {"label":"k07", "x":7.5, "y":0}, - {"label":"k08", "x":8.5, "y":0}, - {"label":"k09", "x":9.5, "y":0}, - {"label":"k010", "x":10.5, "y":0}, - {"label":"k011", "x":11.5, "y":0}, - {"label":"k012", "x":12.5, "y":0}, - {"label":"k013", "x":13.5, "y":0, "w":1.5}, - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k110", "x":10.5, "y":1}, - {"label":"k111", "x":11.5, "y":1}, - {"label":"k112", "x":12.5, "y":1}, - {"label":"k113", "x":13.5, "y":1, "w":1.5}, - {"label":"k20", "x":0, "y":2, "w":1.5}, - {"label":"k21", "x":1.5, "y":2}, - {"label":"k22", "x":2.5, "y":2}, - {"label":"k23", "x":3.5, "y":2}, - {"label":"k24", "x":4.5, "y":2}, - {"label":"k25", "x":5.5, "y":2}, - {"label":"k26", "x":6.5, "y":2}, - {"label":"k27", "x":7.5, "y":2}, - {"label":"k28", "x":8.5, "y":2}, - {"label":"k29", "x":9.5, "y":2}, - {"label":"k210", "x":10.5, "y":2}, - {"label":"k211", "x":11.5, "y":2}, - {"label":"k212", "x":12.5, "y":2, "w":1.5}, - {"label":"k213", "x":14, "y":2}, - {"label":"k30", "x":0, "y":3, "w":1.5}, - {"label":"k31", "x":1.5, "y":3}, - {"label":"k32", "x":2.5, "y":3}, - {"label":"k33", "x":3.5, "y":3}, - {"label":"k34", "x":4.5, "y":3}, - {"label":"k35", "x":5.5, "y":3}, - {"label":"k36", "x":6.5, "y":3}, - {"label":"k37", "x":7.5, "y":3}, - {"label":"k38", "x":8.5, "y":3}, - {"label":"k39", "x":9.5, "y":3}, - {"label":"k310", "x":10.5, "y":3}, - {"label":"k311", "x":11.5, "y":3, "w":1.5}, - {"label":"k312", "x":13, "y":3}, - {"label":"k313", "x":14, "y":3}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4}, - {"label":"k43", "x":3.5, "y":4}, - {"label":"k44", "x":4.5, "y":4, "w":2}, - {"label":"k46", "x":6.5, "y":4, "w":2}, - {"label":"k48", "x":8.5, "y":4}, - {"label":"k49", "x":9.5, "y":4, "w":1.25}, - {"label":"k410", "x":10.75, "y":4, "w":1.25}, - {"label":"k411", "x":12, "y":4}, - {"label":"k412", "x":13, "y":4}, - {"label":"k413", "x":14, "y":4} - ] - }, - "LAYOUT_625u_arrow": { - "layout": [ - {"label":"k00", "x":0, "y":0, "w":1.5}, - {"label":"k01", "x":1.5, "y":0}, - {"label":"k02", "x":2.5, "y":0}, - {"label":"k03", "x":3.5, "y":0}, - {"label":"k04", "x":4.5, "y":0}, - {"label":"k05", "x":5.5, "y":0}, - {"label":"k06", "x":6.5, "y":0}, - {"label":"k07", "x":7.5, "y":0}, - {"label":"k08", "x":8.5, "y":0}, - {"label":"k09", "x":9.5, "y":0}, - {"label":"k010", "x":10.5, "y":0}, - {"label":"k011", "x":11.5, "y":0}, - {"label":"k012", "x":12.5, "y":0}, - {"label":"k013", "x":13.5, "y":0, "w":1.5}, - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k110", "x":10.5, "y":1}, - {"label":"k111", "x":11.5, "y":1}, - {"label":"k112", "x":12.5, "y":1}, - {"label":"k113", "x":13.5, "y":1, "w":1.5}, - {"label":"k20", "x":0, "y":2, "w":1.5}, - {"label":"k21", "x":1.5, "y":2}, - {"label":"k22", "x":2.5, "y":2}, - {"label":"k23", "x":3.5, "y":2}, - {"label":"k24", "x":4.5, "y":2}, - {"label":"k25", "x":5.5, "y":2}, - {"label":"k26", "x":6.5, "y":2}, - {"label":"k27", "x":7.5, "y":2}, - {"label":"k28", "x":8.5, "y":2}, - {"label":"k29", "x":9.5, "y":2}, - {"label":"k210", "x":10.5, "y":2}, - {"label":"k211", "x":11.5, "y":2}, - {"label":"k212", "x":12.5, "y":2, "w":1.5}, - {"label":"k213", "x":14, "y":2}, - {"label":"k30", "x":0, "y":3, "w":1.5}, - {"label":"k31", "x":1.5, "y":3}, - {"label":"k32", "x":2.5, "y":3}, - {"label":"k33", "x":3.5, "y":3}, - {"label":"k34", "x":4.5, "y":3}, - {"label":"k35", "x":5.5, "y":3}, - {"label":"k36", "x":6.5, "y":3}, - {"label":"k37", "x":7.5, "y":3}, - {"label":"k38", "x":8.5, "y":3}, - {"label":"k39", "x":9.5, "y":3}, - {"label":"k310", "x":10.5, "y":3}, - {"label":"k311", "x":11.5, "y":3, "w":1.5}, - {"label":"k312", "x":13, "y":3}, - {"label":"k313", "x":14, "y":3}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4}, - {"label":"k45", "x":3.5, "y":4, "w":6.25}, - {"label":"k49", "x":9.75, "y":4}, - {"label":"k410", "x":10.75, "y":4, "w":1.25}, - {"label":"k411", "x":12, "y":4}, - {"label":"k412", "x":13, "y":4}, - {"label":"k413", "x":14, "y":4} - ] - } - } - } \ No newline at end of file diff --git a/keyboards/boardwalk/keymaps/brendanwr/config.h b/keyboards/boardwalk/keymaps/brendanwr/config.h deleted file mode 100644 index a2530241f47..00000000000 --- a/keyboards/boardwalk/keymaps/brendanwr/config.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once diff --git a/keyboards/boardwalk/keymaps/brendanwr/keymap.c b/keyboards/boardwalk/keymaps/brendanwr/keymap.c deleted file mode 100644 index b428651e73e..00000000000 --- a/keyboards/boardwalk/keymaps/brendanwr/keymap.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -enum layer { - _BASE, - _FN, - _BACKLIT -}; - - -#define FN MO(_FN) -#define BACKLIT MO(_BACKLIT) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* BASE - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | \ | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | LCTRL | A | S | D | F | G | H | J | K | L | ; | ' | ENTER | HOME | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT | FN | END | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | LALT | LGUI | SPACE | RGUI | RALT | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_BASE] = LAYOUT_ortho_7u( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN, KC_END, - KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT - ), - -/* FUNCTION - * .-----------------------------------------------------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | ` | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | | | | | | | | | | UP | | | DEL | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | | VOLD | VOLU | MUTE | | | | | | | LEFT | RIGHT | | PG_UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | | | | | | | | | | | DOWN | | | PG_DN | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_FN] = LAYOUT_ortho_7u( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_GRV, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, KC_DEL, - _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, KC_PGUP, - BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, KC_PGDN, - _______, _______, _______, _______, _______ - ), - -/* BACKLIT - * .-----------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | RGBTOG | RGBMOD | RGBHUI | RGBHUD | RGBSAI | RGBSAD | RGBVAI | RGBVAD | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_BACKLIT] = LAYOUT_ortho_7u( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/boardwalk/keymaps/default/config.h b/keyboards/boardwalk/keymaps/default/config.h deleted file mode 100644 index a2530241f47..00000000000 --- a/keyboards/boardwalk/keymaps/default/config.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once diff --git a/keyboards/boardwalk/keymaps/default/keymap.c b/keyboards/boardwalk/keymaps/default/keymap.c deleted file mode 100644 index fddb3da8251..00000000000 --- a/keyboards/boardwalk/keymaps/default/keymap.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -// Layer shorthand -enum layer { - _1U, - _FN, - _HHKB, - _7U, - _2UARROW, - _625UARROW, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* 1uGrid - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | - | = | 6 | 7 | 8 | 9 | 0 | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | [ | ] | Y | U | I | O | P | ' | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | CAP LK | A | S | D | F | G | HOME | PG UP | H | J | K | L | ; | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | END | PG DN | N | M | , | . | / | RSHIFT | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LGUI | FN | LALT | SPACE | SPACE | SPACE | SPACE | SPACE | SPACE | RIGHT | DOWN | UP | RIGHT | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_1U] = LAYOUT_ortho_5x14( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_QUOT, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, MO(1), KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL \ - ), - - /* HHKB - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | - | = | 6 | 7 | 8 | 9 | 0 | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | [ | ] | Y | U | I | O | P | ' | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | CAP LK | A | S | D | F | G | HOME | PG UP | H | J | K | L | ; | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | END | PG DN | N | M | , | . | / | RSHIFT | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | LCTRL | FN | LALT | LGUI | SPACE | SPACE | LEFT | DOWN | UP | RIGHT | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_HHKB] = LAYOUT_ortho_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, MO(1), KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* 7u HHKB - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | - | = | 6 | 7 | 8 | 9 | 0 | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | [ | ] | Y | U | I | O | P | ' | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | CAP LK | A | S | D | F | G | HOME | PG UP | H | J | K | L | ; | ENTER | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | END | PG DN | N | M | , | . | / | RSHIFT | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | LCTRL | LALT | SPACE | RALT | FN | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_7U] = LAYOUT_ortho_7u( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LALT, KC_SPC, KC_RALT, MO(1) \ - ), - - /* 2x2u Space with Arrows - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | CAP LK | A | S | D | F | G | H | J | K | L | ; | " | ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | SHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LGUI | FN | LALT | SPACE | SPACE | RALT | RGUI | RCTRL | LEFT | DOWN | RIGHT | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_2UARROW] = LAYOUT_2u_arrow( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_QUOT, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSLS, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, MO(1), KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - - /* 6.25u Space with Arrows - * .-----------------------------------------------------------------------------------------------------------------------------. - * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | CAP LK | A | S | D | F | G | H | J | K | L | ; | " | ENTER | PG UP | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | SHIFT | UP | PG DN | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | LCTRL | LGUI | LALT | SPACE | FN | RCTRL | LEFT | DOWN | RIGHT | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - [_625UARROW] = LAYOUT_625u_arrow( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_QUOT, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSLS, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - -/* FUNCTION - * .-----------------------------------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| - * | | | | | | | | | | | | | | | - * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------| - * | | | | | | | | | | | | | | | - * '-----------------------------------------------------------------------------------------------------------------------------' - */ - - - [_FN] = LAYOUT_ortho_5x14( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/boardwalk/keymaps/default/readme.md b/keyboards/boardwalk/keymaps/default/readme.md deleted file mode 100644 index 73cf19b06fb..00000000000 --- a/keyboards/boardwalk/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for Boardwalk diff --git a/keyboards/boardwalk/keymaps/mcallaster/keymap.c b/keyboards/boardwalk/keymaps/mcallaster/keymap.c deleted file mode 100644 index 9ec6f926711..00000000000 --- a/keyboards/boardwalk/keymaps/mcallaster/keymap.c +++ /dev/null @@ -1,54 +0,0 @@ -#include QMK_KEYBOARD_H - -// Layer shorthand -enum layer { - _BASE, - _LOWER, - _RAISE, - _FN -}; - -#define LOWER MO(1) -#define RAISE MO(2) -#define FN MO(3) - -// Mac sleep -#define __SLEEP S(LCTL(KC_POWER)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_ortho_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_SLCK, KC_PSCR, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, KC_PGUP, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_END, KC_PGDN, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_INS, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - KC_CAPS, KC_LALT, KC_LGUI, RAISE, KC_SPC, KC_SPC, LOWER, KC_RGUI, KC_RALT, KC_RCTL - ), - - [_LOWER] = LAYOUT_ortho_hhkb( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_PAUS, KC_NLCK, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, \ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [_RAISE] = LAYOUT_ortho_hhkb( - _______, KC_F11, KC_F12, _______, _______, _______, KC_PAUS, KC_NLCK, _______, _______, _______, _______, _______, _______, \ - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [_FN] = LAYOUT_ortho_hhkb( - __SLEEP, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, \ - _______, RESET, _______, KC_MPRV, KC_MNXT, _______, RGB_SAI, RGB_HUI, _______, _______, _______, _______, _______, _______, \ - _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, _______, RGB_SAD, RGB_HUD, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, \ - _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _LOWER, _RAISE, _FN); -} diff --git a/keyboards/boardwalk/keymaps/nchristus/config.h b/keyboards/boardwalk/keymaps/nchristus/config.h deleted file mode 100644 index a2530241f47..00000000000 --- a/keyboards/boardwalk/keymaps/nchristus/config.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once diff --git a/keyboards/boardwalk/keymaps/nchristus/keymap.c b/keyboards/boardwalk/keymaps/nchristus/keymap.c deleted file mode 100644 index 57b6736cbb5..00000000000 --- a/keyboards/boardwalk/keymaps/nchristus/keymap.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -// Layer shorthand -#define _QW 0 - -#define LOWER LT(1, KC_SPC) -#define RAISE LT(2, KC_ENT) - -#define CTRLESC CTL_T(KC_ESC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _QWE: Base Layer (Default Layer) */ - [_QW] = LAYOUT_ortho_hhkb( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - CTRLESC, KC_A, KC_S, KC_D, KC_F, KC_G, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, _______, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - MO(3), KC_LCTL, KC_LALT, KC_LGUI, RAISE, LOWER, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Keymap LOWER: Lower Layer */ - [1] = LAYOUT_ortho_hhkb( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______ - ), - - /* Keymap RAISE: Raise Layer */ - [2] = LAYOUT_ortho_hhkb( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______ - ), - - /* Keymap _FL: Function Layer */ - [3] = LAYOUT_ortho_hhkb( - RESET, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/boardwalk/keymaps/nchristus/readme.md b/keyboards/boardwalk/keymaps/nchristus/readme.md deleted file mode 100644 index 73cf19b06fb..00000000000 --- a/keyboards/boardwalk/keymaps/nchristus/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for Boardwalk diff --git a/keyboards/boardwalk/keymaps/nchristus/rules.mk b/keyboards/boardwalk/keymaps/nchristus/rules.mk deleted file mode 100644 index b07a6475be5..00000000000 --- a/keyboards/boardwalk/keymaps/nchristus/rules.mk +++ /dev/null @@ -1,14 +0,0 @@ -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -RGBLIGHT_ENABLE = yes diff --git a/keyboards/boardwalk/readme.md b/keyboards/boardwalk/readme.md deleted file mode 100644 index 932e7e9d6c4..00000000000 --- a/keyboards/boardwalk/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Boardwalk - -![Boardwalk](https://i.imgur.com/CQj3b9E.jpg) - -The Boardwalk is a 60% ortholinear keyboard, designed around Ergodox keycap sets and to fit into many standard 60% cases. The project was inspired by OLKB’s Atomic keyboard, which used larger 2u mods, but u/shensmobile -decided to switch to 1.5u keys so that Ergodox sets would provide excellent compatibility. The rest of the board can be covered using standard key sizes from 60% sets. - -Keyboard Maintainer: QMK Community -Hardware Supported: Boardwalk Ortholinear PCB -Hardware Availability: [panc.co](https://www.panc.co/boardwalk-group-buy.html) - -Make example for this keyboard (after setting up your build environment): - - make boardwalk:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/boardwalk/rules.mk b/keyboards/boardwalk/rules.mk deleted file mode 100644 index 0a02497bc3b..00000000000 --- a/keyboards/boardwalk/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -BOOTLOADER = atmel-dfu - -# QMK Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -LAYOUTS = ortho_5x14 diff --git a/keyboards/boston_meetup/2019/2019.c b/keyboards/boston_meetup/2019/2019.c deleted file mode 100644 index 933c14dee4f..00000000000 --- a/keyboards/boston_meetup/2019/2019.c +++ /dev/null @@ -1,215 +0,0 @@ -/* Copyright 2019 ishtob - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "2019.h" -#include "qwiic.h" -#include "action_layer.h" -#include "haptic.h" - -#ifdef RGB_MATRIX_ENABLE -#include "rgb_matrix.h" - -led_config_t g_led_config = { { - { 5, NO_LED, NO_LED, 0 }, - { NO_LED, NO_LED, NO_LED, NO_LED }, - { 4, NO_LED, NO_LED, 1 }, - { 3, NO_LED, NO_LED, 2 } -}, { - { 188, 16 }, { 187, 48 }, { 149, 64 }, { 112, 64 }, { 37, 48 }, { 38, 16 } -}, { - 4, 4, 4, 4, 4, 4 -} }; -#endif - -uint8_t *o_fb; - -uint16_t counterst = 0; - - - -#ifdef QWIIC_MICRO_OLED_ENABLE - -/* screen off after this many milliseconds */ -#include "timer.h" -#define ScreenOffInterval 60000 /* milliseconds */ -static uint16_t last_flush; - -volatile uint8_t led_numlock = false; -volatile uint8_t led_capslock = false; -volatile uint8_t led_scrolllock = false; - -static uint8_t layer; -static bool queue_for_send = false; -static uint8_t encoder_value = 32; - -__attribute__ ((weak)) -void draw_ui(void) { - clear_buffer(); - last_flush = timer_read(); - send_command(DISPLAYON); - -/* Boston MK title is 55 x 10 pixels */ -#define NAME_X 0 -#define NAME_Y 0 - - draw_string(NAME_X + 1, NAME_Y + 2, "BOSTON MK", PIXEL_ON, NORM, 0); - -/* Layer indicator is 41 x 10 pixels */ -#define LAYER_INDICATOR_X 60 -#define LAYER_INDICATOR_Y 0 - - draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0); - draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM); - draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0); - -/* Matrix display is 12 x 12 pixels */ -#define MATRIX_DISPLAY_X 8 -#define MATRIX_DISPLAY_Y 16 - - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - for (uint8_t y = 0; y < MATRIX_COLS; y++) { - draw_pixel(MATRIX_DISPLAY_X + y + y + 2, MATRIX_DISPLAY_Y + x + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); - draw_pixel(MATRIX_DISPLAY_X + y + y + 3, MATRIX_DISPLAY_Y + x + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); - draw_pixel(MATRIX_DISPLAY_X + y + y + 2, MATRIX_DISPLAY_Y + x + x + 3,(matrix_get_row(x) & (1 << y)) > 0, NORM); - draw_pixel(MATRIX_DISPLAY_X + y + y + 3, MATRIX_DISPLAY_Y + x + x + 3,(matrix_get_row(x) & (1 << y)) > 0, NORM); - - } - } - draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 12, 12, PIXEL_ON, NORM); - /* hadron oled location on thumbnail */ - draw_rect_filled_soft(MATRIX_DISPLAY_X + 5, MATRIX_DISPLAY_Y + 2, 6, 2, PIXEL_ON, NORM); -/* - draw_rect_soft(0, 13, 64, 6, PIXEL_ON, NORM); - draw_line_vert(encoder_value, 13, 6, PIXEL_ON, NORM); - -*/ - -/* Mod display is 41 x 16 pixels */ -#define MOD_DISPLAY_X 60 -#define MOD_DISPLAY_Y 20 - - uint8_t mods = get_mods(); - if (mods & MOD_LSFT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LCTL) { - draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LALT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LGUI) { - draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); - } - -/* Lock display is 23 x 32 */ -#define LOCK_DISPLAY_X 104 -#define LOCK_DISPLAY_Y 0 - - if (led_numlock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_OFF, NORM, 0); - } else if (led_numlock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_ON, NORM, 0); - } - if (led_capslock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_ON, NORM, 0); - } - - if (led_scrolllock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 22, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_OFF, NORM, 0); - } else if (led_scrolllock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_ON, NORM, 0); - } - send_buffer(); -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - if (led_numlock == false){led_numlock = true;} - } else { - if (led_numlock == true){led_numlock = false;} - } - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - if (led_capslock == false){led_capslock = true;} - } else { - if (led_capslock == true){led_capslock = false;} - } - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - if (led_scrolllock == false){led_scrolllock = true;} - } else { - if (led_scrolllock == true){led_scrolllock = false;} - } -} - -uint32_t layer_state_set_kb(uint32_t state) { - state = layer_state_set_user(state); - layer = biton32(state); - queue_for_send = true; - return state; -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - queue_for_send = true; - return process_record_user(keycode, record); -} - -void encoder_update_kb(uint8_t index, bool clockwise) { - encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; - queue_for_send = true; -} - -#endif - -void matrix_init_kb(void) { - queue_for_send = true; - matrix_init_user(); -} - -void matrix_scan_kb(void) { -if (queue_for_send) { -#ifdef QWIIC_MICRO_OLED_ENABLE - draw_ui(); -#endif - queue_for_send = false; - } -#ifdef QWIIC_MICRO_OLED_ENABLE - if (timer_elapsed(last_flush) > ScreenOffInterval) { - send_command(DISPLAYOFF); /* 0xAE */ - } -#endif - if (counterst == 0) { - //testPatternFB(o_fb); - } - counterst = (counterst + 1) % 1024; - //rgblight_task(); - matrix_scan_user(); -} diff --git a/keyboards/boston_meetup/2019/2019.h b/keyboards/boston_meetup/2019/2019.h deleted file mode 100644 index fbba5c3154f..00000000000 --- a/keyboards/boston_meetup/2019/2019.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 ishtob - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "boston_meetup.h" - diff --git a/keyboards/boston_meetup/2019/config.h b/keyboards/boston_meetup/2019/config.h deleted file mode 100644 index 5652816446c..00000000000 --- a/keyboards/boston_meetup/2019/config.h +++ /dev/null @@ -1,196 +0,0 @@ -#pragma once - -/* USB Device descriptor parameter */ -#define DEVICE_VER 0x07E3 - -#undef MATRIX_ROWS -#undef MATRIX_COLS -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - -#undef MATRIX_ROW_PINS -#undef MATRIX_COL_PINS - -#define MATRIX_ROW_PINS { A3, B8, B9, B1 } -#define MATRIX_COL_PINS { A7, A8, B2, B10 } - -#define NUMBER_OF_ENCODERS 1 -#define ENCODERS_PAD_A { B13 } -#define ENCODERS_PAD_B { B14 } - -//Audio -#undef AUDIO_VOICES -#undef C6_AUDIO - -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(ONE_UP_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - -#define AUDIO_CLICKY - /* to enable clicky on startup */ - //#define AUDIO_CLICKY_ON -#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f -#endif - -//configure qwiic micro_oled driver for the 128x32 oled -#ifdef QWIIC_MICRO_OLED_ENABLE - -#undef I2C_ADDRESS_SA0_1 -#define I2C_ADDRESS_SA0_1 0b0111100 -#define LCDWIDTH 128 -#define LCDHEIGHT 32 -#define micro_oled_rotate_180 - -#endif -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - -/* Haptic Driver initialization settings - * Feedback Control Settings */ -#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ -#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ -#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ - -/* default 3V ERM vibration motor voltage and library*/ -#if FB_ERM_LRA == 0 -#define RATED_VOLTAGE 3 -#define V_RMS 2.3 -#define V_PEAK 3.30 -/* Library Selection */ -#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ - -/* default 2V LRA voltage and library */ -#elif FB_ERM_LRA == 1 -#define RATED_VOLTAGE 2 -#define V_RMS 2.0 -#define V_PEAK 2.85 -#define F_LRA 200 -/* Library Selection */ -#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ - -#endif - -/* Control 1 register settings */ -#define DRIVE_TIME 25 -#define AC_COUPLE 0 -#define STARTUP_BOOST 1 - -/* Control 2 Settings */ -#define BIDIR_INPUT 1 -#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ -#define SAMPLE_TIME 3 -#define BLANKING_TIME 1 -#define IDISS_TIME 1 - -/* Control 3 settings */ -#define NG_THRESH 2 -#define ERM_OPEN_LOOP 1 -#define SUPPLY_COMP_DIS 0 -#define DATA_FORMAT_RTO 0 -#define LRA_DRIVE_MODE 0 -#define N_PWM_ANALOG 0 -#define LRA_OPEN_LOOP 0 -/* Control 4 settings */ -#define ZC_DET_TIME 0 -#define AUTO_CAL_TIME 3 - -#define RGBLIGHT_ANIMATIONS - -#define RGBLED_NUM 10 -#define RGB_DI_PIN B5 -#define DRIVER_LED_TOTAL RGBLED_NUM - -#define RGB_MATRIX_KEYPRESSES - -#define SOLENOID_PIN A14 - diff --git a/keyboards/boston_meetup/2019/info.json b/keyboards/boston_meetup/2019/info.json deleted file mode 100644 index 15ab72935c2..00000000000 --- a/keyboards/boston_meetup/2019/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Boston Meetup 2019", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT": { - "key_count": 13, - "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K10", "x":0, "y":1}, {"label":"K11", "x":1, "y":1}, {"label":"K12", "x":2, "y":1}, {"label":"K13", "x":3, "y":1}, {"label":"K20", "x":0, "y":2}, {"label":"K21", "x":1, "y":2}, {"label":"K22", "x":2, "y":2}, {"label":"K23", "x":3, "y":2}, {"label":"K30", "x":0, "y":3}, {"label":"K31", "x":1, "y":3}, {"label":"K32", "x":2, "y":3}, {"label":"K33", "x":3, "y":3}] } - } -} diff --git a/keyboards/boston_meetup/2019/keymaps/default/keymap.c b/keyboards/boston_meetup/2019/keymaps/default/keymap.c deleted file mode 100644 index 52d67273e37..00000000000 --- a/keyboards/boston_meetup/2019/keymaps/default/keymap.c +++ /dev/null @@ -1,166 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -enum custom_layers { - _BASE, - _LOWER, - _RAISE, - _ADJUST -}; - -enum custom_keycodes { - BASE = SAFE_RANGE, - LOWER, - RAISE, - KC_DEMOMACRO -}; - -// Custom macros -#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl -#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl -#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -// Requires KC_TRNS/_______ for the trigger key in the destination layer -#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor -#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise -#define DEMOMACRO KC_DEMOMACRO // Sample for macros - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Base - * ,------. - * | Esc | - * |------+------+-------------. - * | : | 7 | 8 | 9 | - * |------+------+------+------| - * | RAISE| 4 | 5 | 6 | - * |------+------+------+------| - * | LOWER| 1 | 2 | 3 | - * `---------------------------' - */ -[_BASE] = LAYOUT( - KC_ESC, - KC_COLN, KC_P7, KC_P8, KC_P9, - RAISE, KC_P4, KC_P5, KC_P6, - LOWER, KC_P1, KC_P2, KC_P3 -), - -/* Lower - * ,------. - * | Nmlk | - * |------+------+-------------. - * | : | / | * | - | - * |------+------+------+------| - * | | | = | + | - * |------+------+------+------| - * | | 0 | . | ENT | - * `---------------------------' - */ -[_LOWER] = LAYOUT( - KC_NLCK, - KC_COLN, KC_PSLS, KC_PAST, KC_PMNS, - _______, XXXXXXX, KC_EQL, KC_PPLS, - _______, KC_P0, KC_PDOT, KC_PENT -), - -/* Raise - * ,------. - * | Esc | - * |------+------+-------------. - * |RGB TG|RGB M+|RGB M-| | - * |------+------+------+------| - * | |RGB H+|RGB S+|RGB V+| - * |------+------+------+------| - * | ` |RGB H-|RGB S-|RGB V-| - * `---------------------------' - */ -[_RAISE] = LAYOUT( - KC_NLCK, - RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, - _______, RGB_HUI, RGB_SAI, RGB_VAI, - _______, RGB_HUD, RGB_SAD, RGB_VAD - -), - -/* Adjust - * ,------. - * | DFU | - * |------+------+-------------. - * |HPT TG|HPT FB|HPT RS| BKSP | - * |------+------+------+------| - * | |HPT M+| | | - * |------+------+------+------| - * | |HPT M-|Clk TG| Del | - * `---------------------------' - */ -[_ADJUST] = LAYOUT( - RESET, - HPT_TOG, HPT_FBK, HPT_RST, KC_BSPC, - _______, HPT_MODI, XXXXXXX, XXXXXXX, - _______, HPT_MODD, CK_TOGG, KC_DEL -), - - -}; - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); -} - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_DEMOMACRO: - if (record->event.pressed) { - // when keycode KC_DEMOMACRO is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode KC_DEMOMACRO is released - } - break; - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - } - return true; -} - -bool music_mask_user(uint16_t keycode) { - switch (keycode) { - case RAISE: - case LOWER: - return false; - default: - return true; - } -} - -void matrix_init_user(void) { -} - - -void matrix_scan_user(void) { -} - diff --git a/keyboards/boston_meetup/2019/keymaps/default/readme.md b/keyboards/boston_meetup/2019/keymaps/default/readme.md deleted file mode 100644 index 75f80b51914..00000000000 --- a/keyboards/boston_meetup/2019/keymaps/default/readme.md +++ /dev/null @@ -1,51 +0,0 @@ -# The Default Boston Meetup 2019 board Layout - -Keymap: -``` -Base -,------. -| Esc | -|------+------+-------------. -| : | 7 | 8 | 9 | -|------+------+------+------| -| RAISE| 4 | 5 | 6 | -|------+------+------+------| -| LOWER| 1 | 2 | 3 | -`---------------------------' - -Lower -,------. -| Nmlk | -|------+------+-------------. -| : | / | * | - | -|------+------+------+------| -| | | = | + | -|------+------+------+------| -| | 0 | . | ENT | -`---------------------------' - -Raise -,------. -| Esc | -|------+------+-------------. -|RGB TG|RGB M+|RGB M-| | -|------+------+------+------| -| |RGB H+|RGB S+|RGB V+| -|------+------+------+------| -| |RGB H-|RGB S-|RGB V-| -`---------------------------' - -Adjust: -,------. -| DFU | -|------+------+-------------. -|HPT TG|HPT FB|HPT RS| BKSP | -|------+------+------+------| -| |HPT M+| | | -|------+------+------+------| -| |HPT M-|Clk TG| Del | -`---------------------------' - -``` - -RGB still work in progress \ No newline at end of file diff --git a/keyboards/boston_meetup/2019/keymaps/readme.md b/keyboards/boston_meetup/2019/keymaps/readme.md deleted file mode 100644 index c10a49f7d03..00000000000 --- a/keyboards/boston_meetup/2019/keymaps/readme.md +++ /dev/null @@ -1,22 +0,0 @@ -# How to add your own keymap - -Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: - - _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] - -\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements - -and contain the following files: - -* `keymap.c` -* `readme.md` *recommended* -* `config.h` *optional*, found automatically when compiling -* `Makefile` *optional*, found automatically when compling - -When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: - - * **folder_name** description - -# List of 2019 keymaps - -* **default** default 2019 macropad layout \ No newline at end of file diff --git a/keyboards/boston_meetup/2019/readme.md b/keyboards/boston_meetup/2019/readme.md deleted file mode 100644 index 2bdac9dcde1..00000000000 --- a/keyboards/boston_meetup/2019/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Boston Meetup 2019 Macropad - -![Boston Meetup 2019](https://i.imgur.com/6LgBc4g.jpg) - -Limited-run board designed for Boston MK community meetup 2019. - -Keyboard Maintainer: [ishtob](https://github.com/ishtob), [QMK](https://github.com/qmk) - -Make example for this keyboard (after setting up your build environment): - - make boston_meetup/2019:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk deleted file mode 100644 index 7c03a025eef..00000000000 --- a/keyboards/boston_meetup/2019/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ -# project specific files - -# Cortex version -MCU = STM32F303 - -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = no # Custom matrix file -AUDIO_ENABLE = yes -RGBLIGHT_ENABLE = no -RGB_MATRIX_ENABLE = no #WS2812 -HAPTIC_ENABLE += DRV2605L -QWIIC_ENABLE += MICRO_OLED -# SERIAL_LINK_ENABLE = yes diff --git a/keyboards/boston_meetup/boston_meetup.c b/keyboards/boston_meetup/boston_meetup.c deleted file mode 100644 index a9201ac8520..00000000000 --- a/keyboards/boston_meetup/boston_meetup.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "boston_meetup.h" - diff --git a/keyboards/boston_meetup/boston_meetup.h b/keyboards/boston_meetup/boston_meetup.h deleted file mode 100644 index e1d9d920603..00000000000 --- a/keyboards/boston_meetup/boston_meetup.h +++ /dev/null @@ -1,19 +0,0 @@ -#pragma once - -#ifdef KEYBOARD_boston_meetup_2019 - #include "2019.h" -#define LAYOUT( \ - K00, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ - ) \ -{ \ - { K00, KC_NO, KC_NO, KC_NO }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 } \ -} -#endif - -#include "quantum.h" \ No newline at end of file diff --git a/keyboards/boston_meetup/config.h b/keyboards/boston_meetup/config.h deleted file mode 100644 index b025e18df56..00000000000 --- a/keyboards/boston_meetup/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFB30 -#define PRODUCT_ID 0x26BE -#define MANUFACTURER ishtob -#define PRODUCT Boston Meetup Board -#define DESCRIPTION A limited-run community meetup board - -//#define AUDIO_VOICES - -//#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/boston_meetup/readme.md b/keyboards/boston_meetup/readme.md deleted file mode 100644 index 2fa1ec9583f..00000000000 --- a/keyboards/boston_meetup/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# Boston Meetup Macropads - -![Boston Meetup Macropads](https://i.imgur.com/yQcBF8g.jpg) - -Limited-run boards designed for Boston MK community meetups. - -Keyboard Maintainer: [ishtob](https://github.com/ishtob), [QMK](https://github.com/qmk) -Hardware Supported: Boston Meetup PCB 2018, 2019 - -Make example for this keyboard (after setting up your build environment): - - make boston_meetup/YYYY:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/boston_meetup/rules.mk b/keyboards/boston_meetup/rules.mk deleted file mode 100644 index 6dd899edc85..00000000000 --- a/keyboards/boston_meetup/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ - -DEFAULT_FOLDER = boston_meetup/2019 diff --git a/keyboards/bpiphany/frosty_flake/config.h b/keyboards/bpiphany/frosty_flake/config.h deleted file mode 100644 index 250a1b775b2..00000000000 --- a/keyboards/bpiphany/frosty_flake/config.h +++ /dev/null @@ -1,142 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bathroom Epiphanies -#define PRODUCT frosty_flake -#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid - -/* - * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies - * Ported from the Bathroom Epiphanies TMK Firmware: - * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers - * - */ - -/* key matrix size */ -#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic -#define MATRIX_COLS 18 // ColA - ColR in the schematic - -/* - * Keyboard Matrix Assignments - */ -#define UNUSED_PINS { B0, C4, D3 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/bpiphany/frosty_flake/frosty_flake.c b/keyboards/bpiphany/frosty_flake/frosty_flake.c deleted file mode 100644 index 1cd47603893..00000000000 --- a/keyboards/bpiphany/frosty_flake/frosty_flake.c +++ /dev/null @@ -1,63 +0,0 @@ -#include "frosty_flake.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - DDRB |= (1<<7); - DDRC |= (1<<5) | (1<<6); - - print_dec(usb_led); - - if (usb_led & (1<event.pressed) { // pointer - SEND_STRING("<- "); -// return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINS), END); - } - break; - case R_PIPE: - if (record->event.pressed) { // dplyr pipe - SEND_STRING("%>% "); -// return MACRO(D(LSFT), T(5), T(DOT), T(5), U(LSFT), END); - } - break; - } - return MACRO_NONE; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - } - return true; -} diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md deleted file mode 100644 index f12a0ffba1e..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md +++ /dev/null @@ -1,86 +0,0 @@ - -# TKL keymap for frosty\_flake -``` -make frosty_flake:QFR_JM - -dfu-programmer atmega32u2 erase -dfu-programmer atmega32u2 flash frosty_flake_QFR_JM.hex -dfu-programmer atmega32u2 start -``` - -##Layers -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bspc | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | Bspc | A | R | S | T | D | H | N | E | I | O | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | Z | X | C | V | B | K | M | , | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| Space/Lower |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' - -``` -### Base Layer - Colemak -The base layout is Colemak by default, but this can be changed to QWERTY via the *LOWER* layer. -* I've implemented COLEMAK = SAFE\_RANGE when enumerating the custom\_keycodes, but I don't actually know what this does... - -* Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses) - -#### Layer Shifting -* The spacebar is a **TAP_KEY** macro - Hold for momentary *LOWER* layer, Tap for Space. -* The Right hand ALT key is a **TAP_TOGGLE** macro for the *MOUSE* layer (RAlt is accessible through LOWER, if you want...) - -### LOWER -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | |>/|||Stop| << | >> | | F9 |MUTE|Vol-|Vol+| |QWTY|CLMK|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | Bspc | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab |PgUp|Home| Up | End| | | | | | | { | } | | | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | Bckspc|PgDn|Left|Down|Rght| | | | | | | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | <- |%>% | { | [ | ` | | | ] | } | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| |RAlt|RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' -``` -The *LOWER* layer contains a navigation cluster on the left hand. This layer is momentary when the spacebar or LOWER (RAlt) key is held and toggled on/off when the LOWER key is tapped. - -* The Navigation cluster is offset to the right compared to the traditional **WASD** nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster. - -* All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC\_NO), all modifiers (edge |\_| keys \[except 0, \. & Fn\] on the above keymap) and the ZXCV cluster are transparent (\_\_\_\_\_\_\_) to the Base layer. - -* The base layer can be switched to QWERTY or COLEMAK by pressing the Pause Break or Scroll Lock keys respectively - -### MOUSE -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Del | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab | WhU| WhL| MsU| WhR| | | M3 | M4 | M5 | | [ | ] | \ | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | BSPC | WhD| MsL| MsD| MsR| | |LClk |RClk | | | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | Z | X | C | V | | | | , | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| Accel ++ |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' -``` -The *MOUSE* layer contains keys replicating functions found on the mouse. - -* The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the *LOWER* layer. The scroll keys are analagous to the Page Up & Downkeys. -* The primary click (right & left) buttons are on the right home row (index & middle fingers) -* Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function. - diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk deleted file mode 100644 index 856481d0317..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/config.h b/keyboards/bpiphany/frosty_flake/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c deleted file mode 100644 index 9d40d4c9cc3..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c +++ /dev/null @@ -1,12 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ - ) -}; diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md deleted file mode 100644 index 11bf4825ffa..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for frosty_flake diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk deleted file mode 100644 index 5dcea846726..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h deleted file mode 100644 index 4bc6d2c3c03..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h +++ /dev/null @@ -1,18 +0,0 @@ -#pragma once - -// place overrides here -#define TAPPING_TERM 200 -#define LEADER_TIMEOUT 800 - -#define DISABLE_SPACE_CADET_ROLLOVER - -#define UNICODE_TYPE_DELAY 0 - -#define LSPO_KEY KC_9 -#define RSPC_KEY KC_0 - -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c deleted file mode 100644 index dd2098d945b..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c +++ /dev/null @@ -1,225 +0,0 @@ -#include QMK_KEYBOARD_H - -#define MAXEMOJITAPS 80 - - -//declarations for tap dancing emojis -void register_hex32(uint32_t hex); -void cycleEmojis(qk_tap_dance_state_t *state, void *user_data); -void cycleAnimals(qk_tap_dance_state_t *state, void *user_data); -void cycleFoods(qk_tap_dance_state_t *state, void *user_data); -void cycleEtc(qk_tap_dance_state_t *state, void *user_data); -void cycleAll(qk_tap_dance_state_t *state, void *user_data); - -void tap(uint16_t keycode){ - register_code(keycode); - unregister_code(keycode); -}; - -//Tap Dance Declarations -enum taps{ - TD_CTCPS = 0, - EMOJIS, - ANIMAL, - HAND, - MEMES, - COPA, - ALLS -}; - -enum unicode_name { - EMOTIS = 1,//80, //1F60x - 1F64x - ANIMALS, //64, //1F40x - 1F43x - SYMBOLS,// = 45, //1F300 - 1F32C - FOODS,// = 87 , //1F32D - - ETC,// = 192, //1F44x -1F4Fx - VEHICLES,// = 83, //1F68x - 1F6Dx - SUPPLEMENT,// = 32, //1F91x-1F92x - ALCHEMY,// = 116 //1F70x - 1F773 - -}; - -enum my_macros { - NEWDESK = 0, - LEFTDESK, - RIGHTDESK, - CLOSEDESK -}; - - -// Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - // Tap once for CTRL, twice for Caps Lock - [TD_CTCPS] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS), - [COPA] = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)), - [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800), - [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800), - //[SYMBOLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSymbols, NULL, NULL, 800), - [FOODS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleFoods, NULL, NULL, 800), - [ETC] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEtc, NULL, NULL, 800), - //[VEHICLES] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleVehicles, NULL, NULL, 800), - //[SUPPLEMENT] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSupplement, NULL, NULL, 800), - [ALLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAll, NULL, NULL, 800) -// Other declarations would go here, separated by commas, if you have them -}; - -// macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case NEWDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(D), U(LGUI), U(LCTL), U(D), END ); // NEW DESKTOP - } - break; - case LEFTDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(LEFT), U(LGUI), U(LCTL), U(LEFT), END ); // LEFT DESKTOP - } - break; - case RIGHTDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(RGHT), U(LGUI), U(LCTL), U(RGHT), END ); // RIGHT DESKTOP - } - break; - case CLOSEDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(F4), U(LGUI), U(LCTL), U(F4), END ); // CLOSE DESKTOP - } - break; - } - return MACRO_NONE; -}; - - -// emojis in unicode -const uint32_t PROGMEM unicode_map[] = { - [EMOTIS] = 0x1F600, - [ANIMALS] = 0x1F400, - [SYMBOLS] = 0x1F300, - [FOODS] = 0x1F32D, - [ETC] = 0x1F440, - [VEHICLES] = 0x1F680, - [SUPPLEMENT] = 0x1F910, - [ALCHEMY] = 0x1F700 - }; -// Layouts -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSPO, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - TD(TD_CTCPS), KC_LGUI, KC_LALT, KC_SPC, KC_LEAD, KC_RGUI, KC_APP, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ - ), - [1] = LAYOUT(\ - TD(ALLS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, TD(EMOJIS), TD(ANIMAL), TD(ETC), TD(FOODS), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPRV, KC_MPLY, KC_MNXT, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, M(0), KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_UP, KC_RBRC, KC_BSLS, KC_MUTE, KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_LCTL, M(1), M(3), M(2), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_LEFT, KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_DOWN, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_BTN1, KC_BTN3, KC_BTN2, KC_SPC, KC_RALT, KC_RGUI, TG(2), _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_P0, KC_PDOT \ - ), - [2] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPRV, KC_MPLY, KC_MNXT, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_MUTE, KC_VOLD, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_LCTL, KC_D, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_BTN1, KC_BTN3, KC_BTN2, KC_SPC, KC_RALT, KC_RGUI, TG(2), KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_P0, KC_PDOT \ - ), -}; - -LEADER_EXTERNS(); - -void matrix_scan_user(void) { - LEADER_DICTIONARY() { - leading = false; - leader_end(); - - SEQ_TWO_KEYS(KC_A, KC_A) { // select all and copy - register_code(KC_LCTL); - tap(KC_A); - tap(KC_C); - unregister_code(KC_LCTL); - } - } -} - -void matrix_init_user(void) { - _delay_ms(500); - set_unicode_input_mode(UC_WINC); -}; - -void cycleAll(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); - unicode_input_finish(); - } - else if(state->count <= 1642) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[1])+state->count); - unicode_input_finish(); - } -}; - - -void cycleEmojis(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); - unicode_input_finish(); - } - else if(state->count <= 80) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])+state->count); - unicode_input_finish(); - } -}; - -void cycleAnimals(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ANIMALS])); - unicode_input_finish(); - } - else if(state->count <= MAXEMOJITAPS) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ANIMALS])+state->count); - unicode_input_finish(); - } -}; - -void cycleFoods(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[FOODS])); - unicode_input_finish(); - } - else if(state->count <= 87) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[FOODS])+state->count); - unicode_input_finish(); - } -}; - - -void cycleEtc(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ETC])); - unicode_input_finish(); - } - else if(state->count <= MAXEMOJITAPS) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ETC])+state->count); - unicode_input_finish(); - } -}; - diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md deleted file mode 100644 index 0b01f9dbf82..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -# The Nikchi's keymap for frosty_flake - -### FEATURING --SPACE CADET --Caps Lock is now LCTRL --LCTRL is Tap(LCTRL, Caps Lock) - -### LEADER KEY - RALT -COMBOS --a,a => Select All, Copy - - - -### FN REBINDS for Windows -``` - [W] [New Desktop] -[A][S][D] [Left Desk][Delete Desk][Right Desk] - -[Ins][Hom][PUp] [RW][PP][FF] -[Del][End][PDn] [MU][VD][VU] - -Arrows are Mouskeys, left three mods are clicks - -``` \ No newline at end of file diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk deleted file mode 100644 index de0f30e48e7..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -UNICODEMAP_ENABLE = yes # unicodemap -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = yes -LEADER_ENABLE = yes diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md deleted file mode 100644 index b2e5041393f..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md +++ /dev/null @@ -1,9 +0,0 @@ -# Tap Dancing to different beats. -Tap Dance is constrained normally by `TAPPING_TERM` defined in your keyboard's config.h This proves to be challenging to work with when sometimes you just need more time to tap out your dance, or even a different "beat". - - - -- `ACTION_TAP_DANCE_FN_ADVANCED_TIME(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, tap_specific_tapping_term)` : This works the same as `ACTION_TAP_DANCE_FN_ADVANCED` just with the extra `tap_specific_tapping_term` arguement at the end. This way you can set a specific tap dance to have a longer or shorter tap in between your taps, giving you more, or less, time in between each tap. - - -`tap_specific_tapping_term` should be the same type and range of values that one would put into the `TAPPING_TERM` definition in the config.h file. diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h b/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c deleted file mode 100644 index 8e872397193..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_tkl(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) -}; diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md deleted file mode 100644 index a076a65de92..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md +++ /dev/null @@ -1 +0,0 @@ -# TKL keymap for frosty_flake diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk deleted file mode 100644 index c76a5a80e4b..00000000000 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/matrix.c b/keyboards/bpiphany/frosty_flake/matrix.c deleted file mode 100644 index 3c49e9c000f..00000000000 --- a/keyboards/bpiphany/frosty_flake/matrix.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - Copyright 2017 Gabriel Young - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -static matrix_row_t scan_col(void) { - return ( - (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | - (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) | - (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | - (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) | - (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | - (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) | - (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) | - (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7)) - ); -} - -static void select_col(uint8_t col) { - switch (col) { - case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break; - case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break; - case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break; - case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break; - case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break; - case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break; - case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break; - case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break; - case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break; - case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break; - case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break; - case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break; - case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break; - case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break; - case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break; - case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break; - case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break; - case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break; - } -} - -void matrix_init(void) { - /* Row output pins */ - DDRD |= 0b01111011; - /* Column input pins */ - DDRC &= ~0b10000000; - DDRB &= ~0b01111111; - PORTC |= 0b10000000; - PORTB |= 0b01111111; - - for (uint8_t i=0; i < MATRIX_ROWS; i++) - matrix[i] = matrix_debouncing[i] = 0; - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - matrix_row_t col_scan = scan_col(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6050 -#define DEVICE_VER 0x0104 -#define MANUFACTURER Costar -#define PRODUCT Majestouch - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 18 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -//#define MATRIX_ROW_PINS { D0, D5 } -//#define MATRIX_COL_PINS { F1, F0, B0 } -//#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/bpiphany/kitten_paw/info.json b/keyboards/bpiphany/kitten_paw/info.json deleted file mode 100644 index 7d2574710a3..00000000000 --- a/keyboards/bpiphany/kitten_paw/info.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "keyboard_name": "Kitten Paw", - "url": "", - "maintainer": "qmk", - "width": 22.5, - "height": 6.5, - "layouts": { - "LAYOUT": { - "key_count": 105, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"KC_NUBS", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] - }, - - "LAYOUT_fullsize_ansi": { - "key_count": 104, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] - } - } -} diff --git a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c deleted file mode 100644 index 3ad3247d492..00000000000 --- a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c +++ /dev/null @@ -1,47 +0,0 @@ -#include QMK_KEYBOARD_H - -enum layers { - DEFAULT, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DEFAULT] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h deleted file mode 100644 index 142aba89094..00000000000 --- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#undef MOUSEKEY_MOVE_MAX -#define MOUSEKEY_MOVE_MAX 127 -#undef MOUSEKEY_WHEEL_MAX -#define MOUSEKEY_WHEEL_MAX 110 -#undef MOUSEKEY_MOVE_DELTA -#define MOUSEKEY_MOVE_DELTA 5 -#undef MOUSEKEY_WHEEL_DELTA -#define MOUSEKEY_WHEEL_DELTA 1 -#undef MOUSEKEY_DELAY -#define MOUSEKEY_DELAY 50 -#undef MOUSEKEY_INTERVAL -#define MOUSEKEY_INTERVAL 20 -#undef MOUSEKEY_MAX_SPEED -#define MOUSEKEY_MAX_SPEED 4 -#undef MOUSEKEY_TIME_TO_MAX -#define MOUSEKEY_TIME_TO_MAX 30 -#undef MOUSEKEY_WHEEL_MAX_SPEED -#define MOUSEKEY_WHEEL_MAX_SPEED 3 -#undef MOUSEKEY_WHEEL_TIME_TO_MAX -#define MOUSEKEY_WHEEL_TIME_TO_MAX 255 -#undef ONESHOT_TIMEOUT -#define ONESHOT_TIMEOUT 500 -#undef TAPPING_TOGGLE -#define TAPPING_TOGGLE 2 - -#endif diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c deleted file mode 100644 index e2b56132bfb..00000000000 --- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c +++ /dev/null @@ -1,239 +0,0 @@ -#include QMK_KEYBOARD_H -#include "mousekey.h" - -#undef C -#undef S -#define C(kc) LCTL(KC_##kc) -#define S(kc) LSFT(KC_##kc) -#define RA(kc) RALT(KC_##kc) -#define KC_SLCT KC_SELECT -#define MEDAPP LT(MEDIA, KC_APP) - -uint8_t current_layer_global = 255; - -enum layers { - DEFAULT, - PROG1, - PROG2, - MEDIA, - MOUSE1, - MOUSE2, - MISC, -}; - -enum function_id { - LSHFT_PAREN, - RSHFT_PAREN, - LCTRL_BRACKET, - RCTRL_BRACKET, - LALT_CURLY, - RALT_CURLY, - CTRL_CLICK -}; - -enum macro_id { - GRV, - CFLEX -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DEFAULT] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - TT(MOUSE1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - F(8),KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, F(9), KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - F(1),KC_LGUI, F(3), LT(MISC, KC_SPC), F(4),TT(PROG1), MEDAPP, F(2), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT), - /* Layer 1: Programming Layer 1, emulating US l ayout */ - [PROG1] = LAYOUT(\ - KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH, S(0),_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,_______,_______,_______,_______, KC_Z,_______,_______,_______,_______, RA(8), RA(9),RA(MINS), _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS), _______, _______,_______,_______, \ - MO(PROG2),_______, KC_Y,_______,_______,_______,_______,_______,_______,_______,_______, S(7), MO(PROG2), _______, _______,_______,_______,_______, \ - _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), - /* Layer 2: programming layer 2 - all keys that are not FN keys are sent as LSFT+key on this layer - */ - [PROG2] = LAYOUT(\ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - RA(RBRC),_______, RA(Q),KC_BSLS,_______,_______,M(CFLEX), S(6),S(RBRC), S(8), S(9),S(SLSH),KC_RBRC,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RA(7), RA(0),RA(NUBS), _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT), S(2), _______, _______,_______,_______, \ - _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS), _______, _______, _______,_______,_______,_______, \ - _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), - /* Layer 3: media layer */ - [MEDIA] = LAYOUT(\ - KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ - XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_MPRV,KC_MPLY,KC_MNXT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ - XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_VOLD,KC_MUTE,KC_VOLU, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ - XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ - XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, KC_EJCT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ - XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,_______,XXXXXXX, KC_MRWD,KC_MSTP,KC_MFFD, XXXXXXX,XXXXXXX), - /* Layer 4: Mouse layer */ - [MOUSE1] = LAYOUT(\ - F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______, C(Z),_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R, F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______, _______, _______,_______,_______, \ - MO(MOUSE2),_______, C(Y), C(X), C(C), C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______, KC_RSFT, _______, _______,_______,_______,_______, \ - KC_LCTL,_______,KC_LALT, KC_BTN1, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, _______,_______,_______, _______,_______), - /* Layer 5: Mouse layer 2*/ - [MOUSE2] = LAYOUT(\ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______, _______, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______,_______,_______, \ - _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), - /* Layer 6: Misc layer */ - [MISC] = LAYOUT(\ - _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,KC_SLCT, C(W), KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ - _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______, _______, _______,_______,_______, \ - KC_LSFT,_______, C(Y), C(X), C(C), C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______, _______, _______, _______,_______,_______,_______, \ - _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET), // tap to print [ - [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET), // tap to print ] - [3] = ACTION_FUNCTION_TAP(LALT_CURLY), // tap to print { - [4] = ACTION_FUNCTION_TAP(RALT_CURLY), // tap to print } - [6] = ACTION_LAYER_SET_CLEAR(DEFAULT), - [7] = ACTION_FUNCTION_TAP(CTRL_CLICK), - [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN), // tap to print ( - [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN), // tap to print ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case GRV: // macro to print accent grave - return (record->event.pressed ? - MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) : - MACRO_NONE ); - case CFLEX: // print accent circonflex - return (record->event.pressed ? - MACRO( T(GRV), T(SPC), END ) : - MACRO_NONE ); - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - uint8_t layer; - layer = biton32(layer_state); - - if (current_layer_global != layer) { - current_layer_global = layer; - - // unset CAPSLOCK and SCROLL LOCK LEDs - led_set_kb(host_keyboard_leds() & ~(1<event.pressed) { - if (record->tap.count > 0 && !record->tap.interrupted) { - if (record->tap.interrupted) { - register_mods(MOD_BIT(orig_mod)); - } - } else { - register_mods(MOD_BIT(orig_mod)); - } - } else { - if (record->tap.count > 0 && !(record->tap.interrupted)) { - add_weak_mods(MOD_BIT(macro_mod)); - send_keyboard_report(); - register_code(macro_kc); - unregister_code(macro_kc); - del_weak_mods(MOD_BIT(macro_mod)); - send_keyboard_report(); - record->tap.count = 0; // ad hoc: cancel tap - } else { - unregister_mods(MOD_BIT(orig_mod)); - } - } -} - -/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */ -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder - switch (id) { - case LCTRL_BRACKET: - tap_helper(record, KC_LCTL, KC_RALT, KC_8); - break; - case RCTRL_BRACKET: - tap_helper(record, KC_RCTL, KC_RALT, KC_9); - break; - case LALT_CURLY: - tap_helper(record, KC_LALT, KC_RALT, KC_7); - break; - case RALT_CURLY: - tap_helper(record, KC_RALT, KC_RALT, KC_0); - break; - case LSHFT_PAREN: - tap_helper(record, KC_LSFT, KC_LSFT, KC_8); - break; - case RSHFT_PAREN: - tap_helper(record, KC_RSFT, KC_LSFT, KC_9); - break; - case CTRL_CLICK: - if (record->event.pressed) { - mousekey_clear(); - register_mods(MOD_BIT(KC_LCTL)); - send_keyboard_report(); - wait_ms(5); - mousekey_on(KC_BTN1); - mousekey_send(); - wait_ms(10); - mousekey_off(KC_BTN1); - mousekey_send(); - wait_ms(5); - unregister_mods(MOD_BIT(KC_LCTL)); - send_keyboard_report(); - } - break; - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - uint8_t layer; - layer = biton32(layer_state); - if (layer == PROG2) { - if (keycode >= KC_A && keycode <= KC_EXSEL && \ - !( // do not send LSFT + these keycodes, they are needed for emulating the US layout - keycode == KC_NONUS_BSLASH || - keycode == KC_RBRC || - keycode == KC_BSLS || - keycode == KC_GRV - )) { - // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior - if (record->event.pressed) { - register_mods(MOD_LSFT); - } else { - unregister_mods(MOD_LSFT); - } - } - } - return true; -} diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md deleted file mode 100644 index 0d23be4eac4..00000000000 --- a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# My personal keymap for the Kitten Paw controller - -This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished. - -## Description of the layers -Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except: -Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer. -Mouse and programming layer switches can be held or double-tapped to lock. -Holding space switches to the MISC layer where I currently accumulate useful shortcuts. -Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively. - -Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it. - -Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster. - -Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap. - -Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now. \ No newline at end of file diff --git a/keyboards/bpiphany/kitten_paw/kitten_paw.c b/keyboards/bpiphany/kitten_paw/kitten_paw.c deleted file mode 100644 index 26cb533f2db..00000000000 --- a/keyboards/bpiphany/kitten_paw/kitten_paw.c +++ /dev/null @@ -1,51 +0,0 @@ -#include "kitten_paw.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - CONFIG_LED_IO; - CONFIG_LED_IO; - print_dec(usb_led); - if (usb_led & (1< - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static uint8_t read_rows(void); -static void select_col(uint8_t col); - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -/* Column pin configuration - * - * col: 0 1 2 3 4 5 6 7 - * pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2 - * - * Rrr pin configuration - * - * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low - * active), together with 2 rrrs driven directly from the micro - * controller, to control the 18 rrrs. The rrrs are driven from - * pins B6,5,4,3,2,1,0. - */ -void matrix_init(void) { - DDRC &= ~0b10000100; // Row input pins - DDRD &= ~0b01111110; - PORTC |= 0b10000100; - PORTD |= 0b01111110; - - DDRB |= 0b01111111; // Column output pins - - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - uint8_t rows = read_rows(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6050 -#define DEVICE_VER 0x0104 -#define MANUFACTURER Filco -#define PRODUCT Majestouch TKL \\w The Pegasus Hoof -#define DESCRIPTION QMK firmware for Majestouch TKL - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 18 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -#endif diff --git a/keyboards/bpiphany/pegasushoof/info.json b/keyboards/bpiphany/pegasushoof/info.json deleted file mode 100644 index c4fa28ac46a..00000000000 --- a/keyboards/bpiphany/pegasushoof/info.json +++ /dev/null @@ -1,192 +0,0 @@ -{ - "keyboard_name": "Pegasus Hoof", - "url": "", - "maintainer": "qmk", - "width": 18.25, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"`", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"[", "x":11.5, "y":2.5}, - {"label":"]", "x":12.5, "y":2.5}, - {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":";", "x":10.75, "y":3.5}, - {"label":"'", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"Shift", "x":0, "y":4.5, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":4.5}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"x":3.75, "y":5.5, "w":6.25}, - {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, - {"label":"GUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5} - ] - }, - "LAYOUT_tkl_ansi": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"`", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"[", "x":11.5, "y":2.5}, - {"label":"]", "x":12.5, "y":2.5}, - {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":";", "x":10.75, "y":3.5}, - {"label":"'", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"Shift", "x":0, "y":4.5, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"x":3.75, "y":5.5, "w":6.25}, - {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, - {"label":"GUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5} - ] - } - } -} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c deleted file mode 100644 index 7db7e5d39ee..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c +++ /dev/null @@ -1,110 +0,0 @@ -/* -Copyright 2016 Daniel Svensson - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -/* Swedish keys */ -#define SE_HALF KC_GRV -#define SE_PLUS KC_MINS -#define SE_ACUT KC_EQL -#define SE_AO KC_LBRC -#define SE_CIRC KC_RBRC -#define SE_QUOT KC_BSLS -#define SE_OE KC_SCLN -#define SE_AE KC_QUOT -#define SE_MINS KC_SLSH -#define SE_LTGT KC_NUBS -#define SE_LCBR RALT(KC_7) -#define SE_LBRC RALT(KC_8) -#define SE_RBRC RALT(KC_9) -#define SE_RCBR RALT(KC_0) -#define SE_PIPE RALT(SE_LTGT) -#define SE_BSLS RALT(SE_PLUS) - -#define KM_BLOWRAK 0 -#define KM_QWERTY 1 -#define KM_MEDIA 2 -#define KM_HAXHAX 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Blowrak ISO layer, a Swedish take on Dvorak */ - [KM_BLOWRAK] = LAYOUT( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ - KC_TAB, SE_AO, SE_AE, SE_OE, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_COMM,SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ - KC_LCTRL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_H, KC_D, KC_T, KC_N, KC_S, SE_MINS, KC_ENT, \ - KC_LSFT, SE_LTGT,KC_DOT, KC_Q, KC_J, KC_K, KC_B, KC_X, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ - KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), - /* Layer 1: Standard ISO layer */ - [KM_QWERTY] = LAYOUT( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AO, SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ - KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SE_OE, SE_AE, KC_ENT, \ - KC_LSFT, SE_LTGT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, SE_MINS, KC_RSFT, KC_UP, \ - KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), - /* Layer 2: Media layer */ - [KM_MEDIA] = LAYOUT( \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_MUTE,_______,KC_VOLD, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \ - _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT), - /* Layer 3: Programming layer */ - [KM_HAXHAX] = LAYOUT( \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,SE_LCBR,SE_PIPE,SE_RCBR,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,SE_LBRC,SE_BSLS,SE_RBRC,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \ - _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA), - [1] = ACTION_LAYER_TOGGLE(KM_QWERTY) -}; - -void matrix_scan_user(void) -{ - uint8_t layer = biton32(layer_state); - switch (layer) { - case KM_BLOWRAK: - ph_caps_led_on(); - ph_sclk_led_off(); - break; - case KM_QWERTY: - ph_sclk_led_on(); - ph_caps_led_off(); - break; - } -} - -/* Mixes in KM_HAXHAX via RALT modifier without shadowing the RALT key combinations. */ -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - uint8_t modifiers = get_mods(); - if (modifiers & MOD_BIT(KC_RALT) && record->event.pressed) { - uint16_t kc = keymap_key_to_keycode(KM_HAXHAX, record->event.key); - if (kc != KC_TRNS) { - register_code(kc); - unregister_code(kc); - return false; - } - } - return true; -} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk deleted file mode 100644 index 8254a83891d..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h b/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h deleted file mode 100644 index 122627e88f4..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#pragma once - -/* overridden settings: */ - -#undef PRODUCT -#define PRODUCT Pegasus Hoof Citadel diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c deleted file mode 100644 index 5036bcb3f53..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c +++ /dev/null @@ -1,132 +0,0 @@ -/* Copyright 2018 Daniel Rose - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -/* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */ -/* Original shortcuts (quantum_keycodes.h) take full-sized keycodes: too long! */ -#undef C -#undef S -#undef A -#undef G -#define C(kc) LCTL(KC_##kc) -#define S(kc) LSFT(KC_##kc) -#define A(kc) LALT(KC_##kc) -#define G(kc) RALT(KC_##kc) -#define CTALDEL LCTL(LALT(KC_DEL)) - -enum layers { - DEF, - FUN, - RES, -}; - -enum tap_dance { - AF4, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: default layer (ISO-DE) - * .----. .-------------------. .-------------------. .-------------------. .--------------. - * |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:| - * | | | | | | | | | | | | | | | | | |SyRq| |A+F4| - * '----' '-------------------' '-------------------' '-------------------' '--------------' - * .------------------------------------------------------------------------. .--------------. - * |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp| - * |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | | - * |------------------------------------------------------------------------| |--------------| - * |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn| - * | | | | €| | | | | | | | |+ ~| n | | | | | - * |------------------------------------------------------------------\ t | '--------------' - * |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e | - * |Layer 2| | | | | | | | | | | |# | r | - * |------------------------------------------------------------------------| .----. - * |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up | - * | |< ¦| | | | | | | µ|, |. |- | | | | - * |------------------------------------------------------------------------| .--------------. - * |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ| - * | | | | | | |Lay 2| | | | | | - * '------------------------------------------------------------------------' '--------------' - * NUHS = true position of KC_NUHS - */ -[DEF] = LAYOUT( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,TD(AF4), \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_NUHS, KC_DEL, KC_END, KC_PGDN, \ - MO(FUN),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,/*NUHS*/KC_ENT, \ - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_LALT,MO(FUN),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT), - - /* Layer 1: function layer - * .----. .-------------------. .-------------------. .-------------------. .--------------. - * |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus| - * |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea| - * '----' '-------------------' '-------------------' '-------------------' '--------------' - * .------------------------------------------------------------------------. .--------------. - * | | | | | | | | | | | | | | | | | |Mou:| - * | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp| - * |------------------------------------------------------------------------| |--------------| - * | | | | | | | | | | | | |~ | | | | |Mou:| - * | | | | | | | | | | | | | | | | | |WhDn| - * |------------------------------------------------------------------\ | '--------------' - * |CapsLck|Mou:|Mou:| | | | | | | | | | | | - * | |Fast|Slow| | | | | | | | | | | | - * |------------------------------------------------------------------------| .----. - * | | | | | | | | |µ | | | | | |Mou:| - * | | | | | | | | | | | | | | |Up | - * |------------------------------------------------------------------------| .--------------. - * |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:| - * |Bttn2|Bttn1| | | | | | | |Left|Down|Righ| - * '------------------------------------------------------------------------' '--------------' - * - */ -[FUN] = LAYOUT( \ - CTALDEL, KC_MYCM,KC_WHOM,KC_CALC,KC_MSEL,KC_MPRV,KC_MNXT,KC_MPLY,KC_MSTP,KC_MUTE,KC_VOLD,KC_VOLU,MO(RES), _______,KC_SLCK,KC_PAUS, \ - _______,_______,_______,_______,_______,_______,_______,G(7), G(8), G(9), G(0), G(MINS),_______,_______, _______,_______,KC_WH_U, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,G(RBRC),_______, _______,_______,KC_WH_D, \ - KC_CAPS,KC_ACL2,KC_ACL0,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,G(M), _______,_______,_______, _______, KC_MS_U, \ - KC_BTN2,KC_BTN1,_______, _______, _______,KC_RGUI,KC_APP ,_______, KC_MS_L,KC_MS_D,KC_MS_R), - - -/* Layer 3: Reset layer (prevents accidental resets) */ -[RES] = LAYOUT( \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \ - _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______), -}; - -qk_tap_dance_action_t tap_dance_actions[] = { - /* Tap once: nothing. Tap twice: Alt+F4 */ - [AF4] = ACTION_TAP_DANCE_DOUBLE(XXXXXXX,A(F4)), -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - ph_caps_led_on(); - } else { - ph_caps_led_off(); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - ph_sclk_led_on(); - } else { - ph_sclk_led_off(); - } -} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md b/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md deleted file mode 100644 index 3618bae8618..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md +++ /dev/null @@ -1,75 +0,0 @@ -# Citadel keymap for pegasushoof - -Designed for ISO-DE and similar ISO layouts. - -The central idea of this keymap is to avoid unergonomic key combos that force the user to either press -multiple keys with one hand or to use the left hand for right-sided keys. For instance, ISO-DE users -have to press `AltGr`+`7` to type _{_. The keymap allows ergonomic access to the right-sided keys of the -German AltGr-layer by turning `Caps Lock` into a hybrid Fn/AltGr-key. It can easily be adapted for other -ISO layouts. - -The _Function_ layer also offers mouse emulation and function/media keys in the F-Row. - -`Pause/Break` is used as a safe _close key_: A _single tap_ does nothing, a _double tap_ executes ALT+F4. - -Named after the homonymous space station from _Mass Effect_. Made by [Daniel Rose](https://github.com/droseger/). - -## [1] Layers - -### Layer 1 (Default) - .----. .-------------------. .-------------------. .-------------------. .--------------. - |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:| - | | | | | | | | | | | | | | | | | |SyRq| |A+F4| - '----' '-------------------' '-------------------' '-------------------' '--------------' - .------------------------------------------------------------------------. .--------------. - |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp| - |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | | - |------------------------------------------------------------------------| |--------------| - |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn| - | | | | €| | | | | | | | |+ ~| n | | | | | - |------------------------------------------------------------------\ t | '--------------' - |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e | - |Layer 2| | | | | | | | | | | |# | r | - |------------------------------------------------------------------------| .----. - |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up | - | |< ¦| | | | | | | µ|, |. |- | | | | - |------------------------------------------------------------------------| .--------------. - |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ| - | | | | | | |Lay 2| | | | | | - '------------------------------------------------------------------------' '--------------' - -### Layer 2 (Function) - .----. .-------------------. .-------------------. .-------------------. .--------------. - |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus| - |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea| - '----' '-------------------' '-------------------' '-------------------' '--------------' - .------------------------------------------------------------------------. .--------------. - | | | | | | | | | | | | | | | | | |Mou:| - | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp| - |------------------------------------------------------------------------| |--------------| - | | | | | | | | | | | | |~ | | | | |Mou:| - | | | | | | | | | | | | | | | | | |WhDn| - |------------------------------------------------------------------\ | '--------------' - |CapsLck|Mou:|Mou:| | | | | | | | | | | | - | |Fast|Slow| | | | | | | | | | | | - |------------------------------------------------------------------------| .----. - | | | | | | | | |µ | | | | | |Mou:| - | | | | | | | | | | | | | | |Up | - |------------------------------------------------------------------------| .--------------. - |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:| - |Bttn2|Bttn1| | | | | | | |Left|Down|Righ| - '------------------------------------------------------------------------' '--------------' - -Layer 3 exists solely to prevent users from accidentally activating boot mode: `R` is redefined -as `RESET` key [3]. - -## [2] How to build and install -1) Prerequisite: install the necessary [build tools](https://docs.qmk.fm/#/getting_started_build_tools) -such as [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer). - - You might need to [add udev rules](https://docs.qmk.fm/#/faq_build?id=can39t-program-on-linux) under Linux. -2) To test if the keymap compiles, simply run `make pegasushoof:citadel` -3) Enter the `qmk_firmware` root directory and run `make pegasushoof:citadel:dfu` -4) Reset controller to _Boot mode_ by pressing the `RESET` key or by using a magnet. - -## [3] How to access Boot mode after install -Press `Fn+F12+R` diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk deleted file mode 100644 index 3eb289a7166..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -TAP_DANCE_ENABLE = yes # see https://docs.qmk.fm/#/feature_tap_dance (+1000) diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c deleted file mode 100644 index 621441b9013..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* -Copyright 2016 Daniel Svensson - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -#define KM_QWERTY 0 -#define KM_MEDIA 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Standard ISO layer */ - [KM_QWERTY] = LAYOUT( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CLCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ - ), - /* Layer 1: Function layer */ - [KM_MEDIA] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WAKE, KC_PWR, KC_SLEP, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, \ - _______, _______, _______, _______, _______, _______, RESET, _______, KC_MPRV, KC_MSTP, KC_MNXT \ - ) -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - ph_caps_led_on(); - } else { - ph_caps_led_off(); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - ph_sclk_led_on(); - } else { - ph_sclk_led_off(); - } -} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk deleted file mode 100644 index 8254a83891d..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/keymap.c deleted file mode 100644 index a7747418226..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/keymap.c +++ /dev/null @@ -1,54 +0,0 @@ -/* -Copyright 2016 Daniel Svensson - 2018 Charlie McMackin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -#define KM_JIS 0 -#define KM_MEDIA 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = - { - /* Layer 0: Standard JIS layer */ - [KM_JIS] = LAYOUT_tkl_jis(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_BSLS,KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI,KC_LALT,KC_MHEN, KC_SPC, KC_HENK,KC_KANA,KC_RALT,MO(1), KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT), - /* Layer 1: Function layer */ - [KM_MEDIA] = LAYOUT_tkl_jis(_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLD, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_MPLY, \ - _______,_______,_______,_______, _______, _______,_______,_______,_______,RESET , KC_MPRV,KC_MSTP,KC_MNXT) - }; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - ph_caps_led_on(); - } else { - ph_caps_led_off(); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - ph_sclk_led_on(); - } else { - ph_sclk_led_off(); - } -} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk deleted file mode 100644 index 8254a83891d..00000000000 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/matrix.c b/keyboards/bpiphany/pegasushoof/matrix.c deleted file mode 100644 index a670d538238..00000000000 --- a/keyboards/bpiphany/pegasushoof/matrix.c +++ /dev/null @@ -1,222 +0,0 @@ -/* -Copyright 2014 Ralf Schmitt -Copyright 2016 Daniel Svensson - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -static uint8_t debouncing = DEBOUNCE; -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void select_row(uint8_t col); - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - /* Column output pins */ - DDRD |= 0b01111011; - /* Row input pins */ - DDRC &= ~0b10000000; - DDRB &= ~0b01111111; - PORTC |= 0b10000000; - PORTB |= 0b01111111; - - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_row(col); - wait_us(30); - matrix_row_t rows = read_cols(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "pegasushoof.h" - - -extern inline void ph_caps_led_on(void); -extern inline void ph_caps_led_off(void); - -extern inline void ph_sclk_led_on(void); -extern inline void ph_sclk_led_off(void); - - -__attribute__ ((weak)) -void matrix_init_user(void) { -}; - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -__attribute__ ((weak)) -bool process_action_user(keyrecord_t *record) { - return true; -} - -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { -} - -void matrix_init_kb(void) { - matrix_init_user(); -} - -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -bool process_action_kb(keyrecord_t *record) { - return process_action_user(record); -} - -void led_set_kb(uint8_t usb_led) { - led_set_user(usb_led); -} diff --git a/keyboards/bpiphany/pegasushoof/pegasushoof.h b/keyboards/bpiphany/pegasushoof/pegasushoof.h deleted file mode 100644 index b91235aaddd..00000000000 --- a/keyboards/bpiphany/pegasushoof/pegasushoof.h +++ /dev/null @@ -1,83 +0,0 @@ -/* -Copyright 2016 Daniel Svensson - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef PEGASUSHOOF_H -#define PEGASUSHOOF_H - -#include "matrix.h" -#include "quantum.h" - -#define LAYOUT( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ - KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ - KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \ - ) { /* 00-A 01-B 02-C 03-D 04-E 05-F 06-G 07-H 08-I 09-J 10-K 11-L 12-M 13-N 14-O 15-P 16-Q 17-R */ \ - /* 0 */ { KC_NO , KC_NO , KC0 , KC_NO , KC_NO , KF0 , KC_NO , KC_NO , KC_NO , KJ0 , KK0 , KC_NO , KM0 , KN0 , KO0 , KC_NO , KQ0 , KR0 }, \ - /* 1 */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , KM1 , KC_NO , KO1 , KP1 , KC_NO , KC_NO }, \ - /* 2 */ { KC_NO , KB2 , KC_NO , KD2 , KC_NO , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , KM2 , KC_NO , KO2 , KC_NO , KC_NO , KC_NO }, \ - /* 3 */ { KA3 , KB3 , KC_NO , KC_NO , KC_NO , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , KC_NO , KO3 , KC_NO , KC_NO , KC_NO }, \ - /* 4 */ { KC_NO , KC_NO , KC4 , KC_NO , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , KM4 , KC_NO , KO4 , KP4 , KQ4 , KR4 }, \ - /* 5 */ { KC_NO , KC_NO , KC5 , KC_NO , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , KM5 , KN5 , KO5 , KP5 , KC_NO , KC_NO }, \ - /* 6 */ { KC_NO , KC_NO , KC6 , KC_NO , KC_NO , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , KC_NO , KN6 , KO6 , KC_NO , KQ6 , KC_NO }, \ - /* 7 */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , KC_NO , KP7 , KC_NO , KC_NO } \ - } - -#define LAYOUT_tkl_ansi( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ - KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ - KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \ - ) LAYOUT( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ - KB2,KC_NO,KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ - KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \ - ) - -#define LAYOUT_tkl_jis( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1, \ - KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0, KB3, KC6, \ - KP4, KD2, KN6, KG0, KQ6, KH0, KI0, KN0, KM0, KP1, KC0, KQ0, KR0 \ - ) { /* 00-A 01-B 02-C 03-D 04-E 05-F 06-G 07-H 08-I 09-J 10-K 11-L 12-M 13-N 14-O 15-P 16-Q 17-R */ \ - /* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KG0, KH0, KI0, KJ0, KK0, KL0, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \ - /* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \ - /* 2 */ { KC_NO, KB2, KC_NO, KD2, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KC_NO, KO2, KC_NO, KC_NO, KC_NO }, \ - /* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KC_NO, KO3, KC_NO, KC_NO, KC_NO }, \ - /* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \ - /* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \ - /* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KC_NO, KI6, KJ6, KK6, KL6, KC_NO, KN6, KO6, KC_NO, KQ6, KC_NO }, \ - /* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KK7, KL7, KO7, KP7, KC_NO, KC_NO } \ -} - -inline void ph_caps_led_on(void) { DDRC |= (1<<6); PORTC &= ~(1<<6); } -inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); } - -inline void ph_sclk_led_on(void) { DDRC |= (1<<5); PORTC &= ~(1<<5); } -inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } - - -#endif diff --git a/keyboards/bpiphany/pegasushoof/readme.md b/keyboards/bpiphany/pegasushoof/readme.md deleted file mode 100644 index 10ec79300ac..00000000000 --- a/keyboards/bpiphany/pegasushoof/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Pegasus Hoof Controller - -A replacement controller that turns your Filco Majestouch 87/88 mechanical keyboard into a fully programmable keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: Pegasus Hoof -Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/filco-pegasus-hoof-controller/) - -Make example for this keyboard (after setting up your build environment): - - make bpiphany/pegasus_hoof:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk deleted file mode 100644 index 00e4bb0ea10..00000000000 --- a/keyboards/bpiphany/pegasushoof/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ -# MCU name -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -LAYOUTS = tkl_ansi - -CUSTOM_MATRIX = yes -SRC = matrix.c diff --git a/keyboards/bpiphany/readme.md b/keyboards/bpiphany/readme.md deleted file mode 100644 index 992b7c908d5..00000000000 --- a/keyboards/bpiphany/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Bathroom Epiphanies - -bpiphany is the owner and designer of [Bathroom Epiphanies](http://bathroomepiphanies.com/). - -He is based in Sweden and creates several controller boards as a swappable component for some off the shelf keyboards. - diff --git a/keyboards/bpiphany/sixshooter/config.h b/keyboards/bpiphany/sixshooter/config.h deleted file mode 100644 index ade95cc1918..00000000000 --- a/keyboards/bpiphany/sixshooter/config.h +++ /dev/null @@ -1,122 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6666 -#define DEVICE_VER 0x0001 -#define MANUFACTURER bpiphany -#define PRODUCT sixshooter -#define DESCRIPTION A PCB for the CM Storm switch tester utilizing a Teensy 2.0. - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { } -#define MATRIX_COL_PINS { F7, F6, F1, F5, F4, F0 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/bpiphany/sixshooter/info.json b/keyboards/bpiphany/sixshooter/info.json deleted file mode 100644 index 79044589da1..00000000000 --- a/keyboards/bpiphany/sixshooter/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "SixShooter", - "maintainer": "qmk", - "url": "https://geekhack.org/index.php?topic=70033.0", - "width": 3, - "height": 2, - "layouts": { - "LAYOUT": { - "key_count": 6, - "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":0, "y":1}, {"label":"K04", "x":1, "y":1}, {"label":"K05", "x":2, "y":1}] - } - } -} diff --git a/keyboards/bpiphany/sixshooter/keymaps/default/keymap.c b/keyboards/bpiphany/sixshooter/keymaps/default/keymap.c deleted file mode 100644 index 51f115d935a..00000000000 --- a/keyboards/bpiphany/sixshooter/keymaps/default/keymap.c +++ /dev/null @@ -1,73 +0,0 @@ -/* Copyright 2018 QMK Community - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FN 1 - -// Define keyboard specific keycodes for controlling on/off for all LEDs as they -// are all on different pins with this PCB, rather than a single backlight pin -enum custom_keycodes { - SS_LON = SAFE_RANGE, - SS_LOFF -}; -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Base Layer: Media Keys - * ,-----------. - * |FN | V-| V+| - * |---+---+---| - * |Prv|Ply|Nxt| - * `-----------' - */ - [_BL] = LAYOUT( /* Base */ - MO(_FN), KC_VOLD, KC_VOLU, \ - KC_MPRV, KC_MPLY, KC_MNXT \ - ), - /* FN Layer: LED control - * ,-----------. - * |FN | V-| V+| - * |---+---+---| - * |Prv|Ply|Nxt| - * `-----------' - */ - [_FN] = LAYOUT( - KC_TRNS, SS_LON, SS_LOFF, \ - KC_NO, KC_NO, KC_NO - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - // Put your per-action keyboard code here. - // Runs for every action, just before processing by the firmware. - if (record->event.pressed) { - - // Check for custom keycodes for turning on and off LEDs - switch(keycode) { - case SS_LON: - sixshooter_led_all_on(); - return false; - case SS_LOFF: - sixshooter_led_all_off(); - return false; - } - } - return true; -}; - -void matrix_init_user(void) { - // Default all LEDs to on - sixshooter_led_all_on(); -} diff --git a/keyboards/bpiphany/sixshooter/keymaps/default/readme.md b/keyboards/bpiphany/sixshooter/keymaps/default/readme.md deleted file mode 100644 index 050a6f23418..00000000000 --- a/keyboards/bpiphany/sixshooter/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for sixshooter diff --git a/keyboards/bpiphany/sixshooter/readme.md b/keyboards/bpiphany/sixshooter/readme.md deleted file mode 100644 index f5d92600348..00000000000 --- a/keyboards/bpiphany/sixshooter/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# The Six Shooter - -A PCB for the CM Storm switch tester utilizing a Teensy 2.0 designed by Bpiphany. Because the PCB was designed with individual pins for each LED, there are custom keycodes (`SS_LON` and `SS_LOFF`) for turning on and off the backlight LEDs. - -Keyboard Maintainer: QMK Community -Hardware Supported: Six Shooter PCB, Teensy 2.0 -Hardware Availability: [GeekHack.org](https://geekhack.org/index.php?topic=70033.0) - -Make example for this keyboard (after setting up your build environment): - - make bpiphany/sixshooter:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk deleted file mode 100644 index 5bf8d21650f..00000000000 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ /dev/null @@ -1,64 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = halfkay - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bpiphany/sixshooter/sixshooter.c b/keyboards/bpiphany/sixshooter/sixshooter.c deleted file mode 100644 index 87a739454d3..00000000000 --- a/keyboards/bpiphany/sixshooter/sixshooter.c +++ /dev/null @@ -1,38 +0,0 @@ -#include "sixshooter.h" - -extern inline void sixshooter_led_0_on(void); -extern inline void sixshooter_led_1_on(void); -extern inline void sixshooter_led_2_on(void); -extern inline void sixshooter_led_3_on(void); -extern inline void sixshooter_led_4_on(void); -extern inline void sixshooter_led_5_on(void); - -extern inline void sixshooter_led_0_off(void); -extern inline void sixshooter_led_1_off(void); -extern inline void sixshooter_led_2_off(void); -extern inline void sixshooter_led_3_off(void); -extern inline void sixshooter_led_4_off(void); -extern inline void sixshooter_led_5_off(void); - -extern inline void sixshooter_led_all_on(void); -extern inline void sixshooter_led_all_off(void); - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/bpiphany/sixshooter/sixshooter.h b/keyboards/bpiphany/sixshooter/sixshooter.h deleted file mode 100644 index 490d562d061..00000000000 --- a/keyboards/bpiphany/sixshooter/sixshooter.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef SIXSHOOTER_H -#define SIXSHOOTER_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02, \ - K03, K04, K05 \ -) { \ - { K00, K01, K02, K03, K04, K05 }, \ -} - -inline void sixshooter_led_0_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); } -inline void sixshooter_led_1_on(void) { DDRC |= (1<<7); PORTC |= (1<<7); } -inline void sixshooter_led_2_on(void) { DDRD |= (1<<0); PORTD |= (1<<0); } -inline void sixshooter_led_3_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); } -inline void sixshooter_led_4_on(void) { DDRD |= (1<<7); PORTD |= (1<<7); } -inline void sixshooter_led_5_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); } - -inline void sixshooter_led_0_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); } -inline void sixshooter_led_1_off(void) { DDRC &= ~(1<<7); PORTC &= ~(1<<7); } -inline void sixshooter_led_2_off(void) { DDRD &= ~(1<<0); PORTD &= ~(1<<0); } -inline void sixshooter_led_3_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); } -inline void sixshooter_led_4_off(void) { DDRD &= ~(1<<7); PORTD &= ~(1<<7); } -inline void sixshooter_led_5_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); } - -inline void sixshooter_led_all_on(void) { - sixshooter_led_0_on(); - sixshooter_led_1_on(); - sixshooter_led_2_on(); - sixshooter_led_3_on(); - sixshooter_led_4_on(); - sixshooter_led_5_on(); -} -inline void sixshooter_led_all_off(void) { - sixshooter_led_0_off(); - sixshooter_led_1_off(); - sixshooter_led_2_off(); - sixshooter_led_3_off(); - sixshooter_led_4_off(); - sixshooter_led_5_off(); -} - -#endif diff --git a/keyboards/bpiphany/tiger_lily/config.h b/keyboards/bpiphany/tiger_lily/config.h deleted file mode 100644 index 1ab352ccb8d..00000000000 --- a/keyboards/bpiphany/tiger_lily/config.h +++ /dev/null @@ -1,142 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bathroom Epiphanies -#define PRODUCT tiger_lily -#define DESCRIPTION Tiger Lily controller for the Filco Majestouch 2 - -/* - * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies - * Ported from the Bathroom Epiphanies TMK Firmware: - * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers - * - */ - -/* key matrix size */ -#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic -#define MATRIX_COLS 18 // ColA - ColR in the schematic - -/* - * Keyboard Matrix Assignments - */ -#define UNUSED_PINS { B0, C4, D3 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/bpiphany/tiger_lily/info.json b/keyboards/bpiphany/tiger_lily/info.json deleted file mode 100644 index 1a2194b06ff..00000000000 --- a/keyboards/bpiphany/tiger_lily/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "tiger_lily", - "url": "", - "maintainer": "qmk", - "width": 22.5, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] - }, - "LAYOUT_fullsize_ansi": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] - } - } -} diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/config.h b/keyboards/bpiphany/tiger_lily/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c b/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c deleted file mode 100644 index 46c17aca8be..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) -}; \ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md b/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md deleted file mode 100644 index 4626859df4c..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for tiger_lily diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk deleted file mode 100644 index 7a331cd530c..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h deleted file mode 100644 index 8893d122e04..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c deleted file mode 100644 index 6457b0282af..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_fullsize_ansi(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) -}; \ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md deleted file mode 100644 index 2cb8c899353..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# default_ansi - -A standard fullsize ANSI-layout keymap for Tiger Lily-powered keyboards. diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk deleted file mode 100644 index 7a331cd530c..00000000000 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/bpiphany/tiger_lily/matrix.c b/keyboards/bpiphany/tiger_lily/matrix.c deleted file mode 100644 index 47a92268c86..00000000000 --- a/keyboards/bpiphany/tiger_lily/matrix.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - Copyright 2017 Gabriel Young - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -static matrix_row_t scan_col(void) { - return ( - (PINC&(1<<2) ? 0 : ((matrix_row_t)1<<0)) | \ - (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<1)) | \ - (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | \ - (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<3)) | \ - (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | \ - (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<5)) | \ - (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<6)) | \ - (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<7)) - ); -} - -static void select_col(uint8_t col) { - switch (col) { - case 0: PORTD = (PORTD & ~0b01110111) | 0b01110110; break; \ - case 1: PORTD = (PORTD & ~0b01110111) | 0b01100001; break; \ - case 2: PORTD = (PORTD & ~0b01110111) | 0b01100101; break; \ - case 3: PORTD = (PORTD & ~0b01110111) | 0b00000011; break; \ - case 4: PORTD = (PORTD & ~0b01110111) | 0b00000111; break; \ - case 5: PORTD = (PORTD & ~0b01110111) | 0b00010011; break; \ - case 6: PORTD = (PORTD & ~0b01110111) | 0b00010111; break; \ - case 7: PORTD = (PORTD & ~0b01110111) | 0b00100011; break; \ - case 8: PORTD = (PORTD & ~0b01110111) | 0b00100111; break; \ - case 9: PORTD = (PORTD & ~0b01110111) | 0b00110011; break; \ - case 10: PORTD = (PORTD & ~0b01110111) | 0b01110010; break; \ - case 11: PORTD = (PORTD & ~0b01110111) | 0b01100110; break; \ - case 12: PORTD = (PORTD & ~0b01110111) | 0b01110000; break; \ - case 13: PORTD = (PORTD & ~0b01110111) | 0b01100100; break; \ - case 14: PORTD = (PORTD & ~0b01110111) | 0b01100000; break; \ - case 15: PORTD = (PORTD & ~0b01110111) | 0b01000111; break; \ - case 16: PORTD = (PORTD & ~0b01110111) | 0b01000011; break; \ - case 17: PORTD = (PORTD & ~0b01110111) | 0b00110111; break; - } -} - -void matrix_init(void) { - /* Column output pins */ \ - DDRD |= 0b01110111; \ - /* Row input pins */ \ - DDRC &= ~0b10000100; \ - DDRB &= ~0b01111110; \ - PORTC |= 0b10000100; \ - PORTB |= 0b01111110; - - for (uint8_t i=0; i < MATRIX_ROWS; i++) - matrix[i] = matrix_debouncing[i] = 0; - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - matrix_row_t col_scan = scan_col(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1337 -#define DEVICE_VER 0x0001 -#define MANUFACTURER BathroomEpiphanies -#define PRODUCT Unloved Bastard -#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 18 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/bpiphany/unloved_bastard/info.json b/keyboards/bpiphany/unloved_bastard/info.json deleted file mode 100644 index efa995088b4..00000000000 --- a/keyboards/bpiphany/unloved_bastard/info.json +++ /dev/null @@ -1,16 +0,0 @@ -{ - "keyboard_name": "unloved_bastard", - "url": "", - "maintainer": "qmk", - "bootloader": "", - "width": 18.25, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] - }, - "LAYOUT_tkl_ansi": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] - } - } -} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h b/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h deleted file mode 100644 index ed56340c391..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 Alexander Fougner - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c deleted file mode 100644 index 0576cb24226..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright 2018 Alexander Fougner - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md b/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md deleted file mode 100644 index a2b5f1192fd..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for unloved_bastard diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h deleted file mode 100644 index c55f7f9f7d2..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2018 Alexander Fougner - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -// place overrides here - -#endif diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c deleted file mode 100644 index afae406b1e9..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright 2018 Alexander Fougner - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_tkl_ansi(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md deleted file mode 100644 index 00d90f12c94..00000000000 --- a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# default_ansi - -A standard tenkeyless ANSI-layout keymap for Unloved Bastard-powered keyboards. diff --git a/keyboards/bpiphany/unloved_bastard/matrix.c b/keyboards/bpiphany/unloved_bastard/matrix.c deleted file mode 100644 index 328d9015c25..00000000000 --- a/keyboards/bpiphany/unloved_bastard/matrix.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - Copyright 2017 Gabriel Young - Copyright 2018 Alexander Fougner - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t scan_col(void) { - return ( - (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | - (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) | - (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) | - (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) | - (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) | - (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) | - (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) | - (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7)) - ); -} - -static void select_col(uint8_t col) { - switch (col) { - case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break; - case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break; - case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break; - case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break; - case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break; - case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break; - case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break; - case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break; - case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break; - case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break; - case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break; - case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break; - case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break; - case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break; - case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break; - case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break; - case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break; - case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break; - } -} - -void matrix_init(void) { - /* Row output pins */ - DDRD |= 0b00111111; - /* Column input pins */ - DDRC &= ~0b10000000; - DDRB &= ~0b01111111; - PORTC |= 0b10000000; - PORTB |= 0b01111111; - - for (uint8_t i=0; i < MATRIX_ROWS; i++) - matrix[i] = matrix_debouncing[i] = 0; - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - matrix_row_t col_scan = scan_col(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1< - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "unloved_bastard.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - led_init_ports(); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); -} - -// C5 left -// C6 middle led -// B7 right led -void led_init_ports(void) { - DDRB |= (1<<7); - DDRC |= (1<<5); - DDRC |= (1<<6); - - PORTB |= (1<<7); - PORTC |= (1<<5); - PORTC |= (1<<6); -} - - -void led_set_kb(uint8_t usb_led) { - - if (usb_led & (1<. - */ -#ifndef UNLOVED_BASTARD_H -#define UNLOVED_BASTARD_H - -#include "quantum.h" - -#define LAYOUT( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ - KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ - KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \ -) \ -{ \ -/* Columns and rows need to be swapped in the below definition */ \ -/* A B C D E F G H I J K L M N O P Q R */ \ -/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \ -/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \ -/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \ -/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \ -/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \ -/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \ -/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \ -/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \ -} - -#define LAYOUT_tkl_ansi( \ - KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ - KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ - KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ - KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ - KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ - KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \ -) \ -{ \ -/* Columns and rows need to be swapped in the below definition */ \ -/* A B C D E F G H I J K L M N O P Q R */ \ -/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \ -/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \ -/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \ -/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \ -/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \ -/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \ -/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KC_NO, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \ -/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \ -} - -#endif diff --git a/keyboards/bthlabs/geekpad/config.h b/keyboards/bthlabs/geekpad/config.h deleted file mode 100644 index c2b3dd3039f..00000000000 --- a/keyboards/bthlabs/geekpad/config.h +++ /dev/null @@ -1,222 +0,0 @@ -/* -Copyright 2019-present Tomek Wójcik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4257 -#define DEVICE_VER 0x0001 -#define MANUFACTURER BTHLabs -#define PRODUCT GeekPad -#define DESCRIPTION 3x3 custom macro pad - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F5, F6 } -#define MATRIX_COL_PINS { D4, D0, D1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLIGHT_ANIMATIONS -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -// #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/bthlabs/geekpad/geekpad.c b/keyboards/bthlabs/geekpad/geekpad.c deleted file mode 100644 index e52507c93dc..00000000000 --- a/keyboards/bthlabs/geekpad/geekpad.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019-present Tomek Wójcik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "geekpad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/bthlabs/geekpad/geekpad.h b/keyboards/bthlabs/geekpad/geekpad.h deleted file mode 100644 index c9f1ac9d4f6..00000000000 --- a/keyboards/bthlabs/geekpad/geekpad.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2019-present Tomek Wójcik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef GEEKPAD_H -#define GEEKPAD_H - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K00, K01, K02, \ - K10, K11, K12, \ - K20, K21, K22 \ -) \ -{ \ - { K00, K01, K02 }, \ - { K10, K11, K12 }, \ - { K20, K21, K22 } \ -} - -#endif diff --git a/keyboards/bthlabs/geekpad/info.json b/keyboards/bthlabs/geekpad/info.json deleted file mode 100644 index c95497c5537..00000000000 --- a/keyboards/bthlabs/geekpad/info.json +++ /dev/null @@ -1,22 +0,0 @@ -{ - "keyboard_name": "BTHLabs GeekPad", - "url": "https://git.bthlabs.pl/tomekwojcik/geekpad", - "maintainer": "Tomek Wójcik ", - "width": 3, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2,"y": 0}, - {"x": 0, "y": 1}, - {"x": 1, "y": 1}, - {"x": 2,"y": 1}, - {"x": 0, "y": 2}, - {"x": 1, "y": 2}, - {"x": 2,"y": 2} - ] - } - } -} diff --git a/keyboards/bthlabs/geekpad/keymaps/default/config.h b/keyboards/bthlabs/geekpad/keymaps/default/config.h deleted file mode 100644 index 1cba162c796..00000000000 --- a/keyboards/bthlabs/geekpad/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019-present Tomek Wójcik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/bthlabs/geekpad/keymaps/default/keymap.c b/keyboards/bthlabs/geekpad/keymaps/default/keymap.c deleted file mode 100644 index a8791e70cab..00000000000 --- a/keyboards/bthlabs/geekpad/keymaps/default/keymap.c +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2019-present Tomek Wójcik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_F1, KC_F2, KC_F3, - KC_MEDIA_REWIND, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_FAST_FORWARD, - KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP - ), -}; diff --git a/keyboards/bthlabs/geekpad/readme.md b/keyboards/bthlabs/geekpad/readme.md deleted file mode 100644 index 6558c32d979..00000000000 --- a/keyboards/bthlabs/geekpad/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# BTHLabs GeekPad - -![GeekPad](https://i.imgur.com/FEzO81l.jpg) - -A 3x3 custom macro pad designed and developed by Tomek Wójcik. - -Keyboard Maintainer: [Tomek Wójcik](https://www.bthlabs.pl/) -Hardware Supported: GeekPad Custom PCB -Hardware Availability: [Project Repository](https://git.bthlabs.pl/tomekwojcik/geekpad) - -Make example for this keyboard (after setting up your build environment): - - make bthlabs/geekpad:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk deleted file mode 100644 index d4785aabbea..00000000000 --- a/keyboards/bthlabs/geekpad/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/business_card/alpha/alpha.c b/keyboards/business_card/alpha/alpha.c deleted file mode 100644 index 3d2d1de7790..00000000000 --- a/keyboards/business_card/alpha/alpha.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "alpha.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/business_card/alpha/alpha.h b/keyboards/business_card/alpha/alpha.h deleted file mode 100644 index 98075768998..00000000000 --- a/keyboards/business_card/alpha/alpha.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - k00, k01, k02, \ - k10, k11, k12 \ -) \ -{ \ - { k00, k01, k02 }, \ - { k10, k11, k12 }, \ -} diff --git a/keyboards/business_card/alpha/config.h b/keyboards/business_card/alpha/config.h deleted file mode 100644 index e0324d65448..00000000000 --- a/keyboards/business_card/alpha/config.h +++ /dev/null @@ -1,243 +0,0 @@ -/* -Copyright 2019 kakunpc - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER kakunpc -#define PRODUCT business_card -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, B6 } -#define MATRIX_COL_PINS { E6, B4, B5 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN D3 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/business_card/alpha/keymaps/default/config.h b/keyboards/business_card/alpha/keymaps/default/config.h deleted file mode 100644 index 7c15789bdf2..00000000000 --- a/keyboards/business_card/alpha/keymaps/default/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here -#ifdef RGB_DI_PIN - #define RGBLIGHT_ANIMATIONS -#endif diff --git a/keyboards/business_card/alpha/keymaps/default/keymap.c b/keyboards/business_card/alpha/keymaps/default/keymap.c deleted file mode 100644 index 4c7b4237c37..00000000000 --- a/keyboards/business_card/alpha/keymaps/default/keymap.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user - -const uint16_t PROGMEM -keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = -LAYOUT(/* Base */ - KC_1, KC_2, KC_3, - KC_4, KC_5, KC_6 -), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -void led_set_user(uint8_t usb_led) {} - -void keyboard_post_init_user(void) { - rgblight_enable_noeeprom(); - rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_MOOD); -} - -#ifdef OLED_DRIVER_ENABLE -static void render_logo(void) { - static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, - 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0}; - - oled_write_P(qmk_logo, false); -} -void oled_task_user(void) { render_logo(); } -#endif diff --git a/keyboards/business_card/alpha/keymaps/default/readme.md b/keyboards/business_card/alpha/keymaps/default/readme.md deleted file mode 100644 index 22cc77eebff..00000000000 --- a/keyboards/business_card/alpha/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for business_card \ No newline at end of file diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk deleted file mode 100644 index 8bb38a51426..00000000000 --- a/keyboards/business_card/alpha/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = yes diff --git a/keyboards/business_card/beta/beta.c b/keyboards/business_card/beta/beta.c deleted file mode 100644 index c43be6c16ad..00000000000 --- a/keyboards/business_card/beta/beta.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "beta.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/business_card/beta/beta.h b/keyboards/business_card/beta/beta.h deleted file mode 100644 index 21a334e8a9e..00000000000 --- a/keyboards/business_card/beta/beta.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - k00, k01, \ - k10, k11, \ - k20, k21 \ -) \ -{ \ - { k21, k20 }, \ - { k11, k10 }, \ - { k01, k00 }, \ -} diff --git a/keyboards/business_card/beta/config.h b/keyboards/business_card/beta/config.h deleted file mode 100644 index fc6514982f1..00000000000 --- a/keyboards/business_card/beta/config.h +++ /dev/null @@ -1,243 +0,0 @@ -/* -Copyright 2019 kakunpc - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER kakunpc -#define PRODUCT business_card -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 2 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B3, B2, B6 } -#define MATRIX_COL_PINS { B4, B5 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN D3 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 6 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/business_card/beta/keymaps/default/config.h b/keyboards/business_card/beta/keymaps/default/config.h deleted file mode 100644 index e04ba7e4d03..00000000000 --- a/keyboards/business_card/beta/keymaps/default/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here - -#ifdef RGB_DI_PIN - #define RGBLIGHT_ANIMATIONS -#endif \ No newline at end of file diff --git a/keyboards/business_card/beta/keymaps/default/keymap.c b/keyboards/business_card/beta/keymaps/default/keymap.c deleted file mode 100644 index c317a236c43..00000000000 --- a/keyboards/business_card/beta/keymaps/default/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM -keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = -LAYOUT(/* Base */ - KC_1, KC_2, - KC_3, KC_4, - KC_5, KC_6 -), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -void matrix_init_user(void) { - rgblight_enable_noeeprom(); - rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_MOOD); -} - -void matrix_scan_user(void) {} - -void led_set_user(uint8_t usb_led) {} - -void keyboard_post_init_user(void) {} - -#ifdef OLED_DRIVER_ENABLE -static void render_logo(void) { - static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, - 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0}; - - oled_write_P(qmk_logo, false); -} -void oled_task_user(void) { render_logo(); } -#endif diff --git a/keyboards/business_card/beta/keymaps/default/readme.md b/keyboards/business_card/beta/keymaps/default/readme.md deleted file mode 100644 index 22cc77eebff..00000000000 --- a/keyboards/business_card/beta/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for business_card \ No newline at end of file diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk deleted file mode 100644 index 8bb38a51426..00000000000 --- a/keyboards/business_card/beta/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = yes diff --git a/keyboards/business_card/business_card.c b/keyboards/business_card/business_card.c deleted file mode 100644 index a57c004570b..00000000000 --- a/keyboards/business_card/business_card.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "business_card.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/business_card/business_card.h b/keyboards/business_card/business_card.h deleted file mode 100644 index f330a01822e..00000000000 --- a/keyboards/business_card/business_card.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2019 kakunpc - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#ifdef KEYBOARD_business_card_alpha - #include "alpha.h" -#endif -#ifdef KEYBOARD_business_card_beta - #include "beta.h" -#endif - -#include "quantum.h" diff --git a/keyboards/business_card/config.h b/keyboards/business_card/config.h deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/business_card/info.json b/keyboards/business_card/info.json deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/business_card/readme.md b/keyboards/business_card/readme.md deleted file mode 100644 index c1bb32c9c3b..00000000000 --- a/keyboards/business_card/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# business_card - -![business_card](imgur.com image replace me!) - -A short description of the keyboard/project - -Keyboard Maintainer: [kakunpc](https://github.com/kakunpc) -Hardware Supported: The PCBs, controllers supported -Hardware Availability: links to where you can find this hardware - -Make example for this keyboard (after setting up your build environment): - - make business_card:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk deleted file mode 100644 index c12d659d067..00000000000 --- a/keyboards/business_card/rules.mk +++ /dev/null @@ -1,83 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -DEFAULT_FOLDER = business_card/beta diff --git a/keyboards/butterstick/butterstick.c b/keyboards/butterstick/butterstick.c deleted file mode 100644 index 6c00bbe5dfd..00000000000 --- a/keyboards/butterstick/butterstick.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2019 Jeremy Bernhardt - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "butterstick.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} -*/ - -void matrix_scan_kb(void) { -#ifdef DEBUG_MATRIX - for (uint8_t c = 0; c < MATRIX_COLS; c++) - for (uint8_t r = 0; r < MATRIX_ROWS; r++) - if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c); -#endif - - matrix_scan_user(); -} - -/* -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/butterstick/butterstick.h b/keyboards/butterstick/butterstick.h deleted file mode 100644 index f97488c3f58..00000000000 --- a/keyboards/butterstick/butterstick.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_butter( \ - k09, k08, k07, k06, k05, k04, k03, k02, k01, k00, \ - k19, k18, k17, k16, k15, k14, k13, k12, k11, k10 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09}, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19}, \ -} diff --git a/keyboards/butterstick/config.h b/keyboards/butterstick/config.h deleted file mode 100644 index 90875d2eedd..00000000000 --- a/keyboards/butterstick/config.h +++ /dev/null @@ -1,25 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1337 -#define DEVICE_VER 0x0001 -#define MANUFACTURER g Heavy Industries -#define PRODUCT Butter Stick -#define DESCRIPTION Its a stick of butter -#define VERSION "Paula Deen" - -#define DEBOUNCE 5 -#define FORCE_NKRO - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 10 -#define MATRIX_ROW_PINS { F4, F5 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7} -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL diff --git a/keyboards/butterstick/keymaps/default/keymap.c b/keyboards/butterstick/keymaps/default/keymap.c deleted file mode 100644 index e4d1ea91f3e..00000000000 --- a/keyboards/butterstick/keymaps/default/keymap.c +++ /dev/null @@ -1,184 +0,0 @@ -#include QMK_KEYBOARD_H - -#include "sten.h" -/* - * Key names are inherited from steno machines - * .-----------------------------------------------------. - * | LSU | LFT | LP | LH | ST1 | RF | RP | RL | RT | RD | - * |-----------------------------------------------------| - * | LSD | LK | LW | LR | ST2 | RR | RB | RG | RS | RZ | - * '-----------------------------------------------------' - */ - -// Function prefixes -#define MEDIA (LSD | LK | LW | LR) -#define FUNCT (LSD | LK | LP | LH) -#define MOVE (LSU | LFT | LP | LH) -#define SYMB (RD | RZ) -#define NUMA (LW | LR) -#define NUMB (RR | RB) - -// QMK Layer Numbers - #define BASE 0 - #define GAME 1 - -// Do not change QMK Layer 0! This is your main keyboard. -// Make your QMK modifications to the later layers, to add -// keys/customize on the first layer modify processQwerty(): -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT_butter( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR - ), - // I don't game don't roast me thanks - [GAME] = LAYOUT_butter( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_ENT, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(BASE) - ) -}; - -// Note: You can only use basic keycodes here! -// P() is just a wrapper to make your life easier, any C code can be executed. -// Only the longest matched chord is run! -// -// http://docs.gboards.ca -uint32_t processQwerty(bool lookup) { - // SECRET AGENT CHORDS - P( LSU | LK | RS | RD, SEND_STRING(VERSION); SEND_STRING(__DATE__)); - P( LR | ST2| RR | RB, SEND(KC_BSPC)); - P( LSD | RZ, SEND(KC_SPC)); - - // Dual chords - P( LP | LH, CLICK_MOUSE(KC_MS_BTN2)); - P( ST1 | RF, CLICK_MOUSE(KC_MS_BTN1)); - P( LSU | LFT, SEND(KC_ESC)); - P( LSD | LK, SEND(KC_LSFT)); - P( RZ | RS, SEND(KC_LSFT)); - P( ST2 | RR, SEND(KC_SPC)); - P( RP | RL, SEND(KC_LGUI)); - P( RT | RD, SEND(KC_LCTL)); - P( RL | RT, SEND(KC_LALT)); - P( LSU | LSD | LFT | LK, SEND(KC_LCTL)); - P( RS | RT | RD | RZ, SEND(KC_ENT)); - - // Function Layer - P( FUNCT | RF, SEND(KC_F1)); - P( FUNCT | RP, SEND(KC_F2)); - P( FUNCT | RL, SEND(KC_F3)); - P( FUNCT | RT, SEND(KC_F4)); - P( FUNCT | RF | RR, SEND(KC_F5)); - P( FUNCT | RP | RB, SEND(KC_F6)); - P( FUNCT | RL | RG, SEND(KC_F7)); - P( FUNCT | RT | RS, SEND(KC_F8)); - P( FUNCT | RR, SEND(KC_F9)); - P( FUNCT | RB, SEND(KC_F10)); - P( FUNCT | RG, SEND(KC_F11)); - P( FUNCT | RS, SEND(KC_F12)); - - // Movement Layer - P( MOVE | RF, SEND(KC_LEFT)); - P( MOVE | RP, SEND(KC_DOWN)); - P( MOVE | RL, SEND(KC_UP)); - P( MOVE | RT, SEND(KC_RIGHT)); - P( MOVE | ST1, SEND(KC_PGUP)); - P( MOVE | ST2, SEND(KC_PGDN)); - - // Media Layer - P( MEDIA | RF, SEND(KC_MPRV)); - P( MEDIA | RP, SEND(KC_MPLY)); - P( MEDIA | RL, SEND(KC_MPLY)); - P( MEDIA | RT, SEND(KC_MNXT)); - P( MEDIA | RG, SEND(KC_VOLU)); - P( MEDIA | RB, SEND(KC_VOLD)); - P( MEDIA | RS, SEND(KC_MUTE)); - - // Number Row, Right - P( NUMB | LSU, SEND(KC_1)); - P( NUMB | LFT, SEND(KC_2)); - P( NUMB | LP, SEND(KC_3)); - P( NUMB | LH, SEND(KC_4)); - P( NUMB | ST1, SEND(KC_5)); - P( NUMB | RF, SEND(KC_6)); - P( NUMB | RP, SEND(KC_7)); - P( NUMB | RL, SEND(KC_8)); - P( NUMB | RT, SEND(KC_9)); - P( NUMB | RD, SEND(KC_0)); - - // Number Row, Left - P( NUMA | LSU, SEND(KC_1)); - P( NUMA | LFT, SEND(KC_2)); - P( NUMA | LP, SEND(KC_3)); - P( NUMA | LH, SEND(KC_4)); - P( NUMA | ST1, SEND(KC_5)); - P( NUMA | RF, SEND(KC_6)); - P( NUMA | RP, SEND(KC_7)); - P( NUMA | RL, SEND(KC_8)); - P( NUMA | RT, SEND(KC_9)); - P( NUMA | RD, SEND(KC_0)); - - - // Symbols and Numbers - P( SYMB | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( - P( SYMB | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) - P( SYMB | ST1 | ST2, SEND(KC_GRV)); // ` - P( SYMB | RR | RF, SEND(KC_LSFT); SEND(KC_3)); // # - P( SYMB | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ - P( SYMB | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! - P( SYMB | LSD, SEND(KC_LSFT); SEND(KC_5)); // % - P( SYMB | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ - P( SYMB | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ - P( SYMB | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { - P( SYMB | LW, SEND(KC_LBRC)); - P( SYMB | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } - P( SYMB | LR, SEND(KC_RBRC)); - P( SYMB | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | - P( SYMB | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ - P( SYMB | RP | RB, SEND(KC_QUOT)); - P( SYMB | RP | RG, SEND(KC_LSFT); SEND(KC_QUOT)); // " - P( SYMB | RF, SEND(KC_KP_PLUS)); - P( SYMB | RR, SEND(KC_LSFT); SEND(KC_7)); // & - P( SYMB | RP, SEND(KC_MINS)); - P( SYMB | RB, SEND(KC_EQL)); - P( SYMB | RL, SEND(KC_SLSH)); - P( SYMB | RG, SEND(KC_COMM)); - P( SYMB | RT, SEND(KC_PAST)); - P( SYMB | RS, SEND(KC_DOT)); - - // Letters - P( LSU | LSD, SEND(KC_A)); - P( LFT | LK, SEND(KC_S)); - P( LP | LW, SEND(KC_D)); - P( LH | LR, SEND(KC_F)); - P( ST1 | ST2, SEND(KC_G)); - P( RF | RR, SEND(KC_H)); - P( RT | RS, SEND(KC_L)); - P( RD | RZ, SEND(KC_SCLN)); - P( RG | RL, SEND(KC_K)); - P( RP | RB, SEND(KC_J)); - P( LSU, SEND(KC_Q)); - P( LSD, SEND(KC_Z)); - P( LFT, SEND(KC_W)); - P( LK, SEND(KC_X)); - P( LP, SEND(KC_E)); - P( LW, SEND(KC_C)); - P( LH, SEND(KC_R)); - P( LR, SEND(KC_V)); - P( ST1, SEND(KC_T)); - P( ST2, SEND(KC_B)); - P( RF, SEND(KC_Y)); - P( RR, SEND(KC_N)); - P( RP, SEND(KC_U)); - P( RB, SEND(KC_M)); - P( RL, SEND(KC_I)); - P( RG, SEND(KC_COMM)); - P( RT, SEND(KC_O)); - P( RS, SEND(KC_DOT)); - P( RD, SEND(KC_P)); - P( RZ, SEND(KC_SLSH)); - - return 0; -} - - -// Don't fuck with this, thanks. -size_t keymapsCount = sizeof(keymaps)/sizeof(keymaps[0]); diff --git a/keyboards/butterstick/keymaps/default/rules.mk b/keyboards/butterstick/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/butterstick/readme.md b/keyboards/butterstick/readme.md deleted file mode 100644 index 8bae8ba5a05..00000000000 --- a/keyboards/butterstick/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# Butter Stick - -![Butter Stick](https://i.redd.it/mvteaomko7s21.jpg) - -A chorded 20% keyboard packing full sized useage into your pocket. More info on [gboards.ca](http://docs.gboards.ca/Meet-Butter-Stick)! - -Keyboard Maintainer: [Germ](https://github.com/germ) -Hardware Availability: [g Heavy Industries](https://www.gboards.ca/product/butter-stick-limited-edition) - -Make example for this keyboard (after setting up your build environment): - - make butterstick:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/butterstick/rules.mk b/keyboards/butterstick/rules.mk deleted file mode 100644 index 68b117bf590..00000000000 --- a/keyboards/butterstick/rules.mk +++ /dev/null @@ -1,19 +0,0 @@ -# MCU name -MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) - -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -DONLYQWERTY -DDEBUG_MATRIX -SRC += sten.c -EXTRAFLAGS += -flto - - -BOOTLOADER = atmel-dfu -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -STENO_ENABLE = yes # Needed for chording - diff --git a/keyboards/butterstick/sten.c b/keyboards/butterstick/sten.c deleted file mode 100644 index a239e388421..00000000000 --- a/keyboards/butterstick/sten.c +++ /dev/null @@ -1,367 +0,0 @@ -#include "sten.h" - -// Chord state -uint32_t cChord = 0; // Current Chord -int chordIndex = 0; // Keys in previousachord -int32_t chordState[32]; // Full Chord history -#define QWERBUF 24 // Size of chords to buffer for output - -bool repeatFlag = false; // Should we repeat? -uint32_t pChord = 0; // Previous Chord -int pChordIndex = 0; // Keys in previousachord -uint32_t pChordState[32]; // Previous chord sate -uint32_t stickyBits = 0; // Or'd with every incoming press - -// Mode state -enum MODE { STENO = 0, QWERTY, COMMAND }; -enum MODE pMode; -bool QWERSTENO = false; -#ifdef ONLYQWERTY -enum MODE cMode = QWERTY; -#else -enum MODE cMode = STENO; -#endif - -// Command State -#define MAX_CMD_BUF 20 -uint8_t CMDLEN = 0; -uint8_t CMDBUF[MAX_CMD_BUF]; - -// Key Repeat state -bool inChord = false; -bool repEngaged = false; -uint16_t repTimer = 0; -#define REP_INIT_DELAY 750 -#define REP_DELAY 25 - -// Mousekeys state -bool inMouse = false; -int8_t mousePress; - -// All processing done at chordUp goes through here -// Note, this is a gutted version of the Georgi sten.h -bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) { - // Check for mousekeys, this is release -#ifdef MOUSEKEY_ENABLE - if (inMouse) { - inMouse = false; - mousekey_off(mousePress); - mousekey_send(); - } -#endif - - // handle command mode - if (cChord == (LSU | LSD | RD | RZ)) { - if (cMode != COMMAND) { // Entering Command Mode - CMDLEN = 0; - pMode = cMode; - cMode = COMMAND; - } else { // Exiting Command Mode - cMode = pMode; - - // Press all and release all - for (int i = 0; i < CMDLEN; i++) { - register_code(CMDBUF[i]); - } - clear_keyboard(); - } - - goto out; - } - - // Handle Gaming Toggle, - if (cChord == (LSU | LSD | LFT | LK | RT | RS | RD | RZ) && keymapsCount > 1) { -#ifndef NO_DEBUG - uprintf("Switching to QMK\n"); -#endif - layer_on(1); - goto out; - } - - // Do QWERTY and Momentary QWERTY - if (cMode == QWERTY || (cMode == COMMAND)) { - processChord(false); - goto out; - } - -out: - cChord = 0; - inChord = false; - chordIndex = 0; - clear_keyboard(); - repEngaged = false; - for (int i = 0; i < 32; i++) - chordState[i] = 0xFFFF; - - return false; -} - -// Update Chord State -bool process_steno_user(uint16_t keycode, keyrecord_t *record) { - // Everything happens in here when steno keys come in. - // Bail on keyup - if (!record->event.pressed) return true; - - // Update key repeat timers - repTimer = timer_read(); - inChord = true; - - // Switch on the press adding to chord - bool pr = record->event.pressed; - switch (keycode) { - // Mods and stuff - case STN_ST1: pr ? (cChord |= (ST1)): (cChord &= ~(ST1)); break; - case STN_ST2: pr ? (cChord |= (ST2)): (cChord &= ~(ST2)); break; - case STN_ST3: pr ? (cChord |= (ST3)): (cChord &= ~(ST3)); break; - case STN_ST4: pr ? (cChord |= (ST4)): (cChord &= ~(ST4)); break; - case STN_FN: pr ? (cChord |= (FN)) : (cChord &= ~(FN)); break; - case STN_PWR: pr ? (cChord |= (PWR)): (cChord &= ~(PWR)); break; - case STN_N1...STN_N6: pr ? (cChord |= (LNO)): (cChord &= ~(LNO)); break; - case STN_N7...STN_NC: pr ? (cChord |= (RNO)): (cChord &= ~(RNO)); break; - - // All the letter keys - case STN_S1: pr ? (cChord |= (LSU)) : (cChord &= ~(LSU)); break; - case STN_S2: pr ? (cChord |= (LSD)) : (cChord &= ~(LSD)); break; - case STN_TL: pr ? (cChord |= (LFT)) : (cChord &= ~(LFT)); break; - case STN_KL: pr ? (cChord |= (LK)) : (cChord &= ~(LK)); break; - case STN_PL: pr ? (cChord |= (LP)) : (cChord &= ~(LP)); break; - case STN_WL: pr ? (cChord |= (LW)) : (cChord &= ~(LW)); break; - case STN_HL: pr ? (cChord |= (LH)) : (cChord &= ~(LH)); break; - case STN_RL: pr ? (cChord |= (LR)) : (cChord &= ~(LR)); break; - case STN_A: pr ? (cChord |= (LA)) : (cChord &= ~(LA)); break; - case STN_O: pr ? (cChord |= (LO)) : (cChord &= ~(LO)); break; - case STN_E: pr ? (cChord |= (RE)) : (cChord &= ~(RE)); break; - case STN_U: pr ? (cChord |= (RU)) : (cChord &= ~(RU)); break; - case STN_FR: pr ? (cChord |= (RF)) : (cChord &= ~(RF)); break; - case STN_RR: pr ? (cChord |= (RR)) : (cChord &= ~(RR)); break; - case STN_PR: pr ? (cChord |= (RP)) : (cChord &= ~(RP)); break; - case STN_BR: pr ? (cChord |= (RB)) : (cChord &= ~(RB)); break; - case STN_LR: pr ? (cChord |= (RL)) : (cChord &= ~(RL)); break; - case STN_GR: pr ? (cChord |= (RG)) : (cChord &= ~(RG)); break; - case STN_TR: pr ? (cChord |= (RT)) : (cChord &= ~(RT)); break; - case STN_SR: pr ? (cChord |= (RS)) : (cChord &= ~(RS)); break; - case STN_DR: pr ? (cChord |= (RD)) : (cChord &= ~(RD)); break; - case STN_ZR: pr ? (cChord |= (RZ)) : (cChord &= ~(RZ)); break; - } - - // Store previous state for fastQWER - if (pr) { - chordState[chordIndex] = cChord; - chordIndex++; - } - - return true; -} -void matrix_scan_user(void) { - // We abuse this for early sending of key - // Key repeat only on QWER/SYMB layers - if (cMode != QWERTY || !inChord) return; - - // Check timers -#ifndef NO_REPEAT - if (repEngaged && timer_elapsed(repTimer) > REP_DELAY) { - // Process Key for report - processChord(false); - - // Send report to host - send_keyboard_report(); - clear_keyboard(); - repTimer = timer_read(); - } - - if (!repEngaged && timer_elapsed(repTimer) > REP_INIT_DELAY) { - repEngaged = true; - } -#endif -}; - -// For Plover NKRO -uint32_t processFakeSteno(bool lookup) { - P( LSU, SEND(KC_Q);); - P( LSD, SEND(KC_A);); - P( LFT, SEND(KC_W);); - P( LP, SEND(KC_E);); - P( LH, SEND(KC_R);); - P( LK, SEND(KC_S);); - P( LW, SEND(KC_D);); - P( LR, SEND(KC_F);); - P( ST1, SEND(KC_T);); - P( ST2, SEND(KC_G);); - P( LA, SEND(KC_C);); - P( LO, SEND(KC_V);); - P( RE, SEND(KC_N);); - P( RU, SEND(KC_M);); - P( ST3, SEND(KC_Y);); - P( ST4, SEND(KC_H);); - P( RF, SEND(KC_U);); - P( RP, SEND(KC_I);); - P( RL, SEND(KC_O);); - P( RT, SEND(KC_P);); - P( RD, SEND(KC_LBRC);); - P( RR, SEND(KC_J);); - P( RB, SEND(KC_K);); - P( RG, SEND(KC_L);); - P( RS, SEND(KC_SCLN);); - P( RZ, SEND(KC_COMM);); - P( LNO, SEND(KC_1);); - P( RNO, SEND(KC_1);); - - return 0; -} - -// Traverse the chord history to a given point -// Returns the mask to use -void processChord(bool useFakeSteno) { - // Save the clean chord state - uint32_t savedChord = cChord; - - // Apply Stick Bits if needed - if (stickyBits != 0) { - cChord |= stickyBits; - for (int i = 0; i <= chordIndex; i++) - chordState[i] |= stickyBits; - } - - // Strip FN - if (cChord & FN) cChord ^= FN; - - // First we test if a whole chord was passsed - // If so we just run it handling repeat logic - if (useFakeSteno && processFakeSteno(true) == cChord) { - processFakeSteno(false); - return; - } else if (processQwerty(true) == cChord) { - processQwerty(false); - // Repeat logic - if (repeatFlag) { - restoreState(); - repeatFlag = false; - processChord(false); - } else { - saveState(cChord); - } - return; - } - - // Iterate through chord picking out the individual - // and longest chords - uint32_t bufChords[QWERBUF]; - int bufLen = 0; - uint32_t mask = 0; - - // We iterate over it multiple times to catch the longest - // chord. Then that gets addded to the mask and re run. - while (savedChord != mask) { - uint32_t test = 0; - uint32_t longestChord = 0; - - for (int i = 0; i <= chordIndex; i++) { - cChord = chordState[i] & ~mask; - if (cChord == 0) - continue; - - // Assume mid parse Sym is new chord - if (i != 0 && test != 0 && (cChord ^ test) == PWR) { - longestChord = test; - break; - } - - // Lock SYM layer in once detected - if (mask & PWR) - cChord |= PWR; - - - // Testing for keycodes - if (useFakeSteno) { - test = processFakeSteno(true); - } else { - test = processQwerty(true); - } - - if (test != 0) { - longestChord = test; - } - } - - mask |= longestChord; - bufChords[bufLen] = longestChord; - bufLen++; - - // That's a loop of sorts, halt processing - if (bufLen >= QWERBUF) { - return; - } - } - - // Now that the buffer is populated, we run it - for (int i = 0; i < bufLen ; i++) { - cChord = bufChords[i]; - if (useFakeSteno) { - processFakeSteno(false); - } else { - processQwerty(false); - } - } - - // Save state in case of repeat - if (!repeatFlag) { - saveState(savedChord); - } - - // Restore cChord for held repeat - cChord = savedChord; - - return; -} -void saveState(uint32_t cleanChord) { - pChord = cleanChord; - pChordIndex = chordIndex; - for (int i = 0; i < 32; i++) - pChordState[i] = chordState[i]; -} -void restoreState() { - cChord = pChord; - chordIndex = pChordIndex; - for (int i = 0; i < 32; i++) - chordState[i] = pChordState[i]; -} - -// Macros for calling from keymap.c -void SEND(uint8_t kc) { - // Send Keycode, Does not work for Quantum Codes - if (cMode == COMMAND && CMDLEN < MAX_CMD_BUF) { -#ifndef NO_DEBUG - uprintf("CMD LEN: %d BUF: %d\n", CMDLEN, MAX_CMD_BUF); -#endif - CMDBUF[CMDLEN] = kc; - CMDLEN++; - } - - if (cMode != COMMAND) register_code(kc); - return; -} -void REPEAT(void) { - if (cMode != QWERTY) - return; - - repeatFlag = true; - return; -} -void SET_STICKY(uint32_t stick) { - stickyBits = stick; - return; -} -void SWITCH_LAYER(int layer) { - if (keymapsCount >= layer) - layer_on(layer); -} -void CLICK_MOUSE(uint8_t kc) { -#ifdef MOUSEKEY_ENABLE - mousekey_on(kc); - mousekey_send(); - - // Store state for later use - inMouse = true; - mousePress = kc; -#endif -} diff --git a/keyboards/butterstick/sten.h b/keyboards/butterstick/sten.h deleted file mode 100644 index 5a9771d9a02..00000000000 --- a/keyboards/butterstick/sten.h +++ /dev/null @@ -1,77 +0,0 @@ -// 2019, g Heavy Industries -// Blessed mother of Christ, please keep this readable -// and protect us from segfaults. For thine is the clock, -// the slave and the master. Until we return from main. -// -// Amen. - -#include QMK_KEYBOARD_H -#include "mousekey.h" -#include "keymap.h" -#include "keymap_steno.h" -#include "wait.h" - -extern size_t keymapsCount; // Total keymaps -extern uint32_t cChord; // Current Chord - -// Function defs -void processChord(bool useFakeSteno); -uint32_t processQwerty(bool lookup); -uint32_t processFakeSteno(bool lookup); -void saveState(uint32_t cChord); -void restoreState(void); - -// Macros for use in keymap.c -void SEND(uint8_t kc); -void REPEAT(void); -void SET_STICKY(uint32_t); -void SWITCH_LAYER(int); -void CLICK_MOUSE(uint8_t); - -// Keymap helper -#define P(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;} - -// Shift to internal representation -// i.e) S(teno)R(ight)F -#define STN(n) (1L< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA17 -#define PRODUCT_ID 0xCA39 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Maple Computing -#define PRODUCT C39 -#define DESCRIPTION A compact 39 key keyboard - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 13 - -#define MATRIX_ROW_PINS { D1, B4, B5 } -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, C6, D2, D3 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/c39/info.json b/keyboards/c39/info.json deleted file mode 100755 index 4ed7f018c8d..00000000000 --- a/keyboards/c39/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "C39", - "url": "", - "maintainer": "Space Cat", - "width": 13.25, - "height": 3, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Back", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"M1", "x":11.25, "y":0}, {"label":"M2", "x":12.25, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Enter", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"M3", "x":11.25, "y":1}, {"label":"M4", "x":12.25, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Fn", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"M5", "x":11.25, "y":2}, {"label":"M6", "x":12.25, "y":2}] - } - } -} \ No newline at end of file diff --git a/keyboards/c39/keymaps/default/config.h b/keyboards/c39/keymaps/default/config.h deleted file mode 100755 index 271f48d0011..00000000000 --- a/keyboards/c39/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/c39/keymaps/default/keymap.c b/keyboards/c39/keymaps/default/keymap.c deleted file mode 100755 index 9de75190d03..00000000000 --- a/keyboards/c39/keymaps/default/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _FN1 1 - -// Defines for task manager and such -#define CALTDEL LCTL(LALT(KC_DEL)) -#define TSKMGR LCTL(LSFT(KC_ESC)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,----------------------------------------------------------------------------. ,-------------. - * | Q | W | E | R | T | Bksp | Y | U | I | O | P | | M1 | M2 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | A | S | D | F | G | Enter| H | J | K | L | ; | | M3 | M4 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | Z | X | C | V | B | FN1 | N | M | , | . | / | | M5 | M6 | - * `----------------------------------------------------------------------------' `-------------' - */ -[_QWERTY] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_1, KC_2, - KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_3, KC_4, - KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_5, KC_6 -), - -/* FN1 - * ,----------------------------------------------------------------------------. ,-------------. - * | 1 | 2 | 3 | 4 | 5 | Bksp | 6 | 7 | 8 | 9 | 0 | | M1 | M2 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | 4 | 5 | 6 | + | | Enter| | | | | | | M3 | M4 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | 7 | 8 | 9 | 0 | | FN1 | | | | | | | M5 | M6 | - * `----------------------------------------------------------------------------' `-------------' - */ -[_FN1] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_BSPC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_1, KC_2, - KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT, _______, _______, _______, _______, _______, KC_3, KC_4, - KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, _______, KC_5, KC_6 -), -}; diff --git a/keyboards/c39/keymaps/default/readme.md b/keyboards/c39/keymaps/default/readme.md deleted file mode 100755 index f5b1b6ac114..00000000000 --- a/keyboards/c39/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for the C39 diff --git a/keyboards/c39/readme.md b/keyboards/c39/readme.md deleted file mode 100755 index 0454f1c12b0..00000000000 --- a/keyboards/c39/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# C39 -======= - -![C39](https://i.imgur.com/KuWIIuW.png) - -A compact 39 key keyboard. - -Keyboard Maintainer: [Maple Computing]() -Hardware Supported: C39 PCB -Hardware Availability: [SpaceCat.design](https://spacecat.design) - -Make example for this keyboard (after setting up your build environment): - - make c39:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/c39/rules.mk b/keyboards/c39/rules.mk deleted file mode 100755 index 8fcb089817c..00000000000 --- a/keyboards/c39/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -RGBLIGHT_ENABLE = no # RGB Enable / Disable diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index 7e9f90853e3..00000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - - - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index 173f7b60542..00000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,923 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c6..00000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/candybar/bootloader_defs.h b/keyboards/candybar/bootloader_defs.h deleted file mode 100644 index 43eb7b2f628..00000000000 --- a/keyboards/candybar/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/candybar/candybar.c b/keyboards/candybar/candybar.c deleted file mode 100644 index c79e536ccc3..00000000000 --- a/keyboards/candybar/candybar.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "candybar.h" - -void matrix_init_kb(void) { - matrix_init_user(); -} diff --git a/keyboards/candybar/candybar.h b/keyboards/candybar/candybar.h deleted file mode 100644 index 262edf3bbb4..00000000000 --- a/keyboards/candybar/candybar.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once -#include "quantum.h" - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, k1d, k1e, k1f, k1g, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ - k30, k31, k32, k35, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }, \ - { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \ - { k30, k31, k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g } \ -} diff --git a/keyboards/candybar/chconf.h b/keyboards/candybar/chconf.h deleted file mode 100644 index 99fa8ce3982..00000000000 --- a/keyboards/candybar/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/candybar/config.h b/keyboards/candybar/config.h deleted file mode 100644 index c1539671301..00000000000 --- a/keyboards/candybar/config.h +++ /dev/null @@ -1,115 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0006 -#define MANUFACTURER The Key Company -#define PRODUCT Candybar -#define DESCRIPTION A compact staggered 40% keyboard with attached numpad - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 17 -#define DIODE_DIRECTION COL2ROW -#define MATRIX_ROW_PINS { A8, A9, A10, A13 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -// #define WS2812_LED_N 2 -// #define RGBLED_NUM WS2812_LED_N -// #define WS2812_TIM_N 2 -// #define WS2812_TIM_CH 2 -// #define PORT_WS2812 GPIOA -// #define PIN_WS2812 1 -// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) -//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP -//#define WS2812_EXTERNAL_PULLUP diff --git a/keyboards/candybar/halconf.h b/keyboards/candybar/halconf.h deleted file mode 100644 index 8b9724b1a30..00000000000 --- a/keyboards/candybar/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/candybar/info.json b/keyboards/candybar/info.json deleted file mode 100644 index 442324ece27..00000000000 --- a/keyboards/candybar/info.json +++ /dev/null @@ -1,210 +0,0 @@ -{ - "keyboard_name": "TKC Candybar", - "url": "", - "maintainer": "terrymathews", - "width": 17, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", - "x":0, - "y":0}, - {"label":"Q", - "x":1, - "y":0}, - {"label":"W", - "x":2, - "y":0}, - {"label":"E", - "x":3, - "y":0}, - {"label":"R", - "x":4, - "y":0}, - {"label":"T", - "x":5, - "y":0}, - {"label":"Y", - "x":6, - "y":0}, - {"label":"U", - "x":7, - "y":0}, - {"label":"I", - "x":8, - "y":0}, - {"label":"O", - "x":9, - "y":0}, - {"label":"P", - "x":10, - "y":0}, - {"label":"Del", - "x":11, - "y":0}, - {"label":"BkSp", - "x":12, - "y":0}, - {"label":"7", - "x":13, - "y":0}, - {"label":"8", - "x":14, - "y":0}, - {"label":"9", - "x":15, - "y":0}, - {"label":"*", - "x":16, - "y":0}, - {"label":"Tab", - "x":0, - "y":1, - "w":1.25}, - {"label":"A", - "x":1.25, - "y":1}, - {"label":"S", - "x":2.25, - "y":1}, - {"label":"D", - "x":3.25, - "y":1}, - {"label":"F", - "x":4.25, - "y":1}, - {"label":"G", - "x":5.25, - "y":1}, - {"label":"H", - "x":6.25, - "y":1}, - {"label":"J", - "x":7.25, - "y":1}, - {"label":"K", - "x":8.25, - "y":1}, - {"label":"L", - "x":9.25, - "y":1}, - {"label":":", - "x":10.25, - "y":1}, - {"label":"Enter", - "x":11.25, - "y":1, - "w":1.75}, - {"label":"4", - "x":13, - "y":1}, - {"label":"5", - "x":14, - "y":1}, - {"label":"6", - "x":15, - "y":1}, - {"label":"-", - "x":16, - "y":1}, - {"label":"Shift", - "x":0, - "y":2, - "w":1.75}, - {"label":"Z", - "x":1.75, - "y":2}, - {"label":"X", - "x":2.75, - "y":2}, - {"label":"C", - "x":3.75, - "y":2}, - {"label":"V", - "x":4.75, - "y":2}, - {"label":"B", - "x":5.75, - "y":2}, - {"label":"N", - "x":6.75, - "y":2}, - {"label":"M", - "x":7.75, - "y":2}, - {"label":"<", - "x":8.75, - "y":2}, - {"label":">", - "x":9.75, - "y":2}, - {"label":"Shift", - "x":10.75, - "y":2, - "w":1.25}, - {"label":"↑", - "x":12, - "y":2}, - {"label":"1", - "x":13, - "y":2}, - {"label":"2", - "x":14, - "y":2}, - {"label":"3", - "x":15, - "y":2}, - {"label":"+", - "x":16, - "y":2}, - {"label":"Ctrl", - "x":0, - "y":3, - "w":1.25}, - {"label":"GUI", - "x":1.25, - "y":3, - "w":1.25}, - {"label":"Alt", - "x":2.5, - "y":3, - "w":1.25}, - {"x":3.75, - "y":3, - "w":1.75}, - {"x":5.5, - "y":3, - "w":1}, - {"label":"Backspace", - "x":6.5, - "y":3, - "w":2.25}, - {"label":"Menu", - "x":8.75, - "y":3, - "w":1.25}, - {"label":"Fn", - "x":10, - "y":3}, - {"label":"←", - "x":11, - "y":3}, - {"label":"↓", - "x":12, - "y":3}, - {"label":"→", - "x":13, - "y":3}, - {"label":"0", - "x":14, - "y":3}, - {"label":".", - "x":15, - "y":3}, - {"label":"Enter", - "x":16, - "y":3}] - } - } -} \ No newline at end of file diff --git a/keyboards/candybar/keymaps/default/keymap.c b/keyboards/candybar/keymaps/default/keymap.c deleted file mode 100644 index 8f4cc08c746..00000000000 --- a/keyboards/candybar/keymaps/default/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \ - KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \ - KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \ - KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \ - KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \ - KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT), -}; diff --git a/keyboards/candybar/mcuconf.h b/keyboards/candybar/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/candybar/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/candybar/readme.md b/keyboards/candybar/readme.md deleted file mode 100644 index 6e0fa028571..00000000000 --- a/keyboards/candybar/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -The Key Company Candybar -=== - -![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501) - - -The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller. - -Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/) -Hardware Supported: TKC Candybar -Hardware Availability: Via GB - - -Make example for this keyboard (after setting up your build environment): - - make candybar:default:dfu-util - -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/candybar/rules.mk b/keyboards/candybar/rules.mk deleted file mode 100644 index a0365a20b5f..00000000000 --- a/keyboards/candybar/rules.mk +++ /dev/null @@ -1,52 +0,0 @@ -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB - -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY - -# Cortex version -MCU = cortex-m0 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 - -# Build Options -# comment out to disable the options. -# -# EXTRAFLAGS+=-flto -LINK_TIME_OPTIMIZATION_ENABLE = yes -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no -SERIAL_LINK_ENABLE = no diff --git a/keyboards/cannonkeys/bluepill/keyboard.c b/keyboards/cannonkeys/bluepill/keyboard.c deleted file mode 100644 index 865628eccde..00000000000 --- a/keyboards/cannonkeys/bluepill/keyboard.c +++ /dev/null @@ -1,30 +0,0 @@ -#include "ch.h" -#include "hal.h" -#include "led_custom.h" -#include "util.h" -#include "quantum.h" - -#ifdef BOARD_GENERIC_STM32_F103 -#define LED_ON() do { palClearPad(GPIOC, 13) ;} while (0) -#define LED_OFF() do { palSetPad(GPIOC, 13); } while (0) -#define LED_TGL() do { palTogglePad(GPIOC, 13); } while (0) -#endif - -void matrix_init_kb(void){ - /* MOSI pin*/ - palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - LED_ON(); - wait_ms(500); - LED_OFF(); - -#ifdef RGBLIGHT_ENABLE - leds_init(); -#endif -} - -void matrix_scan_kb(void) -{ - #ifdef RGBLIGHT_ENABLE - rgblight_task(); - #endif -} diff --git a/keyboards/cannonkeys/bluepill/led.c b/keyboards/cannonkeys/bluepill/led.c deleted file mode 100644 index a9ede5bbaa8..00000000000 --- a/keyboards/cannonkeys/bluepill/led.c +++ /dev/null @@ -1,257 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" -#include "backlight.h" -#include "led.h" -#include "led_custom.h" -#include "printf.h" - -static void breathing_callback(PWMDriver *pwmp); - -static PWMConfig pwmCFG = { - 0xFFFF, /* PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - NULL, /* No Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -static PWMConfig pwmCFG_breathing = { - 0xFFFF, /* 10kHz PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - breathing_callback, /* Breathing Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - - -void backlight_init_ports(void) { - printf("backlight_init_ports()\n"); - #ifdef BACKLIGHT_ENABLE - - palSetPadMode(GPIOA, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - pwmStart(&PWMD1, &pwmCFG); - pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1, 0xFFFF,cie_lightness(0xFFFF))); - #endif -} - -void backlight_set(uint8_t level) { - printf("backlight_set(%d)\n", level); - #ifdef BACKLIGHT_ENABLE - uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); - printf("duty: (%d)\n", duty); - if (level == 0) { - // Turn backlight off - pwmDisableChannel(&PWMD1, 0); - } else { - // Turn backlight on - if(!is_breathing()){ - pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1,0xFFFF,duty)); - } - } - #endif -} - - -uint8_t backlight_tick = 0; - -void backlight_task(void) { -} - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -bool is_breathing(void) { - return PWMD1.config == &pwmCFG_breathing; -} - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) - - -void breathing_interrupt_enable(void){ - pwmStop(&PWMD1); - printf("starting with callback\n"); - pwmStart(&PWMD1, &pwmCFG_breathing); - chSysLockFromISR(); - pwmEnablePeriodicNotification(&PWMD1); - pwmEnableChannelI( - &PWMD1, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD1, - 0xFFFF, - 0xFFFF - ) - ); - chSysUnlockFromISR(); -} - -void breathing_interrupt_disable(void){ - pwmStop(&PWMD1); - printf("starting without callback\n"); - pwmStart(&PWMD1, &pwmCFG); -} - -void breathing_enable(void) -{ - printf("breathing_enable()\n"); - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - breathing_interrupt_enable(); -} - -void breathing_pulse(void) -{ - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - breathing_interrupt_enable(); -} - -void breathing_disable(void) -{ - printf("breathing_disable()\n"); - breathing_interrupt_disable(); - // Restore backlight level - backlight_set(get_backlight_level()); -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()){ - printf("disable breathing\n"); - breathing_disable(); - } else { - printf("enable breathing\n"); - breathing_enable(); - } -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -static void breathing_callback(PWMDriver *pwmp) -{ - (void)pwmp; - uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 256); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - breathing_interrupt_disable(); - } - - uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); - - chSysLockFromISR(); - pwmEnableChannelI( - &PWMD1, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD1, - 0xFFFF, - duty - ) - ); - chSysUnlockFromISR(); -} - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1< 1tick is 0.32us (2.25 MHz) -}; - - /* - * Function used to initialize the driver. - * - * Starts by shutting off all the LEDs. - * Then gets access on the LED_SPI driver. - * May eventually launch an animation on the LEDs (e.g. a thread setting the - * txbuff values) - */ -void leds_init(void){ - /* MOSI pin*/ - palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - for(int i = 0; i < RESET_SIZE; i++) - txbuf[DATA_SIZE+i] = 0x00; - for (int i=0; i - - - - resources/gencfg/processors/boards/stm32f0xx/templates - .. - 3.0.x - - ST STM32F072B-Discovery - ST_STM32F072B_DISCOVERY - - STM32F072xB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/keyboards/cannonkeys/instant60/bootloader_defs.h b/keyboards/cannonkeys/instant60/bootloader_defs.h deleted file mode 100644 index 02c48c4e6dc..00000000000 --- a/keyboards/cannonkeys/instant60/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h deleted file mode 100644 index 99fa8ce3982..00000000000 --- a/keyboards/cannonkeys/instant60/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/instant60/config.h b/keyboards/cannonkeys/instant60/config.h deleted file mode 100644 index 095384fb9eb..00000000000 --- a/keyboards/cannonkeys/instant60/config.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x1600 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER CannonKeys -#define PRODUCT Instant60 -#define DESCRIPTION Instant 60 Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 } -#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 } -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_LEVELS 6 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGBLIGHT_ANIMATIONS - -#define WS2812_LED_N 14 -#define RGBLED_NUM WS2812_LED_N -#define PORT_WS2812 GPIOB -#define PIN_WS2812 15 -#define WS2812_SPI SPID2 - - -// EEPROM usage -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x02 -#define EEPROM_VERSION_ADDR 34 - - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 -// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635 -// start + layer * rows * col * 2 -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -#define EEPROM_CUSTOM_BACKLIGHT 636 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/instant60/halconf.h b/keyboards/cannonkeys/instant60/halconf.h deleted file mode 100644 index 38743e0904f..00000000000 --- a/keyboards/cannonkeys/instant60/halconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/instant60/info.json b/keyboards/cannonkeys/instant60/info.json deleted file mode 100644 index 73a64b8b328..00000000000 --- a/keyboards/cannonkeys/instant60/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "Instant60", - "url": "https://cannonkeys.com", - "maintainer": "awkannan", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_tsangan": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - } - } -} diff --git a/keyboards/cannonkeys/instant60/instant60.c b/keyboards/cannonkeys/instant60/instant60.c deleted file mode 100644 index 25b7099b0b1..00000000000 --- a/keyboards/cannonkeys/instant60/instant60.c +++ /dev/null @@ -1 +0,0 @@ -#include "instant60.h" diff --git a/keyboards/cannonkeys/instant60/instant60.h b/keyboards/cannonkeys/instant60/instant60.h deleted file mode 100644 index 67d5ba98fe2..00000000000 --- a/keyboards/cannonkeys/instant60/instant60.h +++ /dev/null @@ -1,47 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define KNO KC_NO - -#define LAYOUT_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K40, K41, K42, K45, K49, K4A, K4B, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KNO}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, KNO }, \ - { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, K4A, K4B, KNO, KNO, K4E } \ -} - -#define LAYOUT_tsangan( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3E,\ - K40, K41, K42, K45, K49, K4B, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, K3E }, \ - { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, KNO, K4B, KNO, KNO, K4E } \ -} - -#define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3E,\ - K40, K41, K42, K45, K49, K4A, K4B, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, K3E }, \ - { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, K4A, K4B, KNO, KNO, K4E } \ -} diff --git a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c deleted file mode 100644 index 7753181a489..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_ansi( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL - ), - - [_FN1] = LAYOUT_ansi( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_GRV, _______, _______, _______, _______, _______, _______, RESET - ) -}; diff --git a/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c b/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c deleted file mode 100644 index c16c506301f..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_tsangan( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN1),\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), - - [_FN1] = LAYOUT_tsangan( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______,\ - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ - _______, _______, _______, _______, _______, _______, RESET - ) -}; diff --git a/keyboards/cannonkeys/instant60/keymaps/via/keymap.c b/keyboards/cannonkeys/instant60/keymaps/via/keymap.c deleted file mode 100644 index 9be7d187e45..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/via/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL - ), - - [_FN1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, RESET - ) -}; diff --git a/keyboards/cannonkeys/instant60/keymaps/via/rules.mk b/keyboards/cannonkeys/instant60/keymaps/via/rules.mk deleted file mode 100644 index d12497792d5..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/via/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# rules.mk overrides to enable VIA - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes - diff --git a/keyboards/cannonkeys/instant60/keymaps/via_standard/keymap.c b/keyboards/cannonkeys/instant60/keymaps/via_standard/keymap.c deleted file mode 100644 index b182ac5f4f0..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/via_standard/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL - ), - - [_FN1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, RESET - ) -}; diff --git a/keyboards/cannonkeys/instant60/keymaps/via_standard/rules.mk b/keyboards/cannonkeys/instant60/keymaps/via_standard/rules.mk deleted file mode 100644 index d12497792d5..00000000000 --- a/keyboards/cannonkeys/instant60/keymaps/via_standard/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# rules.mk overrides to enable VIA - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes - diff --git a/keyboards/cannonkeys/instant60/mcuconf.h b/keyboards/cannonkeys/instant60/mcuconf.h deleted file mode 100644 index 048eb4df650..00000000000 --- a/keyboards/cannonkeys/instant60/mcuconf.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF -// #define STM32F070xB - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/instant60/readme.md b/keyboards/cannonkeys/instant60/readme.md deleted file mode 100644 index 9cd91e9516e..00000000000 --- a/keyboards/cannonkeys/instant60/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Instant60 - -Instant60 Keyboard - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: STM32F072CBT6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/instant60:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk deleted file mode 100644 index cd366c76aa7..00000000000 --- a/keyboards/cannonkeys/instant60/rules.mk +++ /dev/null @@ -1,56 +0,0 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# - -# project specific files -VPATH += keyboards/cannonkeys/stm32f072 -SRC = keyboard.c \ - led.c - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = no # Custom matrix file -# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason -RGBLIGHT_ENABLE = yes - -# RAW_ENABLE = yes -# DYNAMIC_KEYMAP_ENABLE = yes - diff --git a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.c b/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 8c5a87f35f8..00000000000 --- a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.h b/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 9427adabf11..00000000000 --- a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.mk b/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/cannonkeys/ortho48/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/cannonkeys/ortho48/bootloader_defs.h b/keyboards/cannonkeys/ortho48/bootloader_defs.h deleted file mode 100644 index 6b8fa9f727c..00000000000 --- a/keyboards/cannonkeys/ortho48/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/ortho48/chconf.h b/keyboards/cannonkeys/ortho48/chconf.h deleted file mode 100644 index bbd9b2da62d..00000000000 --- a/keyboards/cannonkeys/ortho48/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho48/config.h b/keyboards/cannonkeys/ortho48/config.h deleted file mode 100644 index 497e08bcf5e..00000000000 --- a/keyboards/cannonkeys/ortho48/config.h +++ /dev/null @@ -1,80 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x0248 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER QMK -#define PRODUCT Ortho48 -#define DESCRIPTION Ortho48 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14} -#define MATRIX_ROW_PINS { B12, C13, A2, A1 } -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_LEVELS 6 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGBLIGHT_ANIMATIONS - -#define WS2812_LED_N 9 -#define RGBLED_NUM WS2812_LED_N -#define PORT_WS2812 GPIOB -#define PIN_WS2812 15 -#define WS2812_SPI SPID2 - - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/ortho48/halconf.h b/keyboards/cannonkeys/ortho48/halconf.h deleted file mode 100644 index 72879a575b9..00000000000 --- a/keyboards/cannonkeys/ortho48/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho48/info.json b/keyboards/cannonkeys/ortho48/info.json deleted file mode 100644 index 0e834245a11..00000000000 --- a/keyboards/cannonkeys/ortho48/info.json +++ /dev/null @@ -1,112 +0,0 @@ -{ - "keyboard_name": "Ortho48", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x12": { - "layout": [ - {"label":"Tab", "x":0, "y":0}, - {"label":"Q", "x":1, "y":0}, - {"label":"W", "x":2, "y":0}, - {"label":"E", "x":3, "y":0}, - {"label":"R", "x":4, "y":0}, - {"label":"T", "x":5, "y":0}, - {"label":"Y", "x":6, "y":0}, - {"label":"U", "x":7, "y":0}, - {"label":"I", "x":8, "y":0}, - {"label":"O", "x":9, "y":0}, - {"label":"P", "x":10, "y":0}, - {"label":"Delete", "x":11, "y":0}, - {"label":"Esc", "x":0, "y":1}, - {"label":"A", "x":1, "y":1}, - {"label":"S", "x":2, "y":1}, - {"label":"D", "x":3, "y":1}, - {"label":"F", "x":4, "y":1}, - {"label":"G", "x":5, "y":1}, - {"label":"H", "x":6, "y":1}, - {"label":"J", "x":7, "y":1}, - {"label":"K", "x":8, "y":1}, - {"label":"L", "x":9, "y":1}, - {"label":";", "x":10, "y":1}, - {"label":"'", "x":11, "y":1}, - {"label":"Shift", "x":0, "y":2}, - {"label":"Z", "x":1, "y":2}, - {"label":"X", "x":2, "y":2}, - {"label":"C", "x":3, "y":2}, - {"label":"V", "x":4, "y":2}, - {"label":"B", "x":5, "y":2}, - {"label":"N", "x":6, "y":2}, - {"label":"M", "x":7, "y":2}, - {"label":",", "x":8, "y":2}, - {"label":".", "x":9, "y":2}, - {"label":"/", "x":10, "y":2}, - {"label":"Enter", "x":11, "y":2}, - {"label":"Fn", "x":0, "y":3}, - {"label":"Ctrl", "x":1, "y":3}, - {"label":"Alt", "x":2, "y":3}, - {"label":"Meta", "x":3, "y":3}, - {"label":"Lower", "x":4, "y":3}, - {"label":"Space", "x":5, "y":3}, - {"label":"Space", "x":6, "y":3}, - {"label":"Raise", "x":7, "y":3}, - {"label":"Left", "x":8, "y":3}, - {"label":"Down", "x":9, "y":3}, - {"label":"Up", "x":10, "y":3}, - {"label":"Right", "x":11, "y":3} - ] - }, - "LAYOUT_1x2uC": { - "layout": [ - {"label":"Tab", "x":0, "y":0}, - {"label":"Q", "x":1, "y":0}, - {"label":"W", "x":2, "y":0}, - {"label":"E", "x":3, "y":0}, - {"label":"R", "x":4, "y":0}, - {"label":"T", "x":5, "y":0}, - {"label":"Y", "x":6, "y":0}, - {"label":"U", "x":7, "y":0}, - {"label":"I", "x":8, "y":0}, - {"label":"O", "x":9, "y":0}, - {"label":"P", "x":10, "y":0}, - {"label":"Delete", "x":11, "y":0}, - {"label":"Esc", "x":0, "y":1}, - {"label":"A", "x":1, "y":1}, - {"label":"S", "x":2, "y":1}, - {"label":"D", "x":3, "y":1}, - {"label":"F", "x":4, "y":1}, - {"label":"G", "x":5, "y":1}, - {"label":"H", "x":6, "y":1}, - {"label":"J", "x":7, "y":1}, - {"label":"K", "x":8, "y":1}, - {"label":"L", "x":9, "y":1}, - {"label":";", "x":10, "y":1}, - {"label":"'", "x":11, "y":1}, - {"label":"Shift", "x":0, "y":2}, - {"label":"Z", "x":1, "y":2}, - {"label":"X", "x":2, "y":2}, - {"label":"C", "x":3, "y":2}, - {"label":"V", "x":4, "y":2}, - {"label":"B", "x":5, "y":2}, - {"label":"N", "x":6, "y":2}, - {"label":"M", "x":7, "y":2}, - {"label":",", "x":8, "y":2}, - {"label":".", "x":9, "y":2}, - {"label":"/", "x":10, "y":2}, - {"label":"Enter", "x":11, "y":2}, - {"label":"Fn", "x":0, "y":3}, - {"label":"Ctrl", "x":1, "y":3}, - {"label":"Alt", "x":2, "y":3}, - {"label":"Meta", "x":3, "y":3}, - {"label":"Lower", "x":4, "y":3}, - {"label":"Space", "x":5, "y":3, "w":2}, - {"label":"Raise", "x":7, "y":3}, - {"label":"Left", "x":8, "y":3}, - {"label":"Down", "x":9, "y":3}, - {"label":"Up", "x":10, "y":3}, - {"label":"Right", "x":11, "y":3} - ] - } - } -} diff --git a/keyboards/cannonkeys/ortho48/keymaps/default/keymap.c b/keyboards/cannonkeys/ortho48/keymaps/default/keymap.c deleted file mode 100644 index 2c3bc80c5d4..00000000000 --- a/keyboards/cannonkeys/ortho48/keymaps/default/keymap.c +++ /dev/null @@ -1,89 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _RAISE 1 -#define _LOWER 2 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_BASE] = LAYOUT_ortho_4x12( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT_ortho_4x12( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT_ortho_4x12( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - RGB_TOG, RGB_MOD, BL_INC, BL_DEC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY -), -}; diff --git a/keyboards/cannonkeys/ortho48/ld/MKL26Z64.ld b/keyboards/cannonkeys/ortho48/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/cannonkeys/ortho48/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/ortho48/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/cannonkeys/ortho48/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef6016..00000000000 --- a/keyboards/cannonkeys/ortho48/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/ortho48/mcuconf.h b/keyboards/cannonkeys/ortho48/mcuconf.h deleted file mode 100644 index fced27289e0..00000000000 --- a/keyboards/cannonkeys/ortho48/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/ortho48/ortho48.c b/keyboards/cannonkeys/ortho48/ortho48.c deleted file mode 100644 index fe38f020071..00000000000 --- a/keyboards/cannonkeys/ortho48/ortho48.c +++ /dev/null @@ -1,3 +0,0 @@ - -#include "ortho48.h" - diff --git a/keyboards/cannonkeys/ortho48/ortho48.h b/keyboards/cannonkeys/ortho48/ortho48.h deleted file mode 100644 index 1e51c37af7e..00000000000 --- a/keyboards/cannonkeys/ortho48/ortho48.h +++ /dev/null @@ -1,29 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_1x2uC( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35 , k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, KC_NO, k37, k38, k39, k3a, k3b } \ -} - -#define LAYOUT_ortho_4x12( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} diff --git a/keyboards/cannonkeys/ortho48/readme.md b/keyboards/cannonkeys/ortho48/readme.md deleted file mode 100644 index ba5516a3413..00000000000 --- a/keyboards/cannonkeys/ortho48/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Ortho 48 - -A Blue Pill STM32F103C8T6-based 12x4 ortholinear keyboard. - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: Blue Pill STM32F103C8T6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/ortho48:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/ortho48/rules.mk b/keyboards/cannonkeys/ortho48/rules.mk deleted file mode 100644 index 2e483a8c2cc..00000000000 --- a/keyboards/cannonkeys/ortho48/rules.mk +++ /dev/null @@ -1,55 +0,0 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes - -LAYOUTS = ortho_4x12 diff --git a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.c b/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 8c5a87f35f8..00000000000 --- a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.h b/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 9427adabf11..00000000000 --- a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.mk b/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/cannonkeys/ortho60/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/cannonkeys/ortho60/bootloader_defs.h b/keyboards/cannonkeys/ortho60/bootloader_defs.h deleted file mode 100644 index 6b8fa9f727c..00000000000 --- a/keyboards/cannonkeys/ortho60/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/ortho60/chconf.h b/keyboards/cannonkeys/ortho60/chconf.h deleted file mode 100644 index bbd9b2da62d..00000000000 --- a/keyboards/cannonkeys/ortho60/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho60/config.h b/keyboards/cannonkeys/ortho60/config.h deleted file mode 100644 index 9b85952d789..00000000000 --- a/keyboards/cannonkeys/ortho60/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER QMK -#define PRODUCT Ortho60 -#define DESCRIPTION Ortho60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 - -#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0 } -#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 } -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_LEVELS 6 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGBLIGHT_ANIMATIONS - -#define WS2812_LED_N 16 -#define RGBLED_NUM WS2812_LED_N -#define PORT_WS2812 GPIOB -#define PIN_WS2812 15 -#define WS2812_SPI SPID2 - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/ortho60/halconf.h b/keyboards/cannonkeys/ortho60/halconf.h deleted file mode 100644 index 72879a575b9..00000000000 --- a/keyboards/cannonkeys/ortho60/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho60/info.json b/keyboards/cannonkeys/ortho60/info.json deleted file mode 100644 index b94bfc7b538..00000000000 --- a/keyboards/cannonkeys/ortho60/info.json +++ /dev/null @@ -1,136 +0,0 @@ -{ - "keyboard_name": "Ortho60", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 5, - "layouts": { - "LAYOUT_ortho_5x12": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"Backspace", "x":11, "y":0}, - {"label":"Tab", "x":0, "y":1}, - {"label":"Q", "x":1, "y":1}, - {"label":"W", "x":2, "y":1}, - {"label":"E", "x":3, "y":1}, - {"label":"R", "x":4, "y":1}, - {"label":"T", "x":5, "y":1}, - {"label":"Y", "x":6, "y":1}, - {"label":"U", "x":7, "y":1}, - {"label":"I", "x":8, "y":1}, - {"label":"O", "x":9, "y":1}, - {"label":"P", "x":10, "y":1}, - {"label":"Delete", "x":11, "y":1}, - {"label":"Esc", "x":0, "y":2}, - {"label":"A", "x":1, "y":2}, - {"label":"S", "x":2, "y":2}, - {"label":"D", "x":3, "y":2}, - {"label":"F", "x":4, "y":2}, - {"label":"G", "x":5, "y":2}, - {"label":"H", "x":6, "y":2}, - {"label":"J", "x":7, "y":2}, - {"label":"K", "x":8, "y":2}, - {"label":"L", "x":9, "y":2}, - {"label":";", "x":10, "y":2}, - {"label":"'", "x":11, "y":2}, - {"label":"Shift", "x":0, "y":3}, - {"label":"Z", "x":1, "y":3}, - {"label":"X", "x":2, "y":3}, - {"label":"C", "x":3, "y":3}, - {"label":"V", "x":4, "y":3}, - {"label":"B", "x":5, "y":3}, - {"label":"N", "x":6, "y":3}, - {"label":"M", "x":7, "y":3}, - {"label":",", "x":8, "y":3}, - {"label":".", "x":9, "y":3}, - {"label":"/", "x":10, "y":3}, - {"label":"Enter", "x":11, "y":3}, - {"label":"Fn", "x":0, "y":4}, - {"label":"Ctrl", "x":1, "y":4}, - {"label":"Alt", "x":2, "y":4}, - {"label":"Meta", "x":3, "y":4}, - {"label":"Lower", "x":4, "y":4}, - {"label":"Space", "x":5, "y":4}, - {"label":"Space", "x":6, "y":4}, - {"label":"Raise", "x":7, "y":4}, - {"label":"Left", "x":8, "y":4}, - {"label":"Down", "x":9, "y":4}, - {"label":"Up", "x":10, "y":4}, - {"label":"Right", "x":11, "y":4} - ] - }, - "LAYOUT_1x2uC": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"Backspace", "x":11, "y":0}, - {"label":"Tab", "x":0, "y":1}, - {"label":"Q", "x":1, "y":1}, - {"label":"W", "x":2, "y":1}, - {"label":"E", "x":3, "y":1}, - {"label":"R", "x":4, "y":1}, - {"label":"T", "x":5, "y":1}, - {"label":"Y", "x":6, "y":1}, - {"label":"U", "x":7, "y":1}, - {"label":"I", "x":8, "y":1}, - {"label":"O", "x":9, "y":1}, - {"label":"P", "x":10, "y":1}, - {"label":"Delete", "x":11, "y":1}, - {"label":"Esc", "x":0, "y":2}, - {"label":"A", "x":1, "y":2}, - {"label":"S", "x":2, "y":2}, - {"label":"D", "x":3, "y":2}, - {"label":"F", "x":4, "y":2}, - {"label":"G", "x":5, "y":2}, - {"label":"H", "x":6, "y":2}, - {"label":"J", "x":7, "y":2}, - {"label":"K", "x":8, "y":2}, - {"label":"L", "x":9, "y":2}, - {"label":";", "x":10, "y":2}, - {"label":"'", "x":11, "y":2}, - {"label":"Shift", "x":0, "y":3}, - {"label":"Z", "x":1, "y":3}, - {"label":"X", "x":2, "y":3}, - {"label":"C", "x":3, "y":3}, - {"label":"V", "x":4, "y":3}, - {"label":"B", "x":5, "y":3}, - {"label":"N", "x":6, "y":3}, - {"label":"M", "x":7, "y":3}, - {"label":",", "x":8, "y":3}, - {"label":".", "x":9, "y":3}, - {"label":"/", "x":10, "y":3}, - {"label":"Enter", "x":11, "y":3}, - {"label":"Fn", "x":0, "y":4}, - {"label":"Ctrl", "x":1, "y":4}, - {"label":"Alt", "x":2, "y":4}, - {"label":"Meta", "x":3, "y":4}, - {"label":"Lower", "x":4, "y":4}, - {"label":"Space", "x":5, "y":4, "w":2}, - {"label":"Raise", "x":7, "y":4}, - {"label":"Left", "x":8, "y":4}, - {"label":"Down", "x":9, "y":4}, - {"label":"Up", "x":10, "y":4}, - {"label":"Right", "x":11, "y":4} - ] - } - } -} diff --git a/keyboards/cannonkeys/ortho60/keymaps/default/keymap.c b/keyboards/cannonkeys/ortho60/keymaps/default/keymap.c deleted file mode 100644 index 56caa4dc84f..00000000000 --- a/keyboards/cannonkeys/ortho60/keymaps/default/keymap.c +++ /dev/null @@ -1,98 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _RAISE 1 -#define _LOWER 2 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_BASE] = LAYOUT_ortho_5x12( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT_ortho_5x12( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \ - RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT_ortho_5x12( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \ - RGB_TOG, RGB_MOD, BL_INC, BL_DEC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -) -}; diff --git a/keyboards/cannonkeys/ortho60/ld/MKL26Z64.ld b/keyboards/cannonkeys/ortho60/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/cannonkeys/ortho60/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/cannonkeys/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef6016..00000000000 --- a/keyboards/cannonkeys/ortho60/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/ortho60/mcuconf.h b/keyboards/cannonkeys/ortho60/mcuconf.h deleted file mode 100644 index fced27289e0..00000000000 --- a/keyboards/cannonkeys/ortho60/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/ortho60/ortho60.c b/keyboards/cannonkeys/ortho60/ortho60.c deleted file mode 100644 index f917ef96f94..00000000000 --- a/keyboards/cannonkeys/ortho60/ortho60.c +++ /dev/null @@ -1,3 +0,0 @@ - -#include "ortho60.h" - diff --git a/keyboards/cannonkeys/ortho60/ortho60.h b/keyboards/cannonkeys/ortho60/ortho60.h deleted file mode 100644 index 0f3ae127aad..00000000000 --- a/keyboards/cannonkeys/ortho60/ortho60.h +++ /dev/null @@ -1,33 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_1x2uC( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ - k40, k41, k42, k43, k44, k45 , k47, k48, k49, k4a, k4b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ - { k40, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4a, k4b }, \ -} - -#define LAYOUT_ortho_5x12( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b }, \ -} diff --git a/keyboards/cannonkeys/ortho60/readme.md b/keyboards/cannonkeys/ortho60/readme.md deleted file mode 100644 index c3fdbccc5d3..00000000000 --- a/keyboards/cannonkeys/ortho60/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Ortho 60 - -A Blue Pill STM32F103C8T6-based 12x5 ortholinear keyboard. - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: Blue Pill STM32F103C8T6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/ortho60:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/ortho60/rules.mk b/keyboards/cannonkeys/ortho60/rules.mk deleted file mode 100644 index 359f447a9cf..00000000000 --- a/keyboards/cannonkeys/ortho60/rules.mk +++ /dev/null @@ -1,55 +0,0 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes - -LAYOUTS = ortho_5x12 diff --git a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.c b/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 8c5a87f35f8..00000000000 --- a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.h b/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 9427adabf11..00000000000 --- a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.mk b/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/cannonkeys/practice60/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/cannonkeys/practice60/bootloader_defs.h b/keyboards/cannonkeys/practice60/bootloader_defs.h deleted file mode 100644 index 6b8fa9f727c..00000000000 --- a/keyboards/cannonkeys/practice60/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/practice60/chconf.h b/keyboards/cannonkeys/practice60/chconf.h deleted file mode 100644 index bbd9b2da62d..00000000000 --- a/keyboards/cannonkeys/practice60/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice60/config.h b/keyboards/cannonkeys/practice60/config.h deleted file mode 100644 index c015bb74652..00000000000 --- a/keyboards/cannonkeys/practice60/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER QMK -#define PRODUCT Practice 60 -#define DESCRIPTION Practice 60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 } -#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 } -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_LEVELS 6 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGBLIGHT_ANIMATIONS - -#define WS2812_LED_N 9 -#define RGBLED_NUM WS2812_LED_N -#define PORT_WS2812 GPIOB -#define PIN_WS2812 15 -#define WS2812_SPI SPID2 - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/practice60/halconf.h b/keyboards/cannonkeys/practice60/halconf.h deleted file mode 100644 index 72879a575b9..00000000000 --- a/keyboards/cannonkeys/practice60/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice60/info.json b/keyboards/cannonkeys/practice60/info.json deleted file mode 100644 index cffbcf49246..00000000000 --- a/keyboards/cannonkeys/practice60/info.json +++ /dev/null @@ -1,74 +0,0 @@ -{ - "keyboard_name": "Practice 60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_ansi": { - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"\\", "x":13.5, "y":1, "w":1.5}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":2.75}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - {"label":"GUI", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"label":"Space", "x":3.75, "y":4, "w":6.25}, - {"label":"Alt", "x":10, "y":4, "w":1.25}, - {"label":"GUI", "x":11.25, "y":4, "w":1.25}, - {"label":"Menu", "x":12.5, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} - ] - } - } -} diff --git a/keyboards/cannonkeys/practice60/keymaps/default/keymap.c b/keyboards/cannonkeys/practice60/keymaps/default/keymap.c deleted file mode 100644 index 66ebe0646d5..00000000000 --- a/keyboards/cannonkeys/practice60/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_60_ansi( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL - ), - - [_FN1] = LAYOUT_60_ansi( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_GRV, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/practice60/ld/MKL26Z64.ld b/keyboards/cannonkeys/practice60/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/cannonkeys/practice60/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/practice60/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/cannonkeys/practice60/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef6016..00000000000 --- a/keyboards/cannonkeys/practice60/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/practice60/mcuconf.h b/keyboards/cannonkeys/practice60/mcuconf.h deleted file mode 100644 index fced27289e0..00000000000 --- a/keyboards/cannonkeys/practice60/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/practice60/practice60.c b/keyboards/cannonkeys/practice60/practice60.c deleted file mode 100644 index d2cf47deb84..00000000000 --- a/keyboards/cannonkeys/practice60/practice60.c +++ /dev/null @@ -1,2 +0,0 @@ - -#include "practice60.h" diff --git a/keyboards/cannonkeys/practice60/practice60.h b/keyboards/cannonkeys/practice60/practice60.h deleted file mode 100644 index 5ebba8fb84d..00000000000 --- a/keyboards/cannonkeys/practice60/practice60.h +++ /dev/null @@ -1,17 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K40, K41, K42, K43, K49, K4A, K4B, K4C \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, KC_NO }, \ - { K40, K41, K42, K43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, KC_NO } \ -} diff --git a/keyboards/cannonkeys/practice60/readme.md b/keyboards/cannonkeys/practice60/readme.md deleted file mode 100644 index 044aadf6e98..00000000000 --- a/keyboards/cannonkeys/practice60/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Practice 60 - -A Blue Pill STM32F103C8T6-based 60% ANSI board. - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: Blue Pill STM32F103C8T6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/practice60:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/practice60/rules.mk b/keyboards/cannonkeys/practice60/rules.mk deleted file mode 100644 index cf8554c0c6f..00000000000 --- a/keyboards/cannonkeys/practice60/rules.mk +++ /dev/null @@ -1,57 +0,0 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes - -LAYOUTS = 60_ansi - -DEFAULT_FOLDER = cannonkeys/practice60 diff --git a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c b/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 8c5a87f35f8..00000000000 --- a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h b/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 9427adabf11..00000000000 --- a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk b/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/cannonkeys/practice65/bootloader_defs.h b/keyboards/cannonkeys/practice65/bootloader_defs.h deleted file mode 100644 index 6b8fa9f727c..00000000000 --- a/keyboards/cannonkeys/practice65/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/practice65/chconf.h b/keyboards/cannonkeys/practice65/chconf.h deleted file mode 100644 index bbd9b2da62d..00000000000 --- a/keyboards/cannonkeys/practice65/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice65/config.h b/keyboards/cannonkeys/practice65/config.h deleted file mode 100644 index d09b521bfab..00000000000 --- a/keyboards/cannonkeys/practice65/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x6565 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER CannonKeys -#define PRODUCT Practice 65 -#define DESCRIPTION Practice 65 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 } -#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 } -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_LEVELS 6 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGBLIGHT_ANIMATIONS - -#define WS2812_LED_N 20 -#define RGBLED_NUM WS2812_LED_N -#define PORT_WS2812 GPIOB -#define PIN_WS2812 15 -#define WS2812_SPI SPID2 - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/practice65/halconf.h b/keyboards/cannonkeys/practice65/halconf.h deleted file mode 100644 index 72879a575b9..00000000000 --- a/keyboards/cannonkeys/practice65/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice65/info.json b/keyboards/cannonkeys/practice65/info.json deleted file mode 100644 index 6c448fda205..00000000000 --- a/keyboards/cannonkeys/practice65/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Practice65", - "url": "https://cannonkeys.com", - "maintainer": "awkannan", - "width": 16, - "height": 5, - "layouts": { - "LAYOUT_default": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] - } - } -} diff --git a/keyboards/cannonkeys/practice65/keymaps/default/keymap.c b/keyboards/cannonkeys/practice65/keymaps/default/keymap.c deleted file mode 100644 index fdc06e39857..00000000000 --- a/keyboards/cannonkeys/practice65/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BASE 0 -#define _FN1 1 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_default( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \ - ), - - [_FN1] = LAYOUT_default( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, _______,\ - RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ - BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, RESET \ - ) -}; diff --git a/keyboards/cannonkeys/practice65/ld/MKL26Z64.ld b/keyboards/cannonkeys/practice65/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/cannonkeys/practice65/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef6016..00000000000 --- a/keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/cannonkeys/practice65/mcuconf.h b/keyboards/cannonkeys/practice65/mcuconf.h deleted file mode 100644 index fced27289e0..00000000000 --- a/keyboards/cannonkeys/practice65/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/practice65/practice65.c b/keyboards/cannonkeys/practice65/practice65.c deleted file mode 100644 index 10f60460fac..00000000000 --- a/keyboards/cannonkeys/practice65/practice65.c +++ /dev/null @@ -1,2 +0,0 @@ - -#include "practice65.h" diff --git a/keyboards/cannonkeys/practice65/practice65.h b/keyboards/cannonkeys/practice65/practice65.h deleted file mode 100644 index dec02af936f..00000000000 --- a/keyboards/cannonkeys/practice65/practice65.h +++ /dev/null @@ -1,19 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define KNO KC_NO - -#define LAYOUT_default( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2F, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, \ - K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4F \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO , K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, K2F }, \ - { K30, KNO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, K3F }, \ - { K40, K41, K42, KNO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D, KC_NO, K4F } \ -} diff --git a/keyboards/cannonkeys/practice65/readme.md b/keyboards/cannonkeys/practice65/readme.md deleted file mode 100644 index 515d1ab5959..00000000000 --- a/keyboards/cannonkeys/practice65/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Practice 65 - -A Blue Pill STM32F103C8T6-based 65% ANSI board. - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: Blue Pill STM32F103C8T6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/practice65:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/practice65/rules.mk b/keyboards/cannonkeys/practice65/rules.mk deleted file mode 100644 index 8bbc910aade..00000000000 --- a/keyboards/cannonkeys/practice65/rules.mk +++ /dev/null @@ -1,53 +0,0 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index d9f7bc329e6..00000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; - SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); -} diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index de3a93d1ceb..00000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,922 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 32768 -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c6..00000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index 9c7cf4fd76a..00000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ - - - - - resources/gencfg/processors/boards/stm32f0xx/templates - .. - 3.0.x - - ST STM32F072B-Discovery - ST_STM32F072B_DISCOVERY - - STM32F072xB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/keyboards/cannonkeys/satisfaction75/bootloader_defs.h b/keyboards/cannonkeys/satisfaction75/bootloader_defs.h deleted file mode 100644 index 02c48c4e6dc..00000000000 --- a/keyboards/cannonkeys/satisfaction75/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/satisfaction75/chconf.h b/keyboards/cannonkeys/satisfaction75/chconf.h deleted file mode 100644 index 99fa8ce3982..00000000000 --- a/keyboards/cannonkeys/satisfaction75/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h deleted file mode 100644 index 092b372577b..00000000000 --- a/keyboards/cannonkeys/satisfaction75/config.h +++ /dev/null @@ -1,120 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x57F5 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER CannonKeys -#define PRODUCT Satisfaction75 -#define DESCRIPTION Satisfaction 75 Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 - -#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 } -#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 } -#define DIODE_DIRECTION COL2ROW - -#define NUMBER_OF_ENCODERS 1 -#define ENCODERS_PAD_A { B9 } -#define ENCODERS_PAD_B { B8 } - -//LEDS A6, RGB B15 -#define BACKLIGHT_LEVELS 24 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#ifdef QWIIC_MICRO_OLED_ENABLE - -#undef I2C_ADDRESS_SA0_1 -#define I2C_ADDRESS_SA0_1 0b0111100 -#define LCDWIDTH 128 -#define LCDHEIGHT 32 - -#endif - - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x01 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 - -// Dynamic macro starts after dynamic keymaps (35+(4*6*16*2)) = (35+768) = 803 - -// I'm also putting my custom stuff after that -// 1 for enabled encoder modes -// 1 for custom backlighting controls -// 1 for OLED default mode -// 6 for 3x custom encoder settings, left, right, and press (18 total) - -#define DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES 803 -#define DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT 804 -#define DYNAMIC_KEYMAP_DEFAULT_OLED 805 -#define DYNAMIC_KEYMAP_CUSTOM_ENCODER 806 - -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 824 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/satisfaction75/halconf.h b/keyboards/cannonkeys/satisfaction75/halconf.h deleted file mode 100644 index 9a9ab838e64..00000000000 --- a/keyboards/cannonkeys/satisfaction75/halconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c deleted file mode 100644 index 56e810d32a1..00000000000 --- a/keyboards/cannonkeys/satisfaction75/i2c_master.c +++ /dev/null @@ -1,124 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* This library is only valid for STM32 processors. - * This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used - * but using any other I2C pins should be trivial. - */ - -#include "i2c_master.h" -#include "quantum.h" -#include -#include - -static uint8_t i2c_address; - -// This configures the I2C clock to 400khz assuming a 48Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(0x00U) | - STM32_TIMINGR_SCLDEL(0x03U) | STM32_TIMINGR_SDADEL(0x01U) | - STM32_TIMINGR_SCLH(0x03U) | STM32_TIMINGR_SCLL(0x09U), - 0, - 0 -}; - -static i2c_status_t chibios_to_qmk(const msg_t status) { - switch (status) { - case I2C_NO_ERROR: - return I2C_STATUS_SUCCESS; - case I2C_TIMEOUT: - return I2C_STATUS_TIMEOUT; - // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT - default: - return I2C_STATUS_ERROR; - } -} - -__attribute__ ((weak)) -void i2c_init(void) -{ - // Try releasing special pins for a short time - palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); - palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); - - palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); - - //i2cInit(); //This is invoked by halInit() so no need to redo it. -} - -i2c_status_t i2c_start(uint8_t address) -{ - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - return I2C_STATUS_SUCCESS; -} - -i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - i2cAcquireBus(&I2C_DRIVER); - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); - i2cReleaseBus(&I2C_DRIVER); - return chibios_to_qmk(status); -} - -i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); - return chibios_to_qmk(status); -} - -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - - uint8_t complete_packet[length + 1]; - for(uint8_t i = 0; i < length; i++) - { - complete_packet[i+1] = data[i]; - } - complete_packet[0] = regaddr; - - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); - return chibios_to_qmk(status); -} - -i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) -{ - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); - return chibios_to_qmk(status); -} - -void i2c_stop(void) -{ - i2cStop(&I2C_DRIVER); -} diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c deleted file mode 100644 index 5e87c73dcc5..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_default( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/jae/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/jae/keymap.c deleted file mode 100644 index 733ba8cd673..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/jae/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGDN, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c deleted file mode 100644 index 3595c107b98..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGUP, - KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk b/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk deleted file mode 100644 index 3357eb91c05..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/tester/rules.mk +++ /dev/null @@ -1 +0,0 @@ -QWIIC_ENABLE = no diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c b/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c deleted file mode 100644 index 296fd7da6aa..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, ENC_PRESS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGUP, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - - -void matrix_init_user(void) { - //user initialization -} - -void matrix_scan_user(void) { - //user matrix -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} diff --git a/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk b/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk deleted file mode 100644 index d12497792d5..00000000000 --- a/keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# rules.mk overrides to enable VIA - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes - diff --git a/keyboards/cannonkeys/satisfaction75/led.c b/keyboards/cannonkeys/satisfaction75/led.c deleted file mode 100644 index 3ddcec2028b..00000000000 --- a/keyboards/cannonkeys/satisfaction75/led.c +++ /dev/null @@ -1,240 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" -#include "led_custom.h" -#include "satisfaction75.h" -#include "printf.h" - -static void breathing_callback(PWMDriver *pwmp); - -static PWMConfig pwmCFG = { - 0xFFFF, /* PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - NULL, /* No Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -static PWMConfig pwmCFG_breathing = { - 0xFFFF, /* 10kHz PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - breathing_callback, /* Breathing Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - - -void backlight_init_ports(void) { - palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); - pwmStart(&PWMD3, &pwmCFG); - if(kb_backlight_config.enable){ - if(kb_backlight_config.breathing){ - breathing_enable(); - } else{ - backlight_set(kb_backlight_config.level); - } - } else { - backlight_set(0); - } -} - -void backlight_set(uint8_t level) { - uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); - if (level == 0) { - // Turn backlight off - pwmDisableChannel(&PWMD3, 0); - } else { - // Turn backlight on - if(!is_breathing()){ - pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty)); - } - } -} - - -uint8_t backlight_tick = 0; - -void backlight_task(void) { -} - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -bool is_breathing(void) { - return PWMD3.config == &pwmCFG_breathing; -} - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) - - -void breathing_interrupt_enable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG_breathing); - chSysLockFromISR(); - pwmEnablePeriodicNotification(&PWMD3); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - 0xFFFF - ) - ); - chSysUnlockFromISR(); -} - -void breathing_interrupt_disable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG); -} - -void breathing_enable(void) -{ - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - breathing_interrupt_enable(); -} - -void breathing_pulse(void) -{ - if (kb_backlight_config.level == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - breathing_interrupt_enable(); -} - -void breathing_disable(void) -{ - breathing_interrupt_disable(); - // Restore backlight level - backlight_set(kb_backlight_config.level); -} - -void breathing_self_disable(void) -{ - if (kb_backlight_config.level == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()){ - breathing_disable(); - } else { - breathing_enable(); - } -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * kb_backlight_config.level; -} - -static void breathing_callback(PWMDriver *pwmp) -{ - (void)pwmp; - uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 256); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - breathing_interrupt_disable(); - } - - uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); - - chSysLockFromISR(); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - duty - ) - ); - chSysUnlockFromISR(); -} diff --git a/keyboards/cannonkeys/satisfaction75/led_custom.h b/keyboards/cannonkeys/satisfaction75/led_custom.h deleted file mode 100644 index fe5c9e5dcfa..00000000000 --- a/keyboards/cannonkeys/satisfaction75/led_custom.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -void backlight_task(void); -void breathing_interrupt_disable(void); -void breathing_interrupt_enable(void); diff --git a/keyboards/cannonkeys/satisfaction75/mcuconf.h b/keyboards/cannonkeys/satisfaction75/mcuconf.h deleted file mode 100644 index 6d898579628..00000000000 --- a/keyboards/cannonkeys/satisfaction75/mcuconf.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF -// #define STM32F070xB - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/satisfaction75/prototype/prototype.h b/keyboards/cannonkeys/satisfaction75/prototype/prototype.h deleted file mode 100644 index 42e574f3ea8..00000000000 --- a/keyboards/cannonkeys/satisfaction75/prototype/prototype.h +++ /dev/null @@ -1,19 +0,0 @@ -#pragma once - -#include "satisfaction75.h" - -#define LAYOUT_default( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} diff --git a/keyboards/cannonkeys/satisfaction75/prototype/rules.mk b/keyboards/cannonkeys/satisfaction75/prototype/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/cannonkeys/satisfaction75/readme.md b/keyboards/cannonkeys/satisfaction75/readme.md deleted file mode 100644 index 361d1eb0f1a..00000000000 --- a/keyboards/cannonkeys/satisfaction75/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# Satisfaction75 - -Satisfaction75 Keyboard - -Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) -Hardware Supported: STM32F072CBT6 - -Make example for this keyboard (after setting up your build environment): - - make cannonkeys/Satisfaction75:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/satisfaction75/rev1/rev1.h b/keyboards/cannonkeys/satisfaction75/rev1/rev1.h deleted file mode 100644 index 302b7e43def..00000000000 --- a/keyboards/cannonkeys/satisfaction75/rev1/rev1.h +++ /dev/null @@ -1,108 +0,0 @@ -#pragma once - -#include "satisfaction75.h" - -// This layout is the default - it's what's in VIA -// ANSI, bottom row 1.25/1.25/1.25/6.25/1/1/1 -#define LAYOUT_default( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - -// ISO, bottom row 1.25/1.25/1.25/6.25/1/1/1 -#define LAYOUT_iso( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, bottom row 1.25/1.25/1.25/6.25/1.5/1.5 -#define LAYOUT_3x2( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K505, K509, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, KC_NO, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, WKL bottom row 1.5/1.5/7/1.5/1.5, Split Backspace -#define LAYOUT_2x2( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K505, K509, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, KC_NO, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, KC_NO, K511, K512, K513, KC_NO, K515 } \ -} - -// ANSI, bottom row 1.25/1.25/1.25/2.25/1.25/2.75/1/1/1 -// ANSI, bottom row 1.25/1.25/1.25/2.75/1.25/2.25/1/1/1 -#define LAYOUT_split_space( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K503, K505, K507, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, K503, KC_NO, K505, KC_NO, K507, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} - - -// Expose All Keys - Split backspace - ISO Extra keys - Split space bottom row -#define LAYOUT_all( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K503, K505, K507, K509, K510, K511, K512, K513, K515 \ -) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ - { K500, K501, K502, K503, KC_NO, K505, KC_NO, K507, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ -} diff --git a/keyboards/cannonkeys/satisfaction75/rev1/rules.mk b/keyboards/cannonkeys/satisfaction75/rev1/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk deleted file mode 100644 index 3e2877200ed..00000000000 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ /dev/null @@ -1,57 +0,0 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# - -SRC += led.c \ - satisfaction_encoder.c \ - satisfaction_oled.c - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = no # Custom matrix file -ENCODER_ENABLE = yes -QWIIC_ENABLE += MICRO_OLED -#BACKLIGHT_ENABLE = yes - -# RAW_ENABLE = yes -# DYNAMIC_KEYMAP_ENABLE = yes - -DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1 diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c deleted file mode 100644 index 0e788b29b78..00000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ /dev/null @@ -1,476 +0,0 @@ -#include "satisfaction75.h" -#include "print.h" -#include "debug.h" - -#include "ch.h" -#include "hal.h" - -#ifdef QWIIC_MICRO_OLED_ENABLE -#include "micro_oled.h" -#include "qwiic.h" -#endif - -#include "timer.h" - -#include "raw_hid.h" -#include "dynamic_keymap.h" -#include "tmk_core/common/eeprom.h" - -// HACK -#include "keyboards/zeal60/zeal60_api.h" // Temporary hack -#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack - - -/* Artificial delay added to get media keys to work in the encoder*/ -#define MEDIA_KEY_DELAY 10 - -uint16_t last_flush; - -volatile uint8_t led_numlock = false; -volatile uint8_t led_capslock = false; -volatile uint8_t led_scrolllock = false; - -uint8_t layer; - -bool queue_for_send = false; -bool clock_set_mode = false; -uint8_t oled_mode = OLED_DEFAULT; -bool oled_sleeping = false; - -uint8_t encoder_value = 32; -uint8_t encoder_mode = ENC_MODE_VOLUME; -uint8_t enabled_encoder_modes = 0x1F; - -RTCDateTime last_timespec; -uint16_t last_minute = 0; - -uint8_t time_config_idx = 0; -int8_t hour_config = 0; -int16_t minute_config = 0; -int8_t year_config = 0; -int8_t month_config = 0; -int8_t day_config = 0; -uint8_t previous_encoder_mode = 0; - -backlight_config_t kb_backlight_config = { - .enable = true, - .breathing = true, - .level = BACKLIGHT_LEVELS -}; - -bool eeprom_is_valid(void) -{ - return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && - eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); -} - -void eeprom_set_valid(bool valid) -{ - eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); - eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); -} - -void eeprom_reset(void) -{ - // Set the Zeal60 specific EEPROM state as invalid. - eeprom_set_valid(false); - // Set the TMK/QMK EEPROM state as invalid. - eeconfig_disable(); -} - -#ifdef RAW_ENABLE - -void raw_hid_receive( uint8_t *data, uint8_t length ) -{ - uint8_t *command_id = &(data[0]); - uint8_t *command_data = &(data[1]); - switch ( *command_id ) - { - case id_get_protocol_version: - { - command_data[0] = PROTOCOL_VERSION >> 8; - command_data[1] = PROTOCOL_VERSION & 0xFF; - break; - } - case id_get_keyboard_value: - { - switch( command_data[0]) - { - case id_uptime: - { - uint32_t value = timer_read32(); - command_data[1] = (value >> 24 ) & 0xFF; - command_data[2] = (value >> 16 ) & 0xFF; - command_data[3] = (value >> 8 ) & 0xFF; - command_data[4] = value & 0xFF; - break; - } - case id_oled_default_mode: - { - uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED); - command_data[1] = default_oled; - break; - } - case id_oled_mode: - { - command_data[1] = oled_mode; - break; - - } - case id_encoder_modes: - { - command_data[1] = enabled_encoder_modes; - break; - } - case id_encoder_custom: - { - // uint8_t custom_encoder_idx = command_data[1]; - // command_data[2] = 0x00; - // command_data[3] = 0x00; - // command_data[4] = 0x00; - // command_data[5] = 0x00; - // command_data[6] = 0x00; - // command_data[7] = 0x00; - break; - } - default: - { - *command_id = id_unhandled; - break; - } - } - break; - } -#ifdef DYNAMIC_KEYMAP_ENABLE - case id_set_keyboard_value: - { - switch(command_data[0]){ - case id_oled_default_mode: - { - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED, command_data[1]); - break; - } - case id_oled_mode: - { - oled_mode = command_data[1]; - draw_ui(); - break; - } - case id_encoder_modes: - { - enabled_encoder_modes = command_data[1]; - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, enabled_encoder_modes); - break; - } - case id_encoder_custom: - { - // uint8_t custom_encoder_idx = command_data[1]; - break; - } - default: - { - *command_id = id_unhandled; - break; - } - } - break; - } - case id_dynamic_keymap_get_keycode: - { - uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); - command_data[3] = keycode >> 8; - command_data[4] = keycode & 0xFF; - break; - } - case id_dynamic_keymap_set_keycode: - { - dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); - break; - } - case id_dynamic_keymap_reset: - { - dynamic_keymap_reset(); - break; - } - case id_dynamic_keymap_macro_get_count: - { - command_data[0] = dynamic_keymap_macro_get_count(); - break; - } - case id_dynamic_keymap_macro_get_buffer_size: - { - uint16_t size = dynamic_keymap_macro_get_buffer_size(); - command_data[0] = size >> 8; - command_data[1] = size & 0xFF; - break; - } - case id_dynamic_keymap_macro_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_reset: - { - dynamic_keymap_macro_reset(); - break; - } - case id_dynamic_keymap_get_layer_count: - { - command_data[0] = dynamic_keymap_get_layer_count(); - break; - } - case id_dynamic_keymap_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_set_buffer( offset, size, &command_data[3] ); - break; - } -#endif // DYNAMIC_KEYMAP_ENABLE - case id_eeprom_reset: - { - eeprom_reset(); - break; - } - case id_bootloader_jump: - { - // Need to send data back before the jump - // Informs host that the command is handled - raw_hid_send( data, length ); - // Give host time to read it - wait_ms(100); - bootloader_jump(); - break; - } - default: - { - // Unhandled message. - *command_id = id_unhandled; - break; - } - } - - // Return same buffer with values changed - raw_hid_send( data, length ); - -} - -#endif - - -void read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); - if (leds & (1 << USB_LED_NUM_LOCK)) { - if (led_numlock == false){ - led_numlock = true;} - } else { - if (led_numlock == true){ - led_numlock = false;} - } - if (leds & (1 << USB_LED_CAPS_LOCK)) { - if (led_capslock == false){ - led_capslock = true;} - } else { - if (led_capslock == true){ - led_capslock = false;} - } - if (leds & (1 << USB_LED_SCROLL_LOCK)) { - if (led_scrolllock == false){ - led_scrolllock = true;} - } else { - if (led_scrolllock == true){ - led_scrolllock = false;} - } -} - -uint32_t layer_state_set_kb(uint32_t state) { - state = layer_state_set_user(state); - layer = biton32(state); - queue_for_send = true; - return state; -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - queue_for_send = true; - switch (keycode) { - case OLED_TOGG: - if(!clock_set_mode){ - if (record->event.pressed) { - oled_mode = (oled_mode + 1) % _NUM_OLED_MODES; - draw_ui(); - } - } - return false; - case CLOCK_SET: - if (record->event.pressed) { - if(clock_set_mode){ - pre_encoder_mode_change(); - clock_set_mode = false; - encoder_mode = previous_encoder_mode; - post_encoder_mode_change(); - - }else{ - previous_encoder_mode = encoder_mode; - pre_encoder_mode_change(); - clock_set_mode = true; - encoder_mode = ENC_MODE_CLOCK_SET; - post_encoder_mode_change(); - } - } - return false; - case ENC_PRESS: - if (record->event.pressed) { - uint16_t mapped_code = handle_encoder_press(); - uint16_t held_keycode_timer = timer_read(); - if(mapped_code != 0){ - register_code(mapped_code); - while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } - unregister_code(mapped_code); - } - } else { - // Do something else when release - } - return false; - default: - break; - } - -#ifdef DYNAMIC_KEYMAP_ENABLE - // Handle macros - if (record->event.pressed) { - if ( keycode >= MACRO00 && keycode <= MACRO15 ) - { - uint8_t id = keycode - MACRO00; - dynamic_keymap_macro_send(id); - return false; - } - } -#endif //DYNAMIC_KEYMAP_ENABLE - - return process_record_user(keycode, record); -} - - -void encoder_update_kb(uint8_t index, bool clockwise) { - encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; - queue_for_send = true; - if (index == 0) { - if (layer == 0){ - uint16_t mapped_code = 0; - if (clockwise) { - mapped_code = handle_encoder_clockwise(); - } else { - mapped_code = handle_encoder_ccw(); - } - uint16_t held_keycode_timer = timer_read(); - if(mapped_code != 0){ - register_code(mapped_code); - while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } - unregister_code(mapped_code); - } - } else { - if(clockwise){ - change_encoder_mode(false); - } else { - change_encoder_mode(true); - } - } - } -} - -void dynamic_keymap_custom_reset(void){ - void *p = (void*)(DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT); - void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR); - while ( p != end ) { - eeprom_update_byte(p, 0); - ++p; - } - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, 0x1F); -} - -void save_backlight_config_to_eeprom(){ - eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT, kb_backlight_config.raw); -} - -void load_custom_config(){ - kb_backlight_config.raw = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT); -#ifdef DYNAMIC_KEYMAP_ENABLE - oled_mode = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED); - enabled_encoder_modes = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES); -#endif -} - -void eeprom_init_kb(void) -{ - // If the EEPROM has the magic, the data is good. - // OK to load from EEPROM. - if (eeprom_is_valid()) { - load_custom_config(); - } else { - // If the EEPROM has not been saved before, or is out of date, - // save the default values to the EEPROM. Default values - // come from construction of the zeal_backlight_config instance. - //backlight_config_save(); -#ifdef DYNAMIC_KEYMAP_ENABLE - // This resets the keymaps in EEPROM to what is in flash. - dynamic_keymap_reset(); - // This resets the macros in EEPROM to nothing. - dynamic_keymap_macro_reset(); - // Reset the custom stuff - dynamic_keymap_custom_reset(); -#endif - // Save the magic number last, in case saving was interrupted - eeprom_set_valid(true); - } -} - -void matrix_init_kb(void) -{ - eeprom_init_kb(); - rtcGetTime(&RTCD1, &last_timespec); - queue_for_send = true; - backlight_init_ports(); - matrix_init_user(); -} - - -void matrix_scan_kb(void) { - rtcGetTime(&RTCD1, &last_timespec); - uint16_t minutes_since_midnight = last_timespec.millisecond / 1000 / 60; - - if (minutes_since_midnight != last_minute){ - last_minute = minutes_since_midnight; - if(!oled_sleeping){ - queue_for_send = true; - } - } -#ifdef QWIIC_MICRO_OLED_ENABLE - if (queue_for_send && oled_mode != OLED_OFF) { - oled_sleeping = false; - read_host_led_state(); - draw_ui(); - queue_for_send = false; - } - if (timer_elapsed(last_flush) > ScreenOffInterval && !oled_sleeping) { - send_command(DISPLAYOFF); /* 0xAE */ - oled_sleeping = true; - } -#endif -} - diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.h b/keyboards/cannonkeys/satisfaction75/satisfaction75.h deleted file mode 100644 index dfab68017f0..00000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.h +++ /dev/null @@ -1,113 +0,0 @@ -#pragma once - -#include "quantum.h" - -#ifdef KEYBOARD_cannonkeys_satisfaction75_prototype - #include "prototype.h" -#else - #include "rev1.h" -#endif - -/* screen off after this many milliseconds */ -#define ScreenOffInterval 60000 /* milliseconds */ - -typedef union { - uint8_t raw; - struct { - bool enable :1; - bool breathing : 1; - uint8_t level :6; - }; -} backlight_config_t; - -// Start these at the USER code range in VIA -enum my_keycodes { - ENC_PRESS = 0x5F80, - CLOCK_SET, - OLED_TOGG -}; - -enum s75_keyboard_value_id { - id_encoder_modes = 0x80, - id_oled_default_mode, - id_encoder_custom, - id_oled_mode -}; - -enum encoder_modes { - ENC_MODE_VOLUME, - ENC_MODE_MEDIA, - ENC_MODE_SCROLL, - ENC_MODE_BRIGHTNESS, - ENC_MODE_BACKLIGHT, - ENC_MODE_CUSTOM0, - ENC_MODE_CUSTOM1, - ENC_MODE_CUSTOM2, - _NUM_ENCODER_MODES, - ENC_MODE_CLOCK_SET // This shouldn't be included in the default modes, so we put it after NUM_ENCODER_MODES -}; - -enum oled_modes { - OLED_DEFAULT, - OLED_TIME, - OLED_OFF, - _NUM_OLED_MODES -}; - - -// Keyboard Information -extern volatile uint8_t led_numlock; -extern volatile uint8_t led_capslock; -extern volatile uint8_t led_scrolllock; -extern uint8_t layer; - -// OLED Behavior -extern uint16_t last_flush; -extern bool queue_for_send; -extern uint8_t oled_mode; -extern bool oled_sleeping; - -// Encoder Behavior -extern uint8_t encoder_value; -extern uint8_t encoder_mode; -extern uint8_t enabled_encoder_modes; - -// RTC -extern RTCDateTime last_timespec; -extern uint16_t last_minute; - -// RTC Configuration -extern bool clock_set_mode; -extern uint8_t time_config_idx; -extern int8_t hour_config; -extern int16_t minute_config; -extern int8_t year_config; -extern int8_t month_config; -extern int8_t day_config; -extern uint8_t previous_encoder_mode; - -// Backlighting -extern backlight_config_t kb_backlight_config; -extern bool kb_backlight_breathing; - -void pre_encoder_mode_change(void); -void post_encoder_mode_change(void); -void change_encoder_mode(bool negative); -uint16_t handle_encoder_clockwise(void); -uint16_t handle_encoder_ccw(void); -uint16_t handle_encoder_press(void); - -void update_time_config(int8_t increment); - -__attribute__ ((weak)) -void draw_ui(void); -void draw_default(void); -void draw_clock(void); - -void backlight_init_ports(void); -void backlight_set(uint8_t level); -bool is_breathing(void); -void breathing_enable(void); -void breathing_disable(void); -void load_custom_config(void); -void save_backlight_config_to_eeprom(void); diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c deleted file mode 100644 index 67768169186..00000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c +++ /dev/null @@ -1,184 +0,0 @@ -#include "satisfaction75.h" - -void pre_encoder_mode_change(){ - if(encoder_mode == ENC_MODE_CLOCK_SET){ - RTCDateTime timespec; - timespec.year = year_config; - timespec.month = month_config; - timespec.day = day_config; - // timespec.dayofweek = last_timespec.dayofweek; - // timespec.dstflag = last_timespec.dstflag; - timespec.millisecond = (hour_config * 60 + minute_config) * 60 * 1000; - rtcSetTime(&RTCD1, ×pec); - } else if (encoder_mode == ENC_MODE_BACKLIGHT){ - save_backlight_config_to_eeprom(); - } -} - -void post_encoder_mode_change(){ - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour_config = (last_minute / 60); - minute_config = last_minute % 60; - year_config = last_timespec.year; - month_config = last_timespec.month; - day_config = last_timespec.day; - time_config_idx = 0; - } -} - -void change_encoder_mode(bool negative){ - pre_encoder_mode_change(); - if(enabled_encoder_modes == 0){ - enabled_encoder_modes = 0x1F; - } - do { - if(negative){ - if (encoder_mode == 0){ - encoder_mode = _NUM_ENCODER_MODES - 1; - } else{ - encoder_mode = encoder_mode - 1; - } - } else { - encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES; - } - } while(((1 << encoder_mode) & enabled_encoder_modes) == 0); - post_encoder_mode_change(); -} - -void update_time_config(int8_t increment){ - uint8_t day_limit = 31; - uint16_t adjusted_year = 1980 + year_config; - switch(time_config_idx){ - case 0: // hour - default: - hour_config = (hour_config + increment) % 24; - if (hour_config < 0){ - hour_config += 24; - } - break; - case 1: // minute - minute_config = (minute_config + increment) % 60; - if (minute_config < 0){ - minute_config += 60; - } - break; - case 2: // year - year_config += increment; - break; - case 3: // month - month_config = (month_config % 12) + increment; - if (month_config <= 0){ - month_config += 12; - } - break; - case 4: //day - if (month_config == 9 || month_config == 4 || month_config == 6 || month_config == 11){ - day_limit = 30; - } else if(month_config == 2){ - day_limit = adjusted_year % 4 == 0 && !(adjusted_year % 100 == 0 && adjusted_year % 400 != 0) ? 29 : 28; - } - day_config = (day_config % day_limit) + increment; - if(day_config <= 0){ - day_config += day_limit; - } - break; - } -} - -uint16_t handle_encoder_clockwise(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mapped_code = KC_VOLU; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_NEXT_TRACK; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_WH_D; - break; - case ENC_MODE_BACKLIGHT: - kb_backlight_config.level = kb_backlight_config.level + 1; - if(kb_backlight_config.level > BACKLIGHT_LEVELS){ - kb_backlight_config.level = BACKLIGHT_LEVELS; - } - backlight_set(kb_backlight_config.level); - if (kb_backlight_config.level != 0){ - kb_backlight_config.enable = true; - } - break; - case ENC_MODE_BRIGHTNESS: - mapped_code = KC_BRIGHTNESS_UP; - break; - case ENC_MODE_CLOCK_SET: - update_time_config(1); - queue_for_send = true; - break; - } - return mapped_code; -} - -uint16_t handle_encoder_ccw(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mapped_code = KC_VOLD; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_PREV_TRACK; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_WH_U; - break; - case ENC_MODE_BACKLIGHT: - // mapped_code = BL_DEC; - if(kb_backlight_config.level != 0){ - kb_backlight_config.level = kb_backlight_config.level - 1; - } - backlight_set(kb_backlight_config.level); - if (kb_backlight_config.level == 0){ - kb_backlight_config.enable = false; - } - break; - case ENC_MODE_BRIGHTNESS: - mapped_code = KC_BRIGHTNESS_DOWN; - break; - case ENC_MODE_CLOCK_SET: - update_time_config(-1); - queue_for_send = true; - break; - } - return mapped_code; -} - -uint16_t handle_encoder_press(){ - uint16_t mapped_code = 0; - switch(encoder_mode){ - case ENC_MODE_VOLUME: - mapped_code = KC_MUTE; - break; - case ENC_MODE_MEDIA: - mapped_code = KC_MEDIA_PLAY_PAUSE; - break; - case ENC_MODE_SCROLL: - mapped_code = KC_BTN3; - break; - case ENC_MODE_BACKLIGHT: - // mapped_code = BL_TOGG; - kb_backlight_config.breathing = !kb_backlight_config.breathing; - if(!kb_backlight_config.breathing){ - breathing_disable(); - } else{ - breathing_enable(); - } - break; - case ENC_MODE_CLOCK_SET: - time_config_idx = (time_config_idx + 1) % 5; - default: - case ENC_MODE_BRIGHTNESS: - break; - } - return mapped_code; -} diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c deleted file mode 100644 index 4e22587db85..00000000000 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c +++ /dev/null @@ -1,271 +0,0 @@ -#include "satisfaction75.h" -#include "micro_oled.h" - -__attribute__ ((weak)) -void draw_ui() { -#ifdef QWIIC_MICRO_OLED_ENABLE - clear_buffer(); - last_flush = timer_read(); - send_command(DISPLAYON); - if(clock_set_mode){ - draw_clock(); - return; - } - switch (oled_mode){ - default: - case OLED_DEFAULT: - draw_default(); - break; - case OLED_TIME: - draw_clock(); - break; - case OLED_OFF: - send_command(DISPLAYOFF); - break; - } -#endif -} - -void draw_encoder(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "ENC", PIXEL_ON, NORM, 0); - } else { - startX -= 22; - } - draw_rect_filled_soft(startX + 22, startY + 1, 3 + (3 * 6), 9, PIXEL_ON, NORM); - char* mode_string = ""; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mode_string = "VOL"; - break; - case ENC_MODE_MEDIA: - mode_string = "MED"; - break; - case ENC_MODE_SCROLL: - mode_string = "SCR"; - break; - case ENC_MODE_BRIGHTNESS: - mode_string = "BRT"; - break; - case ENC_MODE_BACKLIGHT: - mode_string = "BKL"; - break; - case ENC_MODE_CLOCK_SET: - mode_string = "CLK"; - break; - case ENC_MODE_CUSTOM0: - mode_string = "CS0"; - break; - case ENC_MODE_CUSTOM1: - mode_string = "CS1"; - break; - case ENC_MODE_CUSTOM2: - mode_string = "CS2"; - break; - } - draw_string(startX + 24, startY + 2, mode_string, PIXEL_ON, XOR, 0); -} - -void draw_layer_section(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "LAYER", PIXEL_ON, NORM, 0); - } else { - startX -= 32; - } - draw_rect_filled_soft(startX + 32, startY + 1, 9, 9, PIXEL_ON, NORM); - draw_char(startX + 34, startY + 2, layer + 0x30, PIXEL_ON, XOR, 0); -} - -void draw_default(){ - uint8_t hour = last_minute / 60; - uint16_t minute = last_minute % 60; - - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - } - - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[2] = ""; - char min_str[2] = ""; - - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); - - uint8_t mods = get_mods(); - -/* Layer indicator is 41 x 10 pixels */ - draw_layer_section(0,0,true); - -#define ENCODER_INDICATOR_X 45 -#define ENCODER_INDICATOR_Y 0 - draw_encoder(ENCODER_INDICATOR_X, ENCODER_INDICATOR_Y, true); -/* Matrix display is 19 x 9 pixels */ -#define MATRIX_DISPLAY_X 0 -#define MATRIX_DISPLAY_Y 18 - - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - for (uint8_t y = 0; y < MATRIX_COLS; y++) { - draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); - } - } - draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM); - /* hadron oled location on thumbnail */ - draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM); - -/* Mod display is 41 x 16 pixels */ -#define MOD_DISPLAY_X 30 -#define MOD_DISPLAY_Y 18 - - if (mods & MOD_LSFT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LCTL) { - draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LALT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LGUI) { - draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); - } - -/* Lock display is 23 x 21 */ -#define LOCK_DISPLAY_X 100 -#define LOCK_DISPLAY_Y 0 - - if (led_capslock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_ON, NORM, 0); - } - - if (led_scrolllock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_OFF, NORM, 0); - } else if (led_scrolllock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_ON, NORM, 0); - } - -#define TIME_DISPLAY_X 82 -#define TIME_DISPLAY_Y 22 - draw_string(TIME_DISPLAY_X, TIME_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 11, TIME_DISPLAY_Y, ":", PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 15, TIME_DISPLAY_Y, min_str, PIXEL_ON, NORM, 0); - if(is_pm){ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "pm", PIXEL_ON, NORM, 0); - } else{ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "am", PIXEL_ON, NORM, 0); - } - - send_buffer(); -} - -void draw_clock(){ - int8_t hour = last_minute / 60; - int16_t minute = last_minute % 60; - int16_t year = last_timespec.year + 1980; - int8_t month = last_timespec.month; - int8_t day = last_timespec.day; - - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - year = year_config + 1980; - month = month_config; - day = day_config; - } - - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[2] = ""; - char min_str[2] = ""; - char year_str[4] = ""; - char month_str[2] = ""; - char day_str[2] = ""; - - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); - sprintf(year_str, "%d", year); - sprintf(month_str, "%02d", month); - sprintf(day_str, "%02d", day); - - -#define DATE_DISPLAY_X 6 -#define DATE_DISPLAY_Y 0 - draw_string(DATE_DISPLAY_X, DATE_DISPLAY_Y, year_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 25, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y, month_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 44, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y, day_str, PIXEL_ON, NORM, 0); - -#define CLOCK_DISPLAY_X 6 -#define CLOCK_DISPLAY_Y 14 - draw_string(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 17, CLOCK_DISPLAY_Y, ":", PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y, min_str, PIXEL_ON, NORM, 1); - if(is_pm){ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "pm", PIXEL_ON, NORM, 1); - } else{ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "am", PIXEL_ON, NORM, 1); - } - - if(clock_set_mode){ - switch(time_config_idx){ - case 0: // hour - default: - draw_line(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 16, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 1: // minute - draw_line(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 2: // year - draw_line(DATE_DISPLAY_X, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 23, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 3: // month - draw_line(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 43, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 4: //day - draw_line(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 61, DATE_DISPLAY_Y + 9,PIXEL_ON, NORM); - break; - } - } - - draw_encoder(80, 0, true); - draw_layer_section(80, 11, true); - -#define CAPS_DISPLAY_X 86 -#define CAPS_DISPLAY_Y 22 - - if (led_capslock == true) { - draw_rect_filled_soft(CAPS_DISPLAY_X, CAPS_DISPLAY_Y, 5 + (4 * 6), 9, PIXEL_ON, NORM); - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_ON, NORM, 0); - } - - - send_buffer(); - -} diff --git a/keyboards/cannonkeys/stm32f072/keyboard.c b/keyboards/cannonkeys/stm32f072/keyboard.c deleted file mode 100644 index 02c6dae18b2..00000000000 --- a/keyboards/cannonkeys/stm32f072/keyboard.c +++ /dev/null @@ -1,303 +0,0 @@ -#include "keyboard.h" -#include "ch.h" -#include "hal.h" -#include "led_custom.h" -#include "util.h" -#include "quantum.h" - -#include "ws2812.h" - -#include "raw_hid.h" -#include "dynamic_keymap.h" -#include "tmk_core/common/eeprom.h" - -// HACK -#include "keyboards/zeal60/zeal60_api.h" // Temporary hack -#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack - - -backlight_config_t kb_backlight_config = { - .enable = true, - .breathing = true, - .level = BACKLIGHT_LEVELS -}; - -bool eeprom_is_valid(void) -{ - return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && - eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); -} - -void eeprom_set_valid(bool valid) -{ - eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); - eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); -} - -void eeprom_reset(void) -{ - eeprom_set_valid(false); - eeconfig_disable(); -} - -void save_backlight_config_to_eeprom(){ - eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw); -} - -void load_custom_config(){ - kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT); -} - -#ifdef DYNAMIC_KEYMAP_ENABLE -void dynamic_keymap_custom_reset(void){ - void *p = (void*)(EEPROM_CUSTOM_BACKLIGHT); - void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR); - while ( p != end ) { - eeprom_update_byte(p, 0); - ++p; - } -} -#endif - -void eeprom_init_kb(void) -{ - // If the EEPROM has the magic, the data is good. - // OK to load from EEPROM. - if (eeprom_is_valid()) { - load_custom_config(); - } else { -#ifdef DYNAMIC_KEYMAP_ENABLE - // This resets the keymaps in EEPROM to what is in flash. - dynamic_keymap_reset(); - // This resets the macros in EEPROM to nothing. - dynamic_keymap_macro_reset(); - // Reset the custom stuff - dynamic_keymap_custom_reset(); -#endif - // Save the magic number last, in case saving was interrupted - save_backlight_config_to_eeprom(); - eeprom_set_valid(true); - } -} - -__attribute__ ((weak)) -void matrix_init_board(void); - -void matrix_init_kb(void){ - eeprom_init_kb(); - /* MOSI pin*/ - palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0)); - wait_ms(500); - -#ifdef RGBLIGHT_ENABLE - leds_init(); -#endif - backlight_init_ports(); - - matrix_init_board(); -} - -void matrix_scan_kb(void) -{ - #ifdef RGBLIGHT_ENABLE - rgblight_task(); - #endif -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BL_INC: - if (record->event.pressed) { - kb_backlight_config.level = kb_backlight_config.level + 1; - if(kb_backlight_config.level > BACKLIGHT_LEVELS){ - kb_backlight_config.level = BACKLIGHT_LEVELS; - } - backlight_set(kb_backlight_config.level); - save_backlight_config_to_eeprom(); - } - return false; - case BL_TOGG: - if (record->event.pressed) { - kb_backlight_config.enable = !kb_backlight_config.enable; - if(kb_backlight_config.enable){ - backlight_set(kb_backlight_config.level); - } else { - backlight_set(0); - } - save_backlight_config_to_eeprom(); - } - return false; - - case BL_DEC: - if (record->event.pressed) { - if(kb_backlight_config.level <= 1){ - kb_backlight_config.level = 0; - } else { - kb_backlight_config.level = kb_backlight_config.level - 1; - } - backlight_set(kb_backlight_config.level); - save_backlight_config_to_eeprom(); - } - return false; - case BL_BRTG: - if (record->event.pressed) { - kb_backlight_config.breathing = !kb_backlight_config.breathing; - breathing_toggle(); - save_backlight_config_to_eeprom(); - } - return false; - default: - break; - } - - #ifdef DYNAMIC_KEYMAP_ENABLE - // Handle macros - if (record->event.pressed) { - if ( keycode >= MACRO00 && keycode <= MACRO15 ) - { - uint8_t id = keycode - MACRO00; - dynamic_keymap_macro_send(id); - return false; - } - } - #endif //DYNAMIC_KEYMAP_ENABLE - - return true; -} - - -// Start Dynamic Keymap code -#ifdef RAW_ENABLE - -void raw_hid_receive( uint8_t *data, uint8_t length ) -{ - uint8_t *command_id = &(data[0]); - uint8_t *command_data = &(data[1]); - switch ( *command_id ) - { - case id_get_protocol_version: - { - command_data[0] = PROTOCOL_VERSION >> 8; - command_data[1] = PROTOCOL_VERSION & 0xFF; - break; - } - case id_get_keyboard_value: - { - switch( command_data[0]) - { - case id_uptime: - { - uint32_t value = timer_read32(); - command_data[1] = (value >> 24 ) & 0xFF; - command_data[2] = (value >> 16 ) & 0xFF; - command_data[3] = (value >> 8 ) & 0xFF; - command_data[4] = value & 0xFF; - break; - } - default: - { - *command_id = id_unhandled; - break; - } - } - break; - } -#ifdef DYNAMIC_KEYMAP_ENABLE - - case id_dynamic_keymap_get_keycode: - { - uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); - command_data[3] = keycode >> 8; - command_data[4] = keycode & 0xFF; - break; - } - case id_dynamic_keymap_set_keycode: - { - dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); - break; - } - case id_dynamic_keymap_reset: - { - dynamic_keymap_reset(); - break; - } - case id_dynamic_keymap_macro_get_count: - { - command_data[0] = dynamic_keymap_macro_get_count(); - break; - } - case id_dynamic_keymap_macro_get_buffer_size: - { - uint16_t size = dynamic_keymap_macro_get_buffer_size(); - command_data[0] = size >> 8; - command_data[1] = size & 0xFF; - break; - } - case id_dynamic_keymap_macro_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_macro_reset: - { - dynamic_keymap_macro_reset(); - break; - } - case id_dynamic_keymap_get_layer_count: - { - command_data[0] = dynamic_keymap_get_layer_count(); - break; - } - case id_dynamic_keymap_get_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_get_buffer( offset, size, &command_data[3] ); - break; - } - case id_dynamic_keymap_set_buffer: - { - uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; - uint16_t size = command_data[2]; // size <= 28 - dynamic_keymap_set_buffer( offset, size, &command_data[3] ); - break; - } -#endif // DYNAMIC_KEYMAP_ENABLE - case id_eeprom_reset: - { - eeprom_reset(); - break; - } - case id_bootloader_jump: - { - // Need to send data back before the jump - // Informs host that the command is handled - raw_hid_send( data, length ); - // Give host time to read it - wait_ms(100); - bootloader_jump(); - break; - } - default: - { - // Unhandled message. - *command_id = id_unhandled; - break; - } - } - - // Return same buffer with values changed - raw_hid_send( data, length ); - -} - -#endif diff --git a/keyboards/cannonkeys/stm32f072/keyboard.h b/keyboards/cannonkeys/stm32f072/keyboard.h deleted file mode 100644 index 94c973d6153..00000000000 --- a/keyboards/cannonkeys/stm32f072/keyboard.h +++ /dev/null @@ -1,23 +0,0 @@ -#pragma once - -#include "quantum.h" - -typedef union { - uint8_t raw; - struct { - bool enable :1; - bool breathing : 1; - uint8_t level :6; - }; -} backlight_config_t; - -// Backlighting -extern backlight_config_t kb_backlight_config; -extern bool kb_backlight_breathing; -void backlight_init_ports(void); -void backlight_set(uint8_t level); -bool is_breathing(void); -void breathing_enable(void); -void breathing_disable(void); -void load_custom_config(void); -void save_backlight_config_to_eeprom(void); diff --git a/keyboards/cannonkeys/stm32f072/led.c b/keyboards/cannonkeys/stm32f072/led.c deleted file mode 100644 index 5c7df47da75..00000000000 --- a/keyboards/cannonkeys/stm32f072/led.c +++ /dev/null @@ -1,251 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" -#include "led_custom.h" -#include "keyboard.h" -#include "printf.h" - -static void breathing_callback(PWMDriver *pwmp); - -static PWMConfig pwmCFG = { - 0xFFFF, /* PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - NULL, /* No Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -static PWMConfig pwmCFG_breathing = { - 0xFFFF, /* 10kHz PWM clock frequency */ - 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ - breathing_callback, /* Breathing Callback */ - { - {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, /* HW dependent part.*/ - 0 -}; - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - - -uint8_t get_backlight_level(void){ - return kb_backlight_config.level; -} - -void backlight_init_ports(void) { - printf("backlight_init_ports()\n"); - palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); - pwmStart(&PWMD3, &pwmCFG); - // pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF))); - if(kb_backlight_config.enable){ - backlight_set(kb_backlight_config.level); - if(kb_backlight_config.breathing){ - breathing_enable(); - } - } else { - backlight_set(0); - } - -} - -void backlight_set(uint8_t level) { - printf("backlight_set(%d)\n", level); - uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); - printf("duty: (%d)\n", duty); - if (level == 0) { - // Turn backlight off - pwmDisableChannel(&PWMD3, 0); - } else { - // Turn backlight on - if(!is_breathing()){ - pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty)); - } - } -} - - -uint8_t backlight_tick = 0; - -void backlight_task(void) { -} - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -bool is_breathing(void) { - return PWMD3.config == &pwmCFG_breathing; -} - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) - - -void breathing_interrupt_enable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG_breathing); - chSysLockFromISR(); - pwmEnablePeriodicNotification(&PWMD3); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - 0xFFFF - ) - ); - chSysUnlockFromISR(); -} - -void breathing_interrupt_disable(void){ - pwmStop(&PWMD3); - pwmStart(&PWMD3, &pwmCFG); -} - -void breathing_enable(void) -{ - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - breathing_interrupt_enable(); -} - -void breathing_pulse(void) -{ - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - breathing_interrupt_enable(); -} - -void breathing_disable(void) -{ - printf("breathing_disable()\n"); - breathing_interrupt_disable(); - // Restore backlight level - backlight_set(get_backlight_level()); -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()){ - printf("disable breathing\n"); - breathing_disable(); - } else { - printf("enable breathing\n"); - breathing_enable(); - } -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -static void breathing_callback(PWMDriver *pwmp) -{ - (void)pwmp; - uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 256); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - breathing_interrupt_disable(); - } - - uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); - - chSysLockFromISR(); - pwmEnableChannelI( - &PWMD3, - 0, - PWM_FRACTION_TO_WIDTH( - &PWMD3, - 0xFFFF, - duty - ) - ); - chSysUnlockFromISR(); -} diff --git a/keyboards/cannonkeys/stm32f072/led_custom.h b/keyboards/cannonkeys/stm32f072/led_custom.h deleted file mode 100644 index 28e0f02ed34..00000000000 --- a/keyboards/cannonkeys/stm32f072/led_custom.h +++ /dev/null @@ -1,6 +0,0 @@ -#pragma once - -void backlight_task(void); -void breathing_interrupt_disable(void); -void breathing_interrupt_enable(void); -void breathing_toggle(void); diff --git a/keyboards/cannonkeys/stm32f072/ws2812.c b/keyboards/cannonkeys/stm32f072/ws2812.c deleted file mode 100644 index 665763931e3..00000000000 --- a/keyboards/cannonkeys/stm32f072/ws2812.c +++ /dev/null @@ -1,150 +0,0 @@ -#include "ch.h" -#include "hal.h" - -#include "ws2812.h" - -#define BYTES_FOR_LED_BYTE 4 -#define NB_COLORS 3 -#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS -#define DATA_SIZE BYTES_FOR_LED*NB_LEDS -#define RESET_SIZE 200 - -// Define the spi your LEDs are plugged to here -#define LEDS_SPI WS2812_SPI -// Define the number of LEDs you wish to control in your LED strip -#define NB_LEDS RGBLED_NUM - -#define LED_SPIRAL 0 - -static uint8_t txbuf[DATA_SIZE + RESET_SIZE]; -static uint8_t get_protocol_eq(uint8_t data, int pos); - -/* - * This lib is meant to be used asynchronously, thus the colors contained in - * the txbuf will be sent in loop, so that the colors are always the ones you - * put in the table (the user thus have less to worry about) - * - * Since the data are sent via DMA, and the call to spiSend is a blocking one, - * the processor ressources are not used to much, if you see your program being - * too slow, simply add a: - * chThdSleepMilliseconds(x); - * after the spiSend, where you increment x untill you are satisfied with your - * program speed, another trick may be to lower this thread priority : your call - */ -static THD_WORKING_AREA(LEDS_THREAD_WA, 128); -static THD_FUNCTION(ledsThread, arg) { - (void) arg; - while(1){ - spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf); - } -} - -#if LED_SPIRAL -/* - * 'Led spiral' is a simple demo in which we put all the leds to the same - * color, where this color does all the hsv circle in loop. - * If you want to launch the thread that will chage the led colors to the - * appropriate value, simply set LED_SPIRAL to 1. - */ - -static THD_WORKING_AREA(HSVTRANS_WA, 128); -static THD_FUNCTION(hsv_transThread, arg) { - (void) arg; - hsv_color color = {0, 255, 255}; - while(1){ - color.h += 1; - color.h %= 256; - set_leds_color_hsv(color); - chThdSleepMilliseconds(50); - } -} -#endif - -static const SPIConfig spicfg = { - NULL, - GPIOB, - 15, - SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us -}; - -/* - * Function used to initialize the driver. - * - * Starts by shutting off all the LEDs. - * Then gets access on the LED_SPI driver. - * May eventually launch an animation on the LEDs (e.g. a thread setting the - * txbuff values) - */ -void leds_init(void){ - for(int i = 0; i < RESET_SIZE; i++) - txbuf[DATA_SIZE+i] = 0x00; - spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */ - spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */ - spiSelect(&LEDS_SPI); /* Slave Select assertion. */ - chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL); -#if LED_SPIRAL - chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA), - NORMALPRIO, hsv_transThread, NULL); -#endif -} - -/* - * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to - * the ws2812b protocol, we use this helper function to translate bytes into - * 0s and 1s for the LED (with the appropriate timing). - */ -static uint8_t get_protocol_eq(uint8_t data, int pos){ - uint8_t eq = 0; - if (data & (1 << (2*(3-pos)))) - eq = 0b1110; - else - eq = 0b1000; - if (data & (2 << (2*(3-pos)))) - eq += 0b11100000; - else - eq += 0b10000000; - return eq; -} - -// -///* -// * If you want to set a LED's color in the RGB color space, simply call this -// * function with a hsv_color containing the desired color and the index of the -// * led on the LED strip (starting from 0, the first one being the closest the -// * first plugged to the board) -// * -// * Only set the color of the LEDs through the functions given by this API -// * (unless you really know what you are doing) -// */ -void set_led_color_rgb(LED_TYPE color, int pos){ - for(int j = 0; j < 4; j++) - txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j); - for(int j = 0; j < 4; j++) - txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j); - for(int j = 0; j < 4; j++) - txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j); -} - - -void WS2812_init(void) { - leds_init(); -} - -void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) { - uint8_t i = 0; - while (i < number_of_leds) { - set_led_color_rgb(ledarray[i], i); - i++; - } -} - - -void set_leds_color_rgb(LED_TYPE color){ - for(int i = 0; i < NB_LEDS; i++) - set_led_color_rgb(color, i); -} - - -void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) { - -} diff --git a/keyboards/cannonkeys/stm32f072/ws2812.h b/keyboards/cannonkeys/stm32f072/ws2812.h deleted file mode 100644 index 9b545fcd533..00000000000 --- a/keyboards/cannonkeys/stm32f072/ws2812.h +++ /dev/null @@ -1,19 +0,0 @@ -#pragma once - -#include "hal.h" -#include "color.h" - -void set_leds_color_rgb(LED_TYPE color); -void set_led_color_rgb(LED_TYPE color, int pos); -void leds_init(void); - - - // This is what users will use to interface with this -void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); -void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); - - -void WS2812_init(void); -void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue ); -void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); -void WS2812_send_colors(void); diff --git a/keyboards/canoe/canoe.c b/keyboards/canoe/canoe.c deleted file mode 100644 index a7427e15286..00000000000 --- a/keyboards/canoe/canoe.c +++ /dev/null @@ -1,96 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "canoe.h" -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "i2c.h" -#include "rgblight.h" -#endif - -#ifdef BACKLIGHT_ENABLE -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); - } else { - // Turn on the lights - PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - } -} - -void backlight_init_ports(void) { - DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); -} - -#endif - -// for keyboard subdirectory level init functions -// @Override -void matrix_init_kb(void) { - // call user level keymaps, if any - matrix_init_user(); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i=0; i - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CANOE_H -#define CANOE_H - -#include "quantum.h" - -#define _x_ KC_NO - -#define LAYOUT_iso( \ - K0D, K0C, K0B, K0A, K09, K08, K07, K06, K05, K04, K03, K02, K01, K00, K0E, \ - K1D, K1C, K1B, K1A, K19, K18, K17, K16, K15, K14, K13, K12, K11, K1E, \ - K2D, K2C, K2B, K2A, K29, K28, K27, K26, K25, K24, K23, K22, K10, K21, K2E, \ - K3D, K4A, K3C, K3B, K3A, K39, K38, K37, K36, K35, K34, K33, K32, K30, K3E, \ - K4D, K4C, K4B, K48, K44, K43, K42, K40, K4E \ -){ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { _x_, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, _x_, K42, K43, K44, _x_, _x_, _x_, K48, _x_, K4A, K4B, K4C, K4D, K4E }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ } \ -} - -#define LAYOUT( \ - K0D, K0C, K0B, K0A, K09, K08, K07, K06, K05, K04, K03, K02, K01, K00, K0E, \ - K1D, K1C, K1B, K1A, K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, K1E, \ - K2D, K2C, K2B, K2A, K29, K28, K27, K26, K25, K24, K23, K22, K21, K2E, \ - K3D, K3C, K3B, K3A, K39, K38, K37, K36, K35, K34, K33, K32, K30, K3E, \ - K4D, K4C, K4B, K48, K44, K43, K42, K40, K4E \ -){ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { _x_, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, _x_, K42, K43, K44, _x_, _x_, _x_, K48, _x_, _x_, K4B, K4C, K4D, K4E }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ - { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ } \ -} - -#endif diff --git a/keyboards/canoe/config.h b/keyboards/canoe/config.h deleted file mode 100644 index cddb749dc1c..00000000000 --- a/keyboards/canoe/config.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CANOE_CONFIG_H -#define CANOE_CONFIG_H - -#include "config_common.h" - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define MANUFACTURER NotActuallyPercent -#define PRODUCT CANOE - -#define RGBLED_NUM 2 - -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 - -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1 } -#define UNUSED_PINS - -#define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - -#define NO_BACKLIGHT_CLOCK -#define BACKLIGHT_LEVELS 1 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 - -#endif diff --git a/keyboards/canoe/i2c.c b/keyboards/canoe/i2c.c deleted file mode 100644 index a4f95213524..00000000000 --- a/keyboards/canoe/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/canoe/info.json b/keyboards/canoe/info.json deleted file mode 100644 index 17bdacaa5db..00000000000 --- a/keyboards/canoe/info.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "keyboard_name": "Canoe", - "maintainer": "qmk", - "url": "", - "height": 6, - "width": 15, - "layouts": { - "LAYOUT_iso": { - "key_count": 68, - "layout": [{"label":"K0D", "x":0, "y":0}, {"label":"K0C", "x":1, "y":0}, {"label":"K0B", "x":2, "y":0}, {"label":"K0A", "x":3, "y":0}, {"label":"K09", "x":4, "y":0}, {"label":"K08", "x":5, "y":0}, {"label":"K07", "x":6, "y":0}, {"label":"K06", "x":7, "y":0}, {"label":"K05", "x":8, "y":0}, {"label":"K04", "x":9, "y":0}, {"label":"K03", "x":10, "y":0}, {"label":"K02", "x":11, "y":0}, {"label":"K01", "x":12, "y":0}, {"label":"K00", "x":13, "y":0, "w":2}, {"label":"K0E", "x":15, "y":0}, {"label":"K1D", "x":0, "y":1, "w":1.5}, {"label":"K1C", "x":1.5, "y":1}, {"label":"K1B", "x":2.5, "y":1}, {"label":"K1A", "x":3.5, "y":1}, {"label":"K19", "x":4.5, "y":1}, {"label":"K18", "x":5.5, "y":1}, {"label":"K17", "x":6.5, "y":1}, {"label":"K16", "x":7.5, "y":1}, {"label":"K15", "x":8.5, "y":1}, {"label":"K14", "x":9.5, "y":1}, {"label":"K13", "x":10.5, "y":1}, {"label":"K12", "x":11.5, "y":1}, {"label":"K11", "x":12.5, "y":1}, {"label":"K1E", "x":15, "y":1}, {"label":"K2D", "x":0, "y":2, "w":1.75}, {"label":"K2C", "x":1.75, "y":2}, {"label":"K2B", "x":2.75, "y":2}, {"label":"K2A", "x":3.75, "y":2}, {"label":"K29", "x":4.75, "y":2}, {"label":"K28", "x":5.75, "y":2}, {"label":"K27", "x":6.75, "y":2}, {"label":"K26", "x":7.75, "y":2}, {"label":"K25", "x":8.75, "y":2}, {"label":"K24", "x":9.75, "y":2}, {"label":"K23", "x":10.75, "y":2}, {"label":"K22", "x":11.75, "y":2}, {"label":"K10", "x":12.75, "y":2}, {"label":"K21", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"K2E", "x":15, "y":2}, {"label":"K3D", "x":0, "y":3, "w":1.25}, {"label":"K4A", "x":1.25, "y":3}, {"label":"K3C", "x":2.25, "y":3}, {"label":"K3B", "x":3.25, "y":3}, {"label":"K3A", "x":4.25, "y":3}, {"label":"K39", "x":5.25, "y":3}, {"label":"K38", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K36", "x":8.25, "y":3}, {"label":"K35", "x":9.25, "y":3}, {"label":"K34", "x":10.25, "y":3}, {"label":"K33", "x":11.25, "y":3}, {"label":"K32", "x":12.25, "y":3, "w":1.75}, {"label":"K30", "x":14, "y":3}, {"label":"K3E", "x":15, "y":3}, {"label":"K4D", "x":0, "y":4, "w":1.25}, {"label":"K4C", "x":1.25, "y":4, "w":1.25}, {"label":"K4B", "x":2.5, "y":4, "w":1.25}, {"label":"K48", "x":3.75, "y":4, "w":6.25}, {"label":"K44", "x":10, "y":4, "w":1.25}, {"label":"K43", "x":11.25, "y":4, "w":1.25}, {"label":"K42", "x":13, "y":4}, {"label":"K40", "x":14, "y":4}, {"label":"K4E", "x":15, "y":4}] - }, - "LAYOUT": { - "key_count": 67, - "layout": [{"label":"K0D", "x":0, "y":0}, {"label":"K0C", "x":1, "y":0}, {"label":"K0B", "x":2, "y":0}, {"label":"K0A", "x":3, "y":0}, {"label":"K09", "x":4, "y":0}, {"label":"K08", "x":5, "y":0}, {"label":"K07", "x":6, "y":0}, {"label":"K06", "x":7, "y":0}, {"label":"K05", "x":8, "y":0}, {"label":"K04", "x":9, "y":0}, {"label":"K03", "x":10, "y":0}, {"label":"K02", "x":11, "y":0}, {"label":"K01", "x":12, "y":0}, {"label":"K00", "x":13, "y":0, "w":2}, {"label":"K0E", "x":15, "y":0}, {"label":"K1D", "x":0, "y":1, "w":1.5}, {"label":"K1C", "x":1.5, "y":1}, {"label":"K1B", "x":2.5, "y":1}, {"label":"K1A", "x":3.5, "y":1}, {"label":"K19", "x":4.5, "y":1}, {"label":"K18", "x":5.5, "y":1}, {"label":"K17", "x":6.5, "y":1}, {"label":"K16", "x":7.5, "y":1}, {"label":"K15", "x":8.5, "y":1}, {"label":"K14", "x":9.5, "y":1}, {"label":"K13", "x":10.5, "y":1}, {"label":"K12", "x":11.5, "y":1}, {"label":"K11", "x":12.5, "y":1}, {"label":"K10", "x":13.5, "y":1, "w":1.5}, {"label":"K1E", "x":15, "y":1}, {"label":"K2D", "x":0, "y":2, "w":1.75}, {"label":"K2C", "x":1.75, "y":2}, {"label":"K2B", "x":2.75, "y":2}, {"label":"K2A", "x":3.75, "y":2}, {"label":"K29", "x":4.75, "y":2}, {"label":"K28", "x":5.75, "y":2}, {"label":"K27", "x":6.75, "y":2}, {"label":"K26", "x":7.75, "y":2}, {"label":"K25", "x":8.75, "y":2}, {"label":"K24", "x":9.75, "y":2}, {"label":"K23", "x":10.75, "y":2}, {"label":"K22", "x":11.75, "y":2}, {"label":"K21", "x":12.75, "y":2, "w":2.25}, {"label":"K2E", "x":15, "y":2}, {"label":"K3D", "x":0, "y":3, "w":2.25}, {"label":"K3C", "x":2.25, "y":3}, {"label":"K3B", "x":3.25, "y":3}, {"label":"K3A", "x":4.25, "y":3}, {"label":"K39", "x":5.25, "y":3}, {"label":"K38", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K36", "x":8.25, "y":3}, {"label":"K35", "x":9.25, "y":3}, {"label":"K34", "x":10.25, "y":3}, {"label":"K33", "x":11.25, "y":3}, {"label":"K32", "x":12.25, "y":3, "w":1.75}, {"label":"K30", "x":14, "y":3}, {"label":"K3E", "x":15, "y":3}, {"label":"K4D", "x":0, "y":4, "w":1.25}, {"label":"K4C", "x":1.25, "y":4, "w":1.25}, {"label":"K4B", "x":2.5, "y":4, "w":1.25}, {"label":"K48", "x":3.75, "y":4, "w":6.25}, {"label":"K44", "x":10, "y":4, "w":1.25}, {"label":"K43", "x":11.25, "y":4, "w":1.25}, {"label":"K42", "x":13, "y":4}, {"label":"K40", "x":14, "y":4}, {"label":"K4E", "x":15, "y":4}] - } - } -} diff --git a/keyboards/canoe/keymaps/boy_314/keymap.c b/keyboards/canoe/keymaps/boy_314/keymap.c deleted file mode 100644 index e3b4c88d285..00000000000 --- a/keyboards/canoe/keymaps/boy_314/keymap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* -Copyright 2019 Boy_314 - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _F1 1 -#define _F2 2 - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGUP, \ - CTL_T(KC_CAPS), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_PGDN, \ - KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, KC_UP, MO(_F2), \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_F1), KC_LEFT, KC_DOWN, KC_RIGHT), - - [_F1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, \ - KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_TRNS, KC_PAUS, KC_BSLS, KC_TRNS, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ - KC_LSPO, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSPC, KC_VOLU, KC_TRNS, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_MPLY, KC_VOLD, KC_MNXT), - - [_F2] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PAUS, \ - KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSLS, KC_SLCK, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ - KC_LSPO, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSPC, KC_PGUP, KC_TRNS, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_HOME, KC_PGDOWN,KC_END) - -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FL 1 - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), - - [_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PAUS, \ - KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSLS, KC_SLCK, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ - KC_LSFT, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSFT, KC_PGUP, KC_END, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_HOME, KC_PGDOWN,KC_END) - -}; diff --git a/keyboards/canoe/keymaps/dhertz/keymap.c b/keyboards/canoe/keymaps/dhertz/keymap.c deleted file mode 100644 index bc8a4bca20f..00000000000 --- a/keyboards/canoe/keymaps/dhertz/keymap.c +++ /dev/null @@ -1,62 +0,0 @@ -#include QMK_KEYBOARD_H -#include "dhertz.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,---------------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp|Del| - * |---------------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Enter|Hom| - * |------------------------------------------------------` |---| - * |SrCtl | A| S| D| F| G| H| J| K| L| ;| '| \| |End| - * |---------------------------------------------------------------| - * |Shif| #| Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| - * |---------------------------------------------------------------| - * |NcCtl| Alt| CTab| LyrSpc | CGv| Alt|Lef|Dow|Rig| - * `---------------------------------------------------------------' - */ - [0] = LAYOUT_iso( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_HOME, - SRCH_CTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, - KC_LSFT, HSH_TLD, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - NC_CTL, KC_LALT, CMD_TAB_CMD, LYR_SPC, CMD_GRV_CMD, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT - ), - /* Layer 1: Special - * ,---------------------------------------------------------------. - * | §| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |Iso| - * |---------------------------------------------------------------| - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------` |---| - * | | | | | | | | | |CSL| | | `| | | - * |---------------------------------------------------------------| - * | | `| | |CAC| | | | | | | | |PgU| | - * |---------------------------------------------------------------| - * | | | | | | |Hom|PgD|End| - * `---------------------------------------------------------------' - */ - [1] = LAYOUT_iso( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F10, KC_F11, KC_TRNS, ISO_COUNTRY_CODE, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CMD_SFT_L, KC_TRNS, KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS, CMD_ALT_C, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDOWN, KC_END - ), -}; - -void matrix_init_keymap(void) { - rgblight_enable_noeeprom(); - rgblight_sethsv_teal(); -} - -uint32_t layer_state_set_keymap(uint32_t state) { - switch (biton32(state)) { - case 1: - rgblight_sethsv_noeeprom_magenta(); - break; - default: // for any other layers, or the default layer - rgblight_sethsv_noeeprom_cyan(); - break; - } - return state; -} diff --git a/keyboards/canoe/keymaps/iso/keymap.c b/keyboards/canoe/keymaps/iso/keymap.c deleted file mode 100644 index 89af719d128..00000000000 --- a/keyboards/canoe/keymaps/iso/keymap.c +++ /dev/null @@ -1,29 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_iso( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_END, - KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPACE, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT - ), -}; - diff --git a/keyboards/canoe/matrix.c b/keyboards/canoe/matrix.c deleted file mode 100644 index 245813dfd2d..00000000000 --- a/keyboards/canoe/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/canoe/readme.md b/keyboards/canoe/readme.md deleted file mode 100644 index 729ab1a0faa..00000000000 --- a/keyboards/canoe/readme.md +++ /dev/null @@ -1,44 +0,0 @@ -CANOE -======== - -A 65% keyboard with some RGB - -Keyboard Maintainer: QMK Community -Hardware Supported: Canoe -Hardware Availability: https://geekhack.org/index.php?topic=92418.0 - -Make example for this keyboard (after setting up your build environment): - - make canoe:default - -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - pip install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/canoe/rules.mk b/keyboards/canoe/rules.mk deleted file mode 100644 index 3d7bc0215d2..00000000000 --- a/keyboards/canoe/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = full -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/canoe/usbconfig.h b/keyboards/canoe/usbconfig.h deleted file mode 100644 index d2d848fcdc8..00000000000 --- a/keyboards/canoe/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/catch22/README.md b/keyboards/catch22/README.md deleted file mode 100644 index 8d4a22398f1..00000000000 --- a/keyboards/catch22/README.md +++ /dev/null @@ -1,17 +0,0 @@ -# Catch 22 Budget Hotswap Macropad - -GB by /u/rockydbull run in July 2018, PCB designed with help from /u/Kilgarah. - -Designed to be a budget project board to enjoy hotswapping/switch testing/macro making fun. The board is controlled by a pro micro clone made famous by other projects like the lets split, iris, and nyquist and allows for full QMK implementation. Each Catch22 kit will contain: - - * 2 pcbs (one to solder to and one to be a base)(green color) - * 1 pcb material switch plate( green color) with cut out for pcb mount cherry stabilizers - * 40 throughhole diodes (22 for the pcb and the remaining as extras in case you lose one and to use to make the pro micro removeable without desoldering) - * 22 Kailh hotswap sockets - * 1 smd reset button - * 1 dip socket to mount between the pcb and pro micro if you choose to make it removeable without desoldering - * 5 (12mm) m2 standoffs - * 10 m2 screws - * Genuine Cherry pcb mount 2u stabilizer - * 4 rubber bumpons - * Pro Micro is included in kit diff --git a/keyboards/catch22/catch22.c b/keyboards/catch22/catch22.c deleted file mode 100644 index 11a983936e0..00000000000 --- a/keyboards/catch22/catch22.c +++ /dev/null @@ -1,18 +0,0 @@ -/* -Copyright 2018 QMK Community - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "catch22.h" diff --git a/keyboards/catch22/catch22.h b/keyboards/catch22/catch22.h deleted file mode 100644 index 6eefb9cd516..00000000000 --- a/keyboards/catch22/catch22.h +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2018 QMK Community - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "quantum.h" - -#define LAYOUT( \ - K01, K02, K03, K04, \ - K11, K12, K13, K14, \ -K20, K21, K22, K23, K24, \ -K30, K31, K32, K33, K34, \ - K41, K42, K43, K44 \ -) { \ - { KC_NO, K01, K02, K03, K04 }, \ - { KC_NO, K11, K12, K13, K14 }, \ - { K20, K21, K22, K23, K24 }, \ - { K30, K31, K32, K33, K34 }, \ - { KC_NO, K41, K42, K43, K44 }, \ -} diff --git a/keyboards/catch22/config.h b/keyboards/catch22/config.h deleted file mode 100644 index 05c336a3ff0..00000000000 --- a/keyboards/catch22/config.h +++ /dev/null @@ -1,53 +0,0 @@ -/* -Copyright 2018 QMK Contributors - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xCA22 -#define DEVICE_VER 0x0001 -#define MANUFACTURER rockydbull -#define PRODUCT Catch22 Hotswap Macropad -#define DESCRIPTION Budget 22 Key Hotswap Macropad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 5 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } -#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 } -#define UNUSED_PINS { } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -// #define DEBOUNCE 0 - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN F6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 6 -#endif diff --git a/keyboards/catch22/info.json b/keyboards/catch22/info.json deleted file mode 100644 index eb95b8561dd..00000000000 --- a/keyboards/catch22/info.json +++ /dev/null @@ -1,10 +0,0 @@ -{ - "keyboard_name": "catch22", - "width": 5, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"A", "x":1, "y":0}, {"label":"B", "x":2, "y":0}, {"label":"C", "x":3, "y":0}, {"label":"D", "x":4, "y":0}, {"label":"E", "x":1, "y":1}, {"label":"F", "x":2, "y":1}, {"label":"G", "x":3, "y":1}, {"label":"H", "x":4, "y":1}, {"label":"I", "x":0, "y":2}, {"label":"J", "x":1, "y":2}, {"label":"K", "x":2, "y":2}, {"label":"L", "x":3, "y":2}, {"label":"M", "x":4, "y":2}, {"label":"1", "x":0, "y":3, "h":2}, {"label":"N", "x":1, "y":3}, {"label":"O", "x":2, "y":3}, {"label":"P", "x":3, "y":3}, {"label":"Q", "x":4, "y":3}, {"label":"R", "x":1, "y":4}, {"label":"S", "x":2, "y":4}, {"label":"T", "x":3, "y":4}, {"label":"U", "x":4, "y":4}] - } - } -} diff --git a/keyboards/catch22/keymaps/default/keymap.c b/keyboards/catch22/keymaps/default/keymap.c deleted file mode 100644 index 3216c02707f..00000000000 --- a/keyboards/catch22/keymaps/default/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _BASE 0 -#define _FN 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_BASE] = LAYOUT( /* Base */ - KC_NLCK, KC_PSLS, KC_PAST, KC_BSPC, \ - KC_P7, KC_P8, KC_P9, KC_PEQL, \ - MO(_FN), KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_PENT, KC_P1, KC_P2, KC_P3, KC_PMNS, \ - KC_SPC, KC_P0, KC_PDOT, KC_TAB \ -), -[_FN] = LAYOUT( - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUI, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, \ - KC_2, _______, _______, _______, _______, \ - _______, _______, _______, _______ \ -), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function -{ - return MACRO_NONE; -}; diff --git a/keyboards/catch22/rules.mk b/keyboards/catch22/rules.mk deleted file mode 100644 index 2b76e465cfc..00000000000 --- a/keyboards/catch22/rules.mk +++ /dev/null @@ -1,60 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled -AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below -RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. - diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 2809c9d184e..00000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index b31d74307b3..00000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOC_LED 13 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png deleted file mode 100644 index c44a7d9ebcb..00000000000 Binary files a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png and /dev/null differ diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index 7e9f90853e3..00000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -void enter_bootloader_mode_if_requested(void); - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_clock_init(); -} - - - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index 173f7b60542..00000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,923 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c6..00000000000 --- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/chibios_test/boards/maple_mini_mapping.png b/keyboards/chibios_test/boards/maple_mini_mapping.png deleted file mode 100644 index 12cfa81db26..00000000000 Binary files a/keyboards/chibios_test/boards/maple_mini_mapping.png and /dev/null differ diff --git a/keyboards/chibios_test/chibios_test.c b/keyboards/chibios_test/chibios_test.c deleted file mode 100644 index efe2d4a5d63..00000000000 --- a/keyboards/chibios_test/chibios_test.c +++ /dev/null @@ -1 +0,0 @@ -#include "chibios_test.h" diff --git a/keyboards/chibios_test/chibios_test.h b/keyboards/chibios_test/chibios_test.h deleted file mode 100644 index 9fc996ff755..00000000000 --- a/keyboards/chibios_test/chibios_test.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ -#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ - -#include "quantum.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */ diff --git a/keyboards/chibios_test/config.h b/keyboards/chibios_test/config.h deleted file mode 100644 index 91350c4457c..00000000000 --- a/keyboards/chibios_test/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER QMK -#define PRODUCT ChibiOS QMK test -#define DESCRIPTION QMK keyboard firmware test for ChibiOS - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/chibios_test/keymaps/default/keymap.c b/keyboards/chibios_test/keymaps/default/keymap.c deleted file mode 100644 index 0edc697bf9f..00000000000 --- a/keyboards/chibios_test/keymaps/default/keymap.c +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_CAPS}}, // test with KC_CAPS, KC_A, RESET -}; diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/chibios_test/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index f9bfe9c0052..00000000000 --- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 128k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/chibios_test/readme.md b/keyboards/chibios_test/readme.md deleted file mode 100644 index 096ecd6aea4..00000000000 --- a/keyboards/chibios_test/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# ChibiOS Test Keyboards - -Test code for several ARM based ChibiOS boards \ No newline at end of file diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk deleted file mode 100644 index 45f03be0208..00000000000 --- a/keyboards/chibios_test/rules.mk +++ /dev/null @@ -1,10 +0,0 @@ -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = yes # Custom matrix file - -DEFAULT_FOLDER = chibios_test/stm32_f072_onekey \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h deleted file mode 100644 index 02c48c4e6dc..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f072_onekey/chconf.h b/keyboards/chibios_test/stm32_f072_onekey/chconf.h deleted file mode 100644 index 99fa8ce3982..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/config.h b/keyboards/chibios_test/stm32_f072_onekey/config.h deleted file mode 100644 index bbaf0dc4bfb..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ - -#include "../config.h" - - -#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/halconf.h b/keyboards/chibios_test/stm32_f072_onekey/halconf.h deleted file mode 100644 index 8b9724b1a30..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f072_onekey/led.c b/keyboards/chibios_test/stm32_f072_onekey/led.c deleted file mode 100644 index 18edb8ba89b..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/led.c +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - (void)usb_led; - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0) -#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0) -#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0) - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c deleted file mode 100644 index 820d062ffde..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "stm32_f072_onekey.h" diff --git a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h deleted file mode 100644 index 345bf3bede3..00000000000 --- a/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef STM32_F072_ONEKEY_H -#define STM32_F072_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h deleted file mode 100644 index 0f45203cb61..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/chibios_test/stm32_f103_onekey/chconf.h b/keyboards/chibios_test/stm32_f103_onekey/chconf.h deleted file mode 100644 index dfb1f9dfb9e..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 2000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/config.h b/keyboards/chibios_test/stm32_f103_onekey/config.h deleted file mode 100644 index de0b906f358..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ - -#include "../config.h" - -#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/flash.sh b/keyboards/chibios_test/stm32_f103_onekey/flash.sh deleted file mode 100755 index 15501dfa573..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/flash.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin diff --git a/keyboards/chibios_test/stm32_f103_onekey/halconf.h b/keyboards/chibios_test/stm32_f103_onekey/halconf.h deleted file mode 100644 index 8b9724b1a30..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/chibios_test/stm32_f103_onekey/led.c b/keyboards/chibios_test/stm32_f103_onekey/led.c deleted file mode 100644 index f5c55f7d9ba..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -/* generic STM32F103C8T6 board */ -#ifdef BOARD_GENERIC_STM32_F103 -#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0) -#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0) -#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0) -#endif - -/* Maple Mini */ -#ifdef BOARD_MAPLEMINI_STM32_F103 -#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0) -#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0) -#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0) -#endif - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 \ No newline at end of file diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c deleted file mode 100644 index 7fa99bb28d5..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "stm32_f103_onekey.h" diff --git a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h deleted file mode 100644 index b9ba65a9e99..00000000000 --- a/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef STM32_F103_ONEKEY_H -#define STM32_F103_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h deleted file mode 100644 index 3294ac7eeef..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/config.h b/keyboards/chibios_test/teensy_lc_onekey/config.h deleted file mode 100644 index d9eb05d2ac2..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ -#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ - -#include "../config.h" - -#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h deleted file mode 100644 index 1b6f2adc206..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ - diff --git a/keyboards/chibios_test/teensy_lc_onekey/instructions.md b/keyboards/chibios_test/teensy_lc_onekey/instructions.md deleted file mode 100644 index 66f73bf14b8..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/instructions.md +++ /dev/null @@ -1,97 +0,0 @@ -# Teensy LC, 3.0, 3.1, 3.2 support - -These ARM Teensies are now supported through [ChibiOS](http://chibios.org). - -## Installing the ARM toolchain - -You'll need to install an ARM toolchain, there is now a nice documentation about the two AVR/ARM toolchain : https://docs.qmk.fm/getting_started_build_tools.html and you can just run `sudo util/install_dependencies.sh`. -This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting. - -You can find others way with the [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. - -## Installing ChibiOS - -Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). - -### If you’re using git - -Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory. - -### If you’re not using Git - -If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-`) to `lib/chibios/chibios` (so that the file `lib/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-` to `lib/chibios/chibios-contrib`. - -(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.) - -(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.) - -This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`. - -For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`. - -## About this onekey example - -It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`. - -## Credits - -TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard). - -The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions. - -## Features that are not implemented yet - -Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome). - -# Matrix programming notes - -The notes below explain what commands can be used to examine and set the status of Teensy pins. - -## ChibiOS pin manipulation basics - -### Pins - -Each pin sits on a "port", each of which comprises at most 32 individual pins. -So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number. - -Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number. - -### Mode - -A MCU pin can be in several modes. The basic command to set a pin mode is - - palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP); - -The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW). - -### Setting - -Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by - - palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -or set LOW by - - palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -Toggling can be done with - - palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -Alternatively, you can use - - palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit); - -where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`). - -### Reading - -Reading pin status is done with - - palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn); - -The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`). - -### Further docs - -All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html). diff --git a/keyboards/chibios_test/teensy_lc_onekey/led.c b/keyboards/chibios_test/teensy_lc_onekey/led.c deleted file mode 100644 index dfa60c10767..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/led.c +++ /dev/null @@ -1,32 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) { - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ch.h" -#include "hal.h" - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0) -#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) -#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0) - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6 \ No newline at end of file diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c deleted file mode 100644 index b6c4327932a..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c +++ /dev/null @@ -1 +0,0 @@ -#include "teensy_lc_onekey.h" diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h deleted file mode 100644 index e94c13b663c..00000000000 --- a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef TEENSY_LC_ONEKEY_H -#define TEENSY_LC_ONEKEY_H -#include "chibios_test.h" - -#define LAYOUT(k00) {{ k00 }} - -#endif diff --git a/keyboards/chimera_ergo/chimera_ergo.c b/keyboards/chimera_ergo/chimera_ergo.c deleted file mode 100644 index 29470f90805..00000000000 --- a/keyboards/chimera_ergo/chimera_ergo.c +++ /dev/null @@ -1,31 +0,0 @@ -#include "chimera_ergo.h" - -void uart_init(void) { - SERIAL_UART_INIT(); -} - -void led_init(void) { - DDRD |= (1<<1); - PORTD |= (1<<1); - DDRF |= (1<<4) | (1<<5); - PORTF |= (1<<4) | (1<<5); -} - - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - uart_init(); - led_init(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} - -void led_set_kb(uint8_t usb_led) { - -} diff --git a/keyboards/chimera_ergo/chimera_ergo.h b/keyboards/chimera_ergo/chimera_ergo.h deleted file mode 100644 index a9275e3a85c..00000000000 --- a/keyboards/chimera_ergo/chimera_ergo.h +++ /dev/null @@ -1,82 +0,0 @@ -#ifndef CHIMERA_ERGO_H -#define CHIMERA_ERGO_H - -#include "quantum.h" -#include "matrix.h" -#include "backlight.h" -#include - -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) - -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on - -/* -#define LED_B 5 -#define LED_R 6 -#define LED_G 7 - -#define all_leds_off PORTF &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER unknown -#define PRODUCT Chimera Ergo -#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ergo - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -#define ONESHOT_TIMEOUT 500 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_DATA UDR1 -#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT() do { \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ - } while(0) - -#endif diff --git a/keyboards/chimera_ergo/info.json b/keyboards/chimera_ergo/info.json deleted file mode 100644 index c614480882f..00000000000 --- a/keyboards/chimera_ergo/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Chimera Ergo", - "url": "", - "maintainer": "qmk", - "width": 13, - "height": 6, - "layouts": { - "LAYOUT": { - "key_count": 52, - "layout": [{"label":"k00", "x":0, "y":1}, {"label":"k01", "x":1, "y":0.75}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.25}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":7, "y":0.5}, {"label":"k07", "x":8, "y":0.25}, {"label":"k08", "x":9, "y":0}, {"label":"k09", "x":10, "y":0.25}, {"label":"k10", "x":11, "y":0.75}, {"label":"k11", "x":12, "y":1}, {"label":"k12", "x":0, "y":2}, {"label":"k13", "x":1, "y":1.75}, {"label":"k14", "x":2, "y":1.25}, {"label":"k15", "x":3, "y":1}, {"label":"k16", "x":4, "y":1.25}, {"label":"k17", "x":5, "y":1.5}, {"label":"k18", "x":7, "y":1.5}, {"label":"k19", "x":8, "y":1.25}, {"label":"k20", "x":9, "y":1}, {"label":"k21", "x":10, "y":1.25}, {"label":"k22", "x":11, "y":1.75}, {"label":"k23", "x":12, "y":2}, {"label":"k24", "x":0, "y":3}, {"label":"k25", "x":1, "y":2.75}, {"label":"k26", "x":2, "y":2.25}, {"label":"k27", "x":3, "y":2}, {"label":"k28", "x":4, "y":2.25}, {"label":"k29", "x":5, "y":2.5}, {"label":"k30", "x":7, "y":2.5}, {"label":"k31", "x":8, "y":2.25}, {"label":"k32", "x":9, "y":2}, {"label":"k33", "x":10, "y":2.25}, {"label":"k34", "x":11, "y":2.75}, {"label":"k35", "x":12, "y":3}, {"label":"k36", "x":0, "y":4}, {"label":"k37", "x":1, "y":3.75}, {"label":"k38", "x":2, "y":3.25}, {"label":"k39", "x":3, "y":3}, {"label":"k40", "x":4, "y":3.25}, {"label":"k41", "x":5, "y":3.5}, {"label":"k42", "x":7, "y":3.5}, {"label":"k43", "x":8, "y":3.25}, {"label":"k44", "x":9, "y":3}, {"label":"k45", "x":10, "y":3.25}, {"label":"k46", "x":11, "y":3.75}, {"label":"k47", "x":12, "y":4}, {"label":"k48", "x":4, "y":4.75}, {"label":"k49", "x":5, "y":5}, {"label":"k50", "x":7, "y":5}, {"label":"k51", "x":8, "y":4.75}] - } - } -} diff --git a/keyboards/chimera_ergo/keymaps/default/keymap.c b/keyboards/chimera_ergo/keymaps/default/keymap.c deleted file mode 100644 index 0b60b1dafaf..00000000000 --- a/keyboards/chimera_ergo/keymaps/default/keymap.c +++ /dev/null @@ -1,158 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum chimera_ergo_layers -{ - _QWERTY, - _CAPS, - _NUMPAD, - _SYMBOLS, - _MACROS, - _NAV -}; - -#define SC_NMPD TG(_NUMPAD) -#define SC_SYMB TG(_SYMBOLS) -#define SC_SPFN LT(_NAV,KC_EQL) -#define SC_SCTL MT(MOD_LCTL, KC_LBRC) -#define SC_SCTR MT(MOD_LCTL, KC_RBRC) -#define SC_SPLT MT(MOD_LALT, KC_MINS) -#define SC_SPRT MT(MOD_LALT, KC_1) -#define SC_GBRC MT(MOD_RGUI, KC_RBRC) -#define SC_MESC LT(_MACROS, KC_ESC) -#define SC_INCL M(0) -#define SC_PULL M(1) -#define SC_PUSH M(2) -#define SC_SCAP M(3) -#define SC_SCOF M(4) -#define SC_CAD LALT(LCTL(KC_DEL)) - -#define LONGPRESS_DELAY 150 -//#define LAYER_TOGGLE_DELAY 300 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( - KC_LBRC, KC_1, SC_SCTL, SC_SPLT, SC_SPFN, KC_5, KC_6, SC_GBRC, SC_SPRT, SC_SCTR, KC_0, KC_RBRC, - SC_MESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_QUOT, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, - SC_NMPD, KC_BSPC, KC_SPC, SC_SYMB - ), - - [_CAPS] = LAYOUT( - _______, KC_UNDS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______, - SC_SCOF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, SC_SCOF, - _______, _______, _______, _______ - ), - - [_NUMPAD] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, _______, - _______, _______, KC_COLN, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_ASTR, _______, - _______, _______, KC_DOT , _______, _______, _______, _______, KC_4, KC_5, KC_6, KC_PLUS, _______, - _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_SLSH, _______, - _______, _______, _______, KC_0 - ), - - [_SYMBOLS] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSLS, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TILD, KC_EQL, KC_UNDS, KC_LCBR, KC_RCBR, _______, - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_GRV, KC_PLUS, KC_MINS, KC_LBRC, KC_RBRC, _______, - KC_PIPE, _______, _______, _______ - ), - - [_MACROS] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, SC_INCL, _______, _______, _______, - _______, _______, _______, SC_CAD, _______, _______, _______, _______, _______, _______, _______, _______, - SC_SCAP, _______, _______, _______, _______, _______, _______, _______, SC_PULL, SC_PUSH, _______, _______, - _______, _______, _______, _______ - ), - - [_NAV] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, _______, - _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_DEL, _______, _______ - ), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - /* include some kind of library or header */ - case 0: - if (record->event.pressed) { - SEND_STRING("#include <>"); - return MACRO( T(LEFT), END); - } - break; - case 1: - if (record->event.pressed) { - SEND_STRING("git pull"); - return MACRO( T(ENT), END ); - } - break; - case 2: - if (record->event.pressed){ - SEND_STRING("git push"); - return MACRO( T(ENT), END ); - } - break; - case 3: - if (record->event.pressed){ - layer_on(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - } - break; - case 4: - if (record->event.pressed){ - layer_off(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - switch (layer) { - case _QWERTY: - set_led_green; - break; - case _CAPS: - set_led_white; - break; - case _NUMPAD: - set_led_blue; - break; - case _SYMBOLS: - set_led_red; - break; - case _NAV: - set_led_magenta; - break; - case _MACROS: - set_led_cyan; - break; - default: - set_led_green; - break; - } -}; diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c deleted file mode 100644 index d512a51d973..00000000000 --- a/keyboards/chimera_ergo/matrix.c +++ /dev/null @@ -1,164 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include -#if defined(__AVR__) -#include -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - SERIAL_UART_INIT(); - - uint32_t timeout = 0; - - //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; - - //trust the external keystates entirely, erase the last data - uint8_t uart_data[14] = {0}; - - //there are 10 bytes corresponding to 10 columns, and an end byte - for (uint8_t i = 0; i < 14; i++) { - //wait for the serial data, timeout if it's been too long - //this only happened in testing with a loose wire, but does no - //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ - timeout++; - if (timeout > 10000){ - break; - } - } - uart_data[i] = SERIAL_UART_DATA; - } - - //check for the end packet, the key state bytes use the LSBs, so 0xE0 - //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { - //shifting and transferring the keystates to the QMK matrix variable - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; - } - } - - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< - -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) - -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on - -/* -#define LED_B 5 -#define LED_R 6 -#define LED_G 7 - -#define all_leds_off PORTF &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER unknown -#define PRODUCT Chimera Lets Split -#define DESCRIPTION q.m.k. keyboard firmware for Chimera Lets Split - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -#define ONESHOT_TIMEOUT 500 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_DATA UDR1 -#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT() do { \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ - } while(0) - -#endif diff --git a/keyboards/chimera_ls/info.json b/keyboards/chimera_ls/info.json deleted file mode 100644 index 077a7607969..00000000000 --- a/keyboards/chimera_ls/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Chimera LS", - "url": "", - "maintainer": "qmk", - "width": 13, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x12": { - "key_count": 48, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}] - } - } -} diff --git a/keyboards/chimera_ls/keymaps/default/keymap.c b/keyboards/chimera_ls/keymaps/default/keymap.c deleted file mode 100644 index 0affeef3894..00000000000 --- a/keyboards/chimera_ls/keymaps/default/keymap.c +++ /dev/null @@ -1,186 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum chimera_lets_split_layers -{ - _QWERTY, - _CAPS, - _NUMPAD, - _SYMBOLS, - _MACROS, - _NAV -}; - -#define KC_NMPD TG(_NUMPAD) -#define KC_SYMB TG(_SYMBOLS) -#define KC_SPFN LT(_NAV,KC_EQL) -#define KC_SCTL MT(MOD_LCTL, KC_BSLS) -#define KC_SCTR MT(MOD_LCTL, KC_RBRC) -#define KC_SPLT MT(MOD_LALT, KC_MINS) -#define KC_MESC LT(_MACROS, KC_ESC) -#define KC_CAD LALT(LCTL(KC_DEL)) - -enum custom_keycodes { - KC_INCL = SAFE_RANGE, - KC_PULL, - KC_PUSH, - KC_SCAP, - KC_SCOF -}; - -#define LONGPRESS_DELAY 150 -//#define LAYER_TOGGLE_DELAY 300 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - KC_MESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_SCTL, KC_SPFN, KC_SPLT, KC_AMPR, KC_NMPD, KC_SPC, KC_SPC, KC_SYMB, KC_ASTR, KC_EXLM, KC_LBRC, KC_SCTR - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - - [_CAPS] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, KC_UNDS, _______, _______, _______, _______, _______, _______, _______, _______, _______ - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - - - [_NUMPAD] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_MINS, KC_QUOT, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, KC_PLUS, KC_ENT, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LSFT, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_ASTR, KC_EQL, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, KC_BSPC, KC_SPC, KC_0, KC_0, KC_DOT, KC_SLSH, _______ - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - - [_SYMBOLS] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_QUOT, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TILD, KC_EQL, KC_UNDS, KC_LCBR, KC_RCBR, KC_PIPE, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_GRV, KC_PLUS, KC_MINS, KC_LBRC, KC_RBRC, KC_BSLS, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, XXXXXXX, KC_BSPC, KC_SPC, _______, _______, _______, _______, _______ - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - - [_NAV] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, _______, _______, _______, KC_DEL, KC_BSPC, _______, KC_HOME, KC_UP, KC_END, KC_INS, KC_PSCR, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, KC_LSFT, KC_LCTL, KC_ENT, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______, _______ - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - - [_MACROS] = LAYOUT_ortho_4x12( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, _______, _______, _______, _______, _______, _______, _______, KC_INCL, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, KC_CAD, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_SCAP, _______, _______, _______, _______, _______, _______, _______, KC_PULL, KC_PUSH, _______, KC_SCAP, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - //`--------+--------+--------+--------+--------+--------' `--------+--------+--------+--------+--------+--------' - ), - -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - /* include some kind of library or header */ - case KC_INCL: - if (record->event.pressed) { - SEND_STRING("#include <>" SS_TAP(X_LEFT) ); - return false; - } - break; - case KC_PULL: - if (record->event.pressed) { - SEND_STRING("git pull" SS_TAP(X_ENTER) ); - return false; - } - break; - case KC_PUSH: - if (record->event.pressed){ - SEND_STRING("git push" SS_TAP(X_ENTER) ); - return false; - } - break; - case KC_SCAP: - if (record->event.pressed){ - layer_on(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - return false; - } - break; - case KC_SCOF: - if (record->event.pressed){ - layer_off(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - return false; - } - break; - } - return true; -}; - - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - switch (layer) { - case _QWERTY: - set_led_green; - break; - case _CAPS: - set_led_white; - break; - case _NUMPAD: - set_led_blue; - break; - case _SYMBOLS: - set_led_red; - break; - case _NAV: - set_led_magenta; - break; - case _MACROS: - set_led_cyan; - break; - default: - set_led_green; - break; - } -}; diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c deleted file mode 100644 index 72fe4413704..00000000000 --- a/keyboards/chimera_ls/matrix.c +++ /dev/null @@ -1,168 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include -#if defined(__AVR__) -#include -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#elif (MATRIX_COLS <= 64) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop64(matrix[i]) -# define ROW_SHIFTER ((uint64_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - SERIAL_UART_INIT(); - - uint32_t timeout = 0; - - //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; - - //trust the external keystates entirely, erase the last data - uint8_t uart_data[11] = {0}; - - //there are 10 bytes corresponding to 10 columns, and an end byte - for (uint8_t i = 0; i < 11; i++) { - //wait for the serial data, timeout if it's been too long - //this only happened in testing with a loose wire, but does no - //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ - timeout++; - if (timeout > 10000){ - break; - } - } - uart_data[i] = SERIAL_UART_DATA; - } - - //check for the end packet, the key state bytes use the LSBs, so 0xE0 - //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { - //shifting and transferring the keystates to the QMK matrix variable - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; - } - } - - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< - -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) - -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on - -/* -#define LED_B 5 -#define LED_R 6 -#define LED_G 7 - -#define all_leds_off PORTF &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER unknown -#define PRODUCT Chimera Ortho -#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ortho - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 10 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -#define ONESHOT_TIMEOUT 500 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_DATA UDR1 -#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT() do { \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ - } while(0) - -#endif diff --git a/keyboards/chimera_ortho/info.json b/keyboards/chimera_ortho/info.json deleted file mode 100644 index 3f8481be4b6..00000000000 --- a/keyboards/chimera_ortho/info.json +++ /dev/null @@ -1,59 +0,0 @@ -{ - "keyboard_name": "Chimera Ortho", - "keyboard_folder": "chimera_ortho", - "maintainer": "qmk", - "width": 15.5, - "height": 4.25, - "layouts": { - "LAYOUT": { - "layout": [ - {"label": "Esc", "x": 0, "y": 0}, - {"label": "Q", "x": 1, "y": 0}, - {"label": "W", "x": 2, "y": 0}, - {"label": "E", "x": 3, "y": 0}, - {"label": "R", "x": 4, "y": 0}, - {"label": "T", "x": 5, "y": 0}, - {"label": "{", "x": 6, "y": 0}, - {"label": "}", "x": 8.5, "y": 0}, - {"label": "Y", "x": 9.5, "y": 0}, - {"label": "U", "x": 10.5, "y": 0}, - {"label": "I", "x": 11.5, "y": 0}, - {"label": "O", "x": 12.5, "y": 0}, - {"label": "P", "x": 13.5, "y": 0}, - {"label": "\"", "x": 14.5, "y": 0}, - {"label": "Tab", "x": 0, "y": 1}, - {"label": "A", "x": 1, "y": 1}, - {"label": "S", "x": 2, "y": 1}, - {"label": "D", "x": 3, "y": 1}, - {"label": "F", "x": 4, "y": 1}, - {"label": "G", "x": 5, "y": 1}, - {"label": "-", "x": 6, "y": 1}, - {"label": "1", "x": 8.5, "y": 1}, - {"label": "H", "x": 9.5, "y": 1}, - {"label": "J", "x": 10.5, "y": 1}, - {"label": "K", "x": 11.5, "y": 1}, - {"label": "L", "x": 12.5, "y": 1}, - {"label": ";", "x": 13.5, "y": 1}, - {"label": "Enter", "x": 14.5, "y": 1}, - {"label": "(", "x": 0, "y": 2}, - {"label": "Z", "x": 1, "y": 2}, - {"label": "X", "x": 2, "y": 2}, - {"label": "C", "x": 3, "y": 2}, - {"label": "V", "x": 4, "y": 2}, - {"label": "B", "x": 5, "y": 2}, - {"label": "=", "x": 6, "y": 2}, - {"label": "8", "x": 8.5, "y": 2}, - {"label": "N", "x": 9.5, "y": 2}, - {"label": "M", "x": 10.5, "y": 2}, - {"label": ", ", "x": 11.5, "y": 2}, - {"label": ".", "x": 12.5, "y": 2}, - {"label": "/", "x": 13.5, "y": 2}, - {"label": ")", "x": 14.5, "y": 2}, - {"label": "Num Layer", "x": 4, "y": 3.25}, - {"label": "Back Space", "x": 5, "y": 3.25}, - {"label": "Space", "x": 9.5, "y": 3.25}, - {"label": "Symbol Layer", "x": 10.5, "y": 3.25} - ] - } - } -} diff --git a/keyboards/chimera_ortho/keymaps/dcompact/config.h b/keyboards/chimera_ortho/keymaps/dcompact/config.h deleted file mode 100644 index d1e5c3aabfc..00000000000 --- a/keyboards/chimera_ortho/keymaps/dcompact/config.h +++ /dev/null @@ -1,9 +0,0 @@ -#define TAPPING_TERM 150 -#define TAPPING_TOGGLE 2 - -#define MOUSEKEY_DELAY 200 -#define MOUSEKEY_INTERVAL 60 -#define MOUSEKEY_MAX_SPEED 50 -#define MOUSEKEY_TIME_TO_MAX 80 -#define MOUSEKEY_WHEEL_MAX_SPEED 8 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 15 diff --git a/keyboards/chimera_ortho/keymaps/dcompact/keymap.c b/keyboards/chimera_ortho/keymaps/dcompact/keymap.c deleted file mode 100644 index 1c6ef7d6f9a..00000000000 --- a/keyboards/chimera_ortho/keymaps/dcompact/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ -#include QMK_KEYBOARD_H - -enum chimera_ortho_layers -{ - _BASE, - _NAV, - _SYM, - _FUNC, - _MOUSE -}; - -#define KC_NAV MO(_NAV) -#define KC_SYM MO(_SYM) -#define KC_FUNC MO(_FUNC) -#define KC_MOUSE TT(_MOUSE) - -#define KC_DELSHFT SFT_T(KC_DEL) -#define KC_CTLENT CTL_T(KC_ENT) -#define KC_SYMSPC LT(_SYM, KC_SPC) - -#define KC_WK_LEFT LCA(KC_LEFT) -#define KC_WK_DOWN LCA(KC_DOWN) -#define KC_WK_UP LCA(KC_UP) -#define KC_WK_RGHT LCA(KC_RGHT) - -#define KC_QUAKE LCTL(KC_GRAVE) - -#define LONGPRESS_DELAY 150 - -// These are needed because of the 'KC_'-adding macro -// This macro can be found in ../../chimera_ortho.h -#define KC_RESET RESET -#define KC_ KC_TRNS - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BASE] = LAYOUT_kc( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - LALT ,TAB ,QUOT ,COMM ,DOT ,P ,Y ,F ,G ,C ,R ,L ,SLSH ,FUNC - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - ,LGUI ,ESC ,A ,O ,E ,U ,I ,D ,H ,T ,N ,S ,MINS ,MOUSE - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - ,LCTL ,DELSHFT,SCLN ,Q ,J ,K ,X ,B ,M ,W ,V ,Z ,BSPC ,ENTER - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - ,LSHIFT ,NAV ,SYMSPC ,CTLENT - //\-------------------------------+-------+-------+-------/ \-------+-------+---------------------------------------/ - ), - - [_NAV] = LAYOUT_kc( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - , , , , , , , ,HOME ,PGDOWN ,PGUP ,END , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , ,PSCR ,MENU , , , , , ,LEFT ,DOWN ,UP ,RIGHT , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , ,CAPS ,NLCK ,INS , , , , ,WK_LEFT,WK_DOWN,WK_UP ,WK_RGHT, , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , , - //\-------------------------------+-------+-------+-------/ \-------+-------+---------------------------------------/ - ), - - [_SYM] = LAYOUT_kc( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - ,QUAKE ,GRAVE ,TILDE ,BSLASH ,PIPE ,LPRN ,RPRN ,7 ,8 ,9 ,SLSH ,EQUAL , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , ,EXLM ,AT ,HASH ,DLR ,LCBR ,RCBR ,4 ,5 ,6 ,ASTR ,PLUS , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , ,PERC ,CIRC ,AMPR ,ASTR ,LBRC ,RBRC ,1 ,2 ,3 ,MINUS , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , ,0 - //\-------------------------------+-------+-------+-------/ \-------+-------+---------------------------------------/ - ), - - [_FUNC] = LAYOUT_kc( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - ,RESET ,SLEP ,MRWD ,MPLY ,MFFD , , ,F9 ,F10 ,F11 ,F12 , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , ,PWR ,MUTE ,VOLD ,VOLU , , ,F5 ,F6 ,F7 ,F8 , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , ,WAKE ,MPRV ,MPLY ,MNXT , , ,F1 ,F2 ,F3 ,F4 , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , , - //\-------------------------------+-------+-------+-------/ \-------+-------+---------------------------------------/ - ), - - [_MOUSE] = LAYOUT_kc( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - , , , , , , , , , , , , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , ,BTN1 ,BTN3 ,BTN2 , , ,MS_L ,MS_D ,MS_U ,MS_R , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , ,ACL0 ,ACL1 ,ACL2 , , ,WH_L ,WH_D ,WH_U ,WH_R , , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - , , , , - //\-------------------------------+-------+-------+-------/ \-------+-------+---------------------------------------/ - ), -}; - -// These control the color of the LED on the receiver -// For color reference, see ../../chimera_ortho.h -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - switch (layer) { - case _BASE: - set_led_cyan; - break; - case _NAV: - set_led_blue; - break; - case _SYM: - set_led_magenta; - break; - case _FUNC: - set_led_yellow; - default: - set_led_white; - break; - } -}; diff --git a/keyboards/chimera_ortho/keymaps/dcompact/readme.md b/keyboards/chimera_ortho/keymaps/dcompact/readme.md deleted file mode 100644 index bf72567ef10..00000000000 --- a/keyboards/chimera_ortho/keymaps/dcompact/readme.md +++ /dev/null @@ -1,45 +0,0 @@ -# DCompact Layout - -**Dvorak, Layered, Mouse-Enabled, Compact -- Plover coming soon!?!~** - -_See [the layout source](keymap.c) for the actual layout_ - -## Goals - -The following are the goals kept in mind when designing the DCompact -layout: - -- Provide minimal travel distance when typing English or coding -- Consistent muscle memory translation from standard QWERTY -- Stateless typing experience -- OS-agnostic features, macros, and key placement -- Minimize dependence on mouse usage - -These are generally all met or balanced within reason. This layout is -not intended at all to be a familiar layout for much of anyone (except -maybe those who already type in Dvorak) -- this is meant to amplify the -best parts of having limited, ortholinear keys with layering. - -## As Reference Material - -If you're reading this hoping to find reference material to implement -your own layout, then please feel free to copy over this layout and -make edits where you see fit. I removed a lot of the features I felt -extraneous to my usage and simplified style where I felt needed. This -would hopefully mean that my code should feel like a good base to -develop from for those new to QMK. - -_Remember that settings defined in the layout directory override and -merge with those in the keyboard folder_ - -## Relevant Links - -- [Online Dvorak Layout Trainer](https://learn.dvorak.nl/) -- [Dvorak Wikipedia Page](https://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard) -- [QMK Docs](https://docs.qmk.fm/#/) -- [QMK KeyCode Reference](https://docs.qmk.fm/#/keycodes) - -## Contact - -Maintainer: [Dan](https://github.com/loksonarius) - diff --git a/keyboards/chimera_ortho/keymaps/dcompact/rules.mk b/keyboards/chimera_ortho/keymaps/dcompact/rules.mk deleted file mode 100644 index 6c605daecf5..00000000000 --- a/keyboards/chimera_ortho/keymaps/dcompact/rules.mk +++ /dev/null @@ -1 +0,0 @@ -MOUSEKEY_ENABLE = yes diff --git a/keyboards/chimera_ortho/keymaps/default/config.h b/keyboards/chimera_ortho/keymaps/default/config.h deleted file mode 100644 index bdfd4db80fa..00000000000 --- a/keyboards/chimera_ortho/keymaps/default/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -// place overrides here -#define LONGPRESS_DELAY 150 -//#define LAYER_TOGGLE_DELAY 300 diff --git a/keyboards/chimera_ortho/keymaps/default/keymap.c b/keyboards/chimera_ortho/keymaps/default/keymap.c deleted file mode 100644 index 6a676493dda..00000000000 --- a/keyboards/chimera_ortho/keymaps/default/keymap.c +++ /dev/null @@ -1,179 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum chimera_ortho_layers { - _QWERTY, - _CAPS, - _NUMPAD, - _SYMBOLS, - _MACROS, - _NAV -}; - -#define KC_NMPD TG(_NUMPAD) -#define KC_SYMB TG(_SYMBOLS) -#define KC_SPFN LT(_NAV,KC_EQL) -#define KC_SCTL MT(MOD_LCTL, KC_LBRC) -#define KC_SCTR MT(MOD_LCTL, KC_RBRC) -#define KC_SPLT MT(MOD_LALT, KC_MINS) -#define KC_SPRT MT(MOD_LALT, KC_1) -#define KC_GBRC MT(MOD_RGUI, KC_8) -#define KC_GQOT MT(MOD_LGUI, KC_QUOT) -#define KC_MESC LT(_MACROS, KC_ESC) -#define KC_CAD LALT(LCTL(KC_DEL)) - -enum custom_keycodes { - KC_INCL = SAFE_RANGE, - KC_PULL, - KC_PUSH, - KC_SCAP, - KC_SCOF -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - KC_MESC, KC_Q , KC_W , KC_E , KC_R , KC_T ,KC_SCTL, KC_SCTR, KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_QUOT, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G ,KC_SPLT, KC_SPRT, KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_ENT , - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_LSPO, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_SPFN, KC_GBRC, KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSPC, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_NMPD,KC_BSPC, KC_SPC ,KC_SYMB - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ), - - [_CAPS] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,_______,_______,_______,_______,KC_UNDS, _______,_______,_______,_______,_______,KC_COLN,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_SCOF,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,KC_SCOF, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______, _______,_______ - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ), - - [_NUMPAD] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - _______,_______,KC_COLN,_______,_______,_______,_______, _______,_______, KC_7 , KC_8 , KC_9 ,KC_ASTR,KC_MINS, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,KC_DOT ,_______,_______,_______,_______, _______,_______, KC_4 , KC_5 , KC_6 ,KC_PLUS,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,_______,_______,_______,_______,_______, _______,_______, KC_1 , KC_2 , KC_3 ,KC_SLSH,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______, _______, KC_0 - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ), - - [_SYMBOLS] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - _______,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC,_______, _______,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSLS, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,_______, _______,KC_TILD,KC_COLN,KC_UNDS,KC_LCBR,KC_RCBR,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______, KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,_______, _______,KC_GRV ,KC_SCLN,KC_MINS,KC_LBRC,KC_RBRC,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_PIPE,_______, _______,_______ - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ), - - [_NAV] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - _______,_______,_______,_______,_______,_______,_______, _______,_______,_______, KC_UP ,_______,KC_PSCR,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,_______,_______,_______,_______,_______, _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,_______,_______,_______,_______,_______, _______,_______,KC_PGUP,KC_PGDN,_______,_______,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,KC_DEL , _______,_______ - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ), - - [_MACROS] = LAYOUT( - //,-------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. - _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,KC_INCL,_______,_______,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______,_______,KC_CAD ,_______,_______,_______, _______,_______,_______,_______,_______,_______,_______, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - KC_SCAP,_______,_______,_______,_______,_______,_______, _______,_______,_______,KC_PULL,KC_PUSH,_______,KC_SCAP, - //|-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------| - _______,_______, _______,_______ - // \------------------------------+-------+-------+------/ \------+-------+-------+------------------------------/ - ) - -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - /* include some kind of library or header */ - case KC_INCL: - if (record->event.pressed) { - SEND_STRING("#include <>" SS_TAP(X_LEFT)); - } - return false; - case KC_PULL: - if (record->event.pressed) { - SEND_STRING("git pull" SS_TAP(X_ENTER)); - } - return false; - case KC_PUSH: - if (record->event.pressed){ - SEND_STRING("git push" SS_TAP(X_ENTER)); - } - return false; - case KC_SCAP: - if (record->event.pressed){ - layer_on(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - } - return false; - case KC_SCOF: - if (record->event.pressed){ - layer_off(_CAPS); - register_code(KC_CAPSLOCK); - unregister_code(KC_CAPSLOCK); - } - return false; - } - return true; -}; - - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - switch (layer) { - case _QWERTY: - set_led_green; - break; - case _CAPS: - set_led_white; - break; - case _NUMPAD: - set_led_blue; - break; - case _SYMBOLS: - set_led_red; - break; - case _NAV: - set_led_magenta; - break; - case _MACROS: - set_led_cyan; - break; - default: - set_led_green; - break; - } -}; diff --git a/keyboards/chimera_ortho/keymaps/gordon/keymap.c b/keyboards/chimera_ortho/keymaps/gordon/keymap.c deleted file mode 100644 index c0543f2e041..00000000000 --- a/keyboards/chimera_ortho/keymaps/gordon/keymap.c +++ /dev/null @@ -1,380 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H -#include "version.h" -#include "gordon.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define CALTDEL LCTL(LALT(KC_DEL)) -#define TSKMGR LCTL(LSFT(KC_ESC)) - -#define KC_SNAPLEFT LGUI(KC_LEFT) -#define KC_SNAPRIGHT LGUI(KC_RIGHT) -#define KC_SNAPUP LGUI(KC_UP) -#define KC_SNAPDOWN LGUI(KC_DOWN) -#define KC_PREVTAB LCTL(LSFT(KC_TAB)) -#define KC_NEXTTAB LCTL(KC_TAB) -#define KC_WORKRIGHT LCTL(LGUI(KC_RIGHT)) -#define KC_WORKLEFT LCTL(LGUI(KC_LEFT)) - -#define KC_NMPD TG(_NUMPAD) -#define KC_SYMB TG(_SYMBOLS) - -#define KC_SCTL MT(MOD_LCTL, KC_LBRC) -#define KC_SCTR MT(MOD_LCTL, KC_RBRC) -#define KC_SPLT MT(MOD_LALT, KC_MINS) -#define KC_SPRT MT(MOD_LALT, KC_1) -#define KC_GBRC MT(MOD_RGUI, KC_8) -#define KC_GQOT MT(MOD_LGUI, KC_QUOT) -#define KC_CSHW MT(MOD_LCTL|MOD_LSFT,KC_W) - -#define KC_CDEL LCTL(KC_DEL) -#define KC_AUDUP KC_AUDIO_VOL_UP -#define KC_AUDOWN KC_AUDIO_VOL_DOWN - - -#define KC_MEHS MEH_T(KC_S) -#define KC_MEHL MEH_T(KC_L) -#define KC_GWIN GUI_T(KC_G) -#define KC_FCTL CTL_T(KC_F) -#define KC_JCTL CTL_T(KC_J) -#define KC_ZCTL CTL_T(KC_Z) -#define KC_ALTV ALT_T(KC_V) -#define KC_ALTN ALT_T(KC_N) -#define KC_MEHX ALL_T(KC_X) -#define KC_RESET RESET - -//LTs -#define KC_MESC LT(_MACROS, KC_ESC) -#define KC_DNUM LT(_NUMPAD, KC_D) -#define KC_SPFN LT(_NAV,KC_EQL) -#define KC_EMAUS LT(_MOUSE,KC_E) -#define KC_ENAV LT(_NAV,KC_E) -#define KC_INAV LT(_TEXTNAV,KC_I) -#define KC_BSPSYM LT(_SYMBOLS,KC_BSPACE) -#define KC_ENTSYM LT(_SYMBOLS,KC_ENTER) -#define KC_CLNMAUS LT(_MOUSE,KC_SCOLON) - -#define KC_FUNC TT(_FUNCTION) - -//TAP DANCE -#define KC_F6F7 TD(F6F7) -#define KC_ALF4 TD(ALTF4) -#define KC_TTT TD(TTT) -#define KC_ENHM TD(HOME_END) -#define KC_CLPS TD(CALC_PRINTSCREEN) - - -#define KC_INCL M(0) -#define KC_PULL M(1) -#define KC_PUSH M(2) -#define KC_SCAP M(3) -#define KC_SCOF M(4) -#define KC_CAD LALT(LCTL(KC_DEL)) - -#define LONGPRESS_DELAY 150 -//#define LAYER_TOGGLE_DELAY 300 - -// Fillers to make layering more clear -#define KC_ KC_TRNS - -/* TODO: - * - * DONE: RESET and CAD into macro layer. - * DONE: WINUP AND WINDOWN in NAV layer - * DONE: Get rid of caps layer. not sure what it is even for. - * DONE: LMEH - * DONE: plus, divide, multiply on left hand for num layer - * DONE: F1 - F12 on a layer toggle (not a temp toggle but a one shot or something) - * DONE: Volume, page up and down for mouse layer. - * DONE: Add full user files - without using anything. - * DONE: Insert, ctrl delete - * DONE: Home and End - * DONE: Printscreen - - * Easier way to open new terminal (instead of alt + F2) - * Intellij/text navigation layer (ctrl delete could be here). - * Macro for "System.exit(0)" probably macro layer and "c" - * Some sort of tap dance for comma, H, right pinky, and possibly other corners. - * Something more with the right hand. not sure what. - * Mouse: Left scroll, right scroll - * Passwords and any other macros. - * LED for control - * All modifiers reset - * Russain layer - * Hebrew layer - * Get rid of stupid git pull and push macros. - * -*/ - -//Tap dance enums -enum { - F12ETAPS = 0, - CALCCOMP, - ALTF4, - F6F7, - TTT, - HOME_END, - CALC_PRINTSCREEN -}; - -static xtap ttt_state = { - .is_press_action = true, - .state = 0 -}; - - -//Already exists in gordon.c, shouldn't need this anymore -/*// To activate SINGLE_HOLD, you will need to hold for 200ms first. -// This tap dance favors keys that are used frequently in typing like 'f' -int cur_dance (qk_tap_dance_state_t *state) { - if (state->count == 1) { - if (state->interrupted) { - return SINGLE_TAP; - } - else { - if (!state->pressed) return SINGLE_TAP; - else return SINGLE_HOLD; - } - } - //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated - //with single tap. - else if (state->count == 2) { - if (state->interrupted) return DOUBLE_SINGLE_TAP; - else if (state->pressed) return DOUBLE_HOLD; - else return DOUBLE_TAP; - } - else if ((state->count == 3) && ((state->interrupted) || (!state->pressed))) return TRIPLE_TAP; - else if (state->count == 3) return TRIPLE_HOLD; - else return 8; //magic number. At some point this method will expand to work for more presses -}*/ - -/* "Super tap toggle" - * Basically, TT but for two or more layers for a single key. - * This particular dance: - * Single tap/hold - TT for Function layer - * Double tap/hold - TT for Numpad layer - * Triple tap/hold - TT for Mouse layer - * -*/ -void TTT_finished (qk_tap_dance_state_t *state, void *user_data) { - ttt_state.state = cur_dance(state); - switch (ttt_state.state) { - case SINGLE_TAP: layer_invert(_FUNCTION); break; - case SINGLE_HOLD: layer_on(_FUNCTION); break; - case DOUBLE_TAP: layer_invert(_NUMPAD); break; - case DOUBLE_HOLD: layer_on(_NUMPAD); break; - case DOUBLE_SINGLE_TAP: layer_invert(_NUMPAD); break; - case TRIPLE_TAP: layer_invert(_MOUSE); break; - case TRIPLE_HOLD: layer_on(_MOUSE); break; - } -} - -void TTT_reset (qk_tap_dance_state_t *state, void *user_data) { - switch (ttt_state.state) { - case SINGLE_TAP: break; - case SINGLE_HOLD: layer_off(_FUNCTION); break; - case DOUBLE_TAP: break; - case DOUBLE_HOLD: layer_off(_NUMPAD); break; - case DOUBLE_SINGLE_TAP: break; - case TRIPLE_TAP: break; - case TRIPLE_HOLD: layer_off(_MOUSE); break; - } - ttt_state.state = 0; -} - -qk_tap_dance_action_t tap_dance_actions[] = { - // simple tap dance - [F12ETAPS] = ACTION_TAP_DANCE_DOUBLE(KC_F12,LSFT(LCTL(KC_F10))), - [CALCCOMP] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_MY_COMPUTER), - [CALC_PRINTSCREEN] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_PSCR), - [ALTF4] = ACTION_TAP_DANCE_DOUBLE(KC_F4,LALT(KC_F4)), - [F6F7] = ACTION_TAP_DANCE_DOUBLE(LSFT(KC_F6), LALT(KC_F7)), - [HOME_END] = ACTION_TAP_DANCE_DOUBLE(KC_END, KC_HOME), - [TTT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,TTT_finished, TTT_reset), -}; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - MESC, Q ,CSHW,ENAV, R , T ,SPC , CLPS, Y , U ,INAV, O , P ,TTT, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - TAB , A , MEHS,DNUM,FCTL,GWIN,GRAVE, TILD, H ,JCTL, K ,MEHL,CLNMAUS,ENHM, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - MINUS,ZCTL,MEHX, C ,ALTV, B ,DELETE, INS ,ALTN, M ,COMM,DOT ,SLSH,UNDS, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - LSHIFT,BSPSYM, SPC ,ENTSYM - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_NUMPAD] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - , , , ,ASTR, , , , , 7 , 8 , 9 ,ASTR,/**/, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - ,MINS,PLUS,/**/,EQUAL, , , , , 4 , 5 , 6 ,PLUS, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , ,SLSH, , , , , 1 , 2 , 3 ,SLSH, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , 0 - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_SYMBOLS] = LAYOUT_kc( - //,----+----+-----+----+----+----+----. ,----+----+----+----+----+----+----. - ,EXLM, AT ,LCBR,RCBR,HASH, , ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/, - //|----+----+-----+----+----+----+----| |----+----+----+----+----+----+----| - ,EXLM,EXLM,LPRN,RPRN , , , , ,DQUO,EQUAL,QUOTE,RCBR, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - ,DOLLAR, PERC,LBRACKET,RBRACKET, , , ,PIPE,BSLASH,PLUS, , , , - //|----+----+-----+----+----+----+----| |----+----+----+----+----+----+----| - UNDS,/**/, ,/**/ - // \-------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_FUNCTION] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - F6F7 ,F1 ,F2 ,F3 ,ALF4,F5 ,F6 , F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,/**/, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_NAV] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - , ,SNAPLEFT,/**/,SNAPRIGHT,, , , , , UP , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - ,SNAPUP,PREVTAB, ,NEXTTAB,SNAPDOWN,, , ,LEFT,DOWN,RGHT, , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , ,WORKLEFT, ,WORKRIGHT,, , , ,PGUP,PGDN, , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - CDEL ,DEL, , - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_TEXTNAV] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - , , , , , , , , , ,/**/, , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - [_MOUSE] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - , , ,MS_UP, , , , , , , UP , , , ,/**/ - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , ,MS_LEFT,MS_DOWN,MS_RIGHT, , , , ,LEFT,DOWN,RGHT,/**/, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - ,MS_BTN1 ,MS_BTN2 , - // \------------------+----+----+---/ \---+----+----+-------------------/ - ), - - - [_MACROS] = LAYOUT_kc( - //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. - /**/,RESET,SECRET_2,SECRET_3, , , ,SYSTEM_SLEEP, , ,INCL, , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - CAD ,SECRET_1, , , , , , , , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - SCAP, , , , , , , , , , , , ,SCAP, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , - // \------------------+----+----+---/ \---+----+----+-------------------/ - ) - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - /* include some kind of library or header */ - case 0: - if (record->event.pressed) { - SEND_STRING("#include <>"); - return MACRO( T(LEFT), END); - } - break; - case 1: - if (record->event.pressed) { - SEND_STRING("git pull"); - return MACRO( T(ENT), END ); - } - break; - case 2: - if (record->event.pressed){ - SEND_STRING("git push"); - return MACRO( T(ENT), END ); - } - break; - case 3: - if (record->event.pressed){ - // layer_on(_CAPS); - // register_code(KC_CAPSLOCK); - // unregister_code(KC_CAPSLOCK); - } - break; - case 4: - if (record->event.pressed){ - // layer_off(_CAPS); - // register_code(KC_CAPSLOCK); - // unregister_code(KC_CAPSLOCK); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - switch (layer) { - case _QWERTY: - set_led_green; - break; - case _MOUSE: - set_led_yellow; - break; - case _NUMPAD: - set_led_blue; - break; - case _SYMBOLS: - set_led_red; - break; - case _NAV: - set_led_magenta; - break; - case _MACROS: - set_led_green; - _delay_ms(45); - set_led_red; - _delay_ms(45); - break; - case _FUNCTION: - set_led_green; - _delay_ms(45); - set_led_blue; - _delay_ms(45); - break; - default: - set_led_green; - break; - } -}; diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c deleted file mode 100644 index dc38ba74f86..00000000000 --- a/keyboards/chimera_ortho/matrix.c +++ /dev/null @@ -1,154 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include -#if defined(__AVR__) -#include -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - SERIAL_UART_INIT(); - - uint32_t timeout = 0; - - //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; - - //trust the external keystates entirely, erase the last data - uint8_t uart_data[11] = {0}; - - //there are 10 bytes corresponding to 10 columns, and an end byte - for (uint8_t i = 0; i < 11; i++) { - //wait for the serial data, timeout if it's been too long - //this only happened in testing with a loose wire, but does no - //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ - timeout++; - if (timeout > 10000){ - break; - } - } - uart_data[i] = SERIAL_UART_DATA; - } - - //check for the end packet, the key state bytes use the LSBs, so 0xE0 - //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { - //shifting and transferring the keystates to the QMK matrix variable - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; - } - } - - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3070 -#define MANUFACTURER Maple Computing -#define PRODUCT Christmas Tree -#define DESCRIPTION A tiny 6 key macro pad, in the shape of a christmas tree - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 1 - -/* Planck PCB default pin-out */ -#define MATRIX_ROW_PINS { D3, F4, D0, F6, F5, D4 } -#define MATRIX_COL_PINS { D1 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN D2 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#endif diff --git a/keyboards/christmas_tree/info.json b/keyboards/christmas_tree/info.json deleted file mode 100644 index 4153f0a6afc..00000000000 --- a/keyboards/christmas_tree/info.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "keyboard_name": "Christmas Tree", - "keyboard_folder": "christmas_tree", - "url": "https://www.reddit.com/r/MechanicalKeyboards/comments/7cqxpf/gb_christmas_tree_pcb_gb_now_live/", - "maintainer": "That-Canadian", - "width": 3, - "height": 3, - "layouts": { - "LAYOUT": { - "key_count": 6, - "layout": [{"x":1, "y":0}, {"x":0.5, "y":1}, {"x":1.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}] - } - } -} diff --git a/keyboards/christmas_tree/keymaps/default/config.h b/keyboards/christmas_tree/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/christmas_tree/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/christmas_tree/keymaps/default/keymap.c b/keyboards/christmas_tree/keymaps/default/keymap.c deleted file mode 100644 index 6621201996b..00000000000 --- a/keyboards/christmas_tree/keymaps/default/keymap.c +++ /dev/null @@ -1,83 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -enum layers { - _BASE, - _FUNC -}; - -enum custom_keycodes { - FUNC = SAFE_RANGE, - BACKLIT -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Base - * ,------. - * | 1 | - * ,------+------. - * | 2 | 3 | - * ,------+------+------. - * | 4 | FUNC | 6 | - * `--------------------' - */ - [_BASE] = LAYOUT( - KC_1, - KC_2, KC_3, - KC_4, MO(_FUNC), KC_6 - ), - - /* Func - * ,------. - * |BCKLIT| - * ,------+------. - * | 8 | 9 | - * ,------+------+------. - * | 0 | FUNC | RESET| - * `--------------------' - */ - [_FUNC] = LAYOUT( - BACKLIT, - KC_8, KC_9, - KC_0, _______, RESET - ) - - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - register_code(KC_LSFT); - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - unregister_code(KC_LSFT); - } - return false; - break; - } - return true; -} diff --git a/keyboards/christmas_tree/keymaps/default/readme.md b/keyboards/christmas_tree/keymaps/default/readme.md deleted file mode 100644 index a9cb4586efe..00000000000 --- a/keyboards/christmas_tree/keymaps/default/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The Default Christmas Tree Layout - diff --git a/keyboards/christmas_tree/keymaps/default/rules.mk b/keyboards/christmas_tree/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/christmas_tree/readme.md b/keyboards/christmas_tree/readme.md deleted file mode 100644 index b3337dd5ba6..00000000000 --- a/keyboards/christmas_tree/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -Christmas Tree -=== - -![Christmas Tree](https://i.imgur.com/I9FNdSv.png) - -A tiny 6 key macro pad, in the shape of a christmas tree, made by That-Canadian, SpaceCat, and ChillCaps. - -Keyboard Maintainer: [That-Canadian](https://github.com/That-Canadian) - -Make example for this keyboard (after setting up your build environment): - - make christmas_tree/V2017:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file diff --git a/keyboards/christmas_tree/rules.mk b/keyboards/christmas_tree/rules.mk deleted file mode 100644 index 741747ecac5..00000000000 --- a/keyboards/christmas_tree/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -DEFAULT_FOLDER = christmas_tree/V2017 diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h deleted file mode 100755 index 3dc99319ed0..00000000000 --- a/keyboards/ckeys/handwire_101/config.h +++ /dev/null @@ -1,191 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ckeys_handwire -#define PRODUCT ckeys_handwire -#define DESCRIPTION 4x4 handwire workshop board - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F5, F6, F7 } -#define MATRIX_COL_PINS { D4, C6, D7, E6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -//#define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -// Audio Click -#define AUDIO_CLICKY - -// Music Mode Polyphony -// NOTE: Must change polyphony_rate to a number higher than 0 in voices.c -#define AUDIO_VOICES -#define PITCH_STANDARD_A 880.0f - -// Mouse keys -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 2 -#define MOUSEKEY_TIME_TO_MAX 5 -#define MOUSEKEY_WHEEL_DELAY 0 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/ckeys/handwire_101/handwire_101.c b/keyboards/ckeys/handwire_101/handwire_101.c deleted file mode 100755 index a6ff8f0e3d0..00000000000 --- a/keyboards/ckeys/handwire_101/handwire_101.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "handwire_101.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - // Turn status LED on - //DDRD |= (1<<6); - //PORTD |= (1<<6); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} diff --git a/keyboards/ckeys/handwire_101/handwire_101.h b/keyboards/ckeys/handwire_101/handwire_101.h deleted file mode 100755 index 0f0309c3245..00000000000 --- a/keyboards/ckeys/handwire_101/handwire_101.h +++ /dev/null @@ -1,21 +0,0 @@ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33 \ -) \ -{ \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, k33 } \ -} - diff --git a/keyboards/ckeys/handwire_101/info.json b/keyboards/ckeys/handwire_101/info.json deleted file mode 100644 index dfe6c483046..00000000000 --- a/keyboards/ckeys/handwire_101/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "cKeys Handwire 101", - "url": "https://ckeys.org/slides/handwire/", - "maintainer": "brandenbyers", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - } - } -} diff --git a/keyboards/ckeys/handwire_101/keymaps/default/config.h b/keyboards/ckeys/handwire_101/keymaps/default/config.h deleted file mode 100755 index 9935accb02d..00000000000 --- a/keyboards/ckeys/handwire_101/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// Add overrides here diff --git a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c b/keyboards/ckeys/handwire_101/keymaps/default/keymap.c deleted file mode 100755 index 383b3355dec..00000000000 --- a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c +++ /dev/null @@ -1,178 +0,0 @@ -#include QMK_KEYBOARD_H - -enum layers { - _BASE, // base layer - _LAYERS, // layer of all layers - _MUSIC, // music mode - _MUSIC_4_LIFE, // music mode until unplugged - _MOUSE, // mousekeys - _TERMINAL, // terminal - _ADMIN // admin duties -}; - -enum custom_keycodes { - TERM_ABOUT = SAFE_RANGE, - TERM_PRINT, - TERM_FLUSH, - TERM_HELP, - CKEYS_ABOUT, -}; - -extern keymap_config_t keymap_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* BASE (numpad) - * ,-----------------------. - * | 7 | 8 | 9 | / | <-- Hold for LAYERS - * |-----+-----+-----+-----| - * | 4 | 5 | 6 | * | - * |-----+-----+-----+-----| - * | 1 | 2 | 3 | - | - * |-----+-----+-----+-----| - * | 0 | . | = | + | - * `---------------------- ' - */ - [_BASE] = LAYOUT( - KC_KP_7, KC_KP_8, KC_KP_9, LT(MO(_LAYERS), KC_PSLS), \ - KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, \ - KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS \ - ), - /* LAYERS - * ,---------------------------. - * | MUSIC | | | X | - * |---------+-----+-----+-----| - * | MOUSE | | | | - * |---------+-----+-----+-----| - * |TERMINAL | | | | - * |---------+-----+-----+-----| - * | ADMIN | | | | - * `---------------------------' - */ - [_LAYERS] = LAYOUT( - TG(_MUSIC), _______, _______, _______, \ - TG(_MOUSE), _______, _______, _______, \ - TG(_TERMINAL), _______, _______, _______, \ - TG(_ADMIN), _______, _______, _______\ - ), - /* MUSIC - * ,-----------------------. - * | X | | | X | - * |-----+-----+-----+-----| - * | | | |4EVER| - * |-----+-----+-----+-----| - * | OFF | | | | - * |-----+-----+-----+-----| - * | ON | | |MODES| - * `---------------------- ' - */ - // TODO: Make this music layer the one to jump to other music layers (different octaves) - [_MUSIC] = LAYOUT( - _______, _______, _______, _______, \ - _______, _______, _______, TG(_MUSIC_4_LIFE), \ - MU_OFF, _______, _______, _______, \ - MU_ON, _______, _______, MU_MOD \ - ), - /* MUSIC_4_LIFE - * ,-----------------------. - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * `---------------------- ' - */ - [_MUSIC_4_LIFE] = LAYOUT( - KC_M, KC_M, KC_M, KC_M, \ - KC_M, KC_M, KC_M, KC_M, \ - KC_M, KC_M, KC_M, KC_M, \ - KC_M, KC_M, KC_M, KC_M \ - ), - /* MOUSE - * ,-------------------------------------------------. - * | BUTTON 5 | | SCROLL UP | X | - * |-----------+-----------+------------+------------| - * | X |LEFT CLICK | UP |RIGHT CLICK | - * |-----------+-----------+------------+------------| - * | BUTTON 4 | LEFT | DOWN | RIGHT | - * |-----------+-----------+------------+------=-----| - * | BUTTON 3 |SCROLL LEFT|SCROLL DOWN |SCROLL RIGHT| - * `-------------------------------------------------' - */ - [_MOUSE] = LAYOUT( - KC_MS_BTN5, _______, KC_MS_WH_UP, _______, \ - _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, \ - KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, \ - KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT \ - ), - /* TERMINAL - * ,---------------------------------------. - * | |ABOUT| | X | - * |------------+-----+----------+---------| - * |TERMINAL OFF|PRINT| | | - * |------------+-----+----------+---------| - * | X |FLUSH| | | - * |------------+-----+----------+---------| - * |TERMINAL ON |HELP | | | - * `--------=======------------------------' - */ - [_TERMINAL] = LAYOUT( - _______, TERM_ABOUT, _______, _______, \ - TERM_OFF, TERM_PRINT, _______, _______, \ - _______, TERM_FLUSH, _______, _______, \ - TERM_ON, TERM_HELP , _______, _______\ - ), - /* ADMIN - * ,-----------------------------------------. - * | RESET | | | X | - * |------------+-----+-----------+----------| - * |ABOUT CKEYS | | | | - * |------------+-----+-----------+----------| - * | | |CLICKY UP |CLICKY OFF| - * |------------+-----+-----------+----------| - * | X | |CLICKY DOWN|CLICKY ON | - * `-----------------------------------------' - */ - [_ADMIN] = LAYOUT( - RESET, _______, _______, _______, \ - CKEYS_ABOUT, _______, _______, _______, \ - _______, _______, _______, CK_OFF, \ - _______, _______, _______, CK_ON \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case TERM_ABOUT: - if (record->event.pressed) { - // when keycode TERM_ABOUT is pressed - SEND_STRING("about"SS_TAP(X_ENTER)); - } else { - // when keycode TERM_ABOUT is released - } - break; - case TERM_PRINT: - if (record->event.pressed) { - SEND_STRING("print"SS_TAP(X_ENTER)); - } else { } - break; - case TERM_FLUSH: - if (record->event.pressed) { - SEND_STRING("flush"SS_TAP(X_ENTER)); - } else { } - break; - case TERM_HELP: - if (record->event.pressed) { - SEND_STRING("help"SS_TAP(X_ENTER)); - } else { } - break; - case CKEYS_ABOUT: - if (record->event.pressed) { - SEND_STRING("https://cKeys.org"SS_TAP(X_ENTER)"Making people smile one keyboard at a time."SS_TAP(X_ENTER)"cKeys is a volunteer-run 501(c)(3) nonprofit organization."SS_TAP(X_ENTER)); - } else { } - break; - } - return true; -}; diff --git a/keyboards/ckeys/handwire_101/keymaps/default/readme.md b/keyboards/ckeys/handwire_101/keymaps/default/readme.md deleted file mode 100755 index 4594bdfe317..00000000000 --- a/keyboards/ckeys/handwire_101/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for the cKeys Handwire 101 4x4 keyboard. \ No newline at end of file diff --git a/keyboards/ckeys/handwire_101/readme.md b/keyboards/ckeys/handwire_101/readme.md deleted file mode 100755 index cf20dab60b7..00000000000 --- a/keyboards/ckeys/handwire_101/readme.md +++ /dev/null @@ -1,163 +0,0 @@ -# cKeys Handwire 101 Workshop - -![](https://ckeys.org/images/proton-c-handwire-1.jpg) - -## Slides - -Slides can be found at: https://ckeys.org/slides/handwire/ - -## Case Design - -The laser cutting file is ideal for Ponoko's P1 board size. - -## Firmware - -If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C and the `.hex` file for Pro Micro builds. Flash with the QMK Toolbox or via the command line. - -Building for Proton C: `make ckeys/handwire_101:default CTPC=yes` -Building for Pro Micro: `make ckeys/handwire_101:default` - -Pre-built firmware files (and laser cutting case files) can be found here: https://github.com/c-keys/handwire - -## Default Layout - -You can find the default layout in `qmk-handwire/keymaps/default/keymap.c` - -### Layers - -When you plug in your keyboard, it will function as a numpad. You will remain in the `Base` numpad layer unless you hold down the top right corner key and select one of the keys in the left most column. In QMK, this is called a momentary switch and looks like `MO(LAYERS)` in the default `keymap.c`. You can read more about layer switching in the [QMK Documentation](https://beta.docs.qmk.fm/features/feature_advanced_keycodes#switching-and-toggling-layers). - -#### Base -``` - /* BASE (numpad) - * ,-----------------------. - * | 7 | 8 | 9 | / | <-- Hold for LAYERS - * |-----+-----+-----+-----| - * | 4 | 5 | 6 | * | - * |-----+-----+-----+-----| - * | 1 | 2 | 3 | - | - * |-----+-----+-----+-----| - * | 0 | . | = | + | - * `---------------------- ' - */ -``` - -#### Layers - -``` - /* LAYERS - * ,---------------------------. - * | MUSIC | | | X | - * |---------+-----+-----+-----| - * | MOUSE | | | | - * |---------+-----+-----+-----| - * |TERMINAL | | | | - * |---------+-----+-----+-----| - * | ADMIN | | | | - * `---------------------------' - */ -``` - -This is the layers layer. This is how you toggle other layers on and off. If you toggle on a layer, it is important that you re-toggle that layer offbefore switching to a new layer. - -#### Music - -``` - /* MUSIC - * ,-----------------------. - * | X | | | X | - * |-----+-----+-----+-----| - * | | | |4EVER| - * |-----+-----+-----+-----| - * | OFF | | | | - * |-----+-----+-----+-----| - * | ON | | |MODES| - * `---------------------- ' - */ -``` - -You can toggle the music mode on and off. You can also change the mode of music modes. Lastly, you can switch to the Music 4 Life mode but tapping the key marked `4EVER` above (see below). For more information on music mode, see the [QMK Documentation](https://beta.docs.qmk.fm/features/feature_audio). - -_NOTE: This layer will only make sounds if you install a speaker. At the time of this writing, you can get the Proton C specific piezo speaker for [$2.61 with free overnight shipping](https://www.arrow.com/en/products/ast1109mltrq/mallory-sonalert-products). You can solder it on by desoldering the row wires where they contact the cathode end of the diodes. Then flip over the Proton C and solder the piezo speaker in. Then re-solder the row wires and you should hear beeps and boops the next time you plug in your keyboard._ - -#### Music 4 Life - -``` - /* MUSIC_4_LIFE - * ,-----------------------. - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * |-----+-----+-----+-----| - * | ♫ | ♫ | ♫ | ♫ | - * `---------------------- ' - */ -``` - -Music mode on every single key. However, you will need to unplug your keyboard in order to get out of this mode. The benefit of this is that you can use every single key as opposed to the few left over in the Music Mode layer. Try changing the chromatic mode before switching to this mode. - -#### Mouse - -``` - /* MOUSE - * ,-------------------------------------------------. - * | BUTTON 5 | | SCROLL UP | X | - * |-----------+-----------+------------+------------| - * | X |LEFT CLICK | UP |RIGHT CLICK | - * |-----------+-----------+------------+------------| - * | BUTTON 4 | LEFT | DOWN | RIGHT | - * |-----------+-----------+------------+------=-----| - * | BUTTON 3 |SCROLL LEFT|SCROLL DOWN |SCROLL RIGHT| - * `-------------------------------------------------' - */ -``` - -Switch to this mode, force yourself through the steep transitionary period, and then you can ditch mice and trackpads forever! - -#### Terminal - -``` - /* TERMINAL - * ,---------------------------------------. - * | |ABOUT| | X | - * |------------+-----+----------+---------| - * |TERMINAL OFF|PRINT| | | - * |------------+-----+----------+---------| - * | X |FLUSH| | | - * |------------+-----+----------+---------| - * |TERMINAL ON |HELP | | | - * `--------=======------------------------' - */ -``` - -This layer is not currently working but has been left as an example of how to write macros. - -#### Admin - -``` - /* ADMIN - * ,-----------------------------------------. - * | RESET | | | X | - * |------------+-----+-----------+----------| - * |ABOUT CKEYS | | | | - * |------------+-----+-----------+----------| - * | | |CLICKY UP |CLICKY OFF| - * |------------+-----+-----------+----------| - * | X | |CLICKY DOWN|CLICKY ON | - * `-----------------------------------------' - */ -``` - -The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards. - -The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys. - -The clicky buttons will only make a difference if you install a piezo speaker. If you install a speaker, then you can make your keyboard extra clicky sounding even if you did not install clicky switches. - -![](https://ckeys.org/images/proton-c-handwire-2.jpg) -![](https://ckeys.org/images/proton-c-handwire-3.jpg) -![](https://ckeys.org/images/handwire-1.jpg) -![](https://ckeys.org/images/handwire-2.jpg) -![](https://ckeys.org/images/handwire-3.jpg) diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk deleted file mode 100755 index 957a6c8fba6..00000000000 --- a/keyboards/ckeys/handwire_101/rules.mk +++ /dev/null @@ -1,69 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -BOOTLOADER = caterina - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -TERMINAL_ENABLE = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -#MIDI_ENABLE = yes # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h deleted file mode 100644 index add3a352213..00000000000 --- a/keyboards/ckeys/nakey/config.h +++ /dev/null @@ -1,184 +0,0 @@ -/* -Copyright 2018 James Underwood - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER cKeys -#define PRODUCT naKey -#define DESCRIPTION The cKeys through hole ten key pad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3 } -#define UNUSED_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, B4, B5, B6, B7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/ckeys/nakey/info.json b/keyboards/ckeys/nakey/info.json deleted file mode 100644 index 093e61d0e05..00000000000 --- a/keyboards/ckeys/nakey/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "naKey", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 5, - "layouts": { - "LAYOUT_numpad_5x4": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}] - } - } -} diff --git a/keyboards/ckeys/nakey/keymaps/default/keymap.c b/keyboards/ckeys/nakey/keymaps/default/keymap.c deleted file mode 100644 index ee14c1716e5..00000000000 --- a/keyboards/ckeys/nakey/keymaps/default/keymap.c +++ /dev/null @@ -1,57 +0,0 @@ -/* Copyright 2018 James Underwood - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_numpad_5x4( /* Base */ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, KC_PDOT, KC_PENT \ - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/ckeys/nakey/keymaps/default/readme.md b/keyboards/ckeys/nakey/keymaps/default/readme.md deleted file mode 100644 index c842dc99a76..00000000000 --- a/keyboards/ckeys/nakey/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for naKey diff --git a/keyboards/ckeys/nakey/nakey.c b/keyboards/ckeys/nakey/nakey.c deleted file mode 100644 index ba2fb90ebe4..00000000000 --- a/keyboards/ckeys/nakey/nakey.c +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2018 James Underwood - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "nakey.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/ckeys/nakey/nakey.h b/keyboards/ckeys/nakey/nakey.h deleted file mode 100644 index bbf531fb680..00000000000 --- a/keyboards/ckeys/nakey/nakey.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2018 James Underwood - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef NAKEY_H -#define NAKEY_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_numpad_5x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, \ - k20, k21, k22, k13, \ - k30, k31, k32, \ - k40, k41, k33 \ -) { \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, KC_NO }, \ - { k30, k31, k32, k33 }, \ - { k40, KC_NO, k41, KC_NO }, \ -} - -#endif diff --git a/keyboards/ckeys/nakey/readme.md b/keyboards/ckeys/nakey/readme.md deleted file mode 100644 index b85e822abdf..00000000000 --- a/keyboards/ckeys/nakey/readme.md +++ /dev/null @@ -1,49 +0,0 @@ -# naKey - -Firmware for custom keyboard - -Keyboard Maintainer: [James Underwood](https://github.com/ju0) -Hardware Supported: naKey -Hardware Availability: [ckeys.org](https://ckeys.org) - -To build this keyboard, follow the [build guide](https://ckeys.org/tutorials/nakey-numpad-build-guide/). - -Make example for this keyboard (after setting up your build environment): - - make ckeys/nakey:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the root folder. Once your dev env is setup, you'll be able to type `make ckeys/nakey:default` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -(Note: replace naKey with the name of your keyboard.) - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make ckeys/nakey:default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder. Create a `readme.md` and a `keymap.c` file to complete your new keymap. When you are done your file tree should look like this: - -* `qmk_firmware/` - * `keyboard/` - * `keymaps/` - * `config.h` (optional) - * `keymap.c` - * `readme.md` - * `rules.mk` (optional) - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make naKey-[default|jack|] -``` diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk deleted file mode 100644 index 36b2193aae8..00000000000 --- a/keyboards/ckeys/nakey/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches - -LAYOUTS = numpad_5x4 diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h deleted file mode 100644 index 4d7afc4f52e..00000000000 --- a/keyboards/ckeys/obelus/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT obelus -#define DESCRIPTION 4x4 QMK test platform - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F5, F6, F7 } -#define MATRIX_COL_PINS { F0, F1, B2, B3 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#ifdef AUDIO_ENABLE - #define AUDIO_VOICES - #define C6_AUDIO - #define STARTUP_SONG SONG(STARTUP_SOUND) -#endif - -#endif diff --git a/keyboards/ckeys/obelus/info.json b/keyboards/ckeys/obelus/info.json deleted file mode 100644 index 70d2f7e7e57..00000000000 --- a/keyboards/ckeys/obelus/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Obelus", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - } - } -} diff --git a/keyboards/ckeys/obelus/keymaps/default/config.h b/keyboards/ckeys/obelus/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/ckeys/obelus/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/ckeys/obelus/keymaps/default/keymap.c b/keyboards/ckeys/obelus/keymaps/default/keymap.c deleted file mode 100644 index f71ac562766..00000000000 --- a/keyboards/ckeys/obelus/keymaps/default/keymap.c +++ /dev/null @@ -1,112 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* LAYERS - * ,-----------------------. - * | | | |RESET| - * |-----+-----+-----+-----| - * |MUSIC| | | | - * |-----+-----+-----+-----| - * |NUMPD| NAV |GAMES| | - * |-----+-----+-----+-----| - * | | | | | - * `---------------------- ' - */ - [0] = LAYOUT_ortho_4x4( /* LAYER SELECT */ - _______, _______, _______, RESET, \ - TO(4), _______, _______, _______, \ - TO(1), TO(2), TO(3), _______, \ - _______, _______, _______, _______ \ - ), - /* NUMPAD - * ,-----------------------. - * | 7 | 8 | 9 | * | - * |-----+-----+-----+-----| - * | 4 | 5 | 6 | - | - * |-----+-----+-----+-----| - * | 1 | 2 | 3 | + | - * |-----+-----+-----+-----| - * | 0 | . | / | = | - * `---------------------- ' - */ - [1] = LAYOUT_ortho_4x4( /* NUMPAD */ - KC_P7, KC_P8, KC_P9, KC_PAST, \ - KC_P4, KC_P5, KC_P6, KC_PMNS, \ - KC_P1, KC_P2, KC_P3, KC_PPLS, \ - KC_P0, KC_PDOT, KC_PSLS, LT(5, KC_PENT) \ - ), - /* NUMPAD SUPPLEMENT - * ,-----------------------. - * |NUMLK| | | | - * |-----+-----+-----+-----| - * | | | | | - * |-----+-----+-----+-----| - * | | | | | - * |-----+-----+-----+-----| - * | | | | | - * `---------------------- ' - */ - [5] = LAYOUT_ortho_4x4( /* NUMPAD SUPPLEMENT */ - KC_NLCK, _______, _______, TO(0), \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______ \ - ), - /* NAV - * ,-----------------------. - * | INS |PGUP | TAB |PRSCR| - * |-----+-----+-----+-----| - * | DEL |PGDN |VOLD |VOLU | - * |-----+-----+-----+-----| - * |HOME | UP | END | | - * |-----+-----+-----+-----| - * |LEFT |DOWN |RIGHT|ENTER| - * `---------------------- ' - */ - [2] = LAYOUT_ortho_4x4( /* NAV CLUSTER */ - KC_INS, KC_PGUP, KC_TAB, KC_PSCR, \ - KC_DEL, KC_PGDN, KC_VOLD, KC_VOLU, \ - KC_HOME, KC_UP, KC_END, TO(0), \ - KC_LEFT, KC_DOWN, KC_RGHT, KC_ENT \ - ), - /* GAMING - * ,-----------------------. - * | ESC | 1 | 2 | 3 | - * |-----+-----+-----+-----| - * | TAB | Q | W | E | - * |-----+-----+-----+-----| - * |SHIFT| A | S | D | - * |-----+-----+-----+-----| - * |CTRL | C | R |SPACE| - * `---------------------- ' - */ - [3] = LAYOUT_ortho_4x4( /* GAMING */ - LT(4, KC_ESC), KC_1, KC_2, KC_3, \ - KC_TAB, KC_Q, KC_W, KC_E, \ - KC_LSFT, KC_A, KC_S, KC_D, \ - KC_LCTL, KC_C, KC_R, KC_SPC \ - ), - /* MUSIC - * ,-----------------------. - * | | | | | - * |-----+-----+-----+-----| - * | | | | | - * |-----+-----+-----+-----| - * | | | | | - * |-----+-----+-----+-----| - * |TOGGL|MODE | | | - * `---------------------- ' - */ - [4] = LAYOUT_ortho_4x4( /* NUMPAD SUPPLEMENT */ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - MU_TOG, MU_MOD, XXXXXXX, TO(0) \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} diff --git a/keyboards/ckeys/obelus/keymaps/default/readme.md b/keyboards/ckeys/obelus/keymaps/default/readme.md deleted file mode 100644 index bac51fc043c..00000000000 --- a/keyboards/ckeys/obelus/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for obelus \ No newline at end of file diff --git a/keyboards/ckeys/obelus/obelus.c b/keyboards/ckeys/obelus/obelus.c deleted file mode 100644 index 2905f0724df..00000000000 --- a/keyboards/ckeys/obelus/obelus.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "obelus.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - // Turn status LED on - DDRD |= (1<<6); - PORTD |= (1<<6); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} diff --git a/keyboards/ckeys/obelus/obelus.h b/keyboards/ckeys/obelus/obelus.h deleted file mode 100644 index 371b79df201..00000000000 --- a/keyboards/ckeys/obelus/obelus.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef OBELUS_H -#define OBELUS_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT_ortho_4x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33 \ -) \ -{ \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, k33 } \ -} - -#endif diff --git a/keyboards/ckeys/obelus/readme.md b/keyboards/ckeys/obelus/readme.md deleted file mode 100644 index 640e0f55e41..00000000000 --- a/keyboards/ckeys/obelus/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -Obelus -=== - -[The Obelus](https://imgur.com/a/vj4LF) is designed to provide an easy platform to work with for people who are new to building keyboards. It is also especially useful as a QMK testbed, featuring support for a lot of the interesting features of QMK including audio, and a lot of spare pins broken out to headers for hacking away. - -Keyboard Maintaintainers: [Ethan Madden](https://github.com/jetpacktuxedo), [James Underwood](https://github.com/ju0) -Hardware Supported: Obelus -Hardware Availability: [C-Keys soldering workshops](https://ckeys.org/workshops/), [/u/MonkeyPlusPlus](https://www.reddit.com/user/monkeyplusplus) - -Make example for this keyboard (after setting up your build environment): - - make ckeys/obelus:default - -Or to make and flash: - - make ckeys/obelus:default:dfu - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk deleted file mode 100644 index f40610ee952..00000000000 --- a/keyboards/ckeys/obelus/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = yes # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -LAYOUTS = ortho_4x4 diff --git a/keyboards/ckeys/readme.md b/keyboards/ckeys/readme.md deleted file mode 100644 index bdcf5b34d84..00000000000 --- a/keyboards/ckeys/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -# cKeys.org - -[cKeys](https://ckeys.org/) is a mechanical keyboard-based nonprofit organization located in Seattle, Washington. - -In addition, to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), they have [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository. - -* Supported Hardware - * The Obelus - 4x4 Macropad - * naKey - Through hole numpad - * Handwire 101 - Handwired 4x4 (Proton C or Pro Micro) diff --git a/keyboards/claw44/claw44.c b/keyboards/claw44/claw44.c deleted file mode 100644 index f564fb623b8..00000000000 --- a/keyboards/claw44/claw44.c +++ /dev/null @@ -1,10 +0,0 @@ -#include "claw44.h" -#include "ssd1306.h" - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { -#ifdef SSD1306OLED - return process_record_gfx(keycode,record) && process_record_user(keycode, record); -#else - return process_record_user(keycode, record); -#endif -} diff --git a/keyboards/claw44/claw44.h b/keyboards/claw44/claw44.h deleted file mode 100644 index 4ca25fcb2b1..00000000000 --- a/keyboards/claw44/claw44.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#ifdef KEYBOARD_claw44_rev1 - #include "rev1.h" -#endif diff --git a/keyboards/claw44/config.h b/keyboards/claw44/config.h deleted file mode 100644 index fb1cdf3962a..00000000000 --- a/keyboards/claw44/config.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" -#include - -#define USE_I2C -#define USE_SERIAL - -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION diff --git a/keyboards/claw44/i2c.c b/keyboards/claw44/i2c.c deleted file mode 100644 index 4bee5c63982..00000000000 --- a/keyboards/claw44/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/claw44/keymaps/default/config.h deleted file mode 100644 index eff6ad3c7ba..00000000000 --- a/keyboards/claw44/keymaps/default/config.h +++ /dev/null @@ -1,35 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -//#define USE_MATRIX_I2C - -/* Select hand configuration */ - -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define SSD1306OLED - -#define USE_SERIAL_PD2 - -#define TAPPING_TERM 200 diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/claw44/keymaps/default/keymap.c deleted file mode 100644 index c346571255f..00000000000 --- a/keyboards/claw44/keymaps/default/keymap.c +++ /dev/null @@ -1,169 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -#define KC_ KC_TRNS -#define KC_RST RESET -#define KC_L_SPC LT(_LOWER, KC_SPC) // lower -#define KC_R_ENT LT(_RAISE, KC_ENT) // raise -#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win -#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win -#define KC_C_BS LCTL_T(KC_BSPC) // ctrl -#define KC_A_DEL ALT_T(KC_DEL) // alt - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT( \ - //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------. - KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, - //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| - KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, - //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| - KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, - //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------' - KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL - // `----------+--------+---------+--------' `--------+---------+--------+---------' - ), - - // \ ^ ! & | @ = + * % - - // ( # $ " ' ~ ← ↓ ↑ → ` ) - // { [ ] } - - [_RAISE] = LAYOUT( \ - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, - //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' - _______, _______, _______, _______, _______, _______, _______, RESET - // `--------+--------+--------+--------' `--------+--------+--------+--------' - ), - - [_LOWER] = LAYOUT( \ - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, - //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' - RESET , _______, _______, _______, _______, _______, _______, _______ - // `--------+--------+--------+--------' `--------+--------+--------+--------' - ), -}; - -void matrix_init_user(void) { - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - } - return true; -} diff --git a/keyboards/claw44/keymaps/yfuku/config.h b/keyboards/claw44/keymaps/yfuku/config.h deleted file mode 100644 index 244ffa7096d..00000000000 --- a/keyboards/claw44/keymaps/yfuku/config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -//#define USE_MATRIX_I2C - -/* Select hand configuration */ - -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -#define SSD1306OLED - -#define USE_SERIAL_PD2 - -#define TAPPING_TERM 180 -#define IGNORE_MOD_TAP_INTERRUPT diff --git a/keyboards/claw44/keymaps/yfuku/keymap.c b/keyboards/claw44/keymaps/yfuku/keymap.c deleted file mode 100644 index 77d459b928d..00000000000 --- a/keyboards/claw44/keymaps/yfuku/keymap.c +++ /dev/null @@ -1,221 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -// common -#define KC_ KC_TRNS -#define KC_XXXX KC_NO -#define KC_RST RESET -#define KC_VD KC__VOLDOWN -#define KC_VU KC__VOLUP - -// layer -#define KC_L_SPC LT(_LOWER, KC_SPC) -#define KC_R_ENT LT(_RAISE, KC_ENT) - -// shift_t -#define KC_S_TAB LSFT_T(KC_TAB) -#define KC_S_ESC LSFT_T(KC_ESC) -#define KC_S_JA LSFT_T(KC_LANG1) -#define KC_S_EN LSFT_T(KC_LANG2) - -// cmd_t -#define KC_M_F LCMD_T(KC_F) -#define KC_M_D LCMD_T(KC_D) -#define KC_M_J LCMD_T(KC_J) -#define KC_M_K LCMD_T(KC_K) - -// ctl_t -#define KC_C_S LCTL_T(KC_S) -#define KC_C_L LCTL_T(KC_L) -#define KC_C_BS LCTL_T(KC_BSPC) - -// alt_t -#define KC_A_D ALT_T(KC_D) -#define KC_A_K ALT_T(KC_K) -#define KC_A_Z ALT_T(KC_Z) -#define KC_A_SL ALT_T(KC_SLSH) -#define KC_A_DEL ALT_T(KC_DEL) - -// cmd+shift_t -#define KC_MS_Q SCMD_T(KC_Q) -#define KC_MS_A SCMD_T(KC_A) -#define KC_MS_S SCMD_T(KC_S) -#define KC_MS_SC SCMD_T(KC_SCLN) -#define KC_MS_ESC SCMD_T(KC_ESC) - -// -#define KC_MR RCMD(KC_R) -#define KC_MF RCMD(KC_F) -#define KC_MW RCMD(KC_W) -#define KC_MX RCMD(KC_X) -#define KC_MC RCMD(KC_C) -#define KC_MV RCMD(KC_V) -#define KC_MTAB RCMD(KC_TAB) -#define KC_MSF RCMD(RSFT(KC_F)) -#define KC_MSR RCMD(RSFT(KC_R)) -#define KC_MST RCMD(RSFT(KC_T)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // M_ = LCMD_T( - // A_ = ALT_T( - // C_ = LCTL_T( - // MS_ = SMD_T( - // R_ = LT(_RAISE - // L_ = LT(_LOWER - - [_QWERTY] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - ESC , Q , W , E , R , T , Y , U , I , O , P ,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - S_TAB, A ,C_S , D ,M_F , G , H ,M_J , K ,C_L ,SCLN,S_ESC, - //|----+----+----+----+----+----+ |----+----+----+----+----+----| - , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, , - //`----+----+----+----+----+----/ \----+----+----+----+----+----' - A_DEL,S_EN,L_SPC,C_BS, C_BS,R_ENT,S_JA,A_DEL - // `----+----+----+----' `----+----+----+----' - ), - - // \ ^ ! & | @ = + * % - - // ( # $ " ' ~ ← ↓ ↑ → ` ) - // { [ ] } - - [_RAISE] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - ,BSLS,CIRC,EXLM,AMPR,PIPE, AT ,EQL ,PLUS,ASTR,PERC,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - LPRN,HASH,DLR ,DQT ,QUOT,TILD, LEFT,DOWN, UP ,RGHT,GRV ,RPRN, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , , , ,LCBR,LBRC, RBRC,RCBR, , , , , - //`----+----+----+----+----+----/ \----+----+----+----+----+----' - , ,BSPC, , , , ,RST - // `----+----+----+----' `----+----+----+----' - ), - - [_LOWER] = LAYOUT_kc( \ - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - , , ,MSF ,MSR ,MST , ,EQL ,PLUS,ASTR,PERC,MINS, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , - //|----+----+----+----+----+----| |----+----+----+----+----+----| - , , , , , , , ,COMM,DOT ,SLSH, , - //`----+----+----+--+-+----+----/ \----+----+----+----+----+----' - RST , , , , ,DEL , , - // `----+----+----+----' `----+----+----+----' - ), -}; - -void matrix_init_user(void) { - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); - -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); - -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - matrix_write_ln(matrix, read_keylogs()); - //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - //matrix_write_ln(matrix, read_host_led_state()); - //matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); - } -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { -#ifdef SSD1306OLED - set_keylog(keycode, record); -#endif - // set_timelog(); - } - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - } - return true; -} - diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/claw44/lib/glcdfont.c deleted file mode 100644 index 91f53d9c24e..00000000000 --- a/keyboards/claw44/lib/glcdfont.c +++ /dev/null @@ -1,243 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H - -#ifdef __AVR__ - #include - #include -#elif defined(ESP8266) - #include -#else - #define PROGMEM -#endif - -// Standard ASCII 5x7 font -const unsigned char font[] PROGMEM = { -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, -0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, -0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, -0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, -0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, -0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, -0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, -0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, -0x00, 0x18, 0x24, 0x18, 0x00, 0x00, -0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, -0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, -0x26, 0x29, 0x79, 0x29, 0x26, 0x00, -0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, -0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, -0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, -0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, -0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, -0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, -0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, -0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, -0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, -0x60, 0x60, 0x60, 0x60, 0x60, 0x00, -0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, -0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, -0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, -0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, -0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, -0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, -0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, -0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, -0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, -0x00, 0x07, 0x00, 0x07, 0x00, 0x00, -0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, -0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, -0x23, 0x13, 0x08, 0x64, 0x62, 0x00, -0x36, 0x49, 0x56, 0x20, 0x50, 0x00, -0x00, 0x08, 0x07, 0x03, 0x00, 0x00, -0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, -0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, -0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, -0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, -0x00, 0x80, 0x70, 0x30, 0x00, 0x00, -0x08, 0x08, 0x08, 0x08, 0x08, 0x00, -0x00, 0x00, 0x60, 0x60, 0x00, 0x00, -0x20, 0x10, 0x08, 0x04, 0x02, 0x00, -0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, -0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, -0x72, 0x49, 0x49, 0x49, 0x46, 0x00, -0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, -0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, -0x27, 0x45, 0x45, 0x45, 0x39, 0x00, -0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, -0x41, 0x21, 0x11, 0x09, 0x07, 0x00, -0x36, 0x49, 0x49, 0x49, 0x36, 0x00, -0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, -0x00, 0x00, 0x14, 0x00, 0x00, 0x00, -0x00, 0x40, 0x34, 0x00, 0x00, 0x00, -0x00, 0x08, 0x14, 0x22, 0x41, 0x00, -0x14, 0x14, 0x14, 0x14, 0x14, 0x00, -0x00, 0x41, 0x22, 0x14, 0x08, 0x00, -0x02, 0x01, 0x59, 0x09, 0x06, 0x00, -0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, -0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, -0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, -0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, -0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, -0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, -0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, -0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, -0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, -0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, -0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, -0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, -0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, -0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, -0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, -0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, -0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, -0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, -0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, -0x26, 0x49, 0x49, 0x49, 0x32, 0x00, -0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, -0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, -0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, -0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, -0x63, 0x14, 0x08, 0x14, 0x63, 0x00, -0x03, 0x04, 0x78, 0x04, 0x03, 0x00, -0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, -0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, -0x02, 0x04, 0x08, 0x10, 0x20, 0x00, -0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, -0x04, 0x02, 0x01, 0x02, 0x04, 0x00, -0x40, 0x40, 0x40, 0x40, 0x40, 0x00, -0x00, 0x03, 0x07, 0x08, 0x00, 0x00, -0x20, 0x54, 0x54, 0x78, 0x40, 0x00, -0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, -0x38, 0x44, 0x44, 0x44, 0x28, 0x00, -0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, -0x38, 0x54, 0x54, 0x54, 0x18, 0x00, -0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, -0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, -0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, -0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, -0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, -0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, -0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, -0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, -0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, -0x38, 0x44, 0x44, 0x44, 0x38, 0x00, -0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, -0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, -0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, -0x48, 0x54, 0x54, 0x54, 0x24, 0x00, -0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, -0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, -0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, -0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, -0x44, 0x28, 0x10, 0x28, 0x44, 0x00, -0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, -0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, -0x00, 0x08, 0x36, 0x41, 0x00, 0x00, -0x00, 0x00, 0x77, 0x00, 0x00, 0x00, -0x00, 0x41, 0x36, 0x08, 0x00, 0x00, -0x02, 0x01, 0x02, 0x04, 0x02, 0x00, -0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xFC, 0xFC, 0xFC, 0xFC, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, - 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, - 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, - 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x80, 0xC0, 0xF0, 0xF8, 0xF8, - 0xF8, 0xF8, 0xF8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, - 0xE0, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, -0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, -0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, -0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, -0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, -0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, -0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, -0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE, - 0xFF, 0x1F, 0x07, 0x07, 0x07, 0x07, - 0x1F, 0x1F, 0x1F, 0x1E, 0x18, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, - 0x00, 0x00, 0x00, 0x9E, 0xDF, 0xDF, - 0xCF, 0xC7, 0xE7, 0xE7, 0xE7, 0xFF, - 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x03, - 0x3F, 0xFF, 0xFF, 0xFE, 0xC0, 0x00, - 0xF0, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, - 0xF0, 0x00, 0xC0, 0xFC, 0xFF, 0xFF, - 0x3F, 0x03, 0x00, 0xC0, 0xF0, 0xF8, - 0xFE, 0x9F, 0x87, 0x83, 0x80, 0xFF, - 0xFF, 0xFF, 0xFF, 0x80, 0x80, 0x00, - 0x00, 0xE0, 0xF8, 0xFC, 0xBF, 0x8F, - 0x83, 0x81, 0xFF, 0xFF, 0xFF, 0xFF, - 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, -0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, -0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, -0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, -0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, -0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, -0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, -0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x07, 0x1F, 0x3F, - 0x7F, 0x7C, 0x78, 0x70, 0x70, 0x78, - 0x7E, 0x3E, 0x3E, 0x0E, 0x06, 0x00, - 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x00, - 0x00, 0x00, 0x1F, 0x3F, 0x7F, 0x7F, - 0x79, 0x71, 0x70, 0x30, 0x38, 0x3F, - 0x7F, 0x7F, 0x7F, 0x60, 0x00, 0x00, - 0x00, 0x01, 0x1F, 0x7F, 0x7F, 0x7E, - 0x7F, 0x1F, 0x01, 0x00, 0x01, 0x3F, - 0x7F, 0x7E, 0x7F, 0x7F, 0x0F, 0x01, - 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, - 0x03, 0x03, 0x03, 0x03, 0x03, 0x7F, - 0x7F, 0x7F, 0x7F, 0x03, 0x03, 0x00, - 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, - 0x03, 0x03, 0x7F, 0x7F, 0x7F, 0x7F, - 0x07, 0x03, 0x03, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; -#endif // FONT5X7_H diff --git a/keyboards/claw44/lib/host_led_state_reader.c b/keyboards/claw44/lib/host_led_state_reader.c deleted file mode 100644 index 980823b318c..00000000000 --- a/keyboards/claw44/lib/host_led_state_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#include -#include "claw44.h" - -char host_led_state_str[24]; - -const char *read_host_led_state(void) -{ - uint8_t leds = host_keyboard_leds(); - snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", - (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); - - return host_led_state_str; -} diff --git a/keyboards/claw44/lib/keylogger.c b/keyboards/claw44/lib/keylogger.c deleted file mode 100644 index 092b6929bc2..00000000000 --- a/keyboards/claw44/lib/keylogger.c +++ /dev/null @@ -1,45 +0,0 @@ -#include -#include "claw44.h" - -char keylog_str[24] = {}; -char keylogs_str[21] = {}; -int keylogs_str_idx = 0; - -const char code_to_name[60] = { - ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', - 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', - 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', - '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', - 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', - ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; - -void set_keylog(uint16_t keycode, keyrecord_t *record) { - char name = ' '; - if (keycode < 60) { - name = code_to_name[keycode]; - } - - // update keylog - snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", - record->event.key.row, record->event.key.col, - keycode, name); - - // update keylogs - if (keylogs_str_idx == sizeof(keylogs_str) - 1) { - keylogs_str_idx = 0; - for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { - keylogs_str[i] = ' '; - } - } - - keylogs_str[keylogs_str_idx] = name; - keylogs_str_idx++; -} - -const char *read_keylog(void) { - return keylog_str; -} - -const char *read_keylogs(void) { - return keylogs_str; -} diff --git a/keyboards/claw44/lib/layer_state_reader.c b/keyboards/claw44/lib/layer_state_reader.c deleted file mode 100644 index d92b6df5827..00000000000 --- a/keyboards/claw44/lib/layer_state_reader.c +++ /dev/null @@ -1,35 +0,0 @@ - -#include QMK_KEYBOARD_H -#include -#include "claw44.h" - -#define L_BASE 0 -#define L_LOWER (1<<_LOWER) -#define L_RAISE (1<<_RAISE) -#define L_ADJUST (1<<_ADJUST) -#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) - -char layer_state_str[24]; - -const char *read_layer_state(void) { - switch (layer_state) - { - case L_BASE: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); - break; - case L_RAISE: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); - break; - case L_LOWER: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); - break; - case L_ADJUST: - case L_ADJUST_TRI: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); - break; - default: - snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); - } - - return layer_state_str; -} diff --git a/keyboards/claw44/lib/logo_reader.c b/keyboards/claw44/lib/logo_reader.c deleted file mode 100644 index b5b437b2b89..00000000000 --- a/keyboards/claw44/lib/logo_reader.c +++ /dev/null @@ -1,11 +0,0 @@ -#include "claw44.h" - -const char *read_logo(void) { - static char logo[] = { - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, - 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, - 0}; - - return logo; -} diff --git a/keyboards/claw44/lib/mode_icon_reader.c b/keyboards/claw44/lib/mode_icon_reader.c deleted file mode 100644 index a9272bb9a78..00000000000 --- a/keyboards/claw44/lib/mode_icon_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#include -#include "claw44.h" - -char mode_icon[24]; - -const char *read_mode_icon(bool swap) { - static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; - if (swap == false) { - snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]); - } else { - snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]); - } - - return mode_icon; -} diff --git a/keyboards/claw44/lib/rgb_state_reader.c b/keyboards/claw44/lib/rgb_state_reader.c deleted file mode 100644 index e0efe2e5288..00000000000 --- a/keyboards/claw44/lib/rgb_state_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#ifdef RGBLIGHT_ENABLE - -#include QMK_KEYBOARD_H -#include - -extern rgblight_config_t rgblight_config; -char rbf_info_str[24]; -const char *read_rgb_info(void) { - - snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", - rgblight_config.enable ? "on" : "- ", rgblight_config.mode, - rgblight_config.hue, rgblight_config.sat, rgblight_config.val); - return rbf_info_str; -} -#endif diff --git a/keyboards/claw44/lib/timelogger.c b/keyboards/claw44/lib/timelogger.c deleted file mode 100644 index ecd4ed3ea8c..00000000000 --- a/keyboards/claw44/lib/timelogger.c +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include "claw44.h" - -char timelog_str[24] = {}; -int last_time = 0; -int elapsed_time = 0; - -void set_timelog(void) { - elapsed_time = timer_elapsed(last_time); - last_time = timer_read(); - snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time); -} - -const char *read_timelog(void) { - return timelog_str; -} diff --git a/keyboards/claw44/readme.md b/keyboards/claw44/readme.md deleted file mode 100644 index 7e72e089713..00000000000 --- a/keyboards/claw44/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Claw44 - -![Claw44](https://i.imgur.com/5a8iogl.jpg) - -A split keyboard with 3x6 vertically staggered keys and 4 thumb keys. - -Keyboard Maintainer: [@yfuku_](https://twitter.com/yfuku_) -Hardware Supported: Claw44 PCB, ProMicro -Hardware Availability: https://yfuku.booth.pm/ - -Make example for this keyboard (after setting up your build environment): - - make claw44:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h deleted file mode 100644 index f3406fee5c3..00000000000 --- a/keyboards/claw44/rev1/config.h +++ /dev/null @@ -1,76 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER yfuku -#define PRODUCT claw44 -#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 7 -#define MATRIX_ROW_PINS { D4, C6, D7, E6 } - -// wiring of each half -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } -// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -/* -#define RGB_DI_PIN D3 - -#define RGBLED_NUM 12 // Number of LEDs -*/ - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/claw44/rev1/matrix.c b/keyboards/claw44/rev1/matrix.c deleted file mode 100644 index 718cc574481..00000000000 --- a/keyboards/claw44/rev1/matrix.c +++ /dev/null @@ -1,357 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "split_scomm.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - TXLED0; - RXLED0; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(int master_changed) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; -#ifdef SERIAL_USE_MULTI_TRANSACTION - int ret=serial_update_buffers(master_changed); -#else - int ret=serial_update_buffers(); -#endif - if (ret ) { - if(ret==2) RXLED1; - return 1; - } - RXLED0; - memcpy(&matrix[slaveOffset], - (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - memcpy(&matrix[offset], - (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - int mchanged = 1; - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - mchanged = memcmp((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); - #endif - memcpy((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction(mchanged) ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - int change = 0; - #endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - #ifdef SERIAL_USE_MULTI_TRANSACTION - if( serial_slave_buffer[i] != matrix[offset+i] ) - change = 1; - #endif - serial_slave_buffer[i] = matrix[offset+i]; - } - #ifdef SERIAL_USE_MULTI_TRANSACTION - slave_buffer_change_count += change; - #endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/claw44/rev1/rev1.c deleted file mode 100644 index 9529636f563..00000000000 --- a/keyboards/claw44/rev1/rev1.c +++ /dev/null @@ -1,8 +0,0 @@ -#include "claw44.h" - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - //led_set_user(usb_led); -} -#endif diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/claw44/rev1/rev1.h deleted file mode 100644 index f7ec2cbfe65..00000000000 --- a/keyboards/claw44/rev1/rev1.h +++ /dev/null @@ -1,57 +0,0 @@ -#pragma once - -#include "../claw44.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, R30, R31, R32, R33 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05 }, \ - { L10, L11, L12, L13, L14, L15 }, \ - { L20, L21, L22, L23, L24, L25 }, \ - { KC_NO, KC_NO, L30, L31, L32, L33 }, \ - { R05, R04, R03, R02, R01, R00 }, \ - { R15, R14, R13, R12, R11, R10 }, \ - { R25, R24, R23, R22, R21, R20 }, \ - { KC_NO, KC_NO, R33, R32, R31, R30 } \ - } - -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, R30, R31, R32, R33 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \ - ) - -enum layer_number { - _QWERTY = 0, - _LOWER, - _RAISE, - _ADJUST, -}; diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk deleted file mode 100644 index ae95ec40145..00000000000 --- a/keyboards/claw44/rev1/rules.mk +++ /dev/null @@ -1,31 +0,0 @@ -SRC += rev1/matrix.c -SRC += rev1/split_util.c -SRC += rev1/split_scomm.c - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -# If you want to change the display of OLED, you need to change here -SRC += ./lib/glcdfont.c \ - ./lib/layer_state_reader.c \ - ./lib/logo_reader.c \ - ./lib/keylogger.c \ - # ./lib/rgb_state_reader.c \ - # ./lib/mode_icon_reader.c \ - # ./lib/host_led_state_reader.c \ - # ./lib/timelogger.c \ diff --git a/keyboards/claw44/rev1/serial_config.h b/keyboards/claw44/rev1/serial_config.h deleted file mode 100644 index 4fab8e8ddfc..00000000000 --- a/keyboards/claw44/rev1/serial_config.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef SOFT_SERIAL_PIN -#define SOFT_SERIAL_PIN D2 -#define SERIAL_USE_MULTI_TRANSACTION -#endif diff --git a/keyboards/claw44/rev1/split_scomm.c b/keyboards/claw44/rev1/split_scomm.c deleted file mode 100644 index a1fe6ba5b82..00000000000 --- a/keyboards/claw44/rev1/split_scomm.c +++ /dev/null @@ -1,91 +0,0 @@ -#ifdef USE_SERIAL -#ifdef SERIAL_USE_MULTI_TRANSACTION -/* --- USE flexible API (using multi-type transaction function) --- */ - -#include -#include -#include -#include -#include "serial.h" -#ifdef CONSOLE_ENABLE - #include -#endif - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; -uint8_t volatile status_com = 0; -uint8_t volatile status1 = 0; -uint8_t slave_buffer_change_count = 0; -uint8_t s_change_old = 0xff; -uint8_t s_change_new = 0xff; - -SSTD_t transactions[] = { -#define GET_SLAVE_STATUS 0 - /* master buffer not changed, only recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - 0, NULL, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define PUT_MASTER_GET_SLAVE_STATUS 1 - /* master buffer changed need send, and recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define GET_SLAVE_BUFFER 2 - /* recive serial_slave_buffer */ - { (uint8_t *)&status1, - 0, NULL, - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - } -}; - -void serial_master_init(void) -{ - soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); -} - -void serial_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); -} - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(int master_update) -{ - int status, smatstatus; - static int need_retry = 0; - - if( s_change_old != s_change_new ) { - smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); - if( smatstatus == TRANSACTION_END ) { - s_change_old = s_change_new; -#ifdef CONSOLE_ENABLE - uprintf("slave matrix = %b %b %b %b\n", - serial_slave_buffer[0], serial_slave_buffer[1], - serial_slave_buffer[2], serial_slave_buffer[3]); -#endif - } - } else { - // serial_slave_buffer dosen't change - smatstatus = TRANSACTION_END; // dummy status - } - - if( !master_update && !need_retry) { - status = soft_serial_transaction(GET_SLAVE_STATUS); - } else { - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - } - if( status == TRANSACTION_END ) { - s_change_new = slave_buffer_change_count; - need_retry = 0; - } else { - need_retry = 1; - } - return smatstatus; -} - -#endif // SERIAL_USE_MULTI_TRANSACTION -#endif /* USE_SERIAL */ diff --git a/keyboards/claw44/rev1/split_scomm.h b/keyboards/claw44/rev1/split_scomm.h deleted file mode 100644 index 873d8939d81..00000000000 --- a/keyboards/claw44/rev1/split_scomm.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef SPLIT_COMM_H -#define SPLIT_COMM_H - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ -#include "serial.h" - -#else -/* --- USE flexible API (using multi-type transaction function) --- */ -// Buffers for master - slave communication -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -extern uint8_t slave_buffer_change_count; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(int master_changed); - -#endif - -#endif /* SPLIT_COMM_H */ diff --git a/keyboards/claw44/rev1/split_util.c b/keyboards/claw44/rev1/split_util.c deleted file mode 100644 index e1ff8b4379d..00000000000 --- a/keyboards/claw44/rev1/split_util.c +++ /dev/null @@ -1,70 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "split_scomm.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk deleted file mode 100644 index 907a5c83253..00000000000 --- a/keyboards/claw44/rules.mk +++ /dev/null @@ -1,74 +0,0 @@ -SRC += i2c.c -SRC += serial.c -SRC += ssd1306.c - -# if firmware size over limit, try this option -# CFLAGS += -flto - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -DEFAULT_FOLDER = claw44/rev1 diff --git a/keyboards/claw44/serial.c b/keyboards/claw44/serial.c deleted file mode 100644 index 325c29a3f70..00000000000 --- a/keyboards/claw44/serial.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include -#include "serial.h" -//#include - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -//////////////// for backward compatibility //////////////////////////////// -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - #endif - uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - #else - 0, (uint8_t *)NULL, - #endif - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - #else - 0, (uint8_t *)NULL, - #endif - } -}; - -void serial_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void serial_slave_init(void) -{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers() -{ - int result; - result = soft_serial_transaction(); - return result; -} - -#endif // end of Simple API (OLD API, compatible with let's split serial.c) -//////////////////////////////////////////////////////////////////////////// - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/claw44/serial.h b/keyboards/claw44/serial.h deleted file mode 100644 index 7e0c0847a43..00000000000 --- a/keyboards/claw44/serial.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef SOFT_SERIAL_H -#define SOFT_SERIAL_H - -#include - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE Simple API (OLD API, compatible with let's split serial.c) -// ex. -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH 1 -// -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ -#if SERIAL_SLAVE_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -#endif -#if SERIAL_MASTER_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -#endif - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); - -#endif // USE Simple API - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif - -#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/claw44/ssd1306.c b/keyboards/claw44/ssd1306.c deleted file mode 100644 index e32fc091c24..00000000000 --- a/keyboards/claw44/ssd1306.c +++ /dev/null @@ -1,346 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include -#include "print.h" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -extern const unsigned char font[] PROGMEM; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ - -// 'last_flush' is declared as uint16_t, -// so this must be less than 65535 -#define ScreenOffInterval 60000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -static bool force_dirty = true; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { - char data_ln[strlen(data)+2]; - snprintf(data_ln, sizeof(data_ln), "%s\n", data); - matrix_write(matrix, data_ln); -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty|| force_dirty) { - iota_gfx_flush(); - force_dirty = false; - } - - /* - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } - */ -} - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { - force_dirty = true; - return true; -} - -#endif diff --git a/keyboards/claw44/ssd1306.h b/keyboards/claw44/ssd1306.h deleted file mode 100644 index ea8c9232805..00000000000 --- a/keyboards/claw44/ssd1306.h +++ /dev/null @@ -1,91 +0,0 @@ -#pragma once - -#include -#include -#include "pincontrol.h" -#include "action.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record); \ No newline at end of file diff --git a/keyboards/clueboard/17/17.c b/keyboards/clueboard/17/17.c deleted file mode 100644 index 627aa236ddb..00000000000 --- a/keyboards/clueboard/17/17.c +++ /dev/null @@ -1,57 +0,0 @@ -#include "17.h" - -int pwm_level; - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<> 8; - OCR4A = 0xFF & pwm_level; -} diff --git a/keyboards/clueboard/17/17.h b/keyboards/clueboard/17/17.h deleted file mode 100644 index af3be4f5a98..00000000000 --- a/keyboards/clueboard/17/17.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef CLUEPAD_H -#define CLUEPAD_H - -#include "quantum.h" - - -/* Cluepad matrix layout - * .-------------------. - * |NLCK| /| *| -| - * |-------------------| - * | 7| 8| 9| | - * |--------------| | - * | 4| 5| 6| +| - * |-------------------| - * | 1| 2| 3| | - * |--------------| | - * | 0| .| Ent| - * '-------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_numpad_5x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, \ - k20, k21, k22, k13, \ - k30, k31, k32, \ - k40, k42, k33 \ -) { \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, KC_NO }, \ - { k30, k31, k32, k33 }, \ - { k40, KC_NO, k42, KC_NO } \ -} - -#define LAYOUT LAYOUT_numpad_5x4 -#define KEYMAP LAYOUT_numpad_5x4 - -#endif diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h deleted file mode 100644 index b7e28cbb9f3..00000000000 --- a/keyboards/clueboard/17/config.h +++ /dev/null @@ -1,95 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2312 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Cluepad with RGB Underlighting -#define DESCRIPTION QMK keyboard firmware for Cluepad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 -* pin: -*/ -#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 } -/* Column pin configuration - * col: 0 1 2 3 - * pin: F4 E6 B1 D2 - */ -#define MATRIX_COL_PINS { F4, E6, B1, D2 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Number of backlighting levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Underlight configuration - */ -#define RGB_DI_PIN F6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* Debug forcibly enabled */ -#define ALWAYS_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/clueboard/17/info.json b/keyboards/clueboard/17/info.json deleted file mode 100644 index 12338ae1d34..00000000000 --- a/keyboards/clueboard/17/info.json +++ /dev/null @@ -1,31 +0,0 @@ -{ - "keyboard_name": "Clueboard 17% (Cluepad)", - "keyboard_folder": "clueboard/17", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 5, - "layouts": { - "LAYOUT_numpad_5x4": { - "layout": [ - {"label":"Num Lock", "x":0, "y":0}, - {"label":"/", "x":1, "y":0}, - {"label":"*", "x":2, "y":0}, - {"label":"-", "x":3, "y":0}, - {"label":"7", "x":0, "y":1}, - {"label":"8", "x":1, "y":1}, - {"label":"9", "x":2, "y":1}, - {"label":"4", "x":0, "y":2}, - {"label":"5", "x":1, "y":2}, - {"label":"6", "x":2, "y":2}, - {"label":"+", "x":3, "y":1, "h":2}, - {"label":"1", "x":0, "y":3}, - {"label":"2", "x":1, "y":3}, - {"label":"3", "x":2, "y":3}, - {"label":"0", "x":0, "y":4, "w":2}, - {"label":".", "x":2, "y":4}, - {"label":"Enter", "x":3, "y":3, "h":2} - ] - } - } -} diff --git a/keyboards/clueboard/17/keymaps/default/keymap.c b/keyboards/clueboard/17/keymaps/default/keymap.c deleted file mode 100644 index 65c64e43c4f..00000000000 --- a/keyboards/clueboard/17/keymaps/default/keymap.c +++ /dev/null @@ -1,52 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * .-------------------. - * |NL F| /| *| -| - * |-------------------| - * | 7| 8| 9| | - * |--------------| | - * | 4| 5| 6| +| - * |-------------------| - * | 1| 2| 3| | - * |--------------| | - * | 0| .| Ent| - * '-------------------' - */ - [_BL] = LAYOUT_numpad_5x4( - LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, KC_PDOT, KC_PENT \ - ), - - /* Keymap _FL: Function Layer - * .-------------------. - * |NL F| | | Fn0| - * |-------------------| - * | | Fn4| | | - * |--------------| | - * | Fn3|BL_S| Fn2| Fn6| - * |-------------------| - * | | Fn5| | | - * |--------------| | - * | Fn1| | Fn7| - * '-------------------' - */ - [_FL] = LAYOUT_numpad_5x4( - LT(_FL, KC_NLCK), _______, _______, RGB_TOG, \ - _______, RGB_SAI, _______, \ - RGB_HUD, BL_STEP, RGB_HUI, RGB_VAI, \ - _______, RGB_SAD, _______, \ - RGB_MOD, _______, RGB_VAD \ - ) -}; diff --git a/keyboards/clueboard/17/readme.md b/keyboards/clueboard/17/readme.md deleted file mode 100644 index c183657f96b..00000000000 --- a/keyboards/clueboard/17/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Clueboard 17% (Formerly Cluepad) - -![Clueboard 17%](https://i.imgur.com/3XBC5c0.jpg) - -A basic 17 key numpad PCB. - -* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: - * Cluepad PCB 1.0 -* Hardware Availability: [clueboard.co](https://clueboard.co/) - -Make example for this keyboard (after setting up your build environment): - - make clueboard/17:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk deleted file mode 100644 index 591d40f030c..00000000000 --- a/keyboards/clueboard/17/rules.mk +++ /dev/null @@ -1,60 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/clueboard/2x1800/2x1800.c b/keyboards/clueboard/2x1800/2x1800.c deleted file mode 100644 index 09c90adbcf6..00000000000 --- a/keyboards/clueboard/2x1800/2x1800.c +++ /dev/null @@ -1,57 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "2x1800.h" - -void matrix_init_kb(void) { - // Set our LED pins as output - DDRB |= (1<<4); // Numlock - DDRB |= (1<<5); // Capslock - DDRB |= (1<<6); // Scroll Lock - - // Run the keymap level init - matrix_init_user(); -} - -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // Toggle numlock as needed - if (usb_led & (1< - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef TWOX1800_H -#define TWOX1800_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT_4u_space( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, kb0, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT_7u_space( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, kb0, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, KC_NO, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT LAYOUT_all - -#endif diff --git a/keyboards/clueboard/2x1800/config.h b/keyboards/clueboard/2x1800/config.h deleted file mode 100644 index e343011f954..00000000000 --- a/keyboards/clueboard/2x1800/config.h +++ /dev/null @@ -1,195 +0,0 @@ -/* -Copyright 2017 Zach White - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x23A0 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Double 1800 -#define DESCRIPTION What does it mean? - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { C0, C1, C2, C3, C7, F7, B1, F2, F3, F4, F5, F6 } -#define MATRIX_COL_PINS { D2, D3, D4, D5, D7, E0, E1, B0, E6, B3, B2 } -#define UNUSED_PINS { D0, D1, D6, C5, C6, E4, E5, E7, F0, F1, A0, A1, A2, A3, A4, A5, A6, A7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* audio support */ -#define B7_AUDIO -#define C4_AUDIO -#define AUDIO_CLICKY - -/* number of backlight levels */ -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN C6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/clueboard/2x1800/info.json b/keyboards/clueboard/2x1800/info.json deleted file mode 100644 index 0e3bb36a9d8..00000000000 --- a/keyboards/clueboard/2x1800/info.json +++ /dev/null @@ -1,42 +0,0 @@ -{ - "keyboard_name": "Clueboard 2x1800", - "url": "", - "maintainer": "skullydazed", - "width": 24, - "height": 6.5, - "layouts": { - "LAYOUT": { - "key_count": 127, - "layout": [ - {"label":"Home", "x":0, "y":0}, {"label":"End", "x":1, "y":0}, {"label":"PgUp", "x":2, "y":0}, {"label":"PgDn", "x":3, "y":0}, {"label":"Esc", "x":4.75, "y":0}, {"label":"F1", "x":6.25, "y":0}, {"label":"F2", "x":7.25, "y":0}, {"label":"F3", "x":8.25, "y":0}, {"label":"F4", "x":9.25, "y":0}, {"label":"F5", "x":10.75, "y":0}, {"label":"F6", "x":11.75, "y":0}, {"label":"F7", "x":12.75, "y":0}, {"label":"F8", "x":13.75, "y":0}, {"label":"F9", "x":15.25, "y":0}, {"label":"F10", "x":16.25, "y":0}, {"label":"F11", "x":17.25, "y":0}, {"label":"F12", "x":18.25, "y":0}, {"label":"PrtSc", "x":20, "y":0}, {"label":"Scroll Lock", "x":21, "y":0}, {"label":"Pause", "x":22, "y":0}, {"label":"Insert", "x":23, "y":0}, - {"label":"-", "x":0, "y":1.25}, {"label":"Num Lock", "x":1, "y":1.25}, {"label":"/", "x":2, "y":1.25}, {"label":"*", "x":3, "y":1.25}, {"label":"~", "x":4.5, "y":1.25}, {"label":"!", "x":5.5, "y":1.25}, {"label":"@", "x":6.5, "y":1.25}, {"label":"#", "x":7.5, "y":1.25}, {"label":"$", "x":8.5, "y":1.25}, {"label":"%", "x":9.5, "y":1.25}, {"label":"^", "x":10.5, "y":1.25}, {"label":"&", "x":11.5, "y":1.25}, {"label":"*", "x":12.5, "y":1.25}, {"label":"(", "x":13.5, "y":1.25}, {"label":")", "x":14.5, "y":1.25}, {"label":"_", "x":15.5, "y":1.25}, {"label":"+", "x":16.5, "y":1.25}, {"label":"Backspace", "x":17.5, "y":1.25, "w":2}, {"label":"Num Lock", "x":20, "y":1.25}, {"label":"/", "x":21, "y":1.25}, {"label":"*", "x":22, "y":1.25}, {"label":"-", "x":23, "y":1.25}, - {"label":"+", "x":0, "y":2.25, "h":2}, {"label":"7", "x":1, "y":2.25}, {"label":"8", "x":2, "y":2.25}, {"label":"9", "x":3, "y":2.25}, {"label":"Tab", "x":4.5, "y":2.25, "w":1.5}, {"label":"Q", "x":6, "y":2.25}, {"label":"W", "x":7, "y":2.25}, {"label":"E", "x":8, "y":2.25}, {"label":"R", "x":9, "y":2.25}, {"label":"T", "x":10, "y":2.25}, {"label":"Y", "x":11, "y":2.25}, {"label":"U", "x":12, "y":2.25}, {"label":"I", "x":13, "y":2.25}, {"label":"O", "x":14, "y":2.25}, {"label":"P", "x":15, "y":2.25}, {"label":"{", "x":16, "y":2.25}, {"label":"}", "x":17, "y":2.25}, {"label":"|", "x":18, "y":2.25, "w":1.5}, {"label":"7", "x":20, "y":2.25}, {"label":"8", "x":21, "y":2.25}, {"label":"9", "x":22, "y":2.25}, {"label":"+", "x":23, "y":2.25, "h":2}, - {"label":"4", "x":1, "y":3.25}, {"label":"5", "x":2, "y":3.25}, {"label":"6", "x":3, "y":3.25}, {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75}, {"label":"A", "x":6.25, "y":3.25}, {"label":"S", "x":7.25, "y":3.25}, {"label":"D", "x":8.25, "y":3.25}, {"label":"F", "x":9.25, "y":3.25}, {"label":"G", "x":10.25, "y":3.25}, {"label":"H", "x":11.25, "y":3.25}, {"label":"J", "x":12.25, "y":3.25}, {"label":"K", "x":13.25, "y":3.25}, {"label":"L", "x":14.25, "y":3.25}, {"label":":", "x":15.25, "y":3.25}, {"label":"\"", "x":16.25, "y":3.25}, {"label":"Enter", "x":17.25, "y":3.25, "w":2.25}, {"label":"4", "x":20, "y":3.25}, {"label":"5", "x":21, "y":3.25}, {"label":"6", "x":22, "y":3.25}, - {"label":"Enter", "x":0, "y":4.25, "h":2}, {"label":"1", "x":1, "y":4.25}, {"label":"2", "x":2, "y":4.25}, {"label":"3", "x":3, "y":4.25}, {"label":"\\u2191", "x":4.25, "y":4.5}, {"label":"Shift", "x":5.5, "y":4.25, "w":1.25}, {"label":"Z", "x":6.75, "y":4.25}, {"label":"X", "x":7.75, "y":4.25}, {"label":"C", "x":8.75, "y":4.25}, {"label":"V", "x":9.75, "y":4.25}, {"label":"B", "x":10.75, "y":4.25}, {"label":"N", "x":11.75, "y":4.25}, {"label":"M", "x":12.75, "y":4.25}, {"label":"<", "x":13.75, "y":4.25}, {"label":">", "x":14.75, "y":4.25}, {"label":"?", "x":15.75, "y":4.25}, {"label":"Shift", "x":16.75, "y":4.25, "w":1.75}, {"label":"\\u2191", "x":18.75, "y":4.5}, {"label":"1", "x":20, "y":4.25}, {"label":"2", "x":21, "y":4.25}, {"label":"3", "x":22, "y":4.25}, {"label":"Enter", "x":23, "y":4.25, "h":2}, - {"label":"0", "x":1, "y":5.25}, {"label":".", "x":2, "y":5.25}, {"label":"\\u2190", "x":3.25, "y":5.5}, {"label":"\\u2193", "x":4.25, "y":5.5}, {"label":"\\u2192", "x":5.25, "y":5.5}, {"label":"Ctrl", "x":6.5, "y":5.25}, {"label":"Win", "x":7.5, "y":5.25}, {"label":"Alt", "x":8.5, "y":5.25}, {"label":"1u", "x":9.5, "y":5.25}, {"label":"1u", "x":10.5, "y":5.25}, {"label":"1u", "x":11.5, "y":5.25}, {"label":"1u", "x":12.5, "y":5.25}, {"label":"Alt", "x":13.5, "y":5.25}, {"label":"Win", "x":14.5, "y":5.25}, {"label":"Menu", "x":15.5, "y":5.25}, {"label":"Ctrl", "x":16.5, "y":5.25}, {"label":"\\u2190", "x":17.75, "y":5.5}, {"label":"\\u2193", "x":18.75, "y":5.5}, {"label":"\\u2192", "x":19.75, "y":5.5}, {"label":"0", "x":21, "y":5.25}, {"label":".", "x":22, "y":5.25} - ] - }, - "LAYOUT_7u_space": { - "key_count": 121, - "layout": [ - {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0}, - {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25}, - {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2}, - {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25}, - {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5}, - {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"kb0", "x":8.5, "y":5.25, "w":7}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5} - ] - }, - "LAYOUT_4u_space": { - "key_count": 124, - "layout": [ - {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0}, - {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25}, - {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2}, - {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25}, - {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5}, - {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"k58", "x":8.5, "y":5.25}, {"label":"kb0", "x":9.5, "y":5.25, "w":4}, {"label":"kb2", "x":13.5, "y":5.25}, {"label":"kb3", "x":14.5, "y":5.25}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5} - ] - } - } -} diff --git a/keyboards/clueboard/2x1800/keymaps/default/config.h b/keyboards/clueboard/2x1800/keymaps/default/config.h deleted file mode 100644 index dd48c69e36e..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/default/keymap.c b/keyboards/clueboard/2x1800/keymaps/default/keymap.c deleted file mode 100644 index 2e4b75924d9..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default/keymap.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( - KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - \ - KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_PPLS, KC_P7, KC_P8, KC_P9, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PSLS, \ - KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_PENT, KC_P1, KC_P2, KC_P3, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ -) -}; diff --git a/keyboards/clueboard/2x1800/keymaps/default/readme.md b/keyboards/clueboard/2x1800/keymaps/default/readme.md deleted file mode 100644 index 4e3457efce6..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for 2x1800 diff --git a/keyboards/clueboard/2x1800/keymaps/default_4u/config.h b/keyboards/clueboard/2x1800/keymaps/default_4u/config.h deleted file mode 100644 index 152e2f14875..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_4u/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/default_4u/keymap.c b/keyboards/clueboard/2x1800/keymaps/default_4u/keymap.c deleted file mode 100644 index c33dfd31e65..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_4u/keymap.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_4u_space( - KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - \ - KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_PPLS, KC_P7, KC_P8, KC_P9, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PSLS, \ - KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_PENT, KC_P1, KC_P2, KC_P3, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ -) -}; diff --git a/keyboards/clueboard/2x1800/keymaps/default_4u/readme.md b/keyboards/clueboard/2x1800/keymaps/default_4u/readme.md deleted file mode 100644 index a696972e8c4..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_4u/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for 2x1800 with 4u Spacebar diff --git a/keyboards/clueboard/2x1800/keymaps/default_7u/config.h b/keyboards/clueboard/2x1800/keymaps/default_7u/config.h deleted file mode 100644 index 152e2f14875..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_7u/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/default_7u/keymap.c b/keyboards/clueboard/2x1800/keymaps/default_7u/keymap.c deleted file mode 100644 index 866369a775f..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_7u/keymap.c +++ /dev/null @@ -1,49 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_7u_space( - KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ - \ - KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_PPLS, KC_P7, KC_P8, KC_P9, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PSLS, \ - KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_PENT, KC_P1, KC_P2, KC_P3, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ -) -}; - - -#ifdef AUDIO_ENABLE - float song_one_up[][2] = SONG(ONE_UP_SOUND); -#endif - -volatile uint8_t runonce = true; -static uint16_t my_timer; - -void matrix_init_user(void) { - my_timer = timer_read(); -} - -void matrix_scan_user(void) { - if (runonce && timer_elapsed(my_timer) > 500) { - runonce = false; -#ifdef AUDIO_ENABLE - PLAY_SONG(song_one_up); -#endif - } -} diff --git a/keyboards/clueboard/2x1800/keymaps/default_7u/readme.md b/keyboards/clueboard/2x1800/keymaps/default_7u/readme.md deleted file mode 100644 index f5718e842dc..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/default_7u/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for 2x1800 with 7u spacebar diff --git a/keyboards/clueboard/2x1800/keymaps/macroboard/config.h b/keyboards/clueboard/2x1800/keymaps/macroboard/config.h deleted file mode 100644 index 152e2f14875..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/macroboard/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/macroboard/keymap.c b/keyboards/clueboard/2x1800/keymaps/macroboard/keymap.c deleted file mode 100644 index f69ed801e76..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/macroboard/keymap.c +++ /dev/null @@ -1,123 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -enum custom_keycodes { - MACRO01 = SAFE_RANGE, - MACRO02, - MACRO03, - MACRO04, - MACRO05, - MACRO06, - MACRO07, - MACRO08, - MACRO09, - MACRO10, - MACRO11, - MACRO12, - MACRO13, - MACRO14, - MACRO15, - MACRO16, - MACRO17, - MACRO18, - MACRO19, - MACRO20, - MACRO21, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( - MACRO01, MACRO02, MACRO03, MACRO04, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - \ - MACRO05, MACRO06, MACRO07, MACRO08, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - MACRO09, MACRO10, MACRO11, MACRO12, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PSLS, \ - MACRO13, MACRO14, MACRO15, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - MACRO16, MACRO17, MACRO18, MACRO19, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - MACRO20, MACRO21, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ -) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - case MACRO01: - SEND_STRING("This is macro 01"); - return false; - case MACRO02: - SEND_STRING("This is macro 02"); - return false; - case MACRO03: - SEND_STRING("This is macro 03"); - return false; - case MACRO04: - SEND_STRING("This is macro 04"); - return false; - case MACRO05: - SEND_STRING("This is macro 05"); - return false; - case MACRO06: - SEND_STRING("This is macro 06"); - return false; - case MACRO07: - SEND_STRING("This is macro 07"); - return false; - case MACRO08: - SEND_STRING("This is macro 08"); - return false; - case MACRO09: - SEND_STRING("This is macro 09"); - return false; - case MACRO10: - SEND_STRING("This is macro 10"); - return false; - case MACRO11: - SEND_STRING("This is macro 11"); - return false; - case MACRO12: - SEND_STRING("This is macro 12"); - return false; - case MACRO13: - SEND_STRING("This is macro 13"); - return false; - case MACRO14: - SEND_STRING("This is macro 14"); - return false; - case MACRO15: - SEND_STRING("This is macro 15"); - return false; - case MACRO16: - SEND_STRING("This is macro 16"); - return false; - case MACRO17: - SEND_STRING("This is macro 17"); - return false; - case MACRO18: - SEND_STRING("This is macro 18"); - return false; - case MACRO19: - SEND_STRING("This is macro 19"); - return false; - case MACRO20: - SEND_STRING("This is macro 20"); - return false; - case MACRO21: - SEND_STRING("This is macro 21"); - return false; - } - } - return true; -}; diff --git a/keyboards/clueboard/2x1800/keymaps/macroboard/readme.md b/keyboards/clueboard/2x1800/keymaps/macroboard/readme.md deleted file mode 100644 index 61c9468e7dc..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/macroboard/readme.md +++ /dev/null @@ -1 +0,0 @@ -# A macro keymap template diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/config.h b/keyboards/clueboard/2x1800/keymaps/mouseboard_left/config.h deleted file mode 100644 index 152e2f14875..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/keymap.c b/keyboards/clueboard/2x1800/keymaps/mouseboard_left/keymap.c deleted file mode 100644 index e0c97aadac0..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/keymap.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( - KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - \ - KC_NO, KC_NO, KC_BTN4, KC_BTN5, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_WH_U, KC_NO, KC_MS_U, KC_NO, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PSLS, \ - KC_MS_L, KC_BTN3, KC_MS_R, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_WH_D, KC_BTN1, KC_MS_D, KC_BTN2, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_WH_L, KC_WH_R, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ -) -}; diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/readme.md b/keyboards/clueboard/2x1800/keymaps/mouseboard_left/readme.md deleted file mode 100644 index 41304eca5e9..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_left/readme.md +++ /dev/null @@ -1 +0,0 @@ -# Mouse keys in the left numpad diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/config.h b/keyboards/clueboard/2x1800/keymaps/mouseboard_right/config.h deleted file mode 100644 index 152e2f14875..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// place overrides here diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/keymap.c b/keyboards/clueboard/2x1800/keymaps/mouseboard_right/keymap.c deleted file mode 100644 index d140f5d74ef..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/keymap.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2017 Zach White - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( - KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \ - \ - KC_PMNS, KC_NLCK, KC_PSLS, KC_PAST, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, \ - KC_PPLS, KC_P7, KC_P8, KC_P9, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_NO, KC_MS_U, KC_NO, KC_WH_U, \ - KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_MS_L, KC_BTN3, KC_MS_R, \ - KC_PENT, KC_P1, KC_P2, KC_P3, KC_UP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_BTN1, KC_MS_D, KC_BTN2, KC_WH_D, \ - KC_P0, KC_PDOT, KC_LEFT, KC_DOWN, KC_RGHT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_WH_L, KC_WH_R \ -) -}; diff --git a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/readme.md b/keyboards/clueboard/2x1800/keymaps/mouseboard_right/readme.md deleted file mode 100644 index 51939d6347f..00000000000 --- a/keyboards/clueboard/2x1800/keymaps/mouseboard_right/readme.md +++ /dev/null @@ -1 +0,0 @@ -# Mouse keys in the right numpad diff --git a/keyboards/clueboard/2x1800/readme.md b/keyboards/clueboard/2x1800/readme.md deleted file mode 100644 index 7e2c206ede7..00000000000 --- a/keyboards/clueboard/2x1800/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -# Clueboard 2x1800 - -Clueboard Double 1800 All The Way - -* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: Clueboard 2x1800 PCB -* Hardware Availability: 2018 Apr 1 Group Buy - -Make example for this keyboard: - - make 2x1800:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/2x1800/rules.mk b/keyboards/clueboard/2x1800/rules.mk deleted file mode 100644 index eb679b9fb77..00000000000 --- a/keyboards/clueboard/2x1800/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# MCU details -MCU = at90usb1286 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=1024 - - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -RGBLIGHT_ENABLE = yes # RGB on port C6 -AUDIO_ENABLE = yes # Audio output on port C4 and B7 diff --git a/keyboards/clueboard/60/60.c b/keyboards/clueboard/60/60.c deleted file mode 100644 index aac4e94c3da..00000000000 --- a/keyboards/clueboard/60/60.c +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "60.h" - -void matrix_init_kb(void) { - -} - -void matrix_scan_kb(void) { - -} diff --git a/keyboards/clueboard/60/60.h b/keyboards/clueboard/60/60.h deleted file mode 100644 index 713f0d42be8..00000000000 --- a/keyboards/clueboard/60/60.h +++ /dev/null @@ -1,108 +0,0 @@ -/* Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef CLUEBOARD60_H -#define CLUEBOARD60_H - -#include "quantum.h" - -/* - * These are shortcuts to help you work with the various layout options. If your - * keymap works with one of the LAYOUT_...() macros you are encouraged to use that - * and to contribute your keymap to the corresponding layout in - * `qmk_firmware/layouts/community`. - */ - -/* The fully-featured LAYOUT_all() that has every single key available in the matrix. - */ -#define LAYOUT_all(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* A layout that matches the Apple Extended Keyboard's main area. No split keys, - * 3 mods on either side of the spacebar. - */ -#define LAYOUT_aek(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Standard 60% ANSI layout */ -#define LAYOUT_60_ansi(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Standard 60% ISO layout */ -#define LAYOUT_60_iso(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, KC_NO, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Split Backspace and Right Shift ANSI layout. */ -#define LAYOUT_60_ansi_split_bs_rshift(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -#define LAYOUT LAYOUT_all -#define KEYMAP LAYOUT_all -#endif diff --git a/keyboards/clueboard/60/chconf.h b/keyboards/clueboard/60/chconf.h deleted file mode 100644 index 1d9f12ff1f8..00000000000 --- a/keyboards/clueboard/60/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/60/config.h b/keyboards/clueboard/60/config.h deleted file mode 100644 index aa544c70bba..00000000000 --- a/keyboards/clueboard/60/config.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2350 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard 60% -#define DESCRIPTION Clueboard 60% - -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * COLS: Pins used for columns, left to right - * ROWS: Pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 } -#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C14, C15, C13, B5, B6 } -#define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 } -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - - /* Backlight configuration - */ -#define BACKLIGHT_LEVELS 1 diff --git a/keyboards/clueboard/60/halconf.h b/keyboards/clueboard/60/halconf.h deleted file mode 100644 index e617fdffc79..00000000000 --- a/keyboards/clueboard/60/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/60/info.json b/keyboards/clueboard/60/info.json deleted file mode 100644 index aed18b6f05c..00000000000 --- a/keyboards/clueboard/60/info.json +++ /dev/null @@ -1,59 +0,0 @@ -{ - "keyboard_name": "clueboard/60", - "maintainer": "skullydazed", - "url": "", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_ansi": { - "key_count": 61, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - }, - "LAYOUT_60_iso": { - "key_count": 62, - "layout": [ - {"label": "\\u00ac", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "\"", "x": 2, "y": 0}, {"label": "\\u00a3", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "@", "x": 11.75, "y": 2}, {"label": "~", "x": 12.75, "y": 2}, - {"label": "Shift", "x": 0, "y": 3, "w": 1.25}, {"label": "|", "x": 1.25, "y": 3}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "AltGr", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - }, - "LAYOUT_aek": { - "key_count": 60, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.5}, {"label": "Win", "x": 1.5, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.75, "y": 4, "w": 1.5}, {"x": 4.25, "y": 4, "w": 6.5}, {"label": "AltGr", "x": 10.75, "y": 4, "w": 1.5}, {"label": "Win", "x": 12.25, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.5, "y": 4, "w": 1.5 } - ] - }, - "LAYOUT_all": { - "key_count": 65, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"x": 13, "y": 0}, {"label": "Back", "x": 14, "y": 0}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"x": 12.75, "y": 2}, {"label": "Enter", "x": 13.75, "y": 2, "w": 1.25}, - {"x": 0, "y": 3}, {"label": "Shift", "x": 1, "y": 3, "w": 1.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 1.75}, {"x": 14, "y": 3}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - }, - "LAYOUT_60_ansi_split_bs_rshift": { - "key_count": 63, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"x": 13, "y": 0}, {"label": "Back", "x": 14, "y": 0}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 1.75}, {"x": 14, "y": 3}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25} - ] - } - } -} diff --git a/keyboards/clueboard/60/keymaps/default/keymap.c b/keyboards/clueboard/60/keymaps/default/keymap.c deleted file mode 100644 index 89d2180ca65..00000000000 --- a/keyboards/clueboard/60/keymaps/default/keymap.c +++ /dev/null @@ -1,125 +0,0 @@ -#include QMK_KEYBOARD_H - -enum keyboard_layers { - _BL, - _FL, - _CL -}; - -enum custom_keycodes { - S_BSKTC = SAFE_RANGE, - S_ODEJY, - S_RCKBY, - S_DOEDR, - S_SCALE, - S_ONEUP, - S_COIN, - S_SONIC, - S_ZELDA -}; - -#ifdef AUDIO_ENABLE - float song_basketcase[][2] = SONG(BASKET_CASE); - float song_ode_to_joy[][2] = SONG(ODE_TO_JOY); - float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY); - float song_doe_a_deer[][2] = SONG(DOE_A_DEER); - float song_scale[][2] = SONG(MUSIC_SCALE_SOUND); - float song_coin[][2] = SONG(COIN_SOUND); - float song_one_up[][2] = SONG(ONE_UP_SOUND); - float song_sonic_ring[][2] = SONG(SONIC_RING); - float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE); -#endif - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * |Ctrl |Gui|Alt | Space |Alt |Gui|Fn |Ctrl | - * `-----------------------------------------------------------' - */ - [_BL] = LAYOUT_all( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, \ - KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL), - [_FL] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \ - _______,_______,_______, _______, _______, _______, MO(_FL), _______), - [_CL] = LAYOUT_all( - BL_STEP,S_BSKTC,S_ODEJY,S_RCKBY,S_DOEDR,S_SCALE,S_ONEUP,S_COIN, S_SONIC,S_ZELDA,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______, _______, _______, _______, _______, MO(_FL), _______) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case S_BSKTC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_basketcase); - } - return false; - case S_ODEJY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_ode_to_joy); - } - return false; - case S_RCKBY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_rock_a_bye_baby); - } - return false; - case S_DOEDR: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_doe_a_deer); - } - return false; - case S_SCALE: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_scale); - } - return false; - case S_ONEUP: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_one_up); - } - return false; - case S_COIN: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_coin); - } - return false; - case S_SONIC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_sonic_ring); - } - return false; - case S_ZELDA: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_zelda_puzzle); - } - return false; - } - return true; -} diff --git a/keyboards/clueboard/60/keymaps/default/readme.md b/keyboards/clueboard/60/keymaps/default/readme.md deleted file mode 100644 index 32d4bfba612..00000000000 --- a/keyboards/clueboard/60/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for clueboard 60% diff --git a/keyboards/clueboard/60/keymaps/default_aek/keymap.c b/keyboards/clueboard/60/keymaps/default_aek/keymap.c deleted file mode 100644 index ed4132f415e..00000000000 --- a/keyboards/clueboard/60/keymaps/default_aek/keymap.c +++ /dev/null @@ -1,41 +0,0 @@ -#include QMK_KEYBOARD_H - -enum keyboard_layers { - _BL, - _FL, - _CL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BkSp| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Capslk| A| S| D| F| G| H| J| K| L| ;| '| Enter| - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| - * |-----------------------------------------------------------' - * |Ctrl |Gui|Alt | Space |Alt|Fn |Ctrl | - * `-----------------------------------------------------------' - */ - [_BL] = LAYOUT_aek( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL), - [_FL] = LAYOUT_aek( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______, _______, _______, _______, MO(_FL), _______), - [_CL] = LAYOUT_aek( - BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______, _______, _______, _______, MO(_FL), _______) -}; diff --git a/keyboards/clueboard/60/keymaps/default_aek/readme.md b/keyboards/clueboard/60/keymaps/default_aek/readme.md deleted file mode 100644 index cdec2416091..00000000000 --- a/keyboards/clueboard/60/keymaps/default_aek/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for clueboard 60%, optimized for the AEK layout. diff --git a/keyboards/clueboard/60/keymaps/yanfali/keymap.c b/keyboards/clueboard/60/keymaps/yanfali/keymap.c deleted file mode 100644 index 7c81ea028b6..00000000000 --- a/keyboards/clueboard/60/keymaps/yanfali/keymap.c +++ /dev/null @@ -1,132 +0,0 @@ -#include QMK_KEYBOARD_H - -enum keyboard_layers { - _BL, - _FL, - _CL, - _YF -}; - -enum custom_keycodes { - S_BSKTC = SAFE_RANGE, - S_ODEJY, - S_RCKBY, - S_DOEDR, - S_SCALE, - S_ONEUP, - S_COIN, - S_SONIC, - S_ZELDA -}; - -#ifdef AUDIO_ENABLE - float song_basketcase[][2] = SONG(BASKET_CASE); - float song_ode_to_joy[][2] = SONG(ODE_TO_JOY); - float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY); - float song_doe_a_deer[][2] = SONG(DOE_A_DEER); - float song_scale[][2] = SONG(MUSIC_SCALE_SOUND); - float song_coin[][2] = SONG(COIN_SOUND); - float song_one_up[][2] = SONG(ONE_UP_SOUND); - float song_sonic_ring[][2] = SONG(SONIC_RING); - float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE); -#endif - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------------. - * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| - * |-----------------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------------| - * |MT(CTL, ESC)| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------------' - * |Ctrl |Alt|Gui | Space |Alt |Gui|Fn |Ctrl | - * `-----------------------------------------------------------------' - */ - [_BL] = LAYOUT_all( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \ - MT(MOD_LCTL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, \ - KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, MO(_YF), \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL), - [_FL] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, MO(_YF), \ - _______,_______,_______, _______, _______, _______, MO(_FL), _______), - [_CL] = LAYOUT_all( - BL_STEP,S_BSKTC,S_ODEJY,S_RCKBY,S_DOEDR,S_SCALE,S_ONEUP,S_COIN, S_SONIC,S_ZELDA,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MO(_YF), \ - _______, _______, _______, _______, _______, _______, MO(_FL), _______), - [_YF] = LAYOUT_all( - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,KC_UP ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MO(_YF), \ - _______, _______, _______, _______, _______, _______, MO(_FL), _______) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case S_BSKTC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_basketcase); - } - return false; - case S_ODEJY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_ode_to_joy); - } - return false; - case S_RCKBY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_rock_a_bye_baby); - } - return false; - case S_DOEDR: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_doe_a_deer); - } - return false; - case S_SCALE: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_scale); - } - return false; - case S_ONEUP: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_one_up); - } - return false; - case S_COIN: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_coin); - } - return false; - case S_SONIC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_sonic_ring); - } - return false; - case S_ZELDA: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_zelda_puzzle); - } - return false; - } - return true; -} diff --git a/keyboards/clueboard/60/keymaps/yanfali/readme.md b/keyboards/clueboard/60/keymaps/yanfali/readme.md deleted file mode 100644 index 8b870517620..00000000000 --- a/keyboards/clueboard/60/keymaps/yanfali/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# /u/yanfali keymap for clueboard 60% - -Almost the same as default but differs in the following ways - - 1. `Caps Lock` -> `MT(KC_LCTL, KC_ESC)`. - I'm a heavy vim user and I prefer escape to be closer than default. I also move `Control` to this key if you hold it. - 1. Switch Alt and GUI. - I spend most of my time on OSX, so I reverse Alt and GUI to be - more comfortable on OSX. - 1. Added a custom layer. - I use this to map the cursor keys to WASD, the familiar directional - gaming keys. As I use a split right shift, this naturally leads - to the left hand being used for navigation. This is also the - best place to add custom mappings, macros and combo keys. diff --git a/keyboards/clueboard/60/led.c b/keyboards/clueboard/60/led.c deleted file mode 100644 index 350696736be..00000000000 --- a/keyboards/clueboard/60/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . -*/ - -#include "hal.h" -#include "backlight.h" -#include "led.h" -#include "printf.h" - -void backlight_init_ports(void) { - printf("backlight_init_ports()\n"); - #ifdef BACKLIGHT_ENABLE - palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(GPIOB, 8); - #endif -} - -void backlight_set(uint8_t level) { - printf("backlight_set(%d)\n", level); - #ifdef BACKLIGHT_ENABLE - if (level == 0) { - // Turn backlight off - palSetPad(GPIOB, 8); - } else { - // Turn backlight on - palClearPad(GPIOB, 8); - } - #endif -} - -void led_set_kb(uint8_t usb_led) { - printf("led_set_kb(%d)\n", usb_led); - if (usb_led & (1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 - -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = yes diff --git a/keyboards/clueboard/66/info.json b/keyboards/clueboard/66/info.json deleted file mode 100644 index 514ba456dab..00000000000 --- a/keyboards/clueboard/66/info.json +++ /dev/null @@ -1,36 +0,0 @@ -{ - "keyboard_name": "Clueboard 66%", - "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, - {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, - {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 12.75, "y": 2, "w": 1, "label": "ISOHASH"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, - {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 1.25, "y": 3, "w": 1, "label": "ISOBACKSLASH"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 12.25, "y": 3, "w": 1, "label": "JPBACKSLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, - {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"} - ] - }, - - "LAYOUT_66_ansi": { - "layout": [ - {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Win", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4} - ] - }, - - "LAYOUT_66_iso": { - "layout": [ - {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3, "w":1}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"\u2191", "x":14.5, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Ctrl", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13.5, "y":4}, {"label":"\u2193", "x":14.5, "y":4}, {"label":"\u2192", "x":15.5, "y":4} - ] - } - } -} diff --git a/keyboards/clueboard/66/keymaps/66_ansi/keymap.c b/keyboards/clueboard/66/keymaps/66_ansi/keymap.c deleted file mode 100644 index 73c809ded6f..00000000000 --- a/keyboards/clueboard/66/keymaps/66_ansi/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT_66_ansi( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT_66_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU, - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP, - _______,_______,_______, _______, _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT_66_ansi( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, - _______,_______,_______, RGB_MOD, _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/66_ansi/readme.md b/keyboards/clueboard/66/keymaps/66_ansi/readme.md deleted file mode 100644 index eee81c0c2d1..00000000000 --- a/keyboards/clueboard/66/keymaps/66_ansi/readme.md +++ /dev/null @@ -1,9 +0,0 @@ -# Basic Clueboard 66% Hotswap ANSI Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. - -This uses `LAYOUT_66_ansi`, which is compatable with the `66_ansi` community -layout. diff --git a/keyboards/clueboard/66/keymaps/66_iso/keymap.c b/keyboards/clueboard/66/keymaps/66_iso/keymap.c deleted file mode 100644 index ff27acf5cde..00000000000 --- a/keyboards/clueboard/66/keymaps/66_iso/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT_66_iso( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_PGDN, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT_66_iso( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU, - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______, KC_VOLD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP, - _______,_______,_______, _______, _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT_66_iso( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, - _______,_______,_______, RGB_MOD, _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/66_iso/readme.md b/keyboards/clueboard/66/keymaps/66_iso/readme.md deleted file mode 100644 index 6d895b0eba7..00000000000 --- a/keyboards/clueboard/66/keymaps/66_iso/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Default Clueboard 66% ISO Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66/keymaps/bloodlvst/config.h b/keyboards/clueboard/66/keymaps/bloodlvst/config.h deleted file mode 100644 index 60c6ad4a12c..00000000000 --- a/keyboards/clueboard/66/keymaps/bloodlvst/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define DISABLE_SPACE_CADET_ROLLOVER diff --git a/keyboards/clueboard/66/keymaps/bloodlvst/keymap.c b/keyboards/clueboard/66/keymaps/bloodlvst/keymap.c deleted file mode 100644 index 7c7faba9ce9..00000000000 --- a/keyboards/clueboard/66/keymaps/bloodlvst/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_DEL, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSPO, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSPC, KC_UP, - KC_LCTL, KC_LGUI, MO(_FL), KC_LALT, KC_BSPC,KC_SPC, KC_RALT, KC_APP, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END, KC_VOLU, - _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, KC_MUTE, KC_VOLD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, KC_PSCR, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MPLY, - _______, KC_MYCM, MO(_FL), _______, _______,_______, _______, KC_CALC, MO(_FL), _______, KC_MPRV, KC_MSTP, KC_MNXT), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - KC_PWR, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, RGB_MOD, - _______, _______, _______,_______,_______,_______,_______,_______,_______,RGB_HUD, RGB_HUI, _______, _______, _______, KC_WAKE, - _______, _______, MO(_FL), _______, RGB_SAD,RGB_SAI, _______, _______, MO(_FL), _______, _______, KC_SLEP, _______), -}; diff --git a/keyboards/clueboard/66/keymaps/bloodlvst/readme.md b/keyboards/clueboard/66/keymaps/bloodlvst/readme.md deleted file mode 100644 index ee287ca476f..00000000000 --- a/keyboards/clueboard/66/keymaps/bloodlvst/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -``` - ___ _____ _ _ _ __ __ _ __ -|__ \ / ____| | | | | | / / / /(_) / / - ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / - |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / - |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ - (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) -``` - -![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png) - -# Default Clueboard Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66/keymaps/bloodlvst/rules.mk b/keyboards/clueboard/66/keymaps/bloodlvst/rules.mk deleted file mode 100644 index b1c2f32f6ae..00000000000 --- a/keyboards/clueboard/66/keymaps/bloodlvst/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -EXTRAKEY_ENABLE = yes -COMMAND_ENABLE = no diff --git a/keyboards/clueboard/66/keymaps/caps_fn/keymap.c b/keyboards/clueboard/66/keymaps/caps_fn/keymap.c deleted file mode 100644 index fc0c56d9a77..00000000000 --- a/keyboards/clueboard/66/keymaps/caps_fn/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/caps_fn/readme.md b/keyboards/clueboard/66/keymaps/caps_fn/readme.md deleted file mode 100644 index 71d1246c078..00000000000 --- a/keyboards/clueboard/66/keymaps/caps_fn/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# Caps Fn Layout - -This is the default layout except that Caps Lock acts like Caps Lock when -tapped but Fn when held. diff --git a/keyboards/clueboard/66/keymaps/colemak/keymap.c b/keyboards/clueboard/66/keymaps/colemak/keymap.c deleted file mode 100644 index 4479556b65b..00000000000 --- a/keyboards/clueboard/66/keymaps/colemak/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT,KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_CAPS, KC_VOLU, - _______, _______, _______,_______,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END, _______, _______, _______, KC_VOLD, - KC_DEL, _______, MO(_CL),_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______,_______, _______,_______, _______, _______, MO(_FL), _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - BL_STEP, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/default/keymap.c b/keyboards/clueboard/66/keymaps/default/keymap.c deleted file mode 100644 index 95283db886c..00000000000 --- a/keyboards/clueboard/66/keymaps/default/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, - KC_LCTL,KC_LGUI,KC_LALT,KC_MHEN, KC_SPC, KC_SPC, KC_HENK,KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, KC_VOLU, - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, - _______,_______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, - _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/default/readme.md b/keyboards/clueboard/66/keymaps/default/readme.md deleted file mode 100644 index b1cdcbe4e26..00000000000 --- a/keyboards/clueboard/66/keymaps/default/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Default Clueboard 66% Universal Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66/keymaps/jokrik/keymap.c b/keyboards/clueboard/66/keymaps/jokrik/keymap.c deleted file mode 100644 index 9c6997c34e2..00000000000 --- a/keyboards/clueboard/66/keymaps/jokrik/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PAUS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC,KC_SPC, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, MO(_FL), _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, MO(_FL), _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/jokrik/readme.md b/keyboards/clueboard/66/keymaps/jokrik/readme.md deleted file mode 100644 index a845e65f1b9..00000000000 --- a/keyboards/clueboard/66/keymaps/jokrik/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# Jokrik's Clueboard Layout - diff --git a/keyboards/clueboard/66/keymaps/mac_optimized/keymap.c b/keyboards/clueboard/66/keymaps/mac_optimized/keymap.c deleted file mode 100644 index 30e772900ee..00000000000 --- a/keyboards/clueboard/66/keymaps/mac_optimized/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, - KC_LCTL,KC_LALT,KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK,KC_RGUI,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, KC_VOLU, - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MRWD,KC_MPLY,KC_MFFD,_______,KC_MUTE, KC_VOLD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, - _______,_______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, - _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/mac_optimized/readme.md b/keyboards/clueboard/66/keymaps/mac_optimized/readme.md deleted file mode 100644 index db7a87d443b..00000000000 --- a/keyboards/clueboard/66/keymaps/mac_optimized/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# Default Clueboard Layout for Mac - -This is the default Clueboard layout with Alt and GUI switched to match Mac -conventions. diff --git a/keyboards/clueboard/66/keymaps/magicmonty/config.h b/keyboards/clueboard/66/keymaps/magicmonty/config.h deleted file mode 100644 index 65853f6b0c1..00000000000 --- a/keyboards/clueboard/66/keymaps/magicmonty/config.h +++ /dev/null @@ -1,35 +0,0 @@ -#pragma once - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on - #define MIDI_BASIC -*/ - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -#define MIDI_TONE_KEYCODE_OCTAVES 2 - -/* - Setting the modified Space Cadet Parens for German layout - - Default is - #define LSPO_KEY KC_9 - #define RSPC_KEY KC_0 -*/ -#define LSPO_KEY KC_8 -#define RSPC_KEY KC_9 -#define PERMISSIVE_HOLD diff --git a/keyboards/clueboard/66/keymaps/magicmonty/keymap.c b/keyboards/clueboard/66/keymaps/magicmonty/keymap.c deleted file mode 100644 index cd9ae01188e..00000000000 --- a/keyboards/clueboard/66/keymaps/magicmonty/keymap.c +++ /dev/null @@ -1,226 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 // BASE Layer -#define _FL 1 // Function Layer -#define _ME 2 // Media Layer -#define _CL 3 // Control Layer -#define _ML 4 // Mouse Layer -#if defined(MIDI_ENABLE) - #define _MI 5 // MIDI Layer - #define TO_MIDI TO(_MI) -#else - #define TO_MIDI _______ -#endif - -// go back to base layer -#define TO_BASE TO(_BL) - -// switch to function layer while helde -#define MO_FUNC MO(_FL) - -// switch to media layer while held -#define MEDIA MO(_ME) - -// switch to Control layer while helde -#define MO_CTL MO(_CL) - -// switch to mouse layer if held, else space -#define L_MOUSE LT(_ML, KC_SPC) - -// Function key when held, else ESC -#define ESC_FUN LT(_FL, KC_ESC) - -// Hyper (CTRL+ALT+SHIFT+SUPER) when held, TAB when tapped -#define HPR_TAB ALL_T(KC_TAB) - -// CTRL when held, ESC when tapped -#define CTL_ESC CTL_T(KC_ESC) - -// Reset RGB mode to layer signalling -#define RGB_RST F(0) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) */ - [_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, KC_INS, - HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - ESC_FUN, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT,_______, L_MOUSE, L_MOUSE, _______, KC_RALT, KC_RCTL, MO_FUNC, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function layer */ - [_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, BL_STEP, - _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO_CTL, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, _______, - KC_LSPO, _______, _______, _______, _______, _______, _______, _______, MEDIA, _______, _______, TO_MIDI, _______, KC_RSPC, KC_PGUP, - _______, _______, _______, _______, _______, _______, _______, _______, _______, MO_FUNC, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _ME: Media layer */ - [_ME] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, MEDIA, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT), - - /* Keymap _CL: Control layer */ - [_CL] = LAYOUT( - _______, RGB_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO_CTL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______, _______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), - - /* Keymap _ML: Mouse layer */ - [_ML] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, KC_BTN2, KC_BTN3, KC_BTN1, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_U, - _______, _______, _______, _______, L_MOUSE, L_MOUSE, _______, KC_BTN1, KC_BTN3, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R), - -#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) - /* Keymap _MI: MIDI layer (Advanced)*/ - [_MI] = LAYOUT( - TO_BASE,MI_VEL_1,MI_VEL_2,MI_VEL_3,MI_VEL_4,MI_VEL_5,MI_VEL_6,MI_VEL_7,MI_VEL_8,MI_VEL_9,MI_VEL_10, MI_CHD, MI_CHU, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, MI_Cs, MI_Ds, XXXXXXX, MI_Fs, MI_Gs, MI_As, XXXXXXX, MI_Cs_1, MI_Ds_1, XXXXXXX, MI_Fs_1, XXXXXXX, XXXXXXX, - MI_MOD, MI_C, MI_D, MI_E, MI_F, MI_G, MI_A, MI_B, MI_C_1, MI_D_1, MI_E_1, MI_F_1, MI_G_1, XXXXXXX, - MI_SUS, XXXXXXX, MI_OCTD, MI_OCTU,MI_MODSD,MI_MODSU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRNSD,MI_TRNSU,MI_TRNS_0, MI_SUS, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX, MI_ALLOFF, MI_ALLOFF, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX), -#elif defined(MIDI_ENABLE) && defined(MIDI_BASIC) - /* Keymap _MI: MIDI layer (Basic)*/ - [_MI] = LAYOUT( - TO_BASE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, MI_ON, MI_OFF, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX), -#endif -}; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - case 0: - if (record->event.pressed) { - rgblight_mode(1); - rgblight_sethsv(206, 255, 255); - } - } -} - -enum layer_id { - LAYER_BASE, - LAYER_FUNCTION, - LAYER_MEDIA, - LAYER_CONTROL, - LAYER_MOUSE, -#if defined(MIDI_ENABLE) - LAYER_MIDI -#endif -}; - -void clueboard_set_led(uint8_t id, uint8_t val) { - switch (id) { - case LAYER_BASE: - rgblight_sethsv_noeeprom(190, 255, val); - break; - case LAYER_FUNCTION: - rgblight_sethsv_noeeprom(46, 255, val); - break; - case LAYER_MEDIA: - rgblight_sethsv_noeeprom(86, 255, val); - break; - case LAYER_CONTROL: - rgblight_sethsv_noeeprom(346, 255, val); - break; - case LAYER_MOUSE: - rgblight_sethsv_noeeprom(206, 255, val); - break; -#if defined(MIDI_ENABLE) - case LAYER_MIDI: - rgblight_sethsv_noeeprom(316, 255, val); - break; -#endif - } -}; - -const uint16_t oct_hues[10] = { - 0, - 30, - 60, - 90, - 120, - 150, - 180, - 210, - 240, - 300 -}; - -#define MAX_OCT 9 - -void clueboard_set_midi_led(uint8_t base_oct, uint8_t val) -{ - uint8_t sat = 255; - - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - sethsv(oct_hues[base_oct], sat, val, (LED_TYPE *)&led[i]); - } - - uint8_t next_oct = base_oct < MAX_OCT ? base_oct + 1 : base_oct; - - uint16_t next_hue = base_oct < MAX_OCT ? oct_hues[next_oct] : 0; - uint8_t next_val = base_oct < MAX_OCT ? val : 0; - uint8_t next_sat = base_oct < MAX_OCT ? sat : 0; - - - for (uint8_t i = 0; i < 3; i++) { - sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]); - } - - for (uint8_t i = 11; i < 14; i++) { - sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]); - } - - rgblight_set(); -} - -void matrix_scan_user(void) { - rgblight_config_t rgblight_config; - rgblight_config.raw = eeconfig_read_rgblight(); - - if (!rgblight_config.enable || rgblight_config.mode != 1) { return; } - - uint32_t layer = layer_state; - uint8_t val = rgblight_config.val; - - if (layer & (1<<_FL)) { - if (layer & (1<<_ME)) { - clueboard_set_led(LAYER_MEDIA, val); - } else if (layer & (1<<_CL)) { - clueboard_set_led(LAYER_CONTROL, val); - } else { - clueboard_set_led(LAYER_FUNCTION, val); - } - } else if (layer & (1<<_ML)) { - clueboard_set_led(LAYER_MOUSE, val); -#if defined(MIDI_ENABLE) - } else if (layer & (1<<_MI)) { - clueboard_set_midi_led(midi_config.octave, val); -#endif - } else { - clueboard_set_led(LAYER_BASE, val); - } -}; diff --git a/keyboards/clueboard/66/keymaps/magicmonty/readme.md b/keyboards/clueboard/66/keymaps/magicmonty/readme.md deleted file mode 100644 index 20d1c6fa3fc..00000000000 --- a/keyboards/clueboard/66/keymaps/magicmonty/readme.md +++ /dev/null @@ -1,53 +0,0 @@ -# Layout of @magicmonty - -[Keyboard Layout Editor File] - -![Clueboard Layout Image](http://i.imgur.com/eEwjLEj.png) -My ClueBoard Layout as of 2017/06/30 - - -This layout is a combination of the `mouse_keys` and the `win_optimized` layouts. -This layout is optimized for an ISO layout. -The CapsLock is disabled and works as ESC when tapped and FN when held. -The `TAB` key works as `TAB` when tapped, and [HYPER] (`CTRL` + `ALT` + `SHIFT` + `CMD`) when held. - -## Mouse Layer - -When you hold down the spacebar the arrow keys will move your mouse cursor. -You can click using the 3 mods to the left of the arrow keys, or the 3 keys under your primary fingers on the home row. -The Left, Down, Up and Right for the mouse movement are also VIM-Like on the HJKL keys - -## MIDI layer - -The MIDI layer is permanently enabled by pressing `FN` + `/`. -It can be exited with the `ESC`-Key - -## Space Cadet(ish) Shift Parentheses - -If the function layer is active, the `SHIFT`-Keys are configured like the [Space Cadet Shift Parentheses] -as opened (left `SHIFT`) and closed (right `SHIFT`) parentheses if tapped and `SHIFT` if held. - -## Media layer - -The media layer with Volume/Play controls, can be accessed via `FN` + `m` - -## Control layer - -The control layer is accessed via `FN` + `s`. -Here one can control the behavior of the RGB underlight. -`FN` + `s` + `1` resets the RGB underlight to the Layer signalling mode - -## Layer signalling through underlight - -The different layers are signalled throug setting of the underlight: - -- Base layer: Light Blue -- Function layer: Yellow -- Media layer: Green -- Mouse layer: Blue -- Control layer: Red -- Midi layer: Purple - -[HYPER]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ -[Space Cadet Shift Parentheses]: http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses -[Keyboard Layout Editor File]: http://www.keyboard-layout-editor.com/#/gists/f869b8789242a712e0f46eabbd550056 diff --git a/keyboards/clueboard/66/keymaps/magicmonty/rules.mk b/keyboards/clueboard/66/keymaps/magicmonty/rules.mk deleted file mode 100644 index 46222e2d342..00000000000 --- a/keyboards/clueboard/66/keymaps/magicmonty/rules.mk +++ /dev/null @@ -1,10 +0,0 @@ - -MOUSEKEY_ENABLE = yes -EXTRAKEY_ENABLE = yes -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality - -MIDI_ENABLE = yes - -# if MIDI_ENABLE is set to yes, then CONSOLE_ENABLE has to be disabled, because of the firmware size -CONSOLE_ENABLE = no -COMMAND_ENABLE = no diff --git a/keyboards/clueboard/66/keymaps/manofinterests/keymap.c b/keyboards/clueboard/66/keymaps/manofinterests/keymap.c deleted file mode 100644 index e71419980d6..00000000000 --- a/keyboards/clueboard/66/keymaps/manofinterests/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, RGB_VAI, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, RGB_VAD, - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RO, KC_RSFT, KC_UP, - KC_LCTL,KC_LGUI,KC_LALT,KC_MHEN, KC_SPC, KC_SPC, KC_HENK,KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, KC_VOLU, - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, - _______,_______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, - _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/manofinterests/readme.md b/keyboards/clueboard/66/keymaps/manofinterests/readme.md deleted file mode 100644 index 019131aeb19..00000000000 --- a/keyboards/clueboard/66/keymaps/manofinterests/readme.md +++ /dev/null @@ -1,8 +0,0 @@ -![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png) - -# Default Clueboard Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66/keymaps/maximised/keymap.c b/keyboards/clueboard/66/keymaps/maximised/keymap.c deleted file mode 100644 index c2e05a5a277..00000000000 --- a/keyboards/clueboard/66/keymaps/maximised/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, - KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, - _______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Reset/Underlight layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/maximised/readme.md b/keyboards/clueboard/66/keymaps/maximised/readme.md deleted file mode 100644 index b8d54a30939..00000000000 --- a/keyboards/clueboard/66/keymaps/maximised/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# Maximised Clueboard Layout - -This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac. diff --git a/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c b/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c deleted file mode 100644 index be5634f103f..00000000000 --- a/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 -#define _ML 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), - - /* Keymap _ML: Mouse layer - */ - [_ML] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, - _______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, - _______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R), -}; diff --git a/keyboards/clueboard/66/keymaps/mouse_keys/readme.md b/keyboards/clueboard/66/keymaps/mouse_keys/readme.md deleted file mode 100644 index de883e8940b..00000000000 --- a/keyboards/clueboard/66/keymaps/mouse_keys/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# MouseKeys Layout - -This layout adds a mouse layer. When you hold down the spacebar the arrow keys -will move your mouse cursor. You can click using the 3 mods to the left of the -arrow keys, or the 3 keys under your primary fingers on the home row. diff --git a/keyboards/clueboard/66/keymaps/mouse_keys/rules.mk b/keyboards/clueboard/66/keymaps/mouse_keys/rules.mk deleted file mode 100644 index 6c605daecf5..00000000000 --- a/keyboards/clueboard/66/keymaps/mouse_keys/rules.mk +++ /dev/null @@ -1 +0,0 @@ -MOUSEKEY_ENABLE = yes diff --git a/keyboards/clueboard/66/keymaps/mrscooty/keymap.c b/keyboards/clueboard/66/keymaps/mrscooty/keymap.c deleted file mode 100644 index 302649c9234..00000000000 --- a/keyboards/clueboard/66/keymaps/mrscooty/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, - MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI,KC_LALT,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_PGUP, - _______, RGB_TOG, KC_MPRV, KC_MPLY, KC_MNXT,_______,_______,KC_HOME,KC_UP, KC_END, _______, _______, _______, KC_PSCR, KC_PGDN, - _______, RGB_VAI, KC_MUTE, KC_VOLD, KC_VOLU,_______,_______,KC_LEFT,KC_DOWN,KC_RIGHT, _______, _______, _______, _______, - _______, RGB_VAD, _______, _______, _______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______, _______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI) -}; - - /* Keymap _CL: Control layer - -[_CL] = LAYOUT( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,_______,RGB_TOG, RGB_VAI, - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_SAI, - _______,_______,_______,_______, RGB_MOD, RGB_MOD, _______,_______,_______,_______,RGB_HUD,RGB_SAD,RGB_HUI), -};*/ diff --git a/keyboards/clueboard/66/keymaps/mrscooty/readme.md b/keyboards/clueboard/66/keymaps/mrscooty/readme.md deleted file mode 100644 index 69cdb816c50..00000000000 --- a/keyboards/clueboard/66/keymaps/mrscooty/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Mr Scooty's Clueboard Layout - -My personal layout for everyday typing and coding. -I have a most of my media keys on the function layer as well as a second set of arrows as IJKL which you switch between by holding the normal CAPS key. - - -#### Base Layer -![Base Layout Image] (https://imgur.com/HWdi36y) - -#### Fn Layer -![Fn Layout Image] (https://imgur.com/IPa8gFg) - - - -Both layers (https://imgur.com/a/dAwXq) diff --git a/keyboards/clueboard/66/keymaps/mrscooty/rules.mk b/keyboards/clueboard/66/keymaps/mrscooty/rules.mk deleted file mode 100644 index ba997f86967..00000000000 --- a/keyboards/clueboard/66/keymaps/mrscooty/rules.mk +++ /dev/null @@ -1,4 +0,0 @@ - -MOUSEKEY_ENABLE = yes -EXTRAKEY_ENABLE = yes - diff --git a/keyboards/clueboard/66/keymaps/muzfuz/keymap.c b/keyboards/clueboard/66/keymaps/muzfuz/keymap.c deleted file mode 100644 index d4af3548315..00000000000 --- a/keyboards/clueboard/66/keymaps/muzfuz/keymap.c +++ /dev/null @@ -1,74 +0,0 @@ -#include QMK_KEYBOARD_H - -// Helpful defines -#define ESC_CTL CTL_T(KC_ESCAPE) // Tap for Esc, hold for Ctrl -#define _FL_KCF LT(1,KC_F) -#define _FL_KCJ LT(1,KC_J) -#define _AL_KCA LT(2,KC_A) -#define CMD_ENT LGUI(LSFT(KC_ENT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _AL 2 -#define _CL 3 - -enum custom_keycodes { - HASHRKT = SAFE_RANGE, - CLNEQLS, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ - [_BL] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, HASHRKT, LGUI(KC_C), - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, LGUI(KC_V), - ESC_CTL, _AL_KCA, KC_S, KC_D, _FL_KCF, KC_G, KC_H, _FL_KCJ, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_LGUI, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_RSFT, KC_UP, - CMD_ENT, KC_LCTL, KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_CL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ - [_FL] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_VOLU, - _______, HASHRKT, _______, KC_LCBR, KC_RCBR, _______, _______, KC_UNDS, KC_PLUS, KC_PIPE, _______, _______, _______, KC_MUTE, KC_VOLD, - _______, CLNEQLS, _______, KC_LBRC, KC_RBRC, _______, _______, KC_MINS, KC_EQL, KC_BSLS, KC_TILD, KC_GRV, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _FL: Function Layer - */ - [_AL] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), - - /* Keymap _CL: Control layer - */ - [_CL] = LAYOUT( - BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_VAD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______, _______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - case HASHRKT: - if (record->event.pressed) { - SEND_STRING("=>"); - } - break; - case CLNEQLS: - if (record->event.pressed) { - SEND_STRING(":="); - } - break; - } - return true; -} diff --git a/keyboards/clueboard/66/keymaps/muzfuz/readme.md b/keyboards/clueboard/66/keymaps/muzfuz/readme.md deleted file mode 100644 index ce23a8a99c0..00000000000 --- a/keyboards/clueboard/66/keymaps/muzfuz/readme.md +++ /dev/null @@ -1,8 +0,0 @@ -# muzfuz Clueboard layout - -```shell -make clueboard/66/rev3:muzfuz -dfu-programmer atmega32u4 erase --force && \ -dfu-programmer atmega32u4 flash .build/clueboard_66_rev3_muzfuz.hex && \ -dfu-programmer atmega32u4 reset -``` diff --git a/keyboards/clueboard/66/keymaps/serubin/keymap.c b/keyboards/clueboard/66/keymaps/serubin/keymap.c deleted file mode 100644 index e77417c3c29..00000000000 --- a/keyboards/clueboard/66/keymaps/serubin/keymap.c +++ /dev/null @@ -1,49 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _ME 2 -#define _CL 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RGUI, MO(_FL), MO(_ME), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_HOME, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, KC_PSCR, KC_END, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, MO(_FL), MO(_ME), KC_HOME, KC_PGDN, KC_END), - -/* Keymap _FL: Function Layer - */ -[_ME] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_VOLD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______ , _______, _______, - _______, _______, _______, _______, _______,_______, _______, _______, MO(_FL), MO(_ME), KC_MPRV, KC_MPLY, KC_MNXT), - - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, MO(_FL), _______, RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/serubin/readme.md b/keyboards/clueboard/66/keymaps/serubin/readme.md deleted file mode 100644 index 78eef53523c..00000000000 --- a/keyboards/clueboard/66/keymaps/serubin/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# Serubin's Clueboard Layout - -This is the layout based on the clueboard default, modified for development on Mac, PC, and Windows. This layout also handles media and volume keys on all the previously listed platforms. Most importantly, Capslock has been replaced by a dual function Esc/Ctrl key. This is particularly handy for use in Vim. - -#### Base Layer -![Base Layout Image](http://i.imgur.com/qL78n1y.png) - -#### Fn Layer -![Fn Layout Image](http://i.imgur.com/QuwxePw.png) - -#### Media Layer -![Media Layer Image](http://i.imgur.com/oOfWXMf.png) - - diff --git a/keyboards/clueboard/66/keymaps/serubin/rules.mk b/keyboards/clueboard/66/keymaps/serubin/rules.mk deleted file mode 100644 index ba997f86967..00000000000 --- a/keyboards/clueboard/66/keymaps/serubin/rules.mk +++ /dev/null @@ -1,4 +0,0 @@ - -MOUSEKEY_ENABLE = yes -EXTRAKEY_ENABLE = yes - diff --git a/keyboards/clueboard/66/keymaps/shift_fn/keymap.c b/keyboards/clueboard/66/keymaps/shift_fn/keymap.c deleted file mode 100644 index 8556f90803a..00000000000 --- a/keyboards/clueboard/66/keymaps/shift_fn/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - MO(_FL), KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_GRV), KC_DEL, BL_STEP, - S(KC_TAB), S(KC_Q), S(KC_W),S(KC_E),S(KC_R),S(KC_T), S(KC_Y), S(KC_U),S(KC_I),S(KC_O), S(KC_P), S(KC_LBRC),S(KC_RBRC),S(KC_BSLS), S(KC_PGDN), - S(KC_LCTL),S(KC_A), MO(_CL),S(KC_D),S(KC_F),S(KC_G), S(KC_H), S(KC_J),S(KC_K),S(KC_L), S(KC_SCLN),S(KC_QUOT),S(KC_NUHS),S(KC_ENT), - MO(_FL), S(KC_NUBS),S(KC_Z),S(KC_X),S(KC_C),S(KC_V), S(KC_B), S(KC_N),S(KC_M),S(KC_COMM),S(KC_DOT), S(KC_SLSH),S(KC_RO), KC_RSFT, KC_PGUP, - KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, S(KC_SPC),S(KC_SPC), KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/shift_fn/readme.md b/keyboards/clueboard/66/keymaps/shift_fn/readme.md deleted file mode 100644 index d68c5b05321..00000000000 --- a/keyboards/clueboard/66/keymaps/shift_fn/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Shift Fn Clueboard 66% Layout - -This is an experimental layout. It makes the left shift key a dual roll key. -For most keys it acts as a shift key, but for some keys it activates an -alternate function instead. Primarily I use this to access the F-keys under -the number rows. diff --git a/keyboards/clueboard/66/keymaps/smt/keymap.c b/keyboards/clueboard/66/keymaps/smt/keymap.c deleted file mode 100644 index 89fc495919e..00000000000 --- a/keyboards/clueboard/66/keymaps/smt/keymap.c +++ /dev/null @@ -1,132 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _FL 3 -#define _CL 4 - -enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK -}; - -// Custom macros -#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt) -#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _QWERTY: Base Layer (Default Layer) - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| Q| W| E| R| T| Y| U| I| O| P| [| ]| BS| |PgD| - * |-----------------------------------------------------------| `---' - * |CtlEsc| A| S| D| F| G| H| J| K| L| ;| '| | Ent| - * |--------------------------------------------------------------. - * |Shift| | Z| X| C| V| B| N| M| ,| .| /|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, - HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, - CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, MO(_FL), KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC,KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _COLEMAK: Base Layer - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| Q| W| F| P| G| J| L| U| Y| ;| [| ]| BS| |PgD| - * |-----------------------------------------------------------| `---' - * |CtlEsc| A| R| S| T| D| H| N| E| I| O| '| | Ent| - * |--------------------------------------------------------------. - * |Shift| | Z| X| C| V| B| K| M| ,| .| /|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PGUP, - HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, - CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, MO(_FL), KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC,KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _DVORAK: Base Layer - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| \| `| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| '| ,| .| P| Y| F| G| C| R| L| /| =| BS| |PgD| - * |-----------------------------------------------------------| `---' - * |CtlEsc| A| O| E| U| I| D| H| T| N| S| -| | Ent| - * |--------------------------------------------------------------. - * |Shift| | ;| Q| J| K| X| B| M| W| V| Z|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_PGUP, - HPR_TAB, KC_QUOT, KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_PGDN, - CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, - KC_LSFT, XXXXXXX, KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, MO(_FL), KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC,KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, KC_DEL, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,QWERTY, COLEMAK,DVORAK, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - } - return true; -} diff --git a/keyboards/clueboard/66/keymaps/smt/readme.md b/keyboards/clueboard/66/keymaps/smt/readme.md deleted file mode 100644 index 7fc0f0248d1..00000000000 --- a/keyboards/clueboard/66/keymaps/smt/readme.md +++ /dev/null @@ -1,21 +0,0 @@ -# smt Clueboard Layout (HHKB variant) - -![Clueboard Layout Image](http://i.imgur.com/Ll5gGte.png) - -This is smt's HHKB variant layout, based on the default layout that comes -flashed on every Clueboard. The primary differences from the default are: - -- The Backspace key is moved down into the traditional `\` position -- `\` and `` ` `` are assigned to the "split-backspace" positions -- The right Shift is split to allow for a Fn key to its right -- The modifiers on the right side now mirror the left side (`Alt`/`Super`/`Ctrl`) - -For the most part, it's a straightforward and easy to follow layout. There -are a few special keys: - -- The Esc key sends `Esc` when tapped, `` ` `` when `Alt`/`Super`/`Ctrl`/`Fn` is held, or `~` when `Shift` is held -- The Tab key sends `Tab` when tapped, or `Super+Ctrl+Alt+Shift` (a.k.a. [Hyper]) when held -- The key traditionally in the Caps-Lock position has been re-mapped to send `Esc` when tapped, or `Ctrl` when held -- The left Shift key sends `Enter` when tapped, or `Shift` when held - -[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ diff --git a/keyboards/clueboard/66/keymaps/tetris/keymap.c b/keyboards/clueboard/66/keymaps/tetris/keymap.c deleted file mode 100644 index ef3abd66720..00000000000 --- a/keyboards/clueboard/66/keymaps/tetris/keymap.c +++ /dev/null @@ -1,208 +0,0 @@ -#include QMK_KEYBOARD_H -#include "tetris_text.h" - -// Helpful defines -#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,F(1) ,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -/* This is a list of user defined functions. F(N) corresponds to item N - of this list. - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(0), // Calls action_function() - [1] = ACTION_FUNCTION(1) -}; - -static uint8_t tetris_key_presses = 0; -static uint16_t tetris_timer = 0; -static uint8_t tetris_running = 0; -static int tetris_keypress = 0; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t mods_pressed; - static bool mod_flag; - - switch (id) { - case 0: - // clueboard specific hook to make escape quite tetris - if (tetris_running) { - tetris_running = 0; - return; - } - - /* Handle the combined Grave/Esc key - */ - mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed - - if (record->event.pressed) { - /* The key is being pressed. - */ - if (mods_pressed) { - mod_flag = true; - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - /* The key is being released. - */ - if (mod_flag) { - mod_flag = false; - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - case 1: - if (record->event.pressed) { - tetris_running = 1; - tetris_timer = 0; - tetris_keypress = 0; - // set randomness using total number of key presses - tetris_start(tetris_key_presses); - } - break; - } -} - -/* - * Set up tetris - */ - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - tetris_key_presses++; - } - - if (tetris_running && record->event.pressed) { - tetris_keypress = 0; - switch (keycode) { - case KC_UP: tetris_keypress = 1; break; - case KC_LEFT: tetris_keypress = 2; break; - case KC_DOWN: tetris_keypress = 3; break; - case KC_RIGHT: tetris_keypress = 4; break; - // Make ESC stop tetris (on keyboards other than clueboard) - // case KC_ESC: tetris_running = 0; return false; - } - if (tetris_keypress != 0) { - return false; - } - } - - return true; -} - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - if (tetris_running) { - tetris_timer++; - if (tetris_timer > 1000) { - // every 1000 times this is run is about 100 ms. - if (!tetris_tick(100)) { - // game over - tetris_running = 0; - } - tetris_timer = 0; - } - } -} - -void send_keycode(uint16_t keycode) { - register_code(keycode); - unregister_code(keycode); -} - -void send_keycode_shift(uint16_t keycode) { - register_code(KC_LSFT); - register_code(keycode); - unregister_code(keycode); - unregister_code(KC_LSFT); -} - -void tetris_send_up(void) { - send_keycode(KC_UP); -} -void tetris_send_left(void) { - send_keycode(KC_LEFT); -} -void tetris_send_down(void) { - send_keycode(KC_DOWN); -} -void tetris_send_right(void) { - send_keycode(KC_RGHT); -} -void tetris_send_backspace(void) { - send_keycode(KC_BSPC); -} -void tetris_send_delete(void) { - send_keycode(KC_DEL); -} - -void tetris_send_string(const char *s) { - for (int i = 0; s[i] != 0; i++) { - if (s[i] >= 'a' && s[i] <= 'z') { - send_keycode(KC_A + (s[i] - 'a')); - } else if (s[i] >= 'A' && s[i] <= 'Z') { - send_keycode_shift(KC_A + (s[i] - 'A')); - } else if (s[i] >= '1' && s[i] <= '9') { - send_keycode(KC_1 + (s[i] - '1')); - } else { - switch (s[i]) { - case ' ': send_keycode(KC_SPACE); break; - case '.': send_keycode(KC_DOT); break; - case '0': send_keycode(KC_0); break; - } - } - } -} - -void tetris_send_newline(void) { - send_keycode(KC_ENT); -} - -int tetris_get_keypress(void) { - int out = tetris_keypress; - tetris_keypress = 0; - return out; -} diff --git a/keyboards/clueboard/66/keymaps/tetris/readme.md b/keyboards/clueboard/66/keymaps/tetris/readme.md deleted file mode 100644 index 20e97fb19f5..00000000000 --- a/keyboards/clueboard/66/keymaps/tetris/readme.md +++ /dev/null @@ -1,33 +0,0 @@ -Default layout but with a tetris game -===================================== -Tetris works by outputting key-presses to make ascii-art in a regular text editor. -It reads key presses to rotate and move the bricks like a regular tetris game. - -Example -======= -![tetris](https://raw.githubusercontent.com/danamlund/meckb_tetris/master/tetris.gif) - -Usage -===== -1) Open a default text editor -2) Press the tetris button (Fn + t) -3) Play tetris - -It makes ascii-art by sending keycodes: left, right, up, down, qwerty characters, and numbers. - -Problems -======== -Drawing ascii-art is too slow to make a pleasant playing experience. -While drawing ascii-art, the keyboard does not record key-presses, so its pretty unresponsive. - -Adds 5000 bytes to the hex file. - -Implement in other keyboards -============================ - - Copy-paste the files tetris_text.c and tetrix_text.h to your keymap folder. - - Add/update your-keyboard/your-keymap/Makefile to include ``SRC = tetris_text.c`` - - Copy-paste the tetris-related code from this keymap.c to yours. - - Set a key to trigger F(1) to start tetris mode. - - Its also a good idea to set a key to stop tetris, here its escape. - -You can find a simple tetris keyboard definition at diff --git a/keyboards/clueboard/66/keymaps/tetris/rules.mk b/keyboards/clueboard/66/keymaps/tetris/rules.mk deleted file mode 100644 index 4613531296b..00000000000 --- a/keyboards/clueboard/66/keymaps/tetris/rules.mk +++ /dev/null @@ -1 +0,0 @@ -SRC = tetris_text.c diff --git a/keyboards/clueboard/66/keymaps/tetris/tetris_text.c b/keyboards/clueboard/66/keymaps/tetris/tetris_text.c deleted file mode 100644 index 1376ead0050..00000000000 --- a/keyboards/clueboard/66/keymaps/tetris/tetris_text.c +++ /dev/null @@ -1,505 +0,0 @@ -/* Copyright 2017 Dan Amlund Thomsen - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include -#include -#include -#include - -#include "tetris_text.h" - -static char empty_piece[7][7] = { { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 }, - { 0, 0, 0, 0, 0, 0, 0 } }; - -static char temp_piece[7][7]; - -static int curx = 0; -static int cury = 0; - -static void clear_piece(char piece[7][7]) { - for (int y = 0; y < 7; y++) { - for (int x = 0; x < 7; x++) { - piece[x][y] = 0; - } - } -} - -static void copy_piece_from_to(char from[7][7], char to[7][7]) { - for (int y = 0; y < 7; y++) { - for (int x = 0; x < 7; x++) { - to[x][y] = from[x][y]; - } - } -} - -static void rotate_piece(char piece[7][7]) { - // transpose - for (int y = 0; y < 7; y++) { - for (int x = y + 1; x < 7; x++) { - char tmp = piece[y][x]; - piece[y][x] = piece[x][y]; - piece[x][y] = tmp; - } - } - - // reverse rows - for (int y = 0; y < 7; y++) { - for (int x = 0; x < 3; x++) { - char tmp = piece[y][6 - x]; - piece[y][6 - x] = piece[y][x]; - piece[y][x] = tmp; - } - } -} - -static char get_shape_char(int shape) { - switch (shape) { - case 0: return 'I'; - case 1: return 'J'; - case 2: return 'L'; - case 3: return 'O'; - case 4: return 'S'; - case 5: return 'T'; - case 6: return 'Z'; - } - return 'Q'; -} - -static void set_piece(char piece[7][7], int shape, int rotation) { - clear_piece(piece); - switch (shape) { - case 0: - if (rotation % 2 == 0) { - // xxXx - piece[3][1] = 1; - piece[3][2] = 1; - piece[3][3] = 1; - piece[3][4] = 1; - } else { - // x - // x - // X - // x - piece[1][3] = 1; - piece[2][3] = 1; - piece[3][3] = 1; - piece[4][3] = 1; - } - break; - case 1: - // xXx - // x - piece[3][2] = 1; - piece[3][3] = 1; - piece[3][4] = 1; - piece[4][4] = 1; - for (int i = 0; i < rotation; i++) { - rotate_piece(piece); - } - break; - case 2: - // xXx - // x - piece[3][2] = 1; - piece[3][3] = 1; - piece[3][4] = 1; - piece[4][2] = 1; - for (int i = 0; i < rotation; i++) { - rotate_piece(piece); - } - break; - case 3: - // xX - // xx - piece[3][2] = 1; - piece[3][3] = 1; - piece[4][2] = 1; - piece[4][3] = 1; - break; - case 4: - if (rotation % 2 == 0) { - // xX - // xx - piece[3][2] = 1; - piece[3][3] = 1; - piece[4][3] = 1; - piece[4][4] = 1; - } else { - // x - // xX - // x - piece[2][3] = 1; - piece[3][2] = 1; - piece[3][3] = 1; - piece[4][2] = 1; - } - break; - case 5: - // xXx - // x - piece[3][2] = 1; - piece[3][3] = 1; - piece[3][4] = 1; - piece[4][3] = 1; - for (int i = 0; i < rotation; i++) { - rotate_piece(piece); - } - break; - case 6: - if (rotation % 2 == 0) { - // Xx - // xx - piece[3][3] = 1; - piece[3][4] = 1; - piece[4][2] = 1; - piece[4][3] = 1; - } else { - // x - // Xx - // x - piece[2][3] = 1; - piece[3][3] = 1; - piece[3][4] = 1; - piece[4][4] = 1; - } - break; - } -} - -static void send_deletes(int deletes) { - for (int i = 0; i < deletes; i++) { - tetris_send_delete(); - } -} - -static void send_backspaces(int backspaces) { - for (int i = 0; i < backspaces; i++) { - tetris_send_backspace(); - curx--; - } -} - -static void send_goto_xy(int x, int y) { - while (curx < x) { - tetris_send_right(); - curx++; - } - while (curx > x) { - tetris_send_left(); - curx--; - } - while (cury < y) { - tetris_send_down(); - cury++; - } - while (cury > y) { - tetris_send_up(); - cury--; - } -} - -static void draw_row(char c, const char oldrow[7], const char newrow[7], int x, int y) { - char str[2] = { c, 0 }; - char row_is_del[7] = { 0 }; - int first = -1; - int last = -1; - for (int px = 0; px < 7; px++) { - if (oldrow[px] && !newrow[px]) { - row_is_del[px] = 1; - } - if (newrow[px] || oldrow[px]) { - if (first == -1) first = px; - last = px; - } - } - - if (first >= 0) { - if (curx > x + last + 1) { - send_goto_xy(x + last + 1, cury); - } - if (curx < x + first) { - send_goto_xy(x + first, cury); - } - send_goto_xy(curx, y); - send_deletes((x + last + 1) - curx); - send_backspaces(curx - (x + first)); - for (int i = first; i <= last; i++) { - if (row_is_del[i]) { - tetris_send_string("."); - } else { - tetris_send_string(str); - } - curx++; - } - } -} - -static void move_piece_from_to(char from[7][7], char to[7][7], int xadd, int yadd) { - for (int y = 0; y < 7; y++) { - for (int x = 0; x < 7; x++) { - if (x + xadd >= 0 && x + xadd < 7 && y + yadd >= 0 && y + yadd < 7) { - to[y][x] = from[y + yadd][x + xadd]; - } else { - to[y][x] = 0; - } - } - } -} - -static void draw_piece(char c, int x, int y, char oldpiece[7][7], char piece[7][7]) { - for (int py = 0; py < 7; py++) { - draw_row(c, oldpiece[py], piece[py], x, y + py); - } -} - -static void draw_piece_moved(char c, int x, int y, char piece[7][7], int oldxadd, int oldyadd) { - move_piece_from_to(piece, temp_piece, oldxadd, oldyadd); - draw_piece(c, x, y, temp_piece, piece); -} - -static int is_piece_hitting(char board[20][10], char piece[7][7], int x, int y) { - for (int py = 0; py < 7; py++) { - for (int px = 0; px < 7; px++) { - if (piece[py][px] && - (px + x >= 10 || px + x < 0 - || py + y >= 20 || py + y < 0 - || board[py + y][px + x])) { - return 1; - } - } - } - return 0; -} - -static void add_piece_to_board(char piece[7][7], char board[20][10], int x, int y) { - for (int py = 0; py < 7; py++) { - for (int px = 0; px < 7; px++) { - if (piece[py][px]) { - board[py + y][px + x] = piece[py][px]; - } - } - } -} - -static void draw_board_line(void) { - //send_string("l l"); - tetris_send_string("l..........l"); - tetris_send_newline(); -} -static void init(void) { - for (int i = 0; i < 20; i++) { - draw_board_line(); - } - tetris_send_string("doooooooooob"); - curx = 12; - cury = 20; -} - -static int get_piece_min_y(char piece[7][7]) { - for (int y = 0; y < 7; y++) { - for (int x = 0; x < 7; x++) { - if (piece[y][x]) - return y; - } - } - return 0; -} - -static int clear_lines(char board[20][10]) { - int cleared_lines = 0; - for (int y = 19; y >= 0; y--) { - char isfull = 1; - for (int x = 0; x < 10; x++) { - if (!board[y][x]) { - isfull = 0; - } - } - if (isfull) { - // delete clear line - send_goto_xy(12, y); - send_backspaces(12); // delete line contents - // delete newline - tetris_send_backspace(); - cury--; - curx = 12; - cleared_lines++; - } else { - if (cleared_lines > 0) { - // move cleared lines down on board - for (int x = 0; x < 10; x++) { - board[y + cleared_lines][x] = board[y][x]; - } - } - } - } - // clear cleared top lines - for (int y = 0; y < cleared_lines; y++) { - for (int x = 0; x < 10; x++) { - board[y][x] = 0; - } - } - if (cleared_lines > 0) { - send_goto_xy(0, 0); - for (int i = 0; i < cleared_lines; i++) { - draw_board_line(); - curx = 0; - cury++; - } - } - return cleared_lines; -} - -static uint8_t myrandom(uint8_t seed) { - uint8_t out = seed >> 1; - if (seed & 1) { - out = out ^ 0xB8; - } - return out; -} - -static char piece[7][7]; -static char board[20][10]; -static uint8_t r; -static int score; -static int x; -static int y; -static int shape; -static int rotation; -static int time; -static int next_down; -static int down_delay; -static int first_run; -static int game_over; - -void tetris_start(uint8_t seed) { - for (int y = 0; y < 20; y++) { - for (int x = 0; x < 10; x++) { - board[y][x] = 0; - } - } - - clear_piece(piece); - - init(); - - game_over = 0; - - r = seed; - score = 0; - - copy_piece_from_to(empty_piece, piece); - x = 0; - y = 0; - shape = 0; - rotation = 0; - time = 0; - next_down = 0; - down_delay = -1; - first_run = 1; -} - -int tetris_tick(int ms_since_previous_tick) { - if (game_over) { - return 0; - } - - time += ms_since_previous_tick; - - if (first_run || time > next_down) { - if (first_run || is_piece_hitting(board, piece, x, y + 1)) { - first_run = 0; - add_piece_to_board(piece, board, x, y); - - score += clear_lines(board); - - down_delay = 500 - score * 10; - if (down_delay < 100) { - down_delay = 100; - } - - rotation = 0; - shape = r % 7; - r = myrandom(r); - set_piece(piece, shape, rotation); - - x = 1; - y = - get_piece_min_y(piece); - draw_piece_moved(get_shape_char(shape), 1 + x, y, piece, 0, 0); - - if (is_piece_hitting(board, piece, x, y)) { - game_over = 1; - send_goto_xy(12, 10); - tetris_send_string(" game over"); - tetris_send_down(); - tetris_send_string(" score "); - char tmp[10]; - sprintf(tmp, "%d", score); - tetris_send_string(tmp); - return 0; - } - } else { - y++; - draw_piece_moved(get_shape_char(shape), 1 + x, y, piece, 0, +1); - } - next_down = time + down_delay; - } else { - - switch (tetris_get_keypress()) { - case 1: { // up - int oldrotation = rotation; - rotation = (rotation + 1) % 4; - copy_piece_from_to(piece, temp_piece); - set_piece(piece, shape, rotation); - if (is_piece_hitting(board, piece, x, y)) { - rotation = oldrotation; - set_piece(piece, shape, rotation); - } else { - draw_piece(get_shape_char(shape), 1 + x, y, temp_piece, piece); - } - break; - } - case 2: // left - if (!is_piece_hitting(board, piece, x - 1, y)) { - x--; - draw_piece_moved(get_shape_char(shape), 1 + x, y, piece, -1, 0); - } - break; - case 3: {// down - int starty = y; - while (!is_piece_hitting(board, piece, x, y + 1)) { - y++; - } - - draw_piece(get_shape_char(shape), x + 1, starty, piece, empty_piece); - draw_piece(get_shape_char(shape), x + 1, y, empty_piece, piece); - - next_down = time + down_delay; - break; - } - case 4: // right - if (!is_piece_hitting(board, piece, x + 1, y)) { - x++; - draw_piece_moved(get_shape_char(shape), 1 + x, y, piece, 1, 0); - } - break; - } - } - return 1; -} diff --git a/keyboards/clueboard/66/keymaps/tetris/tetris_text.h b/keyboards/clueboard/66/keymaps/tetris/tetris_text.h deleted file mode 100644 index 25b4177e0b9..00000000000 --- a/keyboards/clueboard/66/keymaps/tetris/tetris_text.h +++ /dev/null @@ -1,45 +0,0 @@ -/* Copyright 2017 Dan Amlund Thomsen - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef TETRIS_TEXT_H -#define TETRIS_TEXT_H - -//// to implement -void tetris_send_up(void); -void tetris_send_left(void); -void tetris_send_down(void); -void tetris_send_right(void); - -void tetris_send_backspace(void); -void tetris_send_delete(void); - -void tetris_send_string(const char *s); - -void tetris_send_newline(void); - -// return = meaning -// 0 = no keys pressed -// 1 = up -// 2 = left -// 3 = down -// 4 = right -int tetris_get_keypress(void); - -//// to call -void tetris_start(uint8_t seed); -// returns 0 when game is over -int tetris_tick(int ms_since_previous_tick); - -#endif diff --git a/keyboards/clueboard/66/keymaps/unix_optimized/keymap.c b/keyboards/clueboard/66/keymaps/unix_optimized/keymap.c deleted file mode 100644 index 823959ee0dc..00000000000 --- a/keyboards/clueboard/66/keymaps/unix_optimized/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/unix_optimized/readme.md b/keyboards/clueboard/66/keymaps/unix_optimized/readme.md deleted file mode 100644 index 79c7daef842..00000000000 --- a/keyboards/clueboard/66/keymaps/unix_optimized/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# Default Clueboard 66% Layout - -This is the default layout except that Caps Lock has been changed to Control -and Insert and Delete have been put into the Fn layer. diff --git a/keyboards/clueboard/66/keymaps/win_optimized/keymap.c b/keyboards/clueboard/66/keymaps/win_optimized/keymap.c deleted file mode 100644 index 2c5cb863986..00000000000 --- a/keyboards/clueboard/66/keymaps/win_optimized/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, - _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, - _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, - MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, - _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; diff --git a/keyboards/clueboard/66/keymaps/win_optimized/readme.md b/keyboards/clueboard/66/keymaps/win_optimized/readme.md deleted file mode 100644 index d79603268d2..00000000000 --- a/keyboards/clueboard/66/keymaps/win_optimized/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Default Clueboard 66% Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66/keymaps/xyverz/config.h b/keyboards/clueboard/66/keymaps/xyverz/config.h deleted file mode 100644 index 979cbf57687..00000000000 --- a/keyboards/clueboard/66/keymaps/xyverz/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#define TAPPING_TERM 600 // ms diff --git a/keyboards/clueboard/66/keymaps/xyverz/keymap.c b/keyboards/clueboard/66/keymaps/xyverz/keymap.c deleted file mode 100644 index 3341ced918a..00000000000 --- a/keyboards/clueboard/66/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,139 +0,0 @@ -// Xyverz' keymap. -// It's based on the default keymap, but Dvorak! - -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _FL 3 -#define _CL 4 - -enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK -}; - -// Useful defines -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) -#define FN_CAPS LT(_FL, KC_CAPS) // Tap for Caps Lock, Hold for Function Layer - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _QWERTY: Base Layer (Default Layer) - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgD| - * |-----------------------------------------------------------| `---' - * |FnCaps| A| S| D| F| G| H| J| K| L| ;| '| | Ent| - * |--------------------------------------------------------------. - * |Shift| | Z| X| C| V| B| N| M| ,| .| /|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ - -[_QWERTY] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _COLEMAK: Base Layer - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| Q| W| F| P| G| J| L| U| Y| ;| [| ]| BS| |PgD| - * |-----------------------------------------------------------| `---' - * |FnCaps| A| R| S| T| D| H| N| E| I| O| '| | Ent| - * |--------------------------------------------------------------. - * |Shift| | Z| X| C| V| B| K| M| ,| .| /|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _DVORAK: Base Layer - * ,-----------------------------------------------------------. ,---. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| \| `| |PgU| - * |-----------------------------------------------------------| |---| - * |HpTab| '| ,| .| P| Y| F| G| C| R| L| /| =| BS| |PgD| - * |-----------------------------------------------------------| `---' - * |FnCaps| A| O| E| U| I| D| H| T| N| S| -| | Ent| - * |--------------------------------------------------------------. - * |Shift| | ;| Q| J| K| X| B| M| W| V| Z|Shift| Fn| Up| - * |------------------------------------------------------------------. - * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT ( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ - _______, _______, MO(_CL), _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT ( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ - _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, \ - _______, _______, MO(_CL), _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, \ - _______, _______, _______, _______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), -}; - - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - } - return true; -} diff --git a/keyboards/clueboard/66/keymaps/xyverz/rules.mk b/keyboards/clueboard/66/keymaps/xyverz/rules.mk deleted file mode 100644 index 6fa110a7b66..00000000000 --- a/keyboards/clueboard/66/keymaps/xyverz/rules.mk +++ /dev/null @@ -1,46 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Build Options -# change to "no" to disable the options, or define them in the makefile.mk in -# the appropriate keymap folder that will get included automatically -# -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. - diff --git a/keyboards/clueboard/66/readme.md b/keyboards/clueboard/66/readme.md deleted file mode 100644 index 094cc219e9c..00000000000 --- a/keyboards/clueboard/66/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# Clueboard 66% - -![Clueboard](https://i.imgur.com/hLePwJu.jpg) - -A fully customizable 66% keyboard. - -* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: Clueboard 66% PCB - * rev1 (PCB Version 1.0) - * rev2 (PCB Versions 2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6) - * rev3 (PCB Versions 2.7, 2.8, 2.9) -* Hardware Availability: [clueboard.co](https://clueboard.co/) - -Make example for this keyboard (after setting up your build environment): - - make clueboard/66/rev3:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/clueboard/66/rev1/config.h b/keyboards/clueboard/66/rev1/config.h deleted file mode 100644 index 9db64fbd498..00000000000 --- a/keyboards/clueboard/66/rev1/config.h +++ /dev/null @@ -1,60 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2301 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard -#define DESCRIPTION QMK keyboard firmware for Clueboard - -/* key matrix size - */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* ROWS: Top to bottom, COLS: Left to right - */ -#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } -#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* Underlight configuration - */ -#define RGB_DI_PIN B2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/clueboard/66/rev1/rev1.c b/keyboards/clueboard/66/rev1/rev1.c deleted file mode 100644 index 90fc6956c96..00000000000 --- a/keyboards/clueboard/66/rev1/rev1.c +++ /dev/null @@ -1,17 +0,0 @@ -#include "rev1.h" - -void led_init_ports() { - // * Set our LED pins as output - DDRF |= (1<<0); -} - -void led_set_kb(uint8_t usb_led) { - DDRF |= (1<<0); - if (usb_led & (1< -#include "backlight.h" -#include "print.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1< -#include "backlight.h" -#include "print.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -} - - -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -void backlight_init_ports(void) { - print("init_backlight_pin()\n"); - // Set our LED pins as output - DDRD |= (1<<6); // Esc - DDRB |= (1<<7); // Page Up - DDRD |= (1<<4); // Arrows - - // Set our LED pins low - PORTD &= ~(1<<6); // Esc - PORTB &= ~(1<<7); // Page Up - PORTD &= ~(1<<4); // Arrows -} - -void backlight_set(uint8_t level) { - if ( level == 0 ) { - // Turn off light - PORTD |= (1<<6); // Esc - PORTB |= (1<<7); // Page Up - PORTD |= (1<<4); // Arrows - } else { - // Turn on light - PORTD &= ~(1<<6); // Esc - PORTB &= ~(1<<7); // Page Up - PORTD &= ~(1<<4); // Arrows - } -} - -void led_init_ports() { - // * Set our LED pins as output - DDRB |= (1<<4); -} - -void led_set_kb(uint8_t usb_led) { - DDRB |= (1<<4); - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard 66% HotSwap -#define DESCRIPTION QMK keyboard firmware for Clueboard 66% - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -//#define NO_DEBUG -//#define NO_PRINT -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/clueboard/66_hotswap/gen1/chconf.h b/keyboards/clueboard/66_hotswap/gen1/chconf.h deleted file mode 100644 index 1d9f12ff1f8..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h deleted file mode 100644 index ea01a078b24..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2391 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard - -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 } -#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 } -#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 } -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -// #define DEBOUNCE 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - - /* Backlight configuration - */ -#define BACKLIGHT_LEVELS 10 - -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 0b1110100 AD <-> GND -// 0b1110111 AD <-> VCC -// 0b1110101 AD <-> SCL -// 0b1110110 AD <-> SDA -#define LED_DRIVER_ADDR_1 0b1110100 -#define I2C1_BANK GPIOB -#define I2C1_SCL 8 -#define I2C1_SDA 9 - -#define LED_DRIVER_COUNT 1 -#define LED_DRIVER_LED_COUNT 71 diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.c b/keyboards/clueboard/66_hotswap/gen1/gen1.c deleted file mode 100644 index c70f223756c..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.c +++ /dev/null @@ -1,186 +0,0 @@ -/* Copyright 2017 Clueboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "gen1.h" -#include "is31fl3731-simple.h" - -void matrix_init_kb(void) { -} - -void matrix_scan_kb(void) { -} - -#ifdef LED_MATRIX_ENABLE -const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = { -/* Refer to IS31 manual for these locations - * driver - * | LED address - * | | */ - {0, C1_1}, // k00 KC_GESC - {0, C1_2}, // k01 KC_1 - {0, C1_3}, // k02 KC_2 - {0, C1_4}, // k03 KC_3 - {0, C1_5}, // k04 KC_4 - {0, C1_6}, // k05 KC_5 - {0, C1_7}, // k06 KC_6 - {0, C1_8}, // k07 KC_7 - {0, C1_9}, // k50 KC_8 - {0, C1_10}, // k51 KC_9 - {0, C1_11}, // k52 KC_0 - {0, C1_12}, // k53 KC_MINS - {0, C1_13}, // k54 KC_EQL - {0, C1_14}, // k55 KC_BSPC - {0, C1_15}, // k57 KC_PGUP - {0, C2_1}, // k10 KC_TAB - {0, C2_2}, // k11 KC_Q - {0, C2_3}, // k12 KC_W - {0, C2_4}, // k13 KC_E - {0, C2_5}, // k14 KC_R - {0, C2_6}, // k15 KC_T - {0, C2_7}, // k16 KC_Y - {0, C2_8}, // k17 KC_U - {0, C2_9}, // k60 KC_I - {0, C2_10}, // k61 KC_O - {0, C2_11}, // k62 KC_P - {0, C2_12}, // k63 KC_LBRC - {0, C2_13}, // k64 KC_RBRC - {0, C2_14}, // k65 KC_BSLS - {0, C2_15}, // k67 KC_PGDN - {0, C3_1}, // k20 KC_CAPS - {0, C3_2}, // k21 KC_A - {0, C3_3}, // k22 KC_S - {0, C3_4}, // k23 KC_D - {0, C3_5}, // k24 KC_F - {0, C3_6}, // k25 KC_G - {0, C3_7}, // k26 KC_H - {0, C3_8}, // k27 KC_J - {0, C3_9}, // k70 KC_K - {0, C3_10}, // k71 KC_L - {0, C3_11}, // k72 KC_SCLN - {0, C3_12}, // k73 KC_QUOT - {0, C3_14}, // k75 KC_ENT - {0, C4_1}, // k30 KC_LSFT - {0, C4_3}, // k32 KC_Z - {0, C4_4}, // k33 KC_X - {0, C4_5}, // k34 KC_C - {0, C4_6}, // k35 KC_V - {0, C4_7}, // k36 KC_B - {0, C4_8}, // k37 KC_N - {0, C4_9}, // k80 KC_M - {0, C4_10}, // k81 KC_COMM - {0, C4_11}, // k82 KC_DOT - {0, C4_12}, // k83 KC_SLSH - {0, C4_13}, // k85 KC_RSFT - {0, C4_14}, // k86 KC_UP - {0, C5_1}, // k40 KC_LCTL - {0, C5_2}, // k41 KC_LGUI - {0, C5_3}, // k42 KC_LALT - {0, C5_4}, // Unassociated between LALT and SPACE_2.75 - {0, C5_5}, // k45 KC_SPC SPACE_2.75 - {0, C5_6}, // k45 KC_SPC SPACE_6.75 - {0, C5_7}, // k46 KC_SPC SPACE_2.25 - {0, C5_8}, // Unassociated between SPACE_2.25 and SPACE_1.25 - {0, C5_9}, // k90 KC_RGUI - {0, C5_10}, // k92 KC_RALT - {0, C5_11}, // k93 MO(_FL) - {0, C5_12}, // k94 KC_RCTL - {0, C5_13}, // k95 KC_LEFT - {0, C5_14}, // k96 KC_DOWN - {0, C5_15} // k97 KC_RGHT -}; - -const led_matrix g_leds[LED_DRIVER_LED_COUNT] = { - - /*{row | col << 4} - | LED_ROW_COL(row, col) - | | modifier - | | | */ - {{0|(1<<4)}, {0, 0}, 1}, // k00 KC_GESC - {{0|(2<<4)}, {14.45, 0}, 0}, // k01 KC_1 - {{0|(3<<4)}, {28.9, 0}, 0}, // k02 KC_2 - {{0|(4<<4)}, {43.35, 0}, 0}, // k03 KC_3 - {{0|(5<<4)}, {57.8, 0}, 0}, // k04 KC_4 - {{0|(6<<4)}, {72.25, 0}, 0}, // k05 KC_5 - {{0|(7<<4)}, {86.7, 0}, 0}, // k06 KC_6 - {{0|(8<<4)}, {101.2, 0}, 0}, // k07 KC_7 - {{0|(9<<4)}, {115.6, 0}, 0}, // k50 KC_8 - {{0|(10<<4)}, {130, 0}, 0}, // k51 KC_9 - {{0|(11<<4)}, {144.5, 0}, 0}, // k52 KC_0 - {{0|(12<<4)}, {159, 0}, 0}, // k53 KC_MINS - {{0|(13<<4)}, {173.4, 0}, 0}, // k54 KC_EQL - {{0|(14<<4)}, {195.1, 0}, 1}, // k55 KC_BSPC - {{0|(15<<4)}, {224, 0}, 1}, // k57 KC_PGUP - - {{1|(0<<4)}, {3.6125, 16}, 1}, // k10 KC_TAB - {{1|(1<<4)}, {21.675, 16}, 0}, // k11 KC_Q - {{1|(2<<4)}, {36.125, 16}, 0}, // k12 KC_W - {{1|(3<<4)}, {50.575, 16}, 0}, // k13 KC_E - {{1|(4<<4)}, {65.025, 16}, 0}, // k14 KC_R - {{1|(5<<4)}, {79.475, 16}, 0}, // k15 KC_T - {{1|(6<<4)}, {93.925, 16}, 0}, // k16 KC_Y - {{1|(7<<4)}, {108.375, 16}, 0}, // k17 KC_U - {{1|(8<<4)}, {122.825, 16}, 0}, // k60 KC_I - {{1|(9<<4)}, {137.275, 16}, 0}, // k61 KC_O - {{1|(10<<4)}, {151.725, 16}, 0}, // k62 KC_P - {{1|(11<<4)}, {166.175, 16}, 0}, // k63 KC_LBRC - {{1|(12<<4)}, {180.625, 16}, 0}, // k64 KC_RBRC - {{1|(13<<4)}, {198.6875, 16}, 1}, // k65 KC_BSLS - {{1|(14<<4)}, {224, 16}, 1}, // k67 KC_PGDN - - {{2|(0<<4)}, {5.41875, 32}, 1}, // k20 KC_CAPS - {{2|(1<<4)}, {25.2875, 32}, 0}, // k21 KC_A - {{2|(2<<4)}, {39.7375, 32}, 0}, // k22 KC_S - {{2|(3<<4)}, {54.1875, 32}, 0}, // k23 KC_D - {{2|(4<<4)}, {68.6375, 32}, 0}, // k24 KC_F - {{2|(5<<4)}, {83.0875, 32}, 0}, // k25 KC_G - {{2|(6<<4)}, {97.5375, 32}, 0}, // k26 KC_H - {{2|(7<<4)}, {111.9875, 32}, 0}, // k27 KC_J - {{2|(8<<4)}, {126.4375, 32}, 0}, // k70 KC_K - {{2|(9<<4)}, {140.8875, 32}, 0}, // k71 KC_L - {{2|(10<<4)}, {155.3375, 32}, 0}, // k72 KC_SCLN - {{2|(11<<4)}, {169.7875, 32}, 0}, // k73 KC_QUOT - {{2|(12<<4)}, {184.2375, 32}, 1}, // k75 KC_ENT - - {{3|(0<<4)}, {16.25625, 48}, 1}, // k30 KC_LSFT - {{3|(1<<4)}, {32.5125, 48}, 0}, // k32 KC_Z - {{3|(2<<4)}, {46.9625, 48}, 0}, // k33 KC_X - {{3|(3<<4)}, {61.4125, 48}, 0}, // k34 KC_C - {{3|(4<<4)}, {75.8625, 48}, 0}, // k35 KC_V - {{3|(5<<4)}, {90.3125, 48}, 0}, // k36 KC_B - {{3|(6<<4)}, {104.7625, 48}, 0}, // k37 KC_N - {{3|(7<<4)}, {119.2125, 48}, 0}, // k80 KC_M - {{3|(8<<4)}, {133.6625, 48}, 0}, // k81 KC_COMM - {{3|(9<<4)}, {148.1125, 48}, 0}, // k82 KC_DOT - {{3|(10<<4)}, {162.5625, 48}, 0}, // k83 KC_SLSH - {{3|(11<<4)}, {187.85, 48}, 1}, // k85 KC_RSFT - {{3|(12<<4)}, {209.525, 48}, 1}, // k86 KC_UP - - {{4|(0<<4)}, {9.03125, 64}, 1}, // k40 KC_LCTL - {{4|(1<<4)}, {27.09375, 64}, 1}, // k41 KC_LGUI - {{4|(2<<4)}, {45.15625, 64}, 1}, // k42 KC_LALT - {{4|(3<<4)}, {59.45, 64}, 1}, // Unassociated between LALT and SPACE_2.75 - {{4|(4<<4)}, {73.9, 64}, 1}, // k45 KC_SPC SPACE_2.75 - {{4|(5<<4)}, {88.35, 64}, 1}, // k45 KC_SPC SPACE_6.25 - {{4|(6<<4)}, {102.8, 64}, 1}, // k46 KC_SPC SPACE_2.25 - {{4|(7<<4)}, {117.40625, 64}, 1}, // Unassociated between SPACE_2.25 and SPACE_2.75 - {{4|(8<<4)}, {135.46875, 64}, 1}, // k90 KC_RGUI - {{4|(9<<4)}, {153.53125, 64}, 1}, // k92 KC_RALT - {{4|(10<<4)}, {167.98125, 64}, 1}, // k93 MO(_FL) - {{4|(11<<4)}, {186.04375, 64}, 1}, // k94 KC_RCTL - {{4|(12<<4)}, {195.075, 64}, 1}, // k95 KC_LEFT - {{4|(13<<4)}, {209.525, 64}, 1}, // k96 KC_DOWN - {{4|(14<<4)}, {224, 64}, 1} // k97 KC_RGHT -}; -#endif diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.h b/keyboards/clueboard/66_hotswap/gen1/gen1.h deleted file mode 100644 index 05adf49831e..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.h +++ /dev/null @@ -1,89 +0,0 @@ -/* Copyright 2017 Clueboard - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once -#include "quantum.h" - -/* - * These are shortcuts to help you work with the various layout options. If your - * keymap works with one of the LAYOUT_...() macros you are encouraged to use that - * and to contribute your keymap to the corresponding layout in - * `qmk_firmware/layouts/community`. - */ - -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75| - * |--------------------------------------------------------------. - * | 30 | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85 |86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95|96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | - * |--------------------------------------------------------------. - * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} diff --git a/keyboards/clueboard/66_hotswap/gen1/halconf.h b/keyboards/clueboard/66_hotswap/gen1/halconf.h deleted file mode 100644 index eda293c49b8..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json deleted file mode 100644 index bab110f3d50..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/info.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "layouts": { - "LAYOUT": { - "layout": [{"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"}] - }, - - "LAYOUT_66_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}] - } - } -} diff --git a/keyboards/clueboard/66_hotswap/gen1/led.c b/keyboards/clueboard/66_hotswap/gen1/led.c deleted file mode 100644 index efbf532022a..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/led.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2017 skully - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . -*/ - -#include "hal.h" -#include "backlight.h" -#include "led.h" -#include "printf.h" diff --git a/keyboards/clueboard/66_hotswap/gen1/matrix.c b/keyboards/clueboard/66_hotswap/gen1/matrix.c deleted file mode 100644 index c3e59b56460..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/matrix.c +++ /dev/null @@ -1,160 +0,0 @@ -#include -#include -#include -#include "hal.h" -#include "timer.h" -#include "wait.h" -#include "printf.h" -#include "backlight.h" -#include "matrix.h" -#include "action.h" -#include "keycode.h" -#include - -/* - * #define MATRIX_ROW_PINS { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 } - * #define MATRIX_COL_PINS { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 } - */ -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_COLS]; -static bool debouncing = false; -static uint16_t debouncing_time = 0; - -__attribute__ ((weak)) -void matrix_init_user(void) {} - -__attribute__ ((weak)) -void matrix_scan_user(void) {} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -void matrix_init(void) { - printf("matrix init\n"); - //debug_matrix = true; - - // actual matrix setup - palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 4, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(GPIOB, 11, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN); - - memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - // actual matrix - for (int col = 0; col < MATRIX_COLS; col++) { - matrix_row_t data = 0; - - // strobe col { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 } - switch (col) { - case 0: palSetPad(GPIOB, 10); break; - case 1: palSetPad(GPIOB, 2); break; - case 2: palSetPad(GPIOB, 1); break; - case 3: palSetPad(GPIOB, 0); break; - case 4: palSetPad(GPIOA, 7); break; - case 5: palSetPad(GPIOB, 4); break; - case 6: palSetPad(GPIOB, 3); break; - case 7: palSetPad(GPIOB, 7); break; - } - - // need wait to settle pin state - wait_us(20); - - // read row data { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 } - data = ( - (palReadPad(GPIOB, 11) << 0 ) | - (palReadPad(GPIOA, 6) << 1 ) | - (palReadPad(GPIOA, 3) << 2 ) | - (palReadPad(GPIOA, 2) << 3 ) | - (palReadPad(GPIOA, 1) << 4 ) | - (palReadPad(GPIOB, 5) << 5 ) | - (palReadPad(GPIOB, 6) << 6 ) | - (palReadPad(GPIOC, 15) << 7 ) | - (palReadPad(GPIOC, 14) << 8 ) | - (palReadPad(GPIOC, 13) << 9 ) - ); - - // unstrobe col { B11, B10, B2, B1, A7, B0 } - switch (col) { - case 0: palClearPad(GPIOB, 10); break; - case 1: palClearPad(GPIOB, 2); break; - case 2: palClearPad(GPIOB, 1); break; - case 3: palClearPad(GPIOB, 0); break; - case 4: palClearPad(GPIOA, 7); break; - case 5: palClearPad(GPIOB, 4); break; - case 6: palClearPad(GPIOB, 3); break; - case 7: palClearPad(GPIOB, 7); break; - } - - if (matrix_debouncing[col] != data) { - matrix_debouncing[col] = data; - debouncing = true; - debouncing_time = timer_read(); - } - } - - if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { - for (int row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0; - for (int col = 0; col < MATRIX_COLS; col++) { - matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); - } - } - debouncing = false; - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_on(uint8_t row, uint8_t col) { - return (matrix[row] & (1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = GENERIC_STM32_F303XC - -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 - -# LED Configuration -LED_MATRIX_ENABLE = IS31FL3731 - -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = yes -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -#CUSTOM_MATRIX = yes # Custom matrix file -AUDIO_ENABLE = yes -# SERIAL_LINK_ENABLE = yes diff --git a/keyboards/clueboard/66_hotswap/info.json b/keyboards/clueboard/66_hotswap/info.json deleted file mode 100644 index 04a748764c4..00000000000 --- a/keyboards/clueboard/66_hotswap/info.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "keyboard_name": "Clueboard 66% HotSwap", - "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [ - {"x": 0, "y": 0, "label": "GRAVE"}, {"x": 1, "y": 0, "label": "1"}, {"x": 2, "y": 0, "label": "2"}, {"x": 3, "y": 0, "label": "3"}, {"x": 4, "y": 0, "label": "4"}, {"x": 5, "y": 0, "label": "5"}, {"x": 6, "y": 0, "label": "6"}, {"x": 7, "y": 0, "label": "7"}, {"x": 8, "y": 0, "label": "8"}, {"x": 9, "y": 0, "label": "9"}, {"x": 10, "y": 0, "label": "0"}, {"x": 11, "y": 0, "label": "DASH"}, {"x": 12, "y": 0, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 2, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "label": "PAGEUP"}, - {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "label": "Q"}, {"x": 2.5, "y": 1, "label": "W"}, {"x": 3.5, "y": 1, "label": "E"}, {"x": 4.5, "y": 1, "label": "R"}, {"x": 5.5, "y": 1, "label": "T"}, {"x": 6.5, "y": 1, "label": "Y"}, {"x": 7.5, "y": 1, "label": "U"}, {"x": 8.5, "y": 1, "label": "I"}, {"x": 9.5, "y": 1, "label": "O"}, {"x": 10.5, "y": 1, "label": "P"}, {"x": 11.5, "y": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "label": "PAGEDOWN"}, - {"x": 0, "y": 2, "w": 1.75, "label": "CAPS LOCK"}, {"x": 1.75, "y": 2, "label": "A"}, {"x": 2.75, "y": 2, "label": "S"}, {"x": 3.75, "y": 2, "label": "D"}, {"x": 4.75, "y": 2, "label": "F"}, {"x": 5.75, "y": 2, "label": "G"}, {"x": 6.75, "y": 2, "label": "H"}, {"x": 7.75, "y": 2, "label": "J"}, {"x": 8.75, "y": 2, "label": "K"}, {"x": 9.75, "y": 2, "label": "L"}, {"x": 10.75, "y": 2, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "label": "QUOTE"}, {"x": 12.75, "y": 2, "w": 2.25, "label": "ENTER"}, - {"x": 0, "y": 3, "w": 2.25, "label": "LSHIFT"}, {"x": 2.25, "y": 3, "label": "Z"}, {"x": 3.25, "y": 3, "label": "X"}, {"x": 4.25, "y": 3, "label": "C"}, {"x": 5.25, "y": 3, "label": "V"}, {"x": 6.25, "y": 3, "label": "B"}, {"x": 7.25, "y": 3, "label": "N"}, {"x": 8.25, "y": 3, "label": "M"}, {"x": 9.25, "y": 3, "label": "COMMA"}, {"x": 10.25, "y": 3, "label": "PERIOD"}, {"x": 11.25, "y": 3, "label": "SLASH"}, {"x": 12.25, "y": 3, "w": 2.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "label": "UP"}, - {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1.25, "label": "LGUI"}, {"x": 2.5, "y": 4, "w": 1.25, "label": "LALT"}, {"x": 3.75, "y": 4, "w": 2.75, "label": "SPACE1"}, {"x": 6.5, "y": 4, "w": 2.25, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "RGUI"}, {"x": 10, "y": 4, "w": 1.25, "label": "RALT"}, {"x": 11.25, "y": 4, "label": "FN"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "RCTRL"}, {"x": 13.5, "y": 4, "label": "LEFT"}, {"x": 14.5, "y": 4, "label": "DOWN"}, {"x": 15.5, "y": 4, "label": "RIGHT"} - ] - }, - "LAYOUT_66_ansi": { - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "BACKSPACE", "x": 13, "y": 0, "w": 2}, {"label": "PAGEUP", "x": 15.5, "y": 0}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, {"label": "PAGEDOWN", "x": 15.5, "y": 1}, - {"label": "CAPS LOCK", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": "SEMICOLON", "x": 10.75, "y": 2}, {"label": "QUOTE", "x": 11.75, "y": 2}, {"label": "ENTER", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "LSHIFT", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "COMMA", "x": 9.25, "y": 3}, {"label": "PERIOD", "x": 10.25, "y": 3}, {"label": "SLASH", "x": 11.25, "y": 3}, {"label": "RSHIFT", "x": 12.25, "y": 3, "w": 2.25}, {"label": "UP", "x": 14.5, "y": 3}, - {"label": "LCTRL", "x": 0, "y": 4, "w": 1.25}, {"label": "LGUI", "x": 1.25, "y": 4, "w": 1.25}, {"label": "LALT", "x": 2.5, "y": 4, "w": 1.25}, {"label": "SPACE", "x": 3.75, "y": 4, "w": 6.25}, {"label": "RALT", "x": 10, "y": 4, "w": 1.25}, {"label": "RGUI", "x": 11.25, "y": 4}, {"label": "FN", "x": 12.25, "y": 4, "w": 1.25}, {"label": "LEFT", "x": 13.5, "y": 4}, {"label": "DOWN", "x": 14.5, "y": 4}, {"label": "RIGHT", "x": 15.5, "y": 4} - ] - } - } -} diff --git a/keyboards/clueboard/66_hotswap/keymaps/66_ansi/keymap.c b/keyboards/clueboard/66_hotswap/keymaps/66_ansi/keymap.c deleted file mode 100644 index 224362fe549..00000000000 --- a/keyboards/clueboard/66_hotswap/keymaps/66_ansi/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT_66_ansi( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT_66_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, \ - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP, \ - _______,_______,_______, _______, _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT_66_ansi( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI, \ - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ - _______,_______,_______, RGB_MOD, _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; diff --git a/keyboards/clueboard/66_hotswap/keymaps/66_ansi/readme.md b/keyboards/clueboard/66_hotswap/keymaps/66_ansi/readme.md deleted file mode 100644 index 25b5d7eb18c..00000000000 --- a/keyboards/clueboard/66_hotswap/keymaps/66_ansi/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png) - -# Basic Clueboard 66% Hotswap Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. - -This uses `LAYOUT_66_ansi`, which is compatable with the `66_ansi` community -layout. diff --git a/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c b/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c deleted file mode 100644 index 6451cf0370b..00000000000 --- a/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c +++ /dev/null @@ -1,123 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -#define _BL 0 -#define _FL 1 -#define _CL 2 - -enum custom_keycodes { - S_BSKTC = SAFE_RANGE, - S_ODEJY, - S_RCKBY, - S_DOEDR, - S_SCALE, - S_ONEUP, - S_COIN, - S_SONIC, - S_ZELDA -}; - -#ifdef AUDIO_ENABLE - float song_basketcase[][2] = SONG(BASKET_CASE); - float song_ode_to_joy[][2] = SONG(ODE_TO_JOY); - float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY); - float song_doe_a_deer[][2] = SONG(DOE_A_DEER); - float song_scale[][2] = SONG(MUSIC_SCALE_SOUND); - float song_coin[][2] = SONG(COIN_SOUND); - float song_one_up[][2] = SONG(ONE_UP_SOUND); - float song_sonic_ring[][2] = SONG(SONIC_RING); - float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE); -#endif - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: Base Layer (Default Layer) - */ -[_BL] = LAYOUT( - KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_SPC, KC_RGUI,KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT), - - /* Keymap _FL: Function Layer - */ -[_FL] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLU, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE, KC_VOLD, \ - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_PGUP, \ - _______,_______,_______, _______,_______, _______,_______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END), - - /* Keymap _CL: Control layer - */ -[_CL] = LAYOUT( - BL_STEP,S_ONEUP,S_SCALE,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, BL_TOGG, BL_INC, \ - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, \ - _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ - _______,_______,_______, BL_BRTG,BL_BRTG, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - #ifdef AUDIO_ENABLE - case S_BSKTC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_basketcase); - } - return false; - case S_ODEJY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_ode_to_joy); - } - return false; - case S_RCKBY: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_rock_a_bye_baby); - } - return false; - case S_DOEDR: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_doe_a_deer); - } - return false; - case S_SCALE: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_scale); - } - return false; - case S_ONEUP: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_one_up); - } - return false; - case S_COIN: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_coin); - } - return false; - case S_SONIC: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_sonic_ring); - } - return false; - case S_ZELDA: - if (record->event.pressed) { - stop_all_notes(); - PLAY_SONG(song_zelda_puzzle); - } - return false; - #endif - } - return true; -} diff --git a/keyboards/clueboard/66_hotswap/keymaps/default/readme.md b/keyboards/clueboard/66_hotswap/keymaps/default/readme.md deleted file mode 100644 index 66e52308869..00000000000 --- a/keyboards/clueboard/66_hotswap/keymaps/default/readme.md +++ /dev/null @@ -1,8 +0,0 @@ -![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png) - -# Default Clueboard 66% Hotswap Layout - -This is the default layout that comes flashed on every Clueboard. For the most -part it's a straightforward and easy to follow layout. The only unusual key is -the key in the upper left, which sends Escape normally, but Grave when any of -the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/66_hotswap/prototype/config.h b/keyboards/clueboard/66_hotswap/prototype/config.h deleted file mode 100644 index 7679d08e523..00000000000 --- a/keyboards/clueboard/66_hotswap/prototype/config.h +++ /dev/null @@ -1,55 +0,0 @@ -#pragma once -#include "config_common.h" - -#define PRODUCT_ID 0x2390 -#define DEVICE_VER 0x0001 - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 5 6 7 8 9 -* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 -*/ - -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -/* Column pin configuration - * col: 0 1 2 3 4 5 6 7 - * pin: F0 F1 F4 F5 F6 F7 E6 B1 - */ -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS - -/* Speaker configuration - */ -#define B7_AUDIO -#define NO_MUSIC_MODE -#define AUDIO_CLICKY - -/* Space savings - */ -#define NO_ACTION_TAPPING - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 1 - -/* Underlight configuration - */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 26 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 -#define RGBLIGHT_EFFECT_BREATHE_MAX 200 -#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 -#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 -#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up -#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at -#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel -#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up diff --git a/keyboards/clueboard/66_hotswap/prototype/prototype.c b/keyboards/clueboard/66_hotswap/prototype/prototype.c deleted file mode 100644 index 991d4b8faea..00000000000 --- a/keyboards/clueboard/66_hotswap/prototype/prototype.c +++ /dev/null @@ -1,63 +0,0 @@ -#include "prototype.h" -#include -#include "backlight.h" -#include "print.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2330 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT ATMEGA32U4 Firmware Dev Kit -#define DESCRIPTION A small board to help you hack on QMK. - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments -*/ -#define MATRIX_ROW_PINS { F0, F5, F4, B4 } -#define MATRIX_COL_PINS { F1, F7, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 20 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* Underlight configuration - */ -#define RGB_DI_PIN E6 -//#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/clueboard/card/info.json b/keyboards/clueboard/card/info.json deleted file mode 100644 index 8dfa035996f..00000000000 --- a/keyboards/clueboard/card/info.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "keyboard_name": "Cluecard", - "keyboard_folder": "clueboard/card", - "url": "", - "maintainer": "skullydazed", - "width": 10, - "height": 8, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"ON/OFF", "x":0, "y":0}, {"label":"SAT+", "x":4, "y":0}, {"label":"BRIGHT+", "x":8, "y":0}, - {"label":"HUE-", "x":2, "y":1}, {"label":"HUE+", "x":6, "y":1}, - {"label":"MODE", "x":0, "y":2}, {"label":"SAT-", "x":4, "y":2}, {"label":"BRIGHT-", "x":8, "y":2}, - {"label":"LAYER", "x":2, "y":4}, - - {"label":"MX1", "x":4, "y":6, "w":2, "h":2}, {"label":"MX2", "x":6, "y":6, "w":2, "h":2}, {"label":"MX3", "x":8, "y":6, "w":2, "h":2} - ] - } - } -} diff --git a/keyboards/clueboard/card/keymaps/default/config.h b/keyboards/clueboard/card/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/clueboard/card/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/clueboard/card/keymaps/default/keymap.c b/keyboards/clueboard/card/keymaps/default/keymap.c deleted file mode 100644 index 0fa1d9d9891..00000000000 --- a/keyboards/clueboard/card/keymaps/default/keymap.c +++ /dev/null @@ -1,68 +0,0 @@ -#include QMK_KEYBOARD_H - -enum custom_keycodes { - SONG_SU = SAFE_RANGE, - SONG_SC, - SONG_GB -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - RGB_TOG, RGB_SAI, RGB_VAI, \ - RGB_HUD, RGB_HUI, \ - RGB_MOD, RGB_SAD, RGB_VAD, \ - BL_STEP, \ - SONG_SU,SONG_SC,SONG_GB \ - ) -}; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float tone_plover[][2] = SONG(PLOVER_SOUND); -float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case SONG_SU: - if (record->event.pressed) { - PLAY_SONG(tone_startup); - } - - return false; - - case SONG_SC: - if (record->event.pressed) { - PLAY_SONG(music_scale); - } - - return false; - - case SONG_GB: - if (record->event.pressed) { - PLAY_SONG(tone_goodbye); - } - - return false; - - default: - return true; - } -} - -void led_set_user(uint8_t usb_led) { -} diff --git a/keyboards/clueboard/card/keymaps/default/readme.md b/keyboards/clueboard/card/keymaps/default/readme.md deleted file mode 100644 index 53ba9025361..00000000000 --- a/keyboards/clueboard/card/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The default keymap for cluecard - -Note that this keymap has audio enabled, so the RGB mode button does not go through the different effects. So the LEDs will still show a static light, that is configurable with the hue, staturation and brightness buttons. You can of course also turn them on and off with the on/off button. diff --git a/keyboards/clueboard/card/keymaps/default/rules.mk b/keyboards/clueboard/card/keymaps/default/rules.mk deleted file mode 100644 index 3b11f550f95..00000000000 --- a/keyboards/clueboard/card/keymaps/default/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/config.h b/keyboards/clueboard/card/keymaps/rgb_effects/config.h deleted file mode 100644 index 0b2a68f544f..00000000000 --- a/keyboards/clueboard/card/keymaps/rgb_effects/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#pragma once - -// place overrides here -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 -#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 -#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c b/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c deleted file mode 100644 index 92d39aef5b6..00000000000 --- a/keyboards/clueboard/card/keymaps/rgb_effects/keymap.c +++ /dev/null @@ -1,28 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - RGB_TOG, RGB_SAI, RGB_VAI, \ - RGB_HUD, RGB_HUI, \ - RGB_MOD, RGB_SAD, RGB_VAD, \ - BL_STEP, \ - KC_NO, KC_NO, KC_NO \ - ) -}; - -const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {255, 170, 85}; -const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {255, 170, 85}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { -} diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/readme.md b/keyboards/clueboard/card/keymaps/rgb_effects/readme.md deleted file mode 100644 index f99dcebf0cf..00000000000 --- a/keyboards/clueboard/card/keymaps/rgb_effects/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# RGB effect test keymap for cluecard - -This keymap is made for testing the RGB effects. Audio is disabled and the mode buttons goes through each effect. If you run HID-listen you will be able to see which effect is active. For a list of effects, check the `rgblight.c` file. - -The hue, saturation and brightness buttons will work depending on which effect is active. diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk deleted file mode 100644 index 54d74abbe53..00000000000 --- a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/clueboard/card/readme.md b/keyboards/clueboard/card/readme.md deleted file mode 100644 index 20272d236c4..00000000000 --- a/keyboards/clueboard/card/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Cluecard - -![Cluecard](https://i.imgur.com/dTu0Pzx.jpg) - -A simple QMK dev kit. - -* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: Cluecard 1.0 -* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed) - -Make example for this keyboard (after setting up your build environment): - - make clueboard/card:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/card/rules.mk b/keyboards/clueboard/card/rules.mk deleted file mode 100644 index 37b439e75a7..00000000000 --- a/keyboards/clueboard/card/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/clueboard/info.json b/keyboards/clueboard/info.json deleted file mode 100644 index 52cee1ccb8b..00000000000 --- a/keyboards/clueboard/info.json +++ /dev/null @@ -1,4 +0,0 @@ -{ - "manufacturer": "Clueboard", - "maintainer": "skullydazed" -} diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md deleted file mode 100644 index 451db3307b9..00000000000 --- a/keyboards/clueboard/readme.md +++ /dev/null @@ -1,13 +0,0 @@ -![Clueboard Logo](https://i.imgur.com/220uMry.png) - -Clueboard makes fully customizable custom keyboards in a variety of form-factors. Inside this directory you'll find support for the entire line of Clueboard products. - -* Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: - * [`17`](17/): Clueboard "Cluepad" PCB - * [`2x1800`](2x1800/): Clueboard 2x1800 PCB - * [`60`](60/): Clueboard 60% PCB - * [`66`](66/): Clueboard 66% PCB - * [`66_hotswap`](66/): Clueboard 66% USB-C Hotswappable PCB - * [`card`](card/): Special Cluecard PCB -* Hardware Availability: [clueboard.co](https://clueboard.co/) diff --git a/keyboards/comet46/comet46.c b/keyboards/comet46/comet46.c deleted file mode 100644 index 0710b8e330d..00000000000 --- a/keyboards/comet46/comet46.c +++ /dev/null @@ -1,22 +0,0 @@ -#include "comet46.h" - -void uart_init(void) { - SERIAL_UART_INIT(); -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - uart_init(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} - -void led_set_kb(uint8_t usb_led) { - -} diff --git a/keyboards/comet46/comet46.h b/keyboards/comet46/comet46.h deleted file mode 100644 index 07dad0a0014..00000000000 --- a/keyboards/comet46/comet46.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef COMET46_H -#define COMET46_H - -#include "quantum.h" -#include "matrix.h" -#include "backlight.h" -#include - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT_kc( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\ - k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\ - k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\ - k43, k44, k45, k46, k47, k48 \ -) \ -{ \ - { KC_##k13, KC_##k01, KC_##k26, KC_##k12, KC_##k00, KC_##k11, KC_##k25, KC_##k42, KC_##k10, KC_##k24}, \ - { KC_##k03, KC_##k28, KC_##k14, KC_##k02, KC_##k27, KC_##k41, KC_##k09, KC_##k23, KC_##k38, KC_##k08}, \ - { KC_##k31, KC_##k16, KC_##k04, KC_##k29, KC_##k15, KC_##k22, KC_##k37, KC_##k07, KC_##k21, KC_##k36}, \ - { KC_NO, KC_##k32, KC_##k17, KC_##k05, KC_##k43, KC_##k48, KC_##k06, KC_##k20, KC_##k35, KC_NO }, \ - { KC_NO, KC_##k45, KC_##k33, KC_##k18, KC_##k44, KC_##k47, KC_##k19, KC_##k34, KC_##k46, KC_NO }, \ -} - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\ - k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\ - k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\ - k43, k44, k45, k46, k47, k48 \ -) \ -{ \ - { k13, k01, k26, k12, k00, k11, k25, k42, k10, k24}, \ - { k03, k28, k14, k02, k27, k41, k09, k23, k38, k08}, \ - { k31, k16, k04, k29, k15, k22, k37, k07, k21, k36}, \ - { KC_NO, k32, k17, k05, k43, k48, k06, k20, k35, KC_NO }, \ - { KC_NO, k45, k33, k18, k44, k47, k19, k34, k46, KC_NO }, \ -} -#endif diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h deleted file mode 100644 index c43f13a5054..00000000000 --- a/keyboards/comet46/config.h +++ /dev/null @@ -1,85 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER SatT -#define PRODUCT Comet46 -#define DESCRIPTION qmk keyboard firmware for Comet46 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 10 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - -#define ONESHOT_TIMEOUT 500 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -// Define masks for modifiers -#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) -#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) -#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) -#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)) - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_DATA UDR1 -#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT() do { \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ - } while(0) - -#endif diff --git a/keyboards/comet46/i2c.c b/keyboards/comet46/i2c.c deleted file mode 100644 index 4bee5c63982..00000000000 --- a/keyboards/comet46/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/comet46/info.json b/keyboards/comet46/info.json deleted file mode 100644 index 9881397b404..00000000000 --- a/keyboards/comet46/info.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "keyboard_name": "Comet46", - "url": "", - "maintainer": "SatT", - "width": 15, - "height": 4.9, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"TAB", "x":0, "y":0.45}, - {"label":"Q", "x":1, "y":0.45}, - {"label":"W", "x":2, "y":0.15}, - {"label":"E", "x":3, "y":0}, - {"label":"R", "x":4, "y":0.30}, - {"label":"T", "x":5, "y":0.45}, - {"label":"Y", "x":9, "y":0.45}, - {"label":"U", "x":10, "y":0.30}, - {"label":"I", "x":11, "y":0}, - {"label":"O", "x":12, "y":0.15}, - {"label":"P", "x":13, "y":0.45}, - {"label":"BSPC", "x":14, "y":0.45}, - - {"label":"LCTL", "x":0, "y":1.45}, - {"label":"A", "x":1, "y":1.45}, - {"label":"S", "x":2, "y":1.15}, - {"label":"D", "x":3, "y":1}, - {"label":"F", "x":4, "y":1.30}, - {"label":"G", "x":5, "y":1.45}, - {"label":"ESC", "x":6, "y":1}, - {"label":"DEL", "x":8, "y":1}, - {"label":"H", "x":9, "y":1.45}, - {"label":"J", "x":10, "y":1.30}, - {"label":"K", "x":11, "y":1}, - {"label":"L", "x":12, "y":1.15}, - {"label":"SCLN", "x":13, "y":1.45}, - {"label":"QUOT", "x":14, "y":1.45}, - - {"label":"LSFT", "x":0, "y":2.45}, - {"label":"Z", "x":1, "y":2.45}, - {"label":"X", "x":2, "y":2.15}, - {"label":"C", "x":3, "y":2}, - {"label":"V", "x":4, "y":2.30}, - {"label":"B", "x":5, "y":2.45}, - {"label":"LCBR", "x":6, "y":2}, - {"label":"RCBR", "x":8, "y":2}, - {"label":"N", "x":9, "y":2.45}, - {"label":"M", "x":10, "y":2.30}, - {"label":"COMM", "x":11, "y":2}, - {"label":"DOT", "x":12, "y":2.15}, - {"label":"SLSH", "x":13, "y":2.45}, - {"label":"RSFT", "x":14, "y":2.45}, - - {"label":"LGUI", "x":4, "y":3.9}, - {"label":"LOWER", "x":5, "y":3.9}, - {"label":"SPACE", "x":6, "y":3.4, "h":1.5}, - {"label":"ENTER", "x":8, "y":3.4, "h":1.5}, - {"label":"RAISE", "x":9, "y":3.9}, - {"label":"LALT", "x":10, "y":3.9} - ] - } - } -} diff --git a/keyboards/comet46/keymaps/default-rgbled/keymap.c b/keyboards/comet46/keymaps/default-rgbled/keymap.c deleted file mode 100644 index a576cc36b13..00000000000 --- a/keyboards/comet46/keymaps/default-rgbled/keymap.c +++ /dev/null @@ -1,223 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum comet46_layers -{ - _QWERTY, - _COLEMAK, - _DVORAK, - _LOWER, - _RAISE, - _ADJUST, -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, -}; - -#define LOWER MO(_LOWER) -#define RAISE MO(_RAISE) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_QWERTY] = LAYOUT( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Colemak - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_COLEMAK] = LAYOUT( - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Dvorak - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_DVORAK] = LAYOUT( - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, - KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Lower - * ,-----------------------------------------+ +-----------------------------------------. - * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | | | | ` | \ | - | = | [ | ] | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | | | | ~ | | | _ | + | { | } | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_LOWER] = LAYOUT( - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, - _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, - _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, - _______, _______, _______, _______, _______, _______ - ), - - /* Raise - * ,-----------------------------------------+ +-----------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | | | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_RAISE] = LAYOUT( - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______, - _______, _______, _______, _______, _______, _______ - ), - - /* Adjust - * ,-----------------------------------------+ +-----------------------------------------. - * | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | |Qwerty| |Colemk| | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | |Reset | |Dvorak| | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_ADJUST] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ) -}; - - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); -} - -// settings for LED on receiver -void led_init(void) { - DDRD |= (1<<1); - PORTD |= (1<<1); - DDRF |= (1<<4) | (1<<5); - PORTF |= (1<<4) | (1<<5); -} - -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) - -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on - -void matrix_init_user(void) { - led_init(); -} - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - uint8_t default_layer = biton32(eeconfig_read_default_layer()); - switch (layer) { - case _LOWER: - set_led_red; - break; - case _RAISE: - set_led_blue; - break; - case _ADJUST: - set_led_magenta; - break; - default: - switch (default_layer) { - case _COLEMAK: - set_led_white; - break; - case _DVORAK: - set_led_yellow; - break; - default: - set_led_green; - break; - } - break; - } -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - break; - } - return true; -} diff --git a/keyboards/comet46/keymaps/default-rgbled/readme.md b/keyboards/comet46/keymaps/default-rgbled/readme.md deleted file mode 100644 index 40cc7443376..00000000000 --- a/keyboards/comet46/keymaps/default-rgbled/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -## default-led - -A keymap that is compatible with mitosis-type receivers, which use RGB LED for layer indication. diff --git a/keyboards/comet46/keymaps/default/config.h b/keyboards/comet46/keymaps/default/config.h deleted file mode 100644 index ee02a94b7e1..00000000000 --- a/keyboards/comet46/keymaps/default/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -// place overrides here - - -/* Use I2C or Serial */ - -#define USE_I2C -#define SSD1306OLED diff --git a/keyboards/comet46/keymaps/default/keymap.c b/keyboards/comet46/keymaps/default/keymap.c deleted file mode 100644 index 9ef96764657..00000000000 --- a/keyboards/comet46/keymaps/default/keymap.c +++ /dev/null @@ -1,253 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum comet46_layers -{ - _QWERTY, - _COLEMAK, - _DVORAK, - _LOWER, - _RAISE, - _ADJUST, -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, -}; - -#define LOWER MO(_LOWER) -#define RAISE MO(_RAISE) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_QWERTY] = LAYOUT( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Colemak - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_COLEMAK] = LAYOUT( - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Dvorak - * ,-----------------------------------------+ +-----------------------------------------. - * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift| - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | GUI | Lower| Space| | Enter| Raise| Alt | - * +--------------------/ \--------------------+ - */ - [_DVORAK] = LAYOUT( - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, - KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT - ), - - /* Lower - * ,-----------------------------------------+ +-----------------------------------------. - * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | | | | ` | \ | - | = | [ | ] | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | | | | ~ | | | _ | + | { | } | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_LOWER] = LAYOUT( - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, - _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, - _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, - _______, _______, _______, _______, _______, _______ - ), - - /* Raise - * ,-----------------------------------------+ +-----------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | | | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_RAISE] = LAYOUT( - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______, - _______, _______, _______, _______, _______, _______ - ), - - /* Adjust - * ,-----------------------------------------+ +-----------------------------------------. - * | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | |Qwerty| |Colemk| | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | | | | | |Reset | |Dvorak| | | | | | | - * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| - * | | | | | | | | - * +--------------------/ \--------------------+ - */ - [_ADJUST] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______ - ) -}; - - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// You need to add source files to SRC in rules.mk when using OLED display functions -void set_keylog(uint16_t keycode); -const char *read_keylog(void); -const char *read_modifier_state(void); -const char *read_host_led_state(void); - -void matrix_init_user(void) { - iota_gfx_init(false); // turns on the display -} - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void render_status(struct CharacterMatrix *matrix) { - // Layer state - char layer_str[22]; - matrix_write(matrix, "Layer: "); - uint8_t layer = biton32(layer_state); - uint8_t default_layer = biton32(eeconfig_read_default_layer()); - switch (layer) { - case _QWERTY: - switch (default_layer) { - case _QWERTY: - snprintf(layer_str, sizeof(layer_str), "Qwerty"); - break; - case _COLEMAK: - snprintf(layer_str, sizeof(layer_str), "Colemak"); - break; - case _DVORAK: - snprintf(layer_str, sizeof(layer_str), "Dvorak"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); - break; - } - break; - case _RAISE: - snprintf(layer_str, sizeof(layer_str), "Raise"); - break; - case _LOWER: - snprintf(layer_str, sizeof(layer_str), "Lower"); - break; - case _ADJUST: - snprintf(layer_str, sizeof(layer_str), "Adjust"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); - } - matrix_write_ln(matrix, layer_str); - // Last entered keycode - matrix_write_ln(matrix, read_keylog()); - // Modifier state - matrix_write_ln(matrix, read_modifier_state()); - // Host Keyboard LED Status - matrix_write(matrix, read_host_led_state()); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - render_status(&matrix); - matrix_update(&display, &matrix); -} - -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED - if (record->event.pressed) { - set_keylog(keycode); - } - #endif - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - break; - } - return true; -} diff --git a/keyboards/comet46/keymaps/default/readme.md b/keyboards/comet46/keymaps/default/readme.md deleted file mode 100644 index b0085d2a626..00000000000 --- a/keyboards/comet46/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -## default-oled-display - -A keymap that is compatible with receivers with an OLED display. diff --git a/keyboards/comet46/keymaps/default/rules.mk b/keyboards/comet46/keymaps/default/rules.mk deleted file mode 100644 index 3fa01f96af5..00000000000 --- a/keyboards/comet46/keymaps/default/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -# If you want to change display settings of the OLED, you need to change the following lines -SRC += ./lib/glcdfont.c \ - ./lib/keylogger.c \ - ./lib/modifier_state_reader.c \ - ./lib/host_led_state_reader.c diff --git a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c deleted file mode 100644 index 4a7cb3a3a2f..00000000000 --- a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c +++ /dev/null @@ -1,143 +0,0 @@ -#include "quantum.h" -#include "command.h" -#include "action_pseudo_lut.h" - -static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; - -/* - * Pseudo layout action. - * This action converts a keycode in order to output the character according to the keymap you specified - * still your keyboard layout recognized wrongly on your OS. - * Memo: Using other layer keymap to get keycode - */ -void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) { - uint8_t prev_shift; - uint16_t keycode; - uint16_t pseudo_keycode; - - /* get keycode from keymap you specified */ - keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); - - prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); - - if (record->event.pressed) { - /* when magic commands entered, keycode does not converted */ - if (IS_COMMAND()) { - if (prev_shift) { - add_shift_bit(keycode); - } - register_code(keycode); - return; - } - - if (prev_shift) { - pseudo_keycode = convert_keycode(keymap, keycode, true); - dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); - add_shift_bit(keycode); - - if (IS_LSFT(pseudo_keycode)) { - register_code(QK_LSFT ^ pseudo_keycode); - } else { - /* delete shift mod temporarily */ - del_mods(prev_shift); - send_keyboard_report(); - register_code(pseudo_keycode); - add_mods(prev_shift); - send_keyboard_report(); - } - } else { - pseudo_keycode = convert_keycode(keymap, keycode, false); - dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); - - if (IS_LSFT(pseudo_keycode)) { - add_weak_mods(MOD_BIT(KC_LSFT)); - send_keyboard_report(); - register_code(QK_LSFT ^ pseudo_keycode); - /* on Windows, prevent key repeat to avoid unintended output */ - unregister_code(QK_LSFT ^ pseudo_keycode); - del_weak_mods(MOD_BIT(KC_LSFT)); - send_keyboard_report(); - } else { - register_code(pseudo_keycode); - } - } - } else { - if (get_shift_bit(keycode)) { - del_shift_bit(keycode); - pseudo_keycode = convert_keycode(keymap, keycode, true); - } else { - pseudo_keycode = convert_keycode(keymap, keycode, false); - } - dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); - - if (IS_LSFT(pseudo_keycode)) { - unregister_code(QK_LSFT ^ pseudo_keycode); - } else { - unregister_code(pseudo_keycode); - } - } -} - -uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded) -{ - uint16_t pseudo_keycode; - - switch (keycode) { - case KC_A ... KC_CAPSLOCK: - #if defined(__AVR__) - if (shift_modded) { - pseudo_keycode = pgm_read_word(&keymap[keycode][1]); - } else { - pseudo_keycode = pgm_read_word(&keymap[keycode][0]); - } - #else - if (shift_modded) { - pseudo_keycode = keymap[keycode][1]; - } else { - pseudo_keycode = keymap[keycode][0]; - } - #endif - /* if undefined, use got keycode as it is */ - if (pseudo_keycode == 0x00) { - if (shift_modded) { - pseudo_keycode = S(keycode); - } else { - pseudo_keycode = keycode; - } - } - break; - default: - if (shift_modded) { - pseudo_keycode = S(keycode); - } else { - pseudo_keycode = keycode; - } - break; - } - return pseudo_keycode; -} - -uint8_t get_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); - } else { - dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); - return 0; - } -} - -void add_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); - } else { - dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); - } -} - -void del_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); - } else { - dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); - } -} diff --git a/keyboards/comet46/keymaps/satt/action_pseudo_lut.h b/keyboards/comet46/keymaps/satt/action_pseudo_lut.h deleted file mode 100644 index 681252440f4..00000000000 --- a/keyboards/comet46/keymaps/satt/action_pseudo_lut.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ACTION_PSEUDO_LUT_H -#define ACTION_PSEUDO_LUT_H - -#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key - -#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT) - -void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]); -uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool); - -uint8_t get_shift_bit(uint16_t); -void add_shift_bit(uint16_t); -void del_shift_bit(uint16_t); - -#endif diff --git a/keyboards/comet46/keymaps/satt/config.h b/keyboards/comet46/keymaps/satt/config.h deleted file mode 100644 index a3ca2ebfefe..00000000000 --- a/keyboards/comet46/keymaps/satt/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -/* Use I2C or Serial */ - -#define USE_I2C -#define SSD1306OLED - -#endif diff --git a/keyboards/comet46/keymaps/satt/keymap.c b/keyboards/comet46/keymaps/satt/keymap.c deleted file mode 100644 index eec40eff49c..00000000000 --- a/keyboards/comet46/keymaps/satt/keymap.c +++ /dev/null @@ -1,292 +0,0 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, - -#include QMK_KEYBOARD_H -#include "keymap_jis2us.h" -#include "action_pseudo_lut.h" -#include "keymap_jp.h" -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum comet46_layers { - _QWERTY, - _LOWER, - _RAISE, - _PSEUDO_US, - _PSEUDO_US_LOWER, - _PSEUDO_US_RAISE, - _ADJUST -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - PSEUDO_US, - JIS2US, -}; - -// JIS keycodes -#define KC_JZHT JP_ZHTG // hankaku/zenkaku|kanzi -#define KC_JCIR JP_CIRC // ^, ~ -#define KC_JAT JP_AT // @, ` -#define KC_JLBR JP_LBRC // [, { -#define KC_JCOL JP_COLN // :, * -#define KC_JRBR JP_RBRC // ], } -#define KC_JBSL JP_BSLS // \, _ -#define KC_JMHE JP_MHEN // muhenkan -#define KC_JHEN JP_HENK // henkan -#define KC_JKAN JP_KANA // katakana/hiragana|ro-mazi -#define KC_JMKA JP_MKANA //kana on MacOSX -#define KC_JMEI JP_MEISU //eisu on MacOSX -#define KC_JAMP JP_AMPR // & -#define KC_JQUO JP_QUOT // ' -#define KC_JLPR JP_LPRN // ( -#define KC_JRPR JP_RPRN // ) -#define KC_JEQL JP_EQL // = -#define KC_JTIL JP_TILD // ~ -#define KC_JPIP JP_PIPE // | -#define KC_JGRV JP_GRV // ` -#define KC_JLCB JP_LCBR // { -#define KC_JPLU JP_PLUS // + -#define KC_JAST JP_ASTR // * -#define KC_JRCB JP_RCBR // } -#define KC_JUND JP_UNDS // _ - -// Layer related keycodes -#define KC_LWR MO(_LOWER) -#define KC_RSE MO(_RAISE) -#define KC_P_LW MO(_PSEUDO_US_LOWER) -#define KC_P_RS MO(_PSEUDO_US_RAISE) -#define KC_QWRT QWERTY -#define KC_P_US PSEUDO_US -#define KC_J2US JIS2US - -// Special keycodes -#define KC_SPCT CTL_T(KC_SPC) -#define KC_ENSF SFT_T(KC_ENT) -#define KC_CAEC MT(MOD_LCTL | MOD_LALT, KC_ESC) -#define KC_CSTB C_S_T(KC_TAB) -#define KC_IMON ALT_T(KC_F13) -#define KC_IMOF GUI_T(KC_F14) -#define KC_CAD LCA(KC_DEL) -#define KC_RST RESET - -// Fillers to make layering more clear -#define KC_ KC_TRNS -#define KC_XXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - CSTB, A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - LSFT, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - IMOF,LWR ,SPCT, ENSF,RSE ,IMON - // +----+----+---/ \---+----+----+ - ), - - [_LOWER] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , F1 , F2 , F3 , F4 , F5 , F6 , GRV ,BSLS,MINS,EQL ,LBRC,RBRC, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , F7 , F8 , F9 , F10, F11, F12, TILD,PIPE,UNDS,PLUS,LCBR,RCBR, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , - // +----+----+---/ \---+----+----+ - ), - - [_RAISE] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , , , , , , , XXXX,LEFT,DOWN, UP ,RGHT,END , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , - // +----+----+---/ \---+----+----+ - ), - - [_PSEUDO_US] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - CSTB, A , S , D , F , G ,JLPR, JRPR, H , J , K , L ,J2US,BSPC, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - LSFT, Z , X , C , V , B ,J2US, J2US, N , M ,COMM,DOT ,SLSH,J2US, - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - IMOF,P_LW,SPCT, ENSF,P_RS,IMON - // +----+----+---/ \---+----+----+ - ), - - - [_PSEUDO_US_LOWER] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - ,EXLM,JAT ,HASH,DLR ,PERC, JCIR,JAMP,JAST,JLPR,JRPR, , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , F1 , F2 , F3 , F4 , F5 , F6 , JGRV,JBSL,MINS,JEQL,JLBR,JRBR, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , F7 , F8 , F9 , F10, F11, F12, JTIL,JPIP,JUND,JPLU,JLCB,JRCB, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , - // +----+----+---/ \---+----+----+ - ), - - [_PSEUDO_US_RAISE] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , , , , , ,JZHT, XXXX,LEFT,DOWN, UP ,RGHT,END , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , - // +----+----+---/ \---+----+----+ - ), - - [_ADJUST] = LAYOUT_kc( - //,----+----+----+----+----+----+ +----+----+----+----+----+----. - , , , , , , , , , , , , - //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , , , , , ,CAD , QWRT, , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , ,RST , P_US, , , , , , , - //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , - // +----+----+---/ \---+----+----+ - ) - -}; - -uint32_t layer_state_set_user(uint32_t state) { - switch (biton32(state)) { - case _PSEUDO_US_LOWER: - case _PSEUDO_US_RAISE: - return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); - break; - default: - return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); - break; - } -} - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// You need to add source files to SRC in rules.mk when using OLED display functions -void set_keylog(uint16_t keycode); -const char *read_keylog(void); -const char *read_modifier_state(void); -const char *read_host_led_state(void); - -void matrix_init_user(void) { - iota_gfx_init(false); // turns on the display -} - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void render_status(struct CharacterMatrix *matrix) { - // Layer state - char layer_str[22]; - matrix_write(matrix, "Layer: "); - uint8_t layer = biton32(layer_state); - uint8_t default_layer = biton32(eeconfig_read_default_layer()); - switch (layer) { - case _QWERTY: - switch (default_layer) { - case _QWERTY: - snprintf(layer_str, sizeof(layer_str), "Qwerty"); - break; - case _PSEUDO_US: - snprintf(layer_str, sizeof(layer_str), "Psuedo_US"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); - break; - } - break; - case _RAISE: - snprintf(layer_str, sizeof(layer_str), "Raise"); - break; - case _LOWER: - snprintf(layer_str, sizeof(layer_str), "Lower"); - break; - case _PSEUDO_US_RAISE: - snprintf(layer_str, sizeof(layer_str), "P_US_Raise"); - break; - case _PSEUDO_US_LOWER: - snprintf(layer_str, sizeof(layer_str), "P_US_Lower"); - break; - case _ADJUST: - snprintf(layer_str, sizeof(layer_str), "Adjust"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); - } - matrix_write_ln(matrix, layer_str); - // Last entered keycode - matrix_write_ln(matrix, read_keylog()); - // Modifier state - matrix_write_ln(matrix, read_modifier_state()); - // Host Keyboard LED Status - matrix_write(matrix, read_host_led_state()); -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - render_status(&matrix); - matrix_update(&display, &matrix); -} - -#endif//SSD1306OLED - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED - if (record->event.pressed) { - set_keylog(keycode); - } - #endif - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - break; - case PSEUDO_US: - if (record->event.pressed) { - set_single_persistent_default_layer(_PSEUDO_US); - } - break; - case JIS2US: - action_pseudo_lut(record, _QWERTY, keymap_jis2us); - break; - } - return true; -} diff --git a/keyboards/comet46/keymaps/satt/keymap_jis2us.h b/keyboards/comet46/keymaps/satt/keymap_jis2us.h deleted file mode 100644 index e32a0579aa0..00000000000 --- a/keyboards/comet46/keymaps/satt/keymap_jis2us.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef KEYMAP_JIS2US_H -#define KEYMAP_JIS2US_H - -/* keymap for convert from JIS to US */ -const uint16_t PROGMEM keymap_jis2us[][2] = { - [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ - - [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ - [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ - [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ - [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ - [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ - [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ - [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ - [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ - [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ - [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ - [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ - [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ - [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ - [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ - [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ - [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ - [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ - [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ - [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ - [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ - [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ - [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ -}; - -#endif diff --git a/keyboards/comet46/keymaps/satt/readme.md b/keyboards/comet46/keymaps/satt/readme.md deleted file mode 100644 index 33bbad3264b..00000000000 --- a/keyboards/comet46/keymaps/satt/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -## Pseudo US Layout - -On a Japanese Windows environment, ANSI keyboards may be recognized wrongly as a JIS keyboard. -By using this code, you can use your ANSI keyboard under a JIS keyboard environment without changing the settings and registry of your environment. - -Original code by [Shela](https://github.com/qmk/qmk_firmware/tree/master/keyboards/hhkb/keymaps/shela) diff --git a/keyboards/comet46/keymaps/satt/rules.mk b/keyboards/comet46/keymaps/satt/rules.mk deleted file mode 100644 index 91609dd4fdf..00000000000 --- a/keyboards/comet46/keymaps/satt/rules.mk +++ /dev/null @@ -1,8 +0,0 @@ -SRC += action_pseudo_lut.c - -# If you want to change display settings of the OLED, you need to change the following lines -SRC += ./lib/glcdfont.c \ - ./lib/keylogger.c \ - ./lib/modifier_state_reader.c \ - ./lib/host_led_state_reader.c - diff --git a/keyboards/comet46/lib/glcdfont.c b/keyboards/comet46/lib/glcdfont.c deleted file mode 100644 index e912d2233c4..00000000000 --- a/keyboards/comet46/lib/glcdfont.c +++ /dev/null @@ -1,148 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H - -#ifdef __AVR__ - #include - #include -#elif defined(ESP8266) - #include -#else - #define PROGMEM -#endif - -// Standard ASCII 5x7 font - -const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, - 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, - 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, - 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, - 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, - 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, - 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, - 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, - 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, - 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, - 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, - 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, - 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, - 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, - 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, - 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, - 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, - 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, - 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, - 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, - 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, - 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, - 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, - 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, - 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, - 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, - 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, - 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, - 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, - 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, - 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, - 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, - 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, - 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, - 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, - 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, - 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, - 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, - 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, - 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, - 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, - 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, - 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, - 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, - 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, - 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, - 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, - 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, - 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, - 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, - 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, - 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, - 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, - 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, - 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, - 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, - 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, - 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, - 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, - 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, - 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, - 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, - 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, - 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, - 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, - 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, - 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, - 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, - 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, - 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, - 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, - 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, - 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, - 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, - 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, - 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, - 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, - 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, - 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, - 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, - 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, - 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, - 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, - 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, - 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, - 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, - 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, - 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00 -}; -#endif // FONT5X7_H diff --git a/keyboards/comet46/lib/host_led_state_reader.c b/keyboards/comet46/lib/host_led_state_reader.c deleted file mode 100644 index 864b1e24475..00000000000 --- a/keyboards/comet46/lib/host_led_state_reader.c +++ /dev/null @@ -1,15 +0,0 @@ -#include -#include "comet46.h" - -char host_led_state_str[22]; - -const char *read_host_led_state(void) { - uint8_t leds = host_keyboard_leds(); - - snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s", - (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "", - (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "", - (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : ""); - - return host_led_state_str; -} diff --git a/keyboards/comet46/lib/keylogger.c b/keyboards/comet46/lib/keylogger.c deleted file mode 100644 index 184f601095a..00000000000 --- a/keyboards/comet46/lib/keylogger.c +++ /dev/null @@ -1,294 +0,0 @@ -#include - -#ifdef __AVR__ - #include - #include -#else - #define PROGMEM -#endif - -#define NUM_USB_HID_KEYCODES 255 -#define LEN_KEYCODE_STR 4 - -char keylog[22] = {"KC: ID: "}; - -// Quick and dirty way to display USB HID keycodes used in QMK -// USB HID keycodes from 0x0000 to 0x00FF are stored in a 4x256+1 length char -const char code_to_name[] PROGMEM = { - "NO " //0x00 - "TRNS" - "? " - "? " - "A " - "B " - "C " - "D " - "E " - "F " - "G " - "H " - "I " - "J " - "K " - "L " - "M " //0x10 - "N " - "O " - "P " - "Q " - "R " - "S " - "T " - "U " - "V " - "W " - "X " - "Y " - "Z " - "1 " - "2 " - "3 " //0x20 - "4 " - "5 " - "6 " - "7 " - "8 " - "9 " - "0 " - "ENT " - "ESC " - "BSPC" - "TAB " - "SPC " - "MINS" - "EQL " - "LBRC" - "RBRC" //0x30 - "BSLS" - "NUHS" - "SCLN" - "QUOT" - "GRV " - "COMM" - "DOT " - "SLSH" - "CAPS" - "F1 " - "F2 " - "F3 " - "F4 " - "F5 " - "F6 " - "F7 " //0x40 - "F8 " - "F9 " - "F10 " - "F11 " - "F12 " - "PSCR" - "SLCK" - "PAUS" - "INS " - "HOME" - "PGUP" - "DEL " - "END " - "PGDN" - "RGHT" - "LEFT" //0x50 - "DOWN" - "UP " - "NLCK" - "PSLS" - "PAST" - "PMNS" - "PPLS" - "PENT" - "P1 " - "P2 " - "P3 " - "P4 " - "P5 " - "P6 " - "P7 " - "P8 " //0x60 - "P9 " - "P0 " - "PDOT" - "NUBS" - "APP " - "POW " - "PEQL" - "F13 " - "F14 " - "F15 " - "F16 " - "F17 " - "F18 " - "F19 " - "F20 " - "F21 " //0x70 - "F22 " - "F23 " - "F24 " - "EXEC" - "HELP" - "MENU" - "SLCT" - "STOP" - "AGIN" - "UNDO" - "CUT " - "COPY" - "PSTE" - "FIND" - "_MUT" - "_VUP" //0x80 - "_VDN" - "LCAP" - "LNUM" - "LSCR" - "PCMM" - "PEQA" - "INT1" - "INT2" - "INT3" - "INT4" - "INT5" - "INT6" - "INT7" - "INT8" - "INT9" - "LAN1" //0x90 - "LAN2" - "LAN3" - "LAN4" - "LAN5" - "LAN6" - "LAN7" - "LAN8" - "LAN9" - "ERAS" - "SYSR" - "CNCL" - "CLR " - "PRIR" - "RTRN" - "SEP " - "OUT " //0xA0 - "OPER" - "CLRA" - "CSEL" - "ESEL" - "PWR " //0xA5 - "SLEP" - "WAKE" - "MUTE" - "VOLU" - "VOLD" - "MNXT" - "MPRV" - "MSTP" - "MPLY" - "MSEL" - "EJCT" //0xB0 - "MAIL" - "CALC" - "MYCM" - "WSCH" - "WHOM" - "WBAK" - "WFWD" - "WSTP" - "WREF" - "WFAV" - "MFFD" - "MRWD" - "BRIU" - "BRID" - "? " - "FN0 " //0xC0 - "FN1 " - "FN2 " - "FN3 " - "FN4 " - "FN5 " - "FN6 " - "FN7 " - "FN8 " - "FN9 " - "FN10" - "FN11" - "FN12" - "FN13" - "FN14" - "FN15" - "FN16" //0xD0 - "FN17" - "FN18" - "FN19" - "FN20" - "FN21" - "FN22" - "FN23" - "FN24" - "FN25" - "FN26" - "FN27" - "FN28" - "FN29" - "FN30" - "FN31" - "LCTL" //0xE0 - "LSFT" - "LALT" - "LGUI" - "RCTL" - "RSFT" - "RALT" - "RGUI" - "? " - "? " - "? " - "? " - "? " - "? " - "? " - "? " - "MS_U" //0xF0 - "MS_D" - "MS_L" - "MS_R" - "BTN1" - "BTN2" - "BTN3" - "BTN4" - "BTN5" - "WH_U" - "WH_D" - "WH_L" - "WH_R" - "ACL0" - "ACL1" - "ACL2" -}; - -void set_keylog(uint16_t keycode) -{ - char name[LEN_KEYCODE_STR+1] = "? "; - - if (keycode <= NUM_USB_HID_KEYCODES) { - for (uint8_t k = 0; k < LEN_KEYCODE_STR; k++) { - name[k] = pgm_read_byte_near(code_to_name + keycode * LEN_KEYCODE_STR + k); - } - } else if (keycode > NUM_USB_HID_KEYCODES) { - snprintf(name, sizeof(name), "QMK "); - } - - // update keylog - snprintf(keylog, sizeof(keylog), "KC: %s ID: %d", name, keycode); -} - -const char *read_keylog(void) { - return keylog; -} diff --git a/keyboards/comet46/lib/modifier_state_reader.c b/keyboards/comet46/lib/modifier_state_reader.c deleted file mode 100644 index 518eef92a62..00000000000 --- a/keyboards/comet46/lib/modifier_state_reader.c +++ /dev/null @@ -1,18 +0,0 @@ -#include -#include "comet46.h" - -char modifier_state_str[22]; - -const char *read_modifier_state(void) { - uint8_t modifiers = get_mods(); - uint8_t one_shot = get_oneshot_mods(); - - snprintf(modifier_state_str, sizeof(modifier_state_str), "Mod: %s%s%s%s", - (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL " : "", - (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI " : "", - (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT " : "", - (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : "" - ); - - return modifier_state_str; -} diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c deleted file mode 100644 index dc38ba74f86..00000000000 --- a/keyboards/comet46/matrix.c +++ /dev/null @@ -1,154 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include -#if defined(__AVR__) -#include -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - SERIAL_UART_INIT(); - - uint32_t timeout = 0; - - //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; - - //trust the external keystates entirely, erase the last data - uint8_t uart_data[11] = {0}; - - //there are 10 bytes corresponding to 10 columns, and an end byte - for (uint8_t i = 0; i < 11; i++) { - //wait for the serial data, timeout if it's been too long - //this only happened in testing with a loose wire, but does no - //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ - timeout++; - if (timeout > 10000){ - break; - } - } - uart_data[i] = SERIAL_UART_DATA; - } - - //check for the end packet, the key state bytes use the LSBs, so 0xE0 - //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { - //shifting and transferring the keystates to the QMK matrix variable - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; - } - } - - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1< -#include "print.h" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -extern const unsigned char font[] PROGMEM; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ - -// 'last_flush' is declared as uint16_t, -// so this must be less than 65535 -#define ScreenOffInterval 60000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -static bool force_dirty = true; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { - char data_ln[strlen(data)+2]; - snprintf(data_ln, sizeof(data_ln), "%s\n", data); - matrix_write(matrix, data_ln); -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty|| force_dirty) { - iota_gfx_flush(); - force_dirty = false; - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { - force_dirty = true; - return true; -} - -#endif diff --git a/keyboards/comet46/ssd1306.h b/keyboards/comet46/ssd1306.h deleted file mode 100644 index ea8c9232805..00000000000 --- a/keyboards/comet46/ssd1306.h +++ /dev/null @@ -1,91 +0,0 @@ -#pragma once - -#include -#include -#include "pincontrol.h" -#include "action.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record); \ No newline at end of file diff --git a/keyboards/contra/config.h b/keyboards/contra/config.h deleted file mode 100755 index b32d8686542..00000000000 --- a/keyboards/contra/config.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Cartel -#define PRODUCT Contra -#define DESCRIPTION Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F6, B3, B2, B6 } -#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ - -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 0 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 0 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -#endif diff --git a/keyboards/contra/contra.c b/keyboards/contra/contra.c deleted file mode 100755 index 3ef66a9c0d5..00000000000 --- a/keyboards/contra/contra.c +++ /dev/null @@ -1 +0,0 @@ -#include "contra.h" diff --git a/keyboards/contra/contra.h b/keyboards/contra/contra.h deleted file mode 100755 index 1ff481097ac..00000000000 --- a/keyboards/contra/contra.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef KB_H -#define KB_H - -#include "quantum.h" - -#define LAYOUT_ortho_4x12( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \ -} - -#define LAYOUT_planck_mit( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ - K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ - { K300, K301, K302, K303, K304, K305, K305, K307, K308, K309, K310, K311 } \ -} - -#define LAYOUT_kc_ortho_4x12( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ -) \ - LAYOUT_ortho_4x12( \ - KC_##K000, KC_##K001, KC_##K002, KC_##K003, KC_##K004, KC_##K005, KC_##K006, KC_##K007, KC_##K008, KC_##K009, KC_##K010, KC_##K011, \ - KC_##K100, KC_##K101, KC_##K102, KC_##K103, KC_##K104, KC_##K105, KC_##K106, KC_##K107, KC_##K108, KC_##K109, KC_##K110, KC_##K111, \ - KC_##K200, KC_##K201, KC_##K202, KC_##K203, KC_##K204, KC_##K205, KC_##K206, KC_##K207, KC_##K208, KC_##K209, KC_##K210, KC_##K211, \ - KC_##K300, KC_##K301, KC_##K302, KC_##K303, KC_##K304, KC_##K305, KC_##K306, KC_##K307, KC_##K308, KC_##K309, KC_##K310, KC_##K311 \ - ) - -#endif diff --git a/keyboards/contra/info.json b/keyboards/contra/info.json deleted file mode 100644 index c047406d01c..00000000000 --- a/keyboards/contra/info.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "keyboard_name": "Contra", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x12": { - "key_count": 48, - "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Back Space", "x":11, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"'", "x":11, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"label":"Return", "x":11, "y":2}, {"x":0, "y":3}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"label":"Super", "x":3, "y":3}, {"label":"⇓", "x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"label":"⇑", "x":7, "y":3}, {"label":"←", "x":8, "y":3}, {"label":"↓", "x":9, "y":3}, {"label":"↑", "x":10, "y":3}, {"label":"→", "x":11, "y":3}] - }, - - "LAYOUT_planck_mit": { - "key_count": 47, - "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Back Space", "x":11, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"'", "x":11, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"label":"Return", "x":11, "y":2}, {"x":0, "y":3}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"label":"Super", "x":3, "y":3}, {"label":"⇓", "x":4, "y":3}, {"x":5, "y":3, "w":2}, {"label":"⇑", "x":7, "y":3}, {"label":"←", "x":8, "y":3}, {"label":"↓", "x":9, "y":3}, {"label":"↑", "x":10, "y":3}, {"label":"→", "x":11, "y":3}] - } - } -} diff --git a/keyboards/contra/keymaps/basic/config.h b/keyboards/contra/keymaps/basic/config.h deleted file mode 100644 index a1635f2bab5..00000000000 --- a/keyboards/contra/keymaps/basic/config.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif - -#define MUSIC_MASK (keycode != KC_NO) - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - -#endif \ No newline at end of file diff --git a/keyboards/contra/keymaps/basic/keymap.c b/keyboards/contra/keymaps/basic/keymap.c deleted file mode 100644 index 1b5336b8e52..00000000000 --- a/keyboards/contra/keymaps/basic/keymap.c +++ /dev/null @@ -1,167 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -enum planck_layers { - _QWERTY, - _COLEMAK, - _LOWER, - _RAISE, - _ADJUST -}; - -enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - LOWER, - RAISE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Esc | Tab | Alt | GUI |Lower | Space |Raise | Left |Right | Up |Down | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = LAYOUT_planck_mit( - KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - KC_ESC, KC_TAB, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_RGHT, KC_UP, KC_DOWN - ), - - /* Colemak - * ,-----------------------------------------------------------------------------------. - * | ` | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Ctrl | A | R | S | T | D | H | N | E | I | O | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Esc | Tab | Alt | GUI |Lower | Space |Raise | Left |Right | Up |Down | - * `-----------------------------------------------------------------------------------' - */ - [_COLEMAK] = LAYOUT_planck_mit( - KC_GRV, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - KC_ESC, KC_TAB, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_RGHT, KC_UP, KC_DOWN - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = LAYOUT_planck_mit( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = LAYOUT_planck_mit( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | |AGnorm|AGswap|Qwerty|Colemk| | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = LAYOUT_planck_mit( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL , - _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - print("mode just switched to qwerty and this is a huge string\n"); - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/contra/keymaps/basic/readme.md b/keyboards/contra/keymaps/basic/readme.md deleted file mode 100644 index 195bc2c1b64..00000000000 --- a/keyboards/contra/keymaps/basic/readme.md +++ /dev/null @@ -1,72 +0,0 @@ -# A Basic Contra Layout - -The *default* layout currently (as of Mar 19, 2018) has a lot of components from Planck's default layout and is not very suitable for a basic Contra board. This basic layout is developed from Planck's default layout but has removed the parts that's irrelevant to a Contra board. - -My other keyboard is a HHKB and I don't use `Tab` or `Esc` key that much and hence the unusual placements for those keys. - -## QWERTY (Normal) Layer -``` -,-----------------------------------------------------------------------------------. - | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | - |------+------+------+------+------+------|------+------+------+------+------+------| - | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - |------+------+------+------+------+------+------+------+------+------+------+------| - | Esc | Tab | Alt | GUI |Lower | Space |Raise | Left |Right | Up |Down | - `-----------------------------------------------------------------------------------' -``` - -## Colemak Layer -Switch from `Adjust` layer. -``` -,-----------------------------------------------------------------------------------. - | ` | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Ctrl | A | R | S | T | D | H | N | E | I | O | ' | - |------+------+------+------+------+------|------+------+------+------+------+------| - | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - |------+------+------+------+------+------+------+------+------+------+------+------| - | Esc | Tab | Alt | GUI |Lower | Space |Raise | Left |Right | Up |Down | - `-----------------------------------------------------------------------------------' -``` - -## Lower -``` -,-----------------------------------------------------------------------------------. - | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | Next | Vol- | Vol+ | Play | - `-----------------------------------------------------------------------------------' -``` - -## Raise -``` -,-----------------------------------------------------------------------------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | Next | Vol- | Vol+ | Play | - `-----------------------------------------------------------------------------------' -``` - -## Adjust -`AGnorm` and `AGswap` switches `alt` and `os` key on the keyboard. -``` -,-----------------------------------------------------------------------------------. - | | | | | | | | | | | | Del | - |------+------+------+------+------+-------------+------+------+------+------+------| - | | | | | |AGnorm|AGswap|Qwerty|Colemk| | | | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | | | | | | | | | | | | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | | | | | - `-----------------------------------------------------------------------------------' -``` \ No newline at end of file diff --git a/keyboards/contra/keymaps/bramver/README.md b/keyboards/contra/keymaps/bramver/README.md deleted file mode 100644 index 5327beba7cb..00000000000 --- a/keyboards/contra/keymaps/bramver/README.md +++ /dev/null @@ -1,35 +0,0 @@ -# Contra layout - -My current setup consists of a very simple base layer, numbers layer, mouse layer and emoji layer. -Still many options, but time will tell if changes are needed. - -## Keymap - -``` -#define SP_MSE LT(_MOUSE, KC_SPC) - - -BASE layer - { KC_GESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC }, - { KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_ENT }, - { KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_QUOT }, - { KC_LCTL , KC_GRV , KC_LALT , KC_LGUI , MO(1) , SP_MSE , SP_MSE , KC_LEFT , KC_DOWN , KC_UP , KC_RGHT , MO(2) }, - -LOWER layer - { _______ , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_DEL }, - { _______ , KC_F1 , KC_F2 , KC_F3 , KC_LBRC , KC_MINS , KC_EQL , KC_RBRC , KC_F7 , KC_F8 , KC_F9 , _______ }, - { _______ , KC_F4 , KC_F5 , KC_F6 , KC_HOME , KC_BSLS , KC_MPLY , KC_END , KC_F10 , KC_F11 , KC_F12 , _______ }, - { _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ }, - -EMOJI layer - { _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ }, - { _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ }, - { _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ }, - { _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ }, - -MOUSE layer - { _______ , KC_WH_L , KC_BTN1 , KC_MS_U , KC_BTN2 , KC_WH_U , KC_WH_U , KC_BTN1 , KC_MS_U , KC_BTN2 , KC_WH_L , _______ }, - { _______ , KC_WH_R , KC_MS_L , KC_MS_D , KC_MS_R , KC_WH_D , KC_WH_D , KC_MS_L , KC_MS_D , KC_MS_R , KC_WH_R , _______ }, - { _______ , KC_VOLD , KC_VOLU , KC_MPRV , KC_MNXT , KC_MPLY , KC_MPLY , KC_MPRV , KC_MNXT , KC_VOLD , KC_VOLU , _______ }, - { _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ }, -``` \ No newline at end of file diff --git a/keyboards/contra/keymaps/bramver/config.h b/keyboards/contra/keymaps/bramver/config.h deleted file mode 100755 index de2a9b0ee14..00000000000 --- a/keyboards/contra/keymaps/bramver/config.h +++ /dev/null @@ -1,9 +0,0 @@ -#pragma once - -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_INTERVAL 16 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_WHEEL_MAX_SPEED 8 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 -#define MOUSEKEY_WHEEL_DELAY 0 diff --git a/keyboards/contra/keymaps/bramver/keymap.c b/keyboards/contra/keymaps/bramver/keymap.c deleted file mode 100644 index 8ccaf686bd4..00000000000 --- a/keyboards/contra/keymaps/bramver/keymap.c +++ /dev/null @@ -1,126 +0,0 @@ -/* Copyright 2018 darm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -enum emoji_map { - UNAM, // unamused 😒 - HEYE, // smiling face with heart shaped eyes 😍 - OK, // ok hand sign 👌 - SMIR, // smirk 😏 - PRAY, // pray 🙏 - CELE, // celebration 🙌 - COOL, // smile with sunglasses 😎 - EYES, // eyes - THNK, // BIG THONK - NAIL, // Nailcare - SOS, // Vuile sos - REDB, // Red B - HNDR, // 100 - MONY, - FIRE, - CAR, - BUTT, - BNIS, - CUM, - CLAP, - TRIU, // Fart from nose - SCRM, - VOMI, - DTIV, // Detective - EXPL, // Brainsplosion - HAIR, // Haircut - DANC, // Salsa dancer - STRN, // Stronk - LEFT, // Point Left - RGHT, // Point Right -}; - -const uint32_t PROGMEM unicode_map[] = { - [UNAM] = 0x1F612, - [HEYE] = 0x1f60d, - [OK] = 0x1F44C, - [SMIR] = 0x1F60F, - [PRAY] = 0x1F64F, - [CELE] = 0x1F64C, - [COOL] = 0x1F60E, - [EYES] = 0x1F440, - [THNK] = 0x1F914, - [NAIL] = 0x1F485, - [SOS] = 0x1F198, - [REDB] = 0x1F171, - [HNDR] = 0x1F4AF, - [MONY] = 0x1F480, - [FIRE] = 0x1F525, - [CAR] = 0x1F697, - [BUTT] = 0x1F351, - [BNIS] = 0x1F346, - [CUM] = 0x1F4A6, - [CLAP] = 0x1F44F, - [TRIU] = 0x1F624, - [SCRM] = 0x1F631, - [VOMI] = 0x1F92E, - [DTIV] = 0x1F575, - [EXPL] = 0x1F92F, - [HAIR] = 0x2640, - [DANC] = 0x1F483, - [STRN] = 0x1F4AA, - [LEFT] = 0x1F448, - [RGHT] = 0x1F449, -}; - -// Layer shorthand -#define _BASE 0 -#define _LOWER 1 -#define _EMOJI 2 -#define _MOUSE 3 - -#define SP_MSE LT(_MOUSE, KC_SPC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BASE] = LAYOUT_ortho_4x12( - KC_GESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC , - KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_ENT , - KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_QUOT , - KC_LCTL , KC_GRV , KC_LALT , KC_LGUI , MO(1) , SP_MSE , SP_MSE , KC_LEFT , KC_DOWN , KC_UP , KC_RGHT , MO(2) - ), - - [_LOWER] = LAYOUT_ortho_4x12( - _______ , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_DEL , - _______ , KC_F1 , KC_F2 , KC_F3 , KC_LBRC , KC_MINS , KC_EQL , KC_RBRC , KC_F7 , KC_F8 , KC_F9 , _______ , - _______ , KC_F4 , KC_F5 , KC_F6 , KC_HOME , KC_BSLS , KC_MPLY , KC_END , KC_F10 , KC_F11 , KC_F12 , _______ , - _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ - ), - - [_EMOJI] = LAYOUT_ortho_4x12( - _______ , X(CLAP) , X(CUM) , X(BNIS) , X(BUTT) , X(CAR) , X(FIRE) , X(REDB) , X(MONY) , X(HNDR) , X(SOS) , _______ , - _______ , X(CELE) , X(PRAY) , X(NAIL) , X(OK) , X(THNK) , X(UNAM) , X(HEYE) , X(COOL) , X(EYES) , X(SMIR) , _______ , - _______ , X(TRIU) , X(SCRM) , X(VOMI) , X(DTIV) , X(EXPL) , X(HAIR) , X(DANC) , X(STRN) , X(LEFT) , X(RGHT) , _______ , - _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ - ), - - [_MOUSE] = LAYOUT_ortho_4x12( - _______ , KC_WH_L , KC_BTN1 , KC_MS_U , KC_BTN2 , KC_WH_U , KC_WH_U , KC_BTN1 , KC_MS_U , KC_BTN2 , KC_WH_L , _______ , - _______ , KC_WH_R , KC_MS_L , KC_MS_D , KC_MS_R , KC_WH_D , KC_WH_D , KC_MS_L , KC_MS_D , KC_MS_R , KC_WH_R , _______ , - _______ , KC_VOLD , KC_VOLU , KC_MPRV , KC_MNXT , KC_MPLY , KC_MPLY , KC_MPRV , KC_MNXT , KC_VOLD , KC_VOLU , _______ , - _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ , _______ - ) - -}; - -void matrix_init_user(void) { - set_unicode_input_mode(UC_LNX); -} diff --git a/keyboards/contra/keymaps/bramver/rules.mk b/keyboards/contra/keymaps/bramver/rules.mk deleted file mode 100755 index 925b1c2b26f..00000000000 --- a/keyboards/contra/keymaps/bramver/rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -NKRO_ENABLE = yes # USB Nkey Rollover -UNICODEMAP_ENABLE = yes # Unicode -BOOTLOADER = atmel-dfu - diff --git a/keyboards/contra/keymaps/dana/config.h b/keyboards/contra/keymaps/dana/config.h deleted file mode 100644 index 2846b579105..00000000000 --- a/keyboards/contra/keymaps/dana/config.h +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - - -#undef TAPPING_TERM -#define TAPPING_TERM 190 - -#define MUSIC_MASK (keycode != KC_NO) -#define MIDI_ADVANCED - -#endif diff --git a/keyboards/contra/keymaps/dana/keymap.c b/keyboards/contra/keymaps/dana/keymap.c deleted file mode 100644 index 51fa9f75fb4..00000000000 --- a/keyboards/contra/keymaps/dana/keymap.c +++ /dev/null @@ -1,32 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | Cmd |Lower | Space |Raise | Enter| Cmd | Alt |Ctrl | - * `-----------------------------------------------------------------------------------' - */ - [0] = LAYOUT_ortho_4x12( - MI_C_4, MI_Cs_4, MI_D_4, MI_Ds_4, MI_E_4, MI_F_4, MI_Fs_4, MI_G_4, MI_Gs_4, MI_A_4, MI_As_4, MI_B_4, - MI_C_3, MI_Cs_3, MI_D_3, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, MI_Gs_3, MI_A_3, MI_As_3, MI_B_3, - MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2, MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, MI_A_2, MI_As_2, MI_B_2, - MI_C_1, MI_Cs_1, MI_D_1, MI_Ds_1, MI_E_1, MI_F_1, MI_Fs_1, MI_G_1, MI_Gs_1, MI_A_1, MI_As_1, MI_B_1 - ) - -}; - - - - diff --git a/keyboards/contra/keymaps/dana/readme.md b/keyboards/contra/keymaps/dana/readme.md deleted file mode 100644 index 75b4582d4af..00000000000 --- a/keyboards/contra/keymaps/dana/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Dana musical MIDI keyboard layout - -Has the contra mapped as a MIDI keyboard, where each row is an octave. - -The keyboard has only MIDI, nothing else! - diff --git a/keyboards/contra/keymaps/dana/rules.mk b/keyboards/contra/keymaps/dana/rules.mk deleted file mode 100644 index cf891fad353..00000000000 --- a/keyboards/contra/keymaps/dana/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = yes # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/contra/keymaps/deastiny/config.h b/keyboards/contra/keymaps/deastiny/config.h deleted file mode 100644 index 8757eb70d45..00000000000 --- a/keyboards/contra/keymaps/deastiny/config.h +++ /dev/null @@ -1,37 +0,0 @@ -#pragma once - -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif - -#define MUSIC_MASK (keycode != KC_NO) - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 diff --git a/keyboards/contra/keymaps/deastiny/keymap.c b/keyboards/contra/keymaps/deastiny/keymap.c deleted file mode 100644 index 846cbe9c7b1..00000000000 --- a/keyboards/contra/keymaps/deastiny/keymap.c +++ /dev/null @@ -1,142 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H -#include "keymap_extras/keymap_german.h" - -extern keymap_config_t keymap_config; - -enum planck_layers { - _DVORAK, - _LOWER, - _RAISE, - _ADJUST -}; - -enum planck_keycodes { - DVORAK = SAFE_RANGE, - LOWER, - RAISE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/** -,-----------------------------------------------------------------------------------. - | ESC | Ü | , | . | P | Y | F | G | C | T | Z | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | TAB | A | O | E | I | U | H | D | R | N | S | L | - |------+------+------+------+------+------|------+------+------+------+------+------| - | Shift| Ä | Ö | Q | J | K | X | B | M | W | V |Enter | - |------+------+------+------+------+------+------+------+------+------+------+------| - | CTRL | GUI | Alt | MOD |Lower | Space |Raise | Left |Right | Up |Down | - `-----------------------------------------------------------------------------------' -**/ - [_DVORAK] = LAYOUT_planck_mit( - KC_ESC, DE_UE, DE_COMM, DE_DOT, DE_P, DE_Y, DE_F, DE_G, DE_C, DE_T, DE_Z, KC_BSPC, - KC_TAB, DE_A, DE_O, DE_E, DE_I, DE_U, DE_H, DE_D, DE_R, DE_N, DE_S, DE_L, - KC_LSFT, DE_AE, DE_OE, DE_Q, DE_J, DE_K, DE_X, DE_B, DE_M, DE_W, DE_V, KC_ENT , - KC_LCTL, KC_LGUI, KC_LALT, MO(3), LOWER, KC_SPC, RAISE, KC_LEFT, KC_RIGHT, KC_UP, KC_DOWN - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = LAYOUT_planck_mit( - DE_TILD, DE_EXLM, DE_AT, DE_HASH, DE_DLR, DE_PERC, DE_CIRC, DE_AMPR, DE_ASTR, DE_LPRN, DE_RPRN, KC_DEL, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, DE_UNDS, DE_PLUS, DE_LCBR, DE_RCBR, DE_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, DE_QST, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = LAYOUT_planck_mit( - DE_GRV, DE_1, DE_2, DE_3, DE_4, DE_5, DE_6, DE_7, DE_8, DE_9, DE_0, KC_DEL, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, DE_MINS, DE_EQL, DE_LBRC, DE_RBRC, DE_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, DE_SLSH, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Adjust (MO(3)) - * ,-----------------------------------------------------------------------------------. - * | | HOME | UP | END | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | LEFT | DOWN | RIGHT| | | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = LAYOUT_planck_mit( - _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, _______, _______, _______, KC_DEL , - _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case DVORAK: - if (record->event.pressed) { - print("mode just switched to dvorak and this is a huge string\n"); - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/contra/keymaps/deastiny/readme.md b/keyboards/contra/keymaps/deastiny/readme.md deleted file mode 100644 index 61d722847ee..00000000000 --- a/keyboards/contra/keymaps/deastiny/readme.md +++ /dev/null @@ -1,56 +0,0 @@ -# A Dvorak Type II based board - -As I switched from a Poker II some keys are based on my experience there. - - -## DVORAK (Normal) Layer -``` -,-----------------------------------------------------------------------------------. - | ESC | Ü | , | . | P | Y | F | G | C | T | Z | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | TAB | A | O | E | I | U | H | D | R | N | S | L | - |------+------+------+------+------+------|------+------+------+------+------+------| - | Shift| Ä | Ö | Q | J | K | X | B | M | W | V |Enter | - |------+------+------+------+------+------+------+------+------+------+------+------| - | CTRL | OS | Alt | MO(3)|Lower | Space |Raise | Left |Right | Up |Down | - `-----------------------------------------------------------------------------------' -``` - -## Lower -``` -,-----------------------------------------------------------------------------------. - | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | ? | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | Next | Vol- | Vol+ | Play | - `-----------------------------------------------------------------------------------' -``` - -## Raise -``` -,-----------------------------------------------------------------------------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - |------+------+------+------+------+-------------+------+------+------+------+------| - | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | / | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | Next | Vol- | Vol+ | Play | - `-----------------------------------------------------------------------------------' -``` - -## Adjust (MO(3)) -``` - ,-----------------------------------------------------------------------------------. - | | HOME | UP | END | | | | | | | | Del | - |------+------+------+------+------+-------------+------+------+------+------+------| - | | LEFT | DOWN | RIGHT| | | | | | | | | - |------+------+------+------+------+------|------+------+------+------+------+------| - | | | | | | | | | | | | | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | | | | | | | | | | | - `-----------------------------------------------------------------------------------' -``` \ No newline at end of file diff --git a/keyboards/contra/keymaps/default/config.h b/keyboards/contra/keymaps/default/config.h deleted file mode 100644 index d61ee2938e9..00000000000 --- a/keyboards/contra/keymaps/default/config.h +++ /dev/null @@ -1,38 +0,0 @@ -#pragma once - - -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif - -#define MUSIC_MASK (keycode != KC_NO) - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 diff --git a/keyboards/contra/keymaps/default/keymap.c b/keyboards/contra/keymaps/default/keymap.c deleted file mode 100644 index c63bcc0945d..00000000000 --- a/keyboards/contra/keymaps/default/keymap.c +++ /dev/null @@ -1,263 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -enum planck_layers { - _QWERTY, - _COLEMAK, - _DVORAK, - _LOWER, - _RAISE, - _PLOVER, - _ADJUST -}; - -enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - PLOVER, - LOWER, - RAISE, - BACKLIT, - EXT_PLV -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = LAYOUT_planck_mit( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - /* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_COLEMAK] = LAYOUT_planck_mit( - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - /* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_DVORAK] = LAYOUT_planck_mit( - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = LAYOUT_planck_mit( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = LAYOUT_planck_mit( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY - ), - - /* Plover layer (http://opensteno.org) - * ,-----------------------------------------------------------------------------------. - * | # | # | # | # | # | # | # | # | # | # | # | # | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | S | T | P | H | * | * | F | P | L | T | D | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | S | K | W | R | * | * | R | B | G | S | Z | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Exit | | | A | O | | E | U | | | | - * `-----------------------------------------------------------------------------------' - */ - - [_PLOVER] = LAYOUT_planck_mit( - KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , - XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, - XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = LAYOUT_planck_mit( - _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) - -}; - - -#ifdef AUDIO_ENABLE - float plover_song[][2] = SONG(PLOVER_SOUND); - float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); -#endif - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - print("mode just switched to qwerty and this is a huge string\n"); - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - PORTE &= ~(1<<6); - } else { - unregister_code(KC_RSFT); - PORTE |= (1<<6); - } - return false; - break; - case PLOVER: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - stop_all_notes(); - PLAY_SONG(plover_song); - #endif - layer_off(_RAISE); - layer_off(_LOWER); - layer_off(_ADJUST); - layer_on(_PLOVER); - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - keymap_config.raw = eeconfig_read_keymap(); - keymap_config.nkro = 1; - eeconfig_update_keymap(keymap_config.raw); - } - return false; - break; - case EXT_PLV: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(plover_gb_song); - #endif - layer_off(_PLOVER); - } - return false; - break; - } - return true; -} diff --git a/keyboards/contra/keymaps/default/readme.md b/keyboards/contra/keymaps/default/readme.md deleted file mode 100644 index 80aba109548..00000000000 --- a/keyboards/contra/keymaps/default/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The Default Contra Layout - diff --git a/keyboards/contra/keymaps/erovia/config.h b/keyboards/contra/keymaps/erovia/config.h deleted file mode 100644 index 11d6a2c1ae5..00000000000 --- a/keyboards/contra/keymaps/erovia/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#pragma once - -#define AUTO_SHIFT_TIMEOUT 150 -#define NO_AUTO_SHIFT_SPECIAL -#define NO_AUTO_SHIFT_NUMERIC - -#define TAPPING_TERM 200 diff --git a/keyboards/contra/keymaps/erovia/keymap.c b/keyboards/contra/keymaps/erovia/keymap.c deleted file mode 100644 index 9b72e573327..00000000000 --- a/keyboards/contra/keymaps/erovia/keymap.c +++ /dev/null @@ -1,163 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -enum planck_layers { - _QWERTY, - _COLEMAK, - _LOWER, - _RAISE, - _ADJUST -}; - -enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - LOWER, - RAISE -}; - -enum { - TD_SPACE_CADET_SHIFT = 0, - TD_SPACE_CADET_ENTER = 1 -}; - -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_SPACE_CADET_SHIFT] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_LPRN), - [TD_SPACE_CADET_ENTER] = ACTION_TAP_DANCE_DOUBLE(KC_ENT, KC_RPRN) -}; - -#define TD_SHFT TD(TD_SPACE_CADET_SHIFT) -#define TD_ENTR TD(TD_SPACE_CADET_ENTER) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | GUI |Lower | Tab |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT_ortho_4x12( - KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - TD_SHFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TD_ENTR, - KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI, LOWER, KC_TAB, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | ` | Q | W | F | P | B | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Ctrl | A | R | S | T | G | M | N | E | I | O | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | D | V | K | H | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | GUI |Lower | Tab |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT_ortho_4x12( - KC_GRV, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - TD(TD_SPACE_CADET_SHIFT), KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, TD(TD_SPACE_CADET_ENTER), - KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI, LOWER, KC_TAB, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT -), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT_ortho_4x12( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Prev | Vol- | Mute | Stop | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT_ortho_4x12( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MUTE, KC_MSTP -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | |Qwerty|Colemk| | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | AuSh | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = LAYOUT_ortho_4x12( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ASTG -) - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/contra/keymaps/erovia/readme.md b/keyboards/contra/keymaps/erovia/readme.md deleted file mode 100644 index 34cbdf0a18c..00000000000 --- a/keyboards/contra/keymaps/erovia/readme.md +++ /dev/null @@ -1,76 +0,0 @@ -# Erovia's Contra Keymap - -My personal Contra keymap based on the *basic* keymap. - -**Features** - -* Qwerty and Colemak Mod-DH support -* autoshifting -* double tap LSHIFT and ENTER for quick access to ( and ) - -## QWERTY (Normal) Layer -``` -,-----------------------------------------------------------------------------------. -| ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | -|------+------+------+------+------+-------------+------+------+------+------+------| -| Esc | A | S | D | F | G | H | J | K | L | ; | ' | -|------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | -|------+------+------+------+------+------+------+------+------+------+------+------| -| Ctrl | GUI | Alt | GUI |Lower | Tab |Space |Raise | Left | Down | Up |Right | -`-----------------------------------------------------------------------------------' -``` - -## Colemak Layer -Switch from `Adjust` layer. -``` -,-----------------------------------------------------------------------------------. -| ` | Q | W | F | P | B | J | L | U | Y | ; | Bksp | -|------+------+------+------+------+-------------+------+------+------+------+------| -| Ctrl | A | R | S | T | G | M | N | E | I | O | ' | -|------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| Z | X | C | D | V | K | H | , | . | / |Enter | -|------+------+------+------+------+------+------+------+------+------+------+------| -| Ctrl | GUI | Alt | GUI |Lower | Tab |Space |Raise | Left | Down | Up |Right | -`-----------------------------------------------------------------------------------' -``` - -## Lower -``` -,-----------------------------------------------------------------------------------. -| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | -|------+------+------+------+------+-------------+------+------+------+------+------| -| Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | -|------+------+------+------+------+------|------+------+------+------+------+------| -| | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | -|------+------+------+------+------+------+------+------+------+------+------+------| -| | | | | | | | Next | Vol- | Vol+ | Play | -`-----------------------------------------------------------------------------------' -``` - -## Raise -``` -,-----------------------------------------------------------------------------------. -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | -|------+------+------+------+------+-------------+------+------+------+------+------| -| Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | -|------+------+------+------+------+------|------+------+------+------+------+------| -| | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | -|------+------+------+------+------+------+------+------+------+------+------+------| -| | | | | | | | Prev | Vol- | Mute | Stop | -`-----------------------------------------------------------------------------------' -``` - -## Adjust -`AuSh` toggles autoshifting. -``` -,-----------------------------------------------------------------------------------. -| | | | | | | | | | | | | -|------+------+------+------+------+-------------+------+------+------+------+------| -| | | | | | | |Qwerty|Colemk| | | | -|------+------+------+------+------+------|------+------+------+------+------+------| -| | | | | | | | | | | | | -|------+------+------+------+------+------+------+------+------+------+------+------| -| | | | | | | | | | | AuSh | -`-----------------------------------------------------------------------------------' -``` diff --git a/keyboards/contra/keymaps/erovia/rules.mk b/keyboards/contra/keymaps/erovia/rules.mk deleted file mode 100755 index 97999d9cb05..00000000000 --- a/keyboards/contra/keymaps/erovia/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -AUTO_SHIFT_ENABLE = yes -TAP_DANCE_ENABLE = yes diff --git a/keyboards/contra/keymaps/losinggeneration/README.md b/keyboards/contra/keymaps/losinggeneration/README.md deleted file mode 100644 index affd2fb9b41..00000000000 --- a/keyboards/contra/keymaps/losinggeneration/README.md +++ /dev/null @@ -1,30 +0,0 @@ -losinggeneration's Contra Layout -============================ - -This build uses the MIT layout. - -See description of the layout in the common folder -[here](../../../../users/losinggeneration/README.md) - -## Features -- Adjust - - Removed AGSwap, AGNorm, & Del - - Added Caps Lock, F1-F12 in a 4x3 grid, arrow cluster, - and layer transitions to the new layers. - - Moved Reset & Audio control to the right side - -## Layouts - -### Adjust (Lower + Raise) - -``` - ,-----------------------------------------------------------------------------------. - | | F1 | F2 | F3 | F4 | | RESET| Game |Numpad|Mouse | |Sleep | - |------+------+------+------+------+------+------+------+------+------+------+------| - | | F5 | F6 | F7 | F8 | | |Qwerty|Colmak|Workmn|Dvorak| | - |------+------+------+------+------+------+------+------+------+------+------+------| - | CAPS | F9 | F10 | F11 | F12 | | | | | | Up | | - |------+------+------+------+------+-------------+------+------+------+------+------| - | | | | | | | | XXX | Left | Down |Right | - `-----------------------------------------------------------------------------------' -``` diff --git a/keyboards/contra/keymaps/losinggeneration/config.h b/keyboards/contra/keymaps/losinggeneration/config.h deleted file mode 100644 index 759b1d9a000..00000000000 --- a/keyboards/contra/keymaps/losinggeneration/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* -Copyright 2017 Danny Nguyen -Copyright 2018 Harley Laue - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -long with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H -#define USE_MIT_LAYOUT - -#define TAPPING_TERM 250 - -#endif diff --git a/keyboards/contra/keymaps/losinggeneration/keymap.c b/keyboards/contra/keymaps/losinggeneration/keymap.c deleted file mode 100644 index d4a336c3382..00000000000 --- a/keyboards/contra/keymaps/losinggeneration/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -#include QMK_KEYBOARD_H -#include "losinggeneration-config.h" -#include "losinggeneration-keymap.h" - -extern keymap_config_t keymap_config; - -#define MT_CAPS LSFT_T(KC_CAPS) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[_QWERTY] = CATMAP( QWERTY_LAYER ), -[_COLEMAK] = CATMAP( COLEMAK_LAYER ), -[_WORKMAN] = CATMAP( WORKMAN_LAYER ), -[_DVORAK] = CATMAP( DVORAK_LAYER ), -[_GAME] = CATMAP( GAME_LAYER ), -[_NUMPAD] = CATMAP( NUMPAD_LAYER ), -[_MOUSE] = CATMAP( MOUSE_LAYER ), -[_LOWER] = CATMAP( LOWER_LAYER ), -[_RAISE] = CATMAP( RAISE_LAYER ), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | | RESET| Game |Numpad|Mouse | |Sleep | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | F5 | F6 | F7 | F8 | | |Qwerty|Colmak|Workmn|Dvorak| | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | CAPS | F9 | F10 | F11 | F12 | | | | | | Up | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | XXX | Left | Down |Right | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = CATMAP( \ - _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , _______, RESET , TO_GAME, TO_NUM , TO_MS , _______, KC_SLEP, \ - _______, KC_F5 , KC_F6 , KC_F7 , KC_F8 , _______, _______, QWERTY , COLEMAK, WORKMAN, DVORAK , _______, \ - MT_CAPS, KC_F9 , KC_F10, KC_F11 , KC_F12 , _______, _______, _______, _______, _______, KC_UP , _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT \ -) - -}; - diff --git a/keyboards/contra/keymaps/losinggeneration/rules.mk b/keyboards/contra/keymaps/losinggeneration/rules.mk deleted file mode 100644 index 17ef684830f..00000000000 --- a/keyboards/contra/keymaps/losinggeneration/rules.mk +++ /dev/null @@ -1,14 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -AUDIO_ENABLE = no # Audio output on port C6 -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -COMMAND_ENABLE = no # Commands for debug and configuration -CONSOLE_ENABLE = no # Console for debug(+400) -MIDI_ENABLE = no # MIDI controls -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - diff --git a/keyboards/contra/keymaps/maxr1998/config.h b/keyboards/contra/keymaps/maxr1998/config.h deleted file mode 100644 index b384a2fd34a..00000000000 --- a/keyboards/contra/keymaps/maxr1998/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -#define TAPPING_TOGGLE 2 - -#define RGB_DI_PIN F7 // pin the DI on the WS2812B is hooked-up to -#define RGBLIGHT_ANIMATIONS // run RGB animations -#define RGBLED_NUM 12 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) - -#endif diff --git a/keyboards/contra/keymaps/maxr1998/keymap.c b/keyboards/contra/keymaps/maxr1998/keymap.c deleted file mode 100644 index 326d5876d0d..00000000000 --- a/keyboards/contra/keymaps/maxr1998/keymap.c +++ /dev/null @@ -1,185 +0,0 @@ -/* Copyright 2015-2017 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "contra.h" -#include "keymap_german.h" - -enum contra_layers { - _QWERTZ, - _FN, - _NR, - _NR_L3, - _FX, - _GAMING -}; - -#define KC_I3 LM(_NR, MOD_LALT) -#define KC_NR SAFE_RANGE -#define KC_N3 (SAFE_RANGE + 1) -#define KC_FN MO(_FN) -#define G_1 TO(_GAMING) -#define G_0 TG(_GAMING) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwertz - * ,-----------------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Z | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | +* ~ | Enter| - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Y | X | C | V | B | N | M | , | . | Up | Shift| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Sup | Alt | i3 | NumR | Space | Spec | Fun | Left | Down | Right| - * `-----------------------------------------------------------------------------------' - */ -[_QWERTZ] = { - {KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_PLUS, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT}, - {KC_LCTL, KC_LGUI, KC_LALT, KC_I3, KC_NR, KC_SPC, KC_SPC, KC_N3, KC_FN, KC_LEFT, KC_DOWN, KC_RGHT} -}, - -/* Function layer - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | Ü | | Ö | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Lock | Ä | ß | | | GAME | | RGBS | RGBB | RGBS | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | RGBH-| RGBT | RGBH+| PgUp | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | ---- | ---- | | ---- | ---- | Home | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ -[_FN] = { - {_______, _______, _______, _______, _______, _______, _______, DE_UE, _______, DE_OE, _______, KC_DEL }, - {KC_LOCK, DE_AE, DE_SS, _______, _______, G_1, _______, RGB_M_P, RGB_M_B, RGB_M_SW,_______, _______}, - {_______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_TOG, RGB_HUI, KC_PGUP, _______}, - {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_END } -}, - -/* Numrow layer (special characters with Shift and ISO_L3_Shift) - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | \ | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | #' | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | <> | | | | | | | | | | -_ | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | ---- | ---- | | ---- | ---- | | | | - * `-----------------------------------------------------------------------------------' - */ -[_NR] = { - {_______, DE_1, DE_2, DE_3, DE_4, DE_5, DE_6, DE_7, DE_8, DE_9, DE_0, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DE_HASH, _______}, - {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______}, - {_______, _______, _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, _______, _______, _______} -}, -[_NR_L3] = { - {_______, DE_1, DE_2, DE_3, DE_4, DE_5, DE_6, DE_7, DE_8, DE_9, DE_0, DE_SS }, - {_______, DE_Q, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______}, - {_______, _______, _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, _______, _______, _______} -}, - -/* Function keys - * ,-----------------------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_FX] = { - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, _______, _______, _______} -}, - -/* Gaming - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Space| | | | | | | Leave| | | | - * `-----------------------------------------------------------------------------------' - */ -[_GAMING] = { - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {KC_SPC, XXXXXXX, _______, _______, _______, _______, _______, _______, G_0, _______, _______, _______} -} -}; - -void update_tri_layer_user(void); - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - case KC_BSPC: - if (record->event.pressed) { - if (get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT))) { - register_code(DE_SS); - return false; - } - } else { - unregister_code(DE_SS); - } - return true; - case KC_NR: - if (record->event.pressed) { - layer_on(_NR); - } else { - layer_off(_NR); - } - update_tri_layer_user(); - return false; - case KC_N3: - if (record->event.pressed) { - layer_on(_NR_L3); - } else { - layer_off(_NR_L3); - } - update_tri_layer_user(); - return false; - default: - return true; - } -} - -void update_tri_layer_user(void) { - update_tri_layer(_NR, _NR_L3, _FX); - if (layer_state_is(_NR_L3) && !layer_state_is(_FX)) { - register_code(KC_ALGR); - } else { - unregister_code(KC_ALGR); - } -} - -void led_set_user(uint8_t usb_led) { - // Force-enable Numlock - if (!(usb_led & (1<event.pressed) { - // print("mode just switched to qwerty and this is a huge string\n"); - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/contra/keymaps/msiu/readme.md b/keyboards/contra/keymaps/msiu/readme.md deleted file mode 100644 index 80aba109548..00000000000 --- a/keyboards/contra/keymaps/msiu/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The Default Contra Layout - diff --git a/keyboards/contra/keymaps/ryanm101/config.h b/keyboards/contra/keymaps/ryanm101/config.h deleted file mode 100644 index 224a4a37d09..00000000000 --- a/keyboards/contra/keymaps/ryanm101/config.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -#define TAPPING_TERM 200 - -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif - -#define MUSIC_MASK (keycode != KC_NO) - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - -#endif diff --git a/keyboards/contra/keymaps/ryanm101/keymap.c b/keyboards/contra/keymaps/ryanm101/keymap.c deleted file mode 100644 index 721a9a06eaf..00000000000 --- a/keyboards/contra/keymaps/ryanm101/keymap.c +++ /dev/null @@ -1,259 +0,0 @@ -#include "contra.h" -#include "action_layer.h" - -extern keymap_config_t keymap_config; - -// Custom Key Combos -#define LCKSCR LCTL(LGUI(KC_Q)) -//#define KC_CAD LCTL(LALT(KC_DEL)) // CTL+ALT+DEL (windows) -//#define KC_CAE LGUI(LALT(KC_ESC)) // CMD+ALT+ESC (Force Close) -//#define KC_SCREENSHOT LGUI(S(KC_4)) // CMD+SHIFT+4 (Mac Screenshot) - -#define _QWERTY 0 -#define _QWERTYMAC 1 -#define _L1 2 -#define _L2 3 -#define _L3 4 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - QWERTYMAC, - L1, - L2, - L3 -}; - -//Tap Dance Declarations -#define COLON TD(CLN) -#define QUOTE TD(QUOT) -#define PARAN TD(PAR) -#define CURLY TD(CUR) -#define SQUAR TD(SQU) -#define ANGUL TD(ANG) -#define TMUX TD(TD_TMUX) -#define CADCAE TD(CAD_CAE) -#define SHIFTSLASHPIPE TD(TD_SHIFTSLASHPIPE) - -enum { - CLN = 0, - QUOT, - CAD_CAE, - PAR, - CUR, - SQU, - ANG, - TD_TMUX, - TD_SHIFTSLASHPIPE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ;: | '@ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | ,< | .> | /? |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | \| | L1 | | | L2 | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = LAYOUT_ortho_4x12( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, COLON, QUOTE, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_LCTL, KC_LGUI, KC_LALT, KC_NUBS, MO(_L1), XXXXXXX, KC_SPC, MO(_L2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - /* QwertyMAC - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ;: | '@ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | ,< | .> | /? |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Alt | GUI | \| | L1 | | | L2 | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTYMAC] = LAYOUT_ortho_4x12( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, COLON, QUOTE, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_LCTL, KC_LALT, KC_LGUI, KC_NUBS, MO(_L1), XXXXXXX, KC_SPC, MO(_L2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT - ), - - /* L1 - * ,-----------------------------------------------------------------------------------. - * | `¬ |INSERT| PGUP | HOME | <> | | () | 7& | 8* | 9( | | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | |DELETE| PGDN | END | [] | {} | =+ | 4$ | 5% | 6^ | * | LMAC | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * |LSHIFT|PSCRN | |CADCAE| L3 |LCKSCR| -_ | 1! | 2" | 3£ | /? |ENTER | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | #~ | | | | | 0) | .> | | MENU | - * `-----------------------------------------------------------------------------------' - */ - [_L1] = LAYOUT_ortho_4x12( - KC_GRV, KC_INS, KC_PGUP, KC_HOME, ANGUL, XXXXXXX, PARAN, KC_7, KC_8, KC_9, XXXXXXX, KC_BSPC, - XXXXXXX, KC_DEL, KC_PGDN, KC_END, SQUAR, CURLY, KC_EQL, KC_4, KC_5, KC_6, S(KC_8), TG(_QWERTYMAC), - _______, KC_PSCR, XXXXXXX, CADCAE, MO(_L3), LCKSCR, KC_MINS, KC_1, KC_2, KC_3, KC_SLSH, KC_ENT, - _______, _______, _______, KC_NUHS, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_0, ALGR_T(KC_DOT), XXXXXXX, KC_MENU - ), - - /* L2 - * ,-----------------------------------------------------------------------------------. - * |Sysreq| F9 | F10 | F11 | F12 | |NUMLK | 7 | 8 | 9 | * |Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F5 | F6 | F7 | F8 | | | 4 | 5 | 6 | / | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | | | 1 | 2 | 3 | + |KP_ENT| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | | | | | | 0 | . | - | | - * `-----------------------------------------------------------------------------------' - */ - [_L2] = LAYOUT_ortho_4x12( - KC_SYSREQ, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_PAST, KC_BSPC, - XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PSLS, _______, - XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PENT, - _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, KC_P0, KC_PDOT, KC_PMNS, _______ - ), - - /* L3 - * ,-----------------------------------------------------------------------------------. - * |RGBTOG|RGBHUI|RGBHUD|RGBSAI|RGBSAD| | | PGDN | PGUP | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * |BLTOG |BLSTEP|RGBVAI|RGBVAD|RGBMOD|RGBRMD| Left | Down | Up | Right| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | TMUX | | | | | | | | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_L3] = LAYOUT_ortho_4x12( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, - TMUX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ENT, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ) - -}; - -// Parantheses -void paranthesis_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - SEND_STRING("()"); register_code(KC_LEFT); unregister_code(KC_LEFT); - } else if (state->count == 2) { - SEND_STRING("("); - } else if (state->count == 3) { - SEND_STRING(")"); - } -} - -void curly_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - SEND_STRING("{}"); register_code(KC_LEFT); unregister_code(KC_LEFT); - } else if (state->count == 2) { - SEND_STRING("{"); - } else if (state->count == 3) { - SEND_STRING("}"); - } -} - -void square_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - SEND_STRING("[]"); register_code(KC_LEFT); unregister_code(KC_LEFT); - } else if (state->count == 2) { - SEND_STRING("["); - } else if (state->count == 3) { - SEND_STRING("]"); - } -} - -void angular_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - SEND_STRING("<>"); register_code(KC_LEFT); unregister_code(KC_LEFT); - } else if (state->count == 2) { - SEND_STRING("<"); - } else if (state->count == 3) { - SEND_STRING(">"); - } -} - -void tmux_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - SEND_STRING("tmux"); register_code(KC_ENT); unregister_code(KC_ENT); - } else if (state->count == 2) { - register_mods(MOD_BIT(KC_LCTRL)); - register_code(KC_B); unregister_code(KC_B); - unregister_mods(MOD_BIT(KC_LCTRL)); - register_mods(MOD_BIT(KC_LSHIFT)); - register_code(KC_5); unregister_code(KC_5); - unregister_mods(MOD_BIT(KC_LSHIFT)); - } -} - -void cmd_dance (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_mods(MOD_BIT(KC_LCTRL)); - register_mods(MOD_BIT(KC_LALT)); - register_code(KC_DELETE); - unregister_mods(MOD_BIT(KC_LCTRL)); - unregister_mods(MOD_BIT(KC_LALT)); - unregister_code(KC_DELETE); - } else if (state->count == 2) { - register_mods(MOD_BIT(KC_LGUI)); - register_mods(MOD_BIT(KC_LALT)); - register_code(KC_ESC); - unregister_mods(MOD_BIT(KC_LGUI)); - unregister_mods(MOD_BIT(KC_LALT)); - unregister_code(KC_ESC); - } else if (state->count == 3) { - register_mods(MOD_BIT(KC_LGUI)); - register_mods(MOD_BIT(KC_LSHIFT)); - register_code(KC_4); - unregister_mods(MOD_BIT(KC_LGUI)); - unregister_mods(MOD_BIT(KC_LSHIFT)); - unregister_code(KC_4); - } -} - -void cmd_sft_slash_pipe_down (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->interrupted || state->pressed==0) { - register_code (KC_NONUS_BSLASH); - } else { - register_code (KC_LSFT); - } - } else if (state->count == 2) { - register_mods(MOD_BIT(KC_LSFT)); - register_code(KC_NONUS_BSLASH); - } -} - -void cmd_sft_slash_pipe_up (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT)) { - unregister_code (KC_LSFT); - } else { - unregister_code (KC_NONUS_BSLASH); - } - } else if (state->count == 2) { - unregister_mods(MOD_BIT(KC_LSFT)); - unregister_code(KC_NONUS_BSLASH); - } -} - - //All tap dance functions would go here. Only showing this one. - qk_tap_dance_action_t tap_dance_actions[] = { - [CLN] = ACTION_TAP_DANCE_DOUBLE (KC_SCLN, S(KC_SCLN )) - ,[QUOT] = ACTION_TAP_DANCE_DOUBLE (KC_QUOT, S(KC_2)) - ,[CAD_CAE] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, cmd_dance ) - ,[PAR] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, paranthesis_dance ) - ,[CUR] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, curly_dance ) - ,[SQU] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, square_dance ) - ,[ANG] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, angular_dance ) - ,[TD_TMUX] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, NULL, tmux_dance ) - ,[TD_SHIFTSLASHPIPE] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, cmd_sft_slash_pipe_down, cmd_sft_slash_pipe_up) - }; diff --git a/keyboards/contra/keymaps/ryanm101/readme.md b/keyboards/contra/keymaps/ryanm101/readme.md deleted file mode 100644 index a289eefcb75..00000000000 --- a/keyboards/contra/keymaps/ryanm101/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -# Layout Info -Map is from my JJ40 but Contra has been done with a grid vs my JJ's MIT layout. Map will be updated as soon as i figure out what to do with the addional key. - -- Uses non-US keys -- Keymap can be seen: Keymap -> http://www.keyboard-layout-editor.com/#/gists/7d111d72b138c3ef03ea4ffac4ddb7e4 - -# Notes - -- .> on lower layer if tapped but ALTGR if held -- RAISE -> uses TT() so tap to enter (NUMPAD Usage) or hold for momentary (F Keys) -- LOWER on _RAISE goes straight to qwerty layout (Base layer) diff --git a/keyboards/contra/keymaps/ryanm101/rules.mk b/keyboards/contra/keymaps/ryanm101/rules.mk deleted file mode 100644 index f5e8c3d6dc8..00000000000 --- a/keyboards/contra/keymaps/ryanm101/rules.mk +++ /dev/null @@ -1 +0,0 @@ -TAP_DANCE_ENABLE=yes \ No newline at end of file diff --git a/keyboards/contra/readme.md b/keyboards/contra/readme.md deleted file mode 100644 index f16598581ec..00000000000 --- a/keyboards/contra/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -CONTRA -=== - -![CONTRA](https://cartel.ltd/wp-content/uploads/2018/01/img_3209.jpg) - -A 40% keyboard by [CARTEL](https://cartel.ltd/) - -Keyboard Maintainer: The QMK Community -Hardware Supported: CONTRA -Hardware Availability: [CARTEL](https://cartel.ltd/projects/contra/) - -Make example for this keyboard (after setting up your build environment): - - make contra:dana - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk deleted file mode 100755 index 3a97834cff1..00000000000 --- a/keyboards/contra/rules.mk +++ /dev/null @@ -1,61 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = planck_mit ortho_4x12 -LAYOUTS_HAS_RGB = no diff --git a/keyboards/converter/adb_usb/README.md b/keyboards/converter/adb_usb/README.md deleted file mode 100644 index 8de9b9ad46d..00000000000 --- a/keyboards/converter/adb_usb/README.md +++ /dev/null @@ -1,84 +0,0 @@ -ADB-to-USB Keyboard Converter -============================= -This firmware converts Apple Desktop Bus (ADB) keyboard protocol to USB so that you can use an ADB keyboard on a modern computer. It works on the PJRC Teensy 2.0 and other USB AVR MCUs (ATMega32U4, AT90USB64/128, etc) and needs at least 10KB of flash memory. - - -This is a port of the TMK ADB-to-USB converter to QMK. For information on QMK, please consult the following: -https://github.com/qmk/qmk_firmware -https://docs.qmk.fm - - -Wiring ------- -Connect the VCC, GND, and DATA lines of the ADB keyboard to the controller (Teensy 2.0 or similar). By default the DATA line uses port PD0. The Power SW line is unused by the converter. - -ADB female socket from the front: - - ,--_--. - / o4 3o \ 1: DATA - | o2 1o | 2: Power SW - - === - 3: VCC - `-___-' 4: GND - -This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. Using an external pull-up resistor (1K-10K Ohm) between the DATA and VCC lines is strongly recommended. - -Pull-up resistor: - - Keyboard Converter - ,------. - 5V------+------|VCC | - | | | - [R] | | - | | | - Signal--+------|PD0 | - | | - GND------------|GND | - `------' - R: 1K Ohm resistor - - -Define following macros for ADB connection in config.h if you use other than port PD0. - - ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT - - -Building the Firmware ------------------------------------------- -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - - -Keymap ------- -To build the default keymap run this command: - - $ make converter/adb_usb:default - -You may add your own keymap to the converter/adb_usb/keymaps directory, as you would with any other QMK-powered keyboard. - -To build your custom keymap, change the build command to: - - $ make converter/adb_usb:my_keymap - -Where 'my_keymap' is the name of your custom keymap directory. - - -Locking Caps Lock ----------------- -Many old ADB keyboards use a locking switch for the caps lock key. This converter supports the locking caps lock key by default. - - -Notes ------ -Non-extended ADB keyboards make no distinction between the left and right modifiers, -i.e. the keycode for the left modifier will be sent even if the right modifier - -The Apple Extended Keyboard and Apple Extended Keyboard II can differentiate between the left and right modifiers except for the GUI key (Windows/Command). - -Most ADB keyboards have no diodes in its matrix so they are not NKRO, -though the ADB protocol itself supports it. See protocol/adb.c for more info. - - -QMK Port Changelog ---------- -- 2018/09/16 - Initial release. -- 2018/12/23 - Fixed lock LED support. diff --git a/keyboards/converter/adb_usb/adb_usb.c b/keyboards/converter/adb_usb/adb_usb.c deleted file mode 100644 index 7026d62751b..00000000000 --- a/keyboards/converter/adb_usb/adb_usb.c +++ /dev/null @@ -1,3 +0,0 @@ -#include "adb_usb.h" -#include -#include "quantum.h" diff --git a/keyboards/converter/adb_usb/adb_usb.h b/keyboards/converter/adb_usb/adb_usb.h deleted file mode 100644 index 8691adcc65e..00000000000 --- a/keyboards/converter/adb_usb/adb_usb.h +++ /dev/null @@ -1,109 +0,0 @@ -/* -Copyright 2011,2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Ported to QMK by Peter Roe -*/ - -#ifndef ADB_USB_H -#define ADB_USB_H - -#include "quantum.h" - -/* M0115/M3501 Apple Extended Keyboard ANSI - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr| - * `---' `---------------' `---------------' `---------------' `-----------' `---' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -| - * |-----------------------------------------------------------| `-----------' |---------------| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +| - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Opt |Cmd | Space | |Opt |Ctrl | |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ -#define LAYOUT_ext_ansi( \ - K35, K7A,K78,K63,K76,K60,K61,K62,K64,K65,K6D,K67,K6F, K69,K6B,K71, K7F, \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K72,K73,K74, K47,K51,K4B,K43, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K75,K77,K79, K59,K5B,K5C,K4E, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K45, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K7B, K3E, K53,K54,K55, \ - K36,K3A,K37, K31, K7C,K7D, K3B,K3D,K3C, K52, K41,K4C \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, KC_NO, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, KC_NO, K35, K36, K37 }, \ - { K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO, }, \ - { KC_NO, K41, KC_NO, K43, KC_NO, K45, KC_NO, K47 }, \ - { KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, K4E, KC_NO, }, \ - { KC_NO, KC_NO, K52, K53, K54, K55, K56, K57 }, \ - { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO, }, \ - { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ - { KC_NO, K69, KC_NO, K6B, KC_NO, K6D, KC_NO, K6F }, \ - { KC_NO, K71, K72, K73, K74, K75, K76, K77 }, \ - { K78, K79, K7A, K7B, K7C, K7D, KC_NO, K7F } \ -} - -/* M0116 Apple Standard Keyboard ANSI - * +-------+ - * | power | - * +-------+ - * +---+---+---+---+---+---+---+---+---+---+---+---+---+-----+ +---+---+---+---+ - * |esc| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | bks | |clr| = | / | * | - * +---------------------------------------------------------+ +---+---+---+---+ - * | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | | | 7 | 8 | 9 | + | - * +-----------------------------------------------------+ | +---+---+---+---+ - * | ctrl | a | s | d | f | g | h | j | k | l | ; | ' |return| | 4 | 5 | 6 | - | - * +---------------------------------------------------------+ +---+---+---+---+ - * | shift | z | x | c | v | b | n | m | , | . | / | shift | | 1 | 2 | 3 | | - * +---------------------------------------------------------+ +-------+---|ent| - * |cap|opt|comnd| ` | | \ |lef|rig|dwn|up | | 0 | . | | - * +---------------------------------------------------------+ +-------+---+---+ - */ -#define LAYOUT_m0116_ansi( \ - K7F, \ - K35,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K51,K4B,K43, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K45, \ - K36,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K4E, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K7B, K53,K54,K55, \ - K39,K3A,K37,K32, K31, K2A,K3B,K3C,K3D,K3E, K52, K41,K4C \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, KC_NO, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, KC_NO, K35, K36, K37 }, \ - { K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO }, \ - { KC_NO, K41, KC_NO, K43, KC_NO, K45, KC_NO, K47 }, \ - { KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, K4E, KC_NO }, \ - { KC_NO, K51, K52, K53, K54, K55, K56, K57 }, \ - { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, K7B, KC_NO, KC_NO, KC_NO, K7F } \ -} - -#endif diff --git a/keyboards/converter/adb_usb/config.h b/keyboards/converter/adb_usb/config.h deleted file mode 100644 index a5845a02904..00000000000 --- a/keyboards/converter/adb_usb/config.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Ported to QMK by Peter Roe -*/ - -#pragma once - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0ADB -#define DEVICE_VER 0x0101 -#define MANUFACTURER QMK -#define PRODUCT ADB keyboard converter -#define DESCRIPTION Convert ADB keyboard to USB - -/* matrix size */ -#define MATRIX_ROWS 16 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* ADB port setting */ -#define ADB_PORT PORTD -#define ADB_PIN PIND -#define ADB_DDR DDRD -#define ADB_DATA_BIT 0 -//#define ADB_PSW_BIT 1 // optional diff --git a/keyboards/converter/adb_usb/info.json b/keyboards/converter/adb_usb/info.json deleted file mode 100644 index e06f9c1adb6..00000000000 --- a/keyboards/converter/adb_usb/info.json +++ /dev/null @@ -1,204 +0,0 @@ -{ - "keyboard_name": "ADB to USB Keyboard Converter", - "url": "", - "maintainer": "qmk", - "width": 22.5, - "height": 7, - "layouts": { - "LAYOUT_ext_ansi": { - "layout": [ - {"label":"Escape", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"Eject", "x":21.5, "y":0}, - {"label":"`", "x":0, "y":2}, - {"label":"1", "x":1, "y":2}, - {"label":"2", "x":2, "y":2}, - {"label":"3", "x":3, "y":2}, - {"label":"4", "x":4, "y":2}, - {"label":"5", "x":5, "y":2}, - {"label":"6", "x":6, "y":2}, - {"label":"7", "x":7, "y":2}, - {"label":"8", "x":8, "y":2}, - {"label":"9", "x":9, "y":2}, - {"label":"0", "x":10, "y":2}, - {"label":"-", "x":11, "y":2}, - {"label":"=", "x":12, "y":2}, - {"label":"Backspace", "x":13, "y":2, "w":2}, - {"label":"Insert", "x":15.25, "y":2}, - {"label":"Home", "x":16.25, "y":2}, - {"label":"Page Up", "x":17.25, "y":2}, - {"label":"Num Lock", "x":18.5, "y":2}, - {"label":"Num =", "x":19.5, "y":2}, - {"label":"Num /", "x":20.5, "y":2}, - {"label":"Num *", "x":21.5, "y":2}, - {"label":"Tab", "x":0, "y":3, "w":1.5}, - {"label":"Q", "x":1.5, "y":3}, - {"label":"W", "x":2.5, "y":3}, - {"label":"E", "x":3.5, "y":3}, - {"label":"R", "x":4.5, "y":3}, - {"label":"T", "x":5.5, "y":3}, - {"label":"Y", "x":6.5, "y":3}, - {"label":"U", "x":7.5, "y":3}, - {"label":"I", "x":8.5, "y":3}, - {"label":"O", "x":9.5, "y":3}, - {"label":"P", "x":10.5, "y":3}, - {"label":"[", "x":11.5, "y":3}, - {"label":"]", "x":12.5, "y":3}, - {"label":"\\", "x":13.5, "y":3, "w":1.5}, - {"label":"Delete", "x":15.25, "y":3}, - {"label":"End", "x":16.25, "y":3}, - {"label":"Page Down", "x":17.25, "y":3}, - {"label":"Num 7", "x":18.5, "y":3}, - {"label":"Num 8", "x":19.5, "y":3}, - {"label":"Num 9", "x":20.5, "y":3}, - {"label":"Num -", "x":21.5, "y":3}, - {"label":"Lcap", "x":0, "y":4, "w":1.75}, - {"label":"A", "x":1.75, "y":4}, - {"label":"S", "x":2.75, "y":4}, - {"label":"D", "x":3.75, "y":4}, - {"label":"F", "x":4.75, "y":4}, - {"label":"G", "x":5.75, "y":4}, - {"label":"H", "x":6.75, "y":4}, - {"label":"J", "x":7.75, "y":4}, - {"label":"K", "x":8.75, "y":4}, - {"label":"L", "x":9.75, "y":4}, - {"label":";", "x":10.75, "y":4}, - {"label":"\"", "x":11.75, "y":4}, - {"label":"Enter", "x":12.75, "y":4, "w":2.25}, - {"label":"Num 4", "x":18.5, "y":4}, - {"label":"Num 5", "x":19.5, "y":4}, - {"label":"Num 6", "x":20.5, "y":4}, - {"label":"Num +", "x":21.5, "y":4}, - {"label":"Shift", "x":0, "y":5, "w":2.25}, - {"label":"Z", "x":2.25, "y":5}, - {"label":"X", "x":3.25, "y":5}, - {"label":"C", "x":4.25, "y":5}, - {"label":"V", "x":5.25, "y":5}, - {"label":"B", "x":6.25, "y":5}, - {"label":"N", "x":7.25, "y":5}, - {"label":"M", "x":8.25, "y":5}, - {"label":",", "x":9.25, "y":5}, - {"label":".", "x":10.25, "y":5}, - {"label":"/", "x":11.25, "y":5}, - {"label":"Shift", "x":12.25, "y":5, "w":2.75}, - {"label":"Up", "x":16.25, "y":5}, - {"label":"Num 1", "x":18.5, "y":5}, - {"label":"Num 2", "x":19.5, "y":5}, - {"label":"Num 3", "x":20.5, "y":5}, - {"label":"Ctrl", "x":0, "y":6, "w":1.5}, - {"label":"Alt", "x":1.5, "y":6, "w":1.25}, - {"label":"Command", "x":2.75, "y":6, "w":1.5}, - {"label":"Space", "x":4.25, "y":6, "w":6.5}, - {"label":"Alt", "x":12.25, "y":6, "w":1.25}, - {"label":"Ctrl", "x":13.5, "y":6, "w":1.5}, - {"label":"Left", "x":15.25, "y":6}, - {"label":"Down", "x":16.25, "y":6}, - {"label":"Right", "x":17.25, "y":6}, - {"label":"Num 0", "x":18.5, "y":6, "w":2}, - {"label":"Num .", "x":20.5, "y":6}, - {"label":"Num Enter", "x":21.5, "y":5, "h":2} - ] - }, - "LAYOUT_m0116_ansi": { - "width": 19.5, - "height": 6.25, - "layout": [ - {"label":"Power", "x":5, "y":0, "w":2}, - {"label":"Esc", "x":0, "y":1.25}, - {"label":"1", "x":1, "y":1.25}, - {"label":"2", "x":2, "y":1.25}, - {"label":"3", "x":3, "y":1.25}, - {"label":"4", "x":4, "y":1.25}, - {"label":"5", "x":5, "y":1.25}, - {"label":"6", "x":6, "y":1.25}, - {"label":"7", "x":7, "y":1.25}, - {"label":"8", "x":8, "y":1.25}, - {"label":"9", "x":9, "y":1.25}, - {"label":"0", "x":10, "y":1.25}, - {"label":"-", "x":11, "y":1.25}, - {"label":"=", "x":12, "y":1.25}, - {"label":"Delete", "x":13, "y":1.25, "w":1.5}, - {"label":"Clear", "x":15.5, "y":1.25}, - {"label":"Num =", "x":16.5, "y":1.25}, - {"label":"Num /", "x":17.5, "y":1.25}, - {"label":"Num *", "x":18.5, "y":1.25}, - {"label":"Tab", "x":0, "y":2.25, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.25}, - {"label":"W", "x":2.5, "y":2.25}, - {"label":"E", "x":3.5, "y":2.25}, - {"label":"R", "x":4.5, "y":2.25}, - {"label":"T", "x":5.5, "y":2.25}, - {"label":"Y", "x":6.5, "y":2.25}, - {"label":"U", "x":7.5, "y":2.25}, - {"label":"I", "x":8.5, "y":2.25}, - {"label":"O", "x":9.5, "y":2.25}, - {"label":"P", "x":10.5, "y":2.25}, - {"label":"[", "x":11.5, "y":2.25}, - {"label":"]", "x":12.5, "y":2.25}, - {"label":"Num 7", "x":15.5, "y":2.25}, - {"label":"Num 8", "x":16.5, "y":2.25}, - {"label":"Num 9", "x":17.5, "y":2.25}, - {"label":"Num +", "x":18.5, "y":2.25}, - {"label":"Ctrl", "x":0, "y":3.25, "w":1.75}, - {"label":"A", "x":1.75, "y":3.25}, - {"label":"S", "x":2.75, "y":3.25}, - {"label":"D", "x":3.75, "y":3.25}, - {"label":"F", "x":4.75, "y":3.25}, - {"label":"G", "x":5.75, "y":3.25}, - {"label":"H", "x":6.75, "y":3.25}, - {"label":"J", "x":7.75, "y":3.25}, - {"label":"K", "x":8.75, "y":3.25}, - {"label":"L", "x":9.75, "y":3.25}, - {"label":";", "x":10.75, "y":3.25}, - {"label":"'", "x":11.75, "y":3.25}, - {"label":"Return", "x":12.75, "y":3.25, "w":1.75}, - {"label":"Num 4", "x":15.5, "y":3.25}, - {"label":"Num 5", "x":16.5, "y":3.25}, - {"label":"Num 6", "x":17.5, "y":3.25}, - {"label":"Num -", "x":18.5, "y":3.25}, - {"label":"Shift", "x":0, "y":4.25, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.25}, - {"label":"X", "x":3.25, "y":4.25}, - {"label":"C", "x":4.25, "y":4.25}, - {"label":"V", "x":5.25, "y":4.25}, - {"label":"B", "x":6.25, "y":4.25}, - {"label":"N", "x":7.25, "y":4.25}, - {"label":"M", "x":8.25, "y":4.25}, - {"label":",", "x":9.25, "y":4.25}, - {"label":".", "x":10.25, "y":4.25}, - {"label":"/", "x":11.25, "y":4.25}, - {"label":"Shift", "x":12.25, "y":4.25, "w":2.25}, - {"label":"Num 1", "x":15.5, "y":4.25}, - {"label":"Num 2", "x":16.5, "y":4.25}, - {"label":"Num 3", "x":17.5, "y":4.25}, - {"label":"Caps Lock", "x":0, "y":5.25}, - {"label":"Option", "x":1, "y":5.25}, - {"label":"Command", "x":2, "y":5.25, "w":1.75}, - {"label":"`", "x":3.75, "y":5.25}, - {"label":"Space", "x":4.75, "y":5.25, "w":4.75}, - {"label":"\\", "x":9.5, "y":5.25}, - {"label":"Left", "x":10.5, "y":5.25}, - {"label":"Right", "x":11.5, "y":5.25}, - {"label":"Down", "x":12.5, "y":5.25}, - {"label":"Up", "x":13.5, "y":5.25}, - {"label":"Num 0", "x":15.5, "y":5.25, "w":2}, - {"label":"Num .", "x":17.5, "y":5.25}, - {"label":"Num Enter", "x":18.5, "y":4.25, "h":2} - ] - } - } -} diff --git a/keyboards/converter/adb_usb/keymaps/13bit/keymap.c b/keyboards/converter/adb_usb/keymaps/13bit/keymap.c deleted file mode 100644 index 3b36a20c256..00000000000 --- a/keyboards/converter/adb_usb/keymaps/13bit/keymap.c +++ /dev/null @@ -1,26 +0,0 @@ -#include QMK_KEYBOARD_H - -#define MCTL LCTL(KC_UP) -#define SCST LSFT(LGUI(KC_4)) -#define SLP LALT(LGUI(KC_EJCT)) - -#define APP1 LSFT(LALT(LCTL(LGUI(KC_1)))) -#define APP2 LSFT(LALT(LCTL(LGUI(KC_2)))) -#define APP3 LSFT(LALT(LCTL(LGUI(KC_3)))) -#define APP4 LSFT(LALT(LCTL(LGUI(KC_4)))) -#define APP5 LSFT(LALT(LCTL(LGUI(KC_5)))) -#define APP6 LSFT(LALT(LCTL(LGUI(KC_6)))) -#define APP7 LSFT(LALT(LCTL(LGUI(KC_7)))) -#define APP8 LSFT(LALT(LCTL(LGUI(KC_8)))) - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ext_ansi( - KC_ESC, APP1, APP2, APP3, APP4, APP5, APP6, APP7, APP8, MCTL, KC_MUTE, KC_VOLD, KC_VOLU, SCST, KC_SLCK, KC_PAUS, SLP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, - KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT - ), -}; diff --git a/keyboards/converter/adb_usb/keymaps/default/keymap.c b/keyboards/converter/adb_usb/keymaps/default/keymap.c deleted file mode 100644 index 6b63c1a3c1e..00000000000 --- a/keyboards/converter/adb_usb/keymaps/default/keymap.c +++ /dev/null @@ -1,13 +0,0 @@ -#include QMK_KEYBOARD_H - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ext_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, KC_EJCT, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, - KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT - ), -}; diff --git a/keyboards/converter/adb_usb/led.c b/keyboards/converter/adb_usb/led.c deleted file mode 100644 index 3ee64a8e7d3..00000000000 --- a/keyboards/converter/adb_usb/led.c +++ /dev/null @@ -1,27 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include "adb.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - adb_host_kbd_led(~usb_led); -} diff --git a/keyboards/converter/adb_usb/led.h b/keyboards/converter/adb_usb/led.h deleted file mode 100644 index 19952fae2ab..00000000000 --- a/keyboards/converter/adb_usb/led.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Ported to QMK by Peter Roe -*/ - -#ifndef LED_H -#define LED_H -#include "stdint.h" - - -/* keyboard LEDs */ -#define USB_LED_NUM_LOCK 0 -#define USB_LED_CAPS_LOCK 1 -#define USB_LED_SCROLL_LOCK 2 -#define USB_LED_COMPOSE 3 -#define USB_LED_KANA 4 - - -#ifdef __cplusplus -extern "C" { -#endif - -void led_set(uint8_t usb_led); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/keyboards/converter/adb_usb/matrix.c b/keyboards/converter/adb_usb/matrix.c deleted file mode 100644 index 4a70eb50213..00000000000 --- a/keyboards/converter/adb_usb/matrix.c +++ /dev/null @@ -1,261 +0,0 @@ -/* -Copyright 2011 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Ported to QMK by Peter Roe -*/ - -#include -#include -#include -#include -#include "print.h" -#include "util.h" -#include "debug.h" -#include "adb.h" -#include "matrix.h" -#include "report.h" -#include "host.h" -#include "led.h" -#include "timer.h" - -static bool is_iso_layout = false; - -// matrix state buffer(1:on, 0:off) -static matrix_row_t matrix[MATRIX_ROWS]; - -static void register_key(uint8_t key); - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void matrix_init(void) -{ - adb_host_init(); - - // wait for keyboard to boot up and receive command - _delay_ms(2000); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - // debug_enable = true; - // debug_matrix = true; - // debug_keyboard = true; - // debug_mouse = true; - // print("debug enabled.\n"); - - matrix_init_quantum(); -} - -#ifdef ADB_MOUSE_ENABLE - -#ifdef MAX -#undef MAX -#endif -#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) - -static report_mouse_t mouse_report = {}; - -void adb_mouse_task(void) -{ - uint16_t codes; - int16_t x, y; - static int8_t mouseacc; - - /* tick of last polling */ - static uint16_t tick_ms; - - // polling with 12ms interval - if (timer_elapsed(tick_ms) < 12) return; - tick_ms = timer_read(); - - codes = adb_host_mouse_recv(); - // If nothing received reset mouse acceleration, and quit. - if (!codes) { - mouseacc = 1; - return; - }; - // Bit sixteen is button. - if (~codes & (1 << 15)) - mouse_report.buttons |= MOUSE_BTN1; - if (codes & (1 << 15)) - mouse_report.buttons &= ~MOUSE_BTN1; - // lower seven bits are movement, as signed int_7. - // low byte is X-axis, high byte is Y. - y = (codes>>8 & 0x3F); - x = (codes>>0 & 0x3F); - // bit seven and fifteen is negative - // usb does not use int_8, but int_7 (measuring distance) with sign-bit. - if (codes & (1 << 6)) - x = (x-0x40); - if (codes & (1 << 14)) - y = (y-0x40); - // Accelerate mouse. (They weren't meant to be used on screens larger than 320x200). - x *= mouseacc; - y *= mouseacc; - // Cap our two bytes per axis to one byte. - // Easier with a MIN-function, but since -MAX(-a,-b) = MIN(a,b)... - // I.E. MIN(MAX(x,-127),127) = -MAX(-MAX(x, -127), -127) = MIN(-MIN(-x,127),127) - mouse_report.x = -MAX(-MAX(x, -127), -127); - mouse_report.y = -MAX(-MAX(y, -127), -127); - if (debug_mouse) { - print("adb_host_mouse_recv: "); print_bin16(codes); print("\n"); - print("adb_mouse raw: ["); - phex(mouseacc); print(" "); - phex(mouse_report.buttons); print("|"); - print_decs(mouse_report.x); print(" "); - print_decs(mouse_report.y); print("]\n"); - } - // Send result by usb. - host_mouse_send(&mouse_report); - // increase acceleration of mouse - mouseacc += ( mouseacc < ADB_MOUSE_MAXACC ? 1 : 0 ); - return; -} -#endif - -uint8_t matrix_scan(void) -{ - /* extra_key is volatile and more convoluted than necessary because gcc refused - to generate valid code otherwise. Making extra_key uint8_t and constructing codes - here via codes = extra_key<<8 | 0xFF; would consistently fail to even LOAD - extra_key from memory, and leave garbage in the high byte of codes. I tried - dozens of code variations and it kept generating broken assembly output. So - beware if attempting to make extra_key code more logical and efficient. */ - static volatile uint16_t extra_key = 0xFFFF; - uint16_t codes; - uint8_t key0, key1; - - /* tick of last polling */ - static uint16_t tick_ms; - - codes = extra_key; - extra_key = 0xFFFF; - - if ( codes == 0xFFFF ) - { - // polling with 12ms interval - if (timer_elapsed(tick_ms) < 12) return 0; - tick_ms = timer_read(); - - codes = adb_host_kbd_recv(); - } - - key0 = codes>>8; - key1 = codes&0xFF; - - if (debug_matrix && codes) { - print("adb_host_kbd_recv: "); phex16(codes); print("\n"); - } - - if (codes == 0) { // no keys - return 0; - } else if (codes == 0x7F7F) { // power key press - register_key(0x7F); - } else if (codes == 0xFFFF) { // power key release - register_key(0xFF); - } else if (key0 == 0xFF) { // error - xprintf("adb_host_kbd_recv: ERROR(%d)\n", codes); - // something wrong or plug-in - matrix_init(); - return key1; - } else { - /* Swap codes for ISO keyboard - * https://github.com/tmk/tmk_keyboard/issues/35 - * - * ANSI - * ,----------- ----------. - * | *a| 1| 2 =|Backspa| - * |----------- ----------| - * |Tab | Q| | ]| *c| - * |----------- ----------| - * |CapsLo| A| '|Return | - * |----------- ----------| - * |Shift | Shift | - * `----------- ----------' - * - * ISO - * ,----------- ----------. - * | *a| 1| 2 =|Backspa| - * |----------- ----------| - * |Tab | Q| | ]|Retur| - * |----------- -----` | - * |CapsLo| A| '| *c| | - * |----------- ----------| - * |Shif| *b| Shift | - * `----------- ----------' - * - * ADB scan code USB usage - * ------------- --------- - * Key ANSI ISO ANSI ISO - * --------------------------------------------- - * *a 0x32 0x0A 0x35 0x35 - * *b ---- 0x32 ---- 0x64 - * *c 0x2A 0x2A 0x31 0x31(or 0x32) - */ - if (is_iso_layout) { - if ((key0 & 0x7F) == 0x32) { - key0 = (key0 & 0x80) | 0x0A; - } else if ((key0 & 0x7F) == 0x0A) { - key0 = (key0 & 0x80) | 0x32; - } - } - register_key(key0); - if (key1 != 0xFF) // key1 is 0xFF when no second key. - extra_key = key1<<8 | 0xFF; // process in a separate call - } - - matrix_scan_quantum(); - return 1; -} - -void matrix_print(void){ - -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -inline -static void register_key(uint8_t key) -{ - uint8_t col, row; - col = key&0x07; - row = (key>>3)&0x0F; - if (key&0x80) { - matrix[row] &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 1 -#define MANUFACTURER QMK -#define PRODUCT 46010A keyboard converter -#define DESCRIPTION 46010A keyboard converter - -#define MATRIX_ROWS 14 -#define MATRIX_COLS 8 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 diff --git a/keyboards/converter/hp_46010a/hp_46010a.c b/keyboards/converter/hp_46010a/hp_46010a.c deleted file mode 100644 index 915a220f919..00000000000 --- a/keyboards/converter/hp_46010a/hp_46010a.c +++ /dev/null @@ -1,3 +0,0 @@ -#include "hp_46010a.h" -#include -#include "quantum.h" \ No newline at end of file diff --git a/keyboards/converter/hp_46010a/hp_46010a.h b/keyboards/converter/hp_46010a/hp_46010a.h deleted file mode 100644 index fd5adfc6399..00000000000 --- a/keyboards/converter/hp_46010a/hp_46010a.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - -/* ,---------. ,---------------------------------------------------------. ,---------. ,-------------------. - * | res|stop| | f1| f2| f3| f4|menu|user| f5| f6| f7| f8| |clrl|clrd| | | | | | - * `---------' `---------------------------------------------------------' `---------' `-------------------' - * ,------------------------------------------------------------------------..---------. ,-------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| +| back||insl|dell| | *| /| +| -| - * |------------------------------------------------------------------------||---------| |-------------------| - * | tab| q| w| e| r| t| y| u| i| o| p| [| ]| \||insc|delc| | 7| 8| 9|pade| - * |------------------------------------------------------------------------||---------| |-------------------| - * |caps|ctrl| a| s| d| f| g| h| j| k| l| ;| '| retr|| cur|prev| | 4| 5| 6| ,| - * |------------------------------------------------------------------------------------ |-------------------| - * |dele|lshf | z| x| c| v| b| n| m| ,| .| /|rshf |sel | up|next| | 1| 2| 3| tab| - * |-------------------------------------------------------------------------|---------| |--------------- | - * |prnt| |lalt| space |ralt| |left|down|rght| | 0| .| | - * `-----------------------------------------------------------------------------------' `-------------------' - */ - -#define LAYOUT( \ - KEY_RES, KEY_STOP, KEY_F1, KEY_F2, KEY_F3, KEY_F4,KEY_MENU,KEY_USER, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_CLRL, KEY_CLRD, KEY_B1, KEY_B2, KEY_B3, KEY_B4, \ - KEY_GRAV, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, KEY_MINU, KEY_PLUS, KEY_BACK, KEY_INSL, KEY_DELL, KEY_MULT, KEY_DIV, KEY_ADD, KEY_SUBT, \ - KEY_TAB, KEY_Q,KEY_W, KEY_E, KEY_R, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_O, KEY_P, KEY_LBRA, KEY_RBRA, KEY_PIPE, KEY_INSC, KEY_DELC, KEY_P7, KEY_P8, KEY_P9, KEY_PADE, \ - KEY_CAPS, KEY_CTRL, KEY_A, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_K, KEY_L, KEY_SEMI, KEY_QUOT, KEY_RETR, KEY_CUR, KEY_PREV, KEY_P4, KEY_P5, KEY_P6, KEY_PCOM, \ - KEY_DELE, KEY_LSHF, KEY_Z, KEY_X, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMA, KEY_DOT, KEY_SLAS,KEY_RSHF, KEY_SEL, KEY_UP, KEY_NEXT, KEY_P1, KEY_P2, KEY_P3, KEY_PTAB, \ - KEY_PRNT, KEY_LALT, KEY_SPACE , KEY_RALT, KEY_LEFT, KEY_DOWN, KEY_RGHT, KEY_P0, KEY_PDOT \ -) { \ - {KEY_USER, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_CLRL, KEY_CLRD, KEY_MENU }, \ - {KEY_9, KEY_0, KEY_MINU, KEY_PLUS, KEY_BACK, KEY_INSL, KEY_DELL, KEY_8 }, \ - {KEY_O, KEY_P, KEY_LBRA, KEY_RBRA, KEY_PIPE, KEY_INSC, KEY_DELC, KEY_I }, \ - {KEY_K, KEY_L, KEY_SEMI, KEY_QUOT, KEY_RETR, KEY_CUR, KEY_PREV, KEY_J }, \ - {KEY_COMA, KEY_DOT, KEY_SLAS, KEY_1, KEY_SEL, KEY_UP, KEY_NEXT, KEY_M }, \ - {KEY_SPACE, KEY_LALT, KEY_RALT, KC_NO, KEY_LEFT, KEY_DOWN, KEY_RGHT, KC_NO }, \ - {KEY_F3, KEY_F2, KEY_F1, KEY_GRAV, KEY_CTRL, KEY_STOP, KEY_G, KEY_F4 }, \ - {KEY_6, KEY_5, KEY_4, KEY_3, KEY_CAPS, KEY_RSHF, KEY_LSHF, KEY_7 }, \ - {KEY_Y, KEY_T, KEY_R, KEY_E, KEY_W, KEY_Q, KEY_TAB, KEY_U }, \ - {KEY_RES, KEY_F, KEY_D, KEY_S, KEY_A, KC_NO, KEY_2, KEY_H }, \ - {KEY_P7, KEY_P4, KEY_P8, KEY_P5, KEY_P9, KEY_P6, KEY_PADE, KEY_PCOM }, \ - {KEY_MULT, KEY_P1, KEY_DIV, KEY_P2, KEY_PLUS, KEY_P3, KEY_MINU, KEY_PTAB }, \ - {KEY_B1, KEY_P0, KEY_B2, KC_NO, KEY_B3, KEY_PDOT, KEY_B4, KC_NO }, \ - {KEY_B, KEY_V, KEY_C, KEY_X, KEY_Z, KEY_PRNT, KEY_DELE, KEY_N }, \ -} diff --git a/keyboards/converter/hp_46010a/info.json b/keyboards/converter/hp_46010a/info.json deleted file mode 100644 index 91dcf97ecca..00000000000 --- a/keyboards/converter/hp_46010a/info.json +++ /dev/null @@ -1,121 +0,0 @@ -{ - "keyboard_name": "HP_46010A", - "keyboard_folder": "converter/HP_46010A", - "url": "https://deskthority.net/wiki/HP_46010A", - "maintainer": "listofoptions", - "width": 22, - "height": 7, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Reset", "x":0, "y":0}, - {"label":"Stop", "x":1, "y":0}, - {"label":"F1", "x":2.5, "y":0, "w":1.25}, - {"label":"F2", "x":3.75, "y":0, "w":1.25}, - {"label":"F3", "x":5, "y":0, "w":1.25}, - {"label":"F4", "x":6.25, "y":0, "w":1.25}, - {"label":"Menu", "x":7.5, "y":0}, - {"label":"User", "x":8.5, "y":0}, - {"label":"F5", "x":9.5, "y":0, "w":1.25}, - {"label":"F6", "x":10.75, "y":0, "w":1.25}, - {"label":"F7", "x":12, "y":0, "w":1.25}, - {"label":"F8", "x":13.25, "y":0, "w":1.25}, - {"label":"Clear line", "x":15, "y":0}, - {"label":"Clear display", "x":16, "y":0}, - {"x":18, "y":0}, - {"x":19, "y":0}, - {"x":20, "y":0}, - {"x":21, "y":0}, - {"label":"`", "x":0, "y":2, "w":1.25}, - {"label":"1", "x":1.25, "y":2}, - {"label":"2", "x":2.25, "y":2}, - {"label":"3", "x":3.25, "y":2}, - {"label":"4", "x":4.25, "y":2}, - {"label":"5", "x":5.25, "y":2}, - {"label":"6", "x":6.25, "y":2}, - {"label":"7", "x":7.25, "y":2}, - {"label":"8", "x":8.25, "y":2}, - {"label":"9", "x":9.25, "y":2}, - {"label":"0", "x":10.25, "y":2}, - {"label":"-", "x":11.25, "y":2}, - {"label":"=", "x":12.25, "y":2}, - {"label":"Backspace", "x":13.25, "y":2, "w":1.5}, - {"label":"Insert line", "x":15, "y":2}, - {"label":"Delete line", "x":16, "y":2}, - {"label":"*", "x":18, "y":2}, - {"label":"/", "x":19, "y":2}, - {"label":"+", "x":20, "y":2}, - {"label":"-", "x":21, "y":2}, - {"label":"Tab", "x":0, "y":3, "w":1.75}, - {"label":"Q", "x":1.75, "y":3}, - {"label":"W", "x":2.75, "y":3}, - {"label":"E", "x":3.75, "y":3}, - {"label":"R", "x":4.75, "y":3}, - {"label":"T", "x":5.75, "y":3}, - {"label":"Y", "x":6.75, "y":3}, - {"label":"U", "x":7.75, "y":3}, - {"label":"I", "x":8.75, "y":3}, - {"label":"O", "x":9.75, "y":3}, - {"label":"P", "x":10.75, "y":3}, - {"label":"[", "x":11.75, "y":3}, - {"label":"]", "x":12.75, "y":3}, - {"label":"\\", "x":13.75, "y":3}, - {"label":"Insert char", "x":15, "y":3}, - {"label":"Delete char", "x":16, "y":3}, - {"label":"7", "x":18, "y":3}, - {"label":"8", "x":19, "y":3}, - {"label":"9", "x":20, "y":3}, - {"label":"Enter", "x":21, "y":3}, - {"label":"Caps Lock", "x":0, "y":4}, - {"label":"Ctrl", "x":1, "y":4}, - {"label":"A", "x":2, "y":4}, - {"label":"S", "x":3, "y":4}, - {"label":"D", "x":4, "y":4}, - {"label":"F", "x":5, "y":4}, - {"label":"G", "x":6, "y":4}, - {"label":"H", "x":7, "y":4}, - {"label":"J", "x":8, "y":4}, - {"label":"K", "x":9, "y":4}, - {"label":"L", "x":10, "y":4}, - {"label":";", "x":11, "y":4}, - {"label":"'", "x":12, "y":4}, - {"label":"Return", "x":13, "y":4, "w":1.75}, - {"label":"Cursor", "x":15, "y":4}, - {"label":"Prev", "x":16, "y":4}, - {"label":"4", "x":18, "y":4}, - {"label":"5", "x":19, "y":4}, - {"label":"6", "x":20, "y":4}, - {"label":",", "x":21, "y":4}, - {"label":"Del", "x":0, "y":5}, - {"label":"Shift", "x":1.25, "y":5, "w":1.25}, - {"label":"Z", "x":2.5, "y":5}, - {"label":"X", "x":3.5, "y":5}, - {"label":"C", "x":4.5, "y":5}, - {"label":"V", "x":5.5, "y":5}, - {"label":"B", "x":6.5, "y":5}, - {"label":"N", "x":7.5, "y":5}, - {"label":"M", "x":8.5, "y":5}, - {"label":",", "x":9.5, "y":5}, - {"label":".", "x":10.5, "y":5}, - {"label":"/", "x":11.5, "y":5}, - {"label":"Shift", "x":12.5, "y":5, "w":1.25}, - {"label":"Select", "x":14, "y":5}, - {"label":"Up", "x":15, "y":5}, - {"label":"Next", "x":16, "y":5}, - {"label":"1", "x":18, "y":5}, - {"label":"2", "x":19, "y":5}, - {"label":"3", "x":20, "y":5}, - {"label":"Tab", "x":21, "y":5, "h":2}, - {"label":"Win", "x":0, "y":6}, - {"label":"Extend Char", "x":2.5, "y":6}, - {"x":3.5, "y":6, "w":8}, - {"label":"Extend Char", "x":11.5, "y":6}, - {"label":"Left", "x":14, "y":6}, - {"label":"Down", "x":15, "y":6}, - {"label":"Right", "x":16, "y":6}, - {"label":"0", "x":18, "y":6, "w":2}, - {"label":".", "x":20, "y":6} - ] - } - } -} diff --git a/keyboards/converter/hp_46010a/keymaps/default/keymap.c b/keyboards/converter/hp_46010a/keymaps/default/keymap.c deleted file mode 100644 index cb65bd422e5..00000000000 --- a/keyboards/converter/hp_46010a/keymaps/default/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* ,---------. ,---------------------------------------------------------. ,---------. ,-------------------. - * | esc|xxxx| | f1| f2| f3| f4|xxxx|xxxx| f5| f6| f7| f8| |xxxx|xxxx| | f9| f10| f11| f12| - * `---------' `---------------------------------------------------------' `---------' `-------------------' - * ,------------------------------------------------------------------------..---------. ,-------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| back||ins |home| | *| /| +| -| - * |------------------------------------------------------------------------||---------| |-------------------| - * | tab| q| w| e| r| t| y| u| i| o| p| [| ]| \||del | end| | 7| 8| 9|pade| - * |------------------------------------------------------------------------||---------| |-------------------| - * |caps|ctrl| a| s| d| f| g| h| j| k| l| ;| '| retr||xxxx|pgup| | 4| 5| 6| ,| - * |------------------------------------------------------------------------------------ |-------------------| - * |del |lsft | z| x| c| v| b| n| m| ,| .| /|rsft | app| up|pgdn| | 1| 2| 3| tab| - * |-------------------------------------------------------------------------|---------| |--------------- | - * | gui| |lalt| space |ralt| |left|down|rght| | 0| .| | - * `-----------------------------------------------------------------------------------' `-------------------' - */ - - [0] = LAYOUT( - KC_ESC, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4,KC_NO, KC_NO, KC_F5, KC_F6, KC_F7, KC_F8, KC_NO, KC_NO, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPC, KC_INS, KC_HOME, KC_PAST, KC_PSLS, KC_PPLS, KC_PMNS, \ - KC_TAB, KC_Q,KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_P7, KC_P8, KC_P9, KC_PENT, \ - KC_CAPS, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_NO, KC_PGUP, KC_P4, KC_P5, KC_P6, KC_PCMM, \ - KC_DEL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,KC_RSFT, KC_APP, KC_UP, KC_PGDN, KC_P1, KC_P2, KC_P3, KC_TAB, \ - KC_LGUI, KC_LALT, KC_SPACE , KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \ - ) -} ; \ No newline at end of file diff --git a/keyboards/converter/hp_46010a/matrix.c b/keyboards/converter/hp_46010a/matrix.c deleted file mode 100644 index ac9224087f0..00000000000 --- a/keyboards/converter/hp_46010a/matrix.c +++ /dev/null @@ -1,244 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#if defined(__AVR__) -#include -#endif -#include - -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "LUFA/Drivers/Peripheral/SPI.h" - -#include "config.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#if ( DEBOUNCE > 0 ) -static uint16_t debouncing_time ; -static bool debouncing = false ; -#endif - -static uint8_t matrix [MATRIX_ROWS] = {0}; - -#if ( DEBOUNCE > 0 ) -static uint8_t matrix_debounce_old [MATRIX_ROWS] = {0}; -static uint8_t matrix_debounce_new [MATRIX_ROWS] = {0}; -#endif - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -// the keyboard's internal wiring is such that the inputs to the logic are -// a clock signal, and a reset line. -// the output is a single output pin. im bitbanging here, but the SPI controller -// would work normally -// -// the device functions, by using the clock signal to count 128 bits, the lower -// 3 bits of this 7 bit counter are tied to a 1-of-8 multiplexer, this forms -// the columns. -// the upper 4 bits form the rows, and are decoded using bcd to decimal -// decoders, so that 14 out of 16 of the outputs are wired to the rows of the -// matrix. each switch has a diode, such that the row signal feeds into the -// switch, and then into the diode, then into one of the columns into the -// matrix. the reset pin can be used to reset the entire counter. - -#define RESET _BV(PB0) -#define SCLK _BV(PB1) -#define SDATA _BV(PB3) -#define LED _BV(PD6) - -inline -static -void SCLK_increment(void) { - PORTB &= ~SCLK ; - _delay_us( 4 ) ; // make sure the line is stable - PORTB |= SCLK ; - _delay_us( 4 ) ; - - return ; -} - -inline -static -void Matrix_Reset(void) { - PORTB |= RESET ; - _delay_us( 4 ) ; // make sure the line is stable - PORTB &= ~RESET ; - - return ; -} - -inline -static -uint8_t Matrix_ReceiveByte (void) { - uint8_t received = 0 ; - uint8_t temp = 0 ; - for ( uint8_t bit = 0; bit < MATRIX_COLS; ++bit ) { - // toggle the clock - SCLK_increment(); - temp = (PINB & SDATA) << 4 ; - received |= temp >> bit ; - } - - return received ; -} - -inline -static -void Matrix_ThrowByte(void) { - // we use MATRIX_COLS - 1 here because that would put us at 7 clocks - for ( uint8_t bit = 0; bit < MATRIX_COLS - 1; ++bit ) { - // toggle the clock - SCLK_increment(); - } - - return ; -} - -void matrix_init () { - // debug_matrix = 1; - // PB0 (SS) and PB1 (SCLK) set to outputs - DDRB |= RESET | SCLK ; - // PB2, is unused, and PB3 is our serial input - DDRB &= ~SDATA ; - - // SS is reset for this board, and is active High - // SCLK is the serial clock and is active High - PORTB &= ~RESET ; - PORTB |= SCLK ; - - // led pin - DDRD |= LED ; - PORTD &= ~LED ; - - matrix_init_quantum(); - - //toggle reset, to put the keyboard logic into a known state - Matrix_Reset() ; -} - -uint8_t matrix_scan(void) { - - // the first byte of the keyboard's output data can be ignored - Matrix_ThrowByte(); - -#if ( DEBOUNCE > 0 ) - - for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { - //transfer old debouncing values - matrix_debounce_old[row] = matrix_debounce_new[row] ; - // read new key-states in - matrix_debounce_new[row] = Matrix_ReceiveByte() ; - - if ( matrix_debounce_new[row] != matrix_debounce_old[row] ) { - debouncing = true ; - debouncing_time = timer_read() ; - } - } - -#else - // without debouncing we simply just read in the raw matrix - for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { - matrix[row] = Matrix_ReceiveByte ; - } -#endif - - -#if ( DEBOUNCE > 0 ) - if ( debouncing && ( timer_elapsed( debouncing_time ) > DEBOUNCE ) ) { - - for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { - matrix[row] = matrix_debounce_new[row] ; - } - - debouncing = false ; - } -#endif - Matrix_Reset() ; - - matrix_scan_quantum() ; - return 1; -} - -inline -uint8_t matrix_get_row( uint8_t row ) { - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 01234567\n"); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - print_bin_reverse8(matrix_get_row(row)); - print("\n"); - } -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -// as an aside, I used the M0110 converter: -// tmk_core/common/keyboard.c, quantum/matrix.c, and the project layout of the planck -// the online ducmentation starting from : -// https://docs.qmk.fm/#/config_options -// https://docs.qmk.fm/#/understanding_qmk -// and probably a few i forgot.... \ No newline at end of file diff --git a/keyboards/converter/hp_46010a/readme.md b/keyboards/converter/hp_46010a/readme.md deleted file mode 100644 index 2321faa6e16..00000000000 --- a/keyboards/converter/hp_46010a/readme.md +++ /dev/null @@ -1,52 +0,0 @@ -# HP 46010A - -![46010A](https://deskthority.net/w/images/a/a5/HP_46010A_--_top.jpg) - -A converter for the eponymous keyboard. - -Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions) -Hardware Supported: HP 46010A, Teensy 2.0 - -Make example for this keyboard (after setting up your build environment): - - make converter/HP_46010A:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -to get a matrix created if your board uses a different one (i used the US layout) please see the following gists: -for the matrix itself: https://gist.github.com/listofoptions/cdf70d94767e9c6c027741850a24c568 -for the program to generate the matrix: https://gist.github.com/listofoptions/d245e370678024edbe5bed8c8ab17999 - -to build the actual converter, you are going to need to either splice into the a connector or, use a multi-meter to buzz/ohm out which wires go where. -from the bottom of the pcb the pins are arraged as follows: - - - 4 5 6 - 3 2 1 - - -connect a six pin modular connector of the 6p6c variaty. -then lop off the other end of the cable, striping the wires inside. -use the ohm-meter to find the corresponding wire for each pin on the bottom of the pcb - -the pin meanings are as follows: -1 reset -2 no connection -3 vcc -4 data out -5 clock -6 ground - -wire the ground and power pins to ground and 5v power on the teensy (or other avr device of your choice) -connect -on the teensy the connection is as follows - - -teensy | HP 46010A -----|----- -gnd | gnd (6) -vcc | vcc (3) -PB0 | reset (1) -PB1 | clock (5) -PB3 | data out (4) -gnd | no connection (2) -- optional diff --git a/keyboards/converter/hp_46010a/rules.mk b/keyboards/converter/hp_46010a/rules.mk deleted file mode 100644 index 25be649995c..00000000000 --- a/keyboards/converter/hp_46010a/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = halfkay - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no -SPLIT_KEYBOARD = no -WAIT_FOR_USB = yes -LAYOUTS_HAS_RGB = no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes - -SRC = matrix.c diff --git a/keyboards/converter/ibm_5291/config.h b/keyboards/converter/ibm_5291/config.h deleted file mode 100644 index 9701bdfe973..00000000000 --- a/keyboards/converter/ibm_5291/config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 1 -#define MANUFACTURER QMK -#define PRODUCT 5291 keyboard converter -#define DESCRIPTION 5291 keyboard converter - -#define MATRIX_ROWS 24 -#define MATRIX_COLS 4 - -#define MATRIX_ROW_PINS {B2, B3, B4, B5, B6} -#define MATRIX_COL_PINS {B0, B1} -#define MATRIX_DATA_PIN D0 -#define MATRIX_STROBE_PIN D1 -#define LED_PIN D6 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 0 diff --git a/keyboards/converter/ibm_5291/ibm_5291.c b/keyboards/converter/ibm_5291/ibm_5291.c deleted file mode 100644 index 9b937a545ae..00000000000 --- a/keyboards/converter/ibm_5291/ibm_5291.c +++ /dev/null @@ -1,3 +0,0 @@ -#include "ibm_5291.h" -#include -#include "quantum.h" \ No newline at end of file diff --git a/keyboards/converter/ibm_5291/ibm_5291.h b/keyboards/converter/ibm_5291/ibm_5291.h deleted file mode 100644 index aa1b403242e..00000000000 --- a/keyboards/converter/ibm_5291/ibm_5291.h +++ /dev/null @@ -1,69 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - -/* - * ,-------. ,--------------------------------------------------------------------------. - * | F1| F2| |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS |NumLck |ScrLck | - * |-------| |--------------------------------------------------------------------------| - * | F3| F4| | Tab | Q| W| E| R| T| Y| U| I| O| P| [| ] | | 7| 8| 9| -| - * |-------| |------------------------------------------------------|Ent|---------------| - * | F5| F6| | Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | 4| 5| 6| | - * |-------| |----------------------------------------------------------------------| | - * | F7| F8| |Shif| \| Z| X| C| V| B| N| M| ,| .| /|Shift|PrS| 1| 2| 3| +| - * |-------| |----------------------------------------------------------------------| | - * | F9|F10| | Alt | Space |CapsLck| 0 | . | | - * `-------' `--------------------------------------------------------------------------' -*/ - -#define LAYOUT_5291( \ - KEY_F1,KEY_F2, KEY_ESC, KEY_1, KEY_2,KEY_3,KEY_4,KEY_5,KEY_6,KEY_7,KEY_8,KEY_9, KEY_0, KEY_MIN, KEY_EQU, KEY_BACK, KEY_NLOCK, KEY_SLOCK, \ - KEY_F3,KEY_F4, KEY_TAB, KEY_Q, KEY_W,KEY_E,KEY_R,KEY_T,KEY_Y,KEY_U,KEY_I,KEY_O, KEY_P, KEY_LBRC,KEY_RBRC, KEY_PAD7,KEY_PAD8, KEY_PAD9,KEY_PMIN, \ - KEY_F5,KEY_F6, KEY_LCTR,KEY_A, KEY_S,KEY_D,KEY_F,KEY_G,KEY_H,KEY_J,KEY_K,KEY_L, KEY_SEMI,KEY_QUOT,KEY_TICK, KEY_ENTR,KEY_PAD4,KEY_PAD5, KEY_PAD6, \ - KEY_F7,KEY_F8, KEY_LSFS,KEY_BSLS,KEY_Z,KEY_X,KEY_C,KEY_V,KEY_B,KEY_N,KEY_M,KEY_COMM,KEY_DOT, KEY_SLS,KEY_RSFS, KEY_PAST,KEY_PAD1,KEY_PAD2, KEY_PAD3,KEY_PPLS, \ - KEY_F9,KEY_F10, KEY_LALT, KEY_SPACE, KEY_CLOCK, KEY_PAD0, KEY_PDOT \ -) \ -{ {KEY_Z, KEY_S, KEY_W, KEY_3 }\ -, {KEY_X, KEY_D, KEY_E, KEY_4 }\ -, {KEY_C, KEY_F, KEY_R, KEY_5 }\ -, {KEY_V, KEY_G, KEY_T, KEY_6 }\ -, {KEY_B, KEY_H, KEY_Y, KEY_7 }\ -, {KEY_N, KEY_J, KEY_U, KEY_8 }\ -, {KEY_PAD2, KEY_PAD5,KEY_PAD8,KEY_NLOCK }\ -, {KEY_M, KEY_K, KEY_I, KEY_9 }\ -, {KEY_COMM, KEY_L, KEY_O, KEY_0 }\ -, {KEY_DOT, KEY_SEMI,KEY_P, KEY_MIN }\ -, {KEY_SLS, KEY_QUOT,KEY_LBRC,KEY_EQU }\ -, {KEY_SPACE, KEY_RSFS,KEY_TICK,KEY_RBRC }\ -, {KEY_CLOCK, KEY_PAST,KEY_ENTR,KEY_BACK }\ -, {KEY_PAD0, KEY_PAD1,KEY_PAD4,KEY_PAD7 }\ -, {KEY_PPLS, KC_NO, KEY_PMIN,KEY_SLOCK }\ -, {KEY_PDOT, KEY_PAD3,KEY_PAD6,KEY_PAD9 }\ -, {KEY_BSLS, KEY_A, KEY_Q, KEY_2 }\ -, {KEY_LALT, KC_NO, KC_NO, KEY_1 }\ -, {KEY_F7, KEY_F5, KEY_F3, KEY_F1 }\ -, {KEY_F8, KEY_F6, KEY_F4, KEY_F2 }\ -, {KC_F10, KC_NO, KC_NO, KC_NO }\ -, {KC_F9, KC_NO, KC_NO, KC_NO }\ -, {KEY_LSFS, KEY_LCTR,KEY_TAB, KEY_ESC }\ -, {KC_NO, KC_NO, KC_NO, KC_NO }\ -} - -#define LAYOUT LAYOUT_5291 \ No newline at end of file diff --git a/keyboards/converter/ibm_5291/info.json b/keyboards/converter/ibm_5291/info.json deleted file mode 100644 index 2cb3b76c205..00000000000 --- a/keyboards/converter/ibm_5291/info.json +++ /dev/null @@ -1,97 +0,0 @@ -{ - "keyboard_name": "IBM 5291", - "keyboard_folder": "converter/ibm_5291", - "url": "https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard", - "maintainer": "listofoptions", - "width": 21, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Sys Req", "x":0, "y":0}, - {"label":"Cmd", "x":1, "y":0}, - {"label":"`", "x":2.25, "y":0}, - {"label":"1", "x":3.25, "y":0}, - {"label":"2", "x":4.25, "y":0}, - {"label":"3", "x":5.25, "y":0}, - {"label":"4", "x":6.25, "y":0}, - {"label":"5", "x":7.25, "y":0}, - {"label":"6", "x":8.25, "y":0}, - {"label":"7", "x":9.25, "y":0}, - {"label":"8", "x":10.25, "y":0}, - {"label":"9", "x":11.25, "y":0}, - {"label":"0", "x":12.25, "y":0}, - {"label":"-", "x":13.25, "y":0}, - {"label":"=", "x":14.25, "y":0}, - {"label":"Backspace", "x":15.25, "y":0, "w":1.75}, - {"label":"Reverse Tab", "x":17, "y":0, "w":2}, - {"label":"Dup", "x":19, "y":0, "w":2}, - {"label":"Del", "x":0, "y":1}, - {"label":"Erase Input", "x":1, "y":1}, - {"label":"Tab", "x":2.25, "y":1, "w":1.5}, - {"label":"Q", "x":3.75, "y":1}, - {"label":"W", "x":4.75, "y":1}, - {"label":"E", "x":5.75, "y":1}, - {"label":"R", "x":6.75, "y":1}, - {"label":"T", "x":7.75, "y":1}, - {"label":"Y", "x":8.75, "y":1}, - {"label":"U", "x":9.75, "y":1}, - {"label":"I", "x":10.75, "y":1}, - {"label":"O", "x":11.75, "y":1}, - {"label":"P", "x":12.75, "y":1}, - {"label":"¢", "x":13.75, "y":1}, - {"label":"\\", "x":14.75, "y":1, "w":1.25}, - {"label":"7", "x":17, "y":1}, - {"label":"8", "x":18, "y":1}, - {"label":"9", "x":19, "y":1}, - {"label":"Field -", "x":20, "y":1}, - {"label":"Print", "x":0, "y":2}, - {"label":"Help", "x":1, "y":2}, - {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, - {"label":"A", "x":4, "y":2}, - {"label":"S", "x":5, "y":2}, - {"label":"D", "x":6, "y":2}, - {"label":"F", "x":7, "y":2}, - {"label":"G", "x":8, "y":2}, - {"label":"H", "x":9, "y":2}, - {"label":"J", "x":10, "y":2}, - {"label":"K", "x":11, "y":2}, - {"label":"L", "x":12, "y":2}, - {"label":";", "x":13, "y":2}, - {"label":"'", "x":14, "y":2}, - {"label":"{", "x":15, "y":2}, - {"label":"Field Exit", "x":16, "y":1, "h":2}, - {"label":"4", "x":17, "y":2}, - {"label":"5", "x":18, "y":2}, - {"label":"6", "x":19, "y":2}, - {"label":"Roll Up", "x":0, "y":3}, - {"label":"Roll Down", "x":1, "y":3}, - {"label":"Shift", "x":2.25, "y":3, "w":1.25}, - {"label":"<", "x":3.5, "y":3}, - {"label":"Z", "x":4.5, "y":3}, - {"label":"X", "x":5.5, "y":3}, - {"label":"C", "x":6.5, "y":3}, - {"label":"V", "x":7.5, "y":3}, - {"label":"B", "x":8.5, "y":3}, - {"label":"N", "x":9.5, "y":3}, - {"label":"M", "x":10.5, "y":3}, - {"label":",", "x":11.5, "y":3}, - {"label":".", "x":12.5, "y":3}, - {"label":"/", "x":13.5, "y":3}, - {"label":"Shift", "x":14.5, "y":3, "w":1.5}, - {"label":"Return", "x":16, "y":3}, - {"label":"1", "x":17, "y":3}, - {"label":"2", "x":18, "y":3}, - {"label":"3", "x":19, "y":3}, - {"label":"Field +", "x":20, "y":2, "h":3}, - {"label":"Left", "x":0, "y":4}, - {"label":"Right", "x":1, "y":4}, - {"label":"Error Reset", "x":2.25, "y":4, "w":2}, - {"label":"Space", "x":4.25, "y":4, "w":9.75}, - {"label":"Enter Rec Adv", "x":14, "y":4, "w":2}, - {"label":"0", "x":16, "y":4, "w":2}, - {"label":".", "x":18, "y":4, "w":2} - ] - } - } -} diff --git a/keyboards/converter/ibm_5291/keymaps/default/keymap.c b/keyboards/converter/ibm_5291/keymaps/default/keymap.c deleted file mode 100644 index 9b286c887d6..00000000000 --- a/keyboards/converter/ibm_5291/keymaps/default/keymap.c +++ /dev/null @@ -1,233 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -/* -enum xt_keycodes - { XT_PAST = SAFE_RANGE // XT pad asterisk / print screen - , XT_SLCK // XT scroll lock / break - , XT_F6 // F6 / app key - , XT_F5 // F5 / gui - , XT_F9 // F9 / F11 - , XT_F10 // F10 / F12 - } ; - -static bool shift_pressed = false , - alt_pressed = false , - ctrl_pressed = false , - xt_pscr_pressed = false , - xt_brk_pressed = false , - xt_app_pressed = false , - xt_gui_pressed = false , - xt_lout_pressed = false , - xt_f11_pressed = false , - xt_f12_pressed = false ; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_LSFT: - case KC_RSFT: - if (record->event.pressed) { - shift_pressed = true ; - } else { - shift_pressed = false ; - } - return true; - break; - - case KC_LALT: - if (record->event.pressed) { - alt_pressed = true ; - } else { - alt_pressed = false ; - } - return true; - break; - - case KC_LCTL: - if (record->event.pressed) { - ctrl_pressed = true ; - } else { - ctrl_pressed = false ; - } - return true; - break; - - case XT_PAST: - if (record->event.pressed) { - if (shift_pressed) { - xt_pscr_pressed = true ; - register_code(KC_PSCR); - } else { - register_code(KC_PAST); - } - } else { - if (xt_pscr_pressed) { - xt_pscr_pressed = false ; - unregister_code(KC_PSCR); - } else { - unregister_code(KC_PAST); - } - } - return false; - break; - - case XT_SLCK: - if (record->event.pressed) { - if (ctrl_pressed) { - xt_brk_pressed = true ; - register_code(KC_BRK); - } else { - register_code(KC_SLCK); - } - } else { - if (xt_brk_pressed) { - xt_brk_pressed = false ; - unregister_code(KC_BRK); - } else { - unregister_code(KC_SLCK); - } - } - return false; - break; - - case XT_F6: - if (record->event.pressed) { - if (shift_pressed) { - xt_app_pressed = true ; - register_code(KC_APP); - } else { - register_code(KC_F6); - } - } else { - if (xt_app_pressed) { - xt_app_pressed = false ; - unregister_code(KC_APP); - } else { - unregister_code(KC_F6); - } - } - return false; - break; - - case XT_F5: - if (record->event.pressed) { - if (shift_pressed) { - xt_gui_pressed = true ; - register_code(KC_LGUI); - } else if (ctrl_pressed) { - xt_lout_pressed = true ; - register_code (KC_LGUI) ; - register_code (KC_L) ; - } else { - register_code(KC_F5); - } - } else { - if (xt_gui_pressed) { - xt_gui_pressed = false ; - unregister_code(KC_LGUI); - } else if (xt_lout_pressed) { - xt_lout_pressed = false ; - unregister_code (KC_LGUI) ; - unregister_code (KC_L) ; - } else { - unregister_code(KC_F5); - } - } - return false; - break; - - case XT_F9: - if (record->event.pressed) { - if (shift_pressed) { - xt_f11_pressed = true ; - register_code(KC_F11); - } else { - register_code(KC_F9); - } - } else { - if (xt_f11_pressed) { - xt_f11_pressed = false ; - unregister_code(KC_F11); - } else { - unregister_code(KC_F9); - } - } - return false; - break; - - case XT_F10: - if (record->event.pressed) { - if (shift_pressed) { - xt_f12_pressed = true ; - register_code(KC_F12); - } else { - register_code(KC_F10); - } - } else { - if (xt_f12_pressed) { - xt_f12_pressed = false ; - unregister_code(KC_F12); - } else { - unregister_code(KC_F10); - } - } - return false; - break; - - default: - return true; - break; - } - - return true; -} -*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// default layout is the standard XT layout -/* - * ,-------. ,--------------------------------------------------------------------------. - * | F1| F2| |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS |NumLck |ScrLck | - * |-------| |--------------------------------------------------------------------------| - * | F3| F4| | Tab | Q| W| E| R| T| Y| U| I| O| P| [| ] | | 7| 8| 9| -| - * |-------| |------------------------------------------------------|Ent|---------------| - * | F5| F6| | Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | 4| 5| 6| | - * |-------| |----------------------------------------------------------------------| | - * | F7| F8| |Shif| \| Z| X| C| V| B| N| M| ,| .| /|Shift| *| 1| 2| 3| +| - * |-------| |----------------------------------------------------------------------| | - * | F9|F10| | Alt | Space |CapsLck| 0 | . | | - * `-------' `--------------------------------------------------------------------------' -*/ -/* - [0] = LAYOUT ( - KC_F1,KC_F2, KC_ESC, KC_1, KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_NLCK, XT_SLCK, - KC_F3,KC_F4, KC_TAB, KC_Q, KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O, KC_P, KC_LBRC,KC_RBRC, KC_P7,KC_P8, KC_P9, KC_PMNS, - XT_F5,XT_F6, KC_LCTL,KC_A, KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L, KC_SCLN,KC_QUOT,KC_GRV, KC_ENT, KC_P4,KC_P5, KC_P6, - KC_F7,KC_F8, KC_LSFT,KC_BSLS,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,XT_PAST,KC_P1,KC_P2, KC_P3, KC_PPLS, - XT_F9,XT_F10,KC_LALT, KC_SPACE, KC_CAPS, KC_P0, KC_PDOT - ) -*/ - [0] = LAYOUT ( - KC_F1,KC_F2, KC_ESC, KC_1, KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_NLCK, KC_SLCK, - KC_F3,KC_F4, KC_TAB, KC_Q, KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O, KC_P, KC_LBRC,KC_RBRC, KC_P7,KC_P8, KC_P9, KC_PMNS, - KC_F5,KC_F6, KC_LCTL,KC_A, KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L, KC_SCLN,KC_QUOT,KC_GRV, KC_ENT, KC_P4,KC_P5, KC_P6, - KC_F7,KC_F8, KC_LSFT,KC_BSLS,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_PAST,KC_P1,KC_P2, KC_P3, KC_PPLS, - KC_F9,KC_F10,KC_LALT, KC_SPACE, KC_CAPS, KC_P0, KC_PDOT - ) -} ; - diff --git a/keyboards/converter/ibm_5291/keymaps/kbdbabel_doc_ibm5291_kbd.pdf b/keyboards/converter/ibm_5291/keymaps/kbdbabel_doc_ibm5291_kbd.pdf deleted file mode 100644 index 3560598f02b..00000000000 Binary files a/keyboards/converter/ibm_5291/keymaps/kbdbabel_doc_ibm5291_kbd.pdf and /dev/null differ diff --git a/keyboards/converter/ibm_5291/matrix.c b/keyboards/converter/ibm_5291/matrix.c deleted file mode 100644 index 8b2dba7ab6f..00000000000 --- a/keyboards/converter/ibm_5291/matrix.c +++ /dev/null @@ -1,284 +0,0 @@ -/* -Copyright 2018 listofoptions - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#if defined(__AVR__) -#include -#endif -#include - -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" - -#include "config.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define print_matrix_header() print("\nr/c 01234567\n") -#define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -#define matrix_bitpop(i) bitpop(matrix[i]) -#define ROW_SHIFTER ((uint8_t)1) -#define check_bit(var,pos) ((var) & (1<<(pos))) - -#define NUM_ROW_PINS 5 -#define NUM_COL_PINS 2 - -static const uint8_t row_pins [NUM_ROW_PINS] = MATRIX_ROW_PINS ; -static const uint8_t col_pins [NUM_ROW_PINS] = MATRIX_COL_PINS ; - -#if ( DEBOUNCE > 0 ) -static uint16_t debouncing_time ; -static bool debouncing = false ; -#endif - -static uint8_t matrix [MATRIX_ROWS] = {0}; - -#if ( DEBOUNCE > 0 ) -static uint8_t matrix_debounce [MATRIX_ROWS] = {0}; -#endif - -static -inline -void toggle_led(void) { - uint8_t pin = LED_PIN ; - _SFR_IO8((pin >> 4) + 2) ^= _BV(pin & 0xF); -} - -static -inline -void init_led(void) { - uint8_t pin = LED_PIN ; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static -inline -void init_data(void) { - uint8_t pin = MATRIX_DATA_PIN ; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // LO -} - -static -inline -void init_strobe(void) { - uint8_t pin = MATRIX_STROBE_PIN ; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static -inline -void init_rows(void) { - for ( uint8_t i = 0 ; i < NUM_ROW_PINS; ++i ) { - uint8_t pin = row_pins[i]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } -} - -static -inline -void init_cols(void) { - for ( uint8_t i = 0 ; i < NUM_COL_PINS; ++i ) { - uint8_t pin = col_pins[i]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } -} - -static -inline -void select_row(uint8_t current_row) { - for ( uint8_t i = 0 ; i < NUM_ROW_PINS; ++i ) { - uint8_t pin = row_pins[i] ; - if ( check_bit( current_row, i ) ) { - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } else { - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } - } - wait_us(30) ; -} - -static -inline -void select_col(uint8_t current_col) { - for ( uint8_t i = 0 ; i < NUM_COL_PINS; ++i ) { - uint8_t pin = col_pins[i] ; - if ( check_bit( current_col, i ) ) { - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } else { - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } - } - wait_us(30) ; -} - -static -inline -uint8_t matrix_strobe(uint8_t col_index) { - uint8_t strobe_pin = MATRIX_STROBE_PIN ; - uint8_t data_pin = MATRIX_DATA_PIN ; - - // set strobe pin low - _SFR_IO8((strobe_pin >> 4) + 2) &= ~_BV(strobe_pin & 0xF); - - wait_us(30) ; - - // read data - uint8_t data = (_SFR_IO8(data_pin >> 4) & _BV(data_pin & 0xF)) ; - - // set strobe pin hi - _SFR_IO8((strobe_pin >> 4) + 2) |= _BV(strobe_pin & 0xF); - - uint8_t out = data ? (1 << col_index) : 0 ; - return out ; -} - -static -bool matrix_read(uint8_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - uint8_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - select_row(current_row); - - // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; ++col_index) { - - select_col(col_index) ; - - // strobe the matrix - // Populate the matrix row with the state of the data pin - current_matrix[current_row] |= matrix_strobe(col_index) ; - } - - bool test = last_row_value != current_matrix[current_row] ; - return test ; -} - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -inline -uint8_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_init(void) { - init_led() ; - init_rows() ; - init_cols() ; - init_data() ; - init_strobe() ; - - // initialize matrix state: all keys off - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; -# if (DEBOUNCE > 0) - matrix_debounce [i] = 0; -# endif - } - - matrix_init_quantum() ; -} - -uint8_t matrix_scan(void) { - for ( uint8_t current_row = 0; current_row < MATRIX_ROWS; ++current_row ) { -# if (DEBOUNCE > 0) - bool matrix_changed = matrix_read(matrix_debounce, current_row); - - if (matrix_changed) { - debouncing = true ; - debouncing_time = timer_read(); - } - -# else - matrix_read(matrix, current_row); -# endif - } - -# if (DEBOUNCE > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debounce[i]; - } - debouncing = false; - } -# endif - - matrix_scan_quantum(); - return 1; -} - -void matrix_print(void) { - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} diff --git a/keyboards/converter/ibm_5291/matrix.csv b/keyboards/converter/ibm_5291/matrix.csv deleted file mode 100644 index 40462c2143e..00000000000 --- a/keyboards/converter/ibm_5291/matrix.csv +++ /dev/null @@ -1,96 +0,0 @@ -0,Z -1,S -2,W -3,3 -4,X -5,D -6,E -7,4 -8,C -9,F -10,R -11,5 -12,V -13,G -14,T -15,6 -16,B -17,H -18,Y -19,7 -20,N -21,J -22,U -23,8 -24,PAD_2 -25,PAD_5 -26,PAD_8 -27,NUM_LOCK -28,M -29,K -30,I -31,9 -32,COMMA -33,L -34,O -35,0 -36,PERIOD -37,SEMICOLON -38,P -39,MINUS -40,SLASH -41,QUOTE -42,LEFT_BRACE -43,EQUAL -44,SPACE -45,RSHIFT -46,BACK_QUOTE -47,RIGHT_BRACE -48,CAPS_LOCK -49,PAD_ASTERIX -50,ENTER -51,BACKSPACE -52,PAD_0 -53,PAD_1 -54,PAD_4 -55,PAD_7 -56,PAD_PLUS -57,UNASSIGNED -58,PAD_MINUS -59,SCROLL_LOCK -60,PAD_PERIOD -61,PAD_3 -62,PAD_6 -63,PAD_9 -64,BACKSLASH -65,A -66,Q -67,2 -68,LALT -69,UNASSIGNED -70,UNASSIGNED -71,1 -72,F7 -73,F5 -74,F3 -75,F1 -76,F8 -77,F6 -78,F4 -79,F2 -80,F10 -81,UNASSIGNED -82,UNASSIGNED -83,UNASSIGNED -84,F9 -85,UNASSIGNED -86,UNASSIGNED -87,UNASSIGNED -88,LSHIFT -89,LCTRL -90,TAB -91,ESC -92,UNASSIGNED -93,UNASSIGNED -94,UNASSIGNED -95,UNASSIGNED diff --git a/keyboards/converter/ibm_5291/readme.md b/keyboards/converter/ibm_5291/readme.md deleted file mode 100644 index 03406d3f9de..00000000000 --- a/keyboards/converter/ibm_5291/readme.md +++ /dev/null @@ -1,72 +0,0 @@ -# IBM 5291 keyboard converter - -[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard) - -A converter for the eponymous keyboard. - -Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions) -Hardware Supported: IBM 5291, Teensy 2.0 - -Make example for this keyboard (after setting up your build environment): - - make converter/ibm_5291:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - - -The pinout is as follows: - -IBM−5291−Cable to Pinhead−14 - -| pin | description -----|------------------------ -1 | GND -2 | NC -3 | GND -4 | GN) -5 | +5V -6 | D0 -7 | D1 -8 | D2 -9 | D3 -10| D4 -11| D5 -12| D6 -13| Strobe -14| Out - -The pins on this connector are organized -![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image) - -IBM−5291−2 Cable with DB15M connector - -| pin | description -----|------------- -|1,2,3 | GND -|4 | +5V -|5 | D0 -|6 | D1 -|7 | D2 -|8 | D3 -|9 | D4 -|10 | D5 -|11 | D6 -|12 | Strobe -|13 | Out -|14 | PE -|15 | NC - -The above connector is actually numbered so it should be easier to determine -where the needed connections are. - -To connect to the teensy, the following are pins are needed (if you should choose not set your own): - -* PB0 -> PB6 are connected to D0 -> D6 -* +5V is connected to the corresponding teensy pin -* gnd is as well, only one of the gnd pins needs to be connected though. -* strobe is connected to pin PD1 -* data is connected to PD0 -* PE does not need to be connected to anything, but it could also be connected to gnd - -sources: - http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf diff --git a/keyboards/converter/ibm_5291/rules.mk b/keyboards/converter/ibm_5291/rules.mk deleted file mode 100644 index 57e385f0a9a..00000000000 --- a/keyboards/converter/ibm_5291/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = halfkay - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no -SPLIT_KEYBOARD = no -WAIT_FOR_USB = yes -LAYOUTS_HAS_RGB = no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes - -SRC = matrix.c diff --git a/keyboards/converter/ibm_terminal/config.h b/keyboards/converter/ibm_terminal/config.h deleted file mode 100644 index ba9ec82fa28..00000000000 --- a/keyboards/converter/ibm_terminal/config.h +++ /dev/null @@ -1,138 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2016 Priyadi Iman Nurcahyo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6535 -#define DEVICE_VER 0x0100 -#define MANUFACTURER QMK -#define PRODUCT IBM Terminal Keyboard -#define DESCRIPTION USB converter for IBM Terminal Keyboard - - -/* matrix size */ -#define MATRIX_ROWS 17 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* legacy keymap support */ -#define USE_LEGACY_KEYMAP - - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \ -) - - -/* - * PS/2 USART configuration for ATMega32U4 - */ -#ifdef PS2_USE_USART -/* XCK for clock line */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -/* RXD for data line */ -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ -/* set DDR of CLOCK as input to be slave */ -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Layer 0 - - LAYOUT( - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - - KC_PSCR,KC_ESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, - KC_SLCK,KC_INT4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_NO, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_PAUS,KC_INT5, KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_BSLS,KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM, - KC_APP, KC_INT6, KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_LEFT,KC_INT2,KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_RGUI,KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_GRV, KC_DOWN, KC_NO, KC_P0, KC_PDOT,KC_NO - ), - -/* 101-key keymaps - */ - /* 0: default - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | - * |-----------------------------------------------------------| `-----------' |-----------| +| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | - * `----' `---------------------------------------' `----' `-----------' `---------------' - */ -/* - LAYOUT_101( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK, KC_BRK, - - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT,KC_PENT - ), -*/ -}; diff --git a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk deleted file mode 100644 index 8ff09504720..00000000000 --- a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -PS2_USE_USART = yes -API_SYSEX_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h b/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/converter/ibm_terminal/keymaps/priyadi/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c b/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c deleted file mode 100644 index 3d6da6eab87..00000000000 --- a/keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c +++ /dev/null @@ -1,302 +0,0 @@ -/* -Copyright 2016 Priyadi Iman Nurcahyo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -enum layers { - QWE, // qwerty - COL, // colemak - WOR, // workman - DVO, // dvorak - - MOU, // mouse keys - EMO, // emoji - SYS, // system -}; - -enum keycodes { - // default layout switcher - LAY_QWE = SAFE_RANGE, - LAY_COL, - LAY_WOR, - LAY_DVO, - - // layer switchers - LYR_SYS, - LYR_EMO, - - // os switchers - OS_LIN, - OS_WIN, - OS_MAC, -}; - -// unicode map - -enum unicode_name { - GRIN, // grinning face 😊 - TJOY, // tears of joy 😂 - SMILE, // grining face with smiling eyes 😁 - HEART, // heart ❤ - EYERT, // smiling face with heart shaped eyes 😍 - CRY, // crying face 😭 - SMEYE, // smiling face with smiling eyes 😊 - UNAMU, // unamused 😒 - KISS, // kiss 😘 - HART2, // two hearts 💕 - WEARY, // weary 😩 - OKHND, // ok hand sign 👌 - PENSV, // pensive 😔 - SMIRK, // smirk 😏 - RECYC, // recycle ♻ - WINK, // wink 😉 - THMUP, // thumb up 👍 - THMDN, // thumb down 👎 - PRAY, // pray 🙏 - PHEW, // relieved 😌 - MUSIC, // musical notes - FLUSH, // flushed 😳 - CELEB, // celebration 🙌 - CRY2, // crying face 😢 - COOL, // smile with sunglasses 😎 - NOEVS, // see no evil - NOEVH, // hear no evil - NOEVK, // speak no evil - POO, // pile of poo - EYES, // eyes - VIC, // victory hand - BHART, // broken heart - SLEEP, // sleeping face - SMIL2, // smiling face with open mouth & sweat - HUNRD, // 100 - CONFU, // confused - TONGU, // face with tongue & winking eye - DISAP, // disappointed - YUMMY, // face savoring delicious food - CLAP, // hand clapping - FEAR, // face screaming in fear - HORNS, // smiling face with horns - HALO, // smiling face with halo - BYE, // waving hand - SUN, // sun - MOON, // moon - SKULL, // skull -}; - -const uint32_t PROGMEM unicode_map[] = { - [GRIN] = 0x1F600, - [TJOY] = 0x1F602, - [SMILE] = 0x1F601, - [HEART] = 0x2764, - [EYERT] = 0x1f60d, - [CRY] = 0x1f62d, - [SMEYE] = 0x1F60A, - [UNAMU] = 0x1F612, - [KISS] = 0x1F618, - [HART2] = 0x1F495, - [WEARY] = 0x1F629, - [OKHND] = 0x1F44C, - [PENSV] = 0x1F614, - [SMIRK] = 0x1F60F, - [RECYC] = 0x267B, - [WINK] = 0x1F609, - [THMUP] = 0x1F44D, - [THMDN] = 0x1F44E, - [PRAY] = 0x1F64F, - [PHEW] = 0x1F60C, - [MUSIC] = 0x1F3B6, - [FLUSH] = 0x1F633, - [CELEB] = 0x1F64C, - [CRY2] = 0x1F622, - [COOL] = 0x1F60E, - [NOEVS] = 0x1F648, - [NOEVH] = 0x1F649, - [NOEVK] = 0x1F64A, - [POO] = 0x1F4A9, - [EYES] = 0x1F440, - [VIC] = 0x270C, - [BHART] = 0x1F494, - [SLEEP] = 0x1F634, - [SMIL2] = 0x1F605, - [HUNRD] = 0x1F4AF, - [CONFU] = 0x1F615, - [TONGU] = 0x1F61C, - [DISAP] = 0x1F61E, - [YUMMY] = 0x1F60B, - [CLAP] = 0x1F44F, - [FEAR] = 0x1F631, - [HORNS] = 0x1F608, - [HALO] = 0x1F607, - [BYE] = 0x1F44B, - [SUN] = 0x2600, - [MOON] = 0x1F314, - [SKULL] = 0x1F480, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* qwerty */ - [QWE] = LAYOUT( - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_PSCR, KC_SLCK, KC_PAUS, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - - MO(EMO), MO(SYS), KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_MNXT, KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_MPLY, KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM, - KC_MPRV, KC_VOLD, KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, KC_LEFT, TG(MOU), KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_LGUI, KC_APP, KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_DOWN, XXXXXXX, KC_P0, KC_PDOT, XXXXXXX - ), - - /* colemak */ - [COL] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* workman */ - [WOR] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* dvorak */ - [DVO] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* system */ - [SYS] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, LAY_QWE, OS_WIN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, LAY_DVO, _______, _______, _______, _______, LAY_WOR, OS_LIN, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, LAY_COL, _______, _______, _______, OS_MAC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* mouse keys */ - [MOU] = LAYOUT( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, KC_BTN4, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, KC_BTN5, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, _______, KC_MS_R, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - KC_BTN1, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* emoji */ - [EMO] = LAYOUT( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY), X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN), X(HEART),X(BYE), X(KISS), X(CELEB),X(COOL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,X(SLEEP),X(CLAP), X(CRY), X(VIC), X(BHART),X(SUN), X(SMEYE),X(WINK), X(MOON), X(CONFU), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX - ), - - /* - [XXX] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - */ -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - /* layout switcher */ - case LAY_QWE: - if (record->event.pressed) { - persistent_default_layer_set(1UL<event.pressed) { - persistent_default_layer_set(1UL<event.pressed) { - persistent_default_layer_set(1UL<event.pressed) { - persistent_default_layer_set(1UL< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "stdint.h" -#include "ps2.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - uint8_t ps2_led = 0; - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "util.h" -#include "debug.h" -#include "ps2.h" -#include "matrix.h" - -#define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -#define print_matrix_header() print("\nr/c 01234567\n") -#define matrix_bitpop(i) bitpop(matrix[i]) -#define ROW_SHIFTER ((uint8_t)1) - - -static void matrix_make(uint8_t code); -static void matrix_break(uint8_t code); - - -/* - * Matrix Array usage: - * 'Scan Code Set 3' is assigned into 17x8 cell matrix. - * - * 8bit wide - * +---------+ - * 0| | - * :| | 0x00-0x87 - * ;| | - * 17| | - * +---------+ - */ -static uint8_t matrix[MATRIX_ROWS]; -#define ROW(code) (code>>3) -#define COL(code) (code&0x07) - - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -void matrix_init(void) -{ - debug_enable = true; - //debug_matrix = true; - //debug_keyboard = true; - //debug_mouse = false; - - ps2_host_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - matrix_init_user(); - return; -} - -uint8_t matrix_scan(void) -{ - - // scan code reading states - static enum { - RESET, - RESET_RESPONSE, - KBD_ID0, - KBD_ID1, - CONFIG, - READY, - F0, - } state = RESET; - - uint8_t code; - if ((code = ps2_host_recv())) { - debug("r"); debug_hex(code); debug(" "); - } - - switch (state) { - case RESET: - debug("wFF "); - if (ps2_host_send(0xFF) == 0xFA) { - debug("[ack]\nRESET_RESPONSE: "); - state = RESET_RESPONSE; - } - break; - case RESET_RESPONSE: - if (code == 0xAA) { - debug("[ok]\nKBD_ID: "); - state = KBD_ID0; - } else if (code) { - debug("err\nRESET: "); - state = RESET; - } - break; - // after reset receive keyboard ID(2 bytes) - case KBD_ID0: - if (code) { - state = KBD_ID1; - } - break; - case KBD_ID1: - if (code) { - debug("\nCONFIG: "); - state = CONFIG; - } - break; - case CONFIG: - debug("wF8 "); - if (ps2_host_send(0xF8) == 0xFA) { - debug("[ack]\nREADY\n"); - state = READY; - } - break; - case READY: - switch (code) { - case 0x00: - break; - case 0xF0: - state = F0; - debug(" "); - break; - default: // normal key make - if (code < 0x88) { - matrix_make(code); - } else { - debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); - } - state = READY; - debug("\n"); - } - break; - case F0: // Break code - switch (code) { - case 0x00: - break; - default: - if (code < 0x88) { - matrix_break(code); - } else { - debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); - } - state = READY; - debug("\n"); - } - break; - } - return 1; -} - -inline -uint8_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -inline -static void matrix_make(uint8_t code) -{ - if (!matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] |= 1<### Hardware ->-------- ->You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy]. -> ->Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. -> ->[![M0110 Converter](http://i.imgur.com/yEp2eRim.jpg)](http://i.imgur.com/yEp2eRi.jpg) -> ->#### 4P4C phone handset cable ->Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. -> -> -> ->[Teensy]: http://www.pjrc.com/teensy/ ->[TMK converter]: https://geekhack.org/index.php?topic=72052.0 -> -> ->#### Socket Pinout ->- -> ->![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) -> -> ->#### Pull-up Resistor ->You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK >for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. -> - -[**View the original TMK converter Readme**](https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb)\ -[**View the original TMK converter Repository**](https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb) - - -## QMK Port Changelog - -- 2018/08/01 - Original Release - diff --git a/keyboards/converter/m0110_usb/config.h b/keyboards/converter/m0110_usb/config.h deleted file mode 100644 index 02e4c30fb00..00000000000 --- a/keyboards/converter/m0110_usb/config.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2011,2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - --------------- - -Ported to QMK by Techsock -*/ - -#pragma once - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0110 -#define DEVICE_VER 0x0101 -#define MANUFACTURER Apple -#define PRODUCT M0110(A) -#define DESCRIPTION Converts M0110(A) to USB and/or BT - -/* matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 8 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* magic key */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \ -) - -/* boot magic key */ -#define BOOTMAGIC_KEY_SALT KC_M - -/* ports */ -#define M0110_CLOCK_PORT PORTD -#define M0110_CLOCK_PIN PIND -#define M0110_CLOCK_DDR DDRD -#define M0110_CLOCK_BIT 1 -#define M0110_DATA_PORT PORTD -#define M0110_DATA_PIN PIND -#define M0110_DATA_DDR DDRD -#define M0110_DATA_BIT 0 - - diff --git a/keyboards/converter/m0110_usb/info.json b/keyboards/converter/m0110_usb/info.json deleted file mode 100644 index 6ef61033450..00000000000 --- a/keyboards/converter/m0110_usb/info.json +++ /dev/null @@ -1,172 +0,0 @@ -{ - "keyboard_name": "M0110(A) keyboard converter", - "url": "", - "maintainer": "qmk", - "width": 19.25, - "height": 5, - "layouts": { - "LAYOUT_ansi": { - "key_count": 78, - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":1.5}, - {"label":"Num Lock", "x":15.25, "y":0}, - {"label":"=", "x":16.25, "y":0}, - {"label":"/", "x":17.25, "y":0}, - {"label":"*", "x":18.25, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"7", "x":15.25, "y":1}, - {"label":"8", "x":16.25, "y":1}, - {"label":"9", "x":17.25, "y":1}, - {"label":"-", "x":18.25, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":1.75}, - {"label":"4", "x":15.25, "y":2}, - {"label":"5", "x":16.25, "y":2}, - {"label":"6", "x":17.25, "y":2}, - {"label":"+", "x":18.25, "y":2}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"Up", "x":13.5, "y":3}, - {"label":"1", "x":15.25, "y":3}, - {"label":"2", "x":16.25, "y":3}, - {"label":"3", "x":17.25, "y":3}, - {"label":"Enter", "x":18.25, "y":3, "h":2}, - {"label":"Alt", "x":0, "y":4, "w":1.5}, - {"label":"GUI", "x":1.5, "y":4, "w":2}, - {"label":"Space", "x":3.5, "y":4, "w":6}, - {"label":"MO(1)", "x":9.5, "y":4}, - {"label":"\\", "x":10.5, "y":4}, - {"label":"Left", "x":11.5, "y":4}, - {"label":"Right", "x":12.5, "y":4}, - {"label":"Down", "x":13.5, "y":4}, - {"label":"0", "x":15.25, "y":4, "w":2}, - {"label":".", "x":17.25, "y":4} - ] - }, - "LAYOUT_iso": { - "key_count": 75, - "layout": [ - {"label":"`", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":1.5}, - {"label":"Num Lock", "x":15.25, "y":0}, - {"label":"=", "x":16.25, "y":0}, - {"label":"/", "x":17.25, "y":0}, - {"label":"*", "x":18.25, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"Return", "x":13.75, "y":1, "w":0.75, "h":2}, - {"label":"7", "x":15.25, "y":1}, - {"label":"8", "x":16.25, "y":1}, - {"label":"9", "x":17.25, "y":1}, - {"label":"-", "x":18.25, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"#", "x":12.75, "y":2}, - {"label":"4", "x":15.25, "y":2}, - {"label":"5", "x":16.25, "y":2}, - {"label":"6", "x":17.25, "y":2}, - {"label":"+", "x":18.25, "y":2}, - {"label":"Shift", "x":0, "y":3, "w":1.25}, - {"label":"\\", "x":1.25, "y":3}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"1", "x":15.25, "y":3}, - {"label":"2", "x":16.25, "y":3}, - {"label":"3", "x":17.25, "y":3}, - {"label":"Enter", "x":18.25, "y":3, "h":2}, - {"label":"Option", "x":1, "y":4}, - {"label":"GUI", "x":2, "y":4, "w":1.5}, - {"label":"Space", "x":3.5, "y":4, "w":7.5}, - {"label":"Enter", "x":11, "y":4, "w":1.5}, - {"label":"0", "x":15.25, "y":4, "w":2}, - {"label":".", "x":17.25, "y":4} - ] - } - } -} diff --git a/keyboards/converter/m0110_usb/keymaps/default/keymap.c b/keyboards/converter/m0110_usb/keymaps/default/keymap.c deleted file mode 100644 index c2eeb5144e7..00000000000 --- a/keyboards/converter/m0110_usb/keymaps/default/keymap.c +++ /dev/null @@ -1,92 +0,0 @@ -/* -Copyright 2011,2012,2015 Jun Wako -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see . - --------------- - -Ported to QMK by Techsock -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Default: - * M0110 M0120 - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| -| - * |---------------------------------------------------------| |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | 1| 2| 3| | - * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Fn |Opt| | 0| .| | - * `-----------------------------------------------' `---------------' - * M0110A - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - - [0] = LAYOUT_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LALT, KC_LGUI, KC_SPC, MO(1), LT(1, KC_BSLASH), KC_LEFT, KC_RGHT, KC_DOWN, KC_P0, KC_PDOT), - - - /* Cursor Layer: - * M0110 M0120 - * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab |Hom| Up|PgU|Rst| | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -| - * |---------------------------------------------------------| |---------------| - * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | - * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Fn |Opt| | 0| .| | - * `-----------------------------------------------' `---------------' - * M0110A - * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Ctrl |End| |PgD| | | | |End|PgD|Dow|Shft|PgU| | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space | \|Hom|End|PgD| | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - - [1] = LAYOUT_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, \ - KC_TAB, KC_HOME, KC_UP, KC_PGUP, RESET, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_INS, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - KC_LCAP, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LCTL, KC_END, KC_NO, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_NO, KC_END, KC_PGDN, KC_DOWN, KC_PGUP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LALT, KC_LGUI, KC_SPC, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN, KC_P0, KC_PDOT), - -}; \ No newline at end of file diff --git a/keyboards/converter/m0110_usb/m0110_usb.c b/keyboards/converter/m0110_usb/m0110_usb.c deleted file mode 100644 index a2f98cced6b..00000000000 --- a/keyboards/converter/m0110_usb/m0110_usb.c +++ /dev/null @@ -1,3 +0,0 @@ -#include "m0110_usb.h" -#include -#include "quantum.h" diff --git a/keyboards/converter/m0110_usb/m0110_usb.h b/keyboards/converter/m0110_usb/m0110_usb.h deleted file mode 100644 index 88e74024fc8..00000000000 --- a/keyboards/converter/m0110_usb/m0110_usb.h +++ /dev/null @@ -1,131 +0,0 @@ -/* -Copyright 2011,2012,2014,2015 Jun Wako -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see . - --------------- - -Ported to QMK by Techsock -*/ - -#ifndef M0110_USB_H -#define M0110_USB_H -#endif - -#include "quantum.h" - -/* Common layout for M0110 and M0110A - * This keymap works with both keyboards. As you can see, the M0110A is - * a superset of M0110 keyboard, only one exception is 'Enter'(34) of M0110 - * does not exist on the M0110A. - * - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - * - * M0110A scan codes - * ,---------------------------------------------------------. ,---------------. - * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| - * |---------------------------------------------------------| |---------------| - * | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| - * |-----------------------------------------------------' | |---------------| - * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| - * |---------------------------------------------------------| |---------------| - * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| | - * `---------------------------------------------------------' |-----------| 4C| - * | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| | - * `---------------------------------------------------------' `---------------' - * - * M0110 + M0120 scan codes - * ,---------------------------------------------------------. ,---------------. - * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| - * |---------------------------------------------------------| |---------------| - * | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| - * |---------------------------------------------------------| |---------------| - * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| - * |---------------------------------------------------------| |---------------| - * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| | 53| 54| 55| | - * `---------------------------------------------------------' |-----------| 4C| - * | 3A| 37| 31 | 34| 3A| | 52| 41| | - * `------------------------------------------------' `---------------' - * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two. - */ -#define LAYOUT_ansi( \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \ - K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, KC_NO, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, K34, KC_NO, KC_NO, K37 }, \ - { K38, K39, K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, K47 }, \ - { K48, KC_NO, KC_NO, KC_NO, K4C, K4D, K4E, KC_NO }, \ - { KC_NO, KC_NO, K52, K53, K54, K55, K56, K57 }, \ - { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, K62, KC_NO, KC_NO, KC_NO, K66, KC_NO }, \ - { K68, KC_NO, KC_NO, KC_NO, KC_NO, K6D, KC_NO, KC_NO }, \ -} - -/* International keyboard layout for M0110 + M0120 - * https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg - * Probably International keyboard layout of M0110A doesn't exist. - * - * M0110 + M0120 scan codes - * ,---------------------------------------------------------. ,---------------. - * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| - * |---------------------------------------------------------| |---------------| - * | 30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| - * |------------------------------------------------------, | |---------------| - * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | | 56| 57| 58| 66| - * |---------------------------------------------------------| |---------------| - * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| | 53| 54| 55| | - * `---------------------------------------------------------' |-----------| 4C| - * | 3A| 37| 34 | 31| 3A| | 52| 41| | - * `------------------------------------------------' `---------------' - * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two. - */ -#define LAYOUT_iso( \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K53,K54,K55,K4C, \ - K3A,K37, K34, K31, K52, K41 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, K34, KC_NO, KC_NO, K37 }, \ - { K38, K39, K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, K41, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K47 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, K4C, KC_NO, K4E, KC_NO }, \ - { KC_NO, KC_NO, K52, K53, K54, K55, K56, K57 }, \ - { K58, K59, KC_NO, K5B, K5C, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, K62, KC_NO, KC_NO, KC_NO, K66, KC_NO }, \ - { K68, KC_NO, KC_NO, KC_NO, KC_NO, K6D, KC_NO, KC_NO }, \ -} diff --git a/keyboards/converter/m0110_usb/matrix.c b/keyboards/converter/m0110_usb/matrix.c deleted file mode 100644 index 098f9de0ff9..00000000000 --- a/keyboards/converter/m0110_usb/matrix.c +++ /dev/null @@ -1,121 +0,0 @@ -/* -Copyright 2011,2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - --------------- - -Ported to QMK by Techsock -*/ - -#include -#include -#include -#include "print.h" -#include "util.h" -#include "debug.h" -#include "host.h" -#include "m0110.h" -#include "matrix.h" -#include "report.h" -#include "timer.h" - - -#define CAPS 0x39 -#define CAPS_BREAK (CAPS | 0x80) -#define ROW(key) ((key)>>3&0x0F) -#define COL(key) ((key)&0x07) - - -static bool is_modified = false; - -// matrix state buffer(1:on, 0:off) -static uint8_t *matrix; -static uint8_t _matrix0[MATRIX_ROWS]; - -static void register_key(uint8_t key); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void matrix_init(void) -{ - m0110_init(); - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; - matrix = _matrix0; - - matrix_init_quantum(); - return; -} - -uint8_t matrix_scan(void) -{ - uint8_t key; - - is_modified = false; - key = m0110_recv_key(); - - if (key == M0110_NULL) { - return 0; - } else if (key == M0110_ERROR) { - return 0; - } else { - is_modified = true; - register_key(key); - } - - if (debug_enable) { - print("["); phex(key); print("]\n"); - } - - matrix_scan_quantum(); - return 1; -} - -void matrix_print(void){ - -} - -inline -uint8_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -inline -static void register_key(uint8_t key) -{ - if (key&0x80) { - matrix[ROW(key)] &= ~(1<. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER iw0rm3r -#define PRODUCT IBM Model M 101/102 -#define DESCRIPTION Controlled by AVR chip - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0 } -#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ -#define DEBOUNCE 5 - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/converter/modelm101/info.json b/keyboards/converter/modelm101/info.json deleted file mode 100644 index 868cd89b1a6..00000000000 --- a/keyboards/converter/modelm101/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "IBM Model M 101 ANSI/102 ISO", - "url": "https://github.com/iw0rm3r/qmk_firmware/tree/modelm101/keyboards/converter/modelm101", - "maintainer": "iw0rm3r", - "width": 22.5, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.5}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"label":"Alt", "x":11, "y":5.5, "w":1.5}, {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] - } - } -} \ No newline at end of file diff --git a/keyboards/converter/modelm101/keymaps/default/config.h b/keyboards/converter/modelm101/keymaps/default/config.h deleted file mode 100644 index 779e5a858f9..00000000000 --- a/keyboards/converter/modelm101/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 iw0rm3r - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/converter/modelm101/keymaps/default/keymap.c b/keyboards/converter/modelm101/keymaps/default/keymap.c deleted file mode 100644 index 644e9a5ef82..00000000000 --- a/keyboards/converter/modelm101/keymaps/default/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 iw0rm3r - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base layer */ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/modelm101/keymaps/default/readme.md b/keyboards/converter/modelm101/keymaps/default/readme.md deleted file mode 100644 index fb91a8ebe52..00000000000 --- a/keyboards/converter/modelm101/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for modelm101 \ No newline at end of file diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h b/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h deleted file mode 100644 index 779e5a858f9..00000000000 --- a/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 iw0rm3r - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c b/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c deleted file mode 100644 index 26ced801e5a..00000000000 --- a/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 iw0rm3r - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base layer */ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_CAPS, - KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_APP, KC_PDOT - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md b/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md deleted file mode 100644 index 17b0f40da27..00000000000 --- a/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# This is my personal keymap for modelm101 - -Caps Lock is mapped as LGUI (Windows key). -Num Enter is mapped as Caps Lock. -Num0 is mapped as App key (context menu). \ No newline at end of file diff --git a/keyboards/converter/modelm101/modelm101.c b/keyboards/converter/modelm101/modelm101.c deleted file mode 100644 index c2204bea660..00000000000 --- a/keyboards/converter/modelm101/modelm101.c +++ /dev/null @@ -1,67 +0,0 @@ -/* Copyright 2019 iw0rm3r - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "modelm101.h" - -void keyboard_pre_init_kb(void) { - /* Setting status LEDs pins to output and +5V (off) */ - setPinOutput(B4); - setPinOutput(B5); - setPinOutput(B6); - writePinHigh(B4); - writePinHigh(B5); - writePinHigh(B6); -} - -void matrix_init_kb(void) { - /* put your keyboard start-up code here - * runs once when the firmware starts up */ - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - /* put your looping keyboard code here - * runs every cycle (a lot) */ - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - /* put your per-action keyboard code here - * runs for every action, just before processing by the firmware */ - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1<. - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * The first section contains "names" for physical keys of the keyboard - * and defines their position on the board. - * The second section defines position of the keys on the switch matrix - * (where COLUMNS and ROWS crosses). */ - -#define LAYOUT( \ - K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \ - \ - K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T, K4U, \ - K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, K3R, K3S, K3T, K3U, \ - K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2O, K2P, K2Q, \ - K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, K1P, K1Q, K1R, \ - K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J \ -) \ -{ \ -/* 00 */ { KC_NO, KC_NO, K5A, K1B, K5E, K2F, K5F, K2G, K5G, KC_NO, K2L, KC_NO, K0I, K0J, K1N, K0B }, \ -/* 01 */ { KC_NO, K1A, K3A, K2A, K5D, K3F, K4N, K3G, K3M, K5H, K3L, K2O, K2P, K2Q, KC_NO, KC_NO }, \ -/* 02 */ { K0A, KC_NO, K4A, K5B, K5C, K4F, K5J, K4G, K4M, K5I, K4L, K3O, K4O, K4Q, K4P, KC_NO }, \ -/* 03 */ { KC_NO, KC_NO, K4B, K4C, K4D, K4E, K5K, K4H, K4I, K4J, K4K, K5L, K5M, K3Q, K3P, K5N }, \ -/* 04 */ { KC_NO, KC_NO, K3B, K3C, K3D, K3E, KC_NO, K3H, K3I, K3J, K3K, K3R, K3S, K3T, K3U, K5O }, \ -/* 05 */ { KC_NO, KC_NO, K2B, K2C, K2D, K2E, K3N, K2H, K2I, K2J, K2K, K1O, K1P, K1Q, K1R, KC_NO }, \ -/* 06 */ { K0E, K1M, K1C, K1D, K1E, K1F, K2N, K1I, K1J, K1K, K2M, K4R, K4S, K4T, K5P, KC_NO }, \ -/* 07 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K1G, K0C, K1H, KC_NO, KC_NO, K1L, K0G, K0H, K4U, K0F, K0D }, \ -} -/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ No newline at end of file diff --git a/keyboards/converter/modelm101/readme.md b/keyboards/converter/modelm101/readme.md deleted file mode 100644 index 5355c800714..00000000000 --- a/keyboards/converter/modelm101/readme.md +++ /dev/null @@ -1,42 +0,0 @@ -# modelm101 - -![IBM Model M 101 ANSI/102 ISO](https://i.imgur.com/DAE3W7g.jpg) - -This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus. -Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy 2.0++ board (produced by PJRC). -Project is heavely based on 2 other projects: -1. Teensy 2.0++-based custom Model M controller running TMK firmware ('modelm" by [lmorchard](https://blog.lmorchard.com/2016/02/21/modelm-controller/)); - had a few issues. -2. Teensy 2.0++-based custom Model M 122-key controller running QMK firmware ("ibm122m" by [lukexorz](https://github.com/lukexorz)); - had wrong layout for 101/102-key boards and no status LED support. - -For this conversion you will need: -1. Teensy 2.0++ dev board itself (can be used a different dev board, but it will require some changes in configuration); -2. Ribbon connectors to connect the membrane to a dev board. Depending on your Model M variation, you will need 1 Trio-mate 16pin connector (6-520315-6 or 6-520415-6) and 1 Trio-mate 8pin connector (5-120628-8 or 5-520314-8), or 2 Trio-mate 16pin connectors; -3. Full-sized breadboard (without power rails; half-size should do, but full-sized one looks more native) or a PCB to wire everything up; -4. A bunch of jumper wires; -5. mini-USB male cable with any USB socket you want to use to connect Teensy inside the keyboard to your PC (I use short mini-USB male to mini-USB female cable); -6. (optional) Resistors for connecting status LEDs if your LED PCB doesn't have any; -7. (optional) Double-sided tape to fix USB socket on or inside the keyboard case. - -Pins of the Teensy board you should use by default: -``` -Columns: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 -Pins: C7 C6 C5 C4 C3 C2 C1 C0 E1 E0 D7 D6 D5 D4 D3 D2 --------------------------------------------------------- -Rows: 1 2 3 4 5 6 7 8 -Pins: F7 F6 F5 F4 F3 F2 F1 F0 --------------------------------------------------------- -Status LEDs: CapsLock +5V ScrollLock NumLock -Pins: B6 5V B5 B4 -``` - -Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires. - -Keyboard Maintainer: [iw0rm3r](https://github.com/iw0rm3r) -Hardware Supported: Teensy 2.0++ board by PJRC -Hardware Availability: https://www.pjrc.com/store/teensypp.html - -Make example for this keyboard (after setting up your build environment): - - make converter/modelm101:default:teensy - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk deleted file mode 100644 index 62052697151..00000000000 --- a/keyboards/converter/modelm101/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -MCU = at90usb1286 -#MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = halfkay - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -#OPT_DEFS += -DBOOTLOADER_SIZE=1024 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/converter/numeric_keypad_IIe/config.h b/keyboards/converter/numeric_keypad_IIe/config.h deleted file mode 100644 index a129e1210f6..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/config.h +++ /dev/null @@ -1,101 +0,0 @@ -/* -Copyright 2019 Adam Newbold - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Apple Inc. -#define PRODUCT Numeric Keypad IIe -#define DESCRIPTION "Numeric Keypad IIe, A2M2003" - -/* - -Pin Mappings -============ - -Dsub-15 Connection ------------------- - - Dsub-15 (female) - ,-------------------------. - \ 08 07 06 05 04 03 02 01 / - \ 15 14 13 12 11 10 09 / - `---------------------' - -Header Pins ------------ - _____________________________________ -| | -| 11 10 9 8 7 6 5 4 3 2 1 | -|_____________________________________| - - -Header / Matrix ---------------- - -Pin Name Description --------------------------------------------------------------- -1,2,5,3,4,6 Y0-Y5 Y-direction key-matrix connections -7 NC -9,11,10,8 X4-X7 X-direction key-matrix connections - - -Microcontroller Configuration ------------------------------ - -(Pins are for an Arduino Micro) - -+-----------------------------------+ -| Dsub-15 | Header | Matrix | Micro | -|---------+--------+--------+-------| -| 12 | 11 | X5 | B0 | -| 11 | 10 | X6 | D3 | -| 10 | 9 | X4 | B2 | -| 9 | 8 | X7 | D2 | -| NC | 7 | NC | -- | -| 7 | 6 | Y5 | E6 | -| 6 | 5 | Y2 | D4 | -| 5 | 4 | Y4 | D7 | -| 3 | 3 | Y3 | C6 | -| 2 | 2 | Y1 | D0 | -| 1 | 1 | Y0 | D1 | -+-----------------------------------+ - -Note: Dsub-15 pins 4, 8, 13, 14, and 15 are unused - -Reference ---------- - -https://deskthority.net/wiki/Apple_Numeric_Keypad_IIe -https://geekhack.org/index.php?topic=78048.0 -http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_connector - -*/ - -#define MATRIX_ROWS 4 -#define MATRIX_COLS 6 -#define MATRIX_ROW_PINS { B0, B2, D2, D3 } -#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 } -#define UNUSED_PINS -#define DIODE_DIRECTION COL2ROW -#define SOFT_SERIAL_PIN D0 -#define DEBOUNCE 5 diff --git a/keyboards/converter/numeric_keypad_IIe/info.json b/keyboards/converter/numeric_keypad_IIe/info.json deleted file mode 100644 index f1990698ae1..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Numeric Keypad IIe", - "url": "", - "maintainer": "qmk", - "width": 7.5, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"7", "x":2, "y":0}, {"label":"8", "x":3, "y":0}, {"label":"9", "x":4, "y":0}, {"label":"(", "x":5.5, "y":0}, {"label":")", "x":6.5, "y":0}, {"label":"\u2190", "x":0, "y":1}, {"label":"4", "x":2, "y":1}, {"label":"5", "x":3, "y":1}, {"label":"6", "x":4, "y":1}, {"label":"\u2212", "x":5.5, "y":1}, {"label":"\u00f7", "x":6.5, "y":1}, {"label":"\u2192", "x":0, "y":2}, {"label":"1", "x":2, "y":2}, {"label":"2", "x":3, "y":2}, {"label":"3", "x":4, "y":2}, {"label":"+", "x":5.5, "y":2}, {"label":"\u00d7", "x":6.5, "y":2}, {"label":"Space", "x":0, "y":3}, {"label":"0", "x":1.5, "y":3, "w":1.5}, {"label":",", "x":3, "y":3}, {"label":".", "x":4, "y":3}, {"label":"Ret", "x":5.5, "y":3}, {"label":"Print", "x":6.5, "y":3}] - } - } -} diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/default/config.h b/keyboards/converter/numeric_keypad_IIe/keymaps/default/config.h deleted file mode 100644 index 667668959a3..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/default/keymap.c b/keyboards/converter/numeric_keypad_IIe/keymaps/default/keymap.c deleted file mode 100644 index a8f45535569..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/default/keymap.c +++ /dev/null @@ -1,62 +0,0 @@ -/* Copyright 2019 Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* - +-------+ +-------+-------+-------+ +-------+-------+ - | Esc | | 7 | 8 | 9 | | ( | ) | - +-------+ +-------+-------+-------+ +-------+-------+ - | <-- | | 4 | 5 | 6 | | - | / | - +-------+ +-------+-------+-------+ +-------+-------+ - | --> | | 1 | 2 | 3 | | + | * | - +-------+ +--+-------+-------+-------+ +-------+-------+ - | Space | | 0 | , | . | | Ret | Print | - +-------+ +----------+-------+-------+ +-------+-------+ -*/ - [0] = LAYOUT( - KC_ESCAPE, KC_KP_7, KC_KP_8, KC_KP_9, KC_LEFT_PAREN, KC_RIGHT_PAREN, \ - KC_LEFT, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, KC_KP_SLASH, \ - KC_RIGHT, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_PLUS, KC_KP_ASTERISK, \ - KC_SPACE, KC_KP_0, KC_KP_COMMA, KC_KP_DOT, KC_RETURN, KC_QUESTION \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void keyboard_post_init_user(void) { - -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/default/readme.md b/keyboards/converter/numeric_keypad_IIe/keymaps/default/readme.md deleted file mode 100644 index c58b09d156c..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# Numeric Keypad //e Default Keymap - -All keys perform their default functions displayed on the stock keycaps. Note that the "Print" key presses a question mark (?), which was the default behavior on the Apple //e (with ? the shorthand for the AppleSoft BASIC PRINT command). diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/config.h b/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/config.h deleted file mode 100644 index 667668959a3..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -// place overrides here diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/keymap.c b/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/keymap.c deleted file mode 100644 index e0f04557c64..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/keymap.c +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2019 Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* - +-------+ +-------+-------+-------+ +-------+-------+ - | Esc | | 7 | 8 | 9 | | ( | ) | - +-------+ +-------+-------+-------+ +-------+-------+ - | <-- | | 4 | 5 | 6 | | - | / | - +-------+ +-------+-------+-------+ +-------+-------+ - | --> | | 1 | 2 | 3 | | + | * | - +-------+ +--+-------+-------+-------+ +-------+-------+ - | Space | | 0 | , | . | | Ret | Print | - +-------+ +----------+-------+-------+ +-------+-------+ -*/ - [0] = LAYOUT( - KC__MUTE, KC_KP_7, KC_KP_8, KC_KP_9, KC_LEFT_PAREN, KC_RIGHT_PAREN, \ - KC__VOLDOWN, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, KC_KP_SLASH, \ - KC__VOLUP, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_PLUS, KC_KP_ASTERISK, \ - MO(1), KC_KP_0, KC_KP_COMMA, KC_KP_DOT, KC_RETURN, KC_QUESTION \ - ), - [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_BRMD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_BRMU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void keyboard_post_init_user(void) { - -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/readme.md b/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/readme.md deleted file mode 100644 index 0bccfdb6cf8..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/keymaps/newbold/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -# @newbold's layout for the Numeric Keypad IIe - -Includes the standard layout for all keys except for the left-most column, which is remapped to these keys: - - +-----------------+ - | Mute | - +-----------------+ - | Volume Down | - +-----------------+ - | Volume Up | - +-----------------+ - | Function | - +-----------------+ - - With Function held down: - - +-----------------+ - | Mute | - +-----------------+ - | Brightness Down | - +-----------------+ - | Brightness Up | - +-----------------+ - | Function | - +-----------------+ - - And also with Function held down, "Print" (the lower right key) will trigger RESET (putting the controller into bootloader mode so it can be flashed). - \ No newline at end of file diff --git a/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.c b/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.c deleted file mode 100644 index c29d85d488e..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "numeric_keypad_IIe.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.h b/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.h deleted file mode 100644 index 8892b5553b7..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright Adam Newbold - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once -#include "quantum.h" - -#define LAYOUT( \ - K_ESC, K_7, K_8, K_9, K_LEFT_PARENS, K_RIGHT_PARENS, \ - K_LEFT, K_4, K_5, K_6, K_MINUS, K_DIVIDE, \ - K_RIGHT, K_1, K_2, K_3, K_PLUS, K_MULTIPLY, \ - K_SPACE, K_0, K_COMMA, K_DOT, K_RETURN, K_PRINT \ -){ \ - { K_RIGHT_PARENS, K_ESC, K_4, K_5, K_6, K_7 },\ - { K_DIVIDE, K_LEFT, K_0, K_1, K_2, K_3 },\ - { K_PRINT, K_SPACE, K_LEFT_PARENS, K_MINUS, K_RETURN, K_COMMA },\ - { K_MULTIPLY, K_RIGHT, K_8, K_9, K_DOT, K_PLUS },\ -} diff --git a/keyboards/converter/numeric_keypad_IIe/readme.md b/keyboards/converter/numeric_keypad_IIe/readme.md deleted file mode 100644 index 9eba41610a8..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Numeric Keypad IIe - -![Numeric Keypad IIe](https://upload.wikimedia.org/wikipedia/commons/3/3b/Apple_Numeric_Keypad_IIe.jpg) - -This is a conversion project for the Numeric Keypad IIe, model A2M2003. This was an external keypad that connected to the Apple //e's motherboard (and as such, it lacked any kind of onboard controller). - -The reference conversion setup uses the keyboard's DB15 (VGA) fixed cable connected to a DB15 wiring terminal with breakout board ([this one](https://www.amazon.com/gp/product/B07437293Y/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1), specifically) and wired to an [Arduino Micro](https://store.arduino.cc/usa/arduino-micro). - -Keyboard Maintainer: [Adam Newbold](https://github.com/newbold) -Hardware Supported: Internal Numeric Keypad IIe PCB (Apple part 820.0081.c), ATmega32U4 microcontroller - -Make example for this keyboard (after setting up your build environment): - - make converter/numeric_keypad_IIe:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk deleted file mode 100644 index f61a7d4501b..00000000000 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ /dev/null @@ -1,76 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h deleted file mode 100644 index 4233a53ef03..00000000000 --- a/keyboards/converter/palm_usb/config.h +++ /dev/null @@ -1,120 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* This code makes use of cy384's Arduino USB HID adapter for the Palm Portable - Keyboard, released under the BSD licence */ - - - - -#pragma once - -#define CUSTOM_MATRIX 2 - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0001 -#define DEVICE_VER 0x0100 -#define MANUFACTURER QMK -#define PRODUCT Stowaway converter -#define DESCRIPTION USB converter for Stowaway keyboard - -// IO pins to serial -// https://deskthority.net/wiki/Arduino_Pro_Micro for pin lookup -#define VCC_PIN D1 // pro micro 2 -#define RX_PIN D0 //pro micro 3 , was 8 on cy384 -#define RTS_PIN C6 // 5 //[ was D4 // 4 on the cy384 -#define DCD_PIN E6 //7 - -// if using the particular arduino pinout of CY384 -#ifdef CY384 - #define GND_PIN D7 //6 - #define PULLDOWN_PIN B1 // 15 -#endif - -#ifndef HANDSPRING -// Set to 1 for Handspring or to disable RTS/DCD based handshake. - #define HANDSPRING 0 -#endif - -#define MAXDROP 10 // check if keyboard is connected every X polling cycles -#define SLEEP_TIMEOUT 500000 // check keyboard/reset this many millis - - -#define MATRIX_ROWS 12 -#define MATRIX_COLS 8 - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \ - get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 9600baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 9600 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#if (HANDSPRING == 0) - #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic -#endif -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE - -// we are using Pro micro pin 3 / D0 as serial -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 0 -#define SERIAL_SOFT_RXD_VECT INT0_vect - -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -#include "protocol/serial.h" -#include "timer.h" -#include "pincontrol.h" - - -/* - * Matrix Array usage: - * - * ROW: 12(4bits) - * COL: 8(3bits) - * - * +---------+ - * 0|00 ... 07| - * 1|00 ... 07| - * :| ... | - * :| ... | - * A| | - * B| | - * +---------+ - */ -static uint8_t matrix[MATRIX_ROWS]; - - -// we're going to need a sleep timer -static uint16_t last_activity ; -// and a byte to track duplicate up events signalling all keys up. -static uint16_t last_upKey ; -// serial device can disconnect. Check every MAXDROP characters. -static uint16_t disconnect_counter = 0; - - -// bitmath masks. -#define KEY_MASK 0b10000000 -#define COL_MASK 0b00000111 -#define ROW_MASK 0b01111000 - - -#define ROW(code) (( code & ROW_MASK ) >>3) -#define COL(code) ((code & COL_MASK) ) -#define KEYUP(code) ((code & KEY_MASK) >>7 ) - -static bool is_modified = false; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - - -void pins_init(void) { - // set pins for pullups, Rts , power &etc. - - //print ("pins setup\n"); - pinMode(VCC_PIN, PinDirectionOutput); - digitalWrite(VCC_PIN, PinLevelLow); - -#if ( HANDSPRING == 0) - -#ifdef CY835 - pinMode(GND_PIN, PinDirectionOutput); - digitalWrite(GND_PIN, PinLevelLow); - - pinMode(PULLDOWN_PIN, PinDirectionOutput); - digitalWrite(PULLDOWN_PIN, PinLevelLow); -#endif - - pinMode(DCD_PIN, PinDirectionInput); - pinMode(RTS_PIN, PinDirectionInput); -#endif - -/* check that the other side isn't powered up. - test=digitalRead(DCD_PIN); - xprintf("b%02X:", test); - test=digitalRead(RTS_PIN); - xprintf("%02X\n", test); -*/ - -} - -uint8_t rts_reset(void) { - static uint8_t firstread ; -/* bounce RTS so device knows it is rebooted */ - -// On boot, we keep rts as input, then switch roles here -// on leaving sleep, we toggle the same way - - firstread=digitalRead(RTS_PIN); - // printf("r%02X:", firstread); - - pinMode(RTS_PIN, PinDirectionOutput); - - if (firstread == PinLevelHigh) { - digitalWrite(RTS_PIN, PinLevelLow); - } - _delay_ms(10); - digitalWrite(RTS_PIN, PinLevelHigh); - - -/* the future is Arm - if (palReadPad(RTS_PIN_IOPRT) == PinLevelLow) - { - _delay_ms(10); - palSetPadMode(RTS_PINn_IOPORT, PinDirectionOutput_PUSHPULL); - palSetPad(RTS_PORT, RTS_PIN); - } - else - { - palSetPadMode(RTS_PIN_RTS_PORT, PinDirectionOutput_PUSHPULL); - palSetPad(RTS_PORT, RTS_PIN); - palClearPad(RTS_PORT, RTS_PIN); - _delay_ms(10); - palSetPad(RTS_PORT, RTS_PIN); - } -*/ - - - _delay_ms(5); - //print("rts\n"); - return 1; -} - -uint8_t get_serial_byte(void) { - static uint8_t code; - while(1) { - code = serial_recv(); - if (code) { - debug_hex(code); debug(" "); - return code; - } - } -} - -uint8_t palm_handshake(void) { - // assumes something has seen DCD go high, we've toggled RTS - // and we now need to verify handshake. - // listen for up to 4 packets before giving up. - // usually I get the sequence FF FA FD - static uint8_t codeA=0; - - for (uint8_t i=0; i < 5; i++) { - codeA=get_serial_byte(); - if ( 0xFA == codeA) { - if( 0xFD == get_serial_byte()) { - return 1; - } - } - } - return 0; -} - -uint8_t palm_reset(void) { - print("@"); - rts_reset(); // shouldn't need to power cycle. - - if ( palm_handshake() ) { - last_activity = timer_read(); - return 1; - } else { - print("failed reset"); - return 0; - } - -} - -uint8_t handspring_handshake(void) { - // should be sent 15 ms after power up. - // listen for up to 4 packets before giving up. - static uint8_t codeA=0; - - for (uint8_t i=0; i < 5; i++) { - codeA=get_serial_byte(); - if ( 0xF9 == codeA) { - if( 0xFB == get_serial_byte()) { - return 1; - } - } - } - return 0; -} - -uint8_t handspring_reset(void) { - digitalWrite(VCC_PIN, PinLevelLow); - _delay_ms(5); - digitalWrite(VCC_PIN, PinLevelHigh); - - if ( handspring_handshake() ) { - last_activity = timer_read(); - disconnect_counter=0; - return 1; - } else { - print("-HSreset"); - return 0; - } -} - -void matrix_init(void) -{ - debug_enable = true; - //debug_matrix =true; - - serial_init(); // arguments all #defined - -#if (HANDSPRING == 0) - pins_init(); // set all inputs and outputs. -#endif - - print("power up\n"); - digitalWrite(VCC_PIN, PinLevelHigh); - - // wait for DCD strobe from keyboard - it will do this - // up to 3 times, then the board needs the RTS toggled to try again - -#if ( HANDSPRING == 1) - if ( handspring_handshake() ) { - last_activity = timer_read(); - } else { - print("failed handshake"); - _delay_ms(1000); - //BUG /should/ power cycle or toggle RTS & reset, but this usually works. - } - -#else /// Palm / HP device with DCD - while( digitalRead(DCD_PIN) != PinLevelHigh ) {;} - print("dcd\n"); - - rts_reset(); // at this point the keyboard should think all is well. - - if ( palm_handshake() ) { - last_activity = timer_read(); - } else { - print("failed handshake"); - _delay_ms(1000); - //BUG /should/ power cycle or toggle RTS & reset, but this usually works. - } - -#endif - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - matrix_init_quantum(); - return; - - -} - - -uint8_t matrix_scan(void) -{ - uint8_t code; - code = serial_recv(); - if (!code) { -/* - disconnect_counter ++; - if (disconnect_counter > MAXDROP) { - // set all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - } -*/ - // check if the keyboard is asleep. - if (timer_elapsed(last_activity) > SLEEP_TIMEOUT) { -#if(HANDSPRING ==0 ) - palm_reset(); -#else - handspring_reset(); -#endif - return 0; - } - - } - - last_activity = timer_read(); - disconnect_counter=0; // if we are getting serial data, we're connected. - - debug_hex(code); debug(" "); - - - switch (code) { - case 0xFD: // unexpected reset byte 2 - print("rstD "); - return 0; - case 0xFA: // unexpected reset - print("rstA "); - return 0; - } - - if (KEYUP(code)) { - if (code == last_upKey) { - // all keys are not pressed. - // Manual says to disable all modifiers left open now. - // but that could defeat sticky keys. - // BUG? dropping this byte. - last_upKey=0; - return 0; - } - // release - if (matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] &= ~(1<. -*/ - -#include QMK_KEYBOARD_H - -enum layers { -_QWERTY=0, -_CDH, -_FN -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK, APP0, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1, - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3, - LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT - -*/ - [_QWERTY] = LAYOUT( /* Base */ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, TG(_CDH), - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT - ), - - [_CDH] = LAYOUT( /* Base */ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, _______, - KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT - ), - - [_FN] = LAYOUT( // FN Key - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, KC_ENT, _______, _______, _______, _______, _______, _______, _______ - ), - -}; diff --git a/keyboards/converter/palm_usb/stowaway/rules.mk b/keyboards/converter/palm_usb/stowaway/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/converter/palm_usb/stowaway/stowaway.h b/keyboards/converter/palm_usb/stowaway/stowaway.h deleted file mode 100644 index 71af9bf4a81..00000000000 --- a/keyboards/converter/palm_usb/stowaway/stowaway.h +++ /dev/null @@ -1,53 +0,0 @@ -/* -Copyright 2018 milestogo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "quantum.h" - - -/* Stowaway Keyboard - based on matrix from http://www.splorp.com/pdf/stowawayhwref.pdf - - 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK APP0, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1, - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3, - LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT - -*/ -#define LAYOUT( \ - K000, K001, K002, K004, K005, K006, K007, K064, K065, K066, K060, K061, K062, K063,\ - K031, K011, K012, K013, K014, K015, K016, K074, K075, K076, K077, K070, K071, K072, K073,\ - K030, K021, K022, K023, K024, K025, K026, K084, K085, K086, K087, K080, K081, K082,\ - K110, K003, K020, K054, K055, K056, K057, K094, K095, K096, K090, K111, K091, K092,\ - K032, K042, K043, K010, K027, K067, K017, K097, K100, K101, K102, K103 \ -) { \ - { K000, K001, K002 , K003, K004, K005, K006, K007 }, \ - { K010, K011, K012 , K013, K014, K015, K016, K017 }, \ - { K020, K021, K022 , K023, K024, K025, K026, K027 }, \ - { K030, K031, K032 , KC_NO,KC_NO, KC_NO,KC_NO, KC_NO }, \ - { KC_NO, KC_NO, K042 , K043, KC_NO, KC_NO,KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO,K054, K055, K056, K057 }, \ - { K060, K061, K062 , K063, K064, K065, K066, K067 }, \ - { K070, K071, K072 , K073, K074, K075, K076, K077 }, \ - { K080, K081, K082 , KC_NO,K084, K085, K086, K087 }, \ - { K090, K091, K092 , KC_NO,K094, K095, K096, K097 }, \ - { K100, K101, K102 , K103, KC_NO, KC_NO,KC_NO, KC_NO }, \ - { K110, K111, KC_NO, KC_NO,KC_NO, KC_NO,KC_NO, KC_NO } \ -} - diff --git a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.c b/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.c deleted file mode 100644 index 8c5a87f35f8..00000000000 --- a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -// Value to place in RTC backup register 10 for persistent bootloader mode -#define RTC_BOOTLOADER_FLAG 0x424C - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - //JTAG-DP Disabled and SW-DP Enabled - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - //Set backup register DR10 to enter bootloader on reset - BKP->DR10 = RTC_BOOTLOADER_FLAG; -} diff --git a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.h b/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 9427adabf11..00000000000 --- a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOA_LED 8 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.mk b/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/converter/siemens_tastatur/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/converter/siemens_tastatur/bootloader_defs.h b/keyboards/converter/siemens_tastatur/bootloader_defs.h deleted file mode 100644 index 6b8fa9f727c..00000000000 --- a/keyboards/converter/siemens_tastatur/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * /tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/converter/siemens_tastatur/chconf.h b/keyboards/converter/siemens_tastatur/chconf.h deleted file mode 100644 index bbd9b2da62d..00000000000 --- a/keyboards/converter/siemens_tastatur/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/converter/siemens_tastatur/config.h b/keyboards/converter/siemens_tastatur/config.h deleted file mode 100644 index bbb74715210..00000000000 --- a/keyboards/converter/siemens_tastatur/config.h +++ /dev/null @@ -1,67 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x8968 -#define PRODUCT_ID 0x4353 -#define DEVICE_VER 0x0001 - -#define MANUFACTURER Yiancar-Designs -#define PRODUCT Siemens Tastatur -#define DESCRIPTION Practice - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 19 - -//This is all fake and not used -#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 } -#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 } -#define DIODE_DIRECTION COL2ROW - - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/converter/siemens_tastatur/halconf.h b/keyboards/converter/siemens_tastatur/halconf.h deleted file mode 100644 index 4ffc50fb118..00000000000 --- a/keyboards/converter/siemens_tastatur/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/converter/siemens_tastatur/keymaps/default/config.h b/keyboards/converter/siemens_tastatur/keymaps/default/config.h deleted file mode 100644 index 76d8106decf..00000000000 --- a/keyboards/converter/siemens_tastatur/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -// place overrides here diff --git a/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c b/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c deleted file mode 100644 index 70edf94d73f..00000000000 --- a/keyboards/converter/siemens_tastatur/keymaps/default/keymap.c +++ /dev/null @@ -1,64 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - DCAPS = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SCLN, KC_CIRC, KC_BSPC, KC_ENT, KC_0, KC_1, KC_2, KC_3, KC_4, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_RBRC, KC_PLUS, KC_5, KC_6, KC_7, KC_8, KC_9, - DCAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_BSLS, KC_RBRC, KC_DLR, KC_EQL, KC_0, KC_1, KC_2, KC_3, KC_4, - KC_LSFT, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_MINS, KC_5, KC_6, KC_7, KC_8, KC_9, - KC_SPC - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case DCAPS: - if (record->event.pressed) { - // When keycode DCAPS is pressed. - // This is needed for mac. - tap_code(KC_CAPS); - } else { - // When keycode DCAPS is released. - } - break; - } - return true; -} - -void matrix_init_user(void) { - setPinOutput(B0); - writePinLow(B0); -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinHigh(B0); - } else { - writePinLow(B0); - } -} diff --git a/keyboards/converter/siemens_tastatur/keymaps/default/readme.md b/keyboards/converter/siemens_tastatur/keymaps/default/readme.md deleted file mode 100644 index 8b72f0770ea..00000000000 --- a/keyboards/converter/siemens_tastatur/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for siemens_tastatur diff --git a/keyboards/converter/siemens_tastatur/ld/MKL26Z64.ld b/keyboards/converter/siemens_tastatur/ld/MKL26Z64.ld deleted file mode 100644 index c4ca8b874cc..00000000000 --- a/keyboards/converter/siemens_tastatur/ld/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/converter/siemens_tastatur/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/converter/siemens_tastatur/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index d0688ef6016..00000000000 --- a/keyboards/converter/siemens_tastatur/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,88 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - * You will have to - * #define CORTEX_VTOR_INIT 0x5000 - * in your projects chconf.h - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 64k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/converter/siemens_tastatur/matrix.c b/keyboards/converter/siemens_tastatur/matrix.c deleted file mode 100644 index b7654e6e12f..00000000000 --- a/keyboards/converter/siemens_tastatur/matrix.c +++ /dev/null @@ -1,252 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include -#include -#include "quantum.h" -#include "timer.h" -#include "wait.h" -#include "print.h" -#include "matrix.h" -#include "ch.h" -#include "hal.h" - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -volatile uint16_t porta_buffer = 0; -volatile uint16_t portb_buffer = 0; - -static uint32_t switch_buffer = 0; - -// Trigger on negative edge of any of the sense lines. -static void extcb1(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; - chSysLockFromISR(); - porta_buffer = palReadPort(GPIOA); - portb_buffer = palReadPort(GPIOB); - //Disable further interrupts that might occur on same button press. - extChannelDisable(&EXTD1,0); - extChannelDisable(&EXTD1,1); - extChannelDisable(&EXTD1,2); - extChannelDisable(&EXTD1,9); - extChannelDisable(&EXTD1,10); - extChannelDisable(&EXTD1,12); - extChannelDisable(&EXTD1,13); - extChannelDisable(&EXTD1,14); - extChannelDisable(&EXTD1,15); - - extChannelEnable(&EXTD1,0); - extChannelEnable(&EXTD1,1); - extChannelEnable(&EXTD1,2); - extChannelEnable(&EXTD1,9); - extChannelEnable(&EXTD1,10); - extChannelEnable(&EXTD1,12); - extChannelEnable(&EXTD1,13); - extChannelEnable(&EXTD1,14); - extChannelEnable(&EXTD1,15); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1 }, //0 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1 }, //1 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1 }, //2 - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1 }, //9 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1 }, //10 - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOB, extcb1 }, //12 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOB, extcb1 }, //13 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOB, extcb1 }, //14 - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOB, extcb1 } //15 - }, -}; - -void matrix_init(void) { - //Set I/O as pull-up inputs to read states - setPinInputHigh(A0); - setPinInputHigh(A1); - setPinInputHigh(A2); - setPinInputHigh(A3); - setPinInputHigh(A4); - setPinInputHigh(A5); - setPinInputHigh(A6); - setPinInputHigh(A7); - setPinInputHigh(A8); - setPinInputHigh(A9); - setPinInputHigh(A10); - setPinInputHigh(B3); - setPinInputHigh(B4); - setPinInputHigh(B5); - setPinInputHigh(B6); - setPinInputHigh(B7); - setPinInputHigh(B8); - setPinInputHigh(B9); - setPinInputHigh(B11); - setPinInputHigh(B12); - setPinInputHigh(B13); - setPinInputHigh(B14); - setPinInputHigh(B15); - - memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - - matrix_init_quantum(); - //Start interrupt driver - extStart(&EXTD1, &extcfg); -} - -uint8_t matrix_scan(void) { - switch_buffer = ((uint32_t)(porta_buffer & 0x7FF)) | ((uint32_t)(portb_buffer & 0x3F8) << 8); - - switch (switch_buffer) { - case 0x1134E: matrix[0] = 0x01; break; - case 0x3774D: matrix[0] = 0x02; break; - case 0x10BCC: matrix[0] = 0x04; break; - case 0x16B4B: matrix[0] = 0x08; break; - case 0x167CA: matrix[0] = 0x10; break; - case 0x35FC9: matrix[0] = 0x20; break; - case 0x15B48: matrix[0] = 0x40; break; - case 0x28347: matrix[0] = 0x80; break; - case 0x173C6: matrix[0] = 0x100; break; - case 0x143CF: matrix[0] = 0x200; break; - case 0x3FDC5: matrix[0] = 0x400; break; - case 0x3FD21: matrix[0] = 0x800; break; - case 0x3FD77: matrix[0] = 0x1000; break; - case 0x3FD72: matrix[0] = 0x2000; break; - //Special pin - case 0x3E7FA: matrix[0] = 0x8000; break; - case 0x183EE: matrix[0] = 0x10000; break; - case 0x197F3: matrix[0] = 0x20000; break; - case 0x1AB7E: matrix[0] = 0x40000; break; - - case 0x107C3: matrix[1] = 0x01; break; - case 0x3FD2E: matrix[1] = 0x02; break; - case 0x3FD28: matrix[1] = 0x04; break; - case 0x3FD3A: matrix[1] = 0x08; break; - case 0x3FD2D: matrix[1] = 0x10; break; - case 0x3FD2B: matrix[1] = 0x20; break; - case 0x3FDA5: matrix[1] = 0x40; break; - case 0x3FDAA: matrix[1] = 0x80; break; - case 0x3FD36: matrix[1] = 0x100; break; - case 0x3FD30: matrix[1] = 0x200; break; - case 0x3FDAF: matrix[1] = 0x400; break; - case 0x3FD22: matrix[1] = 0x800; break; - case 0x157D4: matrix[1] = 0x1000; break; - //Does not exist in matrix - //Special pin - case 0x1C778: matrix[1] = 0x8000; break; - case 0x387ED: matrix[1] = 0x10000; break; - case 0x19B74: matrix[1] = 0x20000; break; - case 0x3FD7D: matrix[1] = 0x40000; break; - - //Special pin - case 0x3FDBE: matrix[2] = 0x02; break; - case 0x3FDAC: matrix[2] = 0x04; break; - case 0x3FDBB: matrix[2] = 0x08; break; - case 0x3FD39: matrix[2] = 0x10; break; - case 0x3FDB8: matrix[2] = 0x20; break; - case 0x3FDB7: matrix[2] = 0x40; break; - case 0x3FD35: matrix[2] = 0x80; break; - case 0x3FDB4: matrix[2] = 0x100; break; - case 0x3FD33: matrix[2] = 0x200; break; - case 0x3FDA3: matrix[2] = 0x400; break; - case 0x3FD24: matrix[2] = 0x800; break; - case 0x0FFDB: matrix[2] = 0x1000; break; - case 0x3FDF5: matrix[2] = 0x2000; break; - case 0x3FDFF: matrix[2] = 0x4000; break; - case 0x3C3E4: matrix[2] = 0x8000; break; - case 0x38B6C: matrix[2] = 0x10000; break; - case 0x39FF6: matrix[2] = 0x20000; break; - case 0x3FDFC: matrix[2] = 0x40000; break; - - //Special pin - case 0x3FDA6: matrix[3] = 0x02; break; - case 0x3FD27: matrix[3] = 0x04; break; - case 0x3FD3C: matrix[3] = 0x08; break; - case 0x3FDA9: matrix[3] = 0x10; break; - case 0x3FDBD: matrix[3] = 0x20; break; - case 0x3FDB1: matrix[3] = 0x40; break; - case 0x3FDB2: matrix[3] = 0x80; break; - case 0x30353: matrix[3] = 0x100; break; - case 0x37BD1: matrix[3] = 0x200; break; - case 0x363D2: matrix[3] = 0x400; break; - case 0x3FD5F: matrix[3] = 0x800; break; - //Does not exist in matrix - //Does not exist in matrix - //Special pin - case 0x1BF00: matrix[3] = 0x8000; break; - case 0x18FEB: matrix[3] = 0x10000; break; - case 0x3FF69: matrix[3] = 0x20000; break; - case 0x3A37B: matrix[3] = 0x40000; break; - default: - if ((portb_buffer & 0x1000) == 0) { matrix[1] = 0x4000; break; } - if ((portb_buffer & 0x2000) == 0) { matrix[3] = 0x4000; break; } - if ((portb_buffer & 0x4000) == 0) { matrix[0] = 0x4000; break; } - if ((portb_buffer & 0x8000) == 0) { matrix[2] = 0x01; break; } - matrix[0] = 0x00; - matrix[1] = 0x00; - matrix[2] = 0x00; - matrix[3] = 0x00; - } - //Special case for Shift - if (readPin(B11) == 0) { matrix[3] |= 0x01; } - - porta_buffer = 65535; - portb_buffer = 65535; - - matrix_scan_quantum(); - return 1; -} - -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - diff --git a/keyboards/converter/siemens_tastatur/mcuconf.h b/keyboards/converter/siemens_tastatur/mcuconf.h deleted file mode 100644 index 9945e7408d1..00000000000 --- a/keyboards/converter/siemens_tastatur/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/converter/siemens_tastatur/readme.md b/keyboards/converter/siemens_tastatur/readme.md deleted file mode 100644 index ca1b6ec0f3d..00000000000 --- a/keyboards/converter/siemens_tastatur/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# Siemens Tastatur - -[Siemens_tastatur](https://i.imgur.com/mQY4CQA.jpg) - -A Blue Pill STM32F103C8T6-based Converter board for a very very old keyboard. - -Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar) -Hardware Supported: Blue Pill STM32F103C8T6 -Hardware Availability: Custom PCB available, contact me - -Make example for this keyboard (after setting up your build environment): - - make converter/siemens_tastatur:default - -Unplugging and replugging the keyboard is necessary after a firmware update. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/converter/siemens_tastatur/rules.mk b/keyboards/converter/siemens_tastatur/rules.mk deleted file mode 100644 index 75b3d7b3613..00000000000 --- a/keyboards/converter/siemens_tastatur/rules.mk +++ /dev/null @@ -1,52 +0,0 @@ -SRC = matrix.c -# GENERIC STM32F103C8T6 board - stm32duino bootloader -OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = GENERIC_STM32_F103 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -DFU_ARGS = -d 1eaf:0003 -a 2 - -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no -CUSTOM_MATRIX = yes - diff --git a/keyboards/converter/siemens_tastatur/siemens_tastatur.c b/keyboards/converter/siemens_tastatur/siemens_tastatur.c deleted file mode 100644 index 298f24c36f9..00000000000 --- a/keyboards/converter/siemens_tastatur/siemens_tastatur.c +++ /dev/null @@ -1,45 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include "siemens_tastatur.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - diff --git a/keyboards/converter/siemens_tastatur/siemens_tastatur.h b/keyboards/converter/siemens_tastatur/siemens_tastatur.h deleted file mode 100644 index 6a81b2550d7..00000000000 --- a/keyboards/converter/siemens_tastatur/siemens_tastatur.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h, k0i, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, k1h, k1i, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, k2i, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3e, k3f, k3g, k3h, k3i, \ - k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h, k0i }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, k1f, k1g, k1h, k1i }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, k2i }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, KC_NO, k3e, k3f, k3g, k3h, k3i }, \ -} diff --git a/keyboards/converter/sun_usb/command_extra.c b/keyboards/converter/sun_usb/command_extra.c deleted file mode 100644 index 756a9160bb1..00000000000 --- a/keyboards/converter/sun_usb/command_extra.c +++ /dev/null @@ -1,64 +0,0 @@ -#include QMK_KEYBOARD_H -#include "protocol/serial.h" - -bool sun_bell = false; -bool sun_click = false; - - -bool command_extra(uint8_t code) -{ - switch (code) { - case KC_H: - case KC_SLASH: /* ? */ - print("\n\n----- Sun converter Help -----\n"); - print("Home: Toggle Bell\n"); - print("End: Toggle Click\n"); - print("PgUp: LED all On\n"); - print("PgDown: LED all Off\n"); - print("Insert: Layout\n"); - print("Delete: Reset\n"); - return false; - case KC_DEL: - print("Reset\n"); - serial_send(0x01); - break; - case KC_HOME: - sun_bell = !sun_bell; - if (sun_bell) { - print("Bell On\n"); - serial_send(0x02); - } else { - print("Bell Off\n"); - serial_send(0x03); - } - break; - case KC_END: - sun_click = !sun_click; - if (sun_click) { - print("Click On\n"); - serial_send(0x0A); - } else { - print("Click Off\n"); - serial_send(0x0B); - } - break; - case KC_PGUP: - print("LED all on\n"); - serial_send(0x0E); - serial_send(0xFF); - break; - case KC_PGDOWN: - print("LED all off\n"); - serial_send(0x0E); - serial_send(0x00); - break; - case KC_INSERT: - print("layout\n"); - serial_send(0x0F); - break; - default: - xprintf("Unknown extra command: %02X\n", code); - return false; - } - return true; -} diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h deleted file mode 100644 index 7713e0a915b..00000000000 --- a/keyboards/converter/sun_usb/config.h +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#define CUSTOM_MATRIX 2 - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3333 -#define DEVICE_VER 0x0100 -#define MANUFACTURER QMK -#define PRODUCT Sun keyboard converter -#define DESCRIPTION USB converter for Sun type 5 keyboard - -/* matrix size */ -#define MATRIX_ROWS 16 -#define MATRIX_COLS 8 - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \ - get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 1200 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#define SERIAL_SOFT_LOGIC_NEGATIVE -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 2 -#define SERIAL_SOFT_RXD_VECT INT2_vect -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -#include "protocol/serial.h" - -void led_set(uint8_t usb_led) -{ - uint8_t sun_led = 0; - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -#include "protocol/serial.h" - -/* - * Matrix Array usage: - * - * ROW: 16(4bits) - * COL: 8(3bits) - * - * 8bit wide - * +---------+ - * 0|00 ... 07| - * 1|08 ... 0F| - * :| ... | - * :| ... | - * E|70 ... 77| - * F|78 ... 7F| - * +---------+ - */ -static uint8_t matrix[MATRIX_ROWS]; -#define ROW(code) ((code>>3)&0xF) -#define COL(code) (code&0x07) - -static bool is_modified = false; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - /* DDRD |= (1<<6); */ - /* PORTD |= (1<<6); */ - debug_enable = true; - - serial_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - /* // wait for keyboard coming up */ - /* // otherwise LED status update fails */ - /* print("Reseting "); */ - /* while (1) { */ - /* print("."); */ - /* while (serial_recv()); */ - /* serial_send(0x01); */ - /* _delay_ms(500); */ - /* if (serial_recv() == 0xFF) { */ - /* _delay_ms(500); */ - /* if (serial_recv() == 0x04) */ - /* break; */ - /* } */ - /* } */ - /* print(" Done\n"); */ - - /* PORTD &= ~(1<<6); */ - - matrix_init_quantum(); - return; -} - -uint8_t matrix_scan(void) -{ - uint8_t code; - code = serial_recv(); - if (!code) return 0; - - debug_hex(code); debug(" "); - - switch (code) { - case 0xFF: // reset success: FF 04 - print("reset: "); - _delay_ms(500); - code = serial_recv(); - xprintf("%02X\n", code); - if (code == 0x04) { - // LED status - led_set(host_keyboard_leds()); - } - return 0; - case 0xFE: // layout: FE - print("layout: "); - _delay_ms(500); - xprintf("%02X\n", serial_recv()); - return 0; - case 0x7E: // reset fail: 7E 01 - print("reset fail: "); - _delay_ms(500); - xprintf("%02X\n", serial_recv()); - return 0; - case 0x7F: - // all keys up - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - return 0; - } - - if (code&0x80) { - // break code - if (matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] &= ~(1< - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - KC_F10,KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, - KC_F12,KC_F13, KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, - KC_F14,KC_F15, KC_TAB, KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P, KC_LBRC,KC_RBRC, KC_DEL, KC_HOME, KC_UP, KC_PGUP, - KC_F16,KC_F17, KC_LCTL, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_LEFT,KC_INSERT,KC_RIGHT, - KC_F18,KC_F19, KC_LSFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_RCTL, KC_END, KC_DOWN,KC_PGDOWN, - KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI - ), -}; diff --git a/keyboards/converter/sun_usb/type3/rules.mk b/keyboards/converter/sun_usb/type3/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/converter/sun_usb/type3/type3.h b/keyboards/converter/sun_usb/type3/type3.h deleted file mode 100644 index f6f14f4effd..00000000000 --- a/keyboards/converter/sun_usb/type3/type3.h +++ /dev/null @@ -1,66 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef TYPE3_H -#define TYPE3_H - -#include "quantum.h" - -/* Sun type 3 keyboard -,-------. ,-----------------------------------------------------------. ,-----------. -| 01| 03| | 05| 06| 08| 0A| 0C| 0E| 10| 11| 12| 2B| | 15| 16| 17| -|-------| |-----------------------------------------------------------| |-----------| -| 19| 1A| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2D| 2E| 2F| -|-------| |-----------------------------------------------------------| |-----------| -| 31| 33| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42 | | 44| 45| 46| -|-------| |-----------------------------------------------------------| |-----------| -| 48| 49| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| -|-------| |-----------------------------------------------------------| |-----------| -| 5F| 61| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E| 6F| | 70| 71| 72| -`-------' |-----------------------------------------------------------| `-----------' - | 77 | 78 | 79 | 7A | 13 | - `-----------------------------------------------------------' -*/ - - -#define LAYOUT( \ - K01,K03, K05,K06, K08, K0A, K0C, K0E, K10,K11,K12,K2B, K15,K16,K17, \ - K19,K1A, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2D,K2E,K2F, \ - K31,K33, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K42, K44,K45,K46, \ - K48,K49, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K5F,K61, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E,K6F, K70,K71,K72, \ - K77,K78, K79, K7A,K13 \ -) { \ - { KC_NO, K01 , KC_NO, K03 , KC_NO, K05 , K06 , KC_NO }, \ - { K08 , KC_NO, K0A , KC_NO, K0C , KC_NO, K0E , KC_NO }, \ - { K10 , K11 , K12 , K13 , KC_NO, K15 , K16 , K17 }, \ - { KC_NO, K19 , K1A , KC_NO, KC_NO, K1D , K1E , K1F }, \ - { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ - { K28 , K29 , K2A , K2B , KC_NO, K2D , K2E , K2F }, \ - { KC_NO, K31 , KC_NO, K33 , KC_NO, K35 , K36 , K37 }, \ - { K38 , K39 , K3A , K3B , K3C , K3D , K3E , K3F }, \ - { K40 , K41 , K42 , KC_NO, K44 , K45 , K46 , KC_NO }, \ - { K48 , K49 , KC_NO, KC_NO, K4C , K4D , K4E , K4F }, \ - { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ - { K58 , K59 , KC_NO, K5B , K5C , K5D , KC_NO, K5F }, \ - { KC_NO, K61 , KC_NO, K63 , K64 , K65 , K66 , K67 }, \ - { K68 , K69 , K6A , K6B , K6C , K6D , K6E , K6F }, \ - { K70 , K71 , K72 , KC_NO, KC_NO, KC_NO, KC_NO, K77 }, \ - { K78 , K79 , K7A , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ -} - -#endif diff --git a/keyboards/converter/sun_usb/type5/info.json b/keyboards/converter/sun_usb/type5/info.json deleted file mode 100644 index 6785bbc076c..00000000000 --- a/keyboards/converter/sun_usb/type5/info.json +++ /dev/null @@ -1,381 +0,0 @@ -{ - "keyboard_name": "Sun Type 5", - "keyboard_folder": "converter/sun_usb/type5", - "url": "", - "maintainer": "qmk", - "width": 24.75, - "height": 7, - "layouts": { - "LAYOUT_jp_unix": { - "layout": [ - {"label":"HELP", "x":0, "y":0, "w":2}, - {"label":"NO", "x":2.25, "y":0}, - {"label":"F1", "x":4.25, "y":0}, - {"label":"F2", "x":5.25, "y":0}, - {"label":"F3", "x":6.25, "y":0}, - {"label":"F4", "x":7.25, "y":0}, - {"label":"F5", "x":8.75, "y":0}, - {"label":"F6", "x":9.75, "y":0}, - {"label":"F7", "x":10.75, "y":0}, - {"label":"F8", "x":11.75, "y":0}, - {"label":"F9", "x":13.25, "y":0}, - {"label":"F10", "x":14.25, "y":0}, - {"label":"F11", "x":15.25, "y":0}, - {"label":"F12", "x":16.25, "y":0}, - {"label":"PRINT SCREEN", "x":17.5, "y":0}, - {"label":"SCROLL LOCK", "x":18.5, "y":0}, - {"label":"PAUSE", "x":19.5, "y":0}, - {"label":"MUTE", "x":20.75, "y":0}, - {"label":"VOLD", "x":21.75, "y":0}, - {"label":"VOLU", "x":22.75, "y":0}, - {"label":"PWR", "x":23.75, "y":0}, - {"label":"STOP", "x":0, "y":2}, - {"label":"AGAIN", "x":1, "y":2}, - {"label":"ESC", "x":2.25, "y":2}, - {"label":"1", "x":3.25, "y":2}, - {"label":"2", "x":4.25, "y":2}, - {"label":"3", "x":5.25, "y":2}, - {"label":"4", "x":6.25, "y":2}, - {"label":"5", "x":7.25, "y":2}, - {"label":"6", "x":8.25, "y":2}, - {"label":"7", "x":9.25, "y":2}, - {"label":"8", "x":10.25, "y":2}, - {"label":"9", "x":11.25, "y":2}, - {"label":"0", "x":12.25, "y":2}, - {"label":"MINUS", "x":13.25, "y":2}, - {"label":"EQUAL", "x":14.25, "y":2}, - {"label":"BACKSLASH", "x":15.25, "y":2}, - {"label":"GRAVE", "x":16.25, "y":2}, - {"label":"INSERT", "x":17.5, "y":2}, - {"label":"HOME", "x":18.5, "y":2}, - {"label":"PAGE UP", "x":19.5, "y":2}, - {"label":"NUM LOCK", "x":20.75, "y":2}, - {"label":"PSLASH", "x":21.75, "y":2}, - {"label":"PASTERISK", "x":22.75, "y":2}, - {"label":"PMINUS", "x":23.75, "y":2}, - {"label":"MENU", "x":0, "y":3}, - {"label":"UNDO", "x":1, "y":3}, - {"label":"TAB", "x":2.25, "y":3, "w":1.5}, - {"label":"Q", "x":3.75, "y":3}, - {"label":"W", "x":4.75, "y":3}, - {"label":"E", "x":5.75, "y":3}, - {"label":"R", "x":6.75, "y":3}, - {"label":"T", "x":7.75, "y":3}, - {"label":"Y", "x":8.75, "y":3}, - {"label":"U", "x":9.75, "y":3}, - {"label":"I", "x":10.75, "y":3}, - {"label":"O", "x":11.75, "y":3}, - {"label":"P", "x":12.75, "y":3}, - {"label":"LBRACKET", "x":13.75, "y":3}, - {"label":"RBRACKET", "x":14.75, "y":3}, - {"label":"BACKSPACE", "x":15.75, "y":3, "w":1.5}, - {"label":"DELETE", "x":17.5, "y":3}, - {"label":"END", "x":18.5, "y":3}, - {"label":"PAGE DOWN", "x":19.5, "y":3}, - {"label":"P7", "x":20.75, "y":3}, - {"label":"P8", "x":21.75, "y":3}, - {"label":"P9", "x":22.75, "y":3}, - {"label":"PPLUS", "x":23.75, "y":3, "h":2}, - {"label":"SELECT", "x":0, "y":4}, - {"label":"COPY", "x":1, "y":4}, - {"label":"LCTRL", "x":2.25, "y":4, "w":1.75}, - {"label":"A", "x":4, "y":4}, - {"label":"S", "x":5, "y":4}, - {"label":"D", "x":6, "y":4}, - {"label":"F", "x":7, "y":4}, - {"label":"G", "x":8, "y":4}, - {"label":"H", "x":9, "y":4}, - {"label":"J", "x":10, "y":4}, - {"label":"K", "x":11, "y":4}, - {"label":"L", "x":12, "y":4}, - {"label":"SEMICOLON", "x":13, "y":4}, - {"label":"QUOTE", "x":14, "y":4}, - {"label":"ENTER", "x":15, "y":4, "w":2.25}, - {"label":"P4", "x":20.75, "y":4}, - {"label":"P5", "x":21.75, "y":4}, - {"label":"P6", "x":22.75, "y":4}, - {"label":"EXECUTE", "x":0, "y":5}, - {"label":"PASTE", "x":1, "y":5}, - {"label":"LSHIFT", "x":2.25, "y":5, "w":2.25}, - {"label":"Z", "x":4.5, "y":5}, - {"label":"X", "x":5.5, "y":5}, - {"label":"C", "x":6.5, "y":5}, - {"label":"V", "x":7.5, "y":5}, - {"label":"B", "x":8.5, "y":5}, - {"label":"N", "x":9.5, "y":5}, - {"label":"M", "x":10.5, "y":5}, - {"label":"COMMA", "x":11.5, "y":5}, - {"label":"PERIOD", "x":12.5, "y":5}, - {"label":"SLASH", "x":13.5, "y":5}, - {"label":"RSHIFT", "x":14.5, "y":5, "w":2.75}, - {"label":"UP", "x":18.5, "y":5}, - {"label":"P1", "x":20.75, "y":5}, - {"label":"P2", "x":21.75, "y":5}, - {"label":"P3", "x":22.75, "y":5}, - {"label":"PENTER", "x":23.75, "y":5, "h":2}, - {"label":"FIND", "x":0, "y":6}, - {"label":"CUT", "x":1, "y":6}, - {"label":"CAPS LOCK", "x":2.25, "y":6}, - {"label":"LALT", "x":3.25, "y":6}, - {"label":"LGUI", "x":4.25, "y":6}, - {"label":"HENKAN", "x":5.25, "y":6, "w":1.5}, - {"label":"SPACE", "x":6.75, "y":6, "w":5}, - {"label":"MUHENKAN", "x":11.75, "y":6, "w":1.5}, - {"label":"KANA", "x":13.25, "y":6}, - {"label":"RGUI", "x":14.25, "y":6}, - {"label":"APP", "x":15.25, "y":6}, - {"label":"RALT", "x":16.25, "y":6}, - {"label":"LEFT", "x":17.5, "y":6}, - {"label":"DOWN", "x":18.5, "y":6}, - {"label":"RIGHT", "x":19.5, "y":6}, - {"label":"P0", "x":20.75, "y":6, "w":2}, - {"label":"PDOT", "x":22.75, "y":6} - ] - }, - "LAYOUT_us_unix": { - "layout": [ - {"label":"HELP", "x":0, "y":0, "w":2}, - {"label":"NO", "x":2.25, "y":0}, - {"label":"F1", "x":4.25, "y":0}, - {"label":"F2", "x":5.25, "y":0}, - {"label":"F3", "x":6.25, "y":0}, - {"label":"F4", "x":7.25, "y":0}, - {"label":"F5", "x":8.75, "y":0}, - {"label":"F6", "x":9.75, "y":0}, - {"label":"F7", "x":10.75, "y":0}, - {"label":"F8", "x":11.75, "y":0}, - {"label":"F9", "x":13.25, "y":0}, - {"label":"F10", "x":14.25, "y":0}, - {"label":"F11", "x":15.25, "y":0}, - {"label":"F12", "x":16.25, "y":0}, - {"label":"PRINT SCREEN", "x":17.5, "y":0}, - {"label":"SCROLL LOCK", "x":18.5, "y":0}, - {"label":"PAUSE", "x":19.5, "y":0}, - {"label":"MUTE", "x":20.75, "y":0}, - {"label":"VOLD", "x":21.75, "y":0}, - {"label":"VOLU", "x":22.75, "y":0}, - {"label":"PWR", "x":23.75, "y":0}, - {"label":"STOP", "x":0, "y":2}, - {"label":"AGAIN", "x":1, "y":2}, - {"label":"ESC", "x":2.25, "y":2}, - {"label":"1", "x":3.25, "y":2}, - {"label":"2", "x":4.25, "y":2}, - {"label":"3", "x":5.25, "y":2}, - {"label":"4", "x":6.25, "y":2}, - {"label":"5", "x":7.25, "y":2}, - {"label":"6", "x":8.25, "y":2}, - {"label":"7", "x":9.25, "y":2}, - {"label":"8", "x":10.25, "y":2}, - {"label":"9", "x":11.25, "y":2}, - {"label":"0", "x":12.25, "y":2}, - {"label":"MINUS", "x":13.25, "y":2}, - {"label":"EQUAL", "x":14.25, "y":2}, - {"label":"BACKSLASH", "x":15.25, "y":2}, - {"label":"GRAVE", "x":16.25, "y":2}, - {"label":"INSERT", "x":17.5, "y":2}, - {"label":"HOME", "x":18.5, "y":2}, - {"label":"PAGE UP", "x":19.5, "y":2}, - {"label":"NUM LOCK", "x":20.75, "y":2}, - {"label":"PSLASH", "x":21.75, "y":2}, - {"label":"PASTERISK", "x":22.75, "y":2}, - {"label":"PMINUS", "x":23.75, "y":2}, - {"label":"MENU", "x":0, "y":3}, - {"label":"UNDO", "x":1, "y":3}, - {"label":"TAB", "x":2.25, "y":3, "w":1.5}, - {"label":"Q", "x":3.75, "y":3}, - {"label":"W", "x":4.75, "y":3}, - {"label":"E", "x":5.75, "y":3}, - {"label":"R", "x":6.75, "y":3}, - {"label":"T", "x":7.75, "y":3}, - {"label":"Y", "x":8.75, "y":3}, - {"label":"U", "x":9.75, "y":3}, - {"label":"I", "x":10.75, "y":3}, - {"label":"O", "x":11.75, "y":3}, - {"label":"P", "x":12.75, "y":3}, - {"label":"LBRACKET", "x":13.75, "y":3}, - {"label":"RBRACKET", "x":14.75, "y":3}, - {"label":"BACKSPACE", "x":15.75, "y":3, "w":1.5}, - {"label":"DELETE", "x":17.5, "y":3}, - {"label":"END", "x":18.5, "y":3}, - {"label":"PAGE DOWN", "x":19.5, "y":3}, - {"label":"P7", "x":20.75, "y":3}, - {"label":"P8", "x":21.75, "y":3}, - {"label":"P9", "x":22.75, "y":3}, - {"label":"PPLUS", "x":23.75, "y":3, "h":2}, - {"label":"SELECT", "x":0, "y":4}, - {"label":"COPY", "x":1, "y":4}, - {"label":"LCTRL", "x":2.25, "y":4, "w":1.75}, - {"label":"A", "x":4, "y":4}, - {"label":"S", "x":5, "y":4}, - {"label":"D", "x":6, "y":4}, - {"label":"F", "x":7, "y":4}, - {"label":"G", "x":8, "y":4}, - {"label":"H", "x":9, "y":4}, - {"label":"J", "x":10, "y":4}, - {"label":"K", "x":11, "y":4}, - {"label":"L", "x":12, "y":4}, - {"label":"SEMICOLON", "x":13, "y":4}, - {"label":"QUOTE", "x":14, "y":4}, - {"label":"ENTER", "x":15, "y":4, "w":2.25}, - {"label":"P4", "x":20.75, "y":4}, - {"label":"P5", "x":21.75, "y":4}, - {"label":"P6", "x":22.75, "y":4}, - {"label":"EXECUTE", "x":0, "y":5}, - {"label":"PASTE", "x":1, "y":5}, - {"label":"LSHIFT", "x":2.25, "y":5, "w":2.25}, - {"label":"Z", "x":4.5, "y":5}, - {"label":"X", "x":5.5, "y":5}, - {"label":"C", "x":6.5, "y":5}, - {"label":"V", "x":7.5, "y":5}, - {"label":"B", "x":8.5, "y":5}, - {"label":"N", "x":9.5, "y":5}, - {"label":"M", "x":10.5, "y":5}, - {"label":"COMMA", "x":11.5, "y":5}, - {"label":"PERIOD", "x":12.5, "y":5}, - {"label":"SLASH", "x":13.5, "y":5}, - {"label":"RSHIFT", "x":14.5, "y":5, "w":2.75}, - {"label":"UP", "x":18.5, "y":5}, - {"label":"P1", "x":20.75, "y":5}, - {"label":"P2", "x":21.75, "y":5}, - {"label":"P3", "x":22.75, "y":5}, - {"label":"PENTER", "x":23.75, "y":5, "h":2}, - {"label":"FIND", "x":0, "y":6}, - {"label":"CUT", "x":1, "y":6}, - {"label":"CAPS LOCK", "x":2.25, "y":6, "w":1.75}, - {"label":"LALT", "x":4, "y":6}, - {"label":"LGUI", "x":5, "y":6}, - {"label":"SPACE", "x":6, "y":6, "w":8.25}, - {"label":"RGUI", "x":14.25, "y":6}, - {"label":"APP", "x":15.25, "y":6}, - {"label":"RALT", "x":16.25, "y":6}, - {"label":"LEFT", "x":17.5, "y":6}, - {"label":"DOWN", "x":18.5, "y":6}, - {"label":"RIGHT", "x":19.5, "y":6}, - {"label":"P0", "x":20.75, "y":6, "w":2}, - {"label":"PDOT", "x":22.75, "y":6} - ] - }, - "LAYOUT_ansi": { - "layout": [ - {"label":"HELP", "x":0, "y":0, "w":2}, - {"label":"ESC", "x":2.25, "y":0}, - {"label":"F1", "x":4.25, "y":0}, - {"label":"F2", "x":5.25, "y":0}, - {"label":"F3", "x":6.25, "y":0}, - {"label":"F4", "x":7.25, "y":0}, - {"label":"F5", "x":8.75, "y":0}, - {"label":"F6", "x":9.75, "y":0}, - {"label":"F7", "x":10.75, "y":0}, - {"label":"F8", "x":11.75, "y":0}, - {"label":"F9", "x":13.25, "y":0}, - {"label":"F10", "x":14.25, "y":0}, - {"label":"F11", "x":15.25, "y":0}, - {"label":"F12", "x":16.25, "y":0}, - {"label":"PRINT SCREEN", "x":17.5, "y":0}, - {"label":"SCROLL LOCK", "x":18.5, "y":0}, - {"label":"PAUSE", "x":19.5, "y":0}, - {"label":"MUTE", "x":20.75, "y":0}, - {"label":"VOLD", "x":21.75, "y":0}, - {"label":"VOLU", "x":22.75, "y":0}, - {"label":"PWR", "x":23.75, "y":0}, - {"label":"STOP", "x":0, "y":2}, - {"label":"AGAIN", "x":1, "y":2}, - {"label":"GRAVE", "x":2.25, "y":2}, - {"label":"1", "x":3.25, "y":2}, - {"label":"2", "x":4.25, "y":2}, - {"label":"3", "x":5.25, "y":2}, - {"label":"4", "x":6.25, "y":2}, - {"label":"5", "x":7.25, "y":2}, - {"label":"6", "x":8.25, "y":2}, - {"label":"7", "x":9.25, "y":2}, - {"label":"8", "x":10.25, "y":2}, - {"label":"9", "x":11.25, "y":2}, - {"label":"0", "x":12.25, "y":2}, - {"label":"MINUS", "x":13.25, "y":2}, - {"label":"EQUAL", "x":14.25, "y":2}, - {"label":"BACKSPACE", "x":15.25, "y":2, "w":2}, - {"label":"INSERT", "x":17.5, "y":2}, - {"label":"HOME", "x":18.5, "y":2}, - {"label":"PAGE UP", "x":19.5, "y":2}, - {"label":"NUM LOCK", "x":20.75, "y":2}, - {"label":"PSLASH", "x":21.75, "y":2}, - {"label":"PASTERISK", "x":22.75, "y":2}, - {"label":"PMINUS", "x":23.75, "y":2}, - {"label":"MENU", "x":0, "y":3}, - {"label":"UNDO", "x":1, "y":3}, - {"label":"TAB", "x":2.25, "y":3, "w":1.5}, - {"label":"Q", "x":3.75, "y":3}, - {"label":"W", "x":4.75, "y":3}, - {"label":"E", "x":5.75, "y":3}, - {"label":"R", "x":6.75, "y":3}, - {"label":"T", "x":7.75, "y":3}, - {"label":"Y", "x":8.75, "y":3}, - {"label":"U", "x":9.75, "y":3}, - {"label":"I", "x":10.75, "y":3}, - {"label":"O", "x":11.75, "y":3}, - {"label":"P", "x":12.75, "y":3}, - {"label":"LBRACKET", "x":13.75, "y":3}, - {"label":"RBRACKET", "x":14.75, "y":3}, - {"label":"BACKSLASH", "x":15.75, "y":3, "w":1.5}, - {"label":"DELETE", "x":17.5, "y":3}, - {"label":"END", "x":18.5, "y":3}, - {"label":"PAGE DOWN", "x":19.5, "y":3}, - {"label":"P7", "x":20.75, "y":3}, - {"label":"P8", "x":21.75, "y":3}, - {"label":"P9", "x":22.75, "y":3}, - {"label":"PPLUS", "x":23.75, "y":3, "h":2}, - {"label":"SELECT", "x":0, "y":4}, - {"label":"COPY", "x":1, "y":4}, - {"label":"CAPS LOCK", "x":2.25, "y":4, "w":1.75}, - {"label":"A", "x":4, "y":4}, - {"label":"S", "x":5, "y":4}, - {"label":"D", "x":6, "y":4}, - {"label":"F", "x":7, "y":4}, - {"label":"G", "x":8, "y":4}, - {"label":"H", "x":9, "y":4}, - {"label":"J", "x":10, "y":4}, - {"label":"K", "x":11, "y":4}, - {"label":"L", "x":12, "y":4}, - {"label":"SEMICOLON", "x":13, "y":4}, - {"label":"QUOTE", "x":14, "y":4}, - {"label":"ENTER", "x":15, "y":4, "w":2.25}, - {"label":"P4", "x":20.75, "y":4}, - {"label":"P5", "x":21.75, "y":4}, - {"label":"P6", "x":22.75, "y":4}, - {"label":"EXECUTE", "x":0, "y":5}, - {"label":"PASTE", "x":1, "y":5}, - {"label":"LSHIFT", "x":2.25, "y":5, "w":2.25}, - {"label":"Z", "x":4.5, "y":5}, - {"label":"X", "x":5.5, "y":5}, - {"label":"C", "x":6.5, "y":5}, - {"label":"V", "x":7.5, "y":5}, - {"label":"B", "x":8.5, "y":5}, - {"label":"N", "x":9.5, "y":5}, - {"label":"M", "x":10.5, "y":5}, - {"label":"COMMA", "x":11.5, "y":5}, - {"label":"PERIOD", "x":12.5, "y":5}, - {"label":"SLASH", "x":13.5, "y":5}, - {"label":"RSHIFT", "x":14.5, "y":5, "w":2.75}, - {"label":"UP", "x":18.5, "y":5}, - {"label":"P1", "x":20.75, "y":5}, - {"label":"P2", "x":21.75, "y":5}, - {"label":"P3", "x":22.75, "y":5}, - {"label":"PENTER", "x":23.75, "y":5, "h":2}, - {"label":"FIND", "x":0, "y":6}, - {"label":"CUT", "x":1, "y":6}, - {"label":"LCTRL", "x":2.25, "y":6, "w":1.75}, - {"label":"LALT", "x":4, "y":6}, - {"label":"LGUI", "x":5, "y":6}, - {"label":"SPACE", "x":6, "y":6, "w":8.25}, - {"label":"RGUI", "x":14.25, "y":6}, - {"label":"APP", "x":15.25, "y":6}, - {"label":"RALT", "x":16.25, "y":6}, - {"label":"LEFT", "x":17.5, "y":6}, - {"label":"DOWN", "x":18.5, "y":6}, - {"label":"RIGHT", "x":19.5, "y":6}, - {"label":"P0", "x":20.75, "y":6, "w":2}, - {"label":"PDOT", "x":22.75, "y":6} - ] - } - } -} diff --git a/keyboards/converter/sun_usb/type5/keymaps/default/keymap.c b/keyboards/converter/sun_usb/type5/keymaps/default/keymap.c deleted file mode 100644 index 5e04ff4b3b8..00000000000 --- a/keyboards/converter/sun_usb/type5/keymaps/default/keymap.c +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* LAYOUT_jp_unix is a superset of the other layouts, hence the default */ - LAYOUT_jp_unix( - KC_HELP, KC_NO, KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, KC_MUTE,KC_VOLD,KC_VOLU,KC_PWR, - KC_STOP, KC_AGAIN, KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV, KC_INS, KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, - KC_MENU, KC_UNDO, KC_TAB, KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC, KC_BSPC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_SELECT, KC_COPY, KC_LCTL, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, - KC_EXECUTE,KC_PASTE, KC_LSFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_FIND, KC_CUT, KC_CAPS,KC_LALT,KC_LGUI,KC_HENK, KC_SPC, KC_MHEN,KC_KANA,KC_RGUI,KC_APP,KC_RALT, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT - ), -}; diff --git a/keyboards/converter/sun_usb/type5/keymaps/sigma/keymap.c b/keyboards/converter/sun_usb/type5/keymaps/sigma/keymap.c deleted file mode 100644 index 1c7ea3efc21..00000000000 --- a/keyboards/converter/sun_usb/type5/keymaps/sigma/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -/* -Copyright 2018 Yann Hodique @sigma - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H -#include "sigma.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = - { - [_QWERTY] = LAYOUT_us_unix( - KC_LEAD, KC_SCRT, KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, KC_MUTE,KC_VOLD,KC_VOLU,KC_OS_LOCK, - KC_STOP, KC_OS_REDO, KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV, KC_INS, KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, - VRSN, KC_OS_UNDO, KC_TAB, KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC, KC_BSPC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_MAKE, KC_OS_COPY, KC_LCTL, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, - KC_EXECUTE,KC_OS_PASTE, KC_LSFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, - KC_FIND, KC_OS_CUT, KC_CAPS,KC_LGUI,KC_LALT, KC_SPC, KC_RGUI,KC_APP,KC_RALT, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT - ), - }; diff --git a/keyboards/converter/sun_usb/type5/keymaps/sigma/readme.md b/keyboards/converter/sun_usb/type5/keymaps/sigma/readme.md deleted file mode 100644 index 6ae011f8668..00000000000 --- a/keyboards/converter/sun_usb/type5/keymaps/sigma/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -Overview -======== - -This is my personal Sun Type 5 configuration. - -How to build ------------- - - make converter/sun_usb/type5:sigma:teensy - -Layers ------- diff --git a/keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk b/keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk deleted file mode 100644 index 09a3af829a6..00000000000 --- a/keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk +++ /dev/null @@ -1 +0,0 @@ -BOOTLOADER = halfkay diff --git a/keyboards/converter/sun_usb/type5/rules.mk b/keyboards/converter/sun_usb/type5/rules.mk deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/converter/sun_usb/type5/type5.h b/keyboards/converter/sun_usb/type5/type5.h deleted file mode 100644 index da66d80abc8..00000000000 --- a/keyboards/converter/sun_usb/type5/type5.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - Copyright 2012 Jun Wako - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#ifndef TYPE5_H -#define TYPE5_H - -#include "quantum.h" - -/* sun type 5 keyboard, JP Unix-style -,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------. -| 76 | | 0F| | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30| -`-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------' -,-------. ,-----------------------------------------------------------. ,-----------. ,---------------. -| 01| 03| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2C| 34| 60| | 62| 2E| 2F| 47| -|-------| |-----------------------------------------------------------| |------------ |---------------| -| 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B | | 42| 4A| 7B| | 44| 45| 46| | -|-------| |-----------------------------------------------------------| `-----------' |-----------| 7D| -| 31| 33| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| | -|-------| |-----------------------------------------------------------| ,---. |-----------|---| -| 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| | -|-------| |-----------------------------------------------------------| .-----------. |-----------| 5A| -| 5F| 61| | 77 | 13| 78 |*73 | 79 |*74 |*75| 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| | -`-------' `-----------------------------------------------------------' `-----------' `---------------' -*/ -#define LAYOUT_jp_unix( \ - K76, K0F, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \ - K01,K03, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C,K34,K60, K62,K2E,K2F,K47, \ - K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42,K4A,K7B, K44,K45,K46,K7D, \ - K31,K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \ - K5F,K61, K77,K13, K78, K73, K79, K74, K75, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \ -) { \ - { KC_NO, K01 , K02 , K03 , K04 , K05 , K06 , K07 }, \ - { K08 , K09 , K0A , K0B , K0C , K0D , K0E , K0F ,}, \ - { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 }, \ - { K18 , K19 , K1A , K1B , K1C , K1D , K1E , K1F }, \ - { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ - { K28 , K29 , K2A , K2B , K2C , K2D , K2E , K2F }, \ - { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 }, \ - { K38 , K39 , K3A , K3B , K3C , K3D , K3E , K3F }, \ - { K40 , K41 , K42 , K43 , K44 , K45 , K46 , K47 }, \ - { K48 , K49 , K4A , KC_NO, K4C , K4D , K4E , K4F }, \ - { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ - { K58 , K59 , K5A , K5B , K5C , K5D , K5E , K5F }, \ - { K60 , K61 , K62 , K63 , K64 , K65 , K66 , K67 }, \ - { K68 , K69 , K6A , K6B , K6C , K6D , K6E , KC_NO }, \ - { K70 , K71 , K72 , K73 , K74 , K75 , K76 , K77 }, \ - { K78 , K79 , K7A , K7B , KC_NO, K7D , KC_NO, KC_NO } \ -} - -/* Sun type 5 keyboard, US Unix-style -,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------. -| 76 | | 0F| | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30| -`-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------' -,-------. ,-----------------------------------------------------------. ,-----------. ,---------------. -| 01| 03| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2C| 34| 60| | 62| 2E| 2F| 47| -|-------| |-----------------------------------------------------------| |------------ |---------------| -| 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B | | 42| 4A| 7B| | 44| 45| 46| | -|-------| |-----------------------------------------------------------| `-----------' |-----------| 7D| -| 31| 33| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| | -|-------| |-----------------------------------------------------------| ,---. |-----------|---| -| 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| | -|-------| |-----------------------------------------------------------| .-----------. |-----------| 5A| -| 5F| 61| | 77 | 13| 78 | 79 | 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| | -`-------' `-----------------------------------------------------------' `-----------' `---------------' -*/ -#define LAYOUT_us_unix( \ - K76, K0F, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \ - K01,K03, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C,K34,K60, K62,K2E,K2F,K47, \ - K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42,K4A,K7B, K44,K45,K46,K7D, \ - K31,K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \ - K5F,K61, K77,K13, K78, K79, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \ -) { \ - { KC_NO, K01 , K02 , K03 , K04 , K05 , K06 , K07 }, \ - { K08 , K09 , K0A , K0B , K0C , K0D , K0E , K0F ,}, \ - { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 }, \ - { K18 , K19 , K1A , K1B , K1C , K1D , K1E , K1F }, \ - { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ - { K28 , K29 , K2A , K2B , K2C , K2D , K2E , K2F }, \ - { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 }, \ - { K38 , K39 , K3A , K3B , K3C , K3D , K3E , K3F }, \ - { K40 , K41 , K42 , K43 , K44 , K45 , K46 , K47 }, \ - { K48 , K49 , K4A , KC_NO, K4C , K4D , K4E , K4F }, \ - { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ - { K58 , K59 , K5A , K5B , K5C , K5D , K5E , K5F }, \ - { K60 , K61 , K62 , K63 , K64 , K65 , K66 , K67 }, \ - { K68 , K69 , K6A , K6B , K6C , K6D , K6E , KC_NO }, \ - { K70 , K71 , K72 , KC_NO, KC_NO, KC_NO, K76 , K77 }, \ - { K78 , K79 , K7A , K7B , KC_NO, K7D , KC_NO, KC_NO } \ -} - -/* Sun type 5 keyboard, US ANSI-style - ,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------. - | 76 | | 1D| | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30| - `-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------' - ,-------. ,-----------------------------------------------------------. ,-----------. ,---------------. - | 01| 03| | 2A| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2B | | 2C| 34| 60| | 62| 2E| 2F| 47| - |-------| |-----------------------------------------------------------| |------------ |---------------| - | 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 58 | | 42| 4A| 7B| | 44| 45| 46| | - |-------| |-----------------------------------------------------------| `-----------' |-----------| 7D| - | 31| 33| | 77 | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| | - |-------| |-----------------------------------------------------------| ,---. |-----------|---| - | 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| | - |-------| |-----------------------------------------------------------| .-----------. |-----------| 5A| - | 5F| 61| | 4C | 13| 78 | 79 | 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| | - `-------' `-----------------------------------------------------------' `-----------' `---------------' -*/ -#define LAYOUT_ansi( \ - K76, K1D, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \ - K01,K03, K2A,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29, K2B, K2C,K34,K60, K62,K2E,K2F,K47, \ - K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K58, K42,K4A,K7B, K44,K45,K46,K7D, \ - K31,K33, K77, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \ - K5F,K61, K4C,K13, K78, K79, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \ -) { \ - { KC_NO, K01 , K02 , K03 , K04 , K05 , K06 , K07 }, \ - { K08 , K09 , K0A , K0B , K0C , K0D , K0E , KC_NO,}, \ - { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 }, \ - { K18 , K19 , K1A , K1B , K1C , K1D , K1E , K1F }, \ - { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ - { K28 , K29 , K2A , K2B , K2C , K2D , K2E , K2F }, \ - { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 }, \ - { K38 , K39 , K3A , K3B , K3C , K3D , K3E , K3F }, \ - { K40 , K41 , K42 , K43 , K44 , K45 , K46 , K47 }, \ - { K48 , K49 , K4A , KC_NO, K4C , K4D , K4E , K4F }, \ - { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ - { K58 , K59 , K5A , K5B , K5C , K5D , K5E , K5F }, \ - { K60 , K61 , K62 , K63 , K64 , K65 , K66 , K67 }, \ - { K68 , K69 , K6A , K6B , K6C , K6D , K6E , KC_NO }, \ - { K70 , K71 , K72 , KC_NO, KC_NO, KC_NO, K76 , K77 }, \ - { K78 , K79 , K7A , K7B , KC_NO, K7D , KC_NO, KC_NO } \ -} -#endif diff --git a/keyboards/converter/usb_usb/README.md b/keyboards/converter/usb_usb/README.md deleted file mode 100644 index 64334a85fba..00000000000 --- a/keyboards/converter/usb_usb/README.md +++ /dev/null @@ -1,79 +0,0 @@ -USB to USB keyboard protocol converter -====================================== -A small device to connect between your USB keyboard and your PC that makes (almost) every keyboard fully programmable. -Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb). Ported to QMK by [Balz Guenat](https://github.com/BalzGuenat). - -Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat) -Hardware Supported: [Hasu's USB-USB converter](https://geekhack.org/index.php?topic=69169.0), [Pro Micro + USB Host Shield](https://geekhack.org/index.php?topic=80421.0), maybe more -Hardware Availability: [GH thread](https://geekhack.org/index.php?topic=72052.0), self-built - -Make example for this keyboard (after setting up your build environment): - - make converter/usb_usb:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -Note that you have to choose the right hardware variant as your subproject, otherwise you will probably have issues. - -Troubleshooting & Known Issues ------------------------------- -If something doesn't work, it's probably because of the CPU clock. -Be sure to select the correct subproject (the middle part of the `make` argument) according to your hardware. -If you are sure you have this correct, try changeing the default in `usb_usb/rules.mk` or overriding the value in the `rules.mk` of your keymap. - -The Pro Micro variant uses a 3.3V Pro Micro and thus runs at 8MHz, hence the following line in `usb_usb/pro_micro/rules.mk`: -`F_CPU = 8000000` -The converter sold by Hasu runs at 16MHz and so the corresponding line in `usb_usb/hasu/rules.mk` is: -`F_CPU = 16000000` - -Getting the Hardware --------------------- -There are two options to get a converter: You can buy one from Hasu or build one yourself. - -### Buy a Converter -You can buy a fully assembled converter from me here: -https://geekhack.org/index.php?topic=69169.0 - -### Build one yourself using Arduino Leonardo + Circuit@Home USB Host Shield 2.0 -Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron. -http://arduino.cc/en/Main/ArduinoBoardLeonardo -https://www.circuitsathome.com/arduino_usb_host_shield_projects/ - -Other compatible boards like Arduino's Shield will also work well but I think Sparkfun's needs to be modified. -http://arduino.cc/en/Main/ArduinoUSBHostShield -https://www.sparkfun.com/products/9947 - -Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing. -[Build guide](https://geekhack.org/index.php?topic=80421.0) -https://www.circuitsathome.com/arduino_usb_host_shield_projects/ -https://www.sparkfun.com/products/12587 -https://www.pjrc.com/teensy/td_libs_USBHostShield.html - -Limitations ----------- -Only supports 'HID Boot protocol'. -Note that the converter can host only USB "boot protocol" keyboard(6KRO), not NKRO, it is possible to support NKRO keyboard but you will need to write HID report parser for that. Every NKRO keyboard can have different HID report and it is difficult to support all kind of NKRO keyboards in the market. - -Resources --------- -Hasu's main thread for the converter - https://geekhack.org/index.php?topic=69169.0 -Build guide for the Pro Micro variant - https://geekhack.org/index.php?topic=80421.0 -Original TMK version of the converter - https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb -USB Host Shield 2.0 - https://www.circuitsathome.com/arduino_usb_host_shield_projects/ -USB Host Shield 2.0 source - https://github.com/felis/USB_Host_Shield_2.0 -Arduino USB Host Shield (with bootst converter) - http://arduino.cc/en/Main/ArduinoUSBHostShield -Arduino source - https://github.com/arduino/Arduino -Initial release of TMK USB-USB converter - https://geekhack.org/index.php?topic=33057.msg653549#msg653549 - http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854 -Arduino-based hardware keyboard remapper - Colemak forum - http://forum.colemak.com/viewtopic.php?id=1561 -Teensy + Host Shield - http://www.pjrc.com/teensy/td_libs_USBHostShield.html diff --git a/keyboards/converter/usb_usb/ble/README.md b/keyboards/converter/usb_usb/ble/README.md deleted file mode 100644 index 0ee7223fd4b..00000000000 --- a/keyboards/converter/usb_usb/ble/README.md +++ /dev/null @@ -1,30 +0,0 @@ -QMK BLE Adapter -=============== -A small device that reads USB keyboard input and passes it on over Bluetooth LE HID. - -![Picture of Adapter](https://i.imgur.com/O3VwBBJ.png) - -Hardware --------- -The hardware is relatively easy to assemble. Just follow the schematic and don't forget to [cut the VBUS jumper](https://www.pjrc.com/teensy/td_libs_USBHostShield_4a.jpg). - -Schematic: -![Schematic](https://i.imgur.com/s1Ia9We.png) - -Part list: -* [Adafruit Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) -* [USB Host Mini](https://www.circuitsathome.com/arduino_usb_host_shield_projects/) -* [Pololu 5V Step-Up Voltage Regulator U3V12F5](https://www.pololu.com/product/2115) -* [Lithium Ion Battery - 3.7v 2000mAh](https://www.adafruit.com/product/2011) -* Some sort of switch to be able to turn it off - -Building and Flashing ---------------------- - -``` -make converter-usb_usb-ble -``` - -``` -make converter-usb_usb-ble-avrdude -``` \ No newline at end of file diff --git a/keyboards/converter/usb_usb/ble/ble.c b/keyboards/converter/usb_usb/ble/ble.c deleted file mode 100644 index 387eb8166c0..00000000000 --- a/keyboards/converter/usb_usb/ble/ble.c +++ /dev/null @@ -1 +0,0 @@ -#include "ble.h" diff --git a/keyboards/converter/usb_usb/ble/ble.h b/keyboards/converter/usb_usb/ble/ble.h deleted file mode 100644 index d28629643a9..00000000000 --- a/keyboards/converter/usb_usb/ble/ble.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BLE_H -#define BLE_H - -#include QMK_KEYBOARD_H - -#endif diff --git a/keyboards/converter/usb_usb/ble/config.h b/keyboards/converter/usb_usb/ble/config.h deleted file mode 100644 index 3bf3b2963a8..00000000000 --- a/keyboards/converter/usb_usb/ble/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#undef PRODUCT -#define PRODUCT QMK BLE Adapter -#undef DESCRIPTION -#define DESCRIPTION - -// Turn off the mode leds on the BLE module -#define ADAFRUIT_BLE_ENABLE_MODE_LEDS 0 -#define ADAFRUIT_BLE_ENABLE_POWER_LED 0 - -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION -#define NO_ACTION_ONESHOT - diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk deleted file mode 100644 index f5ab3880bfc..00000000000 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ /dev/null @@ -1,23 +0,0 @@ -BLUETOOTH = AdafruitBLE -ADAFRUIT_BLE_ENABLE = yes -F_CPU = 8000000 - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -EXTRAFLAGS += -flto diff --git a/keyboards/converter/usb_usb/config.h b/keyboards/converter/usb_usb/config.h deleted file mode 100644 index fdaf42eda49..00000000000 --- a/keyboards/converter/usb_usb/config.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2017 Balz Guenat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -// do not #include "config_common.h" because the pin names conflict with the USB HID code. -// CUSTOM_MATRIX is defined it that file, though, and we need it, so we define it ourselves. -// It's a hack, yeah... - -#define CUSTOM_MATRIX 2 - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x005B -#define DEVICE_VER 0x0001 -#define MANUFACTURER QMK -#define PRODUCT QMK USB-USB Converter -#define DESCRIPTION USB to USB Keyboard Converter with QMK - -/* size of virtual matrix */ -#define MATRIX_ROWS 16 -#define MATRIX_COLS 16 - -/* matrix scanning is done in custom_matrix.cpp */ -//#define DIODE_DIRECTION - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp deleted file mode 100644 index 6f381aabf40..00000000000 --- a/keyboards/converter/usb_usb/custom_matrix.cpp +++ /dev/null @@ -1,262 +0,0 @@ -/* -Copyright 2016 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -// USB HID host -#include "Usb.h" -#include "usbhub.h" -#include "hid.h" -#include "hidboot.h" -#include "parser.h" - -#include "keycode.h" -#include "util.h" -#include "print.h" -#include "debug.h" -#include "timer.h" -#include "matrix.h" -#include "led.h" -#include "host.h" -#include "keyboard.h" - -extern "C" { -#include "quantum.h" -} - -/* KEY CODE to Matrix - * - * HID keycode(1 byte): - * Higher 5 bits indicates ROW and lower 3 bits COL. - * - * 7 6 5 4 3 2 1 0 - * +---------------+ - * | ROW | COL | - * +---------------+ - * - * Matrix space(16 * 16): - * r\c0123456789ABCDEF - * 0 +----------------+ - * : | | - * : | | - * 16 +----------------+ - */ -#define ROW_MASK 0xF0 -#define COL_MASK 0x0F -#define CODE(row, col) (((row) << 4) | (col)) -#define ROW(code) (((code) & ROW_MASK) >> 4) -#define COL(code) ((code) & COL_MASK) -#define ROW_BITS(code) (1 << COL(code)) - - -// Integrated key state of all keyboards -static report_keyboard_t local_keyboard_report; - -static bool matrix_is_mod = false; - -/* - * USB Host Shield HID keyboards - * This supports two cascaded hubs and four keyboards - */ -USB usb_host; -USBHub hub1(&usb_host); -USBHub hub2(&usb_host); -HIDBoot kbd1(&usb_host); -HIDBoot kbd2(&usb_host); -HIDBoot kbd3(&usb_host); -HIDBoot kbd4(&usb_host); -KBDReportParser kbd_parser1; -KBDReportParser kbd_parser2; -KBDReportParser kbd_parser3; -KBDReportParser kbd_parser4; - - -extern "C" -{ - uint8_t matrix_rows(void) { return MATRIX_ROWS; } - uint8_t matrix_cols(void) { return MATRIX_COLS; } - bool matrix_has_ghost(void) { return false; } - void matrix_init(void) { - // USB Host Shield setup - usb_host.Init(); - kbd1.SetReportParser(0, (HIDReportParser*)&kbd_parser1); - kbd2.SetReportParser(0, (HIDReportParser*)&kbd_parser2); - kbd3.SetReportParser(0, (HIDReportParser*)&kbd_parser3); - kbd4.SetReportParser(0, (HIDReportParser*)&kbd_parser4); - matrix_init_quantum(); - } - - static void or_report(report_keyboard_t report) { - // integrate reports into local_keyboard_report - local_keyboard_report.mods |= report.mods; - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - if (IS_ANY(report.keys[i])) { - for (uint8_t j = 0; j < KEYBOARD_REPORT_KEYS; j++) { - if (! local_keyboard_report.keys[j]) { - local_keyboard_report.keys[j] = report.keys[i]; - break; - } - } - } - } - } - - __attribute__ ((weak)) - void matrix_init_kb(void) { - matrix_init_user(); - } - - __attribute__ ((weak)) - void matrix_init_user(void) { - } - - __attribute__ ((weak)) - void matrix_scan_kb(void) { - matrix_scan_user(); - } - - __attribute__ ((weak)) - void matrix_scan_user(void) { - } - - uint8_t matrix_scan(void) { - static uint16_t last_time_stamp1 = 0; - static uint16_t last_time_stamp2 = 0; - static uint16_t last_time_stamp3 = 0; - static uint16_t last_time_stamp4 = 0; - - // check report came from keyboards - if (kbd_parser1.time_stamp != last_time_stamp1 || - kbd_parser2.time_stamp != last_time_stamp2 || - kbd_parser3.time_stamp != last_time_stamp3 || - kbd_parser4.time_stamp != last_time_stamp4) { - - last_time_stamp1 = kbd_parser1.time_stamp; - last_time_stamp2 = kbd_parser2.time_stamp; - last_time_stamp3 = kbd_parser3.time_stamp; - last_time_stamp4 = kbd_parser4.time_stamp; - - // clear and integrate all reports - local_keyboard_report = {}; - or_report(kbd_parser1.report); - or_report(kbd_parser2.report); - or_report(kbd_parser3.report); - or_report(kbd_parser4.report); - - matrix_is_mod = true; - - dprintf("state: %02X %02X", local_keyboard_report.mods, local_keyboard_report.reserved); - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - dprintf(" %02X", local_keyboard_report.keys[i]); - } - dprint("\r\n"); - } else { - matrix_is_mod = false; - } - - uint16_t timer; - timer = timer_read(); - usb_host.Task(); - timer = timer_elapsed(timer); - if (timer > 100) { - dprintf("host.Task: %d\n", timer); - } - - static uint8_t usb_state = 0; - if (usb_state != usb_host.getUsbTaskState()) { - usb_state = usb_host.getUsbTaskState(); - dprintf("usb_state: %02X\n", usb_state); - - // restore LED state when keyboard comes up - if (usb_state == USB_STATE_RUNNING) { - dprintf("speed: %s\n", usb_host.getVbusState()==FSHOST ? "full" : "low"); - keyboard_set_leds(host_keyboard_leds()); - } - } - matrix_scan_quantum(); - return 1; - } - - bool matrix_is_modified(void) { - return matrix_is_mod; - } - - bool matrix_is_on(uint8_t row, uint8_t col) { - uint8_t code = CODE(row, col); - - if (IS_MOD(code)) { - if (local_keyboard_report.mods & ROW_BITS(code)) { - return true; - } - } - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - if (local_keyboard_report.keys[i] == code) { - return true; - } - } - return false; - } - - matrix_row_t matrix_get_row(uint8_t row) { - uint16_t row_bits = 0; - - if (IS_MOD(CODE(row, 0)) && local_keyboard_report.mods) { - row_bits |= local_keyboard_report.mods; - } - - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - if (IS_ANY(local_keyboard_report.keys[i])) { - if (row == ROW(local_keyboard_report.keys[i])) { - row_bits |= ROW_BITS(local_keyboard_report.keys[i]); - } - } - } - return row_bits; - } - - uint8_t matrix_key_count(void) { - uint8_t count = 0; - - count += bitpop(local_keyboard_report.mods); - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - if (IS_ANY(local_keyboard_report.keys[i])) { - count++; - } - } - return count; - } - - void matrix_print(void) { - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < matrix_rows(); row++) { - xprintf("%02d: ", row); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } - } - - void led_set(uint8_t usb_led) - { - kbd1.SetReport(0, 0, 2, 0, 1, &usb_led); - kbd2.SetReport(0, 0, 2, 0, 1, &usb_led); - kbd3.SetReport(0, 0, 2, 0, 1, &usb_led); - kbd4.SetReport(0, 0, 2, 0, 1, &usb_led); - led_set_kb(usb_led); - } - -}; diff --git a/keyboards/converter/usb_usb/hasu/hasu.c b/keyboards/converter/usb_usb/hasu/hasu.c deleted file mode 100644 index 3357735ffda..00000000000 --- a/keyboards/converter/usb_usb/hasu/hasu.c +++ /dev/null @@ -1 +0,0 @@ -#include "hasu.h" diff --git a/keyboards/converter/usb_usb/hasu/hasu.h b/keyboards/converter/usb_usb/hasu/hasu.h deleted file mode 100644 index d5e78558608..00000000000 --- a/keyboards/converter/usb_usb/hasu/hasu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef HASU_H -#define HASU_H - -#include QMK_KEYBOARD_H - -#endif diff --git a/keyboards/converter/usb_usb/hasu/rules.mk b/keyboards/converter/usb_usb/hasu/rules.mk deleted file mode 100644 index 27d8af7683e..00000000000 --- a/keyboards/converter/usb_usb/hasu/rules.mk +++ /dev/null @@ -1 +0,0 @@ -F_CPU = 16000000 diff --git a/keyboards/converter/usb_usb/info.json b/keyboards/converter/usb_usb/info.json deleted file mode 100644 index af3dd0b5e41..00000000000 --- a/keyboards/converter/usb_usb/info.json +++ /dev/null @@ -1,485 +0,0 @@ -{ - "keyboard_name": "converter/usb_usb", - "url": "", - "maintainer": "qmk", - "width": 22.5, - "height": 6.5, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"label":"F13", "x":2, "y":0}, - {"label":"F14", "x":3, "y":0}, - {"label":"F15", "x":4, "y":0}, - {"label":"F16", "x":5, "y":0}, - {"label":"F17", "x":6.5, "y":0}, - {"label":"F18", "x":7.5, "y":0}, - {"label":"F19", "x":8.5, "y":0}, - {"label":"F20", "x":9.5, "y":0}, - {"label":"F21", "x":11, "y":0}, - {"label":"F22", "x":12, "y":0}, - {"label":"F23", "x":13, "y":0}, - {"label":"F24", "x":14, "y":0}, - {"label":"Esc", "x":0, "y":1}, - {"label":"F1", "x":2, "y":1}, - {"label":"F2", "x":3, "y":1}, - {"label":"F3", "x":4, "y":1}, - {"label":"F4", "x":5, "y":1}, - {"label":"F5", "x":6.5, "y":1}, - {"label":"F6", "x":7.5, "y":1}, - {"label":"F7", "x":8.5, "y":1}, - {"label":"F8", "x":9.5, "y":1}, - {"label":"F9", "x":11, "y":1}, - {"label":"F10", "x":12, "y":1}, - {"label":"F11", "x":13, "y":1}, - {"label":"F12", "x":14, "y":1}, - {"label":"Print Screen", "x":15.25, "y":1}, - {"label":"Scroll Lock", "x":16.25, "y":1}, - {"label":"Pause", "x":17.25, "y":1}, - {"label":"Volume Down", "x":18.5, "y":1}, - {"label":"Vol Up", "x":19.5, "y":1}, - {"label":"Mute", "x":20.5, "y":1}, - {"label":"Power", "x":21.5, "y":1}, - {"label":"Help", "x":22.75, "y":1}, - {"label":"`", "x":0, "y":2.5}, - {"label":"1", "x":1, "y":2.5}, - {"label":"2", "x":2, "y":2.5}, - {"label":"3", "x":3, "y":2.5}, - {"label":"4", "x":4, "y":2.5}, - {"label":"5", "x":5, "y":2.5}, - {"label":"6", "x":6, "y":2.5}, - {"label":"7", "x":7, "y":2.5}, - {"label":"8", "x":8, "y":2.5}, - {"label":"9", "x":9, "y":2.5}, - {"label":"0", "x":10, "y":2.5}, - {"label":"-", "x":11, "y":2.5}, - {"label":"=", "x":12, "y":2.5}, - {"label":"Yen", "x":13, "y":2.5}, - {"label":"Back Space", "x":14, "y":2.5}, - {"label":"Insert", "x":15.25, "y":2.5}, - {"label":"Home", "x":16.25, "y":2.5}, - {"label":"Page Up", "x":17.25, "y":2.5}, - {"label":"Num Lock", "x":18.5, "y":2.5}, - {"label":"Num /", "x":19.5, "y":2.5}, - {"label":"Num *", "x":20.5, "y":2.5}, - {"label":"Num -", "x":21.5, "y":2.5}, - {"label":"Stop", "x":22.75, "y":2.5}, - {"label":"Again", "x":23.75, "y":2.5}, - {"label":"Tab", "x":0, "y":3.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":3.5}, - {"label":"W", "x":2.5, "y":3.5}, - {"label":"E", "x":3.5, "y":3.5}, - {"label":"R", "x":4.5, "y":3.5}, - {"label":"T", "x":5.5, "y":3.5}, - {"label":"Y", "x":6.5, "y":3.5}, - {"label":"U", "x":7.5, "y":3.5}, - {"label":"I", "x":8.5, "y":3.5}, - {"label":"O", "x":9.5, "y":3.5}, - {"label":"P", "x":10.5, "y":3.5}, - {"label":"[", "x":11.5, "y":3.5}, - {"label":"]", "x":12.5, "y":3.5}, - {"label":"\\", "x":13.5, "y":3.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":3.5}, - {"label":"End", "x":16.25, "y":3.5}, - {"label":"Page Down", "x":17.25, "y":3.5}, - {"label":"Num 7", "x":18.5, "y":3.5}, - {"label":"Num 8", "x":19.5, "y":3.5}, - {"label":"Num 9", "x":20.5, "y":3.5}, - {"label":"Num +", "x":21.5, "y":3.5}, - {"label":"Menu", "x":22.75, "y":3.5}, - {"label":"Undo", "x":23.75, "y":3.5}, - {"label":"Caps Lock", "x":0, "y":4.5, "w":1.75}, - {"label":"A", "x":1.75, "y":4.5}, - {"label":"S", "x":2.75, "y":4.5}, - {"label":"D", "x":3.75, "y":4.5}, - {"label":"F", "x":4.75, "y":4.5}, - {"label":"G", "x":5.75, "y":4.5}, - {"label":"H", "x":6.75, "y":4.5}, - {"label":"J", "x":7.75, "y":4.5}, - {"label":"K", "x":8.75, "y":4.5}, - {"label":"L", "x":9.75, "y":4.5}, - {"label":";", "x":10.75, "y":4.5}, - {"label":"\"", "x":11.75, "y":4.5}, - {"label":"ISO #", "x":12.75, "y":4.5}, - {"label":"Enter", "x":13.75, "y":4.5, "w":1.25}, - {"label":"Num 4", "x":18.5, "y":4.5}, - {"label":"Num 5", "x":19.5, "y":4.5}, - {"label":"Num 6", "x":20.5, "y":4.5}, - {"label":"Num , ", "x":21.5, "y":4.5}, - {"label":"Select", "x":22.75, "y":4.5}, - {"label":"Copy", "x":23.75, "y":4.5}, - {"label":"Shift", "x":0, "y":5.5, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":5.5}, - {"label":"Z", "x":2.25, "y":5.5}, - {"label":"X", "x":3.25, "y":5.5}, - {"label":"C", "x":4.25, "y":5.5}, - {"label":"V", "x":5.25, "y":5.5}, - {"label":"B", "x":6.25, "y":5.5}, - {"label":"N", "x":7.25, "y":5.5}, - {"label":"M", "x":8.25, "y":5.5}, - {"label":",", "x":9.25, "y":5.5}, - {"label":".", "x":10.25, "y":5.5}, - {"label":"/", "x":11.25, "y":5.5}, - {"label":"JIS \\", "x":12.25, "y":5.5}, - {"label":"Shift", "x":13.25, "y":5.5, "w":1.75}, - {"label":"Up", "x":16.25, "y":5.5}, - {"label":"Num 1", "x":18.5, "y":5.5}, - {"label":"Num 2", "x":19.5, "y":5.5}, - {"label":"Num 3", "x":20.5, "y":5.5}, - {"label":"Num =", "x":21.5, "y":5.5}, - {"label":"Exec", "x":22.75, "y":5.5}, - {"label":"Paste", "x":23.75, "y":5.5}, - {"label":"Ctrl", "x":0, "y":6.5}, - {"label":"GUI", "x":1, "y":6.5}, - {"label":"Alt", "x":2, "y":6.5}, - {"label":"JIS Muhenkan", "x":3, "y":6.5}, - {"label":"Hanja", "x":4, "y":6.5}, - {"label":"Space", "x":5, "y":6.5, "w":3}, - {"label":"Hangul/English", "x":8, "y":6.5}, - {"label":"JIS Henkan", "x":9, "y":6.5}, - {"label":"JIS Katakana/Hiragana", "x":10, "y":6.5}, - {"label":"Alt", "x":11, "y":6.5}, - {"label":"GUI", "x":12, "y":6.5}, - {"label":"App", "x":13, "y":6.5}, - {"label":"Ctrl", "x":14, "y":6.5}, - {"label":"Left", "x":15.25, "y":6.5}, - {"label":"Down", "x":16.25, "y":6.5}, - {"label":"Right", "x":17.25, "y":6.5}, - {"label":"Num 0", "x":18.5, "y":6.5, "w":2}, - {"label":"Num .", "x":20.5, "y":6.5}, - {"label":"Num Enter", "x":21.5, "y":6.5}, - {"label":"Find", "x":22.75, "y":6.5}, - {"label":"Cut", "x":23.75, "y":6.5} - ] - }, - "LAYOUT_ansi": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"PrtSc", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"`", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Num Lock", "x":18.5, "y":1.5}, - {"label":"Num /", "x":19.5, "y":1.5}, - {"label":"Num *", "x":20.5, "y":1.5}, - {"label":"Num -", "x":21.5, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"[", "x":11.5, "y":2.5}, - {"label":"]", "x":12.5, "y":2.5}, - {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Num 7", "x":18.5, "y":2.5}, - {"label":"Num 8", "x":19.5, "y":2.5}, - {"label":"Num 9", "x":20.5, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":":", "x":10.75, "y":3.5}, - {"label":"\"", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"Num 4", "x":18.5, "y":3.5}, - {"label":"Num 5", "x":19.5, "y":3.5}, - {"label":"Num 6", "x":20.5, "y":3.5}, - {"label":"Num +", "x":21.5, "y":2.5, "h":2}, - {"label":"Shift", "x":0, "y":4.5, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Num 1", "x":18.5, "y":4.5}, - {"label":"Num 2", "x":19.5, "y":4.5}, - {"label":"Num 3", "x":20.5, "y":4.5}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, - {"label":"Alt", "x":10, "y":5.5, "w":1.25}, - {"label":"GUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5}, - {"label":"Num 0", "x":18.5, "y":5.5, "w":2}, - {"label":"Num .", "x":20.5, "y":5.5}, - {"label":"Num Enter", "x":21.5, "y":4.5, "h":2} - ] - }, - "LAYOUT_iso": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"`", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Num Lock", "x":18.5, "y":1.5}, - {"label":"Num /", "x":19.5, "y":1.5}, - {"label":"Num *", "x":20.5, "y":1.5}, - {"label":"Num -", "x":21.5, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"[", "x":11.5, "y":2.5}, - {"label":"]", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Num 7", "x":18.5, "y":2.5}, - {"label":"Num 8", "x":19.5, "y":2.5}, - {"label":"Num 9", "x":20.5, "y":2.5}, - {"label":"Num +", "x":21.5, "y":2.5, "h":2}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":";", "x":10.75, "y":3.5}, - {"label":"'", "x":11.75, "y":3.5}, - {"label":"ISO #", "x":12.75, "y":3.5}, - {"label":"Num 4", "x":18.5, "y":3.5}, - {"label":"Num 5", "x":19.5, "y":3.5}, - {"label":"Num 6", "x":20.5, "y":3.5}, - {"label":"Shift", "x":0, "y":4.5, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":4.5}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Num 1", "x":18.5, "y":4.5}, - {"label":"Num 2", "x":19.5, "y":4.5}, - {"label":"Num 3", "x":20.5, "y":4.5}, - {"label":"Num Enter", "x":21.5, "y":4.5, "h":2}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, - {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, - {"label":"GUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5}, - {"label":"Num 0", "x":18.5, "y":5.5, "w":2}, - {"label":"Num .", "x":20.5, "y":5.5} - ] - }, - "LAYOUT_jis": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Print Screen", "x":15.25, "y":0}, - {"label":"Scroll Lock", "x":16.25, "y":0}, - {"label":"Pause", "x":17.25, "y":0}, - {"label":"JIS Hankaku / Zenkaku", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"ˆ", "x":12, "y":1.5}, - {"label":"JIS Yen", "x":13, "y":1.5}, - {"label":"Back Space", "x":14, "y":1.5}, - {"label":"Insert", "x":15.25, "y":1.5}, - {"label":"Home", "x":16.25, "y":1.5}, - {"label":"Page Up", "x":17.25, "y":1.5}, - {"label":"Num Lock", "x":18.5, "y":1.5}, - {"label":"Num /", "x":19.5, "y":1.5}, - {"label":"Num *", "x":20.5, "y":1.5}, - {"label":"Num -", "x":21.5, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"@", "x":11.5, "y":2.5}, - {"label":"[", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, - {"label":"Delete", "x":15.25, "y":2.5}, - {"label":"End", "x":16.25, "y":2.5}, - {"label":"Page Down", "x":17.25, "y":2.5}, - {"label":"Num 7", "x":18.5, "y":2.5}, - {"label":"Num 8", "x":19.5, "y":2.5}, - {"label":"Num 9", "x":20.5, "y":2.5}, - {"label":"Num +", "x":21.5, "y":2.5, "h":2}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":";", "x":10.75, "y":3.5}, - {"label":":", "x":11.75, "y":3.5}, - {"label":"]", "x":12.75, "y":3.5}, - {"label":"Num 4", "x":18.5, "y":3.5}, - {"label":"Num 5", "x":19.5, "y":3.5}, - {"label":"Num 6", "x":20.5, "y":3.5}, - {"label":"Shift", "x":0, "y":4.5, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, - {"label":"JIS \\", "x":12.25, "y":4.5}, - {"label":"Shift", "x":13.25, "y":4.5, "w":1.75}, - {"label":"Up", "x":16.25, "y":4.5}, - {"label":"Num 1", "x":18.5, "y":4.5}, - {"label":"Num 2", "x":19.5, "y":4.5}, - {"label":"Num 3", "x":20.5, "y":4.5}, - {"label":"Num Enter", "x":21.5, "y":4.5, "h":2}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5.5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"label":"JIS Muhenkan", "x":3.75, "y":5.5, "w":1.25}, - {"label":"Space", "x":5, "y":5.5, "w":2.5}, - {"label":"JIS Henkan", "x":7.5, "y":5.5, "w":1.25}, - {"label":"JIS Hiragana / Katakana", "x":8.75, "y":5.5, "w":1.25}, - {"label":"Alt", "x":10, "y":5.5, "w":1.25}, - {"label":"GUI", "x":11.25, "y":5.5, "w":1.25}, - {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":15.25, "y":5.5}, - {"label":"Down", "x":16.25, "y":5.5}, - {"label":"Right", "x":17.25, "y":5.5}, - {"label":"Num 0", "x":18.5, "y":5.5, "w":2}, - {"label":"Num .", "x":20.5, "y":5.5} - ] - } - } -} diff --git a/keyboards/converter/usb_usb/keymaps/ble/config.h b/keyboards/converter/usb_usb/keymaps/ble/config.h deleted file mode 100644 index 7fa3bf328ec..00000000000 --- a/keyboards/converter/usb_usb/keymaps/ble/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#endif diff --git a/keyboards/converter/usb_usb/keymaps/ble/keymap.c b/keyboards/converter/usb_usb/keymaps/ble/keymap.c deleted file mode 100644 index 190b3319fe9..00000000000 --- a/keyboards/converter/usb_usb/keymaps/ble/keymap.c +++ /dev/null @@ -1,64 +0,0 @@ -/* -Copyright 2017 Balz Guenat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - /* 0: plain Qwerty without layer switching - * ,---------------. ,---------------. ,---------------. - * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| - * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | - * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| - * |-----------------------------------------------------------| |-----------| |---------------| |-------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| - * |-----------------------------------------------------------| `-----------' |---------------| |-------| - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| - * |-----------------------------------------------------------| ,---. |---------------| |-------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| - * |-----------------------------------------------------------| ,-----------. |---------------| |-------| - * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| - * `-----------------------------------------------------------' `-----------' `---------------' `-------' - */ - [0] = LAYOUT_all( - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, KC_HELP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_STOP, KC_AGIN, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_MENU, KC_UNDO, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_SLCT, KC_COPY, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_EXEC, KC_PSTE, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ, KC_SPC, KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_FIND, KC_CUT - ), -}; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h b/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h deleted file mode 100644 index 7fa3bf328ec..00000000000 --- a/keyboards/converter/usb_usb/keymaps/coloneljesus/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#endif diff --git a/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c b/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c deleted file mode 100644 index 6dfd1ad79e6..00000000000 --- a/keyboards/converter/usb_usb/keymaps/coloneljesus/keymap.c +++ /dev/null @@ -1,295 +0,0 @@ -/* -Copyright 2017 Balz Guenat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - /* 0: plain Qwerty without layer switching - * ,---------------. ,---------------. ,---------------. - * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| - * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | - * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| - * |-----------------------------------------------------------| |-----------| |---------------| |-------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| - * |-----------------------------------------------------------| `-----------' |---------------| |-------| - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| - * |-----------------------------------------------------------| ,---. |---------------| |-------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| - * |-----------------------------------------------------------| ,-----------. |---------------| |-------| - * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| - * `-----------------------------------------------------------' `-----------' `---------------' `-------' - */ - // LAYOUT_all( - // F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, - // ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, - // GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, - // TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, - // CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, - // LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, - // LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT - // ), - LAYOUT_all( - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, KC_HELP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_STOP, KC_AGIN, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_MENU, KC_UNDO, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_SLCT, KC_COPY, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_EXEC, KC_PSTE, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ, KC_SPC, KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_FIND, KC_CUT - ), - LAYOUT_all( - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______, - KC_GRV, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, - KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, - ______, KC_MUTE, KC_VOLD, KC_MPLY, ______, ______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, ______, ______, ______, ______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, ______,______,______, ______, ______,______, ______,______ - ), -}; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} - -/* - * Keymap samples - */ -#if 0 - /* ANSI layout - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| - * |-----------------------------------------------------------| `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| Return| | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|Ent| - * `-----------------------------------------------------------' `-----------' `---------------' - */ - LAYOUT_ansi( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - - /* ISO layout - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Retn| |Del|End|PgD| | 7| 8| 9| +| - * |------------------------------------------------------` | `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #| | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shft|\ | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3|Ent| - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt| Space |HNK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ - LAYOUT_iso( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, DEL, END, PGDN, P7, P8, P9, PPLS, - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT - ), - - /* JIS layout - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Retn| |Del|End|PgD| | 7| 8| 9| +| - * |------------------------------------------------------` | `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| ]| | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shft | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|Ent| - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt|MHEN| Space |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ - LAYOUT_jis( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JPY, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, DEL, END, PGDN, P7, P8, P9, PPLS, - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, P4, P5, P6, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PENT, - LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT - ), - - /* Colemak http://colemak.com - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| - * |-----------------------------------------------------------| - * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `----------------------------------------------------------' - */ - LAYOUT_all( - F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, - TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, - BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, - LSFT,NUBS,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, - LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT - ), - - /* Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| - * |-----------------------------------------------------------| - * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| - * |-----------------------------------------------------------| - * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | - * |-----------------------------------------------------------| - * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - LAYOUT_all( - F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, - TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, - CAPS,A, O, E, U, I, D, H, T, N, S, MINS, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, - LSFT,NUBS,SCLN,Q, J, K, X, B, M, W, V, Z, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, - LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT - ), - - /* Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ - * ,-----------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| - * |-----------------------------------------------------------| - * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - LAYOUT_all( - F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, - TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, - CAPS,A, S, H, T, G, Y, N, E, O, I, QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, - LSFT,NUBS,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, - LCTL,LGUI,LALT,MHEN,HANJ, SPC, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT - ), - - -/* - * SpaceFN layout - * http://geekhack.org/index.php?topic=51069.0 - */ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: plain Qwerty - * ,---------------. ,---------------. ,---------------. - * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| - * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | - * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| - * |-----------------------------------------------------------| |-----------| |---------------| |-------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| - * |-----------------------------------------------------------| `-----------' |---------------| |-------| - * |LCtrl | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| - * |-----------------------------------------------------------| ,---. |---------------| |-------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| - * |-----------------------------------------------------------| ,-----------. |---------------| |-------| - * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| - * `-----------------------------------------------------------' `-----------' `---------------' `-------' - */ - [0] = LAYOUT_all( - F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,PWR, HELP, - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, STOP,AGIN, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, MENU,UNDO, - LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, PCMM, SLCT,COPY, - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL, EXEC,PSTE, - LCTL,LGUI,LALT,MHEN,HANJ, FN0, HAEN,HENK,KANA,RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT, FIND,CUT - ), - - /* 1: SpaceFN - * ,-----------------------------------------------------------. - * |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | - * |-----------------------------------------------------------| - * |Caps | | |Esc| | | |Hom|Up |End|Psc|Slk|Pau|Ins | - * |-----------------------------------------------------------| - * | | | | | | |PgU|Lef|Dow|Rig| | | | - * |-----------------------------------------------------------| - * | | | | | |Spc|PgD|` |~ | |Men| | - * |-----------------------------------------------------------| - * | | | | | | | | | - * `-----------------------------------------------------------' - */ - [1] = LAYOUT_all( - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, - CAPS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS, INS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS, TRNS,TRNS, TRNS,TRNS - ), -}; - -const action_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), - [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde -}; - -#endif diff --git a/keyboards/converter/usb_usb/keymaps/default/config.h b/keyboards/converter/usb_usb/keymaps/default/config.h deleted file mode 100644 index 271f48d0011..00000000000 --- a/keyboards/converter/usb_usb/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/converter/usb_usb/keymaps/default/keymap.c b/keyboards/converter/usb_usb/keymaps/default/keymap.c deleted file mode 100644 index 170ed31ef87..00000000000 --- a/keyboards/converter/usb_usb/keymaps/default/keymap.c +++ /dev/null @@ -1,73 +0,0 @@ -/* -Copyright 2017 Balz Guenat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - /* 0: plain Qwerty without layer switching - * ,---------------. ,---------------. ,---------------. - * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| - * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | - * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| - * |-----------------------------------------------------------| |-----------| |---------------| |-------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| - * |-----------------------------------------------------------| `-----------' |---------------| |-------| - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| - * |-----------------------------------------------------------| ,---. |---------------| |-------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| - * |-----------------------------------------------------------| ,-----------. |---------------| |-------| - * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| - * `-----------------------------------------------------------' `-----------' `---------------' `-------' - */ - [0] = LAYOUT_all( - KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, KC_HELP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_STOP, KC_AGIN, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_MENU, KC_UNDO, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_SLCT, KC_COPY, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_EXEC, KC_PSTE, - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ, KC_SPC, KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_FIND, KC_CUT - ), - [1] = LAYOUT_all( - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______,______, ______,______, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,______, ______, ______,______, ______,______ - ), -}; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/converter/usb_usb/main.c b/keyboards/converter/usb_usb/main.c deleted file mode 100644 index 76e88922cb4..00000000000 --- a/keyboards/converter/usb_usb/main.c +++ /dev/null @@ -1,102 +0,0 @@ -#include -#include -#include -#include - -// LUFA -#include "lufa.h" - -#include "sendchar.h" -#include "debug.h" -#include "keyboard.h" -#include "led.h" - - -/* LED ping configuration */ -#define TMK_LED -//#define LEONARDO_LED -#if defined(TMK_LED) -// For TMK converter and Teensy -#define LED_TX_INIT (DDRD |= (1<<6)) -#define LED_TX_ON (PORTD |= (1<<6)) -#define LED_TX_OFF (PORTD &= ~(1<<6)) -#define LED_TX_TOGGLE (PORTD ^= (1<<6)) -#elif defined(LEONARDO_LED) -// For Leonardo(TX LED) -#define LED_TX_INIT (DDRD |= (1<<5)) -#define LED_TX_ON (PORTD &= ~(1<<5)) -#define LED_TX_OFF (PORTD |= (1<<5)) -#define LED_TX_TOGGLE (PORTD ^= (1<<5)) -#else -#define LED_TX_INIT -#define LED_TX_ON -#define LED_TX_OFF -#define LED_TX_TOGGLE -#endif - - -static void LUFA_setup(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ -#if (F_CPU == 8000000) - clock_prescale_set(clock_div_2); // 16MHz crystal divided by 2 -#else - clock_prescale_set(clock_div_1); -#endif - - // Leonardo needs. Without this USB device is not recognized. - USB_Disable(); - - USB_Init(); - - // for Console_Task - USB_Device_EnableSOFEvents(); - print_set_sendchar(sendchar); -} - - - -int main(void) -{ - // LED for debug - LED_TX_INIT; - LED_TX_ON; - - debug_enable = true; - debug_keyboard = true; - - host_set_driver(&lufa_driver); - keyboard_init(); - - LUFA_setup(); - - /* NOTE: Don't insert time consuming job here. - * It'll cause unclear initialization failure when DFU reset(worm start). - */ - sei(); - -/* Some keyboards bootup quickly and cannot be initialized with this startup wait. - // wait for startup of sendchar routine - while (USB_DeviceState != DEVICE_STATE_Configured) ; - if (debug_enable) { - _delay_ms(1000); - } -*/ - - debug("init: done\n"); - - for (;;) { - keyboard_task(); - -#if !defined(INTERRUPT_CONTROL_ENDPOINT) - // LUFA Task for control request - USB_USBTask(); -#endif - } - - return 0; -} diff --git a/keyboards/converter/usb_usb/matrix.c b/keyboards/converter/usb_usb/matrix.c deleted file mode 100644 index b077febd74d..00000000000 --- a/keyboards/converter/usb_usb/matrix.c +++ /dev/null @@ -1 +0,0 @@ -// Intentionally left empty. This file must exist for this board to build. diff --git a/keyboards/converter/usb_usb/pro_micro/pro_micro.c b/keyboards/converter/usb_usb/pro_micro/pro_micro.c deleted file mode 100644 index f10142f81a3..00000000000 --- a/keyboards/converter/usb_usb/pro_micro/pro_micro.c +++ /dev/null @@ -1 +0,0 @@ -#include "pro_micro.h" diff --git a/keyboards/converter/usb_usb/pro_micro/pro_micro.h b/keyboards/converter/usb_usb/pro_micro/pro_micro.h deleted file mode 100644 index 566df9f20fd..00000000000 --- a/keyboards/converter/usb_usb/pro_micro/pro_micro.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef PRO_MICRO_H -#define PRO_MICRO_H - -#include QMK_KEYBOARD_H - -#endif diff --git a/keyboards/converter/usb_usb/pro_micro/rules.mk b/keyboards/converter/usb_usb/pro_micro/rules.mk deleted file mode 100644 index 7c04fa34fd2..00000000000 --- a/keyboards/converter/usb_usb/pro_micro/rules.mk +++ /dev/null @@ -1 +0,0 @@ -F_CPU = 8000000 diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk deleted file mode 100644 index dfe89ee7d94..00000000000 --- a/keyboards/converter/usb_usb/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. - -# Since there are different hardware variations of these adapters and since these -# have different CPU clocks, the clock speed should be set in the rules.mk file of the -# respective hardware variantion (i.e. subproject). For example, in /pro_micro/rules.mk -# this is set to 8000000. -# The value here is only a fallback and is ignored if it is defined in the subproject. -F_CPU ?= 16000000 - -DEFAULT_FOLDER = converter/usb_usb/hasu - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -#CONSOLE_ENABLE = yes # Console for debug(+400) -#COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -#BACKLIGHT_ENABLE = yes -USB_HID_ENABLE = yes -CUSTOM_MATRIX = yes - -SRC = custom_matrix.cpp diff --git a/keyboards/converter/usb_usb/usb_usb.c b/keyboards/converter/usb_usb/usb_usb.c deleted file mode 100644 index e8f224ad46b..00000000000 --- a/keyboards/converter/usb_usb/usb_usb.c +++ /dev/null @@ -1 +0,0 @@ -#include "usb_usb.h" diff --git a/keyboards/converter/usb_usb/usb_usb.h b/keyboards/converter/usb_usb/usb_usb.h deleted file mode 100644 index e0c7c9c0d45..00000000000 --- a/keyboards/converter/usb_usb/usb_usb.h +++ /dev/null @@ -1,203 +0,0 @@ -/* -Copyright 2017 Balz Guenat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef USB_USB_H -#define USB_USB_H - -#include "quantum.h" - -#define ______ KC_TRNS - -/* ,---------------. ,---------------. ,---------------. - * |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24| - * ,---. |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help | - * `---' `---------------' `---------------' `---------------' `-----------' `---------------' `-------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| |Stp|Agn| - * |-----------------------------------------------------------| |-----------| |---------------| |-------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| |Mnu|Und| - * |-----------------------------------------------------------| `-----------' |---------------| |-------| - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #|Retn| | 4| 5| 6|KP,| |Sel|Cpy| - * |-----------------------------------------------------------| ,---. |---------------| |-------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|KP=| |Exe|Pst| - * |-----------------------------------------------------------| ,-----------. |---------------| |-------| - * |Ctl|Gui|Alt|MHEN|HNJ| Space |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent| |Fnd|Cut| - * `-----------------------------------------------------------' `-----------' `---------------' `-------' - * - * - * App: Windows Menu key - * Gui: Windows key, Mac ⌘ key or Meta key - * - * Pwr: Power for Unix and Mac - * VDn,Vup,Mut: Volume control for Unix and Mac - * Stp,Agn..: for Unix - * - * KP,: Brazilian Keypad Comma - * KP=: Keypad = for Mac - * <,#: ISO keys(UK legend) - * JPY: Japanese Yen(￥) - * RO: Japanese ろ or Brazilian / - * MHEN: Japanese 無変換 Non Conversion - * HENK: Japanese 変換 Conversion - * KANA: Japanese かな Hiragana/Katakana - * https://en.wikipedia.org/wiki/Keyboard_layout#Japanese - * H/E: Korean 한/영 Hangul/English - * HNJ: Korean 한자 Hanja - * https://en.wikipedia.org/wiki/Keyboard_layout#Hangul_.28for_Korean.29 - * - * TODO: use same keycode to pass through instead of KC_NO? - */ -#define LAYOUT_all( \ - K68,K69,K6A,K6B,K6C,K6D,K6E,K6F,K70,K71,K72,K73, \ - K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, K81,K80,K7F,K66, K75, \ - K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K89,K2A, K49,K4A,K4B, K53,K54,K55,K56, K78,K79, \ - K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K31, K4C,K4D,K4E, K5F,K60,K61,K57, K76,K7A, \ - K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K32,K28, K5C,K5D,K5E,K85, K77,K7C, \ - KE1,K64,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, K87,KE5, K52, K59,K5A,K5B,K67, K74,K7D, \ - KE0,KE3,KE2,K8B,K91, K2C, K90,K8A,K88,KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58, K7E,K7B \ -) { \ - { KC_NO, KC_NO, KC_NO, KC_NO, K04, K05, K06, K07, /* 00-07 */ \ - K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, /* 08-0F */ \ - { K10, K11, K12, K13, K14, K15, K16, K17, /* 10-17 */ \ - K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, /* 18-1F */ \ - { K20, K21, K22, K23, K24, K25, K26, K27, /* 20-27 */ \ - K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, /* 28-2F */ \ - { K30, K31, K32, K33, K34, K35, K36, K37, /* 30-37 */ \ - K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, /* 38-3F */ \ - { K40, K41, K42, K43, K44, K45, K46, K47, /* 40-47 */ \ - K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, /* 48-4F */ \ - { K50, K51, K52, K53, K54, K55, K56, K57, /* 50-57 */ \ - K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, /* 58-5F */ \ - { K60, K61, K62, K63, K64, K65, K66, K67, /* 60-67 */ \ - K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }, /* 68-6F */ \ - { K70, K71, K72, K73, K74, K75, K76, K77, /* 70-77 */ \ - K78, K79, K7A, K7B, K7C, K7D, K7E, K7F }, /* 78-7F */ \ - { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87, /* 80-87 */ \ - K88, K89, K8A, K8B, KC_NO, KC_NO, KC_NO, KC_NO }, /* 88-8F */ \ - { K90, K91, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* 90-97 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* 98-9F */ \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* A0-A7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* A8-AF */ \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* B0-B7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* B8-BF */ \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* C0-C7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* C8-CF */ \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* D0-D7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* D8-DF */ \ - { KE0, KE1, KE2, KE3, KE4, KE5, KE6, KE7, /* E0-E7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* E8-EF */ \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, /* F0-F7 */ \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, /* F8-FF */ \ -} - -/* ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| - * |-----------------------------------------------------------| `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| Return| | 4| 5| 6| +| - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|Ent| - * `-----------------------------------------------------------' `-----------' `---------------' - */ -#define LAYOUT_ansi( \ - K29,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ - K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ - K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30,K31, K4C,K4D,K4E, K5F,K60,K61, \ - K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K28, K5C,K5D,K5E,K57, \ - KE1,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, KE5, K52, K59,K5A,K5B, \ - KE0,KE3,KE2, K2C, KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58 \ -) LAYOUT_all( \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K29, K3A, K3B, K3C, K3D, K3E, K3F, K40, K41, K42, K43, K44, K45, K46, K47, K48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K35, K1E, K1F, K20, K21, K22, K23, K24, K25, K26, K27, K2D, K2E, KC_NO, K2A, K49, K4A, K4B, K53, K54, K55, K56, KC_NO, KC_NO, \ - K2B, K14, K1A, K08, K15, K17, K1C, K18, K0C, K12, K13, K2F, K30, K31, K4C, K4D, K4E, K5F, K60, K61, K57, KC_NO, KC_NO, \ - K39, K04, K16, K07, K09, K0A, K0B, K0D, K0E, K0F, K33, K34, KC_NO, K28, K5C, K5D, K5E, KC_NO, KC_NO, KC_NO, \ - KE1, KC_NO, K1D, K1B, K06, K19, K05, K11, K10, K36, K37, K38, KC_NO, KE5, K52, K59, K5A, K5B, KC_NO, KC_NO, KC_NO, \ - KE0, KE3, KE2, KC_NO, KC_NO, K2C, KC_NO, KC_NO, KC_NO, KE6, KE7, K65, KE4, K50, K51, K4F, K62, K63, K58, KC_NO, KC_NO \ -) - -/* ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Retn| |Del|End|PgD| | 7| 8| 9| +| - * |------------------------------------------------------` | `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| #| | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shft| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3|Ent| - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ -#define LAYOUT_iso( \ - K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ - K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ - K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30,K28, K4C,K4D,K4E, K5F,K60,K61,K57, \ - K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34,K32, K5C,K5D,K5E, \ - KE1,K64,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, KE5, K52, K59,K5A,K5B,K58, \ - KE0,KE3,KE2, K2C, KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63 \ -) LAYOUT_all( \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K29, K3A, K3B, K3C, K3D, K3E, K3F, K40, K41, K42, K43, K44, K45, K46, K47, K48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K35, K1E, K1F, K20, K21, K22, K23, K24, K25, K26, K27, K2D, K2E, KC_NO, K2A, K49, K4A, K4B, K53, K54, K55, K56, KC_NO, KC_NO, \ - K2B, K14, K1A, K08, K15, K17, K1C, K18, K0C, K12, K13, K2F, K30, K32, K4C, K4D, K4E, K5F, K60, K61, K57, KC_NO, KC_NO, \ - K39, K04, K16, K07, K09, K0A, K0B, K0D, K0E, K0F, K33, K34, K32, K28, K5C, K5D, K5E, KC_NO, KC_NO, KC_NO, \ - KE1, K64, K1D, K1B, K06, K19, K05, K11, K10, K36, K37, K38, KC_NO, KE5, K52, K59, K5A, K5B, KC_NO, KC_NO, KC_NO, \ - KE0, KE3, KE2, KC_NO, KC_NO, K2C, KC_NO, KC_NO, KC_NO, KE6, KE7, K65, KE4, K50, K51, K4F, K62, K63, K58, KC_NO, KC_NO \ -) - -/* ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Retn| |Del|End|PgD| | 7| 8| 9| +| - * |------------------------------------------------------` | `-----------' |-----------| | - * |CapsL | A| S| D| F| G| H| J| K| L| ;| :| ]| | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shft | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3|Ent| - * |-----------------------------------------------------------| ,-----------. |-----------| | - * |Ctl|Gui|Alt|MHEN| Space |HENK|KNA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ -#define LAYOUT_jis( \ - K29, K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ - K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K89,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ - K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30, K28, K4C,K4D,K4E, K5F,K60,K61,K57, \ - K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34,K32, K5C,K5D,K5E, \ - KE1,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, K87,KE5, K52, K59,K5A,K5B,K58, \ - KE0,KE3,KE2,K8B, K2C, K8A,K88,KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63 \ -) LAYOUT_all( \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K29, K3A, K3B, K3C, K3D, K3E, K3F, K40, K41, K42, K43, K44, K45, K46, K47, K48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - K35, K1E, K1F, K20, K21, K22, K23, K24, K25, K26, K27, K2D, K2E, K89, K2A, K49, K4A, K4B, K53, K54, K55, K56, KC_NO, KC_NO, \ - K2B, K14, K1A, K08, K15, K17, K1C, K18, K0C, K12, K13, K2F, K30, K32, K4C, K4D, K4E, K5F, K60, K61, K57, KC_NO, KC_NO, \ - K39, K04, K16, K07, K09, K0A, K0B, K0D, K0E, K0F, K33, K34, K32, K28, K5C, K5D, K5E, KC_NO, KC_NO, KC_NO, \ - KE1, KC_NO, K1D, K1B, K06, K19, K05, K11, K10, K36, K37, K38, K87, KE5, K52, K59, K5A, K5B, KC_NO, KC_NO, KC_NO, \ - KE0, KE3, KE2, K8B, KC_NO, K2C, KC_NO, K8A, K88, KE6, KE7, K65, KE4, K50, K51, K4F, K62, K63, K58, KC_NO, KC_NO \ -) -#endif diff --git a/keyboards/converter/xt_usb/README.md b/keyboards/converter/xt_usb/README.md deleted file mode 100644 index 40b265a189e..00000000000 --- a/keyboards/converter/xt_usb/README.md +++ /dev/null @@ -1,17 +0,0 @@ -XT to USB keyboard converter -============================== -This is a port of TMK's converter/xt_usb to QMK. - -This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.) - - -Connect Wires -------------- -1. Connect **Vcc** and **GND**. -2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`. -3. You need pull-up resistor. **1K-10K Ohm** will be OK. - - -XT keyboard protocol resource ------------------------------- -https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol diff --git a/keyboards/converter/xt_usb/config.h b/keyboards/converter/xt_usb/config.h deleted file mode 100644 index ecebc123fa1..00000000000 --- a/keyboards/converter/xt_usb/config.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6512 -#define DEVICE_VER 0x0001 -#define MANUFACTURER QMK -#define PRODUCT XT keyboard converter -#define DESCRIPTION convert XT keyboard to USB - - -/* matrix size */ -#define MATRIX_ROWS 16 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \ - get_mods() == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \ -) - - -//#define NO_SUSPEND_POWER_DOWN - -/* - * XT Pin interrupt - */ -#define XT_CLOCK_PORT PORTD -#define XT_CLOCK_PIN PIND -#define XT_CLOCK_DDR DDRD -#define XT_CLOCK_BIT 1 -#define XT_DATA_PORT PORTD -#define XT_DATA_PIN PIND -#define XT_DATA_DDR DDRD -#define XT_DATA_BIT 0 -#define XT_RST_PORT PORTB -#define XT_RST_PIN PINB -#define XT_RST_DDR DDRB -#define XT_RST_BIT 7 - -/* hard reset: low pulse for 500ms and after that HiZ for safety */ -#define XT_RESET() do { \ - XT_RST_PORT &= ~(1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "led.h" - -void led_set(uint8_t usb_led) { - //XT Keyboards do not have LEDs, nothing to do. -} diff --git a/keyboards/converter/xt_usb/matrix.c b/keyboards/converter/xt_usb/matrix.c deleted file mode 100644 index e2d7117b13a..00000000000 --- a/keyboards/converter/xt_usb/matrix.c +++ /dev/null @@ -1,309 +0,0 @@ -/* -Copyright 2011 Jun Wako -Copyright 2016 Ethan Apodaca - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include "action.h" -#include "print.h" -#include "util.h" -#include "debug.h" -#include "xt.h" -#include "matrix.h" - - -static void matrix_make(uint8_t code); -static void matrix_break(uint8_t code); - -static uint8_t matrix[MATRIX_ROWS]; -#define ROW(code) (code>>3) -#define COL(code) (code&0x07) - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void matrix_init(void) -{ - debug_enable = true; - xt_host_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - matrix_init_quantum(); -} - -// convert E0-escaped codes into unused area -static uint8_t move_e0code(uint8_t code) { - switch(code) { - // Original IBM XT keyboard has these keys - case 0x37: return 0x54; // Print Screen - case 0x46: return 0x55; // Ctrl + Pause - case 0x1C: return 0x6F; // Keypad Enter - case 0x35: return 0x7F; // Keypad / - - // Any XT keyobard with these keys? - // http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf - // https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc - case 0x5B: return 0x5A; // Left GUI - case 0x5C: return 0x5B; // Right GUI - case 0x5D: return 0x5C; // Application - case 0x5E: return 0x5D; // Power(not used) - case 0x5F: return 0x5E; // Sleep(not used) - case 0x63: return 0x5F; // Wake (not used) - case 0x48: return 0x60; // Up - case 0x4B: return 0x61; // Left - case 0x50: return 0x62; // Down - case 0x4D: return 0x63; // Right - case 0x52: return 0x71; // Insert - case 0x53: return 0x72; // Delete - case 0x47: return 0x74; // Home - case 0x4F: return 0x75; // End - case 0x49: return 0x77; // Home - case 0x51: return 0x78; // End - case 0x1D: return 0x7A; // Right Ctrl - case 0x38: return 0x7C; // Right Alt - } - return 0x00; -} - -uint8_t matrix_scan(void) -{ - static enum { - INIT, - E0, - // Pause: E1 1D 45, E1 9D C5 - E1, - E1_1D, - E1_9D, - } state = INIT; - - uint8_t code = xt_host_recv(); - if (!code) return 0; - xprintf("%02X ", code); - switch (state) { - case INIT: - switch (code) { - case 0xE0: - state = E0; - break; - case 0xE1: - state = E1; - break; - default: - if (code < 0x80) - matrix_make(code); - else - matrix_break(code & 0x7F); - break; - } - break; - case E0: - switch (code) { - case 0x2A: - case 0xAA: - case 0x36: - case 0xB6: - //ignore fake shift - state = INIT; - break; - default: - if (code < 0x80) - matrix_make(move_e0code(code)); - else - matrix_break(move_e0code(code & 0x7F)); - state = INIT; - break; - } - break; - case E1: - switch (code) { - case 0x1D: - state = E1_1D; - break; - case 0x9D: - state = E1_9D; - break; - default: - state = INIT; - break; - } - break; - case E1_1D: - switch (code) { - case 0x45: - matrix_make(0x55); - break; - default: - state = INIT; - break; - } - break; - case E1_9D: - switch (code) { - case 0x45: - matrix_break(0x55); - break; - default: - state = INIT; - break; - } - break; - default: - state = INIT; - } - matrix_scan_quantum(); - return 1; -} - -inline -uint8_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -inline -static void matrix_make(uint8_t code) -{ - if (!matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] |= 1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#include "quantum.h" - -/* IBM XT keyboard layout - * ,-------. ,--------------------------------------------------------------------------. - * | F1| F2| |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS |NumLck |ScrLck | - * |-------| |--------------------------------------------------------------------------| - * | F3| F4| | Tab | Q| W| E| R| T| Y| U| I| O| P| [| ] | | 7| 8| 9| -| - * |-------| |------------------------------------------------------|Ent|---------------| - * | F5| F6| | Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | 4| 5| 6| | - * |-------| |----------------------------------------------------------------------| | - * | F7| F8| |Shif| \| Z| X| C| V| B| N| M| ,| .| /|Shift|PrS| 1| 2| 3| +| - * |-------| |----------------------------------------------------------------------| | - * | F9|F10| | Alt | Space |CapsLck| 0 | . | | - * `-------' `--------------------------------------------------------------------------' - * Scan code set 1 - * ,-------. ,--------------------------------------------------------------------------. - * | 3B| 3C| | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | 45 | 46 | - * |-------| |--------------------------------------------------------------------------| - * | 3D| 3E| | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B | | 47| 48| 49| 4A| - * |-------| |------------------------------------------------------| 1C|---------------| - * | 3F| 40| | 1D | 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| | 4B| 4C| 4D| | - * |-------| |----------------------------------------------------------------------| | - * | 41| 42| | 2A | 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35| 36 |*37| 4F| 50| 51| 4E| - * |-------| |----------------------------------------------------------------------| | - * | 43| 44| | 38 | 39 | 3A | 52 | 53 | | - * `-------' `--------------------------------------------------------------------------' - */ -#define LAYOUT_xt( \ - K3B,K3C, K01,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K0E, K45, K46, \ - K3D,K3E, K0F,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B, K47,K48,K49,K4A, \ - K3F,K40, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K1C,K4B,K4C,K4D, \ - K41,K42, K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,K35,K36,K54,K4F,K50,K51,K4E, \ - K43,K44, K38, K39, K3A, K52, K53 \ -) { \ - { KC_NO, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, K34, K35, K36, KC_NO }, \ - { K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ - { K40, K41, K42, K43, K44, K45, K46, K47 }, \ - { K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \ - { K50, K51, K52, K53, K54, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ -} - -/* Extended keyboard layout - * ,-----------------------------------------------. - * |F13|F14|F15|F16|F17|F18|F19|F20|F21|F22|F23|F24| - * ,---. |-----------------------------------------------| ,-----------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut| - * `---' `-----------------------------------------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +| - * |-----------------------------------------------------------| `-----------' |---------------| - * |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #|Entr| | 4| 5| 6|KP,| - * |-----------------------------------------------------------| ,---. |---------------| - * |Shft| <| Z| X| C| V| B| N| M| ,| .| /| RO|Shift | |Up | | 1| 2| 3|Ent| - * |-----------------------------------------------------------| ,-----------. |---------------| - * |Ctl|Gui|Alt|MHEN| Space |HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0| .|KP=| - * `-----------------------------------------------------------' `-----------' `---------------' - * ,-----------------------------------------------. - * | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E| 76| - * ,---. |-----------------------------------------------| ,-----------. ,-----------. - * | 01| | 3B| 3C| 3D| 3E| 3F| 40| 41| 42| 43| 44| 57| 58| |*37| 46|*45| |e5E|e5F|e63| - * `---' `-----------------------------------------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | 29| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 7D| 0E| |e52|e47|e49| | 45|e35| 37| 4A| - * |-----------------------------------------------------------| |-----------| |---------------| - * | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 2B | |e53|e4F|e51| | 47| 48| 49| 4E| - * |-----------------------------------------------------------| `-----------' |---------------| - * | 3A | 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 00| 1C | | 4B| 4C| 4D| 7E| - * |-----------------------------------------------------------| ,---. |---------------| - * | 2A | 56| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35| 73| 36 | |e48| | 4F| 50| 51|e1C| - * |-----------------------------------------------------------| ,-----------. |---------------| - * | 1D|e5B| 38| 7B | 39 | 79 | 70 |e38|e5C|e5D|e1D| |e4B|e50|e4D| | 52| 53| 59| - * `-----------------------------------------------------------' `-----------' `---------------' - * e: E0-escaped codes - * *: special handling codes - */ -#define LAYOUT( \ - K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,K6E,K76, \ - K01, K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K57,K58, K54,K46,K55, K5D,K5E,K5F, \ - K29,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K7D,K0E, K71,K74,K77, K45,K7F,K37,K4A, \ - K0F,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B, K2B, K72,K75,K78, K47,K48,K49,K4E, \ - K3A,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28, K00,K1C, K4B,K4C,K4D,K7E, \ - K2A,K56,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,K35, K73,K36, K60, K4F,K50,K51,K6F, \ - K1D,K5A,K38,K7B, K39, K79,K70,K7C,K5B,K5C,K7A, K61,K62,K63, K52,K53,K59 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27 }, \ - { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ - { K40, K41, K42, K43, K44, K45, K46, K47 }, \ - { K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \ - { K60, K61, K62, K63, K64, K65, K66, K67 }, \ - { K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }, \ - { K70, K71, K72, K73, K74, K75, K76, K77 }, \ - { K78, K79, K7A, K7B, K7C, K7D, K7E, K7F } \ -} diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h deleted file mode 100644 index 2025cb43330..00000000000 --- a/keyboards/coseyfannitutti/mullet/config.h +++ /dev/null @@ -1,171 +0,0 @@ -/* -Copyright 2019 COSEYFANNITUTTI - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6969 -#define DEVICE_VER 0x0001 -#define MANUFACTURER coseyfannitutti -#define PRODUCT mullet -#define DESCRIPTION 65% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D1, B0, F0, F1 } -#define MATRIX_COL_PINS { B2, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D2, D3 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -#define RGB_DI_PIN D5 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/coseyfannitutti/mullet/info.json b/keyboards/coseyfannitutti/mullet/info.json deleted file mode 100644 index a6088863336..00000000000 --- a/keyboards/coseyfannitutti/mullet/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "mullet", - "url": "https://github.com/coseyfannitutti/mullet", - "maintainer": "coseyfannitutti", - "width": 16, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] - } - } -} \ No newline at end of file diff --git a/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c b/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c deleted file mode 100644 index 21ca2ffb636..00000000000 --- a/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FL 1 - - /* Qwerty - * .---------------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Del | - * |---------------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | PgUp| - * |---------------------------------------------------------------------------------------------+ - * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | PgDn| - * |---------------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | Fn | - * |---------------------------------------------------------------------------------------------+ - * | Ctrl | Win | Alt | Space | RAlt | Fn |||||Left |Down |Right| - * '---------------------------------------------------------------------------------------------' - */ - - /* FnLayer - * .---------------------------------------------------------------------------------------------. - * | ` ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Delete | | - * |---------------------------------------------------------------------------------------------+ - * | Tab |STATC|BRTHE|RNBOW|RESET| | | | | | |PrScr| | \ | Home| - * |---------------------------------------------------------------------------------------------+ - * | Caps |RGBH+|RGBS+|RGBB+| | | | | | | | | Enter | End | - * |---------------------------------------------------------------------------------------------+ - * | Shift |RGBH-|RGBS-|RGBB-| | | | |RGBM-|RGBM+|RGBTG| Shift |VolUp| | - * |---------------------------------------------------------------------------------------------+ - * | Ctrl | Win | Alt | | RAlt | Fn ||||| |VolDn| | - * '---------------------------------------------------------------------------------------------' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(_FL), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), - - [_FL] = LAYOUT( - /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc delete */ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, - /* tab Q W E R T Y U I O P [ ] \ pg up */ - KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_BSLS, KC_HOME, - /* caps A S D F G H J K L ; ' enter pg dn */ - KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_END, - /* shift Z X C V B N M , . / shift up fn */ - KC_LSFT, RGB_HUD, RGB_SAD, RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,RGB_RMOD, RGB_MOD, RGB_TOG, KC_RSFT, KC_VOLU, KC_TRNS, - /* ctrl win alt space alt fn left down right */ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) -}; diff --git a/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c b/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c deleted file mode 100644 index 07d939dfdc1..00000000000 --- a/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FL 1 - - /* Qwerty - * .---------------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | - * |---------------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | - * |---------------------------------------------------------------------------------------------+ - * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | PgUp| - * |---------------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | U | Pgdn| - * |---------------------------------------------------------------------------------------------+ - * | Ctrl | Win | Alt | Space | RAlt | FN ||||| L | D | R | - * '---------------------------------------------------------------------------------------------' - */ - - /* FnLayer - * .---------------------------------------------------------------------------------------------. - * | ` ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DELETE |PNTSC| - * |---------------------------------------------------------------------------------------------+ - * | Tab |STATC|BRTHE|RNBOW|RESET| | | | | | |PAUSE| | \ | | - * |---------------------------------------------------------------------------------------------+ - * | Caps |RGBH+|RGBS+|RGBB+| | | | | | | | INS | Enter | HOME| - * |---------------------------------------------------------------------------------------------+ - * | Shift |RGBH-|RGBS-|RGBB-| | | | |RGBM-|RGBM+|RGBTG| Shift |VOLUP| END | - * |---------------------------------------------------------------------------------------------+ - * | Ctrl | Win | Alt | | RAlt | FN ||||| L |VOLDN| R | - * '---------------------------------------------------------------------------------------------' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BL] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), - - [_FL] = LAYOUT( - /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc insert*/ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, - /* tab Q W E R T Y U I O P [ ] \ delete*/ - KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_BSLS, KC_TRNS, - /* caps A S D F G H J K L ; ' enter pg up*/ - KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, - /* shift Z X C V B N M , . / shift up pg dn*/ - KC_LSFT, RGB_HUD, RGB_SAD, RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,RGB_RMOD, RGB_MOD, RGB_TOG, KC_RSFT, KC_VOLU, KC_END, - /* ctrl win alt space alt fn left down right*/ - KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) -}; diff --git a/keyboards/coseyfannitutti/mullet/mullet.c b/keyboards/coseyfannitutti/mullet/mullet.c deleted file mode 100644 index 4f451f3dbb1..00000000000 --- a/keyboards/coseyfannitutti/mullet/mullet.c +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "mullet.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} diff --git a/keyboards/coseyfannitutti/mullet/mullet.h b/keyboards/coseyfannitutti/mullet/mullet.h deleted file mode 100644 index 848fd19226f..00000000000 --- a/keyboards/coseyfannitutti/mullet/mullet.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -#define _x_ KC_NO - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ -) { \ -{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ -{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ -{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ -{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ -{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, _x_, K4A, K4B, K4C, K4D, K4E} \ -} diff --git a/keyboards/coseyfannitutti/mullet/readme.md b/keyboards/coseyfannitutti/mullet/readme.md deleted file mode 100644 index 45c17fb5ba6..00000000000 --- a/keyboards/coseyfannitutti/mullet/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# mullet - -![mullet](https://i.imgur.com/EBOMbhH.jpg) - -A 68 key keyboard with USB Type-C and RGB underglow - -Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) -Hardware Supported: Mullet, atmega32u4 -Hardware Availability: https://github.com/coseyfannitutti/mullet - -Make example for this keyboard (after setting up your build environment): - - make coseyfannitutti/mullet:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk deleted file mode 100644 index fa02fe6fce9..00000000000 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h deleted file mode 100644 index 2174d64925a..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/config.h +++ /dev/null @@ -1,171 +0,0 @@ -/* -Copyright 2019 COSEYFANNITUTTI - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6666 -#define DEVICE_VER 0x0001 -#define MANUFACTURER coseyfannitutti -#define PRODUCT mulletpad -#define DESCRIPTION numpad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F1, F5, F6, F7 } -#define MATRIX_COL_PINS { F0, C7, C6, B6, } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -//#define RGB_DI_PIN D5 -//#ifdef RGB_DI_PIN -//#define RGBLIGHT_ANIMATIONS -//#define RGBLED_NUM 8 -//#define RGBLIGHT_HUE_STEP 8 -//#define RGBLIGHT_SAT_STEP 8 -//#define RGBLIGHT_VAL_STEP 8 -//#define RGBLIGHT_SLEEP -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/coseyfannitutti/mulletpad/info.json b/keyboards/coseyfannitutti/mulletpad/info.json deleted file mode 100644 index 7115bc75122..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "mulletpad", - "url": "https://github.com/coseyfannitutti/mulletpad", - "maintainer": "coseyfannitutti", - "width": 4, - "height": 5, - "layouts": { - "LAYOUT_numpad_5x4": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}] - } - } -} diff --git a/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c b/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c deleted file mode 100644 index ffdc1044dff..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -#define _BL 0 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BL] = LAYOUT_numpad_5x4( - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, - KC_P0, KC_PDOT, KC_PENT ) -}; diff --git a/keyboards/coseyfannitutti/mulletpad/mulletpad.c b/keyboards/coseyfannitutti/mulletpad/mulletpad.c deleted file mode 100644 index be335cc547c..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/mulletpad.c +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "mulletpad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} diff --git a/keyboards/coseyfannitutti/mulletpad/mulletpad.h b/keyboards/coseyfannitutti/mulletpad/mulletpad.h deleted file mode 100644 index 41c5c014a98..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/mulletpad.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2019 COSEYFANNITUTTI - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -#define _x_ KC_NO - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_numpad_5x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, \ - K20, K21, K22, K23, \ - K30, K31, K32, \ - K40, K42, K43 \ -) { \ -{ K00, K01, K02, K03, }, \ -{ K10, K11, K12, _x_, }, \ -{ K20, K21, K22, K23, }, \ -{ K30, K31, K32, _x_, }, \ -{ K40, _x_, K42, K43, }, \ -} diff --git a/keyboards/coseyfannitutti/mulletpad/readme.md b/keyboards/coseyfannitutti/mulletpad/readme.md deleted file mode 100644 index 9ee49ca96cb..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# mulletpad - -![mulletpad](https://i.imgur.com/MHKo5f5.png) - -A 17-key numpad with USB Type-C. - -Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) -Hardware Supported: Mulletpad, atmega32u4 -Hardware Availability: https://github.com/coseyfannitutti/mulletpad - -Make example for this keyboard (after setting up your build environment): - - make coseyfannitutti/mulletpad:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk deleted file mode 100644 index b3a473ef4b9..00000000000 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ /dev/null @@ -1,82 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -LAYOUTS = numpad_5x4 diff --git a/keyboards/cospad/config.h b/keyboards/cospad/config.h deleted file mode 100644 index 9844f2724a8..00000000000 --- a/keyboards/cospad/config.h +++ /dev/null @@ -1,91 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER KPREPUBLIC -#define PRODUCT COSPAD -#define DESCRIPTION QMK keyboard firmware for COSPAD - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Backlight configuration */ -#define BACKLIGHT_PIN F7 -#define BACKLIGHT_LEVELS 1 - -/* Underlight configuration */ -#define RGB_DI_PIN F6 -#define RGBLED_NUM 4 -#define RGBLIGHT_ANIMATIONS - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/cospad/cospad.c b/keyboards/cospad/cospad.c deleted file mode 100644 index e7ef71f874b..00000000000 --- a/keyboards/cospad/cospad.c +++ /dev/null @@ -1,33 +0,0 @@ - -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "cospad.h" - -#ifdef BACKLIGHT_ENABLE - -void backlight_init_ports(void) { - setPinOutput(F7); -} - -void backlight_set(uint8_t level) { - writePin(F7, !!level); -} - -void backlight_task(void) { - // do nothing - as default implementation of software PWM does not work -} - -#endif //BACKLIGHT_ENABLE diff --git a/keyboards/cospad/cospad.h b/keyboards/cospad/cospad.h deleted file mode 100644 index ad3ca0d6bc3..00000000000 --- a/keyboards/cospad/cospad.h +++ /dev/null @@ -1,130 +0,0 @@ - -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" -#define ___ KC_NO - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ - -/* COSPAD ortho matrix layout - * ,-------------------. - * | 00 | 01 | 02 | 03 | - * |----|----|----|----| - * | 10 | 11 | 12 | 13 | - * |----|----|----|----| - * | 20 | 21 | 22 | 23 | - * |----|----|----|----| - * | 30 | 31 | 32 | 33 | - * |----|----|----|----| - * | 40 | 41 | 42 | 43 | - * |----|----|----|----| - * | 50 | 51 | 52 | 53 | - * `-------------------' - */ -#define LAYOUT_ortho_6x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33, \ - k40, k41, k42, k43, \ - k50, k51, k52, k53 \ -) \ -{ \ - {k00, k01, k02, k03}, \ - {k10, k11, k12, k13}, \ - {k20, k21, k22, k23}, \ - {k30, k31, k32, k33}, \ - {k40, k41, k42, k43}, \ - {k50, k51, k52, k53} \ -} - -/* COSPAD gamepad matrix layout - * ,-------------------. - * | 00 | 01 | 02 | 03 | - * |----|----|----|----| - * | 10 | 11 | 12 | 13 | - * |----|----|----|----| - * | 20 | 21 | 22 | | - * |----|----|----| 23 | - * | 30 | 31 | 32 | | - * |----|----|----|----| - * | 40 | 41 | 42 | 43 | - * |----|----|----|----| - * | 50 | 51 | 52 | 53 | - * `-------------------' - */ -#define LAYOUT_gamepad_6x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, \ - k30, k31, k32, k23, \ - k40, k41, k42, k43, \ - k50, k51, k52, k53 \ -) \ -{ \ - {k00, k01, k02, k03}, \ - {k10, k11, k12, k13}, \ - {k20, k21, k22, k23}, \ - {k30, k31, k32, ___}, \ - {k40, k41, k42, k43}, \ - {k50, k51, k52, k53} \ -} - -/* COSPAD numpad matrix layout - * ,-------------------. - * | 00 | 01 | 02 | 03 | - * |----|----|----|----| - * | 10 | 11 | 12 | 13 | - * |----|----|----|----| - * | 20 | 21 | 22 | | - * |----|----|----| 23 | - * | 30 | 31 | 32 | | - * |----|----|----|----| - * | 40 | 41 | 42 | | - * |----|----|----| 43 | - * | 50 | 52 | | - * `-------------------' - */ -#define LAYOUT_numpad_6x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, \ - k30, k31, k32, k23, \ - k40, k41, k42, \ - k50, k52, k43 \ -) \ -{ \ - {k00, k01, k02, k03}, \ - {k10, k11, k12, k13}, \ - {k20, k21, k22, k23}, \ - {k30, k31, k32, ___}, \ - {k40, k41, k42, k43}, \ - {k50, ___, k52, ___} \ -} - -// Add backwards compatibility for existing keymaps -#define cospad_bl_led_on backlight_enable -#define cospad_bl_led_off backlight_disable -#define cospad_bl_led_togg backlight_toggle diff --git a/keyboards/cospad/info.json b/keyboards/cospad/info.json deleted file mode 100644 index c17f44f5259..00000000000 --- a/keyboards/cospad/info.json +++ /dev/null @@ -1,95 +0,0 @@ -{ - "keyboard_name": "Cospad", - "keyboard_folder": "cospad", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 6, - "layouts": { - "LAYOUT_numpad_6x4": { - "key_count": 21, - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"Tab", "x":1, "y":0}, - {"label":"Fn", "x":2, "y":0}, - {"label":"Back", "x":3, "y":0}, - {"label":"Num Lock", "x":0, "y":1}, - {"label":"/", "x":1, "y":1}, - {"label":"*", "x":2, "y":1}, - {"label":"-", "x":3, "y":1}, - {"label":"7", "x":0, "y":2}, - {"label":"8", "x":1, "y":2}, - {"label":"9", "x":2, "y":2}, - {"label":"4", "x":0, "y":3}, - {"label":"5", "x":1, "y":3}, - {"label":"6", "x":2, "y":3}, - {"label":"+", "x":3, "y":2, "h":2}, - {"label":"1", "x":0, "y":4}, - {"label":"2", "x":1, "y":4}, - {"label":"3", "x":2, "y":4}, - {"label":"0", "x":0, "y":5, "w":2}, - {"label":".", "x":2, "y":5}, - {"label":"Enter", "x":3, "y":4, "h":2} - ] - }, - - "LAYOUT_gamepad_6x4": { - "key_count": 23, - "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k10", "x":0, "y":1}, - {"label":"k11", "x":1, "y":1}, - {"label":"k12", "x":2, "y":1}, - {"label":"k13", "x":3, "y":1}, - {"label":"k20", "x":0, "y":2}, - {"label":"k21", "x":1, "y":2}, - {"label":"k22", "x":2, "y":2}, - {"label":"k30", "x":0, "y":3}, - {"label":"k31", "x":1, "y":3}, - {"label":"k32", "x":2, "y":3}, - {"label":"k23", "x":3, "y":2, "h":2}, - {"label":"k40", "x":0, "y":4}, - {"label":"k41", "x":1, "y":4}, - {"label":"k42", "x":2, "y":4}, - {"label":"k43", "x":3, "y":4}, - {"label":"k50", "x":0, "y":5}, - {"label":"k51", "x":1, "y":5}, - {"label":"k52", "x":2, "y":5}, - {"label":"k53", "x":3, "y":5} - ] - }, - - "LAYOUT_ortho_6x4": { - "key_count": 24, - "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k10", "x":0, "y":1}, - {"label":"k11", "x":1, "y":1}, - {"label":"k12", "x":2, "y":1}, - {"label":"k13", "x":3, "y":1}, - {"label":"k20", "x":0, "y":2}, - {"label":"k21", "x":1, "y":2}, - {"label":"k22", "x":2, "y":2}, - {"label":"k23", "x":3, "y":2}, - {"label":"k30", "x":0, "y":3}, - {"label":"k31", "x":1, "y":3}, - {"label":"k32", "x":2, "y":3}, - {"label":"k33", "x":3, "y":3}, - {"label":"k40", "x":0, "y":4}, - {"label":"k41", "x":1, "y":4}, - {"label":"k42", "x":2, "y":4}, - {"label":"k43", "x":3, "y":4}, - {"label":"k50", "x":0, "y":5}, - {"label":"k51", "x":1, "y":5}, - {"label":"k52", "x":2, "y":5}, - {"label":"k53", "x":3, "y":5} - ] - } - } -} diff --git a/keyboards/cospad/keymaps/default/keymap.c b/keyboards/cospad/keymaps/default/keymap.c deleted file mode 100644 index adcca112d23..00000000000 --- a/keyboards/cospad/keymaps/default/keymap.c +++ /dev/null @@ -1,60 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum layers { - _BL = 0, - _FL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap _BL: (Base Layer) Default Layer - * ,-------------------. - * |Esc |TAB | FN | BS | - * |----|----|----|----| - * | NL | / | * | - | - * |----|----|----|----| - * | 7 | 8 | 9 | | - * |----|----|----| + | - * | 4 | 5 | 6 | | - * |----|----|----|----| - * | 1 | 2 | 3 | | - * |----|----|----| En | - * | 0 | . | | - * `-------------------' - */ - [_BL] = LAYOUT_numpad_6x4( - KC_ESC, KC_TAB, MO(_FL), KC_BSPC, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, KC_PDOT, KC_PENT - ), - -/* Keymap _FL: Function Layer - * ,-------------------. - * |RGBT| | | | - * |----|----|----|----| - * |RGBM|RGBP|BTOG| | - * |----|----|----|----| - * |HUD |HUI |BON | | - * |----|----|----| | - * |SAD |SAI |BOFF| | - * |----|----|----|----| - * |VAD |VAS |BSTP| | - * |----|----|----| | - * | |RST | | - * `-------------------' - */ - [_FL] = LAYOUT_numpad_6x4( - RGB_TOG, _______, _______, _______, \ - RGB_MOD, RGB_M_P, BL_TOGG, _______, \ - RGB_HUD, RGB_HUI, BL_ON, \ - RGB_SAD, RGB_SAI, BL_OFF, _______, \ - RGB_VAD, RGB_VAI, BL_STEP, \ - _______, RESET, _______ - ), -}; diff --git a/keyboards/cospad/keymaps/detrus/keymap.c b/keyboards/cospad/keymaps/detrus/keymap.c deleted file mode 100644 index 93f95bb01ef..00000000000 --- a/keyboards/cospad/keymaps/detrus/keymap.c +++ /dev/null @@ -1,367 +0,0 @@ -#include QMK_KEYBOARD_H -#include "led.h" -#include - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -enum cospad_layers { - _QWERTY_LAYER, - _QWERTZ_LAYER, - _COLEMA_LAYER, - _DVORAK_LAYER, - _QWERTY_LOWER_LAYER, - _QWERTZ_LOWER_LAYER, - _COLEMA_LOWER_LAYER, - _DVORAK_LOWER_LAYER, - _RAISE_LAYER, - _ALTER_LAYER, -}; - -// To switch the default layer used for the layout, there are special keycodes. -// Which onces detected below serve to switch it. -enum cospad_keycodes { - QWERTY = SAFE_RANGE, - QWERTZ, - COLEMAK, - DVORAK -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Keymap _QWERTY_LAYER: Default layer - * ,-----------------------. - * | T | G | B | Alt | - * |-----|-----|-----|-----| - * | R | F | V | LOW | - * |-----|-----|-----|-----| - * | E | D | C | | - * |-----|-----|-----| Spc | - * | W | S | X | | - * |-----|-----|-----|-----| - * | Q | A | Z | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - * - * And it's LOWER layer - * ,-----------------------. - * | P | ; | / | Alt | - * |-----|-----|-----|-----| - * | O | L | . | LOW | - * |-----|-----|-----|-----| - * | I | K | , | | - * |-----|-----|-----| Ent | - * | U | J | M | | - * |-----|-----|-----|-----| - * | Y | H | N | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - */ - [_QWERTY_LAYER] = LAYOUT_gamepad_6x4( - KC_T, KC_G, KC_B, KC_LALT, \ - KC_R, KC_F, KC_V, MO(_QWERTY_LOWER_LAYER),\ - KC_E, KC_D, KC_C, \ - KC_W, KC_S, KC_X, KC_SPACE, \ - KC_Q, KC_A, KC_Z, MO(_RAISE_LAYER),\ - KC_GESC, KC_TAB, KC_LSFT, KC_LCTRL), - [_QWERTY_LOWER_LAYER] = LAYOUT_gamepad_6x4( - KC_P, KC_SCLN, KC_SLSH, KC_LALT, \ - KC_O, KC_L, KC_DOT, _______, \ - KC_I, KC_K, KC_COMM, \ - KC_U, KC_J, KC_M, KC_ENTER, \ - KC_Y, KC_H, KC_N, _______, \ - _______, _______, _______, _______), - - - - /* Keymap _QWERTZ_LAYER: Alternate default layer - * ,-----------------------. - * | T | G | B | Alt | - * |-----|-----|-----|-----| - * | R | F | V | LOW | - * |-----|-----|-----|-----| - * | E | D | C | | - * |-----|-----|-----| Spc | - * | W | S | X | | - * |-----|-----|-----|-----| - * | Q | A | Y | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - * - * And it's LOWER layer - * ,-----------------------. - * | P | ; | / | Alt | - * |-----|-----|-----|-----| - * | O | L | > | LOW | - * |-----|-----|-----|-----| - * | I | K | < | | - * |-----|-----|-----| Ent | - * | U | J | M | | - * |-----|-----|-----|-----| - * | Z | H | N | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - */ - [_QWERTZ_LAYER] = LAYOUT_gamepad_6x4( - KC_T, KC_G, KC_B, KC_LALT, \ - KC_R, KC_F, KC_V, MO(_QWERTZ_LOWER_LAYER),\ - KC_E, KC_D, KC_C, \ - KC_W, KC_S, KC_X, KC_SPACE, \ - KC_Q, KC_A, KC_Y, MO(_RAISE_LAYER),\ - KC_GESC, KC_TAB, KC_LSFT, KC_LCTRL), - [_QWERTZ_LOWER_LAYER] = LAYOUT_gamepad_6x4( - KC_P, KC_SCLN, KC_SLSH, KC_LALT, \ - KC_O, KC_L, KC_DOT, _______, \ - KC_I, KC_K, KC_COMM, \ - KC_U, KC_J, KC_M, KC_ENTER, \ - KC_Z, KC_H, KC_N, _______, \ - _______, _______, _______, _______), - - - - /* Keymap _COLEMA_LAYER: Alternate default layer - * ,-----------------------. - * | G | D | B | Alt | - * |-----|-----|-----|-----| - * | P | T | V | LOW | - * |-----|-----|-----|-----| - * | F | S | C | | - * |-----|-----|-----| Spc | - * | W | R | X | | - * |-----|-----|-----|-----| - * | Q | A | Z | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - * - * And it's LOWER layer - * ,-----------------------. - * | ; | O | / | Alt | - * |-----|-----|-----|-----| - * | Y | I | . | LOW | - * |-----|-----|-----|-----| - * | U | E | , | | - * |-----|-----|-----| Ent | - * | L | N | M | | - * |-----|-----|-----|-----| - * | J | H | K | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - */ - [_COLEMA_LAYER] = LAYOUT_gamepad_6x4( - KC_T, KC_D, KC_B, KC_LALT, \ - KC_R, KC_T, KC_V, MO(_COLEMA_LOWER_LAYER),\ - KC_E, KC_S, KC_C, \ - KC_W, KC_R, KC_X, KC_SPACE, \ - KC_Q, KC_A, KC_Z, MO(_RAISE_LAYER),\ - KC_GESC, KC_TAB, KC_LSFT, KC_LCTRL), - [_COLEMA_LOWER_LAYER] = LAYOUT_gamepad_6x4( - KC_SCLN, KC_O, KC_SLSH, _______, \ - KC_Y, KC_I, KC_DOT, _______, \ - KC_U, KC_E, KC_COMM, \ - KC_L, KC_N, KC_M, KC_ENTER, \ - KC_J, KC_H, KC_K, _______, \ - KC_F, KC_G, _______, _______), - - - - /* Keymap _DVORAK_LAYER: Alternate default layer - * ,-----------------------. - * | Y | I | X | Alt | - * |-----|-----|-----|-----| - * | P | U | K | LOW | - * |-----|-----|-----|-----| - * | . | E | J | | - * |-----|-----|-----| Spc | - * | , | O | Q | | - * |-----|-----|-----|-----| - * | ' | A | ; | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - * - * And it's LOWER layer - * ,-----------------------. - * | L | S | Z | Alt | - * |-----|-----|-----|-----| - * | R | N | V | LOW | - * |-----|-----|-----|-----| - * | C | T | W | | - * |-----|-----|-----| Ent | - * | G | H | M | | - * |-----|-----|-----|-----| - * | F | D | B | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - */ - [_DVORAK_LAYER] = LAYOUT_gamepad_6x4( - KC_Y, KC_I, KC_X, KC_LALT, \ - KC_P, KC_U, KC_K, MO(_DVORAK_LOWER_LAYER),\ - KC_DOT, KC_E, KC_J, \ - KC_COMM, KC_O, KC_A, KC_SPACE, \ - KC_QUOT, KC_A, KC_SCLN, MO(_RAISE_LAYER),\ - KC_GESC, KC_TAB, KC_LSFT, KC_LCTRL), - [_DVORAK_LOWER_LAYER] = LAYOUT_gamepad_6x4( - KC_L, KC_S, KC_Z, KC_LALT, \ - KC_R, KC_N, KC_V, _______, \ - KC_C, KC_T, KC_W, \ - KC_G, KC_H, KC_M, KC_ENTER,\ - KC_F, KC_D, KC_B, _______, \ - _______, _______, _______, _______), - - - - /* Keymap _RAISE_LAYER: Additional layer to access more - * ,-----------------------. - * | 5 | 0 | del | Alt | - * |-----|-----|-----|-----| - * | 4 | 9 | -> | LOW | - * |-----|-----|-----|-----| - * | 3 | 8 | <- | | - * |-----|-----|-----| Spc | - * | 2 | 7 | -> | | - * |-----|-----|-----|-----| - * | 1 | 6 | <- | RAI | - * |-----|-----|-----|-----| - * | Esc | Tab | Sft | Ctl | - * `-----------------------' - */ - [_RAISE_LAYER] = LAYOUT_gamepad_6x4( - KC_5, KC_0, KC_BSPC, _______, \ - KC_4, KC_9, KC_RIGHT, _______, \ - KC_3, KC_8, KC_UP, \ - KC_2, KC_7, KC_DOWN, _______, \ - KC_1, KC_6, KC_LEFT, _______, \ - _______, _______, _______, _______), - - - - /* Keymap _ALTER_LAYER: Function layer used to control the Leds - * and use media buttons - * ,----------------------------------------. - * | Val Dec | Bl Toggle | Qwertz | Super | - * |---------|------------|---------|-------| - * | Val Inc | Bl Off | Qwerty | | - * |---------|------------|---------|-------| - * | Sat Dec | Bl On | Colemak | | - * |---------|------------|---------| | - * | Sat Inc | RGB Toggle | Dvorak | | - * |---------|------------|---------|-------| - * | Hue Dec | RGB Next | Vol Dwn | | - * |---------|------------|---------|-------| - * | Hue Inc | RGB Prev | Vol Up | Reset | - * `----------------------------------------' - */ - [_ALTER_LAYER] = LAYOUT_gamepad_6x4( - RGB_VAD, BL_TOGG, QWERTZ, KC_LGUI, \ - RGB_VAI, BL_OFF, QWERTY, _______, \ - RGB_SAD, BL_ON, COLEMAK, \ - RGB_SAI, RGB_TOG, DVORAK, _______, \ - RGB_HUD, RGB_MOD, KC_VOLD, _______, \ - RGB_HUI, RGB_RMOD, KC_VOLU, RESET), -}; - -// Makes sure to update the good tri-layer if a layer changes -uint32_t layer_state_set_user(uint32_t state) { - switch (biton32(default_layer_state)) { - case _QWERTY_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER); - break; - case _QWERTZ_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER); - break; - case _COLEMA_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER); - break; - case _DVORAK_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER); - break; - } - return state; -} - -// Makes the tri-layer -uint32_t default_layer_state_set_kb(uint32_t state) { - switch (biton32(state)) { - case _QWERTY_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER); - layer_move(_QWERTY_LAYER); - break; - case _QWERTZ_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER); - layer_move(_QWERTZ_LAYER); - break; - case _COLEMA_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER); - layer_move(_COLEMA_LAYER); - break; - case _DVORAK_LAYER: - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER); - state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER); - layer_move(_DVORAK_LAYER); - break; - } - return state; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BL_TOGG: - if (record->event.pressed) { - cospad_bl_led_togg(); - } - return false; - case BL_ON: - if (record->event.pressed) { - cospad_bl_led_on(); - } - return false; - case BL_OFF: - if (record->event.pressed) { - cospad_bl_led_off(); - } - return false; - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY_LAYER); - print("switched to QWERTY layout\n"); - } - return false; - break; - case QWERTZ: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTZ_LAYER); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMA_LAYER); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK_LAYER); - } - return false; - break; - default: - return true; - } -} diff --git a/keyboards/cospad/readme.md b/keyboards/cospad/readme.md deleted file mode 100644 index 2e9add691f1..00000000000 --- a/keyboards/cospad/readme.md +++ /dev/null @@ -1,21 +0,0 @@ -COSPAD -=== - -A DIY Keypad Kit sold by KPRepublic, runs TKG natively. - -Keyboard Maintainer: QMK Community -Hardware Supported: COSPAD -Hardware Availability: [KPrepublic on Aliexpress](https://aliexpress.com/item/cospad-Custom-Mechanical-Keyboard-Kit-up-tp-24-keys-Supports-TKG-TOOLS-Underglow-RGB-PCB-20/32818383873.html) - -Only supports on and off for the backlight leds, as they are not connected to a PWM pin. - -Supported Layouts: - -![Numpad Layout of COSPAD](https://i.imgur.com/t03lXJ4.png) -![Ortholinear Layout of COSPAD](https://i.imgur.com/mliUcCc.png) - -Make example for this keyboard (after setting up your build environment): - - make cospad:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cospad/rules.mk b/keyboards/cospad/rules.mk deleted file mode 100644 index 61c7a5182ce..00000000000 --- a/keyboards/cospad/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -BACKLIGHT_CUSTOM_DRIVER = yes -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - - -LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/crawlpad/config.h b/keyboards/crawlpad/config.h deleted file mode 100755 index d51ad174442..00000000000 --- a/keyboards/crawlpad/config.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6070 -#define DEVICE_VER 0x0001 -#define MANUFACTURER WoodKeys.click -#define PRODUCT CrawlPad -#define DESCRIPTION ATX Keycrawl 2017 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F0, F1, F4, F5 } -#define MATRIX_COL_PINS { D4, D5, D6, D7 } -#define UNUSED_PINS - -/* Pins for custom per-row LEDs. Should be changed to use named pins. */ -#define LED_ROW_PINS { 8, 9, 10, 11 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 3 -#endif diff --git a/keyboards/crawlpad/crawlpad.c b/keyboards/crawlpad/crawlpad.c deleted file mode 100755 index d48f0a409ff..00000000000 --- a/keyboards/crawlpad/crawlpad.c +++ /dev/null @@ -1 +0,0 @@ -#include "crawlpad.h" diff --git a/keyboards/crawlpad/crawlpad.h b/keyboards/crawlpad/crawlpad.h deleted file mode 100755 index 572907c2563..00000000000 --- a/keyboards/crawlpad/crawlpad.h +++ /dev/null @@ -1,16 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define LAYOUT_ortho_4x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33 \ -) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 } \ -} - diff --git a/keyboards/crawlpad/info.json b/keyboards/crawlpad/info.json deleted file mode 100644 index b243ead304d..00000000000 --- a/keyboards/crawlpad/info.json +++ /dev/null @@ -1,29 +0,0 @@ -{ - "keyboard_name": "Crawlpad", - "url": "", - "maintainer": "colemarkham", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "layout": [ - {"label":"7", "x":0, "y":0}, - {"label":"8", "x":1, "y":0}, - {"label":"9", "x":2, "y":0}, - {"label":"+", "x":3, "y":0}, - {"label":"4", "x":0, "y":1}, - {"label":"5", "x":1, "y":1}, - {"label":"6", "x":2, "y":1}, - {"label":"-", "x":3, "y":1}, - {"label":"1", "x":0, "y":2}, - {"label":"2", "x":1, "y":2}, - {"label":"3", "x":2, "y":2}, - {"label":"*", "x":3, "y":2}, - {"label":"Fn", "x":0, "y":3}, - {"label":"0", "x":1, "y":3}, - {"label":".", "x":2, "y":3}, - {"label":"Enter", "x":3, "y":3} - ] - } - } -} diff --git a/keyboards/crawlpad/keymaps/default/keymap.c b/keyboards/crawlpad/keymaps/default/keymap.c deleted file mode 100755 index ec985739f11..00000000000 --- a/keyboards/crawlpad/keymaps/default/keymap.c +++ /dev/null @@ -1,115 +0,0 @@ -#include QMK_KEYBOARD_H - -enum custom_keycodes { - BL1 = SAFE_RANGE, - BL2, - BL3, - BL4 -}; - -const uint8_t LED_PINS[] = LED_ROW_PINS; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_ortho_4x4( - KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_P4, KC_P5, KC_P6, KC_PMNS, - KC_P1, KC_P2, KC_P3, KC_PAST, - MO(1), KC_P0, KC_PDOT, KC_ENT - ), - - [1] = LAYOUT_ortho_4x4( - KC_NLCK, BL1, KC_TRNS, KC_PSLS, - RESET, BL2, KC_TRNS, KC_TRNS, - KC_TRNS, BL3, KC_TRNS, KC_TRNS, - KC_TRNS, BL4, KC_TRNS, KC_TRNS - ), - -}; - -void set_led(int idx, bool enable) { - uint8_t pin = LED_PINS[idx]; - if (enable) { - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); - } else { - /* PORTx &= ~n */ - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BL1: - if (record->event.pressed) { - PORTB |= (1 << 4); - } else { - PORTB &= ~(1 << 4); - } - return false; - case BL2: - if (record->event.pressed) { - PORTB |= (1 << 5); - } else { - PORTB &= ~(1 << 5); - } - return false; - case BL3: - if (record->event.pressed) { - PORTB |= (1 << 6); - } else { - PORTB &= ~(1 << 6); - } - return false; - case BL4: - if (record->event.pressed) { - PORTB |= (1 << 7); - } else { - PORTB &= ~(1 << 7); - } - return false; - } - return true; -} - -void matrix_init_user(void) { - /* set LED row pins to output and low */ - DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7); - PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7); -} - -void matrix_scan_user(void) { -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/crawlpad/readme.md b/keyboards/crawlpad/readme.md deleted file mode 100644 index 9eb01b7b616..00000000000 --- a/keyboards/crawlpad/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Crawlpad - -![Crawlpad](https://i.imgur.com/8BnztWo.jpg) - -A 4x4 macropad/numpad, exclusively availabe at Keycrawl events. - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) -Hardware Supported: Crawlpad -Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details. - -Make example for this keyboard (after setting up your build environment): - - make crawlpad:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/crawlpad/rules.mk b/keyboards/crawlpad/rules.mk deleted file mode 100755 index 2dda38e2013..00000000000 --- a/keyboards/crawlpad/rules.mk +++ /dev/null @@ -1,58 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # [Crawlpad] Custom backlighting code is used, so this should not be enabled -AUDIO_ENABLE = no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below -RGBLIGHT_ENABLE = no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port. - -LAYOUTS = ortho_4x4 diff --git a/keyboards/cu24/config.h b/keyboards/cu24/config.h deleted file mode 100644 index 7bb49816b9d..00000000000 --- a/keyboards/cu24/config.h +++ /dev/null @@ -1,187 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Yiancar/CapsUnlocked -#define PRODUCT CU24 -#define DESCRIPTION A luxurious fully customisable numpad - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 } -#define MATRIX_COL_PINS { F0, F1, D0, D1 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Backlight */ -#define BACKLIGHT_PIN B5 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -/* RGB Glow */ -#define RGB_DI_PIN F4 // The pin the LED strip is connected to -#define RGBLED_NUM 5 // Number of LEDs in your strip -#define RGBLIGHT_ANIMATIONS - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/cu24/cu24.c b/keyboards/cu24/cu24.c deleted file mode 100644 index 0c976f076f3..00000000000 --- a/keyboards/cu24/cu24.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "cu24.h" diff --git a/keyboards/cu24/cu24.h b/keyboards/cu24/cu24.h deleted file mode 100644 index d329182d238..00000000000 --- a/keyboards/cu24/cu24.h +++ /dev/null @@ -1,61 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef CU24_H -#define CU24_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_grid( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33, \ - k40, k41, k42, k43, \ - k50, k51, k52, k53 \ -) \ -{ \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, k33 }, \ - { k40, k41, k42, k43 }, \ - { k50, k51, k52, k53 } \ -} - -#define LAYOUT_numpad( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, \ - k40, k41, k42, k43, \ - k51, k52 \ -) \ -{ \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, KC_NO }, \ - { k40, k41, k42, k43 }, \ - { KC_NO, k51, k52, KC_NO } \ -} - - - -#endif diff --git a/keyboards/cu24/info.json b/keyboards/cu24/info.json deleted file mode 100644 index 7cd9a3f1f90..00000000000 --- a/keyboards/cu24/info.json +++ /dev/null @@ -1,16 +0,0 @@ -{ - "keyboard_name": "cu24", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 6, - "layouts": { - "LAYOUT_grid": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}] - }, - - "LAYOUT_numpad": { - "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4}, {"x":1, "y":4}, {"label":".", "x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}] - } - } -} \ No newline at end of file diff --git a/keyboards/cu24/keymaps/default/keymap.c b/keyboards/cu24/keymaps/default/keymap.c deleted file mode 100644 index bbec2907ad1..00000000000 --- a/keyboards/cu24/keymaps/default/keymap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_grid( /* Base */ - KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, \ - MO(1) , KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7 , KC_P8 , KC_P9 , KC_PPLS, \ - KC_P4 , KC_P5 , KC_P6 , KC_PPLS, \ - KC_P1 , KC_P2 , KC_P3 , KC_PENT, \ - KC_P0 , KC_P0 , KC_PDOT, KC_PENT -), - -[1] = LAYOUT_grid( /* FN */ - RGB_TOG, RGB_MOD, BL_STEP, BL_BRTG, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, \ - RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, RESET , KC_TRNS -), -}; - -/* Use this function to add macros */ -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} diff --git a/keyboards/cu24/keymaps/default/readme.md b/keyboards/cu24/keymaps/default/readme.md deleted file mode 100644 index 5528d6c0d85..00000000000 --- a/keyboards/cu24/keymaps/default/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -https://imgur.com/a/vpHFj - -![CU24 Layout Image](https://imgur.com/X1c1qeY) - -# Default CU24 Layout - -This is the default layout that comes flashed on every CU24. It is like a normal numpad, -with all the led customization on the Fn layer. - -See [All Layouts](https://imgur.com/trwO7dN) for all supported configurations! \ No newline at end of file diff --git a/keyboards/cu24/readme.md b/keyboards/cu24/readme.md deleted file mode 100644 index ca3f3f5a040..00000000000 --- a/keyboards/cu24/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# CU24 - -![CU24](https://geekhack.org/index.php?action=dlattach;topic=93289.0;attach=185492;image) - -A luxurious 24 key keypad with various layouts. Includes RGB underglow, backlight and an aluminium, brass and nylon case. - -Keyboard Maintainer: [Yiancar](https://github.com/yiancar) -Hardware Supported: PCB v1.0 (uses a 32u4) -Hardware Availability: [caps-unlocked.com](http://caps-unlocked.com/) - -Make example for this keyboard (after setting up your build environment): - - make CU24:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk deleted file mode 100644 index 86f1a8479c5..00000000000 --- a/keyboards/cu24/rules.mk +++ /dev/null @@ -1,69 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/cu75/config.h b/keyboards/cu75/config.h deleted file mode 100644 index e01f947a020..00000000000 --- a/keyboards/cu75/config.h +++ /dev/null @@ -1,146 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6062 -#define DEVICE_VER 0x0001 -#define MANUFACTURER LFKeyboards/CapsUnlocked -#define PRODUCT CU75 -#define DESCRIPTION A luxurious fully customisable 75% - -#define DIODE_DIRECTION COL2ROW -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 -#define MATRIX_ROW_PINS {F1, B7, B3, D2, D3, B2} -#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, B1, B0, F0} -#define UNUSED_PINS {} - -#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile -#define RGBLED_NUM 24 // Number of LEDs -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 8 -#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/cu75/cu75.c b/keyboards/cu75/cu75.c deleted file mode 100644 index 6dc28984545..00000000000 --- a/keyboards/cu75/cu75.c +++ /dev/null @@ -1,179 +0,0 @@ -#include -#include -#include -#include "cu75.h" -#include "keymap.h" -#include "debug.h" -#include "../lfkeyboards/issi.h" -#include "../lfkeyboards/TWIlib.h" -#include "../lfkeyboards/lighting.h" - -#ifdef AUDIO_ENABLE -float test_sound[][2] = SONG(STARTUP_SOUND); -#include